1 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3 * Makefile.in (Makefile): Just rebuild Makefile when running
5 (config.h, stamp-h): New targets.
6 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
7 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
11 * mips-opc.c: Change unaligned loads and stores with "t,A"
12 operands to use "t,A(b)".
15 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
17 * sh-dis.c (print_insn_shx): Add F_FR0 support.
20 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
22 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
23 until 3 instead of until 2.
25 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
27 * Makefile.in (ALL_CFLAGS): Define.
28 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
29 (MOSTLYCLEAN): Add config.log.
30 (distclean): Don't remove config.log.
31 * configure.in: Substitute HDEFINES.
35 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
37 * sh-opc.h (sh_arg_type): Add F_FR0.
38 (sh_table, case fmac): Add F_FR0 as first argument.
41 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
43 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
45 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
47 * sparc-dis.c: Remove all references to NO_V9.
49 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
51 * aclocal.m4: Just include ../bfd/aclocal.m4.
54 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
56 * sparc-dis.c (X_DISP19): Define.
57 (print_insn, case 'G'): Use it.
58 (print_insn, case 'L'): Sign extend displacement.
60 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
62 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
63 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
64 host_makefile_frag or frags.
65 * aclocal.m4: New file.
67 * Makefile.in (INSTALL): Set to @INSTALL@.
68 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
69 (INSTALL_DATA): Set to @INSTALL_DATA@.
71 (AR_FLAGS): Set to rc rather than qc.
73 (CFLAGS): Set to @CFLAGS@.
74 (@host_makefile_frag@): Remove.
75 (config.status): Remove dependency upon @frags@.
77 * configure.in: ../bfd/config.bfd now just sets shell variables.
78 Use them rather than looking through target Makefile fragments.
82 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
84 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
87 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
89 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
90 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
93 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
94 (lookup_{name,value}): New functions.
95 (prefetch_table): New static local.
96 (sparc_{encode,decode}_prefetch): New functions.
97 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
100 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
102 * sh-opc.h: Add blank lines to improve readabililty of sh3e
106 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
108 * sh-dis.c: Correct comment on first line of file.
110 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
112 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
114 * sparc-opc.c (asi, membar): New static locals.
115 (sparc_{encode,decode}_{asi,membar}): New functions.
116 (sparc_opcodes, membar insn): Fix.
117 * sparc-dis.c (print_insn): Call sparc_decode_asi.
118 Support decoding of membar masks.
121 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
123 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
125 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
127 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
128 and likewise for the other branches. Add bhs as an alias for bcc,
129 and likewise for the size variants. Add dbhs as an alias for
133 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
135 * sh-opc.h (FP sts instructions): Update to match reality.
138 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
140 * m68k-dis.c: (fpcr_names): Add % before all register names.
141 (reg_names): Likewise.
142 (print_insn_arg): Don't explicitly print % before register names.
143 Add % before register names in static array names. In case 'r',
144 print data registers as `@(Dn)', not `Dn@'. When printing a
145 memory address, don't print @# before it.
146 (print_indexed): Change base_disp and outer_disp from int to
147 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
148 syntax. Sign extend 8 byte displacement correctly.
149 (print_base): Print using MIT syntax. Print zpc when appropriate.
150 Change parameter disp from int to bfd_vma.
152 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
156 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
158 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
159 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
160 * sh-opc.h (sh_arg_type): Add new operand types.
161 (sh_table): Add new opcodes from SH3E Floating Point ISA.
164 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
166 * Makefile.in (distclean): Remove generated file config.h.
168 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
170 * Makefile.in (distclean): Remove generated file config.h.
172 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
174 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
176 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
178 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
179 rather than numopcodes. Use m68k_opcodes rather than removed
180 opcode function. Don't check F_ALIAS.
181 (print_insn_arg): Change first parameter to be const char *.
182 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
183 (m68k-opc.o): New target.
184 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
185 * configure: Rebuild.
187 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
189 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
190 (opcode_bits, opcode_hash_table): New variables.
