opcodes/ChangeLog

   1 Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
   2
   3         * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
   4         (ctrl, cobr, mem, ea): Likewise.
   5         (print_addr): Likewise.  Remove cast.
   6         (ea): Cast argument of print_addr to bfd_vma.
   7
   8         * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
   9         variable value.
  10         (cgen_parse_unsigned_integer): Likewise.
  11         (cgen_parse_address): Likewise.
  12
  13 Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>
  14
  15         * i960-dis.c (ctrl): Add full braces to structure initialization.
  16         (cobr, mem, reg): Likewise.
  17         (ea): Correct parenthesization in expression.
  18
  19         * cgen-asm.c: Include <ctype.h>.
  20         (build_asm_hash_table): Remove unused local variable i.
  21         (cgen_parse_keyword): Add casts to avoid warnings.
  22
  23         * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
  24         symbol.  Fix indentation.
  25         (print_insn_little_arm): Likewise.
  26
  27 start-sanitize-r5900
  28 Tue Mar 24 18:11:13 1998  Jeffrey A Law  (law@cygnus.com)
  29
  30         * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
  31         opcode extensions.
  32
  33 end-sanitize-r5900
  34 start-sanitize-m32rx
  35 Mon Mar 23 11:32:11 1998  Nick Clifton  <nickc@cygnus.com>
  36
  37         * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
  38         (PR15418).
  39
  40 end-sanitize-m32rx
  41 start-sanitize-sky
  42 Mon Mar 23 09:45:04 1998  Doug Evans  <devans@canuck.cygnus.com>
  43
  44         * dvp-opc.c (vif_operand_datalen_special): New global.
  45
  46 end-sanitize-sky
  47 start-sanitize-r5900
  48 Sun Mar 22 13:00:14 1998  Jeffrey A Law  (law@cygnus.com)
  49
  50         * vu0.h (vcallms): Use 'O' for call target operand.
  51         * mips-dis.c (print_insn_arg): Handle 'O'.
  52
  53 end-sanitize-r5900
  54 Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>
  55
  56         * configure.in: Use AM_DISABLE_SHARED.
  57         * aclocal.m4, configure: Rebuild with libtool 1.2.
  58
  59 start-sanitize-r5900
  60 Fri Mar 20 09:01:31 1998  Jeffrey A Law  (law@cygnus.com)
  61
  62         * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
  63         support.
  64         * vu0.h: Likewise.
  65
  66 end-sanitize-r5900
  67 Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>
  68
  69         These patches are courtesy of Jonathan Walton and Tony Thompson
  70         (athompso@cambridge.arm.com).
  71
  72         * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
  73         relative addresses.
  74
  75         * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
  76         both the offset and the label closest to the destination.
  77
  78 start-sanitize-r5900
  79 Thu Mar 19 13:53:25 1998  Jeffrey A Law  (law@cygnus.com)
  80
  81         * vu0.h: New file with cop2/vu0 instructions.
  82         * mips-opc.c: Include vu0.h.
  83         * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
  84         J, Q, X, and U.
  85         (print_insn_mips): Do not emit a tab after an instruction if the
  86         first arg is an instruction completer (&).  If the next arg is an
  87         escape character (%), then print the next arg verbatim.
  88         * Makefile.am (mips-opc.lo): Depend on vu0.h
  89
  90 end-sanitize-r5900
  91 start-sanitize-sky
  92 Thu Mar 19 10:42:51 1998  Doug Evans  <devans@canuck.cygnus.com>
  93
  94         * dvp-opc.c (vif_opcodes): Add stcycl.
  95
  96 Tue Mar 17 10:53:58 1998  Doug Evans  <devans@canuck.cygnus.com>
  97
  98         * dvp-dis.c (print_dma): Change length from 16 to 8.
  99
 100 end-sanitize-sky
 101 Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>
 102
 103         * m32r-opc.h: Regenerate.
 104
 105 start-sanitize-sky
 106 Thu Mar 12 09:18:54 1998  Doug Evans  <devans@canuck.cygnus.com>
 107
 108         * dvp-opc.c (print_dest1): Print dest spec again.
 109         (print_vfreg,print_accdest): Likewise.
 110         (vif_unpack_len): Round result up to word boundary.
 111
 112 end-sanitize-sky
 113 start-sanitize-vr4320
 114 Tue Mar 10 15:57:23 1998  Gavin Koch  <gavin@cygnus.com>
 115
 116         * mips-opc.c ("clz","dclz"): Added the 4320 versions.
 117
 118 Mon Mar  9 15:22:06 1998  Gavin Koch  <gavin@cygnus.com>
 119
 120         * mips-opc.c ("macc*","mul*"): Added the 4320 versions
 121         of these.
 122
 123 end-sanitize-vr4320
 124 start-sanitize-sky
 125 Fri Mar  6 11:27:53 1998  Doug Evans  <devans@canuck.cygnus.com>
 126
 127         * dvp-dis.c (print_gif): Fix length calcs for gifimage.
 128         (print_insn): Do mask comparison on proper opcode word.
 129         Print unsigned values in hex.
 130         * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
 131         (parse_bc): Catch missing dest.
 132         (parse_vfreg): Replace atoi call with strtol.
 133         (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
 134         (parse_bcftreg,parse_ffstreg): Handle missing dest.
 135         (extract_gif_eop): New function.
 136         (gif_operands): Update eop entry.
 137         (VGIFOP,VGIFNREGS): Fix calcs.
 138         (extract_gif_prim): Set *pinvalid to 1 if prim not used.
 139         (gif_regs): Add entry for unused 11 case.
 140         (print_gif_regs): Print empty list instead of nothing.
 141         (extract_gif_nloop): Fix value calc.
 142         (print_gif_nloop): Always print value, even if 0.
 143         (insert_vif_wlcl,extract_vif_wlcl): New functions.
 144         (vif_operands): Use them for wl,cl fields.
 145         (state_vif_wl,state_vif_cl): New static locals.
 146         (parse_vif_mode): Handle numeric args.
 147         (vif_unpack_len_value,vif_unpack_len): New functions.
 148         (vif_insn_len): Call vif_unpack_len.
 149
 150 end-sanitize-sky
 151 Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>
 152
 153         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 154
 155 Tue Mar  3 18:51:22 1998  Doug Evans  <devans@seba.cygnus.com>
 156
 157         * cgen-asm.in: Move insertion of generated routines to top of file.
 158         (insert_normal): Add prototype.  Delete `shift' arg.
 159         * cgen-dis.in: Move insertion of generated routines to top of file.
 160         (extract_normal): Add prototype.  Delete `shift' arg.
 161         (print_normal): Add prototype.  Call CGEN_PRINT_NORMAL if defined.
 162         (print_keyword): Add prototype.  Fix type of `attrs' arg.
 163
 164 start-sanitize-vr4320
 165 Tue Mar  3 11:47:58 1998  Gavin Koch  <gavin@cygnus.com>
 166
 167         * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
 168         * mips-opc.c ("mac","dmac") : Added 4320 insns.
 169
 170 end-sanitize-vr4320
 171 Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>
 172
 173         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
 174         assume that info->symbols is non-empty.
 175
 176 Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>
 177
 178         * alpha-opc.c (cvtqs) There is no such thing.
 179         (cvttq): Missing most of the /*d variants.
 180
 181 start-sanitize-r5900
 182 Fri Feb 27 13:16:42 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 183
 184         * mips-opc.c (r5900/madd.s): Takes three operands, not four.  Fix
 185         opcode.
 186         (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
 187         (r5900/msub.s): Takes three operands, not four.  Fix opcode.
 188
 189 end-sanitize-r5900
 190 start-sanitize-d30v
 191 Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>
 192
 193         * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
 194         delayed branches or jumps.
 195
 196 end-sanitize-d30v
 197 start-sanitize-sky
 198 Fri Feb 27 10:04:19 1998  Doug Evans  <devans@canuck.cygnus.com>
 199
 200         * dvp-opc.c (vif_operands): Add unpack[u] support.
 201         (vif_opcodes): Ditto.
 202         (*_vif_imrubits): Renamed from *_vif_imrbits.
 203
 204 Wed Feb 25 00:27:44 1998  Doug Evans  <devans@canuck.cygnus.com>
 205
 206         * dvp-dis.c (print_insn): Handle word number.
 207         Handle mips address vs vu address.
 208         * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
 209         (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
 210         ({insert,extract}_dma_addr): Fix word ofset.
 211         ({insert,print}_gif_regs): Fix encode/decode.
 212
 213 end-sanitize-sky
 214 Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>
 215
 216         * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
 217         to *info->symbols.
 218         * mips-dis.c (print_insn_{big,little}_mips): Likewise.
 219         * tic30-dis.c (print_branch): Likewise.
 220 start-sanitize-sky
 221         * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
 222         * dvp-dis.c (dvp_info_mach_type): New function.
 223         (print_insn_dvp): Call it.
 224         (print_vif): Return length of 4 if mpg or direct insn so following
 225         insns get properly disabled.
 226         (print_gif): Fix word order.
 227         * dvp-opc.c (vif_insn_len): New argument `pcpu'.  All callers updated.
 228         (gif_operands): Fix word order.
 229         (gif_opcodes): Likewise.
 230         ({insert,extract,print}_gif_regs): Likewise.
 231         (gif_regs): Add new register number/name changes.
 232         (dma_opcodes): Add dmarefe insn.
 233 end-sanitize-sky
 234
 235 Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>
 236
 237         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
 238         saved_symbol code as it is no longer needed.
 239
 240 Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>
 241
 242         * cgen-asm.c: Include symcat.h.
 243         * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
 244
 245         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
 246
 247 start-sanitize-sky
 248 Mon Feb 23 09:51:39 1998  Doug Evans  <devans@canuck.cygnus.com>
 249
 250         * dvp-opc.c (extra_dma_flags): Fix typos.
 251         (dma_operands): Fix word numbers.
 252         (dma_opcodes): Likewise.
 253         ({insert,extract}_dma_flags): Likewise.
 254
 255 end-sanitize-sky
 256 Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)
 257
 258         * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
 259
 260 start-sanitize-sky
 261 Fri Feb 20 18:02:20 1998  Doug Evans  <devans@canuck.cygnus.com>
 262
 263         * dvp-dis.c (print_gif): Complete.
 264         * dvp-opc.c (gif_operands,gif_opcodes): Complete.
 265         (state_gif_{nregs,regs,nloop}): New static locals.
 266         (*_gif_*): Complete.
 267         (dvp_opcode_init_{parse,print}): Init gif state locals.
 268         (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
 269         (vif_insn_len): Handle `unpack'.
 270         ({insert,extract}_dma_flags): Complete.
 271
 272 end-sanitize-sky
 273 start-sanitize-r5900
 274 Fri Feb 20 01:23:16 1998  Jeffrey A Law  (law@cygnus.com)
 275
 276         * mips-opc.c (mula.s): Renamed from multa.s.
 277
 278 end-sanitize-r5900
 279 Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>
 280
 281         * m32r-opc.[ch]: Regenerate.
 282
 283 start-sanitize-sky
 284 Thu Feb 19 02:11:39 1998  Doug Evans  <devans@charmed.cygnus.com>
 285
 286         * dvp-opc.c (dma_operands): Rewrite.
 287         (dma_operand_{count,addr}): New globals.
 288         (dma_opcodes): Rewrite.  Add "dmaend" with no operands.
 289         (insert_dma_addr): Insert value into insn.
 290         (extract_dma_addr): Extract value from insn.
 291
 292 Wed Feb 18 15:46:46 1998  Doug Evans  <devans@canuck.cygnus.com>
 293
 294         * dvp-dis.c (print_vu): Handle loi insns.
 295         (print_insn): Likewise.
 296         * dvp-opc.c (vu_lower_opcodes): Add "loi".
 297         (vu_operands): Make LDEST1 a FAKE operand.
 298         (parse_dest1): Allow elided argument.
 299         (print_dest1): Don't print the argument.
 300
 301 Tue Feb 17 18:48:25 1998  Doug Evans  <devans@canuck.cygnus.com>
 302
 303         * dvp-opc.c (parse_vfreg): Dest spec is optional.
 304         (print_vfreg): Don't print dest spec.
 305         (parse_accdest): Dest spec is optional.
 306         (print_accdest): Don't print dest spec.
 307
 308 end-sanitize-sky
 309 Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>
 310
 311         * Makefile.am (CGENFILES): Update.
 312         * Makefile.in: Regenerate.
 313         * cgen-asm.in (insert_normal): Result is error message now.
 314         Validate value to be inserted.
 315         (insert_insn_normal): Result is error message now.
 316         (@arch@_cgen_assemble_insn): Update.
 317         * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
 318         arguments.  Don't perform validation here.
 319         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
 320
 321 Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>
 322
 323         * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
 324         operand instance list.
 325         * m32r-opc.c: Regenerate.
 326
 327 Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>
 328
 329         * Makefile.am (AUTOMAKE_OPTIONS): Define.
 330         * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
 331
 332 Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>
 333
 334         * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
 335
 336 Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>
 337
 338         * configure.in: Get the version number from BFD.
 339         * configure: Rebuild.
 340
 341         From H.J. Lu <hjl@gnu.org>:
 342         * Makefile.am (libopcodes_la_LDFLAGS): Define.
 343         * Makefile.in: Rebuild.
 344
 345 Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>
 346
 347         * m32r-opc.c: Regenerate.
 348         * m32r-opc.h: Regenerate.
 349
 350 Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>
 351
 352         * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
 353         Ignore ALIAS insns if asked to.
 354         (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
 355         * m32r-opc.c: Regenerate.
 356
 357 start-sanitize-sky
 358         * dvp.opc.c: Nicely format opcode tables.
 359         (vu_operands): New element UFLAGS.
 360         (parse_uflags,print_uflags): New functions.
 361         (vu_upper_opcodes): Add UFLAGS to all insns.
 362
 363 end-sanitize-sky
 364 Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>
 365
 366         Fix rac to accept only a0:
 367         * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
 368         Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
 369         Introduce OPERAND_GPR.
 370         * d10v-dis.c (print_operand): Likewise.
 371
 372 Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>
 373
 374         * cgen-opc.in: New file.
 375         * cgen.sh: Translate @ARCH@.  Cat cgen-opc.in into @arch@-opc.c.
 376         * Makefile.am (CGENFILES): Add cgen-opc.in.
 377         * Makefile.in: Regenerate.
 378
 379         * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
 380         (cgen_hw_lookup): Make result const.
 381
 382         * cgen-dis.in (*): Use PTR instead of void *.
 383         (print_insn): Delete unused vars `i', `syntax'.
 384
 385         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
 386
 387 start-sanitize-sky
 388 Tue Feb 10 14:56:24 1998  Doug Evans  <devans@canuck.cygnus.com>
 389
 390         * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
 391         (vif_opcodes): Update renamed insns.
