opcodes/ChangeLog

   1 start-sanitize-r5900
   2 Mon Jun  1 10:27:26 1998  Jeffrey A Law  (law@cygnus.com)
   3
   4         * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
   5         (sqrt.s): Likewise.
   6
   7 end-sanitize-r5900
   8 start-sanitize-vr5400
   9 Thu May 28 08:46:09 1998  Catherine Moore <clm@cygnus.com>
  10
  11        * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
  12        Change pinfo to use WR_HILO.
  13
  14 end-sanitize-vr5400
  15 start-sanitize-d30v
  16 Wed May 27 15:29:13 1998  Nick Clifton  <nickc@cygnus.com>
  17
  18         * d30v-opc.c: Add new operand: Ra3.  Change SHORT_B3, SHORT_B3b,
  19         LONG_2, LONG_2b formats to use this new operand.
  20
  21 end-sanitize-d30v
  22 Tue May 26 20:47:48 1998  Stan Cox  <scox@cygnus.com>
  23
  24         * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
  25
  26 Tue May 26 20:45:33 1998  Mark Alexander  <marka@cygnus.com>
  27
  28         * sparc-dis.c (print_insn_sparc): big endian instruction / little
  29         endian data support.
  30
  31 start-sanitize-d30v
  32 Tue May 26 16:14:39 1998  Nick Clifton  <nickc@cygnus.com>
  33
  34         * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
  35         and SHORT_B3b formats to use Rb instead of Ra.
  36
  37         Add FLAG_MUL16 to MUL2XH opcode.
  38
  39         Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
  40         to existing 1.1.1 parallelisation prohibition procedure.
  41
  42 end-sanitize-d30v
  43 Fri May 22 16:00:00 1998  Doug Evans  <devans@canuck.cygnus.com>
  44
  45         * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
  46         * cgen-dis.in (extract_normal): Likewise.
  47         * m32r-asm.c,m32r-dis.c: Regenerate.
  48
  49 start-sanitize-sky
  50 Fri May 22 11:44:10 1998  Doug Evans  <devans@canuck.cygnus.com>
  51
  52         * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
  53
  54 end-sanitize-sky
  55 start-sanitize-r5900
  56 Wed May 20 00:22:27 1998  Jeffrey A Law  (law@cygnus.com)
  57
  58         * mips-opc.c (multu1): Add two operand variant for the r5900.
  59
  60 end-sanitize-r5900
  61 Tue May 19 17:36:08 1998  Ian Lance Taylor  <ian@cygnus.com>
  62
  63         * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
  64         with a shift count of 0.
  65
  66 start-sanitize-r5900
  67 Mon May 18 14:27:06 1998  Frank Ch. Eigler  <fche@cygnus.com>
  68
  69         * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
  70
  71 Mon May 18 11:44:00 1998  Jeffrey A Law  (law@cygnus.com)
  72
  73         * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
  74         (_print_insn_mips): Likewise.
  75         * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
  76         completers.
  77
  78 end-sanitize-r5900
  79 Fri May 15 14:58:31 1998  Doug Evans  <devans@seba.cygnus.com>
  80
  81         * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
  82         (cgen_hw_lookup_by_num): New function.
  83
  84 start-sanitize-m32rx
  85         * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
  86
  87 end-sanitize-m32rx
  88 Wed May 13 17:03:59 1998  Doug Evans  <devans@canuck.cygnus.com>
  89
  90         * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
  91
  92 Wed May 13 14:34:31 1998  Mark Alexander  <marka@cygnus.com>
  93
  94         * sparc-dis.c (print_insn_sparc): Always fetch instructions
  95         as big-endian on SPARClite.
  96
  97 start-sanitize-m32rx
  98 Tue May 12 13:39:51 1998  Nick Clifton  <nickc@cygnus.com>
  99
 100         * m32r-opc.c: Regenerated - SPECIAL attribute added to some
 101         insns.
 102         * m32r-opc.h: Regenerated - SPECIAL attribute added to some
 103         insns.
 104
 105 end-sanitize-m32rx
 106 start-sanitize-d30v
 107 Tue May 12 11:46:31 1998  Richard Henderson  <rth@cygnus.com>
 108
 109         * d30v-opc.c (pre_defined_register): Remove alias for r0.
 110
 111 end-sanitize-d30v
 112 start-sanitize-r5900
 113 Mon May 11 13:12:15 1998  Frank Ch. Eigler  <fche@cygnus.com>
 114
 115         * mips-opc.c (break): Added 20-bit single-operand break
 116         instruction for R5900 only.
 117
 118 end-sanitize-r5900
 119 Sun May 10 22:37:22 1998  Jeffrey A Law  (law@cygnus.com)
 120
 121         * po/Make-in (install-info): New target.
 122
 123 Thu May  7 17:15:59 1998  Ian Lance Taylor  <ian@cygnus.com>
 124
 125         * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
 126         * configure: Rebuild.
 127
 128 Thu May  7 12:49:46 1998  Frank Ch. Eigler  <fche@cygnus.com>
 129
 130         * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
 131         variety of ISA2 instructions to set bottom ten bits of trap code.
 132
 133 Thu May  7 11:54:25 1998  Ian Lance Taylor  <ian@cygnus.com>
 134
 135         * Makefile.am (config.status): Add explicit target so that
 136         config.status depends upon bfd/configure.in.
 137         * Makefile.in: Rebuild.
 138
 139 Thu May  7 09:33:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
 140
 141         * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
 142         instructions to set bottom ten bits of break code.
 143         * mips-dis.c (print_insn_arg): Implement 'q' operand format used
 144         for above optional argument.
 145
 146 start-sanitize-cygnus
 147 Wed May  6 14:47:17 1998  Doug Evans  <devans@seba.cygnus.com>
 148
 149         * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
 150         * m32r-opc.h: Regenerate.
 151
 152 end-sanitize-cygnus
 153 Wed May  6 15:30:06 1998  Klaus Kaempf  <kkaempf@progis.de>
 154
 155         * makefile.vms: Run dec c with /nodebug.
 156
 157 Mon May  4 10:19:57 1998  Tom Tromey  <tromey@cygnus.com>
 158
 159         * Makefile.in: Rebuilt.
 160         * Makefile.am: Regenerated dependencies with mkdep.
 161
 162         * opintl.h (_): Define as dgettext.
 163
 164 start-sanitize-cygnus
 165 Fri May  1 13:47:42 1998  Doug Evans  <devans@canuck.cygnus.com>
 166
 167         * configure.in: Add support for --enable-cgen-maint.
 168         * Makefile.am (M32R_DEPS): New variable.
 169         (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
 170         * aclocal.m4: Regenerate.
 171         * Makefile.in: Regenerate.
 172         * configure: Regenerate.
 173
 174         * Makefile.am (CGENFILES): Add minsn.scm.
 175
 176 end-sanitize-cygnus
 177 Tue Apr 28 14:12:12 1998  Nick Clifton  <nickc@cygnus.com>
 178
 179         * cgen-asm.c: Internationalised.
 180 start-sanitize-cygnus
 181         * cgen-asm.in: Internationalised.
 182         * cgen-opc.in: Internationalised.
 183 end-sanitize-cygnus
 184         * m32r-asm.c: Internationalised.
 185         * m32r-dis.c: Internationalised.
 186         * m32r-opc.c: Internationalised.
 187
 188         * aclocal.m4: Regenerated.
 189         * configure: Regenerated.
 190         * Makefile.am (POTFILES): Remove inclusion of BFD_H.
 191         * Makefile.in: Rebuild.
 192         * po/POTFILES.in: Rebuilt using rule in Makefile.in.
 193         * po/opcodes.pot: Rebuilt after changing POTFILES.in.
 194
 195 Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>
 196
 197         * configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
 198         after AC_PROG_CC.
 199         * aclocal.m4, configure: Rebuild with current tools.
 200
 201 Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
 202
 203         * opintl.h: New file - contains internationalisation macros used
 204         by source files in this directory.
 205         * po/: New subdirectory - contains internationalisation files.
 206         * po/Make-in: New file - Makefile constructor.
 207         * po/POTFILES.in: New file - list of files in opcodes directory
 208         that should be scan for internationalisation macros.
 209         * po/opcodes.pot: New file - list of internationisation strings
 210         found in files mentioned in po/POTFILES.in.
 211         * Makefile.am: Add rule to build po/POTFILES.in.  Add SUBDIRS
 212         entry.  Add intl directory to include paths.
 213         * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
 214         HAVE_STRCPY, HAVE_LC_MESSAGES
 215         * configure.in: Add rule to build Makefile in po subdirectory.
 216         * Makefile.in: Rebuilt.
 217         * aclocal.m4: Rebuilt.
 218         * config.in: Rebuilt.
 219         * configure: Rebuilt.
 220         * alpha-opc.c: Internationalised.
 221         * arc-dis.c: Internationalised.
 222         * arc-opc.c: Internationalised.
 223         * arm-dis.c: Internationalised.
 224         * cgen-asm.c: Internationalised.
 225 start-sanitize-d30v
 226         * d30v-dis.c: Internationalised.
 227 end-sanitize-d30v
 228         * dis-buf.c: Internationalised.
 229 start-sanitize-sky
 230         * dvp-dis.c: Internationalised.
 231         * dvp-opc.c: Internationalised.
 232 end-sanitize-sky
 233         * h8300-dis.c: Internationalised.
 234         * h8500-dis.c: Internationalised.
 235         * i386-dis.c: Internationalised.
 236         * m10200-dis.c: Internationalised.
 237         * m10300-dis.c: Internationalised.
 238         * m68k-dis.c: Internationalised.
 239         * m88k-dis.c: Internationalised.
 240         * mips-dis.c: Internationalised.
 241         * ns32k-dis.c: Internationalised.
 242         * opintl.h: Internationalised.
 243         * ppc-opc.c: Internationalised.
 244         * sparc-dis.c: Internationalised.
 245         * v850-dis.c: Internationalised.
 246         * v850-opc.c: Internationalised.
 247
 248 Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>
 249
 250         * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
 251         (asm_hash_table_entries): New variable.
 252         (cgen_asm_init): Free asm_hash_table_entries.
 253         (hash_insn_array,hash_insn_list): New functions.
 254         (build_asm_hash_table): Use them.  Hash macro insns as well.
 255         (cgen_asm_lookup_insn): Update.
 256         * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
 257         (dis_hash_table_entries): New variable.
 258         (cgen_dis_init): Free dis_hash_table_entries.
 259         (hash_insn_array,hash_insn_list): New functions.
 260         (build_dis_hash_table): Use them.  Hash macro insns as well.
 261         (cgen_dis_lookup_insn): Update.
 262         * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
 263         (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
 264         (cgen_macro_insn_count): New function.
 265         * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
 266         All callers updated.  Sanity check result of extract fn.
 267         (@arch@_cgen_get_insn_operands): Change result type to void.
 268         Delete args insn_value, length.  New arg fields.  All callers updated.
 269         (@arch@_cgen_lookup_get_insn_operands): New function.
 270         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 271
 272 Fri Apr 24 16:07:57 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 273
 274         * i386-dis.c (OP_DSSI): Print segment override.
 275
 276 start-sanitize-r5900
 277 Thu Apr 23 12:32:07 1998  Frank Ch. Eigler  <fche@cygnus.com>
 278
 279         * mips-opc.c (msub.s): Correct mask pattern for disassembly.
 280
 281 end-sanitize-r5900
 282 start-sanitize-r5900
 283 Mon Apr 20 19:11:55 1998  Frank Ch. Eigler  <fche@cygnus.com>
 284
 285         * mips-opc.c (madd.s): Correct mask pattern for disassembly.
 286
 287 end-sanitize-r5900
 288 start-sanitize-r5900
 289 Sat Apr 18 00:29:18 1998  Jeffrey A Law  (law@cygnus.com)
 290
 291         * vu0.h (vlqd, vlqi): Update per revised specs.
 292
 293 end-sanitize-r5900
 294 start-sanitize-sky
 295 Thu Apr 16 11:44:59 1998  Doug Evans  <devans@canuck.cygnus.com>
 296
 297         * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
 298         (vif_operands): Update.
 299         (vif_get_unpackloc): Delete.
 300         (state_vif_unpackloc{,_star_p}): Delete.
 301         (dvp_opcode_init_parse): Update.
 302         (vif_unpack_len_value): Avoid divide by zero.
 303
 304 end-sanitize-sky
 305 start-sanitize-r5900
 306 Wed Apr 15 10:30:07 1998   Frank Ch. Eigler  <fche@cygnus.com>
 307
 308         * vu0.h: Specs changed for VCALLMSR bit pattern.
 309         * mips-dis.c: (print_insn_arg) Matching change.
 310
 311 end-sanitize-r5900
 312 Mon Apr 13 16:59:39 1998  Nick Clifton  <nickc@cygnus.com>
 313
 314         * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
 315         operator.
 316
 317 Mon Apr 13 16:50:27 1998  Ian Lance Taylor  <ian@cygnus.com>
 318
 319         * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
 320         (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
 321         * configure.in: Define and substitute WIN32LDFLAGS and
 322         WIN32LIBADD.
 323         * aclocal.m4: Rebuild with new libtool.
 324         * configure, Makefile.in: Rebuild.
 325
 326 start-sanitize-r5900
 327 Mon Apr 13 16:02:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
 328
 329         * vu0.h: Corrected bit pattern for VMAXI opcode.
 330
 331 end-sanitize-r5900
 332 Fri Apr 10 18:14:31 1998  Doug Evans  <devans@canuck.cygnus.com>
 333
 334         * m32r-opc.c: Regenerate.
 335
 336 start-sanitize-sky
 337 Mon Apr  6 17:16:48 1998  Doug Evans  <devans@canuck.cygnus.com>
 338
 339         * dvp-opc.c (vif_macros): Tweak unpackloc operand.
 340         (dvp_expand_macro): Implement.
 341         (insert_vif_datalen): Record value with max+1 -> 0 conversion.
 342         (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
 343
 344 end-sanitize-sky
 345 Sun Apr  5 16:04:39 1998  H.J. Lu  <hjl@gnu.org>
 346
 347         * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
 348         before trying to copy it.
 349         * Makefile.in: Rebuild.
 350
 351 Thu Apr  2 17:25:49 1998  Nick Clifton  <nickc@cygnus.com>
 352
 353         * m32r-opc.c: Use signed immediate values for CMPUI instruction.
 354
 355 start-sanitize-m32rx
 356 Thu Apr  2 16:44:23 1998  Nick Clifton  <nickc@cygnus.com>
 357
 358         * m32r-opc.c: Fix bit patterns for SAT and SATB.
 359
 360 end-sanitize-m32rx
 361 Wed Apr  1 16:20:27 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
 362
 363         * ns32k-dis.c (bit_extract_simple): New function to extract bits
 364         from an arbitrary valid buffer instead of fetching them on demand
 365         using fetch_data().
 366         (invalid_float): use bit_extract_simple() instead of bit_extract().
 367
 368 start-sanitize-m32rx
 369 Wed Apr  1 14:57:54 1998  Nick Clifton  <nickc@cygnus.com>
 370
 371         * m32r-opc.c: Fix SATB bit pattern.  Add extra control registers.
 372         * m32r-opc.h: Add extra control registers.
 373
 374 end-sanitize-m32rx
 375 Tue Mar 31 11:09:08 1998  Ian Lance Taylor  <ian@cygnus.com>
 376
 377         From H.J. Lu <hjl@gnu.org>:
 378         * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
 379         to Ev for both.
 380
 381 Mon Mar 30 17:32:03 1998  Ian Lance Taylor  <ian@cygnus.com>
 382
 383         * Branched binutils 2.9.
 384
 385 start-sanitize-d30v
 386 Mon Mar 30 15:18:00 1998  Ken Raeburn  <raeburn@cygnus.com>
 387
 388         * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
 389         disassembling last 4 bytes of a section.
 390
 391 end-sanitize-d30v
 392 Fri Mar 27 18:08:13 1998  Ian Lance Taylor  <ian@cygnus.com>
 393
 394         Fix some gcc -Wall warnings:
 395         * arc-dis.c (print_insn): Add casts to avoid warnings.
 396         * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
 397         * d10v-dis.c (dis_long, dis_2_short): Likewise.
 398 start-sanitize-sky
 399         * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
 400         (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
 401         (parse_bc, parse_vfreg, parse_accdest): Likewise.
 402         (parse_ffstreg, parse_vif_mode): Likewise.
 403 end-sanitize-sky
 404         * m10200-dis.c (disassemble): Likewise.
 405         * m10300-dis.c (disassemble): Likewise.
 406         * ns32k-dis.c (print_insn_ns32k): Likewise.
 407         * ppc-opc.c (insert_ral, insert_ram): Likewise.
 408         * cgen-dis.c (build_dis_hash_table): Remove used local variables.
 409         * cgen-opc.c (cgen_keyword_search_next): Likewise.
 410         * d10v-dis.c (dis_long, dis_2_short): Likewise.
 411 start-sanitize-d30v
 412         * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
 413 end-sanitize-d30v
 414 start-sanitize-sky
 415         * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
 416         * dvp-opc.c (parse_dest1, print_uflags): Likewise.
 417         (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
 418 end-sanitize-sky
 419         * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
 420 start-sanitize-tic80
 421         * tic80-dis.c (print_one_instruction): Likewise.
