opcodes/ChangeLog

   1 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
   2
   3         * arm-opc.c: Disassembly of thumb ldsb/ldsh
   4         instructions changed to ldrsb/ldrsh.
   5
   6 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
   7
   8         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
   9         target addresses for 'jal' and 'j'.
  10
  11 2000-05-10  Geoff Keating  <geoffk@cygnus.com>
  12
  13         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
  14         also available in common mode when powerpc syntax is being used.
  15
  16 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
  17
  18         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
  19         (dummy_print_address): Ditto.
  20
  21 2000-05-04  Timothy Wall  <twall@cygnus.com>
  22
  23         * tic54x-opc.c: New.
  24         * tic54x-dis.c: New.
  25         * disassemble.c (disassembler): Add ARCH_tic54x.
  26         * configure.in: Added tic54x target.
  27         * configure: Ditto.
  28         * Makefile.am: Add tic54x dependencies.
  29         * Makefile.in: Ditto.
  30
  31 2000-05-03  J.T. Conklin  <jtc@redback.com>
  32
  33         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
  34         vector unit operands.
  35         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
  36         unit instruction formats.
  37         (PPCVEC): New macro, mask for vector instructions.
  38         (powerpc_operands): Add table entries for above operand types.
  39         (powerpc_opcodes): Add table entries for vector instructions.
  40
  41         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
  42         (print_insn_little_powerpc): Likewise.
  43         (print_insn_powerpc): Prepend 'v' when printing vector registers.
  44
  45 Sun Apr 23 17:54:14 2000  Denis Chertykov  <denisc@overta.ru>
  46
  47         * avr-dis.c (reg_fmul_d): New. Extract destination register from
  48         FMUL instruction.
  49         (reg_fmul_r): New. Extract source register from FMUL instruction.
  50         (reg_muls_d): New. Extract destination register from MULS instruction.
  51         (reg_muls_r): New. Extract source register from MULS instruction.
  52         (reg_movw_d): New. Extract destination register from MOVW instruction.
  53         (reg_movw_r): New. Extract source register from MOVW instruction.
  54         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
  55         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
  56
  57 Mon Apr 24 15:21:35 2000  Clinton Popetz  <cpopetz@cygnus.com>
  58
  59         * configure.in: Add bfd_powerpc_64_arch.
  60         * disassemble.c (disassembler): Use print_insn_big_powerpc for
  61         64 bit code.
  62
  63 2000-04-24  Nick Clifton  <nickc@cygnus.com>
  64
  65         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
  66         field.
  67
  68 2000-04-22  Timothy Wall  <twall@cygnus.com>
  69
  70         * ia64-gen.c (general): Add an ordered table of primary
  71         opcode names, as well as priority fields to disassembly data
  72         structures to enforce a preferred disassembly format based on the
  73         ordering of the opcode tables.
  74         (load_insn_classes): Show a useful message if IC tables are missing.
  75         (load_depfile): Ditto.
  76         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
  77         distinguish preferred disassembly.
  78         * ia64-opc-f.c: Reorder some insn for preferred disassembly
  79         format.  Fix incorrect flag on fma.s/fma.s.s0.
  80         * ia64-opc.c: Scan *all* disassembly matches and use the one with
  81         the highest priority.
  82         * ia64-opc-b.c: Use more abbreviations.
  83         * ia64-asmtab.c: Regenerate.
  84
  85 Fri Apr 21 16:03:39 2000  Jason Eckhardt  <jle@cygnus.com>
  86
  87         * hppa-dis.c (extract_16): New function.
  88         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
  89         new operand types l,y,&,fe,fE,fx.
  90
  91 Fri Apr 21 13:20:53 2000  Richard Henderson  <rth@cygnus.com>
  92                           David Mosberger  <davidm@hpl.hp.com>
  93                           Timothy Wall <twall@cygnus.com>
  94                           Bob Manson  <manson@charmed.cygnus.com>
  95                           Jim Wilson  <wilson@cygnus.com>
  96
  97         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
  98         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
  99         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
 100         ia64-asmtab.c.
 101         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
 102         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
 103         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
 104         * Makefile.in: Rebuild.
 105         * configure Rebuild.
 106         * configure.in (bfd_ia64_arch): New target.
 107         * disassemble.c (ARCH_ia64): Define.
 108         (disassembler): Support ARCH_ia64.
 109         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
 110         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
 111         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
 112         ia64-war.tbl, ia64-waw.tbl): New files.
 113
 114 2000-04-20  Alexandre Oliva  <aoliva@cygnus.com>
 115
 116         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
 117         (disassemble): Use them.
 118
 119 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
 120
 121         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
 122         * Makefile.am: Update dependencies.
 123         * Makefile.in: Regenerate.
 124
 125 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 126
 127         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
 128         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
 129         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
 130         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
 131         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
 132         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
 133         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
 134         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
 135         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
 136         ansidecl.h as sysdep.h includes it.
 137
 138 Fri Apr  7 15:56:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 139
 140         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
 141         --enable-build-warnings option.
 142         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
 143         * Makefile.in, configure: Re-generate.
 144
 145 Wed Apr  5 22:28:18 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
 146
 147         * sh-opc.c (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
 148         stc GBR,@-<REG_N> is available for arch_sh1_up.
 149         Group parallel processing insn with identical mnemonics together.
 150         Make three-operand psha / pshl come first.
 151
 152 Wed Apr  5 22:05:40 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
 153
 154         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
 155         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
 156         (sh_arg_type): Add A_PC.
 157         (sh_table): Update entries using immediates.  Add repeat.
 158         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
 159         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
 160
 161 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
 162
 163         * po/opcodes.pot: Regenerate.
 164
 165         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
 166         (DEP): Quote when passing vars to sub-make.  Add warning message
 167         to end.
 168         (DEP1): Rewrite for "gcc -MM".
 169         (CLEANFILES): Add DEP2.
 170         Update dependencies.
 171         * Makefile.in: Regenerate.
 172
 173 2000-04-03  Denis Chertykov  <denisc@overta.ru>
 174
 175         * avr-dis.c: Syntax cleanup.
 176         (add0fff): Print the pc relative address as a signed number.
 177         (add03f8): Likewise.
 178
 179 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
 180
 181         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
 182         the parameter ATTRIBUTE_UNUSED.
 183         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
 184
 185 2000-04-01  Alexandre Oliva  <aoliva@cygnus.com>
 186
 187         * m10300-opc.c: SP-based offsets are always unsigned.
 188
 189 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
 190
 191         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
 192         [branch always] instead of "undefined".
 193
 194 2000-03-27  Nick Clifton  <nickc@cygnus.com>
 195
 196         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
 197         short instructions, from end of list of long instructions.
 198
 199 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
 200
 201         * Makefile.am (CFILES): Add avr-dis.c.
 202         (ALL_MACHINES): Add avr-dis.lo.
 203
 204 2000-03-27  Alan Modra  <alan@linuxcare.com>
 205
 206         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
 207         truncate integers.
 208         (print_insn_avr): Call function via pointer in K&R compatible way.
 209         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
 210         add0fff, add03f8): Convert to old style function declaration and
 211         add prototype.
 212         (avrdis_opcode): Add prototype.
 213
 214 2000-03-27  Denis Chertykov  <denisc@overta.ru>
 215
 216         * avr-dis.c: New file.  AVR disassembler.
 217         * configure.in (bfd_avr_arch): New architecture support.
 218         * disassemble.c: Likewise.
 219         * configure: Regenerate.
 220
 221 Mon Mar  6 19:52:05 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
 222
 223         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
 224
 225 2000-03-02  J"orn Rennecke <amylaar@cygnus.co.uk>
 226
 227         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
 228         flag to determine if operand is pc-relative.
 229         * d30v-opc.c:
 230         (d30v_format_table):
 231         (REL6S3): Renamed from IMM6S3.
 232         Added flag OPERAND_PCREL.
 233         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
 234         added flag OPERAND_PCREL.
 235         (IMM12S3U): Replaced with REL12S3.
 236         (SHORT_D2, LONG_D): Delay target is pc-relative.
 237         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
 238         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
 239         using the REL* operands.
 240         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
 241         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
 242         LONG_Db, using REL* operands.
 243         (SHORT_U, SHORT_A5S): Removed stray alternatives.
 244         (d30v_opcode_table): Use new *r formats.
 245
 246 2000-02-28  Nick Clifton  <nickc@cygnus.com>
 247
 248         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
 249         'signed_overflow_ok_p'.
 250
 251 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
 252
 253         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
 254         name of the libtool directory.
 255         * Makefile.in: Rebuild.
 256
 257 2000-02-24  Nick Clifton  <nickc@cygnus.com>
 258
 259         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
 260         (cgen_clear_signed_overflow_ok): New function.
 261         (cgen_signed_overflow_ok_p): New function.
 262
 263 2000-02-23  Andrew Haley  <aph@cygnus.com>
 264
 265         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
 266         m32r-ibld.c,m32r-opc.h: Rebuild.
 267
 268 2000-02-23  Linas Vepstas <linas@linas.org>
 269
 270         * i370-dis.c, i370-opc.c: New.
 271
 272         * disassemble.c (ARCH_i370): Define.
 273         (disassembler): Handle it.
 274
 275         * Makefile.am: Add support for Linux/IBM 370.
 276         * configure.in: Likewise.
 277
 278         * Makefile.in: Regenerate.
 279         * configure: Likewise.
 280
 281 2000-02-22  Chandra Chavva   <cchavva@cygnus.com>
 282
 283         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
 284         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
 285         procedure.
 286
 287 1999-12-30  Andrew Haley  <aph@cygnus.com>
 288
 289         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
 290         force gp32 to zero.
 291         * mips-opc.c (G6): New define.
 292         (mips_builtin_op): Add "move" definition for -gp32.
 293
 294 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
 295
 296         From Grant Erickson <gerickso@Brocade.COM>:
 297         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
 298
 299 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
 300
 301         * dis-buf.c (buffer_read_memory): Change `length' param and all int
 302         vars to unsigned.
 303
 304 Thu Feb 17 00:18:12 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
 305
 306         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
 307         (print_insn_ppi): Likewise.
 308         (print_insn_shx): Use info->mach to select appropriate insn set.
 309         Add support for sh-dsp.  Remove FD_REG_N support.
 310         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
 311         (sh_arg_type): Likewise.  Remove FD_REG_N.
 312         (sh_dsp_reg_nums): New enum.
 313         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
 314         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
 315         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
 316         (arch_sh3_dsp_up): Likewise.
 317         (sh_opcode_info): New field: arch.
 318         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
 319         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
 320
 321 2000-02-14  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 322
 323         * arm-dis.c: Change flavor name from atpcs-special to
 324         special-atpcs to prevent name conflict in gdb.
 325         (get_arm_regname_num_options, set_arm_regname_option,
 326         get_arm_regnames): New functions.  API to access the several
 327         flavor of register names.  Note: Used by gdb.
 328         (print_insn_thumb): Use the register name entry from the currently
 329         selected flavor for LR and PC.
 330
 331 2000-02-10  Nick Clifton  <nickc@cygnus.com>
 332
 333         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
 334         classes.
 335         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
 336         "mulsh.h" instructions.
 337         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
 338         classes.
 339         (print_insn_mcore): Add support for little endian targets.
 340         Add support for MULSH and OPSR classes.
 341
 342 2000-02-07  Nick Clifton  <nickc@cygnus.com>
 343
 344         * arm-dis.c (parse_arm_diassembler_option): Rename again.
 345         Previous delat did not take.
 346
 347 2000-02-03  Timothy Wall  <twall@redhat.com>
 348
 349         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
 350         to adjust target address bounds checking and calculate the
 351         appropriate octet offset into data.
 352
 353 2000-01-27  Nick Clifton  <nickc@redhat.com>
 354
 355         * arm-dis.c: (parse_disassembler_option): Rename to
 356         parse_arm_disassembler_option and allow to be exported.
 357
 358         * disassemble.c (disassembler_usage): New function: Print out any
 359         target specific disassembler options.
 360         Call arm_disassembler_options() if the ARM architecture is being
 361         supported.
 362
 363         * arm-dis.c (NUM_ELEM): Define this macro if not already
 364         defined.
 365         (arm_regname): New struct type for ARM register names.
 366         (arm_toggle_regnames): Delete.
 367         (parse_disassembler_option): Use register name structure.
 368         (print_insn): New function: Combines duplicate code found in
 369         print_insn_big_arm and print_insn_little_arm.
 370         (print_insn_big_arm): Call print_insn.
 371         (print_insn_little_arm): Call print_insn.
 372         (print_arm_disassembler_options): Display list of supported,
 373         ARM specific disassembler options.
 374
 375 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
 376
 377         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
 378         ARM_STT_16BIT flag as Thumb code symbols.
 379
 380         * arm-dis.c (printf_insn_little_arm): Ditto.
 381
 382 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
 383
 384         * arm-dis.c (printf_insn_thumb): Prevent double dumping
 385         of raw thumb instructions.
 386
 387 2000-01-20  Nick Clifton  <nickc@cygnus.com>
 388
 389         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
 390
 391 2000-01-03  Nick Clifton  <nickc@cygnus.com>
 392
 393         * arm-dis.c (streq): New macro.
 394         (strneq): New macro.
 395         (force_thumb): ew local variable.
 396         (parse_disassembler_option): New function: Parse a single, ARM
 397         specific disassembler command line switch.
 398         (parse_disassembler_option): Call parse_disassembler_option to
 399         parse individual command line switches.
 400         (print_insn_big_arm): Check force_thumb.
 401         (print_insn_little_arm): Check force_thumb.
 402
 403 1999-12-27  Alan Modra  <alan@spri.levels.unisa.edu.au>
 404
 405         * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
 406
 407 Wed Dec  1 03:34:53 1999  Jeffrey A Law  (law@cygnus.com)
 408
 409         * m10300-opc.c, m10300-dis.c: Add am33 support.
 410
 411 Wed Nov 24 20:29:58 1999  Jeffrey A Law  (law@cygnus.com)
 412
 413         * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
 414         (print_insn_hppa): Handle 'B' operand.
 415
 416 1999-11-22  Nick Clifton  <nickc@cygnus.com>
 417
 418         * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
 419
 420 1999-11-18  Gavin Romig-Koch  <gavin@cygnus.com>
 421
 422         * mips-opc.c (I5): New.
 423         (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
 424         madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
 425         pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
 426
 427 Mon Nov 15 19:34:58 1999  Donald Lindsay  <dlindsay@cygnus.com>
 428
 429         * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
 430         * arm-opc.h (print_insn_arm): Added comment documenting
 431         the 'X' format just added to arm-dis.c.
 432
 433 1999-11-15  Gavin Romig-Koch  <gavin@cygnus.com>
 434
 435         * mips-opc.c (la): Create a version that just uses addiu directly.
 436         (dla): Expand to daddiu if possible.
 437
 438 1999-11-11  Nick Clifton  <nickc@cygnus.com>
 439
 440         * mips-opc.c: Add ssnop pattern.
 441
 442 1999-11-01  Gavin Romig-Koch  <gavin@cygnus.com>
 443
 444         * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
 445
 446 1999-10-29  Nick Clifton  <nickc@cygnus.com>
 447
 448         * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
 449         (d30v_format_tab): Define the SHORT_AR format.
 450
 451 1999-10-28  Nick Clifton  <nickc@cygnus.com>
 452
 453         * mcore-dis.c: Remove spurious code introduced in previous delta.
 454
 455 1999-10-27  Scott Bambrough  <scottb@netwinder.org>
 456
 457         * arm-dis.c: Include sysdep.h to prevent compile time warnings.
 458
 459 1999-10-18  Michael Meissner  <meissner@cygnus.com>
 460
 461         * alpha-opc.c (alpha_operands): Fill in missing initializer.
 462         (alpha_num_operands): Convert to unsigned.
 463         (alpha_num_opcodes): Ditto.
 464         (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
 465         (insert_rca): Ditto.
 466         (insert_za): Ditto.
 467         (insert_zb): Ditto.
 468         (insert_zc): Ditto.
 469         (extract_bdisp): Ditto.
 470         (extract_jhint): Ditto.
 471         (extract_ev6hwjhint): Ditto.
 472
 473 Sun Oct 10 01:48:01 1999  Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
 474
 475         * hppa-dis.c (print_insn_hppa):  Add new codes 'cc', 'cd', 'cC',
 476         'co', '@'.
 477
 478         * hppa-dis.c (print_insn_hppa): Removed unused args.  Fix '?W'.
 479
 480         * hppa-dis.c (print_insn_hppa):  Implement codes "?N", "?Q".
 481
 482 Thu Oct  7 00:12:43 MDT 1999    Diego Novillo <dnovillo@cygnus.com>
 483
 484         * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
 485         rac/rachi instructions.
 486         (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
 487         slae, st and st2w.
 488
 489 1999-10-04  Doug Evans  <devans@casey.cygnus.com>
 490
 491         * fr30-asm.c,fr30-desc.h: Rebuild.
 492         * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild.  Add m32rx support.
 493         * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
 494
 495 1999-09-29  Nick Clifton  <nickc@cygnus.com>
 496
 497         * sh-opc.h: Fix bit patterns for several load and store
 498         instructions.
 499
 500 Thu Sep 23 08:27:20 1999  Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
 501
 502         * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
 503         cleaner code using completer prefixes.  Add 'Y'.
 504
 505 Sun Sep 19 10:41:27 1999  Jeffrey A Law  (law@cygnus.com)
 506
 507         * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
 508
 509         * hppa-dis.c (extract_22): New function.
 510
 511         * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
 512
 513         * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
 514
 515         * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
 516
 517         * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
 518
 519         * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
 520
 521         * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
 522
 523         * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
 524
 525         * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
 526
 527         * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
 528
 529 Sat Sep 18 11:36:12 1999  Jeffrey A Law  (law@cygnus.com)
 530
 531         * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
 532
 533         * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
 534         operand.
 535
 536         * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
 537
 538         * hppa-dis.c: (print_insn_hppa): Add missing break after
 539         FP register case.
 540
 541         * hppa-dis.c: Finish constifying various completers, register
 542         names, etc etc.
 543
 544 1999-09-14  Michael Meissner  <meissner@cygnus.com>
 545
 546         * configure.in (Canonicalization of target names): Remove adding
 547         ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
 548         generates $ac_config_sub with a ${CONFIG_SHELL} already.
 549         * configure: Regenerate.
 550
 551 Tue Sep  7 13:50:32 1999  Jeffrey A Law  (law@cygnus.com)
 552
 553         * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
 554
 555         * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
 556
 557 1999-09-07  Nick Clifton  <nickc@cygnus.com>
 558
 559         * sh-opc.h: Add mulu.w and muls.w patterns.  These are the correct
 560         names for the mulu and muls patterns.
 561
 562 1999-09-04  Steve Chamberlain  <sac@pobox.com>
 563
 564         * pj-opc.c: New file.
 565         * pj-dis.c: New file.
 566         * disassemble.c (disassembler): Handle bfd_arch_pj.
 567         * configure.in: Handle bfd_pj_arch.
 568         * Makefile.am: Rebuild dependencies.
 569         (CFILES): Add pj-dis.c and pj-opc.c.
 570         (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
 571         * configure, Makefile.in: Rebuild.
 572
 573 1999-09-04  H.J. Lu  <hjl@gnu.org>
 574
 575         * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
 576
 577 Mon Aug 30 18:56:14 1999  Richard Henderson  <rth@cygnus.com>
 578
 579         * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
 580
 581 1999-08-04  Doug Evans  <devans@casey.cygnus.com>
 582
 583         * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
 584         * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
 585         * m32r-opinst.c: Rebuild.
 586
 587 Sat Aug 28 00:27:24 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 588
 589         * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'.  Prefix float
 590         register args by 'f'.
 591
 592         * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
 593
 594         * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
 595         extract_10U_store):  New.
 596         (print_insn_hppa):  Add new completers.
 597
 598         * hppa-dis.c (signed_unsigned_names,mix_half_names,
 599         saturation_names):  New.
 600         (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
 601
 602         * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
 603
 604         * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
 605
 606         * hppa-dis.c (print_insn_hppa):  Look at next arg instead of bits
 607         to decide to print a space.
 608
 609 1999-08-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
 610
 611         * i386-dis.c: Add AMD athlon instruction support.
 612
 613 1999-08-10  Ian Lance Taylor  <ian@zembu.com>
 614
 615         From Wally Iimura <iimura@microunity.com>:
 616         * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
 617         overflow at end of address space.
 618         (generic_print_address): Use sprintf_vma.
 619
 620 1999-08-08  Ian Lance Taylor  <ian@zembu.com>
 621
 622         * Makefile.am: Rename .dep* files to DEP*.  Change DEP variable to
 623         MKDEP.  Rebuild dependencies.
 624         * Makefile.in: Rebuild.
 625
 626 Fri Aug  6 09:46:35 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 627
 628         * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
 629         add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
 630         unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
 631         (print_insn_hppa): Add 64 bit condition completers.
 632
 633 Thu Aug  5 16:59:58 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 634
 635         * hppa-dis.c (print_insn_hppa): Change condition args to use
 636         '?' prefix.