 392         * dvp-dis.c (*): Likewise.
 393
 394 end-sanitize-sky
 395 Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>
 396
 397         * configure, aclocal.m4: Rebuild with new libtool.
 398
 399 start-sanitize-d30v
 400 Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>
 401
 402         * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
 403         instructions use a PC relative branch, not absolute.
 404
 405 end-sanitize-d30v
 406 Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>
 407
 408         * configure.in: Set libtool_enable_shared rather than
 409         libtool_shared.  Remove diversion hack.
 410         * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
 411
 412 Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>
 413
 414         * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
 415         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
 416
 417 Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>
 418
 419         * tic30-dis.c: New file.
 420         * disassemble.c (disassembler): Add bfd_arch_tic30 case.
 421         * configure.in: Handle bfd_tic30_arch.
 422         * Makefile.am: Rebuild dependencies.
 423         (CFILES): Add tic30-dis.c
 424         (ALL_MACHINES): Add tic30-dis.lo.
 425         * configure, Makefile.in: Rebuild.
 426
 427 start-sanitize-m32rx
 428 Mon Feb  2 11:04:08 1998  Nick Clifton  <nickc@cygnus.com>
 429
 430         * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
 431         versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
 432         macwhi-a and macwlo-a instructions.
 433
 434 end-sanitize-m32rx
 435 start-sanitize-sky
 436 Fri Jan 30 17:39:21 1998  Ian Carmichael  <iancarm@cygnus.com>
 437
 438         * dvp-opc.c, fixed encoding of a bunch of instructions to
 439         be consistent with the asmvu assembler (and inconsistent
 440         with the specification).
 441
 442 Thu Jan 29 18:14:56 1998  Ian Carmichael  <iancarm@cygnus.com>
 443
 444         * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
 445         in the opcode table.  The pkemscalf instruction must come first.
 446
 447 Thu Jan 29 16:47:24 1998  Ian Carmichael  <iancarm@cygnus.com>
 448
 449         * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
 450
 451 end-sanitize-sky
 452 Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>
 453
 454         * m32r-opc.h (HAVE_CPU_M32R): Define.
 455
 456 start-sanitize-sky
 457 Wed Jan 28 13:46:19 1998  Doug Evans  <devans@canuck.cygnus.com>
 458
 459         * dvp-dis.c, dvp-opc.c: New files.
 460         * configure.in: Compile them if bfd_dvp_arch, as well as mips.
 461         * configure: Regenerate.
 462         * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
 463         (dvp-dis.lo,dvp-opc.lo): Add rules for.
 464         (mips-dis.lo): Compile with @archdefs@.
 465         * Makefile.in: Regenerate.
 466         * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
 467         * mips-dis.c (print_insn_little_mips): Check for DVP insns.
 468
 469 end-sanitize-sky
 470 Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>
 471
 472         * v850-opc.c (insertion routines): If both alignment and size is
 473         wrong then report this.
 474
 475 Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)
 476
 477         * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
 478         Only recognize instructions for the current target_processor.
 479
 480 Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>
 481
 482         * d10v-dis.c (PC_MASK): Correct value.
 483         (print_operand): If there's a reloc, don't calculate the
 484         address because they could be in different sections.
 485
 486 start-sanitize-cygnus
 487 Thu Jan 22 16:10:32 1998  Doug Evans  <devans@seba.cygnus.com>
 488
 489         * cgen.sh: Rewrite to be like simulator's version.
 490         * Makefile.am (cgen): Update call to cgen.sh.
 491         * Makefile.in: Regenerate
 492
 493 end-sanitize-cygnus
 494 Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>
 495
 496         * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
 497         instruction after the 4650's "mul" instruction; nobody's using the
 498         4010 these days.  If object files someday indicate which processor
 499         variant they're intended for, we can do a better job at this.
 500
 501 start-sanitize-r5900
 502 Tue Jan 13 09:21:56 1998  Jeffrey A Law  (law@cygnus.com)
 503
 504         * mips-opc.c (c.lt.s): Add r5900 variant.
 505         (c.le.s): Likewise.
 506
 507 end-sanitize-r5900
 508 Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>
 509
 510         * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
 511         table provided entry size.  Use CGEN_INSN_MNEMONIC.
 512         (cgen_parse_keyword): Rewrite.
 513         * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
 514         table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
 515         * cgen-opc.c: Clean up pass over `struct foo' usage.
 516         (cgen_keyword_lookup_value): Handle "" entry.
 517         (cgen_keyword_add): Likewise.
 518 start-sanitize-cygnus
 519         * Makefile.am: Add cgen support.
 520         * Makefile.in: Regenerate.
 521         * configure.in: Add cgen support.
 522         * configure: Regenerate.
 523         * aclocal.m4: Regenerate.
 524         * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
 525 end-sanitize-cygnus
 526
 527 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
 528
 529         * mips-opc.c: Add FP_D to s.d instruction flags.
 530
 531 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 532
 533         * m68k-opc.c (halt, pulse): Enable them on the 68060.
 534
 535 start-sanitize-tic80
 536 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
 537
 538         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
 539         PC relative offset forms before the 15 bit forms.  An assembler command
 540         line option now chooses the default.
 541
 542 end-sanitize-tic80
 543 start-sanitize-r5900
 544 Tue Dec 16 13:24:22 1997  Jeffrey A Law  (law@cygnus.com)
 545
 546         * mips-opc.c: Add many missing r5900 instructions.
 547
 548 end-sanitize-r5900
 549 start-sanitize-d30v
 550 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
 551
 552         * d30v-opc.c (d30v_opcode_table): Set new flags bits
 553         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
 554
 555 end-sanitize-d30v
 556 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
 557
 558         * configure: Only build libopcodes shared if --enable-shared's value
 559         was `yes', or was set to `*opcodes*'.
 560         * aclocal.m4: Likewise.
 561         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
 562         original source of this bit of code.  It's not clear what the best fix
 563         would be, though.
 564
 565 start-sanitize-r5900
 566 Mon Dec 15 12:43:36 1997  Jeffrey A Law  (law@cygnus.com)
 567
 568         * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
 569 end-sanitize-r5900
 570 start-sanitize-tic80
 571 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
 572
 573         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
 574         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
 575         offset forms before the 15 bit forms, to default to the long forms.
 576
 577 end-sanitize-tic80
 578 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
 579
 580         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
 581
 582 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
 583
 584         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
 585         symbol if none is present.
 586         (print_insn_big_arm):  Prevent examination of stored symbol if
 587         none is present.
 588
 589 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
 590
 591         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
 592
 593 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
 594
 595         * disassemble.c: Remove disasm_symaddr() function.
 596
 597         * arm-dis.c: Use info->symbol instead of info->flags to determine
 598         if disassmbly should be in Thumb or Arm mode.
 599
 600 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
 601
 602         * arm-dis.c: Add support for disassembling Thumb opcodes.
 603         (print_insn_thumb): New function.
 604
 605         * disassemble.c (disasm_symaddr): New function.
 606
 607         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
 608         (thumb_opcodes): Table of Thumb opcodes.
 609
 610 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 611
 612         * m68k-opc.c (btst): Change Dd@s to Dd;b.
 613
 614         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
 615         and 'v' as operand types.
 616
 617 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
 618
 619         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
 620         <olivier.carmona@di.epfl.ch>.
 621         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
 622         which has a two word opcode with a one word argument.
 623
 624 start-sanitize-d30v
 625 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
 626
 627         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
 628         unsigned, not signed.
 629         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
 630
 631 end-sanitize-d30v
 632 Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>
 633
 634         * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
 635         * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
 636         (ftrv): Slay the cut-and-paste monster.
 637
 638 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
 639
 640         * d10v-dis.c (print_operand):
 641         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
 642
 643 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
 644
 645         * d10v-opc.c (OPERAND_FLAG): Split into:
 646         (OPERAND_FFLAG, OPERAND_CFLAG) .
 647         (FSRC): Split into:
 648         (FFSRC, CFSRC).
 649
 650 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
 651
 652         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
 653         field for all INSN_MACRO's.
 654         * mips16-opc.c: same
 655
 656 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
 657
 658         * mips-opc.c (sync,cache): These are 3900 insns.
 659
 660 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 661
 662         sh-opc.h (sh_table): Remove ftst/nan.
 663
 664 start-sanitize-vr5400
 665 Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>
 666
 667         * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
 668         (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
 669         last.
 670         * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
 671
 672 end-sanitize-vr5400
 673 start-sanitize-tx49
 674 Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>
 675
 676         * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
 677         Add tx49 insns and configury.
 678
 679 end-sanitize-tx49
 680 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
 681
 682         * mips-opc.c (ffc, ffs): Fix mask.
 683
 684 start-sanitize-d30v
 685 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
 686
 687         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
 688         control registers.
 689
 690 end-sanitize-d30v
 691 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 692
 693         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 694 start-sanitize-vr5400
 695         Added VR5400 instructions.
 696         (N5): New cpu-id macro.
 697 end-sanitize-vr5400
 698         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 699
 700 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 701
 702         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 703         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 704
 705 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
 706
 707         * v850-dis.c (disassemble): Replace // with /* ... */
 708
 709 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
 710
 711         * sparc-opc.c: Add wr & rd for v9a asr's.
 712         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
 713         (v9a_asr_reg_names): New variable.
 714         Patch from David Miller <davem@vger.rutgers.edu>.
 715
 716 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
 717
 718         * sparc-opc.c (v9notv9a): New insn type.
 719         (IMPDEP): Move to the end to not conflict with edge8 et al.
 720         Patch from David Miller <davem@vger.rutgers.edu>.
 721
 722 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
 723
 724         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
 725
 726 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
 727
 728         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
 729
 730 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
 731
 732         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
 733         of disassemble_info structure to determine if an overlay address
 734         has a matching symbol in low memory.
 735
 736         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
 737         new symbol_at_address_func field in disassemble_info structure.
 738
 739 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
 740
 741         * v850-opc.c (extract_d22): Use signed arithmatic.
 742
 743 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
 744
 745         * mips-opc.c: Three op mult is not an ISA insn.
 746
 747 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
 748
 749         * mips-opc.c: Fix formatting.
 750
 751 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
 752
 753         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
 754         than assuming that char is signed.  Explicitly sign extend 16 bit
 755         values, rather than assuming that short is 16 bits.
 756         (OP_sI, OP_J, OP_DIR): Likewise.
 757
 758 start-sanitize-v850e
 759 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
 760
 761         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
 762         system registers.
 763
 764 end-sanitize-v850e
 765 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
 766
 767         * v850-opc.c: Fix typo in comment.
 768
 769         * v850-dis.c (disassemble): Add test of processor type when
 770         determining opcodes.
 771
 772 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 773
 774         * configure.in: Use a diversion to set enable_shared before the
 775         arguments are parsed.
 776         * configure: Rebuild.
 777
 778 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 779
 780         * m68k-opc.c (TBL1): Use ! rather than `.
 781         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
 782
 783 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
 784
 785         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
 786
 787         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
 788
 789         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
 790         for mcf5200.
 791
 792         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
 793         * aclocal.m4: Rebuild with new libtool.
 794         * configure: Rebuild.
 795
 796 start-sanitize-v850e
 797 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 798
 799         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
 800
 801 end-sanitize-v850e
 802 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
 803
 804         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
 805
 806 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
 807
 808         * v850-opc.c (v850_opcodes): Further rearrangements.
 809
 810 start-sanitize-d30v
 811 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
 812
 813         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
 814
 815 end-sanitize-d30v
 816 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
 817
 818         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
 819         parser to work.
 820
 821 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
 822
 823         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
 824 start-sanitize-tx19
 825         * mips16-opc.c: Added mips16 sdbbp.
 826 end-sanitize-tx19
 827
 828 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
 829
 830         * v850-opc.c: Initialise processors field of v850_opcode structure.
 831
 832 start-sanitize-d30v
 833 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
 834
 835         Merge changes from Martin Hunt:
 836
 837         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
 838
 839         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
 840         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
 841         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
 842
 843         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
 844
 845         * d30v-dis.c (print_insn): First operand of d*i (delayed
 846         branch) instructions is relative.
 847
 848         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
 849         (d30v_operand_table): Add IMM6S3 type.
 850         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
 851
 852         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
 853         and cmp instructions.
 854
 855         * d30v-opc.c: Correct entries for repeat*, and sat*.
 856         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
 857         types. Correct several formats.
 858
 859         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
 860
 861         * d30v-opc.c (pre_defined_registers): Change control registers.
 862
 863         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
 864         SHORT_C2.  Manual was incorrect.
 865
 866         * d30v-dis.c (lookup_opcode):  Return value now indicates
 867         if an opcode has a short and a long form.  Used for deciding
 868         to append a ".s" or ".l".
 869         (print_insn): Append a ".s" to an instruction if it is
 870         the short form and ".l" if it is a long form. Do not append
 871         anything if the instruction has only one possible size.
 872
 873         * d30v-opc.c: Change mulx2h to require an even register.
 874         New form: SHORT_A2; a SHORT_A form that needs an even
 875         register as the first operand.
 876
 877         * d30v-dis.c (print_insn_d30v): Fix problem where the last
 878         instruction was not being disassembled if there were an odd
 879         number of instructions.
 880
 881         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
 882
 883 end-sanitize-d30v
 884 start-sanitize-v850e
 885 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
 886
 887         * v850-dis.c (disassemble): Improved display of register lists.
 888
 889 end-sanitize-v850e
 890 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
 891
 892         * sparc-opc.c (sparc_opcodes): Fix assembler args to
 893         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
 894         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
 895         fandnot1s, fandnot2s.
 896
 897 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
 898
 899         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
 900
 901 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
 902
 903         * cgen-asm.c (cgen_parse_address): New argument resultp.
 904         All callers updated.
 905         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
 906
 907 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
 908
 909         * mn10200-dis.c (disassemble): PC relative instructions are
 910         relative to the next instruction, not the current instruction.
 911
 912 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
 913
 914         * v850-dis.c (disassemble): Only signed extend values that are not
 915         returned by extract functions.
 916         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
 917
 918 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
 919
 920         * v850-opc.c: Update comments.  Remove use of
 921         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
 922
 923 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
 924
 925         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
 926
 927 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
 928
 929         * configure: Rebuilt with latest devo autoconf for NT support.
 930
 931 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
 932
 933         * v850-dis.c (disassemble): Use curly brace syntax for register
 934         lists.
 935
 936         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
 937         where r0 is being used as a destination register.
 938
 939 start-sanitize-v850e
 940 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
 941
 942         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
 943 end-sanitize-v850e
 944
 945 Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 946
 947         * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
 948         (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
 949         (sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
 950         Add insns to access SGR and DBR.
 951         * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
 952
 953 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
 954
 955         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
 956
 957 start-sanitize-v850e
 958 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
 959
 960         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
 961         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
 962         opcodes..
