1 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
3 * d10v-opc.c (OPERAND_FLAG): Split into:
4 (OPERAND_FFLAG, OPERAND_CFLAG) .
8 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
10 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
11 field for all INSN_MACRO's.
14 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
16 * mips-opc.c (sync,cache): These are 3900 insns.
18 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
20 sh-opc.h (sh_table): Remove ftst/nan.
23 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
25 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
26 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
28 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
32 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
34 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
35 Add tx49 insns and configury.
38 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
40 * mips-opc.c (ffc, ffs): Fix mask.
43 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
45 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
49 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
51 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
53 Added VR5400 instructions.
54 (N5): New cpu-id macro.
56 (WR_HILO, RD_HILO, MOD_HILO): New macros.
58 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
60 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
61 (WR_HILO, RD_HILO, MOD_HILO): New macros.
63 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
65 * v850-dis.c (disassemble): Replace // with /* ... */
67 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
69 * sparc-opc.c: Add wr & rd for v9a asr's.
70 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
71 (v9a_asr_reg_names): New variable.
72 Patch from David Miller <davem@vger.rutgers.edu>.
74 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
76 * sparc-opc.c (v9notv9a): New insn type.
77 (IMPDEP): Move to the end to not conflict with edge8 et al.
78 Patch from David Miller <davem@vger.rutgers.edu>.
80 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
82 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
84 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
86 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
88 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
90 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
91 of disassemble_info structure to determine if an overlay address
92 has a matching symbol in low memory.
94 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
95 new symbol_at_address_func field in disassemble_info structure.
97 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
99 * v850-opc.c (extract_d22): Use signed arithmatic.
101 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
103 * mips-opc.c: Three op mult is not an ISA insn.
105 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
107 * mips-opc.c: Fix formatting.
109 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
111 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
112 than assuming that char is signed. Explicitly sign extend 16 bit
113 values, rather than assuming that short is 16 bits.
114 (OP_sI, OP_J, OP_DIR): Likewise.
117 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
119 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
123 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
125 * v850-opc.c: Fix typo in comment.
127 * v850-dis.c (disassemble): Add test of processor type when
130 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
132 * configure.in: Use a diversion to set enable_shared before the
133 arguments are parsed.
134 * configure: Rebuild.
136 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
138 * m68k-opc.c (TBL1): Use ! rather than `.
139 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
141 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
143 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
145 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
147 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
150 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
151 * aclocal.m4: Rebuild with new libtool.
152 * configure: Rebuild.
155 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
157 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
160 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
162 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
164 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
166 * v850-opc.c (v850_opcodes): Further rearrangements.
169 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
171 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
174 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
176 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
179 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
181 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
183 * mips16-opc.c: Added mips16 sdbbp.
186 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
188 * v850-opc.c: Initialise processors field of v850_opcode structure.
191 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
193 Merge changes from Martin Hunt:
195 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
197 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
198 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
199 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
201 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
203 * d30v-dis.c (print_insn): First operand of d*i (delayed
204 branch) instructions is relative.
206 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
207 (d30v_operand_table): Add IMM6S3 type.
208 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
210 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
211 and cmp instructions.
213 * d30v-opc.c: Correct entries for repeat*, and sat*.
214 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
215 types. Correct several formats.
217 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
219 * d30v-opc.c (pre_defined_registers): Change control registers.
221 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
222 SHORT_C2. Manual was incorrect.
224 * d30v-dis.c (lookup_opcode): Return value now indicates
225 if an opcode has a short and a long form. Used for deciding
226 to append a ".s" or ".l".
227 (print_insn): Append a ".s" to an instruction if it is
228 the short form and ".l" if it is a long form. Do not append
229 anything if the instruction has only one possible size.
231 * d30v-opc.c: Change mulx2h to require an even register.
232 New form: SHORT_A2; a SHORT_A form that needs an even
233 register as the first operand.
235 * d30v-dis.c (print_insn_d30v): Fix problem where the last
236 instruction was not being disassembled if there were an odd
237 number of instructions.
239 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
243 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
245 * v850-dis.c (disassemble): Improved display of register lists.
248 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
250 * sparc-opc.c (sparc_opcodes): Fix assembler args to
251 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
252 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
253 fandnot1s, fandnot2s.
255 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
257 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
259 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
261 * cgen-asm.c (cgen_parse_address): New argument resultp.
263 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
265 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
267 * mn10200-dis.c (disassemble): PC relative instructions are
268 relative to the next instruction, not the current instruction.
270 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
272 * v850-dis.c (disassemble): Only signed extend values that are not
273 returned by extract functions.
274 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
276 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
278 * v850-opc.c: Update comments. Remove use of
279 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
281 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
283 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
285 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
287 * configure: Rebuilt with latest devo autoconf for NT support.
289 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
291 * v850-dis.c (disassemble): Use curly brace syntax for register
294 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
295 where r0 is being used as a destination register.
298 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
300 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
304 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
306 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
307 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
308 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
309 Add insns to access SGR and DBR.
310 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
313 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
315 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
318 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
320 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
321 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
324 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
326 * configure (cgen_files): Add support for v850e target.
327 * configure.in (cgen_files): Add support for v850e target.
329 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
331 * configure (cgen_files): Add support for v850eq target.
332 * configure.in (cgen_files): Add support for v850eq target.
335 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
337 * configure.in (bfd_arc_arch): Add.
338 * configure: Rebuild.
339 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
340 * Makefile.in: Rebuild.
341 * arc-dis.c, arc-opc.c: New files.
342 * disassemble.c (ARCH_all): Define ARCH_arc.
343 (disassembler): Add ARC support.
345 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
348 * v850-dis.c (disassemble): Add support for v850EQ instructions.
350 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
351 (v850_opcodes): Add v850EQ instructions.
353 * v850-dis.c (disassemble): Add support for v850E instructions.
355 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
356 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
357 insert_spe, extract_spe): New Functions.
358 (v850_opcodes): Add v850E instructions.
361 * v850-opc.c: Reorganised and re-layed out to improve readability
364 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
366 * configure: Rebuild with autoconf 2.12.1.
368 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
370 * aclocal.m4, configure: Rebuild with new automake patches.
372 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
374 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
375 * acinclude.m4: Just include acinclude.m4 from BFD.
376 * aclocal.m4, configure: Rebuild.
378 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
380 * Makefile.am: New file, based on old Makefile.in.
381 * acconfig.h: New file.
382 * acinclude.m4: New file.
383 * stamp-h.in: New file.
384 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
385 Removed shared library handling; now handled by libtool. Replace
386 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
387 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
388 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
389 handling in AC_OUTPUT.
390 * dep-in.sed: Change .o to .lo.
391 * Makefile.in: Now built with automake.
392 * aclocal.m4: Now built with aclocal.
393 * config.in, configure: Rebuild.
395 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
397 * mips-opc.c: Fix typo/thinko in "eret" instruction.
400 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
402 * mips-opc.c: Fix coding of mtsa.
405 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
407 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
409 * sparc-dis.c (sorted_opcodes): New static local.
410 (struct opcode_hash): `opcode' is pointer to const element.
411 (build_hash): First arg is now table of sorted pointers.
412 (print_insn_sparc): Sort opcodes by sorting table of pointers.
413 (compare_opcodes): Update.
415 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
417 * cgen-opc.c: #include <ctype.h>.
418 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
419 Handle case insensitive hashing.
420 (hash_keyword_value): Change type of `value' to unsigned int.
422 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
424 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
425 precision FP, mark it as such. Likewise for double precision
426 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
429 (mips_builtin_opcodes): Remove non-existant r5900 instructions
433 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
435 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
436 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
439 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
441 * ppc-opc.c (extract_nsi): make unsigned expression signed before
443 (UNUSED): remove one level of parens, so MSVC doesn't choke on
444 nesting depth when all the macros are expanded.
446 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
448 * sparc-opc.c: The fcmp v9a instructions take an integer register
449 as a destination, not a floating point register. From Christian
450 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
452 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
454 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
455 syntax. From Roman Hodek
456 <rnhodek@faui22c.informatik.uni-erlangen.de>.
458 * i386-dis.c (twobyte_has_modrm): Fix pand.
460 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
462 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
464 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
466 * arm-dis.c: Add prototypes for arm_decode_shift and
469 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
471 * mips-opc.c: Add r3900 insns.
473 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
475 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
476 print delay slot instructions on the same line. When using a PC
477 relative load, add a comment with the value being loaded if it can
480 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
482 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
483 to pushS/popS for segment regs and byte constant so that
484 pushw/popw printed when in 16 bit data mode.
486 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
487 print cbtw, cwtd in 16 bit data mode.
488 * i386-dis.c (putop): extra case W to support above.
490 * i386-dis.c (print_insn_x86): print addr32 prefix when given
491 address size prefix in 16 bit address mode.
493 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
495 * sh-dis.c: Reindent. Rename local variable fprintf to
498 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
500 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
502 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
504 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
506 * mips16-opc.c (mip16_opcodes): same.
508 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
510 * m68k-opc.c (moveb): Change $d to %d.
512 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
514 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
515 (twobyte_has_modrm): Likewise.
517 (OP_MMX, OP_EM, OP_MS): New static functions.
519 * i386-dis.c: Revert patch of April 4. The output now matches
522 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
524 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
527 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
529 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
531 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
533 * Makefile.in (install): Depend upon installdirs.
