2 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
4 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
5 disassembling last 4 bytes of a section.
8 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
10 Fix some gcc -Wall warnings:
11 * arc-dis.c (print_insn): Add casts to avoid warnings.
12 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
13 * d10v-dis.c (dis_long, dis_2_short): Likewise.
15 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
16 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
17 (parse_bc, parse_vfreg, parse_accdest): Likewise.
18 (parse_ffstreg, parse_vif_mode): Likewise.
20 * m10200-dis.c (disassemble): Likewise.
21 * m10300-dis.c (disassemble): Likewise.
22 * ns32k-dis.c (print_insn_ns32k): Likewise.
23 * ppc-opc.c (insert_ral, insert_ram): Likewise.
24 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
25 * cgen-opc.c (cgen_keyword_search_next): Likewise.
26 * d10v-dis.c (dis_long, dis_2_short): Likewise.
28 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
31 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
32 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
33 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
35 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
37 * tic80-dis.c (print_one_instruction): Likewise.
39 * w65-dis.c (print_operand): Likewise.
40 * z8k-dis.c (fetch_data): Likewise.
41 * a29k-dis.c: Add return type for find_byte_func_type.
42 * arc-opc.c: Include <stdio.h>. Remove declarations of
43 insert_multshift and extract_multshift.
45 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
47 (extract_value): Fully parenthesize expression.
50 * dvp-opc.c: Include <ctype.h>.
51 (print_sdest): Add default case to switch.
53 * h8500-dis.c (print_insn_h8500): Initialize local variables.
54 * h8500-opc.h (h8500_table): Fully bracket initializer.
55 * w65-opc.h (optable): Likewise.
56 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
57 * i386-dis.c (OP_E): Initialize local variables.
58 * m10200-dis.c (print_insn_mn10200): Likewise.
59 * mips-dis.c (print_insn_mips16): Likewise.
60 * sh-dis.c (print_insn_shx): Likewise.
61 * v850-dis.c (print_insn_v850): Likewise.
62 * ns32k-dis.c (print_insn_arg): Declare.
63 (get_displacement, invalid_float): Declare.
64 (list_search, sign_extend, flip_bytes): Declare return type.
65 (get_displacement): Likewise.
66 (print_insn_arg): Likewise. Make d int. Fix sprintf format
68 (print_insn_ns32k): Make i unsigned.
69 (invalid_float): Make static. Declare type of val.
70 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
71 on each for iteration.
72 * tic30-dis.c (get_indirect_operand): Likewise.
73 * z8k-dis.c (print_insn_z8001): Declare return type.
74 (print_insn_z8002): Likewise.
75 (unparse_instr): Fix sprintf format strings.
77 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
79 * mips-opc.c: Add "sync.l" and "sync.p".
82 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
84 * dvp-opc.c (extract_vif_datalen): Rewrite.
85 (vif_insn_len): Perform 0->max+1 conversion for direct length.
87 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
89 * dvp-dis.c (print_insn): Print unpack address in hex.
90 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
91 Don't skip over '*', just record it.
92 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
93 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
94 Don't skip over '*', just record it.
95 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
96 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
97 (vif_opcodes): Likewise.
98 (state_vif_{mpg,unpack}loc_star_p): New static locals.
99 (vif_macros,vif_macro_count): New globals.
100 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
101 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
102 (vif_get_wl_cl): New function.
103 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
106 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
108 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
109 default m68k variant to recognize.
111 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
112 (ctrl, cobr, mem, ea): Likewise.
113 (print_addr): Likewise. Remove cast.
114 (ea): Cast argument of print_addr to bfd_vma.
116 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
118 (cgen_parse_unsigned_integer): Likewise.
119 (cgen_parse_address): Likewise.
121 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
123 * i960-dis.c (ctrl): Add full braces to structure initialization.
124 (cobr, mem, reg): Likewise.
125 (ea): Correct parenthesization in expression.
127 * cgen-asm.c: Include <ctype.h>.
128 (build_asm_hash_table): Remove unused local variable i.
129 (cgen_parse_keyword): Add casts to avoid warnings.
131 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
132 symbol. Fix indentation.
133 (print_insn_little_arm): Likewise.
136 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
138 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
143 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
145 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
150 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
152 * dvp-opc.c (vif_operand_datalen_special): New global.
156 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
158 * vu0.h (vcallms): Use 'O' for call target operand.
159 * mips-dis.c (print_insn_arg): Handle 'O'.
162 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
164 * configure.in: Use AM_DISABLE_SHARED.
165 * aclocal.m4, configure: Rebuild with libtool 1.2.
168 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
170 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
175 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
177 These patches are courtesy of Jonathan Walton and Tony Thompson
178 (athompso@cambridge.arm.com).
180 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
183 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
184 both the offset and the label closest to the destination.
187 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
189 * vu0.h: New file with cop2/vu0 instructions.
190 * mips-opc.c: Include vu0.h.
191 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
193 (print_insn_mips): Do not emit a tab after an instruction if the
194 first arg is an instruction completer (&). If the next arg is an
195 escape character (%), then print the next arg verbatim.
196 * Makefile.am (mips-opc.lo): Depend on vu0.h
200 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
202 * dvp-opc.c (vif_opcodes): Add stcycl.
204 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
206 * dvp-dis.c (print_dma): Change length from 16 to 8.
209 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
211 * m32r-opc.h: Regenerate.
214 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
216 * dvp-opc.c (print_dest1): Print dest spec again.
217 (print_vfreg,print_accdest): Likewise.
218 (vif_unpack_len): Round result up to word boundary.
221 start-sanitize-vr4320
222 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
224 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
226 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
228 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
233 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
235 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
236 (print_insn): Do mask comparison on proper opcode word.
237 Print unsigned values in hex.
238 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
239 (parse_bc): Catch missing dest.
240 (parse_vfreg): Replace atoi call with strtol.
241 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
242 (parse_bcftreg,parse_ffstreg): Handle missing dest.
243 (extract_gif_eop): New function.
244 (gif_operands): Update eop entry.
245 (VGIFOP,VGIFNREGS): Fix calcs.
246 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
247 (gif_regs): Add entry for unused 11 case.
248 (print_gif_regs): Print empty list instead of nothing.
249 (extract_gif_nloop): Fix value calc.
250 (print_gif_nloop): Always print value, even if 0.
251 (insert_vif_wlcl,extract_vif_wlcl): New functions.
252 (vif_operands): Use them for wl,cl fields.
253 (state_vif_wl,state_vif_cl): New static locals.
254 (parse_vif_mode): Handle numeric args.
255 (vif_unpack_len_value,vif_unpack_len): New functions.
256 (vif_insn_len): Call vif_unpack_len.
259 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
261 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
263 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
265 * cgen-asm.in: Move insertion of generated routines to top of file.
266 (insert_normal): Add prototype. Delete `shift' arg.
267 * cgen-dis.in: Move insertion of generated routines to top of file.
268 (extract_normal): Add prototype. Delete `shift' arg.
269 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
270 (print_keyword): Add prototype. Fix type of `attrs' arg.
272 start-sanitize-vr4320
273 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
275 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
276 * mips-opc.c ("mac","dmac") : Added 4320 insns.
279 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
281 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
282 assume that info->symbols is non-empty.
284 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
286 * alpha-opc.c (cvtqs) There is no such thing.
287 (cvttq): Missing most of the /*d variants.
290 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
292 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
294 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
295 (r5900/msub.s): Takes three operands, not four. Fix opcode.
299 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
301 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
302 delayed branches or jumps.
306 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
308 * dvp-opc.c (vif_operands): Add unpack[u] support.
309 (vif_opcodes): Ditto.
310 (*_vif_imrubits): Renamed from *_vif_imrbits.
312 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
314 * dvp-dis.c (print_insn): Handle word number.
315 Handle mips address vs vu address.
316 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
317 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
318 ({insert,extract}_dma_addr): Fix word ofset.
319 ({insert,print}_gif_regs): Fix encode/decode.
322 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
324 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
326 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
327 * tic30-dis.c (print_branch): Likewise.
329 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
330 * dvp-dis.c (dvp_info_mach_type): New function.
331 (print_insn_dvp): Call it.
332 (print_vif): Return length of 4 if mpg or direct insn so following
333 insns get properly disabled.
334 (print_gif): Fix word order.
335 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
336 (gif_operands): Fix word order.
337 (gif_opcodes): Likewise.
338 ({insert,extract,print}_gif_regs): Likewise.
339 (gif_regs): Add new register number/name changes.
340 (dma_opcodes): Add dmarefe insn.
343 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
345 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
346 saved_symbol code as it is no longer needed.
348 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
350 * cgen-asm.c: Include symcat.h.
351 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
353 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
356 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
358 * dvp-opc.c (extra_dma_flags): Fix typos.
359 (dma_operands): Fix word numbers.
360 (dma_opcodes): Likewise.
361 ({insert,extract}_dma_flags): Likewise.
364 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
366 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
369 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
371 * dvp-dis.c (print_gif): Complete.
372 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
373 (state_gif_{nregs,regs,nloop}): New static locals.
375 (dvp_opcode_init_{parse,print}): Init gif state locals.
376 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
377 (vif_insn_len): Handle `unpack'.
378 ({insert,extract}_dma_flags): Complete.
382 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
384 * mips-opc.c (mula.s): Renamed from multa.s.
387 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
389 * m32r-opc.[ch]: Regenerate.
392 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
394 * dvp-opc.c (dma_operands): Rewrite.
395 (dma_operand_{count,addr}): New globals.
396 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
397 (insert_dma_addr): Insert value into insn.
398 (extract_dma_addr): Extract value from insn.
400 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
402 * dvp-dis.c (print_vu): Handle loi insns.
403 (print_insn): Likewise.
404 * dvp-opc.c (vu_lower_opcodes): Add "loi".
405 (vu_operands): Make LDEST1 a FAKE operand.
406 (parse_dest1): Allow elided argument.
407 (print_dest1): Don't print the argument.
409 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
411 * dvp-opc.c (parse_vfreg): Dest spec is optional.
412 (print_vfreg): Don't print dest spec.
413 (parse_accdest): Dest spec is optional.
414 (print_accdest): Don't print dest spec.
417 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
419 * Makefile.am (CGENFILES): Update.
420 * Makefile.in: Regenerate.
421 * cgen-asm.in (insert_normal): Result is error message now.
422 Validate value to be inserted.
423 (insert_insn_normal): Result is error message now.
424 (@arch@_cgen_assemble_insn): Update.
425 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
426 arguments. Don't perform validation here.
427 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
429 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
431 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
432 operand instance list.
433 * m32r-opc.c: Regenerate.
435 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
437 * Makefile.am (AUTOMAKE_OPTIONS): Define.
438 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
440 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
442 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
444 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
446 * configure.in: Get the version number from BFD.
447 * configure: Rebuild.
449 From H.J. Lu <hjl@gnu.org>:
450 * Makefile.am (libopcodes_la_LDFLAGS): Define.
451 * Makefile.in: Rebuild.
453 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
455 * m32r-opc.c: Regenerate.
456 * m32r-opc.h: Regenerate.
458 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
460 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
461 Ignore ALIAS insns if asked to.
462 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
463 * m32r-opc.c: Regenerate.
466 * dvp.opc.c: Nicely format opcode tables.
467 (vu_operands): New element UFLAGS.
468 (parse_uflags,print_uflags): New functions.
469 (vu_upper_opcodes): Add UFLAGS to all insns.