 963
 964 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 965
 966         * configure (cgen_files): Add support for v850e target.
 967         * configure.in (cgen_files):  Add support for v850e target.
 968
 969 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 970
 971         * configure (cgen_files): Add support for v850ea target.
 972         * configure.in (cgen_files):  Add support for v850ea target.
 973 end-sanitize-v850e
 974
 975 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
 976
 977         * configure.in (bfd_arc_arch): Add.
 978         * configure: Rebuild.
 979         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
 980         * Makefile.in: Rebuild.
 981         * arc-dis.c, arc-opc.c: New files.
 982         * disassemble.c (ARCH_all): Define ARCH_arc.
 983         (disassembler): Add ARC support.
 984
 985 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
 986
 987 start-sanitize-v850e
 988         * v850-dis.c (disassemble): Add support for v850EA instructions.
 989
 990         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
 991         (v850_opcodes): Add v850EA instructions.
 992
 993         * v850-dis.c (disassemble): Add support for v850E instructions.
 994
 995         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
 996         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
 997         insert_spe, extract_spe): New Functions.
 998         (v850_opcodes): Add v850E instructions.
 999 end-sanitize-v850e
1000
1001         * v850-opc.c: Reorganised and re-layed out to improve readability
1002         and portability.
1003
1004 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
1005
1006         * configure: Rebuild with autoconf 2.12.1.
1007
1008 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
1009
1010         * aclocal.m4, configure: Rebuild with new automake patches.
1011
1012 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
1013
1014         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1015         * acinclude.m4: Just include acinclude.m4 from BFD.
1016         * aclocal.m4, configure: Rebuild.
1017
1018 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
1019
1020         * Makefile.am: New file, based on old Makefile.in.
1021         * acconfig.h: New file.
1022         * acinclude.m4: New file.
1023         * stamp-h.in: New file.
1024         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1025         Removed shared library handling; now handled by libtool.  Replace
1026         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
1027         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
1028         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
1029         handling in AC_OUTPUT.
1030         * dep-in.sed: Change .o to .lo.
1031         * Makefile.in: Now built with automake.
1032         * aclocal.m4: Now built with aclocal.
1033         * config.in, configure: Rebuild.
1034
1035 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
1036
1037         * mips-opc.c: Fix typo/thinko in "eret" instruction.
1038
1039 start-sanitize-r5900
1040 Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1041
1042         * mips-opc.c: Fix coding of mtsa.
1043
1044 end-sanitize-r5900
1045 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
1046
1047         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1048         Make array const.
1049         * sparc-dis.c (sorted_opcodes): New static local.
1050         (struct opcode_hash): `opcode' is pointer to const element.
1051         (build_hash): First arg is now table of sorted pointers.
1052         (print_insn_sparc): Sort opcodes by sorting table of pointers.
1053         (compare_opcodes): Update.
1054
1055 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
1056
1057         * cgen-opc.c: #include <ctype.h>.
1058         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
1059         Handle case insensitive hashing.
1060         (hash_keyword_value): Change type of `value' to unsigned int.
1061
1062 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
1063
1064         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1065         precision FP, mark it as such.  Likewise for double precision
1066         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
1067         possible.
1068 start-sanitize-r5900
1069         (mips_builtin_opcodes): Remove non-existant r5900 instructions
1070 end-sanitize-r5900
1071
1072 start-sanitize-r5900
1073 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
1074
1075         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1076         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1077
1078 end-sanitize-r5900
1079 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
1080
1081         * ppc-opc.c (extract_nsi): make unsigned expression signed before
1082         negating it.
1083         (UNUSED): remove one level of parens, so MSVC doesn't choke on
1084         nesting depth when all the macros are expanded.
1085
1086 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
1087
1088         * sparc-opc.c: The fcmp v9a instructions take an integer register
1089         as a destination, not a floating point register.  From Christian
1090         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1091
1092 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
1093
1094         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1095         syntax.  From Roman Hodek
1096         <rnhodek@faui22c.informatik.uni-erlangen.de>.
1097
1098         * i386-dis.c (twobyte_has_modrm): Fix pand.
1099
1100 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
1101
1102         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1103
1104 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
1105
1106         * arm-dis.c: Add prototypes for arm_decode_shift and
1107         print_insn_arm.
1108
1109 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
1110
1111         * mips-opc.c: Add r3900 insns.
1112
1113 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
1114
1115         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
1116         print delay slot instructions on the same line.  When using a PC
1117         relative load, add a comment with the value being loaded if it can
1118         be obtained.
1119
1120 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
1121
1122         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1123         to pushS/popS for segment regs and byte constant so that
1124         pushw/popw printed when in 16 bit data mode.
1125
1126         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1127         print cbtw, cwtd in 16 bit data mode.
1128         * i386-dis.c (putop): extra case W to support above.
1129
1130         * i386-dis.c (print_insn_x86): print addr32 prefix when given
1131         address size prefix in 16 bit address mode.
1132
1133 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
1134
1135         * sh-dis.c: Reindent.  Rename local variable fprintf to
1136         fprintf_fn.
1137
1138 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
1139
1140         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1141
1142 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
1143
1144         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1145           field membership.
1146         * mips16-opc.c (mip16_opcodes): same.
1147
1148 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
1149
1150         * m68k-opc.c (moveb): Change $d to %d.
1151
1152 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
1153
1154         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1155         (twobyte_has_modrm): Likewise.
1156         (grps): Likewise.
1157         (OP_MMX, OP_EM, OP_MS): New static functions.
1158
1159         * i386-dis.c: Revert patch of April 4.  The output now matches
1160         what gcc generates.
1161
1162 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
1163
1164         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1165         of $simm16.
1166
1167 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
1168
1169         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1170
1171 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
1172
1173         * Makefile.in (install): Depend upon installdirs.
1174         (installdirs): New target.
1175
1176 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
1177
1178         From Thomas Graichen <graichen@rzpd.de>:
1179         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1180         * configure: Rebuild.
1181
1182 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
1183
1184         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1185         Delete string{,s}.h support.
1186
1187 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
1188
1189         * cgen-asm.c (cgen_parse_operand_fn): New global.
1190         (cgen_parse_{{,un}signed_integer,address}): Update call to
1191         cgen_parse_operand_fn.
1192         (cgen_init_parse_operand): New function.
1193         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1194         from cgen_asm_init_parse.
1195         (m32r_cgen_assemble_insn): New operand `errmsg'.
1196         Delete call to as_bad, return error message to caller.
1197         (m32r_cgen_asm_hash_keywords): #if 0 out.
1198
1199 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1200
1201         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1202         not data register.
1203         [case 'J']: Fix typo in register name.
1204
1205 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
1206
1207         * configure.in: Substitute SHLIB_LIBS.
1208         * configure: Rebuild.
1209         * Makefile.in (SHLIB_LIBS): New variable.
1210         ($(SHLIB)): Use $(SHLIB_LIBS).
1211
1212 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
1213
1214         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1215
1216         * cgen-opc.c (hash_keyword_name): Improve algorithm.
1217
1218         * disassemble.c (disassembler): Handle m32r.
1219
1220 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
1221
1222         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1223         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1224         * Makefile.in (CFILES): Add them.
1225         (ALL_MACHINES): Add them.
1226         (dependencies): Regenerate.
1227         * configure.in (cgen_files): New variable.
1228         (bfd_m32r_arch): Add entry.
1229         * configure: Regenerate.
1230
1231 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
1232
1233         * configure.in: Correct file names for bfd_mn10[23]00_arch.
1234         * configure: Rebuild.
1235
1236         * Makefile.in: Rebuild dependencies.
1237
1238         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1239
1240         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
1241         fdivp.
1242
1243 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
1244
1245         * Branched binutils 2.8.
1246
1247 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
1248
1249         * m10200-dis.c: Rename from mn10200-dis.c.
1250         * m10200-opc.c: Rename from mn10200-opc.c.
1251         * m10300-dis.c: Rename from mn10300-dis.c
1252         * m10300-opc.c: Rename from mn10300-opc.c.
1253         * Makefile.in: Update accordingly.
1254
1255         * mips16-opc.c: Add mul and dmul macros.
1256
1257 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
1258
1259         * makefile.vms: Update CFLAGS, add clean target.
1260
1261 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
1262
1263         * mips-opc.c: Add "wait".  From Ralf Baechle
1264         <ralf@gnu.ai.mit.edu>.
1265
1266         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1267         * configure, config.in: Rebuild.
1268         * sysdep.h: Include <stdlib.h> if it exists.
1269         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
1270         <string.h>.
1271         * Makefile.in: Rebuild dependencies.
1272
1273 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
1274
1275         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
1276         Andrew Bray <andy@madhouse.demon.co.uk>.
1277
1278         * mips-opc.c: Add cast when setting mips_opcodes.
1279
1280 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
1281
1282         * v850-dis.c (disassemble):  Fix sign extension problem.
1283         * v850-opc.c (extract_d*):  Fix sign extension problems to make
1284         disassembly calculate branch offsets correctly.
1285
1286 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
1287
1288         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1289
1290         * mips-opc.c: Add dctr and dctw.
1291
1292 start-sanitize-d30v
1293 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1294
1295         * d30v-dis.c (print_insn): Change the way signed constants
1296         are displayed.
1297 end-sanitize-d30v
1298 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
1299
1300         * Makefile.in (BFD_H): New variable.
1301         (HFILES): New variable.
1302         (CFILES): Add all C files.
1303         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1304         Delete old dependencies, and build new ones.
1305         * dep-in.sed: New file.
1306
1307 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
1308
1309         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1310
1311 start-sanitize-coldfire
1312 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
1313
1314         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1315         instructions.
1316
1317 end-sanitize-coldfire
1318 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
1319
1320         * mn10200-opc.c: Change "trap" to "syscall".
1321         * mn10300-opc.c: Add new "syscall" instruction.
1322
1323 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
1324
1325         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1326         mulul insns on the coldfire.
1327
1328 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
1329
1330         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1331         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1332         (print_insn_little_arm): Likewise.
1333
1334 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
1335
1336         Based on patches from H.J. Lu <hjl@lucon.org>:
1337         * i386-dis.c (fetch_data): Add prototype.
1338         * m68k-dis.c (fetch_data): Add prototype.
1339         (dummy_print_address): Add prototype.  Make static.
1340         * ppc-opc.c (valid_bo): Add prototype.
1341         * sparc-dis.c (build_hash_table): Add prototype.
1342         (is_delayed_branch, compute_arch_mask): Add prototypes.
1343         (print_insn_sparc): Make several local variables const.
1344         (compare_opcodes): Change arguments to const PTR.  Add prototype.
1345         * sparc-opc.c (arg): Change name field to be const.
1346         (lookup_name, lookup_value): Add prototypes.  Change table and
1347         name parameters to be const.
1348         (sparc_encode_asi): Change name parameter to be const.
1349         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1350         (sparc_encode_sparclet_cpreg): Likewise.
1351         (sparc_decode_asi): Change return type to be const.
1352         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1353         (sparc_decode_sparclet_cpreg): Likewise.
1354
1355 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
1356
1357         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1358         Solaris doesn't like the combined options, and the -f is
1359         unnecessary.
1360         (stamp-tshlink, install): Likewise.
1361
1362 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
1363
1364         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1365         as relaxable.
1366
1367 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
1368
1369         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1370
1371 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
1372
1373         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1374         the mc68000.
1375
1376 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
1377
1378         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1379
1380 start-sanitize-tic80
1381 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
1382
1383         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1384
1385 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
1386
1387         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1388
1389 end-sanitize-tic80
1390 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1391
1392         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1393         floatformat_to_double to make portable.
1394         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1395         precision float.
1396
1397 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
1398
1399         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1400         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1401
1402 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1403
1404         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1405         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1406
1407 start-sanitize-tic80
1408 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
1409
1410         * tic80-opc.c (LSI_SCALED): Renamed from this ...
1411         (OFF_SL_BR_SCALED): ... to this, and added the flag
1412         TIC80_OPERAND_BASEREL to the flags word.
1413         (tic80_opcodes): Replace all occurances of LSI_SCALED with
1414         OFF_SL_BR_SCALED.
1415
1416 end-sanitize-tic80
1417 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
1418
1419         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1420         Change mips_opcodes from const array to a pointer,
1421         and change bfd_mips_num_opcodes from const int to int,
1422         so that we can increase the size of the mips opcodes table
1423         dynamically.
1424
1425 start-sanitize-tic80
1426 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
1427
1428         * tic80-opc.c (tic80_predefined_symbols): Revert change to
1429         store BITNUM values in the table in one's complement form
1430         to match behavior when assembler is given a raw numeric
1431         value for a BITNUM operand.
1432         * tic80-dis.c (print_operand_bitnum): Ditto.
1433
1434 end-sanitize-tic80
1435 start-sanitize-d30v
1436 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1437
1438         * d30v-opc.c: Removed references to FLAG_X.
1439
1440 end-sanitize-d30v
1441 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
1442
1443         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1444
1445 start-sanitize-d30v
1446 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1447
1448         * Makefile.in: Added d30v object files.
1449         * configure: (bfd_d30v_arch) Rebuilt.
1450         * configure.in: (bfd_d30v_arch) Added new case.
1451         * d30v-dis.c: New file.
1452         * d30v-opc.c: New file.
1453         * disassemble.c (disassembler) Add entry for d30v.
1454
1455 end-sanitize-d30v
1456 start-sanitize-tic80
1457 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
1458
1459         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1460         representations for the floating point BITNUM values.
1461
1462 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
1463
1464         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1465         in the table in one's complement form, as they appear in the
1466         actual instruction.
1467         (tic80_symbol_to_value): Use macros to access predefined
1468         symbol fields.
1469         (tic80_value_to_symbol): Ditto.
1470         (tic80_next_predefined_symbol): New function.
1471         * tic80-dis.c (print_operand_bitnum): Remove code that did
1472         one's complement for BITNUM values.
1473
1474 end-sanitize-tic80
1475 start-sanitize-r5900
1476 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
1477
1478         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1479
1480 end-sanitize-r5900
1481 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
1482
1483         * makefile.vms: Remove 8 bit characters.  Update to latest
1484         gcc release.
1485
1486 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
1487
1488         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1489
1490 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
1491
1492         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1493         (IMM24_PCREL): Likewise.
1494
1495 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
1496
1497         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1498         address for an extended PC relative instruction that is not a
1499         branch.
1500
1501 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1502
1503         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1504         bytes_per_line.
1505
1506 start-sanitize-tic80
1507 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
1508
1509         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1510         (tic80_opcodes): Sort entries so that long immediate forms
1511         come after short immediate forms, making it easier for
1512         assembler to select the right one for a given operand.
1513
1514 end-sanitize-tic80
1515 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
1516
1517         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1518         display_endian.
1519         (print_insn_mips16): Likewise.
1520
1521 start-sanitize-r5900
1522 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
1523
1524         * mips-opc.c: add r5900.
1525
1526 end-sanitize-r5900
1527 start-sanitize-tic80
1528 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
1529
1530         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1531         a symbol class that restricts translation to just that
1532         class (general register, condition code, etc).
1533
1534 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
1535
1536         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1537         and REG_DEST_E for register operands that have to be
1538         an even numbered register.  Add REG_FPA for operands that
1539         are one of the floating point accumulator registers.
1540         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1541         (tic80_opcodes): Change entries that need even numbered
1542         register operands to use the new operand table entries.
1543         Add "or" entries that are identical to "or.tt" entries.
1544
1545 end-sanitize-tic80
1546 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
1547
1548         * mips16-opc.c: Add new cases of exit instruction for
1549         disassembler.
1550         * mips-dis.c (print_mips16_insn_arg): Display floating point
1551         registers in operands of exit instruction.  Print `$' before
1552         register names in operands of entry and exit instructions.
1553
1554 start-sanitize-tic80
1555 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
1556
1557         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1558         pairs for all predefined symbols recognized by the assembler.
1559         Also used by the disassembling routines.
1560         (tic80_symbol_to_value): New function.
1561         (tic80_value_to_symbol): New function.
1562         * tic80-dis.c (print_operand_control_register,
1563         print_operand_condition_code, print_operand_bitnum):
1564         Remove private tables and use tic80_value_to_symbol function.
1565
1566 end-sanitize-tic80
1567 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1568
1569         * d10v-dis.c (print_operand): Change address printing
1570         to correctly handle PC wrapping.  Fixes PR11490.
1571
1572 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
1573
1574         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1575         branches relaxable.
1576
1577 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
1578
1579         * mips-dis.c (print_insn_mips16): Set insn_info information.
1580         (print_mips16_insn_arg): Likewise.
1581
1582         * mips-dis.c (print_insn_mips16): Better handling of an extend
1583         opcode followed by an instruction which can not be extended.
1584
1585 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
1586
1587         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1588         coldfire moveb instruction to not allow an address register as
1589         destination.  Although the documentation does not indicate that
1590         this is invalid, experiments uncovered unexpected behavior.
1591         Added a comment explaining the situation.  Thanks to Andreas
1592         Schwab for pointing this out to me.
1593
1594 start-sanitize-tic80
1595 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
1596
1597         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1598         entries are presorted so that entries with the same mnemonic are
1599         adjacent to each other in the table.  Sort the entries for each
1600         instruction so that this is true.
1601
1602 end-sanitize-tic80
1603 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1604
1605         * m68k-dis.c: Include <libiberty.h>.
1606         (print_insn_m68k): Sort the opcode table on the most significant
1607         nibble of the opcode.
1608
1609 start-sanitize-tic80
1610 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
1611
1612         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1613         "vsub", "vst", "xnor", and "xor" instructions.
1614         (V_a1): Renamed from V_a, msb of accumulator reg number.
1615         (V_a0): Add macro, lsb of accumulator reg number.
1616
1617 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
1618
1619         * tic80-dis.c (print_insn_tic80): Broke excessively long
1620         function up into several smaller ones and arranged for
1621         the instruction printing function to be callable recursively
1622         to print vector instructions that have both a load and a
1623         math instruction packed into a single opcode.
1624         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1625         to explain why it comes after the other vector opcodes.
1626
1627 end-sanitize-tic80
1628 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
1629
1630         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1631         move insns to handle immediate operands.
1632
1633 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1634
1635         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1636         fix operand mask in the "moveml" entries for the coldfire.
1637
1638 start-sanitize-tic80
1639 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
1640
1641         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1642         New macros for building vector instruction opcodes.
1643         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1644         FMT_LI, which were unused.  The field is now a flags field.
1645         Remove some opcodes that are possible, but illegal, such
1646         as long immediate instructions with doubles for immediate
1647         values.  Add "vadd" and "vld" instructions.
1648
1649 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
1650
1651         * tic80-opc.c (tic80_operands): Reorder some table entries to make
1652         the order more logical.  Move the shift alias instructions ("rotl",
1653         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1654         interspersed with the regular sr.x and sl.x instructions.  Add
1655         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1656         "sub", "subu", "swcr", and "trap".
1657
1658 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
1659
1660         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1661         (OFF_SL_PC): Renamed from OFF_SL.
1662         (OFF_SS_BR): New operand type for base relative operand.
1663         (OFF_SL_BR): New operand type for base relative operand.
1664         (REG_BASE): New operand type for base register operand.
1665         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1666         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1667         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1668         instructions.
1669         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1670         10 char field, padded with spaces on rhs, rather than a string
1671         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
1672         than old TIC80_OPERAND_RELATIVE.  Add support for new
1673         TIC80_OPERAND_BASEREL flag bit.
1674
1675 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
1676
1677         * tic80-dis.c (print_insn_tic80): Print floating point operands
1678         as floats.
1679         * tic80-opc.c (SPFI): Add single precision floating point
1680         immediate operand type.
1681         (ROTATE): Add rotate operand type for shifts.
1682         (ENDMASK): Add for shifts.
1683         (n): Macro for the 'n' bit.
1684         (i): Macro for the 'i' bit.
1685         (PD): Macro for the 'PD' field.
1686         (P2): Macro for the 'P2' field.
1687         (P1): Macro for the 'P1' field.
1688         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1689         "fcmp", and "fdiv".
1690
1691 end-sanitize-tic80
1692 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
1693
1694         * mn10200-dis.c (disassemble): Mask off unwanted bits after
1695         adding in current address for pc-relative operands.
1696
1697 start-sanitize-tic80
1698 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
1699
1700         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1701         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1702         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1703         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1704         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1705         REG_BASE_M_SI, REG_BASE_M_LI respectively.
1706         (REG_SCALED, LSI_SCALED): New operand types.
1707         (E): New macro for 'E' bit at bit 27.
1708         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1709         opcodes, including the various size flavors (b,h,w,d) for
1710         the direct load and store instructions.
1711
1712 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
1713
1714         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1715         in an instruction.
1716         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1717         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1718         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1719         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1720         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1721         masks with "MASK_* & ~M_*" to get the M bit reset.
1722         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1723
1724 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
1725
1726         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1727         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
1728         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1729         form.
1730         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1731         CC, SICR, and LICR table entries.
1732         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1733         "bcnd", and "brcr" opcodes.
1734
1735 end-sanitize-tic80
1736 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
1737
1738         * ppc-opc.c (powerpc_operands): Make comment match the
1739         actual fields (no shift field).
1740         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1741 start-sanitize-tic80
1742         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1743         partial implementation, work in progress.
1744         * tic80-opc.c (tic80_operands): Begin construction operands table.
1745         (tic80_opcodes): Continue populating opcodes table and start
1746         filling in the operand indices.
1747         (tic80_num_opcodes): Add this.
1748 end-sanitize-tic80
1749
1750 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
1751
1752         * m68k-opc.c: Add #B case for moveq.
1753
1754 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
1755
1756         * mn10300-dis.c (disassemble): Make sure all variables are initialized
1757         before they are used.
1758
1759 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
1760
1761         * v850-opc.c (v850_opcodes): Put curly-braces around operands
1762         for "breakpoint" instruction.
1763
1764 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
1765
1766         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1767         (dep): Use ALL_CFLAGS rather than CFLAGS.
1768
1769 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1770
1771         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1772         flag.
1773
1774 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
1775
1776         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1777 start-sanitize-tic80
1778         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1779 end-sanitize-tic80
1780
1781 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1782
1783         * mips16-opc.c: Add "abs".
1784
1785 start-sanitize-tic80
1786 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
1787
1788         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1789         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1790         (disassembler): Add bfd_arch_tic80 support to set disassemble
1791         to print_insn_tic80.
1792         * tic80-dis.c (print_insn_tic80): Add stub.
1793
1794 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
1795
1796         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1797         * configure: Regenerate with autoconf.
1798         * tic80-dis.c: Add file.
1799         * tic80-opc.c: Add file.
1800
1801 end-sanitize-tic80
1802 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1803
1804         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
1805
1806 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
1807
1808         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1809         (mn10200_opcodes): Use it for some logicals and btst insns.
1810         Add "break" and "trap" instructions.
1811
1812         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1813
1814         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1815
1816 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1817
1818         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1819         relative load or add now depends upon whether the instruction is
1820         in a delay slot.
1821
1822 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
1823
1824         * mn10200-dis.c: Finish writing disassembler.
1825         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1826         Fix mask for "jmp (an)".
1827
1828         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1829         handle endianness issues for mn10300.
1830
1831         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1832
1833 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
1834
1835         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1836         instruction.  Fix opcode field for "movb (imm24),dn".
1837
1838         * mn10200-opc.c (mn10200_operands): Fix insertion position
1839         for DI operand.
1840
1841 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
1842
1843         * mn10200-opc.c: Create mn10200 opcode table.
1844         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
1845         but moving along nicely.
1846
1847 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1848
1849         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
1850
1851 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
1852
1853         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1854         specifiers for fmovem* instructions.
1855
1856 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1857
1858         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1859
1860 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
1861
1862         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1863         with dsrl.
1864
1865 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1866
1867         * mn10300-opc.c: Add some comments explaining the various
1868         operands and such.
1869
1870         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1871
1872 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1873
1874         * m68k-dis.c (print_insn_arg): Handle new < and > operand
1875         specifiers.
1876
1877         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1878         operand specifiers in fmovm* instructions.
1879
1880 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
1881
1882         * ppc-opc.c (insert_li): Give an error if the offset has the two
1883         least significant bits set.
1884
1885 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1886
1887         * mips-dis.c (print_insn_mips16): Separate the instruction from
1888         the arguments with a tab, not a space.
1889
1890 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
1891
1892         * mn10300-dis.c (disasemble): Finish conversion to '$' as
1893         register prefix.
1894
1895         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1896         mov am,(imm32,sp).
1897
1898 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
1899
1900         * configure: Rebuild with autoconf 2.12.
1901
1902         Add support for mips16 (16 bit MIPS implementation):
1903         * mips16-opc.c: New file.
1904         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1905         (mips16_reg_names): New static array.
1906         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1907         after seeing a 16 bit symbol.
1908         (print_insn_little_mips): Likewise.
1909         (print_insn_mips16): New static function.
1910         (print_mips16_insn_arg): New static function.
1911         * mips-opc.c: Add jalx instruction.
1912         * Makefile.in (mips16-opc.o): New target.
1913         * configure.in: Use mips16-opc.o for bfd_mips_arch.
1914         * configure: Rebuild.
1915
1916 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
1917
1918         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1919         operand specifiers in *save, *restore and movem* instructions.
1920
1921         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1922         the coldfire.
1923
1924         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1925         register operands for immediate arithmetic, not, neg, negx, and
1926         set according to condition instructions.
1927
1928         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1929         specifier of the effective-address operand in immediate forms of
1930         arithmetic instructions.  The specifier for the immediate operand
1931         notes how and where the constant will be stored.
1932
1933 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
1934
1935         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1936         opcode.
1937
1938         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1939         register prefix.
1940
1941         * mn10300-dis.c (disassemble): Prefix registers with '%'.
1942
1943 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
1944
1945         * mn10300-dis.c (disassemble): Handle register lists.
1946
1947         * mn10300-opc.c: Fix handling of register list operand for
1948         "call", "ret", and "rets" instructions.
1949
1950         * mn10300-dis.c (disassemble): Print PC-relative and memory
1951         addresses symbolically if possible.
1952         * mn10300-opc.c: Distinguish between absolute memory addresses,
1953         pc-relative offsets & random immediates.
1954
1955         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1956         in 7 byte insns.
1957         (disassemble): Handle SPLIT and EXTENDED operands.
1958
1959 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
1960
1961         * mn10300-dis.c: Rough cut at printing some operands.
1962
1963         * mn10300-dis.c: Start working on disassembler support.
1964         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1965
1966         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1967         list.
1968         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1969
1970 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1971
1972         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1973
1974 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
1975
1976         * mn10300-opc.c (mn10300_opcodes): Demand parens around
1977         register argument is calls and jmp instructions.
1978
1979 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
1980
1981         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1982         getx operand.  Fix opcode for mulqu imm,dn.
1983
1984 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
1985
1986         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1987         in MN10300_OPERAND_SPLIT operands for how many bits
1988         appear in the basic insn word.  Add IMM32_HIGH24,
1989         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1990         (mn10300_opcodes): Use new operands as needed.
1991
1992         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1993         for bset, bclr, btst instructions.
1994         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1995
1996         * mn10300-opc.c (mn10300_operands): Remove many redundant
1997         operands.  Update opcode table as appropriate.
1998         (IMM32): Add MN10300_OPERAND_SPLIT flag.
1999         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2000
2001 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
2002
2003         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2004         operands (for indexed load/stores).  Fix bitpos for DI
2005         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2006         few instructions that insert immediates/displacements in the
2007         middle of the instruction.  Add IMM8E for 8 bit immediate in
2008         the extended part of an instruction.
2009         (mn10300_operands): Use new opcodes as appropriate.
2010
2011 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2012
2013         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2014         sequential so the assembler never parallelizes it with
2015         other instructions.
2016
2017 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
2018
2019         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2020         a data/address register that appears in register field 0
2021         and register field 1.
2022         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2023
2024 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
2025
2026         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2027         standard disassembly.
2028
2029         * alpha-opc.c (alpha_operands): Rearrange flags slot.
2030         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2031         Recategorize PALcode instructions.
2032
2033 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
2034
2035         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2036
2037 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
2038
2039         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2040         there are no operand types.
2041
2042 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
2043
2044         * v850-opc.c (D9_RELAX): Renamed from D9, all references
2045         changed.
2046         (v850_operands): Make sure D22 immediately follows D9_RELAX.
2047
2048 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
2049
2050         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2051
2052 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
2053
2054         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2055         and sst.w instructions.
2056
2057         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2058         "bCC"instructions).
2059
2060 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2061
2062         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2063         and the arguments.
2064
2065 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
2066
2067         * ppc-opc.c (PPCPWR2): Define.
2068         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2069         it.
2070
2071 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
2072
2073         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2074         field for movhu instruction.
2075
2076         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2077         cast value to "long" not "signed long" to keep hpux10
2078         compiler quiet.
2079
2080 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
2081
2082         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2083         for mov (abs16),DN.
2084
2085         * mn10300-opc.c (FMT*): Remove definitions.
2086
2087         * mn10300-opc.c (mn10300_opcodes): Fix destination register
2088         for shift-by-register opcodes.
2089
2090         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2091         into [AD][MN][01] for encoding the position of the register
2092         in the opcode.
2093
2094 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
2095
2096         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2097         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2098
2099 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
2100
2101         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2102         Fix various typos.  Add "PAREN" operand.