 637
 638 Wed Jul 28 04:33:58 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 639
 640         * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
 641         code.
 642
 643 1999-07-21  Ian Lance Taylor  <ian@zembu.com>
 644
 645         From Mark Elbrecht:
 646         * configure.bat: Remove; obsolete.
 647
 648 1999-07-11  Ian Lance Taylor  <ian@zembu.com>
 649
 650         * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
 651         (generic_strcat_address): Add cast to avoid warning.
 652         * i386-dis.c: Initialize all structure fields to avoid warnings.
 653         Add ATTRIBUTE_UNUSED as appropriate.
 654
 655 1999-07-08  Jakub Jelinek  <jj@ultra.linux.cz>
 656
 657         * sparc-dis.c (print_insn_sparc): Differentiate between
 658         addition and oring when guessing symbol for comment.
 659
 660 1999-07-05  Nick Clifton  <nickc@cygnus.com>
 661
 662         * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
 663         constant.
 664
 665 1999-06-23  Alan Modra  <alan@spri.levels.unisa.edu.au>
 666
 667         * i386-dis.c: Mention intel mode specials in macro char comment.
 668
 669 1999-06-21  Ian Lance Taylor  <ian@zembu.com>
 670
 671         * alpha-dis.c: Don't include <stdlib.h>.
 672         * arm-dis.c: Include "sysdep.h".
 673         * tic30-dis.c: Don't include <stdlib.h> or <string.h>.  Include
 674         "sysdep.h".
 675         * Makefile.am: Rebuild dependencies.
 676         * Makefile.in: Rebuild.
 677
 678 1999-06-16  Nick Clifton  <nickc@cygnus.com>
 679
 680         * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
 681         SWIs.
 682
 683 1999-06-14  Nick Clifton  <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
 684
 685         * arm-dis.c (arm_regnames): Turn into a pointer to a register
 686         name set.
 687         (arm_regnames_standard): New variable: Array of ARM register
 688         names according to ARM instruction set nomenclature.
 689         (arm_regnames_apcs): New variable: Array of ARM register names
 690         according to ARM Procedure Call Standard.
 691         (arm_regnames_raw): New variable: Array of ARM register names
 692         using just 'r' and the register number.
 693         (arm_toggle_regnames): New function: Toggle the chosen register set
 694         naming scheme.
 695         (parse_disassembler_options): New function: Parse any target
 696         disassembler command line options.
 697         (print_insn_big_arm): Call parse_disassembler_options if any
 698         are defined.
 699         (print_insn_little_arm): Call parse_disassembler_options if any
 700         are defined.
 701
 702 1999-06-13  Ian Lance Taylor  <ian@zembu.com>
 703
 704         * i386-dis.c (FWAIT_OPCODE): Define.
 705         (used_prefixes): New static variable.
 706         (fetch_data): Don't print an error message if we have already
 707         fetched some bytes successfully.
 708         (ckprefix): Clear used_prefixes.  Use FWAIT_OPCODE, not 0x9b.
 709         (prefix_name): New static function.
 710         (print_insn_i386): If setjmp fails, indicating a data error, but
 711         we have managed to fetch some bytes, print the first one as a
 712         prefix or a .byte pseudo-op.  If fwait is followed by a non
 713         floating point instruction, print the first prefix.  Set
 714         used_prefixes when prefixes are used.  If any prefixes were not
 715         used after disassembling the instruction, print the first prefix
 716         instead of printing the instruction.
 717         (putop): Set used_prefixes when prefixes are used.
 718         (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
 719         (OP_DIR, OP_SIMD_Suffix): Likewise.
 720
 721 1999-06-07  Jakub Jelinek  <jj@ultra.linux.cz>
 722
 723         * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
 724         Support signx %reg, clruw %reg.
 725
 726 1999-06-07  Jakub Jelinek  <jj@ultra.linux.cz>
 727
 728         * sparc-opc.c: Add aliases Solaris as supports.
 729
 730 Mon Jun  7 12:04:52 1999  Andreas Schwab  <schwab@issan.cs.uni-dortmund.de>
 731
 732         * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
 733         * Makefile.in: Regenerated.
 734
 735 1999-06-03  Philip Blundell  <philb@gnu.org>
 736
 737         * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
 738         when target is PC-relative.
 739
 740 1999-05-28  Linus Nordberg  <linus.nordberg@canit.se>
 741
 742         * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC.  Add MACM/MSACM.  Add
 743         MOVE MACSR,CCR.
 744
 745         * m68k-dis.c (fetch_arg): Add places `n', `o'.
 746
 747         * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
 748         Add mcf5206e to appropriate instructions.
 749         Add alias for MAC, MSAC.
 750
 751         * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
 752         `N'.
 753
 754         * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
 755         macw, remsl, remul for mcf5307.  Change mcf5200 --> mcf.
 756
 757         * m68k-dis.c: Add format `u' and places `h', `m', `M'.
 758
 759 1999-05-18  Alan Modra  <alan@spri.levels.unisa.edu.au>
 760
 761         * i386-dis.c (Ed): Define.
 762         (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
 763         (Rw): Remove.
 764         (OP_rm): Rename to OP_Rd.
 765         (ONE): Remove.
 766         (OP_ONE): Remove.
 767         (putop): Add const to template and p.
 768         (print_insn_x86): Delete.
 769         (print_insn_i386): Merge old function print_insn_x86.  Add const
 770         to dp.
 771         (struct dis386): Add const to name.
 772         (dis386_att, dis386_intel): Add const.
 773         (dis386_twobyte_att, dis386_twobyte_intel): Add const.
 774         (names32, names16, names8, names_seg, index16): Add const.
 775         (grps, prefix_user_table, float_reg): Add const.
 776         (float_mem_att, float_mem_intel): Add const.
 777         (oappend): Add const to s.
 778         (OP_REG): Add const to s.
 779         (ptr_reg): Add const to s.
 780         (dofloat): Add const to dp.
 781         (OP_C): Don't skip modrm, it's now done in OP_Rd.
 782         (OP_D): Ditto.
 783         (OP_T): Ditto.
 784         (OP_Rd): Check for valid mod.  Call Op_E to print.
 785         (OP_E): Handle d_mode arg.  Check for bad sfence,lea,lds etc.
 786         (OP_MS): Check for valid mod.  Call Op_EM to print.
 787         (OP_3DNowSuffix): Set obufp and use oappend rather than
 788         strcat.  Call BadOp() for errors.
 789         (OP_SIMD_Suffix): Likewise.
 790         (BadOp): New function.
 791
 792 1999-05-12  Alan Modra  <alan@spri.levels.unisa.edu.au>
 793
 794         * i386-dis.c (dis386_intel): Remove macro chars, except for
 795         jEcxz.  Change cWtR and cRtd to cW and cR.
 796         (dis386_twobyte_intel): Remove macro chars here too.
 797         (putop): Handle R and W macros for intel mode.
 798
 799         * i386-dis.c (SIMD_Fixup): New function.
 800         (dis386_twobyte_att): Use it on movlps and movhps, and change
 801         Ev to EX on these insns.  Change movmskps Ev, XM to Gv, EX.
 802         (dis386_twobyte_intel): Same here.
 803
 804         * i386-dis.c (Av): Remove.
 805         (Ap): remove lptr.
 806         (lptr): Remove.
 807         (OPSIMD): Define.
 808         (OP_SIMD_Suffix): New function.
 809         (OP_DIR): Remove dead code.
 810         (eAX_reg..eDI_reg): Renumber.
 811         (onebyte_has_modrm): Table numbering comments.
 812         (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
 813         (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
 814         checks.  Print error on invalid dp->bytemode2.  Remove simd_cmp,
 815         and handle SIMD cmp insns in OP_SIMD_Suffix.
 816         (info->bytes_per_line): Bump from 5 to 6.
 817         (OP_None): Remove.
 818         (OP_E): Use INTERNAL_DISASSEMBLER_ERROR.  Handle sfence.
 819         (OP_3DNowSuffix): Ensure mnemonic index unsigned.
 820
 821         PIII SIMD support from Doug Ledford <dledford@redhat.com>
 822         * i386-dis.c (XM, EX, None): Define.
 823         (OP_XMM, OP_EX, OP_None): New functions.
 824         (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
 825         (GRP14): Rename to GRPAMD.
 826         (GRP*): Add USE_GROUPS flag.
 827         (PREGRP*): Define.
 828         (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
 829         (twobyte_has_modrm): Add SIMD entries.
 830         (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
 831         (grps): Add SIMD insns.
 832         (print_insn_x86): New vars uses_f3_prefix and simd_cmp.  Don't
 833         oappend repz if uses_f3_prefix.  Add code to handle new groups for
 834         SIMD insns.
 835
 836         From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
 837         * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
 838         operand from Av to Jv.
 839
 840 1999-05-07  Nick Clifton  <nickc@cygnus.com>
 841
 842         * mcore-dis.c (print_insn_mcore): Use .short to display
 843         unidentified instructions, not .word.
 844
 845 1999-04-26  Tom Tromey  <tromey@cygnus.com>
 846
 847         * aclocal.m4, configure: Updated for new version of libtool.
 848
 849 1999-04-14  Doug Evans  <devans@casey.cygnus.com>
 850
 851         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
 852         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
 853
 854 Mon Apr 12 23:46:17 1999  Jeffrey A Law  (law@cygnus.com)
 855
 856         * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
 857         instructions.
 858
 859 1999-04-10  Doug Evans  <devans@casey.cygnus.com>
 860
 861         * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
 862         * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
 863
 864 1999-04-06  Ian Lance Taylor  <ian@zembu.com>
 865
 866         * opintl.h (LC_MESSAGES): Never define.
 867
 868 1999-04-04  Ian Lance Taylor  <ian@zembu.com>
 869
 870         * i386-dis.c (intel_syntax, open_char, close_char): Make static.
 871         (separator_char, scale_char): Likewise.
 872         (print_insn_x86): Likewise.
 873         (print_insn_i386): Likewise.  Add declaration.
 874
 875 1999-03-26  Doug Evans  <devans@casey.cygnus.com>
 876
 877         * fr30-dis.c: Rebuild.
 878         * m32r-dis.c: Rebuild.
 879
 880 1999-03-23  Ian Lance Taylor  <ian@zembu.com>
 881
 882         * m68k-opc.c: Change compare instructions to use "@s" rather than
 883         ";s" when used with an immediate operand.
 884
 885 1999-03-22  Doug Evans  <devans@casey.cygnus.com>
 886
 887         * cgen-opc.c (cgen_set_cpu): Delete.
 888         (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
 889         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
 890         Rebuild.
 891         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
 892         Rebuild.
 893         * po/opcodes.pot: Rebuild.
 894
 895 1999-03-16  Martin Hunt  <hunt@cygnus.com>
 896
 897         * d30v-opc.c (mvtsys): Remove FLAG_LKR.
 898
 899 1999-03-11  Doug Evans  <devans@casey.cygnus.com>
 900
 901         * cgen-opc.c (cgen_set_cpu): New arg `isa'.  All callers updated.
 902         (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
 903         (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
 904         * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
 905         * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
 906         * m32r-opinst.c: Rebuild.
 907
 908 1999-02-25  Doug Evans  <devans@casey.cygnus.com>
 909
 910         * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
 911         (cgen_hw_lookup_by_num): Rewrite.
 912         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
 913         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
 914         * m32r-opinst.c: Rebuild.
 915
 916 Sat Feb 13 14:06:19 1999  Richard Henderson  <rth@cygnus.com>
 917
 918         * alpha-opc.c: Add sqrt+flags patterns.  Add EV6 PALcode insns.
 919         (insert_jhint): Fix insertion mask.
 920         * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
 921
 922 1999-02-10  Doug Evans  <devans@casey.cygnus.com>
 923
 924         * Makefile.in: Rebuild.
 925
 926 1999-02-09  Doug Evans  <devans@casey.cygnus.com>
 927
 928         * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
 929         * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
 930         * Makefile.am: Remove references to them.
 931         (HFILES): Add fr30-desc.h,m32r-desc.h.
 932         (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
 933         m32r-opinst.c.
 934         (ALL_MACHINES): Update.
 935         * configure.in: Redo handling of cgen_files.
 936         (bfd_i960_arch): Delete i960c-*.lo files.
 937         * configure: Regenerate.
 938         * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
 939         (hash_insn_array): Rewrite.
 940         * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
 941         (hash_insn_array): Rewrite.
 942         * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
 943         (cgen_lookup_insn,cgen_get_insn_operands): Define here.
 944         (cgen_lookup_get_insn_operands): Ditto.
 945         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
 946         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
 947         * po/POTFILES.in: Rebuild.
 948         * po/opcodes.pot: Rebuild.
 949
 950 Fri Feb  5 00:04:24 1999  Ian Lance Taylor  <ian@cygnus.com>
 951
 952         * Makefile.am: Rebuild dependencies.
 953         (HFILES): Add fr30-opc.h.
 954         (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
 955         * Makefile.in: Rebuild.
 956
 957         * configure.in: Change AC_PREREQ to 2.13.  Remove AM_CYGWIN32.
 958         Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
 959         AC_PROG_INSTALL.
 960         * acconfig.h: Remove.
 961         * configure: Rebuild with current autoconf/automake.
 962         * aclocal.m4: Likewise.
 963         * config.in: Likewise.
 964         * Makefile.in: Likewise.
 965
 966 Thu Feb  4 13:48:52 1999  Ian Lance Taylor  <ian@cygnus.com>
 967
 968         * m68k-opc.c: Correct move (not movew) to status word on 5200.
 969
 970 Mon Feb  1 20:54:36 1999  Catherine Moore  <clm@cygnus.com>
 971
 972         * disassemble.c (disassembler):  Handle bfd_mach_i386_i386_intel_syntax.
 973         * i386-dis.c (x_mode):  Define.
 974         (dis386):  Remove.
 975         (dis386_att):  New.
 976         (dis386_intel):  New.
 977         (dis386_twobyte):  Remove.
 978         (dis386_twobyte_att):  New.
 979         (dis386_twobyte_intel):  New.
 980         (print_insn_x86):  Use new arrays.
 981         (float_mem):  Remove.
 982         (float_mem_intel):  New.
 983         (float_mem_att):  New.
 984         (dofloat):  Use new float_mem arrays.
 985         (print_insn_i386_att):  New.
 986         (print_insn_i386_intel):  New.
 987         (print_insn_i386):  Handle bfd_mach_i386_i386_intel_syntax.
 988         (putop):  Handle intel syntax.
 989         (OP_indirE):  Handle intel syntax.
 990         (OP_E):  Handle intel syntax.
 991         (OP_I):  Handle intel syntax.
 992         (OP_sI):  Handle intel syntax.
 993         (OP_OFF):  Handle intel syntax.
 994
 995
 996
 997 1999-01-27  Doug Evans  <devans@casey.cygnus.com>
 998
 999         * fr30-opc.h,fr30-opc.c: Rebuild.
1000         * i960c-opc.h,i960c-opc.c: Rebuild.
1001         * m32r-opc.c: Rebuild.
1002
1003 Tue Jan 19 18:01:54 1999  David Taylor  <taylor@texas.cygnus.com>
1004
1005         * hppa-dis.c: revert HP merge changes until HP gives us
1006         an updated file.
1007
1008 1999-01-19  Nick Clifton  <nickc@cygnus.com>
1009
1010         * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
1011         offsets as well as symbloic address.
1012
1013 Tue Jan 19 10:51:01 1999  David Taylor  <taylor@texas.cygnus.com>
1014
1015         * hppa-dis.c: fix comments and some indentation.
1016
1017 1999-01-12  Doug Evans  <devans@casey.cygnus.com>
1018
1019         * fr30-opc.c,i960c-opc.c: Regenerate.
1020
1021 1999-01-11  Doug Evans  <devans@casey.cygnus.com>
1022
1023         * fr30-opc.c: Regenerate.
1024
1025 1999-01-06  Doug Evans  <devans@casey.cygnus.com>
1026
1027         * m32r-dis.c: Regenerate.
1028
1029 1999-01-05  Doug Evans  <devans@casey.cygnus.com>
1030
1031         * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
1032         * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
1033         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1034
1035 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1036
1037         * configure.in: Require autoconf 2.12.1 or higher.
1038
1039 1998-12-30  Gavin Romig-Koch  <gavin@cygnus.com>
1040
1041         * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
1042
1043 Wed Dec 16 16:17:49 1998  Dave Brolley  <brolley@cygnus.com>
1044
1045         * fr30-opc.c: Regenerated.
1046
1047 1998-12-16  Gavin Romig-Koch  <gavin@cygnus.com>
1048
1049         * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
1050
1051 1998-12-15  Dave Brolley  <brolley@cygnus.com>
1052
1053         * fr30-opc.c,fr30-opc.h: Regenerated.
1054
1055 1998-12-14  Dave Brolley  <brolley@cygnus.com>
1056
1057         * fr30-opc.c,fr30-opc.h: Regenerated.
1058
1059 Thu Dec 10 18:39:46 1998  Dave Brolley  <brolley@cygnus.com>
1060
1061         * fr30-opc.c,fr30-opc.h: Regenerated.
1062
1063 Thu Dec 10 12:49:24 1998  Doug Evans  <devans@canuck.cygnus.com>
1064
1065         * m32r-opc.c: Regenerate.
1066
1067 Tue Dec  8 13:56:18 1998  David Taylor  <taylor@texas.cygnus.com>
1068
1069         * dis-buf.c (generic_strcat_address): reformat to GNU coding
1070         conventions.  change sprintf call to an sprintf_vma call.
1071
1072 Tue Dec  8 13:12:44 1998  Dave Brolley  <brolley@cygnus.com>
1073
1074         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1075
1076 Tue Dec  8 10:50:46 1998  David Taylor  <taylor@texas.cygnus.com>
1077
1078         The following changes were made by
1079         Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
1080         David Taylor <taylor@texas.cygnus.com>, and
1081         Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
1082         merge in changes by HP; HP did not create ChangeLog entries.
1083
1084         * dis-buf.c (generic_strcat_address): new function.
1085
1086         * hppa-dis.c: Changes to improve hppa disassembly.
1087           Changed formatting in : reg_names, fp_reg_names,control_reg,
1088           New variables : sign_extension_names, deposit_names, conversion_names
1089             float_test_names, compare_cond_names_double, add_cond_names_double,
1090             logical_cond_names_double, unit_cond_names_double,
1091             branch_push_pop_names, saturation_names, shift_names, mix_names,
1092           New Macros :   GET_COMPL_O, GET_PUSH_POP,MERGED_REG
1093           Move some definitions to libhppa.h: GET_FIELD, GET_BIT
1094           (fput_const): renamed as fput_hex_const
1095           (print_insn_hppa):
1096            - use the macros fputs_filtered and
1097              fput_decimal_const whenever possible; calls to sign_extend require
1098              2 params -- add a missing second param of 0.
1099            - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
1100              architecture version number of current machine. HP folks are
1101              trying to handle situation where the target program was compiled
1102              for PA 1.x (32-bit), but is running on a PA 2.0 machine and
1103              visa versa.
1104            - added new cases : 'g', 'B', 'm'
1105            - added cases specifically for PA 2.0
1106            - changed the following cases : '"', 'n', 'N', 'p', 'Z',
1107            - calls to fput_const become calls to fput_hex_const
1108
1109 1998-12-07  James E Wilson  <wilson@wilson-pc.cygnus.com>
1110
1111         * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
1112         (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
1113         (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
1114         * Makefile.in: Rebuilt.
1115         * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
1116         i960-dis.c to ta.
1117         * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
1118         * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
1119
1120 Mon Dec  7 14:33:44 1998  Dave Brolley  <brolley@cygnus.com>
1121
1122         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1123
1124 Sun Dec  6 14:06:48 1998  Ian Lance Taylor  <ian@cygnus.com>
1125
1126         * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
1127
1128         * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
1129         From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
1130
1131 Fri Dec  4 17:45:51 1998  Doug Evans  <devans@canuck.cygnus.com>
1132
1133         * fr30-opc.c: Regenerate.
1134
1135 Fri Dec  4 17:08:08 1998  Dave Brolley  <brolley@cygnus.com>
1136
1137         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1138
1139 Thu Dec  3 14:26:20 1998  Dave Brolley  <brolley@cygnus.com>
1140
1141         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1142
1143 Thu Dec  3 00:09:17 1998  Doug Evans  <devans@canuck.cygnus.com>
1144
1145         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
1146
1147 1998-11-30  Doug Evans  <devans@casey.cygnus.com>
1148
1149         * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
1150         CGEN_INSN_BASE_VALUE.
1151         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1152         * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
1153
1154 Thu Nov 26 11:26:32 1998  Dave Brolley  <brolley@cygnus.com>
1155
1156         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
1157
1158 Tue Nov 24 11:20:54 1998  Dave Brolley  <brolley@cygnus.com>
1159
1160         * fr30-asm.c,fr30-dis.c: Regenerated.
1161
1162 Mon Nov 23 18:28:48 1998  Dave Brolley  <brolley@cygnus.com>
1163
1164         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1165
1166 1998-11-20  Doug Evans  <devans@tobor.to.cygnus.com>
1167
1168         * fr30-opc.c: Regenerated.