472 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
474 Fix rac to accept only a0:
475 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
476 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
477 Introduce OPERAND_GPR.
478 * d10v-dis.c (print_operand): Likewise.
480 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
482 * cgen-opc.in: New file.
483 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
484 * Makefile.am (CGENFILES): Add cgen-opc.in.
485 * Makefile.in: Regenerate.
487 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
488 (cgen_hw_lookup): Make result const.
490 * cgen-dis.in (*): Use PTR instead of void *.
491 (print_insn): Delete unused vars `i', `syntax'.
493 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
496 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
498 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
499 (vif_opcodes): Update renamed insns.
500 * dvp-dis.c (*): Likewise.
503 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
505 * configure, aclocal.m4: Rebuild with new libtool.
508 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
510 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
511 instructions use a PC relative branch, not absolute.
514 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
516 * configure.in: Set libtool_enable_shared rather than
517 libtool_shared. Remove diversion hack.
518 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
520 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
522 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
523 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
525 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
527 * tic30-dis.c: New file.
528 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
529 * configure.in: Handle bfd_tic30_arch.
530 * Makefile.am: Rebuild dependencies.
531 (CFILES): Add tic30-dis.c
532 (ALL_MACHINES): Add tic30-dis.lo.
533 * configure, Makefile.in: Rebuild.
536 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
538 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
539 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
540 macwhi-a and macwlo-a instructions.
544 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
546 * dvp-opc.c, fixed encoding of a bunch of instructions to
547 be consistent with the asmvu assembler (and inconsistent
548 with the specification).
550 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
552 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
553 in the opcode table. The pkemscalf instruction must come first.
555 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
557 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
560 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
562 * m32r-opc.h (HAVE_CPU_M32R): Define.
565 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
567 * dvp-dis.c, dvp-opc.c: New files.
568 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
569 * configure: Regenerate.
570 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
571 (dvp-dis.lo,dvp-opc.lo): Add rules for.
572 (mips-dis.lo): Compile with @archdefs@.
573 * Makefile.in: Regenerate.
574 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
575 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
578 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
580 * v850-opc.c (insertion routines): If both alignment and size is
581 wrong then report this.
583 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
585 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
586 Only recognize instructions for the current target_processor.
588 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
590 * d10v-dis.c (PC_MASK): Correct value.
591 (print_operand): If there's a reloc, don't calculate the
592 address because they could be in different sections.
594 start-sanitize-cygnus
595 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
597 * cgen.sh: Rewrite to be like simulator's version.
598 * Makefile.am (cgen): Update call to cgen.sh.
599 * Makefile.in: Regenerate
602 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
604 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
605 instruction after the 4650's "mul" instruction; nobody's using the
606 4010 these days. If object files someday indicate which processor
607 variant they're intended for, we can do a better job at this.
610 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
612 * mips-opc.c (c.lt.s): Add r5900 variant.
616 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
618 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
619 table provided entry size. Use CGEN_INSN_MNEMONIC.
620 (cgen_parse_keyword): Rewrite.
621 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
622 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
623 * cgen-opc.c: Clean up pass over `struct foo' usage.
624 (cgen_keyword_lookup_value): Handle "" entry.
625 (cgen_keyword_add): Likewise.
626 start-sanitize-cygnus
627 * Makefile.am: Add cgen support.
628 * Makefile.in: Regenerate.
629 * configure.in: Add cgen support.
630 * configure: Regenerate.
631 * aclocal.m4: Regenerate.
632 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
635 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
637 * mips-opc.c: Add FP_D to s.d instruction flags.
639 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
641 * m68k-opc.c (halt, pulse): Enable them on the 68060.
644 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
646 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
647 PC relative offset forms before the 15 bit forms. An assembler command
648 line option now chooses the default.
652 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
654 * mips-opc.c: Add many missing r5900 instructions.
658 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
660 * d30v-opc.c (d30v_opcode_table): Set new flags bits
661 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
664 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
666 * configure: Only build libopcodes shared if --enable-shared's value
667 was `yes', or was set to `*opcodes*'.
668 * aclocal.m4: Likewise.
669 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
670 original source of this bit of code. It's not clear what the best fix
674 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
676 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
679 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
681 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
682 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
683 offset forms before the 15 bit forms, to default to the long forms.
686 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
688 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
690 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
692 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
693 symbol if none is present.
694 (print_insn_big_arm): Prevent examination of stored symbol if
697 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
699 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
701 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
703 * disassemble.c: Remove disasm_symaddr() function.
705 * arm-dis.c: Use info->symbol instead of info->flags to determine
706 if disassmbly should be in Thumb or Arm mode.
708 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
710 * arm-dis.c: Add support for disassembling Thumb opcodes.
711 (print_insn_thumb): New function.
713 * disassemble.c (disasm_symaddr): New function.
715 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
716 (thumb_opcodes): Table of Thumb opcodes.
718 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
720 * m68k-opc.c (btst): Change Dd@s to Dd;b.
722 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
723 and 'v' as operand types.
725 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
727 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
728 <olivier.carmona@di.epfl.ch>.
729 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
730 which has a two word opcode with a one word argument.
733 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
735 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
736 unsigned, not signed.
737 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
740 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
742 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
743 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
744 (ftrv): Slay the cut-and-paste monster.
746 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
748 * d10v-dis.c (print_operand):
749 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
751 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
753 * d10v-opc.c (OPERAND_FLAG): Split into:
754 (OPERAND_FFLAG, OPERAND_CFLAG) .
758 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
760 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
761 field for all INSN_MACRO's.
764 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
766 * mips-opc.c (sync,cache): These are 3900 insns.
768 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
770 sh-opc.h (sh_table): Remove ftst/nan.
772 start-sanitize-vr5400
773 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
775 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
776 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
778 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
782 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
784 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
785 Add tx49 insns and configury.
788 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
790 * mips-opc.c (ffc, ffs): Fix mask.
793 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
795 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
799 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
801 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
802 start-sanitize-vr5400
803 Added VR5400 instructions.
804 (N5): New cpu-id macro.
806 (WR_HILO, RD_HILO, MOD_HILO): New macros.
808 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
810 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
811 (WR_HILO, RD_HILO, MOD_HILO): New macros.
813 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
815 * v850-dis.c (disassemble): Replace // with /* ... */
817 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
819 * sparc-opc.c: Add wr & rd for v9a asr's.
820 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
821 (v9a_asr_reg_names): New variable.
822 Patch from David Miller <davem@vger.rutgers.edu>.
824 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
826 * sparc-opc.c (v9notv9a): New insn type.
827 (IMPDEP): Move to the end to not conflict with edge8 et al.
828 Patch from David Miller <davem@vger.rutgers.edu>.
830 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
832 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
834 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
836 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
838 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
840 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
841 of disassemble_info structure to determine if an overlay address
842 has a matching symbol in low memory.
844 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
845 new symbol_at_address_func field in disassemble_info structure.
847 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
849 * v850-opc.c (extract_d22): Use signed arithmatic.
851 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
853 * mips-opc.c: Three op mult is not an ISA insn.
855 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
857 * mips-opc.c: Fix formatting.
859 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
861 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
862 than assuming that char is signed. Explicitly sign extend 16 bit
863 values, rather than assuming that short is 16 bits.
864 (OP_sI, OP_J, OP_DIR): Likewise.
867 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
869 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
873 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
875 * v850-opc.c: Fix typo in comment.
877 * v850-dis.c (disassemble): Add test of processor type when
880 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
882 * configure.in: Use a diversion to set enable_shared before the
883 arguments are parsed.
884 * configure: Rebuild.
886 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
888 * m68k-opc.c (TBL1): Use ! rather than `.
889 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
891 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
893 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
895 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
897 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
900 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
901 * aclocal.m4: Rebuild with new libtool.
902 * configure: Rebuild.
905 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
907 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
910 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
912 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
914 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
916 * v850-opc.c (v850_opcodes): Further rearrangements.
919 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
921 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
924 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
926 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
929 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
931 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
933 * mips16-opc.c: Added mips16 sdbbp.
936 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
938 * v850-opc.c: Initialise processors field of v850_opcode structure.
941 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
943 Merge changes from Martin Hunt:
945 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
947 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
948 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
949 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
951 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
953 * d30v-dis.c (print_insn): First operand of d*i (delayed
954 branch) instructions is relative.
956 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
957 (d30v_operand_table): Add IMM6S3 type.
958 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
960 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
961 and cmp instructions.
963 * d30v-opc.c: Correct entries for repeat*, and sat*.
964 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
965 types. Correct several formats.
967 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
969 * d30v-opc.c (pre_defined_registers): Change control registers.
971 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
972 SHORT_C2. Manual was incorrect.
974 * d30v-dis.c (lookup_opcode): Return value now indicates
975 if an opcode has a short and a long form. Used for deciding
976 to append a ".s" or ".l".
977 (print_insn): Append a ".s" to an instruction if it is
978 the short form and ".l" if it is a long form. Do not append
979 anything if the instruction has only one possible size.
981 * d30v-opc.c: Change mulx2h to require an even register.
982 New form: SHORT_A2; a SHORT_A form that needs an even
983 register as the first operand.
985 * d30v-dis.c (print_insn_d30v): Fix problem where the last
986 instruction was not being disassembled if there were an odd
987 number of instructions.
989 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
993 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
995 * v850-dis.c (disassemble): Improved display of register lists.
998 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1000 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1001 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1002 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1003 fandnot1s, fandnot2s.
1005 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1007 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1009 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1011 * cgen-asm.c (cgen_parse_address): New argument resultp.
1012 All callers updated.
1013 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1015 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1017 * mn10200-dis.c (disassemble): PC relative instructions are
1018 relative to the next instruction, not the current instruction.
1020 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1022 * v850-dis.c (disassemble): Only signed extend values that are not
1023 returned by extract functions.
1024 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1026 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1028 * v850-opc.c: Update comments. Remove use of
1029 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1031 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1033 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1035 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1037 * configure: Rebuilt with latest devo autoconf for NT support.
1039 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1041 * v850-dis.c (disassemble): Use curly brace syntax for register
1044 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1045 where r0 is being used as a destination register.
1047 start-sanitize-v850e
1048 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1050 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1053 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1055 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1056 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1057 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1058 Add insns to access SGR and DBR.
1059 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1061 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1063 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1065 start-sanitize-v850e
1066 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1068 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1069 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1072 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1074 * configure (cgen_files): Add support for v850e target.
1075 * configure.in (cgen_files): Add support for v850e target.
1077 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1079 * configure (cgen_files): Add support for v850ea target.
1080 * configure.in (cgen_files): Add support for v850ea target.
1083 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1085 * configure.in (bfd_arc_arch): Add.
1086 * configure: Rebuild.
1087 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1088 * Makefile.in: Rebuild.
1089 * arc-dis.c, arc-opc.c: New files.
1090 * disassemble.c (ARCH_all): Define ARCH_arc.
1091 (disassembler): Add ARC support.
1093 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1095 start-sanitize-v850e
1096 * v850-dis.c (disassemble): Add support for v850EA instructions.
1098 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1099 (v850_opcodes): Add v850EA instructions.
1101 * v850-dis.c (disassemble): Add support for v850E instructions.
1103 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1104 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1105 insert_spe, extract_spe): New Functions.
1106 (v850_opcodes): Add v850E instructions.
1109 * v850-opc.c: Reorganised and re-layed out to improve readability
1112 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1114 * configure: Rebuild with autoconf 2.12.1.
1116 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1118 * aclocal.m4, configure: Rebuild with new automake patches.
1120 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1122 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1123 * acinclude.m4: Just include acinclude.m4 from BFD.
1124 * aclocal.m4, configure: Rebuild.
1126 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1128 * Makefile.am: New file, based on old Makefile.in.
1129 * acconfig.h: New file.
1130 * acinclude.m4: New file.
1131 * stamp-h.in: New file.
1132 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1133 Removed shared library handling; now handled by libtool. Replace
1134 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1135 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1136 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1137 handling in AC_OUTPUT.
1138 * dep-in.sed: Change .o to .lo.
1139 * Makefile.in: Now built with automake.
1140 * aclocal.m4: Now built with aclocal.
1141 * config.in, configure: Rebuild.
1143 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1145 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1147 start-sanitize-r5900
1148 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1150 * mips-opc.c: Fix coding of mtsa.
1153 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1155 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1157 * sparc-dis.c (sorted_opcodes): New static local.
1158 (struct opcode_hash): `opcode' is pointer to const element.
1159 (build_hash): First arg is now table of sorted pointers.
1160 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1161 (compare_opcodes): Update.
1163 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1165 * cgen-opc.c: #include <ctype.h>.
1166 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1167 Handle case insensitive hashing.
1168 (hash_keyword_value): Change type of `value' to unsigned int.
1170 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1172 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1173 precision FP, mark it as such. Likewise for double precision
1174 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1176 start-sanitize-r5900
1177 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1180 start-sanitize-r5900
1181 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1183 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1184 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1187 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1189 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1191 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1192 nesting depth when all the macros are expanded.
1194 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1196 * sparc-opc.c: The fcmp v9a instructions take an integer register
1197 as a destination, not a floating point register. From Christian
1198 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1200 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1202 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1203 syntax. From Roman Hodek
1204 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1206 * i386-dis.c (twobyte_has_modrm): Fix pand.
1208 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1210 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1212 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1214 * arm-dis.c: Add prototypes for arm_decode_shift and
1217 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1219 * mips-opc.c: Add r3900 insns.
1221 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1223 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1224 print delay slot instructions on the same line. When using a PC
1225 relative load, add a comment with the value being loaded if it can
1228 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1230 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1231 to pushS/popS for segment regs and byte constant so that
1232 pushw/popw printed when in 16 bit data mode.
1234 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1235 print cbtw, cwtd in 16 bit data mode.
1236 * i386-dis.c (putop): extra case W to support above.
1238 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1239 address size prefix in 16 bit address mode.
1241 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1243 * sh-dis.c: Reindent. Rename local variable fprintf to
1246 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1248 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1250 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1252 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1254 * mips16-opc.c (mip16_opcodes): same.
1256 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1258 * m68k-opc.c (moveb): Change $d to %d.
1260 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1262 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1263 (twobyte_has_modrm): Likewise.
1265 (OP_MMX, OP_EM, OP_MS): New static functions.
1267 * i386-dis.c: Revert patch of April 4. The output now matches
1270 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1272 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1275 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1277 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1279 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1281 * Makefile.in (install): Depend upon installdirs.
1282 (installdirs): New target.
1284 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1286 From Thomas Graichen <graichen@rzpd.de>:
1287 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1288 * configure: Rebuild.
1290 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1292 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1293 Delete string{,s}.h support.
1295 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1297 * cgen-asm.c (cgen_parse_operand_fn): New global.
1298 (cgen_parse_{{,un}signed_integer,address}): Update call to
1299 cgen_parse_operand_fn.
1300 (cgen_init_parse_operand): New function.
1301 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1302 from cgen_asm_init_parse.
1303 (m32r_cgen_assemble_insn): New operand `errmsg'.
1304 Delete call to as_bad, return error message to caller.
1305 (m32r_cgen_asm_hash_keywords): #if 0 out.
1307 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1309 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1311 [case 'J']: Fix typo in register name.
1313 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1315 * configure.in: Substitute SHLIB_LIBS.
1316 * configure: Rebuild.
1317 * Makefile.in (SHLIB_LIBS): New variable.
1318 ($(SHLIB)): Use $(SHLIB_LIBS).
1320 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1322 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1324 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1326 * disassemble.c (disassembler): Handle m32r.
1328 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1330 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1331 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1332 * Makefile.in (CFILES): Add them.
1333 (ALL_MACHINES): Add them.
1334 (dependencies): Regenerate.
1335 * configure.in (cgen_files): New variable.
1336 (bfd_m32r_arch): Add entry.
1337 * configure: Regenerate.
1339 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1341 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1342 * configure: Rebuild.
1344 * Makefile.in: Rebuild dependencies.
1346 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1348 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1351 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1353 * Branched binutils 2.8.
1355 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1357 * m10200-dis.c: Rename from mn10200-dis.c.
1358 * m10200-opc.c: Rename from mn10200-opc.c.
1359 * m10300-dis.c: Rename from mn10300-dis.c
1360 * m10300-opc.c: Rename from mn10300-opc.c.
1361 * Makefile.in: Update accordingly.
1363 * mips16-opc.c: Add mul and dmul macros.
1365 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1367 * makefile.vms: Update CFLAGS, add clean target.
1369 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1371 * mips-opc.c: Add "wait". From Ralf Baechle
1372 <ralf@gnu.ai.mit.edu>.
1374 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1375 * configure, config.in: Rebuild.
1376 * sysdep.h: Include <stdlib.h> if it exists.
1377 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1379 * Makefile.in: Rebuild dependencies.
1381 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1383 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1384 Andrew Bray <andy@madhouse.demon.co.uk>.
1386 * mips-opc.c: Add cast when setting mips_opcodes.
1388 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1390 * v850-dis.c (disassemble): Fix sign extension problem.
1391 * v850-opc.c (extract_d*): Fix sign extension problems to make
1392 disassembly calculate branch offsets correctly.
1394 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1396 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1398 * mips-opc.c: Add dctr and dctw.
1401 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1403 * d30v-dis.c (print_insn): Change the way signed constants
1406 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1408 * Makefile.in (BFD_H): New variable.
1409 (HFILES): New variable.
1410 (CFILES): Add all C files.
1411 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1412 Delete old dependencies, and build new ones.
1413 * dep-in.sed: New file.
1415 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1417 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1419 start-sanitize-coldfire
1420 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1422 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1425 end-sanitize-coldfire
1426 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1428 * mn10200-opc.c: Change "trap" to "syscall".
1429 * mn10300-opc.c: Add new "syscall" instruction.
1431 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1433 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1434 mulul insns on the coldfire.
1436 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1438 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1439 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1440 (print_insn_little_arm): Likewise.
1442 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1444 Based on patches from H.J. Lu <hjl@lucon.org>:
1445 * i386-dis.c (fetch_data): Add prototype.
1446 * m68k-dis.c (fetch_data): Add prototype.
1447 (dummy_print_address): Add prototype. Make static.
1448 * ppc-opc.c (valid_bo): Add prototype.
1449 * sparc-dis.c (build_hash_table): Add prototype.
1450 (is_delayed_branch, compute_arch_mask): Add prototypes.
1451 (print_insn_sparc): Make several local variables const.
1452 (compare_opcodes): Change arguments to const PTR. Add prototype.
1453 * sparc-opc.c (arg): Change name field to be const.
1454 (lookup_name, lookup_value): Add prototypes. Change table and
1455 name parameters to be const.
1456 (sparc_encode_asi): Change name parameter to be const.
1457 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1458 (sparc_encode_sparclet_cpreg): Likewise.
1459 (sparc_decode_asi): Change return type to be const.
1460 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1461 (sparc_decode_sparclet_cpreg): Likewise.
1463 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1465 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1466 Solaris doesn't like the combined options, and the -f is
1468 (stamp-tshlink, install): Likewise.
1470 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1472 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1475 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1477 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1479 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1481 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1484 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1486 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1488 start-sanitize-tic80
1489 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1491 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1493 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1495 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1498 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1500 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1501 floatformat_to_double to make portable.
1502 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1505 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1507 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1508 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1510 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1512 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1513 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1515 start-sanitize-tic80
1516 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1518 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1519 (OFF_SL_BR_SCALED): ... to this, and added the flag
1520 TIC80_OPERAND_BASEREL to the flags word.
1521 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1525 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1527 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1528 Change mips_opcodes from const array to a pointer,
1529 and change bfd_mips_num_opcodes from const int to int,
1530 so that we can increase the size of the mips opcodes table
1533 start-sanitize-tic80
1534 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1536 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1537 store BITNUM values in the table in one's complement form
1538 to match behavior when assembler is given a raw numeric
1539 value for a BITNUM operand.
1540 * tic80-dis.c (print_operand_bitnum): Ditto.
1544 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1546 * d30v-opc.c: Removed references to FLAG_X.
1549 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1551 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1554 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1556 * Makefile.in: Added d30v object files.
1557 * configure: (bfd_d30v_arch) Rebuilt.
1558 * configure.in: (bfd_d30v_arch) Added new case.
1559 * d30v-dis.c: New file.
1560 * d30v-opc.c: New file.
1561 * disassemble.c (disassembler) Add entry for d30v.
1564 start-sanitize-tic80
1565 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1567 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1568 representations for the floating point BITNUM values.
1570 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1572 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1573 in the table in one's complement form, as they appear in the
1575 (tic80_symbol_to_value): Use macros to access predefined
1577 (tic80_value_to_symbol): Ditto.
1578 (tic80_next_predefined_symbol): New function.
1579 * tic80-dis.c (print_operand_bitnum): Remove code that did
1580 one's complement for BITNUM values.
1583 start-sanitize-r5900
1584 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1586 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1589 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1591 * makefile.vms: Remove 8 bit characters. Update to latest
1594 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1596 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1598 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1600 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1601 (IMM24_PCREL): Likewise.
1603 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1605 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1606 address for an extended PC relative instruction that is not a
1609 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1611 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1614 start-sanitize-tic80
1615 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1617 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1618 (tic80_opcodes): Sort entries so that long immediate forms
1619 come after short immediate forms, making it easier for
1620 assembler to select the right one for a given operand.
1623 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1625 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1627 (print_insn_mips16): Likewise.
1629 start-sanitize-r5900
1630 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1632 * mips-opc.c: add r5900.
1635 start-sanitize-tic80
1636 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1638 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1639 a symbol class that restricts translation to just that
1640 class (general register, condition code, etc).
1642 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1644 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1645 and REG_DEST_E for register operands that have to be
1646 an even numbered register. Add REG_FPA for operands that
1647 are one of the floating point accumulator registers.
1648 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1649 (tic80_opcodes): Change entries that need even numbered
1650 register operands to use the new operand table entries.
1651 Add "or" entries that are identical to "or.tt" entries.
1654 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1656 * mips16-opc.c: Add new cases of exit instruction for
1658 * mips-dis.c (print_mips16_insn_arg): Display floating point
1659 registers in operands of exit instruction. Print `$' before
1660 register names in operands of entry and exit instructions.
1662 start-sanitize-tic80
1663 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1665 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1666 pairs for all predefined symbols recognized by the assembler.
1667 Also used by the disassembling routines.
1668 (tic80_symbol_to_value): New function.
1669 (tic80_value_to_symbol): New function.
1670 * tic80-dis.c (print_operand_control_register,
1671 print_operand_condition_code, print_operand_bitnum):
1672 Remove private tables and use tic80_value_to_symbol function.
1675 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1677 * d10v-dis.c (print_operand): Change address printing
1678 to correctly handle PC wrapping. Fixes PR11490.
1680 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1682 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1685 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1687 * mips-dis.c (print_insn_mips16): Set insn_info information.
1688 (print_mips16_insn_arg): Likewise.
1690 * mips-dis.c (print_insn_mips16): Better handling of an extend
1691 opcode followed by an instruction which can not be extended.
1693 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1695 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1696 coldfire moveb instruction to not allow an address register as
1697 destination. Although the documentation does not indicate that
1698 this is invalid, experiments uncovered unexpected behavior.
1699 Added a comment explaining the situation. Thanks to Andreas
1700 Schwab for pointing this out to me.
1702 start-sanitize-tic80
1703 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1705 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1706 entries are presorted so that entries with the same mnemonic are
1707 adjacent to each other in the table. Sort the entries for each
1708 instruction so that this is true.
1711 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1713 * m68k-dis.c: Include <libiberty.h>.
1714 (print_insn_m68k): Sort the opcode table on the most significant
1715 nibble of the opcode.
1717 start-sanitize-tic80
1718 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1720 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1721 "vsub", "vst", "xnor", and "xor" instructions.
1722 (V_a1): Renamed from V_a, msb of accumulator reg number.
1723 (V_a0): Add macro, lsb of accumulator reg number.
1725 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1727 * tic80-dis.c (print_insn_tic80): Broke excessively long
1728 function up into several smaller ones and arranged for
1729 the instruction printing function to be callable recursively
1730 to print vector instructions that have both a load and a
1731 math instruction packed into a single opcode.
1732 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1733 to explain why it comes after the other vector opcodes.
1736 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1738 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1739 move insns to handle immediate operands.
1741 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1743 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1744 fix operand mask in the "moveml" entries for the coldfire.
1746 start-sanitize-tic80
1747 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1749 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1750 New macros for building vector instruction opcodes.
1751 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1752 FMT_LI, which were unused. The field is now a flags field.
1753 Remove some opcodes that are possible, but illegal, such
1754 as long immediate instructions with doubles for immediate
1755 values. Add "vadd" and "vld" instructions.
1757 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1759 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1760 the order more logical. Move the shift alias instructions ("rotl",
1761 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1762 interspersed with the regular sr.x and sl.x instructions. Add
1763 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1764 "sub", "subu", "swcr", and "trap".
1766 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1768 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1769 (OFF_SL_PC): Renamed from OFF_SL.
1770 (OFF_SS_BR): New operand type for base relative operand.
1771 (OFF_SL_BR): New operand type for base relative operand.
1772 (REG_BASE): New operand type for base register operand.
1773 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1774 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1775 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1777 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1778 10 char field, padded with spaces on rhs, rather than a string
1779 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1780 than old TIC80_OPERAND_RELATIVE. Add support for new
1781 TIC80_OPERAND_BASEREL flag bit.
1783 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1785 * tic80-dis.c (print_insn_tic80): Print floating point operands
1787 * tic80-opc.c (SPFI): Add single precision floating point
1788 immediate operand type.
1789 (ROTATE): Add rotate operand type for shifts.
1790 (ENDMASK): Add for shifts.
1791 (n): Macro for the 'n' bit.
1792 (i): Macro for the 'i' bit.
1793 (PD): Macro for the 'PD' field.
1794 (P2): Macro for the 'P2' field.
1795 (P1): Macro for the 'P1' field.
1796 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1800 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1802 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1803 adding in current address for pc-relative operands.
1805 start-sanitize-tic80
1806 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1808 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1809 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1810 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1811 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1812 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1813 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1814 (REG_SCALED, LSI_SCALED): New operand types.
1815 (E): New macro for 'E' bit at bit 27.
1816 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1817 opcodes, including the various size flavors (b,h,w,d) for
1818 the direct load and store instructions.
1820 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1822 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1824 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1825 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1826 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1827 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1828 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1829 masks with "MASK_* & ~M_*" to get the M bit reset.
1830 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1832 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1834 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1835 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1836 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1838 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1839 CC, SICR, and LICR table entries.
1840 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1841 "bcnd", and "brcr" opcodes.
1844 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1846 * ppc-opc.c (powerpc_operands): Make comment match the
1847 actual fields (no shift field).
1848 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1849 start-sanitize-tic80
1850 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1851 partial implementation, work in progress.
1852 * tic80-opc.c (tic80_operands): Begin construction operands table.
1853 (tic80_opcodes): Continue populating opcodes table and start
1854 filling in the operand indices.
1855 (tic80_num_opcodes): Add this.
1858 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1860 * m68k-opc.c: Add #B case for moveq.
1862 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1864 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1865 before they are used.
1867 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1869 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1870 for "breakpoint" instruction.
1872 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1874 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1875 (dep): Use ALL_CFLAGS rather than CFLAGS.
1877 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1879 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1882 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1884 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1885 start-sanitize-tic80
1886 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1889 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1891 * mips16-opc.c: Add "abs".
1893 start-sanitize-tic80
1894 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1896 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1897 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1898 (disassembler): Add bfd_arch_tic80 support to set disassemble
1899 to print_insn_tic80.
1900 * tic80-dis.c (print_insn_tic80): Add stub.
1902 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1904 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1905 * configure: Regenerate with autoconf.
1906 * tic80-dis.c: Add file.
1907 * tic80-opc.c: Add file.
1910 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1912 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1914 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1916 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1917 (mn10200_opcodes): Use it for some logicals and btst insns.
1918 Add "break" and "trap" instructions.
1920 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1922 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1924 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1926 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1927 relative load or add now depends upon whether the instruction is
1930 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1932 * mn10200-dis.c: Finish writing disassembler.
1933 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1934 Fix mask for "jmp (an)".
1936 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1937 handle endianness issues for mn10300.
1939 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1941 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1943 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1944 instruction. Fix opcode field for "movb (imm24),dn".
1946 * mn10200-opc.c (mn10200_operands): Fix insertion position
1949 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1951 * mn10200-opc.c: Create mn10200 opcode table.
1952 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1953 but moving along nicely.
1955 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1957 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1959 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1961 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1962 specifiers for fmovem* instructions.
1964 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1966 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1968 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1970 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1973 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1975 * mn10300-opc.c: Add some comments explaining the various
1978 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1980 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1982 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1985 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1986 operand specifiers in fmovm* instructions.
1988 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1990 * ppc-opc.c (insert_li): Give an error if the offset has the two
1991 least significant bits set.
1993 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1995 * mips-dis.c (print_insn_mips16): Separate the instruction from
1996 the arguments with a tab, not a space.
1998 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2000 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2003 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2006 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2008 * configure: Rebuild with autoconf 2.12.
2010 Add support for mips16 (16 bit MIPS implementation):
2011 * mips16-opc.c: New file.
2012 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2013 (mips16_reg_names): New static array.
2014 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2015 after seeing a 16 bit symbol.
2016 (print_insn_little_mips): Likewise.
2017 (print_insn_mips16): New static function.
2018 (print_mips16_insn_arg): New static function.
2019 * mips-opc.c: Add jalx instruction.
2020 * Makefile.in (mips16-opc.o): New target.
2021 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2022 * configure: Rebuild.
2024 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2026 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2027 operand specifiers in *save, *restore and movem* instructions.
2029 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2032 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2033 register operands for immediate arithmetic, not, neg, negx, and
2034 set according to condition instructions.
2036 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2037 specifier of the effective-address operand in immediate forms of
2038 arithmetic instructions. The specifier for the immediate operand
2039 notes how and where the constant will be stored.
2041 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2043 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2046 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2049 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2051 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2053 * mn10300-dis.c (disassemble): Handle register lists.
2055 * mn10300-opc.c: Fix handling of register list operand for
2056 "call", "ret", and "rets" instructions.
2058 * mn10300-dis.c (disassemble): Print PC-relative and memory
2059 addresses symbolically if possible.
2060 * mn10300-opc.c: Distinguish between absolute memory addresses,
2061 pc-relative offsets & random immediates.
2063 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2065 (disassemble): Handle SPLIT and EXTENDED operands.
2067 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2069 * mn10300-dis.c: Rough cut at printing some operands.
2071 * mn10300-dis.c: Start working on disassembler support.
2072 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2074 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2076 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2078 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2080 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2082 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2084 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2085 register argument is calls and jmp instructions.
2087 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2089 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2090 getx operand. Fix opcode for mulqu imm,dn.
2092 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2094 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2095 in MN10300_OPERAND_SPLIT operands for how many bits
2096 appear in the basic insn word. Add IMM32_HIGH24,
2097 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2098 (mn10300_opcodes): Use new operands as needed.
2100 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2101 for bset, bclr, btst instructions.
2102 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2104 * mn10300-opc.c (mn10300_operands): Remove many redundant
2105 operands. Update opcode table as appropriate.
2106 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2107 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2109 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2111 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2112 operands (for indexed load/stores). Fix bitpos for DI
2113 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2114 few instructions that insert immediates/displacements in the
2115 middle of the instruction. Add IMM8E for 8 bit immediate in
2116 the extended part of an instruction.
2117 (mn10300_operands): Use new opcodes as appropriate.
2119 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2121 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2122 sequential so the assembler never parallelizes it with
2125 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2127 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2128 a data/address register that appears in register field 0
2129 and register field 1.
2130 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2132 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2134 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2135 standard disassembly.
2137 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2138 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2139 Recategorize PALcode instructions.
2141 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2143 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2145 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2147 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2148 there are no operand types.
2150 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2152 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2154 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2156 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2158 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2160 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2162 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2163 and sst.w instructions.
2165 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2168 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2170 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2173 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2175 * ppc-opc.c (PPCPWR2): Define.
2176 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2179 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2181 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2182 field for movhu instruction.
2184 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2185 cast value to "long" not "signed long" to keep hpux10
2188 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2190 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2193 * mn10300-opc.c (FMT*): Remove definitions.
2195 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2196 for shift-by-register opcodes.
2198 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2199 into [AD][MN][01] for encoding the position of the register
2202 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2204 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2205 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2207 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2209 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2210 Fix various typos. Add "PAREN" operand.
2211 (MEM, MEM2): Define.
2212 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2213 operands. Fix several typos.
2215 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2218 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2220 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2221 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2223 (mn10300_opcodes): Break opcode format out into its own field.
2224 Update many operand fields to deal with signed vs unsigned
2225 issues. Fix one or two typos in the "mov" instruction
2226 opcode, mask and/or operand fields.
2228 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2230 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2231 m68851 wasn't reset.
2233 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2235 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2236 all opcodes. Very rough cut at operands for all opcodes.
2238 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2241 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2243 * mn10200-opc.c, mn10300-opc.c: New files.
2244 * mn10200-dis.c, mn10300-dis.c: New files.
2245 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2246 * disassemble.c: Break mn10x00 support into 10200 and 10300
2248 * configure.in: Likewise.
2249 * configure: Rebuilt.
2251 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2253 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2255 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2257 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2259 * disassemble (ARCH_mn10x00): Define.
2260 (disassembler): Handle bfd_arch_mn10x00.
2261 * configure.in: Recognize bfd_mn10x00_arch.
2262 * configure: Rebuilt.
2264 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2266 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2267 accordingly. Don't declare functions using op_rtn.
2269 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2271 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2272 params to be more standard.
2273 * (disassemble): Print absolute addresses and symbolic names for
2274 branch and jump targets.
2275 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2277 * (v850_opcodes): Add breakpoint insn.
2279 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2281 * m68k-opc.c: Move the fmovemx data register cases before the
2282 other cases, so that they get recognized before the data register
2283 does gets treated as a degenerate register list.
2285 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2287 * mips-opc.c: Add a case for "div" and "divu" with two registers
2288 and a destination of $0.
2290 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2292 * mips-dis.c (print_insn_arg): Add prototype.
2293 (_print_insn_mips): Ditto.
2295 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2297 * mips-dis.c (print_insn_arg): Print condition code registers as
2300 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2302 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2304 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2306 * v850-dis.c (disassemble): Make static. Provide prototype.
2308 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2310 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2313 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2315 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2316 ']' characters into the output stream.
2317 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2318 Add "memop" field to all opcodes (for the disassembler).
2319 Reorder opcodes so that "nop" comes before "mov" and "jr"
2320 comes before "jarl".
2322 * v850-dis.c (print_insn_v850): Fix typo in last change.
2324 * v850-dis.c (print_insn_v850): Properly handle disassembling
2325 a two byte insn at the end of a memory region when the memory
2326 region's size is only two byte aligned.
2328 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2330 * v850-dis.c (v850_reg_names): Define.
2331 (v850_sreg_names, v850_cc_names): Likewise.
2332 (disassemble): Very rough cut at printing operands (unformatted).
2334 * v850-opc.c (BOP_MASK): Fix.
2335 (v850_opcodes): Fix mask for jarl and jr.
2337 * v850-dis.c: New file. Skeleton for disassembler support.
2338 * Makefile.in Remove v850 references, they're not needed here.
2339 * configure.in: Add v850-dis.o when building v850 toolchains.
2340 * configure: Rebuilt.
2341 * disassemble.c (disassembler): Call v850 disassembler.
2343 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2344 (insert_d8_6, extract_d8_6): New functions.
2345 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2346 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2348 (IF4A, IF4B): Use "D7" instead of "D7S".
2349 (IF4C, IF4D): Use "D8_7" instead of "D8".
2350 (IF4E, IF4F): New. Use "D8_6".
2351 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2352 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2354 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2355 (v850_operands): Change D16 to D16_15, use special insert/extract
2356 routines. New new D16 that uses the generic insert/extract code.
2357 (IF7A, IF7B): Use D16_15.
2358 (IF7C, IF7D): New. Use D16.
2359 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2361 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2362 message. Issue an error if the branch offset is odd.
2364 * v850-opc.c: Add notes about needing special insert/extract
2365 for all the load/store insns, except "ld.b" and "st.b".
2367 * v850-opc.c (insert_d22, extract_d22): New functions.
2368 (v850_operands): Use insert_d22 and extract_d22 for
2370 (insert_d9): Fix range check.
2372 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2374 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2375 and set bits field to D9 and D22 operands.
2377 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2379 * v850-opc.c (v850_operands): Define SR2 operand.
2380 (v850_opcodes): "ldsr" uses R1,SR2.
2382 * v850-opc.c (v850_opcodes): Fix opcode specs for
2383 sld.w, sst.b, sst.h, sst.w, and nop.
2385 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2387 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2388 end of the opcode table.
2390 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2392 * d10v-opc.c (pre_defined_registers): Added register pairs,
2393 "r0-r1", "r2-r3", etc.
2395 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2397 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2398 Create I16U for an unsigned 16bit mmediate operand.
2399 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2401 * v850-opc.c (v850_operands): Define EP operand.
2402 (IF4A, IF4B, IF4C, IF4D): Use EP.
2404 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2405 with immediate operand, "movhi". Tweak "ldsr".
2407 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2408 correct. Get sld.[bhw] and sst.[bhw] closer.
2410 * v850-opc.c (v850_operands): "not" is a two byte insn
2412 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2414 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2416 * v850-opc.c (two): Get order of words correct.
2418 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2420 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2421 register source and destination operands.
2422 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2424 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2425 same thinko in "trap" opcode.
2427 * v850-opc.c (v850_opcodes): Add initializer for size field
2430 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2431 Add D8 for 8-bit unsigned field in short load/store insns.
2432 (IF4A, IF4D): These both need two registers.
2433 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2434 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2435 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2436 for "ldsr" and "stsr".
2437 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2440 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2441 short store word (sst.w).
2443 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2445 * v850-opc.c (v850_operands): Added insert and extract fields,
2446 pointers to functions that handle unusual operand encodings.
2448 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2450 * v850-opc.c (v850_opcodes): Enable "trap".
2452 * v850-opc.c (v850_opcodes): Fix order of displacement
2453 and register for "set1", "clr1", "not1", and "tst1".
2455 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2457 * v850-opc.c (v850_operands): Add "B3" support.
2458 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2461 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2463 * v850-opc.c: Close unterminated comment.
2465 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2467 * v850-opc.c (v850_operands): Add flags field.
2468 (v850_opcodes): add move opcodes.
2470 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2472 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2473 * configure: (bfd_v850v_arch) Add new case.
2474 * configure.in: (bfd_v850_arch) Add new case.
2475 * v850-opc.c: New file.
2477 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2479 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2481 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2483 * d10v-opc.c: Add additional information to the opcode
2484 table to help determinine which instructions can be done
2487 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2489 * mpw-make.sed: Update editing of include pathnames to be
2492 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2494 * arm-opc.h: Added "bx" instruction definition.
2496 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2498 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2500 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2502 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2504 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2506 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2508 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2510 * makefile.vms: Update for alpha-opc changes.
2512 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2514 * i386-dis.c (print_insn_i386): Actually return the correct value.
2515 (ONE, OP_ONE): #ifdef out; not used.
2517 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2519 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2520 Changed subi operand type to treat 0 as 16.
2522 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2524 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2527 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2529 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2530 memory transfer instructions. Add new format string entries %h and %s.
2531 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2534 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2536 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2537 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2539 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2541 * alpha-dis.c (print_insn_alpha_osf): Remove.
2542 (print_insn_alpha_vms): Remove.
2543 (print_insn_alpha): Make globally visible. Chose the register
2544 names based on info->flavour.
2545 * disassemble.c: Always return print_insn_alpha for the alpha.
2547 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2549 * d10v-dis.c (dis_long): Handle unknown opcodes.
2551 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2553 * d10v-opc.c: Changes to support signed and unsigned numbers.
2554 All instructions with the same name that have long and short forms
2555 now end in ".l" or ".s". Divs added.
2556 * d10v-dis.c: Changes to support signed and unsigned numbers.
2558 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2560 * d10v-dis.c: Change all functions to use info->print_address_func.
2562 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2564 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2565 move ccr/sr insns more strict so that the disassembler only
2566 selects them when the addressing mode is data register.
2568 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2569 * d10v-opc.c (pre_defined_registers): Declare.
2570 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2571 to pick a better name for the registers.
2573 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2575 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2576 operands for fexpand and fpmerge. From Christian Kuehnke
2577 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2579 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2581 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2582 print routine. Take new regnames and cpumask arguments.
2583 Kill the environment variable nonsense.
2584 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2585 (print_insn_alpha_vms): New function. Do VMS style regnames.
2586 * disassemble.c (disassembler): Test bfd flavour to pick
2587 between OSF and VMS routines. Default to OSF.
2589 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2591 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2592 * configure: Rebuild.
2593 * Makefile.in (install): Use @INSTALL_SHLIB@.
2595 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2597 * configure: (bfd_d10v_arch) Add new case.
2598 * configure.in: (bfd_d10v_arch) Add new case.
2599 * d10v-dis.c: New file.
2600 * d10v-opc.c: New file.
2601 * disassemble.c (disassembler) Add entry for d10v.
2603 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2605 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2606 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2608 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2610 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2611 distinguish between variants of the instruction set.
2612 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2613 distinguish between variants of the instruction set.
2615 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2617 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2618 the 8086 instruction set.
2619 * i386-dis.c: General cleanups. Make most things static. Add
2620 prototypes. Get rid of static variables aflags and dflags. Pass
2621 them as args (to almost everything).
2623 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2625 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2627 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2629 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2630 if the next arg is marked with SRC_IN_DST. Gross.
2632 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2633 we're looking for and find EXR.
2635 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2636 if we're looking for KBIT and we don't find it.
2638 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2641 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2642 3bit immediate operands.
2644 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2646 * Released binutils 2.7.
2648 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2649 <kkaempf@progis.ac-net.de>.
2651 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2653 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2655 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2657 * sparc-dis.c (print_insn_sparclite): New routine to print
2658 sparclite instructions.
2660 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2662 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2664 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2666 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2667 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2668 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2670 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2672 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2673 Use autoconf-set values.
2674 (docdir, oldincludedir): Removed.
2675 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2677 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2679 * alpha-opc.c: New file.
2680 * alpha-opc.h: Remove.
2681 * alpha-dis.c: Complete rewrite to use new opcode table.
2682 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2683 * configure: Rebuild with autoconf 2.10.
2684 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2685 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2687 (alpha-opc.o): New target.
2689 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2691 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2692 Set imm_added_to_rs1 even if the source and destination register
2695 * sparc-opc.c: Add some two operand forms of the wr instruction.
2697 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2699 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2702 * disassemble.c (disassembler): Handle H8/S.
2703 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2705 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2707 * sparc-opc.c: Add beq/teq as aliases for be/te.
2709 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2710 <sergei@msil.sps.mot.com>.
2712 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2714 * makefile.vms: New file.
2716 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2718 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2720 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2723 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2725 * i386-dis.c (OP_OFF): Call append_prefix.
2727 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2729 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2730 unsigned long to silence a warning from the Solaris PowerPC
2733 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2735 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2737 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2739 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2741 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2742 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2743 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2744 cpush, cpusha, cpull sparclet insns.
2746 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2748 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2750 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2752 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2753 Set F_FLOAT on other floating point instructions.
2755 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2757 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2759 (powerpc_opcodes): Add 860/821 specific SPRs.
2761 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2763 * configure.in: Permit --enable-shared to specify a list of
2764 directories. Set and substitute BFD_PICLIST.
2765 * configure: Rebuild.
2766 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2767 uses. Set to @BFD_PICLIST@.
2769 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2771 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2772 not "abs", which may be needed for the absolute in something
2773 like btst #0,@10:8. Print L_3 immediates separately from other
2774 immediates. Change ABSMOV reference to ABS8MEM.
2776 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2778 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2779 (current_arch_mask): New static global.
2780 (compute_arch_mask): New static function.
2781 (print_insn_sparc): Delete sparc_v9_p. New static local
2782 current_mach. Resort opcode table if current_mach changes.
2783 Generalize "insn not supported" test.
2784 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2785 Delete test for v9/!v9.
2786 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2788 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2789 (brfcx): Renamed to FBRX.
2790 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2791 coprocessor mnemonics are not supported on the sparclet).
2792 (condf): Renamed to CONDF.
2793 (SLCBCC2): Delete F_ALIAS flag.
2795 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2797 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2798 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2800 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2802 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2803 that the shared library version number is set correctly.
2805 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2807 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2808 Miles Bader <miles@gnu.ai.mit.edu>.
2809 * configure: Rebuild.
2811 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2813 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2816 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2818 * configure: Rebuild with autoconf 2.8.
2820 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2822 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2823 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2825 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2827 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2828 since they appear as targets in Makefile.in.
2829 * configure: Rebuild.
2831 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2833 * mpw-make.sed: Edit out shared library support bits.
2835 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2837 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2838 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2839 (sparc_opcodes): Add sparclet insns.
2840 (sparclet_cpreg_table): New static local.
2841 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2842 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2844 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2846 * i386-dis.c (index16): New static variable.
2847 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2849 (OP_indirE): Return result of OP_E.
2850 (OP_E): Check for 16 bit addressing mode, and disassemble
2851 correctly. Optimised 32 bit case a little. Don't print
2852 "(base,index,scale)" when sib specifies only an offset.
2854 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2856 * configure.in: Set and substitute SHLIB_DEP.
2857 * configure: Rebuild.
2858 * Makefile.in (SHLIB_DEP): New variable.
2859 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2860 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2861 COMMON_SHLIB, add them to piclist with appropriate modifications.
2862 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2863 here: just use piclist.
2865 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2867 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2868 (print_insn_sparc): Rewrite v9/not-v9 tests.
2869 (compare_opcodes): Likewise.
2870 * sparc-opc.c (MASK_<ARCH>): Define.
2871 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2872 (sparclet,v6notv9): Define.
2873 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2874 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2876 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2878 * configure.in: Call AC_PROG_CC before configure.host.
2879 * configure: Rebuild.
2881 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2883 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2885 * i386-dis.c (onebyte_has_modrm): New static array.
2886 (twobyte_has_modrm): New static array.
2887 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2889 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2891 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2894 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2896 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2899 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2901 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2902 m68010up, not just m68020up | cpu32.
2904 * Makefile.in (SONAME): New variable.
2905 ($(SHLINK)): Make a link to the transformed name, as well.
2906 (stamp-tshlink): New target.
2907 (install): Skip stamp-tshlink during install.
2909 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2911 * configure.in: Call AC_ARG_PROGRAM.
2912 * configure: Rebuild.
2913 * Makefile.in (program_transform_name): New variable.
2914 (install): Transform library name before installing it.
2916 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2918 * i960-dis.c (mem): Add HX dcinva instruction.
2920 Support for building as a shared library, based on patches from
2921 Alan Modra <alan@spri.levels.unisa.edu.au>:
2922 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2923 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2924 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2925 * configure: Rebuild.
2926 * Makefile.in (ALLLIBS): New variable.
2927 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2928 (COMMON_SHLIB, SHLINK): New variables.
2929 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2930 (STAGESTUFF): Remove variable.
2931 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2932 (stamp-piclist, piclist): New targets.
2933 ($(SHLIB), $(SHLINK)): New targets.
2934 ($(OFILES)): Depend upon stamp-picdir.
2935 (disassemble.o): Build twice if PICFLAG is set.
2936 (MOSTLYCLEAN): Add pic/*.o.
2937 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2938 (distclean): Remove pic and stamp-picdir.
2939 (install): Install shared libraries.
2940 (stamp-picdir): New target.
2942 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2944 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2945 Print unknown instruction as "unknown", rather than in hex.
2947 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2949 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2951 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2953 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2955 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2957 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2958 when necessary. From Ulrich Drepper
2959 <drepper@myware.rz.uni-karlsruhe.de>.
2961 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2963 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2964 sparc_num_opcodes. Update architecture enum values.
2965 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2966 (sparc_opcode_lookup_arch): New function.
2967 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2968 (sparc_opcodes): Add v9a shutdown insn.
2970 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2972 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2973 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2975 (print_insn_sparc64): Deleted.
2976 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2979 * sparc-opc.c (architecture_pname): Add v9a.
2981 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2983 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2984 incorrectly defined as 0x16 when it should be 0x15.
2985 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2986 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2987 excb (exception barrier) which is defined in the Alpha
2988 Architecture Handbook version 2.
2989 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2990 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2991 disassembled as or, for example.
2993 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2995 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2996 (_print_insn_mips): Change i from int to unsigned int.
2998 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3000 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3001 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3003 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3005 * i386-dis.c: Added Pentium Pro instructions.
3007 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3009 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3012 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3014 * sh-opc.h (sh_nibble_type): Added REG_B.
3015 (sh_arg_type): Added A_REG_B.
3016 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3018 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3020 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3022 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3024 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3026 * Makefile.in (distclean): Remove stamp-h. From Ronald
3027 F. Guilmette <rfg@monkeys.com>.
3029 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3031 From David Mosberger-Tang <davidm@azstarnet.com>:
3032 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3035 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3037 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3038 (sh_table): Added many SH3 opcodes.
3039 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3041 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3043 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3044 (subco,subco.): Mark this PPC, not PPCCOM.
3046 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3048 * configure: Rebuild with autoconf 2.7.
3050 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3052 * configure: Rebuild with autoconf 2.6.
3054 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3056 * configure.in: Sort list of architectures. Accept but do nothing
3057 for alliant, convex, pyramid, romp, and tahoe.
3059 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3061 * a29k-dis.c (print_special): Change num to unsigned int.
3063 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3065 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3068 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3070 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3071 * configure: Rebuilt.
3073 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3075 * configure.in: Add case for bfd_i860_arch.
3076 * configure: Rebuild.
3078 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3080 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3081 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3082 (NEXTDOUBLE): Likewise.
3083 (print_insn_m68k): Don't match fmoveml if there is more than one
3084 register in the list.
3085 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3087 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3089 * m68k-opc.c: Use #W rather than #w.
3090 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3092 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3094 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3095 and likewise for all the dbxx opcodes.
3097 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3099 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3101 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3103 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3104 the VR4100 specific instructions to the mips_opcodes structure.
3106 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3108 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3109 ugly Metrowerks bug in CW6, is fixed in CW7.
3111 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3113 * ppc-opc.c (whole file): Add flags for common/any support.
3115 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3117 * Makefile.in (BISON): Remove macro.
3118 (FLAGS_TO_PASS): Remove BISON.
3120 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3122 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3124 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3125 instructions that take no args by looking at the match mask.
3126 (print_insn_arg): Always print "%" before register names.
3127 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3128 [case '_']: Don't print "@#" before address.
3129 [case 'J']: Use "%s" as format string, not register name.
3130 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3132 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3134 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3137 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3139 From David Mosberger-Tang <davidm@azstarnet.com>
3141 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3142 (alpha_insn_set): added definitions for VAX floating point
3143 instructions (Unix compilers don't generate these, but handcoded
3144 assembly might still use them).
3146 * alpha-dis.c (print_insn_alpha): added support for disassembling
3147 the miscellaneous instructions in the Alpha instruction set.
3149 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3151 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3152 no longer create sysdep.h, sed ppc-opc.c to work around a
3153 serious Metrowerks C bug.
3154 * mpw-make.in: Remove.
3155 * mpw-make.sed: New file, used by mpw-configure to edit
3156 Makefile.in into an MPW makefile.
3158 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3160 * Makefile.in (maintainer-clean): New synonym for realclean.
3162 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3164 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3165 which use '0', '1', and '2' instead. Specify the proper size for
3166 a pmove immediate operand. Correct the pmovefd patterns to be
3167 moves to a register, not from a register.
3168 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3170 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3172 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3173 %psr, %wim, %tbr as F_NOTV9.
3175 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3177 * Makefile.in (Makefile): Just rebuild Makefile when running
3179 (config.h, stamp-h): New targets.
3180 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3181 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3182 rebuilding config.h.
3183 * configure: Rebuild.
3185 * mips-opc.c: Change unaligned loads and stores with "t,A"
3186 operands to use "t,A(b)".
3188 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3190 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3192 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3194 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3195 until 3 instead of until 2.
3197 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3199 * Makefile.in (ALL_CFLAGS): Define.
3200 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3201 (MOSTLYCLEAN): Add config.log.
3202 (distclean): Don't remove config.log.
3203 * configure.in: Substitute HDEFINES.
3204 * configure: Rebuild.
3206 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3208 * sh-opc.h (sh_arg_type): Add F_FR0.
3209 (sh_table, case fmac): Add F_FR0 as first argument.
3211 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3213 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3215 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3217 * sparc-dis.c: Remove all references to NO_V9.
3219 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3221 * aclocal.m4: Just include ../bfd/aclocal.m4.
3222 * configure: Rebuild.
3224 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3226 * sparc-dis.c (X_DISP19): Define.
3227 (print_insn, case 'G'): Use it.
3228 (print_insn, case 'L'): Sign extend displacement.
3230 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3232 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3233 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3234 host_makefile_frag or frags.
3235 * aclocal.m4: New file.
3236 * configure: Rebuild.
3237 * Makefile.in (INSTALL): Set to @INSTALL@.
3238 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3239 (INSTALL_DATA): Set to @INSTALL_DATA@.
3241 (AR_FLAGS): Set to rc rather than qc.
3242 (CC): Define as @CC@.
3243 (CFLAGS): Set to @CFLAGS@.
3244 (@host_makefile_frag@): Remove.
3245 (config.status): Remove dependency upon @frags@.
3247 * configure.in: ../bfd/config.bfd now just sets shell variables.
3248 Use them rather than looking through target Makefile fragments.
3249 * configure: Rebuild.
3251 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3253 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3255 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3257 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3258 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3261 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3262 (lookup_{name,value}): New functions.
3263 (prefetch_table): New static local.
3264 (sparc_{encode,decode}_prefetch): New functions.
3265 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3267 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3269 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3272 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3274 * sh-dis.c: Correct comment on first line of file.
3276 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3278 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3280 * sparc-opc.c (asi, membar): New static locals.
3281 (sparc_{encode,decode}_{asi,membar}): New functions.
3282 (sparc_opcodes, membar insn): Fix.
3283 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3284 Support decoding of membar masks.
3287 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3289 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3291 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3293 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3294 and likewise for the other branches. Add bhs as an alias for bcc,
3295 and likewise for the size variants. Add dbhs as an alias for
3298 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3300 * sh-opc.h (FP sts instructions): Update to match reality.
3302 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3304 * m68k-dis.c: (fpcr_names): Add % before all register names.
3305 (reg_names): Likewise.
3306 (print_insn_arg): Don't explicitly print % before register names.
3307 Add % before register names in static array names. In case 'r',
3308 print data registers as `@(Dn)', not `Dn@'. When printing a
3309 memory address, don't print @# before it.
3310 (print_indexed): Change base_disp and outer_disp from int to
3311 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3312 syntax. Sign extend 8 byte displacement correctly.
3313 (print_base): Print using MIT syntax. Print zpc when appropriate.
3314 Change parameter disp from int to bfd_vma.
3316 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3319 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3321 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3322 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3323 * sh-opc.h (sh_arg_type): Add new operand types.
3324 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3326 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3328 * Makefile.in (distclean): Remove generated file config.h.
3330 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3332 * Makefile.in (distclean): Remove generated file config.h.
3334 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3336 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3338 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3340 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3341 rather than numopcodes. Use m68k_opcodes rather than removed
3342 opcode function. Don't check F_ALIAS.
3343 (print_insn_arg): Change first parameter to be const char *.
3344 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3345 (m68k-opc.o): New target.
3346 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3347 * configure: Rebuild.
3349 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3351 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3352 (opcode_bits, opcode_hash_table): New variables.
3353 (opcodes_initialized): Renamed from opcodes_sorted.
3354 (build_hash_table): New function.
3355 (is_delayed_branch): Use hash table.
3356 (print_insn): Renamed from print_insn_sparc, made static.
3357 Build and use hash table. If !sparc64, ignore sparc64 insns,
3358 and vice-versa if sparc64.
3359 (print_insn_sparc, print_insn_sparc64): New functions.
3360 (compare_opcodes): Move sparc64 opcodes to end.
3361 Print commutative insns with constant second.
3362 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3364 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3366 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3367 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3368 avoids printing a delay slot in a delay slot.
3369 * sh-opc.h (sh_table): Fully bracket last entry.
3371 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3373 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3375 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3377 * configure.in: Get host_makefile_frag from ${srcdir}.
3379 * configure.in: Autoconfiscated. Check for string[s].h. Create
3380 config.h from config.in. Don't set up sysdep.h link.
3381 * sysdep.h: New file.
3382 * configure, config.in: New files, generated from configure.in.
3383 * Makefile.in: Updated to be processed autoconf-style.
3384 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3385 (Makefile): Depend on config.status.
3386 (config.status): New rule.
3387 * configure.bat: Update Makefile substitutions.
3389 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3391 * mips-opc.c (L1): Define.
3392 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3393 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3396 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3398 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3399 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3400 have multiple add units but only a single logical unit.
3402 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3403 shifted by 18, without any insertion or extraction function.
3404 (insert_cr, extract_cr): Remove.
3406 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3408 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3411 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3413 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3414 * sh-opc.h: Add copyright.
3416 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3418 * Makefile.in (crunch-m68k): Delete extra target accidentally
3419 checked in a while ago.
3421 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3423 * sh-opc.h (sh_table): Add SH3 support.
3425 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3427 * sh-opc.h: Added bsrf and braf.
3429 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3431 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3432 bogus [ls]fm{ea,fd} patterns.
3434 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3435 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3436 initialize it from memory. Make function static.
3437 (print_insn_{big,little}_arm): New functions.
3438 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3439 the correct endianness.
3441 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3443 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3446 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3448 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3449 17th, so that it builds again using GCC as the compiler.
3451 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3453 * mips-dis.c (print_insn_little_mips): Cast return value from
3454 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3455 expects an unsigned long, and that might be fewer words of
3456 argument storage (e.g., if bfd_vma is long long on a 32-bit
3458 (print_insn_big_mips): Likewise with bfd_getb32 value.
3459 (_print_insn_mips): Now static.
3461 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3463 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3464 gcc memory hog problem with initializer is fixed.
3466 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3468 Merge in support for Mac MPW as a host.
3469 (Old change descriptions retained for informational value.)
3471 * mpw-config.in (archname): Compute from the config.
3472 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3474 * mpw-config.in (target_arch): Compute from canonical target.
3475 (m68k, mips, powerpc, sparc): Add architectures.
3476 * mpw-make.in (disassemble.c.o): Add.
3477 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3479 * mpw-config.in (BFD_MACHINES): Set to a default value.
3480 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3482 * mpw-make.in (CSEARCH): Add extra-include to search path.
3484 * mpw-config.in (varargs.h): Don't create.
3485 (sysdep.h): Create using forward-include.
3486 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3488 * mpw-config.in: New file, MPW version of configure.in.
3489 * mpw-make.in: New file, MPW version of Makefile.in.
3491 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3493 * alpha-dis.c (print_insn_alpha): Put empty statement after
3496 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3498 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3499 (low_sign_extend): Likewise.
3500 (get_field): Delete unused function.
3501 (set_field, deposit_14, deposit_21): Likewise.
3503 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3505 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3508 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3510 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3512 * alpha-opc.h (OSF_ASMCODE): define
3513 print pal-code names as defined in App C of the
3514 Alpha Architecture Reference Manual
3516 * alpha-dis.c: cleaned up output
3517 print stylized code forms as defined in App A.4.3 of the
3518 Alpha Architecture Reference Manual
3520 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3522 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3524 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3527 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3529 * m68k-dis.c (opcode): New function. Returns address of opcode
3530 table entry given index, even if the opcode table was split to
3531 work around gcc bugs.
3532 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3534 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3535 (reg_names): Now const.
3536 (print_insn_arg): Arrays cacheFieldName and names now const.
3537 (print_indexed): Array scales now const.
3539 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3541 * ppc-opc.c: Sort recently added instructions by minor opcode
3542 number within major opcode number.
3544 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3546 * hppa-dis.c: Include libhppa.h.
3548 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3550 * mips-opc.c: Change dli to use M_DLI, and add dla.
3552 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3554 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3556 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3558 * mips-opc.c: Add r4650 mul instruction.
3560 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3562 * mips-opc.c: Add uld and usd macros for unaligned double load and
3565 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3567 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3568 mfdcr, mtdcr, icbt, iccci.
3570 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3572 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3573 signed char fields to shorts, more portable.
3575 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3577 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3578 char fields as signed chars, since they may have negative values.
3580 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3582 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3583 (mycroft@netbsd.org).
3585 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3587 From "Logg, Ed" <elogg@ea.com>:
3588 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3589 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3592 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3594 * ppc-opc.c: Changes based on patch from David Edelsohn
3595 <edelsohn@mhpcc.edu>.
3596 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3599 (insert_tbr): New static function.
3600 (extract_tbr): New static function.
3601 (XFXFXM_MASK, XFXM): Define.
3602 (XSPRBAT_MASK, XSPRG_MASK): Define.
3603 (powerpc_opcodes): Add instructions to access special registers by
3604 name. Add mtcr and mftbu.
3606 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3608 * mips-opc.c (P3): Define.
3609 (mips_opcodes): Add mad and madu.
3611 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3613 * configure.in: Add W65 support.
3614 * disassemble.c: Likewise.
3615 * w65-opc.h, w65-dis.c: New files.
3617 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3619 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3622 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3624 * mips-opc.c: Add dli as a synonym for li.
3626 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3628 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3629 print something for reserved opcode values, even if it won't
3632 * mips-dis.c (_print_insn_mips): When initializing, shift right
3633 and mask, to avoid sign extension problems on the Alpha.
3635 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3638 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3640 * sh-opc.h (mov.l gbr): Get direction right.
3641 * sh-dis.c (print_insn_shx): New function.
3642 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3643 print opcodes with right byte order.
3645 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3647 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3648 to avoid conflicts with getopt.
3650 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3652 * hppa-dis.c (print_insn_hppa): Read the instruction using
3653 bfd_getb32, so that it works on a little endian or 64 bit host.
3654 Remove unused local variable op.
3656 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3658 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3659 addu does not work correctly if -mips3.
3661 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3663 * a29k-dis.c (print_special): Add special register names defined
3664 on 29030, 29040 and 29050.
3665 (print_insn): Handle new operand type 'I'.
3667 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3669 * Makefile.in (INSTALL): Use top level install.sh script.
3671 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3673 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3674 that it works on a little endian host.
3676 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3678 * configure.in: Use ${config_shell} when running config.bfd.
3680 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3682 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3684 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3686 * a29k-dis.c (print_insn): Print the opcode.
3688 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3690 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3692 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3694 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3696 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3698 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3699 which store a value into memory.
3701 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3703 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3704 * arm-dis.c, arm-opc.h: New files.
3706 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3708 * Makefile.in (ns32k-dis.o): Add dependency.
3709 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3710 string, not as array of chars.
3712 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3714 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3716 * sparc-opc.c: Added sparclite extended FP operations, and
3717 versions of v9 impdep* instructions permitting specification of
3720 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3722 * i960-dis.c (reg_names): Now const.
3723 (struct sparse_tabent): New type, copied from array type in mem
3725 (ctrl): Local static array ctrl_tab now const.
3726 (cobr): Local static array cobr_tab now const.
3727 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3728 static variable mem_tab no longer explicitly initialized. Changed
3729 mem_init to const array of struct sparse_tabent.
3730 (reg): Local static variable reg_tab no longer explicitly
3731 initialized. Changed reg_init to const array of struct
3733 (ea): Local static array scale_tab now const.
3735 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3738 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3740 * configure.bat: the disassember needs to be enabled for
3741 "objdump -d" to work in djgpp.
3743 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3745 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3746 (invalid_float): Enabled general version, doesn't require running
3747 on ns32k host. Changed to take char* argument, and test for
3748 explicitly specified sizes, instead of using sizeof() on host CPU
3750 (INVALID_FLOAT): Cast first argument.
3751 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3752 list_P032, list_M032): Now const.
3753 (optlist, list_search): Made appropriate arguments now point to
3755 (print_insn_arg): Changed static array of one-character-string
3756 pointers into a static const array of characters; fixed sprintf
3757 statement accordingly.
3759 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3761 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3762 from distribution. A ns32k-dis.c from a previous distribution has
3763 been brought up to date and supports the new interface.
3765 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3767 * configure.in: add bfd_ns32k_arch target support.
3769 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3770 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3772 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3774 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3777 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3779 * h8300-dis.c, mips-dis.c: Don't use true and false.
3781 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3783 * configure.in: Change --with-targets to --enable-targets.
3785 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3787 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3788 opcodes to the first instruction with that opcode, to speed
3789 disassembly of large files. From ralphc@pyramid.com (Ralph
3792 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3794 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3796 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3798 * configure.bat: update to latest makefile.in
3800 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3802 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3803 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3804 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3805 slot insn is in a delay slot.
3806 * z8k-opc.h: (resflg): Fix patterns.
3807 * h8500-opc.h Fix CR insn patterns.
3809 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3811 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3812 "cmpl" before POWER versions, so that gas -many uses them.
3814 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3816 * disassemble.c: New file.
3817 * Makefile.in (OFILES): Add disassemble.o.
3818 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3819 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3820 binutils/configure.in.
3822 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3823 opcode being examined.
3825 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3827 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3828 (insert_ral, insert_ram, insert_ras): New functions.
3829 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3830 RAS for store with update.
3832 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3834 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3835 (edelsohn@npac.syr.edu).
3837 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3839 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3842 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3844 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3846 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3848 * ppc-opc.c (powerpc_operands): The signedp field has been
3849 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3850 instead. Add new operand SISIGNOPT.
3851 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3852 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3853 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3856 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3858 * i386-dis.c (struct private): Renamed to dis_private. `private'
3859 is a reserved word for dynix cc.
3861 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3863 * configure.in: Change error message to refer to bfd/config.bfd
3864 rather than bfd/configure.in.
3866 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3868 * ppc-opc.c: Define POWER2 as short alias flag.
3869 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3872 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3874 * i960-dis.c (print_insn_i960): Don't read a second word for
3875 opcodes 0, 1, 2 and 3.
3877 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3879 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3881 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3883 * m68881-ext.c: Removed; no longer used.
3884 * Makefile.in: Changed accordingly.
3886 * m68k-dis.c (ext_format_68881): Don't declare.
3887 (print_insn_m68k): If an instruction uses place 'i', it uses at
3888 least four fixed bytes.
3889 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3890 extended float, convert to double using floatformat_to_double, not
3891 ieee_extended_to_double, and fetch the data before converting it.
3893 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3895 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3896 davidj@ICSI.Berkeley.EDU (David Johnson).
3898 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3900 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3901 PowerPC uses bdnz[l][a].
3903 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3905 * dis-buf.c, i386-dis.c: Include sysdep.h.
3907 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3909 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3911 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3912 by Motorola PowerPC 601 with PPC_OPCODE_601.
3913 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3914 Disassemble Motorola PowerPC 601 instructions as well as normal
3915 PowerPC instructions.
3917 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3919 * i960-dis.c (reg, mem): Just use a static array instead of
3922 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3924 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3925 condition name index if this is for a negated condition.
