2 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
4 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
5 (vif_operands): Update.
6 (vif_get_unpackloc): Delete.
7 (state_vif_unpackloc{,_star_p}): Delete.
8 (dvp_opcode_init_parse): Update.
12 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
14 * vu0.h: Specs changed for VCALLMSR bit pattern.
15 * mips-dis.c: (print_insn_arg) Matching change.
18 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
20 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
23 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
25 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
26 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
27 * configure.in: Define and substitute WIN32LDFLAGS and
29 * aclocal.m4: Rebuild with new libtool.
30 * configure, Makefile.in: Rebuild.
33 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
35 * vu0.h: Corrected bit pattern for VMAXI opcode.
38 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
40 * m32r-opc.c: Regenerate.
43 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
45 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
46 (dvp_expand_macro): Implement.
47 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
48 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
51 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
53 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
54 before trying to copy it.
55 * Makefile.in: Rebuild.
57 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
59 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
62 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
64 * m32r-opc.c: Fix bit patterns for SAT and SATB.
67 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
69 * ns32k-dis.c (bit_extract_simple): New function to extract bits
70 from an arbitrary valid buffer instead of fetching them on demand
72 (invalid_float): use bit_extract_simple() instead of bit_extract().
75 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
77 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
78 * m32r-opc.h: Add extra control registers.
81 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
83 From H.J. Lu <hjl@gnu.org>:
84 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
87 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
89 * Branched binutils 2.9.
92 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
94 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
95 disassembling last 4 bytes of a section.
98 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
100 Fix some gcc -Wall warnings:
101 * arc-dis.c (print_insn): Add casts to avoid warnings.
102 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
103 * d10v-dis.c (dis_long, dis_2_short): Likewise.
105 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
106 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
107 (parse_bc, parse_vfreg, parse_accdest): Likewise.
108 (parse_ffstreg, parse_vif_mode): Likewise.
110 * m10200-dis.c (disassemble): Likewise.
111 * m10300-dis.c (disassemble): Likewise.
112 * ns32k-dis.c (print_insn_ns32k): Likewise.
113 * ppc-opc.c (insert_ral, insert_ram): Likewise.
114 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
115 * cgen-opc.c (cgen_keyword_search_next): Likewise.
116 * d10v-dis.c (dis_long, dis_2_short): Likewise.
118 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
121 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
122 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
123 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
125 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
127 * tic80-dis.c (print_one_instruction): Likewise.
129 * w65-dis.c (print_operand): Likewise.
130 * z8k-dis.c (fetch_data): Likewise.
131 * a29k-dis.c: Add return type for find_byte_func_type.
132 * arc-opc.c: Include <stdio.h>. Remove declarations of
133 insert_multshift and extract_multshift.
135 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
137 (extract_value): Fully parenthesize expression.
140 * dvp-opc.c: Include <ctype.h>.
141 (print_sdest): Add default case to switch.
143 * h8500-dis.c (print_insn_h8500): Initialize local variables.
144 * h8500-opc.h (h8500_table): Fully bracket initializer.
145 * w65-opc.h (optable): Likewise.
146 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
147 * i386-dis.c (OP_E): Initialize local variables.
148 * m10200-dis.c (print_insn_mn10200): Likewise.
149 * mips-dis.c (print_insn_mips16): Likewise.
150 * sh-dis.c (print_insn_shx): Likewise.
151 * v850-dis.c (print_insn_v850): Likewise.
152 * ns32k-dis.c (print_insn_arg): Declare.
153 (get_displacement, invalid_float): Declare.
154 (list_search, sign_extend, flip_bytes): Declare return type.
155 (get_displacement): Likewise.
156 (print_insn_arg): Likewise. Make d int. Fix sprintf format
158 (print_insn_ns32k): Make i unsigned.
159 (invalid_float): Make static. Declare type of val.
160 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
161 on each for iteration.
162 * tic30-dis.c (get_indirect_operand): Likewise.
163 * z8k-dis.c (print_insn_z8001): Declare return type.
164 (print_insn_z8002): Likewise.
165 (unparse_instr): Fix sprintf format strings.
167 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
169 * mips-opc.c: Add "sync.l" and "sync.p".
172 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
174 * dvp-opc.c (extract_vif_datalen): Rewrite.
175 (vif_insn_len): Perform 0->max+1 conversion for direct length.
177 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
179 * dvp-dis.c (print_insn): Print unpack address in hex.
180 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
181 Don't skip over '*', just record it.
182 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
183 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
184 Don't skip over '*', just record it.
185 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
186 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
187 (vif_opcodes): Likewise.
188 (state_vif_{mpg,unpack}loc_star_p): New static locals.
189 (vif_macros,vif_macro_count): New globals.
190 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
191 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
192 (vif_get_wl_cl): New function.
193 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
196 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
198 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
199 default m68k variant to recognize.
201 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
202 (ctrl, cobr, mem, ea): Likewise.
203 (print_addr): Likewise. Remove cast.
204 (ea): Cast argument of print_addr to bfd_vma.
206 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
208 (cgen_parse_unsigned_integer): Likewise.
209 (cgen_parse_address): Likewise.
211 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
213 * i960-dis.c (ctrl): Add full braces to structure initialization.
214 (cobr, mem, reg): Likewise.
215 (ea): Correct parenthesization in expression.
217 * cgen-asm.c: Include <ctype.h>.
218 (build_asm_hash_table): Remove unused local variable i.
219 (cgen_parse_keyword): Add casts to avoid warnings.
221 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
222 symbol. Fix indentation.
223 (print_insn_little_arm): Likewise.
226 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
228 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
233 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
235 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
240 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
242 * dvp-opc.c (vif_operand_datalen_special): New global.
246 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
248 * vu0.h (vcallms): Use 'O' for call target operand.
249 * mips-dis.c (print_insn_arg): Handle 'O'.
252 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
254 * configure.in: Use AM_DISABLE_SHARED.
255 * aclocal.m4, configure: Rebuild with libtool 1.2.
258 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
260 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
265 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
267 These patches are courtesy of Jonathan Walton and Tony Thompson
268 (athompso@cambridge.arm.com).
270 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
273 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
274 both the offset and the label closest to the destination.
277 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
279 * vu0.h: New file with cop2/vu0 instructions.
280 * mips-opc.c: Include vu0.h.
281 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
283 (print_insn_mips): Do not emit a tab after an instruction if the
284 first arg is an instruction completer (&). If the next arg is an
285 escape character (%), then print the next arg verbatim.
286 * Makefile.am (mips-opc.lo): Depend on vu0.h
290 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
292 * dvp-opc.c (vif_opcodes): Add stcycl.
294 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
296 * dvp-dis.c (print_dma): Change length from 16 to 8.
299 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
301 * m32r-opc.h: Regenerate.
304 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
306 * dvp-opc.c (print_dest1): Print dest spec again.
307 (print_vfreg,print_accdest): Likewise.
308 (vif_unpack_len): Round result up to word boundary.
311 start-sanitize-vr4320
312 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
314 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
316 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
318 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
323 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
325 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
326 (print_insn): Do mask comparison on proper opcode word.
327 Print unsigned values in hex.
328 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
329 (parse_bc): Catch missing dest.
330 (parse_vfreg): Replace atoi call with strtol.
331 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
332 (parse_bcftreg,parse_ffstreg): Handle missing dest.
333 (extract_gif_eop): New function.
334 (gif_operands): Update eop entry.
335 (VGIFOP,VGIFNREGS): Fix calcs.
336 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
337 (gif_regs): Add entry for unused 11 case.
338 (print_gif_regs): Print empty list instead of nothing.
339 (extract_gif_nloop): Fix value calc.
340 (print_gif_nloop): Always print value, even if 0.
341 (insert_vif_wlcl,extract_vif_wlcl): New functions.
342 (vif_operands): Use them for wl,cl fields.
343 (state_vif_wl,state_vif_cl): New static locals.
344 (parse_vif_mode): Handle numeric args.
345 (vif_unpack_len_value,vif_unpack_len): New functions.
346 (vif_insn_len): Call vif_unpack_len.
349 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
351 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
353 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
355 * cgen-asm.in: Move insertion of generated routines to top of file.
356 (insert_normal): Add prototype. Delete `shift' arg.
357 * cgen-dis.in: Move insertion of generated routines to top of file.
358 (extract_normal): Add prototype. Delete `shift' arg.
359 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
360 (print_keyword): Add prototype. Fix type of `attrs' arg.
362 start-sanitize-vr4320
363 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
365 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
366 * mips-opc.c ("mac","dmac") : Added 4320 insns.
369 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
371 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
372 assume that info->symbols is non-empty.
374 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
376 * alpha-opc.c (cvtqs) There is no such thing.
377 (cvttq): Missing most of the /*d variants.
380 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
382 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
384 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
385 (r5900/msub.s): Takes three operands, not four. Fix opcode.
389 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
391 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
392 delayed branches or jumps.
396 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
398 * dvp-opc.c (vif_operands): Add unpack[u] support.
399 (vif_opcodes): Ditto.
400 (*_vif_imrubits): Renamed from *_vif_imrbits.
402 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
404 * dvp-dis.c (print_insn): Handle word number.
405 Handle mips address vs vu address.
406 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
407 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
408 ({insert,extract}_dma_addr): Fix word ofset.
409 ({insert,print}_gif_regs): Fix encode/decode.
412 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
414 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
416 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
417 * tic30-dis.c (print_branch): Likewise.
419 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
420 * dvp-dis.c (dvp_info_mach_type): New function.
421 (print_insn_dvp): Call it.
422 (print_vif): Return length of 4 if mpg or direct insn so following
423 insns get properly disabled.
424 (print_gif): Fix word order.
425 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
426 (gif_operands): Fix word order.
427 (gif_opcodes): Likewise.
428 ({insert,extract,print}_gif_regs): Likewise.
429 (gif_regs): Add new register number/name changes.
430 (dma_opcodes): Add dmarefe insn.
433 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
435 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
436 saved_symbol code as it is no longer needed.
438 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
440 * cgen-asm.c: Include symcat.h.
441 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
443 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
446 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
448 * dvp-opc.c (extra_dma_flags): Fix typos.
449 (dma_operands): Fix word numbers.
450 (dma_opcodes): Likewise.
451 ({insert,extract}_dma_flags): Likewise.
454 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
456 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
459 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
461 * dvp-dis.c (print_gif): Complete.
462 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
463 (state_gif_{nregs,regs,nloop}): New static locals.
465 (dvp_opcode_init_{parse,print}): Init gif state locals.
466 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
467 (vif_insn_len): Handle `unpack'.
468 ({insert,extract}_dma_flags): Complete.
472 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
474 * mips-opc.c (mula.s): Renamed from multa.s.
477 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
479 * m32r-opc.[ch]: Regenerate.
482 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
484 * dvp-opc.c (dma_operands): Rewrite.
485 (dma_operand_{count,addr}): New globals.
486 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
487 (insert_dma_addr): Insert value into insn.
488 (extract_dma_addr): Extract value from insn.
490 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
492 * dvp-dis.c (print_vu): Handle loi insns.
493 (print_insn): Likewise.
494 * dvp-opc.c (vu_lower_opcodes): Add "loi".
495 (vu_operands): Make LDEST1 a FAKE operand.
496 (parse_dest1): Allow elided argument.
497 (print_dest1): Don't print the argument.
499 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
501 * dvp-opc.c (parse_vfreg): Dest spec is optional.
502 (print_vfreg): Don't print dest spec.
503 (parse_accdest): Dest spec is optional.
504 (print_accdest): Don't print dest spec.
507 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
509 * Makefile.am (CGENFILES): Update.