191 (opcodes_initialized): Renamed from opcodes_sorted.
192 (build_hash_table): New function.
193 (is_delayed_branch): Use hash table.
194 (print_insn): Renamed from print_insn_sparc, made static.
195 Build and use hash table. If !sparc64, ignore sparc64 insns,
196 and vice-versa if sparc64.
197 (print_insn_sparc, print_insn_sparc64): New functions.
198 (compare_opcodes): Move sparc64 opcodes to end.
199 Print commutative insns with constant second.
200 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
202 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
204 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
205 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
206 avoids printing a delay slot in a delay slot.
207 * sh-opc.h (sh_table): Fully bracket last entry.
209 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
211 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
213 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
215 * configure.in: Get host_makefile_frag from ${srcdir}.
217 * configure.in: Autoconfiscated. Check for string[s].h. Create
218 config.h from config.in. Don't set up sysdep.h link.
219 * sysdep.h: New file.
220 * configure, config.in: New files, generated from configure.in.
221 * Makefile.in: Updated to be processed autoconf-style.
222 (distclean): Keep sysdep.h. Remove config.log and config.cache.
223 (Makefile): Depend on config.status.
224 (config.status): New rule.
225 * configure.bat: Update Makefile substitutions.
227 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
229 * mips-opc.c (L1): Define.
230 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
231 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
234 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
236 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
237 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
238 have multiple add units but only a single logical unit.
240 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
241 shifted by 18, without any insertion or extraction function.
242 (insert_cr, extract_cr): Remove.
245 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
247 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
250 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
252 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
255 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
257 * mpw-config.in: Add sh and i386 configs, remove sparc config.
258 * sh-opc.h: Add copyright.
260 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
262 * Makefile.in (crunch-m68k): Delete extra target accidentally
263 checked in a while ago.
265 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
267 * sh-opc.h (sh_table): Add SH3 support.
269 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
271 * sh-opc.h: Added bsrf and braf.
273 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
275 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
276 bogus [ls]fm{ea,fd} patterns.
278 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
279 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
280 initialize it from memory. Make function static.
281 (print_insn_{big,little}_arm): New functions.
282 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
283 the correct endianness.
286 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
288 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
289 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
292 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
294 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
297 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
299 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
300 17th, so that it builds again using GCC as the compiler.
302 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
304 * mips-dis.c (print_insn_little_mips): Cast return value from
305 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
306 expects an unsigned long, and that might be fewer words of
307 argument storage (e.g., if bfd_vma is long long on a 32-bit
309 (print_insn_big_mips): Likewise with bfd_getb32 value.
310 (_print_insn_mips): Now static.
312 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
314 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
315 gcc memory hog problem with initializer is fixed.
318 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
320 * arc-opc.c (NULL): Define.
321 (arc_operands, insn fields u,s): Delete.
322 (arc_operands, insn fields a,b,c): Mark as signed.
323 (arc_opcodes): No longer const, links computed at run-time.
324 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
325 suffixes that affect the insn code.
326 (arc_opcodes): Resort table to macros are first.
327 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
328 (arc_opcodes, st [b] entry): Likewise.
329 (arc_opcodes, st [b,d] entry): Fix mask, value.
330 (arc_reg_names): Add entries for r29, r30, r31, r60.
331 (opcode_map, icode_map): New static globals.
332 (arc_opcode_init_tables): Initialize them.
333 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
334 (insert_shimmoffset): Signal error if register present.
336 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
339 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
341 Merge in support for Mac MPW as a host.
342 (Old change descriptions retained for informational value.)
344 * mpw-config.in (archname): Compute from the config.
345 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
347 * mpw-config.in (target_arch): Compute from canonical target.
348 (m68k, mips, powerpc, sparc): Add architectures.
349 * mpw-make.in (disassemble.c.o): Add.
350 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
352 * mpw-config.in (BFD_MACHINES): Set to a default value.
353 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
355 * mpw-make.in (CSEARCH): Add extra-include to search path.
357 * mpw-config.in (varargs.h): Don't create.
358 (sysdep.h): Create using forward-include.
359 * mpw-make.in (CSEARCH): Add include/mpw to search path.
361 * mpw-config.in: New file, MPW version of configure.in.
362 * mpw-make.in: New file, MPW version of Makefile.in.
365 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
367 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
368 Call arc_get_opcode_mach to map bfd mach number to opcode value.
369 (print_insn_*): Pass bfd mach number, not opcode version.
370 * arc-opc.c (arc_get_opcode_mach): New function.
373 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
375 * alpha-dis.c (print_insn_alpha): Put empty statement after
378 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
380 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
381 (low_sign_extend): Likewise.
382 (get_field): Delete unused function.
383 (set_field, deposit_14, deposit_21): Likewise.
385 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
387 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
390 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
392 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
394 * alpha-opc.h (OSF_ASMCODE): define
395 print pal-code names as defined in App C of the
396 Alpha Architecture Reference Manual
398 * alpha-dis.c: cleaned up output
399 print stylized code forms as defined in App A.4.3 of the
400 Alpha Architecture Reference Manual
402 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
404 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
406 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
409 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
411 * m68k-dis.c (opcode): New function. Returns address of opcode
412 table entry given index, even if the opcode table was split to
413 work around gcc bugs.
414 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
416 (BREAK_UP_BIG_DECL): Make secondary array static and const.
417 (reg_names): Now const.
418 (print_insn_arg): Arrays cacheFieldName and names now const.
419 (print_indexed): Array scales now const.
422 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
424 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
425 (print_insn_arc_{host,graphics,audio}): Likewise.
426 (print_insn): Add prototype.
427 (arc_get_disassembler): New arg `big_p'. Return little or big
428 print fn accordingly.
429 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
430 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
431 (arc_opval_supported): Likewise.
432 * disassemble.c (disassembler): Pass big endian flag to
433 arc_get_disassembler.
436 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
438 * ppc-opc.c: Sort recently added instructions by minor opcode
439 number within major opcode number.
441 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
443 * hppa-dis.c: Include libhppa.h.
445 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
447 * mips-opc.c: Change dli to use M_DLI, and add dla.
449 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
451 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
454 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
456 * arc-dis.c (arc_get_disassembler): Change argument to int,
457 one of bfd_mach_arc_xxx. All callers updated.
460 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
462 * mips-opc.c: Add r4650 mul instruction.
464 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
466 * mips-opc.c: Add uld and usd macros for unaligned double load and
469 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
471 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
472 mfdcr, mtdcr, icbt, iccci.
475 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
477 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
478 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
479 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
480 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
481 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
482 (insert_absaddr): New function.
484 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
486 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
487 New argument `cpu', pass it to arc_opcode_init_tables.
488 Document byte order dependencies. Ignore unsupported insns.
489 (arc_get_disassembler): New function.
490 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
491 print_insn_arc_audio): New functions.
492 * arc-opc.c (MULTSHIFT operand): Delete.
493 (UNSIGNED, SATURATION): New operands.
494 (mac, mul, mul64, mulu64): New insns.
495 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
496 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
497 (host,graphics,audio extended and auxiliary regs): Define.
498 (ss, sc, mh, ml): New suffixes.
499 (arc_opcode_supported, arc_opval_supported): New functions.
500 (insert_multshift, extract_multshift): Deleted.
501 * disassemble.c (disassembler, case bfd_arch_arc): Call
502 arc_get_disassembler to get disassembler routine.
505 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
507 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
508 signed char fields to shorts, more portable.
510 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
512 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
513 char fields as signed chars, since they may have negative values.
515 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
517 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
518 (mycroft@netbsd.org).
520 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
522 From "Logg, Ed" <elogg@ea.com>:
523 * ppc-opc.c (extract_bdm): Correct parenthezisation.
524 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
527 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
529 * ppc-opc.c: Changes based on patch from David Edelsohn
530 <edelsohn@mhpcc.edu>.
531 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
534 (insert_tbr): New static function.
535 (extract_tbr): New static function.
536 (XFXFXM_MASK, XFXM): Define.
537 (XSPRBAT_MASK, XSPRG_MASK): Define.
538 (powerpc_opcodes): Add instructions to access special registers by
539 name. Add mtcr and mftbu.
541 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
543 * mips-opc.c (P3): Define.
544 (mips_opcodes): Add mad and madu.
546 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
548 * configure.in: Add W65 support.
549 * disassemble.c: Likewise.
550 * w65-opc.h, w65-dis.c: New files.
552 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
554 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
558 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
560 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
562 * arc-opc.c (extract_reladdr): New function.
563 (insert_reladdr): Store address right-shifted by 2.
566 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
568 * mips-opc.c: Add dli as a synonym for li.
571 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
573 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
575 (extraction fns): Insn argument now array of two words. Return pointer
576 to value's table entry. All uses changed.
577 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
578 (insert_multshift, extract_multshift): New fns.
579 (arc_operands): Add support for cache bypass suffix. Add support for
580 predefined aux regs. Modifier bits moved to flags field.
581 (arc_opcodes): Likewise.
582 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
583 New insn rlc. Update to syntax in programmer's manual.
584 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
585 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
587 (arc_opcode_init_tables): New argument to indicate cpu type.
588 (insert_reg): Handle predefined aux regs.
589 (extract_reg): Likewise.
590 (lookup_register): New fn.
591 * arc-dis.c (arc_condition_codes): Deleted.
592 (print_insn_arc): Handle insns with 32 bit immediate constants better.
593 Clean up modifier handling. Handle predefined aux regs.
596 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
598 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
599 print something for reserved opcode values, even if it won't
602 * mips-dis.c (_print_insn_mips): When initializing, shift right
603 and mask, to avoid sign extension problems on the Alpha.
605 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
609 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
611 * configure.in: Add ARC support.
612 * disassemble.c: Likewise.
613 * arc-dis.c, arc-opc.c: New files.
616 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
618 * sh-opc.h (mov.l gbr): Get direction right.
619 * sh-dis.c (print_insn_shx): New function.
620 (print_insn_shl, print_insn_sh): Call print_insn_shx to
621 print opcodes with right byte order.
623 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
625 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
626 to avoid conflicts with getopt.
628 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
630 * hppa-dis.c (print_insn_hppa): Read the instruction using
631 bfd_getb32, so that it works on a little endian or 64 bit host.
632 Remove unused local variable op.
634 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
636 * mips-opc.c: Use or instead of addu for pseudo-op move, since
637 addu does not work correctly if -mips3.
639 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
641 * a29k-dis.c (print_special): Add special register names defined
642 on 29030, 29040 and 29050.
643 (print_insn): Handle new operand type 'I'.
645 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
647 * Makefile.in (INSTALL): Use top level install.sh script.
649 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
651 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
652 that it works on a little endian host.
654 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
656 * configure.in: Use ${config_shell} when running config.bfd.
658 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
660 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
662 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
664 * a29k-dis.c (print_insn): Print the opcode.
666 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
668 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
670 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
672 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
674 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
676 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
677 which store a value into memory.
679 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
681 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
682 * arm-dis.c, arm-opc.h: New files.
684 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
686 * Makefile.in (ns32k-dis.o): Add dependency.
687 * ns32k-dis.c (print_insn_arg): Declare initialized local as
688 string, not as array of chars.
690 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
692 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
694 * sparc-opc.c: Added sparclite extended FP operations, and
695 versions of v9 impdep* instructions permitting specification of
698 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
700 * i960-dis.c (reg_names): Now const.
701 (struct sparse_tabent): New type, copied from array type in mem
703 (ctrl): Local static array ctrl_tab now const.
704 (cobr): Local static array cobr_tab now const.
705 (mem): Local variables reg1, reg2, reg3 now point to const. Local
706 static variable mem_tab no longer explicitly initialized. Changed
707 mem_init to const array of struct sparse_tabent.
708 (reg): Local static variable reg_tab no longer explicitly
709 initialized. Changed reg_init to const array of struct
711 (ea): Local static array scale_tab now const.
713 start-sanitize-i960xl
714 * i960-dis.c (reg): Added i960XL instructions to reg_init table.
718 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
720 * configure.bat: the disassember needs to be enabled for
721 "objdump -d" to work in djgpp.
723 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
725 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
726 (invalid_float): Enabled general version, doesn't require running
727 on ns32k host. Changed to take char* argument, and test for
728 explicitly specified sizes, instead of using sizeof() on host CPU
730 (INVALID_FLOAT): Cast first argument.
731 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
732 list_P032, list_M032): Now const.
733 (optlist, list_search): Made appropriate arguments now point to
735 (print_insn_arg): Changed static array of one-character-string
736 pointers into a static const array of characters; fixed sprintf
737 statement accordingly.
739 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
741 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
742 from distribution. A ns32k-dis.c from a previous distribution has
743 been brought up to date and supports the new interface.
745 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
747 * configure.in: add bfd_ns32k_arch target support.
749 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
750 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
752 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
754 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
757 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
759 * h8300-dis.c, mips-dis.c: Don't use true and false.
761 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
763 * configure.in: Change --with-targets to --enable-targets.
765 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
767 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
768 opcodes to the first instruction with that opcode, to speed
769 disassembly of large files. From ralphc@pyramid.com (Ralph
772 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
774 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
776 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
778 * configure.bat: update to latest makefile.in
780 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
782 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
783 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
784 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
785 slot insn is in a delay slot.
786 * z8k-opc.h: (resflg): Fix patterns.
787 * h8500-opc.h Fix CR insn patterns.
789 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
791 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
792 "cmpl" before POWER versions, so that gas -many uses them.
794 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
796 * disassemble.c: New file.
797 * Makefile.in (OFILES): Add disassemble.o.
798 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
799 * configure.in: Define ARCHDEFS in Makefile. Code taken from
800 binutils/configure.in.
802 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
803 opcode being examined.
805 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
807 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
808 (insert_ral, insert_ram, insert_ras): New functions.
809 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
810 RAS for store with update.
812 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
814 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
815 (edelsohn@npac.syr.edu).
817 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
819 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
822 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
824 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
826 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
828 * ppc-opc.c (powerpc_operands): The signedp field has been
829 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
830 instead. Add new operand SISIGNOPT.
831 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
832 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
833 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
836 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
838 * i386-dis.c (struct private): Renamed to dis_private. `private'
839 is a reserved word for dynix cc.
841 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
843 * configure.in: Change error message to refer to bfd/config.bfd
844 rather than bfd/configure.in.
846 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
848 * ppc-opc.c: Define POWER2 as short alias flag.
849 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
852 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
854 * i960-dis.c (print_insn_i960): Don't read a second word for
855 opcodes 0, 1, 2 and 3.
857 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
859 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
861 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
863 * m68881-ext.c: Removed; no longer used.
864 * Makefile.in: Changed accordingly.
866 * m68k-dis.c (ext_format_68881): Don't declare.
867 (print_insn_m68k): If an instruction uses place 'i', it uses at
868 least four fixed bytes.
869 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
870 extended float, convert to double using floatformat_to_double, not
871 ieee_extended_to_double, and fetch the data before converting it.
873 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
875 * mips-opc.c: It's sqrt.s, not sqrt.w. From
876 davidj@ICSI.Berkeley.EDU (David Johnson).
878 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
880 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
881 PowerPC uses bdnz[l][a].
883 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
885 * dis-buf.c, i386-dis.c: Include sysdep.h.
887 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
889 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
891 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
892 by Motorola PowerPC 601 with PPC_OPCODE_601.
893 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
894 Disassemble Motorola PowerPC 601 instructions as well as normal
895 PowerPC instructions.
897 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
899 * i960-dis.c (reg, mem): Just use a static array instead of
902 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
904 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
905 condition name index if this is for a negated condition.
907 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
908 Floating point format for 'H' operand is backwards from normal
909 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
910 operands (fmpyadd and fmpysub), handle bizarre register
911 translation correctly for single precision format.
913 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
914 or 'I' operands if the next format specifier is 'M' (fcmp
915 condition completer).
917 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
919 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
920 single number giving a bitmask for the MB and ME fields of an M
921 form instruction. Change NB to accept 32, and turn it into 0;
922 also turn 0 into 32 when disassembling. Seperated SH from NB.
923 (insert_mbe, extract_mbe): New functions.
924 (insert_nb, extract_nb): New functions.
925 (SC_MASK): Mask out SA and LK bits.
926 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
927 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
928 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
929 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
930 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
931 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
932 (powerpc_macros): Define table of macro definitions.
933 (powerpc_num_macros): Define.
935 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
936 if PPC_OPERAND_NEXT is set.
938 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
940 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
941 char. Retrieve contents using bfd_getl32 instead of shifting.
943 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
945 * ppc-opc.c: New file. Opcode table for PowerPC, including
946 opcodes for POWER (RS/6000).
947 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
948 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
949 (CFILES): Add ppc-dis.c.
950 (ppc-dis.o, ppc-opc.o): New targets.
951 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
953 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
955 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
956 No space before 'u', 'f', or 'N'.
958 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
960 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
961 farther than we should.
963 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
965 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
967 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
969 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
971 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
972 needs it, to prevent reading past the end of a section.
974 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
976 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
977 Removed t,A case for la; always use t,A(b) case.
979 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
981 From Ted Lemen <mellon@pepper.ncd.com>
982 * mips-dis.c (print_insn_arg): Handle 'k'.
983 * mips-opc.c: Make cache use k, not t.
985 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
987 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
988 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
989 FLOAT_FORMAT_CODE to put out floating point register names.
991 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
993 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
995 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
997 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
999 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1001 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1002 larger than 32. Moved dsxx32 variants first for disassembler.
1004 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1006 * z8kgen.c, z8k-opc.h: Add full lda information.
1008 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1010 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1011 movb instructions. Any necessary space will be emitted by
1012 the code to handle nullification completers.
1014 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1016 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1018 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1020 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1021 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1023 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1025 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1027 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1029 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1030 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1032 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1034 * m88k-dis.c (m88kdis): comment change. Remove space after
1036 (printop): handle new arg types DEC and XREG for m88110.
1038 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1040 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1041 type for absolute branch addresses. Delete special
1042 "ble" and "be" code in 'W' operand code.
1044 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1046 * mips-opc.c: Set hazard information correctly for branch
1047 likely instructions.
1049 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1051 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1052 info->fprintf_func for printing and info->print_address_func for
1055 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1057 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1059 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1061 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1062 Corrected second case of "b" for disassembler.
1064 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1066 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1067 to BFD swapping routines to correspond to BFD name changes.
1069 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1071 * mips-opc.c: Change div machine instruction to be z,s,t rather
1072 than s,t. Change div macro to be d,v,t rather than d,s,t.
1073 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1074 rem and remu which generates only the corresponding div
1075 instruction. This is for compatibility with the MIPS assembler,
1076 which only generates the simple machine instruction when an
1077 explicit destination of $0 is used.
1078 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1080 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1082 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1083 WR_31 hazard for bal, bgezal, bltzal.
1085 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1087 * hppa-dis.c (print_insn_hppa): Use print function
1088 from within the disassemble_info, not fprintf_filtered.
1090 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1092 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1093 Law, law@cs.utah.edu.)
1095 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1097 * mips-opc.c ("absu"): Removed.
1100 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1102 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1103 Changed hazard information to distinguish between memory load
1104 delays and coprocessor load delays.
1106 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1108 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1110 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1112 * configure.in: Don't pass cpu to config.bfd.
1114 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1116 * m88k-dis.c (m88kdis): Make class unsigned.
1118 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1120 * alpha-dis.c (print_insn_alpha): One branch format case was
1121 missing the instruction name.
1123 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1125 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1126 Add the arch-specific auxiliary files.
1127 (OFILES): Remove the arch-specific auxiliary files
1128 and use BFD_MACHINES instead of DIS_LIBS.
1129 * configure.in: Set BFD_MACHINES based on --with-targets option.
1131 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1133 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1136 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1138 * sparc-opc.c: Change CONST to const to deal with gcc
1139 -Dconst=__const -traditional.
1141 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1143 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1144 coprocessor instructions out of #if 0, and made them use new
1147 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1149 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1151 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1153 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1154 instruction, for use by the disassembler.
1156 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1157 hand-coded sign extensions that depended on 32-bit host ints.
1158 FIXME, we still depend on big-endian host bitfield ordering.
1159 (sparc_print_insn): Set the insn_info_valid field, and the
1160 other fields that describe the instruction being printed.
1162 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1164 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1165 `jmp' instead of just one of them.
1167 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1169 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1170 (fput_fp_reg_r): Renamed from fput_reg_r.
1171 (fput_fp_reg): New function.
1172 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1174 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1176 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1178 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1180 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1182 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1183 don't output a space.
1185 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1187 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1189 * mips-opc.c: New file, containing opcode table from
1190 ../include/opcode/mips.h.
1191 * Makefile.in: Add it.
1193 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1195 * m88k-dis.c: New file, moved in from gdb and changed to use the
1196 new dis-asm.h disassembler interface.
1197 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1198 (m88k-dis.o): New target.
1200 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1202 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1203 argument string const char * to correspond to opcode/mips.h.
1205 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1207 * mips-dis.c: Updated to account for name changes in new version
1209 * Makefile.in: Added header file dependencies.
1211 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1213 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1215 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1217 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1218 extend, rather than shifts.
1220 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1222 * Makefile.in: Undo 15 June change.
1224 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1226 * m68k-dis.c (print_insn_arg): Change return value to byte count
1228 * m68k-dis.c: Re-write to detect invalid operands before
1229 printing anything, so we can handle this the same way we
1230 handle invalid opcodes.
1232 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1234 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1236 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1238 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1241 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1243 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1245 * configure.in: Do make sysdep.h link.
1246 * Makefile.in: Search ../include. Don't search ../bfd.
1248 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1250 Changes from Jeff Law, law@cs.utah.edu:
1251 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1252 Do not print a space before the completers specified by
1255 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1257 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1258 defined, since gdb has been fixed.
1260 Changes from Jeff Law, law@cs.utah.edu:
1261 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1262 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1263 be a *disassemble_info, not a *FILE.
1264 * hppa-dis.c: Support 'd', '!', and 'a'.
1265 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1266 * hppa-dis.c: Delete cases which are no longer needed.
1268 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1270 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1272 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1274 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1277 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1279 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1280 * configure.in: No longer need to configure to get sysdep.h.
1282 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1284 * Patches from Jeffrey Law <law@cs.utah.edu>.
1285 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1286 templates for 1.1 FP computational instructions.
1288 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1290 * h8500-dis.c (print_insn_h8500): Address argument is type
1292 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1295 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1296 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1298 * sparc-dis.c (compare_opcodes): Move static declaration to
1301 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1303 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1304 instruction, remove unimp hack from 'l' argument.
1306 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1308 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1311 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1313 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1314 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1317 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1319 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1320 arrays of string pointers to 2-d arrays of chars, to save
1323 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1325 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1326 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1328 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1330 * hppa-dis.c: New file from Utah, adapted to new disassembler
1332 * Makefile.in: Include it.
1334 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1336 * sh-dis.c, sh-opc.h: New files.
1338 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1340 * alpha-dis.c, alpha-opc.h: New files.
1342 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1344 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1347 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1349 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1351 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1353 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1356 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1358 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1359 and double percent signs a few places.
1361 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1363 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1364 Use info->print_address_func not print_address.
1366 * dis-buf.c (generic_print_address): New function.
1368 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1370 * Makefile.in: Add sparc-dis.c.
1371 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1373 Add `add' instruction to the set that get checked
1374 for a preceding `sethi' in order to print an absolute address.
1375 * (print_insn): Disassembly prefers real instructions.
1376 (is_delayed_branch): Speed up.
1377 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1378 Still missing some float ops, and needs testing.
1379 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1380 F_ALIAS. Use printf, not fprintf, when not passing a file
1382 (compare_opcodes): Check that identical instructions have
1383 identical opcodes, complain otherwise.
1386 * Include reg_names.
1388 Use dis-asm.h/read_memory_func interface.
1390 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1392 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1393 deliberately return non-zero to setjmp from longjmp. Otherwise
1394 this code fails to compile.
1396 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1398 * m68k-dis.c: Fix prototype for fetch_arg().
1400 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1402 * dis-buf.c: New file, for new read_memory_func interface.
1403 Makefile.in (OFILES): Include it.
1404 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1405 Use new read_memory_func interface.
1407 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1409 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1410 * h8500-opc.h: Fix couple of opcodes.
1412 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1414 * Makefile.in: add dvi & installcheck targets
1416 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1418 * Makefile.in: Update for h8500-dis.c.
1420 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1422 * h8500-dis.c, h8500-opc.h: New files
1424 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
1426 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
1427 ../include/dis-asm.h.
1428 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
1429 and ../gdb/m68k-pinsn.c).
1430 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
1431 and ../gdb/i386-pinsn.c).
1432 * m68881-ext.c: New file. Moved definition of
1433 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1434 * Makefile.in: Adjust for new files.
1435 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
1436 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
1437 can be dis-assembled.
1439 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1441 * mips-dis.c (print_insn_arg): Now returns void.
1443 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
1445 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
1446 files that use the macros.
1448 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1450 * mips-dis.c: New file, from gdb/mips-pinsn.c.
1451 * Makefile.in (DIS_LIBS): Added mips-dis.o.
1452 (CFILES): Added mips-dis.c.
1454 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1456 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1457 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1459 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1461 * Makefile.in: Improve *clean rules.
1462 * configure.in: Allow a default host.
1464 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1466 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1467 files include other sysdep files
1469 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1471 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1473 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
1475 * configure.in: For host support, use ../bfd/configure.host
1476 so it stays in sync with the ../bfd/hosts database.
1478 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1480 * configure.in: use cpu-vendor-os triple instead of nested cases
1482 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
1484 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1485 *always* the wrong one.
1487 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1489 * z8kgen.c: added copyright info
1491 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1493 * z8k-dis.c (unparse_instr): prettier tabs
1494 * z8kgen.c -> z8k-opc.h: bug fixes in tables
1496 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
1498 * configure.in: Add ncr* configuration.
1499 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
1500 picayune ANSI compilers happy.
1502 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
1504 * configure.in (i386): Make i386 and i486 synonymous for now.
1505 * configure.in (i[34]86-*-sysv4): Add my_host definition.
1507 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1509 * Makefile.in (install): Fix typo.
1511 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
1513 * Makefile.in (make): Remove obsolete crud.
1514 (sparc-opc.o): Avoid Sun Make VPATH bug.
1516 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
1518 * Makefile.in: since there are no SUBDIRS, remove rule and
1519 references of subdir_do.
1521 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1523 * Makefile.in (install): Get the library name right here too.
1524 Don't install bfd.h, since it's unrelated to this library. No
1525 subdirs to recurse into, either.
1526 (CFILES): The source file has a .c suffix, not .o.
1528 * sparc-opc.c: New file, moved from BFD.
1529 * Makefile.in (OFILES): Build it.
1531 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
1533 * z8k-dis.c: fixed forward refferences of some declarations.
1535 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
1537 * Makefile.in: get the name of the library right
1539 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1541 * z8k-dis.c: knows how to disassemble z8k stuff
1542 * z8k-opc.h: new file full of z8000 opcodes
1546 version-control: never