opcodes/ChangeLog

   1 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
   2
   3         * disassemble.c (disassembler): Use new bfd_big_endian macro.
   4
   5 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
   6
   7         * Makefile.in (distclean): Remove stamp-h.  From Ronald
   8         F. Guilmette <rfg@monkeys.com>.
   9
  10 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
  11
  12         From David Mosberger-Tang  <davidm@azstarnet.com>:
  13         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
  14         instruction.
  15
  16 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
  17
  18         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
  19         (sh_table): Added many SH3 opcodes.
  20         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
  21
  22 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
  23
  24         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
  25         (subco,subco.): Mark this PPC, not PPCCOM.
  26
  27 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
  28
  29         * configure: Rebuild with autoconf 2.7.
  30
  31 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
  32
  33         * configure: Rebuild with autoconf 2.6.
  34
  35 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
  36
  37         * configure.in: Sort list of architectures.  Accept but do nothing
  38         for alliant, convex, pyramid, romp, and tahoe.
  39
  40 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
  41
  42         * a29k-dis.c (print_special): Change num to unsigned int.
  43
  44 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
  45
  46         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
  47         shifting it.
  48
  49 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
  50
  51         * configure.in: Call AC_CHECK_PROG to find and cache AR.
  52         * configure: Rebuilt.
  53
  54 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
  55
  56         * configure.in: Add case for bfd_i860_arch.
  57         * configure: Rebuild.
  58
  59 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
  60
  61         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
  62         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
  63         (NEXTDOUBLE): Likewise.
  64         (print_insn_m68k): Don't match fmoveml if there is more than one
  65         register in the list.
  66         (print_insn_arg): Handle a place of '8' for a type of 'L'.
  67
  68 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
  69
  70         * m68k-opc.c: Use #W rather than #w.
  71         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
  72
  73 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
  74
  75         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
  76         and likewise for all the dbxx opcodes.
  77
  78 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
  79
  80         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
  81
  82 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
  83
  84         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
  85         the VR4100 specific instructions to the mips_opcodes structure.
  86
  87 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
  88
  89         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
  90         ugly Metrowerks bug in CW6, is fixed in CW7.
  91
  92 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
  93
  94         * ppc-opc.c (whole file): Add flags for common/any support.
  95
  96 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
  97
  98         * Makefile.in (BISON): Remove macro.
  99         (FLAGS_TO_PASS): Remove BISON.
 100
 101 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
 102
 103         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 104
 105         * m68k-dis.c (print_insn_m68k): Recognize all two-word
 106         instructions that take no args by looking at the match mask.
 107         (print_insn_arg): Always print "%" before register names.
 108         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
 109         [case '_']: Don't print "@#" before address.
 110         [case 'J']: Use "%s" as format string, not register name.
 111         [case 'B']: Treat place == 'C' like 'l' and 'L'.
 112
 113 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
 114
 115         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
 116         name correctly.
 117
 118 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
 119
 120         From David Mosberger-Tang  <davidm@azstarnet.com>
 121
 122         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
 123         (alpha_insn_set): added definitions for VAX floating point
 124         instructions (Unix compilers don't generate these, but handcoded
 125         assembly might still use them).
 126
 127         * alpha-dis.c (print_insn_alpha): added support for disassembling
 128         the miscellaneous instructions in the Alpha instruction set.
 129
 130 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
 131
 132         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
 133         no longer create sysdep.h, sed ppc-opc.c to work around a
 134         serious Metrowerks C bug.
 135         * mpw-make.in: Remove.
 136         * mpw-make.sed: New file, used by mpw-configure to edit
 137         Makefile.in into an MPW makefile.
 138
 139 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
 140
 141         * Makefile.in (maintainer-clean): New synonym for realclean.
 142
 143 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 144
 145         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
 146         which use '0', '1', and '2' instead.  Specify the proper size for
 147         a pmove immediate operand.  Correct the pmovefd patterns to be
 148         moves to a register, not from a register.
 149         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
 150
 151 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
 152
 153         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
 154         %psr, %wim, %tbr as F_NOTV9.
 155
 156 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
 157
 158         * Makefile.in (Makefile): Just rebuild Makefile when running
 159         config.status.
 160         (config.h, stamp-h): New targets.
 161         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
 162         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
 163         rebuilding config.h.
 164         * configure: Rebuild.
 165
 166         * mips-opc.c: Change unaligned loads and stores with "t,A"
 167         operands to use "t,A(b)".