1169
1170 Thu Nov 19 16:02:46 1998  Dave Brolley  <brolley@cygnus.com>
1171
1172         * fr30-opc.c: Regenerated.
1173         * fr30-opc.h: Regenerated.
1174         * fr30-dis.c: Regenerated.
1175         * fr30-asm.c: Regenerated.
1176
1177 Thu Nov 19 07:54:15 1998  Doug Evans  <devans@charmed.cygnus.com>
1178
1179         * mips-opc.c (sync.p,sync.l): Swap insn values.
1180
1181 1998-11-19  Doug Evans  <devans@tobor.to.cygnus.com>
1182
1183         * fr30-opc.c: Regenerate.
1184
1185 Wed Nov 18 21:36:37 1998  Dave Brolley  <brolley@cygnus.com>
1186
1187         * fr30-opc.c: Regenerated.
1188         * fr30-opc.h: Regenerated.
1189
1190 1998-11-18  Doug Evans  <devans@casey.cygnus.com>
1191
1192         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
1193         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
1194
1195 Wed Nov 18 11:30:04 1998  Dave Brolley  <brolley@cygnus.com>
1196
1197         * fr30-opc.c: Regenerated.
1198
1199 Mon Nov 16 19:21:48 1998  Dave Brolley  <brolley@cygnus.com>
1200
1201         * fr30-opc.c: Regenerated.
1202         * fr30-opc.h: Regenerated.
1203         * fr30-dis.c: Regenerated.
1204         * fr30-asm.c: Regenerated.
1205
1206 Thu Nov 12 19:24:18 1998  Dave Brolley  <brolley@cygnus.com>
1207
1208         * po/opcodes.pot: Regenerated.
1209         * fr30-opc.c: Regenerated.
1210         * fr30-opc.h: Regenerated.
1211         * fr30-dis.c: Regenerated.
1212         * fr30-asm.c: Regenerated.
1213
1214 Tue Nov 10 15:26:27 1998  Nick Clifton  <nickc@cygnus.com>
1215
1216         * disassemble.c (disassembler): Add support for FR30 target.
1217
1218 Tue Nov 10 11:00:04 1998  Doug Evans  <devans@canuck.cygnus.com>
1219
1220         * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
1221         * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
1222
1223 Mon Nov  9 18:22:55 1998  Dave Brolley  <brolley@cygnus.com>
1224
1225         * po/opcodes.pot: Regenerate.
1226         * po/POTFILES.in: Regenerate.
1227         * fr30-opc.c: Regenerate.
1228         * fr30-opc.h: Regenerate.
1229
1230 Fri Nov  6 17:21:38 1998  Doug Evans  <devans@canuck.cygnus.com>
1231
1232         * m32r-asm.c: Regenerate.
1233
1234 Wed Nov  4 18:46:47 1998  Dave Brolley  <brolley@cygnus.com>
1235
1236         * configure.in: Added case for bfd_fr30_arch.
1237         * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
1238         (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
1239         (CLEANFILES): Added stamp-fr30.
1240         (FR30_DEPS): Added.
1241         * fr30-asm.c: New file.
1242         * fr30-dis.c: New file.
1243         * fr30-opc.c: New file.
1244         * fr30-opc.h: New file.
1245         * po/POTFILES.in: Regenerated
1246         * po/opcodes.pot: Regenerated
1247
1248 Mon Nov  2 15:05:33 1998  Geoffrey Noer  <noer@cygnus.com>
1249
1250         * configure.in: detect cygwin* instead of cygwin32*
1251         * configure: regenerate
1252
1253 Tue Oct 27 08:58:37 1998  Gavin Romig-Koch  <gavin@cygnus.com>
1254
1255         * mips-opc.c (IS_M): Added.
1256
1257 Mon Oct 19 13:03:19 1998  Doug Evans  <devans@seba.cygnus.com>
1258
1259         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1260
1261 Fri Oct  9 14:01:56 1998  Doug Evans  <devans@seba.cygnus.com>
1262
1263         * m32r-opc.h,m32r-opc.c: Regenerate.
1264
1265 Sun Oct  4 21:01:44 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1266
1267         * i386-dis.c (OP_3DNowSuffix): New static function.
1268         (OPSUF): Define.
1269         (GRP14): Define.
1270         (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
1271         (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
1272         (insn_codep): New static variable.
1273         (print_insn_x86): Init insn_codep after prefixes.
1274         (grps): Add GRP14 entries for prefetch, prefetchw.
1275         (OP_REG): Reformat.
1276
1277         From Jeff B Epler <jepler@usgs.gov>
1278         * i386-dis.c (Suffix3DNow): New table.
1279
1280 Wed Sep 30 10:17:50 1998  Nick Clifton  <nickc@cygnus.com>
1281
1282         * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1283
1284 Mon Sep 28 14:35:43 1998  Martin M. Hunt  <hunt@cygnus.com>
1285
1286         * d10v-dis.c (print_operand): If num is nonzero, then
1287         add OPERAND_ACC1, not OPERAND_ACC0.
1288
1289 Thu Sep 24 09:20:03 1998  Nick Clifton  <nickc@cygnus.com>
1290
1291         * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1292         insns.
1293
1294 Tue Sep 22 17:55:14 1998  Nick Clifton  <nickc@cygnus.com>
1295
1296         * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1297         class.
1298
1299 Tue Sep 15 15:14:45 1998  Doug Evans  <devans@canuck.cygnus.com>
1300
1301         * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1302
1303 1998-09-09  Michael Meissner  <meissner@cygnus.com>
1304
1305         * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1306         to/from SPRs.
1307
1308 Fri Sep  4 19:42:59 1998  Nick Clifton  <nickc@cygnus.com>
1309
1310         * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1311         object files.
1312         (print_insn_little_arm): Detect Thumb symbols in elf object
1313         files.
1314
1315 Sat Aug 29 22:24:09 1998  Richard Henderson  <rth@cygnus.com>
1316
1317         * alpha-dis.c (print_insn_alpha): Use the machine type to
1318         decide which PALcode set to include.
1319
1320 Sun Aug 23 02:16:18 1998  Richard Henderson  <rth@cygnus.com>
1321
1322         * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1323
1324 Fri Aug 21 16:07:52 1998  Nick Clifton  <nickc@cygnus.com>
1325
1326         * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1327         MSUB and MSUBS instructions.
1328
1329 Thu Aug 13 16:23:04 1998  Ian Lance Taylor  <ian@cygnus.com>
1330
1331         * ppc-opc.c (powerpc_operands): Omit parens around additions in
1332         operand name macros.
1333
1334 Wed Aug 12 14:00:38 1998  Ian Lance Taylor  <ian@cygnus.com>
1335
1336         From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1337         * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1338         +, -, and d for ColdFire.
1339
1340         From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1341         * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1342         (extract_mbe): Likewise.
1343
1344 Wed Aug 12 11:11:34 1998  Jeffrey A Law  (law@cygnus.com)
1345
1346         * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1347
1348         * m10300-opc.c: First cut at UDF instructions.
1349
1350 Mon Aug 10 14:08:22 1998  Doug Evans  <devans@canuck.cygnus.com>
1351
1352         * m32r-opc.c: Regenerate (remove semantic descriptions).
1353
1354 Mon Aug 10 12:51:12 1998  Catherine Moore  <clm@cygnus.com>
1355
1356         * arm-dis.c (print_insn_big_arm):  Fix indentation.
1357         (print_insn_little_arm): Likewise.
1358
1359 Sun Aug  9 20:17:28 1998  Catherine Moore  <clm@cygnus.com>
1360
1361         * arm-dis.c (print_insn_big_arm):  Check for thumb symbol
1362         attributes.
1363         (print_insn_little_arm): Likewise.
1364
1365 Mon Aug  3 12:43:16 1998  Doug Evans  <devans@seba.cygnus.com>
1366
1367         Move all global state data into opcode table struct, and treat
1368         opcode table as something that is "opened/closed".
1369         * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1370         (cgen_asm_init): Delete.
1371         (cgen_set_parse_operand_fn): New function.
1372         * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1373         (cgen_dis_init): Delete.
1374         * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1375         (cgen_current_{opcode_table_mach,endian}): Delete.
1376         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1377
1378 Thu Jul 30 21:41:10 1998  Frank Ch. Eigler  <fche@cygnus.com>
1379
1380         * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1381         instructions.
1382
1383 Tue Jul 28 11:00:09 1998  Jeffrey A Law  (law@cygnus.com)
1384
1385         * m10300-opc.c: Add entries for "no_match_operands" field in
1386         the opcode table.
1387
1388 Fri Jul 24 11:41:37 1998  Doug Evans  <devans@canuck.cygnus.com>
1389
1390         * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1391
1392 Tue Jul 21 13:41:07 1998  Doug Evans  <devans@seba.cygnus.com>
1393
1394         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1395
1396 Mon Jul 13 14:53:59 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1397
1398         * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1399         the first prefix.
1400         (dofloat): Correct test for fnstsw.  Print `fnstsw %ax' rather
1401         than `fnstsw %eax'.
1402         (OP_J): Remove unnecessary subtraction when 16-bit displacement
1403         will be masked later.
1404
1405 Thu Jul  2 17:11:27 1998  Doug Evans  <devans@seba.cygnus.com>
1406
1407         * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1408
1409 Wed Jul  1 16:11:16 1998  Doug Evans  <devans@seba.cygnus.com>
1410
1411         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1412
1413 Fri Jun 26 11:08:55 1998  Jeffrey A Law  (law@cygnus.com)
1414
1415         * m10300-dis.c: Only recognize instructions from the currently
1416         selected machine.
1417         * m10300-opc.c: Add field indicating the particular variant of
1418         the mn10300 each instruction is available on.
1419
1420 Fri Jun 26 12:04:21 1998  Ian Lance Taylor  <ian@cygnus.com>
1421
1422         * configure.in: For bfd_vax_arch, build vax-dis.lo.
1423         * Makefile.am: Rebuild dependencies.
1424         (CFILES): Add vax-dis.c.
1425         (ALL_MACHINES): Add vax-dis.lo.
1426         * aclocal.m4: Rebuild with current libtool.
1427         * configure, Makefile.in: Rebuild.
1428
1429 Fri Jun 26 12:03:20 1998  Klaus Kaempf  <kkaempf@progis.de>
1430
1431         * vax-dis.c: New file, from work by Pauline Middelink
1432         <middelin@polyware.iaf.nl>.
1433         * disassemble.c (ARCH_vax): Define if ARCH_all.
1434         (disassembler): Add case for ARCH_vax.
1435         * makefile.vms: Support compilation on vms/vax.
1436
1437 Tue Jun 23 19:42:18 1998  Mark Alexander  <marka@cygnus.com>
1438
1439         * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1440         related to sign extension and the size of ints.
1441
1442 Tue Jun 23 10:59:26 1998  Jeffrey A Law  (law@cygnus.com)
1443
1444         * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1445         instructions.  Support (sp) addressing mode by expanding it into
1446         (0,sp).
1447
1448 Sat Jun 20 14:46:20 1998  Frank Ch. Eigler  <fche@cygnus.com>
1449
1450         * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1451
1452 Fri Jun 19 09:16:42 1998  Mark Alexander  <marka@cygnus.com>
1453
1454         * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1455
1456 1998-06-18  Ulrich Drepper  <drepper@cygnus.com>
1457
1458         * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1459         sysexit.
1460
1461 Thu Jun 18 10:22:24 1998  John Metzler  <jmetzler@cygnus.com>
1462
1463         * mips-dis.c (print_insn_little_mips): Previously, instruction
1464         printing references the symbol table to determine whether the
1465         instruction resides in a block regular instructions or mips16
1466         instructions. However, when the disassembler gets used in other
1467         environments where the symbol table is not present, we no longer
1468         rely in the symbol table, rather, use the low bit of the
1469         instructions address to guess. There should be no change for usage
1470         of the disassembler in host based programs, gdb, objdump.
1471         (print_insn_big_mips): ditto.
1472         (print_insn_mips): ditto
1473
1474 Wed Jun 17 21:19:01 1998  Mark Alexander  <marka@cygnus.com>
1475
1476         * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1477
1478 Wed Jun 17 17:49:23 1998  Jeffrey A Law  (law@cygnus.com)
1479
1480         * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1481
1482 Tue Jun 16 13:10:51 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1483
1484         * i386-dis.c (index16): Add '%' to register names.  Use ','
1485         instead of '+'.
1486
1487 Sat Jun 13 11:33:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1488
1489         * i386-dis.c: Don't print opcode suffix when we can figure out the
1490         size (and gas can!) by register operands, or from the default
1491         size.
1492         (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros.  Rename 'C'
1493         macro to 'E'.
1494         (dis386, dis386_twobyte, grps): Use new suffix macros.
1495         (dis386): Correct imul Ib to imul sIb.  Change jnl to jge to be
1496         consistent.  Add suffix for call, jmp, lcall, ljmp, iret.  Reverse
1497         order of cmps operands to agree with Intel docs.  Correct operand
1498         of aad and aam (Ib -> sIb).  Change ud2b from 0fb8 to 0fb9 to
1499         agree with Intel docs.
1500         (print_insn_x86): Print orphan fwait before other prefixes.
1501         Return correct byte count for orphan fwait with prefixes.  Don't
1502         print `bound' operands in reverse order.
1503         (ckprefix): Stop accumulating prefixes if we get fwait.
1504         (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1505
1506 Fri Jun 12 13:40:38 1998  Tom Tromey  <tromey@cygnus.com>
1507
1508         * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1509         ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1510
1511 Fri Jun 12 11:04:06 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1512
1513         Fix problems when bfd_vma is wider than long.
1514         * i386-dis.c: Make op_address and start_pc unsigned.
1515         (set_op): Make parameter unsigned.
1516         (print_insn_x86): Cast to bfd_vma when passing a value to
1517         print_address_func.
1518         * ns32k-dis.c (CORE_ADDR): Don't define.
1519         (print_insn_ns32k): Change type of addr to bfd_vma.  Use
1520         bfd_scan_vma to read back address.
1521         (print_insn_arg): Change type of addr to bfd_vma.  Use sprintf_vma
1522         to format it.
1523         * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1524         (NEXTULONG): New definition.
1525         (print_insn_m68k): Avoid overflow when computing third argument of
1526         print_insn_arg.
1527         (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1528         Use disp instead of val to store offset values.
1529         (print_indexed): Use base_disp instead of word to store base
1530         displacement, to avoid overflow.
1531         * m10300-dis.c (disassemble): Cast value to long when computing
1532         pc-relative address, to get correct sign extension.
1533
1534 Wed Jun 10 15:58:37 1998  Doug Evans  <devans@canuck.cygnus.com>
1535
1536         * m32r-opc.c: Regenerate.
1537
1538 Tue Jun  9 14:27:57 1998  Nick Clifton  <nickc@cygnus.com>
1539
1540         * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1541         'mov rX, rY'.  Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1542
1543 Mon Jun  8 18:17:21 1998  Nick Clifton  <nickc@cygnus.com>
1544
1545         * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1546
1547 Fri Jun  5 23:47:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1548
1549         * i386-dis.c:  Combine aflag and dflag into sizeflag.  Change OP_*
1550         functions to void.
1551         (OP_DSreg): Rename from OP_DSSI.
1552         (OP_ESreg): Rename from OP_ESDI.
1553         (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1554         (DSBX): Define.
1555         (append_seg): Rename from append_prefix.
1556         (ptr_reg): New function.
1557         (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1558         Add DSBX for xlat.
1559         (PREFIX_ADDR): Rename from PREFIX_ADR.
1560         (float_reg): Add non-broken opcodes for people who don't want
1561         UNIXWARE_COMPAT.
1562
1563 Fri Jun  5 19:15:04 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1564
1565         * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1566         68000/68008/68010.
1567
1568 Wed Jun  3 18:56:22 1998  H.J. Lu  <hjl@gnu.org>
1569
1570         * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1571
1572 Tue Jun  2 15:06:46 1998  Geoff Keating  <geoffk@ozemail.com.au>
1573
1574         * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1575         0; produce error message for shifts of size 32 (or 64 for 64-bit
1576         shifts), because the hardware doesn't support them.
1577
1578 Wed May 27 15:29:13 1998  Nick Clifton  <nickc@cygnus.com>
1579
1580         * d30v-opc.c: Add new operand: Ra3.  Change SHORT_B3, SHORT_B3b,
1581         LONG_2, LONG_2b formats to use this new operand.
1582
1583 Tue May 26 20:47:48 1998  Stan Cox  <scox@cygnus.com>
1584
1585         * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1586
1587 Tue May 26 20:45:33 1998  Mark Alexander  <marka@cygnus.com>
1588
1589         * sparc-dis.c (print_insn_sparc): big endian instruction / little
1590         endian data support.
1591
1592 Tue May 26 16:14:39 1998  Nick Clifton  <nickc@cygnus.com>
1593
1594         * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1595         and SHORT_B3b formats to use Rb instead of Ra.
1596
1597         Add FLAG_MUL16 to MUL2XH opcode.
1598
1599         Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1600         to existing 1.1.1 parallelisation prohibition procedure.
1601
1602 Fri May 22 16:00:00 1998  Doug Evans  <devans@canuck.cygnus.com>
1603
1604         * m32r-asm.c,m32r-dis.c: Regenerate.
1605
1606 Tue May 19 17:36:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1607
1608         * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1609         with a shift count of 0.
1610
1611 Fri May 15 14:58:31 1998  Doug Evans  <devans@seba.cygnus.com>
1612
1613         * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1614         (cgen_hw_lookup_by_num): New function.
1615
1616 Wed May 13 17:03:59 1998  Doug Evans  <devans@canuck.cygnus.com>
1617
1618         * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1619
1620 Wed May 13 14:34:31 1998  Mark Alexander  <marka@cygnus.com>
1621
1622         * sparc-dis.c (print_insn_sparc): Always fetch instructions
1623         as big-endian on SPARClite.
1624
1625 Tue May 12 11:46:31 1998  Richard Henderson  <rth@cygnus.com>
1626
1627         * d30v-opc.c (pre_defined_register): Remove alias for r0.
1628
1629 Sun May 10 22:37:22 1998  Jeffrey A Law  (law@cygnus.com)
1630
1631         * po/Make-in (install-info): New target.
1632
1633 Thu May  7 17:15:59 1998  Ian Lance Taylor  <ian@cygnus.com>
1634
1635         * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1636         * configure: Rebuild.
1637
1638 Thu May  7 12:49:46 1998  Frank Ch. Eigler  <fche@cygnus.com>
1639
1640         * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1641         variety of ISA2 instructions to set bottom ten bits of trap code.
1642
1643 Thu May  7 11:54:25 1998  Ian Lance Taylor  <ian@cygnus.com>
1644
1645         * Makefile.am (config.status): Add explicit target so that
1646         config.status depends upon bfd/configure.in.
1647         * Makefile.in: Rebuild.
1648
1649 Thu May  7 09:33:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
1650
1651         * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1652         instructions to set bottom ten bits of break code.
1653         * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1654         for above optional argument.
1655
1656 Wed May  6 15:30:06 1998  Klaus Kaempf  <kkaempf@progis.de>
1657
1658         * makefile.vms: Run dec c with /nodebug.
1659
1660 Mon May  4 10:19:57 1998  Tom Tromey  <tromey@cygnus.com>
1661
1662         * Makefile.in: Rebuilt.
1663         * Makefile.am: Regenerated dependencies with mkdep.
1664
1665         * opintl.h (_): Define as dgettext.
1666
1667 Tue Apr 28 14:12:12 1998  Nick Clifton  <nickc@cygnus.com>
1668
1669         * cgen-asm.c: Internationalised.
1670         * m32r-asm.c: Internationalised.
1671         * m32r-dis.c: Internationalised.
1672         * m32r-opc.c: Internationalised.
1673
1674         * aclocal.m4: Regenerated.
1675         * configure: Regenerated.
1676         * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1677         * Makefile.in: Rebuild.
1678         * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1679         * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1680
1681 Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1682
1683         * configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
1684         after AC_PROG_CC.
1685         * aclocal.m4, configure: Rebuild with current tools.
1686
1687 Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
1688
1689         * opintl.h: New file - contains internationalisation macros used
1690         by source files in this directory.
1691         * po/: New subdirectory - contains internationalisation files.
1692         * po/Make-in: New file - Makefile constructor.
1693         * po/POTFILES.in: New file - list of files in opcodes directory
1694         that should be scan for internationalisation macros.
1695         * po/opcodes.pot: New file - list of internationisation strings
1696         found in files mentioned in po/POTFILES.in.
1697         * Makefile.am: Add rule to build po/POTFILES.in.  Add SUBDIRS
1698         entry.  Add intl directory to include paths.
1699         * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1700         HAVE_STRCPY, HAVE_LC_MESSAGES
1701         * configure.in: Add rule to build Makefile in po subdirectory.
1702         * Makefile.in: Rebuilt.
1703         * aclocal.m4: Rebuilt.
1704         * config.in: Rebuilt.
1705         * configure: Rebuilt.
1706         * alpha-opc.c: Internationalised.
1707         * arc-dis.c: Internationalised.
1708         * arc-opc.c: Internationalised.