3927 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3928 Floating point format for 'H' operand is backwards from normal
3929 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3930 operands (fmpyadd and fmpysub), handle bizarre register
3931 translation correctly for single precision format.
3933 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3934 or 'I' operands if the next format specifier is 'M' (fcmp
3935 condition completer).
3937 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3939 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3940 single number giving a bitmask for the MB and ME fields of an M
3941 form instruction. Change NB to accept 32, and turn it into 0;
3942 also turn 0 into 32 when disassembling. Seperated SH from NB.
3943 (insert_mbe, extract_mbe): New functions.
3944 (insert_nb, extract_nb): New functions.
3945 (SC_MASK): Mask out SA and LK bits.
3946 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3947 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3948 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3949 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3950 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3951 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3952 (powerpc_macros): Define table of macro definitions.
3953 (powerpc_num_macros): Define.
3955 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3956 if PPC_OPERAND_NEXT is set.
3958 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3960 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3961 char. Retrieve contents using bfd_getl32 instead of shifting.
3963 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3965 * ppc-opc.c: New file. Opcode table for PowerPC, including
3966 opcodes for POWER (RS/6000).
3967 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3968 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3969 (CFILES): Add ppc-dis.c.
3970 (ppc-dis.o, ppc-opc.o): New targets.
3971 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3973 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3975 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3976 No space before 'u', 'f', or 'N'.
3978 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3980 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3981 farther than we should.
3983 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3985 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3987 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3989 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3991 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3992 needs it, to prevent reading past the end of a section.
3994 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3996 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3997 Removed t,A case for la; always use t,A(b) case.
3999 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4001 From Ted Lemen <mellon@pepper.ncd.com>
4002 * mips-dis.c (print_insn_arg): Handle 'k'.
4003 * mips-opc.c: Make cache use k, not t.
4005 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4007 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4008 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4009 FLOAT_FORMAT_CODE to put out floating point register names.
4011 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4013 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4015 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4017 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4019 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4021 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4022 larger than 32. Moved dsxx32 variants first for disassembler.
4024 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4026 * z8kgen.c, z8k-opc.h: Add full lda information.
4028 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4030 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4031 movb instructions. Any necessary space will be emitted by
4032 the code to handle nullification completers.
4034 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4036 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4038 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4040 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4041 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4043 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4045 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4047 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4049 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4050 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4052 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4054 * m88k-dis.c (m88kdis): comment change. Remove space after
4056 (printop): handle new arg types DEC and XREG for m88110.
4058 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4060 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4061 type for absolute branch addresses. Delete special
4062 "ble" and "be" code in 'W' operand code.
4064 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4066 * mips-opc.c: Set hazard information correctly for branch
4067 likely instructions.
4069 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4071 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4072 info->fprintf_func for printing and info->print_address_func for
4075 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4077 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4079 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4081 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4082 Corrected second case of "b" for disassembler.
4084 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4086 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4087 to BFD swapping routines to correspond to BFD name changes.
4089 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4091 * mips-opc.c: Change div machine instruction to be z,s,t rather
4092 than s,t. Change div macro to be d,v,t rather than d,s,t.
4093 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4094 rem and remu which generates only the corresponding div
4095 instruction. This is for compatibility with the MIPS assembler,
4096 which only generates the simple machine instruction when an
4097 explicit destination of $0 is used.
4098 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4100 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4102 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4103 WR_31 hazard for bal, bgezal, bltzal.
4105 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4107 * hppa-dis.c (print_insn_hppa): Use print function
4108 from within the disassemble_info, not fprintf_filtered.
4110 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4112 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4113 Law, law@cs.utah.edu.)
4115 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4117 * mips-opc.c ("absu"): Removed.
4120 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4122 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4123 Changed hazard information to distinguish between memory load
4124 delays and coprocessor load delays.
4126 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4128 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4130 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4132 * configure.in: Don't pass cpu to config.bfd.
4134 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4136 * m88k-dis.c (m88kdis): Make class unsigned.
4138 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4140 * alpha-dis.c (print_insn_alpha): One branch format case was
4141 missing the instruction name.
4143 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4145 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4146 Add the arch-specific auxiliary files.
4147 (OFILES): Remove the arch-specific auxiliary files
4148 and use BFD_MACHINES instead of DIS_LIBS.
4149 * configure.in: Set BFD_MACHINES based on --with-targets option.
4151 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4153 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4156 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4158 * sparc-opc.c: Change CONST to const to deal with gcc
4159 -Dconst=__const -traditional.
4161 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4163 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4164 coprocessor instructions out of #if 0, and made them use new
4167 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4169 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4171 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4173 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4174 instruction, for use by the disassembler.
4176 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4177 hand-coded sign extensions that depended on 32-bit host ints.
4178 FIXME, we still depend on big-endian host bitfield ordering.
4179 (sparc_print_insn): Set the insn_info_valid field, and the
4180 other fields that describe the instruction being printed.
4182 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4184 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4185 `jmp' instead of just one of them.
4187 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4189 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4190 (fput_fp_reg_r): Renamed from fput_reg_r.
4191 (fput_fp_reg): New function.
4192 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4194 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4196 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4198 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4200 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4202 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4203 don't output a space.
4205 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4207 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4209 * mips-opc.c: New file, containing opcode table from
4210 ../include/opcode/mips.h.
4211 * Makefile.in: Add it.
4213 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4215 * m88k-dis.c: New file, moved in from gdb and changed to use the
4216 new dis-asm.h disassembler interface.
4217 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4218 (m88k-dis.o): New target.
4220 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4222 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4223 argument string const char * to correspond to opcode/mips.h.
4225 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4227 * mips-dis.c: Updated to account for name changes in new version
4229 * Makefile.in: Added header file dependencies.
4231 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4233 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4235 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4237 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4238 extend, rather than shifts.
4240 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4242 * Makefile.in: Undo 15 June change.
4244 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4246 * m68k-dis.c (print_insn_arg): Change return value to byte count
4248 * m68k-dis.c: Re-write to detect invalid operands before
4249 printing anything, so we can handle this the same way we
4250 handle invalid opcodes.
4252 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4254 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4256 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4258 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4261 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4263 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4265 * configure.in: Do make sysdep.h link.
4266 * Makefile.in: Search ../include. Don't search ../bfd.
4268 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4270 Changes from Jeff Law, law@cs.utah.edu:
4271 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4272 Do not print a space before the completers specified by
4275 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4277 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4278 defined, since gdb has been fixed.
4280 Changes from Jeff Law, law@cs.utah.edu:
4281 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4282 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4283 be a *disassemble_info, not a *FILE.
4284 * hppa-dis.c: Support 'd', '!', and 'a'.
4285 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4286 * hppa-dis.c: Delete cases which are no longer needed.
4288 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4290 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4292 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4294 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4297 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4299 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4300 * configure.in: No longer need to configure to get sysdep.h.
4302 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4304 * Patches from Jeffrey Law <law@cs.utah.edu>.
4305 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4306 templates for 1.1 FP computational instructions.
4308 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4310 * h8500-dis.c (print_insn_h8500): Address argument is type
4312 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4315 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4316 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4318 * sparc-dis.c (compare_opcodes): Move static declaration to
4321 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4323 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4324 instruction, remove unimp hack from 'l' argument.
4326 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4328 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4331 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4333 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4334 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4337 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4339 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4340 arrays of string pointers to 2-d arrays of chars, to save
4343 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4345 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4346 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4348 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4350 * hppa-dis.c: New file from Utah, adapted to new disassembler
4352 * Makefile.in: Include it.
4354 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4356 * sh-dis.c, sh-opc.h: New files.
4358 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4360 * alpha-dis.c, alpha-opc.h: New files.
4362 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4364 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4367 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4369 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4371 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4373 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4376 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4378 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4379 and double percent signs a few places.
4381 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4383 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4384 Use info->print_address_func not print_address.
4386 * dis-buf.c (generic_print_address): New function.
4388 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4390 * Makefile.in: Add sparc-dis.c.
4391 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4393 Add `add' instruction to the set that get checked
4394 for a preceding `sethi' in order to print an absolute address.
4395 * (print_insn): Disassembly prefers real instructions.
4396 (is_delayed_branch): Speed up.
4397 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4398 Still missing some float ops, and needs testing.
4399 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4400 F_ALIAS. Use printf, not fprintf, when not passing a file
4402 (compare_opcodes): Check that identical instructions have
4403 identical opcodes, complain otherwise.
4406 * Include reg_names.
4408 Use dis-asm.h/read_memory_func interface.
4410 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4412 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4413 deliberately return non-zero to setjmp from longjmp. Otherwise
4414 this code fails to compile.
4416 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4418 * m68k-dis.c: Fix prototype for fetch_arg().
4420 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4422 * dis-buf.c: New file, for new read_memory_func interface.
4423 Makefile.in (OFILES): Include it.
4424 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4425 Use new read_memory_func interface.
4427 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4429 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4430 * h8500-opc.h: Fix couple of opcodes.
4432 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4434 * Makefile.in: add dvi & installcheck targets
4436 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4438 * Makefile.in: Update for h8500-dis.c.
4440 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4442 * h8500-dis.c, h8500-opc.h: New files
4444 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4446 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4447 ../include/dis-asm.h.
4448 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4449 and ../gdb/m68k-pinsn.c).
4450 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4451 and ../gdb/i386-pinsn.c).
4452 * m68881-ext.c: New file. Moved definition of
4453 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4454 * Makefile.in: Adjust for new files.
4455 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4456 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4457 can be dis-assembled.
4459 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4461 * mips-dis.c (print_insn_arg): Now returns void.
4463 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4465 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4466 files that use the macros.
4468 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4470 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4471 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4472 (CFILES): Added mips-dis.c.
4474 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4476 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4477 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4479 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4481 * Makefile.in: Improve *clean rules.
4482 * configure.in: Allow a default host.
4484 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4486 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4487 files include other sysdep files
4489 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4491 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4493 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4495 * configure.in: For host support, use ../bfd/configure.host
4496 so it stays in sync with the ../bfd/hosts database.
4498 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4500 * configure.in: use cpu-vendor-os triple instead of nested cases
4502 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4504 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4505 *always* the wrong one.
4507 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4509 * z8kgen.c: added copyright info
4511 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4513 * z8k-dis.c (unparse_instr): prettier tabs
4514 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4516 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4518 * configure.in: Add ncr* configuration.
4519 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4520 picayune ANSI compilers happy.
4522 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4524 * configure.in (i386): Make i386 and i486 synonymous for now.
4525 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4527 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4529 * Makefile.in (install): Fix typo.
4531 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4533 * Makefile.in (make): Remove obsolete crud.
4534 (sparc-opc.o): Avoid Sun Make VPATH bug.
4536 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4538 * Makefile.in: since there are no SUBDIRS, remove rule and
4539 references of subdir_do.
4541 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4543 * Makefile.in (install): Get the library name right here too.
4544 Don't install bfd.h, since it's unrelated to this library. No
4545 subdirs to recurse into, either.
4546 (CFILES): The source file has a .c suffix, not .o.
4548 * sparc-opc.c: New file, moved from BFD.
4549 * Makefile.in (OFILES): Build it.
4551 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4553 * z8k-dis.c: fixed forward refferences of some declarations.
4555 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4557 * Makefile.in: get the name of the library right
4559 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4561 * z8k-dis.c: knows how to disassemble z8k stuff
4562 * z8k-opc.h: new file full of z8000 opcodes
4566 version-control: never