 422 end-sanitize-tic80
 423         * w65-dis.c (print_operand): Likewise.
 424         * z8k-dis.c (fetch_data): Likewise.
 425         * a29k-dis.c: Add return type for find_byte_func_type.
 426         * arc-opc.c: Include <stdio.h>.  Remove declarations of
 427         insert_multshift and extract_multshift.
 428 start-sanitize-d30v
 429         * d30v-dis.c (lookup_opcode): Parenthesize assignments in
 430         conditionals.
 431         (extract_value): Fully parenthesize expression.
 432 end-sanitize-d30v
 433 start-sanitize-sky
 434         * dvp-opc.c: Include <ctype.h>.
 435         (print_sdest): Add default case to switch.
 436 end-sanitize-sky
 437         * h8500-dis.c (print_insn_h8500): Initialize local variables.
 438         * h8500-opc.h (h8500_table): Fully bracket initializer.
 439         * w65-opc.h (optable): Likewise.
 440         * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
 441         * i386-dis.c (OP_E): Initialize local variables.
 442         * m10200-dis.c (print_insn_mn10200): Likewise.
 443         * mips-dis.c (print_insn_mips16): Likewise.
 444         * sh-dis.c (print_insn_shx): Likewise.
 445         * v850-dis.c (print_insn_v850): Likewise.
 446         * ns32k-dis.c (print_insn_arg): Declare.
 447         (get_displacement, invalid_float): Declare.
 448         (list_search, sign_extend, flip_bytes): Declare return type.
 449         (get_displacement): Likewise.
 450         (print_insn_arg): Likewise.  Make d int.  Fix sprintf format
 451         string.
 452         (print_insn_ns32k): Make i unsigned.
 453         (invalid_float): Make static.  Declare type of val.
 454         * tic30-dis.c (print_par_insn): Make i size_t.  Don't check strlen
 455         on each for iteration.
 456         * tic30-dis.c (get_indirect_operand): Likewise.
 457         * z8k-dis.c (print_insn_z8001): Declare return type.
 458         (print_insn_z8002): Likewise.
 459         (unparse_instr): Fix sprintf format strings.
 460
 461 Fri Mar 27 00:05:23 1998  Jeffrey A Law  (law@cygnus.com)
 462
 463         * mips-opc.c: Add "sync.l" and "sync.p".
 464
 465 start-sanitize-sky
 466 Thu Mar 26 13:27:37 1998  Doug Evans  <devans@canuck.cygnus.com>
 467
 468         * dvp-opc.c (extract_vif_datalen): Rewrite.
 469         (vif_insn_len): Perform 0->max+1 conversion for direct length.
 470
 471 Wed Mar 25 13:32:36 1998  Doug Evans  <devans@canuck.cygnus.com>
 472
 473         * dvp-dis.c (print_insn): Print unpack address in hex.
 474         * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
 475         Don't skip over '*', just record it.
 476         (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
 477         (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
 478         Don't skip over '*', just record it.
 479         (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
 480         (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
 481         (vif_opcodes): Likewise.
 482         (state_vif_{mpg,unpack}loc_star_p): New static locals.
 483         (vif_macros,vif_macro_count): New globals.
 484         (vif_unpack_len_value): New arguments wl,cl.  All callers updated.
 485         (vif_set_{mpg,unpack}loc): Delete.  All callers updated.
 486         (vif_get_wl_cl): New function.
 487         (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
 488
 489 end-sanitize-sky
 490 Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 491
 492         * m68k-dis.c (print_insn_m68k): Use info->mach to select the
 493         default m68k variant to recognize.
 494
 495         * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
 496         (ctrl, cobr, mem, ea): Likewise.
 497         (print_addr): Likewise.  Remove cast.
 498         (ea): Cast argument of print_addr to bfd_vma.
 499
 500         * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
 501         variable value.
 502         (cgen_parse_unsigned_integer): Likewise.
 503         (cgen_parse_address): Likewise.
 504
 505 Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>
 506
 507         * i960-dis.c (ctrl): Add full braces to structure initialization.
 508         (cobr, mem, reg): Likewise.
 509         (ea): Correct parenthesization in expression.
 510
 511         * cgen-asm.c: Include <ctype.h>.
 512         (build_asm_hash_table): Remove unused local variable i.
 513         (cgen_parse_keyword): Add casts to avoid warnings.
 514
 515         * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
 516         symbol.  Fix indentation.
 517         (print_insn_little_arm): Likewise.
 518
 519 start-sanitize-r5900
 520 Tue Mar 24 18:11:13 1998  Jeffrey A Law  (law@cygnus.com)
 521
 522         * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
 523         opcode extensions.
 524
 525 end-sanitize-r5900
 526 start-sanitize-m32rx
 527 Mon Mar 23 11:32:11 1998  Nick Clifton  <nickc@cygnus.com>
 528
 529         * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
 530         (PR15418).
 531
 532 end-sanitize-m32rx
 533 start-sanitize-sky
 534 Mon Mar 23 09:45:04 1998  Doug Evans  <devans@canuck.cygnus.com>
 535
 536         * dvp-opc.c (vif_operand_datalen_special): New global.
 537
 538 end-sanitize-sky
 539 start-sanitize-r5900
 540 Sun Mar 22 13:00:14 1998  Jeffrey A Law  (law@cygnus.com)
 541
 542         * vu0.h (vcallms): Use 'O' for call target operand.
 543         * mips-dis.c (print_insn_arg): Handle 'O'.
 544
 545 end-sanitize-r5900
 546 Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>
 547
 548         * configure.in: Use AM_DISABLE_SHARED.
 549         * aclocal.m4, configure: Rebuild with libtool 1.2.
 550
 551 start-sanitize-r5900
 552 Fri Mar 20 09:01:31 1998  Jeffrey A Law  (law@cygnus.com)
 553
 554         * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
 555         support.
 556         * vu0.h: Likewise.
 557
 558 end-sanitize-r5900
 559 Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>
 560
 561         These patches are courtesy of Jonathan Walton and Tony Thompson
 562         (athompso@cambridge.arm.com).
 563
 564         * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
 565         relative addresses.
 566
 567         * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
 568         both the offset and the label closest to the destination.
 569
 570 start-sanitize-r5900
 571 Thu Mar 19 13:53:25 1998  Jeffrey A Law  (law@cygnus.com)
 572
 573         * vu0.h: New file with cop2/vu0 instructions.
 574         * mips-opc.c: Include vu0.h.
 575         * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
 576         J, Q, X, and U.
 577         (print_insn_mips): Do not emit a tab after an instruction if the
 578         first arg is an instruction completer (&).  If the next arg is an
 579         escape character (%), then print the next arg verbatim.
 580         * Makefile.am (mips-opc.lo): Depend on vu0.h
 581
 582 end-sanitize-r5900
 583 start-sanitize-sky
 584 Thu Mar 19 10:42:51 1998  Doug Evans  <devans@canuck.cygnus.com>
 585
 586         * dvp-opc.c (vif_opcodes): Add stcycl.
 587
 588 Tue Mar 17 10:53:58 1998  Doug Evans  <devans@canuck.cygnus.com>
 589
 590         * dvp-dis.c (print_dma): Change length from 16 to 8.
 591
 592 end-sanitize-sky
 593 Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>
 594
 595         * m32r-opc.h: Regenerate.
 596
 597 start-sanitize-sky
 598 Thu Mar 12 09:18:54 1998  Doug Evans  <devans@canuck.cygnus.com>
 599
 600         * dvp-opc.c (print_dest1): Print dest spec again.
 601         (print_vfreg,print_accdest): Likewise.
 602         (vif_unpack_len): Round result up to word boundary.
 603
 604 end-sanitize-sky
 605 start-sanitize-vr4320
 606 Tue Mar 10 15:57:23 1998  Gavin Koch  <gavin@cygnus.com>
 607
 608         * mips-opc.c ("clz","dclz"): Added the 4320 versions.
 609
 610 Mon Mar  9 15:22:06 1998  Gavin Koch  <gavin@cygnus.com>
 611
 612         * mips-opc.c ("macc*","mul*"): Added the 4320 versions
 613         of these.
 614
 615 end-sanitize-vr4320
 616 start-sanitize-sky
 617 Fri Mar  6 11:27:53 1998  Doug Evans  <devans@canuck.cygnus.com>
 618
 619         * dvp-dis.c (print_gif): Fix length calcs for gifimage.
 620         (print_insn): Do mask comparison on proper opcode word.
 621         Print unsigned values in hex.
 622         * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
 623         (parse_bc): Catch missing dest.
 624         (parse_vfreg): Replace atoi call with strtol.
 625         (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
 626         (parse_bcftreg,parse_ffstreg): Handle missing dest.
 627         (extract_gif_eop): New function.
 628         (gif_operands): Update eop entry.
 629         (VGIFOP,VGIFNREGS): Fix calcs.
 630         (extract_gif_prim): Set *pinvalid to 1 if prim not used.
 631         (gif_regs): Add entry for unused 11 case.
 632         (print_gif_regs): Print empty list instead of nothing.
 633         (extract_gif_nloop): Fix value calc.
 634         (print_gif_nloop): Always print value, even if 0.
 635         (insert_vif_wlcl,extract_vif_wlcl): New functions.
 636         (vif_operands): Use them for wl,cl fields.
 637         (state_vif_wl,state_vif_cl): New static locals.
 638         (parse_vif_mode): Handle numeric args.
 639         (vif_unpack_len_value,vif_unpack_len): New functions.
 640         (vif_insn_len): Call vif_unpack_len.
 641
 642 end-sanitize-sky
 643 Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>
 644
 645         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 646
 647 Tue Mar  3 18:51:22 1998  Doug Evans  <devans@seba.cygnus.com>
 648
 649         * cgen-asm.in: Move insertion of generated routines to top of file.
 650         (insert_normal): Add prototype.  Delete `shift' arg.
 651         * cgen-dis.in: Move insertion of generated routines to top of file.
 652         (extract_normal): Add prototype.  Delete `shift' arg.
 653         (print_normal): Add prototype.  Call CGEN_PRINT_NORMAL if defined.
 654         (print_keyword): Add prototype.  Fix type of `attrs' arg.
 655
 656 start-sanitize-vr4320
 657 Tue Mar  3 11:47:58 1998  Gavin Koch  <gavin@cygnus.com>
 658
 659         * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
 660         * mips-opc.c ("mac","dmac") : Added 4320 insns.
 661
 662 end-sanitize-vr4320
 663 Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>
 664
 665         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
 666         assume that info->symbols is non-empty.
 667
 668 Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>
 669
 670         * alpha-opc.c (cvtqs) There is no such thing.
 671         (cvttq): Missing most of the /*d variants.
 672
 673 start-sanitize-r5900
 674 Fri Feb 27 13:16:42 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 675
 676         * mips-opc.c (r5900/madd.s): Takes three operands, not four.  Fix
 677         opcode.
 678         (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
 679         (r5900/msub.s): Takes three operands, not four.  Fix opcode.
 680
 681 end-sanitize-r5900
 682 start-sanitize-d30v
 683 Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>
 684
 685         * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
 686         delayed branches or jumps.
 687
 688 end-sanitize-d30v
 689 start-sanitize-sky
 690 Fri Feb 27 10:04:19 1998  Doug Evans  <devans@canuck.cygnus.com>
 691
 692         * dvp-opc.c (vif_operands): Add unpack[u] support.
 693         (vif_opcodes): Ditto.
 694         (*_vif_imrubits): Renamed from *_vif_imrbits.
 695
 696 Wed Feb 25 00:27:44 1998  Doug Evans  <devans@canuck.cygnus.com>
 697
 698         * dvp-dis.c (print_insn): Handle word number.
 699         Handle mips address vs vu address.
 700         * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
 701         (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
 702         ({insert,extract}_dma_addr): Fix word ofset.
 703         ({insert,print}_gif_regs): Fix encode/decode.
 704
 705 end-sanitize-sky
 706 Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>
 707
 708         * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
 709         to *info->symbols.
 710         * mips-dis.c (print_insn_{big,little}_mips): Likewise.
 711         * tic30-dis.c (print_branch): Likewise.
 712 start-sanitize-sky
 713         * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
 714         * dvp-dis.c (dvp_info_mach_type): New function.
 715         (print_insn_dvp): Call it.
 716         (print_vif): Return length of 4 if mpg or direct insn so following
 717         insns get properly disabled.
 718         (print_gif): Fix word order.
 719         * dvp-opc.c (vif_insn_len): New argument `pcpu'.  All callers updated.
 720         (gif_operands): Fix word order.
 721         (gif_opcodes): Likewise.
 722         ({insert,extract,print}_gif_regs): Likewise.
 723         (gif_regs): Add new register number/name changes.
 724         (dma_opcodes): Add dmarefe insn.
 725 end-sanitize-sky
 726
 727 Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>
 728
 729         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
 730         saved_symbol code as it is no longer needed.
 731
 732 Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>
 733
 734         * cgen-asm.c: Include symcat.h.
 735         * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
 736
 737         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
 738
 739 start-sanitize-sky
 740 Mon Feb 23 09:51:39 1998  Doug Evans  <devans@canuck.cygnus.com>
 741
 742         * dvp-opc.c (extra_dma_flags): Fix typos.
 743         (dma_operands): Fix word numbers.
 744         (dma_opcodes): Likewise.
 745         ({insert,extract}_dma_flags): Likewise.
 746
 747 end-sanitize-sky
 748 Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)
 749
 750         * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
 751
 752 start-sanitize-sky
 753 Fri Feb 20 18:02:20 1998  Doug Evans  <devans@canuck.cygnus.com>
 754
 755         * dvp-dis.c (print_gif): Complete.
 756         * dvp-opc.c (gif_operands,gif_opcodes): Complete.
 757         (state_gif_{nregs,regs,nloop}): New static locals.
 758         (*_gif_*): Complete.
 759         (dvp_opcode_init_{parse,print}): Init gif state locals.
 760         (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
 761         (vif_insn_len): Handle `unpack'.
 762         ({insert,extract}_dma_flags): Complete.
 763
 764 end-sanitize-sky
 765 start-sanitize-r5900
 766 Fri Feb 20 01:23:16 1998  Jeffrey A Law  (law@cygnus.com)
 767
 768         * mips-opc.c (mula.s): Renamed from multa.s.
 769
 770 end-sanitize-r5900
 771 Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>
 772
 773         * m32r-opc.[ch]: Regenerate.
 774
 775 start-sanitize-sky
 776 Thu Feb 19 02:11:39 1998  Doug Evans  <devans@charmed.cygnus.com>
 777
 778         * dvp-opc.c (dma_operands): Rewrite.
 779         (dma_operand_{count,addr}): New globals.
 780         (dma_opcodes): Rewrite.  Add "dmaend" with no operands.
 781         (insert_dma_addr): Insert value into insn.
 782         (extract_dma_addr): Extract value from insn.
 783
 784 Wed Feb 18 15:46:46 1998  Doug Evans  <devans@canuck.cygnus.com>
 785
 786         * dvp-dis.c (print_vu): Handle loi insns.
 787         (print_insn): Likewise.
 788         * dvp-opc.c (vu_lower_opcodes): Add "loi".
 789         (vu_operands): Make LDEST1 a FAKE operand.
 790         (parse_dest1): Allow elided argument.
 791         (print_dest1): Don't print the argument.
 792
 793 Tue Feb 17 18:48:25 1998  Doug Evans  <devans@canuck.cygnus.com>
 794
 795         * dvp-opc.c (parse_vfreg): Dest spec is optional.
 796         (print_vfreg): Don't print dest spec.
 797         (parse_accdest): Dest spec is optional.
 798         (print_accdest): Don't print dest spec.
 799
 800 end-sanitize-sky
 801 Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>
 802
 803         * Makefile.am (CGENFILES): Update.
 804         * Makefile.in: Regenerate.
 805         * cgen-asm.in (insert_normal): Result is error message now.
 806         Validate value to be inserted.
 807         (insert_insn_normal): Result is error message now.
 808         (@arch@_cgen_assemble_insn): Update.
 809         * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
 810         arguments.  Don't perform validation here.
 811         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
 812
 813 Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>
 814
 815         * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
 816         operand instance list.
 817         * m32r-opc.c: Regenerate.
 818
 819 Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>
 820
 821         * Makefile.am (AUTOMAKE_OPTIONS): Define.
 822         * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
 823
 824 Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>
 825
 826         * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
 827
 828 Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>
 829
 830         * configure.in: Get the version number from BFD.
 831         * configure: Rebuild.
 832
 833         From H.J. Lu <hjl@gnu.org>:
 834         * Makefile.am (libopcodes_la_LDFLAGS): Define.
 835         * Makefile.in: Rebuild.
 836
 837 Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>
 838
 839         * m32r-opc.c: Regenerate.
 840         * m32r-opc.h: Regenerate.
 841
 842 Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>
 843
 844         * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
 845         Ignore ALIAS insns if asked to.
 846         (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
 847         * m32r-opc.c: Regenerate.
 848
 849 start-sanitize-sky
 850         * dvp.opc.c: Nicely format opcode tables.
 851         (vu_operands): New element UFLAGS.
 852         (parse_uflags,print_uflags): New functions.
 853         (vu_upper_opcodes): Add UFLAGS to all insns.
 854
 855 end-sanitize-sky
 856 Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>
 857
 858         Fix rac to accept only a0:
 859         * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
 860         Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
 861         Introduce OPERAND_GPR.
 862         * d10v-dis.c (print_operand): Likewise.