1709         * arm-dis.c: Internationalised.
1710         * cgen-asm.c: Internationalised.
1711         * d30v-dis.c: Internationalised.
1712         * dis-buf.c: Internationalised.
1713         * h8300-dis.c: Internationalised.
1714         * h8500-dis.c: Internationalised.
1715         * i386-dis.c: Internationalised.
1716         * m10200-dis.c: Internationalised.
1717         * m10300-dis.c: Internationalised.
1718         * m68k-dis.c: Internationalised.
1719         * m88k-dis.c: Internationalised.
1720         * mips-dis.c: Internationalised.
1721         * ns32k-dis.c: Internationalised.
1722         * opintl.h: Internationalised.
1723         * ppc-opc.c: Internationalised.
1724         * sparc-dis.c: Internationalised.
1725         * v850-dis.c: Internationalised.
1726         * v850-opc.c: Internationalised.
1727
1728 Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>
1729
1730         * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1731         (asm_hash_table_entries): New variable.
1732         (cgen_asm_init): Free asm_hash_table_entries.
1733         (hash_insn_array,hash_insn_list): New functions.
1734         (build_asm_hash_table): Use them.  Hash macro insns as well.
1735         (cgen_asm_lookup_insn): Update.
1736         * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1737         (dis_hash_table_entries): New variable.
1738         (cgen_dis_init): Free dis_hash_table_entries.
1739         (hash_insn_array,hash_insn_list): New functions.
1740         (build_dis_hash_table): Use them.  Hash macro insns as well.
1741         (cgen_dis_lookup_insn): Update.
1742         * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1743         (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1744         (cgen_macro_insn_count): New function.
1745         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1746
1747 Fri Apr 24 16:07:57 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1748
1749         * i386-dis.c (OP_DSSI): Print segment override.
1750
1751 Mon Apr 13 16:59:39 1998  Nick Clifton  <nickc@cygnus.com>
1752
1753         * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1754         operator.
1755
1756 Mon Apr 13 16:50:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1757
1758         * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1759         (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1760         * configure.in: Define and substitute WIN32LDFLAGS and
1761         WIN32LIBADD.
1762         * aclocal.m4: Rebuild with new libtool.
1763         * configure, Makefile.in: Rebuild.
1764
1765 Fri Apr 10 18:14:31 1998  Doug Evans  <devans@canuck.cygnus.com>
1766
1767         * m32r-opc.c: Regenerate.
1768
1769 Sun Apr  5 16:04:39 1998  H.J. Lu  <hjl@gnu.org>
1770
1771         * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1772         before trying to copy it.
1773         * Makefile.in: Rebuild.
1774
1775 Thu Apr  2 17:25:49 1998  Nick Clifton  <nickc@cygnus.com>
1776
1777         * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1778
1779 Wed Apr  1 16:20:27 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
1780
1781         * ns32k-dis.c (bit_extract_simple): New function to extract bits
1782         from an arbitrary valid buffer instead of fetching them on demand
1783         using fetch_data().
1784         (invalid_float): use bit_extract_simple() instead of bit_extract().
1785
1786 Tue Mar 31 11:09:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1787
1788         From H.J. Lu <hjl@gnu.org>:
1789         * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1790         to Ev for both.
1791
1792 Mon Mar 30 17:32:03 1998  Ian Lance Taylor  <ian@cygnus.com>
1793
1794         * Branched binutils 2.9.
1795
1796 Mon Mar 30 15:18:00 1998  Ken Raeburn  <raeburn@cygnus.com>
1797
1798         * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1799         disassembling last 4 bytes of a section.
1800
1801 Fri Mar 27 18:08:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1802
1803         Fix some gcc -Wall warnings:
1804         * arc-dis.c (print_insn): Add casts to avoid warnings.
1805         * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1806         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1807         * m10200-dis.c (disassemble): Likewise.
1808         * m10300-dis.c (disassemble): Likewise.
1809         * ns32k-dis.c (print_insn_ns32k): Likewise.
1810         * ppc-opc.c (insert_ral, insert_ram): Likewise.
1811         * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1812         * cgen-opc.c (cgen_keyword_search_next): Likewise.
1813         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1814         * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1815         * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1816         * tic80-dis.c (print_one_instruction): Likewise.
1817         * w65-dis.c (print_operand): Likewise.
1818         * z8k-dis.c (fetch_data): Likewise.
1819         * a29k-dis.c: Add return type for find_byte_func_type.
1820         * arc-opc.c: Include <stdio.h>.  Remove declarations of
1821         insert_multshift and extract_multshift.
1822         * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1823         conditionals.
1824         (extract_value): Fully parenthesize expression.
1825         * h8500-dis.c (print_insn_h8500): Initialize local variables.
1826         * h8500-opc.h (h8500_table): Fully bracket initializer.
1827         * w65-opc.h (optable): Likewise.
1828         * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1829         * i386-dis.c (OP_E): Initialize local variables.
1830         * m10200-dis.c (print_insn_mn10200): Likewise.
1831         * mips-dis.c (print_insn_mips16): Likewise.
1832         * sh-dis.c (print_insn_shx): Likewise.
1833         * v850-dis.c (print_insn_v850): Likewise.
1834         * ns32k-dis.c (print_insn_arg): Declare.
1835         (get_displacement, invalid_float): Declare.
1836         (list_search, sign_extend, flip_bytes): Declare return type.
1837         (get_displacement): Likewise.
1838         (print_insn_arg): Likewise.  Make d int.  Fix sprintf format
1839         string.
1840         (print_insn_ns32k): Make i unsigned.
1841         (invalid_float): Make static.  Declare type of val.
1842         * tic30-dis.c (print_par_insn): Make i size_t.  Don't check strlen
1843         on each for iteration.
1844         * tic30-dis.c (get_indirect_operand): Likewise.
1845         * z8k-dis.c (print_insn_z8001): Declare return type.
1846         (print_insn_z8002): Likewise.
1847         (unparse_instr): Fix sprintf format strings.
1848
1849 Fri Mar 27 00:05:23 1998  Jeffrey A Law  (law@cygnus.com)
1850
1851         * mips-opc.c: Add "sync.l" and "sync.p".
1852
1853 Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1854
1855         * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1856         default m68k variant to recognize.
1857
1858         * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1859         (ctrl, cobr, mem, ea): Likewise.
1860         (print_addr): Likewise.  Remove cast.
1861         (ea): Cast argument of print_addr to bfd_vma.
1862
1863         * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1864         variable value.
1865         (cgen_parse_unsigned_integer): Likewise.
1866         (cgen_parse_address): Likewise.
1867
1868 Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>
1869
1870         * i960-dis.c (ctrl): Add full braces to structure initialization.
1871         (cobr, mem, reg): Likewise.
1872         (ea): Correct parenthesization in expression.
1873
1874         * cgen-asm.c: Include <ctype.h>.
1875         (build_asm_hash_table): Remove unused local variable i.
1876         (cgen_parse_keyword): Add casts to avoid warnings.
1877
1878         * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1879         symbol.  Fix indentation.
1880         (print_insn_little_arm): Likewise.
1881
1882 Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>
1883
1884         * configure.in: Use AM_DISABLE_SHARED.
1885         * aclocal.m4, configure: Rebuild with libtool 1.2.
1886
1887 Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>
1888
1889         These patches are courtesy of Jonathan Walton and Tony Thompson
1890         (athompso@cambridge.arm.com).
1891
1892         * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1893         relative addresses.
1894
1895         * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1896         both the offset and the label closest to the destination.
1897
1898 Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>
1899
1900         * m32r-opc.h: Regenerate.
1901
1902 Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>
1903
1904         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1905
1906 Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>
1907
1908         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1909         assume that info->symbols is non-empty.
1910
1911 Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>
1912
1913         * alpha-opc.c (cvtqs) There is no such thing.
1914         (cvttq): Missing most of the /*d variants.
1915
1916 Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>
1917
1918         * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1919         delayed branches or jumps.
1920
1921 Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>
1922
1923         * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1924         to *info->symbols.
1925         * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1926         * tic30-dis.c (print_branch): Likewise.
1927
1928 Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>
1929
1930         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1931         saved_symbol code as it is no longer needed.
1932
1933 Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>
1934
1935         * cgen-asm.c: Include symcat.h.
1936         * cgen-dis.c,cgen-opc.c: Ditto.
1937         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1938
1939 Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)
1940
1941         * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1942
1943 Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>
1944
1945         * m32r-opc.[ch]: Regenerate.
1946
1947 Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>
1948
1949         * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1950         arguments.  Don't perform validation here.
1951         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1952
1953 Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>
1954
1955         * m32r-opc.c: Regenerate.
1956
1957 Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>
1958
1959         * Makefile.am (AUTOMAKE_OPTIONS): Define.
1960         * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1961
1962 Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>
1963
1964         * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1965
1966 Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>
1967
1968         * configure.in: Get the version number from BFD.
1969         * configure: Rebuild.
1970
1971         From H.J. Lu <hjl@gnu.org>:
1972         * Makefile.am (libopcodes_la_LDFLAGS): Define.
1973         * Makefile.in: Rebuild.
1974
1975 Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>
1976
1977         * m32r-opc.c: Regenerate.
1978         * m32r-opc.h: Regenerate.
1979
1980 Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>
1981
1982         * m32r-opc.c: Regenerate.
1983
1984 Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>
1985
1986         Fix rac to accept only a0:
1987         * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1988         Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1989         Introduce OPERAND_GPR.
1990         * d10v-dis.c (print_operand): Likewise.
1991
1992 Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>
1993
1994         * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1995         (cgen_hw_lookup): Make result const.
1996         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1997
1998 Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1999
2000         * configure, aclocal.m4: Rebuild with new libtool.
2001
2002 Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>
2003
2004         * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
2005         instructions use a PC relative branch, not absolute.
2006
2007 Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>
2008
2009         * configure.in: Set libtool_enable_shared rather than
2010         libtool_shared.  Remove diversion hack.
2011         * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
2012
2013 Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>
2014
2015         * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
2016         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2017
2018 Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>
2019
2020         * tic30-dis.c: New file.
2021         * disassemble.c (disassembler): Add bfd_arch_tic30 case.
2022         * configure.in: Handle bfd_tic30_arch.
2023         * Makefile.am: Rebuild dependencies.
2024         (CFILES): Add tic30-dis.c
2025         (ALL_MACHINES): Add tic30-dis.lo.
2026         * configure, Makefile.in: Rebuild.
2027
2028 Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>
2029
2030         * m32r-opc.h (HAVE_CPU_M32R): Define.
2031
2032 Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>
2033
2034         * v850-opc.c (insertion routines): If both alignment and size is
2035         wrong then report this.
2036
2037 Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)
2038
2039         * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
2040         Only recognize instructions for the current target_processor.
2041
2042 Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>
2043
2044         * d10v-dis.c (PC_MASK): Correct value.
2045         (print_operand): If there's a reloc, don't calculate the
2046         address because they could be in different sections.
2047
2048 Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>
2049
2050         * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
2051         instruction after the 4650's "mul" instruction; nobody's using the
2052         4010 these days.  If object files someday indicate which processor
2053         variant they're intended for, we can do a better job at this.
2054
2055 Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>
2056
2057         * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
2058         table provided entry size.  Use CGEN_INSN_MNEMONIC.
2059         (cgen_parse_keyword): Rewrite.
2060         * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
2061         table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
2062         * cgen-opc.c: Clean up pass over `struct foo' usage.
2063         (cgen_keyword_lookup_value): Handle "" entry.
2064         (cgen_keyword_add): Likewise.
2065
2066 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
2067
2068         * mips-opc.c: Add FP_D to s.d instruction flags.
2069
2070 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2071
2072         * m68k-opc.c (halt, pulse): Enable them on the 68060.
2073
2074 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
2075
2076         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
2077         PC relative offset forms before the 15 bit forms.  An assembler command
2078         line option now chooses the default.
2079
2080 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
2081
2082         * d30v-opc.c (d30v_opcode_table): Set new flags bits
2083         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
2084
2085 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
2086
2087         * configure: Only build libopcodes shared if --enable-shared's value
2088         was `yes', or was set to `*opcodes*'.
2089         * aclocal.m4: Likewise.
2090         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
2091         original source of this bit of code.  It's not clear what the best fix
2092         would be, though.
2093
2094 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
2095
2096         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
2097         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
2098         offset forms before the 15 bit forms, to default to the long forms.
2099
2100 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
2101
2102         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
2103
2104 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
2105
2106         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
2107         symbol if none is present.
2108         (print_insn_big_arm):  Prevent examination of stored symbol if
2109         none is present.
2110
2111 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
2112
2113         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
2114
2115 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
2116
2117         * disassemble.c: Remove disasm_symaddr() function.
2118
2119         * arm-dis.c: Use info->symbol instead of info->flags to determine
2120         if disassmbly should be in Thumb or Arm mode.
2121
2122 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
2123
2124         * arm-dis.c: Add support for disassembling Thumb opcodes.
2125         (print_insn_thumb): New function.
2126
2127         * disassemble.c (disasm_symaddr): New function.
2128
2129         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
2130         (thumb_opcodes): Table of Thumb opcodes.
2131
2132 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2133
2134         * m68k-opc.c (btst): Change Dd@s to Dd;b.
2135
2136         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
2137         and 'v' as operand types.
2138
2139 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
2140
2141         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
2142         <olivier.carmona@di.epfl.ch>.
2143         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
2144         which has a two word opcode with a one word argument.
2145
2146 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
2147
2148         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
2149         unsigned, not signed.
2150         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
2151
2152 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
2153
2154         * d10v-dis.c (print_operand):
2155         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
2156
2157 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
2158
2159         * d10v-opc.c (OPERAND_FLAG): Split into:
2160         (OPERAND_FFLAG, OPERAND_CFLAG) .
2161         (FSRC): Split into:
2162         (FFSRC, CFSRC).
2163
2164 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
2165
2166         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
2167         field for all INSN_MACRO's.
2168         * mips16-opc.c: same
2169
2170 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
2171
2172         * mips-opc.c (sync,cache): These are 3900 insns.
2173
2174 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
2175
2176         sh-opc.h (sh_table): Remove ftst/nan.
2177
2178 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
2179
2180         * mips-opc.c (ffc, ffs): Fix mask.
2181
2182 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
2183
2184         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2185         control registers.
2186
2187 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
2188
2189         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2190         (WR_HILO, RD_HILO, MOD_HILO): New macros.
2191
2192 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
2193
2194         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2195         (WR_HILO, RD_HILO, MOD_HILO): New macros.
2196
2197 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
2198
2199         * v850-dis.c (disassemble): Replace // with /* ... */
2200
2201 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
2202
2203         * sparc-opc.c: Add wr & rd for v9a asr's.
2204         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2205         (v9a_asr_reg_names): New variable.
2206         Patch from David Miller <davem@vger.rutgers.edu>.
2207
2208 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
2209
2210         * sparc-opc.c (v9notv9a): New insn type.
2211         (IMPDEP): Move to the end to not conflict with edge8 et al.
2212         Patch from David Miller <davem@vger.rutgers.edu>.
2213
2214 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
2215
2216         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2217
2218 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
2219
2220         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2221
2222 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
2223
2224         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2225         of disassemble_info structure to determine if an overlay address
2226         has a matching symbol in low memory.
2227
2228         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2229         new symbol_at_address_func field in disassemble_info structure.
2230
2231 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
2232
2233         * v850-opc.c (extract_d22): Use signed arithmatic.
2234
2235 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
2236
2237         * mips-opc.c: Three op mult is not an ISA insn.
2238
2239 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
2240
2241         * mips-opc.c: Fix formatting.
2242
2243 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
2244
2245         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2246         than assuming that char is signed.  Explicitly sign extend 16 bit
2247         values, rather than assuming that short is 16 bits.
2248         (OP_sI, OP_J, OP_DIR): Likewise.
2249
2250 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
2251
2252         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2253         system registers.
2254
2255 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
2256
2257         * v850-opc.c: Fix typo in comment.
2258
2259         * v850-dis.c (disassemble): Add test of processor type when
2260         determining opcodes.
2261
2262 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
2263
2264         * configure.in: Use a diversion to set enable_shared before the
2265         arguments are parsed.
2266         * configure: Rebuild.
2267
2268 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
2269
2270         * m68k-opc.c (TBL1): Use ! rather than `.
2271         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2272
2273 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
2274
2275         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2276
2277         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2278
2279         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2280         for mcf5200.
2281
2282         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2283         * aclocal.m4: Rebuild with new libtool.
2284         * configure: Rebuild.
2285
2286 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
2287
2288         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2289
2290 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
2291
2292         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2293
2294 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
2295
2296         * v850-opc.c (v850_opcodes): Further rearrangements.
2297
2298 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
2299
2300         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2301
2302 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
2303
2304         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2305         parser to work.
2306
2307 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
2308
2309         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2310
2311 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
2312
2313         * v850-opc.c: Initialise processors field of v850_opcode structure.
2314
2315 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
2316
2317         Merge changes from Martin Hunt:
2318
2319         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2320
2321         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2322         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2323         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2324
2325         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2326
2327         * d30v-dis.c (print_insn): First operand of d*i (delayed
2328         branch) instructions is relative.
2329
2330         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2331         (d30v_operand_table): Add IMM6S3 type.
2332         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2333
2334         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2335         and cmp instructions.
2336
2337         * d30v-opc.c: Correct entries for repeat*, and sat*.
2338         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2339         types. Correct several formats.
2340
2341         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2342
2343         * d30v-opc.c (pre_defined_registers): Change control registers.
2344
2345         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2346         SHORT_C2.  Manual was incorrect.
2347
2348         * d30v-dis.c (lookup_opcode):  Return value now indicates
2349         if an opcode has a short and a long form.  Used for deciding
2350         to append a ".s" or ".l".
2351         (print_insn): Append a ".s" to an instruction if it is
2352         the short form and ".l" if it is a long form. Do not append
2353         anything if the instruction has only one possible size.
2354
2355         * d30v-opc.c: Change mulx2h to require an even register.
2356         New form: SHORT_A2; a SHORT_A form that needs an even
2357         register as the first operand.
2358
2359         * d30v-dis.c (print_insn_d30v): Fix problem where the last
2360         instruction was not being disassembled if there were an odd
2361         number of instructions.
2362
2363         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
2364
2365 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
2366
2367         * v850-dis.c (disassemble): Improved display of register lists.
2368
2369 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
2370
2371         * sparc-opc.c (sparc_opcodes): Fix assembler args to
2372         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2373         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2374         fandnot1s, fandnot2s.
2375
2376 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
2377
2378         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2379
2380 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
2381
2382         * cgen-asm.c (cgen_parse_address): New argument resultp.
2383         All callers updated.
2384         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2385
2386 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
2387
2388         * mn10200-dis.c (disassemble): PC relative instructions are
2389         relative to the next instruction, not the current instruction.
2390
2391 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
2392
2393         * v850-dis.c (disassemble): Only signed extend values that are not
2394         returned by extract functions.
2395         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2396
2397 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
2398
2399         * v850-opc.c: Update comments.  Remove use of
2400         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
2401
2402 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
2403
2404         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2405
2406 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
2407
2408         * configure: Rebuilt with latest devo autoconf for NT support.
2409
2410 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
2411
2412         * v850-dis.c (disassemble): Use curly brace syntax for register
2413         lists.
2414
2415         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2416         where r0 is being used as a destination register.
2417
2418 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
2419
2420         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2421
2422 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
2423
2424         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2425
2426 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
2427
2428         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2429         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2430         opcodes..
2431
2432 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
2433
2434         * configure (cgen_files): Add support for v850e target.
2435         * configure.in (cgen_files):  Add support for v850e target.
2436
2437 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
2438
2439         * configure (cgen_files): Add support for v850ea target.
2440         * configure.in (cgen_files):  Add support for v850ea target.
2441
2442 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
2443
2444         * configure.in (bfd_arc_arch): Add.
2445         * configure: Rebuild.
2446         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2447         * Makefile.in: Rebuild.
2448         * arc-dis.c, arc-opc.c: New files.
2449         * disassemble.c (ARCH_all): Define ARCH_arc.
2450         (disassembler): Add ARC support.
2451
2452 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
2453
2454         * v850-dis.c (disassemble): Add support for v850EA instructions.
2455
2456         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2457         (v850_opcodes): Add v850EA instructions.
2458
2459         * v850-dis.c (disassemble): Add support for v850E instructions.
2460
2461         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2462         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2463         insert_spe, extract_spe): New Functions.
2464         (v850_opcodes): Add v850E instructions.
2465
2466         * v850-opc.c: Reorganised and re-layed out to improve readability
2467         and portability.
2468
2469 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
2470
2471         * configure: Rebuild with autoconf 2.12.1.
2472
2473 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2474
2475         * aclocal.m4, configure: Rebuild with new automake patches.
2476
2477 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
2478
2479         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2480         * acinclude.m4: Just include acinclude.m4 from BFD.
2481         * aclocal.m4, configure: Rebuild.
2482
2483 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
2484
2485         * Makefile.am: New file, based on old Makefile.in.
2486         * acconfig.h: New file.
2487         * acinclude.m4: New file.
2488         * stamp-h.in: New file.
