1 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
3 * makefile.vms: Remove 8 bit characters. Update to latest
6 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
8 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
10 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
12 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
13 (IMM24_PCREL): Likewise.
15 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
17 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
18 address for an extended PC relative instruction that is not a
21 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
23 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
27 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
29 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
30 (tic80_opcodes): Sort entries so that long immediate forms
31 come after short immediate forms, making it easier for
32 assembler to select the right one for a given operand.
35 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
37 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
39 (print_insn_mips16): Likewise.
42 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
44 * mips-opc.c: add r5900.
48 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
50 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
51 a symbol class that restricts translation to just that
52 class (general register, condition code, etc).
54 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
56 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
57 and REG_DEST_E for register operands that have to be
58 an even numbered register. Add REG_FPA for operands that
59 are one of the floating point accumulator registers.
60 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
61 (tic80_opcodes): Change entries that need even numbered
62 register operands to use the new operand table entries.
63 Add "or" entries that are identical to "or.tt" entries.
66 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
68 * mips16-opc.c: Add new cases of exit instruction for
70 * mips-dis.c (print_mips16_insn_arg): Display floating point
71 registers in operands of exit instruction. Print `$' before
72 register names in operands of entry and exit instructions.
75 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
77 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
78 pairs for all predefined symbols recognized by the assembler.
79 Also used by the disassembling routines.
80 (tic80_symbol_to_value): New function.
81 (tic80_value_to_symbol): New function.
82 * tic80-dis.c (print_operand_control_register,
83 print_operand_condition_code, print_operand_bitnum):
84 Remove private tables and use tic80_value_to_symbol function.
88 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
90 * d10v-dis.c (print_operand): Change address printing
91 to correctly handle PC wrapping. Fixes PR11490.
94 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
96 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
99 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
101 * mips-dis.c (print_insn_mips16): Set insn_info information.
102 (print_mips16_insn_arg): Likewise.
104 * mips-dis.c (print_insn_mips16): Better handling of an extend
105 opcode followed by an instruction which can not be extended.
107 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
109 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
110 coldfire moveb instruction to not allow an address register as
111 destination. Although the documentation does not indicate that
112 this is invalid, experiments uncovered unexpected behavior.
113 Added a comment explaining the situation. Thanks to Andreas
114 Schwab for pointing this out to me.
117 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
119 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
120 entries are presorted so that entries with the same mnemonic are
121 adjacent to each other in the table. Sort the entries for each
122 instruction so that this is true.
125 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
127 * m68k-dis.c: Include <libiberty.h>.
128 (print_insn_m68k): Sort the opcode table on the most significant
129 nibble of the opcode.
132 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
134 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
135 "vsub", "vst", "xnor", and "xor" instructions.
136 (V_a1): Renamed from V_a, msb of accumulator reg number.
137 (V_a0): Add macro, lsb of accumulator reg number.
139 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
141 * tic80-dis.c (print_insn_tic80): Broke excessively long
142 function up into several smaller ones and arranged for
143 the instruction printing function to be callable recursively
144 to print vector instructions that have both a load and a
145 math instruction packed into a single opcode.
146 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
147 to explain why it comes after the other vector opcodes.
150 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
152 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
153 move insns to handle immediate operands.
155 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
157 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
158 fix operand mask in the "moveml" entries for the coldfire.
161 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
163 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
164 New macros for building vector instruction opcodes.
165 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
166 FMT_LI, which were unused. The field is now a flags field.
167 Remove some opcodes that are possible, but illegal, such
168 as long immediate instructions with doubles for immediate
169 values. Add "vadd" and "vld" instructions.
171 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
173 * tic80-opc.c (tic80_operands): Reorder some table entries to make
174 the order more logical. Move the shift alias instructions ("rotl",
175 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
176 interspersed with the regular sr.x and sl.x instructions. Add
177 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
178 "sub", "subu", "swcr", and "trap".
180 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
182 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
183 (OFF_SL_PC): Renamed from OFF_SL.
184 (OFF_SS_BR): New operand type for base relative operand.
185 (OFF_SL_BR): New operand type for base relative operand.
186 (REG_BASE): New operand type for base register operand.
187 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
188 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
189 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
191 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
192 10 char field, padded with spaces on rhs, rather than a string
193 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
194 than old TIC80_OPERAND_RELATIVE. Add support for new
195 TIC80_OPERAND_BASEREL flag bit.
197 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
199 * tic80-dis.c (print_insn_tic80): Print floating point operands
201 * tic80-opc.c (SPFI): Add single precision floating point
202 immediate operand type.
203 (ROTATE): Add rotate operand type for shifts.
204 (ENDMASK): Add for shifts.
205 (n): Macro for the 'n' bit.
206 (i): Macro for the 'i' bit.
207 (PD): Macro for the 'PD' field.
208 (P2): Macro for the 'P2' field.
209 (P1): Macro for the 'P1' field.
210 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
214 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
216 * mn10200-dis.c (disassemble): Mask off unwanted bits after
217 adding in current address for pc-relative operands.
220 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
222 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
223 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
224 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
225 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
226 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
227 REG_BASE_M_SI, REG_BASE_M_LI respectively.
228 (REG_SCALED, LSI_SCALED): New operand types.
229 (E): New macro for 'E' bit at bit 27.
230 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
231 opcodes, including the various size flavors (b,h,w,d) for
232 the direct load and store instructions.
234 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
236 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
238 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
239 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
240 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
241 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
242 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
243 masks with "MASK_* & ~M_*" to get the M bit reset.
244 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
246 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
248 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
249 correctly. Add support for printing TIC80_OPERAND_BITNUM and
250 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
252 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
253 CC, SICR, and LICR table entries.
254 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
255 "bcnd", and "brcr" opcodes.
258 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
260 * ppc-opc.c (powerpc_operands): Make comment match the
261 actual fields (no shift field).
262 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
264 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
265 partial implementation, work in progress.
266 * tic80-opc.c (tic80_operands): Begin construction operands table.
267 (tic80_opcodes): Continue populating opcodes table and start
268 filling in the operand indices.
269 (tic80_num_opcodes): Add this.
272 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
274 * m68k-opc.c: Add #B case for moveq.
276 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
278 * mn10300-dis.c (disassemble): Make sure all variables are initialized
279 before they are used.
282 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
284 * v850-opc.c (v850_opcodes): Put curly-braces around operands
285 for "breakpoint" instruction.
288 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
290 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
291 (dep): Use ALL_CFLAGS rather than CFLAGS.
294 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
296 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
300 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
302 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
304 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
307 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
309 * mips16-opc.c: Add "abs".
312 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
314 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
315 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
316 (disassembler): Add bfd_arch_tic80 support to set disassemble
318 * tic80-dis.c (print_insn_tic80): Add stub.
320 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
322 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
323 * configure: Regenerate with autoconf.
324 * tic80-dis.c: Add file.
325 * tic80-opc.c: Add file.
329 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
331 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
334 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
336 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
337 (mn10200_opcodes): Use it for some logicals and btst insns.
338 Add "break" and "trap" instructions.
340 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
342 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
344 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
346 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
347 relative load or add now depends upon whether the instruction is
350 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
352 * mn10200-dis.c: Finish writing disassembler.
353 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
354 Fix mask for "jmp (an)".
356 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
357 handle endianness issues for mn10300.
359 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
361 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
363 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
364 instruction. Fix opcode field for "movb (imm24),dn".
366 * mn10200-opc.c (mn10200_operands): Fix insertion position
369 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
371 * mn10200-opc.c: Create mn10200 opcode table.
372 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
373 but moving along nicely.
375 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
377 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
379 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
381 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
382 specifiers for fmovem* instructions.
384 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
386 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
388 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
390 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
393 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
395 * mn10300-opc.c: Add some comments explaining the various
398 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
400 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
402 * m68k-dis.c (print_insn_arg): Handle new < and > operand
405 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
406 operand specifiers in fmovm* instructions.