 863
 864 Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>
 865
 866         * cgen-opc.in: New file.
 867         * cgen.sh: Translate @ARCH@.  Cat cgen-opc.in into @arch@-opc.c.
 868         * Makefile.am (CGENFILES): Add cgen-opc.in.
 869         * Makefile.in: Regenerate.
 870
 871         * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
 872         (cgen_hw_lookup): Make result const.
 873
 874         * cgen-dis.in (*): Use PTR instead of void *.
 875         (print_insn): Delete unused vars `i', `syntax'.
 876
 877         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
 878
 879 start-sanitize-sky
 880 Tue Feb 10 14:56:24 1998  Doug Evans  <devans@canuck.cygnus.com>
 881
 882         * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
 883         (vif_opcodes): Update renamed insns.
 884         * dvp-dis.c (*): Likewise.
 885
 886 end-sanitize-sky
 887 Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>
 888
 889         * configure, aclocal.m4: Rebuild with new libtool.
 890
 891 start-sanitize-d30v
 892 Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>
 893
 894         * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
 895         instructions use a PC relative branch, not absolute.
 896
 897 end-sanitize-d30v
 898 Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>
 899
 900         * configure.in: Set libtool_enable_shared rather than
 901         libtool_shared.  Remove diversion hack.
 902         * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
 903
 904 Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>
 905
 906         * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
 907         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
 908
 909 Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>
 910
 911         * tic30-dis.c: New file.
 912         * disassemble.c (disassembler): Add bfd_arch_tic30 case.
 913         * configure.in: Handle bfd_tic30_arch.
 914         * Makefile.am: Rebuild dependencies.
 915         (CFILES): Add tic30-dis.c
 916         (ALL_MACHINES): Add tic30-dis.lo.
 917         * configure, Makefile.in: Rebuild.
 918
 919 start-sanitize-m32rx
 920 Mon Feb  2 11:04:08 1998  Nick Clifton  <nickc@cygnus.com>
 921
 922         * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
 923         versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
 924         macwhi-a and macwlo-a instructions.
 925
 926 end-sanitize-m32rx
 927 start-sanitize-sky
 928 Fri Jan 30 17:39:21 1998  Ian Carmichael  <iancarm@cygnus.com>
 929
 930         * dvp-opc.c, fixed encoding of a bunch of instructions to
 931         be consistent with the asmvu assembler (and inconsistent
 932         with the specification).
 933
 934 Thu Jan 29 18:14:56 1998  Ian Carmichael  <iancarm@cygnus.com>
 935
 936         * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
 937         in the opcode table.  The pkemscalf instruction must come first.
 938
 939 Thu Jan 29 16:47:24 1998  Ian Carmichael  <iancarm@cygnus.com>
 940
 941         * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
 942
 943 end-sanitize-sky
 944 Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>
 945
 946         * m32r-opc.h (HAVE_CPU_M32R): Define.
 947
 948 start-sanitize-sky
 949 Wed Jan 28 13:46:19 1998  Doug Evans  <devans@canuck.cygnus.com>
 950
 951         * dvp-dis.c, dvp-opc.c: New files.
 952         * configure.in: Compile them if bfd_dvp_arch, as well as mips.
 953         * configure: Regenerate.
 954         * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
 955         (dvp-dis.lo,dvp-opc.lo): Add rules for.
 956         (mips-dis.lo): Compile with @archdefs@.
 957         * Makefile.in: Regenerate.
 958         * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
 959         * mips-dis.c (print_insn_little_mips): Check for DVP insns.
 960
 961 end-sanitize-sky
 962 Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>
 963
 964         * v850-opc.c (insertion routines): If both alignment and size is
 965         wrong then report this.
 966
 967 Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)
 968
 969         * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
 970         Only recognize instructions for the current target_processor.
 971
 972 Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>
 973
 974         * d10v-dis.c (PC_MASK): Correct value.
 975         (print_operand): If there's a reloc, don't calculate the
 976         address because they could be in different sections.
 977
 978 start-sanitize-cygnus
 979 Thu Jan 22 16:10:32 1998  Doug Evans  <devans@seba.cygnus.com>
 980
 981         * cgen.sh: Rewrite to be like simulator's version.
 982         * Makefile.am (cgen): Update call to cgen.sh.
 983         * Makefile.in: Regenerate
 984
 985 end-sanitize-cygnus
 986 Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>
 987
 988         * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
 989         instruction after the 4650's "mul" instruction; nobody's using the
 990         4010 these days.  If object files someday indicate which processor
 991         variant they're intended for, we can do a better job at this.
 992
 993 start-sanitize-r5900
 994 Tue Jan 13 09:21:56 1998  Jeffrey A Law  (law@cygnus.com)
 995
 996         * mips-opc.c (c.lt.s): Add r5900 variant.
 997         (c.le.s): Likewise.
 998
 999 end-sanitize-r5900
1000 Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>
1001
1002         * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1003         table provided entry size.  Use CGEN_INSN_MNEMONIC.
1004         (cgen_parse_keyword): Rewrite.
1005         * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1006         table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
1007         * cgen-opc.c: Clean up pass over `struct foo' usage.
1008         (cgen_keyword_lookup_value): Handle "" entry.
1009         (cgen_keyword_add): Likewise.
1010 start-sanitize-cygnus
1011         * Makefile.am: Add cgen support.
1012         * Makefile.in: Regenerate.
1013         * configure.in: Add cgen support.
1014         * configure: Regenerate.
1015         * aclocal.m4: Regenerate.
1016         * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1017 end-sanitize-cygnus
1018
1019 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
1020
1021         * mips-opc.c: Add FP_D to s.d instruction flags.
1022
1023 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1024
1025         * m68k-opc.c (halt, pulse): Enable them on the 68060.
1026
1027 start-sanitize-tic80
1028 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
1029
1030         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1031         PC relative offset forms before the 15 bit forms.  An assembler command
1032         line option now chooses the default.
1033
1034 end-sanitize-tic80
1035 start-sanitize-r5900
1036 Tue Dec 16 13:24:22 1997  Jeffrey A Law  (law@cygnus.com)
1037
1038         * mips-opc.c: Add many missing r5900 instructions.
1039
1040 end-sanitize-r5900
1041 start-sanitize-d30v
1042 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
1043
1044         * d30v-opc.c (d30v_opcode_table): Set new flags bits
1045         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1046
1047 end-sanitize-d30v
1048 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
1049
1050         * configure: Only build libopcodes shared if --enable-shared's value
1051         was `yes', or was set to `*opcodes*'.
1052         * aclocal.m4: Likewise.
1053         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1054         original source of this bit of code.  It's not clear what the best fix
1055         would be, though.
1056
1057 start-sanitize-r5900
1058 Mon Dec 15 12:43:36 1997  Jeffrey A Law  (law@cygnus.com)
1059
1060         * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1061 end-sanitize-r5900
1062 start-sanitize-tic80
1063 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
1064
1065         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1066         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1067         offset forms before the 15 bit forms, to default to the long forms.
1068
1069 end-sanitize-tic80
1070 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
1071
1072         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1073
1074 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
1075
1076         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1077         symbol if none is present.
1078         (print_insn_big_arm):  Prevent examination of stored symbol if
1079         none is present.
1080
1081 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
1082
1083         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1084
1085 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
1086
1087         * disassemble.c: Remove disasm_symaddr() function.
1088
1089         * arm-dis.c: Use info->symbol instead of info->flags to determine
1090         if disassmbly should be in Thumb or Arm mode.
1091
1092 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
1093
1094         * arm-dis.c: Add support for disassembling Thumb opcodes.
1095         (print_insn_thumb): New function.
1096
1097         * disassemble.c (disasm_symaddr): New function.
1098
1099         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1100         (thumb_opcodes): Table of Thumb opcodes.
1101
1102 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1103
1104         * m68k-opc.c (btst): Change Dd@s to Dd;b.
1105
1106         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1107         and 'v' as operand types.
1108
1109 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
1110
1111         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
1112         <olivier.carmona@di.epfl.ch>.
1113         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1114         which has a two word opcode with a one word argument.
1115
1116 start-sanitize-d30v
1117 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
1118
1119         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1120         unsigned, not signed.
1121         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1122
1123 end-sanitize-d30v
1124 Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>
1125
1126         * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1127         * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1128         (ftrv): Slay the cut-and-paste monster.
1129
1130 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1131
1132         * d10v-dis.c (print_operand):
1133         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1134
1135 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1136
1137         * d10v-opc.c (OPERAND_FLAG): Split into:
1138         (OPERAND_FFLAG, OPERAND_CFLAG) .
1139         (FSRC): Split into:
1140         (FFSRC, CFSRC).
1141
1142 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
1143
1144         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1145         field for all INSN_MACRO's.
1146         * mips16-opc.c: same
1147
1148 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
1149
1150         * mips-opc.c (sync,cache): These are 3900 insns.
1151
1152 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1153
1154         sh-opc.h (sh_table): Remove ftst/nan.
1155
1156 start-sanitize-vr5400
1157 Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>
1158
1159         * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1160         (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1161         last.
1162         * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1163
1164 end-sanitize-vr5400
1165 start-sanitize-tx49
1166 Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>
1167
1168         * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1169         Add tx49 insns and configury.
1170
1171 end-sanitize-tx49
1172 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
1173
1174         * mips-opc.c (ffc, ffs): Fix mask.
1175
1176 start-sanitize-d30v
1177 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
1178
1179         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1180         control registers.
1181
1182 end-sanitize-d30v
1183 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1184
1185         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1186 start-sanitize-vr5400
1187         Added VR5400 instructions.
1188         (N5): New cpu-id macro.
1189 end-sanitize-vr5400
1190         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1191
1192 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1193
1194         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1195         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1196
1197 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
1198
1199         * v850-dis.c (disassemble): Replace // with /* ... */
1200
1201 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
1202
1203         * sparc-opc.c: Add wr & rd for v9a asr's.
1204         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1205         (v9a_asr_reg_names): New variable.
1206         Patch from David Miller <davem@vger.rutgers.edu>.
1207
1208 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
1209
1210         * sparc-opc.c (v9notv9a): New insn type.
1211         (IMPDEP): Move to the end to not conflict with edge8 et al.
1212         Patch from David Miller <davem@vger.rutgers.edu>.
1213
1214 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
1215
1216         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1217
1218 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
1219
1220         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1221
1222 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
1223
1224         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1225         of disassemble_info structure to determine if an overlay address
1226         has a matching symbol in low memory.
1227
1228         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1229         new symbol_at_address_func field in disassemble_info structure.
1230
1231 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
1232
1233         * v850-opc.c (extract_d22): Use signed arithmatic.
1234
1235 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
1236
1237         * mips-opc.c: Three op mult is not an ISA insn.
1238
1239 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
1240
1241         * mips-opc.c: Fix formatting.
1242
1243 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
1244
1245         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1246         than assuming that char is signed.  Explicitly sign extend 16 bit
1247         values, rather than assuming that short is 16 bits.
1248         (OP_sI, OP_J, OP_DIR): Likewise.
1249
1250 start-sanitize-v850e
1251 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
1252
1253         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1254         system registers.
1255
1256 end-sanitize-v850e
1257 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
1258
1259         * v850-opc.c: Fix typo in comment.
1260
1261         * v850-dis.c (disassemble): Add test of processor type when
1262         determining opcodes.
1263
1264 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
1265
1266         * configure.in: Use a diversion to set enable_shared before the
1267         arguments are parsed.
1268         * configure: Rebuild.
1269
1270 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
1271
1272         * m68k-opc.c (TBL1): Use ! rather than `.
1273         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1274
1275 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
1276
1277         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1278
1279         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1280
1281         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1282         for mcf5200.
1283
1284         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1285         * aclocal.m4: Rebuild with new libtool.
1286         * configure: Rebuild.
1287
1288 start-sanitize-v850e
1289 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1290
1291         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1292
1293 end-sanitize-v850e
1294 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
1295
1296         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1297
1298 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
1299
1300         * v850-opc.c (v850_opcodes): Further rearrangements.
1301
1302 start-sanitize-d30v
1303 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
1304
1305         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1306
1307 end-sanitize-d30v
1308 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
1309
1310         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1311         parser to work.
1312
1313 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
1314
1315         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1316 start-sanitize-tx19
1317         * mips16-opc.c: Added mips16 sdbbp.
1318 end-sanitize-tx19
1319
1320 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
1321
1322         * v850-opc.c: Initialise processors field of v850_opcode structure.
1323
1324 start-sanitize-d30v
1325 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
1326
1327         Merge changes from Martin Hunt:
1328
1329         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1330
1331         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1332         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1333         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1334
1335         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1336
1337         * d30v-dis.c (print_insn): First operand of d*i (delayed
1338         branch) instructions is relative.
1339
1340         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1341         (d30v_operand_table): Add IMM6S3 type.
1342         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1343
1344         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1345         and cmp instructions.
1346
1347         * d30v-opc.c: Correct entries for repeat*, and sat*.
1348         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1349         types. Correct several formats.
1350
1351         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1352
1353         * d30v-opc.c (pre_defined_registers): Change control registers.
1354
1355         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1356         SHORT_C2.  Manual was incorrect.
1357
1358         * d30v-dis.c (lookup_opcode):  Return value now indicates
1359         if an opcode has a short and a long form.  Used for deciding
1360         to append a ".s" or ".l".
1361         (print_insn): Append a ".s" to an instruction if it is
1362         the short form and ".l" if it is a long form. Do not append
1363         anything if the instruction has only one possible size.
1364
1365         * d30v-opc.c: Change mulx2h to require an even register.
1366         New form: SHORT_A2; a SHORT_A form that needs an even
1367         register as the first operand.
1368
1369         * d30v-dis.c (print_insn_d30v): Fix problem where the last
1370         instruction was not being disassembled if there were an odd
1371         number of instructions.
1372
1373         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
1374
1375 end-sanitize-d30v
1376 start-sanitize-v850e
1377 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
1378
1379         * v850-dis.c (disassemble): Improved display of register lists.
1380
1381 end-sanitize-v850e
1382 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
1383
1384         * sparc-opc.c (sparc_opcodes): Fix assembler args to
1385         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1386         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1387         fandnot1s, fandnot2s.
1388
1389 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
1390
1391         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1392
1393 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
1394
1395         * cgen-asm.c (cgen_parse_address): New argument resultp.
1396         All callers updated.
1397         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1398
1399 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
1400
1401         * mn10200-dis.c (disassemble): PC relative instructions are
1402         relative to the next instruction, not the current instruction.
1403
1404 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
1405
1406         * v850-dis.c (disassemble): Only signed extend values that are not
1407         returned by extract functions.
1408         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1409
1410 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
1411
1412         * v850-opc.c: Update comments.  Remove use of
1413         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
1414
1415 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
1416
1417         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1418
1419 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
1420
1421         * configure: Rebuilt with latest devo autoconf for NT support.
1422
1423 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
1424
1425         * v850-dis.c (disassemble): Use curly brace syntax for register
1426         lists.
1427
1428         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1429         where r0 is being used as a destination register.
1430
1431 start-sanitize-v850e
1432 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
1433
1434         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1435 end-sanitize-v850e
1436
1437 Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1438
1439         * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1440         (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1441         (sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
1442         Add insns to access SGR and DBR.
1443         * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1444
1445 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
1446
1447         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1448
1449 start-sanitize-v850e
1450 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
1451
1452         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1453         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1454         opcodes..
1455
1456 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
1457
1458         * configure (cgen_files): Add support for v850e target.
1459         * configure.in (cgen_files):  Add support for v850e target.
1460
1461 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
1462
1463         * configure (cgen_files): Add support for v850ea target.
1464         * configure.in (cgen_files):  Add support for v850ea target.
1465 end-sanitize-v850e
1466
1467 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
1468
1469         * configure.in (bfd_arc_arch): Add.
1470         * configure: Rebuild.
1471         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1472         * Makefile.in: Rebuild.
1473         * arc-dis.c, arc-opc.c: New files.
1474         * disassemble.c (ARCH_all): Define ARCH_arc.
1475         (disassembler): Add ARC support.
1476
1477 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
1478
1479 start-sanitize-v850e
1480         * v850-dis.c (disassemble): Add support for v850EA instructions.
1481
1482         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1483         (v850_opcodes): Add v850EA instructions.
1484
1485         * v850-dis.c (disassemble): Add support for v850E instructions.
1486
1487         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1488         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1489         insert_spe, extract_spe): New Functions.
1490         (v850_opcodes): Add v850E instructions.
1491 end-sanitize-v850e
1492
1493         * v850-opc.c: Reorganised and re-layed out to improve readability
1494         and portability.
1495
1496 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
1497
1498         * configure: Rebuild with autoconf 2.12.1.
1499
1500 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
1501
1502         * aclocal.m4, configure: Rebuild with new automake patches.
1503
1504 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
1505
1506         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1507         * acinclude.m4: Just include acinclude.m4 from BFD.
1508         * aclocal.m4, configure: Rebuild.
1509
1510 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
1511
1512         * Makefile.am: New file, based on old Makefile.in.
1513         * acconfig.h: New file.
1514         * acinclude.m4: New file.
1515         * stamp-h.in: New file.
1516         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1517         Removed shared library handling; now handled by libtool.  Replace
1518         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
1519         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
1520         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
1521         handling in AC_OUTPUT.