2103         (MEM, MEM2): Define.
2104         (mn10300_opcodes): Surround all memory addresses with "PAREN"
2105         operands.  Fix several typos.
2106
2107         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2108         changes.
2109
2110 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
2111
2112         * mn10300-opc.c (FMT_XX): Renumber starting at one.
2113         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
2114         at this time.
2115         (mn10300_opcodes): Break opcode format out into its own field.
2116         Update many operand fields to deal with signed vs unsigned
2117         issues.  Fix one or two typos in the "mov" instruction
2118         opcode, mask and/or operand fields.
2119
2120 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2121
2122         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2123         m68851 wasn't reset.
2124
2125 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
2126
2127         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2128         all opcodes.  Very rough cut at operands for all opcodes.
2129
2130         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2131         opcode table.
2132
2133 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
2134
2135         * mn10200-opc.c, mn10300-opc.c: New files.
2136         * mn10200-dis.c, mn10300-dis.c: New files.
2137         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2138         * disassemble.c: Break mn10x00 support into 10200 and 10300
2139         support.
2140         * configure.in: Likewise.
2141         * configure: Rebuilt.
2142
2143 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
2144
2145         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2146
2147 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
2148
2149         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2150         MN10x00 processors.
2151         * disassemble (ARCH_mn10x00): Define.
2152         (disassembler): Handle bfd_arch_mn10x00.
2153         * configure.in: Recognize bfd_mn10x00_arch.
2154         * configure: Rebuilt.
2155
2156 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
2157
2158         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
2159         accordingly.  Don't declare functions using op_rtn.
2160
2161 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
2162
2163         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
2164         params to be more standard.
2165         * (disassemble):  Print absolute addresses and symbolic names for
2166         branch and jump targets.
2167         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
2168         bit operands.
2169         * (v850_opcodes):  Add breakpoint insn.
2170
2171 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
2172
2173         * m68k-opc.c: Move the fmovemx data register cases before the
2174         other cases, so that they get recognized before the data register
2175         does gets treated as a degenerate register list.
2176
2177 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
2178
2179         * mips-opc.c: Add a case for "div" and "divu" with two registers
2180         and a destination of $0.
2181
2182 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
2183
2184         * mips-dis.c (print_insn_arg): Add prototype.
2185         (_print_insn_mips): Ditto.
2186
2187 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
2188
2189         * mips-dis.c (print_insn_arg): Print condition code registers as
2190         $fccN.
2191
2192 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
2193
2194         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2195
2196 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
2197
2198         * v850-dis.c (disassemble): Make static.  Provide prototype.
2199
2200 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
2201
2202         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2203         in range checks.
2204
2205 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
2206
2207         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2208         ']' characters into the output stream.
2209         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2210         Add "memop" field to all opcodes (for the disassembler).
2211         Reorder opcodes so that "nop" comes before "mov" and "jr"
2212         comes before "jarl".
2213
2214         * v850-dis.c (print_insn_v850): Fix typo in last change.
2215
2216         * v850-dis.c (print_insn_v850): Properly handle disassembling
2217         a two byte insn at the end of a memory region when the memory
2218         region's size is only two byte aligned.
2219
2220         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2221
2222         * v850-dis.c (v850_reg_names): Define.
2223         (v850_sreg_names, v850_cc_names): Likewise.
2224         (disassemble): Very rough cut at printing operands (unformatted).
2225
2226         * v850-opc.c (BOP_MASK): Fix.
2227         (v850_opcodes): Fix mask for jarl and jr.
2228
2229         * v850-dis.c: New file.  Skeleton for disassembler support.
2230         * Makefile.in Remove v850 references, they're not needed here.
2231         * configure.in: Add v850-dis.o when building v850 toolchains.
2232         * configure: Rebuilt.
2233         * disassemble.c (disassembler): Call v850 disassembler.
2234
2235         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2236         (insert_d8_6, extract_d8_6): New functions.
2237         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2238         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2239         Add D8_6.
2240         (IF4A, IF4B): Use "D7" instead of "D7S".
2241         (IF4C, IF4D): Use "D8_7" instead of "D8".
2242         (IF4E, IF4F): New.  Use "D8_6".
2243         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
2244         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
2245
2246         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2247         (v850_operands): Change D16 to D16_15, use special insert/extract
2248         routines.  New new D16 that uses the generic insert/extract code.
2249         (IF7A, IF7B): Use D16_15.
2250         (IF7C, IF7D): New.  Use D16.
2251         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2252
2253         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2254         message.  Issue an error if the branch offset is odd.
2255
2256         * v850-opc.c: Add notes about needing special insert/extract
2257         for all the load/store insns, except "ld.b" and "st.b".
2258
2259         * v850-opc.c (insert_d22, extract_d22): New functions.
2260         (v850_operands): Use insert_d22 and extract_d22 for
2261         D22 operands.
2262         (insert_d9): Fix range check.
2263
2264 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
2265
2266         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2267         and set bits field to D9 and D22 operands.
2268
2269 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
2270
2271         * v850-opc.c (v850_operands): Define SR2 operand.
2272         (v850_opcodes): "ldsr" uses R1,SR2.
2273
2274         * v850-opc.c (v850_opcodes): Fix opcode specs for
2275         sld.w, sst.b, sst.h, sst.w, and nop.
2276
2277 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
2278
2279         * v850-opc.c (v850_opcodes): Add null opcode to mark the
2280         end of the opcode table.
2281
2282 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2283
2284         * d10v-opc.c (pre_defined_registers): Added register pairs,
2285         "r0-r1", "r2-r3", etc.
2286
2287 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
2288
2289         * v850-opc.c (v850_operands): Make I16 be a signed operand.
2290         Create I16U for an unsigned 16bit mmediate operand.
2291         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2292
2293         * v850-opc.c (v850_operands): Define EP operand.
2294         (IF4A, IF4B, IF4C, IF4D): Use EP.
2295
2296         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2297         with immediate operand, "movhi".  Tweak "ldsr".
2298
2299         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2300         correct.  Get sld.[bhw] and sst.[bhw] closer.
2301
2302         * v850-opc.c (v850_operands): "not" is a two byte insn
2303
2304         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2305
2306         * v850-opc.c (v850_operands): D16 inserts at offset 16!
2307
2308         * v850-opc.c (two): Get order of words correct.
2309
2310         * v850-opc.c (v850_operands): I16 inserts at offset 16!
2311
2312         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2313         register source and destination operands.
2314         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2315
2316         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
2317         same thinko in "trap" opcode.
2318
2319         * v850-opc.c (v850_opcodes): Add initializer for size field
2320         on all opcodes.
2321
2322         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
2323         Add D8 for 8-bit unsigned field in short load/store insns.
2324         (IF4A, IF4D): These both need two registers.
2325         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
2326         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2327         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
2328         for "ldsr" and "stsr".
2329         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2330         is unsigned.
2331
2332         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2333         short store word (sst.w).
2334
2335 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2336
2337         * v850-opc.c (v850_operands): Added insert and extract fields,
2338         pointers to functions that handle unusual operand encodings.
2339
2340 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
2341
2342         * v850-opc.c (v850_opcodes): Enable "trap".
2343
2344         * v850-opc.c (v850_opcodes): Fix order of displacement
2345         and register for "set1", "clr1", "not1", and "tst1".
2346
2347 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
2348
2349         * v850-opc.c (v850_operands): Add "B3" support.
2350         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2351         and "tst1".
2352
2353         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2354
2355         * v850-opc.c: Close unterminated comment.
2356
2357 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
2358
2359         * v850-opc.c (v850_operands): Add flags field.
2360         (v850_opcodes): add move opcodes.
2361
2362 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
2363
2364         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2365         * configure: (bfd_v850v_arch) Add new case.
2366         * configure.in: (bfd_v850_arch) Add new case.
2367         * v850-opc.c: New file.
2368
2369 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
2370
2371         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2372
2373 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2374
2375         * d10v-opc.c: Add additional information to the opcode
2376         table to help determinine which instructions can be done
2377         in parallel.
2378
2379 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
2380
2381         * mpw-make.sed: Update editing of include pathnames to be
2382         more general.
2383
2384 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
2385
2386         * arm-opc.h: Added "bx" instruction definition.
2387
2388 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
2389
2390         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2391
2392 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2393
2394         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2395
2396 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2397
2398         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2399
2400 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
2401
2402         * makefile.vms: Update for alpha-opc changes.
2403
2404 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
2405
2406         * i386-dis.c (print_insn_i386): Actually return the correct value.
2407         (ONE, OP_ONE): #ifdef out; not used.
2408
2409 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2410
2411         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2412         Changed subi operand type to treat 0 as 16.
2413
2414 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
2415
2416         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
2417         <rose@netcom.com>.
2418
2419 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
2420
2421         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2422         memory transfer instructions. Add new format string entries %h and %s.
2423         * arm-dis.c: (print_insn_arm): Provide decoding of the new
2424         formats %h and %s.
2425
2426 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2427
2428         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2429         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2430
2431 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
2432
2433         * alpha-dis.c (print_insn_alpha_osf): Remove.
2434         (print_insn_alpha_vms): Remove.
2435         (print_insn_alpha): Make globally visible.  Chose the register
2436         names based on info->flavour.
2437         * disassemble.c: Always return print_insn_alpha for the alpha.
2438
2439 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2440
2441         * d10v-dis.c (dis_long): Handle unknown opcodes.
2442
2443 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2444
2445         * d10v-opc.c: Changes to support signed and unsigned numbers.
2446         All instructions with the same name that have long and short forms
2447         now end in ".l" or ".s".  Divs added.
2448         * d10v-dis.c: Changes to support signed and unsigned numbers.
2449
2450 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2451
2452         * d10v-dis.c: Change all functions to use info->print_address_func.
2453
2454 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2455
2456         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2457         move ccr/sr insns more strict so that the disassembler only
2458         selects them when the addressing mode is data register.
2459
2460 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2461         * d10v-opc.c (pre_defined_registers):  Declare.
2462         * d10v-dis.c (print_operand): Now uses pre_defined_registers
2463         to pick a better name for the registers.
2464
2465 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
2466
2467         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
2468         operands for fexpand and fpmerge.  From Christian Kuehnke
2469         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2470
2471 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
2472
2473         * alpha-dis.c (print_insn_alpha): No longer the user-visible
2474         print routine.  Take new regnames and cpumask arguments.
2475         Kill the environment variable nonsense.
2476         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
2477         (print_insn_alpha_vms): New function.  Do VMS style regnames.
2478         * disassemble.c (disassembler): Test bfd flavour to pick
2479         between OSF and VMS routines.  Default to OSF.
2480
2481 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
2482
2483         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2484         * configure: Rebuild.
2485         * Makefile.in (install): Use @INSTALL_SHLIB@.
2486
2487 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2488
2489         * configure: (bfd_d10v_arch) Add new case.
2490         * configure.in: (bfd_d10v_arch) Add new case.
2491         * d10v-dis.c: New file.
2492         * d10v-opc.c: New file.
2493         * disassemble.c (disassembler) Add entry for d10v.
2494
2495 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2496
2497         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2498         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2499
2500 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
2501
2502         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
2503         distinguish between variants of the instruction set.
2504         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
2505         distinguish between variants of the instruction set.
2506
2507 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
2508
2509         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
2510         the 8086 instruction set.
2511         * i386-dis.c:  General cleanups.  Make most things static.  Add
2512         prototypes.  Get rid of static variables aflags and dflags.  Pass
2513         them as args (to almost everything).
2514
2515 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
2516
2517         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2518
2519         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2520
2521         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2522         if the next arg is marked with SRC_IN_DST.  Gross.
2523
2524         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2525         we're looking for and find EXR.
2526
2527         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2528         if we're looking for KBIT and we don't find it.
2529
2530         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2531         for L_3 and L_2.
2532
2533         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2534         3bit immediate operands.
2535
2536 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2537
2538         * Released binutils 2.7.
2539
2540         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
2541         <kkaempf@progis.ac-net.de>.
2542
2543 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
2544
2545         * alpha-opc.c: Correct second case of "mov" to use OPRL.
2546
2547 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
2548
2549         * sparc-dis.c (print_insn_sparclite):  New routine to print
2550         sparclite instructions.
2551
2552 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2553
2554         * m68k-opc.c (m68k_opcodes): Add coldfire support.
2555
2556 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
2557
2558         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2559         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2560         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2561
2562 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
2563
2564         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2565         Use autoconf-set values.
2566         (docdir, oldincludedir): Removed.
2567         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2568
2569 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
2570
2571         * alpha-opc.c: New file.
2572         * alpha-opc.h: Remove.
2573         * alpha-dis.c: Complete rewrite to use new opcode table.
2574         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2575         * configure: Rebuild with autoconf 2.10.
2576         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2577         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2578         alpha-opc.h.
2579         (alpha-opc.o): New target.
2580
2581 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
2582
2583         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2584         Set imm_added_to_rs1 even if the source and destination register
2585         are not the same.
2586
2587         * sparc-opc.c: Add some two operand forms of the wr instruction.
2588
2589 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
2590
2591         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2592         to just "mode".
2593
2594         * disassemble.c (disassembler): Handle H8/S.
2595         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2596
2597 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
2598
2599         * sparc-opc.c: Add beq/teq as aliases for be/te.
2600
2601         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
2602         <sergei@msil.sps.mot.com>.
2603
2604 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
2605
2606         * makefile.vms: New file.
2607
2608         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2609
2610 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
2611
2612         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2613         regardless of plen.
2614
2615 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
2616
2617         * i386-dis.c (OP_OFF): Call append_prefix.
2618
2619 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2620
2621         * ppc-opc.c (instruction encoding macros): Add explicit casts to
2622         unsigned long to silence a warning from the Solaris PowerPC
2623         compiler.
2624
2625 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
2626
2627         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2628
2629 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
2630
2631         * sparc-dis.c (X_IMM,X_SIMM): New macros.
2632         (X_IMM13): Delete.
2633         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
2634         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2635         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
2636         cpush, cpusha, cpull sparclet insns.
2637
2638 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
2639
2640         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2641
2642 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
2643
2644         * sparc-opc.c: Set F_FBR on floating point branch instructions.
2645         Set F_FLOAT on other floating point instructions.
2646
2647 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2648
2649         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2650         registers.
2651         (powerpc_opcodes): Add 860/821 specific SPRs.
2652
2653 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
2654
2655         * configure.in: Permit --enable-shared to specify a list of
2656         directories.  Set and substitute BFD_PICLIST.
2657         * configure: Rebuild.
2658         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
2659         uses.  Set to @BFD_PICLIST@.
2660
2661 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
2662
2663         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2664         not "abs", which may be needed for the absolute in something
2665         like btst #0,@10:8.  Print L_3 immediates separately from other
2666         immediates.  Change ABSMOV reference to ABS8MEM.
2667
2668 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
2669
2670         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2671         (current_arch_mask): New static global.
2672         (compute_arch_mask): New static function.
2673         (print_insn_sparc): Delete sparc_v9_p.  New static local
2674         current_mach.  Resort opcode table if current_mach changes.
2675         Generalize "insn not supported" test.
2676         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2677         Delete test for v9/!v9.
2678         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2679         (v6notlet): Define.
2680         (brfc): Split into CBR and FBR for coprocessor/fp branches.
2681         (brfcx): Renamed to FBRX.
2682         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
2683         coprocessor mnemonics are not supported on the sparclet).
2684         (condf): Renamed to CONDF.
2685         (SLCBCC2): Delete F_ALIAS flag.
2686
2687 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
2688
2689         * sparc-opc.c (sparc_opcodes): rd must be 0 for
2690         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
2691
2692 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
2693
2694         * Makefile.in (config.status): Depend upon BFD VERSION file, so
2695         that the shared library version number is set correctly.
2696
2697 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
2698
2699         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
2700         Miles Bader <miles@gnu.ai.mit.edu>.
2701         * configure: Rebuild.
2702
2703 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
2704
2705         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2706         malloc.
2707
2708 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
2709
2710         * configure: Rebuild with autoconf 2.8.
2711
2712 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2713
2714         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2715         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2716
2717 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
2718
2719         * configure.in: Don't set SHLIB or SHLINK to an empty string,
2720         since they appear as targets in Makefile.in.
2721         * configure: Rebuild.
2722
2723 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
2724
2725         * mpw-make.sed: Edit out shared library support bits.
2726
2727 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
2728
2729         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2730         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2731         (sparc_opcodes): Add sparclet insns.
2732         (sparclet_cpreg_table): New static local.
2733         (sparc_{encode,decode}_sparclet_cpreg): New functions.
2734         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2735
2736 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
2737
2738         * i386-dis.c (index16): New static variable.
2739         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2740         other way around.
2741         (OP_indirE): Return result of OP_E.
2742         (OP_E): Check for 16 bit addressing mode, and disassemble
2743         correctly.  Optimised 32 bit case a little.  Don't print
2744         "(base,index,scale)" when sib specifies only an offset.
2745
2746 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
2747
2748         * configure.in: Set and substitute SHLIB_DEP.
2749         * configure: Rebuild.
2750         * Makefile.in (SHLIB_DEP): New variable.
2751         (LIBIBERTY_LISTS, BFD_LIST): New variables.
2752         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
2753         COMMON_SHLIB, add them to piclist with appropriate modifications.
2754         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
2755         here: just use piclist.
2756
2757 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
2758
2759         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2760         (print_insn_sparc): Rewrite v9/not-v9 tests.
2761         (compare_opcodes): Likewise.
2762         * sparc-opc.c (MASK_<ARCH>): Define.
2763         (v6,v7,v8,sparclite,v9,v9a): Redefine.
2764         (sparclet,v6notv9): Define.
2765         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
2766         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2767
2768 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
2769
2770         * configure.in: Call AC_PROG_CC before configure.host.
2771         * configure: Rebuild.
2772
2773         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2774
2775 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
2776
2777         * i386-dis.c (onebyte_has_modrm): New static array.
2778         (twobyte_has_modrm): New static array.
2779         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2780
2781 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2782
2783         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2784         $(SHLINK).
2785
2786 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2787
2788         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2789         doesn't conflict.
2790
2791 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2792
2793         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2794         m68010up, not just m68020up | cpu32.
2795
2796         * Makefile.in (SONAME): New variable.
2797         ($(SHLINK)): Make a link to the transformed name, as well.
2798         (stamp-tshlink): New target.
2799         (install): Skip stamp-tshlink during install.
2800
2801 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2802
2803         * configure.in: Call AC_ARG_PROGRAM.
2804         * configure: Rebuild.
2805         * Makefile.in (program_transform_name): New variable.
2806         (install): Transform library name before installing it.
2807
2808 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
2809
2810         * i960-dis.c (mem): Add HX dcinva instruction.
2811
2812         Support for building as a shared library, based on patches from
2813         Alan Modra <alan@spri.levels.unisa.edu.au>:
2814         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2815         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2816         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2817         * configure: Rebuild.
2818         * Makefile.in (ALLLIBS): New variable.
2819         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2820         (COMMON_SHLIB, SHLINK): New variables.
2821         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2822         (STAGESTUFF): Remove variable.
2823         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2824         (stamp-piclist, piclist): New targets.
2825         ($(SHLIB), $(SHLINK)): New targets.
2826         ($(OFILES)): Depend upon stamp-picdir.
2827         (disassemble.o): Build twice if PICFLAG is set.
2828         (MOSTLYCLEAN): Add pic/*.o.
2829         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2830         (distclean): Remove pic and stamp-picdir.
2831         (install): Install shared libraries.
2832         (stamp-picdir): New target.
2833
2834 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
2835
2836         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2837         Print unknown instruction as "unknown", rather than in hex.
2838
2839 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
2840
2841         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2842
2843 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
2844
2845         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2846
2847 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
2848
2849         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2850         when necessary.  From Ulrich Drepper
2851         <drepper@myware.rz.uni-karlsruhe.de>.
2852
2853 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2854
2855         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2856         sparc_num_opcodes.  Update architecture enum values.
2857         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2858         (sparc_opcode_lookup_arch): New function.
2859         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2860         (sparc_opcodes): Add v9a shutdown insn.
2861
2862 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
2863
2864         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2865         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
2866         architecture.
2867         (print_insn_sparc64): Deleted.
2868         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2869         print_insn_sparc.
2870
2871         * sparc-opc.c (architecture_pname): Add v9a.
2872
2873 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
2874
2875         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2876         incorrectly defined as 0x16 when it should be 0x15.
2877         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2878         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
2879         excb (exception barrier) which is defined in the Alpha
2880         Architecture Handbook version 2.
2881         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2882         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
2883         disassembled as or, for example.
2884
2885 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
2886
2887         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2888         (_print_insn_mips): Change i from int to unsigned int.
2889
2890 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
2891
2892         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2893         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
2894
2895 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
2896
2897         * i386-dis.c: Added Pentium Pro instructions.
2898
2899 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2900
2901         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2902         being for Power2.
2903
2904 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2905
2906         * sh-opc.h (sh_nibble_type): Added REG_B.
2907         (sh_arg_type): Added A_REG_B.
2908         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2909         and stc.l opcodes.
2910         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2911
2912 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2913
2914         * disassemble.c (disassembler): Use new bfd_big_endian macro.
2915
2916 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2917
2918         * Makefile.in (distclean): Remove stamp-h.  From Ronald
2919         F. Guilmette <rfg@monkeys.com>.
2920
2921 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
2922
2923         From David Mosberger-Tang  <davidm@azstarnet.com>:
2924         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2925         instruction.
2926
2927 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2928
2929         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2930         (sh_table): Added many SH3 opcodes.
2931         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2932
2933 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2934
2935         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2936         (subco,subco.): Mark this PPC, not PPCCOM.
2937
2938 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
2939
2940         * configure: Rebuild with autoconf 2.7.
2941
2942 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2943
2944         * configure: Rebuild with autoconf 2.6.
2945
2946 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
2947
2948         * configure.in: Sort list of architectures.  Accept but do nothing
2949         for alliant, convex, pyramid, romp, and tahoe.
2950
2951 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
2952
2953         * a29k-dis.c (print_special): Change num to unsigned int.
2954
2955 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
2956
2957         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2958         shifting it.
2959
2960 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2961
2962         * configure.in: Call AC_CHECK_PROG to find and cache AR.
2963         * configure: Rebuilt.
2964
2965 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
2966
2967         * configure.in: Add case for bfd_i860_arch.
2968         * configure: Rebuild.
2969
2970 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2971
2972         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2973         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2974         (NEXTDOUBLE): Likewise.
2975         (print_insn_m68k): Don't match fmoveml if there is more than one
2976         register in the list.
2977         (print_insn_arg): Handle a place of '8' for a type of 'L'.
2978
2979 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2980
2981         * m68k-opc.c: Use #W rather than #w.
2982         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2983
2984 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2985
2986         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2987         and likewise for all the dbxx opcodes.
2988
2989 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
2990
2991         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2992
2993 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
2994
2995         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2996         the VR4100 specific instructions to the mips_opcodes structure.
2997
2998 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
2999
3000         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3001         ugly Metrowerks bug in CW6, is fixed in CW7.
3002
3003 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3004
3005         * ppc-opc.c (whole file): Add flags for common/any support.
3006
3007 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
3008
3009         * Makefile.in (BISON): Remove macro.
3010         (FLAGS_TO_PASS): Remove BISON.
3011
3012 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
3013
3014         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3015
3016         * m68k-dis.c (print_insn_m68k): Recognize all two-word
3017         instructions that take no args by looking at the match mask.
3018         (print_insn_arg): Always print "%" before register names.
3019         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3020         [case '_']: Don't print "@#" before address.
3021         [case 'J']: Use "%s" as format string, not register name.
3022         [case 'B']: Treat place == 'C' like 'l' and 'L'.
3023
3024 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
3025
3026         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3027         name correctly.
3028
3029 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
3030
3031         From David Mosberger-Tang  <davidm@azstarnet.com>
3032
3033         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3034         (alpha_insn_set): added definitions for VAX floating point
3035         instructions (Unix compilers don't generate these, but handcoded
3036         assembly might still use them).
3037
3038         * alpha-dis.c (print_insn_alpha): added support for disassembling
3039         the miscellaneous instructions in the Alpha instruction set.
3040
3041 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
3042
3043         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3044         no longer create sysdep.h, sed ppc-opc.c to work around a
3045         serious Metrowerks C bug.
3046         * mpw-make.in: Remove.
3047         * mpw-make.sed: New file, used by mpw-configure to edit
3048         Makefile.in into an MPW makefile.
3049
3050 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
3051
3052         * Makefile.in (maintainer-clean): New synonym for realclean.
3053
3054 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3055
3056         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3057         which use '0', '1', and '2' instead.  Specify the proper size for
3058         a pmove immediate operand.  Correct the pmovefd patterns to be
3059         moves to a register, not from a register.
3060         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3061
3062 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
3063
3064         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3065         %psr, %wim, %tbr as F_NOTV9.
3066
3067 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
3068
3069         * Makefile.in (Makefile): Just rebuild Makefile when running
3070         config.status.
3071         (config.h, stamp-h): New targets.
3072         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3073         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
3074         rebuilding config.h.
3075         * configure: Rebuild.
3076
3077         * mips-opc.c: Change unaligned loads and stores with "t,A"
3078         operands to use "t,A(b)".
3079
3080 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3081
3082         * sh-dis.c (print_insn_shx): Add F_FR0 support.
3083
3084 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3085
3086         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3087         until 3 instead of until 2.
3088
3089 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
3090
3091         * Makefile.in (ALL_CFLAGS): Define.
3092         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3093         (MOSTLYCLEAN): Add config.log.
3094         (distclean): Don't remove config.log.
3095         * configure.in: Substitute HDEFINES.
3096         * configure: Rebuild.
3097
3098 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3099
3100         * sh-opc.h (sh_arg_type): Add F_FR0.
3101         (sh_table, case fmac): Add F_FR0 as first argument.
3102
3103 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3104
3105         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3106
3107 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
3108
3109         * sparc-dis.c: Remove all references to NO_V9.
3110
3111 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
3112
3113         * aclocal.m4: Just include ../bfd/aclocal.m4.
3114         * configure: Rebuild.
3115
3116 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
3117
3118         * sparc-dis.c (X_DISP19): Define.
3119         (print_insn, case 'G'): Use it.
3120         (print_insn, case 'L'): Sign extend displacement.
3121
3122 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
3123
3124         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3125         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
3126         host_makefile_frag or frags.
3127         * aclocal.m4: New file.
3128         * configure: Rebuild.
3129         * Makefile.in (INSTALL): Set to @INSTALL@.
3130         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3131         (INSTALL_DATA): Set to @INSTALL_DATA@.
3132         (AR): Set to @AR@.
3133         (AR_FLAGS): Set to rc rather than qc.
3134         (CC): Define as @CC@.
3135         (CFLAGS): Set to @CFLAGS@.
3136         (@host_makefile_frag@): Remove.
3137         (config.status): Remove dependency upon @frags@.
3138
3139         * configure.in: ../bfd/config.bfd now just sets shell variables.
3140         Use them rather than looking through target Makefile fragments.
3141         * configure: Rebuild.
3142
3143 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3144
3145         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3146
3147 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
3148
3149         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3150         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3151         sparc64 insns.
3152
3153         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3154         (lookup_{name,value}): New functions.
3155         (prefetch_table): New static local.
3156         (sparc_{encode,decode}_prefetch): New functions.
3157         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3158
3159 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3160
3161         * sh-opc.h: Add blank lines to improve readabililty of sh3e
3162         instructions.
3163
3164 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3165
3166         * sh-dis.c: Correct comment on first line of file.
3167
3168 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
3169
3170         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3171
3172         * sparc-opc.c (asi, membar): New static locals.
3173         (sparc_{encode,decode}_{asi,membar}): New functions.
3174         (sparc_opcodes, membar insn): Fix.
3175         * sparc-dis.c (print_insn): Call sparc_decode_asi.
3176         Support decoding of membar masks.
3177         (X_MEMBAR): Define.
3178
3179 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
3180
3181         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3182
3183 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3184
3185         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3186         and likewise for the other branches.  Add bhs as an alias for bcc,
3187         and likewise for the size variants.  Add dbhs as an alias for
3188         dbcc.
3189
3190 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
3191
3192         * sh-opc.h (FP sts instructions): Update to match reality.
3193
3194 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
3195
3196         * m68k-dis.c: (fpcr_names): Add % before all register names.
3197         (reg_names): Likewise.
3198         (print_insn_arg): Don't explicitly print % before register names.
3199         Add % before register names in static array names.  In case 'r',
3200         print data registers as `@(Dn)', not `Dn@'.  When printing a
3201         memory address, don't print @# before it.
3202         (print_indexed): Change base_disp and outer_disp from int to
3203         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
3204         syntax.  Sign extend 8 byte displacement correctly.
3205         (print_base): Print using MIT syntax.  Print zpc when appropriate.
3206         Change parameter disp from int to bfd_vma.
3207
3208         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3209         for jsr.
3210
3211 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
3212
3213         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3214         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3215         * sh-opc.h (sh_arg_type): Add new operand types.
3216         (sh_table): Add new opcodes from SH3E Floating Point ISA.
3217
3218 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
3219
3220         * Makefile.in (distclean): Remove generated file config.h.
3221
3222 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
3223
3224         * Makefile.in (distclean): Remove generated file config.h.