2489         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2490         Removed shared library handling; now handled by libtool.  Replace
2491         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
2492         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
2493         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
2494         handling in AC_OUTPUT.
2495         * dep-in.sed: Change .o to .lo.
2496         * Makefile.in: Now built with automake.
2497         * aclocal.m4: Now built with aclocal.
2498         * config.in, configure: Rebuild.
2499
2500 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
2501
2502         * mips-opc.c: Fix typo/thinko in "eret" instruction.
2503
2504 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
2505
2506         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2507         Make array const.
2508         * sparc-dis.c (sorted_opcodes): New static local.
2509         (struct opcode_hash): `opcode' is pointer to const element.
2510         (build_hash): First arg is now table of sorted pointers.
2511         (print_insn_sparc): Sort opcodes by sorting table of pointers.
2512         (compare_opcodes): Update.
2513
2514 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
2515
2516         * cgen-opc.c: #include <ctype.h>.
2517         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
2518         Handle case insensitive hashing.
2519         (hash_keyword_value): Change type of `value' to unsigned int.
2520
2521 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
2522
2523         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2524         precision FP, mark it as such.  Likewise for double precision
2525         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
2526         possible.
2527
2528 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
2529
2530         * ppc-opc.c (extract_nsi): make unsigned expression signed before
2531         negating it.
2532         (UNUSED): remove one level of parens, so MSVC doesn't choke on
2533         nesting depth when all the macros are expanded.
2534
2535 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
2536
2537         * sparc-opc.c: The fcmp v9a instructions take an integer register
2538         as a destination, not a floating point register.  From Christian
2539         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2540
2541 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
2542
2543         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2544         syntax.  From Roman Hodek
2545         <rnhodek@faui22c.informatik.uni-erlangen.de>.
2546
2547         * i386-dis.c (twobyte_has_modrm): Fix pand.
2548
2549 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
2550
2551         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2552
2553 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
2554
2555         * arm-dis.c: Add prototypes for arm_decode_shift and
2556         print_insn_arm.
2557
2558 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
2559
2560         * mips-opc.c: Add r3900 insns.
2561
2562 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2563
2564         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
2565         print delay slot instructions on the same line.  When using a PC
2566         relative load, add a comment with the value being loaded if it can
2567         be obtained.
2568
2569 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
2570
2571         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2572         to pushS/popS for segment regs and byte constant so that
2573         pushw/popw printed when in 16 bit data mode.
2574
2575         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2576         print cbtw, cwtd in 16 bit data mode.
2577         * i386-dis.c (putop): extra case W to support above.
2578
2579         * i386-dis.c (print_insn_x86): print addr32 prefix when given
2580         address size prefix in 16 bit address mode.
2581
2582 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
2583
2584         * sh-dis.c: Reindent.  Rename local variable fprintf to
2585         fprintf_fn.
2586
2587 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
2588
2589         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2590
2591 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
2592
2593         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2594           field membership.
2595         * mips16-opc.c (mip16_opcodes): same.
2596
2597 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
2598
2599         * m68k-opc.c (moveb): Change $d to %d.
2600
2601 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
2602
2603         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2604         (twobyte_has_modrm): Likewise.
2605         (grps): Likewise.
2606         (OP_MMX, OP_EM, OP_MS): New static functions.
2607
2608         * i386-dis.c: Revert patch of April 4.  The output now matches
2609         what gcc generates.
2610
2611 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
2612
2613         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2614         of $simm16.
2615
2616 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
2617
2618         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2619
2620 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
2621
2622         * Makefile.in (install): Depend upon installdirs.
2623         (installdirs): New target.
2624
2625 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
2626
2627         From Thomas Graichen <graichen@rzpd.de>:
2628         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2629         * configure: Rebuild.
2630
2631 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
2632
2633         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2634         Delete string{,s}.h support.
2635
2636 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
2637
2638         * cgen-asm.c (cgen_parse_operand_fn): New global.
2639         (cgen_parse_{{,un}signed_integer,address}): Update call to
2640         cgen_parse_operand_fn.
2641         (cgen_init_parse_operand): New function.
2642         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2643         from cgen_asm_init_parse.
2644         (m32r_cgen_assemble_insn): New operand `errmsg'.
2645         Delete call to as_bad, return error message to caller.
2646         (m32r_cgen_asm_hash_keywords): #if 0 out.
2647
2648 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2649
2650         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2651         not data register.
2652         [case 'J']: Fix typo in register name.
2653
2654 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
2655
2656         * configure.in: Substitute SHLIB_LIBS.
2657         * configure: Rebuild.
2658         * Makefile.in (SHLIB_LIBS): New variable.
2659         ($(SHLIB)): Use $(SHLIB_LIBS).
2660
2661 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
2662
2663         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2664
2665         * cgen-opc.c (hash_keyword_name): Improve algorithm.
2666
2667         * disassemble.c (disassembler): Handle m32r.
2668
2669 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
2670
2671         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2672         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2673         * Makefile.in (CFILES): Add them.
2674         (ALL_MACHINES): Add them.
2675         (dependencies): Regenerate.
2676         * configure.in (cgen_files): New variable.
2677         (bfd_m32r_arch): Add entry.
2678         * configure: Regenerate.
2679
2680 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2681
2682         * configure.in: Correct file names for bfd_mn10[23]00_arch.
2683         * configure: Rebuild.
2684
2685         * Makefile.in: Rebuild dependencies.
2686
2687         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2688
2689         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
2690         fdivp.
2691
2692 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
2693
2694         * Branched binutils 2.8.
2695
2696 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
2697
2698         * m10200-dis.c: Rename from mn10200-dis.c.
2699         * m10200-opc.c: Rename from mn10200-opc.c.
2700         * m10300-dis.c: Rename from mn10300-dis.c
2701         * m10300-opc.c: Rename from mn10300-opc.c.
2702         * Makefile.in: Update accordingly.
2703
2704         * mips16-opc.c: Add mul and dmul macros.
2705
2706 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
2707
2708         * makefile.vms: Update CFLAGS, add clean target.
2709
2710 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
2711
2712         * mips-opc.c: Add "wait".  From Ralf Baechle
2713         <ralf@gnu.ai.mit.edu>.
2714
2715         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2716         * configure, config.in: Rebuild.
2717         * sysdep.h: Include <stdlib.h> if it exists.
2718         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
2719         <string.h>.
2720         * Makefile.in: Rebuild dependencies.
2721
2722 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2723
2724         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
2725         Andrew Bray <andy@madhouse.demon.co.uk>.
2726
2727         * mips-opc.c: Add cast when setting mips_opcodes.
2728
2729 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
2730
2731         * v850-dis.c (disassemble):  Fix sign extension problem.
2732         * v850-opc.c (extract_d*):  Fix sign extension problems to make
2733         disassembly calculate branch offsets correctly.
2734
2735 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
2736
2737         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2738
2739         * mips-opc.c: Add dctr and dctw.
2740
2741 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2742
2743         * d30v-dis.c (print_insn): Change the way signed constants
2744         are displayed.
2745
2746 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2747
2748         * Makefile.in (BFD_H): New variable.
2749         (HFILES): New variable.
2750         (CFILES): Add all C files.
2751         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2752         Delete old dependencies, and build new ones.
2753         * dep-in.sed: New file.
2754
2755 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2756
2757         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2758
2759 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
2760
2761         * mn10200-opc.c: Change "trap" to "syscall".
2762         * mn10300-opc.c: Add new "syscall" instruction.
2763
2764 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2765
2766         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2767         mulul insns on the coldfire.
2768
2769 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
2770
2771         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2772         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2773         (print_insn_little_arm): Likewise.
2774
2775 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
2776
2777         Based on patches from H.J. Lu <hjl@lucon.org>:
2778         * i386-dis.c (fetch_data): Add prototype.
2779         * m68k-dis.c (fetch_data): Add prototype.
2780         (dummy_print_address): Add prototype.  Make static.
2781         * ppc-opc.c (valid_bo): Add prototype.
2782         * sparc-dis.c (build_hash_table): Add prototype.
2783         (is_delayed_branch, compute_arch_mask): Add prototypes.
2784         (print_insn_sparc): Make several local variables const.
2785         (compare_opcodes): Change arguments to const PTR.  Add prototype.
2786         * sparc-opc.c (arg): Change name field to be const.
2787         (lookup_name, lookup_value): Add prototypes.  Change table and
2788         name parameters to be const.
2789         (sparc_encode_asi): Change name parameter to be const.
2790         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2791         (sparc_encode_sparclet_cpreg): Likewise.
2792         (sparc_decode_asi): Change return type to be const.
2793         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2794         (sparc_decode_sparclet_cpreg): Likewise.
2795
2796 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
2797
2798         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2799         Solaris doesn't like the combined options, and the -f is
2800         unnecessary.
2801         (stamp-tshlink, install): Likewise.
2802
2803 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
2804
2805         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2806         as relaxable.
2807
2808 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
2809
2810         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2811
2812 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
2813
2814         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2815         the mc68000.
2816
2817 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2818
2819         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2820
2821 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
2822
2823         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2824
2825 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
2826
2827         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2828
2829 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2830
2831         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2832         floatformat_to_double to make portable.
2833         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2834         precision float.
2835
2836 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
2837
2838         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2839         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2840
2841 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2842
2843         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2844         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2845
2846 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
2847
2848         * tic80-opc.c (LSI_SCALED): Renamed from this ...
2849         (OFF_SL_BR_SCALED): ... to this, and added the flag
2850         TIC80_OPERAND_BASEREL to the flags word.
2851         (tic80_opcodes): Replace all occurances of LSI_SCALED with
2852         OFF_SL_BR_SCALED.
2853
2854 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
2855
2856         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2857         Change mips_opcodes from const array to a pointer,
2858         and change bfd_mips_num_opcodes from const int to int,
2859         so that we can increase the size of the mips opcodes table
2860         dynamically.
2861
2862 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
2863
2864         * tic80-opc.c (tic80_predefined_symbols): Revert change to
2865         store BITNUM values in the table in one's complement form
2866         to match behavior when assembler is given a raw numeric
2867         value for a BITNUM operand.
2868         * tic80-dis.c (print_operand_bitnum): Ditto.
2869
2870 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2871
2872         * d30v-opc.c: Removed references to FLAG_X.
2873
2874 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
2875
2876         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2877
2878 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2879
2880         * Makefile.in: Added d30v object files.
2881         * configure: (bfd_d30v_arch) Rebuilt.
2882         * configure.in: (bfd_d30v_arch) Added new case.
2883         * d30v-dis.c: New file.
2884         * d30v-opc.c: New file.
2885         * disassemble.c (disassembler) Add entry for d30v.
2886
2887 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
2888
2889         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2890         representations for the floating point BITNUM values.
2891
2892 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
2893
2894         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2895         in the table in one's complement form, as they appear in the
2896         actual instruction.
2897         (tic80_symbol_to_value): Use macros to access predefined
2898         symbol fields.
2899         (tic80_value_to_symbol): Ditto.
2900         (tic80_next_predefined_symbol): New function.
2901         * tic80-dis.c (print_operand_bitnum): Remove code that did
2902         one's complement for BITNUM values.
2903
2904 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
2905
2906         * makefile.vms: Remove 8 bit characters.  Update to latest
2907         gcc release.
2908
2909 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2910
2911         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2912
2913 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
2914
2915         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2916         (IMM24_PCREL): Likewise.
2917
2918 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2919
2920         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2921         address for an extended PC relative instruction that is not a
2922         branch.
2923
2924 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2925
2926         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2927         bytes_per_line.
2928
2929 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
2930
2931         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2932         (tic80_opcodes): Sort entries so that long immediate forms
2933         come after short immediate forms, making it easier for
2934         assembler to select the right one for a given operand.
2935
2936 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
2937
2938         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2939         display_endian.
2940         (print_insn_mips16): Likewise.
2941
2942 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
2943
2944         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2945         a symbol class that restricts translation to just that
2946         class (general register, condition code, etc).
2947
2948 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
2949
2950         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2951         and REG_DEST_E for register operands that have to be
2952         an even numbered register.  Add REG_FPA for operands that
2953         are one of the floating point accumulator registers.
2954         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2955         (tic80_opcodes): Change entries that need even numbered
2956         register operands to use the new operand table entries.
2957         Add "or" entries that are identical to "or.tt" entries.
2958
2959 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2960
2961         * mips16-opc.c: Add new cases of exit instruction for
2962         disassembler.
2963         * mips-dis.c (print_mips16_insn_arg): Display floating point
2964         registers in operands of exit instruction.  Print `$' before
2965         register names in operands of entry and exit instructions.
2966
2967 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
2968
2969         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2970         pairs for all predefined symbols recognized by the assembler.
2971         Also used by the disassembling routines.
2972         (tic80_symbol_to_value): New function.
2973         (tic80_value_to_symbol): New function.
2974         * tic80-dis.c (print_operand_control_register,
2975         print_operand_condition_code, print_operand_bitnum):
2976         Remove private tables and use tic80_value_to_symbol function.
2977
2978 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2979
2980         * d10v-dis.c (print_operand): Change address printing
2981         to correctly handle PC wrapping.  Fixes PR11490.
2982
2983 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
2984
2985         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2986         branches relaxable.
2987
2988 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
2989
2990         * mips-dis.c (print_insn_mips16): Set insn_info information.
2991         (print_mips16_insn_arg): Likewise.
2992
2993         * mips-dis.c (print_insn_mips16): Better handling of an extend
2994         opcode followed by an instruction which can not be extended.
2995
2996 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
2997
2998         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2999         coldfire moveb instruction to not allow an address register as
3000         destination.  Although the documentation does not indicate that
3001         this is invalid, experiments uncovered unexpected behavior.
3002         Added a comment explaining the situation.  Thanks to Andreas
3003         Schwab for pointing this out to me.
3004
3005 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
3006
3007         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
3008         entries are presorted so that entries with the same mnemonic are
3009         adjacent to each other in the table.  Sort the entries for each
3010         instruction so that this is true.
3011
3012 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3013
3014         * m68k-dis.c: Include <libiberty.h>.
3015         (print_insn_m68k): Sort the opcode table on the most significant
3016         nibble of the opcode.
3017
3018 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
3019
3020         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
3021         "vsub", "vst", "xnor", and "xor" instructions.
3022         (V_a1): Renamed from V_a, msb of accumulator reg number.
3023         (V_a0): Add macro, lsb of accumulator reg number.
3024
3025 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
3026
3027         * tic80-dis.c (print_insn_tic80): Broke excessively long
3028         function up into several smaller ones and arranged for
3029         the instruction printing function to be callable recursively
3030         to print vector instructions that have both a load and a
3031         math instruction packed into a single opcode.
3032         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
3033         to explain why it comes after the other vector opcodes.
3034
3035 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
3036
3037         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
3038         move insns to handle immediate operands.
3039
3040 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3041
3042         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
3043         fix operand mask in the "moveml" entries for the coldfire.
3044
3045 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
3046
3047         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
3048         New macros for building vector instruction opcodes.
3049         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
3050         FMT_LI, which were unused.  The field is now a flags field.
3051         Remove some opcodes that are possible, but illegal, such
3052         as long immediate instructions with doubles for immediate
3053         values.  Add "vadd" and "vld" instructions.
3054
3055 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
3056
3057         * tic80-opc.c (tic80_operands): Reorder some table entries to make
3058         the order more logical.  Move the shift alias instructions ("rotl",
3059         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
3060         interspersed with the regular sr.x and sl.x instructions.  Add
3061         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
3062         "sub", "subu", "swcr", and "trap".
3063
3064 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
3065
3066         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
3067         (OFF_SL_PC): Renamed from OFF_SL.
3068         (OFF_SS_BR): New operand type for base relative operand.
3069         (OFF_SL_BR): New operand type for base relative operand.
3070         (REG_BASE): New operand type for base register operand.
3071         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
3072         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
3073         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
3074         instructions.
3075         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3076         10 char field, padded with spaces on rhs, rather than a string
3077         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
3078         than old TIC80_OPERAND_RELATIVE.  Add support for new
3079         TIC80_OPERAND_BASEREL flag bit.
3080
3081 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
3082
3083         * tic80-dis.c (print_insn_tic80): Print floating point operands
3084         as floats.
3085         * tic80-opc.c (SPFI): Add single precision floating point
3086         immediate operand type.
3087         (ROTATE): Add rotate operand type for shifts.
3088         (ENDMASK): Add for shifts.
3089         (n): Macro for the 'n' bit.
3090         (i): Macro for the 'i' bit.
3091         (PD): Macro for the 'PD' field.
3092         (P2): Macro for the 'P2' field.
3093         (P1): Macro for the 'P1' field.
3094         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3095         "fcmp", and "fdiv".
3096
3097 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
3098
3099         * mn10200-dis.c (disassemble): Mask off unwanted bits after
3100         adding in current address for pc-relative operands.
3101
3102 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
3103
3104         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3105         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3106         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3107         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3108         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3109         REG_BASE_M_SI, REG_BASE_M_LI respectively.
3110         (REG_SCALED, LSI_SCALED): New operand types.
3111         (E): New macro for 'E' bit at bit 27.
3112         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3113         opcodes, including the various size flavors (b,h,w,d) for
3114         the direct load and store instructions.
3115
3116 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
3117
3118         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3119         in an instruction.
3120         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3121         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3122         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3123         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3124         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3125         masks with "MASK_* & ~M_*" to get the M bit reset.
3126         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3127
3128 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
3129
3130         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3131         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
3132         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3133         form.
3134         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3135         CC, SICR, and LICR table entries.
3136         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3137         "bcnd", and "brcr" opcodes.
3138
3139 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
3140
3141         * ppc-opc.c (powerpc_operands): Make comment match the
3142         actual fields (no shift field).
3143         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3144         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3145         partial implementation, work in progress.
3146         * tic80-opc.c (tic80_operands): Begin construction operands table.
3147         (tic80_opcodes): Continue populating opcodes table and start
3148         filling in the operand indices.
3149         (tic80_num_opcodes): Add this.
3150
3151 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
3152
3153         * m68k-opc.c: Add #B case for moveq.
3154
3155 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
3156
3157         * mn10300-dis.c (disassemble): Make sure all variables are initialized
3158         before they are used.
3159
3160 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
3161
3162         * v850-opc.c (v850_opcodes): Put curly-braces around operands
3163         for "breakpoint" instruction.
3164
3165 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
3166
3167         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3168         (dep): Use ALL_CFLAGS rather than CFLAGS.
3169
3170 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3171
3172         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3173         flag.
3174
3175 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
3176
3177         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3178         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3179
3180 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3181
3182         * mips16-opc.c: Add "abs".
3183
3184 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
3185
3186         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3187         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3188         (disassembler): Add bfd_arch_tic80 support to set disassemble
3189         to print_insn_tic80.
3190         * tic80-dis.c (print_insn_tic80): Add stub.
3191
3192 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
3193
3194         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3195         * configure: Regenerate with autoconf.
3196         * tic80-dis.c: Add file.
3197         * tic80-opc.c: Add file.
3198
3199 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3200
3201         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
3202
3203 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
3204
3205         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3206         (mn10200_opcodes): Use it for some logicals and btst insns.
3207         Add "break" and "trap" instructions.
3208
3209         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3210
3211         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3212
3213 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3214
3215         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3216         relative load or add now depends upon whether the instruction is
3217         in a delay slot.
3218
3219 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
3220
3221         * mn10200-dis.c: Finish writing disassembler.
3222         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3223         Fix mask for "jmp (an)".
3224
3225         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3226         handle endianness issues for mn10300.
3227
3228         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3229
3230 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
3231
3232         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3233         instruction.  Fix opcode field for "movb (imm24),dn".
3234
3235         * mn10200-opc.c (mn10200_operands): Fix insertion position
3236         for DI operand.
3237
3238 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
3239
3240         * mn10200-opc.c: Create mn10200 opcode table.
3241         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
3242         but moving along nicely.
3243
3244 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3245
3246         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
3247
3248 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
3249
3250         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3251         specifiers for fmovem* instructions.
3252
3253 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
3254
3255         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3256
3257 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
3258
3259         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3260         with dsrl.
3261
3262 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
3263
3264         * mn10300-opc.c: Add some comments explaining the various
3265         operands and such.
3266
3267         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3268
3269 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3270
3271         * m68k-dis.c (print_insn_arg): Handle new < and > operand
3272         specifiers.
3273
3274         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3275         operand specifiers in fmovm* instructions.
3276
3277 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
3278
3279         * ppc-opc.c (insert_li): Give an error if the offset has the two
3280         least significant bits set.
3281
3282 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3283
3284         * mips-dis.c (print_insn_mips16): Separate the instruction from
3285         the arguments with a tab, not a space.
3286
3287 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
3288
3289         * mn10300-dis.c (disasemble): Finish conversion to '$' as
3290         register prefix.
3291
3292         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3293         mov am,(imm32,sp).
3294
3295 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
3296
3297         * configure: Rebuild with autoconf 2.12.
3298
3299         Add support for mips16 (16 bit MIPS implementation):
3300         * mips16-opc.c: New file.
3301         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3302         (mips16_reg_names): New static array.
3303         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3304         after seeing a 16 bit symbol.
3305         (print_insn_little_mips): Likewise.