 168
 169 start-sanitize-sh3e
 170 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 171
 172         * sh-dis.c (print_insn_shx): Add F_FR0 support.
 173
 174 end-sanitize-sh3e
 175 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 176
 177         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
 178         until 3 instead of until 2.
 179
 180 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 181
 182         * Makefile.in (ALL_CFLAGS): Define.
 183         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
 184         (MOSTLYCLEAN): Add config.log.
 185         (distclean): Don't remove config.log.
 186         * configure.in: Substitute HDEFINES.
 187         * configure: Rebuild.
 188
 189 start-sanitize-sh3e
 190 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 191
 192         * sh-opc.h (sh_arg_type): Add F_FR0.
 193         (sh_table, case fmac): Add F_FR0 as first argument.
 194
 195 end-sanitize-sh3e
 196 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 197
 198         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
 199
 200 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
 201
 202         * sparc-dis.c: Remove all references to NO_V9.
 203
 204 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
 205
 206         * aclocal.m4: Just include ../bfd/aclocal.m4.
 207         * configure: Rebuild.
 208
 209 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
 210
 211         * sparc-dis.c (X_DISP19): Define.
 212         (print_insn, case 'G'): Use it.
 213         (print_insn, case 'L'): Sign extend displacement.
 214
 215 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
 216
 217         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
 218         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
 219         host_makefile_frag or frags.
 220         * aclocal.m4: New file.
 221         * configure: Rebuild.
 222         * Makefile.in (INSTALL): Set to @INSTALL@.
 223         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
 224         (INSTALL_DATA): Set to @INSTALL_DATA@.
 225         (AR): Set to @AR@.
 226         (AR_FLAGS): Set to rc rather than qc.
 227         (CC): Define as @CC@.
 228         (CFLAGS): Set to @CFLAGS@.
 229         (@host_makefile_frag@): Remove.
 230         (config.status): Remove dependency upon @frags@.
 231
 232         * configure.in: ../bfd/config.bfd now just sets shell variables.
 233         Use them rather than looking through target Makefile fragments.
 234         * configure: Rebuild.
 235
 236 start-sanitize-sh3e
 237 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 238
 239         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
 240
 241 end-sanitize-sh3e
 242 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
 243
 244         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
 245         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
 246         sparc64 insns.
 247
 248         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
 249         (lookup_{name,value}): New functions.
 250         (prefetch_table): New static local.
 251         (sparc_{encode,decode}_prefetch): New functions.
 252         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
 253
 254 start-sanitize-sh3e
 255 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 256
 257         * sh-opc.h: Add blank lines to improve readabililty of sh3e
 258         instructions.
 259
 260 end-sanitize-sh3e
 261 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 262
 263         * sh-dis.c: Correct comment on first line of file.
 264
 265 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
 266
 267         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
 268
 269         * sparc-opc.c (asi, membar): New static locals.
 270         (sparc_{encode,decode}_{asi,membar}): New functions.
 271         (sparc_opcodes, membar insn): Fix.
 272         * sparc-dis.c (print_insn): Call sparc_decode_asi.
 273         Support decoding of membar masks.
 274         (X_MEMBAR): Define.
 275
 276 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
 277
 278         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
 279
 280 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 281
 282         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
 283         and likewise for the other branches.  Add bhs as an alias for bcc,
 284         and likewise for the size variants.  Add dbhs as an alias for
 285         dbcc.
 286
 287 start-sanitize-sh3e
 288 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 289
 290         * sh-opc.h (FP sts instructions): Update to match reality.
 291
 292 end-sanitize-sh3e
 293 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 294
 295         * m68k-dis.c: (fpcr_names): Add % before all register names.
 296         (reg_names): Likewise.
 297         (print_insn_arg): Don't explicitly print % before register names.
 298         Add % before register names in static array names.  In case 'r',
 299         print data registers as `@(Dn)', not `Dn@'.  When printing a
 300         memory address, don't print @# before it.
 301         (print_indexed): Change base_disp and outer_disp from int to
 302         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 303         syntax.  Sign extend 8 byte displacement correctly.
 304         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 305         Change parameter disp from int to bfd_vma.
 306
 307         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 308         for jsr.
 309
 310 start-sanitize-sh3e
 311 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 312
 313         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 314         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 315         * sh-opc.h (sh_arg_type): Add new operand types.
 316         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 317
 318 end-sanitize-sh3e
 319 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 320
 321         * Makefile.in (distclean): Remove generated file config.h.
 322
 323 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 324
 325         * Makefile.in (distclean): Remove generated file config.h.
 326
 327 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 328
 329         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 330         Clean up tables.
 331         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 332         (opcode): Remove.
 333         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 334         rather than numopcodes.  Use m68k_opcodes rather than removed
 335         opcode function.  Don't check F_ALIAS.
 336         (print_insn_arg): Change first parameter to be const char *.
 337         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 338         (m68k-opc.o): New target.
 339         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 340         * configure: Rebuild.
 341
 342 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 343
 344         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 345         (opcode_bits, opcode_hash_table): New variables.
 346         (opcodes_initialized): Renamed from opcodes_sorted.
 347         (build_hash_table): New function.
 348         (is_delayed_branch): Use hash table.
 349         (print_insn): Renamed from print_insn_sparc, made static.
 350         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 351         and vice-versa if sparc64.
 352         (print_insn_sparc, print_insn_sparc64): New functions.
 353         (compare_opcodes): Move sparc64 opcodes to end.
 354         Print commutative insns with constant second.
 355         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 356
 357 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 358
 359         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 360         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 361         avoids printing a delay slot in a delay slot.
 362         * sh-opc.h (sh_table): Fully bracket last entry.
 363
 364 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 365
 366         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 367
 368 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 369
 370         * configure.in: Get host_makefile_frag from ${srcdir}.
 371
 372         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 373         config.h from config.in.  Don't set up sysdep.h link.
 374         * sysdep.h: New file.
 375         * configure, config.in: New files, generated from configure.in.
 376         * Makefile.in: Updated to be processed autoconf-style.
 377         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 378         (Makefile): Depend on config.status.
 379         (config.status): New rule.
 380         * configure.bat: Update Makefile substitutions.
 381
 382 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 383
 384         * mips-opc.c (L1): Define.
 385         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 386         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 387         and wb.
 388
 389 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 390
 391         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 392         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 393         have multiple add units but only a single logical unit.
 394
 395         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 396         shifted by 18, without any insertion or extraction function.
 397         (insert_cr, extract_cr): Remove.
 398
 399 start-sanitize-arc
 400 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 401
 402         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 403
 404 end-sanitize-arc
 405 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 406
 407         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 408         register names.
 409
 410 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 411
 412         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 413         * sh-opc.h: Add copyright.
 414
 415 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 416
 417         * Makefile.in (crunch-m68k): Delete extra target accidentally
 418         checked in a while ago.
 419
 420 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 421
 422         * sh-opc.h (sh_table): Add SH3 support.
 423
 424 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 425
 426         * sh-opc.h: Added bsrf and braf.
 427
 428 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 429
 430         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 431         bogus [ls]fm{ea,fd} patterns.
 432
 433         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 434         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 435         initialize it from memory.  Make function static.
 436         (print_insn_{big,little}_arm): New functions.
 437         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 438         the correct endianness.
 439
 440 start-sanitize-arc
 441 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 442
 443         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 444         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 445 end-sanitize-arc
 446
 447 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 448
 449         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 450         enum list.
 451
 452 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 453
 454         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 455         17th, so that it builds again using GCC as the compiler.
 456
 457 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 458
 459         * mips-dis.c (print_insn_little_mips): Cast return value from
 460         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 461         expects an unsigned long, and that might be fewer words of
 462         argument storage (e.g., if bfd_vma is long long on a 32-bit
 463         machine).
 464         (print_insn_big_mips): Likewise with bfd_getb32 value.
 465         (_print_insn_mips): Now static.
 466
 467 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 468
 469         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 470         gcc memory hog problem with initializer is fixed.
 471
 472 start-sanitize-arc
 473 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 474
 475         * arc-opc.c (NULL): Define.
 476         (arc_operands, insn fields u,s): Delete.
 477         (arc_operands, insn fields a,b,c): Mark as signed.
 478         (arc_opcodes): No longer const, links computed at run-time.
 479         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 480         suffixes that affect the insn code.
 481         (arc_opcodes): Resort table to macros are first.
 482         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 483         (arc_opcodes, st [b] entry): Likewise.
 484         (arc_opcodes, st [b,d] entry): Fix mask, value.
 485         (arc_reg_names): Add entries for r29, r30, r31, r60.
 486         (opcode_map, icode_map): New static globals.