534 (installdirs): New target.
536 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
538 From Thomas Graichen <graichen@rzpd.de>:
539 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
540 * configure: Rebuild.
542 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
544 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
545 Delete string{,s}.h support.
547 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
549 * cgen-asm.c (cgen_parse_operand_fn): New global.
550 (cgen_parse_{{,un}signed_integer,address}): Update call to
551 cgen_parse_operand_fn.
552 (cgen_init_parse_operand): New function.
553 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
554 from cgen_asm_init_parse.
555 (m32r_cgen_assemble_insn): New operand `errmsg'.
556 Delete call to as_bad, return error message to caller.
557 (m32r_cgen_asm_hash_keywords): #if 0 out.
559 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
561 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
563 [case 'J']: Fix typo in register name.
565 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
567 * configure.in: Substitute SHLIB_LIBS.
568 * configure: Rebuild.
569 * Makefile.in (SHLIB_LIBS): New variable.
570 ($(SHLIB)): Use $(SHLIB_LIBS).
572 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
574 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
576 * cgen-opc.c (hash_keyword_name): Improve algorithm.
578 * disassemble.c (disassembler): Handle m32r.
580 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
582 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
583 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
584 * Makefile.in (CFILES): Add them.
585 (ALL_MACHINES): Add them.
586 (dependencies): Regenerate.
587 * configure.in (cgen_files): New variable.
588 (bfd_m32r_arch): Add entry.
589 * configure: Regenerate.
591 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
593 * configure.in: Correct file names for bfd_mn10[23]00_arch.
594 * configure: Rebuild.
596 * Makefile.in: Rebuild dependencies.
598 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
600 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
603 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
605 * Branched binutils 2.8.
607 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
609 * m10200-dis.c: Rename from mn10200-dis.c.
610 * m10200-opc.c: Rename from mn10200-opc.c.
611 * m10300-dis.c: Rename from mn10300-dis.c
612 * m10300-opc.c: Rename from mn10300-opc.c.
613 * Makefile.in: Update accordingly.
615 * mips16-opc.c: Add mul and dmul macros.
617 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
619 * makefile.vms: Update CFLAGS, add clean target.
621 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
623 * mips-opc.c: Add "wait". From Ralf Baechle
624 <ralf@gnu.ai.mit.edu>.
626 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
627 * configure, config.in: Rebuild.
628 * sysdep.h: Include <stdlib.h> if it exists.
629 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
631 * Makefile.in: Rebuild dependencies.
633 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
635 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
636 Andrew Bray <andy@madhouse.demon.co.uk>.
638 * mips-opc.c: Add cast when setting mips_opcodes.
640 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
642 * v850-dis.c (disassemble): Fix sign extension problem.
643 * v850-opc.c (extract_d*): Fix sign extension problems to make
644 disassembly calculate branch offsets correctly.
646 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
648 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
650 * mips-opc.c: Add dctr and dctw.
653 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
655 * d30v-dis.c (print_insn): Change the way signed constants
658 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
660 * Makefile.in (BFD_H): New variable.
661 (HFILES): New variable.
662 (CFILES): Add all C files.
663 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
664 Delete old dependencies, and build new ones.
665 * dep-in.sed: New file.
667 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
669 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
671 start-sanitize-coldfire
672 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
674 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
677 end-sanitize-coldfire
678 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
680 * mn10200-opc.c: Change "trap" to "syscall".
681 * mn10300-opc.c: Add new "syscall" instruction.
683 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
685 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
686 mulul insns on the coldfire.
688 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
690 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
691 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
692 (print_insn_little_arm): Likewise.
694 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
696 Based on patches from H.J. Lu <hjl@lucon.org>:
697 * i386-dis.c (fetch_data): Add prototype.
698 * m68k-dis.c (fetch_data): Add prototype.
699 (dummy_print_address): Add prototype. Make static.
700 * ppc-opc.c (valid_bo): Add prototype.
701 * sparc-dis.c (build_hash_table): Add prototype.
702 (is_delayed_branch, compute_arch_mask): Add prototypes.
703 (print_insn_sparc): Make several local variables const.
704 (compare_opcodes): Change arguments to const PTR. Add prototype.
705 * sparc-opc.c (arg): Change name field to be const.
706 (lookup_name, lookup_value): Add prototypes. Change table and
707 name parameters to be const.
708 (sparc_encode_asi): Change name parameter to be const.
709 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
710 (sparc_encode_sparclet_cpreg): Likewise.
711 (sparc_decode_asi): Change return type to be const.
712 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
713 (sparc_decode_sparclet_cpreg): Likewise.
715 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
717 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
718 Solaris doesn't like the combined options, and the -f is
720 (stamp-tshlink, install): Likewise.
722 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
724 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
727 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
729 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
731 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
733 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
736 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
738 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
741 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
743 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
745 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
747 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
750 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
752 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
753 floatformat_to_double to make portable.
754 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
757 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
759 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
760 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
762 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
764 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
765 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
768 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
770 * tic80-opc.c (LSI_SCALED): Renamed from this ...
771 (OFF_SL_BR_SCALED): ... to this, and added the flag
772 TIC80_OPERAND_BASEREL to the flags word.
773 (tic80_opcodes): Replace all occurances of LSI_SCALED with
777 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
779 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
780 Change mips_opcodes from const array to a pointer,
781 and change bfd_mips_num_opcodes from const int to int,
782 so that we can increase the size of the mips opcodes table
786 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
788 * tic80-opc.c (tic80_predefined_symbols): Revert change to
789 store BITNUM values in the table in one's complement form
790 to match behavior when assembler is given a raw numeric
791 value for a BITNUM operand.
792 * tic80-dis.c (print_operand_bitnum): Ditto.
796 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
798 * d30v-opc.c: Removed references to FLAG_X.
801 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
803 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
806 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
808 * Makefile.in: Added d30v object files.
809 * configure: (bfd_d30v_arch) Rebuilt.
810 * configure.in: (bfd_d30v_arch) Added new case.
811 * d30v-dis.c: New file.
812 * d30v-opc.c: New file.
813 * disassemble.c (disassembler) Add entry for d30v.
817 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
819 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
820 representations for the floating point BITNUM values.
822 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
824 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
825 in the table in one's complement form, as they appear in the
827 (tic80_symbol_to_value): Use macros to access predefined
829 (tic80_value_to_symbol): Ditto.
830 (tic80_next_predefined_symbol): New function.
831 * tic80-dis.c (print_operand_bitnum): Remove code that did
832 one's complement for BITNUM values.
836 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
838 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
841 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
843 * makefile.vms: Remove 8 bit characters. Update to latest
846 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
848 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
850 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
852 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
853 (IMM24_PCREL): Likewise.
855 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
857 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
858 address for an extended PC relative instruction that is not a
861 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
863 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
867 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
869 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
870 (tic80_opcodes): Sort entries so that long immediate forms
871 come after short immediate forms, making it easier for
872 assembler to select the right one for a given operand.
875 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
877 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
879 (print_insn_mips16): Likewise.
882 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
884 * mips-opc.c: add r5900.
888 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
890 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
891 a symbol class that restricts translation to just that
892 class (general register, condition code, etc).
894 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
896 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
897 and REG_DEST_E for register operands that have to be
898 an even numbered register. Add REG_FPA for operands that
899 are one of the floating point accumulator registers.
900 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
901 (tic80_opcodes): Change entries that need even numbered
902 register operands to use the new operand table entries.
903 Add "or" entries that are identical to "or.tt" entries.
906 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
908 * mips16-opc.c: Add new cases of exit instruction for
910 * mips-dis.c (print_mips16_insn_arg): Display floating point
911 registers in operands of exit instruction. Print `$' before
912 register names in operands of entry and exit instructions.
915 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
917 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
918 pairs for all predefined symbols recognized by the assembler.
919 Also used by the disassembling routines.
920 (tic80_symbol_to_value): New function.
921 (tic80_value_to_symbol): New function.
922 * tic80-dis.c (print_operand_control_register,
923 print_operand_condition_code, print_operand_bitnum):
924 Remove private tables and use tic80_value_to_symbol function.
927 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
929 * d10v-dis.c (print_operand): Change address printing
930 to correctly handle PC wrapping. Fixes PR11490.
932 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
934 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
937 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
939 * mips-dis.c (print_insn_mips16): Set insn_info information.
940 (print_mips16_insn_arg): Likewise.
942 * mips-dis.c (print_insn_mips16): Better handling of an extend
943 opcode followed by an instruction which can not be extended.
945 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
947 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
948 coldfire moveb instruction to not allow an address register as
949 destination. Although the documentation does not indicate that
950 this is invalid, experiments uncovered unexpected behavior.
951 Added a comment explaining the situation. Thanks to Andreas
952 Schwab for pointing this out to me.
955 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
957 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
958 entries are presorted so that entries with the same mnemonic are
959 adjacent to each other in the table. Sort the entries for each
960 instruction so that this is true.
963 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
965 * m68k-dis.c: Include <libiberty.h>.
966 (print_insn_m68k): Sort the opcode table on the most significant
967 nibble of the opcode.
970 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
972 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
973 "vsub", "vst", "xnor", and "xor" instructions.
974 (V_a1): Renamed from V_a, msb of accumulator reg number.
975 (V_a0): Add macro, lsb of accumulator reg number.
977 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
979 * tic80-dis.c (print_insn_tic80): Broke excessively long
980 function up into several smaller ones and arranged for
981 the instruction printing function to be callable recursively
982 to print vector instructions that have both a load and a
983 math instruction packed into a single opcode.
984 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
985 to explain why it comes after the other vector opcodes.
988 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
990 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
991 move insns to handle immediate operands.
993 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
995 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
996 fix operand mask in the "moveml" entries for the coldfire.
999 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1001 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1002 New macros for building vector instruction opcodes.
1003 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1004 FMT_LI, which were unused. The field is now a flags field.
1005 Remove some opcodes that are possible, but illegal, such
1006 as long immediate instructions with doubles for immediate
1007 values. Add "vadd" and "vld" instructions.
1009 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1011 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1012 the order more logical. Move the shift alias instructions ("rotl",
1013 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1014 interspersed with the regular sr.x and sl.x instructions. Add
1015 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1016 "sub", "subu", "swcr", and "trap".
1018 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1020 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1021 (OFF_SL_PC): Renamed from OFF_SL.
1022 (OFF_SS_BR): New operand type for base relative operand.
1023 (OFF_SL_BR): New operand type for base relative operand.
1024 (REG_BASE): New operand type for base register operand.
1025 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1026 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1027 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1029 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1030 10 char field, padded with spaces on rhs, rather than a string
1031 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1032 than old TIC80_OPERAND_RELATIVE. Add support for new
1033 TIC80_OPERAND_BASEREL flag bit.
1035 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1037 * tic80-dis.c (print_insn_tic80): Print floating point operands
1039 * tic80-opc.c (SPFI): Add single precision floating point
1040 immediate operand type.
1041 (ROTATE): Add rotate operand type for shifts.
1042 (ENDMASK): Add for shifts.
1043 (n): Macro for the 'n' bit.
1044 (i): Macro for the 'i' bit.
1045 (PD): Macro for the 'PD' field.
1046 (P2): Macro for the 'P2' field.
1047 (P1): Macro for the 'P1' field.
1048 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1052 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1054 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1055 adding in current address for pc-relative operands.
1057 start-sanitize-tic80
1058 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1060 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1061 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1062 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1063 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1064 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1065 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1066 (REG_SCALED, LSI_SCALED): New operand types.
1067 (E): New macro for 'E' bit at bit 27.
1068 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1069 opcodes, including the various size flavors (b,h,w,d) for
1070 the direct load and store instructions.
1072 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1074 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1076 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1077 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1078 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1079 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1080 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1081 masks with "MASK_* & ~M_*" to get the M bit reset.
1082 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1084 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1086 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1087 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1088 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1090 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1091 CC, SICR, and LICR table entries.
1092 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1093 "bcnd", and "brcr" opcodes.
1096 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1098 * ppc-opc.c (powerpc_operands): Make comment match the
1099 actual fields (no shift field).
1100 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1101 start-sanitize-tic80
1102 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1103 partial implementation, work in progress.
1104 * tic80-opc.c (tic80_operands): Begin construction operands table.
1105 (tic80_opcodes): Continue populating opcodes table and start
1106 filling in the operand indices.
1107 (tic80_num_opcodes): Add this.
1110 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1112 * m68k-opc.c: Add #B case for moveq.
1114 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1116 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1117 before they are used.
1119 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1121 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1122 for "breakpoint" instruction.
1124 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1126 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1127 (dep): Use ALL_CFLAGS rather than CFLAGS.
1129 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1131 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1134 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1136 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1137 start-sanitize-tic80
1138 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1141 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1143 * mips16-opc.c: Add "abs".
1145 start-sanitize-tic80
1146 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1148 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1149 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1150 (disassembler): Add bfd_arch_tic80 support to set disassemble
1151 to print_insn_tic80.
1152 * tic80-dis.c (print_insn_tic80): Add stub.
1154 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1156 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1157 * configure: Regenerate with autoconf.
1158 * tic80-dis.c: Add file.
1159 * tic80-opc.c: Add file.
1162 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1164 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1166 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1168 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1169 (mn10200_opcodes): Use it for some logicals and btst insns.
1170 Add "break" and "trap" instructions.
1172 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1174 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1176 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1178 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1179 relative load or add now depends upon whether the instruction is
1182 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1184 * mn10200-dis.c: Finish writing disassembler.
1185 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1186 Fix mask for "jmp (an)".
1188 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1189 handle endianness issues for mn10300.
1191 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1193 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1195 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1196 instruction. Fix opcode field for "movb (imm24),dn".
1198 * mn10200-opc.c (mn10200_operands): Fix insertion position
1201 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1203 * mn10200-opc.c: Create mn10200 opcode table.
1204 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1205 but moving along nicely.
1207 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1209 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1211 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1213 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1214 specifiers for fmovem* instructions.
1216 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1218 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1220 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1222 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1225 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1227 * mn10300-opc.c: Add some comments explaining the various
1230 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1232 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1234 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1237 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1238 operand specifiers in fmovm* instructions.
1240 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1242 * ppc-opc.c (insert_li): Give an error if the offset has the two
1243 least significant bits set.
1245 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1247 * mips-dis.c (print_insn_mips16): Separate the instruction from
1248 the arguments with a tab, not a space.
1250 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1252 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1255 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1258 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1260 * configure: Rebuild with autoconf 2.12.
1262 Add support for mips16 (16 bit MIPS implementation):
1263 * mips16-opc.c: New file.
1264 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1265 (mips16_reg_names): New static array.
1266 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1267 after seeing a 16 bit symbol.
1268 (print_insn_little_mips): Likewise.
1269 (print_insn_mips16): New static function.
1270 (print_mips16_insn_arg): New static function.
1271 * mips-opc.c: Add jalx instruction.
1272 * Makefile.in (mips16-opc.o): New target.
1273 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1274 * configure: Rebuild.
1276 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1278 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1279 operand specifiers in *save, *restore and movem* instructions.
1281 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1284 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1285 register operands for immediate arithmetic, not, neg, negx, and
1286 set according to condition instructions.
1288 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1289 specifier of the effective-address operand in immediate forms of
1290 arithmetic instructions. The specifier for the immediate operand
1291 notes how and where the constant will be stored.
1293 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1295 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1298 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1301 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1303 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1305 * mn10300-dis.c (disassemble): Handle register lists.
1307 * mn10300-opc.c: Fix handling of register list operand for
1308 "call", "ret", and "rets" instructions.
1310 * mn10300-dis.c (disassemble): Print PC-relative and memory
1311 addresses symbolically if possible.
1312 * mn10300-opc.c: Distinguish between absolute memory addresses,
1313 pc-relative offsets & random immediates.
1315 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1317 (disassemble): Handle SPLIT and EXTENDED operands.
1319 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1321 * mn10300-dis.c: Rough cut at printing some operands.
1323 * mn10300-dis.c: Start working on disassembler support.
1324 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1326 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1328 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1330 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1332 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1334 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1336 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1337 register argument is calls and jmp instructions.
1339 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1341 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1342 getx operand. Fix opcode for mulqu imm,dn.
1344 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1346 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1347 in MN10300_OPERAND_SPLIT operands for how many bits
1348 appear in the basic insn word. Add IMM32_HIGH24,
1349 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1350 (mn10300_opcodes): Use new operands as needed.
1352 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1353 for bset, bclr, btst instructions.
1354 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1356 * mn10300-opc.c (mn10300_operands): Remove many redundant
1357 operands. Update opcode table as appropriate.
1358 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1359 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1361 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1363 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1364 operands (for indexed load/stores). Fix bitpos for DI
1365 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1366 few instructions that insert immediates/displacements in the
1367 middle of the instruction. Add IMM8E for 8 bit immediate in
1368 the extended part of an instruction.
1369 (mn10300_operands): Use new opcodes as appropriate.
1371 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1373 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1374 sequential so the assembler never parallelizes it with
1377 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1379 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1380 a data/address register that appears in register field 0
1381 and register field 1.
1382 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1384 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1386 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1387 standard disassembly.
1389 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1390 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1391 Recategorize PALcode instructions.
1393 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1395 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1397 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1399 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1400 there are no operand types.
1402 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1404 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1406 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1408 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1410 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1412 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1414 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1415 and sst.w instructions.
1417 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1420 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1422 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1425 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1427 * ppc-opc.c (PPCPWR2): Define.
1428 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1431 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1433 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1434 field for movhu instruction.
1436 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1437 cast value to "long" not "signed long" to keep hpux10
1440 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1442 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1445 * mn10300-opc.c (FMT*): Remove definitions.
1447 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1448 for shift-by-register opcodes.
1450 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1451 into [AD][MN][01] for encoding the position of the register
1454 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1456 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1457 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1459 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1461 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1462 Fix various typos. Add "PAREN" operand.
1463 (MEM, MEM2): Define.
1464 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1465 operands. Fix several typos.
1467 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1470 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1472 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1473 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1475 (mn10300_opcodes): Break opcode format out into its own field.
1476 Update many operand fields to deal with signed vs unsigned
1477 issues. Fix one or two typos in the "mov" instruction
1478 opcode, mask and/or operand fields.
1480 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1482 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1483 m68851 wasn't reset.
1485 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1487 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1488 all opcodes. Very rough cut at operands for all opcodes.
1490 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1493 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1495 * mn10200-opc.c, mn10300-opc.c: New files.
1496 * mn10200-dis.c, mn10300-dis.c: New files.
1497 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1498 * disassemble.c: Break mn10x00 support into 10200 and 10300
1500 * configure.in: Likewise.
1501 * configure: Rebuilt.
1503 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1505 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1507 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1509 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1511 * disassemble (ARCH_mn10x00): Define.
1512 (disassembler): Handle bfd_arch_mn10x00.
1513 * configure.in: Recognize bfd_mn10x00_arch.
1514 * configure: Rebuilt.
1516 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1518 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1519 accordingly. Don't declare functions using op_rtn.
1521 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1523 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1524 params to be more standard.
1525 * (disassemble): Print absolute addresses and symbolic names for
1526 branch and jump targets.
1527 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1529 * (v850_opcodes): Add breakpoint insn.
1531 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1533 * m68k-opc.c: Move the fmovemx data register cases before the
1534 other cases, so that they get recognized before the data register
1535 does gets treated as a degenerate register list.
1537 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1539 * mips-opc.c: Add a case for "div" and "divu" with two registers
1540 and a destination of $0.
1542 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1544 * mips-dis.c (print_insn_arg): Add prototype.
1545 (_print_insn_mips): Ditto.
1547 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1549 * mips-dis.c (print_insn_arg): Print condition code registers as
1552 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1554 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1556 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1558 * v850-dis.c (disassemble): Make static. Provide prototype.
1560 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1562 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1565 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1567 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1568 ']' characters into the output stream.
1569 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1570 Add "memop" field to all opcodes (for the disassembler).
1571 Reorder opcodes so that "nop" comes before "mov" and "jr"
1572 comes before "jarl".
1574 * v850-dis.c (print_insn_v850): Fix typo in last change.
1576 * v850-dis.c (print_insn_v850): Properly handle disassembling
1577 a two byte insn at the end of a memory region when the memory
1578 region's size is only two byte aligned.
1580 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1582 * v850-dis.c (v850_reg_names): Define.
1583 (v850_sreg_names, v850_cc_names): Likewise.
1584 (disassemble): Very rough cut at printing operands (unformatted).
1586 * v850-opc.c (BOP_MASK): Fix.
1587 (v850_opcodes): Fix mask for jarl and jr.
1589 * v850-dis.c: New file. Skeleton for disassembler support.
1590 * Makefile.in Remove v850 references, they're not needed here.
1591 * configure.in: Add v850-dis.o when building v850 toolchains.
1592 * configure: Rebuilt.
1593 * disassemble.c (disassembler): Call v850 disassembler.
1595 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1596 (insert_d8_6, extract_d8_6): New functions.
1597 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1598 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1600 (IF4A, IF4B): Use "D7" instead of "D7S".
1601 (IF4C, IF4D): Use "D8_7" instead of "D8".
1602 (IF4E, IF4F): New. Use "D8_6".
1603 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1604 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1606 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1607 (v850_operands): Change D16 to D16_15, use special insert/extract
1608 routines. New new D16 that uses the generic insert/extract code.
1609 (IF7A, IF7B): Use D16_15.
1610 (IF7C, IF7D): New. Use D16.
1611 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1613 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1614 message. Issue an error if the branch offset is odd.
1616 * v850-opc.c: Add notes about needing special insert/extract
1617 for all the load/store insns, except "ld.b" and "st.b".
1619 * v850-opc.c (insert_d22, extract_d22): New functions.
1620 (v850_operands): Use insert_d22 and extract_d22 for
1622 (insert_d9): Fix range check.
1624 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1626 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1627 and set bits field to D9 and D22 operands.
1629 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1631 * v850-opc.c (v850_operands): Define SR2 operand.
1632 (v850_opcodes): "ldsr" uses R1,SR2.
1634 * v850-opc.c (v850_opcodes): Fix opcode specs for
1635 sld.w, sst.b, sst.h, sst.w, and nop.
1637 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1639 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1640 end of the opcode table.
1642 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1644 * d10v-opc.c (pre_defined_registers): Added register pairs,
1645 "r0-r1", "r2-r3", etc.
1647 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1649 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1650 Create I16U for an unsigned 16bit mmediate operand.
1651 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1653 * v850-opc.c (v850_operands): Define EP operand.
1654 (IF4A, IF4B, IF4C, IF4D): Use EP.
1656 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1657 with immediate operand, "movhi". Tweak "ldsr".
1659 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1660 correct. Get sld.[bhw] and sst.[bhw] closer.
1662 * v850-opc.c (v850_operands): "not" is a two byte insn
1664 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1666 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1668 * v850-opc.c (two): Get order of words correct.
1670 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1672 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1673 register source and destination operands.
1674 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1676 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1677 same thinko in "trap" opcode.
1679 * v850-opc.c (v850_opcodes): Add initializer for size field
1682 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1683 Add D8 for 8-bit unsigned field in short load/store insns.
1684 (IF4A, IF4D): These both need two registers.
1685 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1686 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1687 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1688 for "ldsr" and "stsr".
1689 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1692 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1693 short store word (sst.w).
1695 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1697 * v850-opc.c (v850_operands): Added insert and extract fields,
1698 pointers to functions that handle unusual operand encodings.
1700 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1702 * v850-opc.c (v850_opcodes): Enable "trap".
1704 * v850-opc.c (v850_opcodes): Fix order of displacement
1705 and register for "set1", "clr1", "not1", and "tst1".
1707 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1709 * v850-opc.c (v850_operands): Add "B3" support.
1710 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1713 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1715 * v850-opc.c: Close unterminated comment.
1717 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1719 * v850-opc.c (v850_operands): Add flags field.
1720 (v850_opcodes): add move opcodes.
1722 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1724 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1725 * configure: (bfd_v850v_arch) Add new case.
1726 * configure.in: (bfd_v850_arch) Add new case.
1727 * v850-opc.c: New file.
1729 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1731 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1733 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1735 * d10v-opc.c: Add additional information to the opcode
1736 table to help determinine which instructions can be done
1739 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1741 * mpw-make.sed: Update editing of include pathnames to be
1744 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1746 * arm-opc.h: Added "bx" instruction definition.
1748 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1750 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1752 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1754 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1756 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1758 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1760 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1762 * makefile.vms: Update for alpha-opc changes.
1764 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1766 * i386-dis.c (print_insn_i386): Actually return the correct value.
1767 (ONE, OP_ONE): #ifdef out; not used.
1769 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1771 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1772 Changed subi operand type to treat 0 as 16.
1774 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1776 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1779 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1781 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1782 memory transfer instructions. Add new format string entries %h and %s.
1783 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1786 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1788 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1789 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1791 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1793 * alpha-dis.c (print_insn_alpha_osf): Remove.
1794 (print_insn_alpha_vms): Remove.
1795 (print_insn_alpha): Make globally visible. Chose the register
1796 names based on info->flavour.
1797 * disassemble.c: Always return print_insn_alpha for the alpha.
1799 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1801 * d10v-dis.c (dis_long): Handle unknown opcodes.
1803 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1805 * d10v-opc.c: Changes to support signed and unsigned numbers.
1806 All instructions with the same name that have long and short forms
1807 now end in ".l" or ".s". Divs added.
1808 * d10v-dis.c: Changes to support signed and unsigned numbers.
1810 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1812 * d10v-dis.c: Change all functions to use info->print_address_func.
1814 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1816 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1817 move ccr/sr insns more strict so that the disassembler only
1818 selects them when the addressing mode is data register.
1820 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1821 * d10v-opc.c (pre_defined_registers): Declare.
1822 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1823 to pick a better name for the registers.
1825 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1827 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1828 operands for fexpand and fpmerge. From Christian Kuehnke
1829 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1831 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1833 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1834 print routine. Take new regnames and cpumask arguments.
1835 Kill the environment variable nonsense.
1836 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1837 (print_insn_alpha_vms): New function. Do VMS style regnames.
1838 * disassemble.c (disassembler): Test bfd flavour to pick
1839 between OSF and VMS routines. Default to OSF.
1841 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1843 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1844 * configure: Rebuild.
1845 * Makefile.in (install): Use @INSTALL_SHLIB@.
1847 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1849 * configure: (bfd_d10v_arch) Add new case.
1850 * configure.in: (bfd_d10v_arch) Add new case.
1851 * d10v-dis.c: New file.
1852 * d10v-opc.c: New file.
1853 * disassemble.c (disassembler) Add entry for d10v.
1855 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1857 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1858 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1860 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1862 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1863 distinguish between variants of the instruction set.
1864 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1865 distinguish between variants of the instruction set.
1867 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1869 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1870 the 8086 instruction set.
1871 * i386-dis.c: General cleanups. Make most things static. Add
1872 prototypes. Get rid of static variables aflags and dflags. Pass
1873 them as args (to almost everything).
1875 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1877 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1879 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1881 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1882 if the next arg is marked with SRC_IN_DST. Gross.
1884 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1885 we're looking for and find EXR.
1887 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1888 if we're looking for KBIT and we don't find it.
1890 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1893 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1894 3bit immediate operands.
1896 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1898 * Released binutils 2.7.
1900 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1901 <kkaempf@progis.ac-net.de>.
1903 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1905 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1907 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1909 * sparc-dis.c (print_insn_sparclite): New routine to print
1910 sparclite instructions.
1912 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1914 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1916 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1918 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1919 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1920 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1922 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1924 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1925 Use autoconf-set values.
1926 (docdir, oldincludedir): Removed.
1927 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1929 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1931 * alpha-opc.c: New file.
1932 * alpha-opc.h: Remove.
1933 * alpha-dis.c: Complete rewrite to use new opcode table.
1934 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1935 * configure: Rebuild with autoconf 2.10.
1936 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1937 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1939 (alpha-opc.o): New target.
1941 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1943 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1944 Set imm_added_to_rs1 even if the source and destination register
1947 * sparc-opc.c: Add some two operand forms of the wr instruction.
1949 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1951 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1954 * disassemble.c (disassembler): Handle H8/S.
1955 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1957 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1959 * sparc-opc.c: Add beq/teq as aliases for be/te.
1961 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1962 <sergei@msil.sps.mot.com>.
1964 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1966 * makefile.vms: New file.
1968 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1970 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1972 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1975 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1977 * i386-dis.c (OP_OFF): Call append_prefix.
1979 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1981 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1982 unsigned long to silence a warning from the Solaris PowerPC
1985 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1987 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1989 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1991 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1993 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1994 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1995 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1996 cpush, cpusha, cpull sparclet insns.
1998 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2000 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2002 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2004 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2005 Set F_FLOAT on other floating point instructions.
2007 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2009 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2011 (powerpc_opcodes): Add 860/821 specific SPRs.
2013 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2015 * configure.in: Permit --enable-shared to specify a list of
2016 directories. Set and substitute BFD_PICLIST.
2017 * configure: Rebuild.
2018 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2019 uses. Set to @BFD_PICLIST@.
2021 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2023 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2024 not "abs", which may be needed for the absolute in something
2025 like btst #0,@10:8. Print L_3 immediates separately from other
2026 immediates. Change ABSMOV reference to ABS8MEM.
2028 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2030 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2031 (current_arch_mask): New static global.
2032 (compute_arch_mask): New static function.
2033 (print_insn_sparc): Delete sparc_v9_p. New static local
2034 current_mach. Resort opcode table if current_mach changes.
2035 Generalize "insn not supported" test.
2036 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2037 Delete test for v9/!v9.
2038 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2040 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2041 (brfcx): Renamed to FBRX.
2042 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2043 coprocessor mnemonics are not supported on the sparclet).
2044 (condf): Renamed to CONDF.
2045 (SLCBCC2): Delete F_ALIAS flag.
2047 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2049 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2050 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2052 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2054 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2055 that the shared library version number is set correctly.
2057 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2059 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2060 Miles Bader <miles@gnu.ai.mit.edu>.
2061 * configure: Rebuild.
2063 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2065 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2068 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2070 * configure: Rebuild with autoconf 2.8.
2072 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2074 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2075 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2077 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2079 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2080 since they appear as targets in Makefile.in.
2081 * configure: Rebuild.
2083 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2085 * mpw-make.sed: Edit out shared library support bits.
2087 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2089 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2090 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2091 (sparc_opcodes): Add sparclet insns.
2092 (sparclet_cpreg_table): New static local.
2093 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2094 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2096 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2098 * i386-dis.c (index16): New static variable.
2099 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2101 (OP_indirE): Return result of OP_E.
2102 (OP_E): Check for 16 bit addressing mode, and disassemble
2103 correctly. Optimised 32 bit case a little. Don't print
2104 "(base,index,scale)" when sib specifies only an offset.
2106 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2108 * configure.in: Set and substitute SHLIB_DEP.
2109 * configure: Rebuild.
2110 * Makefile.in (SHLIB_DEP): New variable.
2111 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2112 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2113 COMMON_SHLIB, add them to piclist with appropriate modifications.
2114 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2115 here: just use piclist.
2117 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2119 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2120 (print_insn_sparc): Rewrite v9/not-v9 tests.
2121 (compare_opcodes): Likewise.
2122 * sparc-opc.c (MASK_<ARCH>): Define.
2123 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2124 (sparclet,v6notv9): Define.
2125 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2126 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2128 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2130 * configure.in: Call AC_PROG_CC before configure.host.
2131 * configure: Rebuild.
2133 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2135 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2137 * i386-dis.c (onebyte_has_modrm): New static array.
2138 (twobyte_has_modrm): New static array.
2139 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2141 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2143 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2146 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2148 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2151 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2153 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2154 m68010up, not just m68020up | cpu32.
2156 * Makefile.in (SONAME): New variable.
2157 ($(SHLINK)): Make a link to the transformed name, as well.
2158 (stamp-tshlink): New target.
2159 (install): Skip stamp-tshlink during install.
2161 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2163 * configure.in: Call AC_ARG_PROGRAM.
2164 * configure: Rebuild.
2165 * Makefile.in (program_transform_name): New variable.
2166 (install): Transform library name before installing it.
2168 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2170 * i960-dis.c (mem): Add HX dcinva instruction.
2172 Support for building as a shared library, based on patches from
2173 Alan Modra <alan@spri.levels.unisa.edu.au>:
2174 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2175 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2176 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2177 * configure: Rebuild.
2178 * Makefile.in (ALLLIBS): New variable.
2179 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2180 (COMMON_SHLIB, SHLINK): New variables.
2181 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2182 (STAGESTUFF): Remove variable.
2183 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2184 (stamp-piclist, piclist): New targets.
2185 ($(SHLIB), $(SHLINK)): New targets.
2186 ($(OFILES)): Depend upon stamp-picdir.
2187 (disassemble.o): Build twice if PICFLAG is set.
2188 (MOSTLYCLEAN): Add pic/*.o.
2189 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2190 (distclean): Remove pic and stamp-picdir.
2191 (install): Install shared libraries.
2192 (stamp-picdir): New target.
2194 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2196 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2197 Print unknown instruction as "unknown", rather than in hex.
2199 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2201 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2203 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2205 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2207 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2209 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2210 when necessary. From Ulrich Drepper
2211 <drepper@myware.rz.uni-karlsruhe.de>.
2213 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2215 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2216 sparc_num_opcodes. Update architecture enum values.
2217 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2218 (sparc_opcode_lookup_arch): New function.
2219 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2220 (sparc_opcodes): Add v9a shutdown insn.
2222 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2224 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2225 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2227 (print_insn_sparc64): Deleted.
2228 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2231 * sparc-opc.c (architecture_pname): Add v9a.
2233 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2235 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2236 incorrectly defined as 0x16 when it should be 0x15.
2237 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2238 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2239 excb (exception barrier) which is defined in the Alpha
2240 Architecture Handbook version 2.
2241 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2242 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2243 disassembled as or, for example.
2245 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2247 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2248 (_print_insn_mips): Change i from int to unsigned int.
2250 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2252 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2253 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2255 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2257 * i386-dis.c: Added Pentium Pro instructions.
2259 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2261 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2264 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2266 * sh-opc.h (sh_nibble_type): Added REG_B.
2267 (sh_arg_type): Added A_REG_B.
2268 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2270 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2272 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2274 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2276 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2278 * Makefile.in (distclean): Remove stamp-h. From Ronald
2279 F. Guilmette <rfg@monkeys.com>.
2281 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2283 From David Mosberger-Tang <davidm@azstarnet.com>:
2284 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2287 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2289 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2290 (sh_table): Added many SH3 opcodes.
2291 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2293 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2295 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2296 (subco,subco.): Mark this PPC, not PPCCOM.
2298 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2300 * configure: Rebuild with autoconf 2.7.
2302 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2304 * configure: Rebuild with autoconf 2.6.
2306 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2308 * configure.in: Sort list of architectures. Accept but do nothing
2309 for alliant, convex, pyramid, romp, and tahoe.
2311 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2313 * a29k-dis.c (print_special): Change num to unsigned int.
2315 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2317 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2320 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2322 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2323 * configure: Rebuilt.
2325 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2327 * configure.in: Add case for bfd_i860_arch.
2328 * configure: Rebuild.
2330 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2332 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2333 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2334 (NEXTDOUBLE): Likewise.
2335 (print_insn_m68k): Don't match fmoveml if there is more than one
2336 register in the list.
2337 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2339 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2341 * m68k-opc.c: Use #W rather than #w.
2342 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2344 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2346 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2347 and likewise for all the dbxx opcodes.
2349 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2351 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2353 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2355 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2356 the VR4100 specific instructions to the mips_opcodes structure.
2358 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2360 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2361 ugly Metrowerks bug in CW6, is fixed in CW7.
2363 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2365 * ppc-opc.c (whole file): Add flags for common/any support.
2367 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2369 * Makefile.in (BISON): Remove macro.
2370 (FLAGS_TO_PASS): Remove BISON.
2372 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2374 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2376 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2377 instructions that take no args by looking at the match mask.
2378 (print_insn_arg): Always print "%" before register names.
2379 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2380 [case '_']: Don't print "@#" before address.
2381 [case 'J']: Use "%s" as format string, not register name.
2382 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2384 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2386 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2389 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2391 From David Mosberger-Tang <davidm@azstarnet.com>
2393 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2394 (alpha_insn_set): added definitions for VAX floating point
2395 instructions (Unix compilers don't generate these, but handcoded
2396 assembly might still use them).
2398 * alpha-dis.c (print_insn_alpha): added support for disassembling
2399 the miscellaneous instructions in the Alpha instruction set.
2401 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2403 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2404 no longer create sysdep.h, sed ppc-opc.c to work around a
2405 serious Metrowerks C bug.
2406 * mpw-make.in: Remove.
2407 * mpw-make.sed: New file, used by mpw-configure to edit
2408 Makefile.in into an MPW makefile.
2410 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2412 * Makefile.in (maintainer-clean): New synonym for realclean.
2414 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2416 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2417 which use '0', '1', and '2' instead. Specify the proper size for
2418 a pmove immediate operand. Correct the pmovefd patterns to be
2419 moves to a register, not from a register.
2420 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2422 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2424 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2425 %psr, %wim, %tbr as F_NOTV9.
2427 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2429 * Makefile.in (Makefile): Just rebuild Makefile when running
2431 (config.h, stamp-h): New targets.
2432 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2433 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2434 rebuilding config.h.
2435 * configure: Rebuild.
2437 * mips-opc.c: Change unaligned loads and stores with "t,A"
2438 operands to use "t,A(b)".
2440 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2442 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2444 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2446 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2447 until 3 instead of until 2.
2449 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2451 * Makefile.in (ALL_CFLAGS): Define.
2452 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2453 (MOSTLYCLEAN): Add config.log.
2454 (distclean): Don't remove config.log.
2455 * configure.in: Substitute HDEFINES.
2456 * configure: Rebuild.
2458 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2460 * sh-opc.h (sh_arg_type): Add F_FR0.
2461 (sh_table, case fmac): Add F_FR0 as first argument.
2463 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2465 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2467 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2469 * sparc-dis.c: Remove all references to NO_V9.
2471 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2473 * aclocal.m4: Just include ../bfd/aclocal.m4.
2474 * configure: Rebuild.
2476 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2478 * sparc-dis.c (X_DISP19): Define.
2479 (print_insn, case 'G'): Use it.
2480 (print_insn, case 'L'): Sign extend displacement.
2482 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2484 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2485 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2486 host_makefile_frag or frags.
2487 * aclocal.m4: New file.
2488 * configure: Rebuild.
2489 * Makefile.in (INSTALL): Set to @INSTALL@.
2490 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2491 (INSTALL_DATA): Set to @INSTALL_DATA@.
2493 (AR_FLAGS): Set to rc rather than qc.
2494 (CC): Define as @CC@.
2495 (CFLAGS): Set to @CFLAGS@.
2496 (@host_makefile_frag@): Remove.
2497 (config.status): Remove dependency upon @frags@.
2499 * configure.in: ../bfd/config.bfd now just sets shell variables.
2500 Use them rather than looking through target Makefile fragments.
2501 * configure: Rebuild.
2503 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2505 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2507 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2509 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2510 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2513 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2514 (lookup_{name,value}): New functions.
2515 (prefetch_table): New static local.
2516 (sparc_{encode,decode}_prefetch): New functions.
2517 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2519 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2521 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2524 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2526 * sh-dis.c: Correct comment on first line of file.
2528 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2530 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2532 * sparc-opc.c (asi, membar): New static locals.
2533 (sparc_{encode,decode}_{asi,membar}): New functions.
2534 (sparc_opcodes, membar insn): Fix.
2535 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2536 Support decoding of membar masks.
2539 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2541 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2543 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2545 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2546 and likewise for the other branches. Add bhs as an alias for bcc,
2547 and likewise for the size variants. Add dbhs as an alias for
2550 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2552 * sh-opc.h (FP sts instructions): Update to match reality.
2554 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2556 * m68k-dis.c: (fpcr_names): Add % before all register names.
2557 (reg_names): Likewise.
2558 (print_insn_arg): Don't explicitly print % before register names.
2559 Add % before register names in static array names. In case 'r',
2560 print data registers as `@(Dn)', not `Dn@'. When printing a
2561 memory address, don't print @# before it.
2562 (print_indexed): Change base_disp and outer_disp from int to
2563 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2564 syntax. Sign extend 8 byte displacement correctly.
2565 (print_base): Print using MIT syntax. Print zpc when appropriate.
2566 Change parameter disp from int to bfd_vma.
2568 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2571 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2573 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2574 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2575 * sh-opc.h (sh_arg_type): Add new operand types.
2576 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2578 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2580 * Makefile.in (distclean): Remove generated file config.h.
2582 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2584 * Makefile.in (distclean): Remove generated file config.h.
2586 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2588 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2590 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2592 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2593 rather than numopcodes. Use m68k_opcodes rather than removed
2594 opcode function. Don't check F_ALIAS.
2595 (print_insn_arg): Change first parameter to be const char *.
2596 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2597 (m68k-opc.o): New target.
2598 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2599 * configure: Rebuild.
2601 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2603 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2604 (opcode_bits, opcode_hash_table): New variables.
2605 (opcodes_initialized): Renamed from opcodes_sorted.
2606 (build_hash_table): New function.
2607 (is_delayed_branch): Use hash table.
2608 (print_insn): Renamed from print_insn_sparc, made static.
2609 Build and use hash table. If !sparc64, ignore sparc64 insns,
2610 and vice-versa if sparc64.
2611 (print_insn_sparc, print_insn_sparc64): New functions.
2612 (compare_opcodes): Move sparc64 opcodes to end.
2613 Print commutative insns with constant second.
2614 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2616 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2618 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2619 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2620 avoids printing a delay slot in a delay slot.
2621 * sh-opc.h (sh_table): Fully bracket last entry.
2623 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2625 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2627 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2629 * configure.in: Get host_makefile_frag from ${srcdir}.
2631 * configure.in: Autoconfiscated. Check for string[s].h. Create
2632 config.h from config.in. Don't set up sysdep.h link.
2633 * sysdep.h: New file.
2634 * configure, config.in: New files, generated from configure.in.
2635 * Makefile.in: Updated to be processed autoconf-style.
2636 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2637 (Makefile): Depend on config.status.
2638 (config.status): New rule.
2639 * configure.bat: Update Makefile substitutions.
2641 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2643 * mips-opc.c (L1): Define.
2644 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2645 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2648 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2650 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2651 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2652 have multiple add units but only a single logical unit.
2654 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2655 shifted by 18, without any insertion or extraction function.
2656 (insert_cr, extract_cr): Remove.
2658 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2660 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2663 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2665 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2666 * sh-opc.h: Add copyright.
2668 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2670 * Makefile.in (crunch-m68k): Delete extra target accidentally
2671 checked in a while ago.
2673 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2675 * sh-opc.h (sh_table): Add SH3 support.
2677 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2679 * sh-opc.h: Added bsrf and braf.
2681 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2683 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2684 bogus [ls]fm{ea,fd} patterns.
2686 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2687 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2688 initialize it from memory. Make function static.
2689 (print_insn_{big,little}_arm): New functions.
2690 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2691 the correct endianness.
2693 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2695 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2698 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2700 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2701 17th, so that it builds again using GCC as the compiler.
2703 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2705 * mips-dis.c (print_insn_little_mips): Cast return value from
2706 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2707 expects an unsigned long, and that might be fewer words of
2708 argument storage (e.g., if bfd_vma is long long on a 32-bit
2710 (print_insn_big_mips): Likewise with bfd_getb32 value.
2711 (_print_insn_mips): Now static.
2713 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2715 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2716 gcc memory hog problem with initializer is fixed.
2718 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2720 Merge in support for Mac MPW as a host.
2721 (Old change descriptions retained for informational value.)
2723 * mpw-config.in (archname): Compute from the config.
2724 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2726 * mpw-config.in (target_arch): Compute from canonical target.
2727 (m68k, mips, powerpc, sparc): Add architectures.
2728 * mpw-make.in (disassemble.c.o): Add.
2729 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2731 * mpw-config.in (BFD_MACHINES): Set to a default value.
2732 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2734 * mpw-make.in (CSEARCH): Add extra-include to search path.
2736 * mpw-config.in (varargs.h): Don't create.
2737 (sysdep.h): Create using forward-include.
2738 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2740 * mpw-config.in: New file, MPW version of configure.in.
2741 * mpw-make.in: New file, MPW version of Makefile.in.
2743 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2745 * alpha-dis.c (print_insn_alpha): Put empty statement after
2748 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2750 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2751 (low_sign_extend): Likewise.
2752 (get_field): Delete unused function.
2753 (set_field, deposit_14, deposit_21): Likewise.
2755 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2757 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2760 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2762 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2764 * alpha-opc.h (OSF_ASMCODE): define
2765 print pal-code names as defined in App C of the
2766 Alpha Architecture Reference Manual
2768 * alpha-dis.c: cleaned up output
2769 print stylized code forms as defined in App A.4.3 of the
2770 Alpha Architecture Reference Manual
2772 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2774 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2776 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2779 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2781 * m68k-dis.c (opcode): New function. Returns address of opcode
2782 table entry given index, even if the opcode table was split to
2783 work around gcc bugs.
2784 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2786 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2787 (reg_names): Now const.
2788 (print_insn_arg): Arrays cacheFieldName and names now const.
2789 (print_indexed): Array scales now const.
2791 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2793 * ppc-opc.c: Sort recently added instructions by minor opcode
2794 number within major opcode number.
2796 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2798 * hppa-dis.c: Include libhppa.h.
2800 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2802 * mips-opc.c: Change dli to use M_DLI, and add dla.
2804 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2806 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2808 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2810 * mips-opc.c: Add r4650 mul instruction.
2812 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2814 * mips-opc.c: Add uld and usd macros for unaligned double load and
2817 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2819 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2820 mfdcr, mtdcr, icbt, iccci.
2822 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2824 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2825 signed char fields to shorts, more portable.
2827 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2829 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2830 char fields as signed chars, since they may have negative values.
2832 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2834 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2835 (mycroft@netbsd.org).
2837 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2839 From "Logg, Ed" <elogg@ea.com>:
2840 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2841 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2844 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2846 * ppc-opc.c: Changes based on patch from David Edelsohn
2847 <edelsohn@mhpcc.edu>.
2848 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2851 (insert_tbr): New static function.
2852 (extract_tbr): New static function.
2853 (XFXFXM_MASK, XFXM): Define.
2854 (XSPRBAT_MASK, XSPRG_MASK): Define.
2855 (powerpc_opcodes): Add instructions to access special registers by
2856 name. Add mtcr and mftbu.
2858 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2860 * mips-opc.c (P3): Define.
2861 (mips_opcodes): Add mad and madu.
2863 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2865 * configure.in: Add W65 support.
2866 * disassemble.c: Likewise.
2867 * w65-opc.h, w65-dis.c: New files.
2869 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2871 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2874 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2876 * mips-opc.c: Add dli as a synonym for li.
2878 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2880 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2881 print something for reserved opcode values, even if it won't
2884 * mips-dis.c (_print_insn_mips): When initializing, shift right
2885 and mask, to avoid sign extension problems on the Alpha.
2887 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2890 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2892 * sh-opc.h (mov.l gbr): Get direction right.
2893 * sh-dis.c (print_insn_shx): New function.
2894 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2895 print opcodes with right byte order.
2897 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2899 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2900 to avoid conflicts with getopt.
2902 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2904 * hppa-dis.c (print_insn_hppa): Read the instruction using
2905 bfd_getb32, so that it works on a little endian or 64 bit host.
2906 Remove unused local variable op.
2908 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2910 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2911 addu does not work correctly if -mips3.
2913 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2915 * a29k-dis.c (print_special): Add special register names defined
2916 on 29030, 29040 and 29050.
2917 (print_insn): Handle new operand type 'I'.
2919 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2921 * Makefile.in (INSTALL): Use top level install.sh script.
2923 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2925 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2926 that it works on a little endian host.
2928 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2930 * configure.in: Use ${config_shell} when running config.bfd.
2932 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2934 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2936 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2938 * a29k-dis.c (print_insn): Print the opcode.
2940 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2942 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2944 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2946 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2948 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2950 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2951 which store a value into memory.
2953 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2955 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2956 * arm-dis.c, arm-opc.h: New files.
2958 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2960 * Makefile.in (ns32k-dis.o): Add dependency.
2961 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2962 string, not as array of chars.
2964 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2966 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2968 * sparc-opc.c: Added sparclite extended FP operations, and
2969 versions of v9 impdep* instructions permitting specification of
2972 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2974 * i960-dis.c (reg_names): Now const.
2975 (struct sparse_tabent): New type, copied from array type in mem
2977 (ctrl): Local static array ctrl_tab now const.
2978 (cobr): Local static array cobr_tab now const.
2979 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2980 static variable mem_tab no longer explicitly initialized. Changed
2981 mem_init to const array of struct sparse_tabent.
2982 (reg): Local static variable reg_tab no longer explicitly
2983 initialized. Changed reg_init to const array of struct
2985 (ea): Local static array scale_tab now const.
2987 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2990 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2992 * configure.bat: the disassember needs to be enabled for
2993 "objdump -d" to work in djgpp.
2995 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2997 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2998 (invalid_float): Enabled general version, doesn't require running
2999 on ns32k host. Changed to take char* argument, and test for
3000 explicitly specified sizes, instead of using sizeof() on host CPU
3002 (INVALID_FLOAT): Cast first argument.
3003 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3004 list_P032, list_M032): Now const.
3005 (optlist, list_search): Made appropriate arguments now point to
3007 (print_insn_arg): Changed static array of one-character-string
3008 pointers into a static const array of characters; fixed sprintf
3009 statement accordingly.
3011 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3013 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3014 from distribution. A ns32k-dis.c from a previous distribution has
3015 been brought up to date and supports the new interface.
3017 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3019 * configure.in: add bfd_ns32k_arch target support.
3021 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3022 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3024 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3026 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3029 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3031 * h8300-dis.c, mips-dis.c: Don't use true and false.
3033 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3035 * configure.in: Change --with-targets to --enable-targets.
3037 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3039 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3040 opcodes to the first instruction with that opcode, to speed
3041 disassembly of large files. From ralphc@pyramid.com (Ralph
3044 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3046 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3048 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3050 * configure.bat: update to latest makefile.in
3052 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3054 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3055 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3056 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3057 slot insn is in a delay slot.
3058 * z8k-opc.h: (resflg): Fix patterns.
3059 * h8500-opc.h Fix CR insn patterns.
3061 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3063 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3064 "cmpl" before POWER versions, so that gas -many uses them.
3066 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3068 * disassemble.c: New file.
3069 * Makefile.in (OFILES): Add disassemble.o.
3070 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3071 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3072 binutils/configure.in.
3074 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3075 opcode being examined.
3077 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3079 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3080 (insert_ral, insert_ram, insert_ras): New functions.
3081 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3082 RAS for store with update.
3084 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3086 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3087 (edelsohn@npac.syr.edu).
3089 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3091 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3094 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3096 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3098 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3100 * ppc-opc.c (powerpc_operands): The signedp field has been
3101 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3102 instead. Add new operand SISIGNOPT.
3103 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3104 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3105 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3108 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3110 * i386-dis.c (struct private): Renamed to dis_private. `private'
3111 is a reserved word for dynix cc.
3113 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3115 * configure.in: Change error message to refer to bfd/config.bfd
3116 rather than bfd/configure.in.
3118 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3120 * ppc-opc.c: Define POWER2 as short alias flag.
3121 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3124 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3126 * i960-dis.c (print_insn_i960): Don't read a second word for
3127 opcodes 0, 1, 2 and 3.
3129 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3131 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3133 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3135 * m68881-ext.c: Removed; no longer used.
3136 * Makefile.in: Changed accordingly.
3138 * m68k-dis.c (ext_format_68881): Don't declare.
3139 (print_insn_m68k): If an instruction uses place 'i', it uses at
3140 least four fixed bytes.
3141 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3142 extended float, convert to double using floatformat_to_double, not
3143 ieee_extended_to_double, and fetch the data before converting it.
3145 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3147 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3148 davidj@ICSI.Berkeley.EDU (David Johnson).
3150 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3152 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3153 PowerPC uses bdnz[l][a].
3155 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3157 * dis-buf.c, i386-dis.c: Include sysdep.h.
3159 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3161 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3163 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3164 by Motorola PowerPC 601 with PPC_OPCODE_601.
3165 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3166 Disassemble Motorola PowerPC 601 instructions as well as normal
3167 PowerPC instructions.
3169 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3171 * i960-dis.c (reg, mem): Just use a static array instead of
3174 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3176 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3177 condition name index if this is for a negated condition.
3179 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3180 Floating point format for 'H' operand is backwards from normal
3181 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3182 operands (fmpyadd and fmpysub), handle bizarre register
3183 translation correctly for single precision format.
3185 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3186 or 'I' operands if the next format specifier is 'M' (fcmp
3187 condition completer).
3189 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3191 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3192 single number giving a bitmask for the MB and ME fields of an M
3193 form instruction. Change NB to accept 32, and turn it into 0;
3194 also turn 0 into 32 when disassembling. Seperated SH from NB.
3195 (insert_mbe, extract_mbe): New functions.
3196 (insert_nb, extract_nb): New functions.
3197 (SC_MASK): Mask out SA and LK bits.
3198 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3199 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3200 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3201 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3202 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3203 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3204 (powerpc_macros): Define table of macro definitions.
3205 (powerpc_num_macros): Define.
3207 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3208 if PPC_OPERAND_NEXT is set.
3210 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3212 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3213 char. Retrieve contents using bfd_getl32 instead of shifting.
3215 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3217 * ppc-opc.c: New file. Opcode table for PowerPC, including
3218 opcodes for POWER (RS/6000).
3219 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3220 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3221 (CFILES): Add ppc-dis.c.
3222 (ppc-dis.o, ppc-opc.o): New targets.
3223 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3225 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3227 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3228 No space before 'u', 'f', or 'N'.
3230 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3232 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3233 farther than we should.
3235 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3237 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3239 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3241 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3243 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3244 needs it, to prevent reading past the end of a section.
3246 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3248 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3249 Removed t,A case for la; always use t,A(b) case.
3251 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3253 From Ted Lemen <mellon@pepper.ncd.com>
3254 * mips-dis.c (print_insn_arg): Handle 'k'.
3255 * mips-opc.c: Make cache use k, not t.
3257 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3259 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3260 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3261 FLOAT_FORMAT_CODE to put out floating point register names.
3263 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3265 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3267 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3269 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3271 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3273 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3274 larger than 32. Moved dsxx32 variants first for disassembler.
3276 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3278 * z8kgen.c, z8k-opc.h: Add full lda information.
3280 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3282 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3283 movb instructions. Any necessary space will be emitted by
3284 the code to handle nullification completers.
3286 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3288 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3290 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3292 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3293 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3295 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3297 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3299 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3301 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3302 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3304 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3306 * m88k-dis.c (m88kdis): comment change. Remove space after
3308 (printop): handle new arg types DEC and XREG for m88110.
3310 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3312 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3313 type for absolute branch addresses. Delete special
3314 "ble" and "be" code in 'W' operand code.
3316 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3318 * mips-opc.c: Set hazard information correctly for branch
3319 likely instructions.
3321 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3323 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3324 info->fprintf_func for printing and info->print_address_func for
3327 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3329 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3331 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3333 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3334 Corrected second case of "b" for disassembler.
3336 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3338 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3339 to BFD swapping routines to correspond to BFD name changes.
3341 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3343 * mips-opc.c: Change div machine instruction to be z,s,t rather
3344 than s,t. Change div macro to be d,v,t rather than d,s,t.
3345 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3346 rem and remu which generates only the corresponding div
3347 instruction. This is for compatibility with the MIPS assembler,
3348 which only generates the simple machine instruction when an
3349 explicit destination of $0 is used.
3350 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3352 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3354 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3355 WR_31 hazard for bal, bgezal, bltzal.
3357 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3359 * hppa-dis.c (print_insn_hppa): Use print function
3360 from within the disassemble_info, not fprintf_filtered.
3362 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3364 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3365 Law, law@cs.utah.edu.)
3367 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3369 * mips-opc.c ("absu"): Removed.
3372 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3374 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3375 Changed hazard information to distinguish between memory load
3376 delays and coprocessor load delays.
3378 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3380 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3382 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3384 * configure.in: Don't pass cpu to config.bfd.
3386 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3388 * m88k-dis.c (m88kdis): Make class unsigned.
3390 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3392 * alpha-dis.c (print_insn_alpha): One branch format case was
3393 missing the instruction name.
3395 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3397 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3398 Add the arch-specific auxiliary files.
3399 (OFILES): Remove the arch-specific auxiliary files
3400 and use BFD_MACHINES instead of DIS_LIBS.
3401 * configure.in: Set BFD_MACHINES based on --with-targets option.
3403 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3405 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3408 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3410 * sparc-opc.c: Change CONST to const to deal with gcc
3411 -Dconst=__const -traditional.
3413 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3415 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3416 coprocessor instructions out of #if 0, and made them use new
3419 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3421 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3423 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3425 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3426 instruction, for use by the disassembler.
3428 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3429 hand-coded sign extensions that depended on 32-bit host ints.
3430 FIXME, we still depend on big-endian host bitfield ordering.
3431 (sparc_print_insn): Set the insn_info_valid field, and the
3432 other fields that describe the instruction being printed.
3434 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3436 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3437 `jmp' instead of just one of them.
3439 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3441 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3442 (fput_fp_reg_r): Renamed from fput_reg_r.
3443 (fput_fp_reg): New function.
3444 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3446 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3448 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3450 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3452 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3454 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3455 don't output a space.
3457 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3459 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3461 * mips-opc.c: New file, containing opcode table from
3462 ../include/opcode/mips.h.
3463 * Makefile.in: Add it.
3465 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3467 * m88k-dis.c: New file, moved in from gdb and changed to use the
3468 new dis-asm.h disassembler interface.
3469 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3470 (m88k-dis.o): New target.
3472 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3474 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3475 argument string const char * to correspond to opcode/mips.h.
3477 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3479 * mips-dis.c: Updated to account for name changes in new version
3481 * Makefile.in: Added header file dependencies.
3483 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3485 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3487 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3489 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3490 extend, rather than shifts.
3492 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3494 * Makefile.in: Undo 15 June change.
3496 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3498 * m68k-dis.c (print_insn_arg): Change return value to byte count
3500 * m68k-dis.c: Re-write to detect invalid operands before
3501 printing anything, so we can handle this the same way we
3502 handle invalid opcodes.
3504 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3506 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3508 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3510 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3513 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3515 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3517 * configure.in: Do make sysdep.h link.
3518 * Makefile.in: Search ../include. Don't search ../bfd.
3520 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3522 Changes from Jeff Law, law@cs.utah.edu:
3523 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3524 Do not print a space before the completers specified by
3527 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3529 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3530 defined, since gdb has been fixed.
3532 Changes from Jeff Law, law@cs.utah.edu:
3533 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3534 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3535 be a *disassemble_info, not a *FILE.
3536 * hppa-dis.c: Support 'd', '!', and 'a'.
3537 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3538 * hppa-dis.c: Delete cases which are no longer needed.
3540 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3542 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3544 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3546 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3549 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3551 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3552 * configure.in: No longer need to configure to get sysdep.h.
3554 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3556 * Patches from Jeffrey Law <law@cs.utah.edu>.
3557 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3558 templates for 1.1 FP computational instructions.
3560 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3562 * h8500-dis.c (print_insn_h8500): Address argument is type
3564 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3567 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3568 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3570 * sparc-dis.c (compare_opcodes): Move static declaration to
3573 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3575 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3576 instruction, remove unimp hack from 'l' argument.
3578 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3580 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3583 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3585 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3586 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3589 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3591 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3592 arrays of string pointers to 2-d arrays of chars, to save
3595 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3597 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3598 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3600 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3602 * hppa-dis.c: New file from Utah, adapted to new disassembler
3604 * Makefile.in: Include it.
3606 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3608 * sh-dis.c, sh-opc.h: New files.
3610 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3612 * alpha-dis.c, alpha-opc.h: New files.
3614 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3616 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3619 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3621 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3623 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3625 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3628 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3630 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3631 and double percent signs a few places.
3633 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3635 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3636 Use info->print_address_func not print_address.
3638 * dis-buf.c (generic_print_address): New function.
3640 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3642 * Makefile.in: Add sparc-dis.c.
3643 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3645 Add `add' instruction to the set that get checked
3646 for a preceding `sethi' in order to print an absolute address.
3647 * (print_insn): Disassembly prefers real instructions.
3648 (is_delayed_branch): Speed up.
3649 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3650 Still missing some float ops, and needs testing.
3651 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3652 F_ALIAS. Use printf, not fprintf, when not passing a file
3654 (compare_opcodes): Check that identical instructions have
3655 identical opcodes, complain otherwise.
3658 * Include reg_names.
3660 Use dis-asm.h/read_memory_func interface.
3662 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3664 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3665 deliberately return non-zero to setjmp from longjmp. Otherwise
3666 this code fails to compile.
3668 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3670 * m68k-dis.c: Fix prototype for fetch_arg().
3672 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3674 * dis-buf.c: New file, for new read_memory_func interface.
3675 Makefile.in (OFILES): Include it.
3676 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3677 Use new read_memory_func interface.
3679 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3681 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3682 * h8500-opc.h: Fix couple of opcodes.
3684 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3686 * Makefile.in: add dvi & installcheck targets
3688 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3690 * Makefile.in: Update for h8500-dis.c.
3692 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3694 * h8500-dis.c, h8500-opc.h: New files
3696 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3698 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3699 ../include/dis-asm.h.
3700 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3701 and ../gdb/m68k-pinsn.c).
3702 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3703 and ../gdb/i386-pinsn.c).
3704 * m68881-ext.c: New file. Moved definition of
3705 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3706 * Makefile.in: Adjust for new files.
3707 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3708 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3709 can be dis-assembled.
3711 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3713 * mips-dis.c (print_insn_arg): Now returns void.
3715 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3717 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3718 files that use the macros.
3720 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3722 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3723 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3724 (CFILES): Added mips-dis.c.
3726 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3728 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3729 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3731 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3733 * Makefile.in: Improve *clean rules.
3734 * configure.in: Allow a default host.
3736 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3738 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3739 files include other sysdep files
3741 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3743 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3745 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3747 * configure.in: For host support, use ../bfd/configure.host
3748 so it stays in sync with the ../bfd/hosts database.
3750 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3752 * configure.in: use cpu-vendor-os triple instead of nested cases
3754 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3756 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3757 *always* the wrong one.
3759 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3761 * z8kgen.c: added copyright info
3763 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3765 * z8k-dis.c (unparse_instr): prettier tabs
3766 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3768 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3770 * configure.in: Add ncr* configuration.
3771 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3772 picayune ANSI compilers happy.
3774 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3776 * configure.in (i386): Make i386 and i486 synonymous for now.
3777 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3779 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3781 * Makefile.in (install): Fix typo.
3783 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3785 * Makefile.in (make): Remove obsolete crud.
3786 (sparc-opc.o): Avoid Sun Make VPATH bug.
3788 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3790 * Makefile.in: since there are no SUBDIRS, remove rule and
3791 references of subdir_do.
3793 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3795 * Makefile.in (install): Get the library name right here too.
3796 Don't install bfd.h, since it's unrelated to this library. No
3797 subdirs to recurse into, either.
3798 (CFILES): The source file has a .c suffix, not .o.
3800 * sparc-opc.c: New file, moved from BFD.
3801 * Makefile.in (OFILES): Build it.
3803 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3805 * z8k-dis.c: fixed forward refferences of some declarations.
3807 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3809 * Makefile.in: get the name of the library right
3811 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3813 * z8k-dis.c: knows how to disassemble z8k stuff
3814 * z8k-opc.h: new file full of z8000 opcodes
3818 version-control: never