1522         * dep-in.sed: Change .o to .lo.
1523         * Makefile.in: Now built with automake.
1524         * aclocal.m4: Now built with aclocal.
1525         * config.in, configure: Rebuild.
1526
1527 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
1528
1529         * mips-opc.c: Fix typo/thinko in "eret" instruction.
1530
1531 start-sanitize-r5900
1532 Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1533
1534         * mips-opc.c: Fix coding of mtsa.
1535
1536 end-sanitize-r5900
1537 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
1538
1539         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1540         Make array const.
1541         * sparc-dis.c (sorted_opcodes): New static local.
1542         (struct opcode_hash): `opcode' is pointer to const element.
1543         (build_hash): First arg is now table of sorted pointers.
1544         (print_insn_sparc): Sort opcodes by sorting table of pointers.
1545         (compare_opcodes): Update.
1546
1547 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
1548
1549         * cgen-opc.c: #include <ctype.h>.
1550         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
1551         Handle case insensitive hashing.
1552         (hash_keyword_value): Change type of `value' to unsigned int.
1553
1554 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
1555
1556         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1557         precision FP, mark it as such.  Likewise for double precision
1558         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
1559         possible.
1560 start-sanitize-r5900
1561         (mips_builtin_opcodes): Remove non-existant r5900 instructions
1562 end-sanitize-r5900
1563
1564 start-sanitize-r5900
1565 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
1566
1567         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1568         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1569
1570 end-sanitize-r5900
1571 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
1572
1573         * ppc-opc.c (extract_nsi): make unsigned expression signed before
1574         negating it.
1575         (UNUSED): remove one level of parens, so MSVC doesn't choke on
1576         nesting depth when all the macros are expanded.
1577
1578 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
1579
1580         * sparc-opc.c: The fcmp v9a instructions take an integer register
1581         as a destination, not a floating point register.  From Christian
1582         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1583
1584 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
1585
1586         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1587         syntax.  From Roman Hodek
1588         <rnhodek@faui22c.informatik.uni-erlangen.de>.
1589
1590         * i386-dis.c (twobyte_has_modrm): Fix pand.
1591
1592 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
1593
1594         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1595
1596 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
1597
1598         * arm-dis.c: Add prototypes for arm_decode_shift and
1599         print_insn_arm.
1600
1601 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
1602
1603         * mips-opc.c: Add r3900 insns.
1604
1605 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
1606
1607         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
1608         print delay slot instructions on the same line.  When using a PC
1609         relative load, add a comment with the value being loaded if it can
1610         be obtained.
1611
1612 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
1613
1614         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1615         to pushS/popS for segment regs and byte constant so that
1616         pushw/popw printed when in 16 bit data mode.
1617
1618         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1619         print cbtw, cwtd in 16 bit data mode.
1620         * i386-dis.c (putop): extra case W to support above.
1621
1622         * i386-dis.c (print_insn_x86): print addr32 prefix when given
1623         address size prefix in 16 bit address mode.
1624
1625 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
1626
1627         * sh-dis.c: Reindent.  Rename local variable fprintf to
1628         fprintf_fn.
1629
1630 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
1631
1632         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1633
1634 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
1635
1636         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1637           field membership.
1638         * mips16-opc.c (mip16_opcodes): same.
1639
1640 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
1641
1642         * m68k-opc.c (moveb): Change $d to %d.
1643
1644 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
1645
1646         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1647         (twobyte_has_modrm): Likewise.
1648         (grps): Likewise.
1649         (OP_MMX, OP_EM, OP_MS): New static functions.
1650
1651         * i386-dis.c: Revert patch of April 4.  The output now matches
1652         what gcc generates.
1653
1654 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
1655
1656         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1657         of $simm16.
1658
1659 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
1660
1661         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1662
1663 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
1664
1665         * Makefile.in (install): Depend upon installdirs.
1666         (installdirs): New target.
1667
1668 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
1669
1670         From Thomas Graichen <graichen@rzpd.de>:
1671         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1672         * configure: Rebuild.
1673
1674 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
1675
1676         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1677         Delete string{,s}.h support.
1678
1679 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
1680
1681         * cgen-asm.c (cgen_parse_operand_fn): New global.
1682         (cgen_parse_{{,un}signed_integer,address}): Update call to
1683         cgen_parse_operand_fn.
1684         (cgen_init_parse_operand): New function.
1685         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1686         from cgen_asm_init_parse.
1687         (m32r_cgen_assemble_insn): New operand `errmsg'.
1688         Delete call to as_bad, return error message to caller.
1689         (m32r_cgen_asm_hash_keywords): #if 0 out.
1690
1691 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1692
1693         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1694         not data register.
1695         [case 'J']: Fix typo in register name.
1696
1697 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
1698
1699         * configure.in: Substitute SHLIB_LIBS.
1700         * configure: Rebuild.
1701         * Makefile.in (SHLIB_LIBS): New variable.
1702         ($(SHLIB)): Use $(SHLIB_LIBS).
1703
1704 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
1705
1706         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1707
1708         * cgen-opc.c (hash_keyword_name): Improve algorithm.
1709
1710         * disassemble.c (disassembler): Handle m32r.
1711
1712 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
1713
1714         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1715         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1716         * Makefile.in (CFILES): Add them.
1717         (ALL_MACHINES): Add them.
1718         (dependencies): Regenerate.
1719         * configure.in (cgen_files): New variable.
1720         (bfd_m32r_arch): Add entry.
1721         * configure: Regenerate.
1722
1723 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
1724
1725         * configure.in: Correct file names for bfd_mn10[23]00_arch.
1726         * configure: Rebuild.
1727
1728         * Makefile.in: Rebuild dependencies.
1729
1730         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1731
1732         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
1733         fdivp.
1734
1735 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
1736
1737         * Branched binutils 2.8.
1738
1739 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
1740
1741         * m10200-dis.c: Rename from mn10200-dis.c.
1742         * m10200-opc.c: Rename from mn10200-opc.c.
1743         * m10300-dis.c: Rename from mn10300-dis.c
1744         * m10300-opc.c: Rename from mn10300-opc.c.
1745         * Makefile.in: Update accordingly.
1746
1747         * mips16-opc.c: Add mul and dmul macros.
1748
1749 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
1750
1751         * makefile.vms: Update CFLAGS, add clean target.
1752
1753 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
1754
1755         * mips-opc.c: Add "wait".  From Ralf Baechle
1756         <ralf@gnu.ai.mit.edu>.
1757
1758         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1759         * configure, config.in: Rebuild.
1760         * sysdep.h: Include <stdlib.h> if it exists.
1761         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
1762         <string.h>.
1763         * Makefile.in: Rebuild dependencies.
1764
1765 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
1766
1767         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
1768         Andrew Bray <andy@madhouse.demon.co.uk>.
1769
1770         * mips-opc.c: Add cast when setting mips_opcodes.
1771
1772 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
1773
1774         * v850-dis.c (disassemble):  Fix sign extension problem.
1775         * v850-opc.c (extract_d*):  Fix sign extension problems to make
1776         disassembly calculate branch offsets correctly.
1777
1778 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
1779
1780         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1781
1782         * mips-opc.c: Add dctr and dctw.
1783
1784 start-sanitize-d30v
1785 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1786
1787         * d30v-dis.c (print_insn): Change the way signed constants
1788         are displayed.
1789 end-sanitize-d30v
1790 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
1791
1792         * Makefile.in (BFD_H): New variable.
1793         (HFILES): New variable.
1794         (CFILES): Add all C files.
1795         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1796         Delete old dependencies, and build new ones.
1797         * dep-in.sed: New file.
1798
1799 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
1800
1801         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1802
1803 start-sanitize-coldfire
1804 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
1805
1806         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1807         instructions.
1808
1809 end-sanitize-coldfire
1810 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
1811
1812         * mn10200-opc.c: Change "trap" to "syscall".
1813         * mn10300-opc.c: Add new "syscall" instruction.
1814
1815 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
1816
1817         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1818         mulul insns on the coldfire.
1819
1820 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
1821
1822         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1823         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1824         (print_insn_little_arm): Likewise.
1825
1826 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
1827
1828         Based on patches from H.J. Lu <hjl@lucon.org>:
1829         * i386-dis.c (fetch_data): Add prototype.
1830         * m68k-dis.c (fetch_data): Add prototype.
1831         (dummy_print_address): Add prototype.  Make static.
1832         * ppc-opc.c (valid_bo): Add prototype.
1833         * sparc-dis.c (build_hash_table): Add prototype.
1834         (is_delayed_branch, compute_arch_mask): Add prototypes.
1835         (print_insn_sparc): Make several local variables const.
1836         (compare_opcodes): Change arguments to const PTR.  Add prototype.
1837         * sparc-opc.c (arg): Change name field to be const.
1838         (lookup_name, lookup_value): Add prototypes.  Change table and
1839         name parameters to be const.
1840         (sparc_encode_asi): Change name parameter to be const.
1841         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1842         (sparc_encode_sparclet_cpreg): Likewise.
1843         (sparc_decode_asi): Change return type to be const.
1844         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1845         (sparc_decode_sparclet_cpreg): Likewise.
1846
1847 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
1848
1849         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1850         Solaris doesn't like the combined options, and the -f is
1851         unnecessary.
1852         (stamp-tshlink, install): Likewise.
1853
1854 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
1855
1856         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1857         as relaxable.
1858
1859 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
1860
1861         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1862
1863 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
1864
1865         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1866         the mc68000.
1867
1868 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
1869
1870         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1871
1872 start-sanitize-tic80
1873 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
1874
1875         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1876
1877 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
1878
1879         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1880
1881 end-sanitize-tic80
1882 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1883
1884         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1885         floatformat_to_double to make portable.
1886         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1887         precision float.
1888
1889 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
1890
1891         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1892         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1893
1894 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1895
1896         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1897         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1898
1899 start-sanitize-tic80
1900 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
1901
1902         * tic80-opc.c (LSI_SCALED): Renamed from this ...
1903         (OFF_SL_BR_SCALED): ... to this, and added the flag
1904         TIC80_OPERAND_BASEREL to the flags word.
1905         (tic80_opcodes): Replace all occurances of LSI_SCALED with
1906         OFF_SL_BR_SCALED.
1907
1908 end-sanitize-tic80
1909 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
1910
1911         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1912         Change mips_opcodes from const array to a pointer,
1913         and change bfd_mips_num_opcodes from const int to int,
1914         so that we can increase the size of the mips opcodes table
1915         dynamically.
1916
1917 start-sanitize-tic80
1918 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
1919
1920         * tic80-opc.c (tic80_predefined_symbols): Revert change to
1921         store BITNUM values in the table in one's complement form
1922         to match behavior when assembler is given a raw numeric
1923         value for a BITNUM operand.
1924         * tic80-dis.c (print_operand_bitnum): Ditto.
1925
1926 end-sanitize-tic80
1927 start-sanitize-d30v
1928 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1929
1930         * d30v-opc.c: Removed references to FLAG_X.
1931
1932 end-sanitize-d30v
1933 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
1934
1935         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1936
1937 start-sanitize-d30v
1938 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1939
1940         * Makefile.in: Added d30v object files.
1941         * configure: (bfd_d30v_arch) Rebuilt.
1942         * configure.in: (bfd_d30v_arch) Added new case.
1943         * d30v-dis.c: New file.
1944         * d30v-opc.c: New file.
1945         * disassemble.c (disassembler) Add entry for d30v.
1946
1947 end-sanitize-d30v
1948 start-sanitize-tic80
1949 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
1950
1951         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1952         representations for the floating point BITNUM values.
1953
1954 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
1955
1956         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1957         in the table in one's complement form, as they appear in the
1958         actual instruction.
1959         (tic80_symbol_to_value): Use macros to access predefined
1960         symbol fields.
1961         (tic80_value_to_symbol): Ditto.
1962         (tic80_next_predefined_symbol): New function.
1963         * tic80-dis.c (print_operand_bitnum): Remove code that did
1964         one's complement for BITNUM values.
1965
1966 end-sanitize-tic80
1967 start-sanitize-r5900
1968 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
1969
1970         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1971
1972 end-sanitize-r5900
1973 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
1974
1975         * makefile.vms: Remove 8 bit characters.  Update to latest
1976         gcc release.
1977
1978 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
1979
1980         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1981
1982 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
1983
1984         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1985         (IMM24_PCREL): Likewise.
1986
1987 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
1988
1989         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1990         address for an extended PC relative instruction that is not a
1991         branch.
1992
1993 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1994
1995         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1996         bytes_per_line.
1997
1998 start-sanitize-tic80
1999 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
2000
2001         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2002         (tic80_opcodes): Sort entries so that long immediate forms
2003         come after short immediate forms, making it easier for
2004         assembler to select the right one for a given operand.
2005
2006 end-sanitize-tic80
2007 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
2008
2009         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2010         display_endian.
2011         (print_insn_mips16): Likewise.
2012
2013 start-sanitize-r5900
2014 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
2015
2016         * mips-opc.c: add r5900.
2017
2018 end-sanitize-r5900
2019 start-sanitize-tic80
2020 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
2021
2022         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2023         a symbol class that restricts translation to just that
2024         class (general register, condition code, etc).
2025
2026 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
2027
2028         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2029         and REG_DEST_E for register operands that have to be
2030         an even numbered register.  Add REG_FPA for operands that
2031         are one of the floating point accumulator registers.
2032         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2033         (tic80_opcodes): Change entries that need even numbered
2034         register operands to use the new operand table entries.
2035         Add "or" entries that are identical to "or.tt" entries.
2036
2037 end-sanitize-tic80
2038 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2039
2040         * mips16-opc.c: Add new cases of exit instruction for
2041         disassembler.
2042         * mips-dis.c (print_mips16_insn_arg): Display floating point
2043         registers in operands of exit instruction.  Print `$' before
2044         register names in operands of entry and exit instructions.
2045
2046 start-sanitize-tic80
2047 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
2048
2049         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2050         pairs for all predefined symbols recognized by the assembler.
2051         Also used by the disassembling routines.
2052         (tic80_symbol_to_value): New function.
2053         (tic80_value_to_symbol): New function.
2054         * tic80-dis.c (print_operand_control_register,
2055         print_operand_condition_code, print_operand_bitnum):
2056         Remove private tables and use tic80_value_to_symbol function.
2057
2058 end-sanitize-tic80
2059 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2060
2061         * d10v-dis.c (print_operand): Change address printing
2062         to correctly handle PC wrapping.  Fixes PR11490.
2063
2064 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
2065
2066         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2067         branches relaxable.
2068
2069 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
2070
2071         * mips-dis.c (print_insn_mips16): Set insn_info information.
2072         (print_mips16_insn_arg): Likewise.
2073
2074         * mips-dis.c (print_insn_mips16): Better handling of an extend
2075         opcode followed by an instruction which can not be extended.
2076
2077 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
2078
2079         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2080         coldfire moveb instruction to not allow an address register as
2081         destination.  Although the documentation does not indicate that
2082         this is invalid, experiments uncovered unexpected behavior.
2083         Added a comment explaining the situation.  Thanks to Andreas
2084         Schwab for pointing this out to me.
2085
2086 start-sanitize-tic80
2087 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
2088
2089         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2090         entries are presorted so that entries with the same mnemonic are
2091         adjacent to each other in the table.  Sort the entries for each
2092         instruction so that this is true.
2093
2094 end-sanitize-tic80
2095 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2096
2097         * m68k-dis.c: Include <libiberty.h>.
2098         (print_insn_m68k): Sort the opcode table on the most significant
2099         nibble of the opcode.
2100
2101 start-sanitize-tic80
2102 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
2103
2104         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2105         "vsub", "vst", "xnor", and "xor" instructions.
2106         (V_a1): Renamed from V_a, msb of accumulator reg number.
2107         (V_a0): Add macro, lsb of accumulator reg number.
2108
2109 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
2110
2111         * tic80-dis.c (print_insn_tic80): Broke excessively long
2112         function up into several smaller ones and arranged for
2113         the instruction printing function to be callable recursively
2114         to print vector instructions that have both a load and a
2115         math instruction packed into a single opcode.
2116         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2117         to explain why it comes after the other vector opcodes.
2118
2119 end-sanitize-tic80
2120 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2121
2122         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2123         move insns to handle immediate operands.
2124
2125 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2126
2127         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2128         fix operand mask in the "moveml" entries for the coldfire.
2129
2130 start-sanitize-tic80
2131 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
2132
2133         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2134         New macros for building vector instruction opcodes.
2135         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2136         FMT_LI, which were unused.  The field is now a flags field.
2137         Remove some opcodes that are possible, but illegal, such
2138         as long immediate instructions with doubles for immediate
2139         values.  Add "vadd" and "vld" instructions.
2140
2141 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
2142
2143         * tic80-opc.c (tic80_operands): Reorder some table entries to make
2144         the order more logical.  Move the shift alias instructions ("rotl",
2145         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2146         interspersed with the regular sr.x and sl.x instructions.  Add
2147         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2148         "sub", "subu", "swcr", and "trap".
2149
2150 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
2151
2152         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2153         (OFF_SL_PC): Renamed from OFF_SL.
2154         (OFF_SS_BR): New operand type for base relative operand.
2155         (OFF_SL_BR): New operand type for base relative operand.
2156         (REG_BASE): New operand type for base register operand.
2157         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2158         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2159         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2160         instructions.
2161         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2162         10 char field, padded with spaces on rhs, rather than a string
2163         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
2164         than old TIC80_OPERAND_RELATIVE.  Add support for new
2165         TIC80_OPERAND_BASEREL flag bit.
2166
2167 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
2168
2169         * tic80-dis.c (print_insn_tic80): Print floating point operands
2170         as floats.
2171         * tic80-opc.c (SPFI): Add single precision floating point
2172         immediate operand type.
2173         (ROTATE): Add rotate operand type for shifts.
2174         (ENDMASK): Add for shifts.
2175         (n): Macro for the 'n' bit.
2176         (i): Macro for the 'i' bit.
2177         (PD): Macro for the 'PD' field.
2178         (P2): Macro for the 'P2' field.
2179         (P1): Macro for the 'P1' field.
2180         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2181         "fcmp", and "fdiv".
2182
2183 end-sanitize-tic80
2184 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
2185
2186         * mn10200-dis.c (disassemble): Mask off unwanted bits after
2187         adding in current address for pc-relative operands.
2188
2189 start-sanitize-tic80
2190 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
2191
2192         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2193         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2194         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2195         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2196         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2197         REG_BASE_M_SI, REG_BASE_M_LI respectively.
2198         (REG_SCALED, LSI_SCALED): New operand types.
2199         (E): New macro for 'E' bit at bit 27.
2200         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2201         opcodes, including the various size flavors (b,h,w,d) for
2202         the direct load and store instructions.
2203
2204 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
2205
2206         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2207         in an instruction.
2208         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2209         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2210         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2211         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2212         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2213         masks with "MASK_* & ~M_*" to get the M bit reset.
2214         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2215
2216 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
2217
2218         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2219         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
2220         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2221         form.
2222         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2223         CC, SICR, and LICR table entries.
2224         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2225         "bcnd", and "brcr" opcodes.
2226
2227 end-sanitize-tic80
2228 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
2229
2230         * ppc-opc.c (powerpc_operands): Make comment match the
2231         actual fields (no shift field).
2232         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2233 start-sanitize-tic80
2234         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2235         partial implementation, work in progress.
2236         * tic80-opc.c (tic80_operands): Begin construction operands table.
2237         (tic80_opcodes): Continue populating opcodes table and start
2238         filling in the operand indices.
2239         (tic80_num_opcodes): Add this.
2240 end-sanitize-tic80
2241
2242 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2243
2244         * m68k-opc.c: Add #B case for moveq.
2245
2246 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
2247
2248         * mn10300-dis.c (disassemble): Make sure all variables are initialized
2249         before they are used.
2250
2251 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
2252
2253         * v850-opc.c (v850_opcodes): Put curly-braces around operands
2254         for "breakpoint" instruction.
2255
2256 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
2257
2258         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2259         (dep): Use ALL_CFLAGS rather than CFLAGS.
2260
2261 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2262
2263         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2264         flag.
2265
2266 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
2267
2268         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2269 start-sanitize-tic80
2270         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2271 end-sanitize-tic80
2272
2273 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2274
2275         * mips16-opc.c: Add "abs".
2276
2277 start-sanitize-tic80
2278 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
2279
2280         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2281         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2282         (disassembler): Add bfd_arch_tic80 support to set disassemble
2283         to print_insn_tic80.
2284         * tic80-dis.c (print_insn_tic80): Add stub.
2285
2286 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
2287
2288         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2289         * configure: Regenerate with autoconf.
2290         * tic80-dis.c: Add file.
2291         * tic80-opc.c: Add file.
2292
2293 end-sanitize-tic80
2294 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2295
2296         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
2297
2298 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
2299
2300         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2301         (mn10200_opcodes): Use it for some logicals and btst insns.
2302         Add "break" and "trap" instructions.
2303
2304         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2305
2306         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2307
2308 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2309
2310         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2311         relative load or add now depends upon whether the instruction is
2312         in a delay slot.
2313
2314 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
2315
2316         * mn10200-dis.c: Finish writing disassembler.
2317         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2318         Fix mask for "jmp (an)".
2319
2320         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2321         handle endianness issues for mn10300.
2322
2323         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2324
2325 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
2326
2327         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2328         instruction.  Fix opcode field for "movb (imm24),dn".
2329
2330         * mn10200-opc.c (mn10200_operands): Fix insertion position
2331         for DI operand.
2332
2333 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
2334
2335         * mn10200-opc.c: Create mn10200 opcode table.
2336         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
2337         but moving along nicely.
2338
2339 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2340
2341         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
2342
2343 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
2344
2345         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2346         specifiers for fmovem* instructions.
2347
2348 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
2349
2350         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2351
2352 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
2353
2354         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2355         with dsrl.
2356
2357 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
2358
2359         * mn10300-opc.c: Add some comments explaining the various
2360         operands and such.
2361
2362         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2363
2364 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2365
2366         * m68k-dis.c (print_insn_arg): Handle new < and > operand
2367         specifiers.
2368
2369         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2370         operand specifiers in fmovm* instructions.
2371
2372 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
2373
2374         * ppc-opc.c (insert_li): Give an error if the offset has the two
2375         least significant bits set.
2376
2377 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2378
2379         * mips-dis.c (print_insn_mips16): Separate the instruction from
2380         the arguments with a tab, not a space.
2381
2382 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
2383
2384         * mn10300-dis.c (disasemble): Finish conversion to '$' as
2385         register prefix.
2386
2387         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2388         mov am,(imm32,sp).
2389
2390 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
2391
2392         * configure: Rebuild with autoconf 2.12.
2393
2394         Add support for mips16 (16 bit MIPS implementation):
2395         * mips16-opc.c: New file.
2396         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2397         (mips16_reg_names): New static array.
2398         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2399         after seeing a 16 bit symbol.
2400         (print_insn_little_mips): Likewise.
2401         (print_insn_mips16): New static function.
2402         (print_mips16_insn_arg): New static function.
2403         * mips-opc.c: Add jalx instruction.
2404         * Makefile.in (mips16-opc.o): New target.
2405         * configure.in: Use mips16-opc.o for bfd_mips_arch.
2406         * configure: Rebuild.
2407
2408 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
2409
2410         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2411         operand specifiers in *save, *restore and movem* instructions.
2412
2413         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2414         the coldfire.
2415
2416         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2417         register operands for immediate arithmetic, not, neg, negx, and
2418         set according to condition instructions.
2419
2420         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2421         specifier of the effective-address operand in immediate forms of
2422         arithmetic instructions.  The specifier for the immediate operand
2423         notes how and where the constant will be stored.
2424
2425 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
2426
2427         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2428         opcode.
2429
2430         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2431         register prefix.
2432
2433         * mn10300-dis.c (disassemble): Prefix registers with '%'.
2434
2435 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
2436
2437         * mn10300-dis.c (disassemble): Handle register lists.
2438
2439         * mn10300-opc.c: Fix handling of register list operand for
2440         "call", "ret", and "rets" instructions.
2441
2442         * mn10300-dis.c (disassemble): Print PC-relative and memory
2443         addresses symbolically if possible.
2444         * mn10300-opc.c: Distinguish between absolute memory addresses,
2445         pc-relative offsets & random immediates.
2446
2447         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2448         in 7 byte insns.
2449         (disassemble): Handle SPLIT and EXTENDED operands.
2450
2451 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
2452
2453         * mn10300-dis.c: Rough cut at printing some operands.
2454
2455         * mn10300-dis.c: Start working on disassembler support.
2456         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2457
2458         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2459         list.
2460         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2461
2462 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2463
2464         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2465
2466 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
2467
2468         * mn10300-opc.c (mn10300_opcodes): Demand parens around
2469         register argument is calls and jmp instructions.
2470
2471 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
2472
2473         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2474         getx operand.  Fix opcode for mulqu imm,dn.
2475
2476 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
2477
2478         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2479         in MN10300_OPERAND_SPLIT operands for how many bits
2480         appear in the basic insn word.  Add IMM32_HIGH24,
2481         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2482         (mn10300_opcodes): Use new operands as needed.
2483
2484         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2485         for bset, bclr, btst instructions.
2486         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2487
2488         * mn10300-opc.c (mn10300_operands): Remove many redundant
2489         operands.  Update opcode table as appropriate.
2490         (IMM32): Add MN10300_OPERAND_SPLIT flag.
2491         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2492
2493 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
2494
2495         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2496         operands (for indexed load/stores).  Fix bitpos for DI
2497         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2498         few instructions that insert immediates/displacements in the
2499         middle of the instruction.  Add IMM8E for 8 bit immediate in
2500         the extended part of an instruction.
2501         (mn10300_operands): Use new opcodes as appropriate.
2502
2503 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2504
2505         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2506         sequential so the assembler never parallelizes it with
2507         other instructions.
2508
2509 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
2510
2511         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2512         a data/address register that appears in register field 0
2513         and register field 1.
2514         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2515
2516 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
2517
2518         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2519         standard disassembly.
2520
2521         * alpha-opc.c (alpha_operands): Rearrange flags slot.
2522         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2523         Recategorize PALcode instructions.
2524
2525 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
2526
2527         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2528
2529 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
2530
2531         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2532         there are no operand types.
2533
2534 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
2535
2536         * v850-opc.c (D9_RELAX): Renamed from D9, all references
2537         changed.
2538         (v850_operands): Make sure D22 immediately follows D9_RELAX.
2539
2540 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
2541
2542         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2543
2544 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
2545
2546         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2547         and sst.w instructions.
2548
2549         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2550         "bCC"instructions).
2551
2552 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2553
2554         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2555         and the arguments.
2556
2557 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
2558
2559         * ppc-opc.c (PPCPWR2): Define.
2560         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2561         it.
2562
2563 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
2564
2565         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2566         field for movhu instruction.
2567
2568         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2569         cast value to "long" not "signed long" to keep hpux10
2570         compiler quiet.
2571
2572 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
2573
2574         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2575         for mov (abs16),DN.
2576
2577         * mn10300-opc.c (FMT*): Remove definitions.
2578
2579         * mn10300-opc.c (mn10300_opcodes): Fix destination register
2580         for shift-by-register opcodes.
2581
2582         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2583         into [AD][MN][01] for encoding the position of the register
2584         in the opcode.
2585
2586 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
2587
2588         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2589         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2590
2591 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
2592
2593         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2594         Fix various typos.  Add "PAREN" operand.
2595         (MEM, MEM2): Define.
2596         (mn10300_opcodes): Surround all memory addresses with "PAREN"
2597         operands.  Fix several typos.
2598
2599         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2600         changes.
2601
2602 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
2603
2604         * mn10300-opc.c (FMT_XX): Renumber starting at one.
2605         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
2606         at this time.
2607         (mn10300_opcodes): Break opcode format out into its own field.
2608         Update many operand fields to deal with signed vs unsigned
2609         issues.  Fix one or two typos in the "mov" instruction
2610         opcode, mask and/or operand fields.
2611
2612 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2613
2614         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2615         m68851 wasn't reset.
2616
2617 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
2618
2619         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2620         all opcodes.  Very rough cut at operands for all opcodes.
2621
2622         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2623         opcode table.
2624
2625 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
2626
2627         * mn10200-opc.c, mn10300-opc.c: New files.
2628         * mn10200-dis.c, mn10300-dis.c: New files.
2629         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2630         * disassemble.c: Break mn10x00 support into 10200 and 10300
2631         support.
2632         * configure.in: Likewise.
2633         * configure: Rebuilt.
2634
2635 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
2636
2637         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2638
2639 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
2640
2641         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2642         MN10x00 processors.
2643         * disassemble (ARCH_mn10x00): Define.
2644         (disassembler): Handle bfd_arch_mn10x00.
2645         * configure.in: Recognize bfd_mn10x00_arch.
2646         * configure: Rebuilt.
2647
2648 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
2649
2650         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
2651         accordingly.  Don't declare functions using op_rtn.
2652
2653 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
2654
2655         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
2656         params to be more standard.
2657         * (disassemble):  Print absolute addresses and symbolic names for
2658         branch and jump targets.
2659         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
2660         bit operands.
2661         * (v850_opcodes):  Add breakpoint insn.
2662
2663 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
2664
2665         * m68k-opc.c: Move the fmovemx data register cases before the
2666         other cases, so that they get recognized before the data register
2667         does gets treated as a degenerate register list.
2668
2669 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
2670
2671         * mips-opc.c: Add a case for "div" and "divu" with two registers
2672         and a destination of $0.
2673
2674 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
2675
2676         * mips-dis.c (print_insn_arg): Add prototype.
2677         (_print_insn_mips): Ditto.
2678
2679 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
2680
2681         * mips-dis.c (print_insn_arg): Print condition code registers as
2682         $fccN.
2683
2684 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
2685
2686         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2687
2688 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
2689
2690         * v850-dis.c (disassemble): Make static.  Provide prototype.
2691
2692 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
2693
2694         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2695         in range checks.
2696
2697 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
2698
2699         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2700         ']' characters into the output stream.
2701         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2702         Add "memop" field to all opcodes (for the disassembler).
2703         Reorder opcodes so that "nop" comes before "mov" and "jr"
2704         comes before "jarl".
2705
2706         * v850-dis.c (print_insn_v850): Fix typo in last change.
2707
2708         * v850-dis.c (print_insn_v850): Properly handle disassembling
2709         a two byte insn at the end of a memory region when the memory
2710         region's size is only two byte aligned.
2711
2712         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2713
2714         * v850-dis.c (v850_reg_names): Define.
2715         (v850_sreg_names, v850_cc_names): Likewise.
2716         (disassemble): Very rough cut at printing operands (unformatted).
2717
2718         * v850-opc.c (BOP_MASK): Fix.
2719         (v850_opcodes): Fix mask for jarl and jr.
2720
2721         * v850-dis.c: New file.  Skeleton for disassembler support.
2722         * Makefile.in Remove v850 references, they're not needed here.
2723         * configure.in: Add v850-dis.o when building v850 toolchains.
2724         * configure: Rebuilt.
2725         * disassemble.c (disassembler): Call v850 disassembler.
2726
2727         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2728         (insert_d8_6, extract_d8_6): New functions.
2729         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2730         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2731         Add D8_6.
2732         (IF4A, IF4B): Use "D7" instead of "D7S".
2733         (IF4C, IF4D): Use "D8_7" instead of "D8".
2734         (IF4E, IF4F): New.  Use "D8_6".
2735         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
2736         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
2737
2738         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2739         (v850_operands): Change D16 to D16_15, use special insert/extract
2740         routines.  New new D16 that uses the generic insert/extract code.
2741         (IF7A, IF7B): Use D16_15.
2742         (IF7C, IF7D): New.  Use D16.
2743         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2744
2745         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2746         message.  Issue an error if the branch offset is odd.
2747
2748         * v850-opc.c: Add notes about needing special insert/extract
2749         for all the load/store insns, except "ld.b" and "st.b".
2750
2751         * v850-opc.c (insert_d22, extract_d22): New functions.
2752         (v850_operands): Use insert_d22 and extract_d22 for
2753         D22 operands.
2754         (insert_d9): Fix range check.
2755
2756 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
2757
2758         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2759         and set bits field to D9 and D22 operands.
2760
2761 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
2762
2763         * v850-opc.c (v850_operands): Define SR2 operand.
2764         (v850_opcodes): "ldsr" uses R1,SR2.
2765
2766         * v850-opc.c (v850_opcodes): Fix opcode specs for
2767         sld.w, sst.b, sst.h, sst.w, and nop.
2768
2769 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
2770
2771         * v850-opc.c (v850_opcodes): Add null opcode to mark the
2772         end of the opcode table.
2773
2774 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2775
2776         * d10v-opc.c (pre_defined_registers): Added register pairs,
2777         "r0-r1", "r2-r3", etc.
2778
2779 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
2780
2781         * v850-opc.c (v850_operands): Make I16 be a signed operand.
2782         Create I16U for an unsigned 16bit mmediate operand.
2783         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2784
2785         * v850-opc.c (v850_operands): Define EP operand.
2786         (IF4A, IF4B, IF4C, IF4D): Use EP.
2787
2788         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2789         with immediate operand, "movhi".  Tweak "ldsr".
2790
2791         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2792         correct.  Get sld.[bhw] and sst.[bhw] closer.
2793
2794         * v850-opc.c (v850_operands): "not" is a two byte insn
2795
2796         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2797
2798         * v850-opc.c (v850_operands): D16 inserts at offset 16!
2799
2800         * v850-opc.c (two): Get order of words correct.
2801
2802         * v850-opc.c (v850_operands): I16 inserts at offset 16!
2803
2804         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2805         register source and destination operands.
2806         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2807
2808         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
2809         same thinko in "trap" opcode.
2810
2811         * v850-opc.c (v850_opcodes): Add initializer for size field
2812         on all opcodes.
2813
2814         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
2815         Add D8 for 8-bit unsigned field in short load/store insns.
2816         (IF4A, IF4D): These both need two registers.
2817         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
2818         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2819         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
2820         for "ldsr" and "stsr".
2821         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2822         is unsigned.
2823
2824         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2825         short store word (sst.w).
2826
2827 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2828
2829         * v850-opc.c (v850_operands): Added insert and extract fields,
2830         pointers to functions that handle unusual operand encodings.
2831
2832 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
2833
2834         * v850-opc.c (v850_opcodes): Enable "trap".
2835
2836         * v850-opc.c (v850_opcodes): Fix order of displacement
2837         and register for "set1", "clr1", "not1", and "tst1".
2838
2839 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
2840
2841         * v850-opc.c (v850_operands): Add "B3" support.
2842         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2843         and "tst1".
2844
2845         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2846
2847         * v850-opc.c: Close unterminated comment.
2848
2849 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
2850
2851         * v850-opc.c (v850_operands): Add flags field.
2852         (v850_opcodes): add move opcodes.
2853
2854 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
2855
2856         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2857         * configure: (bfd_v850v_arch) Add new case.
2858         * configure.in: (bfd_v850_arch) Add new case.
2859         * v850-opc.c: New file.
2860
2861 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
2862
2863         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2864
2865 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2866
2867         * d10v-opc.c: Add additional information to the opcode
2868         table to help determinine which instructions can be done
2869         in parallel.
2870
2871 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
2872
2873         * mpw-make.sed: Update editing of include pathnames to be
2874         more general.
2875
2876 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
2877
2878         * arm-opc.h: Added "bx" instruction definition.
2879
2880 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
2881
2882         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2883
2884 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2885
2886         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2887
2888 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2889
2890         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2891
2892 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
2893
2894         * makefile.vms: Update for alpha-opc changes.
2895
2896 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
2897
2898         * i386-dis.c (print_insn_i386): Actually return the correct value.
2899         (ONE, OP_ONE): #ifdef out; not used.
2900
2901 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2902
2903         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2904         Changed subi operand type to treat 0 as 16.
2905
2906 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
2907
2908         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
2909         <rose@netcom.com>.
2910
2911 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
2912
2913         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2914         memory transfer instructions. Add new format string entries %h and %s.
2915         * arm-dis.c: (print_insn_arm): Provide decoding of the new
2916         formats %h and %s.
2917
2918 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2919
2920         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2921         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2922
2923 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
2924
2925         * alpha-dis.c (print_insn_alpha_osf): Remove.
2926         (print_insn_alpha_vms): Remove.
2927         (print_insn_alpha): Make globally visible.  Chose the register
2928         names based on info->flavour.
2929         * disassemble.c: Always return print_insn_alpha for the alpha.
2930
2931 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2932
2933         * d10v-dis.c (dis_long): Handle unknown opcodes.
2934
2935 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2936
2937         * d10v-opc.c: Changes to support signed and unsigned numbers.
2938         All instructions with the same name that have long and short forms
2939         now end in ".l" or ".s".  Divs added.
2940         * d10v-dis.c: Changes to support signed and unsigned numbers.
2941
2942 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2943
2944         * d10v-dis.c: Change all functions to use info->print_address_func.
2945
2946 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2947
2948         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2949         move ccr/sr insns more strict so that the disassembler only
2950         selects them when the addressing mode is data register.
2951
2952 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2953         * d10v-opc.c (pre_defined_registers):  Declare.
2954         * d10v-dis.c (print_operand): Now uses pre_defined_registers
2955         to pick a better name for the registers.
2956
2957 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
2958
2959         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
2960         operands for fexpand and fpmerge.  From Christian Kuehnke
2961         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2962
2963 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
2964
2965         * alpha-dis.c (print_insn_alpha): No longer the user-visible
2966         print routine.  Take new regnames and cpumask arguments.
2967         Kill the environment variable nonsense.
2968         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
2969         (print_insn_alpha_vms): New function.  Do VMS style regnames.
2970         * disassemble.c (disassembler): Test bfd flavour to pick
2971         between OSF and VMS routines.  Default to OSF.
2972
2973 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
2974
2975         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2976         * configure: Rebuild.
2977         * Makefile.in (install): Use @INSTALL_SHLIB@.
2978
2979 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2980
2981         * configure: (bfd_d10v_arch) Add new case.
2982         * configure.in: (bfd_d10v_arch) Add new case.
2983         * d10v-dis.c: New file.
2984         * d10v-opc.c: New file.
2985         * disassemble.c (disassembler) Add entry for d10v.
2986
2987 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2988
2989         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2990         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2991
2992 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
2993
2994         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
2995         distinguish between variants of the instruction set.
2996         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
2997         distinguish between variants of the instruction set.
2998
2999 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
3000
3001         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
3002         the 8086 instruction set.
3003         * i386-dis.c:  General cleanups.  Make most things static.  Add
3004         prototypes.  Get rid of static variables aflags and dflags.  Pass
3005         them as args (to almost everything).
3006
3007 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
3008
3009         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3010
3011         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3012
3013         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3014         if the next arg is marked with SRC_IN_DST.  Gross.
3015
3016         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3017         we're looking for and find EXR.
3018
3019         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3020         if we're looking for KBIT and we don't find it.
3021
3022         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3023         for L_3 and L_2.
3024
3025         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3026         3bit immediate operands.
3027
3028 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3029
3030         * Released binutils 2.7.
3031
3032         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
3033         <kkaempf@progis.ac-net.de>.
3034
3035 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3036
3037         * alpha-opc.c: Correct second case of "mov" to use OPRL.
3038
3039 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
3040
3041         * sparc-dis.c (print_insn_sparclite):  New routine to print
3042         sparclite instructions.
3043
3044 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3045
3046         * m68k-opc.c (m68k_opcodes): Add coldfire support.
3047
3048 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
3049
3050         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3051         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3052         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3053
3054 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3055
3056         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3057         Use autoconf-set values.
3058         (docdir, oldincludedir): Removed.
3059         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3060
3061 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
3062
3063         * alpha-opc.c: New file.
3064         * alpha-opc.h: Remove.
3065         * alpha-dis.c: Complete rewrite to use new opcode table.
3066         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3067         * configure: Rebuild with autoconf 2.10.
3068         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3069         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3070         alpha-opc.h.
3071         (alpha-opc.o): New target.
3072
3073 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
3074
3075         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3076         Set imm_added_to_rs1 even if the source and destination register
3077         are not the same.
3078
3079         * sparc-opc.c: Add some two operand forms of the wr instruction.
3080
3081 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
3082
3083         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3084         to just "mode".
3085
3086         * disassemble.c (disassembler): Handle H8/S.
3087         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3088
3089 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
3090
3091         * sparc-opc.c: Add beq/teq as aliases for be/te.
3092
3093         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
3094         <sergei@msil.sps.mot.com>.
3095
3096 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
3097
3098         * makefile.vms: New file.
3099
3100         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3101
3102 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
3103
3104         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3105         regardless of plen.
3106
3107 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
3108
3109         * i386-dis.c (OP_OFF): Call append_prefix.
3110
3111 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3112
3113         * ppc-opc.c (instruction encoding macros): Add explicit casts to
3114         unsigned long to silence a warning from the Solaris PowerPC
3115         compiler.
3116
3117 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
3118
3119         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3120
3121 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
3122
3123         * sparc-dis.c (X_IMM,X_SIMM): New macros.
3124         (X_IMM13): Delete.
3125         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
3126         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3127         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
3128         cpush, cpusha, cpull sparclet insns.
3129
3130 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
3131
3132         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3133
3134 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3135
3136         * sparc-opc.c: Set F_FBR on floating point branch instructions.
3137         Set F_FLOAT on other floating point instructions.
3138
3139 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3140
3141         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3142         registers.
3143         (powerpc_opcodes): Add 860/821 specific SPRs.
3144
3145 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
3146
3147         * configure.in: Permit --enable-shared to specify a list of
3148         directories.  Set and substitute BFD_PICLIST.
3149         * configure: Rebuild.
3150         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
3151         uses.  Set to @BFD_PICLIST@.
3152
3153 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
3154
3155         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3156         not "abs", which may be needed for the absolute in something
3157         like btst #0,@10:8.  Print L_3 immediates separately from other
3158         immediates.  Change ABSMOV reference to ABS8MEM.
3159
3160 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
3161
3162         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3163         (current_arch_mask): New static global.
3164         (compute_arch_mask): New static function.
3165         (print_insn_sparc): Delete sparc_v9_p.  New static local
3166         current_mach.  Resort opcode table if current_mach changes.
3167         Generalize "insn not supported" test.
3168         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3169         Delete test for v9/!v9.
3170         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3171         (v6notlet): Define.
3172         (brfc): Split into CBR and FBR for coprocessor/fp branches.
3173         (brfcx): Renamed to FBRX.
3174         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
3175         coprocessor mnemonics are not supported on the sparclet).
3176         (condf): Renamed to CONDF.
3177         (SLCBCC2): Delete F_ALIAS flag.
3178
3179 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
3180
3181         * sparc-opc.c (sparc_opcodes): rd must be 0 for
3182         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
3183
3184 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
3185
3186         * Makefile.in (config.status): Depend upon BFD VERSION file, so
3187         that the shared library version number is set correctly.
3188
3189 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
3190
3191         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
3192         Miles Bader <miles@gnu.ai.mit.edu>.
3193         * configure: Rebuild.
3194
3195 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
3196
3197         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3198         malloc.
3199
3200 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3201
3202         * configure: Rebuild with autoconf 2.8.
3203
3204 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3205
3206         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3207         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3208
3209 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
3210
3211         * configure.in: Don't set SHLIB or SHLINK to an empty string,
3212         since they appear as targets in Makefile.in.
3213         * configure: Rebuild.
3214
3215 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
3216
3217         * mpw-make.sed: Edit out shared library support bits.
3218
3219 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
3220
3221         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3222         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3223         (sparc_opcodes): Add sparclet insns.
3224         (sparclet_cpreg_table): New static local.
3225         (sparc_{encode,decode}_sparclet_cpreg): New functions.
3226         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3227
3228 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
3229
3230         * i386-dis.c (index16): New static variable.
3231         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3232         other way around.
3233         (OP_indirE): Return result of OP_E.
3234         (OP_E): Check for 16 bit addressing mode, and disassemble
3235         correctly.  Optimised 32 bit case a little.  Don't print
3236         "(base,index,scale)" when sib specifies only an offset.
3237
3238 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
3239
3240         * configure.in: Set and substitute SHLIB_DEP.
3241         * configure: Rebuild.
3242         * Makefile.in (SHLIB_DEP): New variable.
3243         (LIBIBERTY_LISTS, BFD_LIST): New variables.
3244         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
3245         COMMON_SHLIB, add them to piclist with appropriate modifications.
3246         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
3247         here: just use piclist.
3248
3249 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
3250
3251         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3252         (print_insn_sparc): Rewrite v9/not-v9 tests.
3253         (compare_opcodes): Likewise.
3254         * sparc-opc.c (MASK_<ARCH>): Define.
3255         (v6,v7,v8,sparclite,v9,v9a): Redefine.
3256         (sparclet,v6notv9): Define.
3257         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
3258         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3259
3260 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
3261
3262         * configure.in: Call AC_PROG_CC before configure.host.
3263         * configure: Rebuild.
3264
3265         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3266
3267 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
3268
3269         * i386-dis.c (onebyte_has_modrm): New static array.
3270         (twobyte_has_modrm): New static array.
3271         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3272
3273 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3274
3275         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3276         $(SHLINK).
3277
3278 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3279
3280         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3281         doesn't conflict.
3282
3283 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3284
3285         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3286         m68010up, not just m68020up | cpu32.
3287
3288         * Makefile.in (SONAME): New variable.
3289         ($(SHLINK)): Make a link to the transformed name, as well.
3290         (stamp-tshlink): New target.
3291         (install): Skip stamp-tshlink during install.
3292
3293 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3294
3295         * configure.in: Call AC_ARG_PROGRAM.
3296         * configure: Rebuild.
3297         * Makefile.in (program_transform_name): New variable.
3298         (install): Transform library name before installing it.
3299
3300 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
3301
3302         * i960-dis.c (mem): Add HX dcinva instruction.
3303
3304         Support for building as a shared library, based on patches from
3305         Alan Modra <alan@spri.levels.unisa.edu.au>:
3306         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3307         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3308         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3309         * configure: Rebuild.
3310         * Makefile.in (ALLLIBS): New variable.
3311         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3312         (COMMON_SHLIB, SHLINK): New variables.
3313         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3314         (STAGESTUFF): Remove variable.
3315         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3316         (stamp-piclist, piclist): New targets.
3317         ($(SHLIB), $(SHLINK)): New targets.
3318         ($(OFILES)): Depend upon stamp-picdir.
3319         (disassemble.o): Build twice if PICFLAG is set.
3320         (MOSTLYCLEAN): Add pic/*.o.
3321         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3322         (distclean): Remove pic and stamp-picdir.
3323         (install): Install shared libraries.
3324         (stamp-picdir): New target.
3325
3326 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
3327
3328         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3329         Print unknown instruction as "unknown", rather than in hex.
3330
3331 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
3332
3333         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3334
3335 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
3336
3337         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3338
3339 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
3340
3341         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3342         when necessary.  From Ulrich Drepper
3343         <drepper@myware.rz.uni-karlsruhe.de>.
3344
3345 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3346
3347         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3348         sparc_num_opcodes.  Update architecture enum values.
3349         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3350         (sparc_opcode_lookup_arch): New function.
3351         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3352         (sparc_opcodes): Add v9a shutdown insn.
3353
3354 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
3355
3356         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3357         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
3358         architecture.
3359         (print_insn_sparc64): Deleted.
3360         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3361         print_insn_sparc.
3362
3363         * sparc-opc.c (architecture_pname): Add v9a.
3364
3365 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
3366
3367         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3368         incorrectly defined as 0x16 when it should be 0x15.
3369         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3370         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
3371         excb (exception barrier) which is defined in the Alpha
3372         Architecture Handbook version 2.
3373         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3374         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
3375         disassembled as or, for example.
3376
3377 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
3378
3379         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3380         (_print_insn_mips): Change i from int to unsigned int.
3381
3382 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
3383
3384         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3385         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
3386
3387 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
3388
3389         * i386-dis.c: Added Pentium Pro instructions.
3390
3391 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3392
3393         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3394         being for Power2.
3395
3396 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3397
3398         * sh-opc.h (sh_nibble_type): Added REG_B.
3399         (sh_arg_type): Added A_REG_B.
3400         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3401         and stc.l opcodes.
3402         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3403
3404 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
3405
3406         * disassemble.c (disassembler): Use new bfd_big_endian macro.
3407
3408 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
3409
3410         * Makefile.in (distclean): Remove stamp-h.  From Ronald
3411         F. Guilmette <rfg@monkeys.com>.
3412
3413 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
3414
3415         From David Mosberger-Tang  <davidm@azstarnet.com>:
3416         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3417         instruction.
3418
3419 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3420
3421         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3422         (sh_table): Added many SH3 opcodes.
3423         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3424
3425 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3426
3427         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3428         (subco,subco.): Mark this PPC, not PPCCOM.
3429
3430 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
3431
3432         * configure: Rebuild with autoconf 2.7.
3433
3434 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
3435
3436         * configure: Rebuild with autoconf 2.6.
3437
3438 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
3439
3440         * configure.in: Sort list of architectures.  Accept but do nothing
3441         for alliant, convex, pyramid, romp, and tahoe.
3442
3443 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
3444
3445         * a29k-dis.c (print_special): Change num to unsigned int.
3446
3447 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
3448
3449         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3450         shifting it.
3451
3452 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
3453
3454         * configure.in: Call AC_CHECK_PROG to find and cache AR.
3455         * configure: Rebuilt.
3456
3457 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
3458
3459         * configure.in: Add case for bfd_i860_arch.
3460         * configure: Rebuild.
3461
3462 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
3463
3464         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3465         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3466         (NEXTDOUBLE): Likewise.
3467         (print_insn_m68k): Don't match fmoveml if there is more than one
3468         register in the list.
3469         (print_insn_arg): Handle a place of '8' for a type of 'L'.
3470
3471 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
3472
3473         * m68k-opc.c: Use #W rather than #w.
3474         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3475
3476 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
3477
3478         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3479         and likewise for all the dbxx opcodes.
3480
3481 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
3482
3483         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3484
3485 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
3486
3487         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3488         the VR4100 specific instructions to the mips_opcodes structure.
3489
3490 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
3491
3492         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3493         ugly Metrowerks bug in CW6, is fixed in CW7.
3494
3495 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3496
3497         * ppc-opc.c (whole file): Add flags for common/any support.
3498
3499 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
3500
3501         * Makefile.in (BISON): Remove macro.
3502         (FLAGS_TO_PASS): Remove BISON.
3503
3504 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
3505
3506         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3507
3508         * m68k-dis.c (print_insn_m68k): Recognize all two-word
3509         instructions that take no args by looking at the match mask.
3510         (print_insn_arg): Always print "%" before register names.
3511         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3512         [case '_']: Don't print "@#" before address.
3513         [case 'J']: Use "%s" as format string, not register name.
3514         [case 'B']: Treat place == 'C' like 'l' and 'L'.
3515
3516 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
3517
3518         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3519         name correctly.
3520
3521 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
3522
3523         From David Mosberger-Tang  <davidm@azstarnet.com>
3524
3525         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3526         (alpha_insn_set): added definitions for VAX floating point
3527         instructions (Unix compilers don't generate these, but handcoded
3528         assembly might still use them).
3529
3530         * alpha-dis.c (print_insn_alpha): added support for disassembling
3531         the miscellaneous instructions in the Alpha instruction set.
3532
3533 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
3534
3535         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3536         no longer create sysdep.h, sed ppc-opc.c to work around a
3537         serious Metrowerks C bug.
3538         * mpw-make.in: Remove.
3539         * mpw-make.sed: New file, used by mpw-configure to edit
3540         Makefile.in into an MPW makefile.
3541
3542 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
3543
3544         * Makefile.in (maintainer-clean): New synonym for realclean.
3545
3546 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3547
3548         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3549         which use '0', '1', and '2' instead.  Specify the proper size for
3550         a pmove immediate operand.  Correct the pmovefd patterns to be
3551         moves to a register, not from a register.
3552         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3553
3554 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
3555
3556         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3557         %psr, %wim, %tbr as F_NOTV9.
3558
3559 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
3560
3561         * Makefile.in (Makefile): Just rebuild Makefile when running
3562         config.status.
3563         (config.h, stamp-h): New targets.
3564         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3565         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
3566         rebuilding config.h.
3567         * configure: Rebuild.
3568
3569         * mips-opc.c: Change unaligned loads and stores with "t,A"
3570         operands to use "t,A(b)".
3571
3572 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3573
3574         * sh-dis.c (print_insn_shx): Add F_FR0 support.
3575
3576 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3577
3578         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3579         until 3 instead of until 2.
3580
3581 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
3582
3583         * Makefile.in (ALL_CFLAGS): Define.
3584         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3585         (MOSTLYCLEAN): Add config.log.
3586         (distclean): Don't remove config.log.
3587         * configure.in: Substitute HDEFINES.
3588         * configure: Rebuild.
3589
3590 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3591
3592         * sh-opc.h (sh_arg_type): Add F_FR0.
3593         (sh_table, case fmac): Add F_FR0 as first argument.
3594
3595 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3596
3597         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3598
3599 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
3600
3601         * sparc-dis.c: Remove all references to NO_V9.
3602
3603 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
3604
3605         * aclocal.m4: Just include ../bfd/aclocal.m4.
3606         * configure: Rebuild.
3607
3608 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
3609
3610         * sparc-dis.c (X_DISP19): Define.
3611         (print_insn, case 'G'): Use it.
3612         (print_insn, case 'L'): Sign extend displacement.
3613
3614 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
3615
3616         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3617         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
3618         host_makefile_frag or frags.
3619         * aclocal.m4: New file.
3620         * configure: Rebuild.
3621         * Makefile.in (INSTALL): Set to @INSTALL@.
3622         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3623         (INSTALL_DATA): Set to @INSTALL_DATA@.
3624         (AR): Set to @AR@.
3625         (AR_FLAGS): Set to rc rather than qc.
3626         (CC): Define as @CC@.
3627         (CFLAGS): Set to @CFLAGS@.
3628         (@host_makefile_frag@): Remove.
3629         (config.status): Remove dependency upon @frags@.
3630
3631         * configure.in: ../bfd/config.bfd now just sets shell variables.
3632         Use them rather than looking through target Makefile fragments.
3633         * configure: Rebuild.
3634
3635 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3636
3637         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3638
3639 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
3640
3641         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3642         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3643         sparc64 insns.
3644
3645         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3646         (lookup_{name,value}): New functions.
3647         (prefetch_table): New static local.
3648         (sparc_{encode,decode}_prefetch): New functions.
3649         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3650
3651 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3652
3653         * sh-opc.h: Add blank lines to improve readabililty of sh3e
3654         instructions.
3655
3656 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3657
3658         * sh-dis.c: Correct comment on first line of file.
3659
3660 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
3661
3662         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3663
3664         * sparc-opc.c (asi, membar): New static locals.
3665         (sparc_{encode,decode}_{asi,membar}): New functions.
3666         (sparc_opcodes, membar insn): Fix.
3667         * sparc-dis.c (print_insn): Call sparc_decode_asi.
3668         Support decoding of membar masks.
3669         (X_MEMBAR): Define.
3670
3671 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
3672
3673         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3674
3675 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3676
3677         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3678         and likewise for the other branches.  Add bhs as an alias for bcc,
3679         and likewise for the size variants.  Add dbhs as an alias for
3680         dbcc.
3681
3682 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
3683
3684         * sh-opc.h (FP sts instructions): Update to match reality.
3685
3686 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
3687
3688         * m68k-dis.c: (fpcr_names): Add % before all register names.
3689         (reg_names): Likewise.
3690         (print_insn_arg): Don't explicitly print % before register names.
3691         Add % before register names in static array names.  In case 'r',
3692         print data registers as `@(Dn)', not `Dn@'.  When printing a
3693         memory address, don't print @# before it.
3694         (print_indexed): Change base_disp and outer_disp from int to
3695         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
3696         syntax.  Sign extend 8 byte displacement correctly.
3697         (print_base): Print using MIT syntax.  Print zpc when appropriate.
3698         Change parameter disp from int to bfd_vma.
3699
3700         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3701         for jsr.
3702
3703 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
3704
3705         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3706         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3707         * sh-opc.h (sh_arg_type): Add new operand types.
3708         (sh_table): Add new opcodes from SH3E Floating Point ISA.
3709
3710 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
3711
3712         * Makefile.in (distclean): Remove generated file config.h.
3713
3714 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
3715
3716         * Makefile.in (distclean): Remove generated file config.h.
3717
3718 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
3719
3720         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3721         Clean up tables.
3722         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3723         (opcode): Remove.
3724         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
3725         rather than numopcodes.  Use m68k_opcodes rather than removed
3726         opcode function.  Don't check F_ALIAS.
3727         (print_insn_arg): Change first parameter to be const char *.
3728         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3729         (m68k-opc.o): New target.
3730         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3731         * configure: Rebuild.
3732
3733 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
3734
3735         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3736         (opcode_bits, opcode_hash_table): New variables.
3737         (opcodes_initialized): Renamed from opcodes_sorted.
3738         (build_hash_table): New function.
3739         (is_delayed_branch): Use hash table.
3740         (print_insn): Renamed from print_insn_sparc, made static.
3741         Build and use hash table.  If !sparc64, ignore sparc64 insns,
3742         and vice-versa if sparc64.
3743         (print_insn_sparc, print_insn_sparc64): New functions.
3744         (compare_opcodes): Move sparc64 opcodes to end.
3745         Print commutative insns with constant second.
3746         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3747
3748 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
3749
3750         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
3751         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
3752         avoids printing a delay slot in a delay slot.
3753         * sh-opc.h (sh_table): Fully bracket last entry.
3754
3755 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
3756
3757         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3758
3759 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
3760
3761         * configure.in: Get host_makefile_frag from ${srcdir}.
3762
3763         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
3764         config.h from config.in.  Don't set up sysdep.h link.
3765         * sysdep.h: New file.
3766         * configure, config.in: New files, generated from configure.in.
3767         * Makefile.in: Updated to be processed autoconf-style.
3768         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
3769         (Makefile): Depend on config.status.
3770         (config.status): New rule.
3771         * configure.bat: Update Makefile substitutions.
3772
3773 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
3774
3775         * mips-opc.c (L1): Define.
3776         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3777         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3778         and wb.
3779
3780 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
3781
3782         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3783         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3784         have multiple add units but only a single logical unit.
3785
3786         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3787         shifted by 18, without any insertion or extraction function.
3788         (insert_cr, extract_cr): Remove.
3789
3790 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3791
3792         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3793         register names.
3794
3795 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
3796
3797         * mpw-config.in: Add sh and i386 configs, remove sparc config.
3798         * sh-opc.h: Add copyright.
3799
3800 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
3801
3802         * Makefile.in (crunch-m68k): Delete extra target accidentally
3803         checked in a while ago.
3804
3805 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3806
3807         * sh-opc.h (sh_table): Add SH3 support.
3808
3809 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
3810
3811         * sh-opc.h: Added bsrf and braf.
3812
3813 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3814
3815         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
3816         bogus [ls]fm{ea,fd} patterns.
3817
3818         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3819         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3820         initialize it from memory.  Make function static.
3821         (print_insn_{big,little}_arm): New functions.
3822         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3823         the correct endianness.
3824
3825 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
3826
3827         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3828         enum list.
3829
3830 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3831
3832         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3833         17th, so that it builds again using GCC as the compiler.
3834
3835 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3836
3837         * mips-dis.c (print_insn_little_mips): Cast return value from
3838         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3839         expects an unsigned long, and that might be fewer words of
3840         argument storage (e.g., if bfd_vma is long long on a 32-bit
3841         machine).
3842         (print_insn_big_mips): Likewise with bfd_getb32 value.
3843         (_print_insn_mips): Now static.
3844
3845 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
3846
3847         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3848         gcc memory hog problem with initializer is fixed.
3849
3850 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
3851
3852         Merge in support for Mac MPW as a host.
3853         (Old change descriptions retained for informational value.)
3854
3855         * mpw-config.in (archname): Compute from the config.
3856         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3857
3858         * mpw-config.in (target_arch): Compute from canonical target.
3859         (m68k, mips, powerpc, sparc): Add architectures.
3860         * mpw-make.in (disassemble.c.o): Add.
3861         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3862
3863         * mpw-config.in (BFD_MACHINES): Set to a default value.
3864         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3865
3866         * mpw-make.in (CSEARCH): Add extra-include to search path.
3867
3868         * mpw-config.in (varargs.h): Don't create.
3869         (sysdep.h): Create using forward-include.
3870         * mpw-make.in (CSEARCH): Add include/mpw to search path.
3871
3872         * mpw-config.in: New file, MPW version of configure.in.
3873         * mpw-make.in: New file, MPW version of Makefile.in.
3874
3875 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3876
3877         * alpha-dis.c (print_insn_alpha): Put empty statement after
3878         default label.
3879
3880 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
3881
3882         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3883         (low_sign_extend): Likewise.
3884         (get_field): Delete unused function.
3885         (set_field, deposit_14, deposit_21): Likewise.
3886
3887 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3888
3889         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
3890           (guy@netapp.com).
3891
3892 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
3893
3894         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
3895
3896         * alpha-opc.h (OSF_ASMCODE): define
3897         print pal-code names as defined in App C of the
3898         Alpha Architecture Reference Manual
3899
3900         * alpha-dis.c: cleaned up output
3901         print stylized code forms as defined in App A.4.3 of the
3902         Alpha Architecture Reference Manual
3903
3904 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
3905
3906         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
3907         `rfe'.
3908         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3909         'N', and 'M'.
3910
3911 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3912
3913         * m68k-dis.c (opcode): New function.  Returns address of opcode
3914         table entry given index, even if the opcode table was split to
3915         work around gcc bugs.
3916         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3917         directly.
3918         (BREAK_UP_BIG_DECL): Make secondary array static and const.
3919         (reg_names): Now const.
3920         (print_insn_arg): Arrays cacheFieldName and names now const.
3921         (print_indexed): Array scales now const.
3922
3923 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
3924
3925         * ppc-opc.c: Sort recently added instructions by minor opcode
3926         number within major opcode number.
3927
3928 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
3929
3930         * hppa-dis.c: Include libhppa.h.
3931
3932 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3933
3934         * mips-opc.c: Change dli to use M_DLI, and add dla.
3935
3936 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3937
3938         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
3939
3940 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
3941
3942         * mips-opc.c: Add r4650 mul instruction.
3943
3944 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
3945
3946         * mips-opc.c: Add uld and usd macros for unaligned double load and
3947         store.
3948
3949 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3950
3951         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3952         mfdcr, mtdcr, icbt, iccci.
3953
3954 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
3955
3956         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3957         signed char fields to shorts, more portable.
3958
3959 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
3960
3961         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3962         char fields as signed chars, since they may have negative values.
3963
3964 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3965
3966         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3967           (mycroft@netbsd.org).
3968
3969 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
3970
3971         From "Logg, Ed" <elogg@ea.com>:
3972         * ppc-opc.c (extract_bdm): Correct parenthezisation.
3973         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3974         value.
3975
3976 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
3977
3978         * ppc-opc.c: Changes based on patch from David Edelsohn
3979         <edelsohn@mhpcc.edu>.
3980         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3981         SPR.
3982         (FXM_MASK): Define.
3983         (insert_tbr): New static function.
3984         (extract_tbr): New static function.
3985         (XFXFXM_MASK, XFXM): Define.
3986         (XSPRBAT_MASK, XSPRG_MASK): Define.
3987         (powerpc_opcodes): Add instructions to access special registers by
3988         name.  Add mtcr and mftbu.
3989
3990 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3991
3992         * mips-opc.c (P3): Define.
3993         (mips_opcodes): Add mad and madu.
3994
3995 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
3996
3997         * configure.in: Add W65 support.
3998         * disassemble.c: Likewise.
3999         * w65-opc.h, w65-dis.c: New files.
4000
4001 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4002
4003         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4004         immediates.
4005
4006 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4007
4008         * mips-opc.c: Add dli as a synonym for li.
4009
4010 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4011
4012         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4013         print something for reserved opcode values, even if it won't
4014         assemble again.
4015
4016         * mips-dis.c (_print_insn_mips): When initializing, shift right
4017         and mask, to avoid sign extension problems on the Alpha.
4018
4019         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4020         control registers.
4021
4022 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4023
4024         * sh-opc.h (mov.l gbr): Get direction right.
4025         * sh-dis.c (print_insn_shx): New function.
4026         (print_insn_shl, print_insn_sh): Call print_insn_shx to
4027         print opcodes with right byte order.
4028
4029 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4030
4031         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4032         to avoid conflicts with getopt.
4033
4034 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4035
4036         * hppa-dis.c (print_insn_hppa): Read the instruction using
4037         bfd_getb32, so that it works on a little endian or 64 bit host.
4038         Remove unused local variable op.
4039
4040 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4041
4042         * mips-opc.c: Use or instead of addu for pseudo-op move, since
4043         addu does not work correctly if -mips3.
4044
4045 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4046
4047         * a29k-dis.c (print_special): Add special register names defined
4048         on 29030, 29040 and 29050.
4049         (print_insn): Handle new operand type 'I'.
4050
4051 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4052
4053         * Makefile.in (INSTALL): Use top level install.sh script.
4054
4055 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4056
4057         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4058         that it works on a little endian host.
4059
4060 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4061
4062         * configure.in: Use ${config_shell} when running config.bfd.
4063
4064 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4065
4066         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4067
4068 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4069
4070         * a29k-dis.c (print_insn): Print the opcode.
4071
4072 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4073
4074         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4075
4076 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
4077
4078         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4079
4080 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4081
4082         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4083         which store a value into memory.
4084
4085 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4086
4087         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4088         * arm-dis.c, arm-opc.h: New files.
4089
4090 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
4091
4092         * Makefile.in (ns32k-dis.o): Add dependency.
4093         * ns32k-dis.c (print_insn_arg): Declare initialized local as
4094         string, not as array of chars.
4095
4096 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4097
4098         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4099
4100         * sparc-opc.c: Added sparclite extended FP operations, and
4101         versions of v9 impdep* instructions permitting specification of
4102         the OPF field.
4103
4104 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4105
4106         * i960-dis.c (reg_names): Now const.
4107         (struct sparse_tabent): New type, copied from array type in mem
4108         function.
4109         (ctrl): Local static array ctrl_tab now const.
4110         (cobr): Local static array cobr_tab now const.
4111         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
4112         static variable mem_tab no longer explicitly initialized.  Changed
4113         mem_init to const array of struct sparse_tabent.
4114         (reg): Local static variable reg_tab no longer explicitly
4115         initialized.  Changed reg_init to const array of struct
4116         sparse_tabent.
4117         (ea): Local static array scale_tab now const.
4118
4119         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4120         (REG_MAX): Updated.
4121
4122 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
4123
4124         * configure.bat: the disassember needs to be enabled for
4125         "objdump -d" to work in djgpp.
4126
4127 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4128
4129         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4130         (invalid_float): Enabled general version, doesn't require running
4131         on ns32k host.  Changed to take char* argument, and test for
4132         explicitly specified sizes, instead of using sizeof() on host CPU
4133         types.
4134         (INVALID_FLOAT): Cast first argument.
4135         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4136         list_P032, list_M032): Now const.
4137         (optlist, list_search): Made appropriate arguments now point to
4138         const.
4139         (print_insn_arg): Changed static array of one-character-string
4140         pointers into a static const array of characters; fixed sprintf
4141         statement accordingly.
4142
4143 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
4144
4145         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
4146         from distribution. A ns32k-dis.c from a previous distribution has
4147         been brought up to date and supports the new interface.
4148
4149         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4150
4151         * configure.in: add bfd_ns32k_arch target support.
4152
4153         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4154         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4155
4156 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
4157
4158         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4159         disassembly right.
4160
4161 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
4162
4163         * h8300-dis.c, mips-dis.c: Don't use true and false.
4164
4165 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
4166
4167         * configure.in: Change --with-targets to --enable-targets.
4168
4169 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4170
4171         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4172         opcodes to the first instruction with that opcode, to speed
4173         disassembly of large files.  From ralphc@pyramid.com (Ralph
4174         Campbell).
4175
4176 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4177
4178         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4179
4180 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
4181
4182         * configure.bat: update to latest makefile.in
4183
4184 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
4185
4186         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4187         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4188         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4189         slot insn is in a delay slot.
4190         * z8k-opc.h: (resflg): Fix patterns.
4191         * h8500-opc.h Fix CR insn patterns.
