1 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
6 * mn10300-opc.c (FMT*): Remove definitions.
8 * mn10300-opc.c (mn10300_opcodes): Fix destination register
9 for shift-by-register opcodes.
11 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
12 into [AD][MN][01] for encoding the position of the register
15 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
17 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
18 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
20 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
22 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
23 Fix various typos. Add "PAREN" operand.
25 (mn10300_opcodes): Surround all memory addresses with "PAREN"
26 operands. Fix several typos.
28 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
31 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
33 * mn10300-opc.c (FMT_XX): Renumber starting at one.
34 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
36 (mn10300_opcodes): Break opcode format out into its own field.
37 Update many operand fields to deal with signed vs unsigned
38 issues. Fix one or two typos in the "mov" instruction
39 opcode, mask and/or operand fields.
41 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
43 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
46 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
48 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
49 all opcodes. Very rough cut at operands for all opcodes.
51 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
54 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
56 * mn10200-opc.c, mn10300-opc.c: New files.
57 * mn10200-dis.c, mn10300-dis.c: New files.
58 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
59 * disassemble.c: Break mn10x00 support into 10200 and 10300
61 * configure.in: Likewise.
64 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
66 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
68 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
70 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
72 * disassemble (ARCH_mn10x00): Define.
73 (disassembler): Handle bfd_arch_mn10x00.
74 * configure.in: Recognize bfd_mn10x00_arch.
77 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
79 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
80 accordingly. Don't declare functions using op_rtn.
83 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
85 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
86 params to be more standard.
87 * (disassemble): Print absolute addresses and symbolic names for
88 branch and jump targets.
89 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
91 * (v850_opcodes): Add breakpoint insn.
94 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
96 * m68k-opc.c: Move the fmovemx data register cases before the
97 other cases, so that they get recognized before the data register
98 does gets treated as a degenerate register list.
100 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
102 * mips-opc.c: Add a case for "div" and "divu" with two registers
103 and a destination of $0.
105 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
107 * mips-dis.c (print_insn_arg): Add prototype.
108 (_print_insn_mips): Ditto.
110 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
112 * mips-dis.c (print_insn_arg): Print condition code registers as
115 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
117 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
120 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
122 * v850-dis.c (disassemble): Make static. Provide prototype.
124 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
126 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
129 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
131 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
132 ']' characters into the output stream.
133 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
134 Add "memop" field to all opcodes (for the disassembler).
135 Reorder opcodes so that "nop" comes before "mov" and "jr"
138 * v850-dis.c (print_insn_v850): Fix typo in last change.
140 * v850-dis.c (print_insn_v850): Properly handle disassembling
141 a two byte insn at the end of a memory region when the memory
142 region's size is only two byte aligned.
144 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
146 * v850-dis.c (v850_reg_names): Define.
147 (v850_sreg_names, v850_cc_names): Likewise.
148 (disassemble): Very rough cut at printing operands (unformatted).
150 * v850-opc.c (BOP_MASK): Fix.
151 (v850_opcodes): Fix mask for jarl and jr.
153 * v850-dis.c: New file. Skeleton for disassembler support.
154 * Makefile.in Remove v850 references, they're not needed here
155 and they weren't being sanitized away.
156 * configure.in: Add v850-dis.o when building v850 toolchains.
157 * configure: Rebuilt.
158 * disassemble.c (disassembler): Call v850 disassembler.
160 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
161 (insert_d8_6, extract_d8_6): New functions.
162 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
163 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
165 (IF4A, IF4B): Use "D7" instead of "D7S".
166 (IF4C, IF4D): Use "D8_7" instead of "D8".
167 (IF4E, IF4F): New. Use "D8_6".
168 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
169 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
171 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
172 (v850_operands): Change D16 to D16_15, use special insert/extract
173 routines. New new D16 that uses the generic insert/extract code.
174 (IF7A, IF7B): Use D16_15.
175 (IF7C, IF7D): New. Use D16.
176 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
178 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
179 message. Issue an error if the branch offset is odd.
181 * v850-opc.c: Add notes about needing special insert/extract
182 for all the load/store insns, except "ld.b" and "st.b".
184 * v850-opc.c (insert_d22, extract_d22): New functions.
185 (v850_operands): Use insert_d22 and extract_d22 for
187 (insert_d9): Fix range check.
189 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
191 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
192 and set bits field to D9 and D22 operands.
194 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
196 * v850-opc.c (v850_operands): Define SR2 operand.
197 (v850_opcodes): "ldsr" uses R1,SR2.
199 * v850-opc.c (v850_opcodes): Fix opcode specs for
200 sld.w, sst.b, sst.h, sst.w, and nop.
202 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
204 * v850-opc.c (v850_opcodes): Add null opcode to mark the
205 end of the opcode table.
209 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
211 * d10v-opc.c (pre_defined_registers): Added register pairs,
212 "r0-r1", "r2-r3", etc.
216 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
218 * v850-opc.c (v850_operands): Make I16 be a signed operand.
219 Create I16U for an unsigned 16bit mmediate operand.
220 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
222 * v850-opc.c (v850_operands): Define EP operand.
223 (IF4A, IF4B, IF4C, IF4D): Use EP.
225 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
226 with immediate operand, "movhi". Tweak "ldsr".
228 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
229 correct. Get sld.[bhw] and sst.[bhw] closer.
231 * v850-opc.c (v850_operands): "not" is a two byte insn
233 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
235 * v850-opc.c (v850_operands): D16 inserts at offset 16!
237 * v850-opc.c (two): Get order of words correct.
239 * v850-opc.c (v850_operands): I16 inserts at offset 16!
241 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
242 register source and destination operands.
243 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
245 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
246 same thinko in "trap" opcode.
248 * v850-opc.c (v850_opcodes): Add initializer for size field
251 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
252 Add D8 for 8-bit unsigned field in short load/store insns.
253 (IF4A, IF4D): These both need two registers.
254 (IF4C, IF4D): Define. Use 8-bit unsigned field.
255 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
256 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
257 for "ldsr" and "stsr".
258 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
261 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
262 short store word (sst.w).
264 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
266 * v850-opc.c (v850_operands): Added insert and extract fields,
267 pointers to functions that handle unusual operand encodings.
269 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
271 * v850-opc.c (v850_opcodes): Enable "trap".
273 * v850-opc.c (v850_opcodes): Fix order of displacement
274 and register for "set1", "clr1", "not1", and "tst1".
276 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
278 * v850-opc.c (v850_operands): Add "B3" support.
279 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
282 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
284 * v850-opc.c: Close unterminated comment.