3225
3226 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
3227
3228         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3229         Clean up tables.
3230         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3231         (opcode): Remove.
3232         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
3233         rather than numopcodes.  Use m68k_opcodes rather than removed
3234         opcode function.  Don't check F_ALIAS.
3235         (print_insn_arg): Change first parameter to be const char *.
3236         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3237         (m68k-opc.o): New target.
3238         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3239         * configure: Rebuild.
3240
3241 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
3242
3243         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3244         (opcode_bits, opcode_hash_table): New variables.
3245         (opcodes_initialized): Renamed from opcodes_sorted.
3246         (build_hash_table): New function.
3247         (is_delayed_branch): Use hash table.
3248         (print_insn): Renamed from print_insn_sparc, made static.
3249         Build and use hash table.  If !sparc64, ignore sparc64 insns,
3250         and vice-versa if sparc64.
3251         (print_insn_sparc, print_insn_sparc64): New functions.
3252         (compare_opcodes): Move sparc64 opcodes to end.
3253         Print commutative insns with constant second.
3254         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3255
3256 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
3257
3258         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
3259         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
3260         avoids printing a delay slot in a delay slot.
3261         * sh-opc.h (sh_table): Fully bracket last entry.
3262
3263 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
3264
3265         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3266
3267 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
3268
3269         * configure.in: Get host_makefile_frag from ${srcdir}.
3270
3271         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
3272         config.h from config.in.  Don't set up sysdep.h link.
3273         * sysdep.h: New file.
3274         * configure, config.in: New files, generated from configure.in.
3275         * Makefile.in: Updated to be processed autoconf-style.
3276         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
3277         (Makefile): Depend on config.status.
3278         (config.status): New rule.
3279         * configure.bat: Update Makefile substitutions.
3280
3281 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
3282
3283         * mips-opc.c (L1): Define.
3284         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3285         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3286         and wb.
3287
3288 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
3289
3290         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3291         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3292         have multiple add units but only a single logical unit.
3293
3294         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3295         shifted by 18, without any insertion or extraction function.
3296         (insert_cr, extract_cr): Remove.
3297
3298 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3299
3300         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3301         register names.
3302
3303 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
3304
3305         * mpw-config.in: Add sh and i386 configs, remove sparc config.
3306         * sh-opc.h: Add copyright.
3307
3308 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
3309
3310         * Makefile.in (crunch-m68k): Delete extra target accidentally
3311         checked in a while ago.
3312
3313 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3314
3315         * sh-opc.h (sh_table): Add SH3 support.
3316
3317 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
3318
3319         * sh-opc.h: Added bsrf and braf.
3320
3321 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3322
3323         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
3324         bogus [ls]fm{ea,fd} patterns.
3325
3326         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3327         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3328         initialize it from memory.  Make function static.
3329         (print_insn_{big,little}_arm): New functions.
3330         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3331         the correct endianness.
3332
3333 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
3334
3335         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3336         enum list.
3337
3338 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3339
3340         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3341         17th, so that it builds again using GCC as the compiler.
3342
3343 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3344
3345         * mips-dis.c (print_insn_little_mips): Cast return value from
3346         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3347         expects an unsigned long, and that might be fewer words of
3348         argument storage (e.g., if bfd_vma is long long on a 32-bit
3349         machine).
3350         (print_insn_big_mips): Likewise with bfd_getb32 value.
3351         (_print_insn_mips): Now static.
3352
3353 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
3354
3355         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3356         gcc memory hog problem with initializer is fixed.
3357
3358 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
3359
3360         Merge in support for Mac MPW as a host.
3361         (Old change descriptions retained for informational value.)
3362
3363         * mpw-config.in (archname): Compute from the config.
3364         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3365
3366         * mpw-config.in (target_arch): Compute from canonical target.
3367         (m68k, mips, powerpc, sparc): Add architectures.
3368         * mpw-make.in (disassemble.c.o): Add.
3369         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3370
3371         * mpw-config.in (BFD_MACHINES): Set to a default value.
3372         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3373
3374         * mpw-make.in (CSEARCH): Add extra-include to search path.
3375
3376         * mpw-config.in (varargs.h): Don't create.
3377         (sysdep.h): Create using forward-include.
3378         * mpw-make.in (CSEARCH): Add include/mpw to search path.
3379
3380         * mpw-config.in: New file, MPW version of configure.in.
3381         * mpw-make.in: New file, MPW version of Makefile.in.
3382
3383 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3384
3385         * alpha-dis.c (print_insn_alpha): Put empty statement after
3386         default label.
3387
3388 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
3389
3390         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3391         (low_sign_extend): Likewise.
3392         (get_field): Delete unused function.
3393         (set_field, deposit_14, deposit_21): Likewise.
3394
3395 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3396
3397         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
3398           (guy@netapp.com).
3399
3400 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
3401
3402         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
3403
3404         * alpha-opc.h (OSF_ASMCODE): define
3405         print pal-code names as defined in App C of the
3406         Alpha Architecture Reference Manual
3407
3408         * alpha-dis.c: cleaned up output
3409         print stylized code forms as defined in App A.4.3 of the
3410         Alpha Architecture Reference Manual
3411
3412 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
3413
3414         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
3415         `rfe'.
3416         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3417         'N', and 'M'.
3418
3419 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3420
3421         * m68k-dis.c (opcode): New function.  Returns address of opcode
3422         table entry given index, even if the opcode table was split to
3423         work around gcc bugs.
3424         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3425         directly.
3426         (BREAK_UP_BIG_DECL): Make secondary array static and const.
3427         (reg_names): Now const.
3428         (print_insn_arg): Arrays cacheFieldName and names now const.
3429         (print_indexed): Array scales now const.
3430
3431 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
3432
3433         * ppc-opc.c: Sort recently added instructions by minor opcode
3434         number within major opcode number.
3435
3436 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
3437
3438         * hppa-dis.c: Include libhppa.h.
3439
3440 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3441
3442         * mips-opc.c: Change dli to use M_DLI, and add dla.
3443
3444 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3445
3446         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
3447
3448 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
3449
3450         * mips-opc.c: Add r4650 mul instruction.
3451
3452 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
3453
3454         * mips-opc.c: Add uld and usd macros for unaligned double load and
3455         store.
3456
3457 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3458
3459         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3460         mfdcr, mtdcr, icbt, iccci.
3461
3462 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
3463
3464         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3465         signed char fields to shorts, more portable.
3466
3467 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
3468
3469         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3470         char fields as signed chars, since they may have negative values.
3471
3472 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3473
3474         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3475           (mycroft@netbsd.org).
3476
3477 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
3478
3479         From "Logg, Ed" <elogg@ea.com>:
3480         * ppc-opc.c (extract_bdm): Correct parenthezisation.
3481         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3482         value.
3483
3484 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
3485
3486         * ppc-opc.c: Changes based on patch from David Edelsohn
3487         <edelsohn@mhpcc.edu>.
3488         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3489         SPR.
3490         (FXM_MASK): Define.
3491         (insert_tbr): New static function.
3492         (extract_tbr): New static function.
3493         (XFXFXM_MASK, XFXM): Define.
3494         (XSPRBAT_MASK, XSPRG_MASK): Define.
3495         (powerpc_opcodes): Add instructions to access special registers by
3496         name.  Add mtcr and mftbu.
3497
3498 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3499
3500         * mips-opc.c (P3): Define.
3501         (mips_opcodes): Add mad and madu.
3502
3503 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
3504
3505         * configure.in: Add W65 support.
3506         * disassemble.c: Likewise.
3507         * w65-opc.h, w65-dis.c: New files.
3508
3509 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
3510
3511         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3512         immediates.
3513
3514 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3515
3516         * mips-opc.c: Add dli as a synonym for li.
3517
3518 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
3519
3520         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3521         print something for reserved opcode values, even if it won't
3522         assemble again.
3523
3524         * mips-dis.c (_print_insn_mips): When initializing, shift right
3525         and mask, to avoid sign extension problems on the Alpha.
3526
3527         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3528         control registers.
3529
3530 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
3531
3532         * sh-opc.h (mov.l gbr): Get direction right.
3533         * sh-dis.c (print_insn_shx): New function.
3534         (print_insn_shl, print_insn_sh): Call print_insn_shx to
3535         print opcodes with right byte order.
3536
3537 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
3538
3539         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3540         to avoid conflicts with getopt.
3541
3542 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3543
3544         * hppa-dis.c (print_insn_hppa): Read the instruction using
3545         bfd_getb32, so that it works on a little endian or 64 bit host.
3546         Remove unused local variable op.
3547
3548 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3549
3550         * mips-opc.c: Use or instead of addu for pseudo-op move, since
3551         addu does not work correctly if -mips3.
3552
3553 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3554
3555         * a29k-dis.c (print_special): Add special register names defined
3556         on 29030, 29040 and 29050.
3557         (print_insn): Handle new operand type 'I'.
3558
3559 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3560
3561         * Makefile.in (INSTALL): Use top level install.sh script.
3562
3563 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3564
3565         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3566         that it works on a little endian host.
3567
3568 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3569
3570         * configure.in: Use ${config_shell} when running config.bfd.
3571
3572 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3573
3574         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3575
3576 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3577
3578         * a29k-dis.c (print_insn): Print the opcode.
3579
3580 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3581
3582         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3583
3584 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
3585
3586         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3587
3588 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3589
3590         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3591         which store a value into memory.
3592
3593 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3594
3595         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3596         * arm-dis.c, arm-opc.h: New files.
3597
3598 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
3599
3600         * Makefile.in (ns32k-dis.o): Add dependency.
3601         * ns32k-dis.c (print_insn_arg): Declare initialized local as
3602         string, not as array of chars.
3603
3604 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3605
3606         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3607
3608         * sparc-opc.c: Added sparclite extended FP operations, and
3609         versions of v9 impdep* instructions permitting specification of
3610         the OPF field.
3611
3612 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3613
3614         * i960-dis.c (reg_names): Now const.
3615         (struct sparse_tabent): New type, copied from array type in mem
3616         function.
3617         (ctrl): Local static array ctrl_tab now const.
3618         (cobr): Local static array cobr_tab now const.
3619         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
3620         static variable mem_tab no longer explicitly initialized.  Changed
3621         mem_init to const array of struct sparse_tabent.
3622         (reg): Local static variable reg_tab no longer explicitly
3623         initialized.  Changed reg_init to const array of struct
3624         sparse_tabent.
3625         (ea): Local static array scale_tab now const.
3626
3627         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3628         (REG_MAX): Updated.
3629
3630 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
3631
3632         * configure.bat: the disassember needs to be enabled for
3633         "objdump -d" to work in djgpp.
3634
3635 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3636
3637         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3638         (invalid_float): Enabled general version, doesn't require running
3639         on ns32k host.  Changed to take char* argument, and test for
3640         explicitly specified sizes, instead of using sizeof() on host CPU
3641         types.
3642         (INVALID_FLOAT): Cast first argument.
3643         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3644         list_P032, list_M032): Now const.
3645         (optlist, list_search): Made appropriate arguments now point to
3646         const.
3647         (print_insn_arg): Changed static array of one-character-string
3648         pointers into a static const array of characters; fixed sprintf
3649         statement accordingly.
3650
3651 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
3652
3653         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
3654         from distribution. A ns32k-dis.c from a previous distribution has
3655         been brought up to date and supports the new interface.
3656
3657         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3658
3659         * configure.in: add bfd_ns32k_arch target support.
3660
3661         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3662         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3663
3664 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
3665
3666         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3667         disassembly right.
3668
3669 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
3670
3671         * h8300-dis.c, mips-dis.c: Don't use true and false.
3672
3673 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
3674
3675         * configure.in: Change --with-targets to --enable-targets.
3676
3677 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3678
3679         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3680         opcodes to the first instruction with that opcode, to speed
3681         disassembly of large files.  From ralphc@pyramid.com (Ralph
3682         Campbell).
3683
3684 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3685
3686         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3687
3688 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
3689
3690         * configure.bat: update to latest makefile.in
3691
3692 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
3693
3694         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3695         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3696         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3697         slot insn is in a delay slot.
3698         * z8k-opc.h: (resflg): Fix patterns.
3699         * h8500-opc.h Fix CR insn patterns.
3700
3701 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3702
3703         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3704         "cmpl" before POWER versions, so that gas -many uses them.
3705
3706 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3707
3708         * disassemble.c: New file.
3709         * Makefile.in (OFILES): Add disassemble.o.
3710         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3711         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
3712         binutils/configure.in.
3713
3714         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3715         opcode being examined.
3716
3717 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3718
3719         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3720         (insert_ral, insert_ram, insert_ras): New functions.
3721         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3722         RAS for store with update.
3723
3724 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3725
3726         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
3727         (edelsohn@npac.syr.edu).
3728
3729 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3730
3731         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3732         immediate argument.
3733
3734 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
3735
3736         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3737
3738 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3739
3740         * ppc-opc.c (powerpc_operands): The signedp field has been
3741         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
3742         instead.  Add new operand SISIGNOPT.
3743         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3744         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3745         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3746         than signedp field.
3747
3748 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3749
3750         * i386-dis.c (struct private):  Renamed to dis_private. `private'
3751         is a reserved word for dynix cc.
3752
3753 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3754
3755         * configure.in: Change error message to refer to bfd/config.bfd
3756         rather than bfd/configure.in.
3757
3758 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
3759
3760         * ppc-opc.c: Define POWER2 as short alias flag.
3761         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3762         fsqrt.
3763
3764 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3765
3766         * i960-dis.c (print_insn_i960): Don't read a second word for
3767         opcodes 0, 1, 2 and 3.
3768
3769 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3770
3771         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3772
3773 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3774
3775         * m68881-ext.c: Removed; no longer used.
3776         * Makefile.in: Changed accordingly.
3777
3778         * m68k-dis.c (ext_format_68881): Don't declare.
3779         (print_insn_m68k): If an instruction uses place 'i', it uses at
3780         least four fixed bytes.
3781         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
3782         extended float, convert to double using floatformat_to_double, not
3783         ieee_extended_to_double, and fetch the data before converting it.
3784
3785 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3786
3787         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
3788         davidj@ICSI.Berkeley.EDU (David Johnson).
3789
3790 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3791
3792         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3793         PowerPC uses bdnz[l][a].
3794
3795 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3796
3797         * dis-buf.c, i386-dis.c:  Include sysdep.h.
3798
3799 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3800
3801         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3802
3803         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3804         by Motorola PowerPC 601 with PPC_OPCODE_601.
3805         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3806         Disassemble Motorola PowerPC 601 instructions as well as normal
3807         PowerPC instructions.
3808
3809 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3810
3811         * i960-dis.c (reg, mem): Just use a static array instead of
3812         calling xmalloc.
3813
3814 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3815
3816         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3817         condition name index if this is for a negated condition.