510 * Makefile.in: Regenerate.
511 * cgen-asm.in (insert_normal): Result is error message now.
512 Validate value to be inserted.
513 (insert_insn_normal): Result is error message now.
514 (@arch@_cgen_assemble_insn): Update.
515 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
516 arguments. Don't perform validation here.
517 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
519 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
521 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
522 operand instance list.
523 * m32r-opc.c: Regenerate.
525 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
527 * Makefile.am (AUTOMAKE_OPTIONS): Define.
528 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
530 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
532 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
534 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
536 * configure.in: Get the version number from BFD.
537 * configure: Rebuild.
539 From H.J. Lu <hjl@gnu.org>:
540 * Makefile.am (libopcodes_la_LDFLAGS): Define.
541 * Makefile.in: Rebuild.
543 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
545 * m32r-opc.c: Regenerate.
546 * m32r-opc.h: Regenerate.
548 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
550 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
551 Ignore ALIAS insns if asked to.
552 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
553 * m32r-opc.c: Regenerate.
556 * dvp.opc.c: Nicely format opcode tables.
557 (vu_operands): New element UFLAGS.
558 (parse_uflags,print_uflags): New functions.
559 (vu_upper_opcodes): Add UFLAGS to all insns.
562 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
564 Fix rac to accept only a0:
565 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
566 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
567 Introduce OPERAND_GPR.
568 * d10v-dis.c (print_operand): Likewise.
570 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
572 * cgen-opc.in: New file.
573 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
574 * Makefile.am (CGENFILES): Add cgen-opc.in.
575 * Makefile.in: Regenerate.
577 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
578 (cgen_hw_lookup): Make result const.
580 * cgen-dis.in (*): Use PTR instead of void *.
581 (print_insn): Delete unused vars `i', `syntax'.
583 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
586 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
588 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
589 (vif_opcodes): Update renamed insns.
590 * dvp-dis.c (*): Likewise.
593 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
595 * configure, aclocal.m4: Rebuild with new libtool.
598 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
600 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
601 instructions use a PC relative branch, not absolute.
604 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
606 * configure.in: Set libtool_enable_shared rather than
607 libtool_shared. Remove diversion hack.
608 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
610 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
612 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
613 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
615 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
617 * tic30-dis.c: New file.
618 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
619 * configure.in: Handle bfd_tic30_arch.
620 * Makefile.am: Rebuild dependencies.
621 (CFILES): Add tic30-dis.c
622 (ALL_MACHINES): Add tic30-dis.lo.
623 * configure, Makefile.in: Rebuild.
626 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
628 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
629 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
630 macwhi-a and macwlo-a instructions.
634 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
636 * dvp-opc.c, fixed encoding of a bunch of instructions to
637 be consistent with the asmvu assembler (and inconsistent
638 with the specification).
640 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
642 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
643 in the opcode table. The pkemscalf instruction must come first.
645 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
647 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
650 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
652 * m32r-opc.h (HAVE_CPU_M32R): Define.
655 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
657 * dvp-dis.c, dvp-opc.c: New files.
658 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
659 * configure: Regenerate.
660 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
661 (dvp-dis.lo,dvp-opc.lo): Add rules for.
662 (mips-dis.lo): Compile with @archdefs@.
663 * Makefile.in: Regenerate.
664 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
665 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
668 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
670 * v850-opc.c (insertion routines): If both alignment and size is
671 wrong then report this.
673 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
675 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
676 Only recognize instructions for the current target_processor.
678 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
680 * d10v-dis.c (PC_MASK): Correct value.
681 (print_operand): If there's a reloc, don't calculate the
682 address because they could be in different sections.
684 start-sanitize-cygnus
685 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
687 * cgen.sh: Rewrite to be like simulator's version.
688 * Makefile.am (cgen): Update call to cgen.sh.
689 * Makefile.in: Regenerate
692 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
694 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
695 instruction after the 4650's "mul" instruction; nobody's using the
696 4010 these days. If object files someday indicate which processor
697 variant they're intended for, we can do a better job at this.
700 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
702 * mips-opc.c (c.lt.s): Add r5900 variant.
706 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
708 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
709 table provided entry size. Use CGEN_INSN_MNEMONIC.
710 (cgen_parse_keyword): Rewrite.
711 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
712 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
713 * cgen-opc.c: Clean up pass over `struct foo' usage.
714 (cgen_keyword_lookup_value): Handle "" entry.
715 (cgen_keyword_add): Likewise.
716 start-sanitize-cygnus
717 * Makefile.am: Add cgen support.
718 * Makefile.in: Regenerate.
719 * configure.in: Add cgen support.
720 * configure: Regenerate.
721 * aclocal.m4: Regenerate.
722 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
725 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
727 * mips-opc.c: Add FP_D to s.d instruction flags.
729 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
731 * m68k-opc.c (halt, pulse): Enable them on the 68060.
734 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
736 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
737 PC relative offset forms before the 15 bit forms. An assembler command
738 line option now chooses the default.
742 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
744 * mips-opc.c: Add many missing r5900 instructions.
748 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
750 * d30v-opc.c (d30v_opcode_table): Set new flags bits
751 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
754 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
756 * configure: Only build libopcodes shared if --enable-shared's value
757 was `yes', or was set to `*opcodes*'.
758 * aclocal.m4: Likewise.
759 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
760 original source of this bit of code. It's not clear what the best fix
764 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
766 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
769 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
771 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
772 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
773 offset forms before the 15 bit forms, to default to the long forms.
776 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
778 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
780 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
782 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
783 symbol if none is present.
784 (print_insn_big_arm): Prevent examination of stored symbol if
787 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
789 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
791 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
793 * disassemble.c: Remove disasm_symaddr() function.
795 * arm-dis.c: Use info->symbol instead of info->flags to determine
796 if disassmbly should be in Thumb or Arm mode.
798 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
800 * arm-dis.c: Add support for disassembling Thumb opcodes.
801 (print_insn_thumb): New function.
803 * disassemble.c (disasm_symaddr): New function.
805 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
806 (thumb_opcodes): Table of Thumb opcodes.
808 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
810 * m68k-opc.c (btst): Change Dd@s to Dd;b.
812 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
813 and 'v' as operand types.
815 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
817 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
818 <olivier.carmona@di.epfl.ch>.
819 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
820 which has a two word opcode with a one word argument.
823 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
825 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
826 unsigned, not signed.
827 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
830 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
832 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
833 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
834 (ftrv): Slay the cut-and-paste monster.
836 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
838 * d10v-dis.c (print_operand):
839 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
841 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
843 * d10v-opc.c (OPERAND_FLAG): Split into:
844 (OPERAND_FFLAG, OPERAND_CFLAG) .
848 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
850 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
851 field for all INSN_MACRO's.
854 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
856 * mips-opc.c (sync,cache): These are 3900 insns.
858 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
860 sh-opc.h (sh_table): Remove ftst/nan.
862 start-sanitize-vr5400
863 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
865 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
866 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
868 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
872 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
874 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
875 Add tx49 insns and configury.
878 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
880 * mips-opc.c (ffc, ffs): Fix mask.
883 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
885 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
889 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
891 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
892 start-sanitize-vr5400
893 Added VR5400 instructions.
894 (N5): New cpu-id macro.
896 (WR_HILO, RD_HILO, MOD_HILO): New macros.
898 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
900 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
901 (WR_HILO, RD_HILO, MOD_HILO): New macros.
903 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
905 * v850-dis.c (disassemble): Replace // with /* ... */
907 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
909 * sparc-opc.c: Add wr & rd for v9a asr's.
910 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
911 (v9a_asr_reg_names): New variable.
912 Patch from David Miller <davem@vger.rutgers.edu>.
914 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
916 * sparc-opc.c (v9notv9a): New insn type.
917 (IMPDEP): Move to the end to not conflict with edge8 et al.
918 Patch from David Miller <davem@vger.rutgers.edu>.
920 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
922 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
924 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
926 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
928 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
930 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
931 of disassemble_info structure to determine if an overlay address
932 has a matching symbol in low memory.
934 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
935 new symbol_at_address_func field in disassemble_info structure.
937 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
939 * v850-opc.c (extract_d22): Use signed arithmatic.
941 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
943 * mips-opc.c: Three op mult is not an ISA insn.
945 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
947 * mips-opc.c: Fix formatting.
949 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
951 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
952 than assuming that char is signed. Explicitly sign extend 16 bit
953 values, rather than assuming that short is 16 bits.
954 (OP_sI, OP_J, OP_DIR): Likewise.
957 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
959 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
963 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
965 * v850-opc.c: Fix typo in comment.
967 * v850-dis.c (disassemble): Add test of processor type when
970 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
972 * configure.in: Use a diversion to set enable_shared before the
973 arguments are parsed.
974 * configure: Rebuild.
976 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
978 * m68k-opc.c (TBL1): Use ! rather than `.
979 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
981 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
983 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
985 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
987 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
990 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
991 * aclocal.m4: Rebuild with new libtool.
992 * configure: Rebuild.
995 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
997 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1000 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1002 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1004 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1006 * v850-opc.c (v850_opcodes): Further rearrangements.
1009 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1011 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1014 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1016 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1019 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1021 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1023 * mips16-opc.c: Added mips16 sdbbp.
1026 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1028 * v850-opc.c: Initialise processors field of v850_opcode structure.
1031 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1033 Merge changes from Martin Hunt:
1035 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1037 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1038 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1039 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1041 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1043 * d30v-dis.c (print_insn): First operand of d*i (delayed
1044 branch) instructions is relative.
1046 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1047 (d30v_operand_table): Add IMM6S3 type.
1048 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1050 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1051 and cmp instructions.
1053 * d30v-opc.c: Correct entries for repeat*, and sat*.
1054 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1055 types. Correct several formats.
1057 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1059 * d30v-opc.c (pre_defined_registers): Change control registers.
1061 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1062 SHORT_C2. Manual was incorrect.
1064 * d30v-dis.c (lookup_opcode): Return value now indicates
1065 if an opcode has a short and a long form. Used for deciding
1066 to append a ".s" or ".l".
1067 (print_insn): Append a ".s" to an instruction if it is
1068 the short form and ".l" if it is a long form. Do not append
1069 anything if the instruction has only one possible size.
1071 * d30v-opc.c: Change mulx2h to require an even register.
1072 New form: SHORT_A2; a SHORT_A form that needs an even
1073 register as the first operand.
1075 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1076 instruction was not being disassembled if there were an odd
1077 number of instructions.
1079 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1082 start-sanitize-v850e
1083 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1085 * v850-dis.c (disassemble): Improved display of register lists.
1088 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1090 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1091 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1092 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1093 fandnot1s, fandnot2s.
1095 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1097 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1099 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1101 * cgen-asm.c (cgen_parse_address): New argument resultp.
1102 All callers updated.
1103 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1105 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1107 * mn10200-dis.c (disassemble): PC relative instructions are
1108 relative to the next instruction, not the current instruction.
1110 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1112 * v850-dis.c (disassemble): Only signed extend values that are not
1113 returned by extract functions.
1114 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1116 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1118 * v850-opc.c: Update comments. Remove use of
1119 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1121 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1123 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1125 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1127 * configure: Rebuilt with latest devo autoconf for NT support.
1129 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1131 * v850-dis.c (disassemble): Use curly brace syntax for register
1134 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1135 where r0 is being used as a destination register.
1137 start-sanitize-v850e
1138 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1140 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1143 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1145 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1146 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1147 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1148 Add insns to access SGR and DBR.
1149 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1151 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1153 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1155 start-sanitize-v850e
1156 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1158 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1159 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1162 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1164 * configure (cgen_files): Add support for v850e target.