286 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
288 * v850-opc.c (v850_operands): Add flags field.
289 (v850_opcodes): add move opcodes.
291 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
293 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
294 * configure: (bfd_v850v_arch) Add new case.
295 * configure.in: (bfd_v850_arch) Add new case.
296 * v850-opc.c: New file.
299 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
301 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
304 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
306 * d10v-opc.c: Add additional information to the opcode
307 table to help determinine which instructions can be done
311 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
313 * mpw-make.sed: Update editing of include pathnames to be
316 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
318 * arm-opc.h: Added "bx" instruction definition.
320 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
322 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
325 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
327 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
329 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
331 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
334 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
336 * makefile.vms: Update for alpha-opc changes.
338 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
340 * i386-dis.c (print_insn_i386): Actually return the correct value.
341 (ONE, OP_ONE): #ifdef out; not used.
344 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
346 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
347 Changed subi operand type to treat 0 as 16.
350 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
352 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
355 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
357 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
358 memory transfer instructions. Add new format string entries %h and %s.
359 * arm-dis.c: (print_insn_arm): Provide decoding of the new
363 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
365 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
366 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
369 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
371 * alpha-dis.c (print_insn_alpha_osf): Remove.
372 (print_insn_alpha_vms): Remove.
373 (print_insn_alpha): Make globally visible. Chose the register
374 names based on info->flavour.
375 * disassemble.c: Always return print_insn_alpha for the alpha.
378 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
380 * d10v-dis.c (dis_long): Handle unknown opcodes.
382 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
384 * d10v-opc.c: Changes to support signed and unsigned numbers.
385 All instructions with the same name that have long and short forms
386 now end in ".l" or ".s". Divs added.
387 * d10v-dis.c: Changes to support signed and unsigned numbers.
389 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
391 * d10v-dis.c: Change all functions to use info->print_address_func.
394 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
396 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
397 move ccr/sr insns more strict so that the disassembler only
398 selects them when the addressing mode is data register.
401 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
402 * d10v-opc.c (pre_defined_registers): Declare.
403 * d10v-dis.c (print_operand): Now uses pre_defined_registers
404 to pick a better name for the registers.
407 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
409 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
410 operands for fexpand and fpmerge. From Christian Kuehnke
411 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
413 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
415 * alpha-dis.c (print_insn_alpha): No longer the user-visible
416 print routine. Take new regnames and cpumask arguments.
417 Kill the environment variable nonsense.
418 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
419 (print_insn_alpha_vms): New function. Do VMS style regnames.
420 * disassemble.c (disassembler): Test bfd flavour to pick
421 between OSF and VMS routines. Default to OSF.
423 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
425 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
426 * configure: Rebuild.
427 * Makefile.in (install): Use @INSTALL_SHLIB@.
430 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
432 * configure: (bfd_d10v_arch) Add new case.
433 * configure.in: (bfd_d10v_arch) Add new case.
434 * d10v-dis.c: New file.
435 * d10v-opc.c: New file.
436 * disassemble.c (disassembler) Add entry for d10v.
439 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
441 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
442 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
444 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
446 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
447 distinguish between variants of the instruction set.
448 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
449 distinguish between variants of the instruction set.
451 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
453 * i386-dis.c (print_insn_i8086): New routine to disassemble using
454 the 8086 instruction set.
455 * i386-dis.c: General cleanups. Make most things static. Add
456 prototypes. Get rid of static variables aflags and dflags. Pass
457 them as args (to almost everything).
459 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
461 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
463 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
465 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
466 if the next arg is marked with SRC_IN_DST. Gross.
468 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
469 we're looking for and find EXR.
471 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
472 if we're looking for KBIT and we don't find it.
474 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
477 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
478 3bit immediate operands.
480 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
482 * Released binutils 2.7.
484 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
485 <kkaempf@progis.ac-net.de>.
487 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
489 * alpha-opc.c: Correct second case of "mov" to use OPRL.
491 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
493 * sparc-dis.c (print_insn_sparclite): New routine to print
494 sparclite instructions.
496 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
498 * m68k-opc.c (m68k_opcodes): Add coldfire support.
500 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
502 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
503 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
504 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
506 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
508 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
509 Use autoconf-set values.
510 (docdir, oldincludedir): Removed.
511 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
513 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
515 * alpha-opc.c: New file.
516 * alpha-opc.h: Remove.
517 * alpha-dis.c: Complete rewrite to use new opcode table.
518 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
519 * configure: Rebuild with autoconf 2.10.
520 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
521 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
523 (alpha-opc.o): New target.
525 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
527 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
528 Set imm_added_to_rs1 even if the source and destination register
531 * sparc-opc.c: Add some two operand forms of the wr instruction.
533 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
535 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
538 * disassemble.c (disassembler): Handle H8/S.
539 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
541 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
543 * sparc-opc.c: Add beq/teq as aliases for be/te.
545 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
546 <sergei@msil.sps.mot.com>.
548 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
550 * makefile.vms: New file.
552 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
554 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
556 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
559 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
561 * i386-dis.c (OP_OFF): Call append_prefix.
563 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
565 * ppc-opc.c (instruction encoding macros): Add explicit casts to
566 unsigned long to silence a warning from the Solaris PowerPC
569 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
571 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
573 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
575 * sparc-dis.c (X_IMM,X_SIMM): New macros.
577 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
578 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
579 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
580 cpush, cpusha, cpull sparclet insns.
582 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
584 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
586 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
588 * sparc-opc.c: Set F_FBR on floating point branch instructions.
589 Set F_FLOAT on other floating point instructions.
591 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
593 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
595 (powerpc_opcodes): Add 860/821 specific SPRs.
597 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
599 * configure.in: Permit --enable-shared to specify a list of
600 directories. Set and substitute BFD_PICLIST.
601 * configure: Rebuild.
602 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
603 uses. Set to @BFD_PICLIST@.
605 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
607 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
608 not "abs", which may be needed for the absolute in something
609 like btst #0,@10:8. Print L_3 immediates separately from other
610 immediates. Change ABSMOV reference to ABS8MEM.
612 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
614 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
615 (current_arch_mask): New static global.
616 (compute_arch_mask): New static function.
617 (print_insn_sparc): Delete sparc_v9_p. New static local
618 current_mach. Resort opcode table if current_mach changes.
619 Generalize "insn not supported" test.
620 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
621 Delete test for v9/!v9.
622 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
624 (brfc): Split into CBR and FBR for coprocessor/fp branches.
625 (brfcx): Renamed to FBRX.
626 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
627 coprocessor mnemonics are not supported on the sparclet).
628 (condf): Renamed to CONDF.
629 (SLCBCC2): Delete F_ALIAS flag.
631 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
633 * sparc-opc.c (sparc_opcodes): rd must be 0 for
634 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
636 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
638 * Makefile.in (config.status): Depend upon BFD VERSION file, so
639 that the shared library version number is set correctly.
641 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
643 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
644 Miles Bader <miles@gnu.ai.mit.edu>.
645 * configure: Rebuild.
647 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
649 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
652 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
654 * configure: Rebuild with autoconf 2.8.
656 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
658 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
659 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
661 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
663 * configure.in: Don't set SHLIB or SHLINK to an empty string,
664 since they appear as targets in Makefile.in.
665 * configure: Rebuild.
667 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
669 * mpw-make.sed: Edit out shared library support bits.
671 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
673 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
674 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
675 (sparc_opcodes): Add sparclet insns.
676 (sparclet_cpreg_table): New static local.
677 (sparc_{encode,decode}_sparclet_cpreg): New functions.
678 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
680 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
682 * i386-dis.c (index16): New static variable.
683 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
685 (OP_indirE): Return result of OP_E.
686 (OP_E): Check for 16 bit addressing mode, and disassemble
687 correctly. Optimised 32 bit case a little. Don't print
688 "(base,index,scale)" when sib specifies only an offset.
690 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
692 * configure.in: Set and substitute SHLIB_DEP.
693 * configure: Rebuild.
694 * Makefile.in (SHLIB_DEP): New variable.
695 (LIBIBERTY_LISTS, BFD_LIST): New variables.
696 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
697 COMMON_SHLIB, add them to piclist with appropriate modifications.
698 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
699 here: just use piclist.
701 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
703 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
704 (print_insn_sparc): Rewrite v9/not-v9 tests.
705 (compare_opcodes): Likewise.
706 * sparc-opc.c (MASK_<ARCH>): Define.
707 (v6,v7,v8,sparclite,v9,v9a): Redefine.
708 (sparclet,v6notv9): Define.
709 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
710 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
712 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
714 * configure.in: Call AC_PROG_CC before configure.host.
715 * configure: Rebuild.
717 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
719 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
721 * i386-dis.c (onebyte_has_modrm): New static array.
722 (twobyte_has_modrm): New static array.
723 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
725 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
727 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
730 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
732 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
735 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
737 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
738 m68010up, not just m68020up | cpu32.
740 * Makefile.in (SONAME): New variable.
741 ($(SHLINK)): Make a link to the transformed name, as well.
742 (stamp-tshlink): New target.
743 (install): Skip stamp-tshlink during install.
745 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
747 * configure.in: Call AC_ARG_PROGRAM.
748 * configure: Rebuild.
749 * Makefile.in (program_transform_name): New variable.
750 (install): Transform library name before installing it.
752 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
754 * i960-dis.c (mem): Add HX dcinva instruction.
756 Support for building as a shared library, based on patches from
757 Alan Modra <alan@spri.levels.unisa.edu.au>:
758 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
759 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
760 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
761 * configure: Rebuild.
762 * Makefile.in (ALLLIBS): New variable.
763 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
764 (COMMON_SHLIB, SHLINK): New variables.
765 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
766 (STAGESTUFF): Remove variable.
767 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
768 (stamp-piclist, piclist): New targets.
769 ($(SHLIB), $(SHLINK)): New targets.
770 ($(OFILES)): Depend upon stamp-picdir.
771 (disassemble.o): Build twice if PICFLAG is set.
772 (MOSTLYCLEAN): Add pic/*.o.
773 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
774 (distclean): Remove pic and stamp-picdir.
775 (install): Install shared libraries.
776 (stamp-picdir): New target.
778 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
780 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
781 Print unknown instruction as "unknown", rather than in hex.
783 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
785 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
787 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
789 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
791 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
793 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
794 when necessary. From Ulrich Drepper
795 <drepper@myware.rz.uni-karlsruhe.de>.
797 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
799 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
800 sparc_num_opcodes. Update architecture enum values.
801 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
802 (sparc_opcode_lookup_arch): New function.
803 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
804 (sparc_opcodes): Add v9a shutdown insn.
806 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
808 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
809 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
811 (print_insn_sparc64): Deleted.
812 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
815 * sparc-opc.c (architecture_pname): Add v9a.
817 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
819 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
820 incorrectly defined as 0x16 when it should be 0x15.
821 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
822 (alpha_insn_set): added cvtst and cvttq float ops. Also added
823 excb (exception barrier) which is defined in the Alpha
824 Architecture Handbook version 2.
825 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
826 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
827 disassembled as or, for example.
829 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
831 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
832 (_print_insn_mips): Change i from int to unsigned int.
834 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
836 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
837 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
839 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
841 * i386-dis.c: Added Pentium Pro instructions.
843 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
845 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
848 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
850 * sh-opc.h (sh_nibble_type): Added REG_B.
851 (sh_arg_type): Added A_REG_B.
852 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
854 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
856 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
858 * disassemble.c (disassembler): Use new bfd_big_endian macro.
860 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
862 * Makefile.in (distclean): Remove stamp-h. From Ronald
863 F. Guilmette <rfg@monkeys.com>.
865 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
867 From David Mosberger-Tang <davidm@azstarnet.com>:
868 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
871 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
873 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
874 (sh_table): Added many SH3 opcodes.
875 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
877 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
879 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
880 (subco,subco.): Mark this PPC, not PPCCOM.
882 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
884 * configure: Rebuild with autoconf 2.7.
886 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
888 * configure: Rebuild with autoconf 2.6.
890 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
892 * configure.in: Sort list of architectures. Accept but do nothing
893 for alliant, convex, pyramid, romp, and tahoe.
895 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
897 * a29k-dis.c (print_special): Change num to unsigned int.
899 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
901 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
904 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
906 * configure.in: Call AC_CHECK_PROG to find and cache AR.
907 * configure: Rebuilt.
909 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
911 * configure.in: Add case for bfd_i860_arch.
912 * configure: Rebuild.
914 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
916 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
917 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
918 (NEXTDOUBLE): Likewise.
919 (print_insn_m68k): Don't match fmoveml if there is more than one
920 register in the list.
921 (print_insn_arg): Handle a place of '8' for a type of 'L'.
923 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
925 * m68k-opc.c: Use #W rather than #w.
926 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
928 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
930 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
931 and likewise for all the dbxx opcodes.
933 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
935 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
937 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
939 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
940 the VR4100 specific instructions to the mips_opcodes structure.
942 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
944 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
945 ugly Metrowerks bug in CW6, is fixed in CW7.
947 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
949 * ppc-opc.c (whole file): Add flags for common/any support.
951 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
953 * Makefile.in (BISON): Remove macro.
954 (FLAGS_TO_PASS): Remove BISON.
956 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
958 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
960 * m68k-dis.c (print_insn_m68k): Recognize all two-word
961 instructions that take no args by looking at the match mask.
962 (print_insn_arg): Always print "%" before register names.
963 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
964 [case '_']: Don't print "@#" before address.
965 [case 'J']: Use "%s" as format string, not register name.
966 [case 'B']: Treat place == 'C' like 'l' and 'L'.
968 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
970 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
973 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
975 From David Mosberger-Tang <davidm@azstarnet.com>
977 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
978 (alpha_insn_set): added definitions for VAX floating point
979 instructions (Unix compilers don't generate these, but handcoded
980 assembly might still use them).
982 * alpha-dis.c (print_insn_alpha): added support for disassembling
983 the miscellaneous instructions in the Alpha instruction set.
985 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
987 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
988 no longer create sysdep.h, sed ppc-opc.c to work around a
989 serious Metrowerks C bug.
990 * mpw-make.in: Remove.
991 * mpw-make.sed: New file, used by mpw-configure to edit
992 Makefile.in into an MPW makefile.
994 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
996 * Makefile.in (maintainer-clean): New synonym for realclean.
998 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1000 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1001 which use '0', '1', and '2' instead. Specify the proper size for
1002 a pmove immediate operand. Correct the pmovefd patterns to be
1003 moves to a register, not from a register.
1004 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1006 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1008 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1009 %psr, %wim, %tbr as F_NOTV9.
1011 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1013 * Makefile.in (Makefile): Just rebuild Makefile when running
1015 (config.h, stamp-h): New targets.
1016 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1017 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1018 rebuilding config.h.
1019 * configure: Rebuild.
1021 * mips-opc.c: Change unaligned loads and stores with "t,A"
1022 operands to use "t,A(b)".
1024 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1026 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1028 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1030 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1031 until 3 instead of until 2.
1033 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1035 * Makefile.in (ALL_CFLAGS): Define.
1036 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1037 (MOSTLYCLEAN): Add config.log.
1038 (distclean): Don't remove config.log.
1039 * configure.in: Substitute HDEFINES.
1040 * configure: Rebuild.
1042 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1044 * sh-opc.h (sh_arg_type): Add F_FR0.
1045 (sh_table, case fmac): Add F_FR0 as first argument.
1047 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1049 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1051 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1053 * sparc-dis.c: Remove all references to NO_V9.
1055 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1057 * aclocal.m4: Just include ../bfd/aclocal.m4.
1058 * configure: Rebuild.
1060 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1062 * sparc-dis.c (X_DISP19): Define.
1063 (print_insn, case 'G'): Use it.
1064 (print_insn, case 'L'): Sign extend displacement.
1066 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1068 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1069 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1070 host_makefile_frag or frags.
1071 * aclocal.m4: New file.
1072 * configure: Rebuild.
1073 * Makefile.in (INSTALL): Set to @INSTALL@.
1074 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1075 (INSTALL_DATA): Set to @INSTALL_DATA@.
1077 (AR_FLAGS): Set to rc rather than qc.
1078 (CC): Define as @CC@.
1079 (CFLAGS): Set to @CFLAGS@.
1080 (@host_makefile_frag@): Remove.
1081 (config.status): Remove dependency upon @frags@.
1083 * configure.in: ../bfd/config.bfd now just sets shell variables.
1084 Use them rather than looking through target Makefile fragments.
1085 * configure: Rebuild.
1087 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1089 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1091 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1093 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1094 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1097 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1098 (lookup_{name,value}): New functions.
1099 (prefetch_table): New static local.
1100 (sparc_{encode,decode}_prefetch): New functions.
1101 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1103 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1105 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1108 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1110 * sh-dis.c: Correct comment on first line of file.
1112 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1114 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1116 * sparc-opc.c (asi, membar): New static locals.
1117 (sparc_{encode,decode}_{asi,membar}): New functions.
1118 (sparc_opcodes, membar insn): Fix.
1119 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1120 Support decoding of membar masks.
1123 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1125 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1127 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1129 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1130 and likewise for the other branches. Add bhs as an alias for bcc,
1131 and likewise for the size variants. Add dbhs as an alias for
1134 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1136 * sh-opc.h (FP sts instructions): Update to match reality.
1138 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1140 * m68k-dis.c: (fpcr_names): Add % before all register names.
1141 (reg_names): Likewise.
1142 (print_insn_arg): Don't explicitly print % before register names.
1143 Add % before register names in static array names. In case 'r',
1144 print data registers as `@(Dn)', not `Dn@'. When printing a
1145 memory address, don't print @# before it.
1146 (print_indexed): Change base_disp and outer_disp from int to
1147 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1148 syntax. Sign extend 8 byte displacement correctly.
1149 (print_base): Print using MIT syntax. Print zpc when appropriate.
1150 Change parameter disp from int to bfd_vma.
1152 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1155 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1157 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1158 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1159 * sh-opc.h (sh_arg_type): Add new operand types.
1160 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1162 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1164 * Makefile.in (distclean): Remove generated file config.h.
1166 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1168 * Makefile.in (distclean): Remove generated file config.h.
1170 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1172 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1174 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1176 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1177 rather than numopcodes. Use m68k_opcodes rather than removed
1178 opcode function. Don't check F_ALIAS.
1179 (print_insn_arg): Change first parameter to be const char *.
1180 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1181 (m68k-opc.o): New target.
1182 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1183 * configure: Rebuild.
1185 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1187 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1188 (opcode_bits, opcode_hash_table): New variables.
1189 (opcodes_initialized): Renamed from opcodes_sorted.
1190 (build_hash_table): New function.
1191 (is_delayed_branch): Use hash table.
1192 (print_insn): Renamed from print_insn_sparc, made static.
1193 Build and use hash table. If !sparc64, ignore sparc64 insns,
1194 and vice-versa if sparc64.
1195 (print_insn_sparc, print_insn_sparc64): New functions.
1196 (compare_opcodes): Move sparc64 opcodes to end.
1197 Print commutative insns with constant second.
1198 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1200 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1202 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1203 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1204 avoids printing a delay slot in a delay slot.
1205 * sh-opc.h (sh_table): Fully bracket last entry.
1207 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1209 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1211 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1213 * configure.in: Get host_makefile_frag from ${srcdir}.
1215 * configure.in: Autoconfiscated. Check for string[s].h. Create
1216 config.h from config.in. Don't set up sysdep.h link.
1217 * sysdep.h: New file.
1218 * configure, config.in: New files, generated from configure.in.
1219 * Makefile.in: Updated to be processed autoconf-style.
1220 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1221 (Makefile): Depend on config.status.
1222 (config.status): New rule.
1223 * configure.bat: Update Makefile substitutions.
1225 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1227 * mips-opc.c (L1): Define.
1228 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1229 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1232 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1234 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1235 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1236 have multiple add units but only a single logical unit.
1238 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1239 shifted by 18, without any insertion or extraction function.
1240 (insert_cr, extract_cr): Remove.
1243 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1245 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1248 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1250 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1253 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1255 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1256 * sh-opc.h: Add copyright.
1258 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1260 * Makefile.in (crunch-m68k): Delete extra target accidentally
1261 checked in a while ago.
1263 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1265 * sh-opc.h (sh_table): Add SH3 support.
1267 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1269 * sh-opc.h: Added bsrf and braf.
1271 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1273 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1274 bogus [ls]fm{ea,fd} patterns.
1276 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1277 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1278 initialize it from memory. Make function static.
1279 (print_insn_{big,little}_arm): New functions.
1280 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1281 the correct endianness.
1284 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1286 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1287 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1290 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1292 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1295 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1297 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1298 17th, so that it builds again using GCC as the compiler.
1300 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1302 * mips-dis.c (print_insn_little_mips): Cast return value from
1303 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1304 expects an unsigned long, and that might be fewer words of
1305 argument storage (e.g., if bfd_vma is long long on a 32-bit
1307 (print_insn_big_mips): Likewise with bfd_getb32 value.
1308 (_print_insn_mips): Now static.
1310 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1312 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1313 gcc memory hog problem with initializer is fixed.
1316 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1318 * arc-opc.c (NULL): Define.
1319 (arc_operands, insn fields u,s): Delete.
1320 (arc_operands, insn fields a,b,c): Mark as signed.
1321 (arc_opcodes): No longer const, links computed at run-time.
1322 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1323 suffixes that affect the insn code.
1324 (arc_opcodes): Resort table to macros are first.
1325 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1326 (arc_opcodes, st [b] entry): Likewise.
1327 (arc_opcodes, st [b,d] entry): Fix mask, value.
1328 (arc_reg_names): Add entries for r29, r30, r31, r60.
1329 (opcode_map, icode_map): New static globals.
1330 (arc_opcode_init_tables): Initialize them.
1331 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1332 (insert_shimmoffset): Signal error if register present.
1334 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1337 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1339 Merge in support for Mac MPW as a host.
1340 (Old change descriptions retained for informational value.)
1342 * mpw-config.in (archname): Compute from the config.
1343 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1345 * mpw-config.in (target_arch): Compute from canonical target.
1346 (m68k, mips, powerpc, sparc): Add architectures.
1347 * mpw-make.in (disassemble.c.o): Add.
1348 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1350 * mpw-config.in (BFD_MACHINES): Set to a default value.
1351 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1353 * mpw-make.in (CSEARCH): Add extra-include to search path.
1355 * mpw-config.in (varargs.h): Don't create.
1356 (sysdep.h): Create using forward-include.
1357 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1359 * mpw-config.in: New file, MPW version of configure.in.
1360 * mpw-make.in: New file, MPW version of Makefile.in.
1363 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1365 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1366 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1367 (print_insn_*): Pass bfd mach number, not opcode version.
1368 * arc-opc.c (arc_get_opcode_mach): New function.
1371 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1373 * alpha-dis.c (print_insn_alpha): Put empty statement after
1376 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1378 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1379 (low_sign_extend): Likewise.
1380 (get_field): Delete unused function.
1381 (set_field, deposit_14, deposit_21): Likewise.
1383 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1385 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1388 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1390 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1392 * alpha-opc.h (OSF_ASMCODE): define
1393 print pal-code names as defined in App C of the
1394 Alpha Architecture Reference Manual
1396 * alpha-dis.c: cleaned up output
1397 print stylized code forms as defined in App A.4.3 of the
1398 Alpha Architecture Reference Manual
1400 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1402 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1404 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1407 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1409 * m68k-dis.c (opcode): New function. Returns address of opcode
1410 table entry given index, even if the opcode table was split to
1411 work around gcc bugs.
1412 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1414 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1415 (reg_names): Now const.
1416 (print_insn_arg): Arrays cacheFieldName and names now const.
1417 (print_indexed): Array scales now const.
1420 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1422 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1423 (print_insn_arc_{host,graphics,audio}): Likewise.
1424 (print_insn): Add prototype.
1425 (arc_get_disassembler): New arg `big_p'. Return little or big
1426 print fn accordingly.
1427 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1428 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1429 (arc_opval_supported): Likewise.
1430 * disassemble.c (disassembler): Pass big endian flag to
1431 arc_get_disassembler.
1434 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1436 * ppc-opc.c: Sort recently added instructions by minor opcode
1437 number within major opcode number.
1439 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1441 * hppa-dis.c: Include libhppa.h.
1443 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1445 * mips-opc.c: Change dli to use M_DLI, and add dla.
1447 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1449 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1452 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1454 * arc-dis.c (arc_get_disassembler): Change argument to int,
1455 one of bfd_mach_arc_xxx. All callers updated.
1458 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1460 * mips-opc.c: Add r4650 mul instruction.
1462 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1464 * mips-opc.c: Add uld and usd macros for unaligned double load and
1467 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1469 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1470 mfdcr, mtdcr, icbt, iccci.
1473 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1475 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1476 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1477 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1478 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1479 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1480 (insert_absaddr): New function.
1482 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1484 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1485 New argument `cpu', pass it to arc_opcode_init_tables.
1486 Document byte order dependencies. Ignore unsupported insns.
1487 (arc_get_disassembler): New function.
1488 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1489 print_insn_arc_audio): New functions.
1490 * arc-opc.c (MULTSHIFT operand): Delete.
1491 (UNSIGNED, SATURATION): New operands.
1492 (mac, mul, mul64, mulu64): New insns.
1493 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1494 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1495 (host,graphics,audio extended and auxiliary regs): Define.
1496 (ss, sc, mh, ml): New suffixes.
1497 (arc_opcode_supported, arc_opval_supported): New functions.
1498 (insert_multshift, extract_multshift): Deleted.
1499 * disassemble.c (disassembler, case bfd_arch_arc): Call
1500 arc_get_disassembler to get disassembler routine.
1503 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1505 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1506 signed char fields to shorts, more portable.
1508 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1510 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1511 char fields as signed chars, since they may have negative values.
1513 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1515 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1516 (mycroft@netbsd.org).
1518 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1520 From "Logg, Ed" <elogg@ea.com>:
1521 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1522 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1525 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1527 * ppc-opc.c: Changes based on patch from David Edelsohn
1528 <edelsohn@mhpcc.edu>.
1529 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1532 (insert_tbr): New static function.
1533 (extract_tbr): New static function.
1534 (XFXFXM_MASK, XFXM): Define.
1535 (XSPRBAT_MASK, XSPRG_MASK): Define.
1536 (powerpc_opcodes): Add instructions to access special registers by
1537 name. Add mtcr and mftbu.
1539 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1541 * mips-opc.c (P3): Define.
1542 (mips_opcodes): Add mad and madu.
1544 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1546 * configure.in: Add W65 support.
1547 * disassemble.c: Likewise.
1548 * w65-opc.h, w65-dis.c: New files.
1550 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1552 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1556 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1558 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1560 * arc-opc.c (extract_reladdr): New function.
1561 (insert_reladdr): Store address right-shifted by 2.
1564 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1566 * mips-opc.c: Add dli as a synonym for li.
1569 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1571 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1573 (extraction fns): Insn argument now array of two words. Return pointer
1574 to value's table entry. All uses changed.
1575 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1576 (insert_multshift, extract_multshift): New fns.
1577 (arc_operands): Add support for cache bypass suffix. Add support for
1578 predefined aux regs. Modifier bits moved to flags field.
1579 (arc_opcodes): Likewise.
1580 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1581 New insn rlc. Update to syntax in programmer's manual.
1582 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1583 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1585 (arc_opcode_init_tables): New argument to indicate cpu type.
1586 (insert_reg): Handle predefined aux regs.
1587 (extract_reg): Likewise.
1588 (lookup_register): New fn.
1589 * arc-dis.c (arc_condition_codes): Deleted.
1590 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1591 Clean up modifier handling. Handle predefined aux regs.
1594 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1596 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1597 print something for reserved opcode values, even if it won't
1600 * mips-dis.c (_print_insn_mips): When initializing, shift right
1601 and mask, to avoid sign extension problems on the Alpha.
1603 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1607 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1609 * configure.in: Add ARC support.
1610 * disassemble.c: Likewise.
1611 * arc-dis.c, arc-opc.c: New files.
1614 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1616 * sh-opc.h (mov.l gbr): Get direction right.
1617 * sh-dis.c (print_insn_shx): New function.
1618 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1619 print opcodes with right byte order.
1621 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1623 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1624 to avoid conflicts with getopt.
1626 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1628 * hppa-dis.c (print_insn_hppa): Read the instruction using
1629 bfd_getb32, so that it works on a little endian or 64 bit host.
1630 Remove unused local variable op.
1632 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1634 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1635 addu does not work correctly if -mips3.
1637 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1639 * a29k-dis.c (print_special): Add special register names defined
1640 on 29030, 29040 and 29050.
1641 (print_insn): Handle new operand type 'I'.
1643 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1645 * Makefile.in (INSTALL): Use top level install.sh script.
1647 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1649 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1650 that it works on a little endian host.
1652 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1654 * configure.in: Use ${config_shell} when running config.bfd.
1656 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1658 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1660 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1662 * a29k-dis.c (print_insn): Print the opcode.
1664 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1666 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1668 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1670 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1672 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1674 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1675 which store a value into memory.
1677 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1679 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1680 * arm-dis.c, arm-opc.h: New files.
1682 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1684 * Makefile.in (ns32k-dis.o): Add dependency.
1685 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1686 string, not as array of chars.
1688 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1690 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1692 * sparc-opc.c: Added sparclite extended FP operations, and
1693 versions of v9 impdep* instructions permitting specification of
1696 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1698 * i960-dis.c (reg_names): Now const.
1699 (struct sparse_tabent): New type, copied from array type in mem
1701 (ctrl): Local static array ctrl_tab now const.
1702 (cobr): Local static array cobr_tab now const.
1703 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1704 static variable mem_tab no longer explicitly initialized. Changed
1705 mem_init to const array of struct sparse_tabent.
1706 (reg): Local static variable reg_tab no longer explicitly
1707 initialized. Changed reg_init to const array of struct
1709 (ea): Local static array scale_tab now const.
1711 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1714 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1716 * configure.bat: the disassember needs to be enabled for
1717 "objdump -d" to work in djgpp.
1719 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1721 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1722 (invalid_float): Enabled general version, doesn't require running
1723 on ns32k host. Changed to take char* argument, and test for
1724 explicitly specified sizes, instead of using sizeof() on host CPU
1726 (INVALID_FLOAT): Cast first argument.
1727 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1728 list_P032, list_M032): Now const.
1729 (optlist, list_search): Made appropriate arguments now point to
1731 (print_insn_arg): Changed static array of one-character-string
1732 pointers into a static const array of characters; fixed sprintf
1733 statement accordingly.
1735 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1737 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1738 from distribution. A ns32k-dis.c from a previous distribution has
1739 been brought up to date and supports the new interface.
1741 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1743 * configure.in: add bfd_ns32k_arch target support.
1745 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1746 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1748 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1750 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1753 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1755 * h8300-dis.c, mips-dis.c: Don't use true and false.
1757 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1759 * configure.in: Change --with-targets to --enable-targets.
1761 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1763 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1764 opcodes to the first instruction with that opcode, to speed
1765 disassembly of large files. From ralphc@pyramid.com (Ralph
1768 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1770 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1772 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1774 * configure.bat: update to latest makefile.in
1776 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1778 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1779 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1780 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1781 slot insn is in a delay slot.
1782 * z8k-opc.h: (resflg): Fix patterns.
1783 * h8500-opc.h Fix CR insn patterns.
1785 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1787 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1788 "cmpl" before POWER versions, so that gas -many uses them.
1790 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1792 * disassemble.c: New file.
1793 * Makefile.in (OFILES): Add disassemble.o.
1794 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1795 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1796 binutils/configure.in.
1798 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1799 opcode being examined.
1801 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1803 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1804 (insert_ral, insert_ram, insert_ras): New functions.
1805 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1806 RAS for store with update.
1808 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1810 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1811 (edelsohn@npac.syr.edu).
1813 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1815 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1818 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1820 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1822 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1824 * ppc-opc.c (powerpc_operands): The signedp field has been
1825 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1826 instead. Add new operand SISIGNOPT.
1827 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1828 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1829 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1832 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1834 * i386-dis.c (struct private): Renamed to dis_private. `private'
1835 is a reserved word for dynix cc.
1837 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1839 * configure.in: Change error message to refer to bfd/config.bfd
1840 rather than bfd/configure.in.
1842 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1844 * ppc-opc.c: Define POWER2 as short alias flag.
1845 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1848 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1850 * i960-dis.c (print_insn_i960): Don't read a second word for
1851 opcodes 0, 1, 2 and 3.
1853 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1855 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1857 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1859 * m68881-ext.c: Removed; no longer used.
1860 * Makefile.in: Changed accordingly.
1862 * m68k-dis.c (ext_format_68881): Don't declare.
1863 (print_insn_m68k): If an instruction uses place 'i', it uses at
1864 least four fixed bytes.
1865 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1866 extended float, convert to double using floatformat_to_double, not
1867 ieee_extended_to_double, and fetch the data before converting it.
1869 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1871 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1872 davidj@ICSI.Berkeley.EDU (David Johnson).
1874 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1876 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1877 PowerPC uses bdnz[l][a].
1879 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1881 * dis-buf.c, i386-dis.c: Include sysdep.h.
1883 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1885 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1887 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1888 by Motorola PowerPC 601 with PPC_OPCODE_601.
1889 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1890 Disassemble Motorola PowerPC 601 instructions as well as normal
1891 PowerPC instructions.
1893 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1895 * i960-dis.c (reg, mem): Just use a static array instead of
1898 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1900 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1901 condition name index if this is for a negated condition.
1903 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1904 Floating point format for 'H' operand is backwards from normal
1905 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1906 operands (fmpyadd and fmpysub), handle bizarre register
1907 translation correctly for single precision format.
1909 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1910 or 'I' operands if the next format specifier is 'M' (fcmp
1911 condition completer).
1913 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1915 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1916 single number giving a bitmask for the MB and ME fields of an M
1917 form instruction. Change NB to accept 32, and turn it into 0;
1918 also turn 0 into 32 when disassembling. Seperated SH from NB.
1919 (insert_mbe, extract_mbe): New functions.
1920 (insert_nb, extract_nb): New functions.
1921 (SC_MASK): Mask out SA and LK bits.
1922 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1923 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1924 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1925 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1926 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1927 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1928 (powerpc_macros): Define table of macro definitions.
1929 (powerpc_num_macros): Define.
1931 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1932 if PPC_OPERAND_NEXT is set.
1934 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1936 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1937 char. Retrieve contents using bfd_getl32 instead of shifting.
1939 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1941 * ppc-opc.c: New file. Opcode table for PowerPC, including
1942 opcodes for POWER (RS/6000).
1943 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1944 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1945 (CFILES): Add ppc-dis.c.
1946 (ppc-dis.o, ppc-opc.o): New targets.
1947 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1949 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1951 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1952 No space before 'u', 'f', or 'N'.
1954 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1956 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1957 farther than we should.
1959 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1961 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1963 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1965 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1967 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1968 needs it, to prevent reading past the end of a section.
1970 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1972 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1973 Removed t,A case for la; always use t,A(b) case.
1975 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1977 From Ted Lemen <mellon@pepper.ncd.com>
1978 * mips-dis.c (print_insn_arg): Handle 'k'.
1979 * mips-opc.c: Make cache use k, not t.
1981 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1983 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1984 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1985 FLOAT_FORMAT_CODE to put out floating point register names.
1987 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1989 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1991 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1993 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1995 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1997 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1998 larger than 32. Moved dsxx32 variants first for disassembler.
2000 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2002 * z8kgen.c, z8k-opc.h: Add full lda information.
2004 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2006 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2007 movb instructions. Any necessary space will be emitted by
2008 the code to handle nullification completers.
2010 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2012 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2014 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2016 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2017 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2019 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2021 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2023 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2025 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2026 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2028 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2030 * m88k-dis.c (m88kdis): comment change. Remove space after
2032 (printop): handle new arg types DEC and XREG for m88110.
2034 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2036 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2037 type for absolute branch addresses. Delete special
2038 "ble" and "be" code in 'W' operand code.
2040 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2042 * mips-opc.c: Set hazard information correctly for branch
2043 likely instructions.
2045 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2047 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2048 info->fprintf_func for printing and info->print_address_func for
2051 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2053 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2055 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2057 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2058 Corrected second case of "b" for disassembler.
2060 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2062 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2063 to BFD swapping routines to correspond to BFD name changes.
2065 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2067 * mips-opc.c: Change div machine instruction to be z,s,t rather
2068 than s,t. Change div macro to be d,v,t rather than d,s,t.
2069 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2070 rem and remu which generates only the corresponding div
2071 instruction. This is for compatibility with the MIPS assembler,
2072 which only generates the simple machine instruction when an
2073 explicit destination of $0 is used.
2074 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2076 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2078 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2079 WR_31 hazard for bal, bgezal, bltzal.
2081 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2083 * hppa-dis.c (print_insn_hppa): Use print function
2084 from within the disassemble_info, not fprintf_filtered.
2086 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2088 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2089 Law, law@cs.utah.edu.)
2091 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2093 * mips-opc.c ("absu"): Removed.
2096 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2098 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2099 Changed hazard information to distinguish between memory load
2100 delays and coprocessor load delays.
2102 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2104 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2106 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2108 * configure.in: Don't pass cpu to config.bfd.
2110 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2112 * m88k-dis.c (m88kdis): Make class unsigned.
2114 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2116 * alpha-dis.c (print_insn_alpha): One branch format case was
2117 missing the instruction name.
2119 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2121 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2122 Add the arch-specific auxiliary files.
2123 (OFILES): Remove the arch-specific auxiliary files
2124 and use BFD_MACHINES instead of DIS_LIBS.
2125 * configure.in: Set BFD_MACHINES based on --with-targets option.
2127 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2129 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2132 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2134 * sparc-opc.c: Change CONST to const to deal with gcc
2135 -Dconst=__const -traditional.
2137 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2139 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2140 coprocessor instructions out of #if 0, and made them use new
2143 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2145 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2147 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2149 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2150 instruction, for use by the disassembler.
2152 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2153 hand-coded sign extensions that depended on 32-bit host ints.
2154 FIXME, we still depend on big-endian host bitfield ordering.
2155 (sparc_print_insn): Set the insn_info_valid field, and the
2156 other fields that describe the instruction being printed.
2158 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2160 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2161 `jmp' instead of just one of them.
2163 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2165 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2166 (fput_fp_reg_r): Renamed from fput_reg_r.
2167 (fput_fp_reg): New function.
2168 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2170 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2172 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2174 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2176 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2178 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2179 don't output a space.
2181 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2183 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2185 * mips-opc.c: New file, containing opcode table from
2186 ../include/opcode/mips.h.
2187 * Makefile.in: Add it.
2189 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2191 * m88k-dis.c: New file, moved in from gdb and changed to use the
2192 new dis-asm.h disassembler interface.
2193 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2194 (m88k-dis.o): New target.
2196 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2198 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2199 argument string const char * to correspond to opcode/mips.h.
2201 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2203 * mips-dis.c: Updated to account for name changes in new version
2205 * Makefile.in: Added header file dependencies.
2207 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2209 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2211 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2213 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2214 extend, rather than shifts.
2216 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2218 * Makefile.in: Undo 15 June change.
2220 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2222 * m68k-dis.c (print_insn_arg): Change return value to byte count
2224 * m68k-dis.c: Re-write to detect invalid operands before
2225 printing anything, so we can handle this the same way we
2226 handle invalid opcodes.
2228 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2230 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2232 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2234 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2237 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2239 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2241 * configure.in: Do make sysdep.h link.
2242 * Makefile.in: Search ../include. Don't search ../bfd.
2244 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2246 Changes from Jeff Law, law@cs.utah.edu:
2247 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2248 Do not print a space before the completers specified by
2251 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2253 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2254 defined, since gdb has been fixed.
2256 Changes from Jeff Law, law@cs.utah.edu:
2257 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2258 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2259 be a *disassemble_info, not a *FILE.
2260 * hppa-dis.c: Support 'd', '!', and 'a'.
2261 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2262 * hppa-dis.c: Delete cases which are no longer needed.
2264 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2266 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2268 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2270 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2273 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2275 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2276 * configure.in: No longer need to configure to get sysdep.h.
2278 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2280 * Patches from Jeffrey Law <law@cs.utah.edu>.
2281 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2282 templates for 1.1 FP computational instructions.
2284 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2286 * h8500-dis.c (print_insn_h8500): Address argument is type
2288 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2291 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2292 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2294 * sparc-dis.c (compare_opcodes): Move static declaration to
2297 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2299 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2300 instruction, remove unimp hack from 'l' argument.
2302 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2304 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2307 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2309 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2310 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2313 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2315 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2316 arrays of string pointers to 2-d arrays of chars, to save
2319 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2321 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2322 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2324 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2326 * hppa-dis.c: New file from Utah, adapted to new disassembler
2328 * Makefile.in: Include it.
2330 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2332 * sh-dis.c, sh-opc.h: New files.
2334 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2336 * alpha-dis.c, alpha-opc.h: New files.
2338 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2340 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2343 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2345 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2347 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2349 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2352 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2354 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2355 and double percent signs a few places.
2357 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2359 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2360 Use info->print_address_func not print_address.
2362 * dis-buf.c (generic_print_address): New function.
2364 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2366 * Makefile.in: Add sparc-dis.c.
2367 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2369 Add `add' instruction to the set that get checked
2370 for a preceding `sethi' in order to print an absolute address.
2371 * (print_insn): Disassembly prefers real instructions.
2372 (is_delayed_branch): Speed up.
2373 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2374 Still missing some float ops, and needs testing.
2375 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2376 F_ALIAS. Use printf, not fprintf, when not passing a file
2378 (compare_opcodes): Check that identical instructions have
2379 identical opcodes, complain otherwise.
2382 * Include reg_names.
2384 Use dis-asm.h/read_memory_func interface.
2386 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2388 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2389 deliberately return non-zero to setjmp from longjmp. Otherwise
2390 this code fails to compile.
2392 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2394 * m68k-dis.c: Fix prototype for fetch_arg().
2396 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2398 * dis-buf.c: New file, for new read_memory_func interface.
2399 Makefile.in (OFILES): Include it.
2400 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2401 Use new read_memory_func interface.
2403 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2405 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2406 * h8500-opc.h: Fix couple of opcodes.
2408 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2410 * Makefile.in: add dvi & installcheck targets
2412 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2414 * Makefile.in: Update for h8500-dis.c.
2416 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2418 * h8500-dis.c, h8500-opc.h: New files
2420 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2422 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2423 ../include/dis-asm.h.
2424 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2425 and ../gdb/m68k-pinsn.c).
2426 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2427 and ../gdb/i386-pinsn.c).
2428 * m68881-ext.c: New file. Moved definition of
2429 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2430 * Makefile.in: Adjust for new files.
2431 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2432 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2433 can be dis-assembled.
2435 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2437 * mips-dis.c (print_insn_arg): Now returns void.
2439 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2441 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2442 files that use the macros.
2444 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2446 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2447 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2448 (CFILES): Added mips-dis.c.
2450 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2452 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2453 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2455 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2457 * Makefile.in: Improve *clean rules.
2458 * configure.in: Allow a default host.
2460 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2462 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2463 files include other sysdep files
2465 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2467 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2469 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2471 * configure.in: For host support, use ../bfd/configure.host
2472 so it stays in sync with the ../bfd/hosts database.
2474 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2476 * configure.in: use cpu-vendor-os triple instead of nested cases
2478 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2480 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2481 *always* the wrong one.
2483 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2485 * z8kgen.c: added copyright info
2487 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2489 * z8k-dis.c (unparse_instr): prettier tabs
2490 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2492 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2494 * configure.in: Add ncr* configuration.
2495 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2496 picayune ANSI compilers happy.
2498 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2500 * configure.in (i386): Make i386 and i486 synonymous for now.
2501 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2503 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2505 * Makefile.in (install): Fix typo.
2507 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2509 * Makefile.in (make): Remove obsolete crud.
2510 (sparc-opc.o): Avoid Sun Make VPATH bug.
2512 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2514 * Makefile.in: since there are no SUBDIRS, remove rule and
2515 references of subdir_do.
2517 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2519 * Makefile.in (install): Get the library name right here too.
2520 Don't install bfd.h, since it's unrelated to this library. No
2521 subdirs to recurse into, either.
2522 (CFILES): The source file has a .c suffix, not .o.
2524 * sparc-opc.c: New file, moved from BFD.
2525 * Makefile.in (OFILES): Build it.
2527 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2529 * z8k-dis.c: fixed forward refferences of some declarations.
2531 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2533 * Makefile.in: get the name of the library right
2535 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2537 * z8k-dis.c: knows how to disassemble z8k stuff
2538 * z8k-opc.h: new file full of z8000 opcodes
2542 version-control: never
projects / deliverable / binutils-gdb.git / blob