3306         (print_insn_mips16): New static function.
3307         (print_mips16_insn_arg): New static function.
3308         * mips-opc.c: Add jalx instruction.
3309         * Makefile.in (mips16-opc.o): New target.
3310         * configure.in: Use mips16-opc.o for bfd_mips_arch.
3311         * configure: Rebuild.
3312
3313 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
3314
3315         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3316         operand specifiers in *save, *restore and movem* instructions.
3317
3318         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3319         the coldfire.
3320
3321         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3322         register operands for immediate arithmetic, not, neg, negx, and
3323         set according to condition instructions.
3324
3325         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3326         specifier of the effective-address operand in immediate forms of
3327         arithmetic instructions.  The specifier for the immediate operand
3328         notes how and where the constant will be stored.
3329
3330 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
3331
3332         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3333         opcode.
3334
3335         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3336         register prefix.
3337
3338         * mn10300-dis.c (disassemble): Prefix registers with '%'.
3339
3340 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
3341
3342         * mn10300-dis.c (disassemble): Handle register lists.
3343
3344         * mn10300-opc.c: Fix handling of register list operand for
3345         "call", "ret", and "rets" instructions.
3346
3347         * mn10300-dis.c (disassemble): Print PC-relative and memory
3348         addresses symbolically if possible.
3349         * mn10300-opc.c: Distinguish between absolute memory addresses,
3350         pc-relative offsets & random immediates.
3351
3352         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3353         in 7 byte insns.
3354         (disassemble): Handle SPLIT and EXTENDED operands.
3355
3356 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
3357
3358         * mn10300-dis.c: Rough cut at printing some operands.
3359
3360         * mn10300-dis.c: Start working on disassembler support.
3361         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3362
3363         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3364         list.
3365         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3366
3367 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3368
3369         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3370
3371 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
3372
3373         * mn10300-opc.c (mn10300_opcodes): Demand parens around
3374         register argument is calls and jmp instructions.
3375
3376 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
3377
3378         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3379         getx operand.  Fix opcode for mulqu imm,dn.
3380
3381 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
3382
3383         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3384         in MN10300_OPERAND_SPLIT operands for how many bits
3385         appear in the basic insn word.  Add IMM32_HIGH24,
3386         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3387         (mn10300_opcodes): Use new operands as needed.
3388
3389         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3390         for bset, bclr, btst instructions.
3391         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3392
3393         * mn10300-opc.c (mn10300_operands): Remove many redundant
3394         operands.  Update opcode table as appropriate.
3395         (IMM32): Add MN10300_OPERAND_SPLIT flag.
3396         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3397
3398 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
3399
3400         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3401         operands (for indexed load/stores).  Fix bitpos for DI
3402         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3403         few instructions that insert immediates/displacements in the
3404         middle of the instruction.  Add IMM8E for 8 bit immediate in
3405         the extended part of an instruction.
3406         (mn10300_operands): Use new opcodes as appropriate.
3407
3408 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3409
3410         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3411         sequential so the assembler never parallelizes it with
3412         other instructions.
3413
3414 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
3415
3416         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3417         a data/address register that appears in register field 0
3418         and register field 1.
3419         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3420
3421 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
3422
3423         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3424         standard disassembly.
3425
3426         * alpha-opc.c (alpha_operands): Rearrange flags slot.
3427         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3428         Recategorize PALcode instructions.
3429
3430 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
3431
3432         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3433
3434 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
3435
3436         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3437         there are no operand types.
3438
3439 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
3440
3441         * v850-opc.c (D9_RELAX): Renamed from D9, all references
3442         changed.
3443         (v850_operands): Make sure D22 immediately follows D9_RELAX.
3444
3445 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
3446
3447         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3448
3449 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
3450
3451         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3452         and sst.w instructions.
3453
3454         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3455         "bCC"instructions).
3456
3457 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3458
3459         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3460         and the arguments.
3461
3462 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
3463
3464         * ppc-opc.c (PPCPWR2): Define.
3465         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3466         it.
3467
3468 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
3469
3470         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3471         field for movhu instruction.
3472
3473         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3474         cast value to "long" not "signed long" to keep hpux10
3475         compiler quiet.
3476
3477 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
3478
3479         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3480         for mov (abs16),DN.
3481
3482         * mn10300-opc.c (FMT*): Remove definitions.
3483
3484         * mn10300-opc.c (mn10300_opcodes): Fix destination register
3485         for shift-by-register opcodes.
3486
3487         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3488         into [AD][MN][01] for encoding the position of the register
3489         in the opcode.
3490
3491 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
3492
3493         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3494         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3495
3496 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
3497
3498         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3499         Fix various typos.  Add "PAREN" operand.
3500         (MEM, MEM2): Define.
3501         (mn10300_opcodes): Surround all memory addresses with "PAREN"
3502         operands.  Fix several typos.
3503
3504         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3505         changes.
3506
3507 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
3508
3509         * mn10300-opc.c (FMT_XX): Renumber starting at one.
3510         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
3511         at this time.
3512         (mn10300_opcodes): Break opcode format out into its own field.
3513         Update many operand fields to deal with signed vs unsigned
3514         issues.  Fix one or two typos in the "mov" instruction
3515         opcode, mask and/or operand fields.
3516
3517 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3518
3519         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3520         m68851 wasn't reset.
3521
3522 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3523
3524         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3525         all opcodes.  Very rough cut at operands for all opcodes.
3526
3527         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3528         opcode table.
3529
3530 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
3531
3532         * mn10200-opc.c, mn10300-opc.c: New files.
3533         * mn10200-dis.c, mn10300-dis.c: New files.
3534         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3535         * disassemble.c: Break mn10x00 support into 10200 and 10300
3536         support.
3537         * configure.in: Likewise.
3538         * configure: Rebuilt.
3539
3540 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3541
3542         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3543
3544 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
3545
3546         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3547         MN10x00 processors.
3548         * disassemble (ARCH_mn10x00): Define.
3549         (disassembler): Handle bfd_arch_mn10x00.
3550         * configure.in: Recognize bfd_mn10x00_arch.
3551         * configure: Rebuilt.
3552
3553 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
3554
3555         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
3556         accordingly.  Don't declare functions using op_rtn.
3557
3558 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
3559
3560         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
3561         params to be more standard.
3562         * (disassemble):  Print absolute addresses and symbolic names for
3563         branch and jump targets.
3564         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
3565         bit operands.
3566         * (v850_opcodes):  Add breakpoint insn.
3567
3568 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3569
3570         * m68k-opc.c: Move the fmovemx data register cases before the
3571         other cases, so that they get recognized before the data register
3572         does gets treated as a degenerate register list.
3573
3574 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3575
3576         * mips-opc.c: Add a case for "div" and "divu" with two registers
3577         and a destination of $0.
3578
3579 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
3580
3581         * mips-dis.c (print_insn_arg): Add prototype.
3582         (_print_insn_mips): Ditto.
3583
3584 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3585
3586         * mips-dis.c (print_insn_arg): Print condition code registers as
3587         $fccN.
3588
3589 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
3590
3591         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3592
3593 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
3594
3595         * v850-dis.c (disassemble): Make static.  Provide prototype.
3596
3597 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
3598
3599         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3600         in range checks.
3601
3602 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
3603
3604         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3605         ']' characters into the output stream.
3606         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3607         Add "memop" field to all opcodes (for the disassembler).
3608         Reorder opcodes so that "nop" comes before "mov" and "jr"
3609         comes before "jarl".
3610
3611         * v850-dis.c (print_insn_v850): Fix typo in last change.
3612
3613         * v850-dis.c (print_insn_v850): Properly handle disassembling
3614         a two byte insn at the end of a memory region when the memory
3615         region's size is only two byte aligned.
3616
3617         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3618
3619         * v850-dis.c (v850_reg_names): Define.
3620         (v850_sreg_names, v850_cc_names): Likewise.
3621         (disassemble): Very rough cut at printing operands (unformatted).
3622
3623         * v850-opc.c (BOP_MASK): Fix.
3624         (v850_opcodes): Fix mask for jarl and jr.
3625
3626         * v850-dis.c: New file.  Skeleton for disassembler support.
3627         * Makefile.in Remove v850 references, they're not needed here.
3628         * configure.in: Add v850-dis.o when building v850 toolchains.
3629         * configure: Rebuilt.
3630         * disassemble.c (disassembler): Call v850 disassembler.
3631
3632         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3633         (insert_d8_6, extract_d8_6): New functions.
3634         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3635         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3636         Add D8_6.
3637         (IF4A, IF4B): Use "D7" instead of "D7S".
3638         (IF4C, IF4D): Use "D8_7" instead of "D8".
3639         (IF4E, IF4F): New.  Use "D8_6".
3640         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
3641         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
3642
3643         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3644         (v850_operands): Change D16 to D16_15, use special insert/extract
3645         routines.  New new D16 that uses the generic insert/extract code.
3646         (IF7A, IF7B): Use D16_15.
3647         (IF7C, IF7D): New.  Use D16.
3648         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3649
3650         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3651         message.  Issue an error if the branch offset is odd.
3652
3653         * v850-opc.c: Add notes about needing special insert/extract
3654         for all the load/store insns, except "ld.b" and "st.b".
3655
3656         * v850-opc.c (insert_d22, extract_d22): New functions.
3657         (v850_operands): Use insert_d22 and extract_d22 for
3658         D22 operands.
3659         (insert_d9): Fix range check.
3660
3661 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3662
3663         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3664         and set bits field to D9 and D22 operands.
3665
3666 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
3667
3668         * v850-opc.c (v850_operands): Define SR2 operand.
3669         (v850_opcodes): "ldsr" uses R1,SR2.
3670
3671         * v850-opc.c (v850_opcodes): Fix opcode specs for
3672         sld.w, sst.b, sst.h, sst.w, and nop.
3673
3674 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
3675
3676         * v850-opc.c (v850_opcodes): Add null opcode to mark the
3677         end of the opcode table.
3678
3679 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3680
3681         * d10v-opc.c (pre_defined_registers): Added register pairs,
3682         "r0-r1", "r2-r3", etc.
3683
3684 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
3685
3686         * v850-opc.c (v850_operands): Make I16 be a signed operand.
3687         Create I16U for an unsigned 16bit mmediate operand.
3688         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3689
3690         * v850-opc.c (v850_operands): Define EP operand.
3691         (IF4A, IF4B, IF4C, IF4D): Use EP.
3692
3693         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3694         with immediate operand, "movhi".  Tweak "ldsr".
3695
3696         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3697         correct.  Get sld.[bhw] and sst.[bhw] closer.
3698
3699         * v850-opc.c (v850_operands): "not" is a two byte insn
3700
3701         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3702
3703         * v850-opc.c (v850_operands): D16 inserts at offset 16!
3704
3705         * v850-opc.c (two): Get order of words correct.
3706
3707         * v850-opc.c (v850_operands): I16 inserts at offset 16!
3708
3709         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3710         register source and destination operands.
3711         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3712
3713         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
3714         same thinko in "trap" opcode.
3715
3716         * v850-opc.c (v850_opcodes): Add initializer for size field
3717         on all opcodes.
3718
3719         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
3720         Add D8 for 8-bit unsigned field in short load/store insns.
3721         (IF4A, IF4D): These both need two registers.
3722         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
3723         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3724         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
3725         for "ldsr" and "stsr".
3726         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3727         is unsigned.
3728
3729         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3730         short store word (sst.w).
3731
3732 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3733
3734         * v850-opc.c (v850_operands): Added insert and extract fields,
3735         pointers to functions that handle unusual operand encodings.
3736
3737 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
3738
3739         * v850-opc.c (v850_opcodes): Enable "trap".
3740
3741         * v850-opc.c (v850_opcodes): Fix order of displacement
3742         and register for "set1", "clr1", "not1", and "tst1".
3743
3744 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
3745
3746         * v850-opc.c (v850_operands): Add "B3" support.
3747         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3748         and "tst1".
3749
3750         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3751
3752         * v850-opc.c: Close unterminated comment.
3753
3754 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3755
3756         * v850-opc.c (v850_operands): Add flags field.
3757         (v850_opcodes): add move opcodes.
3758
3759 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3760
3761         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3762         * configure: (bfd_v850v_arch) Add new case.
3763         * configure.in: (bfd_v850_arch) Add new case.
3764         * v850-opc.c: New file.
3765
3766 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
3767
3768         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3769
3770 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3771
3772         * d10v-opc.c: Add additional information to the opcode
3773         table to help determinine which instructions can be done
3774         in parallel.
3775
3776 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
3777
3778         * mpw-make.sed: Update editing of include pathnames to be
3779         more general.
3780
3781 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
3782
3783         * arm-opc.h: Added "bx" instruction definition.
3784
3785 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
3786
3787         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3788
3789 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3790
3791         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3792
3793 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3794
3795         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3796
3797 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
3798
3799         * makefile.vms: Update for alpha-opc changes.
3800
3801 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3802
3803         * i386-dis.c (print_insn_i386): Actually return the correct value.
3804         (ONE, OP_ONE): #ifdef out; not used.
3805
3806 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3807
3808         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3809         Changed subi operand type to treat 0 as 16.
3810
3811 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
3812
3813         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
3814         <rose@netcom.com>.
3815
3816 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
3817
3818         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3819         memory transfer instructions. Add new format string entries %h and %s.
3820         * arm-dis.c: (print_insn_arm): Provide decoding of the new
3821         formats %h and %s.
3822
3823 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3824
3825         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3826         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3827
3828 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
3829
3830         * alpha-dis.c (print_insn_alpha_osf): Remove.
3831         (print_insn_alpha_vms): Remove.
3832         (print_insn_alpha): Make globally visible.  Chose the register
3833         names based on info->flavour.
3834         * disassemble.c: Always return print_insn_alpha for the alpha.
3835
3836 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3837
3838         * d10v-dis.c (dis_long): Handle unknown opcodes.
3839
3840 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3841
3842         * d10v-opc.c: Changes to support signed and unsigned numbers.
3843         All instructions with the same name that have long and short forms
3844         now end in ".l" or ".s".  Divs added.
3845         * d10v-dis.c: Changes to support signed and unsigned numbers.
3846
3847 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3848
3849         * d10v-dis.c: Change all functions to use info->print_address_func.
3850
3851 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3852
3853         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3854         move ccr/sr insns more strict so that the disassembler only
3855         selects them when the addressing mode is data register.
3856
3857 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3858         * d10v-opc.c (pre_defined_registers):  Declare.
3859         * d10v-dis.c (print_operand): Now uses pre_defined_registers
3860         to pick a better name for the registers.
3861
3862 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
3863
3864         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
3865         operands for fexpand and fpmerge.  From Christian Kuehnke
3866         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3867
3868 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
3869
3870         * alpha-dis.c (print_insn_alpha): No longer the user-visible
3871         print routine.  Take new regnames and cpumask arguments.
3872         Kill the environment variable nonsense.
3873         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
3874         (print_insn_alpha_vms): New function.  Do VMS style regnames.
3875         * disassemble.c (disassembler): Test bfd flavour to pick
3876         between OSF and VMS routines.  Default to OSF.
3877
3878 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
3879
3880         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3881         * configure: Rebuild.
3882         * Makefile.in (install): Use @INSTALL_SHLIB@.
3883
3884 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3885
3886         * configure: (bfd_d10v_arch) Add new case.
3887         * configure.in: (bfd_d10v_arch) Add new case.
3888         * d10v-dis.c: New file.
3889         * d10v-opc.c: New file.
3890         * disassemble.c (disassembler) Add entry for d10v.
3891
3892 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3893
3894         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3895         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3896
3897 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
3898
3899         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
3900         distinguish between variants of the instruction set.
3901         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
3902         distinguish between variants of the instruction set.
3903
3904 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
3905
3906         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
3907         the 8086 instruction set.
3908         * i386-dis.c:  General cleanups.  Make most things static.  Add
3909         prototypes.  Get rid of static variables aflags and dflags.  Pass
3910         them as args (to almost everything).
3911
3912 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
3913
3914         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3915
3916         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3917
3918         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3919         if the next arg is marked with SRC_IN_DST.  Gross.
3920
3921         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3922         we're looking for and find EXR.
3923
3924         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3925         if we're looking for KBIT and we don't find it.
3926
3927         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3928         for L_3 and L_2.
3929
3930         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3931         3bit immediate operands.
3932
3933 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3934
3935         * Released binutils 2.7.
3936
3937         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
3938         <kkaempf@progis.ac-net.de>.
3939
3940 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3941
3942         * alpha-opc.c: Correct second case of "mov" to use OPRL.
3943
3944 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
3945
3946         * sparc-dis.c (print_insn_sparclite):  New routine to print
3947         sparclite instructions.
3948
3949 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3950
3951         * m68k-opc.c (m68k_opcodes): Add coldfire support.
3952
3953 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
3954
3955         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3956         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3957         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3958
3959 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3960
3961         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3962         Use autoconf-set values.
3963         (docdir, oldincludedir): Removed.
3964         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3965
3966 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
3967
3968         * alpha-opc.c: New file.
3969         * alpha-opc.h: Remove.
3970         * alpha-dis.c: Complete rewrite to use new opcode table.
3971         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3972         * configure: Rebuild with autoconf 2.10.
3973         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3974         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3975         alpha-opc.h.
3976         (alpha-opc.o): New target.
3977
3978 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
3979
3980         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3981         Set imm_added_to_rs1 even if the source and destination register
3982         are not the same.
3983
3984         * sparc-opc.c: Add some two operand forms of the wr instruction.
3985
3986 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
3987
3988         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3989         to just "mode".
3990
3991         * disassemble.c (disassembler): Handle H8/S.
3992         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3993
3994 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
3995
3996         * sparc-opc.c: Add beq/teq as aliases for be/te.
3997
3998         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
3999         <sergei@msil.sps.mot.com>.
4000
4001 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
4002
4003         * makefile.vms: New file.
4004
4005         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
4006
4007 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
4008
4009         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
4010         regardless of plen.
4011
4012 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
4013
4014         * i386-dis.c (OP_OFF): Call append_prefix.
4015
4016 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
4017
4018         * ppc-opc.c (instruction encoding macros): Add explicit casts to
4019         unsigned long to silence a warning from the Solaris PowerPC
4020         compiler.
4021
4022 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
4023
4024         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
4025
4026 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
4027
4028         * sparc-dis.c (X_IMM,X_SIMM): New macros.
4029         (X_IMM13): Delete.
4030         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
4031         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
4032         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
4033         cpush, cpusha, cpull sparclet insns.
4034
4035 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
4036
4037         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
4038
4039 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
4040
4041         * sparc-opc.c: Set F_FBR on floating point branch instructions.
4042         Set F_FLOAT on other floating point instructions.
4043
4044 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
4045
4046         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
4047         registers.
4048         (powerpc_opcodes): Add 860/821 specific SPRs.
4049
4050 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
4051
4052         * configure.in: Permit --enable-shared to specify a list of
4053         directories.  Set and substitute BFD_PICLIST.
4054         * configure: Rebuild.
4055         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
4056         uses.  Set to @BFD_PICLIST@.
4057
4058 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
4059
4060         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
4061         not "abs", which may be needed for the absolute in something
4062         like btst #0,@10:8.  Print L_3 immediates separately from other
4063         immediates.  Change ABSMOV reference to ABS8MEM.
4064
4065 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
4066
4067         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4068         (current_arch_mask): New static global.
4069         (compute_arch_mask): New static function.
4070         (print_insn_sparc): Delete sparc_v9_p.  New static local
4071         current_mach.  Resort opcode table if current_mach changes.
4072         Generalize "insn not supported" test.
4073         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4074         Delete test for v9/!v9.
4075         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4076         (v6notlet): Define.
4077         (brfc): Split into CBR and FBR for coprocessor/fp branches.
4078         (brfcx): Renamed to FBRX.
4079         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
4080         coprocessor mnemonics are not supported on the sparclet).
4081         (condf): Renamed to CONDF.
4082         (SLCBCC2): Delete F_ALIAS flag.
4083
4084 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
4085
4086         * sparc-opc.c (sparc_opcodes): rd must be 0 for
4087         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
4088
4089 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
4090
4091         * Makefile.in (config.status): Depend upon BFD VERSION file, so
4092         that the shared library version number is set correctly.
4093
4094 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
4095
4096         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
4097         Miles Bader <miles@gnu.ai.mit.edu>.
4098         * configure: Rebuild.
4099
4100 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
4101
4102         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4103         malloc.
4104
4105 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
4106
4107         * configure: Rebuild with autoconf 2.8.
4108
4109 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
4110
4111         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4112         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4113
4114 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
4115
4116         * configure.in: Don't set SHLIB or SHLINK to an empty string,
4117         since they appear as targets in Makefile.in.
4118         * configure: Rebuild.
4119
4120 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
4121
4122         * mpw-make.sed: Edit out shared library support bits.
4123
4124 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
4125
4126         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4127         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4128         (sparc_opcodes): Add sparclet insns.
4129         (sparclet_cpreg_table): New static local.
4130         (sparc_{encode,decode}_sparclet_cpreg): New functions.
4131         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4132
4133 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
4134
4135         * i386-dis.c (index16): New static variable.