4192
4193 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4194
4195         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4196         "cmpl" before POWER versions, so that gas -many uses them.
4197
4198 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4199
4200         * disassemble.c: New file.
4201         * Makefile.in (OFILES): Add disassemble.o.
4202         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4203         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
4204         binutils/configure.in.
4205
4206         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4207         opcode being examined.
4208
4209 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4210
4211         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4212         (insert_ral, insert_ram, insert_ras): New functions.
4213         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4214         RAS for store with update.
4215
4216 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4217
4218         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
4219         (edelsohn@npac.syr.edu).
4220
4221 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4222
4223         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4224         immediate argument.
4225
4226 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
4227
4228         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4229
4230 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4231
4232         * ppc-opc.c (powerpc_operands): The signedp field has been
4233         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
4234         instead.  Add new operand SISIGNOPT.
4235         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4236         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4237         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4238         than signedp field.
4239
4240 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4241
4242         * i386-dis.c (struct private):  Renamed to dis_private. `private'
4243         is a reserved word for dynix cc.
4244
4245 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4246
4247         * configure.in: Change error message to refer to bfd/config.bfd
4248         rather than bfd/configure.in.
4249
4250 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
4251
4252         * ppc-opc.c: Define POWER2 as short alias flag.
4253         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4254         fsqrt.
4255
4256 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4257
4258         * i960-dis.c (print_insn_i960): Don't read a second word for
4259         opcodes 0, 1, 2 and 3.
4260
4261 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4262
4263         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4264
4265 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4266
4267         * m68881-ext.c: Removed; no longer used.
4268         * Makefile.in: Changed accordingly.
4269
4270         * m68k-dis.c (ext_format_68881): Don't declare.
4271         (print_insn_m68k): If an instruction uses place 'i', it uses at
4272         least four fixed bytes.
4273         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
4274         extended float, convert to double using floatformat_to_double, not
4275         ieee_extended_to_double, and fetch the data before converting it.
4276
4277 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4278
4279         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
4280         davidj@ICSI.Berkeley.EDU (David Johnson).
4281
4282 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4283
4284         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4285         PowerPC uses bdnz[l][a].
4286
4287 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4288
4289         * dis-buf.c, i386-dis.c:  Include sysdep.h.
4290
4291 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4292
4293         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4294
4295         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4296         by Motorola PowerPC 601 with PPC_OPCODE_601.
4297         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4298         Disassemble Motorola PowerPC 601 instructions as well as normal
4299         PowerPC instructions.
4300
4301 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4302
4303         * i960-dis.c (reg, mem): Just use a static array instead of
4304         calling xmalloc.
4305
4306 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4307
4308         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4309         condition name index if this is for a negated condition.
4310
4311         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4312         Floating point format for 'H' operand is backwards from normal
4313         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
4314         operands (fmpyadd and fmpysub), handle bizarre register
4315         translation correctly for single precision format.
4316
4317         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4318         or 'I' operands if the next format specifier is 'M' (fcmp
4319         condition completer).
4320
4321 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4322
4323         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4324         single number giving a bitmask for the MB and ME fields of an M
4325         form instruction.  Change NB to accept 32, and turn it into 0;
4326         also turn 0 into 32 when disassembling.  Seperated SH from NB.
4327         (insert_mbe, extract_mbe): New functions.
4328         (insert_nb, extract_nb): New functions.
4329         (SC_MASK): Mask out SA and LK bits.
4330         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4331         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
4332         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
4333         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4334         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4335         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
4336         (powerpc_macros): Define table of macro definitions.
4337         (powerpc_num_macros): Define.
4338
4339         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4340         if PPC_OPERAND_NEXT is set.
4341
4342 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4343
4344         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4345         char.  Retrieve contents using bfd_getl32 instead of shifting.
4346
4347 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4348
4349         * ppc-opc.c: New file.  Opcode table for PowerPC, including
4350         opcodes for POWER (RS/6000).
4351         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
4352         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4353         (CFILES): Add ppc-dis.c.
4354         (ppc-dis.o, ppc-opc.o): New targets.
4355         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4356
4357 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4358
4359         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4360         No space before 'u', 'f', or 'N'.
4361
4362 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4363
4364         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4365         farther than we should.
4366
4367         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4368
4369 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
4370
4371         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4372
4373 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
4374
4375         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4376         needs it, to prevent reading past the end of a section.
4377
4378 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4379
4380         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4381         Removed t,A case for la; always use t,A(b) case.
4382
4383 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4384
4385         From Ted Lemen <mellon@pepper.ncd.com>
4386         * mips-dis.c (print_insn_arg): Handle 'k'.
4387         * mips-opc.c: Make cache use k, not t.
4388
4389 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4390
4391         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
4392         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4393         FLOAT_FORMAT_CODE to put out floating point register names.
4394
4395 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4396
4397         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4398
4399 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4400
4401         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4402
4403 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4404
4405         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4406         larger than 32.  Moved dsxx32 variants first for disassembler.
4407
4408 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4409
4410         * z8kgen.c, z8k-opc.h: Add full lda information.
4411
4412 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
4413
4414         * hppa-dis.c (print_insn_hppa): Do not emit a space after
4415         movb instructions.  Any necessary space will be emitted by
4416         the code to handle nullification completers.
4417
4418 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4419
4420         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4421
4422 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4423
4424         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
4425         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
4426
4427 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4428
4429         * mips-opc.c: Correct lwu opcode value (book had it wrong).
4430
4431 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4432
4433         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4434         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4435
4436 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
4437
4438         * m88k-dis.c (m88kdis): comment change.  Remove space after
4439           printing mnemonic.
4440           (printop): handle new arg types DEC and XREG for m88110.
4441
4442 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
4443
4444         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4445         type for absolute branch addresses.  Delete special
4446         "ble" and "be" code in 'W' operand code.
4447
4448 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4449
4450         * mips-opc.c: Set hazard information correctly for branch
4451         likely instructions.
4452
4453 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4454
4455         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
4456         info->fprintf_func for printing and info->print_address_func for
4457         address output.
4458
4459 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4460
4461         * mips-opc.c: Set INSN_TRAP for tXX instructions.
4462
4463 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4464
4465         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4466         Corrected second case of "b" for disassembler.
4467
4468 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4469
4470         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
4471         to BFD swapping routines to correspond to BFD name changes.
4472
4473 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4474
4475         * mips-opc.c: Change div machine instruction to be z,s,t rather
4476         than s,t.  Change div macro to be d,v,t rather than d,s,t.
4477         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
4478         rem and remu which generates only the corresponding div
4479         instruction.  This is for compatibility with the MIPS assembler,
4480         which only generates the simple machine instruction when an
4481         explicit destination of $0 is used.
4482         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4483
4484 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4485
4486         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4487         WR_31 hazard for bal, bgezal, bltzal.
4488
4489 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4490
4491         * hppa-dis.c (print_insn_hppa): Use print function
4492         from within the disassemble_info, not fprintf_filtered.
4493
4494 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4495
4496         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
4497         Law, law@cs.utah.edu.)
4498
4499 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4500
4501         * mips-opc.c ("absu"): Removed.
4502         ("dabs"): Added.
4503
4504 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4505
4506         * mips-opc.c: Added r6000 and r4000 instructions and macros.
4507         Changed hazard information to distinguish between memory load
4508         delays and coprocessor load delays.
4509
4510 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4511
4512         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
4513
4514 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4515
4516         * configure.in: Don't pass cpu to config.bfd.
4517
4518 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4519
4520         * m88k-dis.c (m88kdis): Make class unsigned.
4521
4522 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
4523
4524         * alpha-dis.c (print_insn_alpha): One branch format case was
4525         missing the instruction name.
4526
4527 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4528
4529         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4530         Add the arch-specific auxiliary files.
4531         (OFILES): Remove the arch-specific auxiliary files
4532         and use BFD_MACHINES instead of DIS_LIBS.
4533         * configure.in: Set BFD_MACHINES based on --with-targets option.
4534
4535 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4536
4537         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
4538         for swc1.
4539
4540 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4541
4542         * sparc-opc.c: Change CONST to const to deal with gcc
4543         -Dconst=__const -traditional.
4544
4545 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4546
4547         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4548         coprocessor instructions out of #if 0, and made them use new
4549         argument type "C".
4550
4551 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4552
4553         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4554
4555 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
4556
4557         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4558         instruction, for use by the disassembler.
4559
4560         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
4561         hand-coded sign extensions that depended on 32-bit host ints.
4562         FIXME, we still depend on big-endian host bitfield ordering.
4563         (sparc_print_insn):  Set the insn_info_valid field, and the
4564         other fields that describe the instruction being printed.
4565
4566 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
4567
4568         * sparc-opc.c (call): Accept all 6 addressing modes valid for
4569         `jmp' instead of just one of them.
4570
4571 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4572
4573         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4574         (fput_fp_reg_r): Renamed from fput_reg_r.
4575         (fput_fp_reg): New function.
4576         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4577
4578         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4579
4580         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4581
4582 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4583
4584         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4585
4586         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4587         don't output a space.
4588
4589         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4590
4591 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
4592
4593         * mips-opc.c: New file, containing opcode table from
4594         ../include/opcode/mips.h.
4595         * Makefile.in: Add it.
4596
4597 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4598
4599         * m88k-dis.c: New file, moved in from gdb and changed to use the
4600         new dis-asm.h disassembler interface.
4601         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4602         (m88k-dis.o): New target.
4603
4604 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
4605
4606         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4607         argument string const char * to correspond to opcode/mips.h.
4608
4609 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
4610
4611         * mips-dis.c: Updated to account for name changes in new version
4612         of opcode/mips.h.
4613         * Makefile.in: Added header file dependencies.
4614
4615 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
4616
4617         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4618
4619 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4620
4621         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4622         extend, rather than shifts.
4623
4624 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
4625
4626         * Makefile.in: Undo 15 June change.
4627
4628 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
4629
4630         * m68k-dis.c (print_insn_arg):  Change return value to byte count
4631         or error code.
4632         * m68k-dis.c:  Re-write to detect invalid operands before
4633         printing anything, so we can handle this the same way we
4634         handle invalid opcodes.
4635
4636 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4637
4638         * sh-dis.c, sh-opc.h: Understand some more opcodes.
4639
4640 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
4641
4642         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4643         header files.
4644
4645 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4646
4647         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4648
4649         * configure.in: Do make sysdep.h link.
4650         * Makefile.in: Search ../include.  Don't search ../bfd.
4651
4652 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
4653
4654         Changes from Jeff Law, law@cs.utah.edu:
4655         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
4656         Do not print a space before the completers specified by
4657         'a' and 'd'.
4658
4659 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
4660
4661         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4662         defined, since gdb has been fixed.
4663
4664         Changes from Jeff Law, law@cs.utah.edu:
4665         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4666         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4667         be a *disassemble_info, not a *FILE.
4668         * hppa-dis.c: Support 'd', '!', and 'a'.
4669         * hppa-dis.c: Support 's' to extract a 2 bit space register.
4670         * hppa-dis.c: Delete cases which are no longer needed.
4671
4672 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
4673
4674         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4675
4676 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4677
4678         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4679         H8/300-H opcodes.
4680
4681 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
4682
4683         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4684         * configure.in:  No longer need to configure to get sysdep.h.
4685
4686 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
4687
4688         * Patches from Jeffrey Law <law@cs.utah.edu>.
4689         * hppa-dis.c: Support 'I', 'J', and 'K' in output
4690         templates for 1.1 FP computational instructions.
4691
4692 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4693
4694         * h8500-dis.c (print_insn_h8500): Address argument is type
4695         bfd_vma.
4696         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4697         Ditto.
4698
4699         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4700         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4701
4702         * sparc-dis.c (compare_opcodes): Move static declaration to
4703         top-level.
4704
4705 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4706
4707         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4708         instruction, remove unimp hack from 'l' argument.
4709
4710 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
4711
4712         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
4713         happy.
4714
4715 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
4716
4717         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4718         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4719         instructions.
4720
4721 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4722
4723         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
4724         arrays of string pointers to 2-d arrays of chars, to save
4725         space.
4726
4727 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
4728
4729         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4730         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4731
4732 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4733
4734         * hppa-dis.c: New file from Utah, adapted to new disassembler
4735         calling interface.
4736         * Makefile.in: Include it.
4737
4738 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4739
4740         * sh-dis.c, sh-opc.h: New files.
4741
4742 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4743
4744         * alpha-dis.c, alpha-opc.h: New files.
4745
4746 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4747
4748         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4749         value.
4750
4751 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
4752
4753         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4754
4755 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
4756
4757         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4758         const.
4759
4760 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
4761
4762         * sparc-dis.c: Use fprintf_func a few places where I forgot,
4763         and double percent signs a few places.
4764
4765         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4766
4767         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4768         Use info->print_address_func not print_address.
4769
4770         * dis-buf.c (generic_print_address): New function.
4771
4772 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4773
4774         * Makefile.in: Add sparc-dis.c.
4775         sparc-dis.c: New file, merges binutils and gdb versions as follows:
4776         From GDB:
4777             Add `add' instruction to the set that get checked
4778             for a preceding `sethi' in order to print an absolute address.
4779             * (print_insn):  Disassembly prefers real instructions.
4780             (is_delayed_branch):  Speed up.
4781             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
4782             Still missing some float ops, and needs testing.
4783             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4784             F_ALIAS.  Use printf, not fprintf, when not passing a file
4785             pointer...
4786             (compare_opcodes): Check that identical instructions have
4787             identical opcodes, complain otherwise.
4788         From binutils:
4789             * New 'm' arg.
4790             * Include reg_names.
4791         From neither:
4792             Use dis-asm.h/read_memory_func interface.
4793
4794 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
4795
4796         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4797           deliberately return non-zero to setjmp from longjmp.  Otherwise
4798           this code fails to compile.
4799
4800 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
4801
4802         * m68k-dis.c:  Fix prototype for fetch_arg().
4803
4804 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4805
4806         * dis-buf.c: New file, for new read_memory_func interface.
4807         Makefile.in (OFILES): Include it.
4808         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4809         Use new read_memory_func interface.
4810
4811 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4812
4813         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4814         * h8500-opc.h: Fix couple of opcodes.
4815
4816 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
4817
4818         * Makefile.in: add dvi & installcheck targets
4819
4820 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
4821
4822         * Makefile.in:  Update for h8500-dis.c.
4823
4824 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4825
4826         * h8500-dis.c, h8500-opc.h: New files
4827
4828 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
4829
4830         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
4831         ../include/dis-asm.h.
4832         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
4833         and ../gdb/m68k-pinsn.c).
4834         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
4835         and ../gdb/i386-pinsn.c).
4836         * m68881-ext.c:  New file.  Moved definition of
4837         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4838         * Makefile.in:  Adjust for new files.
4839         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
4840         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
4841         can be dis-assembled.
4842
4843 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4844
4845         * mips-dis.c (print_insn_arg): Now returns void.
4846
4847 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
4848
4849         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
4850         files that use the macros.
4851
4852 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4853
4854         * mips-dis.c: New file, from gdb/mips-pinsn.c.
4855         * Makefile.in (DIS_LIBS): Added mips-dis.o.
4856         (CFILES): Added mips-dis.c.
4857
4858 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4859
4860         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4861         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4862
4863 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
4864
4865         * Makefile.in:  Improve *clean rules.
4866         * configure.in:  Allow a default host.
4867
4868 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
4869
4870         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4871         files include other sysdep files
4872
4873 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4874
4875         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4876
4877 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
4878
4879         * configure.in:  For host support, use ../bfd/configure.host
4880         so it stays in sync with the ../bfd/hosts database.
4881
4882 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
4883
4884         * configure.in: use cpu-vendor-os triple instead of nested cases
4885
4886 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
4887
4888         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4889         *always* the wrong one.
4890
4891 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4892
4893         * z8kgen.c: added copyright info
4894
4895 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4896
4897         * z8k-dis.c (unparse_instr): prettier tabs
4898         * z8kgen.c -> z8k-opc.h: bug fixes in tables
4899
4900 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
4901
4902         * configure.in:  Add ncr* configuration.
4903         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
4904         picayune ANSI compilers happy.
4905
4906 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
4907
4908         * configure.in (i386):  Make i386 and i486 synonymous for now.
4909         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
4910
4911 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4912
4913         * Makefile.in (install): Fix typo.
4914
4915 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
4916
4917         * Makefile.in (make):  Remove obsolete crud.
4918         (sparc-opc.o):  Avoid Sun Make VPATH bug.
4919
4920 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
4921
4922         * Makefile.in: since there are no SUBDIRS, remove rule and
4923         references of subdir_do.
4924
4925 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4926
4927         * Makefile.in (install): Get the library name right here too.
4928         Don't install bfd.h, since it's unrelated to this library.  No
4929         subdirs to recurse into, either.
4930         (CFILES): The source file has a .c suffix, not .o.
4931
4932         * sparc-opc.c: New file, moved from BFD.
4933         * Makefile.in (OFILES): Build it.
4934
4935 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
4936
4937         * z8k-dis.c: fixed forward refferences of some declarations.
4938
4939 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
4940
4941         * Makefile.in: get the name of the library right
4942
4943 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4944
4945         * z8k-dis.c: knows how to disassemble z8k stuff
4946         * z8k-opc.h: new file full of z8000 opcodes
4947
4948 \f
4949 Local Variables:
4950 version-control: never
4951 End: