2 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-opc.c (v850_opcodes): Fix opcode specs for
5 sld.w, sst.b, sst.h, sst.w, and nop.
7 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
9 * v850-opc.c (v850_opcodes): Add null opcode to mark the
10 end of the opcode table.
14 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
16 * d10v-opc.c (pre_defined_registers): Added register pairs,
17 "r0-r1", "r2-r3", etc.
21 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
23 * v850-opc.c (v850_operands): Make I16 be a signed operand.
24 Create I16U for an unsigned 16bit mmediate operand.
25 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
27 * v850-opc.c (v850_operands): Define EP operand.
28 (IF4A, IF4B, IF4C, IF4D): Use EP.
30 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
31 with immediate operand, "movhi". Tweak "ldsr".
33 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
34 correct. Get sld.[bhw] and sst.[bhw] closer.
36 * v850-opc.c (v850_operands): "not" is a two byte insn
38 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
40 * v850-opc.c (v850_operands): D16 inserts at offset 16!
42 * v850-opc.c (two): Get order of words correct.
44 * v850-opc.c (v850_operands): I16 inserts at offset 16!
46 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
47 register source and destination operands.
48 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
50 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
51 same thinko in "trap" opcode.
53 * v850-opc.c (v850_opcodes): Add initializer for size field
56 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
57 Add D8 for 8-bit unsigned field in short load/store insns.
58 (IF4A, IF4D): These both need two registers.
59 (IF4C, IF4D): Define. Use 8-bit unsigned field.
60 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
61 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
62 for "ldsr" and "stsr".
63 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
66 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
67 short store word (sst.w).
69 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
71 * v850-opc.c (v850_operands): Added insert and extract fields,
72 pointers to functions that handle unusual operand encodings.
74 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
76 * v850-opc.c (v850_opcodes): Enable "trap".
78 * v850-opc.c (v850_opcodes): Fix order of displacement
79 and register for "set1", "clr1", "not1", and "tst1".
81 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
83 * v850-opc.c (v850_operands): Add "B3" support.
84 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
87 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
89 * v850-opc.c: Close unterminated comment.
91 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
93 * v850-opc.c (v850_operands): Add flags field.
94 (v850_opcodes): add move opcodes.
96 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
98 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
99 * configure: (bfd_v850v_arch) Add new case.
100 * configure.in: (bfd_v850_arch) Add new case.
101 * v850-opc.c: New file.
104 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
106 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
109 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
111 * d10v-opc.c: Add additional information to the opcode
112 table to help determinine which instructions can be done
116 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
118 * mpw-make.sed: Update editing of include pathnames to be
121 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
123 * arm-opc.h: Added "bx" instruction definition.
125 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
127 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
130 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
132 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
134 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
136 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
139 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
141 * makefile.vms: Update for alpha-opc changes.
143 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
145 * i386-dis.c (print_insn_i386): Actually return the correct value.
146 (ONE, OP_ONE): #ifdef out; not used.
149 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
151 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
152 Changed subi operand type to treat 0 as 16.
155 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
157 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
160 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
162 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
163 memory transfer instructions. Add new format string entries %h and %s.
164 * arm-dis.c: (print_insn_arm): Provide decoding of the new
168 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
170 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
171 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
174 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
176 * alpha-dis.c (print_insn_alpha_osf): Remove.
177 (print_insn_alpha_vms): Remove.
178 (print_insn_alpha): Make globally visible. Chose the register
179 names based on info->flavour.
180 * disassemble.c: Always return print_insn_alpha for the alpha.
183 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
185 * d10v-dis.c (dis_long): Handle unknown opcodes.
187 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
189 * d10v-opc.c: Changes to support signed and unsigned numbers.
190 All instructions with the same name that have long and short forms
191 now end in ".l" or ".s". Divs added.
192 * d10v-dis.c: Changes to support signed and unsigned numbers.
194 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
196 * d10v-dis.c: Change all functions to use info->print_address_func.
199 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
201 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
202 move ccr/sr insns more strict so that the disassembler only
203 selects them when the addressing mode is data register.
206 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
207 * d10v-opc.c (pre_defined_registers): Declare.
208 * d10v-dis.c (print_operand): Now uses pre_defined_registers
209 to pick a better name for the registers.
212 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
214 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
215 operands for fexpand and fpmerge. From Christian Kuehnke
216 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
218 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
220 * alpha-dis.c (print_insn_alpha): No longer the user-visible
221 print routine. Take new regnames and cpumask arguments.
222 Kill the environment variable nonsense.
223 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
224 (print_insn_alpha_vms): New function. Do VMS style regnames.
225 * disassemble.c (disassembler): Test bfd flavour to pick
226 between OSF and VMS routines. Default to OSF.
228 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
230 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
231 * configure: Rebuild.
232 * Makefile.in (install): Use @INSTALL_SHLIB@.
235 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
237 * configure: (bfd_d10v_arch) Add new case.
238 * configure.in: (bfd_d10v_arch) Add new case.
239 * d10v-dis.c: New file.
240 * d10v-opc.c: New file.
241 * disassemble.c (disassembler) Add entry for d10v.
244 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
246 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
247 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
249 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
251 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
252 distinguish between variants of the instruction set.
253 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
254 distinguish between variants of the instruction set.
256 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
258 * i386-dis.c (print_insn_i8086): New routine to disassemble using
259 the 8086 instruction set.
260 * i386-dis.c: General cleanups. Make most things static. Add
261 prototypes. Get rid of static variables aflags and dflags. Pass
262 them as args (to almost everything).
264 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
266 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
268 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
270 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
271 if the next arg is marked with SRC_IN_DST. Gross.
273 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
274 we're looking for and find EXR.
276 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
277 if we're looking for KBIT and we don't find it.
279 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
282 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
283 3bit immediate operands.
285 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
287 * Released binutils 2.7.
289 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
290 <kkaempf@progis.ac-net.de>.
292 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
294 * alpha-opc.c: Correct second case of "mov" to use OPRL.
296 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
298 * sparc-dis.c (print_insn_sparclite): New routine to print
299 sparclite instructions.
301 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
303 * m68k-opc.c (m68k_opcodes): Add coldfire support.
305 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
307 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
308 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
309 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
311 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
313 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
314 Use autoconf-set values.
315 (docdir, oldincludedir): Removed.
316 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
318 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
320 * alpha-opc.c: New file.
321 * alpha-opc.h: Remove.
322 * alpha-dis.c: Complete rewrite to use new opcode table.
323 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
324 * configure: Rebuild with autoconf 2.10.
325 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
326 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
328 (alpha-opc.o): New target.
330 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
332 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
333 Set imm_added_to_rs1 even if the source and destination register
336 * sparc-opc.c: Add some two operand forms of the wr instruction.
338 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
340 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
343 * disassemble.c (disassembler): Handle H8/S.
344 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
346 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
348 * sparc-opc.c: Add beq/teq as aliases for be/te.
350 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
351 <sergei@msil.sps.mot.com>.
353 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
355 * makefile.vms: New file.
357 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
359 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
361 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
364 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
366 * i386-dis.c (OP_OFF): Call append_prefix.
368 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
370 * ppc-opc.c (instruction encoding macros): Add explicit casts to
371 unsigned long to silence a warning from the Solaris PowerPC
374 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
376 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
378 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
380 * sparc-dis.c (X_IMM,X_SIMM): New macros.
382 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
383 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
384 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
385 cpush, cpusha, cpull sparclet insns.
387 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
389 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
391 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
393 * sparc-opc.c: Set F_FBR on floating point branch instructions.
394 Set F_FLOAT on other floating point instructions.
396 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
398 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
400 (powerpc_opcodes): Add 860/821 specific SPRs.
402 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
404 * configure.in: Permit --enable-shared to specify a list of
405 directories. Set and substitute BFD_PICLIST.
406 * configure: Rebuild.
407 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
408 uses. Set to @BFD_PICLIST@.
410 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
412 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
413 not "abs", which may be needed for the absolute in something
414 like btst #0,@10:8. Print L_3 immediates separately from other
415 immediates. Change ABSMOV reference to ABS8MEM.
417 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
419 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
420 (current_arch_mask): New static global.
421 (compute_arch_mask): New static function.
422 (print_insn_sparc): Delete sparc_v9_p. New static local
423 current_mach. Resort opcode table if current_mach changes.
424 Generalize "insn not supported" test.
425 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
426 Delete test for v9/!v9.
427 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
429 (brfc): Split into CBR and FBR for coprocessor/fp branches.
430 (brfcx): Renamed to FBRX.
431 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
432 coprocessor mnemonics are not supported on the sparclet).
433 (condf): Renamed to CONDF.
434 (SLCBCC2): Delete F_ALIAS flag.
436 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
438 * sparc-opc.c (sparc_opcodes): rd must be 0 for
439 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
441 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
443 * Makefile.in (config.status): Depend upon BFD VERSION file, so
444 that the shared library version number is set correctly.
446 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
448 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
449 Miles Bader <miles@gnu.ai.mit.edu>.
450 * configure: Rebuild.
452 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
454 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
457 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
459 * configure: Rebuild with autoconf 2.8.
461 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
463 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
464 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
466 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
468 * configure.in: Don't set SHLIB or SHLINK to an empty string,
469 since they appear as targets in Makefile.in.
470 * configure: Rebuild.
472 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
474 * mpw-make.sed: Edit out shared library support bits.
476 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
478 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
479 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
480 (sparc_opcodes): Add sparclet insns.
481 (sparclet_cpreg_table): New static local.
482 (sparc_{encode,decode}_sparclet_cpreg): New functions.
483 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
485 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
487 * i386-dis.c (index16): New static variable.
488 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
490 (OP_indirE): Return result of OP_E.
491 (OP_E): Check for 16 bit addressing mode, and disassemble
492 correctly. Optimised 32 bit case a little. Don't print
493 "(base,index,scale)" when sib specifies only an offset.
495 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
497 * configure.in: Set and substitute SHLIB_DEP.
498 * configure: Rebuild.
499 * Makefile.in (SHLIB_DEP): New variable.
500 (LIBIBERTY_LISTS, BFD_LIST): New variables.
501 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
502 COMMON_SHLIB, add them to piclist with appropriate modifications.
503 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
504 here: just use piclist.
506 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
508 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
509 (print_insn_sparc): Rewrite v9/not-v9 tests.
510 (compare_opcodes): Likewise.
511 * sparc-opc.c (MASK_<ARCH>): Define.
512 (v6,v7,v8,sparclite,v9,v9a): Redefine.
513 (sparclet,v6notv9): Define.
514 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
515 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
517 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
519 * configure.in: Call AC_PROG_CC before configure.host.
520 * configure: Rebuild.
522 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
524 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
526 * i386-dis.c (onebyte_has_modrm): New static array.
527 (twobyte_has_modrm): New static array.
528 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
530 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
532 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
535 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
537 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
540 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
542 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
543 m68010up, not just m68020up | cpu32.
545 * Makefile.in (SONAME): New variable.
546 ($(SHLINK)): Make a link to the transformed name, as well.
547 (stamp-tshlink): New target.
548 (install): Skip stamp-tshlink during install.
550 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
552 * configure.in: Call AC_ARG_PROGRAM.
553 * configure: Rebuild.
554 * Makefile.in (program_transform_name): New variable.
555 (install): Transform library name before installing it.
557 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
559 * i960-dis.c (mem): Add HX dcinva instruction.
561 Support for building as a shared library, based on patches from
562 Alan Modra <alan@spri.levels.unisa.edu.au>:
563 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
564 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
565 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
566 * configure: Rebuild.
567 * Makefile.in (ALLLIBS): New variable.
568 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
569 (COMMON_SHLIB, SHLINK): New variables.
570 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
571 (STAGESTUFF): Remove variable.
572 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
573 (stamp-piclist, piclist): New targets.
574 ($(SHLIB), $(SHLINK)): New targets.
575 ($(OFILES)): Depend upon stamp-picdir.
576 (disassemble.o): Build twice if PICFLAG is set.
577 (MOSTLYCLEAN): Add pic/*.o.
578 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
579 (distclean): Remove pic and stamp-picdir.
580 (install): Install shared libraries.
581 (stamp-picdir): New target.
583 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
585 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
586 Print unknown instruction as "unknown", rather than in hex.
588 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
590 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
592 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
594 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
596 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
598 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
599 when necessary. From Ulrich Drepper
600 <drepper@myware.rz.uni-karlsruhe.de>.
602 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
604 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
605 sparc_num_opcodes. Update architecture enum values.
606 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
607 (sparc_opcode_lookup_arch): New function.
608 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
609 (sparc_opcodes): Add v9a shutdown insn.
611 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
613 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
614 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
616 (print_insn_sparc64): Deleted.
617 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
620 * sparc-opc.c (architecture_pname): Add v9a.
622 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
624 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
625 incorrectly defined as 0x16 when it should be 0x15.
626 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
627 (alpha_insn_set): added cvtst and cvttq float ops. Also added
628 excb (exception barrier) which is defined in the Alpha
629 Architecture Handbook version 2.
630 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
631 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
632 disassembled as or, for example.
634 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
636 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
637 (_print_insn_mips): Change i from int to unsigned int.
639 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
641 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
642 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
644 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
646 * i386-dis.c: Added Pentium Pro instructions.
648 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
650 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
653 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
655 * sh-opc.h (sh_nibble_type): Added REG_B.
656 (sh_arg_type): Added A_REG_B.
657 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
659 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
661 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
663 * disassemble.c (disassembler): Use new bfd_big_endian macro.
665 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
667 * Makefile.in (distclean): Remove stamp-h. From Ronald
668 F. Guilmette <rfg@monkeys.com>.
670 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
672 From David Mosberger-Tang <davidm@azstarnet.com>:
673 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
676 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
678 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
679 (sh_table): Added many SH3 opcodes.
680 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
682 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
684 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
685 (subco,subco.): Mark this PPC, not PPCCOM.
687 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
689 * configure: Rebuild with autoconf 2.7.
691 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
693 * configure: Rebuild with autoconf 2.6.
695 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
697 * configure.in: Sort list of architectures. Accept but do nothing
698 for alliant, convex, pyramid, romp, and tahoe.
700 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
702 * a29k-dis.c (print_special): Change num to unsigned int.
704 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
706 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
709 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
711 * configure.in: Call AC_CHECK_PROG to find and cache AR.
712 * configure: Rebuilt.
714 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
716 * configure.in: Add case for bfd_i860_arch.
717 * configure: Rebuild.
719 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
721 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
722 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
723 (NEXTDOUBLE): Likewise.
724 (print_insn_m68k): Don't match fmoveml if there is more than one
725 register in the list.
726 (print_insn_arg): Handle a place of '8' for a type of 'L'.
728 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
730 * m68k-opc.c: Use #W rather than #w.
731 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
733 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
735 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
736 and likewise for all the dbxx opcodes.
738 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
740 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
742 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
744 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
745 the VR4100 specific instructions to the mips_opcodes structure.
747 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
749 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
750 ugly Metrowerks bug in CW6, is fixed in CW7.
752 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
754 * ppc-opc.c (whole file): Add flags for common/any support.
756 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
758 * Makefile.in (BISON): Remove macro.
759 (FLAGS_TO_PASS): Remove BISON.
761 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
763 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
765 * m68k-dis.c (print_insn_m68k): Recognize all two-word
766 instructions that take no args by looking at the match mask.
767 (print_insn_arg): Always print "%" before register names.
768 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
769 [case '_']: Don't print "@#" before address.
770 [case 'J']: Use "%s" as format string, not register name.
771 [case 'B']: Treat place == 'C' like 'l' and 'L'.
773 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
775 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
778 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
780 From David Mosberger-Tang <davidm@azstarnet.com>
782 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
783 (alpha_insn_set): added definitions for VAX floating point
784 instructions (Unix compilers don't generate these, but handcoded
785 assembly might still use them).
787 * alpha-dis.c (print_insn_alpha): added support for disassembling
788 the miscellaneous instructions in the Alpha instruction set.
790 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
792 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
793 no longer create sysdep.h, sed ppc-opc.c to work around a
794 serious Metrowerks C bug.
795 * mpw-make.in: Remove.
796 * mpw-make.sed: New file, used by mpw-configure to edit
797 Makefile.in into an MPW makefile.
799 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
801 * Makefile.in (maintainer-clean): New synonym for realclean.
803 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
805 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
806 which use '0', '1', and '2' instead. Specify the proper size for
807 a pmove immediate operand. Correct the pmovefd patterns to be
808 moves to a register, not from a register.
809 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
811 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
813 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
814 %psr, %wim, %tbr as F_NOTV9.
816 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
818 * Makefile.in (Makefile): Just rebuild Makefile when running
820 (config.h, stamp-h): New targets.
821 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
822 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
824 * configure: Rebuild.
826 * mips-opc.c: Change unaligned loads and stores with "t,A"
827 operands to use "t,A(b)".
829 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
831 * sh-dis.c (print_insn_shx): Add F_FR0 support.
833 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
835 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
836 until 3 instead of until 2.
838 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
840 * Makefile.in (ALL_CFLAGS): Define.
841 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
842 (MOSTLYCLEAN): Add config.log.
843 (distclean): Don't remove config.log.
844 * configure.in: Substitute HDEFINES.
845 * configure: Rebuild.
847 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
849 * sh-opc.h (sh_arg_type): Add F_FR0.
850 (sh_table, case fmac): Add F_FR0 as first argument.
852 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
854 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
856 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
858 * sparc-dis.c: Remove all references to NO_V9.
860 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
862 * aclocal.m4: Just include ../bfd/aclocal.m4.
863 * configure: Rebuild.
865 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
867 * sparc-dis.c (X_DISP19): Define.
868 (print_insn, case 'G'): Use it.
869 (print_insn, case 'L'): Sign extend displacement.
871 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
873 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
874 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
875 host_makefile_frag or frags.
876 * aclocal.m4: New file.
877 * configure: Rebuild.
878 * Makefile.in (INSTALL): Set to @INSTALL@.
879 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
880 (INSTALL_DATA): Set to @INSTALL_DATA@.
882 (AR_FLAGS): Set to rc rather than qc.
883 (CC): Define as @CC@.
884 (CFLAGS): Set to @CFLAGS@.
885 (@host_makefile_frag@): Remove.
886 (config.status): Remove dependency upon @frags@.
888 * configure.in: ../bfd/config.bfd now just sets shell variables.
889 Use them rather than looking through target Makefile fragments.
890 * configure: Rebuild.
892 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
894 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
896 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
898 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
899 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
902 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
903 (lookup_{name,value}): New functions.
904 (prefetch_table): New static local.
905 (sparc_{encode,decode}_prefetch): New functions.
906 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
908 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
910 * sh-opc.h: Add blank lines to improve readabililty of sh3e
913 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
915 * sh-dis.c: Correct comment on first line of file.
917 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
919 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
921 * sparc-opc.c (asi, membar): New static locals.
922 (sparc_{encode,decode}_{asi,membar}): New functions.
923 (sparc_opcodes, membar insn): Fix.
924 * sparc-dis.c (print_insn): Call sparc_decode_asi.
925 Support decoding of membar masks.
928 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
930 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
932 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
934 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
935 and likewise for the other branches. Add bhs as an alias for bcc,
936 and likewise for the size variants. Add dbhs as an alias for
939 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
941 * sh-opc.h (FP sts instructions): Update to match reality.
943 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
945 * m68k-dis.c: (fpcr_names): Add % before all register names.
946 (reg_names): Likewise.
947 (print_insn_arg): Don't explicitly print % before register names.
948 Add % before register names in static array names. In case 'r',
949 print data registers as `@(Dn)', not `Dn@'. When printing a
950 memory address, don't print @# before it.
951 (print_indexed): Change base_disp and outer_disp from int to
952 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
953 syntax. Sign extend 8 byte displacement correctly.
954 (print_base): Print using MIT syntax. Print zpc when appropriate.
955 Change parameter disp from int to bfd_vma.
957 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
960 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
962 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
963 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
964 * sh-opc.h (sh_arg_type): Add new operand types.
965 (sh_table): Add new opcodes from SH3E Floating Point ISA.
967 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
969 * Makefile.in (distclean): Remove generated file config.h.
971 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
973 * Makefile.in (distclean): Remove generated file config.h.
975 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
977 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
979 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
981 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
982 rather than numopcodes. Use m68k_opcodes rather than removed
983 opcode function. Don't check F_ALIAS.
984 (print_insn_arg): Change first parameter to be const char *.
985 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
986 (m68k-opc.o): New target.
987 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
988 * configure: Rebuild.
990 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
992 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
993 (opcode_bits, opcode_hash_table): New variables.
994 (opcodes_initialized): Renamed from opcodes_sorted.
995 (build_hash_table): New function.
996 (is_delayed_branch): Use hash table.
997 (print_insn): Renamed from print_insn_sparc, made static.
998 Build and use hash table. If !sparc64, ignore sparc64 insns,
999 and vice-versa if sparc64.
1000 (print_insn_sparc, print_insn_sparc64): New functions.
1001 (compare_opcodes): Move sparc64 opcodes to end.
1002 Print commutative insns with constant second.
1003 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1005 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1007 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1008 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1009 avoids printing a delay slot in a delay slot.
1010 * sh-opc.h (sh_table): Fully bracket last entry.
1012 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1014 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1016 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1018 * configure.in: Get host_makefile_frag from ${srcdir}.
1020 * configure.in: Autoconfiscated. Check for string[s].h. Create
1021 config.h from config.in. Don't set up sysdep.h link.
1022 * sysdep.h: New file.
1023 * configure, config.in: New files, generated from configure.in.
1024 * Makefile.in: Updated to be processed autoconf-style.
1025 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1026 (Makefile): Depend on config.status.
1027 (config.status): New rule.
1028 * configure.bat: Update Makefile substitutions.
1030 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1032 * mips-opc.c (L1): Define.
1033 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1034 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1037 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1039 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1040 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1041 have multiple add units but only a single logical unit.
1043 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1044 shifted by 18, without any insertion or extraction function.
1045 (insert_cr, extract_cr): Remove.
1048 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1050 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1053 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1055 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1058 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1060 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1061 * sh-opc.h: Add copyright.
1063 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1065 * Makefile.in (crunch-m68k): Delete extra target accidentally
1066 checked in a while ago.
1068 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1070 * sh-opc.h (sh_table): Add SH3 support.
1072 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1074 * sh-opc.h: Added bsrf and braf.
1076 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1078 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1079 bogus [ls]fm{ea,fd} patterns.
1081 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1082 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1083 initialize it from memory. Make function static.
1084 (print_insn_{big,little}_arm): New functions.
1085 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1086 the correct endianness.
1089 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1091 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1092 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1095 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1097 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1100 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1102 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1103 17th, so that it builds again using GCC as the compiler.
1105 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1107 * mips-dis.c (print_insn_little_mips): Cast return value from
1108 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1109 expects an unsigned long, and that might be fewer words of
1110 argument storage (e.g., if bfd_vma is long long on a 32-bit
1112 (print_insn_big_mips): Likewise with bfd_getb32 value.
1113 (_print_insn_mips): Now static.
1115 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1117 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1118 gcc memory hog problem with initializer is fixed.
1121 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1123 * arc-opc.c (NULL): Define.
1124 (arc_operands, insn fields u,s): Delete.
1125 (arc_operands, insn fields a,b,c): Mark as signed.
1126 (arc_opcodes): No longer const, links computed at run-time.
1127 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1128 suffixes that affect the insn code.
1129 (arc_opcodes): Resort table to macros are first.
1130 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1131 (arc_opcodes, st [b] entry): Likewise.
1132 (arc_opcodes, st [b,d] entry): Fix mask, value.
1133 (arc_reg_names): Add entries for r29, r30, r31, r60.
1134 (opcode_map, icode_map): New static globals.
1135 (arc_opcode_init_tables): Initialize them.
1136 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1137 (insert_shimmoffset): Signal error if register present.
1139 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1142 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1144 Merge in support for Mac MPW as a host.
1145 (Old change descriptions retained for informational value.)
1147 * mpw-config.in (archname): Compute from the config.
1148 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1150 * mpw-config.in (target_arch): Compute from canonical target.
1151 (m68k, mips, powerpc, sparc): Add architectures.
1152 * mpw-make.in (disassemble.c.o): Add.
1153 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1155 * mpw-config.in (BFD_MACHINES): Set to a default value.
1156 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1158 * mpw-make.in (CSEARCH): Add extra-include to search path.
1160 * mpw-config.in (varargs.h): Don't create.
1161 (sysdep.h): Create using forward-include.
1162 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1164 * mpw-config.in: New file, MPW version of configure.in.
1165 * mpw-make.in: New file, MPW version of Makefile.in.
1168 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1170 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1171 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1172 (print_insn_*): Pass bfd mach number, not opcode version.
1173 * arc-opc.c (arc_get_opcode_mach): New function.
1176 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1178 * alpha-dis.c (print_insn_alpha): Put empty statement after
1181 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1183 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1184 (low_sign_extend): Likewise.
1185 (get_field): Delete unused function.
1186 (set_field, deposit_14, deposit_21): Likewise.
1188 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1190 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1193 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1195 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1197 * alpha-opc.h (OSF_ASMCODE): define
1198 print pal-code names as defined in App C of the
1199 Alpha Architecture Reference Manual
1201 * alpha-dis.c: cleaned up output
1202 print stylized code forms as defined in App A.4.3 of the
1203 Alpha Architecture Reference Manual
1205 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1207 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1209 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1212 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1214 * m68k-dis.c (opcode): New function. Returns address of opcode
1215 table entry given index, even if the opcode table was split to
1216 work around gcc bugs.
1217 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1219 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1220 (reg_names): Now const.
1221 (print_insn_arg): Arrays cacheFieldName and names now const.
1222 (print_indexed): Array scales now const.
1225 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1227 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1228 (print_insn_arc_{host,graphics,audio}): Likewise.
1229 (print_insn): Add prototype.
1230 (arc_get_disassembler): New arg `big_p'. Return little or big
1231 print fn accordingly.
1232 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1233 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1234 (arc_opval_supported): Likewise.
1235 * disassemble.c (disassembler): Pass big endian flag to
1236 arc_get_disassembler.
1239 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1241 * ppc-opc.c: Sort recently added instructions by minor opcode
1242 number within major opcode number.
1244 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1246 * hppa-dis.c: Include libhppa.h.
1248 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1250 * mips-opc.c: Change dli to use M_DLI, and add dla.
1252 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1254 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1257 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1259 * arc-dis.c (arc_get_disassembler): Change argument to int,
1260 one of bfd_mach_arc_xxx. All callers updated.
1263 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1265 * mips-opc.c: Add r4650 mul instruction.
1267 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1269 * mips-opc.c: Add uld and usd macros for unaligned double load and
1272 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1274 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1275 mfdcr, mtdcr, icbt, iccci.
1278 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1280 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1281 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1282 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1283 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1284 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1285 (insert_absaddr): New function.
1287 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1289 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1290 New argument `cpu', pass it to arc_opcode_init_tables.
1291 Document byte order dependencies. Ignore unsupported insns.
1292 (arc_get_disassembler): New function.
1293 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1294 print_insn_arc_audio): New functions.
1295 * arc-opc.c (MULTSHIFT operand): Delete.
1296 (UNSIGNED, SATURATION): New operands.
1297 (mac, mul, mul64, mulu64): New insns.
1298 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1299 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1300 (host,graphics,audio extended and auxiliary regs): Define.
1301 (ss, sc, mh, ml): New suffixes.
1302 (arc_opcode_supported, arc_opval_supported): New functions.
1303 (insert_multshift, extract_multshift): Deleted.
1304 * disassemble.c (disassembler, case bfd_arch_arc): Call
1305 arc_get_disassembler to get disassembler routine.
1308 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1310 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1311 signed char fields to shorts, more portable.
1313 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1315 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1316 char fields as signed chars, since they may have negative values.
1318 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1320 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1321 (mycroft@netbsd.org).
1323 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1325 From "Logg, Ed" <elogg@ea.com>:
1326 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1327 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1330 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1332 * ppc-opc.c: Changes based on patch from David Edelsohn
1333 <edelsohn@mhpcc.edu>.
1334 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1337 (insert_tbr): New static function.
1338 (extract_tbr): New static function.
1339 (XFXFXM_MASK, XFXM): Define.
1340 (XSPRBAT_MASK, XSPRG_MASK): Define.
1341 (powerpc_opcodes): Add instructions to access special registers by
1342 name. Add mtcr and mftbu.
1344 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1346 * mips-opc.c (P3): Define.
1347 (mips_opcodes): Add mad and madu.
1349 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1351 * configure.in: Add W65 support.
1352 * disassemble.c: Likewise.
1353 * w65-opc.h, w65-dis.c: New files.
1355 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1357 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1361 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1363 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1365 * arc-opc.c (extract_reladdr): New function.
1366 (insert_reladdr): Store address right-shifted by 2.
1369 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1371 * mips-opc.c: Add dli as a synonym for li.
1374 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1376 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1378 (extraction fns): Insn argument now array of two words. Return pointer
1379 to value's table entry. All uses changed.
1380 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1381 (insert_multshift, extract_multshift): New fns.
1382 (arc_operands): Add support for cache bypass suffix. Add support for
1383 predefined aux regs. Modifier bits moved to flags field.
1384 (arc_opcodes): Likewise.
1385 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1386 New insn rlc. Update to syntax in programmer's manual.
1387 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1388 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1390 (arc_opcode_init_tables): New argument to indicate cpu type.
1391 (insert_reg): Handle predefined aux regs.
1392 (extract_reg): Likewise.
1393 (lookup_register): New fn.
1394 * arc-dis.c (arc_condition_codes): Deleted.
1395 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1396 Clean up modifier handling. Handle predefined aux regs.
1399 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1401 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1402 print something for reserved opcode values, even if it won't
1405 * mips-dis.c (_print_insn_mips): When initializing, shift right
1406 and mask, to avoid sign extension problems on the Alpha.
1408 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1412 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1414 * configure.in: Add ARC support.
1415 * disassemble.c: Likewise.
1416 * arc-dis.c, arc-opc.c: New files.
1419 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1421 * sh-opc.h (mov.l gbr): Get direction right.
1422 * sh-dis.c (print_insn_shx): New function.
1423 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1424 print opcodes with right byte order.
1426 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1428 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1429 to avoid conflicts with getopt.
1431 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1433 * hppa-dis.c (print_insn_hppa): Read the instruction using
1434 bfd_getb32, so that it works on a little endian or 64 bit host.
1435 Remove unused local variable op.
1437 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1439 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1440 addu does not work correctly if -mips3.
1442 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1444 * a29k-dis.c (print_special): Add special register names defined
1445 on 29030, 29040 and 29050.
1446 (print_insn): Handle new operand type 'I'.
1448 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1450 * Makefile.in (INSTALL): Use top level install.sh script.
1452 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1454 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1455 that it works on a little endian host.
1457 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1459 * configure.in: Use ${config_shell} when running config.bfd.
1461 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1463 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1465 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1467 * a29k-dis.c (print_insn): Print the opcode.
1469 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1471 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1473 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1475 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1477 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1479 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1480 which store a value into memory.
1482 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1484 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1485 * arm-dis.c, arm-opc.h: New files.
1487 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1489 * Makefile.in (ns32k-dis.o): Add dependency.
1490 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1491 string, not as array of chars.
1493 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1495 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1497 * sparc-opc.c: Added sparclite extended FP operations, and
1498 versions of v9 impdep* instructions permitting specification of
1501 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1503 * i960-dis.c (reg_names): Now const.
1504 (struct sparse_tabent): New type, copied from array type in mem
1506 (ctrl): Local static array ctrl_tab now const.
1507 (cobr): Local static array cobr_tab now const.
1508 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1509 static variable mem_tab no longer explicitly initialized. Changed
1510 mem_init to const array of struct sparse_tabent.
1511 (reg): Local static variable reg_tab no longer explicitly
1512 initialized. Changed reg_init to const array of struct
1514 (ea): Local static array scale_tab now const.
1516 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1519 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1521 * configure.bat: the disassember needs to be enabled for
1522 "objdump -d" to work in djgpp.
1524 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1526 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1527 (invalid_float): Enabled general version, doesn't require running
1528 on ns32k host. Changed to take char* argument, and test for
1529 explicitly specified sizes, instead of using sizeof() on host CPU
1531 (INVALID_FLOAT): Cast first argument.
1532 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1533 list_P032, list_M032): Now const.
1534 (optlist, list_search): Made appropriate arguments now point to
1536 (print_insn_arg): Changed static array of one-character-string
1537 pointers into a static const array of characters; fixed sprintf
1538 statement accordingly.
1540 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1542 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1543 from distribution. A ns32k-dis.c from a previous distribution has
1544 been brought up to date and supports the new interface.
1546 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1548 * configure.in: add bfd_ns32k_arch target support.
1550 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1551 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1553 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1555 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1558 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1560 * h8300-dis.c, mips-dis.c: Don't use true and false.
1562 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1564 * configure.in: Change --with-targets to --enable-targets.
1566 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1568 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1569 opcodes to the first instruction with that opcode, to speed
1570 disassembly of large files. From ralphc@pyramid.com (Ralph
1573 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1575 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1577 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1579 * configure.bat: update to latest makefile.in
1581 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1583 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1584 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1585 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1586 slot insn is in a delay slot.
1587 * z8k-opc.h: (resflg): Fix patterns.
1588 * h8500-opc.h Fix CR insn patterns.
1590 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1592 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1593 "cmpl" before POWER versions, so that gas -many uses them.
1595 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1597 * disassemble.c: New file.
1598 * Makefile.in (OFILES): Add disassemble.o.
1599 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1600 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1601 binutils/configure.in.
1603 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1604 opcode being examined.
1606 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1608 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1609 (insert_ral, insert_ram, insert_ras): New functions.
1610 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1611 RAS for store with update.
1613 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1615 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1616 (edelsohn@npac.syr.edu).
1618 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1620 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1623 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1625 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1627 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1629 * ppc-opc.c (powerpc_operands): The signedp field has been
1630 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1631 instead. Add new operand SISIGNOPT.
1632 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1633 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1634 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1637 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1639 * i386-dis.c (struct private): Renamed to dis_private. `private'
1640 is a reserved word for dynix cc.
1642 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1644 * configure.in: Change error message to refer to bfd/config.bfd
1645 rather than bfd/configure.in.
1647 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1649 * ppc-opc.c: Define POWER2 as short alias flag.
1650 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1653 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1655 * i960-dis.c (print_insn_i960): Don't read a second word for
1656 opcodes 0, 1, 2 and 3.
1658 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1660 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1662 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1664 * m68881-ext.c: Removed; no longer used.
1665 * Makefile.in: Changed accordingly.
1667 * m68k-dis.c (ext_format_68881): Don't declare.
1668 (print_insn_m68k): If an instruction uses place 'i', it uses at
1669 least four fixed bytes.
1670 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1671 extended float, convert to double using floatformat_to_double, not
1672 ieee_extended_to_double, and fetch the data before converting it.
1674 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1676 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1677 davidj@ICSI.Berkeley.EDU (David Johnson).
1679 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1681 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1682 PowerPC uses bdnz[l][a].
1684 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1686 * dis-buf.c, i386-dis.c: Include sysdep.h.
1688 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1690 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1692 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1693 by Motorola PowerPC 601 with PPC_OPCODE_601.
1694 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1695 Disassemble Motorola PowerPC 601 instructions as well as normal
1696 PowerPC instructions.
1698 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1700 * i960-dis.c (reg, mem): Just use a static array instead of
1703 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1705 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1706 condition name index if this is for a negated condition.
1708 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1709 Floating point format for 'H' operand is backwards from normal
1710 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1711 operands (fmpyadd and fmpysub), handle bizarre register
1712 translation correctly for single precision format.
1714 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1715 or 'I' operands if the next format specifier is 'M' (fcmp
1716 condition completer).
1718 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1720 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1721 single number giving a bitmask for the MB and ME fields of an M
1722 form instruction. Change NB to accept 32, and turn it into 0;
1723 also turn 0 into 32 when disassembling. Seperated SH from NB.
1724 (insert_mbe, extract_mbe): New functions.
1725 (insert_nb, extract_nb): New functions.
1726 (SC_MASK): Mask out SA and LK bits.
1727 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1728 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1729 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1730 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1731 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1732 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1733 (powerpc_macros): Define table of macro definitions.
1734 (powerpc_num_macros): Define.
1736 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1737 if PPC_OPERAND_NEXT is set.
1739 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1741 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1742 char. Retrieve contents using bfd_getl32 instead of shifting.
1744 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1746 * ppc-opc.c: New file. Opcode table for PowerPC, including
1747 opcodes for POWER (RS/6000).
1748 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1749 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1750 (CFILES): Add ppc-dis.c.
1751 (ppc-dis.o, ppc-opc.o): New targets.
1752 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1754 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1756 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1757 No space before 'u', 'f', or 'N'.
1759 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1761 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1762 farther than we should.
1764 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1766 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1768 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1770 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1772 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1773 needs it, to prevent reading past the end of a section.
1775 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1777 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1778 Removed t,A case for la; always use t,A(b) case.
1780 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1782 From Ted Lemen <mellon@pepper.ncd.com>
1783 * mips-dis.c (print_insn_arg): Handle 'k'.
1784 * mips-opc.c: Make cache use k, not t.
1786 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1788 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1789 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1790 FLOAT_FORMAT_CODE to put out floating point register names.
1792 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1794 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1796 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1798 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1800 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1802 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1803 larger than 32. Moved dsxx32 variants first for disassembler.
1805 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1807 * z8kgen.c, z8k-opc.h: Add full lda information.
1809 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1811 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1812 movb instructions. Any necessary space will be emitted by
1813 the code to handle nullification completers.
1815 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1817 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1819 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1821 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1822 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1824 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1826 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1828 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1830 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1831 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1833 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1835 * m88k-dis.c (m88kdis): comment change. Remove space after
1837 (printop): handle new arg types DEC and XREG for m88110.
1839 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1841 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1842 type for absolute branch addresses. Delete special
1843 "ble" and "be" code in 'W' operand code.
1845 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1847 * mips-opc.c: Set hazard information correctly for branch
1848 likely instructions.
1850 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1852 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1853 info->fprintf_func for printing and info->print_address_func for
1856 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1858 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1860 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1862 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1863 Corrected second case of "b" for disassembler.
1865 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1867 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1868 to BFD swapping routines to correspond to BFD name changes.
1870 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1872 * mips-opc.c: Change div machine instruction to be z,s,t rather
1873 than s,t. Change div macro to be d,v,t rather than d,s,t.
1874 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1875 rem and remu which generates only the corresponding div
1876 instruction. This is for compatibility with the MIPS assembler,
1877 which only generates the simple machine instruction when an
1878 explicit destination of $0 is used.
1879 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1881 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1883 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1884 WR_31 hazard for bal, bgezal, bltzal.
1886 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1888 * hppa-dis.c (print_insn_hppa): Use print function
1889 from within the disassemble_info, not fprintf_filtered.
1891 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1893 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1894 Law, law@cs.utah.edu.)
1896 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1898 * mips-opc.c ("absu"): Removed.
1901 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1903 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1904 Changed hazard information to distinguish between memory load
1905 delays and coprocessor load delays.
1907 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1909 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1911 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1913 * configure.in: Don't pass cpu to config.bfd.
1915 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1917 * m88k-dis.c (m88kdis): Make class unsigned.
1919 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1921 * alpha-dis.c (print_insn_alpha): One branch format case was
1922 missing the instruction name.
1924 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1926 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1927 Add the arch-specific auxiliary files.
1928 (OFILES): Remove the arch-specific auxiliary files
1929 and use BFD_MACHINES instead of DIS_LIBS.
1930 * configure.in: Set BFD_MACHINES based on --with-targets option.
1932 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1934 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1937 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1939 * sparc-opc.c: Change CONST to const to deal with gcc
1940 -Dconst=__const -traditional.
1942 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1944 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1945 coprocessor instructions out of #if 0, and made them use new
1948 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1950 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1952 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1954 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1955 instruction, for use by the disassembler.
1957 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1958 hand-coded sign extensions that depended on 32-bit host ints.
1959 FIXME, we still depend on big-endian host bitfield ordering.
1960 (sparc_print_insn): Set the insn_info_valid field, and the
1961 other fields that describe the instruction being printed.
1963 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1965 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1966 `jmp' instead of just one of them.
1968 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1970 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1971 (fput_fp_reg_r): Renamed from fput_reg_r.
1972 (fput_fp_reg): New function.
1973 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1975 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1977 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1979 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1981 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1983 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1984 don't output a space.
1986 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1988 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1990 * mips-opc.c: New file, containing opcode table from
1991 ../include/opcode/mips.h.
1992 * Makefile.in: Add it.
1994 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1996 * m88k-dis.c: New file, moved in from gdb and changed to use the
1997 new dis-asm.h disassembler interface.
1998 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1999 (m88k-dis.o): New target.
2001 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2003 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2004 argument string const char * to correspond to opcode/mips.h.
2006 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2008 * mips-dis.c: Updated to account for name changes in new version
2010 * Makefile.in: Added header file dependencies.
2012 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2014 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2016 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2018 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2019 extend, rather than shifts.
2021 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2023 * Makefile.in: Undo 15 June change.
2025 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2027 * m68k-dis.c (print_insn_arg): Change return value to byte count
2029 * m68k-dis.c: Re-write to detect invalid operands before
2030 printing anything, so we can handle this the same way we
2031 handle invalid opcodes.
2033 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2035 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2037 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2039 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2042 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2044 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2046 * configure.in: Do make sysdep.h link.
2047 * Makefile.in: Search ../include. Don't search ../bfd.
2049 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2051 Changes from Jeff Law, law@cs.utah.edu:
2052 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2053 Do not print a space before the completers specified by
2056 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2058 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2059 defined, since gdb has been fixed.
2061 Changes from Jeff Law, law@cs.utah.edu:
2062 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2063 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2064 be a *disassemble_info, not a *FILE.
2065 * hppa-dis.c: Support 'd', '!', and 'a'.
2066 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2067 * hppa-dis.c: Delete cases which are no longer needed.
2069 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2071 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2073 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2075 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2078 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2080 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2081 * configure.in: No longer need to configure to get sysdep.h.
2083 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2085 * Patches from Jeffrey Law <law@cs.utah.edu>.
2086 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2087 templates for 1.1 FP computational instructions.
2089 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2091 * h8500-dis.c (print_insn_h8500): Address argument is type
2093 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2096 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2097 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2099 * sparc-dis.c (compare_opcodes): Move static declaration to
2102 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2104 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2105 instruction, remove unimp hack from 'l' argument.
2107 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2109 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2112 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2114 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2115 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2118 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2120 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2121 arrays of string pointers to 2-d arrays of chars, to save
2124 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2126 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2127 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2129 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2131 * hppa-dis.c: New file from Utah, adapted to new disassembler
2133 * Makefile.in: Include it.
2135 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2137 * sh-dis.c, sh-opc.h: New files.
2139 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2141 * alpha-dis.c, alpha-opc.h: New files.
2143 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2145 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2148 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2150 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2152 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2154 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2157 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2159 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2160 and double percent signs a few places.
2162 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2164 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2165 Use info->print_address_func not print_address.
2167 * dis-buf.c (generic_print_address): New function.
2169 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2171 * Makefile.in: Add sparc-dis.c.
2172 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2174 Add `add' instruction to the set that get checked
2175 for a preceding `sethi' in order to print an absolute address.
2176 * (print_insn): Disassembly prefers real instructions.
2177 (is_delayed_branch): Speed up.
2178 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2179 Still missing some float ops, and needs testing.
2180 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2181 F_ALIAS. Use printf, not fprintf, when not passing a file
2183 (compare_opcodes): Check that identical instructions have
2184 identical opcodes, complain otherwise.
2187 * Include reg_names.
2189 Use dis-asm.h/read_memory_func interface.
2191 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2193 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2194 deliberately return non-zero to setjmp from longjmp. Otherwise
2195 this code fails to compile.
2197 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2199 * m68k-dis.c: Fix prototype for fetch_arg().
2201 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2203 * dis-buf.c: New file, for new read_memory_func interface.
2204 Makefile.in (OFILES): Include it.
2205 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2206 Use new read_memory_func interface.
2208 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2210 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2211 * h8500-opc.h: Fix couple of opcodes.
2213 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2215 * Makefile.in: add dvi & installcheck targets
2217 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2219 * Makefile.in: Update for h8500-dis.c.
2221 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2223 * h8500-dis.c, h8500-opc.h: New files
2225 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2227 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2228 ../include/dis-asm.h.
2229 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2230 and ../gdb/m68k-pinsn.c).
2231 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2232 and ../gdb/i386-pinsn.c).
2233 * m68881-ext.c: New file. Moved definition of
2234 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2235 * Makefile.in: Adjust for new files.
2236 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2237 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2238 can be dis-assembled.
2240 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2242 * mips-dis.c (print_insn_arg): Now returns void.
2244 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2246 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2247 files that use the macros.
2249 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2251 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2252 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2253 (CFILES): Added mips-dis.c.
2255 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2257 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2258 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2260 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2262 * Makefile.in: Improve *clean rules.
2263 * configure.in: Allow a default host.
2265 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2267 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2268 files include other sysdep files
2270 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2272 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2274 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2276 * configure.in: For host support, use ../bfd/configure.host
2277 so it stays in sync with the ../bfd/hosts database.
2279 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2281 * configure.in: use cpu-vendor-os triple instead of nested cases
2283 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2285 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2286 *always* the wrong one.
2288 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2290 * z8kgen.c: added copyright info
2292 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2294 * z8k-dis.c (unparse_instr): prettier tabs
2295 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2297 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2299 * configure.in: Add ncr* configuration.
2300 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2301 picayune ANSI compilers happy.
2303 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2305 * configure.in (i386): Make i386 and i486 synonymous for now.
2306 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2308 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2310 * Makefile.in (install): Fix typo.
2312 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2314 * Makefile.in (make): Remove obsolete crud.
2315 (sparc-opc.o): Avoid Sun Make VPATH bug.
2317 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2319 * Makefile.in: since there are no SUBDIRS, remove rule and
2320 references of subdir_do.
2322 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2324 * Makefile.in (install): Get the library name right here too.
2325 Don't install bfd.h, since it's unrelated to this library. No
2326 subdirs to recurse into, either.
2327 (CFILES): The source file has a .c suffix, not .o.
2329 * sparc-opc.c: New file, moved from BFD.
2330 * Makefile.in (OFILES): Build it.
2332 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2334 * z8k-dis.c: fixed forward refferences of some declarations.
2336 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2338 * Makefile.in: get the name of the library right
2340 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2342 * z8k-dis.c: knows how to disassemble z8k stuff
2343 * z8k-opc.h: new file full of z8000 opcodes
2347 version-control: never
projects / deliverable / binutils-gdb.git / blob