4136         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4137         other way around.
4138         (OP_indirE): Return result of OP_E.
4139         (OP_E): Check for 16 bit addressing mode, and disassemble
4140         correctly.  Optimised 32 bit case a little.  Don't print
4141         "(base,index,scale)" when sib specifies only an offset.
4142
4143 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
4144
4145         * configure.in: Set and substitute SHLIB_DEP.
4146         * configure: Rebuild.
4147         * Makefile.in (SHLIB_DEP): New variable.
4148         (LIBIBERTY_LISTS, BFD_LIST): New variables.
4149         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
4150         COMMON_SHLIB, add them to piclist with appropriate modifications.
4151         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
4152         here: just use piclist.
4153
4154 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
4155
4156         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4157         (print_insn_sparc): Rewrite v9/not-v9 tests.
4158         (compare_opcodes): Likewise.
4159         * sparc-opc.c (MASK_<ARCH>): Define.
4160         (v6,v7,v8,sparclite,v9,v9a): Redefine.
4161         (sparclet,v6notv9): Define.
4162         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
4163         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4164
4165 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
4166
4167         * configure.in: Call AC_PROG_CC before configure.host.
4168         * configure: Rebuild.
4169
4170         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4171
4172 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
4173
4174         * i386-dis.c (onebyte_has_modrm): New static array.
4175         (twobyte_has_modrm): New static array.
4176         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4177
4178 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
4179
4180         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4181         $(SHLINK).
4182
4183 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
4184
4185         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4186         doesn't conflict.
4187
4188 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
4189
4190         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4191         m68010up, not just m68020up | cpu32.
4192
4193         * Makefile.in (SONAME): New variable.
4194         ($(SHLINK)): Make a link to the transformed name, as well.
4195         (stamp-tshlink): New target.
4196         (install): Skip stamp-tshlink during install.
4197
4198 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
4199
4200         * configure.in: Call AC_ARG_PROGRAM.
4201         * configure: Rebuild.
4202         * Makefile.in (program_transform_name): New variable.
4203         (install): Transform library name before installing it.
4204
4205 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
4206
4207         * i960-dis.c (mem): Add HX dcinva instruction.
4208
4209         Support for building as a shared library, based on patches from
4210         Alan Modra <alan@spri.levels.unisa.edu.au>:
4211         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4212         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4213         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4214         * configure: Rebuild.
4215         * Makefile.in (ALLLIBS): New variable.
4216         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4217         (COMMON_SHLIB, SHLINK): New variables.
4218         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4219         (STAGESTUFF): Remove variable.
4220         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4221         (stamp-piclist, piclist): New targets.
4222         ($(SHLIB), $(SHLINK)): New targets.
4223         ($(OFILES)): Depend upon stamp-picdir.
4224         (disassemble.o): Build twice if PICFLAG is set.
4225         (MOSTLYCLEAN): Add pic/*.o.
4226         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4227         (distclean): Remove pic and stamp-picdir.
4228         (install): Install shared libraries.
4229         (stamp-picdir): New target.
4230
4231 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
4232
4233         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4234         Print unknown instruction as "unknown", rather than in hex.
4235
4236 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
4237
4238         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4239
4240 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
4241
4242         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4243
4244 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
4245
4246         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4247         when necessary.  From Ulrich Drepper
4248         <drepper@myware.rz.uni-karlsruhe.de>.
4249
4250 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
4251
4252         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4253         sparc_num_opcodes.  Update architecture enum values.
4254         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4255         (sparc_opcode_lookup_arch): New function.
4256         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4257         (sparc_opcodes): Add v9a shutdown insn.
4258
4259 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
4260
4261         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4262         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
4263         architecture.
4264         (print_insn_sparc64): Deleted.
4265         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4266         print_insn_sparc.
4267
4268         * sparc-opc.c (architecture_pname): Add v9a.
4269
4270 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
4271
4272         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4273         incorrectly defined as 0x16 when it should be 0x15.
4274         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4275         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
4276         excb (exception barrier) which is defined in the Alpha
4277         Architecture Handbook version 2.
4278         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4279         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
4280         disassembled as or, for example.
4281
4282 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
4283
4284         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4285         (_print_insn_mips): Change i from int to unsigned int.
4286
4287 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
4288
4289         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4290         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
4291
4292 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
4293
4294         * i386-dis.c: Added Pentium Pro instructions.
4295
4296 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4297
4298         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4299         being for Power2.
4300
4301 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4302
4303         * sh-opc.h (sh_nibble_type): Added REG_B.
4304         (sh_arg_type): Added A_REG_B.
4305         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4306         and stc.l opcodes.
4307         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4308
4309 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
4310
4311         * disassemble.c (disassembler): Use new bfd_big_endian macro.
4312
4313 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
4314
4315         * Makefile.in (distclean): Remove stamp-h.  From Ronald
4316         F. Guilmette <rfg@monkeys.com>.
4317
4318 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
4319
4320         From David Mosberger-Tang  <davidm@azstarnet.com>:
4321         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4322         instruction.
4323
4324 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4325
4326         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4327         (sh_table): Added many SH3 opcodes.
4328         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4329
4330 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4331
4332         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4333         (subco,subco.): Mark this PPC, not PPCCOM.
4334
4335 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
4336
4337         * configure: Rebuild with autoconf 2.7.
4338
4339 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
4340
4341         * configure: Rebuild with autoconf 2.6.
4342
4343 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
4344
4345         * configure.in: Sort list of architectures.  Accept but do nothing
4346         for alliant, convex, pyramid, romp, and tahoe.
4347
4348 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
4349
4350         * a29k-dis.c (print_special): Change num to unsigned int.
4351
4352 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
4353
4354         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4355         shifting it.
4356
4357 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
4358
4359         * configure.in: Call AC_CHECK_PROG to find and cache AR.
4360         * configure: Rebuilt.
4361
4362 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
4363
4364         * configure.in: Add case for bfd_i860_arch.
4365         * configure: Rebuild.
4366
4367 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
4368
4369         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4370         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4371         (NEXTDOUBLE): Likewise.
4372         (print_insn_m68k): Don't match fmoveml if there is more than one
4373         register in the list.
4374         (print_insn_arg): Handle a place of '8' for a type of 'L'.
4375
4376 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
4377
4378         * m68k-opc.c: Use #W rather than #w.
4379         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4380
4381 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
4382
4383         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4384         and likewise for all the dbxx opcodes.
4385
4386 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
4387
4388         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4389
4390 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
4391
4392         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4393         the VR4100 specific instructions to the mips_opcodes structure.
4394
4395 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
4396
4397         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4398         ugly Metrowerks bug in CW6, is fixed in CW7.
4399
4400 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4401
4402         * ppc-opc.c (whole file): Add flags for common/any support.
4403
4404 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
4405
4406         * Makefile.in (BISON): Remove macro.
4407         (FLAGS_TO_PASS): Remove BISON.
4408
4409 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
4410
4411         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
4412
4413         * m68k-dis.c (print_insn_m68k): Recognize all two-word
4414         instructions that take no args by looking at the match mask.
4415         (print_insn_arg): Always print "%" before register names.
4416         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4417         [case '_']: Don't print "@#" before address.
4418         [case 'J']: Use "%s" as format string, not register name.
4419         [case 'B']: Treat place == 'C' like 'l' and 'L'.
4420
4421 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
4422
4423         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4424         name correctly.
4425
4426 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
4427
4428         From David Mosberger-Tang  <davidm@azstarnet.com>
4429
4430         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4431         (alpha_insn_set): added definitions for VAX floating point
4432         instructions (Unix compilers don't generate these, but handcoded
4433         assembly might still use them).
4434
4435         * alpha-dis.c (print_insn_alpha): added support for disassembling
4436         the miscellaneous instructions in the Alpha instruction set.
4437
4438 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
4439
4440         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4441         no longer create sysdep.h, sed ppc-opc.c to work around a
4442         serious Metrowerks C bug.
4443         * mpw-make.in: Remove.
4444         * mpw-make.sed: New file, used by mpw-configure to edit
4445         Makefile.in into an MPW makefile.
4446
4447 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
4448
4449         * Makefile.in (maintainer-clean): New synonym for realclean.
4450
4451 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4452
4453         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4454         which use '0', '1', and '2' instead.  Specify the proper size for
4455         a pmove immediate operand.  Correct the pmovefd patterns to be
4456         moves to a register, not from a register.
4457         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4458
4459 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
4460
4461         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4462         %psr, %wim, %tbr as F_NOTV9.
4463
4464 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
4465
4466         * Makefile.in (Makefile): Just rebuild Makefile when running
4467         config.status.
4468         (config.h, stamp-h): New targets.
4469         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4470         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
4471         rebuilding config.h.
4472         * configure: Rebuild.
4473
4474         * mips-opc.c: Change unaligned loads and stores with "t,A"
4475         operands to use "t,A(b)".
4476
4477 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4478
4479         * sh-dis.c (print_insn_shx): Add F_FR0 support.
4480
4481 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4482
4483         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4484         until 3 instead of until 2.
4485
4486 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
4487
4488         * Makefile.in (ALL_CFLAGS): Define.
4489         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4490         (MOSTLYCLEAN): Add config.log.
4491         (distclean): Don't remove config.log.
4492         * configure.in: Substitute HDEFINES.
4493         * configure: Rebuild.
4494
4495 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4496
4497         * sh-opc.h (sh_arg_type): Add F_FR0.
4498         (sh_table, case fmac): Add F_FR0 as first argument.
4499
4500 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4501
4502         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4503
4504 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
4505
4506         * sparc-dis.c: Remove all references to NO_V9.
4507
4508 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
4509
4510         * aclocal.m4: Just include ../bfd/aclocal.m4.
4511         * configure: Rebuild.
4512
4513 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
4514
4515         * sparc-dis.c (X_DISP19): Define.
4516         (print_insn, case 'G'): Use it.
4517         (print_insn, case 'L'): Sign extend displacement.
4518
4519 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
4520
4521         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4522         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
4523         host_makefile_frag or frags.
4524         * aclocal.m4: New file.
4525         * configure: Rebuild.
4526         * Makefile.in (INSTALL): Set to @INSTALL@.
4527         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4528         (INSTALL_DATA): Set to @INSTALL_DATA@.
4529         (AR): Set to @AR@.
4530         (AR_FLAGS): Set to rc rather than qc.
4531         (CC): Define as @CC@.
4532         (CFLAGS): Set to @CFLAGS@.
4533         (@host_makefile_frag@): Remove.
4534         (config.status): Remove dependency upon @frags@.
4535
4536         * configure.in: ../bfd/config.bfd now just sets shell variables.
4537         Use them rather than looking through target Makefile fragments.
4538         * configure: Rebuild.
4539
4540 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4541
4542         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4543
4544 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
4545
4546         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4547         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4548         sparc64 insns.
4549
4550         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4551         (lookup_{name,value}): New functions.
4552         (prefetch_table): New static local.
4553         (sparc_{encode,decode}_prefetch): New functions.
4554         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4555
4556 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4557
4558         * sh-opc.h: Add blank lines to improve readabililty of sh3e
4559         instructions.
4560
4561 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4562
4563         * sh-dis.c: Correct comment on first line of file.
4564
4565 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
4566
4567         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4568
4569         * sparc-opc.c (asi, membar): New static locals.
4570         (sparc_{encode,decode}_{asi,membar}): New functions.
4571         (sparc_opcodes, membar insn): Fix.
4572         * sparc-dis.c (print_insn): Call sparc_decode_asi.
4573         Support decoding of membar masks.
4574         (X_MEMBAR): Define.
4575
4576 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
4577
4578         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4579
4580 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4581
4582         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4583         and likewise for the other branches.  Add bhs as an alias for bcc,
4584         and likewise for the size variants.  Add dbhs as an alias for
4585         dbcc.
4586
4587 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
4588
4589         * sh-opc.h (FP sts instructions): Update to match reality.
4590
4591 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
4592
4593         * m68k-dis.c: (fpcr_names): Add % before all register names.
4594         (reg_names): Likewise.
4595         (print_insn_arg): Don't explicitly print % before register names.
4596         Add % before register names in static array names.  In case 'r',
4597         print data registers as `@(Dn)', not `Dn@'.  When printing a
4598         memory address, don't print @# before it.
4599         (print_indexed): Change base_disp and outer_disp from int to
4600         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
4601         syntax.  Sign extend 8 byte displacement correctly.
4602         (print_base): Print using MIT syntax.  Print zpc when appropriate.
4603         Change parameter disp from int to bfd_vma.
4604
4605         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4606         for jsr.
4607
4608 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4609
4610         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4611         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4612         * sh-opc.h (sh_arg_type): Add new operand types.
4613         (sh_table): Add new opcodes from SH3E Floating Point ISA.
4614
4615 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4616
4617         * Makefile.in (distclean): Remove generated file config.h.
4618
4619 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4620
4621         * Makefile.in (distclean): Remove generated file config.h.
4622
4623 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
4624
4625         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4626         Clean up tables.
4627         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4628         (opcode): Remove.
4629         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
4630         rather than numopcodes.  Use m68k_opcodes rather than removed
4631         opcode function.  Don't check F_ALIAS.
4632         (print_insn_arg): Change first parameter to be const char *.
4633         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4634         (m68k-opc.o): New target.
4635         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4636         * configure: Rebuild.
4637
4638 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
4639
4640         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4641         (opcode_bits, opcode_hash_table): New variables.
4642         (opcodes_initialized): Renamed from opcodes_sorted.
4643         (build_hash_table): New function.
4644         (is_delayed_branch): Use hash table.
4645         (print_insn): Renamed from print_insn_sparc, made static.
4646         Build and use hash table.  If !sparc64, ignore sparc64 insns,
4647         and vice-versa if sparc64.
4648         (print_insn_sparc, print_insn_sparc64): New functions.
4649         (compare_opcodes): Move sparc64 opcodes to end.
4650         Print commutative insns with constant second.
4651         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4652
4653 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4654
4655         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
4656         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
4657         avoids printing a delay slot in a delay slot.
4658         * sh-opc.h (sh_table): Fully bracket last entry.
4659
4660 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
4661
4662         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4663
4664 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
4665
4666         * configure.in: Get host_makefile_frag from ${srcdir}.
4667
4668         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
4669         config.h from config.in.  Don't set up sysdep.h link.
4670         * sysdep.h: New file.
4671         * configure, config.in: New files, generated from configure.in.
4672         * Makefile.in: Updated to be processed autoconf-style.
4673         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
4674         (Makefile): Depend on config.status.
4675         (config.status): New rule.
4676         * configure.bat: Update Makefile substitutions.
4677
4678 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
4679
4680         * mips-opc.c (L1): Define.
4681         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4682         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4683         and wb.
4684
4685 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4686
4687         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4688         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4689         have multiple add units but only a single logical unit.
4690
4691         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4692         shifted by 18, without any insertion or extraction function.
4693         (insert_cr, extract_cr): Remove.
4694
4695 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4696
4697         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4698         register names.
4699
4700 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
4701
4702         * mpw-config.in: Add sh and i386 configs, remove sparc config.
4703         * sh-opc.h: Add copyright.
4704
4705 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
4706
4707         * Makefile.in (crunch-m68k): Delete extra target accidentally
4708         checked in a while ago.
4709
4710 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4711
4712         * sh-opc.h (sh_table): Add SH3 support.
4713
4714 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
4715
4716         * sh-opc.h: Added bsrf and braf.
4717
4718 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4719
4720         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
4721         bogus [ls]fm{ea,fd} patterns.
4722
4723         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4724         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4725         initialize it from memory.  Make function static.
4726         (print_insn_{big,little}_arm): New functions.
4727         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4728         the correct endianness.
4729
4730 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
4731
4732         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4733         enum list.
4734
4735 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4736
4737         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4738         17th, so that it builds again using GCC as the compiler.
4739
4740 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4741
4742         * mips-dis.c (print_insn_little_mips): Cast return value from
4743         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4744         expects an unsigned long, and that might be fewer words of
4745         argument storage (e.g., if bfd_vma is long long on a 32-bit
4746         machine).
4747         (print_insn_big_mips): Likewise with bfd_getb32 value.
4748         (_print_insn_mips): Now static.
4749
4750 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
4751
4752         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4753         gcc memory hog problem with initializer is fixed.
4754
4755 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
4756
4757         Merge in support for Mac MPW as a host.
4758         (Old change descriptions retained for informational value.)
4759
4760         * mpw-config.in (archname): Compute from the config.
4761         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4762
4763         * mpw-config.in (target_arch): Compute from canonical target.
4764         (m68k, mips, powerpc, sparc): Add architectures.
4765         * mpw-make.in (disassemble.c.o): Add.
4766         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4767
4768         * mpw-config.in (BFD_MACHINES): Set to a default value.
4769         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4770
4771         * mpw-make.in (CSEARCH): Add extra-include to search path.
4772
4773         * mpw-config.in (varargs.h): Don't create.
4774         (sysdep.h): Create using forward-include.
4775         * mpw-make.in (CSEARCH): Add include/mpw to search path.
4776
4777         * mpw-config.in: New file, MPW version of configure.in.
4778         * mpw-make.in: New file, MPW version of Makefile.in.
4779
4780 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4781
4782         * alpha-dis.c (print_insn_alpha): Put empty statement after
4783         default label.
4784
4785 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4786
4787         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4788         (low_sign_extend): Likewise.
4789         (get_field): Delete unused function.
4790         (set_field, deposit_14, deposit_21): Likewise.
4791
4792 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4793
4794         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
4795           (guy@netapp.com).
4796
4797 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
4798
4799         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
4800
4801         * alpha-opc.h (OSF_ASMCODE): define
4802         print pal-code names as defined in App C of the
4803         Alpha Architecture Reference Manual
4804
4805         * alpha-dis.c: cleaned up output
4806         print stylized code forms as defined in App A.4.3 of the
4807         Alpha Architecture Reference Manual
4808
4809 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
4810
4811         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
4812         `rfe'.
4813         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4814         'N', and 'M'.
4815
4816 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4817
4818         * m68k-dis.c (opcode): New function.  Returns address of opcode
4819         table entry given index, even if the opcode table was split to
4820         work around gcc bugs.
4821         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4822         directly.
4823         (BREAK_UP_BIG_DECL): Make secondary array static and const.
4824         (reg_names): Now const.
4825         (print_insn_arg): Arrays cacheFieldName and names now const.
4826         (print_indexed): Array scales now const.
4827
4828 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
4829
4830         * ppc-opc.c: Sort recently added instructions by minor opcode
4831         number within major opcode number.
4832
4833 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
4834
4835         * hppa-dis.c: Include libhppa.h.
4836
4837 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4838
4839         * mips-opc.c: Change dli to use M_DLI, and add dla.
4840
4841 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4842
4843         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
4844
4845 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
4846
4847         * mips-opc.c: Add r4650 mul instruction.
4848
4849 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
4850
4851         * mips-opc.c: Add uld and usd macros for unaligned double load and
4852         store.
4853
4854 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4855
4856         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4857         mfdcr, mtdcr, icbt, iccci.
4858
4859 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
4860
4861         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4862         signed char fields to shorts, more portable.
4863
4864 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
4865
4866         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4867         char fields as signed chars, since they may have negative values.
4868
4869 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4870
4871         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4872           (mycroft@netbsd.org).
4873
4874 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
4875
4876         From "Logg, Ed" <elogg@ea.com>:
4877         * ppc-opc.c (extract_bdm): Correct parenthezisation.
4878         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4879         value.
4880
4881 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
4882
4883         * ppc-opc.c: Changes based on patch from David Edelsohn
4884         <edelsohn@mhpcc.edu>.
4885         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4886         SPR.
4887         (FXM_MASK): Define.
4888         (insert_tbr): New static function.
4889         (extract_tbr): New static function.
4890         (XFXFXM_MASK, XFXM): Define.
4891         (XSPRBAT_MASK, XSPRG_MASK): Define.
4892         (powerpc_opcodes): Add instructions to access special registers by
4893         name.  Add mtcr and mftbu.
4894
4895 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4896
4897         * mips-opc.c (P3): Define.
4898         (mips_opcodes): Add mad and madu.
4899
4900 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
4901
4902         * configure.in: Add W65 support.
4903         * disassemble.c: Likewise.
4904         * w65-opc.h, w65-dis.c: New files.
4905
4906 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4907
4908         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4909         immediates.
4910
4911 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4912
4913         * mips-opc.c: Add dli as a synonym for li.
4914
4915 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4916
4917         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4918         print something for reserved opcode values, even if it won't
4919         assemble again.
4920
4921         * mips-dis.c (_print_insn_mips): When initializing, shift right
4922         and mask, to avoid sign extension problems on the Alpha.
4923
4924         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4925         control registers.
4926
4927 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4928
4929         * sh-opc.h (mov.l gbr): Get direction right.
4930         * sh-dis.c (print_insn_shx): New function.
4931         (print_insn_shl, print_insn_sh): Call print_insn_shx to
4932         print opcodes with right byte order.
4933
4934 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4935
4936         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4937         to avoid conflicts with getopt.
4938
4939 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4940
4941         * hppa-dis.c (print_insn_hppa): Read the instruction using
4942         bfd_getb32, so that it works on a little endian or 64 bit host.
4943         Remove unused local variable op.
4944
4945 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4946
4947         * mips-opc.c: Use or instead of addu for pseudo-op move, since
4948         addu does not work correctly if -mips3.
4949
4950 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4951
4952         * a29k-dis.c (print_special): Add special register names defined
4953         on 29030, 29040 and 29050.
4954         (print_insn): Handle new operand type 'I'.
4955
4956 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4957
4958         * Makefile.in (INSTALL): Use top level install.sh script.
4959
4960 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4961
4962         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4963         that it works on a little endian host.
4964
4965 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4966
4967         * configure.in: Use ${config_shell} when running config.bfd.
4968
4969 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4970
4971         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4972
4973 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4974
4975         * a29k-dis.c (print_insn): Print the opcode.
4976
4977 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4978
4979         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4980
4981 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
4982
4983         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4984
4985 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4986
4987         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4988         which store a value into memory.
4989
4990 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4991
4992         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4993         * arm-dis.c, arm-opc.h: New files.
4994
4995 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
4996
4997         * Makefile.in (ns32k-dis.o): Add dependency.
4998         * ns32k-dis.c (print_insn_arg): Declare initialized local as
4999         string, not as array of chars.
5000
5001 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
5002
5003         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
5004
5005         * sparc-opc.c: Added sparclite extended FP operations, and
5006         versions of v9 impdep* instructions permitting specification of
5007         the OPF field.
5008
5009 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
5010
5011         * i960-dis.c (reg_names): Now const.
5012         (struct sparse_tabent): New type, copied from array type in mem
5013         function.
5014         (ctrl): Local static array ctrl_tab now const.
5015         (cobr): Local static array cobr_tab now const.
5016         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
5017         static variable mem_tab no longer explicitly initialized.  Changed
5018         mem_init to const array of struct sparse_tabent.
5019         (reg): Local static variable reg_tab no longer explicitly
5020         initialized.  Changed reg_init to const array of struct
5021         sparse_tabent.
5022         (ea): Local static array scale_tab now const.
5023
5024         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
5025         (REG_MAX): Updated.
5026
5027 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
5028
5029         * configure.bat: the disassember needs to be enabled for
5030         "objdump -d" to work in djgpp.
5031
5032 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
5033
5034         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
5035         (invalid_float): Enabled general version, doesn't require running
5036         on ns32k host.  Changed to take char* argument, and test for
5037         explicitly specified sizes, instead of using sizeof() on host CPU
5038         types.
5039         (INVALID_FLOAT): Cast first argument.
5040         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
5041         list_P032, list_M032): Now const.
5042         (optlist, list_search): Made appropriate arguments now point to
5043         const.
5044         (print_insn_arg): Changed static array of one-character-string
5045         pointers into a static const array of characters; fixed sprintf
5046         statement accordingly.
5047
5048 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
5049
5050         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
5051         from distribution. A ns32k-dis.c from a previous distribution has
5052         been brought up to date and supports the new interface.
5053
5054         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
5055
5056         * configure.in: add bfd_ns32k_arch target support.
5057
5058         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
5059         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
5060
5061 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
5062
5063         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
5064         disassembly right.
5065
5066 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
5067
5068         * h8300-dis.c, mips-dis.c: Don't use true and false.
5069
5070 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
5071
5072         * configure.in: Change --with-targets to --enable-targets.
5073
5074 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
5075
5076         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5077         opcodes to the first instruction with that opcode, to speed
5078         disassembly of large files.  From ralphc@pyramid.com (Ralph
5079         Campbell).
5080
5081 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5082
5083         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5084
5085 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
5086
5087         * configure.bat: update to latest makefile.in
5088
5089 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
5090
5091         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5092         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5093         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5094         slot insn is in a delay slot.
5095         * z8k-opc.h: (resflg): Fix patterns.
5096         * h8500-opc.h Fix CR insn patterns.
5097
5098 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5099
5100         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5101         "cmpl" before POWER versions, so that gas -many uses them.
5102
5103 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
5104
5105         * disassemble.c: New file.
5106         * Makefile.in (OFILES): Add disassemble.o.
5107         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5108         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
5109         binutils/configure.in.
5110
5111         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5112         opcode being examined.
5113
5114 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5115
5116         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5117         (insert_ral, insert_ram, insert_ras): New functions.
5118         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5119         RAS for store with update.
5120
5121 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5122
5123         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
5124         (edelsohn@npac.syr.edu).
5125
5126 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5127
5128         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5129         immediate argument.
5130
5131 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
5132
5133         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5134
5135 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5136
5137         * ppc-opc.c (powerpc_operands): The signedp field has been
5138         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
5139         instead.  Add new operand SISIGNOPT.
5140         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5141         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5142         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5143         than signedp field.
5144
5145 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5146
5147         * i386-dis.c (struct private):  Renamed to dis_private. `private'
5148         is a reserved word for dynix cc.
5149
5150 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5151
5152         * configure.in: Change error message to refer to bfd/config.bfd
5153         rather than bfd/configure.in.
5154
5155 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
5156
5157         * ppc-opc.c: Define POWER2 as short alias flag.
5158         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5159         fsqrt.
5160
5161 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5162
5163         * i960-dis.c (print_insn_i960): Don't read a second word for
5164         opcodes 0, 1, 2 and 3.
5165
5166 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5167
5168         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5169
5170 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5171
5172         * m68881-ext.c: Removed; no longer used.
5173         * Makefile.in: Changed accordingly.
5174
5175         * m68k-dis.c (ext_format_68881): Don't declare.
5176         (print_insn_m68k): If an instruction uses place 'i', it uses at
5177         least four fixed bytes.
5178         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
5179         extended float, convert to double using floatformat_to_double, not
5180         ieee_extended_to_double, and fetch the data before converting it.
5181
5182 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5183
5184         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
5185         davidj@ICSI.Berkeley.EDU (David Johnson).
5186
5187 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5188
5189         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5190         PowerPC uses bdnz[l][a].
5191
5192 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5193
5194         * dis-buf.c, i386-dis.c:  Include sysdep.h.
5195
5196 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5197
5198         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5199
5200         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5201         by Motorola PowerPC 601 with PPC_OPCODE_601.
5202         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5203         Disassemble Motorola PowerPC 601 instructions as well as normal
5204         PowerPC instructions.
5205
5206 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
5207
5208         * i960-dis.c (reg, mem): Just use a static array instead of
5209         calling xmalloc.
5210
5211 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
5212
5213         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5214         condition name index if this is for a negated condition.
5215
5216         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5217         Floating point format for 'H' operand is backwards from normal
5218         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
5219         operands (fmpyadd and fmpysub), handle bizarre register
5220         translation correctly for single precision format.
5221
5222         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5223         or 'I' operands if the next format specifier is 'M' (fcmp
5224         condition completer).
5225
5226 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5227
5228         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5229         single number giving a bitmask for the MB and ME fields of an M
5230         form instruction.  Change NB to accept 32, and turn it into 0;
5231         also turn 0 into 32 when disassembling.  Seperated SH from NB.
5232         (insert_mbe, extract_mbe): New functions.
5233         (insert_nb, extract_nb): New functions.
5234         (SC_MASK): Mask out SA and LK bits.
5235         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5236         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
5237         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
5238         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5239         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5240         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
5241         (powerpc_macros): Define table of macro definitions.
5242         (powerpc_num_macros): Define.
5243
5244         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5245         if PPC_OPERAND_NEXT is set.
5246
5247 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5248
5249         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5250         char.  Retrieve contents using bfd_getl32 instead of shifting.
5251
5252 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5253
5254         * ppc-opc.c: New file.  Opcode table for PowerPC, including
5255         opcodes for POWER (RS/6000).
5256         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
5257         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5258         (CFILES): Add ppc-dis.c.
5259         (ppc-dis.o, ppc-opc.o): New targets.
5260         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5261
5262 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
5263
5264         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5265         No space before 'u', 'f', or 'N'.
5266
5267 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
5268
5269         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5270         farther than we should.
5271
5272         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5273
5274 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
5275
5276         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5277
5278 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
5279
5280         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5281         needs it, to prevent reading past the end of a section.
5282
5283 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5284
5285         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5286         Removed t,A case for la; always use t,A(b) case.
5287
5288 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5289
5290         From Ted Lemen <mellon@pepper.ncd.com>
5291         * mips-dis.c (print_insn_arg): Handle 'k'.
5292         * mips-opc.c: Make cache use k, not t.
5293
5294 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5295
5296         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
5297         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5298         FLOAT_FORMAT_CODE to put out floating point register names.
5299
5300 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5301
5302         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5303
5304 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5305
5306         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5307
5308 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5309
5310         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5311         larger than 32.  Moved dsxx32 variants first for disassembler.
5312
5313 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5314
5315         * z8kgen.c, z8k-opc.h: Add full lda information.
5316
5317 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
5318
5319         * hppa-dis.c (print_insn_hppa): Do not emit a space after
5320         movb instructions.  Any necessary space will be emitted by
5321         the code to handle nullification completers.
5322
5323 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5324
5325         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5326
5327 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5328
5329         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
5330         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
5331
5332 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5333
5334         * mips-opc.c: Correct lwu opcode value (book had it wrong).
5335
5336 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5337
5338         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5339         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5340
5341 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
5342
5343         * m88k-dis.c (m88kdis): comment change.  Remove space after
5344           printing mnemonic.
5345           (printop): handle new arg types DEC and XREG for m88110.
5346
5347 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
5348
5349         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5350         type for absolute branch addresses.  Delete special
5351         "ble" and "be" code in 'W' operand code.
5352
5353 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5354
5355         * mips-opc.c: Set hazard information correctly for branch
5356         likely instructions.
5357
5358 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5359
5360         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
5361         info->fprintf_func for printing and info->print_address_func for
5362         address output.
5363
5364 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5365
5366         * mips-opc.c: Set INSN_TRAP for tXX instructions.
5367
5368 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5369
5370         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5371         Corrected second case of "b" for disassembler.
5372
5373 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5374
5375         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
5376         to BFD swapping routines to correspond to BFD name changes.
5377
5378 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5379
5380         * mips-opc.c: Change div machine instruction to be z,s,t rather
5381         than s,t.  Change div macro to be d,v,t rather than d,s,t.
5382         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
5383         rem and remu which generates only the corresponding div
5384         instruction.  This is for compatibility with the MIPS assembler,
5385         which only generates the simple machine instruction when an
5386         explicit destination of $0 is used.
5387         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5388
5389 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5390
5391         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5392         WR_31 hazard for bal, bgezal, bltzal.
5393
5394 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5395
5396         * hppa-dis.c (print_insn_hppa): Use print function
5397         from within the disassemble_info, not fprintf_filtered.
5398
5399 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5400
5401         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
5402         Law, law@cs.utah.edu.)
5403
5404 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5405
5406         * mips-opc.c ("absu"): Removed.
5407         ("dabs"): Added.
5408
5409 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5410
5411         * mips-opc.c: Added r6000 and r4000 instructions and macros.
5412         Changed hazard information to distinguish between memory load
5413         delays and coprocessor load delays.
5414
5415 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5416
5417         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
5418
5419 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
5420
5421         * configure.in: Don't pass cpu to config.bfd.
5422
5423 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5424
5425         * m88k-dis.c (m88kdis): Make class unsigned.
5426
5427 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
5428
5429         * alpha-dis.c (print_insn_alpha): One branch format case was
5430         missing the instruction name.
5431
5432 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
5433
5434         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5435         Add the arch-specific auxiliary files.
5436         (OFILES): Remove the arch-specific auxiliary files
5437         and use BFD_MACHINES instead of DIS_LIBS.
5438         * configure.in: Set BFD_MACHINES based on --with-targets option.
5439
5440 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5441
5442         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
5443         for swc1.
5444
5445 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5446
5447         * sparc-opc.c: Change CONST to const to deal with gcc
5448         -Dconst=__const -traditional.
5449
5450 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5451
5452         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5453         coprocessor instructions out of #if 0, and made them use new
5454         argument type "C".
5455
5456 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5457
5458         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5459
5460 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
5461
5462         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5463         instruction, for use by the disassembler.
5464
5465         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
5466         hand-coded sign extensions that depended on 32-bit host ints.
5467         FIXME, we still depend on big-endian host bitfield ordering.
5468         (sparc_print_insn):  Set the insn_info_valid field, and the
5469         other fields that describe the instruction being printed.
5470
5471 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
5472
5473         * sparc-opc.c (call): Accept all 6 addressing modes valid for
5474         `jmp' instead of just one of them.
5475
5476 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
5477
5478         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5479         (fput_fp_reg_r): Renamed from fput_reg_r.
5480         (fput_fp_reg): New function.
5481         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5482
5483         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5484
5485         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5486
5487 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
5488
5489         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5490
5491         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5492         don't output a space.
5493
5494         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5495
5496 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
5497
5498         * mips-opc.c: New file, containing opcode table from
5499         ../include/opcode/mips.h.
5500         * Makefile.in: Add it.
5501
5502 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5503
5504         * m88k-dis.c: New file, moved in from gdb and changed to use the
5505         new dis-asm.h disassembler interface.
5506         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5507         (m88k-dis.o): New target.
5508
5509 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
5510
5511         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5512         argument string const char * to correspond to opcode/mips.h.
5513
5514 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
5515
5516         * mips-dis.c: Updated to account for name changes in new version
5517         of opcode/mips.h.
5518         * Makefile.in: Added header file dependencies.
5519
5520 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
5521
5522         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5523
5524 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5525
5526         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5527         extend, rather than shifts.
5528
5529 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
5530
5531         * Makefile.in: Undo 15 June change.
5532
5533 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
5534
5535         * m68k-dis.c (print_insn_arg):  Change return value to byte count
5536         or error code.
5537         * m68k-dis.c:  Re-write to detect invalid operands before
5538         printing anything, so we can handle this the same way we
5539         handle invalid opcodes.
5540
5541 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5542
5543         * sh-dis.c, sh-opc.h: Understand some more opcodes.
5544
5545 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
5546
5547         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5548         header files.
5549
5550 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5551
5552         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5553
5554         * configure.in: Do make sysdep.h link.
5555         * Makefile.in: Search ../include.  Don't search ../bfd.
5556
5557 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
5558
5559         Changes from Jeff Law, law@cs.utah.edu:
5560         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
5561         Do not print a space before the completers specified by
5562         'a' and 'd'.
5563
5564 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
5565
5566         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5567         defined, since gdb has been fixed.
5568
5569         Changes from Jeff Law, law@cs.utah.edu:
5570         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5571         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5572         be a *disassemble_info, not a *FILE.
5573         * hppa-dis.c: Support 'd', '!', and 'a'.
5574         * hppa-dis.c: Support 's' to extract a 2 bit space register.
5575         * hppa-dis.c: Delete cases which are no longer needed.
5576
5577 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
5578
5579         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5580
5581 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5582
5583         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5584         H8/300-H opcodes.
5585
5586 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
5587
5588         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5589         * configure.in:  No longer need to configure to get sysdep.h.
5590
5591 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
5592
5593         * Patches from Jeffrey Law <law@cs.utah.edu>.
5594         * hppa-dis.c: Support 'I', 'J', and 'K' in output
5595         templates for 1.1 FP computational instructions.
5596
5597 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5598
5599         * h8500-dis.c (print_insn_h8500): Address argument is type
5600         bfd_vma.
5601         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5602         Ditto.
5603
5604         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5605         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5606
5607         * sparc-dis.c (compare_opcodes): Move static declaration to
5608         top-level.
5609
5610 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5611
5612         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5613         instruction, remove unimp hack from 'l' argument.
5614
5615 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
5616
5617         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
5618         happy.
5619
5620 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
5621
5622         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5623         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5624         instructions.
5625
5626 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5627
5628         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
5629         arrays of string pointers to 2-d arrays of chars, to save
5630         space.
5631
5632 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
5633
5634         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5635         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5636
5637 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5638
5639         * hppa-dis.c: New file from Utah, adapted to new disassembler
5640         calling interface.
5641         * Makefile.in: Include it.
5642
5643 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5644
5645         * sh-dis.c, sh-opc.h: New files.
5646
5647 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5648
5649         * alpha-dis.c, alpha-opc.h: New files.
5650
5651 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5652
5653         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5654         value.
5655
5656 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
5657
5658         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5659
5660 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
5661
5662         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5663         const.
5664
5665 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
5666
5667         * sparc-dis.c: Use fprintf_func a few places where I forgot,
5668         and double percent signs a few places.
5669
5670         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5671
5672         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5673         Use info->print_address_func not print_address.
5674
5675         * dis-buf.c (generic_print_address): New function.
5676
5677 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5678
5679         * Makefile.in: Add sparc-dis.c.
5680         sparc-dis.c: New file, merges binutils and gdb versions as follows:
5681         From GDB:
5682             Add `add' instruction to the set that get checked
5683             for a preceding `sethi' in order to print an absolute address.
5684             * (print_insn):  Disassembly prefers real instructions.
5685             (is_delayed_branch):  Speed up.
5686             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
5687             Still missing some float ops, and needs testing.
5688             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5689             F_ALIAS.  Use printf, not fprintf, when not passing a file
5690             pointer...
5691             (compare_opcodes): Check that identical instructions have
5692             identical opcodes, complain otherwise.
5693         From binutils:
5694             * New 'm' arg.
5695             * Include reg_names.
5696         From neither:
5697             Use dis-asm.h/read_memory_func interface.
5698
5699 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
5700
5701         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5702           deliberately return non-zero to setjmp from longjmp.  Otherwise
5703           this code fails to compile.
5704
5705 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
5706
5707         * m68k-dis.c:  Fix prototype for fetch_arg().
5708
5709 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5710
5711         * dis-buf.c: New file, for new read_memory_func interface.
5712         Makefile.in (OFILES): Include it.
5713         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5714         Use new read_memory_func interface.
5715
5716 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5717
5718         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5719         * h8500-opc.h: Fix couple of opcodes.
5720
5721 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
5722
5723         * Makefile.in: add dvi & installcheck targets
5724
5725 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
5726
5727         * Makefile.in:  Update for h8500-dis.c.
5728
5729 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5730
5731         * h8500-dis.c, h8500-opc.h: New files
5732
5733 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
5734
5735         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
5736         ../include/dis-asm.h.
5737         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
5738         and ../gdb/m68k-pinsn.c).
5739         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
5740         and ../gdb/i386-pinsn.c).
5741         * m68881-ext.c:  New file.  Moved definition of
5742         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5743         * Makefile.in:  Adjust for new files.
5744         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
5745         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
5746         can be dis-assembled.
5747
5748 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5749
5750         * mips-dis.c (print_insn_arg): Now returns void.
5751
5752 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
5753
5754         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
5755         files that use the macros.
5756
5757 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5758
5759         * mips-dis.c: New file, from gdb/mips-pinsn.c.
5760         * Makefile.in (DIS_LIBS): Added mips-dis.o.
5761         (CFILES): Added mips-dis.c.
5762
5763 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5764
5765         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5766         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5767
5768 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
5769
5770         * Makefile.in:  Improve *clean rules.
5771         * configure.in:  Allow a default host.
5772
5773 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5774
5775         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5776         files include other sysdep files
5777
5778 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5779
5780         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5781
5782 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
5783
5784         * configure.in:  For host support, use ../bfd/configure.host
5785         so it stays in sync with the ../bfd/hosts database.
5786
5787 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5788
5789         * configure.in: use cpu-vendor-os triple instead of nested cases
5790
5791 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
5792
5793         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5794         *always* the wrong one.
5795
5796 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5797
5798         * z8kgen.c: added copyright info
5799
5800 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5801
5802         * z8k-dis.c (unparse_instr): prettier tabs
5803         * z8kgen.c -> z8k-opc.h: bug fixes in tables
5804
5805 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
5806
5807         * configure.in:  Add ncr* configuration.
5808         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
5809         picayune ANSI compilers happy.
5810
5811 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
5812
5813         * configure.in (i386):  Make i386 and i486 synonymous for now.
5814         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
5815
5816 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5817
5818         * Makefile.in (install): Fix typo.
5819
5820 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
5821
5822         * Makefile.in (make):  Remove obsolete crud.
5823         (sparc-opc.o):  Avoid Sun Make VPATH bug.
5824
5825 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
5826
5827         * Makefile.in: since there are no SUBDIRS, remove rule and
5828         references of subdir_do.
5829
5830 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5831
5832         * Makefile.in (install): Get the library name right here too.
5833         Don't install bfd.h, since it's unrelated to this library.  No
5834         subdirs to recurse into, either.
5835         (CFILES): The source file has a .c suffix, not .o.
5836
5837         * sparc-opc.c: New file, moved from BFD.
5838         * Makefile.in (OFILES): Build it.
5839
5840 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
5841
5842         * z8k-dis.c: fixed forward refferences of some declarations.
5843
5844 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
5845
5846         * Makefile.in: get the name of the library right
5847
5848 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5849
5850         * z8k-dis.c: knows how to disassemble z8k stuff
5851         * z8k-opc.h: new file full of z8000 opcodes
5852
5853 \f
5854 Local Variables:
5855 version-control: never
5856 End: