2 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-dis.c (disassemble): Make static. Provide prototype.
6 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
8 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
11 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
13 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
14 ']' characters into the output stream.
15 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
16 Add "memop" field to all opcodes (for the disassembler).
17 Reorder opcodes so that "nop" comes before "mov" and "jr"
20 * v850-dis.c (print_insn_v850): Fix typo in last change.
22 * v850-dis.c (print_insn_v850): Properly handle disassembling
23 a two byte insn at the end of a memory region when the memory
24 region's size is only two byte aligned.
26 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
28 * v850-dis.c (v850_reg_names): Define.
29 (v850_sreg_names, v850_cc_names): Likewise.
30 (disassemble): Very rough cut at printing operands (unformatted).
32 * v850-opc.c (BOP_MASK): Fix.
33 (v850_opcodes): Fix mask for jarl and jr.
35 * v850-dis.c: New file. Skeleton for disassembler support.
36 * Makefile.in Remove v850 references, they're not needed here
37 and they weren't being sanitized away.
38 * configure.in: Add v850-dis.o when building v850 toolchains.
40 * disassemble.c (disassembler): Call v850 disassembler.
42 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
43 (insert_d8_6, extract_d8_6): New functions.
44 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
45 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
47 (IF4A, IF4B): Use "D7" instead of "D7S".
48 (IF4C, IF4D): Use "D8_7" instead of "D8".
49 (IF4E, IF4F): New. Use "D8_6".
50 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
51 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
53 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
54 (v850_operands): Change D16 to D16_15, use special insert/extract
55 routines. New new D16 that uses the generic insert/extract code.
56 (IF7A, IF7B): Use D16_15.
57 (IF7C, IF7D): New. Use D16.
58 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
60 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
61 message. Issue an error if the branch offset is odd.
63 * v850-opc.c: Add notes about needing special insert/extract
64 for all the load/store insns, except "ld.b" and "st.b".
66 * v850-opc.c (insert_d22, extract_d22): New functions.
67 (v850_operands): Use insert_d22 and extract_d22 for
69 (insert_d9): Fix range check.
71 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
73 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
74 and set bits field to D9 and D22 operands.
76 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
78 * v850-opc.c (v850_operands): Define SR2 operand.
79 (v850_opcodes): "ldsr" uses R1,SR2.
81 * v850-opc.c (v850_opcodes): Fix opcode specs for
82 sld.w, sst.b, sst.h, sst.w, and nop.
84 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
86 * v850-opc.c (v850_opcodes): Add null opcode to mark the
87 end of the opcode table.
91 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
93 * d10v-opc.c (pre_defined_registers): Added register pairs,
94 "r0-r1", "r2-r3", etc.
98 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
100 * v850-opc.c (v850_operands): Make I16 be a signed operand.
101 Create I16U for an unsigned 16bit mmediate operand.
102 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
104 * v850-opc.c (v850_operands): Define EP operand.
105 (IF4A, IF4B, IF4C, IF4D): Use EP.
107 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
108 with immediate operand, "movhi". Tweak "ldsr".
110 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
111 correct. Get sld.[bhw] and sst.[bhw] closer.
113 * v850-opc.c (v850_operands): "not" is a two byte insn
115 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
117 * v850-opc.c (v850_operands): D16 inserts at offset 16!
119 * v850-opc.c (two): Get order of words correct.
121 * v850-opc.c (v850_operands): I16 inserts at offset 16!
123 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
124 register source and destination operands.
125 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
127 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
128 same thinko in "trap" opcode.
130 * v850-opc.c (v850_opcodes): Add initializer for size field
133 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
134 Add D8 for 8-bit unsigned field in short load/store insns.
135 (IF4A, IF4D): These both need two registers.
136 (IF4C, IF4D): Define. Use 8-bit unsigned field.
137 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
138 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
139 for "ldsr" and "stsr".
140 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
143 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
144 short store word (sst.w).
146 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
148 * v850-opc.c (v850_operands): Added insert and extract fields,
149 pointers to functions that handle unusual operand encodings.
151 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
153 * v850-opc.c (v850_opcodes): Enable "trap".
155 * v850-opc.c (v850_opcodes): Fix order of displacement
156 and register for "set1", "clr1", "not1", and "tst1".
158 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
160 * v850-opc.c (v850_operands): Add "B3" support.
161 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
164 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
166 * v850-opc.c: Close unterminated comment.
168 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
170 * v850-opc.c (v850_operands): Add flags field.
171 (v850_opcodes): add move opcodes.
173 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
175 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
176 * configure: (bfd_v850v_arch) Add new case.
177 * configure.in: (bfd_v850_arch) Add new case.
178 * v850-opc.c: New file.
181 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
183 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
186 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
188 * d10v-opc.c: Add additional information to the opcode
189 table to help determinine which instructions can be done
193 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
195 * mpw-make.sed: Update editing of include pathnames to be
198 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
200 * arm-opc.h: Added "bx" instruction definition.
202 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
204 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
207 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
209 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
211 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
213 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
216 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
218 * makefile.vms: Update for alpha-opc changes.
220 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
222 * i386-dis.c (print_insn_i386): Actually return the correct value.
223 (ONE, OP_ONE): #ifdef out; not used.
226 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
228 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
229 Changed subi operand type to treat 0 as 16.
232 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
234 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
237 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
239 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
240 memory transfer instructions. Add new format string entries %h and %s.
241 * arm-dis.c: (print_insn_arm): Provide decoding of the new
245 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
247 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
248 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
251 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
253 * alpha-dis.c (print_insn_alpha_osf): Remove.
254 (print_insn_alpha_vms): Remove.
255 (print_insn_alpha): Make globally visible. Chose the register
256 names based on info->flavour.
257 * disassemble.c: Always return print_insn_alpha for the alpha.
260 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
262 * d10v-dis.c (dis_long): Handle unknown opcodes.
264 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
266 * d10v-opc.c: Changes to support signed and unsigned numbers.
267 All instructions with the same name that have long and short forms
268 now end in ".l" or ".s". Divs added.
269 * d10v-dis.c: Changes to support signed and unsigned numbers.
271 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
273 * d10v-dis.c: Change all functions to use info->print_address_func.
276 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
278 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
279 move ccr/sr insns more strict so that the disassembler only
280 selects them when the addressing mode is data register.
