2 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
4 * mn10300-opc.c (IMM32_HIGH8_MEM): New operand type.
5 (mn10300_opcodes): Reorder so as to try and select opcodes from
6 the core chip when multiple alternatives exist. Change several
7 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
8 "macbu" instructions. Fix typos in a couple DSP instructions too.
11 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
13 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
14 related to sign extension and the size of ints.
16 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
18 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
19 instructions. Support (sp) addressing mode by expanding it into
23 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
25 * m10300-opc.c: Support 4 byte DSP instructions.
28 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
30 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
33 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
35 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
38 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
40 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
43 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
45 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
49 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
51 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
54 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
56 * mips-dis.c (print_insn_little_mips): Previously, instruction
57 printing references the symbol table to determine whether the
58 instruction resides in a block regular instructions or mips16
59 instructions. However, when the disassembler gets used in other
60 environments where the symbol table is not present, we no longer
61 rely in the symbol table, rather, use the low bit of the
62 instructions address to guess. There should be no change for usage
63 of the disassembler in host based programse, gdb ,objdump.
64 (print_insn_big_mips): ditto.
65 (print_insn_mips): ditto
67 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
69 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
71 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
74 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
75 operands for the am33.
76 (mn10300_opcodes): Add new instructions from the am33.
78 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
80 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
82 * i386-dis.c (index16): Add '%' to register names. Use ','
85 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
87 * i386-dis.c: Don't print opcode suffix when we can figure out the
88 size (and gas can!) by register operands, or from the default
90 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
92 (dis386, dis386_twobyte, grps): Use new suffix macros.
93 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
94 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
95 order of cmps operands to agree with Intel docs. Correct operand
96 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
97 agree with Intel docs.
98 (print_insn_x86): Print orphan fwait before other prefixes.
99 Return correct byte count for orphan fwait with prefixes. Don't
100 print `bound' operands in reverse order.
101 (ckprefix): Stop accumulating prefixes if we get fwait.
102 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
104 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
106 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
107 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
109 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
111 Fix problems when bfd_vma is wider than long.
112 * i386-dis.c: Make op_address and start_pc unsigned.
113 (set_op): Make parameter unsigned.
114 (print_insn_x86): Cast to bfd_vma when passing a value to
116 * ns32k-dis.c (CORE_ADDR): Don't define.
117 (print_insn_ns32k): Change type of addr to bfd_vma. Use
118 bfd_scan_vma to read back address.
119 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
121 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
122 (NEXTULONG): New definition.
123 (print_insn_m68k): Avoid overflow when computing third argument of
125 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
126 Use disp instead of val to store offset values.
127 (print_indexed): Use base_disp instead of word to store base
128 displacement, to avoid overflow.
129 * m10300-dis.c (disassemble): Cast value to long when computing
130 pc-relative address, to get correct sign extension.
132 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
134 * m32r-opc.c: Regenerate.
136 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
138 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
139 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
141 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
143 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
145 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
147 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
149 (OP_DSreg): Rename from OP_DSSI.
150 (OP_ESreg): Rename from OP_ESDI.
151 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
153 (append_seg): Rename from append_prefix.
154 (ptr_reg): New function.
155 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
157 (PREFIX_ADDR): Rename from PREFIX_ADR.
158 (float_reg): Add non-broken opcodes for people who don't want
161 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
163 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
166 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
168 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
170 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
172 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
173 0; produce error message for shifts of size 32 (or 64 for 64-bit
174 shifts), because the hardware doesn't support them.
177 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
179 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
182 * vu0.h (sqc2): Fix opcode.
184 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
188 start-sanitize-vr5400
189 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
191 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
192 Change pinfo to use WR_HILO.
196 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
198 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
199 LONG_2, LONG_2b formats to use this new operand.
202 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
204 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
206 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
208 * sparc-dis.c (print_insn_sparc): big endian instruction / little
212 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
214 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
215 and SHORT_B3b formats to use Rb instead of Ra.
217 Add FLAG_MUL16 to MUL2XH opcode.
219 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
220 to existing 1.1.1 parallelisation prohibition procedure.
223 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
225 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
226 * cgen-dis.in (extract_normal): Likewise.
227 * m32r-asm.c,m32r-dis.c: Regenerate.
230 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
232 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
236 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
238 * mips-opc.c (multu1): Add two operand variant for the r5900.
241 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
243 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
244 with a shift count of 0.
247 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
249 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
251 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
253 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
254 (_print_insn_mips): Likewise.
255 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
259 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
261 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
262 (cgen_hw_lookup_by_num): New function.
265 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
268 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
270 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
272 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
274 * sparc-dis.c (print_insn_sparc): Always fetch instructions
275 as big-endian on SPARClite.
278 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
280 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
282 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
287 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
289 * d30v-opc.c (pre_defined_register): Remove alias for r0.
293 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
295 * mips-opc.c (break): Added 20-bit single-operand break
296 instruction for R5900 only.
299 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
301 * po/Make-in (install-info): New target.
303 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
305 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
306 * configure: Rebuild.
308 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
310 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
311 variety of ISA2 instructions to set bottom ten bits of trap code.
313 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
315 * Makefile.am (config.status): Add explicit target so that
316 config.status depends upon bfd/configure.in.
317 * Makefile.in: Rebuild.
319 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
321 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
322 instructions to set bottom ten bits of break code.
323 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
324 for above optional argument.
326 start-sanitize-cygnus
327 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
329 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
330 * m32r-opc.h: Regenerate.
333 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
335 * makefile.vms: Run dec c with /nodebug.
337 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
339 * Makefile.in: Rebuilt.
340 * Makefile.am: Regenerated dependencies with mkdep.
342 * opintl.h (_): Define as dgettext.
344 start-sanitize-cygnus
345 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
347 * configure.in: Add support for --enable-cgen-maint.
348 * Makefile.am (M32R_DEPS): New variable.
349 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
350 * aclocal.m4: Regenerate.
351 * Makefile.in: Regenerate.
352 * configure: Regenerate.
354 * Makefile.am (CGENFILES): Add minsn.scm.
357 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
359 * cgen-asm.c: Internationalised.
360 start-sanitize-cygnus
361 * cgen-asm.in: Internationalised.
362 * cgen-opc.in: Internationalised.
364 * m32r-asm.c: Internationalised.
365 * m32r-dis.c: Internationalised.
366 * m32r-opc.c: Internationalised.
368 * aclocal.m4: Regenerated.
369 * configure: Regenerated.
370 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
371 * Makefile.in: Rebuild.
372 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
373 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
375 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
377 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
379 * aclocal.m4, configure: Rebuild with current tools.
381 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
383 * opintl.h: New file - contains internationalisation macros used
384 by source files in this directory.
385 * po/: New subdirectory - contains internationalisation files.
386 * po/Make-in: New file - Makefile constructor.
387 * po/POTFILES.in: New file - list of files in opcodes directory
388 that should be scan for internationalisation macros.
389 * po/opcodes.pot: New file - list of internationisation strings
390 found in files mentioned in po/POTFILES.in.
391 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
392 entry. Add intl directory to include paths.
393 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
394 HAVE_STRCPY, HAVE_LC_MESSAGES
395 * configure.in: Add rule to build Makefile in po subdirectory.
396 * Makefile.in: Rebuilt.
397 * aclocal.m4: Rebuilt.
398 * config.in: Rebuilt.
399 * configure: Rebuilt.
400 * alpha-opc.c: Internationalised.
401 * arc-dis.c: Internationalised.
402 * arc-opc.c: Internationalised.
403 * arm-dis.c: Internationalised.
404 * cgen-asm.c: Internationalised.
406 * d30v-dis.c: Internationalised.
408 * dis-buf.c: Internationalised.
410 * dvp-dis.c: Internationalised.
411 * dvp-opc.c: Internationalised.
413 * h8300-dis.c: Internationalised.
414 * h8500-dis.c: Internationalised.
415 * i386-dis.c: Internationalised.
416 * m10200-dis.c: Internationalised.
417 * m10300-dis.c: Internationalised.
418 * m68k-dis.c: Internationalised.
419 * m88k-dis.c: Internationalised.
420 * mips-dis.c: Internationalised.
421 * ns32k-dis.c: Internationalised.
422 * opintl.h: Internationalised.
423 * ppc-opc.c: Internationalised.
424 * sparc-dis.c: Internationalised.
425 * v850-dis.c: Internationalised.
426 * v850-opc.c: Internationalised.
428 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
430 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
431 (asm_hash_table_entries): New variable.
432 (cgen_asm_init): Free asm_hash_table_entries.
433 (hash_insn_array,hash_insn_list): New functions.
434 (build_asm_hash_table): Use them. Hash macro insns as well.
435 (cgen_asm_lookup_insn): Update.
436 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
437 (dis_hash_table_entries): New variable.
438 (cgen_dis_init): Free dis_hash_table_entries.
439 (hash_insn_array,hash_insn_list): New functions.
440 (build_dis_hash_table): Use them. Hash macro insns as well.
441 (cgen_dis_lookup_insn): Update.
442 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
443 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
444 (cgen_macro_insn_count): New function.
445 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
446 All callers updated. Sanity check result of extract fn.
447 (@arch@_cgen_get_insn_operands): Change result type to void.
448 Delete args insn_value, length. New arg fields. All callers updated.
449 (@arch@_cgen_lookup_get_insn_operands): New function.
450 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
452 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
454 * i386-dis.c (OP_DSSI): Print segment override.
457 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
459 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
463 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
465 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
469 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
471 * vu0.h (vlqd, vlqi): Update per revised specs.
475 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
477 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
478 (vif_operands): Update.
479 (vif_get_unpackloc): Delete.
480 (state_vif_unpackloc{,_star_p}): Delete.
481 (dvp_opcode_init_parse): Update.
482 (vif_unpack_len_value): Avoid divide by zero.
486 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
488 * vu0.h: Specs changed for VCALLMSR bit pattern.
489 * mips-dis.c: (print_insn_arg) Matching change.
492 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
494 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
497 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
499 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
500 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
501 * configure.in: Define and substitute WIN32LDFLAGS and
503 * aclocal.m4: Rebuild with new libtool.
504 * configure, Makefile.in: Rebuild.
507 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
509 * vu0.h: Corrected bit pattern for VMAXI opcode.
512 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
514 * m32r-opc.c: Regenerate.
517 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
519 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
520 (dvp_expand_macro): Implement.
521 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
522 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
525 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
527 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
528 before trying to copy it.
529 * Makefile.in: Rebuild.
531 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
533 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
536 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
538 * m32r-opc.c: Fix bit patterns for SAT and SATB.
541 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
543 * ns32k-dis.c (bit_extract_simple): New function to extract bits
544 from an arbitrary valid buffer instead of fetching them on demand
546 (invalid_float): use bit_extract_simple() instead of bit_extract().
549 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
551 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
552 * m32r-opc.h: Add extra control registers.
555 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
557 From H.J. Lu <hjl@gnu.org>:
558 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
561 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
563 * Branched binutils 2.9.
566 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
568 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
569 disassembling last 4 bytes of a section.
572 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
574 Fix some gcc -Wall warnings:
575 * arc-dis.c (print_insn): Add casts to avoid warnings.
576 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
577 * d10v-dis.c (dis_long, dis_2_short): Likewise.
579 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
580 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
581 (parse_bc, parse_vfreg, parse_accdest): Likewise.
582 (parse_ffstreg, parse_vif_mode): Likewise.
584 * m10200-dis.c (disassemble): Likewise.
585 * m10300-dis.c (disassemble): Likewise.
586 * ns32k-dis.c (print_insn_ns32k): Likewise.
587 * ppc-opc.c (insert_ral, insert_ram): Likewise.
588 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
589 * cgen-opc.c (cgen_keyword_search_next): Likewise.
590 * d10v-dis.c (dis_long, dis_2_short): Likewise.
592 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
595 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
596 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
597 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
599 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
601 * tic80-dis.c (print_one_instruction): Likewise.
603 * w65-dis.c (print_operand): Likewise.
604 * z8k-dis.c (fetch_data): Likewise.
605 * a29k-dis.c: Add return type for find_byte_func_type.
606 * arc-opc.c: Include <stdio.h>. Remove declarations of
607 insert_multshift and extract_multshift.
609 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
611 (extract_value): Fully parenthesize expression.
614 * dvp-opc.c: Include <ctype.h>.
615 (print_sdest): Add default case to switch.
617 * h8500-dis.c (print_insn_h8500): Initialize local variables.
618 * h8500-opc.h (h8500_table): Fully bracket initializer.
619 * w65-opc.h (optable): Likewise.
620 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
621 * i386-dis.c (OP_E): Initialize local variables.
622 * m10200-dis.c (print_insn_mn10200): Likewise.
623 * mips-dis.c (print_insn_mips16): Likewise.
624 * sh-dis.c (print_insn_shx): Likewise.
625 * v850-dis.c (print_insn_v850): Likewise.
626 * ns32k-dis.c (print_insn_arg): Declare.
627 (get_displacement, invalid_float): Declare.
628 (list_search, sign_extend, flip_bytes): Declare return type.
629 (get_displacement): Likewise.
630 (print_insn_arg): Likewise. Make d int. Fix sprintf format
632 (print_insn_ns32k): Make i unsigned.
633 (invalid_float): Make static. Declare type of val.
634 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
635 on each for iteration.
636 * tic30-dis.c (get_indirect_operand): Likewise.
637 * z8k-dis.c (print_insn_z8001): Declare return type.
638 (print_insn_z8002): Likewise.
639 (unparse_instr): Fix sprintf format strings.
641 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
643 * mips-opc.c: Add "sync.l" and "sync.p".
646 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
648 * dvp-opc.c (extract_vif_datalen): Rewrite.
649 (vif_insn_len): Perform 0->max+1 conversion for direct length.
651 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
653 * dvp-dis.c (print_insn): Print unpack address in hex.
654 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
655 Don't skip over '*', just record it.
656 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
657 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
658 Don't skip over '*', just record it.
659 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
660 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
661 (vif_opcodes): Likewise.
662 (state_vif_{mpg,unpack}loc_star_p): New static locals.
663 (vif_macros,vif_macro_count): New globals.
664 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
665 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
666 (vif_get_wl_cl): New function.
667 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
670 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
672 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
673 default m68k variant to recognize.
675 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
676 (ctrl, cobr, mem, ea): Likewise.
677 (print_addr): Likewise. Remove cast.
678 (ea): Cast argument of print_addr to bfd_vma.
680 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
682 (cgen_parse_unsigned_integer): Likewise.
683 (cgen_parse_address): Likewise.
685 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
687 * i960-dis.c (ctrl): Add full braces to structure initialization.
688 (cobr, mem, reg): Likewise.
689 (ea): Correct parenthesization in expression.
691 * cgen-asm.c: Include <ctype.h>.
692 (build_asm_hash_table): Remove unused local variable i.
693 (cgen_parse_keyword): Add casts to avoid warnings.
695 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
696 symbol. Fix indentation.
697 (print_insn_little_arm): Likewise.
700 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
702 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
707 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
709 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
714 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
716 * dvp-opc.c (vif_operand_datalen_special): New global.
720 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
722 * vu0.h (vcallms): Use 'O' for call target operand.
723 * mips-dis.c (print_insn_arg): Handle 'O'.
726 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
728 * configure.in: Use AM_DISABLE_SHARED.
729 * aclocal.m4, configure: Rebuild with libtool 1.2.
732 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
734 * mips-dis.c: Change '%' to '#' in r5900 support.
738 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
740 These patches are courtesy of Jonathan Walton and Tony Thompson
741 (athompso@cambridge.arm.com).
743 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
746 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
747 both the offset and the label closest to the destination.
750 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
752 * vu0.h: New file with cop2/vu0 instructions.
753 * mips-opc.c: Include vu0.h.
754 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
756 (print_insn_mips): Do not emit a tab after an instruction if the
757 first arg is an instruction completer (&). If the next arg is an
758 escape character (%), then print the next arg verbatim.
759 * Makefile.am (mips-opc.lo): Depend on vu0.h
763 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
765 * dvp-opc.c (vif_opcodes): Add stcycl.
767 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
769 * dvp-dis.c (print_dma): Change length from 16 to 8.
772 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
774 * m32r-opc.h: Regenerate.
777 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
779 * dvp-opc.c (print_dest1): Print dest spec again.
780 (print_vfreg,print_accdest): Likewise.
781 (vif_unpack_len): Round result up to word boundary.
784 start-sanitize-vr4320
785 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
787 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
789 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
791 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
796 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
798 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
799 (print_insn): Do mask comparison on proper opcode word.
800 Print unsigned values in hex.
801 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
802 (parse_bc): Catch missing dest.
803 (parse_vfreg): Replace atoi call with strtol.
804 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
805 (parse_bcftreg,parse_ffstreg): Handle missing dest.
806 (extract_gif_eop): New function.
807 (gif_operands): Update eop entry.
808 (VGIFOP,VGIFNREGS): Fix calcs.
809 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
810 (gif_regs): Add entry for unused 11 case.
811 (print_gif_regs): Print empty list instead of nothing.
812 (extract_gif_nloop): Fix value calc.
813 (print_gif_nloop): Always print value, even if 0.
814 (insert_vif_wlcl,extract_vif_wlcl): New functions.
815 (vif_operands): Use them for wl,cl fields.
816 (state_vif_wl,state_vif_cl): New static locals.
817 (parse_vif_mode): Handle numeric args.
818 (vif_unpack_len_value,vif_unpack_len): New functions.
819 (vif_insn_len): Call vif_unpack_len.
822 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
824 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
826 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
828 * cgen-asm.in: Move insertion of generated routines to top of file.
829 (insert_normal): Add prototype. Delete `shift' arg.
830 * cgen-dis.in: Move insertion of generated routines to top of file.
831 (extract_normal): Add prototype. Delete `shift' arg.
832 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
833 (print_keyword): Add prototype. Fix type of `attrs' arg.
835 start-sanitize-vr4320
836 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
838 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
839 * mips-opc.c ("mac","dmac") : Added 4320 insns.
842 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
844 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
845 assume that info->symbols is non-empty.
847 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
849 * alpha-opc.c (cvtqs) There is no such thing.
850 (cvttq): Missing most of the /*d variants.
853 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
855 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
857 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
858 (r5900/msub.s): Takes three operands, not four. Fix opcode.
862 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
864 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
865 delayed branches or jumps.
869 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
871 * dvp-opc.c (vif_operands): Add unpack[u] support.
872 (vif_opcodes): Ditto.
873 (*_vif_imrubits): Renamed from *_vif_imrbits.
875 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
877 * dvp-dis.c (print_insn): Handle word number.
878 Handle mips address vs vu address.
879 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
880 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
881 ({insert,extract}_dma_addr): Fix word ofset.
882 ({insert,print}_gif_regs): Fix encode/decode.
885 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
887 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
889 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
890 * tic30-dis.c (print_branch): Likewise.
892 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
893 * dvp-dis.c (dvp_info_mach_type): New function.
894 (print_insn_dvp): Call it.
895 (print_vif): Return length of 4 if mpg or direct insn so following
896 insns get properly disabled.
897 (print_gif): Fix word order.
898 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
899 (gif_operands): Fix word order.
900 (gif_opcodes): Likewise.
901 ({insert,extract,print}_gif_regs): Likewise.
902 (gif_regs): Add new register number/name changes.
903 (dma_opcodes): Add dmarefe insn.
906 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
908 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
909 saved_symbol code as it is no longer needed.
911 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
913 * cgen-asm.c: Include symcat.h.
914 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
916 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
919 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
921 * dvp-opc.c (extra_dma_flags): Fix typos.
922 (dma_operands): Fix word numbers.
923 (dma_opcodes): Likewise.
924 ({insert,extract}_dma_flags): Likewise.
927 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
929 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
932 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
934 * dvp-dis.c (print_gif): Complete.
935 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
936 (state_gif_{nregs,regs,nloop}): New static locals.
938 (dvp_opcode_init_{parse,print}): Init gif state locals.
939 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
940 (vif_insn_len): Handle `unpack'.
941 ({insert,extract}_dma_flags): Complete.
945 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
947 * mips-opc.c (mula.s): Renamed from multa.s.
950 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
952 * m32r-opc.[ch]: Regenerate.
955 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
957 * dvp-opc.c (dma_operands): Rewrite.
958 (dma_operand_{count,addr}): New globals.
959 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
960 (insert_dma_addr): Insert value into insn.
961 (extract_dma_addr): Extract value from insn.
963 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
965 * dvp-dis.c (print_vu): Handle loi insns.
966 (print_insn): Likewise.
967 * dvp-opc.c (vu_lower_opcodes): Add "loi".
968 (vu_operands): Make LDEST1 a FAKE operand.
969 (parse_dest1): Allow elided argument.
970 (print_dest1): Don't print the argument.
972 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
974 * dvp-opc.c (parse_vfreg): Dest spec is optional.
975 (print_vfreg): Don't print dest spec.
976 (parse_accdest): Dest spec is optional.
977 (print_accdest): Don't print dest spec.
980 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
982 * Makefile.am (CGENFILES): Update.
983 * Makefile.in: Regenerate.
984 * cgen-asm.in (insert_normal): Result is error message now.
985 Validate value to be inserted.
986 (insert_insn_normal): Result is error message now.
987 (@arch@_cgen_assemble_insn): Update.
988 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
989 arguments. Don't perform validation here.
990 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
992 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
994 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
995 operand instance list.
996 * m32r-opc.c: Regenerate.
998 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1000 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1001 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1003 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1005 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1007 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1009 * configure.in: Get the version number from BFD.
1010 * configure: Rebuild.
1012 From H.J. Lu <hjl@gnu.org>:
1013 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1014 * Makefile.in: Rebuild.
1016 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1018 * m32r-opc.c: Regenerate.
1019 * m32r-opc.h: Regenerate.
1021 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1023 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1024 Ignore ALIAS insns if asked to.
1025 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1026 * m32r-opc.c: Regenerate.
1029 * dvp.opc.c: Nicely format opcode tables.
1030 (vu_operands): New element UFLAGS.
1031 (parse_uflags,print_uflags): New functions.
1032 (vu_upper_opcodes): Add UFLAGS to all insns.
1035 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1037 Fix rac to accept only a0:
1038 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1039 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1040 Introduce OPERAND_GPR.
1041 * d10v-dis.c (print_operand): Likewise.
1043 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1045 * cgen-opc.in: New file.
1046 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1047 * Makefile.am (CGENFILES): Add cgen-opc.in.
1048 * Makefile.in: Regenerate.
1050 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1051 (cgen_hw_lookup): Make result const.
1053 * cgen-dis.in (*): Use PTR instead of void *.
1054 (print_insn): Delete unused vars `i', `syntax'.
1056 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1059 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1061 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1062 (vif_opcodes): Update renamed insns.
1063 * dvp-dis.c (*): Likewise.
1066 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1068 * configure, aclocal.m4: Rebuild with new libtool.
1071 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1073 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1074 instructions use a PC relative branch, not absolute.
1077 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1079 * configure.in: Set libtool_enable_shared rather than
1080 libtool_shared. Remove diversion hack.
1081 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1083 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1085 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1086 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1088 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1090 * tic30-dis.c: New file.
1091 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1092 * configure.in: Handle bfd_tic30_arch.
1093 * Makefile.am: Rebuild dependencies.
1094 (CFILES): Add tic30-dis.c
1095 (ALL_MACHINES): Add tic30-dis.lo.
1096 * configure, Makefile.in: Rebuild.
1098 start-sanitize-m32rx
1099 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1101 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1102 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1103 macwhi-a and macwlo-a instructions.
1107 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1109 * dvp-opc.c, fixed encoding of a bunch of instructions to
1110 be consistent with the asmvu assembler (and inconsistent
1111 with the specification).
1113 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1115 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1116 in the opcode table. The pkemscalf instruction must come first.
1118 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1120 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1123 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1125 * m32r-opc.h (HAVE_CPU_M32R): Define.
1128 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1130 * dvp-dis.c, dvp-opc.c: New files.
1131 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1132 * configure: Regenerate.
1133 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1134 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1135 (mips-dis.lo): Compile with @archdefs@.
1136 * Makefile.in: Regenerate.
1137 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1138 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1141 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1143 * v850-opc.c (insertion routines): If both alignment and size is
1144 wrong then report this.
1146 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1148 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1149 Only recognize instructions for the current target_processor.
1151 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1153 * d10v-dis.c (PC_MASK): Correct value.
1154 (print_operand): If there's a reloc, don't calculate the
1155 address because they could be in different sections.
1157 start-sanitize-cygnus
1158 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1160 * cgen.sh: Rewrite to be like simulator's version.
1161 * Makefile.am (cgen): Update call to cgen.sh.
1162 * Makefile.in: Regenerate
1165 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1167 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1168 instruction after the 4650's "mul" instruction; nobody's using the
1169 4010 these days. If object files someday indicate which processor
1170 variant they're intended for, we can do a better job at this.
1172 start-sanitize-r5900
1173 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1175 * mips-opc.c (c.lt.s): Add r5900 variant.
1179 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1181 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1182 table provided entry size. Use CGEN_INSN_MNEMONIC.
1183 (cgen_parse_keyword): Rewrite.
1184 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1185 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1186 * cgen-opc.c: Clean up pass over `struct foo' usage.
1187 (cgen_keyword_lookup_value): Handle "" entry.
1188 (cgen_keyword_add): Likewise.
1189 start-sanitize-cygnus
1190 * Makefile.am: Add cgen support.
1191 * Makefile.in: Regenerate.
1192 * configure.in: Add cgen support.
1193 * configure: Regenerate.
1194 * aclocal.m4: Regenerate.
1195 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1198 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1200 * mips-opc.c: Add FP_D to s.d instruction flags.
1202 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1204 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1206 start-sanitize-tic80
1207 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1209 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1210 PC relative offset forms before the 15 bit forms. An assembler command
1211 line option now chooses the default.
1214 start-sanitize-r5900
1215 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1217 * mips-opc.c: Add many missing r5900 instructions.
1221 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1223 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1224 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1227 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1229 * configure: Only build libopcodes shared if --enable-shared's value
1230 was `yes', or was set to `*opcodes*'.
1231 * aclocal.m4: Likewise.
1232 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1233 original source of this bit of code. It's not clear what the best fix
1236 start-sanitize-r5900
1237 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1239 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1241 start-sanitize-tic80
1242 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1244 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1245 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1246 offset forms before the 15 bit forms, to default to the long forms.
1249 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1251 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1253 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1255 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1256 symbol if none is present.
1257 (print_insn_big_arm): Prevent examination of stored symbol if
1260 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1262 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1264 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1266 * disassemble.c: Remove disasm_symaddr() function.
1268 * arm-dis.c: Use info->symbol instead of info->flags to determine
1269 if disassmbly should be in Thumb or Arm mode.
1271 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1273 * arm-dis.c: Add support for disassembling Thumb opcodes.
1274 (print_insn_thumb): New function.
1276 * disassemble.c (disasm_symaddr): New function.
1278 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1279 (thumb_opcodes): Table of Thumb opcodes.
1281 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1283 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1285 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1286 and 'v' as operand types.
1288 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1290 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1291 <olivier.carmona@di.epfl.ch>.
1292 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1293 which has a two word opcode with a one word argument.
1296 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1298 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1299 unsigned, not signed.
1300 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1303 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1305 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1306 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1307 (ftrv): Slay the cut-and-paste monster.
1309 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1311 * d10v-dis.c (print_operand):
1312 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1314 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1316 * d10v-opc.c (OPERAND_FLAG): Split into:
1317 (OPERAND_FFLAG, OPERAND_CFLAG) .
1321 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1323 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1324 field for all INSN_MACRO's.
1325 * mips16-opc.c: same
1327 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1329 * mips-opc.c (sync,cache): These are 3900 insns.
1331 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1333 sh-opc.h (sh_table): Remove ftst/nan.
1335 start-sanitize-vr5400
1336 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1338 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1339 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1341 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1345 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1347 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1348 Add tx49 insns and configury.
1351 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1353 * mips-opc.c (ffc, ffs): Fix mask.
1356 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1358 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1362 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1364 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1365 start-sanitize-vr5400
1366 Added VR5400 instructions.
1367 (N5): New cpu-id macro.
1369 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1371 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1373 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1374 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1376 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1378 * v850-dis.c (disassemble): Replace // with /* ... */
1380 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1382 * sparc-opc.c: Add wr & rd for v9a asr's.
1383 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1384 (v9a_asr_reg_names): New variable.
1385 Patch from David Miller <davem@vger.rutgers.edu>.
1387 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1389 * sparc-opc.c (v9notv9a): New insn type.
1390 (IMPDEP): Move to the end to not conflict with edge8 et al.
1391 Patch from David Miller <davem@vger.rutgers.edu>.
1393 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1395 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1397 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1399 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1401 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1403 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1404 of disassemble_info structure to determine if an overlay address
1405 has a matching symbol in low memory.
1407 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1408 new symbol_at_address_func field in disassemble_info structure.
1410 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1412 * v850-opc.c (extract_d22): Use signed arithmatic.
1414 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1416 * mips-opc.c: Three op mult is not an ISA insn.
1418 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1420 * mips-opc.c: Fix formatting.
1422 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1424 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1425 than assuming that char is signed. Explicitly sign extend 16 bit
1426 values, rather than assuming that short is 16 bits.
1427 (OP_sI, OP_J, OP_DIR): Likewise.
1429 start-sanitize-v850e
1430 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1432 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1436 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1438 * v850-opc.c: Fix typo in comment.
1440 * v850-dis.c (disassemble): Add test of processor type when
1441 determining opcodes.
1443 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1445 * configure.in: Use a diversion to set enable_shared before the
1446 arguments are parsed.
1447 * configure: Rebuild.
1449 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1451 * m68k-opc.c (TBL1): Use ! rather than `.
1452 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1454 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1456 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1458 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1460 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1463 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1464 * aclocal.m4: Rebuild with new libtool.
1465 * configure: Rebuild.
1467 start-sanitize-v850e
1468 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1470 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1473 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1475 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1477 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1479 * v850-opc.c (v850_opcodes): Further rearrangements.
1482 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1484 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1487 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1489 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1492 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1494 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1496 * mips16-opc.c: Added mips16 sdbbp.
1499 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1501 * v850-opc.c: Initialise processors field of v850_opcode structure.
1504 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1506 Merge changes from Martin Hunt:
1508 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1510 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1511 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1512 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1514 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1516 * d30v-dis.c (print_insn): First operand of d*i (delayed
1517 branch) instructions is relative.
1519 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1520 (d30v_operand_table): Add IMM6S3 type.
1521 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1523 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1524 and cmp instructions.
1526 * d30v-opc.c: Correct entries for repeat*, and sat*.
1527 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1528 types. Correct several formats.
1530 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1532 * d30v-opc.c (pre_defined_registers): Change control registers.
1534 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1535 SHORT_C2. Manual was incorrect.
1537 * d30v-dis.c (lookup_opcode): Return value now indicates
1538 if an opcode has a short and a long form. Used for deciding
1539 to append a ".s" or ".l".
1540 (print_insn): Append a ".s" to an instruction if it is
1541 the short form and ".l" if it is a long form. Do not append
1542 anything if the instruction has only one possible size.
1544 * d30v-opc.c: Change mulx2h to require an even register.
1545 New form: SHORT_A2; a SHORT_A form that needs an even
1546 register as the first operand.
1548 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1549 instruction was not being disassembled if there were an odd
1550 number of instructions.
1552 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1555 start-sanitize-v850e
1556 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1558 * v850-dis.c (disassemble): Improved display of register lists.
1561 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1563 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1564 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1565 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1566 fandnot1s, fandnot2s.
1568 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1570 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1572 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1574 * cgen-asm.c (cgen_parse_address): New argument resultp.
1575 All callers updated.
1576 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1578 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1580 * mn10200-dis.c (disassemble): PC relative instructions are
1581 relative to the next instruction, not the current instruction.
1583 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1585 * v850-dis.c (disassemble): Only signed extend values that are not
1586 returned by extract functions.
1587 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1589 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1591 * v850-opc.c: Update comments. Remove use of
1592 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1594 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1596 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1598 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1600 * configure: Rebuilt with latest devo autoconf for NT support.
1602 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1604 * v850-dis.c (disassemble): Use curly brace syntax for register
1607 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1608 where r0 is being used as a destination register.
1610 start-sanitize-v850e
1611 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1613 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1616 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1618 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1619 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1620 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1621 Add insns to access SGR and DBR.
1622 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1624 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1626 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1628 start-sanitize-v850e
1629 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1631 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1632 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1635 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1637 * configure (cgen_files): Add support for v850e target.
1638 * configure.in (cgen_files): Add support for v850e target.
1640 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1642 * configure (cgen_files): Add support for v850ea target.
1643 * configure.in (cgen_files): Add support for v850ea target.
1646 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1648 * configure.in (bfd_arc_arch): Add.
1649 * configure: Rebuild.
1650 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1651 * Makefile.in: Rebuild.
1652 * arc-dis.c, arc-opc.c: New files.
1653 * disassemble.c (ARCH_all): Define ARCH_arc.
1654 (disassembler): Add ARC support.
1656 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1658 start-sanitize-v850e
1659 * v850-dis.c (disassemble): Add support for v850EA instructions.
1661 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1662 (v850_opcodes): Add v850EA instructions.
1664 * v850-dis.c (disassemble): Add support for v850E instructions.
1666 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1667 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1668 insert_spe, extract_spe): New Functions.
1669 (v850_opcodes): Add v850E instructions.
1672 * v850-opc.c: Reorganised and re-layed out to improve readability
1675 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1677 * configure: Rebuild with autoconf 2.12.1.
1679 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1681 * aclocal.m4, configure: Rebuild with new automake patches.
1683 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1685 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1686 * acinclude.m4: Just include acinclude.m4 from BFD.
1687 * aclocal.m4, configure: Rebuild.
1689 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1691 * Makefile.am: New file, based on old Makefile.in.
1692 * acconfig.h: New file.
1693 * acinclude.m4: New file.
1694 * stamp-h.in: New file.
1695 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1696 Removed shared library handling; now handled by libtool. Replace
1697 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1698 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1699 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1700 handling in AC_OUTPUT.
1701 * dep-in.sed: Change .o to .lo.
1702 * Makefile.in: Now built with automake.
1703 * aclocal.m4: Now built with aclocal.
1704 * config.in, configure: Rebuild.
1706 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1708 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1710 start-sanitize-r5900
1711 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1713 * mips-opc.c: Fix coding of mtsa.
1716 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1718 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1720 * sparc-dis.c (sorted_opcodes): New static local.
1721 (struct opcode_hash): `opcode' is pointer to const element.
1722 (build_hash): First arg is now table of sorted pointers.
1723 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1724 (compare_opcodes): Update.
1726 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1728 * cgen-opc.c: #include <ctype.h>.
1729 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1730 Handle case insensitive hashing.
1731 (hash_keyword_value): Change type of `value' to unsigned int.
1733 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1735 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1736 precision FP, mark it as such. Likewise for double precision
1737 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1739 start-sanitize-r5900
1740 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1743 start-sanitize-r5900
1744 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1746 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1747 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1750 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1752 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1754 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1755 nesting depth when all the macros are expanded.
1757 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1759 * sparc-opc.c: The fcmp v9a instructions take an integer register
1760 as a destination, not a floating point register. From Christian
1761 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1763 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1765 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1766 syntax. From Roman Hodek
1767 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1769 * i386-dis.c (twobyte_has_modrm): Fix pand.
1771 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1773 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1775 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1777 * arm-dis.c: Add prototypes for arm_decode_shift and
1780 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1782 * mips-opc.c: Add r3900 insns.
1784 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1786 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1787 print delay slot instructions on the same line. When using a PC
1788 relative load, add a comment with the value being loaded if it can
1791 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1793 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1794 to pushS/popS for segment regs and byte constant so that
1795 pushw/popw printed when in 16 bit data mode.
1797 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1798 print cbtw, cwtd in 16 bit data mode.
1799 * i386-dis.c (putop): extra case W to support above.
1801 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1802 address size prefix in 16 bit address mode.
1804 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1806 * sh-dis.c: Reindent. Rename local variable fprintf to
1809 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1811 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1813 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1815 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1817 * mips16-opc.c (mip16_opcodes): same.
1819 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1821 * m68k-opc.c (moveb): Change $d to %d.
1823 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1825 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1826 (twobyte_has_modrm): Likewise.
1828 (OP_MMX, OP_EM, OP_MS): New static functions.
1830 * i386-dis.c: Revert patch of April 4. The output now matches
1833 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1835 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1838 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1840 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1842 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1844 * Makefile.in (install): Depend upon installdirs.
1845 (installdirs): New target.
1847 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1849 From Thomas Graichen <graichen@rzpd.de>:
1850 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1851 * configure: Rebuild.
1853 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1855 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1856 Delete string{,s}.h support.
1858 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1860 * cgen-asm.c (cgen_parse_operand_fn): New global.
1861 (cgen_parse_{{,un}signed_integer,address}): Update call to
1862 cgen_parse_operand_fn.
1863 (cgen_init_parse_operand): New function.
1864 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1865 from cgen_asm_init_parse.
1866 (m32r_cgen_assemble_insn): New operand `errmsg'.
1867 Delete call to as_bad, return error message to caller.
1868 (m32r_cgen_asm_hash_keywords): #if 0 out.
1870 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1872 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1874 [case 'J']: Fix typo in register name.
1876 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1878 * configure.in: Substitute SHLIB_LIBS.
1879 * configure: Rebuild.
1880 * Makefile.in (SHLIB_LIBS): New variable.
1881 ($(SHLIB)): Use $(SHLIB_LIBS).
1883 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1885 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1887 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1889 * disassemble.c (disassembler): Handle m32r.
1891 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1893 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1894 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1895 * Makefile.in (CFILES): Add them.
1896 (ALL_MACHINES): Add them.
1897 (dependencies): Regenerate.
1898 * configure.in (cgen_files): New variable.
1899 (bfd_m32r_arch): Add entry.
1900 * configure: Regenerate.
1902 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1904 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1905 * configure: Rebuild.
1907 * Makefile.in: Rebuild dependencies.
1909 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1911 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1914 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1916 * Branched binutils 2.8.
1918 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1920 * m10200-dis.c: Rename from mn10200-dis.c.
1921 * m10200-opc.c: Rename from mn10200-opc.c.
1922 * m10300-dis.c: Rename from mn10300-dis.c
1923 * m10300-opc.c: Rename from mn10300-opc.c.
1924 * Makefile.in: Update accordingly.
1926 * mips16-opc.c: Add mul and dmul macros.
1928 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1930 * makefile.vms: Update CFLAGS, add clean target.
1932 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1934 * mips-opc.c: Add "wait". From Ralf Baechle
1935 <ralf@gnu.ai.mit.edu>.
1937 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1938 * configure, config.in: Rebuild.
1939 * sysdep.h: Include <stdlib.h> if it exists.
1940 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1942 * Makefile.in: Rebuild dependencies.
1944 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1946 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1947 Andrew Bray <andy@madhouse.demon.co.uk>.
1949 * mips-opc.c: Add cast when setting mips_opcodes.
1951 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1953 * v850-dis.c (disassemble): Fix sign extension problem.
1954 * v850-opc.c (extract_d*): Fix sign extension problems to make
1955 disassembly calculate branch offsets correctly.
1957 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1959 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1961 * mips-opc.c: Add dctr and dctw.
1964 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1966 * d30v-dis.c (print_insn): Change the way signed constants
1969 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1971 * Makefile.in (BFD_H): New variable.
1972 (HFILES): New variable.
1973 (CFILES): Add all C files.
1974 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1975 Delete old dependencies, and build new ones.
1976 * dep-in.sed: New file.
1978 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1980 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1982 start-sanitize-coldfire
1983 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1985 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1988 end-sanitize-coldfire
1989 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1991 * mn10200-opc.c: Change "trap" to "syscall".
1992 * mn10300-opc.c: Add new "syscall" instruction.
1994 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1996 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1997 mulul insns on the coldfire.
1999 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2001 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2002 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2003 (print_insn_little_arm): Likewise.
2005 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2007 Based on patches from H.J. Lu <hjl@lucon.org>:
2008 * i386-dis.c (fetch_data): Add prototype.
2009 * m68k-dis.c (fetch_data): Add prototype.
2010 (dummy_print_address): Add prototype. Make static.
2011 * ppc-opc.c (valid_bo): Add prototype.
2012 * sparc-dis.c (build_hash_table): Add prototype.
2013 (is_delayed_branch, compute_arch_mask): Add prototypes.
2014 (print_insn_sparc): Make several local variables const.
2015 (compare_opcodes): Change arguments to const PTR. Add prototype.
2016 * sparc-opc.c (arg): Change name field to be const.
2017 (lookup_name, lookup_value): Add prototypes. Change table and
2018 name parameters to be const.
2019 (sparc_encode_asi): Change name parameter to be const.
2020 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2021 (sparc_encode_sparclet_cpreg): Likewise.
2022 (sparc_decode_asi): Change return type to be const.
2023 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2024 (sparc_decode_sparclet_cpreg): Likewise.
2026 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2028 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2029 Solaris doesn't like the combined options, and the -f is
2031 (stamp-tshlink, install): Likewise.
2033 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2035 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2038 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2040 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2042 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2044 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2047 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2049 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2051 start-sanitize-tic80
2052 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2054 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2056 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2058 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2061 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2063 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2064 floatformat_to_double to make portable.
2065 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2068 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2070 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2071 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2073 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2075 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2076 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2078 start-sanitize-tic80
2079 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2081 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2082 (OFF_SL_BR_SCALED): ... to this, and added the flag
2083 TIC80_OPERAND_BASEREL to the flags word.
2084 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2088 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2090 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2091 Change mips_opcodes from const array to a pointer,
2092 and change bfd_mips_num_opcodes from const int to int,
2093 so that we can increase the size of the mips opcodes table
2096 start-sanitize-tic80
2097 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2099 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2100 store BITNUM values in the table in one's complement form
2101 to match behavior when assembler is given a raw numeric
2102 value for a BITNUM operand.
2103 * tic80-dis.c (print_operand_bitnum): Ditto.
2107 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2109 * d30v-opc.c: Removed references to FLAG_X.
2112 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2114 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2117 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2119 * Makefile.in: Added d30v object files.
2120 * configure: (bfd_d30v_arch) Rebuilt.
2121 * configure.in: (bfd_d30v_arch) Added new case.
2122 * d30v-dis.c: New file.
2123 * d30v-opc.c: New file.
2124 * disassemble.c (disassembler) Add entry for d30v.
2127 start-sanitize-tic80
2128 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2130 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2131 representations for the floating point BITNUM values.
2133 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2135 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2136 in the table in one's complement form, as they appear in the
2138 (tic80_symbol_to_value): Use macros to access predefined
2140 (tic80_value_to_symbol): Ditto.
2141 (tic80_next_predefined_symbol): New function.
2142 * tic80-dis.c (print_operand_bitnum): Remove code that did
2143 one's complement for BITNUM values.
2146 start-sanitize-r5900
2147 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2149 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2152 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2154 * makefile.vms: Remove 8 bit characters. Update to latest
2157 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2159 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2161 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2163 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2164 (IMM24_PCREL): Likewise.
2166 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2168 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2169 address for an extended PC relative instruction that is not a
2172 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2174 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2177 start-sanitize-tic80
2178 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2180 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2181 (tic80_opcodes): Sort entries so that long immediate forms
2182 come after short immediate forms, making it easier for
2183 assembler to select the right one for a given operand.
2186 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2188 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2190 (print_insn_mips16): Likewise.
2192 start-sanitize-r5900
2193 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2195 * mips-opc.c: add r5900.
2198 start-sanitize-tic80
2199 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2201 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2202 a symbol class that restricts translation to just that
2203 class (general register, condition code, etc).
2205 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2207 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2208 and REG_DEST_E for register operands that have to be
2209 an even numbered register. Add REG_FPA for operands that
2210 are one of the floating point accumulator registers.
2211 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2212 (tic80_opcodes): Change entries that need even numbered
2213 register operands to use the new operand table entries.
2214 Add "or" entries that are identical to "or.tt" entries.
2217 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2219 * mips16-opc.c: Add new cases of exit instruction for
2221 * mips-dis.c (print_mips16_insn_arg): Display floating point
2222 registers in operands of exit instruction. Print `$' before
2223 register names in operands of entry and exit instructions.
2225 start-sanitize-tic80
2226 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2228 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2229 pairs for all predefined symbols recognized by the assembler.
2230 Also used by the disassembling routines.
2231 (tic80_symbol_to_value): New function.
2232 (tic80_value_to_symbol): New function.
2233 * tic80-dis.c (print_operand_control_register,
2234 print_operand_condition_code, print_operand_bitnum):
2235 Remove private tables and use tic80_value_to_symbol function.
2238 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2240 * d10v-dis.c (print_operand): Change address printing
2241 to correctly handle PC wrapping. Fixes PR11490.
2243 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2245 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2248 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2250 * mips-dis.c (print_insn_mips16): Set insn_info information.
2251 (print_mips16_insn_arg): Likewise.
2253 * mips-dis.c (print_insn_mips16): Better handling of an extend
2254 opcode followed by an instruction which can not be extended.
2256 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2258 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2259 coldfire moveb instruction to not allow an address register as
2260 destination. Although the documentation does not indicate that
2261 this is invalid, experiments uncovered unexpected behavior.
2262 Added a comment explaining the situation. Thanks to Andreas
2263 Schwab for pointing this out to me.
2265 start-sanitize-tic80
2266 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2268 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2269 entries are presorted so that entries with the same mnemonic are
2270 adjacent to each other in the table. Sort the entries for each
2271 instruction so that this is true.
2274 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2276 * m68k-dis.c: Include <libiberty.h>.
2277 (print_insn_m68k): Sort the opcode table on the most significant
2278 nibble of the opcode.
2280 start-sanitize-tic80
2281 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2283 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2284 "vsub", "vst", "xnor", and "xor" instructions.
2285 (V_a1): Renamed from V_a, msb of accumulator reg number.
2286 (V_a0): Add macro, lsb of accumulator reg number.
2288 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2290 * tic80-dis.c (print_insn_tic80): Broke excessively long
2291 function up into several smaller ones and arranged for
2292 the instruction printing function to be callable recursively
2293 to print vector instructions that have both a load and a
2294 math instruction packed into a single opcode.
2295 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2296 to explain why it comes after the other vector opcodes.
2299 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2301 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2302 move insns to handle immediate operands.
2304 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2306 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2307 fix operand mask in the "moveml" entries for the coldfire.
2309 start-sanitize-tic80
2310 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2312 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2313 New macros for building vector instruction opcodes.
2314 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2315 FMT_LI, which were unused. The field is now a flags field.
2316 Remove some opcodes that are possible, but illegal, such
2317 as long immediate instructions with doubles for immediate
2318 values. Add "vadd" and "vld" instructions.
2320 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2322 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2323 the order more logical. Move the shift alias instructions ("rotl",
2324 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2325 interspersed with the regular sr.x and sl.x instructions. Add
2326 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2327 "sub", "subu", "swcr", and "trap".
2329 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2331 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2332 (OFF_SL_PC): Renamed from OFF_SL.
2333 (OFF_SS_BR): New operand type for base relative operand.
2334 (OFF_SL_BR): New operand type for base relative operand.
2335 (REG_BASE): New operand type for base register operand.
2336 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2337 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2338 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2340 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2341 10 char field, padded with spaces on rhs, rather than a string
2342 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2343 than old TIC80_OPERAND_RELATIVE. Add support for new
2344 TIC80_OPERAND_BASEREL flag bit.
2346 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2348 * tic80-dis.c (print_insn_tic80): Print floating point operands
2350 * tic80-opc.c (SPFI): Add single precision floating point
2351 immediate operand type.
2352 (ROTATE): Add rotate operand type for shifts.
2353 (ENDMASK): Add for shifts.
2354 (n): Macro for the 'n' bit.
2355 (i): Macro for the 'i' bit.
2356 (PD): Macro for the 'PD' field.
2357 (P2): Macro for the 'P2' field.
2358 (P1): Macro for the 'P1' field.
2359 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2363 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2365 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2366 adding in current address for pc-relative operands.
2368 start-sanitize-tic80
2369 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2371 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2372 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2373 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2374 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2375 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2376 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2377 (REG_SCALED, LSI_SCALED): New operand types.
2378 (E): New macro for 'E' bit at bit 27.
2379 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2380 opcodes, including the various size flavors (b,h,w,d) for
2381 the direct load and store instructions.
2383 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2385 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2387 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2388 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2389 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2390 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2391 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2392 masks with "MASK_* & ~M_*" to get the M bit reset.
2393 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2395 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2397 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2398 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2399 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2401 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2402 CC, SICR, and LICR table entries.
2403 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2404 "bcnd", and "brcr" opcodes.
2407 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2409 * ppc-opc.c (powerpc_operands): Make comment match the
2410 actual fields (no shift field).
2411 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2412 start-sanitize-tic80
2413 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2414 partial implementation, work in progress.
2415 * tic80-opc.c (tic80_operands): Begin construction operands table.
2416 (tic80_opcodes): Continue populating opcodes table and start
2417 filling in the operand indices.
2418 (tic80_num_opcodes): Add this.
2421 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2423 * m68k-opc.c: Add #B case for moveq.
2425 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2427 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2428 before they are used.
2430 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2432 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2433 for "breakpoint" instruction.
2435 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2437 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2438 (dep): Use ALL_CFLAGS rather than CFLAGS.
2440 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2442 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2445 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2447 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2448 start-sanitize-tic80
2449 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2452 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2454 * mips16-opc.c: Add "abs".
2456 start-sanitize-tic80
2457 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2459 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2460 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2461 (disassembler): Add bfd_arch_tic80 support to set disassemble
2462 to print_insn_tic80.
2463 * tic80-dis.c (print_insn_tic80): Add stub.
2465 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2467 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2468 * configure: Regenerate with autoconf.
2469 * tic80-dis.c: Add file.
2470 * tic80-opc.c: Add file.
2473 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2475 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2477 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2479 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2480 (mn10200_opcodes): Use it for some logicals and btst insns.
2481 Add "break" and "trap" instructions.
2483 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2485 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2487 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2489 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2490 relative load or add now depends upon whether the instruction is
2493 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2495 * mn10200-dis.c: Finish writing disassembler.
2496 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2497 Fix mask for "jmp (an)".
2499 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2500 handle endianness issues for mn10300.
2502 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2504 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2506 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2507 instruction. Fix opcode field for "movb (imm24),dn".
2509 * mn10200-opc.c (mn10200_operands): Fix insertion position
2512 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2514 * mn10200-opc.c: Create mn10200 opcode table.
2515 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2516 but moving along nicely.
2518 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2520 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2522 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2524 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2525 specifiers for fmovem* instructions.
2527 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2529 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2531 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2533 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2536 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2538 * mn10300-opc.c: Add some comments explaining the various
2541 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2543 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2545 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2548 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2549 operand specifiers in fmovm* instructions.
2551 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2553 * ppc-opc.c (insert_li): Give an error if the offset has the two
2554 least significant bits set.
2556 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2558 * mips-dis.c (print_insn_mips16): Separate the instruction from
2559 the arguments with a tab, not a space.
2561 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2563 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2566 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2569 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2571 * configure: Rebuild with autoconf 2.12.
2573 Add support for mips16 (16 bit MIPS implementation):
2574 * mips16-opc.c: New file.
2575 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2576 (mips16_reg_names): New static array.
2577 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2578 after seeing a 16 bit symbol.
2579 (print_insn_little_mips): Likewise.
2580 (print_insn_mips16): New static function.
2581 (print_mips16_insn_arg): New static function.
2582 * mips-opc.c: Add jalx instruction.
2583 * Makefile.in (mips16-opc.o): New target.
2584 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2585 * configure: Rebuild.
2587 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2589 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2590 operand specifiers in *save, *restore and movem* instructions.
2592 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2595 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2596 register operands for immediate arithmetic, not, neg, negx, and
2597 set according to condition instructions.
2599 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2600 specifier of the effective-address operand in immediate forms of
2601 arithmetic instructions. The specifier for the immediate operand
2602 notes how and where the constant will be stored.
2604 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2606 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2609 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2612 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2614 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2616 * mn10300-dis.c (disassemble): Handle register lists.
2618 * mn10300-opc.c: Fix handling of register list operand for
2619 "call", "ret", and "rets" instructions.
2621 * mn10300-dis.c (disassemble): Print PC-relative and memory
2622 addresses symbolically if possible.
2623 * mn10300-opc.c: Distinguish between absolute memory addresses,
2624 pc-relative offsets & random immediates.
2626 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2628 (disassemble): Handle SPLIT and EXTENDED operands.
2630 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2632 * mn10300-dis.c: Rough cut at printing some operands.
2634 * mn10300-dis.c: Start working on disassembler support.
2635 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2637 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2639 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2641 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2643 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2645 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2647 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2648 register argument is calls and jmp instructions.
2650 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2652 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2653 getx operand. Fix opcode for mulqu imm,dn.
2655 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2657 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2658 in MN10300_OPERAND_SPLIT operands for how many bits
2659 appear in the basic insn word. Add IMM32_HIGH24,
2660 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2661 (mn10300_opcodes): Use new operands as needed.
2663 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2664 for bset, bclr, btst instructions.
2665 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2667 * mn10300-opc.c (mn10300_operands): Remove many redundant
2668 operands. Update opcode table as appropriate.
2669 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2670 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2672 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2674 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2675 operands (for indexed load/stores). Fix bitpos for DI
2676 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2677 few instructions that insert immediates/displacements in the
2678 middle of the instruction. Add IMM8E for 8 bit immediate in
2679 the extended part of an instruction.
2680 (mn10300_operands): Use new opcodes as appropriate.
2682 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2684 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2685 sequential so the assembler never parallelizes it with
2688 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2690 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2691 a data/address register that appears in register field 0
2692 and register field 1.
2693 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2695 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2697 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2698 standard disassembly.
2700 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2701 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2702 Recategorize PALcode instructions.
2704 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2706 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2708 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2710 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2711 there are no operand types.
2713 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2715 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2717 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2719 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2721 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2723 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2725 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2726 and sst.w instructions.
2728 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2731 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2733 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2736 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2738 * ppc-opc.c (PPCPWR2): Define.
2739 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2742 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2744 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2745 field for movhu instruction.
2747 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2748 cast value to "long" not "signed long" to keep hpux10
2751 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2753 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2756 * mn10300-opc.c (FMT*): Remove definitions.
2758 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2759 for shift-by-register opcodes.
2761 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2762 into [AD][MN][01] for encoding the position of the register
2765 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2767 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2768 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2770 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2772 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2773 Fix various typos. Add "PAREN" operand.
2774 (MEM, MEM2): Define.
2775 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2776 operands. Fix several typos.
2778 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2781 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2783 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2784 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2786 (mn10300_opcodes): Break opcode format out into its own field.
2787 Update many operand fields to deal with signed vs unsigned
2788 issues. Fix one or two typos in the "mov" instruction
2789 opcode, mask and/or operand fields.
2791 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2793 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2794 m68851 wasn't reset.
2796 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2798 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2799 all opcodes. Very rough cut at operands for all opcodes.
2801 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2804 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2806 * mn10200-opc.c, mn10300-opc.c: New files.
2807 * mn10200-dis.c, mn10300-dis.c: New files.
2808 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2809 * disassemble.c: Break mn10x00 support into 10200 and 10300
2811 * configure.in: Likewise.
2812 * configure: Rebuilt.
2814 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2816 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2818 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2820 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2822 * disassemble (ARCH_mn10x00): Define.
2823 (disassembler): Handle bfd_arch_mn10x00.
2824 * configure.in: Recognize bfd_mn10x00_arch.
2825 * configure: Rebuilt.
2827 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2829 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2830 accordingly. Don't declare functions using op_rtn.
2832 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2834 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2835 params to be more standard.
2836 * (disassemble): Print absolute addresses and symbolic names for
2837 branch and jump targets.
2838 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2840 * (v850_opcodes): Add breakpoint insn.
2842 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2844 * m68k-opc.c: Move the fmovemx data register cases before the
2845 other cases, so that they get recognized before the data register
2846 does gets treated as a degenerate register list.
2848 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2850 * mips-opc.c: Add a case for "div" and "divu" with two registers
2851 and a destination of $0.
2853 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2855 * mips-dis.c (print_insn_arg): Add prototype.
2856 (_print_insn_mips): Ditto.
2858 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2860 * mips-dis.c (print_insn_arg): Print condition code registers as
2863 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2865 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2867 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2869 * v850-dis.c (disassemble): Make static. Provide prototype.
2871 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2873 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2876 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2878 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2879 ']' characters into the output stream.
2880 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2881 Add "memop" field to all opcodes (for the disassembler).
2882 Reorder opcodes so that "nop" comes before "mov" and "jr"
2883 comes before "jarl".
2885 * v850-dis.c (print_insn_v850): Fix typo in last change.
2887 * v850-dis.c (print_insn_v850): Properly handle disassembling
2888 a two byte insn at the end of a memory region when the memory
2889 region's size is only two byte aligned.
2891 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2893 * v850-dis.c (v850_reg_names): Define.
2894 (v850_sreg_names, v850_cc_names): Likewise.
2895 (disassemble): Very rough cut at printing operands (unformatted).
2897 * v850-opc.c (BOP_MASK): Fix.
2898 (v850_opcodes): Fix mask for jarl and jr.
2900 * v850-dis.c: New file. Skeleton for disassembler support.
2901 * Makefile.in Remove v850 references, they're not needed here.
2902 * configure.in: Add v850-dis.o when building v850 toolchains.
2903 * configure: Rebuilt.
2904 * disassemble.c (disassembler): Call v850 disassembler.
2906 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2907 (insert_d8_6, extract_d8_6): New functions.
2908 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2909 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2911 (IF4A, IF4B): Use "D7" instead of "D7S".
2912 (IF4C, IF4D): Use "D8_7" instead of "D8".
2913 (IF4E, IF4F): New. Use "D8_6".
2914 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2915 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2917 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2918 (v850_operands): Change D16 to D16_15, use special insert/extract
2919 routines. New new D16 that uses the generic insert/extract code.
2920 (IF7A, IF7B): Use D16_15.
2921 (IF7C, IF7D): New. Use D16.
2922 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2924 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2925 message. Issue an error if the branch offset is odd.
2927 * v850-opc.c: Add notes about needing special insert/extract
2928 for all the load/store insns, except "ld.b" and "st.b".
2930 * v850-opc.c (insert_d22, extract_d22): New functions.
2931 (v850_operands): Use insert_d22 and extract_d22 for
2933 (insert_d9): Fix range check.
2935 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2937 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2938 and set bits field to D9 and D22 operands.
2940 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2942 * v850-opc.c (v850_operands): Define SR2 operand.
2943 (v850_opcodes): "ldsr" uses R1,SR2.
2945 * v850-opc.c (v850_opcodes): Fix opcode specs for
2946 sld.w, sst.b, sst.h, sst.w, and nop.
2948 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2950 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2951 end of the opcode table.
2953 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2955 * d10v-opc.c (pre_defined_registers): Added register pairs,
2956 "r0-r1", "r2-r3", etc.
2958 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2960 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2961 Create I16U for an unsigned 16bit mmediate operand.
2962 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2964 * v850-opc.c (v850_operands): Define EP operand.
2965 (IF4A, IF4B, IF4C, IF4D): Use EP.
2967 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2968 with immediate operand, "movhi". Tweak "ldsr".
2970 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2971 correct. Get sld.[bhw] and sst.[bhw] closer.
2973 * v850-opc.c (v850_operands): "not" is a two byte insn
2975 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2977 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2979 * v850-opc.c (two): Get order of words correct.
2981 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2983 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2984 register source and destination operands.
2985 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2987 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2988 same thinko in "trap" opcode.
2990 * v850-opc.c (v850_opcodes): Add initializer for size field
2993 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2994 Add D8 for 8-bit unsigned field in short load/store insns.
2995 (IF4A, IF4D): These both need two registers.
2996 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2997 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2998 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2999 for "ldsr" and "stsr".
3000 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3003 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3004 short store word (sst.w).
3006 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3008 * v850-opc.c (v850_operands): Added insert and extract fields,
3009 pointers to functions that handle unusual operand encodings.
3011 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3013 * v850-opc.c (v850_opcodes): Enable "trap".
3015 * v850-opc.c (v850_opcodes): Fix order of displacement
3016 and register for "set1", "clr1", "not1", and "tst1".
3018 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3020 * v850-opc.c (v850_operands): Add "B3" support.
3021 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3024 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3026 * v850-opc.c: Close unterminated comment.
3028 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3030 * v850-opc.c (v850_operands): Add flags field.
3031 (v850_opcodes): add move opcodes.
3033 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3035 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3036 * configure: (bfd_v850v_arch) Add new case.
3037 * configure.in: (bfd_v850_arch) Add new case.
3038 * v850-opc.c: New file.
3040 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3042 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3044 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3046 * d10v-opc.c: Add additional information to the opcode
3047 table to help determinine which instructions can be done
3050 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3052 * mpw-make.sed: Update editing of include pathnames to be
3055 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3057 * arm-opc.h: Added "bx" instruction definition.
3059 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3061 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3063 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3065 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3067 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3069 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3071 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3073 * makefile.vms: Update for alpha-opc changes.
3075 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3077 * i386-dis.c (print_insn_i386): Actually return the correct value.
3078 (ONE, OP_ONE): #ifdef out; not used.
3080 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3082 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3083 Changed subi operand type to treat 0 as 16.
3085 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3087 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3090 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3092 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3093 memory transfer instructions. Add new format string entries %h and %s.
3094 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3097 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3099 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3100 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3102 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3104 * alpha-dis.c (print_insn_alpha_osf): Remove.
3105 (print_insn_alpha_vms): Remove.
3106 (print_insn_alpha): Make globally visible. Chose the register
3107 names based on info->flavour.
3108 * disassemble.c: Always return print_insn_alpha for the alpha.
3110 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3112 * d10v-dis.c (dis_long): Handle unknown opcodes.
3114 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3116 * d10v-opc.c: Changes to support signed and unsigned numbers.
3117 All instructions with the same name that have long and short forms
3118 now end in ".l" or ".s". Divs added.
3119 * d10v-dis.c: Changes to support signed and unsigned numbers.
3121 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3123 * d10v-dis.c: Change all functions to use info->print_address_func.
3125 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3127 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3128 move ccr/sr insns more strict so that the disassembler only
3129 selects them when the addressing mode is data register.
3131 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3132 * d10v-opc.c (pre_defined_registers): Declare.
3133 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3134 to pick a better name for the registers.
3136 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3138 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3139 operands for fexpand and fpmerge. From Christian Kuehnke
3140 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3142 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3144 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3145 print routine. Take new regnames and cpumask arguments.
3146 Kill the environment variable nonsense.
3147 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3148 (print_insn_alpha_vms): New function. Do VMS style regnames.
3149 * disassemble.c (disassembler): Test bfd flavour to pick
3150 between OSF and VMS routines. Default to OSF.
3152 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3154 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3155 * configure: Rebuild.
3156 * Makefile.in (install): Use @INSTALL_SHLIB@.
3158 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3160 * configure: (bfd_d10v_arch) Add new case.
3161 * configure.in: (bfd_d10v_arch) Add new case.
3162 * d10v-dis.c: New file.
3163 * d10v-opc.c: New file.
3164 * disassemble.c (disassembler) Add entry for d10v.
3166 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3168 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3169 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3171 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3173 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3174 distinguish between variants of the instruction set.
3175 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3176 distinguish between variants of the instruction set.
3178 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3180 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3181 the 8086 instruction set.
3182 * i386-dis.c: General cleanups. Make most things static. Add
3183 prototypes. Get rid of static variables aflags and dflags. Pass
3184 them as args (to almost everything).
3186 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3188 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3190 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3192 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3193 if the next arg is marked with SRC_IN_DST. Gross.
3195 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3196 we're looking for and find EXR.
3198 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3199 if we're looking for KBIT and we don't find it.
3201 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3204 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3205 3bit immediate operands.
3207 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3209 * Released binutils 2.7.
3211 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3212 <kkaempf@progis.ac-net.de>.
3214 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3216 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3218 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3220 * sparc-dis.c (print_insn_sparclite): New routine to print
3221 sparclite instructions.
3223 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3225 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3227 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3229 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3230 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3231 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3233 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3235 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3236 Use autoconf-set values.
3237 (docdir, oldincludedir): Removed.
3238 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3240 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3242 * alpha-opc.c: New file.
3243 * alpha-opc.h: Remove.
3244 * alpha-dis.c: Complete rewrite to use new opcode table.
3245 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3246 * configure: Rebuild with autoconf 2.10.
3247 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3248 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3250 (alpha-opc.o): New target.
3252 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3254 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3255 Set imm_added_to_rs1 even if the source and destination register
3258 * sparc-opc.c: Add some two operand forms of the wr instruction.
3260 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3262 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3265 * disassemble.c (disassembler): Handle H8/S.
3266 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3268 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3270 * sparc-opc.c: Add beq/teq as aliases for be/te.
3272 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3273 <sergei@msil.sps.mot.com>.
3275 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3277 * makefile.vms: New file.
3279 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3281 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3283 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3286 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3288 * i386-dis.c (OP_OFF): Call append_prefix.
3290 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3292 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3293 unsigned long to silence a warning from the Solaris PowerPC
3296 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3298 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3300 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3302 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3304 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3305 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3306 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3307 cpush, cpusha, cpull sparclet insns.
3309 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3311 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3313 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3315 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3316 Set F_FLOAT on other floating point instructions.
3318 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3320 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3322 (powerpc_opcodes): Add 860/821 specific SPRs.
3324 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3326 * configure.in: Permit --enable-shared to specify a list of
3327 directories. Set and substitute BFD_PICLIST.
3328 * configure: Rebuild.
3329 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3330 uses. Set to @BFD_PICLIST@.
3332 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3334 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3335 not "abs", which may be needed for the absolute in something
3336 like btst #0,@10:8. Print L_3 immediates separately from other
3337 immediates. Change ABSMOV reference to ABS8MEM.
3339 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3341 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3342 (current_arch_mask): New static global.
3343 (compute_arch_mask): New static function.
3344 (print_insn_sparc): Delete sparc_v9_p. New static local
3345 current_mach. Resort opcode table if current_mach changes.
3346 Generalize "insn not supported" test.
3347 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3348 Delete test for v9/!v9.
3349 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3351 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3352 (brfcx): Renamed to FBRX.
3353 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3354 coprocessor mnemonics are not supported on the sparclet).
3355 (condf): Renamed to CONDF.
3356 (SLCBCC2): Delete F_ALIAS flag.
3358 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3360 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3361 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3363 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3365 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3366 that the shared library version number is set correctly.
3368 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3370 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3371 Miles Bader <miles@gnu.ai.mit.edu>.
3372 * configure: Rebuild.
3374 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3376 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3379 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3381 * configure: Rebuild with autoconf 2.8.
3383 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3385 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3386 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3388 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3390 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3391 since they appear as targets in Makefile.in.
3392 * configure: Rebuild.
3394 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3396 * mpw-make.sed: Edit out shared library support bits.
3398 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3400 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3401 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3402 (sparc_opcodes): Add sparclet insns.
3403 (sparclet_cpreg_table): New static local.
3404 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3405 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3407 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3409 * i386-dis.c (index16): New static variable.
3410 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3412 (OP_indirE): Return result of OP_E.
3413 (OP_E): Check for 16 bit addressing mode, and disassemble
3414 correctly. Optimised 32 bit case a little. Don't print
3415 "(base,index,scale)" when sib specifies only an offset.
3417 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3419 * configure.in: Set and substitute SHLIB_DEP.
3420 * configure: Rebuild.
3421 * Makefile.in (SHLIB_DEP): New variable.
3422 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3423 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3424 COMMON_SHLIB, add them to piclist with appropriate modifications.
3425 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3426 here: just use piclist.
3428 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3430 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3431 (print_insn_sparc): Rewrite v9/not-v9 tests.
3432 (compare_opcodes): Likewise.
3433 * sparc-opc.c (MASK_<ARCH>): Define.
3434 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3435 (sparclet,v6notv9): Define.
3436 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3437 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3439 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3441 * configure.in: Call AC_PROG_CC before configure.host.
3442 * configure: Rebuild.
3444 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3446 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3448 * i386-dis.c (onebyte_has_modrm): New static array.
3449 (twobyte_has_modrm): New static array.
3450 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3452 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3454 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3457 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3459 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3462 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3464 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3465 m68010up, not just m68020up | cpu32.
3467 * Makefile.in (SONAME): New variable.
3468 ($(SHLINK)): Make a link to the transformed name, as well.
3469 (stamp-tshlink): New target.
3470 (install): Skip stamp-tshlink during install.
3472 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3474 * configure.in: Call AC_ARG_PROGRAM.
3475 * configure: Rebuild.
3476 * Makefile.in (program_transform_name): New variable.
3477 (install): Transform library name before installing it.
3479 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3481 * i960-dis.c (mem): Add HX dcinva instruction.
3483 Support for building as a shared library, based on patches from
3484 Alan Modra <alan@spri.levels.unisa.edu.au>:
3485 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3486 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3487 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3488 * configure: Rebuild.
3489 * Makefile.in (ALLLIBS): New variable.
3490 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3491 (COMMON_SHLIB, SHLINK): New variables.
3492 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3493 (STAGESTUFF): Remove variable.
3494 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3495 (stamp-piclist, piclist): New targets.
3496 ($(SHLIB), $(SHLINK)): New targets.
3497 ($(OFILES)): Depend upon stamp-picdir.
3498 (disassemble.o): Build twice if PICFLAG is set.
3499 (MOSTLYCLEAN): Add pic/*.o.
3500 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3501 (distclean): Remove pic and stamp-picdir.
3502 (install): Install shared libraries.
3503 (stamp-picdir): New target.
3505 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3507 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3508 Print unknown instruction as "unknown", rather than in hex.
3510 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3512 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3514 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3516 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3518 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3520 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3521 when necessary. From Ulrich Drepper
3522 <drepper@myware.rz.uni-karlsruhe.de>.
3524 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3526 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3527 sparc_num_opcodes. Update architecture enum values.
3528 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3529 (sparc_opcode_lookup_arch): New function.
3530 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3531 (sparc_opcodes): Add v9a shutdown insn.
3533 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3535 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3536 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3538 (print_insn_sparc64): Deleted.
3539 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3542 * sparc-opc.c (architecture_pname): Add v9a.
3544 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3546 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3547 incorrectly defined as 0x16 when it should be 0x15.
3548 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3549 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3550 excb (exception barrier) which is defined in the Alpha
3551 Architecture Handbook version 2.
3552 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3553 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3554 disassembled as or, for example.
3556 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3558 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3559 (_print_insn_mips): Change i from int to unsigned int.
3561 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3563 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3564 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3566 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3568 * i386-dis.c: Added Pentium Pro instructions.
3570 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3572 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3575 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3577 * sh-opc.h (sh_nibble_type): Added REG_B.
3578 (sh_arg_type): Added A_REG_B.
3579 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3581 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3583 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3585 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3587 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3589 * Makefile.in (distclean): Remove stamp-h. From Ronald
3590 F. Guilmette <rfg@monkeys.com>.
3592 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3594 From David Mosberger-Tang <davidm@azstarnet.com>:
3595 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3598 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3600 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3601 (sh_table): Added many SH3 opcodes.
3602 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3604 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3606 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3607 (subco,subco.): Mark this PPC, not PPCCOM.
3609 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3611 * configure: Rebuild with autoconf 2.7.
3613 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3615 * configure: Rebuild with autoconf 2.6.
3617 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3619 * configure.in: Sort list of architectures. Accept but do nothing
3620 for alliant, convex, pyramid, romp, and tahoe.
3622 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3624 * a29k-dis.c (print_special): Change num to unsigned int.
3626 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3628 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3631 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3633 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3634 * configure: Rebuilt.
3636 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3638 * configure.in: Add case for bfd_i860_arch.
3639 * configure: Rebuild.
3641 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3643 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3644 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3645 (NEXTDOUBLE): Likewise.
3646 (print_insn_m68k): Don't match fmoveml if there is more than one
3647 register in the list.
3648 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3650 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3652 * m68k-opc.c: Use #W rather than #w.
3653 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3655 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3657 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3658 and likewise for all the dbxx opcodes.
3660 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3662 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3664 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3666 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3667 the VR4100 specific instructions to the mips_opcodes structure.
3669 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3671 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3672 ugly Metrowerks bug in CW6, is fixed in CW7.
3674 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3676 * ppc-opc.c (whole file): Add flags for common/any support.
3678 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3680 * Makefile.in (BISON): Remove macro.
3681 (FLAGS_TO_PASS): Remove BISON.
3683 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3685 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3687 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3688 instructions that take no args by looking at the match mask.
3689 (print_insn_arg): Always print "%" before register names.
3690 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3691 [case '_']: Don't print "@#" before address.
3692 [case 'J']: Use "%s" as format string, not register name.
3693 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3695 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3697 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3700 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3702 From David Mosberger-Tang <davidm@azstarnet.com>
3704 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3705 (alpha_insn_set): added definitions for VAX floating point
3706 instructions (Unix compilers don't generate these, but handcoded
3707 assembly might still use them).
3709 * alpha-dis.c (print_insn_alpha): added support for disassembling
3710 the miscellaneous instructions in the Alpha instruction set.
3712 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3714 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3715 no longer create sysdep.h, sed ppc-opc.c to work around a
3716 serious Metrowerks C bug.
3717 * mpw-make.in: Remove.
3718 * mpw-make.sed: New file, used by mpw-configure to edit
3719 Makefile.in into an MPW makefile.
3721 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3723 * Makefile.in (maintainer-clean): New synonym for realclean.
3725 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3727 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3728 which use '0', '1', and '2' instead. Specify the proper size for
3729 a pmove immediate operand. Correct the pmovefd patterns to be
3730 moves to a register, not from a register.
3731 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3733 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3735 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3736 %psr, %wim, %tbr as F_NOTV9.
3738 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3740 * Makefile.in (Makefile): Just rebuild Makefile when running
3742 (config.h, stamp-h): New targets.
3743 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3744 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3745 rebuilding config.h.
3746 * configure: Rebuild.
3748 * mips-opc.c: Change unaligned loads and stores with "t,A"
3749 operands to use "t,A(b)".
3751 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3753 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3755 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3757 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3758 until 3 instead of until 2.
3760 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3762 * Makefile.in (ALL_CFLAGS): Define.
3763 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3764 (MOSTLYCLEAN): Add config.log.
3765 (distclean): Don't remove config.log.
3766 * configure.in: Substitute HDEFINES.
3767 * configure: Rebuild.
3769 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3771 * sh-opc.h (sh_arg_type): Add F_FR0.
3772 (sh_table, case fmac): Add F_FR0 as first argument.
3774 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3776 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3778 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3780 * sparc-dis.c: Remove all references to NO_V9.
3782 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3784 * aclocal.m4: Just include ../bfd/aclocal.m4.
3785 * configure: Rebuild.
3787 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3789 * sparc-dis.c (X_DISP19): Define.
3790 (print_insn, case 'G'): Use it.
3791 (print_insn, case 'L'): Sign extend displacement.
3793 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3795 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3796 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3797 host_makefile_frag or frags.
3798 * aclocal.m4: New file.
3799 * configure: Rebuild.
3800 * Makefile.in (INSTALL): Set to @INSTALL@.
3801 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3802 (INSTALL_DATA): Set to @INSTALL_DATA@.
3804 (AR_FLAGS): Set to rc rather than qc.
3805 (CC): Define as @CC@.
3806 (CFLAGS): Set to @CFLAGS@.
3807 (@host_makefile_frag@): Remove.
3808 (config.status): Remove dependency upon @frags@.
3810 * configure.in: ../bfd/config.bfd now just sets shell variables.
3811 Use them rather than looking through target Makefile fragments.
3812 * configure: Rebuild.
3814 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3816 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3818 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3820 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3821 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3824 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3825 (lookup_{name,value}): New functions.
3826 (prefetch_table): New static local.
3827 (sparc_{encode,decode}_prefetch): New functions.
3828 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3830 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3832 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3835 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3837 * sh-dis.c: Correct comment on first line of file.
3839 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3841 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3843 * sparc-opc.c (asi, membar): New static locals.
3844 (sparc_{encode,decode}_{asi,membar}): New functions.
3845 (sparc_opcodes, membar insn): Fix.
3846 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3847 Support decoding of membar masks.
3850 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3852 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3854 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3856 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3857 and likewise for the other branches. Add bhs as an alias for bcc,
3858 and likewise for the size variants. Add dbhs as an alias for
3861 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3863 * sh-opc.h (FP sts instructions): Update to match reality.
3865 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3867 * m68k-dis.c: (fpcr_names): Add % before all register names.
3868 (reg_names): Likewise.
3869 (print_insn_arg): Don't explicitly print % before register names.
3870 Add % before register names in static array names. In case 'r',
3871 print data registers as `@(Dn)', not `Dn@'. When printing a
3872 memory address, don't print @# before it.
3873 (print_indexed): Change base_disp and outer_disp from int to
3874 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3875 syntax. Sign extend 8 byte displacement correctly.
3876 (print_base): Print using MIT syntax. Print zpc when appropriate.
3877 Change parameter disp from int to bfd_vma.
3879 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3882 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3884 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3885 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3886 * sh-opc.h (sh_arg_type): Add new operand types.
3887 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3889 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3891 * Makefile.in (distclean): Remove generated file config.h.
3893 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3895 * Makefile.in (distclean): Remove generated file config.h.
3897 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3899 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3901 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3903 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3904 rather than numopcodes. Use m68k_opcodes rather than removed
3905 opcode function. Don't check F_ALIAS.
3906 (print_insn_arg): Change first parameter to be const char *.
3907 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3908 (m68k-opc.o): New target.
3909 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3910 * configure: Rebuild.
3912 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3914 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3915 (opcode_bits, opcode_hash_table): New variables.
3916 (opcodes_initialized): Renamed from opcodes_sorted.
3917 (build_hash_table): New function.
3918 (is_delayed_branch): Use hash table.
3919 (print_insn): Renamed from print_insn_sparc, made static.
3920 Build and use hash table. If !sparc64, ignore sparc64 insns,
3921 and vice-versa if sparc64.
3922 (print_insn_sparc, print_insn_sparc64): New functions.
3923 (compare_opcodes): Move sparc64 opcodes to end.
3924 Print commutative insns with constant second.
3925 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3927 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3929 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3930 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3931 avoids printing a delay slot in a delay slot.
3932 * sh-opc.h (sh_table): Fully bracket last entry.
3934 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3936 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3938 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3940 * configure.in: Get host_makefile_frag from ${srcdir}.
3942 * configure.in: Autoconfiscated. Check for string[s].h. Create
3943 config.h from config.in. Don't set up sysdep.h link.
3944 * sysdep.h: New file.
3945 * configure, config.in: New files, generated from configure.in.
3946 * Makefile.in: Updated to be processed autoconf-style.
3947 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3948 (Makefile): Depend on config.status.
3949 (config.status): New rule.
3950 * configure.bat: Update Makefile substitutions.
3952 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3954 * mips-opc.c (L1): Define.
3955 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3956 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3959 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3961 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3962 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3963 have multiple add units but only a single logical unit.
3965 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3966 shifted by 18, without any insertion or extraction function.
3967 (insert_cr, extract_cr): Remove.
3969 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3971 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3974 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3976 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3977 * sh-opc.h: Add copyright.
3979 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3981 * Makefile.in (crunch-m68k): Delete extra target accidentally
3982 checked in a while ago.
3984 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3986 * sh-opc.h (sh_table): Add SH3 support.
3988 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3990 * sh-opc.h: Added bsrf and braf.
3992 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3994 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3995 bogus [ls]fm{ea,fd} patterns.
3997 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3998 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3999 initialize it from memory. Make function static.
4000 (print_insn_{big,little}_arm): New functions.
4001 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4002 the correct endianness.
4004 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4006 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4009 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4011 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4012 17th, so that it builds again using GCC as the compiler.
4014 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4016 * mips-dis.c (print_insn_little_mips): Cast return value from
4017 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4018 expects an unsigned long, and that might be fewer words of
4019 argument storage (e.g., if bfd_vma is long long on a 32-bit
4021 (print_insn_big_mips): Likewise with bfd_getb32 value.
4022 (_print_insn_mips): Now static.
4024 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4026 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4027 gcc memory hog problem with initializer is fixed.
4029 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4031 Merge in support for Mac MPW as a host.
4032 (Old change descriptions retained for informational value.)
4034 * mpw-config.in (archname): Compute from the config.
4035 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4037 * mpw-config.in (target_arch): Compute from canonical target.
4038 (m68k, mips, powerpc, sparc): Add architectures.
4039 * mpw-make.in (disassemble.c.o): Add.
4040 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4042 * mpw-config.in (BFD_MACHINES): Set to a default value.
4043 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4045 * mpw-make.in (CSEARCH): Add extra-include to search path.
4047 * mpw-config.in (varargs.h): Don't create.
4048 (sysdep.h): Create using forward-include.
4049 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4051 * mpw-config.in: New file, MPW version of configure.in.
4052 * mpw-make.in: New file, MPW version of Makefile.in.
4054 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4056 * alpha-dis.c (print_insn_alpha): Put empty statement after
4059 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4061 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4062 (low_sign_extend): Likewise.
4063 (get_field): Delete unused function.
4064 (set_field, deposit_14, deposit_21): Likewise.
4066 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4068 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4071 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4073 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4075 * alpha-opc.h (OSF_ASMCODE): define
4076 print pal-code names as defined in App C of the
4077 Alpha Architecture Reference Manual
4079 * alpha-dis.c: cleaned up output
4080 print stylized code forms as defined in App A.4.3 of the
4081 Alpha Architecture Reference Manual
4083 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4085 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4087 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4090 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4092 * m68k-dis.c (opcode): New function. Returns address of opcode
4093 table entry given index, even if the opcode table was split to
4094 work around gcc bugs.
4095 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4097 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4098 (reg_names): Now const.
4099 (print_insn_arg): Arrays cacheFieldName and names now const.
4100 (print_indexed): Array scales now const.
4102 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4104 * ppc-opc.c: Sort recently added instructions by minor opcode
4105 number within major opcode number.
4107 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4109 * hppa-dis.c: Include libhppa.h.
4111 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4113 * mips-opc.c: Change dli to use M_DLI, and add dla.
4115 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4117 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4119 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4121 * mips-opc.c: Add r4650 mul instruction.
4123 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4125 * mips-opc.c: Add uld and usd macros for unaligned double load and
4128 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4130 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4131 mfdcr, mtdcr, icbt, iccci.
4133 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4135 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4136 signed char fields to shorts, more portable.
4138 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4140 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4141 char fields as signed chars, since they may have negative values.
4143 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4145 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4146 (mycroft@netbsd.org).
4148 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4150 From "Logg, Ed" <elogg@ea.com>:
4151 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4152 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4155 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4157 * ppc-opc.c: Changes based on patch from David Edelsohn
4158 <edelsohn@mhpcc.edu>.
4159 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4162 (insert_tbr): New static function.
4163 (extract_tbr): New static function.
4164 (XFXFXM_MASK, XFXM): Define.
4165 (XSPRBAT_MASK, XSPRG_MASK): Define.
4166 (powerpc_opcodes): Add instructions to access special registers by
4167 name. Add mtcr and mftbu.
4169 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4171 * mips-opc.c (P3): Define.
4172 (mips_opcodes): Add mad and madu.
4174 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4176 * configure.in: Add W65 support.
4177 * disassemble.c: Likewise.
4178 * w65-opc.h, w65-dis.c: New files.
4180 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4182 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4185 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4187 * mips-opc.c: Add dli as a synonym for li.
4189 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4191 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4192 print something for reserved opcode values, even if it won't
4195 * mips-dis.c (_print_insn_mips): When initializing, shift right
4196 and mask, to avoid sign extension problems on the Alpha.
4198 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4201 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4203 * sh-opc.h (mov.l gbr): Get direction right.
4204 * sh-dis.c (print_insn_shx): New function.
4205 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4206 print opcodes with right byte order.
4208 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4210 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4211 to avoid conflicts with getopt.
4213 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4215 * hppa-dis.c (print_insn_hppa): Read the instruction using
4216 bfd_getb32, so that it works on a little endian or 64 bit host.
4217 Remove unused local variable op.
4219 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4221 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4222 addu does not work correctly if -mips3.
4224 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4226 * a29k-dis.c (print_special): Add special register names defined
4227 on 29030, 29040 and 29050.
4228 (print_insn): Handle new operand type 'I'.
4230 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4232 * Makefile.in (INSTALL): Use top level install.sh script.
4234 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4236 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4237 that it works on a little endian host.
4239 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4241 * configure.in: Use ${config_shell} when running config.bfd.
4243 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4245 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4247 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4249 * a29k-dis.c (print_insn): Print the opcode.
4251 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4253 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4255 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4257 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4259 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4261 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4262 which store a value into memory.
4264 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4266 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4267 * arm-dis.c, arm-opc.h: New files.
4269 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4271 * Makefile.in (ns32k-dis.o): Add dependency.
4272 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4273 string, not as array of chars.
4275 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4277 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4279 * sparc-opc.c: Added sparclite extended FP operations, and
4280 versions of v9 impdep* instructions permitting specification of
4283 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4285 * i960-dis.c (reg_names): Now const.
4286 (struct sparse_tabent): New type, copied from array type in mem
4288 (ctrl): Local static array ctrl_tab now const.
4289 (cobr): Local static array cobr_tab now const.
4290 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4291 static variable mem_tab no longer explicitly initialized. Changed
4292 mem_init to const array of struct sparse_tabent.
4293 (reg): Local static variable reg_tab no longer explicitly
4294 initialized. Changed reg_init to const array of struct
4296 (ea): Local static array scale_tab now const.
4298 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4301 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4303 * configure.bat: the disassember needs to be enabled for
4304 "objdump -d" to work in djgpp.
4306 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4308 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4309 (invalid_float): Enabled general version, doesn't require running
4310 on ns32k host. Changed to take char* argument, and test for
4311 explicitly specified sizes, instead of using sizeof() on host CPU
4313 (INVALID_FLOAT): Cast first argument.
4314 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4315 list_P032, list_M032): Now const.
4316 (optlist, list_search): Made appropriate arguments now point to
4318 (print_insn_arg): Changed static array of one-character-string
4319 pointers into a static const array of characters; fixed sprintf
4320 statement accordingly.
4322 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4324 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4325 from distribution. A ns32k-dis.c from a previous distribution has
4326 been brought up to date and supports the new interface.
4328 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4330 * configure.in: add bfd_ns32k_arch target support.
4332 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4333 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4335 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4337 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4340 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4342 * h8300-dis.c, mips-dis.c: Don't use true and false.
4344 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4346 * configure.in: Change --with-targets to --enable-targets.
4348 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4350 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4351 opcodes to the first instruction with that opcode, to speed
4352 disassembly of large files. From ralphc@pyramid.com (Ralph
4355 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4357 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4359 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4361 * configure.bat: update to latest makefile.in
4363 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4365 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4366 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4367 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4368 slot insn is in a delay slot.
4369 * z8k-opc.h: (resflg): Fix patterns.
4370 * h8500-opc.h Fix CR insn patterns.
4372 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4374 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4375 "cmpl" before POWER versions, so that gas -many uses them.
4377 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4379 * disassemble.c: New file.
4380 * Makefile.in (OFILES): Add disassemble.o.
4381 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4382 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4383 binutils/configure.in.
4385 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4386 opcode being examined.
4388 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4390 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4391 (insert_ral, insert_ram, insert_ras): New functions.
4392 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4393 RAS for store with update.
4395 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4397 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4398 (edelsohn@npac.syr.edu).
4400 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4402 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4405 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4407 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4409 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4411 * ppc-opc.c (powerpc_operands): The signedp field has been
4412 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4413 instead. Add new operand SISIGNOPT.
4414 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4415 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4416 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4419 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4421 * i386-dis.c (struct private): Renamed to dis_private. `private'
4422 is a reserved word for dynix cc.
4424 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4426 * configure.in: Change error message to refer to bfd/config.bfd
4427 rather than bfd/configure.in.
4429 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4431 * ppc-opc.c: Define POWER2 as short alias flag.
4432 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4435 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4437 * i960-dis.c (print_insn_i960): Don't read a second word for
4438 opcodes 0, 1, 2 and 3.
4440 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4442 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4444 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4446 * m68881-ext.c: Removed; no longer used.
4447 * Makefile.in: Changed accordingly.
4449 * m68k-dis.c (ext_format_68881): Don't declare.
4450 (print_insn_m68k): If an instruction uses place 'i', it uses at
4451 least four fixed bytes.
4452 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4453 extended float, convert to double using floatformat_to_double, not
4454 ieee_extended_to_double, and fetch the data before converting it.
4456 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4458 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4459 davidj@ICSI.Berkeley.EDU (David Johnson).
4461 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4463 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4464 PowerPC uses bdnz[l][a].
4466 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4468 * dis-buf.c, i386-dis.c: Include sysdep.h.
4470 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4472 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4474 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4475 by Motorola PowerPC 601 with PPC_OPCODE_601.
4476 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4477 Disassemble Motorola PowerPC 601 instructions as well as normal
4478 PowerPC instructions.
4480 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4482 * i960-dis.c (reg, mem): Just use a static array instead of
4485 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4487 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4488 condition name index if this is for a negated condition.
4490 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4491 Floating point format for 'H' operand is backwards from normal
4492 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4493 operands (fmpyadd and fmpysub), handle bizarre register
4494 translation correctly for single precision format.
4496 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4497 or 'I' operands if the next format specifier is 'M' (fcmp
4498 condition completer).
4500 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4502 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4503 single number giving a bitmask for the MB and ME fields of an M
4504 form instruction. Change NB to accept 32, and turn it into 0;
4505 also turn 0 into 32 when disassembling. Seperated SH from NB.
4506 (insert_mbe, extract_mbe): New functions.
4507 (insert_nb, extract_nb): New functions.
4508 (SC_MASK): Mask out SA and LK bits.
4509 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4510 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4511 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4512 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4513 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4514 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4515 (powerpc_macros): Define table of macro definitions.
4516 (powerpc_num_macros): Define.
4518 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4519 if PPC_OPERAND_NEXT is set.
4521 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4523 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4524 char. Retrieve contents using bfd_getl32 instead of shifting.
4526 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4528 * ppc-opc.c: New file. Opcode table for PowerPC, including
4529 opcodes for POWER (RS/6000).
4530 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4531 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4532 (CFILES): Add ppc-dis.c.
4533 (ppc-dis.o, ppc-opc.o): New targets.
4534 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4536 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4538 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4539 No space before 'u', 'f', or 'N'.
4541 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4543 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4544 farther than we should.
4546 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4548 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4550 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4552 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4554 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4555 needs it, to prevent reading past the end of a section.
4557 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4559 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4560 Removed t,A case for la; always use t,A(b) case.
4562 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4564 From Ted Lemen <mellon@pepper.ncd.com>
4565 * mips-dis.c (print_insn_arg): Handle 'k'.
4566 * mips-opc.c: Make cache use k, not t.
4568 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4570 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4571 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4572 FLOAT_FORMAT_CODE to put out floating point register names.
4574 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4576 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4578 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4580 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4582 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4584 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4585 larger than 32. Moved dsxx32 variants first for disassembler.
4587 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4589 * z8kgen.c, z8k-opc.h: Add full lda information.
4591 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4593 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4594 movb instructions. Any necessary space will be emitted by
4595 the code to handle nullification completers.
4597 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4599 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4601 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4603 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4604 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4606 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4608 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4610 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4612 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4613 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4615 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4617 * m88k-dis.c (m88kdis): comment change. Remove space after
4619 (printop): handle new arg types DEC and XREG for m88110.
4621 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4623 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4624 type for absolute branch addresses. Delete special
4625 "ble" and "be" code in 'W' operand code.
4627 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4629 * mips-opc.c: Set hazard information correctly for branch
4630 likely instructions.
4632 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4634 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4635 info->fprintf_func for printing and info->print_address_func for
4638 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4640 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4642 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4644 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4645 Corrected second case of "b" for disassembler.
4647 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4649 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4650 to BFD swapping routines to correspond to BFD name changes.
4652 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4654 * mips-opc.c: Change div machine instruction to be z,s,t rather
4655 than s,t. Change div macro to be d,v,t rather than d,s,t.
4656 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4657 rem and remu which generates only the corresponding div
4658 instruction. This is for compatibility with the MIPS assembler,
4659 which only generates the simple machine instruction when an
4660 explicit destination of $0 is used.
4661 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4663 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4665 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4666 WR_31 hazard for bal, bgezal, bltzal.
4668 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4670 * hppa-dis.c (print_insn_hppa): Use print function
4671 from within the disassemble_info, not fprintf_filtered.
4673 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4675 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4676 Law, law@cs.utah.edu.)
4678 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4680 * mips-opc.c ("absu"): Removed.
4683 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4685 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4686 Changed hazard information to distinguish between memory load
4687 delays and coprocessor load delays.
4689 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4691 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4693 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4695 * configure.in: Don't pass cpu to config.bfd.
4697 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4699 * m88k-dis.c (m88kdis): Make class unsigned.
4701 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4703 * alpha-dis.c (print_insn_alpha): One branch format case was
4704 missing the instruction name.
4706 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4708 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4709 Add the arch-specific auxiliary files.
4710 (OFILES): Remove the arch-specific auxiliary files
4711 and use BFD_MACHINES instead of DIS_LIBS.
4712 * configure.in: Set BFD_MACHINES based on --with-targets option.
4714 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4716 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4719 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4721 * sparc-opc.c: Change CONST to const to deal with gcc
4722 -Dconst=__const -traditional.
4724 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4726 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4727 coprocessor instructions out of #if 0, and made them use new
4730 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4732 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4734 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4736 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4737 instruction, for use by the disassembler.
4739 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4740 hand-coded sign extensions that depended on 32-bit host ints.
4741 FIXME, we still depend on big-endian host bitfield ordering.
4742 (sparc_print_insn): Set the insn_info_valid field, and the
4743 other fields that describe the instruction being printed.
4745 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4747 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4748 `jmp' instead of just one of them.
4750 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4752 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4753 (fput_fp_reg_r): Renamed from fput_reg_r.
4754 (fput_fp_reg): New function.
4755 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4757 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4759 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4761 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4763 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4765 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4766 don't output a space.
4768 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4770 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4772 * mips-opc.c: New file, containing opcode table from
4773 ../include/opcode/mips.h.
4774 * Makefile.in: Add it.
4776 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4778 * m88k-dis.c: New file, moved in from gdb and changed to use the
4779 new dis-asm.h disassembler interface.
4780 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4781 (m88k-dis.o): New target.
4783 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4785 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4786 argument string const char * to correspond to opcode/mips.h.
4788 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4790 * mips-dis.c: Updated to account for name changes in new version
4792 * Makefile.in: Added header file dependencies.
4794 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4796 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4798 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4800 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4801 extend, rather than shifts.
4803 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4805 * Makefile.in: Undo 15 June change.
4807 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4809 * m68k-dis.c (print_insn_arg): Change return value to byte count
4811 * m68k-dis.c: Re-write to detect invalid operands before
4812 printing anything, so we can handle this the same way we
4813 handle invalid opcodes.
4815 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4817 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4819 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4821 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4824 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4826 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4828 * configure.in: Do make sysdep.h link.
4829 * Makefile.in: Search ../include. Don't search ../bfd.
4831 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4833 Changes from Jeff Law, law@cs.utah.edu:
4834 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4835 Do not print a space before the completers specified by
4838 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4840 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4841 defined, since gdb has been fixed.
4843 Changes from Jeff Law, law@cs.utah.edu:
4844 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4845 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4846 be a *disassemble_info, not a *FILE.
4847 * hppa-dis.c: Support 'd', '!', and 'a'.
4848 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4849 * hppa-dis.c: Delete cases which are no longer needed.
4851 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4853 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4855 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4857 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4860 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4862 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4863 * configure.in: No longer need to configure to get sysdep.h.
4865 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4867 * Patches from Jeffrey Law <law@cs.utah.edu>.
4868 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4869 templates for 1.1 FP computational instructions.
4871 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4873 * h8500-dis.c (print_insn_h8500): Address argument is type
4875 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4878 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4879 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4881 * sparc-dis.c (compare_opcodes): Move static declaration to
4884 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4886 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4887 instruction, remove unimp hack from 'l' argument.
4889 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4891 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4894 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4896 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4897 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4900 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4902 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4903 arrays of string pointers to 2-d arrays of chars, to save
4906 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4908 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4909 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4911 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4913 * hppa-dis.c: New file from Utah, adapted to new disassembler
4915 * Makefile.in: Include it.
4917 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4919 * sh-dis.c, sh-opc.h: New files.
4921 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4923 * alpha-dis.c, alpha-opc.h: New files.
4925 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4927 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4930 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4932 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4934 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4936 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4939 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4941 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4942 and double percent signs a few places.
4944 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4946 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4947 Use info->print_address_func not print_address.
4949 * dis-buf.c (generic_print_address): New function.
4951 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4953 * Makefile.in: Add sparc-dis.c.
4954 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4956 Add `add' instruction to the set that get checked
4957 for a preceding `sethi' in order to print an absolute address.
4958 * (print_insn): Disassembly prefers real instructions.
4959 (is_delayed_branch): Speed up.
4960 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4961 Still missing some float ops, and needs testing.
4962 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4963 F_ALIAS. Use printf, not fprintf, when not passing a file
4965 (compare_opcodes): Check that identical instructions have
4966 identical opcodes, complain otherwise.
4969 * Include reg_names.
4971 Use dis-asm.h/read_memory_func interface.
4973 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4975 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4976 deliberately return non-zero to setjmp from longjmp. Otherwise
4977 this code fails to compile.
4979 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4981 * m68k-dis.c: Fix prototype for fetch_arg().
4983 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4985 * dis-buf.c: New file, for new read_memory_func interface.
4986 Makefile.in (OFILES): Include it.
4987 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4988 Use new read_memory_func interface.
4990 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4992 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4993 * h8500-opc.h: Fix couple of opcodes.
4995 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4997 * Makefile.in: add dvi & installcheck targets
4999 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5001 * Makefile.in: Update for h8500-dis.c.
5003 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5005 * h8500-dis.c, h8500-opc.h: New files
5007 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5009 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5010 ../include/dis-asm.h.
5011 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5012 and ../gdb/m68k-pinsn.c).
5013 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5014 and ../gdb/i386-pinsn.c).
5015 * m68881-ext.c: New file. Moved definition of
5016 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5017 * Makefile.in: Adjust for new files.
5018 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5019 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5020 can be dis-assembled.
5022 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5024 * mips-dis.c (print_insn_arg): Now returns void.
5026 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5028 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5029 files that use the macros.
5031 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5033 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5034 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5035 (CFILES): Added mips-dis.c.
5037 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5039 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5040 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5042 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5044 * Makefile.in: Improve *clean rules.
5045 * configure.in: Allow a default host.
5047 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5049 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5050 files include other sysdep files
5052 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5054 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5056 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5058 * configure.in: For host support, use ../bfd/configure.host
5059 so it stays in sync with the ../bfd/hosts database.
5061 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5063 * configure.in: use cpu-vendor-os triple instead of nested cases
5065 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5067 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5068 *always* the wrong one.
5070 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5072 * z8kgen.c: added copyright info
5074 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5076 * z8k-dis.c (unparse_instr): prettier tabs
5077 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5079 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5081 * configure.in: Add ncr* configuration.
5082 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5083 picayune ANSI compilers happy.
5085 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5087 * configure.in (i386): Make i386 and i486 synonymous for now.
5088 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5090 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5092 * Makefile.in (install): Fix typo.
5094 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5096 * Makefile.in (make): Remove obsolete crud.
5097 (sparc-opc.o): Avoid Sun Make VPATH bug.
5099 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5101 * Makefile.in: since there are no SUBDIRS, remove rule and
5102 references of subdir_do.
5104 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5106 * Makefile.in (install): Get the library name right here too.
5107 Don't install bfd.h, since it's unrelated to this library. No
5108 subdirs to recurse into, either.
5109 (CFILES): The source file has a .c suffix, not .o.
5111 * sparc-opc.c: New file, moved from BFD.
5112 * Makefile.in (OFILES): Build it.
5114 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5116 * z8k-dis.c: fixed forward refferences of some declarations.
5118 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5120 * Makefile.in: get the name of the library right
5122 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5124 * z8k-dis.c: knows how to disassemble z8k stuff
5125 * z8k-opc.h: new file full of z8000 opcodes
5129 version-control: never