1165 * configure.in (cgen_files): Add support for v850e target.
1167 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1169 * configure (cgen_files): Add support for v850ea target.
1170 * configure.in (cgen_files): Add support for v850ea target.
1173 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1175 * configure.in (bfd_arc_arch): Add.
1176 * configure: Rebuild.
1177 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1178 * Makefile.in: Rebuild.
1179 * arc-dis.c, arc-opc.c: New files.
1180 * disassemble.c (ARCH_all): Define ARCH_arc.
1181 (disassembler): Add ARC support.
1183 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1185 start-sanitize-v850e
1186 * v850-dis.c (disassemble): Add support for v850EA instructions.
1188 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1189 (v850_opcodes): Add v850EA instructions.
1191 * v850-dis.c (disassemble): Add support for v850E instructions.
1193 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1194 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1195 insert_spe, extract_spe): New Functions.
1196 (v850_opcodes): Add v850E instructions.
1199 * v850-opc.c: Reorganised and re-layed out to improve readability
1202 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1204 * configure: Rebuild with autoconf 2.12.1.
1206 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1208 * aclocal.m4, configure: Rebuild with new automake patches.
1210 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1212 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1213 * acinclude.m4: Just include acinclude.m4 from BFD.
1214 * aclocal.m4, configure: Rebuild.
1216 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1218 * Makefile.am: New file, based on old Makefile.in.
1219 * acconfig.h: New file.
1220 * acinclude.m4: New file.
1221 * stamp-h.in: New file.
1222 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1223 Removed shared library handling; now handled by libtool. Replace
1224 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1225 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1226 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1227 handling in AC_OUTPUT.
1228 * dep-in.sed: Change .o to .lo.
1229 * Makefile.in: Now built with automake.
1230 * aclocal.m4: Now built with aclocal.
1231 * config.in, configure: Rebuild.
1233 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1235 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1237 start-sanitize-r5900
1238 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1240 * mips-opc.c: Fix coding of mtsa.
1243 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1245 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1247 * sparc-dis.c (sorted_opcodes): New static local.
1248 (struct opcode_hash): `opcode' is pointer to const element.
1249 (build_hash): First arg is now table of sorted pointers.
1250 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1251 (compare_opcodes): Update.
1253 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1255 * cgen-opc.c: #include <ctype.h>.
1256 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1257 Handle case insensitive hashing.
1258 (hash_keyword_value): Change type of `value' to unsigned int.
1260 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1262 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1263 precision FP, mark it as such. Likewise for double precision
1264 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1266 start-sanitize-r5900
1267 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1270 start-sanitize-r5900
1271 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1273 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1274 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1277 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1279 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1281 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1282 nesting depth when all the macros are expanded.
1284 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1286 * sparc-opc.c: The fcmp v9a instructions take an integer register
1287 as a destination, not a floating point register. From Christian
1288 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1290 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1292 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1293 syntax. From Roman Hodek
1294 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1296 * i386-dis.c (twobyte_has_modrm): Fix pand.
1298 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1300 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1302 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1304 * arm-dis.c: Add prototypes for arm_decode_shift and
1307 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1309 * mips-opc.c: Add r3900 insns.
1311 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1313 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1314 print delay slot instructions on the same line. When using a PC
1315 relative load, add a comment with the value being loaded if it can
1318 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1320 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1321 to pushS/popS for segment regs and byte constant so that
1322 pushw/popw printed when in 16 bit data mode.
1324 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1325 print cbtw, cwtd in 16 bit data mode.
1326 * i386-dis.c (putop): extra case W to support above.
1328 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1329 address size prefix in 16 bit address mode.
1331 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1333 * sh-dis.c: Reindent. Rename local variable fprintf to
1336 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1338 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1340 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1342 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1344 * mips16-opc.c (mip16_opcodes): same.
1346 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1348 * m68k-opc.c (moveb): Change $d to %d.
1350 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1352 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1353 (twobyte_has_modrm): Likewise.
1355 (OP_MMX, OP_EM, OP_MS): New static functions.
1357 * i386-dis.c: Revert patch of April 4. The output now matches
1360 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1362 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1365 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1367 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1369 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1371 * Makefile.in (install): Depend upon installdirs.
1372 (installdirs): New target.
1374 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1376 From Thomas Graichen <graichen@rzpd.de>:
1377 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1378 * configure: Rebuild.
1380 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1382 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1383 Delete string{,s}.h support.
1385 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1387 * cgen-asm.c (cgen_parse_operand_fn): New global.
1388 (cgen_parse_{{,un}signed_integer,address}): Update call to
1389 cgen_parse_operand_fn.
1390 (cgen_init_parse_operand): New function.
1391 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1392 from cgen_asm_init_parse.
1393 (m32r_cgen_assemble_insn): New operand `errmsg'.
1394 Delete call to as_bad, return error message to caller.
1395 (m32r_cgen_asm_hash_keywords): #if 0 out.
1397 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1399 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1401 [case 'J']: Fix typo in register name.
1403 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1405 * configure.in: Substitute SHLIB_LIBS.
1406 * configure: Rebuild.
1407 * Makefile.in (SHLIB_LIBS): New variable.
1408 ($(SHLIB)): Use $(SHLIB_LIBS).
1410 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1412 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1414 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1416 * disassemble.c (disassembler): Handle m32r.
1418 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1420 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1421 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1422 * Makefile.in (CFILES): Add them.
1423 (ALL_MACHINES): Add them.
1424 (dependencies): Regenerate.
1425 * configure.in (cgen_files): New variable.
1426 (bfd_m32r_arch): Add entry.
1427 * configure: Regenerate.
1429 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1431 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1432 * configure: Rebuild.
1434 * Makefile.in: Rebuild dependencies.
1436 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1438 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1441 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1443 * Branched binutils 2.8.
1445 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1447 * m10200-dis.c: Rename from mn10200-dis.c.
1448 * m10200-opc.c: Rename from mn10200-opc.c.
1449 * m10300-dis.c: Rename from mn10300-dis.c
1450 * m10300-opc.c: Rename from mn10300-opc.c.
1451 * Makefile.in: Update accordingly.
1453 * mips16-opc.c: Add mul and dmul macros.
1455 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1457 * makefile.vms: Update CFLAGS, add clean target.
1459 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1461 * mips-opc.c: Add "wait". From Ralf Baechle
1462 <ralf@gnu.ai.mit.edu>.
1464 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1465 * configure, config.in: Rebuild.
1466 * sysdep.h: Include <stdlib.h> if it exists.
1467 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1469 * Makefile.in: Rebuild dependencies.
1471 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1473 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1474 Andrew Bray <andy@madhouse.demon.co.uk>.
1476 * mips-opc.c: Add cast when setting mips_opcodes.
1478 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1480 * v850-dis.c (disassemble): Fix sign extension problem.
1481 * v850-opc.c (extract_d*): Fix sign extension problems to make
1482 disassembly calculate branch offsets correctly.
1484 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1486 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1488 * mips-opc.c: Add dctr and dctw.
1491 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1493 * d30v-dis.c (print_insn): Change the way signed constants
1496 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1498 * Makefile.in (BFD_H): New variable.
1499 (HFILES): New variable.
1500 (CFILES): Add all C files.
1501 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1502 Delete old dependencies, and build new ones.
1503 * dep-in.sed: New file.
1505 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1507 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1509 start-sanitize-coldfire
1510 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1512 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1515 end-sanitize-coldfire
1516 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1518 * mn10200-opc.c: Change "trap" to "syscall".
1519 * mn10300-opc.c: Add new "syscall" instruction.
1521 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1523 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1524 mulul insns on the coldfire.
1526 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1528 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1529 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1530 (print_insn_little_arm): Likewise.
1532 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1534 Based on patches from H.J. Lu <hjl@lucon.org>:
1535 * i386-dis.c (fetch_data): Add prototype.
1536 * m68k-dis.c (fetch_data): Add prototype.
1537 (dummy_print_address): Add prototype. Make static.
1538 * ppc-opc.c (valid_bo): Add prototype.
1539 * sparc-dis.c (build_hash_table): Add prototype.
1540 (is_delayed_branch, compute_arch_mask): Add prototypes.
1541 (print_insn_sparc): Make several local variables const.
1542 (compare_opcodes): Change arguments to const PTR. Add prototype.
1543 * sparc-opc.c (arg): Change name field to be const.
1544 (lookup_name, lookup_value): Add prototypes. Change table and
1545 name parameters to be const.
1546 (sparc_encode_asi): Change name parameter to be const.
1547 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1548 (sparc_encode_sparclet_cpreg): Likewise.
1549 (sparc_decode_asi): Change return type to be const.
1550 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1551 (sparc_decode_sparclet_cpreg): Likewise.
1553 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1555 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1556 Solaris doesn't like the combined options, and the -f is
1558 (stamp-tshlink, install): Likewise.
1560 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1562 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1565 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1567 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1569 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1571 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1574 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1576 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1578 start-sanitize-tic80
1579 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1581 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1583 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1585 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1588 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1590 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1591 floatformat_to_double to make portable.
1592 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1595 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1597 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1598 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1600 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1602 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1603 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1605 start-sanitize-tic80
1606 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1608 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1609 (OFF_SL_BR_SCALED): ... to this, and added the flag
1610 TIC80_OPERAND_BASEREL to the flags word.
1611 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1615 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1617 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1618 Change mips_opcodes from const array to a pointer,
1619 and change bfd_mips_num_opcodes from const int to int,
1620 so that we can increase the size of the mips opcodes table
1623 start-sanitize-tic80
1624 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1626 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1627 store BITNUM values in the table in one's complement form
1628 to match behavior when assembler is given a raw numeric
1629 value for a BITNUM operand.
1630 * tic80-dis.c (print_operand_bitnum): Ditto.
1634 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1636 * d30v-opc.c: Removed references to FLAG_X.
1639 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1641 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1644 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1646 * Makefile.in: Added d30v object files.
1647 * configure: (bfd_d30v_arch) Rebuilt.
1648 * configure.in: (bfd_d30v_arch) Added new case.
1649 * d30v-dis.c: New file.
1650 * d30v-opc.c: New file.
1651 * disassemble.c (disassembler) Add entry for d30v.
1654 start-sanitize-tic80
1655 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1657 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1658 representations for the floating point BITNUM values.
1660 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1662 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1663 in the table in one's complement form, as they appear in the
1665 (tic80_symbol_to_value): Use macros to access predefined
1667 (tic80_value_to_symbol): Ditto.
1668 (tic80_next_predefined_symbol): New function.
1669 * tic80-dis.c (print_operand_bitnum): Remove code that did
1670 one's complement for BITNUM values.
1673 start-sanitize-r5900
1674 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1676 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1679 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1681 * makefile.vms: Remove 8 bit characters. Update to latest
1684 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1686 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1688 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1690 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1691 (IMM24_PCREL): Likewise.
1693 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1695 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1696 address for an extended PC relative instruction that is not a
1699 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1701 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1704 start-sanitize-tic80
1705 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1707 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1708 (tic80_opcodes): Sort entries so that long immediate forms
1709 come after short immediate forms, making it easier for
1710 assembler to select the right one for a given operand.
1713 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1715 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1717 (print_insn_mips16): Likewise.
1719 start-sanitize-r5900
1720 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1722 * mips-opc.c: add r5900.
1725 start-sanitize-tic80
1726 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1728 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1729 a symbol class that restricts translation to just that
1730 class (general register, condition code, etc).
1732 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1734 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1735 and REG_DEST_E for register operands that have to be
1736 an even numbered register. Add REG_FPA for operands that
1737 are one of the floating point accumulator registers.