283 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
284 * d10v-opc.c (pre_defined_registers): Declare.
285 * d10v-dis.c (print_operand): Now uses pre_defined_registers
286 to pick a better name for the registers.
289 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
291 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
292 operands for fexpand and fpmerge. From Christian Kuehnke
293 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
295 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
297 * alpha-dis.c (print_insn_alpha): No longer the user-visible
298 print routine. Take new regnames and cpumask arguments.
299 Kill the environment variable nonsense.
300 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
301 (print_insn_alpha_vms): New function. Do VMS style regnames.
302 * disassemble.c (disassembler): Test bfd flavour to pick
303 between OSF and VMS routines. Default to OSF.
305 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
307 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
308 * configure: Rebuild.
309 * Makefile.in (install): Use @INSTALL_SHLIB@.
312 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
314 * configure: (bfd_d10v_arch) Add new case.
315 * configure.in: (bfd_d10v_arch) Add new case.
316 * d10v-dis.c: New file.
317 * d10v-opc.c: New file.
318 * disassemble.c (disassembler) Add entry for d10v.
321 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
323 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
324 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
326 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
328 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
329 distinguish between variants of the instruction set.
330 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
331 distinguish between variants of the instruction set.
333 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
335 * i386-dis.c (print_insn_i8086): New routine to disassemble using
336 the 8086 instruction set.
337 * i386-dis.c: General cleanups. Make most things static. Add
338 prototypes. Get rid of static variables aflags and dflags. Pass
339 them as args (to almost everything).
341 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
343 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
345 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
347 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
348 if the next arg is marked with SRC_IN_DST. Gross.
350 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
351 we're looking for and find EXR.
353 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
354 if we're looking for KBIT and we don't find it.
356 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
359 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
360 3bit immediate operands.
362 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
364 * Released binutils 2.7.
366 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
367 <kkaempf@progis.ac-net.de>.
369 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
371 * alpha-opc.c: Correct second case of "mov" to use OPRL.
373 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
375 * sparc-dis.c (print_insn_sparclite): New routine to print
376 sparclite instructions.
378 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
380 * m68k-opc.c (m68k_opcodes): Add coldfire support.
382 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
384 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
385 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
386 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
388 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
390 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
391 Use autoconf-set values.
392 (docdir, oldincludedir): Removed.
393 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
395 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
397 * alpha-opc.c: New file.
398 * alpha-opc.h: Remove.
399 * alpha-dis.c: Complete rewrite to use new opcode table.
400 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
401 * configure: Rebuild with autoconf 2.10.
402 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
403 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
405 (alpha-opc.o): New target.
407 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
409 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
410 Set imm_added_to_rs1 even if the source and destination register
413 * sparc-opc.c: Add some two operand forms of the wr instruction.
415 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
417 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
420 * disassemble.c (disassembler): Handle H8/S.
421 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
423 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
425 * sparc-opc.c: Add beq/teq as aliases for be/te.
427 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
428 <sergei@msil.sps.mot.com>.
430 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
432 * makefile.vms: New file.
434 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
436 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
438 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
441 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
443 * i386-dis.c (OP_OFF): Call append_prefix.
445 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
447 * ppc-opc.c (instruction encoding macros): Add explicit casts to
448 unsigned long to silence a warning from the Solaris PowerPC
451 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
453 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
455 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
457 * sparc-dis.c (X_IMM,X_SIMM): New macros.
459 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
460 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
461 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
462 cpush, cpusha, cpull sparclet insns.
464 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
466 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
468 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
470 * sparc-opc.c: Set F_FBR on floating point branch instructions.
471 Set F_FLOAT on other floating point instructions.
473 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
475 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
477 (powerpc_opcodes): Add 860/821 specific SPRs.
479 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
481 * configure.in: Permit --enable-shared to specify a list of
482 directories. Set and substitute BFD_PICLIST.
483 * configure: Rebuild.
484 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
485 uses. Set to @BFD_PICLIST@.
487 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
489 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
490 not "abs", which may be needed for the absolute in something
491 like btst #0,@10:8. Print L_3 immediates separately from other
492 immediates. Change ABSMOV reference to ABS8MEM.
494 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
496 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
497 (current_arch_mask): New static global.
498 (compute_arch_mask): New static function.
499 (print_insn_sparc): Delete sparc_v9_p. New static local
500 current_mach. Resort opcode table if current_mach changes.
501 Generalize "insn not supported" test.
502 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
503 Delete test for v9/!v9.
504 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
506 (brfc): Split into CBR and FBR for coprocessor/fp branches.
507 (brfcx): Renamed to FBRX.
508 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
509 coprocessor mnemonics are not supported on the sparclet).
510 (condf): Renamed to CONDF.
511 (SLCBCC2): Delete F_ALIAS flag.
513 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
515 * sparc-opc.c (sparc_opcodes): rd must be 0 for
516 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
518 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
520 * Makefile.in (config.status): Depend upon BFD VERSION file, so
521 that the shared library version number is set correctly.
523 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
525 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
526 Miles Bader <miles@gnu.ai.mit.edu>.
527 * configure: Rebuild.
529 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
531 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
534 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
536 * configure: Rebuild with autoconf 2.8.
538 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
540 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
541 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
543 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
545 * configure.in: Don't set SHLIB or SHLINK to an empty string,
546 since they appear as targets in Makefile.in.
547 * configure: Rebuild.
549 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
551 * mpw-make.sed: Edit out shared library support bits.
553 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
555 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
556 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
557 (sparc_opcodes): Add sparclet insns.
558 (sparclet_cpreg_table): New static local.
559 (sparc_{encode,decode}_sparclet_cpreg): New functions.
560 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
562 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
564 * i386-dis.c (index16): New static variable.
565 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
567 (OP_indirE): Return result of OP_E.
568 (OP_E): Check for 16 bit addressing mode, and disassemble
569 correctly. Optimised 32 bit case a little. Don't print
570 "(base,index,scale)" when sib specifies only an offset.
572 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
574 * configure.in: Set and substitute SHLIB_DEP.
575 * configure: Rebuild.
576 * Makefile.in (SHLIB_DEP): New variable.
577 (LIBIBERTY_LISTS, BFD_LIST): New variables.
578 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
579 COMMON_SHLIB, add them to piclist with appropriate modifications.
580 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
581 here: just use piclist.
583 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
585 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
586 (print_insn_sparc): Rewrite v9/not-v9 tests.
587 (compare_opcodes): Likewise.
588 * sparc-opc.c (MASK_<ARCH>): Define.
589 (v6,v7,v8,sparclite,v9,v9a): Redefine.
590 (sparclet,v6notv9): Define.
591 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
592 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
594 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
596 * configure.in: Call AC_PROG_CC before configure.host.
597 * configure: Rebuild.
599 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
601 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
603 * i386-dis.c (onebyte_has_modrm): New static array.
604 (twobyte_has_modrm): New static array.
605 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
607 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
609 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
612 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
614 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
617 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
619 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
620 m68010up, not just m68020up | cpu32.
622 * Makefile.in (SONAME): New variable.
623 ($(SHLINK)): Make a link to the transformed name, as well.
624 (stamp-tshlink): New target.
625 (install): Skip stamp-tshlink during install.
627 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
629 * configure.in: Call AC_ARG_PROGRAM.
630 * configure: Rebuild.
631 * Makefile.in (program_transform_name): New variable.
632 (install): Transform library name before installing it.
634 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
636 * i960-dis.c (mem): Add HX dcinva instruction.
638 Support for building as a shared library, based on patches from
639 Alan Modra <alan@spri.levels.unisa.edu.au>:
640 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
641 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
642 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
643 * configure: Rebuild.
644 * Makefile.in (ALLLIBS): New variable.
645 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
646 (COMMON_SHLIB, SHLINK): New variables.
647 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
648 (STAGESTUFF): Remove variable.
649 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
650 (stamp-piclist, piclist): New targets.
651 ($(SHLIB), $(SHLINK)): New targets.
652 ($(OFILES)): Depend upon stamp-picdir.
653 (disassemble.o): Build twice if PICFLAG is set.
654 (MOSTLYCLEAN): Add pic/*.o.
655 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
656 (distclean): Remove pic and stamp-picdir.
657 (install): Install shared libraries.
658 (stamp-picdir): New target.
660 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
662 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
663 Print unknown instruction as "unknown", rather than in hex.
665 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
667 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
669 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
671 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
673 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
675 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
676 when necessary. From Ulrich Drepper
677 <drepper@myware.rz.uni-karlsruhe.de>.
679 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
681 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
682 sparc_num_opcodes. Update architecture enum values.
683 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
684 (sparc_opcode_lookup_arch): New function.
685 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
686 (sparc_opcodes): Add v9a shutdown insn.
688 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
690 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
691 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
693 (print_insn_sparc64): Deleted.
694 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
697 * sparc-opc.c (architecture_pname): Add v9a.
699 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
701 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
702 incorrectly defined as 0x16 when it should be 0x15.
703 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
704 (alpha_insn_set): added cvtst and cvttq float ops. Also added
705 excb (exception barrier) which is defined in the Alpha
706 Architecture Handbook version 2.
707 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
708 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
709 disassembled as or, for example.
711 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
713 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
714 (_print_insn_mips): Change i from int to unsigned int.
716 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
718 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
719 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
721 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
723 * i386-dis.c: Added Pentium Pro instructions.
725 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
727 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
730 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
732 * sh-opc.h (sh_nibble_type): Added REG_B.
733 (sh_arg_type): Added A_REG_B.
734 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
736 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
738 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
740 * disassemble.c (disassembler): Use new bfd_big_endian macro.
742 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
744 * Makefile.in (distclean): Remove stamp-h. From Ronald
745 F. Guilmette <rfg@monkeys.com>.
747 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
749 From David Mosberger-Tang <davidm@azstarnet.com>:
750 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
753 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
755 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
756 (sh_table): Added many SH3 opcodes.
757 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
759 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
761 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
762 (subco,subco.): Mark this PPC, not PPCCOM.
764 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
766 * configure: Rebuild with autoconf 2.7.
768 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
770 * configure: Rebuild with autoconf 2.6.
772 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
774 * configure.in: Sort list of architectures. Accept but do nothing
775 for alliant, convex, pyramid, romp, and tahoe.
777 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
779 * a29k-dis.c (print_special): Change num to unsigned int.
781 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
783 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
786 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
788 * configure.in: Call AC_CHECK_PROG to find and cache AR.
789 * configure: Rebuilt.
791 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
793 * configure.in: Add case for bfd_i860_arch.
794 * configure: Rebuild.
796 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
798 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
799 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
800 (NEXTDOUBLE): Likewise.
801 (print_insn_m68k): Don't match fmoveml if there is more than one
802 register in the list.
803 (print_insn_arg): Handle a place of '8' for a type of 'L'.
805 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
807 * m68k-opc.c: Use #W rather than #w.
808 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
810 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
812 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
813 and likewise for all the dbxx opcodes.
815 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
817 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
819 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
821 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
822 the VR4100 specific instructions to the mips_opcodes structure.
824 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
826 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
827 ugly Metrowerks bug in CW6, is fixed in CW7.
829 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
831 * ppc-opc.c (whole file): Add flags for common/any support.
833 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
835 * Makefile.in (BISON): Remove macro.
836 (FLAGS_TO_PASS): Remove BISON.
838 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
840 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
842 * m68k-dis.c (print_insn_m68k): Recognize all two-word
843 instructions that take no args by looking at the match mask.
844 (print_insn_arg): Always print "%" before register names.
845 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
846 [case '_']: Don't print "@#" before address.
847 [case 'J']: Use "%s" as format string, not register name.
848 [case 'B']: Treat place == 'C' like 'l' and 'L'.
850 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
852 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
855 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
857 From David Mosberger-Tang <davidm@azstarnet.com>
859 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
860 (alpha_insn_set): added definitions for VAX floating point
861 instructions (Unix compilers don't generate these, but handcoded
862 assembly might still use them).
864 * alpha-dis.c (print_insn_alpha): added support for disassembling
865 the miscellaneous instructions in the Alpha instruction set.
867 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
869 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
870 no longer create sysdep.h, sed ppc-opc.c to work around a
871 serious Metrowerks C bug.
872 * mpw-make.in: Remove.
873 * mpw-make.sed: New file, used by mpw-configure to edit
874 Makefile.in into an MPW makefile.
876 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
878 * Makefile.in (maintainer-clean): New synonym for realclean.
880 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
882 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
883 which use '0', '1', and '2' instead. Specify the proper size for
884 a pmove immediate operand. Correct the pmovefd patterns to be
885 moves to a register, not from a register.
886 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
888 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
890 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
891 %psr, %wim, %tbr as F_NOTV9.
893 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
895 * Makefile.in (Makefile): Just rebuild Makefile when running
897 (config.h, stamp-h): New targets.
898 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
899 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
901 * configure: Rebuild.
903 * mips-opc.c: Change unaligned loads and stores with "t,A"
904 operands to use "t,A(b)".
906 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
908 * sh-dis.c (print_insn_shx): Add F_FR0 support.
910 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
912 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
913 until 3 instead of until 2.
915 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
917 * Makefile.in (ALL_CFLAGS): Define.
918 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
919 (MOSTLYCLEAN): Add config.log.
920 (distclean): Don't remove config.log.
921 * configure.in: Substitute HDEFINES.
922 * configure: Rebuild.
924 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
926 * sh-opc.h (sh_arg_type): Add F_FR0.
927 (sh_table, case fmac): Add F_FR0 as first argument.
929 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
931 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
933 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
935 * sparc-dis.c: Remove all references to NO_V9.
937 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
939 * aclocal.m4: Just include ../bfd/aclocal.m4.
940 * configure: Rebuild.
942 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
944 * sparc-dis.c (X_DISP19): Define.
945 (print_insn, case 'G'): Use it.
946 (print_insn, case 'L'): Sign extend displacement.
948 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
950 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
951 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
952 host_makefile_frag or frags.
953 * aclocal.m4: New file.
954 * configure: Rebuild.
955 * Makefile.in (INSTALL): Set to @INSTALL@.
956 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
957 (INSTALL_DATA): Set to @INSTALL_DATA@.
959 (AR_FLAGS): Set to rc rather than qc.
960 (CC): Define as @CC@.
961 (CFLAGS): Set to @CFLAGS@.
962 (@host_makefile_frag@): Remove.
963 (config.status): Remove dependency upon @frags@.
965 * configure.in: ../bfd/config.bfd now just sets shell variables.
966 Use them rather than looking through target Makefile fragments.
967 * configure: Rebuild.
969 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
971 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
973 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
975 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
976 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
979 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
980 (lookup_{name,value}): New functions.
981 (prefetch_table): New static local.
982 (sparc_{encode,decode}_prefetch): New functions.
983 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
985 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
987 * sh-opc.h: Add blank lines to improve readabililty of sh3e
990 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
992 * sh-dis.c: Correct comment on first line of file.
994 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
996 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
998 * sparc-opc.c (asi, membar): New static locals.
999 (sparc_{encode,decode}_{asi,membar}): New functions.
1000 (sparc_opcodes, membar insn): Fix.
1001 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1002 Support decoding of membar masks.
1005 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1007 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1009 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1011 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1012 and likewise for the other branches. Add bhs as an alias for bcc,
1013 and likewise for the size variants. Add dbhs as an alias for
1016 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1018 * sh-opc.h (FP sts instructions): Update to match reality.
1020 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1022 * m68k-dis.c: (fpcr_names): Add % before all register names.
1023 (reg_names): Likewise.
1024 (print_insn_arg): Don't explicitly print % before register names.
1025 Add % before register names in static array names. In case 'r',
1026 print data registers as `@(Dn)', not `Dn@'. When printing a
1027 memory address, don't print @# before it.
1028 (print_indexed): Change base_disp and outer_disp from int to
1029 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1030 syntax. Sign extend 8 byte displacement correctly.
1031 (print_base): Print using MIT syntax. Print zpc when appropriate.
1032 Change parameter disp from int to bfd_vma.
1034 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1037 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1039 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1040 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1041 * sh-opc.h (sh_arg_type): Add new operand types.
1042 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1044 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1046 * Makefile.in (distclean): Remove generated file config.h.
1048 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1050 * Makefile.in (distclean): Remove generated file config.h.
1052 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1054 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1056 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1058 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1059 rather than numopcodes. Use m68k_opcodes rather than removed
1060 opcode function. Don't check F_ALIAS.
1061 (print_insn_arg): Change first parameter to be const char *.
1062 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1063 (m68k-opc.o): New target.
1064 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1065 * configure: Rebuild.
1067 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1069 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1070 (opcode_bits, opcode_hash_table): New variables.
1071 (opcodes_initialized): Renamed from opcodes_sorted.
1072 (build_hash_table): New function.
1073 (is_delayed_branch): Use hash table.
1074 (print_insn): Renamed from print_insn_sparc, made static.
1075 Build and use hash table. If !sparc64, ignore sparc64 insns,
1076 and vice-versa if sparc64.
1077 (print_insn_sparc, print_insn_sparc64): New functions.
1078 (compare_opcodes): Move sparc64 opcodes to end.
1079 Print commutative insns with constant second.
1080 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1082 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1084 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1085 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1086 avoids printing a delay slot in a delay slot.
1087 * sh-opc.h (sh_table): Fully bracket last entry.
1089 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1091 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1093 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1095 * configure.in: Get host_makefile_frag from ${srcdir}.
1097 * configure.in: Autoconfiscated. Check for string[s].h. Create
1098 config.h from config.in. Don't set up sysdep.h link.
1099 * sysdep.h: New file.
1100 * configure, config.in: New files, generated from configure.in.
1101 * Makefile.in: Updated to be processed autoconf-style.
1102 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1103 (Makefile): Depend on config.status.
1104 (config.status): New rule.
1105 * configure.bat: Update Makefile substitutions.
1107 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1109 * mips-opc.c (L1): Define.
1110 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1111 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1114 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1116 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1117 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1118 have multiple add units but only a single logical unit.
1120 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1121 shifted by 18, without any insertion or extraction function.
1122 (insert_cr, extract_cr): Remove.
1125 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1127 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1130 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1132 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1135 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1137 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1138 * sh-opc.h: Add copyright.
1140 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1142 * Makefile.in (crunch-m68k): Delete extra target accidentally
1143 checked in a while ago.
1145 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1147 * sh-opc.h (sh_table): Add SH3 support.
1149 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1151 * sh-opc.h: Added bsrf and braf.
1153 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1155 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1156 bogus [ls]fm{ea,fd} patterns.
1158 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1159 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1160 initialize it from memory. Make function static.
1161 (print_insn_{big,little}_arm): New functions.
1162 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1163 the correct endianness.
1166 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1168 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1169 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1172 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1174 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1177 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1179 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1180 17th, so that it builds again using GCC as the compiler.
1182 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1184 * mips-dis.c (print_insn_little_mips): Cast return value from
1185 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1186 expects an unsigned long, and that might be fewer words of
1187 argument storage (e.g., if bfd_vma is long long on a 32-bit
1189 (print_insn_big_mips): Likewise with bfd_getb32 value.
1190 (_print_insn_mips): Now static.
1192 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1194 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1195 gcc memory hog problem with initializer is fixed.
1198 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1200 * arc-opc.c (NULL): Define.
1201 (arc_operands, insn fields u,s): Delete.
1202 (arc_operands, insn fields a,b,c): Mark as signed.
1203 (arc_opcodes): No longer const, links computed at run-time.
1204 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1205 suffixes that affect the insn code.
1206 (arc_opcodes): Resort table to macros are first.
1207 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1208 (arc_opcodes, st [b] entry): Likewise.
1209 (arc_opcodes, st [b,d] entry): Fix mask, value.
1210 (arc_reg_names): Add entries for r29, r30, r31, r60.
1211 (opcode_map, icode_map): New static globals.
1212 (arc_opcode_init_tables): Initialize them.
1213 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1214 (insert_shimmoffset): Signal error if register present.
1216 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1219 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1221 Merge in support for Mac MPW as a host.
1222 (Old change descriptions retained for informational value.)
1224 * mpw-config.in (archname): Compute from the config.
1225 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1227 * mpw-config.in (target_arch): Compute from canonical target.
1228 (m68k, mips, powerpc, sparc): Add architectures.
1229 * mpw-make.in (disassemble.c.o): Add.
1230 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1232 * mpw-config.in (BFD_MACHINES): Set to a default value.
1233 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1235 * mpw-make.in (CSEARCH): Add extra-include to search path.
1237 * mpw-config.in (varargs.h): Don't create.
1238 (sysdep.h): Create using forward-include.
1239 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1241 * mpw-config.in: New file, MPW version of configure.in.
1242 * mpw-make.in: New file, MPW version of Makefile.in.
1245 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1247 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1248 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1249 (print_insn_*): Pass bfd mach number, not opcode version.
1250 * arc-opc.c (arc_get_opcode_mach): New function.
1253 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1255 * alpha-dis.c (print_insn_alpha): Put empty statement after
1258 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1260 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1261 (low_sign_extend): Likewise.
1262 (get_field): Delete unused function.
1263 (set_field, deposit_14, deposit_21): Likewise.
1265 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1267 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1270 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1272 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1274 * alpha-opc.h (OSF_ASMCODE): define
1275 print pal-code names as defined in App C of the
1276 Alpha Architecture Reference Manual
1278 * alpha-dis.c: cleaned up output
1279 print stylized code forms as defined in App A.4.3 of the
1280 Alpha Architecture Reference Manual
1282 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1284 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1286 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1289 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1291 * m68k-dis.c (opcode): New function. Returns address of opcode
1292 table entry given index, even if the opcode table was split to
1293 work around gcc bugs.
1294 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1296 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1297 (reg_names): Now const.
1298 (print_insn_arg): Arrays cacheFieldName and names now const.
1299 (print_indexed): Array scales now const.
1302 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1304 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1305 (print_insn_arc_{host,graphics,audio}): Likewise.
1306 (print_insn): Add prototype.
1307 (arc_get_disassembler): New arg `big_p'. Return little or big
1308 print fn accordingly.
1309 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1310 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1311 (arc_opval_supported): Likewise.
1312 * disassemble.c (disassembler): Pass big endian flag to
1313 arc_get_disassembler.
1316 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1318 * ppc-opc.c: Sort recently added instructions by minor opcode
1319 number within major opcode number.
1321 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1323 * hppa-dis.c: Include libhppa.h.
1325 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1327 * mips-opc.c: Change dli to use M_DLI, and add dla.
1329 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1331 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1334 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1336 * arc-dis.c (arc_get_disassembler): Change argument to int,
1337 one of bfd_mach_arc_xxx. All callers updated.
1340 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1342 * mips-opc.c: Add r4650 mul instruction.
1344 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1346 * mips-opc.c: Add uld and usd macros for unaligned double load and
1349 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1351 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1352 mfdcr, mtdcr, icbt, iccci.
1355 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1357 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1358 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1359 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1360 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1361 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1362 (insert_absaddr): New function.
1364 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1366 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1367 New argument `cpu', pass it to arc_opcode_init_tables.
1368 Document byte order dependencies. Ignore unsupported insns.
1369 (arc_get_disassembler): New function.
1370 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1371 print_insn_arc_audio): New functions.
1372 * arc-opc.c (MULTSHIFT operand): Delete.
1373 (UNSIGNED, SATURATION): New operands.
1374 (mac, mul, mul64, mulu64): New insns.
1375 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1376 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1377 (host,graphics,audio extended and auxiliary regs): Define.
1378 (ss, sc, mh, ml): New suffixes.
1379 (arc_opcode_supported, arc_opval_supported): New functions.
1380 (insert_multshift, extract_multshift): Deleted.
1381 * disassemble.c (disassembler, case bfd_arch_arc): Call
1382 arc_get_disassembler to get disassembler routine.
1385 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1387 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1388 signed char fields to shorts, more portable.
1390 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1392 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1393 char fields as signed chars, since they may have negative values.
1395 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1397 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1398 (mycroft@netbsd.org).
1400 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1402 From "Logg, Ed" <elogg@ea.com>:
1403 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1404 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1407 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1409 * ppc-opc.c: Changes based on patch from David Edelsohn
1410 <edelsohn@mhpcc.edu>.
1411 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1414 (insert_tbr): New static function.
1415 (extract_tbr): New static function.
1416 (XFXFXM_MASK, XFXM): Define.
1417 (XSPRBAT_MASK, XSPRG_MASK): Define.
1418 (powerpc_opcodes): Add instructions to access special registers by
1419 name. Add mtcr and mftbu.
1421 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1423 * mips-opc.c (P3): Define.
1424 (mips_opcodes): Add mad and madu.
1426 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1428 * configure.in: Add W65 support.
1429 * disassemble.c: Likewise.
1430 * w65-opc.h, w65-dis.c: New files.
1432 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1434 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1438 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1440 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1442 * arc-opc.c (extract_reladdr): New function.
1443 (insert_reladdr): Store address right-shifted by 2.
1446 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1448 * mips-opc.c: Add dli as a synonym for li.
1451 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1453 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1455 (extraction fns): Insn argument now array of two words. Return pointer
1456 to value's table entry. All uses changed.
1457 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1458 (insert_multshift, extract_multshift): New fns.
1459 (arc_operands): Add support for cache bypass suffix. Add support for
1460 predefined aux regs. Modifier bits moved to flags field.
1461 (arc_opcodes): Likewise.
1462 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1463 New insn rlc. Update to syntax in programmer's manual.
1464 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1465 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1467 (arc_opcode_init_tables): New argument to indicate cpu type.
1468 (insert_reg): Handle predefined aux regs.
1469 (extract_reg): Likewise.
1470 (lookup_register): New fn.
1471 * arc-dis.c (arc_condition_codes): Deleted.
1472 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1473 Clean up modifier handling. Handle predefined aux regs.
1476 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1478 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1479 print something for reserved opcode values, even if it won't
1482 * mips-dis.c (_print_insn_mips): When initializing, shift right
1483 and mask, to avoid sign extension problems on the Alpha.
1485 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1489 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1491 * configure.in: Add ARC support.
1492 * disassemble.c: Likewise.
1493 * arc-dis.c, arc-opc.c: New files.
1496 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1498 * sh-opc.h (mov.l gbr): Get direction right.
1499 * sh-dis.c (print_insn_shx): New function.
1500 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1501 print opcodes with right byte order.
1503 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1505 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1506 to avoid conflicts with getopt.
1508 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1510 * hppa-dis.c (print_insn_hppa): Read the instruction using
1511 bfd_getb32, so that it works on a little endian or 64 bit host.
1512 Remove unused local variable op.
1514 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1516 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1517 addu does not work correctly if -mips3.
1519 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1521 * a29k-dis.c (print_special): Add special register names defined
1522 on 29030, 29040 and 29050.
1523 (print_insn): Handle new operand type 'I'.
1525 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1527 * Makefile.in (INSTALL): Use top level install.sh script.
1529 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1531 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1532 that it works on a little endian host.
1534 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1536 * configure.in: Use ${config_shell} when running config.bfd.
1538 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1540 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1542 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1544 * a29k-dis.c (print_insn): Print the opcode.
1546 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1548 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1550 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1552 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1554 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1556 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1557 which store a value into memory.
1559 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1561 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1562 * arm-dis.c, arm-opc.h: New files.
1564 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1566 * Makefile.in (ns32k-dis.o): Add dependency.
1567 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1568 string, not as array of chars.
1570 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1572 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1574 * sparc-opc.c: Added sparclite extended FP operations, and
1575 versions of v9 impdep* instructions permitting specification of
1578 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1580 * i960-dis.c (reg_names): Now const.
1581 (struct sparse_tabent): New type, copied from array type in mem
1583 (ctrl): Local static array ctrl_tab now const.
1584 (cobr): Local static array cobr_tab now const.
1585 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1586 static variable mem_tab no longer explicitly initialized. Changed
1587 mem_init to const array of struct sparse_tabent.
1588 (reg): Local static variable reg_tab no longer explicitly
1589 initialized. Changed reg_init to const array of struct
1591 (ea): Local static array scale_tab now const.
1593 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1596 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1598 * configure.bat: the disassember needs to be enabled for
1599 "objdump -d" to work in djgpp.
1601 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1603 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1604 (invalid_float): Enabled general version, doesn't require running
1605 on ns32k host. Changed to take char* argument, and test for
1606 explicitly specified sizes, instead of using sizeof() on host CPU
1608 (INVALID_FLOAT): Cast first argument.
1609 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1610 list_P032, list_M032): Now const.
1611 (optlist, list_search): Made appropriate arguments now point to
1613 (print_insn_arg): Changed static array of one-character-string
1614 pointers into a static const array of characters; fixed sprintf
1615 statement accordingly.
1617 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1619 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1620 from distribution. A ns32k-dis.c from a previous distribution has
1621 been brought up to date and supports the new interface.
1623 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1625 * configure.in: add bfd_ns32k_arch target support.
1627 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1628 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1630 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1632 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1635 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1637 * h8300-dis.c, mips-dis.c: Don't use true and false.
1639 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1641 * configure.in: Change --with-targets to --enable-targets.
1643 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1645 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1646 opcodes to the first instruction with that opcode, to speed
1647 disassembly of large files. From ralphc@pyramid.com (Ralph
1650 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1652 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1654 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1656 * configure.bat: update to latest makefile.in
1658 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1660 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1661 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1662 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1663 slot insn is in a delay slot.
1664 * z8k-opc.h: (resflg): Fix patterns.
1665 * h8500-opc.h Fix CR insn patterns.
1667 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1669 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1670 "cmpl" before POWER versions, so that gas -many uses them.
1672 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1674 * disassemble.c: New file.
1675 * Makefile.in (OFILES): Add disassemble.o.
1676 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1677 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1678 binutils/configure.in.
1680 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1681 opcode being examined.
1683 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1685 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1686 (insert_ral, insert_ram, insert_ras): New functions.
1687 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1688 RAS for store with update.
1690 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1692 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1693 (edelsohn@npac.syr.edu).
1695 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1697 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1700 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1702 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1704 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1706 * ppc-opc.c (powerpc_operands): The signedp field has been
1707 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1708 instead. Add new operand SISIGNOPT.
1709 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1710 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1711 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1714 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1716 * i386-dis.c (struct private): Renamed to dis_private. `private'
1717 is a reserved word for dynix cc.
1719 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1721 * configure.in: Change error message to refer to bfd/config.bfd
1722 rather than bfd/configure.in.
1724 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1726 * ppc-opc.c: Define POWER2 as short alias flag.
1727 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1730 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1732 * i960-dis.c (print_insn_i960): Don't read a second word for
1733 opcodes 0, 1, 2 and 3.
1735 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1737 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1739 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1741 * m68881-ext.c: Removed; no longer used.
1742 * Makefile.in: Changed accordingly.
1744 * m68k-dis.c (ext_format_68881): Don't declare.
1745 (print_insn_m68k): If an instruction uses place 'i', it uses at
1746 least four fixed bytes.
1747 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1748 extended float, convert to double using floatformat_to_double, not
1749 ieee_extended_to_double, and fetch the data before converting it.
1751 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1753 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1754 davidj@ICSI.Berkeley.EDU (David Johnson).
1756 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1758 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1759 PowerPC uses bdnz[l][a].
1761 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1763 * dis-buf.c, i386-dis.c: Include sysdep.h.
1765 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1767 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1769 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1770 by Motorola PowerPC 601 with PPC_OPCODE_601.
1771 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1772 Disassemble Motorola PowerPC 601 instructions as well as normal
1773 PowerPC instructions.
1775 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1777 * i960-dis.c (reg, mem): Just use a static array instead of
1780 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1782 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1783 condition name index if this is for a negated condition.
1785 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1786 Floating point format for 'H' operand is backwards from normal
1787 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1788 operands (fmpyadd and fmpysub), handle bizarre register
1789 translation correctly for single precision format.
1791 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1792 or 'I' operands if the next format specifier is 'M' (fcmp
1793 condition completer).
1795 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1797 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1798 single number giving a bitmask for the MB and ME fields of an M
1799 form instruction. Change NB to accept 32, and turn it into 0;
1800 also turn 0 into 32 when disassembling. Seperated SH from NB.
1801 (insert_mbe, extract_mbe): New functions.
1802 (insert_nb, extract_nb): New functions.
1803 (SC_MASK): Mask out SA and LK bits.
1804 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1805 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1806 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1807 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1808 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1809 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1810 (powerpc_macros): Define table of macro definitions.
1811 (powerpc_num_macros): Define.
1813 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1814 if PPC_OPERAND_NEXT is set.
1816 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1818 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1819 char. Retrieve contents using bfd_getl32 instead of shifting.
1821 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1823 * ppc-opc.c: New file. Opcode table for PowerPC, including
1824 opcodes for POWER (RS/6000).
1825 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1826 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1827 (CFILES): Add ppc-dis.c.
1828 (ppc-dis.o, ppc-opc.o): New targets.
1829 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1831 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1833 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1834 No space before 'u', 'f', or 'N'.
1836 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1838 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1839 farther than we should.
1841 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1843 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1845 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1847 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1849 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1850 needs it, to prevent reading past the end of a section.
1852 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1854 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1855 Removed t,A case for la; always use t,A(b) case.
1857 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1859 From Ted Lemen <mellon@pepper.ncd.com>
1860 * mips-dis.c (print_insn_arg): Handle 'k'.
1861 * mips-opc.c: Make cache use k, not t.
1863 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1865 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1866 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1867 FLOAT_FORMAT_CODE to put out floating point register names.
1869 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1871 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1873 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1875 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1877 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1879 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1880 larger than 32. Moved dsxx32 variants first for disassembler.
1882 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1884 * z8kgen.c, z8k-opc.h: Add full lda information.
1886 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1888 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1889 movb instructions. Any necessary space will be emitted by
1890 the code to handle nullification completers.
1892 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1894 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1896 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1898 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1899 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1901 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1903 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1905 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1907 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1908 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1910 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1912 * m88k-dis.c (m88kdis): comment change. Remove space after
1914 (printop): handle new arg types DEC and XREG for m88110.
1916 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1918 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1919 type for absolute branch addresses. Delete special
1920 "ble" and "be" code in 'W' operand code.
1922 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1924 * mips-opc.c: Set hazard information correctly for branch
1925 likely instructions.
1927 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1929 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1930 info->fprintf_func for printing and info->print_address_func for
1933 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1935 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1937 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1939 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1940 Corrected second case of "b" for disassembler.
1942 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1944 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1945 to BFD swapping routines to correspond to BFD name changes.
1947 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1949 * mips-opc.c: Change div machine instruction to be z,s,t rather
1950 than s,t. Change div macro to be d,v,t rather than d,s,t.
1951 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1952 rem and remu which generates only the corresponding div
1953 instruction. This is for compatibility with the MIPS assembler,
1954 which only generates the simple machine instruction when an
1955 explicit destination of $0 is used.
1956 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1958 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1960 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1961 WR_31 hazard for bal, bgezal, bltzal.
1963 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1965 * hppa-dis.c (print_insn_hppa): Use print function
1966 from within the disassemble_info, not fprintf_filtered.
1968 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1970 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1971 Law, law@cs.utah.edu.)
1973 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1975 * mips-opc.c ("absu"): Removed.
1978 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1980 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1981 Changed hazard information to distinguish between memory load
1982 delays and coprocessor load delays.
1984 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1986 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1988 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1990 * configure.in: Don't pass cpu to config.bfd.
1992 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1994 * m88k-dis.c (m88kdis): Make class unsigned.
1996 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1998 * alpha-dis.c (print_insn_alpha): One branch format case was
1999 missing the instruction name.
2001 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2003 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2004 Add the arch-specific auxiliary files.
2005 (OFILES): Remove the arch-specific auxiliary files
2006 and use BFD_MACHINES instead of DIS_LIBS.
2007 * configure.in: Set BFD_MACHINES based on --with-targets option.
2009 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2011 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2014 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2016 * sparc-opc.c: Change CONST to const to deal with gcc
2017 -Dconst=__const -traditional.
2019 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2021 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2022 coprocessor instructions out of #if 0, and made them use new
2025 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2027 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2029 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2031 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2032 instruction, for use by the disassembler.
2034 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2035 hand-coded sign extensions that depended on 32-bit host ints.
2036 FIXME, we still depend on big-endian host bitfield ordering.
2037 (sparc_print_insn): Set the insn_info_valid field, and the
2038 other fields that describe the instruction being printed.
2040 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2042 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2043 `jmp' instead of just one of them.
2045 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2047 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2048 (fput_fp_reg_r): Renamed from fput_reg_r.
2049 (fput_fp_reg): New function.
2050 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2052 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2054 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2056 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2058 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2060 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2061 don't output a space.
2063 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2065 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2067 * mips-opc.c: New file, containing opcode table from
2068 ../include/opcode/mips.h.
2069 * Makefile.in: Add it.
2071 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2073 * m88k-dis.c: New file, moved in from gdb and changed to use the
2074 new dis-asm.h disassembler interface.
2075 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2076 (m88k-dis.o): New target.
2078 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2080 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2081 argument string const char * to correspond to opcode/mips.h.
2083 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2085 * mips-dis.c: Updated to account for name changes in new version
2087 * Makefile.in: Added header file dependencies.
2089 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2091 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2093 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2095 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2096 extend, rather than shifts.
2098 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2100 * Makefile.in: Undo 15 June change.
2102 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2104 * m68k-dis.c (print_insn_arg): Change return value to byte count
2106 * m68k-dis.c: Re-write to detect invalid operands before
2107 printing anything, so we can handle this the same way we
2108 handle invalid opcodes.
2110 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2112 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2114 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2116 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2119 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2121 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2123 * configure.in: Do make sysdep.h link.
2124 * Makefile.in: Search ../include. Don't search ../bfd.
2126 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2128 Changes from Jeff Law, law@cs.utah.edu:
2129 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2130 Do not print a space before the completers specified by
2133 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2135 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2136 defined, since gdb has been fixed.
2138 Changes from Jeff Law, law@cs.utah.edu:
2139 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2140 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2141 be a *disassemble_info, not a *FILE.
2142 * hppa-dis.c: Support 'd', '!', and 'a'.
2143 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2144 * hppa-dis.c: Delete cases which are no longer needed.
2146 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2148 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2150 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2152 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2155 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2157 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2158 * configure.in: No longer need to configure to get sysdep.h.
2160 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2162 * Patches from Jeffrey Law <law@cs.utah.edu>.
2163 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2164 templates for 1.1 FP computational instructions.
2166 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2168 * h8500-dis.c (print_insn_h8500): Address argument is type
2170 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2173 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2174 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2176 * sparc-dis.c (compare_opcodes): Move static declaration to
2179 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2181 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2182 instruction, remove unimp hack from 'l' argument.
2184 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2186 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2189 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2191 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2192 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2195 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2197 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2198 arrays of string pointers to 2-d arrays of chars, to save
2201 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2203 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2204 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2206 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2208 * hppa-dis.c: New file from Utah, adapted to new disassembler
2210 * Makefile.in: Include it.
2212 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2214 * sh-dis.c, sh-opc.h: New files.
2216 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2218 * alpha-dis.c, alpha-opc.h: New files.
2220 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2222 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2225 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2227 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2229 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2231 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2234 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2236 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2237 and double percent signs a few places.
2239 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2241 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2242 Use info->print_address_func not print_address.
2244 * dis-buf.c (generic_print_address): New function.
2246 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2248 * Makefile.in: Add sparc-dis.c.
2249 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2251 Add `add' instruction to the set that get checked
2252 for a preceding `sethi' in order to print an absolute address.
2253 * (print_insn): Disassembly prefers real instructions.
2254 (is_delayed_branch): Speed up.
2255 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2256 Still missing some float ops, and needs testing.
2257 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2258 F_ALIAS. Use printf, not fprintf, when not passing a file
2260 (compare_opcodes): Check that identical instructions have
2261 identical opcodes, complain otherwise.
2264 * Include reg_names.
2266 Use dis-asm.h/read_memory_func interface.
2268 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2270 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2271 deliberately return non-zero to setjmp from longjmp. Otherwise
2272 this code fails to compile.
2274 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2276 * m68k-dis.c: Fix prototype for fetch_arg().
2278 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2280 * dis-buf.c: New file, for new read_memory_func interface.
2281 Makefile.in (OFILES): Include it.
2282 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2283 Use new read_memory_func interface.
2285 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2287 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2288 * h8500-opc.h: Fix couple of opcodes.
2290 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2292 * Makefile.in: add dvi & installcheck targets
2294 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2296 * Makefile.in: Update for h8500-dis.c.
2298 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2300 * h8500-dis.c, h8500-opc.h: New files
2302 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2304 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2305 ../include/dis-asm.h.
2306 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2307 and ../gdb/m68k-pinsn.c).
2308 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2309 and ../gdb/i386-pinsn.c).
2310 * m68881-ext.c: New file. Moved definition of
2311 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2312 * Makefile.in: Adjust for new files.
2313 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2314 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2315 can be dis-assembled.
2317 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2319 * mips-dis.c (print_insn_arg): Now returns void.
2321 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2323 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2324 files that use the macros.
2326 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2328 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2329 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2330 (CFILES): Added mips-dis.c.
2332 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2334 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2335 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2337 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2339 * Makefile.in: Improve *clean rules.
2340 * configure.in: Allow a default host.
2342 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2344 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2345 files include other sysdep files
2347 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2349 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2351 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2353 * configure.in: For host support, use ../bfd/configure.host
2354 so it stays in sync with the ../bfd/hosts database.
2356 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2358 * configure.in: use cpu-vendor-os triple instead of nested cases
2360 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2362 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2363 *always* the wrong one.
2365 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2367 * z8kgen.c: added copyright info
2369 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2371 * z8k-dis.c (unparse_instr): prettier tabs
2372 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2374 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2376 * configure.in: Add ncr* configuration.
2377 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2378 picayune ANSI compilers happy.
2380 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2382 * configure.in (i386): Make i386 and i486 synonymous for now.
2383 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2385 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2387 * Makefile.in (install): Fix typo.
2389 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2391 * Makefile.in (make): Remove obsolete crud.
2392 (sparc-opc.o): Avoid Sun Make VPATH bug.
2394 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2396 * Makefile.in: since there are no SUBDIRS, remove rule and
2397 references of subdir_do.
2399 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2401 * Makefile.in (install): Get the library name right here too.
2402 Don't install bfd.h, since it's unrelated to this library. No
2403 subdirs to recurse into, either.
2404 (CFILES): The source file has a .c suffix, not .o.
2406 * sparc-opc.c: New file, moved from BFD.
2407 * Makefile.in (OFILES): Build it.
2409 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2411 * z8k-dis.c: fixed forward refferences of some declarations.
2413 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2415 * Makefile.in: get the name of the library right
2417 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2419 * z8k-dis.c: knows how to disassemble z8k stuff
2420 * z8k-opc.h: new file full of z8000 opcodes
2424 version-control: never
projects / deliverable / binutils-gdb.git / blob