408 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
410 * ppc-opc.c (insert_li): Give an error if the offset has the two
411 least significant bits set.
413 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
415 * mips-dis.c (print_insn_mips16): Separate the instruction from
416 the arguments with a tab, not a space.
418 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
420 * mn10300-dis.c (disasemble): Finish conversion to '$' as
423 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
426 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
428 * configure: Rebuild with autoconf 2.12.
430 Add support for mips16 (16 bit MIPS implementation):
431 * mips16-opc.c: New file.
432 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
433 (mips16_reg_names): New static array.
434 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
435 after seeing a 16 bit symbol.
436 (print_insn_little_mips): Likewise.
437 (print_insn_mips16): New static function.
438 (print_mips16_insn_arg): New static function.
439 * mips-opc.c: Add jalx instruction.
440 * Makefile.in (mips16-opc.o): New target.
441 * configure.in: Use mips16-opc.o for bfd_mips_arch.
442 * configure: Rebuild.
444 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
446 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
447 operand specifiers in *save, *restore and movem* instructions.
449 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
452 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
453 register operands for immediate arithmetic, not, neg, negx, and
454 set according to condition instructions.
456 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
457 specifier of the effective-address operand in immediate forms of
458 arithmetic instructions. The specifier for the immediate operand
459 notes how and where the constant will be stored.
461 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
463 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
466 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
469 * mn10300-dis.c (disassemble): Prefix registers with '%'.
471 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
473 * mn10300-dis.c (disassemble): Handle register lists.
475 * mn10300-opc.c: Fix handling of register list operand for
476 "call", "ret", and "rets" instructions.
478 * mn10300-dis.c (disassemble): Print PC-relative and memory
479 addresses symbolically if possible.
480 * mn10300-opc.c: Distinguish between absolute memory addresses,
481 pc-relative offsets & random immediates.
483 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
485 (disassemble): Handle SPLIT and EXTENDED operands.
487 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
489 * mn10300-dis.c: Rough cut at printing some operands.
491 * mn10300-dis.c: Start working on disassembler support.
492 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
494 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
496 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
499 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
501 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
504 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
506 * mn10300-opc.c (mn10300_opcodes): Demand parens around
507 register argument is calls and jmp instructions.
509 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
511 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
512 getx operand. Fix opcode for mulqu imm,dn.
514 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
516 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
517 in MN10300_OPERAND_SPLIT operands for how many bits
518 appear in the basic insn word. Add IMM32_HIGH24,
519 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
520 (mn10300_opcodes): Use new operands as needed.
522 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
523 for bset, bclr, btst instructions.
524 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
526 * mn10300-opc.c (mn10300_operands): Remove many redundant
527 operands. Update opcode table as appropriate.
528 (IMM32): Add MN10300_OPERAND_SPLIT flag.
529 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
531 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
533 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
534 operands (for indexed load/stores). Fix bitpos for DI
535 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
536 few instructions that insert immediates/displacements in the
537 middle of the instruction. Add IMM8E for 8 bit immediate in
538 the extended part of an instruction.
539 (mn10300_operands): Use new opcodes as appropriate.
542 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
544 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
545 sequential so the assembler never parallelizes it with
549 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
551 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
552 a data/address register that appears in register field 0
553 and register field 1.
554 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
556 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
558 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
559 standard disassembly.
561 * alpha-opc.c (alpha_operands): Rearrange flags slot.
562 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
563 Recategorize PALcode instructions.
566 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
568 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
571 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
573 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
574 there are no operand types.
577 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
579 * v850-opc.c (D9_RELAX): Renamed from D9, all references
581 (v850_operands): Make sure D22 immediately follows D9_RELAX.
584 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
586 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
589 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
591 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
592 and sst.w instructions.
594 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
598 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
600 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
603 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
605 * ppc-opc.c (PPCPWR2): Define.
606 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
609 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
611 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
612 field for movhu instruction.
615 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
616 cast value to "long" not "signed long" to keep hpux10
620 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
622 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
625 * mn10300-opc.c (FMT*): Remove definitions.
627 * mn10300-opc.c (mn10300_opcodes): Fix destination register
628 for shift-by-register opcodes.
630 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
631 into [AD][MN][01] for encoding the position of the register
634 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
636 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
637 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
639 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
641 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
642 Fix various typos. Add "PAREN" operand.
644 (mn10300_opcodes): Surround all memory addresses with "PAREN"
645 operands. Fix several typos.
647 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
650 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
652 * mn10300-opc.c (FMT_XX): Renumber starting at one.
653 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
655 (mn10300_opcodes): Break opcode format out into its own field.
656 Update many operand fields to deal with signed vs unsigned
657 issues. Fix one or two typos in the "mov" instruction
658 opcode, mask and/or operand fields.
660 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
662 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
665 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
667 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
668 all opcodes. Very rough cut at operands for all opcodes.
670 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
673 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
675 * mn10200-opc.c, mn10300-opc.c: New files.
676 * mn10200-dis.c, mn10300-dis.c: New files.
677 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
678 * disassemble.c: Break mn10x00 support into 10200 and 10300
680 * configure.in: Likewise.
681 * configure: Rebuilt.
683 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
685 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
687 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
689 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
691 * disassemble (ARCH_mn10x00): Define.
692 (disassembler): Handle bfd_arch_mn10x00.
693 * configure.in: Recognize bfd_mn10x00_arch.
694 * configure: Rebuilt.
696 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
698 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
699 accordingly. Don't declare functions using op_rtn.
702 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
704 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
705 params to be more standard.
706 * (disassemble): Print absolute addresses and symbolic names for
707 branch and jump targets.
708 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
710 * (v850_opcodes): Add breakpoint insn.
713 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
715 * m68k-opc.c: Move the fmovemx data register cases before the
716 other cases, so that they get recognized before the data register
717 does gets treated as a degenerate register list.
719 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
721 * mips-opc.c: Add a case for "div" and "divu" with two registers
722 and a destination of $0.
724 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
726 * mips-dis.c (print_insn_arg): Add prototype.
727 (_print_insn_mips): Ditto.
729 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
731 * mips-dis.c (print_insn_arg): Print condition code registers as
734 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
736 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
739 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
741 * v850-dis.c (disassemble): Make static. Provide prototype.
743 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
745 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
748 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
750 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
751 ']' characters into the output stream.
752 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
753 Add "memop" field to all opcodes (for the disassembler).
754 Reorder opcodes so that "nop" comes before "mov" and "jr"
757 * v850-dis.c (print_insn_v850): Fix typo in last change.
759 * v850-dis.c (print_insn_v850): Properly handle disassembling
760 a two byte insn at the end of a memory region when the memory
761 region's size is only two byte aligned.
763 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
765 * v850-dis.c (v850_reg_names): Define.
766 (v850_sreg_names, v850_cc_names): Likewise.
767 (disassemble): Very rough cut at printing operands (unformatted).
769 * v850-opc.c (BOP_MASK): Fix.
770 (v850_opcodes): Fix mask for jarl and jr.
772 * v850-dis.c: New file. Skeleton for disassembler support.
773 * Makefile.in Remove v850 references, they're not needed here
774 and they weren't being sanitized away.
775 * configure.in: Add v850-dis.o when building v850 toolchains.
776 * configure: Rebuilt.
777 * disassemble.c (disassembler): Call v850 disassembler.
779 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
780 (insert_d8_6, extract_d8_6): New functions.
781 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
782 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
784 (IF4A, IF4B): Use "D7" instead of "D7S".
785 (IF4C, IF4D): Use "D8_7" instead of "D8".
786 (IF4E, IF4F): New. Use "D8_6".
787 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
788 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
790 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
791 (v850_operands): Change D16 to D16_15, use special insert/extract
792 routines. New new D16 that uses the generic insert/extract code.
793 (IF7A, IF7B): Use D16_15.
794 (IF7C, IF7D): New. Use D16.
795 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
797 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
798 message. Issue an error if the branch offset is odd.
800 * v850-opc.c: Add notes about needing special insert/extract
801 for all the load/store insns, except "ld.b" and "st.b".
803 * v850-opc.c (insert_d22, extract_d22): New functions.
804 (v850_operands): Use insert_d22 and extract_d22 for
806 (insert_d9): Fix range check.
808 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
810 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
811 and set bits field to D9 and D22 operands.
813 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
815 * v850-opc.c (v850_operands): Define SR2 operand.
816 (v850_opcodes): "ldsr" uses R1,SR2.
818 * v850-opc.c (v850_opcodes): Fix opcode specs for
819 sld.w, sst.b, sst.h, sst.w, and nop.
821 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
823 * v850-opc.c (v850_opcodes): Add null opcode to mark the
824 end of the opcode table.
828 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
830 * d10v-opc.c (pre_defined_registers): Added register pairs,
831 "r0-r1", "r2-r3", etc.
835 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
837 * v850-opc.c (v850_operands): Make I16 be a signed operand.
838 Create I16U for an unsigned 16bit mmediate operand.
839 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
841 * v850-opc.c (v850_operands): Define EP operand.
842 (IF4A, IF4B, IF4C, IF4D): Use EP.
844 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
845 with immediate operand, "movhi". Tweak "ldsr".
847 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
848 correct. Get sld.[bhw] and sst.[bhw] closer.
850 * v850-opc.c (v850_operands): "not" is a two byte insn
852 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
854 * v850-opc.c (v850_operands): D16 inserts at offset 16!
856 * v850-opc.c (two): Get order of words correct.
858 * v850-opc.c (v850_operands): I16 inserts at offset 16!
860 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
861 register source and destination operands.
862 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
864 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
865 same thinko in "trap" opcode.
867 * v850-opc.c (v850_opcodes): Add initializer for size field
870 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
871 Add D8 for 8-bit unsigned field in short load/store insns.
872 (IF4A, IF4D): These both need two registers.
873 (IF4C, IF4D): Define. Use 8-bit unsigned field.
874 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
875 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
876 for "ldsr" and "stsr".
877 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
880 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
881 short store word (sst.w).
883 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
885 * v850-opc.c (v850_operands): Added insert and extract fields,
886 pointers to functions that handle unusual operand encodings.
888 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
890 * v850-opc.c (v850_opcodes): Enable "trap".
892 * v850-opc.c (v850_opcodes): Fix order of displacement
893 and register for "set1", "clr1", "not1", and "tst1".
895 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
897 * v850-opc.c (v850_operands): Add "B3" support.
898 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
901 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
903 * v850-opc.c: Close unterminated comment.
905 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
907 * v850-opc.c (v850_operands): Add flags field.
908 (v850_opcodes): add move opcodes.
910 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
912 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
913 * configure: (bfd_v850v_arch) Add new case.
914 * configure.in: (bfd_v850_arch) Add new case.
915 * v850-opc.c: New file.
918 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
920 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
923 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
925 * d10v-opc.c: Add additional information to the opcode
926 table to help determinine which instructions can be done
930 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
932 * mpw-make.sed: Update editing of include pathnames to be
935 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
937 * arm-opc.h: Added "bx" instruction definition.
939 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
941 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
944 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
946 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
948 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
950 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
953 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
955 * makefile.vms: Update for alpha-opc changes.
957 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
959 * i386-dis.c (print_insn_i386): Actually return the correct value.
960 (ONE, OP_ONE): #ifdef out; not used.
963 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
965 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
966 Changed subi operand type to treat 0 as 16.
969 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
971 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
974 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
976 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
977 memory transfer instructions. Add new format string entries %h and %s.
978 * arm-dis.c: (print_insn_arm): Provide decoding of the new
982 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
984 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
985 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
988 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
990 * alpha-dis.c (print_insn_alpha_osf): Remove.
991 (print_insn_alpha_vms): Remove.
992 (print_insn_alpha): Make globally visible. Chose the register
993 names based on info->flavour.
994 * disassemble.c: Always return print_insn_alpha for the alpha.
997 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
999 * d10v-dis.c (dis_long): Handle unknown opcodes.
1001 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1003 * d10v-opc.c: Changes to support signed and unsigned numbers.
1004 All instructions with the same name that have long and short forms
1005 now end in ".l" or ".s". Divs added.
1006 * d10v-dis.c: Changes to support signed and unsigned numbers.
1008 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1010 * d10v-dis.c: Change all functions to use info->print_address_func.
1013 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1015 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1016 move ccr/sr insns more strict so that the disassembler only
1017 selects them when the addressing mode is data register.
1020 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1021 * d10v-opc.c (pre_defined_registers): Declare.
1022 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1023 to pick a better name for the registers.
1026 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1028 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1029 operands for fexpand and fpmerge. From Christian Kuehnke
1030 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1032 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1034 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1035 print routine. Take new regnames and cpumask arguments.
1036 Kill the environment variable nonsense.
1037 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1038 (print_insn_alpha_vms): New function. Do VMS style regnames.
1039 * disassemble.c (disassembler): Test bfd flavour to pick
1040 between OSF and VMS routines. Default to OSF.
1042 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1044 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1045 * configure: Rebuild.
1046 * Makefile.in (install): Use @INSTALL_SHLIB@.
1049 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1051 * configure: (bfd_d10v_arch) Add new case.
1052 * configure.in: (bfd_d10v_arch) Add new case.
1053 * d10v-dis.c: New file.
1054 * d10v-opc.c: New file.
1055 * disassemble.c (disassembler) Add entry for d10v.
1058 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1060 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1061 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1063 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1065 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1066 distinguish between variants of the instruction set.
1067 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1068 distinguish between variants of the instruction set.
1070 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1072 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1073 the 8086 instruction set.
1074 * i386-dis.c: General cleanups. Make most things static. Add
1075 prototypes. Get rid of static variables aflags and dflags. Pass
1076 them as args (to almost everything).
1078 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1080 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1082 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1084 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1085 if the next arg is marked with SRC_IN_DST. Gross.
1087 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1088 we're looking for and find EXR.
1090 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1091 if we're looking for KBIT and we don't find it.
1093 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1096 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1097 3bit immediate operands.
1099 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1101 * Released binutils 2.7.
1103 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1104 <kkaempf@progis.ac-net.de>.
1106 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1108 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1110 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1112 * sparc-dis.c (print_insn_sparclite): New routine to print
1113 sparclite instructions.
1115 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1117 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1119 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1121 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1122 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1123 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1125 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1127 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1128 Use autoconf-set values.
1129 (docdir, oldincludedir): Removed.
1130 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1132 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1134 * alpha-opc.c: New file.
1135 * alpha-opc.h: Remove.
1136 * alpha-dis.c: Complete rewrite to use new opcode table.
1137 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1138 * configure: Rebuild with autoconf 2.10.
1139 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1140 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1142 (alpha-opc.o): New target.
1144 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1146 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1147 Set imm_added_to_rs1 even if the source and destination register
1150 * sparc-opc.c: Add some two operand forms of the wr instruction.
1152 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1154 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1157 * disassemble.c (disassembler): Handle H8/S.
1158 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1160 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1162 * sparc-opc.c: Add beq/teq as aliases for be/te.
1164 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1165 <sergei@msil.sps.mot.com>.
1167 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1169 * makefile.vms: New file.
1171 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1173 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1175 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1178 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1180 * i386-dis.c (OP_OFF): Call append_prefix.
1182 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1184 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1185 unsigned long to silence a warning from the Solaris PowerPC
1188 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1190 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1192 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1194 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1196 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1197 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1198 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1199 cpush, cpusha, cpull sparclet insns.
1201 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1203 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1205 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1207 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1208 Set F_FLOAT on other floating point instructions.
1210 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1212 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1214 (powerpc_opcodes): Add 860/821 specific SPRs.
1216 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1218 * configure.in: Permit --enable-shared to specify a list of
1219 directories. Set and substitute BFD_PICLIST.
1220 * configure: Rebuild.
1221 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1222 uses. Set to @BFD_PICLIST@.
1224 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1226 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1227 not "abs", which may be needed for the absolute in something
1228 like btst #0,@10:8. Print L_3 immediates separately from other
1229 immediates. Change ABSMOV reference to ABS8MEM.
1231 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1233 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1234 (current_arch_mask): New static global.
1235 (compute_arch_mask): New static function.
1236 (print_insn_sparc): Delete sparc_v9_p. New static local
1237 current_mach. Resort opcode table if current_mach changes.
1238 Generalize "insn not supported" test.
1239 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1240 Delete test for v9/!v9.
1241 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1243 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1244 (brfcx): Renamed to FBRX.
1245 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1246 coprocessor mnemonics are not supported on the sparclet).
1247 (condf): Renamed to CONDF.
1248 (SLCBCC2): Delete F_ALIAS flag.
1250 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1252 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1253 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1255 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1257 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1258 that the shared library version number is set correctly.
1260 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1262 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1263 Miles Bader <miles@gnu.ai.mit.edu>.
1264 * configure: Rebuild.
1266 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1268 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1271 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1273 * configure: Rebuild with autoconf 2.8.
1275 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1277 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1278 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1280 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1282 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1283 since they appear as targets in Makefile.in.
1284 * configure: Rebuild.
1286 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1288 * mpw-make.sed: Edit out shared library support bits.
1290 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1292 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1293 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1294 (sparc_opcodes): Add sparclet insns.
1295 (sparclet_cpreg_table): New static local.
1296 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1297 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1299 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1301 * i386-dis.c (index16): New static variable.
1302 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1304 (OP_indirE): Return result of OP_E.
1305 (OP_E): Check for 16 bit addressing mode, and disassemble
1306 correctly. Optimised 32 bit case a little. Don't print
1307 "(base,index,scale)" when sib specifies only an offset.
1309 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1311 * configure.in: Set and substitute SHLIB_DEP.
1312 * configure: Rebuild.
1313 * Makefile.in (SHLIB_DEP): New variable.
1314 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1315 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1316 COMMON_SHLIB, add them to piclist with appropriate modifications.
1317 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1318 here: just use piclist.
1320 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1322 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1323 (print_insn_sparc): Rewrite v9/not-v9 tests.
1324 (compare_opcodes): Likewise.
1325 * sparc-opc.c (MASK_<ARCH>): Define.
1326 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1327 (sparclet,v6notv9): Define.
1328 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1329 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1331 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1333 * configure.in: Call AC_PROG_CC before configure.host.
1334 * configure: Rebuild.
1336 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1338 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1340 * i386-dis.c (onebyte_has_modrm): New static array.
1341 (twobyte_has_modrm): New static array.
1342 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1344 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1346 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1349 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1351 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1354 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1356 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1357 m68010up, not just m68020up | cpu32.
1359 * Makefile.in (SONAME): New variable.
1360 ($(SHLINK)): Make a link to the transformed name, as well.
1361 (stamp-tshlink): New target.
1362 (install): Skip stamp-tshlink during install.
1364 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1366 * configure.in: Call AC_ARG_PROGRAM.
1367 * configure: Rebuild.
1368 * Makefile.in (program_transform_name): New variable.
1369 (install): Transform library name before installing it.
1371 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1373 * i960-dis.c (mem): Add HX dcinva instruction.
1375 Support for building as a shared library, based on patches from
1376 Alan Modra <alan@spri.levels.unisa.edu.au>:
1377 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1378 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1379 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1380 * configure: Rebuild.
1381 * Makefile.in (ALLLIBS): New variable.
1382 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1383 (COMMON_SHLIB, SHLINK): New variables.
1384 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1385 (STAGESTUFF): Remove variable.
1386 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1387 (stamp-piclist, piclist): New targets.
1388 ($(SHLIB), $(SHLINK)): New targets.
1389 ($(OFILES)): Depend upon stamp-picdir.
1390 (disassemble.o): Build twice if PICFLAG is set.
1391 (MOSTLYCLEAN): Add pic/*.o.
1392 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1393 (distclean): Remove pic and stamp-picdir.
1394 (install): Install shared libraries.
1395 (stamp-picdir): New target.
1397 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1399 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1400 Print unknown instruction as "unknown", rather than in hex.
1402 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1404 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1406 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1408 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1410 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1412 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1413 when necessary. From Ulrich Drepper
1414 <drepper@myware.rz.uni-karlsruhe.de>.
1416 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1418 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1419 sparc_num_opcodes. Update architecture enum values.
1420 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1421 (sparc_opcode_lookup_arch): New function.
1422 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1423 (sparc_opcodes): Add v9a shutdown insn.
1425 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1427 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1428 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1430 (print_insn_sparc64): Deleted.
1431 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1434 * sparc-opc.c (architecture_pname): Add v9a.
1436 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1438 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1439 incorrectly defined as 0x16 when it should be 0x15.
1440 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1441 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1442 excb (exception barrier) which is defined in the Alpha
1443 Architecture Handbook version 2.
1444 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1445 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1446 disassembled as or, for example.
1448 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1450 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1451 (_print_insn_mips): Change i from int to unsigned int.
1453 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1455 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1456 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1458 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1460 * i386-dis.c: Added Pentium Pro instructions.
1462 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1464 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1467 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1469 * sh-opc.h (sh_nibble_type): Added REG_B.
1470 (sh_arg_type): Added A_REG_B.
1471 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1473 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1475 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1477 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1479 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1481 * Makefile.in (distclean): Remove stamp-h. From Ronald
1482 F. Guilmette <rfg@monkeys.com>.
1484 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1486 From David Mosberger-Tang <davidm@azstarnet.com>:
1487 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1490 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1492 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1493 (sh_table): Added many SH3 opcodes.
1494 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1496 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1498 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1499 (subco,subco.): Mark this PPC, not PPCCOM.
1501 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1503 * configure: Rebuild with autoconf 2.7.
1505 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1507 * configure: Rebuild with autoconf 2.6.
1509 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1511 * configure.in: Sort list of architectures. Accept but do nothing
1512 for alliant, convex, pyramid, romp, and tahoe.
1514 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1516 * a29k-dis.c (print_special): Change num to unsigned int.
1518 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1520 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1523 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1525 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1526 * configure: Rebuilt.
1528 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1530 * configure.in: Add case for bfd_i860_arch.
1531 * configure: Rebuild.
1533 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1535 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1536 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1537 (NEXTDOUBLE): Likewise.
1538 (print_insn_m68k): Don't match fmoveml if there is more than one
1539 register in the list.
1540 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1542 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1544 * m68k-opc.c: Use #W rather than #w.
1545 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1547 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1549 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1550 and likewise for all the dbxx opcodes.
1552 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1554 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1556 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1558 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1559 the VR4100 specific instructions to the mips_opcodes structure.
1561 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1563 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1564 ugly Metrowerks bug in CW6, is fixed in CW7.
1566 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1568 * ppc-opc.c (whole file): Add flags for common/any support.
1570 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1572 * Makefile.in (BISON): Remove macro.
1573 (FLAGS_TO_PASS): Remove BISON.
1575 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1577 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1579 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1580 instructions that take no args by looking at the match mask.
1581 (print_insn_arg): Always print "%" before register names.
1582 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1583 [case '_']: Don't print "@#" before address.
1584 [case 'J']: Use "%s" as format string, not register name.
1585 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1587 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1589 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1592 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1594 From David Mosberger-Tang <davidm@azstarnet.com>
1596 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1597 (alpha_insn_set): added definitions for VAX floating point
1598 instructions (Unix compilers don't generate these, but handcoded
1599 assembly might still use them).
1601 * alpha-dis.c (print_insn_alpha): added support for disassembling
1602 the miscellaneous instructions in the Alpha instruction set.
1604 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1606 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1607 no longer create sysdep.h, sed ppc-opc.c to work around a
1608 serious Metrowerks C bug.
1609 * mpw-make.in: Remove.
1610 * mpw-make.sed: New file, used by mpw-configure to edit
1611 Makefile.in into an MPW makefile.
1613 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1615 * Makefile.in (maintainer-clean): New synonym for realclean.
1617 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1619 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1620 which use '0', '1', and '2' instead. Specify the proper size for
1621 a pmove immediate operand. Correct the pmovefd patterns to be
1622 moves to a register, not from a register.
1623 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1625 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1627 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1628 %psr, %wim, %tbr as F_NOTV9.
1630 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1632 * Makefile.in (Makefile): Just rebuild Makefile when running
1634 (config.h, stamp-h): New targets.
1635 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1636 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1637 rebuilding config.h.
1638 * configure: Rebuild.
1640 * mips-opc.c: Change unaligned loads and stores with "t,A"
1641 operands to use "t,A(b)".
1643 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1645 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1647 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1649 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1650 until 3 instead of until 2.
1652 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1654 * Makefile.in (ALL_CFLAGS): Define.
1655 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1656 (MOSTLYCLEAN): Add config.log.
1657 (distclean): Don't remove config.log.
1658 * configure.in: Substitute HDEFINES.
1659 * configure: Rebuild.
1661 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1663 * sh-opc.h (sh_arg_type): Add F_FR0.
1664 (sh_table, case fmac): Add F_FR0 as first argument.
1666 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1668 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1670 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1672 * sparc-dis.c: Remove all references to NO_V9.
1674 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1676 * aclocal.m4: Just include ../bfd/aclocal.m4.
1677 * configure: Rebuild.
1679 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1681 * sparc-dis.c (X_DISP19): Define.
1682 (print_insn, case 'G'): Use it.
1683 (print_insn, case 'L'): Sign extend displacement.
1685 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1687 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1688 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1689 host_makefile_frag or frags.
1690 * aclocal.m4: New file.
1691 * configure: Rebuild.
1692 * Makefile.in (INSTALL): Set to @INSTALL@.
1693 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1694 (INSTALL_DATA): Set to @INSTALL_DATA@.
1696 (AR_FLAGS): Set to rc rather than qc.
1697 (CC): Define as @CC@.
1698 (CFLAGS): Set to @CFLAGS@.
1699 (@host_makefile_frag@): Remove.
1700 (config.status): Remove dependency upon @frags@.
1702 * configure.in: ../bfd/config.bfd now just sets shell variables.
1703 Use them rather than looking through target Makefile fragments.
1704 * configure: Rebuild.
1706 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1708 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1710 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1712 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1713 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1716 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1717 (lookup_{name,value}): New functions.
1718 (prefetch_table): New static local.
1719 (sparc_{encode,decode}_prefetch): New functions.
1720 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1722 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1724 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1727 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1729 * sh-dis.c: Correct comment on first line of file.
1731 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1733 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1735 * sparc-opc.c (asi, membar): New static locals.
1736 (sparc_{encode,decode}_{asi,membar}): New functions.
1737 (sparc_opcodes, membar insn): Fix.
1738 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1739 Support decoding of membar masks.
1742 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1744 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1746 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1748 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1749 and likewise for the other branches. Add bhs as an alias for bcc,
1750 and likewise for the size variants. Add dbhs as an alias for
1753 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1755 * sh-opc.h (FP sts instructions): Update to match reality.
1757 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1759 * m68k-dis.c: (fpcr_names): Add % before all register names.
1760 (reg_names): Likewise.
1761 (print_insn_arg): Don't explicitly print % before register names.
1762 Add % before register names in static array names. In case 'r',
1763 print data registers as `@(Dn)', not `Dn@'. When printing a
1764 memory address, don't print @# before it.
1765 (print_indexed): Change base_disp and outer_disp from int to
1766 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1767 syntax. Sign extend 8 byte displacement correctly.
1768 (print_base): Print using MIT syntax. Print zpc when appropriate.
1769 Change parameter disp from int to bfd_vma.
1771 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1774 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1776 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1777 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1778 * sh-opc.h (sh_arg_type): Add new operand types.
1779 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1781 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1783 * Makefile.in (distclean): Remove generated file config.h.
1785 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1787 * Makefile.in (distclean): Remove generated file config.h.
1789 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1791 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1793 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1795 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1796 rather than numopcodes. Use m68k_opcodes rather than removed
1797 opcode function. Don't check F_ALIAS.
1798 (print_insn_arg): Change first parameter to be const char *.
1799 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1800 (m68k-opc.o): New target.
1801 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1802 * configure: Rebuild.
1804 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1806 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1807 (opcode_bits, opcode_hash_table): New variables.
1808 (opcodes_initialized): Renamed from opcodes_sorted.
1809 (build_hash_table): New function.
1810 (is_delayed_branch): Use hash table.
1811 (print_insn): Renamed from print_insn_sparc, made static.
1812 Build and use hash table. If !sparc64, ignore sparc64 insns,
1813 and vice-versa if sparc64.
1814 (print_insn_sparc, print_insn_sparc64): New functions.
1815 (compare_opcodes): Move sparc64 opcodes to end.
1816 Print commutative insns with constant second.
1817 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1819 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1821 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1822 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1823 avoids printing a delay slot in a delay slot.
1824 * sh-opc.h (sh_table): Fully bracket last entry.
1826 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1828 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1830 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1832 * configure.in: Get host_makefile_frag from ${srcdir}.
1834 * configure.in: Autoconfiscated. Check for string[s].h. Create
1835 config.h from config.in. Don't set up sysdep.h link.
1836 * sysdep.h: New file.
1837 * configure, config.in: New files, generated from configure.in.
1838 * Makefile.in: Updated to be processed autoconf-style.
1839 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1840 (Makefile): Depend on config.status.
1841 (config.status): New rule.
1842 * configure.bat: Update Makefile substitutions.
1844 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1846 * mips-opc.c (L1): Define.
1847 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1848 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1851 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1853 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1854 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1855 have multiple add units but only a single logical unit.
1857 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1858 shifted by 18, without any insertion or extraction function.
1859 (insert_cr, extract_cr): Remove.
1862 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1864 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1867 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1869 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1872 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1874 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1875 * sh-opc.h: Add copyright.
1877 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1879 * Makefile.in (crunch-m68k): Delete extra target accidentally
1880 checked in a while ago.
1882 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1884 * sh-opc.h (sh_table): Add SH3 support.
1886 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1888 * sh-opc.h: Added bsrf and braf.
1890 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1892 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1893 bogus [ls]fm{ea,fd} patterns.
1895 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1896 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1897 initialize it from memory. Make function static.
1898 (print_insn_{big,little}_arm): New functions.
1899 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1900 the correct endianness.
1903 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1905 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1906 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1909 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1911 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1914 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1916 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1917 17th, so that it builds again using GCC as the compiler.
1919 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1921 * mips-dis.c (print_insn_little_mips): Cast return value from
1922 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1923 expects an unsigned long, and that might be fewer words of
1924 argument storage (e.g., if bfd_vma is long long on a 32-bit
1926 (print_insn_big_mips): Likewise with bfd_getb32 value.
1927 (_print_insn_mips): Now static.
1929 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1931 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1932 gcc memory hog problem with initializer is fixed.
1935 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1937 * arc-opc.c (NULL): Define.
1938 (arc_operands, insn fields u,s): Delete.
1939 (arc_operands, insn fields a,b,c): Mark as signed.
1940 (arc_opcodes): No longer const, links computed at run-time.
1941 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1942 suffixes that affect the insn code.
1943 (arc_opcodes): Resort table to macros are first.
1944 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1945 (arc_opcodes, st [b] entry): Likewise.
1946 (arc_opcodes, st [b,d] entry): Fix mask, value.
1947 (arc_reg_names): Add entries for r29, r30, r31, r60.
1948 (opcode_map, icode_map): New static globals.
1949 (arc_opcode_init_tables): Initialize them.
1950 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1951 (insert_shimmoffset): Signal error if register present.
1953 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1956 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1958 Merge in support for Mac MPW as a host.
1959 (Old change descriptions retained for informational value.)
1961 * mpw-config.in (archname): Compute from the config.
1962 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1964 * mpw-config.in (target_arch): Compute from canonical target.
1965 (m68k, mips, powerpc, sparc): Add architectures.
1966 * mpw-make.in (disassemble.c.o): Add.
1967 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1969 * mpw-config.in (BFD_MACHINES): Set to a default value.
1970 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1972 * mpw-make.in (CSEARCH): Add extra-include to search path.
1974 * mpw-config.in (varargs.h): Don't create.
1975 (sysdep.h): Create using forward-include.
1976 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1978 * mpw-config.in: New file, MPW version of configure.in.
1979 * mpw-make.in: New file, MPW version of Makefile.in.
1982 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1984 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1985 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1986 (print_insn_*): Pass bfd mach number, not opcode version.
1987 * arc-opc.c (arc_get_opcode_mach): New function.
1990 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1992 * alpha-dis.c (print_insn_alpha): Put empty statement after
1995 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1997 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1998 (low_sign_extend): Likewise.
1999 (get_field): Delete unused function.
2000 (set_field, deposit_14, deposit_21): Likewise.
2002 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2004 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2007 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2009 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2011 * alpha-opc.h (OSF_ASMCODE): define
2012 print pal-code names as defined in App C of the
2013 Alpha Architecture Reference Manual
2015 * alpha-dis.c: cleaned up output
2016 print stylized code forms as defined in App A.4.3 of the
2017 Alpha Architecture Reference Manual
2019 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2021 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2023 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2026 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2028 * m68k-dis.c (opcode): New function. Returns address of opcode
2029 table entry given index, even if the opcode table was split to
2030 work around gcc bugs.
2031 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2033 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2034 (reg_names): Now const.
2035 (print_insn_arg): Arrays cacheFieldName and names now const.
2036 (print_indexed): Array scales now const.
2039 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
2041 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
2042 (print_insn_arc_{host,graphics,audio}): Likewise.
2043 (print_insn): Add prototype.
2044 (arc_get_disassembler): New arg `big_p'. Return little or big
2045 print fn accordingly.
2046 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2047 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2048 (arc_opval_supported): Likewise.
2049 * disassemble.c (disassembler): Pass big endian flag to
2050 arc_get_disassembler.
2053 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2055 * ppc-opc.c: Sort recently added instructions by minor opcode
2056 number within major opcode number.
2058 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2060 * hppa-dis.c: Include libhppa.h.
2062 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2064 * mips-opc.c: Change dli to use M_DLI, and add dla.
2066 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2068 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2071 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
2073 * arc-dis.c (arc_get_disassembler): Change argument to int,
2074 one of bfd_mach_arc_xxx. All callers updated.
2077 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2079 * mips-opc.c: Add r4650 mul instruction.
2081 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2083 * mips-opc.c: Add uld and usd macros for unaligned double load and
2086 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2088 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2089 mfdcr, mtdcr, icbt, iccci.
2092 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
2094 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2095 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2096 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2097 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2098 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2099 (insert_absaddr): New function.
2101 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2103 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2104 New argument `cpu', pass it to arc_opcode_init_tables.
2105 Document byte order dependencies. Ignore unsupported insns.
2106 (arc_get_disassembler): New function.
2107 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2108 print_insn_arc_audio): New functions.
2109 * arc-opc.c (MULTSHIFT operand): Delete.
2110 (UNSIGNED, SATURATION): New operands.
2111 (mac, mul, mul64, mulu64): New insns.
2112 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2113 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2114 (host,graphics,audio extended and auxiliary regs): Define.
2115 (ss, sc, mh, ml): New suffixes.
2116 (arc_opcode_supported, arc_opval_supported): New functions.
2117 (insert_multshift, extract_multshift): Deleted.
2118 * disassemble.c (disassembler, case bfd_arch_arc): Call
2119 arc_get_disassembler to get disassembler routine.
2122 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2124 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2125 signed char fields to shorts, more portable.
2127 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2129 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2130 char fields as signed chars, since they may have negative values.
2132 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2134 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2135 (mycroft@netbsd.org).
2137 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2139 From "Logg, Ed" <elogg@ea.com>:
2140 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2141 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2144 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2146 * ppc-opc.c: Changes based on patch from David Edelsohn
2147 <edelsohn@mhpcc.edu>.
2148 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2151 (insert_tbr): New static function.
2152 (extract_tbr): New static function.
2153 (XFXFXM_MASK, XFXM): Define.
2154 (XSPRBAT_MASK, XSPRG_MASK): Define.
2155 (powerpc_opcodes): Add instructions to access special registers by
2156 name. Add mtcr and mftbu.
2158 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2160 * mips-opc.c (P3): Define.
2161 (mips_opcodes): Add mad and madu.
2163 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2165 * configure.in: Add W65 support.
2166 * disassemble.c: Likewise.
2167 * w65-opc.h, w65-dis.c: New files.
2169 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2171 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2175 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2177 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2179 * arc-opc.c (extract_reladdr): New function.
2180 (insert_reladdr): Store address right-shifted by 2.
2183 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2185 * mips-opc.c: Add dli as a synonym for li.
2188 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2190 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2192 (extraction fns): Insn argument now array of two words. Return pointer
2193 to value's table entry. All uses changed.
2194 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2195 (insert_multshift, extract_multshift): New fns.
2196 (arc_operands): Add support for cache bypass suffix. Add support for
2197 predefined aux regs. Modifier bits moved to flags field.
2198 (arc_opcodes): Likewise.
2199 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2200 New insn rlc. Update to syntax in programmer's manual.
2201 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2202 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2204 (arc_opcode_init_tables): New argument to indicate cpu type.
2205 (insert_reg): Handle predefined aux regs.
2206 (extract_reg): Likewise.
2207 (lookup_register): New fn.
2208 * arc-dis.c (arc_condition_codes): Deleted.
2209 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2210 Clean up modifier handling. Handle predefined aux regs.
2213 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2215 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2216 print something for reserved opcode values, even if it won't
2219 * mips-dis.c (_print_insn_mips): When initializing, shift right
2220 and mask, to avoid sign extension problems on the Alpha.
2222 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2226 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2228 * configure.in: Add ARC support.
2229 * disassemble.c: Likewise.
2230 * arc-dis.c, arc-opc.c: New files.
2233 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2235 * sh-opc.h (mov.l gbr): Get direction right.
2236 * sh-dis.c (print_insn_shx): New function.
2237 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2238 print opcodes with right byte order.
2240 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2242 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2243 to avoid conflicts with getopt.
2245 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2247 * hppa-dis.c (print_insn_hppa): Read the instruction using
2248 bfd_getb32, so that it works on a little endian or 64 bit host.
2249 Remove unused local variable op.
2251 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2253 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2254 addu does not work correctly if -mips3.
2256 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2258 * a29k-dis.c (print_special): Add special register names defined
2259 on 29030, 29040 and 29050.
2260 (print_insn): Handle new operand type 'I'.
2262 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2264 * Makefile.in (INSTALL): Use top level install.sh script.
2266 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2268 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2269 that it works on a little endian host.
2271 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2273 * configure.in: Use ${config_shell} when running config.bfd.
2275 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2277 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2279 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2281 * a29k-dis.c (print_insn): Print the opcode.
2283 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2285 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2287 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2289 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2291 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2293 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2294 which store a value into memory.
2296 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2298 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2299 * arm-dis.c, arm-opc.h: New files.
2301 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2303 * Makefile.in (ns32k-dis.o): Add dependency.
2304 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2305 string, not as array of chars.
2307 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2309 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2311 * sparc-opc.c: Added sparclite extended FP operations, and
2312 versions of v9 impdep* instructions permitting specification of
2315 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2317 * i960-dis.c (reg_names): Now const.
2318 (struct sparse_tabent): New type, copied from array type in mem
2320 (ctrl): Local static array ctrl_tab now const.
2321 (cobr): Local static array cobr_tab now const.
2322 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2323 static variable mem_tab no longer explicitly initialized. Changed
2324 mem_init to const array of struct sparse_tabent.
2325 (reg): Local static variable reg_tab no longer explicitly
2326 initialized. Changed reg_init to const array of struct
2328 (ea): Local static array scale_tab now const.
2330 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2333 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2335 * configure.bat: the disassember needs to be enabled for
2336 "objdump -d" to work in djgpp.
2338 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2340 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2341 (invalid_float): Enabled general version, doesn't require running
2342 on ns32k host. Changed to take char* argument, and test for
2343 explicitly specified sizes, instead of using sizeof() on host CPU
2345 (INVALID_FLOAT): Cast first argument.
2346 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2347 list_P032, list_M032): Now const.
2348 (optlist, list_search): Made appropriate arguments now point to
2350 (print_insn_arg): Changed static array of one-character-string
2351 pointers into a static const array of characters; fixed sprintf
2352 statement accordingly.
2354 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2356 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2357 from distribution. A ns32k-dis.c from a previous distribution has
2358 been brought up to date and supports the new interface.
2360 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2362 * configure.in: add bfd_ns32k_arch target support.
2364 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2365 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2367 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2369 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2372 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2374 * h8300-dis.c, mips-dis.c: Don't use true and false.
2376 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2378 * configure.in: Change --with-targets to --enable-targets.
2380 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2382 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2383 opcodes to the first instruction with that opcode, to speed
2384 disassembly of large files. From ralphc@pyramid.com (Ralph
2387 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2389 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2391 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2393 * configure.bat: update to latest makefile.in
2395 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2397 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2398 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2399 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2400 slot insn is in a delay slot.
2401 * z8k-opc.h: (resflg): Fix patterns.
2402 * h8500-opc.h Fix CR insn patterns.
2404 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2406 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2407 "cmpl" before POWER versions, so that gas -many uses them.
2409 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2411 * disassemble.c: New file.
2412 * Makefile.in (OFILES): Add disassemble.o.
2413 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2414 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2415 binutils/configure.in.
2417 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2418 opcode being examined.
2420 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2422 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2423 (insert_ral, insert_ram, insert_ras): New functions.
2424 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2425 RAS for store with update.
2427 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2429 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2430 (edelsohn@npac.syr.edu).
2432 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2434 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2437 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2439 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2441 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2443 * ppc-opc.c (powerpc_operands): The signedp field has been
2444 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2445 instead. Add new operand SISIGNOPT.
2446 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2447 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2448 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2451 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2453 * i386-dis.c (struct private): Renamed to dis_private. `private'
2454 is a reserved word for dynix cc.
2456 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2458 * configure.in: Change error message to refer to bfd/config.bfd
2459 rather than bfd/configure.in.
2461 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2463 * ppc-opc.c: Define POWER2 as short alias flag.
2464 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2467 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2469 * i960-dis.c (print_insn_i960): Don't read a second word for
2470 opcodes 0, 1, 2 and 3.
2472 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2474 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2476 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2478 * m68881-ext.c: Removed; no longer used.
2479 * Makefile.in: Changed accordingly.
2481 * m68k-dis.c (ext_format_68881): Don't declare.
2482 (print_insn_m68k): If an instruction uses place 'i', it uses at
2483 least four fixed bytes.
2484 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2485 extended float, convert to double using floatformat_to_double, not
2486 ieee_extended_to_double, and fetch the data before converting it.
2488 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2490 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2491 davidj@ICSI.Berkeley.EDU (David Johnson).
2493 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2495 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2496 PowerPC uses bdnz[l][a].
2498 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2500 * dis-buf.c, i386-dis.c: Include sysdep.h.
2502 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2504 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2506 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2507 by Motorola PowerPC 601 with PPC_OPCODE_601.
2508 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2509 Disassemble Motorola PowerPC 601 instructions as well as normal
2510 PowerPC instructions.
2512 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2514 * i960-dis.c (reg, mem): Just use a static array instead of
2517 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2519 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2520 condition name index if this is for a negated condition.
2522 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2523 Floating point format for 'H' operand is backwards from normal
2524 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2525 operands (fmpyadd and fmpysub), handle bizarre register
2526 translation correctly for single precision format.
2528 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2529 or 'I' operands if the next format specifier is 'M' (fcmp
2530 condition completer).
2532 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2534 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2535 single number giving a bitmask for the MB and ME fields of an M
2536 form instruction. Change NB to accept 32, and turn it into 0;
2537 also turn 0 into 32 when disassembling. Seperated SH from NB.
2538 (insert_mbe, extract_mbe): New functions.
2539 (insert_nb, extract_nb): New functions.
2540 (SC_MASK): Mask out SA and LK bits.
2541 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2542 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2543 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2544 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2545 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2546 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2547 (powerpc_macros): Define table of macro definitions.
2548 (powerpc_num_macros): Define.
2550 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2551 if PPC_OPERAND_NEXT is set.
2553 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2555 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2556 char. Retrieve contents using bfd_getl32 instead of shifting.
2558 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2560 * ppc-opc.c: New file. Opcode table for PowerPC, including
2561 opcodes for POWER (RS/6000).
2562 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2563 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2564 (CFILES): Add ppc-dis.c.
2565 (ppc-dis.o, ppc-opc.o): New targets.
2566 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2568 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2570 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2571 No space before 'u', 'f', or 'N'.
2573 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2575 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2576 farther than we should.
2578 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2580 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2582 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2584 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2586 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2587 needs it, to prevent reading past the end of a section.
2589 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2591 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2592 Removed t,A case for la; always use t,A(b) case.
2594 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2596 From Ted Lemen <mellon@pepper.ncd.com>
2597 * mips-dis.c (print_insn_arg): Handle 'k'.
2598 * mips-opc.c: Make cache use k, not t.
2600 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2602 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2603 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2604 FLOAT_FORMAT_CODE to put out floating point register names.
2606 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2608 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2610 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2612 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2614 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2616 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2617 larger than 32. Moved dsxx32 variants first for disassembler.
2619 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2621 * z8kgen.c, z8k-opc.h: Add full lda information.
2623 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2625 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2626 movb instructions. Any necessary space will be emitted by
2627 the code to handle nullification completers.
2629 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2631 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2633 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2635 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2636 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2638 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2640 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2642 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2644 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2645 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2647 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2649 * m88k-dis.c (m88kdis): comment change. Remove space after
2651 (printop): handle new arg types DEC and XREG for m88110.
2653 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2655 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2656 type for absolute branch addresses. Delete special
2657 "ble" and "be" code in 'W' operand code.
2659 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2661 * mips-opc.c: Set hazard information correctly for branch
2662 likely instructions.
2664 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2666 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2667 info->fprintf_func for printing and info->print_address_func for
2670 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2672 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2674 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2676 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2677 Corrected second case of "b" for disassembler.
2679 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2681 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2682 to BFD swapping routines to correspond to BFD name changes.
2684 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2686 * mips-opc.c: Change div machine instruction to be z,s,t rather
2687 than s,t. Change div macro to be d,v,t rather than d,s,t.
2688 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2689 rem and remu which generates only the corresponding div
2690 instruction. This is for compatibility with the MIPS assembler,
2691 which only generates the simple machine instruction when an
2692 explicit destination of $0 is used.
2693 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2695 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2697 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2698 WR_31 hazard for bal, bgezal, bltzal.
2700 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2702 * hppa-dis.c (print_insn_hppa): Use print function
2703 from within the disassemble_info, not fprintf_filtered.
2705 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2707 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2708 Law, law@cs.utah.edu.)
2710 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2712 * mips-opc.c ("absu"): Removed.
2715 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2717 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2718 Changed hazard information to distinguish between memory load
2719 delays and coprocessor load delays.
2721 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2723 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2725 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2727 * configure.in: Don't pass cpu to config.bfd.
2729 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2731 * m88k-dis.c (m88kdis): Make class unsigned.
2733 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2735 * alpha-dis.c (print_insn_alpha): One branch format case was
2736 missing the instruction name.
2738 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2740 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2741 Add the arch-specific auxiliary files.
2742 (OFILES): Remove the arch-specific auxiliary files
2743 and use BFD_MACHINES instead of DIS_LIBS.
2744 * configure.in: Set BFD_MACHINES based on --with-targets option.
2746 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2748 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2751 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2753 * sparc-opc.c: Change CONST to const to deal with gcc
2754 -Dconst=__const -traditional.
2756 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2758 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2759 coprocessor instructions out of #if 0, and made them use new
2762 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2764 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2766 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2768 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2769 instruction, for use by the disassembler.
2771 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2772 hand-coded sign extensions that depended on 32-bit host ints.
2773 FIXME, we still depend on big-endian host bitfield ordering.
2774 (sparc_print_insn): Set the insn_info_valid field, and the
2775 other fields that describe the instruction being printed.
2777 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2779 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2780 `jmp' instead of just one of them.
2782 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2784 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2785 (fput_fp_reg_r): Renamed from fput_reg_r.
2786 (fput_fp_reg): New function.
2787 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2789 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2791 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2793 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2795 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2797 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2798 don't output a space.
2800 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2802 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2804 * mips-opc.c: New file, containing opcode table from
2805 ../include/opcode/mips.h.
2806 * Makefile.in: Add it.
2808 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2810 * m88k-dis.c: New file, moved in from gdb and changed to use the
2811 new dis-asm.h disassembler interface.
2812 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2813 (m88k-dis.o): New target.
2815 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2817 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2818 argument string const char * to correspond to opcode/mips.h.
2820 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2822 * mips-dis.c: Updated to account for name changes in new version
2824 * Makefile.in: Added header file dependencies.
2826 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2828 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2830 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2832 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2833 extend, rather than shifts.
2835 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2837 * Makefile.in: Undo 15 June change.
2839 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2841 * m68k-dis.c (print_insn_arg): Change return value to byte count
2843 * m68k-dis.c: Re-write to detect invalid operands before
2844 printing anything, so we can handle this the same way we
2845 handle invalid opcodes.
2847 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2849 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2851 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2853 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2856 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2858 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2860 * configure.in: Do make sysdep.h link.
2861 * Makefile.in: Search ../include. Don't search ../bfd.
2863 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2865 Changes from Jeff Law, law@cs.utah.edu:
2866 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2867 Do not print a space before the completers specified by
2870 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2872 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2873 defined, since gdb has been fixed.
2875 Changes from Jeff Law, law@cs.utah.edu:
2876 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2877 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2878 be a *disassemble_info, not a *FILE.
2879 * hppa-dis.c: Support 'd', '!', and 'a'.
2880 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2881 * hppa-dis.c: Delete cases which are no longer needed.
2883 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2885 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2887 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2889 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2892 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2894 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2895 * configure.in: No longer need to configure to get sysdep.h.
2897 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2899 * Patches from Jeffrey Law <law@cs.utah.edu>.
2900 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2901 templates for 1.1 FP computational instructions.
2903 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2905 * h8500-dis.c (print_insn_h8500): Address argument is type
2907 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2910 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2911 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2913 * sparc-dis.c (compare_opcodes): Move static declaration to
2916 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2918 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2919 instruction, remove unimp hack from 'l' argument.
2921 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2923 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2926 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2928 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2929 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2932 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2934 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2935 arrays of string pointers to 2-d arrays of chars, to save
2938 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2940 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2941 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2943 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2945 * hppa-dis.c: New file from Utah, adapted to new disassembler
2947 * Makefile.in: Include it.
2949 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2951 * sh-dis.c, sh-opc.h: New files.
2953 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2955 * alpha-dis.c, alpha-opc.h: New files.
2957 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2959 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2962 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2964 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2966 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2968 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2971 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2973 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2974 and double percent signs a few places.
2976 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2978 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2979 Use info->print_address_func not print_address.
2981 * dis-buf.c (generic_print_address): New function.
2983 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2985 * Makefile.in: Add sparc-dis.c.
2986 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2988 Add `add' instruction to the set that get checked
2989 for a preceding `sethi' in order to print an absolute address.
2990 * (print_insn): Disassembly prefers real instructions.
2991 (is_delayed_branch): Speed up.
2992 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2993 Still missing some float ops, and needs testing.
2994 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2995 F_ALIAS. Use printf, not fprintf, when not passing a file
2997 (compare_opcodes): Check that identical instructions have
2998 identical opcodes, complain otherwise.
3001 * Include reg_names.
3003 Use dis-asm.h/read_memory_func interface.
3005 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3007 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3008 deliberately return non-zero to setjmp from longjmp. Otherwise
3009 this code fails to compile.
3011 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3013 * m68k-dis.c: Fix prototype for fetch_arg().
3015 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3017 * dis-buf.c: New file, for new read_memory_func interface.
3018 Makefile.in (OFILES): Include it.
3019 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3020 Use new read_memory_func interface.
3022 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3024 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3025 * h8500-opc.h: Fix couple of opcodes.
3027 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3029 * Makefile.in: add dvi & installcheck targets
3031 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3033 * Makefile.in: Update for h8500-dis.c.
3035 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3037 * h8500-dis.c, h8500-opc.h: New files
3039 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3041 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3042 ../include/dis-asm.h.
3043 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3044 and ../gdb/m68k-pinsn.c).
3045 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3046 and ../gdb/i386-pinsn.c).
3047 * m68881-ext.c: New file. Moved definition of
3048 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3049 * Makefile.in: Adjust for new files.
3050 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3051 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3052 can be dis-assembled.
3054 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3056 * mips-dis.c (print_insn_arg): Now returns void.
3058 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3060 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3061 files that use the macros.
3063 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3065 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3066 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3067 (CFILES): Added mips-dis.c.
3069 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3071 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3072 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3074 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3076 * Makefile.in: Improve *clean rules.
3077 * configure.in: Allow a default host.
3079 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3081 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3082 files include other sysdep files
3084 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3086 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3088 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3090 * configure.in: For host support, use ../bfd/configure.host
3091 so it stays in sync with the ../bfd/hosts database.
3093 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3095 * configure.in: use cpu-vendor-os triple instead of nested cases
3097 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3099 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3100 *always* the wrong one.
3102 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3104 * z8kgen.c: added copyright info
3106 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3108 * z8k-dis.c (unparse_instr): prettier tabs
3109 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3111 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3113 * configure.in: Add ncr* configuration.
3114 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3115 picayune ANSI compilers happy.
3117 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3119 * configure.in (i386): Make i386 and i486 synonymous for now.
3120 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3122 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3124 * Makefile.in (install): Fix typo.
3126 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3128 * Makefile.in (make): Remove obsolete crud.
3129 (sparc-opc.o): Avoid Sun Make VPATH bug.
3131 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3133 * Makefile.in: since there are no SUBDIRS, remove rule and
3134 references of subdir_do.
3136 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3138 * Makefile.in (install): Get the library name right here too.
3139 Don't install bfd.h, since it's unrelated to this library. No
3140 subdirs to recurse into, either.
3141 (CFILES): The source file has a .c suffix, not .o.
3143 * sparc-opc.c: New file, moved from BFD.
3144 * Makefile.in (OFILES): Build it.
3146 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3148 * z8k-dis.c: fixed forward refferences of some declarations.
3150 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3152 * Makefile.in: get the name of the library right
3154 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3156 * z8k-dis.c: knows how to disassemble z8k stuff
3157 * z8k-opc.h: new file full of z8000 opcodes
3161 version-control: never