1738 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1739 (tic80_opcodes): Change entries that need even numbered
1740 register operands to use the new operand table entries.
1741 Add "or" entries that are identical to "or.tt" entries.
1744 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1746 * mips16-opc.c: Add new cases of exit instruction for
1748 * mips-dis.c (print_mips16_insn_arg): Display floating point
1749 registers in operands of exit instruction. Print `$' before
1750 register names in operands of entry and exit instructions.
1752 start-sanitize-tic80
1753 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1755 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1756 pairs for all predefined symbols recognized by the assembler.
1757 Also used by the disassembling routines.
1758 (tic80_symbol_to_value): New function.
1759 (tic80_value_to_symbol): New function.
1760 * tic80-dis.c (print_operand_control_register,
1761 print_operand_condition_code, print_operand_bitnum):
1762 Remove private tables and use tic80_value_to_symbol function.
1765 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1767 * d10v-dis.c (print_operand): Change address printing
1768 to correctly handle PC wrapping. Fixes PR11490.
1770 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1772 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1775 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1777 * mips-dis.c (print_insn_mips16): Set insn_info information.
1778 (print_mips16_insn_arg): Likewise.
1780 * mips-dis.c (print_insn_mips16): Better handling of an extend
1781 opcode followed by an instruction which can not be extended.
1783 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1785 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1786 coldfire moveb instruction to not allow an address register as
1787 destination. Although the documentation does not indicate that
1788 this is invalid, experiments uncovered unexpected behavior.
1789 Added a comment explaining the situation. Thanks to Andreas
1790 Schwab for pointing this out to me.
1792 start-sanitize-tic80
1793 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1795 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1796 entries are presorted so that entries with the same mnemonic are
1797 adjacent to each other in the table. Sort the entries for each
1798 instruction so that this is true.
1801 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1803 * m68k-dis.c: Include <libiberty.h>.
1804 (print_insn_m68k): Sort the opcode table on the most significant
1805 nibble of the opcode.
1807 start-sanitize-tic80
1808 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1810 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1811 "vsub", "vst", "xnor", and "xor" instructions.
1812 (V_a1): Renamed from V_a, msb of accumulator reg number.
1813 (V_a0): Add macro, lsb of accumulator reg number.
1815 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1817 * tic80-dis.c (print_insn_tic80): Broke excessively long
1818 function up into several smaller ones and arranged for
1819 the instruction printing function to be callable recursively
1820 to print vector instructions that have both a load and a
1821 math instruction packed into a single opcode.
1822 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1823 to explain why it comes after the other vector opcodes.
1826 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1828 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1829 move insns to handle immediate operands.
1831 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1833 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1834 fix operand mask in the "moveml" entries for the coldfire.
1836 start-sanitize-tic80
1837 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1839 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1840 New macros for building vector instruction opcodes.
1841 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1842 FMT_LI, which were unused. The field is now a flags field.
1843 Remove some opcodes that are possible, but illegal, such
1844 as long immediate instructions with doubles for immediate
1845 values. Add "vadd" and "vld" instructions.
1847 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1849 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1850 the order more logical. Move the shift alias instructions ("rotl",
1851 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1852 interspersed with the regular sr.x and sl.x instructions. Add
1853 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1854 "sub", "subu", "swcr", and "trap".
1856 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1858 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1859 (OFF_SL_PC): Renamed from OFF_SL.
1860 (OFF_SS_BR): New operand type for base relative operand.
1861 (OFF_SL_BR): New operand type for base relative operand.
1862 (REG_BASE): New operand type for base register operand.
1863 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1864 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1865 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1867 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1868 10 char field, padded with spaces on rhs, rather than a string
1869 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1870 than old TIC80_OPERAND_RELATIVE. Add support for new
1871 TIC80_OPERAND_BASEREL flag bit.
1873 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1875 * tic80-dis.c (print_insn_tic80): Print floating point operands
1877 * tic80-opc.c (SPFI): Add single precision floating point
1878 immediate operand type.
1879 (ROTATE): Add rotate operand type for shifts.
1880 (ENDMASK): Add for shifts.
1881 (n): Macro for the 'n' bit.
1882 (i): Macro for the 'i' bit.
1883 (PD): Macro for the 'PD' field.
1884 (P2): Macro for the 'P2' field.
1885 (P1): Macro for the 'P1' field.
1886 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1890 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1892 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1893 adding in current address for pc-relative operands.
1895 start-sanitize-tic80
1896 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1898 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1899 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1900 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1901 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1902 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1903 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1904 (REG_SCALED, LSI_SCALED): New operand types.
1905 (E): New macro for 'E' bit at bit 27.
1906 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1907 opcodes, including the various size flavors (b,h,w,d) for
1908 the direct load and store instructions.
1910 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1912 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1914 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1915 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1916 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1917 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1918 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1919 masks with "MASK_* & ~M_*" to get the M bit reset.
1920 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1922 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1924 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1925 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1926 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1928 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1929 CC, SICR, and LICR table entries.
1930 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1931 "bcnd", and "brcr" opcodes.
1934 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1936 * ppc-opc.c (powerpc_operands): Make comment match the
1937 actual fields (no shift field).
1938 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1939 start-sanitize-tic80
1940 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1941 partial implementation, work in progress.
1942 * tic80-opc.c (tic80_operands): Begin construction operands table.
1943 (tic80_opcodes): Continue populating opcodes table and start
1944 filling in the operand indices.
1945 (tic80_num_opcodes): Add this.
1948 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1950 * m68k-opc.c: Add #B case for moveq.
1952 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1954 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1955 before they are used.
1957 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1959 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1960 for "breakpoint" instruction.
1962 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1964 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1965 (dep): Use ALL_CFLAGS rather than CFLAGS.
1967 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1969 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1972 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1974 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1975 start-sanitize-tic80
1976 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1979 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1981 * mips16-opc.c: Add "abs".
1983 start-sanitize-tic80
1984 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1986 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1987 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1988 (disassembler): Add bfd_arch_tic80 support to set disassemble
1989 to print_insn_tic80.
1990 * tic80-dis.c (print_insn_tic80): Add stub.
1992 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1994 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1995 * configure: Regenerate with autoconf.
1996 * tic80-dis.c: Add file.
1997 * tic80-opc.c: Add file.
2000 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2002 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2004 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2006 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2007 (mn10200_opcodes): Use it for some logicals and btst insns.
2008 Add "break" and "trap" instructions.
2010 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2012 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2014 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2016 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2017 relative load or add now depends upon whether the instruction is
2020 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2022 * mn10200-dis.c: Finish writing disassembler.
2023 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2024 Fix mask for "jmp (an)".
2026 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2027 handle endianness issues for mn10300.
2029 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2031 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2033 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2034 instruction. Fix opcode field for "movb (imm24),dn".
2036 * mn10200-opc.c (mn10200_operands): Fix insertion position
2039 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2041 * mn10200-opc.c: Create mn10200 opcode table.
2042 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2043 but moving along nicely.
2045 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2047 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2049 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2051 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2052 specifiers for fmovem* instructions.
2054 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2056 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2058 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2060 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2063 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2065 * mn10300-opc.c: Add some comments explaining the various
2068 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2070 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2072 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2075 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2076 operand specifiers in fmovm* instructions.
2078 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2080 * ppc-opc.c (insert_li): Give an error if the offset has the two
2081 least significant bits set.
2083 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2085 * mips-dis.c (print_insn_mips16): Separate the instruction from
2086 the arguments with a tab, not a space.
2088 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2090 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2093 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2096 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2098 * configure: Rebuild with autoconf 2.12.
2100 Add support for mips16 (16 bit MIPS implementation):
2101 * mips16-opc.c: New file.
2102 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2103 (mips16_reg_names): New static array.
2104 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2105 after seeing a 16 bit symbol.
2106 (print_insn_little_mips): Likewise.
2107 (print_insn_mips16): New static function.
2108 (print_mips16_insn_arg): New static function.
2109 * mips-opc.c: Add jalx instruction.
2110 * Makefile.in (mips16-opc.o): New target.
2111 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2112 * configure: Rebuild.
2114 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2116 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2117 operand specifiers in *save, *restore and movem* instructions.
2119 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2122 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2123 register operands for immediate arithmetic, not, neg, negx, and
2124 set according to condition instructions.
2126 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2127 specifier of the effective-address operand in immediate forms of
2128 arithmetic instructions. The specifier for the immediate operand
2129 notes how and where the constant will be stored.
2131 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2133 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2136 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2139 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2141 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2143 * mn10300-dis.c (disassemble): Handle register lists.
2145 * mn10300-opc.c: Fix handling of register list operand for
2146 "call", "ret", and "rets" instructions.
2148 * mn10300-dis.c (disassemble): Print PC-relative and memory
2149 addresses symbolically if possible.
2150 * mn10300-opc.c: Distinguish between absolute memory addresses,
2151 pc-relative offsets & random immediates.
2153 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2155 (disassemble): Handle SPLIT and EXTENDED operands.
2157 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2159 * mn10300-dis.c: Rough cut at printing some operands.
2161 * mn10300-dis.c: Start working on disassembler support.
2162 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2164 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2166 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2168 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2170 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2172 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2174 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2175 register argument is calls and jmp instructions.
2177 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2179 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2180 getx operand. Fix opcode for mulqu imm,dn.
2182 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2184 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2185 in MN10300_OPERAND_SPLIT operands for how many bits
2186 appear in the basic insn word. Add IMM32_HIGH24,
2187 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2188 (mn10300_opcodes): Use new operands as needed.
2190 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2191 for bset, bclr, btst instructions.
2192 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2194 * mn10300-opc.c (mn10300_operands): Remove many redundant
2195 operands. Update opcode table as appropriate.
2196 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2197 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2199 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2201 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2202 operands (for indexed load/stores). Fix bitpos for DI
2203 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2204 few instructions that insert immediates/displacements in the
2205 middle of the instruction. Add IMM8E for 8 bit immediate in
2206 the extended part of an instruction.
2207 (mn10300_operands): Use new opcodes as appropriate.
2209 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2211 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2212 sequential so the assembler never parallelizes it with
2215 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2217 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2218 a data/address register that appears in register field 0
2219 and register field 1.
2220 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2222 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2224 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2225 standard disassembly.
2227 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2228 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2229 Recategorize PALcode instructions.
2231 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2233 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2235 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2237 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2238 there are no operand types.
2240 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2242 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2244 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2246 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2248 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2250 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2252 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2253 and sst.w instructions.
2255 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2258 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2260 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2263 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2265 * ppc-opc.c (PPCPWR2): Define.
2266 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2269 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2271 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2272 field for movhu instruction.
2274 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2275 cast value to "long" not "signed long" to keep hpux10
2278 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2280 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2283 * mn10300-opc.c (FMT*): Remove definitions.
2285 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2286 for shift-by-register opcodes.
2288 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2289 into [AD][MN][01] for encoding the position of the register
2292 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2294 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2295 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2297 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2299 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2300 Fix various typos. Add "PAREN" operand.
2301 (MEM, MEM2): Define.
2302 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2303 operands. Fix several typos.
2305 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2308 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2310 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2311 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2313 (mn10300_opcodes): Break opcode format out into its own field.
2314 Update many operand fields to deal with signed vs unsigned
2315 issues. Fix one or two typos in the "mov" instruction
2316 opcode, mask and/or operand fields.
2318 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2320 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2321 m68851 wasn't reset.
2323 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2325 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2326 all opcodes. Very rough cut at operands for all opcodes.
2328 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2331 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2333 * mn10200-opc.c, mn10300-opc.c: New files.
2334 * mn10200-dis.c, mn10300-dis.c: New files.
2335 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2336 * disassemble.c: Break mn10x00 support into 10200 and 10300
2338 * configure.in: Likewise.
2339 * configure: Rebuilt.
2341 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2343 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2345 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2347 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2349 * disassemble (ARCH_mn10x00): Define.
2350 (disassembler): Handle bfd_arch_mn10x00.
2351 * configure.in: Recognize bfd_mn10x00_arch.
2352 * configure: Rebuilt.
2354 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2356 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2357 accordingly. Don't declare functions using op_rtn.
2359 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2361 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2362 params to be more standard.
2363 * (disassemble): Print absolute addresses and symbolic names for
2364 branch and jump targets.
2365 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2367 * (v850_opcodes): Add breakpoint insn.
2369 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2371 * m68k-opc.c: Move the fmovemx data register cases before the
2372 other cases, so that they get recognized before the data register
2373 does gets treated as a degenerate register list.
2375 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2377 * mips-opc.c: Add a case for "div" and "divu" with two registers
2378 and a destination of $0.
2380 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2382 * mips-dis.c (print_insn_arg): Add prototype.
2383 (_print_insn_mips): Ditto.
2385 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2387 * mips-dis.c (print_insn_arg): Print condition code registers as
2390 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2392 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2394 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2396 * v850-dis.c (disassemble): Make static. Provide prototype.
2398 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2400 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2403 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2405 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2406 ']' characters into the output stream.
2407 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2408 Add "memop" field to all opcodes (for the disassembler).
2409 Reorder opcodes so that "nop" comes before "mov" and "jr"
2410 comes before "jarl".
2412 * v850-dis.c (print_insn_v850): Fix typo in last change.
2414 * v850-dis.c (print_insn_v850): Properly handle disassembling
2415 a two byte insn at the end of a memory region when the memory
2416 region's size is only two byte aligned.
2418 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2420 * v850-dis.c (v850_reg_names): Define.
2421 (v850_sreg_names, v850_cc_names): Likewise.
2422 (disassemble): Very rough cut at printing operands (unformatted).
2424 * v850-opc.c (BOP_MASK): Fix.
2425 (v850_opcodes): Fix mask for jarl and jr.
2427 * v850-dis.c: New file. Skeleton for disassembler support.
2428 * Makefile.in Remove v850 references, they're not needed here.
2429 * configure.in: Add v850-dis.o when building v850 toolchains.
2430 * configure: Rebuilt.
2431 * disassemble.c (disassembler): Call v850 disassembler.
2433 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2434 (insert_d8_6, extract_d8_6): New functions.
2435 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2436 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2438 (IF4A, IF4B): Use "D7" instead of "D7S".
2439 (IF4C, IF4D): Use "D8_7" instead of "D8".
2440 (IF4E, IF4F): New. Use "D8_6".
2441 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2442 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2444 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2445 (v850_operands): Change D16 to D16_15, use special insert/extract
2446 routines. New new D16 that uses the generic insert/extract code.
2447 (IF7A, IF7B): Use D16_15.
2448 (IF7C, IF7D): New. Use D16.
2449 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2451 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2452 message. Issue an error if the branch offset is odd.
2454 * v850-opc.c: Add notes about needing special insert/extract
2455 for all the load/store insns, except "ld.b" and "st.b".
2457 * v850-opc.c (insert_d22, extract_d22): New functions.
2458 (v850_operands): Use insert_d22 and extract_d22 for
2460 (insert_d9): Fix range check.
2462 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2464 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2465 and set bits field to D9 and D22 operands.
2467 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2469 * v850-opc.c (v850_operands): Define SR2 operand.
2470 (v850_opcodes): "ldsr" uses R1,SR2.
2472 * v850-opc.c (v850_opcodes): Fix opcode specs for
2473 sld.w, sst.b, sst.h, sst.w, and nop.
2475 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2477 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2478 end of the opcode table.
2480 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2482 * d10v-opc.c (pre_defined_registers): Added register pairs,
2483 "r0-r1", "r2-r3", etc.
2485 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2487 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2488 Create I16U for an unsigned 16bit mmediate operand.
2489 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2491 * v850-opc.c (v850_operands): Define EP operand.
2492 (IF4A, IF4B, IF4C, IF4D): Use EP.
2494 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2495 with immediate operand, "movhi". Tweak "ldsr".
2497 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2498 correct. Get sld.[bhw] and sst.[bhw] closer.
2500 * v850-opc.c (v850_operands): "not" is a two byte insn
2502 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2504 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2506 * v850-opc.c (two): Get order of words correct.
2508 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2510 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2511 register source and destination operands.
2512 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2514 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2515 same thinko in "trap" opcode.
2517 * v850-opc.c (v850_opcodes): Add initializer for size field
2520 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2521 Add D8 for 8-bit unsigned field in short load/store insns.
2522 (IF4A, IF4D): These both need two registers.
2523 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2524 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2525 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2526 for "ldsr" and "stsr".
2527 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2530 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2531 short store word (sst.w).
2533 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2535 * v850-opc.c (v850_operands): Added insert and extract fields,
2536 pointers to functions that handle unusual operand encodings.
2538 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2540 * v850-opc.c (v850_opcodes): Enable "trap".
2542 * v850-opc.c (v850_opcodes): Fix order of displacement
2543 and register for "set1", "clr1", "not1", and "tst1".
2545 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2547 * v850-opc.c (v850_operands): Add "B3" support.
2548 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2551 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2553 * v850-opc.c: Close unterminated comment.
2555 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2557 * v850-opc.c (v850_operands): Add flags field.
2558 (v850_opcodes): add move opcodes.
2560 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2562 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2563 * configure: (bfd_v850v_arch) Add new case.
2564 * configure.in: (bfd_v850_arch) Add new case.
2565 * v850-opc.c: New file.
2567 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2569 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2571 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2573 * d10v-opc.c: Add additional information to the opcode
2574 table to help determinine which instructions can be done
2577 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2579 * mpw-make.sed: Update editing of include pathnames to be
2582 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2584 * arm-opc.h: Added "bx" instruction definition.
2586 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2588 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2590 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2592 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2594 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2596 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2598 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2600 * makefile.vms: Update for alpha-opc changes.
2602 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2604 * i386-dis.c (print_insn_i386): Actually return the correct value.
2605 (ONE, OP_ONE): #ifdef out; not used.
2607 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2609 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2610 Changed subi operand type to treat 0 as 16.
2612 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2614 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2617 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2619 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2620 memory transfer instructions. Add new format string entries %h and %s.
2621 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2624 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2626 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2627 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2629 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2631 * alpha-dis.c (print_insn_alpha_osf): Remove.
2632 (print_insn_alpha_vms): Remove.
2633 (print_insn_alpha): Make globally visible. Chose the register
2634 names based on info->flavour.
2635 * disassemble.c: Always return print_insn_alpha for the alpha.
2637 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2639 * d10v-dis.c (dis_long): Handle unknown opcodes.
2641 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2643 * d10v-opc.c: Changes to support signed and unsigned numbers.
2644 All instructions with the same name that have long and short forms
2645 now end in ".l" or ".s". Divs added.
2646 * d10v-dis.c: Changes to support signed and unsigned numbers.
2648 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2650 * d10v-dis.c: Change all functions to use info->print_address_func.
2652 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2654 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2655 move ccr/sr insns more strict so that the disassembler only
2656 selects them when the addressing mode is data register.
2658 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2659 * d10v-opc.c (pre_defined_registers): Declare.
2660 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2661 to pick a better name for the registers.
2663 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2665 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2666 operands for fexpand and fpmerge. From Christian Kuehnke
2667 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2669 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2671 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2672 print routine. Take new regnames and cpumask arguments.
2673 Kill the environment variable nonsense.
2674 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2675 (print_insn_alpha_vms): New function. Do VMS style regnames.
2676 * disassemble.c (disassembler): Test bfd flavour to pick
2677 between OSF and VMS routines. Default to OSF.
2679 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2681 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2682 * configure: Rebuild.
2683 * Makefile.in (install): Use @INSTALL_SHLIB@.
2685 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2687 * configure: (bfd_d10v_arch) Add new case.
2688 * configure.in: (bfd_d10v_arch) Add new case.
2689 * d10v-dis.c: New file.
2690 * d10v-opc.c: New file.
2691 * disassemble.c (disassembler) Add entry for d10v.
2693 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2695 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2696 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2698 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2700 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2701 distinguish between variants of the instruction set.
2702 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2703 distinguish between variants of the instruction set.
2705 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2707 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2708 the 8086 instruction set.
2709 * i386-dis.c: General cleanups. Make most things static. Add
2710 prototypes. Get rid of static variables aflags and dflags. Pass
2711 them as args (to almost everything).
2713 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2715 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2717 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2719 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2720 if the next arg is marked with SRC_IN_DST. Gross.
2722 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2723 we're looking for and find EXR.
2725 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2726 if we're looking for KBIT and we don't find it.
2728 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2731 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2732 3bit immediate operands.
2734 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2736 * Released binutils 2.7.
2738 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2739 <kkaempf@progis.ac-net.de>.
2741 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2743 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2745 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2747 * sparc-dis.c (print_insn_sparclite): New routine to print
2748 sparclite instructions.
2750 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2752 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2754 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2756 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2757 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2758 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2760 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2762 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2763 Use autoconf-set values.
2764 (docdir, oldincludedir): Removed.
2765 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2767 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2769 * alpha-opc.c: New file.
2770 * alpha-opc.h: Remove.
2771 * alpha-dis.c: Complete rewrite to use new opcode table.
2772 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2773 * configure: Rebuild with autoconf 2.10.
2774 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2775 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2777 (alpha-opc.o): New target.
2779 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2781 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2782 Set imm_added_to_rs1 even if the source and destination register
2785 * sparc-opc.c: Add some two operand forms of the wr instruction.
2787 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2789 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2792 * disassemble.c (disassembler): Handle H8/S.
2793 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2795 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2797 * sparc-opc.c: Add beq/teq as aliases for be/te.
2799 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2800 <sergei@msil.sps.mot.com>.
2802 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2804 * makefile.vms: New file.
2806 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2808 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2810 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2813 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2815 * i386-dis.c (OP_OFF): Call append_prefix.
2817 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2819 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2820 unsigned long to silence a warning from the Solaris PowerPC
2823 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2825 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2827 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2829 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2831 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2832 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2833 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2834 cpush, cpusha, cpull sparclet insns.
2836 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2838 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2840 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2842 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2843 Set F_FLOAT on other floating point instructions.
2845 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2847 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2849 (powerpc_opcodes): Add 860/821 specific SPRs.
2851 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2853 * configure.in: Permit --enable-shared to specify a list of
2854 directories. Set and substitute BFD_PICLIST.
2855 * configure: Rebuild.
2856 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2857 uses. Set to @BFD_PICLIST@.
2859 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2861 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2862 not "abs", which may be needed for the absolute in something
2863 like btst #0,@10:8. Print L_3 immediates separately from other
2864 immediates. Change ABSMOV reference to ABS8MEM.
2866 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2868 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2869 (current_arch_mask): New static global.
2870 (compute_arch_mask): New static function.
2871 (print_insn_sparc): Delete sparc_v9_p. New static local
2872 current_mach. Resort opcode table if current_mach changes.
2873 Generalize "insn not supported" test.
2874 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2875 Delete test for v9/!v9.
2876 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2878 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2879 (brfcx): Renamed to FBRX.
2880 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2881 coprocessor mnemonics are not supported on the sparclet).
2882 (condf): Renamed to CONDF.
2883 (SLCBCC2): Delete F_ALIAS flag.
2885 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2887 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2888 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2890 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2892 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2893 that the shared library version number is set correctly.
2895 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2897 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2898 Miles Bader <miles@gnu.ai.mit.edu>.
2899 * configure: Rebuild.
2901 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2903 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2906 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2908 * configure: Rebuild with autoconf 2.8.
2910 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2912 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2913 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2915 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2917 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2918 since they appear as targets in Makefile.in.
2919 * configure: Rebuild.
2921 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2923 * mpw-make.sed: Edit out shared library support bits.
2925 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2927 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2928 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2929 (sparc_opcodes): Add sparclet insns.
2930 (sparclet_cpreg_table): New static local.
2931 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2932 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2934 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2936 * i386-dis.c (index16): New static variable.
2937 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2939 (OP_indirE): Return result of OP_E.
2940 (OP_E): Check for 16 bit addressing mode, and disassemble
2941 correctly. Optimised 32 bit case a little. Don't print
2942 "(base,index,scale)" when sib specifies only an offset.
2944 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2946 * configure.in: Set and substitute SHLIB_DEP.
2947 * configure: Rebuild.
2948 * Makefile.in (SHLIB_DEP): New variable.
2949 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2950 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2951 COMMON_SHLIB, add them to piclist with appropriate modifications.
2952 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2953 here: just use piclist.
2955 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2957 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2958 (print_insn_sparc): Rewrite v9/not-v9 tests.
2959 (compare_opcodes): Likewise.
2960 * sparc-opc.c (MASK_<ARCH>): Define.
2961 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2962 (sparclet,v6notv9): Define.
2963 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2964 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2966 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2968 * configure.in: Call AC_PROG_CC before configure.host.
2969 * configure: Rebuild.
2971 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2973 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2975 * i386-dis.c (onebyte_has_modrm): New static array.
2976 (twobyte_has_modrm): New static array.
2977 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2979 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2981 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2984 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2986 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2989 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2991 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2992 m68010up, not just m68020up | cpu32.
2994 * Makefile.in (SONAME): New variable.
2995 ($(SHLINK)): Make a link to the transformed name, as well.
2996 (stamp-tshlink): New target.
2997 (install): Skip stamp-tshlink during install.
2999 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3001 * configure.in: Call AC_ARG_PROGRAM.
3002 * configure: Rebuild.
3003 * Makefile.in (program_transform_name): New variable.
3004 (install): Transform library name before installing it.
3006 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3008 * i960-dis.c (mem): Add HX dcinva instruction.
3010 Support for building as a shared library, based on patches from
3011 Alan Modra <alan@spri.levels.unisa.edu.au>:
3012 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3013 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3014 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3015 * configure: Rebuild.
3016 * Makefile.in (ALLLIBS): New variable.
3017 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3018 (COMMON_SHLIB, SHLINK): New variables.
3019 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3020 (STAGESTUFF): Remove variable.
3021 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3022 (stamp-piclist, piclist): New targets.
3023 ($(SHLIB), $(SHLINK)): New targets.
3024 ($(OFILES)): Depend upon stamp-picdir.
3025 (disassemble.o): Build twice if PICFLAG is set.
3026 (MOSTLYCLEAN): Add pic/*.o.
3027 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3028 (distclean): Remove pic and stamp-picdir.
3029 (install): Install shared libraries.
3030 (stamp-picdir): New target.
3032 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3034 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3035 Print unknown instruction as "unknown", rather than in hex.
3037 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3039 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3041 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3043 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3045 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3047 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3048 when necessary. From Ulrich Drepper
3049 <drepper@myware.rz.uni-karlsruhe.de>.
3051 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3053 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3054 sparc_num_opcodes. Update architecture enum values.
3055 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3056 (sparc_opcode_lookup_arch): New function.
3057 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3058 (sparc_opcodes): Add v9a shutdown insn.
3060 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3062 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3063 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3065 (print_insn_sparc64): Deleted.
3066 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3069 * sparc-opc.c (architecture_pname): Add v9a.
3071 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3073 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3074 incorrectly defined as 0x16 when it should be 0x15.
3075 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3076 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3077 excb (exception barrier) which is defined in the Alpha
3078 Architecture Handbook version 2.
3079 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3080 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3081 disassembled as or, for example.
3083 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3085 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3086 (_print_insn_mips): Change i from int to unsigned int.
3088 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3090 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3091 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3093 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3095 * i386-dis.c: Added Pentium Pro instructions.
3097 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3099 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3102 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3104 * sh-opc.h (sh_nibble_type): Added REG_B.
3105 (sh_arg_type): Added A_REG_B.
3106 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3108 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3110 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3112 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3114 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3116 * Makefile.in (distclean): Remove stamp-h. From Ronald
3117 F. Guilmette <rfg@monkeys.com>.
3119 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3121 From David Mosberger-Tang <davidm@azstarnet.com>:
3122 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3125 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3127 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3128 (sh_table): Added many SH3 opcodes.
3129 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3131 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3133 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3134 (subco,subco.): Mark this PPC, not PPCCOM.
3136 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3138 * configure: Rebuild with autoconf 2.7.
3140 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3142 * configure: Rebuild with autoconf 2.6.
3144 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3146 * configure.in: Sort list of architectures. Accept but do nothing
3147 for alliant, convex, pyramid, romp, and tahoe.
3149 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3151 * a29k-dis.c (print_special): Change num to unsigned int.
3153 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3155 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3158 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3160 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3161 * configure: Rebuilt.
3163 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3165 * configure.in: Add case for bfd_i860_arch.
3166 * configure: Rebuild.
3168 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3170 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3171 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3172 (NEXTDOUBLE): Likewise.
3173 (print_insn_m68k): Don't match fmoveml if there is more than one
3174 register in the list.
3175 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3177 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3179 * m68k-opc.c: Use #W rather than #w.
3180 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3182 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3184 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3185 and likewise for all the dbxx opcodes.
3187 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3189 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3191 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3193 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3194 the VR4100 specific instructions to the mips_opcodes structure.
3196 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3198 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3199 ugly Metrowerks bug in CW6, is fixed in CW7.
3201 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3203 * ppc-opc.c (whole file): Add flags for common/any support.
3205 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3207 * Makefile.in (BISON): Remove macro.
3208 (FLAGS_TO_PASS): Remove BISON.
3210 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3212 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3214 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3215 instructions that take no args by looking at the match mask.
3216 (print_insn_arg): Always print "%" before register names.
3217 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3218 [case '_']: Don't print "@#" before address.
3219 [case 'J']: Use "%s" as format string, not register name.
3220 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3222 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3224 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3227 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3229 From David Mosberger-Tang <davidm@azstarnet.com>
3231 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3232 (alpha_insn_set): added definitions for VAX floating point
3233 instructions (Unix compilers don't generate these, but handcoded
3234 assembly might still use them).
3236 * alpha-dis.c (print_insn_alpha): added support for disassembling
3237 the miscellaneous instructions in the Alpha instruction set.
3239 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3241 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3242 no longer create sysdep.h, sed ppc-opc.c to work around a
3243 serious Metrowerks C bug.
3244 * mpw-make.in: Remove.
3245 * mpw-make.sed: New file, used by mpw-configure to edit
3246 Makefile.in into an MPW makefile.
3248 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3250 * Makefile.in (maintainer-clean): New synonym for realclean.
3252 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3254 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3255 which use '0', '1', and '2' instead. Specify the proper size for
3256 a pmove immediate operand. Correct the pmovefd patterns to be
3257 moves to a register, not from a register.
3258 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3260 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3262 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3263 %psr, %wim, %tbr as F_NOTV9.
3265 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3267 * Makefile.in (Makefile): Just rebuild Makefile when running
3269 (config.h, stamp-h): New targets.
3270 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3271 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3272 rebuilding config.h.
3273 * configure: Rebuild.
3275 * mips-opc.c: Change unaligned loads and stores with "t,A"
3276 operands to use "t,A(b)".
3278 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3280 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3282 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3284 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3285 until 3 instead of until 2.
3287 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3289 * Makefile.in (ALL_CFLAGS): Define.
3290 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3291 (MOSTLYCLEAN): Add config.log.
3292 (distclean): Don't remove config.log.
3293 * configure.in: Substitute HDEFINES.
3294 * configure: Rebuild.
3296 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3298 * sh-opc.h (sh_arg_type): Add F_FR0.
3299 (sh_table, case fmac): Add F_FR0 as first argument.
3301 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3303 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3305 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3307 * sparc-dis.c: Remove all references to NO_V9.
3309 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3311 * aclocal.m4: Just include ../bfd/aclocal.m4.
3312 * configure: Rebuild.
3314 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3316 * sparc-dis.c (X_DISP19): Define.
3317 (print_insn, case 'G'): Use it.
3318 (print_insn, case 'L'): Sign extend displacement.
3320 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3322 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3323 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3324 host_makefile_frag or frags.
3325 * aclocal.m4: New file.
3326 * configure: Rebuild.
3327 * Makefile.in (INSTALL): Set to @INSTALL@.
3328 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3329 (INSTALL_DATA): Set to @INSTALL_DATA@.
3331 (AR_FLAGS): Set to rc rather than qc.
3332 (CC): Define as @CC@.
3333 (CFLAGS): Set to @CFLAGS@.
3334 (@host_makefile_frag@): Remove.
3335 (config.status): Remove dependency upon @frags@.
3337 * configure.in: ../bfd/config.bfd now just sets shell variables.
3338 Use them rather than looking through target Makefile fragments.
3339 * configure: Rebuild.
3341 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3343 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3345 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3347 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3348 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3351 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3352 (lookup_{name,value}): New functions.
3353 (prefetch_table): New static local.
3354 (sparc_{encode,decode}_prefetch): New functions.
3355 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3357 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3359 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3362 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3364 * sh-dis.c: Correct comment on first line of file.
3366 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3368 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3370 * sparc-opc.c (asi, membar): New static locals.
3371 (sparc_{encode,decode}_{asi,membar}): New functions.
3372 (sparc_opcodes, membar insn): Fix.
3373 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3374 Support decoding of membar masks.
3377 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3379 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3381 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3383 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3384 and likewise for the other branches. Add bhs as an alias for bcc,
3385 and likewise for the size variants. Add dbhs as an alias for
3388 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3390 * sh-opc.h (FP sts instructions): Update to match reality.
3392 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3394 * m68k-dis.c: (fpcr_names): Add % before all register names.
3395 (reg_names): Likewise.
3396 (print_insn_arg): Don't explicitly print % before register names.
3397 Add % before register names in static array names. In case 'r',
3398 print data registers as `@(Dn)', not `Dn@'. When printing a
3399 memory address, don't print @# before it.
3400 (print_indexed): Change base_disp and outer_disp from int to
3401 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3402 syntax. Sign extend 8 byte displacement correctly.
3403 (print_base): Print using MIT syntax. Print zpc when appropriate.
3404 Change parameter disp from int to bfd_vma.
3406 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3409 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3411 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3412 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3413 * sh-opc.h (sh_arg_type): Add new operand types.
3414 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3416 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3418 * Makefile.in (distclean): Remove generated file config.h.
3420 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3422 * Makefile.in (distclean): Remove generated file config.h.
3424 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3426 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3428 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3430 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3431 rather than numopcodes. Use m68k_opcodes rather than removed
3432 opcode function. Don't check F_ALIAS.
3433 (print_insn_arg): Change first parameter to be const char *.
3434 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3435 (m68k-opc.o): New target.
3436 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3437 * configure: Rebuild.
3439 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3441 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3442 (opcode_bits, opcode_hash_table): New variables.
3443 (opcodes_initialized): Renamed from opcodes_sorted.
3444 (build_hash_table): New function.
3445 (is_delayed_branch): Use hash table.
3446 (print_insn): Renamed from print_insn_sparc, made static.
3447 Build and use hash table. If !sparc64, ignore sparc64 insns,
3448 and vice-versa if sparc64.
3449 (print_insn_sparc, print_insn_sparc64): New functions.
3450 (compare_opcodes): Move sparc64 opcodes to end.
3451 Print commutative insns with constant second.
3452 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3454 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3456 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3457 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3458 avoids printing a delay slot in a delay slot.
3459 * sh-opc.h (sh_table): Fully bracket last entry.
3461 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3463 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3465 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3467 * configure.in: Get host_makefile_frag from ${srcdir}.
3469 * configure.in: Autoconfiscated. Check for string[s].h. Create
3470 config.h from config.in. Don't set up sysdep.h link.
3471 * sysdep.h: New file.
3472 * configure, config.in: New files, generated from configure.in.
3473 * Makefile.in: Updated to be processed autoconf-style.
3474 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3475 (Makefile): Depend on config.status.
3476 (config.status): New rule.
3477 * configure.bat: Update Makefile substitutions.
3479 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3481 * mips-opc.c (L1): Define.
3482 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3483 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3486 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3488 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3489 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3490 have multiple add units but only a single logical unit.
3492 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3493 shifted by 18, without any insertion or extraction function.
3494 (insert_cr, extract_cr): Remove.
3496 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3498 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3501 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3503 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3504 * sh-opc.h: Add copyright.
3506 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3508 * Makefile.in (crunch-m68k): Delete extra target accidentally
3509 checked in a while ago.
3511 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3513 * sh-opc.h (sh_table): Add SH3 support.
3515 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3517 * sh-opc.h: Added bsrf and braf.
3519 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3521 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3522 bogus [ls]fm{ea,fd} patterns.
3524 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3525 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3526 initialize it from memory. Make function static.
3527 (print_insn_{big,little}_arm): New functions.
3528 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3529 the correct endianness.
3531 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3533 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3536 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3538 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3539 17th, so that it builds again using GCC as the compiler.
3541 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3543 * mips-dis.c (print_insn_little_mips): Cast return value from
3544 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3545 expects an unsigned long, and that might be fewer words of
3546 argument storage (e.g., if bfd_vma is long long on a 32-bit
3548 (print_insn_big_mips): Likewise with bfd_getb32 value.
3549 (_print_insn_mips): Now static.
3551 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3553 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3554 gcc memory hog problem with initializer is fixed.
3556 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3558 Merge in support for Mac MPW as a host.
3559 (Old change descriptions retained for informational value.)
3561 * mpw-config.in (archname): Compute from the config.
3562 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3564 * mpw-config.in (target_arch): Compute from canonical target.
3565 (m68k, mips, powerpc, sparc): Add architectures.
3566 * mpw-make.in (disassemble.c.o): Add.
3567 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3569 * mpw-config.in (BFD_MACHINES): Set to a default value.
3570 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3572 * mpw-make.in (CSEARCH): Add extra-include to search path.
3574 * mpw-config.in (varargs.h): Don't create.
3575 (sysdep.h): Create using forward-include.
3576 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3578 * mpw-config.in: New file, MPW version of configure.in.
3579 * mpw-make.in: New file, MPW version of Makefile.in.
3581 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3583 * alpha-dis.c (print_insn_alpha): Put empty statement after
3586 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3588 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3589 (low_sign_extend): Likewise.
3590 (get_field): Delete unused function.
3591 (set_field, deposit_14, deposit_21): Likewise.
3593 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3595 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3598 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3600 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3602 * alpha-opc.h (OSF_ASMCODE): define
3603 print pal-code names as defined in App C of the
3604 Alpha Architecture Reference Manual
3606 * alpha-dis.c: cleaned up output
3607 print stylized code forms as defined in App A.4.3 of the
3608 Alpha Architecture Reference Manual
3610 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3612 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3614 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3617 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3619 * m68k-dis.c (opcode): New function. Returns address of opcode
3620 table entry given index, even if the opcode table was split to
3621 work around gcc bugs.
3622 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3624 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3625 (reg_names): Now const.
3626 (print_insn_arg): Arrays cacheFieldName and names now const.
3627 (print_indexed): Array scales now const.
3629 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3631 * ppc-opc.c: Sort recently added instructions by minor opcode
3632 number within major opcode number.
3634 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3636 * hppa-dis.c: Include libhppa.h.
3638 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3640 * mips-opc.c: Change dli to use M_DLI, and add dla.
3642 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3644 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3646 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3648 * mips-opc.c: Add r4650 mul instruction.
3650 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3652 * mips-opc.c: Add uld and usd macros for unaligned double load and
3655 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3657 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3658 mfdcr, mtdcr, icbt, iccci.
3660 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3662 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3663 signed char fields to shorts, more portable.
3665 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3667 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3668 char fields as signed chars, since they may have negative values.
3670 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3672 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3673 (mycroft@netbsd.org).
3675 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3677 From "Logg, Ed" <elogg@ea.com>:
3678 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3679 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3682 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3684 * ppc-opc.c: Changes based on patch from David Edelsohn
3685 <edelsohn@mhpcc.edu>.
3686 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3689 (insert_tbr): New static function.
3690 (extract_tbr): New static function.
3691 (XFXFXM_MASK, XFXM): Define.
3692 (XSPRBAT_MASK, XSPRG_MASK): Define.
3693 (powerpc_opcodes): Add instructions to access special registers by
3694 name. Add mtcr and mftbu.
3696 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3698 * mips-opc.c (P3): Define.
3699 (mips_opcodes): Add mad and madu.
3701 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3703 * configure.in: Add W65 support.
3704 * disassemble.c: Likewise.
3705 * w65-opc.h, w65-dis.c: New files.
3707 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3709 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3712 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3714 * mips-opc.c: Add dli as a synonym for li.
3716 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3718 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3719 print something for reserved opcode values, even if it won't
3722 * mips-dis.c (_print_insn_mips): When initializing, shift right
3723 and mask, to avoid sign extension problems on the Alpha.
3725 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3728 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3730 * sh-opc.h (mov.l gbr): Get direction right.
3731 * sh-dis.c (print_insn_shx): New function.
3732 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3733 print opcodes with right byte order.
3735 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3737 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3738 to avoid conflicts with getopt.
3740 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3742 * hppa-dis.c (print_insn_hppa): Read the instruction using
3743 bfd_getb32, so that it works on a little endian or 64 bit host.
3744 Remove unused local variable op.
3746 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3748 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3749 addu does not work correctly if -mips3.
3751 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3753 * a29k-dis.c (print_special): Add special register names defined
3754 on 29030, 29040 and 29050.
3755 (print_insn): Handle new operand type 'I'.
3757 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3759 * Makefile.in (INSTALL): Use top level install.sh script.
3761 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3763 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3764 that it works on a little endian host.
3766 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3768 * configure.in: Use ${config_shell} when running config.bfd.
3770 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3772 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3774 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3776 * a29k-dis.c (print_insn): Print the opcode.
3778 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3780 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3782 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3784 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3786 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3788 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3789 which store a value into memory.
3791 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3793 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3794 * arm-dis.c, arm-opc.h: New files.
3796 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3798 * Makefile.in (ns32k-dis.o): Add dependency.
3799 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3800 string, not as array of chars.
3802 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3804 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3806 * sparc-opc.c: Added sparclite extended FP operations, and
3807 versions of v9 impdep* instructions permitting specification of
3810 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3812 * i960-dis.c (reg_names): Now const.
3813 (struct sparse_tabent): New type, copied from array type in mem
3815 (ctrl): Local static array ctrl_tab now const.
3816 (cobr): Local static array cobr_tab now const.
3817 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3818 static variable mem_tab no longer explicitly initialized. Changed
3819 mem_init to const array of struct sparse_tabent.
3820 (reg): Local static variable reg_tab no longer explicitly
3821 initialized. Changed reg_init to const array of struct
3823 (ea): Local static array scale_tab now const.
3825 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3828 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3830 * configure.bat: the disassember needs to be enabled for
3831 "objdump -d" to work in djgpp.
3833 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3835 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3836 (invalid_float): Enabled general version, doesn't require running
3837 on ns32k host. Changed to take char* argument, and test for
3838 explicitly specified sizes, instead of using sizeof() on host CPU
3840 (INVALID_FLOAT): Cast first argument.
3841 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3842 list_P032, list_M032): Now const.
3843 (optlist, list_search): Made appropriate arguments now point to
3845 (print_insn_arg): Changed static array of one-character-string
3846 pointers into a static const array of characters; fixed sprintf
3847 statement accordingly.
3849 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3851 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3852 from distribution. A ns32k-dis.c from a previous distribution has
3853 been brought up to date and supports the new interface.
3855 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3857 * configure.in: add bfd_ns32k_arch target support.
3859 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3860 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3862 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3864 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3867 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3869 * h8300-dis.c, mips-dis.c: Don't use true and false.
3871 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3873 * configure.in: Change --with-targets to --enable-targets.
3875 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3877 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3878 opcodes to the first instruction with that opcode, to speed
3879 disassembly of large files. From ralphc@pyramid.com (Ralph
3882 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3884 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3886 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3888 * configure.bat: update to latest makefile.in
3890 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3892 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3893 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3894 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3895 slot insn is in a delay slot.
3896 * z8k-opc.h: (resflg): Fix patterns.
3897 * h8500-opc.h Fix CR insn patterns.
3899 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3901 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3902 "cmpl" before POWER versions, so that gas -many uses them.
3904 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3906 * disassemble.c: New file.
3907 * Makefile.in (OFILES): Add disassemble.o.
3908 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3909 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3910 binutils/configure.in.
3912 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3913 opcode being examined.
3915 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3917 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3918 (insert_ral, insert_ram, insert_ras): New functions.
3919 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3920 RAS for store with update.
3922 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3924 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3925 (edelsohn@npac.syr.edu).
3927 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3929 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3932 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3934 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3936 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3938 * ppc-opc.c (powerpc_operands): The signedp field has been
3939 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3940 instead. Add new operand SISIGNOPT.
3941 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3942 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3943 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3946 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3948 * i386-dis.c (struct private): Renamed to dis_private. `private'
3949 is a reserved word for dynix cc.
3951 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3953 * configure.in: Change error message to refer to bfd/config.bfd
3954 rather than bfd/configure.in.
3956 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3958 * ppc-opc.c: Define POWER2 as short alias flag.
3959 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3962 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3964 * i960-dis.c (print_insn_i960): Don't read a second word for
3965 opcodes 0, 1, 2 and 3.
3967 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3969 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3971 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3973 * m68881-ext.c: Removed; no longer used.
3974 * Makefile.in: Changed accordingly.
3976 * m68k-dis.c (ext_format_68881): Don't declare.
3977 (print_insn_m68k): If an instruction uses place 'i', it uses at
3978 least four fixed bytes.
3979 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3980 extended float, convert to double using floatformat_to_double, not
3981 ieee_extended_to_double, and fetch the data before converting it.
3983 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3985 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3986 davidj@ICSI.Berkeley.EDU (David Johnson).
3988 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3990 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3991 PowerPC uses bdnz[l][a].
3993 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3995 * dis-buf.c, i386-dis.c: Include sysdep.h.
3997 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3999 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4001 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4002 by Motorola PowerPC 601 with PPC_OPCODE_601.
4003 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4004 Disassemble Motorola PowerPC 601 instructions as well as normal
4005 PowerPC instructions.
4007 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4009 * i960-dis.c (reg, mem): Just use a static array instead of
4012 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4014 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4015 condition name index if this is for a negated condition.
4017 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4018 Floating point format for 'H' operand is backwards from normal
4019 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4020 operands (fmpyadd and fmpysub), handle bizarre register
4021 translation correctly for single precision format.
4023 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4024 or 'I' operands if the next format specifier is 'M' (fcmp
4025 condition completer).
4027 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4029 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4030 single number giving a bitmask for the MB and ME fields of an M
4031 form instruction. Change NB to accept 32, and turn it into 0;
4032 also turn 0 into 32 when disassembling. Seperated SH from NB.
4033 (insert_mbe, extract_mbe): New functions.
4034 (insert_nb, extract_nb): New functions.
4035 (SC_MASK): Mask out SA and LK bits.
4036 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4037 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4038 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4039 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4040 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4041 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4042 (powerpc_macros): Define table of macro definitions.
4043 (powerpc_num_macros): Define.
4045 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4046 if PPC_OPERAND_NEXT is set.
4048 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4050 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4051 char. Retrieve contents using bfd_getl32 instead of shifting.
4053 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4055 * ppc-opc.c: New file. Opcode table for PowerPC, including
4056 opcodes for POWER (RS/6000).
4057 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4058 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4059 (CFILES): Add ppc-dis.c.
4060 (ppc-dis.o, ppc-opc.o): New targets.
4061 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4063 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4065 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4066 No space before 'u', 'f', or 'N'.
4068 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4070 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4071 farther than we should.
4073 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4075 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4077 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4079 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4081 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4082 needs it, to prevent reading past the end of a section.
4084 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4086 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4087 Removed t,A case for la; always use t,A(b) case.
4089 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4091 From Ted Lemen <mellon@pepper.ncd.com>
4092 * mips-dis.c (print_insn_arg): Handle 'k'.
4093 * mips-opc.c: Make cache use k, not t.
4095 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4097 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4098 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4099 FLOAT_FORMAT_CODE to put out floating point register names.
4101 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4103 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4105 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4107 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4109 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4111 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4112 larger than 32. Moved dsxx32 variants first for disassembler.
4114 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4116 * z8kgen.c, z8k-opc.h: Add full lda information.
4118 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4120 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4121 movb instructions. Any necessary space will be emitted by
4122 the code to handle nullification completers.
4124 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4126 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4128 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4130 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4131 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4133 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4135 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4137 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4139 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4140 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4142 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4144 * m88k-dis.c (m88kdis): comment change. Remove space after
4146 (printop): handle new arg types DEC and XREG for m88110.
4148 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4150 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4151 type for absolute branch addresses. Delete special
4152 "ble" and "be" code in 'W' operand code.
4154 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4156 * mips-opc.c: Set hazard information correctly for branch
4157 likely instructions.
4159 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4161 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4162 info->fprintf_func for printing and info->print_address_func for
4165 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4167 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4169 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4171 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4172 Corrected second case of "b" for disassembler.
4174 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4176 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4177 to BFD swapping routines to correspond to BFD name changes.
4179 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4181 * mips-opc.c: Change div machine instruction to be z,s,t rather
4182 than s,t. Change div macro to be d,v,t rather than d,s,t.
4183 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4184 rem and remu which generates only the corresponding div
4185 instruction. This is for compatibility with the MIPS assembler,
4186 which only generates the simple machine instruction when an
4187 explicit destination of $0 is used.
4188 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4190 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4192 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4193 WR_31 hazard for bal, bgezal, bltzal.
4195 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4197 * hppa-dis.c (print_insn_hppa): Use print function
4198 from within the disassemble_info, not fprintf_filtered.
4200 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4202 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4203 Law, law@cs.utah.edu.)
4205 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4207 * mips-opc.c ("absu"): Removed.
4210 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4212 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4213 Changed hazard information to distinguish between memory load
4214 delays and coprocessor load delays.
4216 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4218 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4220 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4222 * configure.in: Don't pass cpu to config.bfd.
4224 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4226 * m88k-dis.c (m88kdis): Make class unsigned.
4228 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4230 * alpha-dis.c (print_insn_alpha): One branch format case was
4231 missing the instruction name.
4233 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4235 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4236 Add the arch-specific auxiliary files.
4237 (OFILES): Remove the arch-specific auxiliary files
4238 and use BFD_MACHINES instead of DIS_LIBS.
4239 * configure.in: Set BFD_MACHINES based on --with-targets option.
4241 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4243 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4246 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4248 * sparc-opc.c: Change CONST to const to deal with gcc
4249 -Dconst=__const -traditional.
4251 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4253 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4254 coprocessor instructions out of #if 0, and made them use new
4257 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4259 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4261 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4263 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4264 instruction, for use by the disassembler.
4266 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4267 hand-coded sign extensions that depended on 32-bit host ints.
4268 FIXME, we still depend on big-endian host bitfield ordering.
4269 (sparc_print_insn): Set the insn_info_valid field, and the
4270 other fields that describe the instruction being printed.
4272 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4274 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4275 `jmp' instead of just one of them.
4277 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4279 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4280 (fput_fp_reg_r): Renamed from fput_reg_r.
4281 (fput_fp_reg): New function.
4282 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4284 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4286 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4288 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4290 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4292 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4293 don't output a space.
4295 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4297 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4299 * mips-opc.c: New file, containing opcode table from
4300 ../include/opcode/mips.h.
4301 * Makefile.in: Add it.
4303 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4305 * m88k-dis.c: New file, moved in from gdb and changed to use the
4306 new dis-asm.h disassembler interface.
4307 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4308 (m88k-dis.o): New target.
4310 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4312 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4313 argument string const char * to correspond to opcode/mips.h.
4315 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4317 * mips-dis.c: Updated to account for name changes in new version
4319 * Makefile.in: Added header file dependencies.
4321 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4323 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4325 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4327 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4328 extend, rather than shifts.
4330 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4332 * Makefile.in: Undo 15 June change.
4334 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4336 * m68k-dis.c (print_insn_arg): Change return value to byte count
4338 * m68k-dis.c: Re-write to detect invalid operands before
4339 printing anything, so we can handle this the same way we
4340 handle invalid opcodes.
4342 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4344 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4346 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4348 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4351 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4353 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4355 * configure.in: Do make sysdep.h link.
4356 * Makefile.in: Search ../include. Don't search ../bfd.
4358 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4360 Changes from Jeff Law, law@cs.utah.edu:
4361 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4362 Do not print a space before the completers specified by
4365 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4367 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4368 defined, since gdb has been fixed.
4370 Changes from Jeff Law, law@cs.utah.edu:
4371 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4372 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4373 be a *disassemble_info, not a *FILE.
4374 * hppa-dis.c: Support 'd', '!', and 'a'.
4375 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4376 * hppa-dis.c: Delete cases which are no longer needed.
4378 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4380 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4382 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4384 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4387 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4389 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4390 * configure.in: No longer need to configure to get sysdep.h.
4392 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4394 * Patches from Jeffrey Law <law@cs.utah.edu>.
4395 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4396 templates for 1.1 FP computational instructions.
4398 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4400 * h8500-dis.c (print_insn_h8500): Address argument is type
4402 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4405 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4406 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4408 * sparc-dis.c (compare_opcodes): Move static declaration to
4411 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4413 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4414 instruction, remove unimp hack from 'l' argument.
4416 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4418 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4421 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4423 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4424 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4427 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4429 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4430 arrays of string pointers to 2-d arrays of chars, to save
4433 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4435 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4436 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4438 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4440 * hppa-dis.c: New file from Utah, adapted to new disassembler
4442 * Makefile.in: Include it.
4444 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4446 * sh-dis.c, sh-opc.h: New files.
4448 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4450 * alpha-dis.c, alpha-opc.h: New files.
4452 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4454 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4457 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4459 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4461 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4463 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4466 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4468 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4469 and double percent signs a few places.
4471 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4473 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4474 Use info->print_address_func not print_address.
4476 * dis-buf.c (generic_print_address): New function.
4478 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4480 * Makefile.in: Add sparc-dis.c.
4481 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4483 Add `add' instruction to the set that get checked
4484 for a preceding `sethi' in order to print an absolute address.
4485 * (print_insn): Disassembly prefers real instructions.
4486 (is_delayed_branch): Speed up.
4487 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4488 Still missing some float ops, and needs testing.
4489 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4490 F_ALIAS. Use printf, not fprintf, when not passing a file
4492 (compare_opcodes): Check that identical instructions have
4493 identical opcodes, complain otherwise.
4496 * Include reg_names.
4498 Use dis-asm.h/read_memory_func interface.
4500 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4502 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4503 deliberately return non-zero to setjmp from longjmp. Otherwise
4504 this code fails to compile.
4506 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4508 * m68k-dis.c: Fix prototype for fetch_arg().
4510 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4512 * dis-buf.c: New file, for new read_memory_func interface.
4513 Makefile.in (OFILES): Include it.
4514 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4515 Use new read_memory_func interface.
4517 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4519 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4520 * h8500-opc.h: Fix couple of opcodes.
4522 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4524 * Makefile.in: add dvi & installcheck targets
4526 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4528 * Makefile.in: Update for h8500-dis.c.
4530 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4532 * h8500-dis.c, h8500-opc.h: New files
4534 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4536 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4537 ../include/dis-asm.h.
4538 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4539 and ../gdb/m68k-pinsn.c).
4540 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4541 and ../gdb/i386-pinsn.c).
4542 * m68881-ext.c: New file. Moved definition of
4543 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4544 * Makefile.in: Adjust for new files.
4545 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4546 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4547 can be dis-assembled.
4549 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4551 * mips-dis.c (print_insn_arg): Now returns void.
4553 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4555 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4556 files that use the macros.
4558 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4560 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4561 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4562 (CFILES): Added mips-dis.c.
4564 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4566 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4567 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4569 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4571 * Makefile.in: Improve *clean rules.
4572 * configure.in: Allow a default host.
4574 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4576 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4577 files include other sysdep files
4579 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4581 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4583 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4585 * configure.in: For host support, use ../bfd/configure.host
4586 so it stays in sync with the ../bfd/hosts database.
4588 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4590 * configure.in: use cpu-vendor-os triple instead of nested cases
4592 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4594 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4595 *always* the wrong one.
4597 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4599 * z8kgen.c: added copyright info
4601 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4603 * z8k-dis.c (unparse_instr): prettier tabs
4604 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4606 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4608 * configure.in: Add ncr* configuration.
4609 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4610 picayune ANSI compilers happy.
4612 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4614 * configure.in (i386): Make i386 and i486 synonymous for now.
4615 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4617 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4619 * Makefile.in (install): Fix typo.
4621 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4623 * Makefile.in (make): Remove obsolete crud.
4624 (sparc-opc.o): Avoid Sun Make VPATH bug.
4626 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4628 * Makefile.in: since there are no SUBDIRS, remove rule and
4629 references of subdir_do.
4631 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4633 * Makefile.in (install): Get the library name right here too.
4634 Don't install bfd.h, since it's unrelated to this library. No
4635 subdirs to recurse into, either.
4636 (CFILES): The source file has a .c suffix, not .o.
4638 * sparc-opc.c: New file, moved from BFD.
4639 * Makefile.in (OFILES): Build it.
4641 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4643 * z8k-dis.c: fixed forward refferences of some declarations.
4645 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4647 * Makefile.in: get the name of the library right
4649 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4651 * z8k-dis.c: knows how to disassemble z8k stuff
4652 * z8k-opc.h: new file full of z8000 opcodes
4656 version-control: never