3818
3819         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3820         Floating point format for 'H' operand is backwards from normal
3821         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
3822         operands (fmpyadd and fmpysub), handle bizarre register
3823         translation correctly for single precision format.
3824
3825         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3826         or 'I' operands if the next format specifier is 'M' (fcmp
3827         condition completer).
3828
3829 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3830
3831         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3832         single number giving a bitmask for the MB and ME fields of an M
3833         form instruction.  Change NB to accept 32, and turn it into 0;
3834         also turn 0 into 32 when disassembling.  Seperated SH from NB.
3835         (insert_mbe, extract_mbe): New functions.
3836         (insert_nb, extract_nb): New functions.
3837         (SC_MASK): Mask out SA and LK bits.
3838         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3839         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
3840         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
3841         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3842         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3843         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
3844         (powerpc_macros): Define table of macro definitions.
3845         (powerpc_num_macros): Define.
3846
3847         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3848         if PPC_OPERAND_NEXT is set.
3849
3850 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3851
3852         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3853         char.  Retrieve contents using bfd_getl32 instead of shifting.
3854
3855 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3856
3857         * ppc-opc.c: New file.  Opcode table for PowerPC, including
3858         opcodes for POWER (RS/6000).
3859         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
3860         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3861         (CFILES): Add ppc-dis.c.
3862         (ppc-dis.o, ppc-opc.o): New targets.
3863         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3864
3865 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3866
3867         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3868         No space before 'u', 'f', or 'N'.
3869
3870 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3871
3872         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3873         farther than we should.
3874
3875         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3876
3877 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3878
3879         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3880
3881 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3882
3883         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3884         needs it, to prevent reading past the end of a section.
3885
3886 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3887
3888         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3889         Removed t,A case for la; always use t,A(b) case.
3890
3891 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3892
3893         From Ted Lemen <mellon@pepper.ncd.com>
3894         * mips-dis.c (print_insn_arg): Handle 'k'.
3895         * mips-opc.c: Make cache use k, not t.
3896
3897 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3898
3899         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
3900         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3901         FLOAT_FORMAT_CODE to put out floating point register names.
3902
3903 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3904
3905         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3906
3907 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3908
3909         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3910
3911 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3912
3913         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3914         larger than 32.  Moved dsxx32 variants first for disassembler.
3915
3916 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3917
3918         * z8kgen.c, z8k-opc.h: Add full lda information.
3919
3920 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
3921
3922         * hppa-dis.c (print_insn_hppa): Do not emit a space after
3923         movb instructions.  Any necessary space will be emitted by
3924         the code to handle nullification completers.
3925
3926 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3927
3928         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3929
3930 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3931
3932         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
3933         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
3934
3935 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3936
3937         * mips-opc.c: Correct lwu opcode value (book had it wrong).
3938
3939 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3940
3941         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3942         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3943
3944 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
3945
3946         * m88k-dis.c (m88kdis): comment change.  Remove space after
3947           printing mnemonic.
3948           (printop): handle new arg types DEC and XREG for m88110.
3949
3950 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
3951
3952         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3953         type for absolute branch addresses.  Delete special
3954         "ble" and "be" code in 'W' operand code.
3955
3956 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3957
3958         * mips-opc.c: Set hazard information correctly for branch
3959         likely instructions.
3960
3961 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3962
3963         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
3964         info->fprintf_func for printing and info->print_address_func for
3965         address output.
3966
3967 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3968
3969         * mips-opc.c: Set INSN_TRAP for tXX instructions.
3970
3971 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3972
3973         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3974         Corrected second case of "b" for disassembler.
3975
3976 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3977
3978         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
3979         to BFD swapping routines to correspond to BFD name changes.
3980
3981 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3982
3983         * mips-opc.c: Change div machine instruction to be z,s,t rather
3984         than s,t.  Change div macro to be d,v,t rather than d,s,t.
3985         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
3986         rem and remu which generates only the corresponding div
3987         instruction.  This is for compatibility with the MIPS assembler,
3988         which only generates the simple machine instruction when an
3989         explicit destination of $0 is used.
3990         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3991
3992 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3993
3994         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3995         WR_31 hazard for bal, bgezal, bltzal.
3996
3997 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3998
3999         * hppa-dis.c (print_insn_hppa): Use print function
4000         from within the disassemble_info, not fprintf_filtered.
4001
4002 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4003
4004         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
4005         Law, law@cs.utah.edu.)
4006
4007 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4008
4009         * mips-opc.c ("absu"): Removed.
4010         ("dabs"): Added.
4011
4012 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4013
4014         * mips-opc.c: Added r6000 and r4000 instructions and macros.
4015         Changed hazard information to distinguish between memory load
4016         delays and coprocessor load delays.
4017
4018 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4019
4020         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
4021
4022 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4023
4024         * configure.in: Don't pass cpu to config.bfd.
4025
4026 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4027
4028         * m88k-dis.c (m88kdis): Make class unsigned.
4029
4030 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
4031
4032         * alpha-dis.c (print_insn_alpha): One branch format case was
4033         missing the instruction name.
4034
4035 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4036
4037         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4038         Add the arch-specific auxiliary files.
4039         (OFILES): Remove the arch-specific auxiliary files
4040         and use BFD_MACHINES instead of DIS_LIBS.
4041         * configure.in: Set BFD_MACHINES based on --with-targets option.
4042
4043 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4044
4045         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
4046         for swc1.
4047
4048 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4049
4050         * sparc-opc.c: Change CONST to const to deal with gcc
4051         -Dconst=__const -traditional.
4052
4053 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4054
4055         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4056         coprocessor instructions out of #if 0, and made them use new
4057         argument type "C".
4058
4059 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4060
4061         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4062
4063 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
4064
4065         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4066         instruction, for use by the disassembler.
4067
4068         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
4069         hand-coded sign extensions that depended on 32-bit host ints.
4070         FIXME, we still depend on big-endian host bitfield ordering.
4071         (sparc_print_insn):  Set the insn_info_valid field, and the
4072         other fields that describe the instruction being printed.
4073
4074 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
4075
4076         * sparc-opc.c (call): Accept all 6 addressing modes valid for
4077         `jmp' instead of just one of them.
4078
4079 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4080
4081         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4082         (fput_fp_reg_r): Renamed from fput_reg_r.
4083         (fput_fp_reg): New function.
4084         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4085
4086         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4087
4088         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4089
4090 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4091
4092         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4093
4094         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4095         don't output a space.
4096
4097         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4098
4099 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
4100
4101         * mips-opc.c: New file, containing opcode table from
4102         ../include/opcode/mips.h.
4103         * Makefile.in: Add it.
4104
4105 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4106
4107         * m88k-dis.c: New file, moved in from gdb and changed to use the
4108         new dis-asm.h disassembler interface.
4109         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4110         (m88k-dis.o): New target.
4111
4112 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
4113
4114         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4115         argument string const char * to correspond to opcode/mips.h.
4116
4117 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
4118
4119         * mips-dis.c: Updated to account for name changes in new version
4120         of opcode/mips.h.
4121         * Makefile.in: Added header file dependencies.
4122
4123 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
4124
4125         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4126
4127 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4128
4129         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4130         extend, rather than shifts.
4131
4132 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
4133
4134         * Makefile.in: Undo 15 June change.
4135
4136 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
4137
4138         * m68k-dis.c (print_insn_arg):  Change return value to byte count
4139         or error code.
4140         * m68k-dis.c:  Re-write to detect invalid operands before
4141         printing anything, so we can handle this the same way we
4142         handle invalid opcodes.
4143
4144 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4145
4146         * sh-dis.c, sh-opc.h: Understand some more opcodes.
4147
4148 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
4149
4150         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4151         header files.
4152
4153 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4154
4155         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4156
4157         * configure.in: Do make sysdep.h link.
4158         * Makefile.in: Search ../include.  Don't search ../bfd.
4159
4160 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
4161
4162         Changes from Jeff Law, law@cs.utah.edu:
4163         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
4164         Do not print a space before the completers specified by
4165         'a' and 'd'.
4166
4167 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
4168
4169         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4170         defined, since gdb has been fixed.
4171
4172         Changes from Jeff Law, law@cs.utah.edu:
4173         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4174         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4175         be a *disassemble_info, not a *FILE.
4176         * hppa-dis.c: Support 'd', '!', and 'a'.
4177         * hppa-dis.c: Support 's' to extract a 2 bit space register.
4178         * hppa-dis.c: Delete cases which are no longer needed.
4179
4180 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
4181
4182         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4183
4184 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4185
4186         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4187         H8/300-H opcodes.
4188
4189 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
4190
4191         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4192         * configure.in:  No longer need to configure to get sysdep.h.
4193
4194 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
4195
4196         * Patches from Jeffrey Law <law@cs.utah.edu>.
4197         * hppa-dis.c: Support 'I', 'J', and 'K' in output
4198         templates for 1.1 FP computational instructions.
4199
4200 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4201
4202         * h8500-dis.c (print_insn_h8500): Address argument is type
4203         bfd_vma.
4204         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4205         Ditto.
4206
4207         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4208         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4209
4210         * sparc-dis.c (compare_opcodes): Move static declaration to
4211         top-level.
4212
4213 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4214
4215         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4216         instruction, remove unimp hack from 'l' argument.
4217
4218 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
4219
4220         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
4221         happy.
4222
4223 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
4224
4225         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4226         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4227         instructions.
4228
4229 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4230
4231         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
4232         arrays of string pointers to 2-d arrays of chars, to save
4233         space.
4234
4235 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
4236
4237         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4238         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4239
4240 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4241
4242         * hppa-dis.c: New file from Utah, adapted to new disassembler
4243         calling interface.
4244         * Makefile.in: Include it.
4245
4246 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4247
4248         * sh-dis.c, sh-opc.h: New files.
4249
4250 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4251
4252         * alpha-dis.c, alpha-opc.h: New files.
4253
4254 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4255
4256         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4257         value.
4258
4259 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
4260
4261         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4262
4263 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
4264
4265         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4266         const.
4267
4268 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
4269
4270         * sparc-dis.c: Use fprintf_func a few places where I forgot,
4271         and double percent signs a few places.
4272
4273         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4274
4275         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4276         Use info->print_address_func not print_address.
4277
4278         * dis-buf.c (generic_print_address): New function.
4279
4280 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4281
4282         * Makefile.in: Add sparc-dis.c.
4283         sparc-dis.c: New file, merges binutils and gdb versions as follows:
4284         From GDB:
4285             Add `add' instruction to the set that get checked
4286             for a preceding `sethi' in order to print an absolute address.
4287             * (print_insn):  Disassembly prefers real instructions.
4288             (is_delayed_branch):  Speed up.
4289             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
4290             Still missing some float ops, and needs testing.
4291             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4292             F_ALIAS.  Use printf, not fprintf, when not passing a file
4293             pointer...
4294             (compare_opcodes): Check that identical instructions have
4295             identical opcodes, complain otherwise.
4296         From binutils:
4297             * New 'm' arg.
4298             * Include reg_names.
4299         From neither:
4300             Use dis-asm.h/read_memory_func interface.
4301
4302 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
4303
4304         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4305           deliberately return non-zero to setjmp from longjmp.  Otherwise
4306           this code fails to compile.
4307
4308 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
4309
4310         * m68k-dis.c:  Fix prototype for fetch_arg().
4311
4312 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4313
4314         * dis-buf.c: New file, for new read_memory_func interface.
4315         Makefile.in (OFILES): Include it.
4316         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4317         Use new read_memory_func interface.
4318
4319 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4320
4321         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4322         * h8500-opc.h: Fix couple of opcodes.
4323
4324 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
4325
4326         * Makefile.in: add dvi & installcheck targets
4327
4328 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
4329
4330         * Makefile.in:  Update for h8500-dis.c.
4331
4332 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4333
4334         * h8500-dis.c, h8500-opc.h: New files
4335
4336 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
4337
4338         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
4339         ../include/dis-asm.h.
4340         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
4341         and ../gdb/m68k-pinsn.c).
4342         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
4343         and ../gdb/i386-pinsn.c).
4344         * m68881-ext.c:  New file.  Moved definition of
4345         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4346         * Makefile.in:  Adjust for new files.
4347         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
4348         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
4349         can be dis-assembled.
4350
4351 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4352
4353         * mips-dis.c (print_insn_arg): Now returns void.
4354
4355 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
4356
4357         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
4358         files that use the macros.
4359
4360 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4361
4362         * mips-dis.c: New file, from gdb/mips-pinsn.c.
4363         * Makefile.in (DIS_LIBS): Added mips-dis.o.
4364         (CFILES): Added mips-dis.c.
4365
4366 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4367
4368         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4369         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4370
4371 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
4372
4373         * Makefile.in:  Improve *clean rules.
4374         * configure.in:  Allow a default host.
4375
4376 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
4377
4378         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4379         files include other sysdep files
4380
4381 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4382
4383         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4384
4385 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
4386
4387         * configure.in:  For host support, use ../bfd/configure.host
4388         so it stays in sync with the ../bfd/hosts database.
4389
4390 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
4391
4392         * configure.in: use cpu-vendor-os triple instead of nested cases
4393
4394 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
4395
4396         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4397         *always* the wrong one.
4398
4399 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4400
4401         * z8kgen.c: added copyright info
4402
4403 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4404
4405         * z8k-dis.c (unparse_instr): prettier tabs
4406         * z8kgen.c -> z8k-opc.h: bug fixes in tables
4407
4408 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
4409
4410         * configure.in:  Add ncr* configuration.
4411         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
4412         picayune ANSI compilers happy.
4413
4414 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
4415
4416         * configure.in (i386):  Make i386 and i486 synonymous for now.
4417         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
4418
4419 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4420
4421         * Makefile.in (install): Fix typo.
4422
4423 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
4424
4425         * Makefile.in (make):  Remove obsolete crud.
4426         (sparc-opc.o):  Avoid Sun Make VPATH bug.
4427
4428 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
4429
4430         * Makefile.in: since there are no SUBDIRS, remove rule and
4431         references of subdir_do.
4432
4433 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4434
4435         * Makefile.in (install): Get the library name right here too.
4436         Don't install bfd.h, since it's unrelated to this library.  No
4437         subdirs to recurse into, either.
4438         (CFILES): The source file has a .c suffix, not .o.
4439
4440         * sparc-opc.c: New file, moved from BFD.
4441         * Makefile.in (OFILES): Build it.
4442
4443 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
4444
4445         * z8k-dis.c: fixed forward refferences of some declarations.
4446
4447 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
4448
4449         * Makefile.in: get the name of the library right
4450
4451 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4452
4453         * z8k-dis.c: knows how to disassemble z8k stuff
4454         * z8k-opc.h: new file full of z8000 opcodes
4455
4456 \f
4457 Local Variables:
4458 version-control: never
4459 End: