1 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
3 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
4 even at end of a section.
5 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
6 by ignoring precariously-unpacked insn_value in favor of raw buffer.
8 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
10 * disassemble.c (disassembler_usage): Remove unused attribute.
12 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
14 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
16 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
18 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
19 assume incoming buffer already has the base insn loaded. Handle
20 smaller-than-base instructions for variable-length case.
22 2001-05-04 Alan Modra <amodra@one.net.au>
24 * i386-dis.c (Ev, Ed): Remove duplicate define.
27 (OP_XS): New function.
28 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
30 (dis386_twobyte_intel): Likewise.
31 (prefix_user_table): Use MS for maskmovq operand.
33 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
35 * Makefile.am: Add OpenRISC target.
36 * Makefile.in: Regenerated.
38 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
40 * configure.in (bfd_openrisc_arch): Add target.
41 * configure: Regenerated.
43 * openrisc-asm.c: New file.
44 * openrisc-desc.c: Likewise.
45 * openrisc-desc.h: Likewise.
46 * openrisc-dis.c: Likewise.
47 * openrisc-ibld.c: Likewise.
48 * openrisc-opc.c: Likewise.
49 * openrisc-opc.h: Likewise.
51 2001-04-24 Christian Groessler <cpg@aladdin.de>
53 * z8k-dis.c: add names of control registers (ctrl_names);
54 (seg_length): provides instruction length fixup for segmented
55 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
56 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
57 (unparse_intr): handle CLASS_PR, print addresses without '#'
58 * z8k-opc.h: re-created with new z8kgen
59 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
60 entries for ldctl/ldctlb instruction
62 2001-04-06 Andreas Jaeger <aj@suse.de>
64 * i386-dis.c: Add ffreep instruction.
66 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
68 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
70 2001-03-24 Alan Modra <alan@linuxcare.com.au>
72 * i386-dis.c (PREGRP25): Define.
73 (dis386_twobyte_att): Use here in place of "movntq" entry.
74 (dis386_twobyte_intel): Likewise.
75 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
77 (dis386_twobyte_att): Use here.
78 (dis386_twobyte_intel): Likewise.
79 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
80 (prefix_user_table <maskmovdqu>): XM operand, not MX.
81 (prefix_user_table): Cosmetic changes to "bad" entries.
83 2001-03-23 Nick Clifton <nickc@redhat.com>
85 * mips-opc.c: Remove extraneous whitespace.
86 * mips-dis.c: Remove extraneous whitespace.
88 2001-03-22 Ben Elliston <bje@redhat.com>
90 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
91 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
92 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
93 to allay a compiler warning.
95 2001-03-22 Alan Modra <alan@linuxcare.com.au>
97 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
98 (dis386_twobyte_intel): Likewise.
99 (twobyte_has_modrm): Set entry for paddq, psubq.
101 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
103 * cgen-dis.in (print_insn_@arch@): Add support for target machine
104 determination via CGEN_COMPUTE_MACH.
105 * fr30-desc.c: Regenerate.
106 * fr30-dis.c: Regenerate.
107 * fr30-opc.h: Regenerate.
108 * m32r-desc.c: Regenerate.
109 * m32r-dis.c: Regenerate.
110 * m32r-opc.h: Regenerate.
111 * m32r-opinst.c: Regenerate.
113 2001-03-20 H.J. Lu <hjl@gnu.org>
115 * configure.in: Remove the redundent AC_ARG_PROGRAM.
116 * configure: Rebuild.
118 2001-03-19 Jim Wilson <wilson@redhat.com>
120 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
121 notestr if larger than xsect.
122 (in_class): Handle format M5.
123 * ia64-asmtab.c: Regnerate.
125 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
127 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
128 has more than one byte left to read.
130 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
132 * s390-opc.c: Add new opcodes. Smooth out formatting.
133 * s390-opc.txt: Add new opcodes.
135 2001-03-06 Nick Clifton <nickc@redhat.com>
137 * arm-dis.c (print_insn_thumb): Compute destination address
138 of BLX(1) instruction by taking bit 1 from PC and not from bit
141 2001-03-06 Igor Shevlyakov <igor@windriver.com>
143 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
144 so command line switches will work.
146 2001-03-05 Dave Brolley <brolley@redhat.com>
148 * fr30-asm.c: Regenerate.
149 * fr30-desc.c: Regenerate.
150 * fr30-desc.h: Regenerate.
151 * fr30-dis.c: Regenerate.
152 * fr30-ibld.c: Regenerate.
153 * fr30-opc.c: Regenerate.
154 * fr30-opc.h: Regenerate.
155 * m32r-asm.c: Regenerate.
156 * m32r-desc.c: Regenerate.
157 * m32r-desc.h: Regenerate.
158 * m32r-dis.c: Regenerate.
159 * m32r-ibld.c: Regenerate.
160 * m32r-opc.c: Regenerate.
161 * m32r-opc.h: Regenerate.
162 * m32r-opinst.c: Regenerate.
164 2001-02-28 Igor Shevlyakov <igor@windriver.com>
166 * m68k-opc.c: fix cpushl according to Motorola. Enable
167 bunch of instructions for Coldfire 5407 and add all new.
169 2001-02-27 Alan Modra <alan@linuxcare.com.au>
171 * configure.in (BFD_VERSION): Do without grep.
172 * configure: Regenerate.
173 * Makefile.am: Run "make dep-am".
174 * Makefile.in: Regenerate.
176 2001-02-23 David Mosberger <davidm@hpl.hp.com>
178 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
179 * ia64-asmtab.c: Regenerate.
181 2001-02-21 David Mosberger <davidm@hpl.hp.com>
183 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
184 separate variants: one for IMM22 and the other for IMM14.
185 * ia64-asmtab.c: Regenerate.
187 2001-02-21 Greg McGary <greg@mcgary.org>
189 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
191 2001-02-20 H.J. Lu <hjl@gnu.org>
193 * Makefile.am (ia64-ic.tbl): Remove the target.
194 (ia64-raw.tbl): Likewise.
195 (ia64-waw.tbl): Likewise.
196 (ia64-war.tbl): Likewise.
197 (ia64-asmtab.c): Generate it in the source directory.
198 * Makefile.in: Regenerated.
200 2001-02-18 lars brinkhoff <lars@nocrew.org>
202 * Makefile.am: Add PDP-11 target.
203 * configure.in: Likewise.
204 * disassemble.c: Likewise.
205 * pdp11-dis.c: New file.
206 * pdp11-opc.c: New file.
208 2001-02-14 Jim Wilson <wilson@redhat.com>
210 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
211 * ia64-asmtab.c: Regenerate.
213 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
215 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
219 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
221 * mips-dis.c (print_insn_arg): Use top four bits of the address of
222 the following instruction not of the jump itself for the jump
224 (print_mips16_insn_arg): Likewise.
226 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
228 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
230 * Makefile.in: Regenerate.
232 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
234 * Makefile.am: Add linux target for S/390.
235 * Makefile.in: Likewise.
236 * configure.in: Likewise.
237 * disassemble.c: Likewise.
238 * s390-dis.c: New file.
239 * s390-mkopc.c: New file.
240 * s390-opc.c: New file.
241 * s390-opc.txt: New file.
243 2001-02-05 Jim Wilson <wilson@redhat.com>
245 * ia64-asmtab.c: Revert 2000-12-16 change.
247 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
249 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
250 * m32r-desc.h: Regenerate.
252 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
254 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
255 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
257 2001-01-14 Alan Modra <alan@linuxcare.com.au>
259 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
261 2001-01-13 Nick Clifton <nickc@redhat.com>
263 * disassemble.c: Remove spurious white space.
265 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
267 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
270 2001-01-11 Peter Targett <peter.targett@arccores.com>
272 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
273 * Makefile.am (C_FILES): Add arc-ext.c.
274 (ALL_MACHINES) Add arc-ext.lo.
275 (INCLUDES) Add opcode directory to list.
276 New dependency entry for arc-ext.lo.
277 * disassemble.c (disassembler): Correct call to
278 arc_get_disassembler.
279 * arc-opc.c: New update for ARC, including full base
280 instructions for ARC variants.
281 * arc-dis.h, arc-dis.c: New update for ARC, including
282 extensibility functionality.
283 * arc-ext.h, arc-ext.c: New files for handling extensibility.
285 2001-01-10 Jan Hubicka <jh@suse.cz>
287 * i386-dis.c (PREGRP15 - PREGRP24): New.
288 (dis386_twobyt): Add SSE2 instructions.
289 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
290 (twobyte_uses_f3_prefix): ... this one.
291 (grps): Add SSE instructions.
292 (prefix_user_table): Add two new slots; add SSE2 instructions.
293 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
294 Handle the REPNZ and Data16 prefixes as well; do proper lookup
295 to prefix_user_table.
296 (OP_E): Accept mfence and lfence as well.
297 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
298 (OP_XMM): Support REX extensions.
302 2001-01-09 Nick Clifton <nickc@redhat.com>
304 * arm-dis.c (print_insn): Set pc to zero for instructions with
305 a reloc associated with them.
307 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
309 * cgen-asm.in (parse_insn_normal): Changed syn to be
310 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
311 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
312 to '\0' to use 0 instead.
313 * cgen-dis.in (print_insn_normal): Ditto.
314 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
316 2001-01-05 Jan Hubicka <jh@suse.cz>
318 * i386-dis.c: Add x86_64 support.
319 (rex): New static variable.
320 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
321 (USED_REX): New macro.
322 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
323 (OP_I64, OP_OFF64, OP_IMREG): New functions.
324 (OP_REG, OP_OFF): Declare.
325 (get64, get32, get32s): New functions.
326 (r??_reg): New constants.
327 (dis386_att): Change templates of instruction implicitly promoted
328 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
330 (dis386_intel): Likewise.
331 (dixx86_64_att): New table based on dis386_att.
332 (dixx86_64_intel): New table based on dis386_intel.
333 (names64, names8rex): New global variable.
334 (names32, names16): Add extended registers.
335 (prefix_user_t): Recognize rex prefixes.
336 (prefix_name): Print REX prefixes nicely.
337 (op_riprel): New global variable.
338 (start_pc): Set type to bfd_vma.
339 (print_insn_i386): Detect the 64bit mode and use proper table;
340 move ckprefix after initializing the buffer; output unused rex prefixes;
341 output information about target of RIP relative addresses.
342 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
343 (print_operand_value): New function.
344 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
345 REX prefix and new modes.
346 (get64, get32s): New.
347 (get32): Return bfd_signed_vma type.
348 (set_op): Initialize the op_riprel.
349 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
351 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
353 cgen-dis.in (read_insn): Use bfd_get_bits()
355 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
357 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
358 (hash_insn_list): Likewise
359 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
360 (extract_1): Use bfd_get_bits().
361 (extract_normal): Apply sign extension to both extraction
363 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
364 (cgen_put_insn_value): Use bfd_put_bits()
366 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
368 * cgen-asm.in (parse_insn_normal): Print better error message for
369 instructions with missing operands.
371 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
373 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
375 2000-12-16 Nick Clifton <nickc@redhat.com>
377 * Makefile.in: Regenerate.
378 * aclocal.m4: Regenerate.
379 * config.in: Regenerate.
380 * configure.in: Add spacing.
381 * configure: Regenerate.
382 * ia64-asmtab.c: Regenerate.
383 * po/opcodes.pot: Regenerate.
385 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
387 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
388 error messages over later parse-time ones.
390 2000-12-12 Jim Wilson <wilson@redhat.com>
392 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
394 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
395 (print_dependency_table): Print NULL if semantics field not set.
396 (insert_opcode_dependencies): Mark cmp parameter as unused.
397 (print_main_table): Use fprintf_vma to print long long fields.
398 (main): Mark argv paramter as unused. Convert to old style definition.
399 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
400 * ia64-asmtab.c: Regnerate.
402 2000-12-09 Nick Clifton <nickc@redhat.com>
404 * m32r-dis.c (print_insn): Prevent re-read of instruction from
407 * fr30-dis.c: Regenerate.
409 2000-12-08 Peter Targett <peter.targett@arccores.com>
411 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
412 * Makefile.am (C_FILES): Add arc-ext.c.
413 (ALL_MACHINES) Add arc-ext.lo.
414 (INCLUDES) Add opcode directory to list.
415 New dependency entry for arc-ext.lo.
416 * disassemble.c (disassembler): Correct call to
417 arc_get_disassembler.
418 * arc-opc.c: New update for ARC, including full base
419 instructions for ARC variants.
420 * arc-dis.h, arc-dis.c: New update for ARC, including
421 extensibility functionality.
422 * arc-ext.h, arc-ext.c: New files for handling extensibility.
424 2000-12-03 Chris Demetriou cgd@sibyte.com
426 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
427 MOD_HILO, and MOD_LO macros.
429 * mips-opc.c (M1, M2): Delete.
430 (mips_builtin_opcodes): Remove all uses of M1.
432 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
433 instructions take "G" format second operands and use the
435 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
437 Delete "sel" code operands from mfc1 and mtc1.
438 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
441 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
442 Chris Demetriou cgd@sibyte.com
444 * mips-opc.c (mips_builtin_opcodes): Finish additions
445 for MIPS32 support, and clean up existing entries for
446 aesthetics, consistency with the MIPS32 ISA, and
447 with consistency the rest of the table.
449 2000-12-01 Nick Clifton <nickc@redhat.com>
451 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
454 2000-12-01 Chris Demetriou <cgd@sibyte.com>
456 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
457 specifiers. Update 'B' for new constant names, and remove
459 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
460 near the top of the array, so they are disassembled properly.
461 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
462 code for MIPS32. Update "clo" and "clz" to use 'U' operand
463 specifier. Add 'H' format specifier variants for "mfc1,"
464 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
465 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
466 "wait" variant which uses 'J' operand specifier.
468 * mips-dis.c (set_mips_isa_type): Update to use
469 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
470 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
471 * mips-opc.c (I32): New constant for instructions added in
474 (mips_builtin_opcodes) Replace all uses of P4 with I32.
476 * mips-dis.c (set_mips_isa_type): Add cases for
477 bfd_mach_mips5 and bfd_mach_mips64.
478 * mips-opc.c (I64): New definitions.
480 * mips-dis.c (set_mips_isa_type): Add case for
483 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
485 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
486 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
487 Initialize variable dc to NULL.
488 (print_insn_shx): Remove unused label d_reg_n.
490 2000-11-24 Nick Clifton <nickc@redhat.com>
492 * arm-opc.h: Add new opcode formatting parameter 'B'.
493 (arm_opcodes): Add XScale, v5, and v5te instructions.
494 (thumb_opcodes): Add v5t instructions.
496 * arm-dis.c (print_insn_arm): Handle new 'B' format
498 (print_insn_thumb): Decode BLX(1) instruction.
500 2000-11-21 Chris Demetriou <cgd@sibyte.com>
502 * mips-opc.c: Fix file header comment.
504 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
506 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
507 print_insn_cris_with_register_prefix.
509 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
511 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
513 2000-11-07 Matthew Green <mrg@redhat.com>
515 * cgen-dis.in (print_insn): All insns which can fit into insn_value
516 must be loaded there in their entirety.
518 2000-10-20 Jakub Jelinek <jakub@redhat.com>
520 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
521 (compute_arch_mask): Add v8plusb and v9b machines.
522 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
523 * sparc-opc.c: Support for Cheetah instruction set.
524 (prefetch_table): Add #invalidate.
526 2000-10-16 Nick Clifton <nickc@redhat.com>
528 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
530 2000-10-06 Dave Brolley <brolley@redhat.com>
532 * fr30-desc.h: Regenerate.
533 * m32r-desc.h: Regenerate.
534 * m32r-ibld.c: Regenerate.
536 2000-10-05 Jim Wilson <wilson@redhat.com>
538 * ia64-ic.tbl: Update from Intel.
539 * ia64-asmtab.c: Regenerate.
541 2000-10-04 Kazu Hirata <kazu@hxi.com>
543 * ia64-gen.c: Convert C++-style comments to C-style comments.
544 * tic54x-dis.c: Likewise.
546 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
548 Changes to add dollar prefix to registers for files where user symbols
549 don't have a leading underscore. Fix formatting.
550 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
551 (format_reg): Add parameter with_reg_prefix. All callers changed.
552 (print_with_operands): Ditto.
553 (print_insn_cris_generic): Renamed from print_insn_cris, add
554 parameter with_reg_prefix.
555 (print_insn_cris_with_register_prefix,
556 print_insn_cris_without_register_prefix, cris_get_disassembler):
558 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
560 2000-09-22 Jim Wilson <wilson@redhat.com>
562 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
563 gt, ge, ngt, and nge.
564 * ia64-asmtab.c: Regenerate.
566 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
567 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
568 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
569 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
570 * ia64-asmtab.c: Regnerate.
572 2000-09-13 Anders Norlander <anorland@acc.umu.se>
574 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
575 Add mfc0 and mtc0 with sub-selection values.
576 Add clo and clz opcodes.
577 Add msub and msubu instructions for MIPS32.
578 Add madd/maddu aliases for mad/madu for MIPS32.
579 Support wait, deret, eret, movn, pref for MIPS32.
580 Support tlbp, tlbr, tlbwi, tlbwr.
583 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
584 (print_insn_arg): Handle 'H' args.
585 (set_mips_isa_type): Recognize 4K.
586 Use CPU_* defines instead of hardcoded numbers.
588 2000-09-11 Catherine Moore <clm@redhat.com>
590 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
591 (d30v_format_tab): Use Rb2 for modinc and moddec.
593 2000-09-07 Catherine Moore <clm@redhat.com>
595 * d30v-opc.c (d30v_format_tab): Use format Ra for
598 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
600 * configure: Rebuilt with new libtool.m4.
602 2000-09-05 Nick Clifton <nickc@redhat.com>
604 * configure: Regenerate.
605 * po/opcodes.pot: Regenerate.
607 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
609 * acinclude.m4: Include libtool and gettext macros from the
611 * aclocal.m4, configure: Rebuilt.
613 2000-08-30 Kazu Hirata <kazu@hxi.com>
615 * tic80-dis.c: Fix formatting.
617 2000-08-29 Kazu Hirata <kazu@hxi.com>
619 * w65-dis.c: Fix formatting.
621 2000-08-28 Mark Hatle <mhatle@mvista.com>
623 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
624 (powerpc_opcodes): Add table entries for PPC 405 instructions.
625 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
626 instructions. Added extended mnemonic mftbl as defined in the
627 405GP manual for all PPCs.
629 2000-08-28 Jim Wilson <wilson@redhat.com>
631 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
632 call. Change last goto to use failed instead of done.
634 2000-08-28 Dave Brolley <brolley@redhat.com>
636 * cgen-ibld.in (cgen_put_insn_int_value): New function.
637 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
638 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
639 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
640 * cgen-dis.in (read_insn): New static function.
641 (print_insn): Use read_insn to read the insn into the buffer and set
643 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
645 * fr30-asm.c: Regenerated.
646 * fr30-desc.c: Regenerated.
647 * fr30-desc.h: Regenerated.
648 * fr30-dis.c: Regenerated.
649 * fr30-ibld.c: Regenerated.
650 * fr30-opc.c: Regenerated.
651 * fr30-opc.h: Regenerated.
652 * m32r-asm.c: Regenerated.
653 * m32r-desc.c: Regenerated.
654 * m32r-desc.h: Regenerated.
655 * m32r-dis.c: Regenerated.
656 * m32r-ibld.c: Regenerated.
657 * m32r-opc.c: Regenerated.
659 2000-08-28 Kazu Hirata <kazu@hxi.com>
661 * tic30-dis.c: Fix formatting.
663 2000-08-27 Kazu Hirata <kazu@hxi.com>
665 * sh-dis.c: Fix formatting.
667 2000-08-24 David Edelsohn <dje@watson.ibm.com>
669 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
671 2000-08-24 Kazu Hirata <kazu@hxi.com>
673 * z8k-dis.c: Fix formatting.
675 2000-08-16 Jim Wilson <wilson@redhat.com>
677 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
678 break, mov-immediate, nop.
679 * ia64-opc-f.c: Delete fpsub instructions.
680 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
681 address operand. Rewrite using macros to avoid long lines.
682 * ia64-opc.h (POSTINC): Define.
683 * ia64-asmtab.c: Regenerate.
685 2000-08-15 Jim Wilson <wilson@redhat.com>
687 * ia64-ic.tbl: Add missing entries.
689 2000-08-08 Jason Eckhardt <jle@redhat.com>
691 * i860-dis.c (print_br_address): Change third argument from int
694 2000-08-07 Richard Henderson <rth@redhat.com>
696 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
697 for MLI templates. Handle IA64_OPND_TGT64.
699 2000-08-04 Ben Elliston <bje@redhat.com>
701 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
704 2000-08-02 Jim Wilson <wilson@redhat.com>
706 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
708 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
710 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
711 Change return type from void to int. Check the combination
712 of operands, return 1 if valid. Fix to avoid BUF overflow.
713 Report undefined combinations of operands in COMMENT.
714 Report internal errors to stderr. Output the adiw/sbiw
715 constant operand in both decimal and hex.
716 (print_insn_avr): Disassemble ldd/std with displacement of 0
717 as ld/st. Check avr_operand () return value, handle invalid
718 combinations of operands like unknown opcodes.
720 2000-07-28 Ben Elliston <bje@redhat.com>
722 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
723 (run-cgen, stamp-m32r, stamp-fr30): New targets.
724 * Makefile.in: Regenerate.
725 * configure.in: Add --enable-cgen-maint option.
726 * configure: Regenerate.
728 2000-07-26 Dave Brolley <brolley@redhat.com>
730 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
731 (cgen_hw_lookup_by_num): Ditto.
732 (cgen_operand_lookup_by_name): Ditto.
733 (print_address): Ditto.
734 (print_keyword): Ditto.
735 * cgen-dis.c (hash_insn_array): Mark unused parameters with
737 * cgen-asm.c (hash_insn_array): Mark unused parameters with
739 (cgen_parse_keyword): Ditto.
741 2000-07-22 Jason Eckhardt <jle@redhat.com>
743 * i860-dis.c: New file.
744 (print_insn_i860): New function.
745 (print_br_address): New function.
746 (sign_extend): New function.
747 (BITWISE_OP): New macro.
748 (I860_REG_PREFIX): New macro.
749 (grnames, frnames, crnames): New structures.
751 * disassemble.c (ARCH_i860): Define.
752 (disassembler): Add check for bfd_arch_i860 to set disassemble
753 function to print_insn_i860.
755 * Makefile.in (CFILES): Added i860-dis.c.
756 (ALL_MACHINES): Added i860-dis.lo.
757 (i860-dis.lo): New dependences.
759 * configure.in: New bits for bfd_i860_arch.
761 * configure: Regenerated.
763 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
765 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
766 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
767 (cris-dis.lo, cris-opc.lo): New rules.
768 * Makefile.in: Rebuild.
769 * configure.in (bfd_cris_arch): New target.
770 * configure: Rebuild.
771 * disassemble.c (ARCH_cris): Define.
772 (disassembler): Support ARCH_cris.
773 * cris-dis.c, cris-opc.c: New files.
774 * po/POTFILES.in, po/opcodes.pot: Regenerate.
776 2000-07-11 Jakub Jelinek <jakub@redhat.com>
778 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
779 Reported by Bill Clarke <llib@computer.org>.
781 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
783 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
784 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
786 2000-07-09 Alan Modra <alan@linuxcare.com.au>
788 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
789 fput_const, extract_3, extract_5_load, extract_5_store,
790 extract_5r_store, extract_5R_store, extract_10U_store,
791 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
792 extract_12, extract_17, extract_22): Prototype.
793 (print_insn_hppa): Rename inner block opcode -> opc to avoid
794 shadowing outer block.
797 2000-07-05 DJ Delorie <dj@redhat.com>
801 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
803 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
805 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
807 * avr-dis.c (avr_operand): Change _ () to _() around all strings
808 marked for translation (exception from the usual coding style).
809 (print_insn_avr): Initialize insn2 to avoid warnings.
811 2000-07-03 Kazu Hirata <kazu@hxi.com>
813 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
814 * h8500-dis.c: Fix formatting.
816 2000-07-01 Alan Modra <alan@linuxcare.com.au>
818 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
819 (CLEANFILES): Add DEPA.
820 * Makefile.in: Regenerate.
822 2000-06-26 Scott Bambrough <scottb@netwinder.org>
824 * arm-dis.c (regnames): Add an additional register set to match
825 the set used by GCC. Make it the default.
827 2000-06-22 Alan Modra <alan@linuxcare.com.au>
829 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
831 * Makefile.in: Regenerate.
833 2000-06-20 H.J. Lu <hjl@gnu.org>
835 * Makefile.am: Rebuild dependency.
836 * Makefile.in: Rebuild.
838 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
840 * Makefile.in, configure: regenerate
841 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
843 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
845 * configure.in: Recognize m68hc12 and m68hc11.
846 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
847 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
848 and opcode generation for m68hc11 and m68hc12.
850 2000-06-16 Nick Duffek <nsd@redhat.com>
852 * disassemble.c (disassembler): Refer to the PowerPC 620 using
853 bfd_mach_ppc_620 instead of 620.
855 2000-06-12 Kazu Hirata <kazu@hxi.com>
857 * h8300-dis.c: Fix formatting.
858 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
861 2000-06-09 Denis Chertykov <denisc@overta.ru>
863 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
865 2000-06-07 Denis Chertykov <denisc@overta.ru>
867 * avr-dis.c: completely rewritten.
869 2000-06-02 Kazu Hirata <kazu@hxi.com>
871 * h8300-dis.c: Follow the GNU coding style.
872 (bfd_h8_disassemble) Fix a typo.
874 2000-06-01 Kazu Hirata <kazu@hxi.com>
876 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
877 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
878 correctly. Fix a typo.
880 2000-05-31 Nick Clifton <nickc@redhat.com>
882 * opintl.h (_(String)): Explain why dgettext is used instead of
885 2000-05-30 Nick Clifton <nickc@redhat.com>
887 * opintl.h (gettext, dgettext, dcgettext, textdomain,
888 bindtextdomain): Replace defines with those from intl/libgettext.h
889 to quieten gcc warnings.
891 2000-05-26 Alan Modra <alan@linuxcare.com.au>
893 * Makefile.am: Update dependencies with "make dep-am"
894 * Makefile.in: Regenerate.
896 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
898 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
899 sign-extending operands.
901 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
903 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
906 2000-05-21 Nick Clifton <nickc@redhat.com>
908 * Makefile.am (LIBIBERTY): Define.
910 2000-05-19 Diego Novillo <dnovillo@redhat.com>
912 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
913 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
914 (reg_names): Rename to std_reg_names. Change it to a char **
916 (std_reg_names): New name for reg_names.
917 (set_mips_isa_type): Set reg_names to point to std_reg_names by
920 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
922 * fr30-desc.h: Partially regenerated to account for changed
923 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
924 * m32r-desc.h: Ditto.
926 2000-05-15 Nick Clifton <nickc@redhat.com>
928 * arm-opc.h: Use upper case for flasg in MSR and MRS
929 instructions. Allow any bit to be set in the field_mask of
932 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
933 field_mask of an MSR instruction.
935 2000-05-11 Thomas de Lellis <tdel@windriver.com>
937 * arm-opc.h: Disassembly of thumb ldsb/ldsh
938 instructions changed to ldrsb/ldrsh.
940 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
942 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
943 target addresses for 'jal' and 'j'.
945 2000-05-10 Geoff Keating <geoffk@redhat.com>
947 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
948 also available in common mode when powerpc syntax is being used.
950 2000-05-08 Alan Modra <alan@linuxcare.com.au>
952 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
953 (dummy_print_address): Ditto.
955 2000-05-04 Timothy Wall <twall@redhat.com>
959 * disassemble.c (disassembler): Add ARCH_tic54x.
960 * configure.in: Added tic54x target.
962 * Makefile.am: Add tic54x dependencies.
963 * Makefile.in: Ditto.
965 2000-05-03 J.T. Conklin <jtc@redback.com>
967 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
968 vector unit operands.
969 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
970 unit instruction formats.
971 (PPCVEC): New macro, mask for vector instructions.
972 (powerpc_operands): Add table entries for above operand types.
973 (powerpc_opcodes): Add table entries for vector instructions.
975 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
976 (print_insn_little_powerpc): Likewise.
977 (print_insn_powerpc): Prepend 'v' when printing vector registers.
979 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
981 * configure.in: Add bfd_powerpc_64_arch.
982 * disassemble.c (disassembler): Use print_insn_big_powerpc for
985 2000-04-24 Nick Clifton <nickc@redhat.com>
987 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
990 2000-04-23 Denis Chertykov <denisc@overta.ru>
992 * avr-dis.c (reg_fmul_d): New. Extract destination register from
994 (reg_fmul_r): New. Extract source register from FMUL instruction.
995 (reg_muls_d): New. Extract destination register from MULS instruction.
996 (reg_muls_r): New. Extract source register from MULS instruction.
997 (reg_movw_d): New. Extract destination register from MOVW instruction.
998 (reg_movw_r): New. Extract source register from MOVW instruction.
999 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1000 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1002 2000-04-22 Timothy Wall <twall@redhat.com>
1004 * ia64-gen.c (general): Add an ordered table of primary
1005 opcode names, as well as priority fields to disassembly data
1006 structures to enforce a preferred disassembly format based on the
1007 ordering of the opcode tables.
1008 (load_insn_classes): Show a useful message if IC tables are missing.
1009 (load_depfile): Ditto.
1010 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1011 distinguish preferred disassembly.
1012 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1013 format. Fix incorrect flag on fma.s/fma.s.s0.
1014 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1015 the highest priority.
1016 * ia64-opc-b.c: Use more abbreviations.
1017 * ia64-asmtab.c: Regenerate.
1019 2000-04-21 Jason Eckhardt <jle@redhat.com>
1021 * hppa-dis.c (extract_16): New function.
1022 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1023 new operand types l,y,&,fe,fE,fx.
1025 2000-04-21 Richard Henderson <rth@redhat.com>
1026 David Mosberger <davidm@hpl.hp.com>
1027 Timothy Wall <twall@redhat.com>
1028 Bob Manson <manson@charmed.cygnus.com>
1029 Jim Wilson <wilson@redhat.com>
1031 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1032 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1033 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1035 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1036 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1037 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1038 * Makefile.in: Rebuild.
1039 * configure Rebuild.
1040 * configure.in (bfd_ia64_arch): New target.
1041 * disassemble.c (ARCH_ia64): Define.
1042 (disassembler): Support ARCH_ia64.
1043 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1044 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1045 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1046 ia64-war.tbl, ia64-waw.tbl: New files.
1048 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1050 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1051 (disassemble): Use them.
1053 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1055 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1056 * Makefile.am: Update dependencies.
1057 * Makefile.in: Regenerate.
1059 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1061 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1062 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1063 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1064 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1065 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1066 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1067 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1068 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1069 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1070 ansidecl.h as sysdep.h includes it.
1072 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1074 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1075 --enable-build-warnings option.
1076 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1077 * Makefile.in, configure: Re-generate.
1079 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1081 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1082 stc GBR,@-<REG_N> is available for arch_sh1_up.
1083 Group parallel processing insn with identical mnemonics together.
1084 Make three-operand psha / pshl come first.
1086 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1088 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1089 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1090 (sh_arg_type): Add A_PC.
1091 (sh_table): Update entries using immediates. Add repeat.
1092 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1093 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1095 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1097 * po/opcodes.pot: Regenerate.
1099 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1100 (DEP): Quote when passing vars to sub-make. Add warning message
1102 (DEP1): Rewrite for "gcc -MM".
1103 (CLEANFILES): Add DEP2.
1104 Update dependencies.
1105 * Makefile.in: Regenerate.
1107 2000-04-03 Denis Chertykov <denisc@overta.ru>
1109 * avr-dis.c: Syntax cleanup.
1110 (add0fff): Print the pc relative address as a signed number.
1111 (add03f8): Likewise.
1113 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1115 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1116 the parameter ATTRIBUTE_UNUSED.
1117 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1119 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1121 * m10300-opc.c: SP-based offsets are always unsigned.
1123 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1125 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1126 [branch always] instead of "undefined".
1128 2000-03-27 Nick Clifton <nickc@redhat.com>
1130 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1131 short instructions, from end of list of long instructions.
1133 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1135 * Makefile.am (CFILES): Add avr-dis.c.
1136 (ALL_MACHINES): Add avr-dis.lo.
1138 2000-03-27 Alan Modra <alan@linuxcare.com>
1140 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1142 (print_insn_avr): Call function via pointer in K&R compatible way.
1143 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1144 add0fff, add03f8): Convert to old style function declaration and
1146 (avrdis_opcode): Add prototype.
1148 2000-03-27 Denis Chertykov <denisc@overta.ru>
1150 * avr-dis.c: New file. AVR disassembler.
1151 * configure.in (bfd_avr_arch): New architecture support.
1152 * disassemble.c: Likewise.
1153 * configure: Regenerate.
1155 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1157 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1159 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1161 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1162 flag to determine if operand is pc-relative.
1164 (d30v_format_table):
1165 (REL6S3): Renamed from IMM6S3.
1166 Added flag OPERAND_PCREL.
1167 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1168 added flag OPERAND_PCREL.
1169 (IMM12S3U): Replaced with REL12S3.
1170 (SHORT_D2, LONG_D): Delay target is pc-relative.
1171 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1172 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1173 using the REL* operands.
1174 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1175 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1176 LONG_Db, using REL* operands.
1177 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1178 (d30v_opcode_table): Use new *r formats.
1180 2000-02-28 Nick Clifton <nickc@redhat.com>
1182 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1183 'signed_overflow_ok_p'.
1185 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1187 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1188 name of the libtool directory.
1189 * Makefile.in: Rebuild.
1191 2000-02-24 Nick Clifton <nickc@redhat.com>
1193 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1194 (cgen_clear_signed_overflow_ok): New function.
1195 (cgen_signed_overflow_ok_p): New function.
1197 2000-02-23 Andrew Haley <aph@redhat.com>
1199 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1200 m32r-ibld.c, m32r-opc.h: Rebuild.
1202 2000-02-23 Linas Vepstas <linas@linas.org>
1204 * i370-dis.c, i370-opc.c: New.
1206 * disassemble.c (ARCH_i370): Define.
1207 (disassembler): Handle it.
1209 * Makefile.am: Add support for Linux/IBM 370.
1210 * configure.in: Likewise.
1212 * Makefile.in: Regenerate.
1213 * configure: Likewise.
1215 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1217 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1218 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1221 2000-02-22 Andrew Haley <aph@redhat.com>
1223 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1225 * mips-opc.c (G6): New define.
1226 (mips_builtin_op): Add "move" definition for -gp32.
1228 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1230 From Grant Erickson <gerickso@Brocade.COM>:
1231 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1233 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
1235 * dis-buf.c (buffer_read_memory): Change `length' param and all int
1238 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1240 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1241 (print_insn_ppi): Likewise.
1242 (print_insn_shx): Use info->mach to select appropriate insn set.
1243 Add support for sh-dsp. Remove FD_REG_N support.
1244 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1245 (sh_arg_type): Likewise. Remove FD_REG_N.
1246 (sh_dsp_reg_nums): New enum.
1247 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1248 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1249 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1250 (arch_sh3_dsp_up): Likewise.
1251 (sh_opcode_info): New field: arch.
1252 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1253 D_REG_N. Fill in arch field. Add sh-dsp insns.
1255 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
1257 * arm-dis.c: Change flavor name from atpcs-special to
1258 special-atpcs to prevent name conflict in gdb.
1259 (get_arm_regname_num_options, set_arm_regname_option,
1260 get_arm_regnames): New functions. API to access the several
1261 flavor of register names. Note: Used by gdb.
1262 (print_insn_thumb): Use the register name entry from the currently
1263 selected flavor for LR and PC.
1265 2000-02-10 Nick Clifton <nickc@redhat.com>
1267 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1269 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1270 "mulsh.h" instructions.
1271 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1273 (print_insn_mcore): Add support for little endian targets.
1274 Add support for MULSH and OPSR classes.
1276 2000-02-07 Nick Clifton <nickc@redhat.com>
1278 * arm-dis.c (parse_arm_diassembler_option): Rename again.
1279 Previous delat did not take.
1281 2000-02-03 Timothy Wall <twall@redhat.com>
1283 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
1284 to adjust target address bounds checking and calculate the
1285 appropriate octet offset into data.
1287 2000-01-27 Nick Clifton <nickc@redhat.com>
1289 * arm-dis.c: (parse_disassembler_option): Rename to
1290 parse_arm_disassembler_option and allow to be exported.
1292 * disassemble.c (disassembler_usage): New function: Print out any
1293 target specific disassembler options.
1294 Call arm_disassembler_options() if the ARM architecture is being
1297 * arm-dis.c (NUM_ELEM): Define this macro if not already
1299 (arm_regname): New struct type for ARM register names.
1300 (arm_toggle_regnames): Delete.
1301 (parse_disassembler_option): Use register name structure.
1302 (print_insn): New function: Combines duplicate code found in
1303 print_insn_big_arm and print_insn_little_arm.
1304 (print_insn_big_arm): Call print_insn.
1305 (print_insn_little_arm): Call print_insn.
1306 (print_arm_disassembler_options): Display list of supported,
1307 ARM specific disassembler options.
1309 2000-01-27 Thomas de Lellis <tdel@windriver.com>
1311 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1312 ARM_STT_16BIT flag as Thumb code symbols.
1314 * arm-dis.c (printf_insn_little_arm): Ditto.
1316 2000-01-25 Thomas de Lellis <tdel@windriver.com>
1318 * arm-dis.c (printf_insn_thumb): Prevent double dumping
1319 of raw thumb instructions.
1321 2000-01-20 Nick Clifton <nickc@redhat.com>
1323 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1325 2000-01-03 Nick Clifton <nickc@cygnus.com>
1327 * arm-dis.c (streq): New macro.
1328 (strneq): New macro.
1329 (force_thumb): ew local variable.
1330 (parse_disassembler_option): New function: Parse a single, ARM
1331 specific disassembler command line switch.
1332 (parse_disassembler_option): Call parse_disassembler_option to
1333 parse individual command line switches.
1334 (print_insn_big_arm): Check force_thumb.
1335 (print_insn_little_arm): Check force_thumb.
1337 For older changes see ChangeLog-9899
1343 version-control: never