 487         (arc_opcode_init_tables): Initialize them.
 488         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 489         (insert_shimmoffset): Signal error if register present.
 490         Validate constant.
 491         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 492 end-sanitize-arc
 493
 494 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 495
 496         Merge in support for Mac MPW as a host.
 497         (Old change descriptions retained for informational value.)
 498
 499         * mpw-config.in (archname): Compute from the config.
 500         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 501
 502         * mpw-config.in (target_arch): Compute from canonical target.
 503         (m68k, mips, powerpc, sparc): Add architectures.
 504         * mpw-make.in (disassemble.c.o): Add.
 505         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 506
 507         * mpw-config.in (BFD_MACHINES): Set to a default value.
 508         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 509
 510         * mpw-make.in (CSEARCH): Add extra-include to search path.
 511
 512         * mpw-config.in (varargs.h): Don't create.
 513         (sysdep.h): Create using forward-include.
 514         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 515
 516         * mpw-config.in: New file, MPW version of configure.in.
 517         * mpw-make.in: New file, MPW version of Makefile.in.
 518
 519 start-sanitize-arc
 520 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 521
 522         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 523         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 524         (print_insn_*): Pass bfd mach number, not opcode version.
 525         * arc-opc.c (arc_get_opcode_mach): New function.
 526 end-sanitize-arc
 527
 528 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 529
 530         * alpha-dis.c (print_insn_alpha): Put empty statement after
 531         default label.
 532
 533 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 534
 535         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 536         (low_sign_extend): Likewise.
 537         (get_field): Delete unused function.
 538         (set_field, deposit_14, deposit_21): Likewise.
 539
 540 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 541
 542         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 543           (guy@netapp.com).
 544
 545 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 546
 547         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 548
 549         * alpha-opc.h (OSF_ASMCODE): define
 550         print pal-code names as defined in App C of the
 551         Alpha Architecture Reference Manual
 552
 553         * alpha-dis.c: cleaned up output
 554         print stylized code forms as defined in App A.4.3 of the
 555         Alpha Architecture Reference Manual
 556
 557 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 558
 559         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 560         `rfe'.
 561         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 562         'N', and 'M'.
 563
 564 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 565
 566         * m68k-dis.c (opcode): New function.  Returns address of opcode
 567         table entry given index, even if the opcode table was split to
 568         work around gcc bugs.
 569         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 570         directly.
 571         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 572         (reg_names): Now const.
 573         (print_insn_arg): Arrays cacheFieldName and names now const.
 574         (print_indexed): Array scales now const.
 575
 576 start-sanitize-arc
 577 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 578
 579         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 580         (print_insn_arc_{host,graphics,audio}): Likewise.
 581         (print_insn): Add prototype.
 582         (arc_get_disassembler): New arg `big_p'.  Return little or big
 583         print fn accordingly.
 584         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 585         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 586         (arc_opval_supported): Likewise.
 587         * disassemble.c (disassembler): Pass big endian flag to
 588         arc_get_disassembler.
 589 end-sanitize-arc
 590
 591 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 592
 593         * ppc-opc.c: Sort recently added instructions by minor opcode
 594         number within major opcode number.
 595
 596 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 597
 598         * hppa-dis.c: Include libhppa.h.
 599
 600 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 601
 602         * mips-opc.c: Change dli to use M_DLI, and add dla.
 603
 604 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 605
 606         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 607
 608 start-sanitize-arc
 609 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 610
 611         * arc-dis.c (arc_get_disassembler): Change argument to int,
 612         one of bfd_mach_arc_xxx.  All callers updated.
 613 end-sanitize-arc
 614
 615 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 616
 617         * mips-opc.c: Add r4650 mul instruction.
 618
 619 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 620
 621         * mips-opc.c: Add uld and usd macros for unaligned double load and
 622         store.
 623
 624 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 625
 626         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 627         mfdcr, mtdcr, icbt, iccci.
 628
 629 start-sanitize-arc
 630 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 631
 632         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 633         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 634         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 635         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 636         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 637         (insert_absaddr): New function.
 638
 639 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 640
 641         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 642         New argument `cpu', pass it to arc_opcode_init_tables.
 643         Document byte order dependencies.  Ignore unsupported insns.
 644         (arc_get_disassembler): New function.
 645         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 646         print_insn_arc_audio): New functions.
 647         * arc-opc.c (MULTSHIFT operand): Delete.
 648         (UNSIGNED, SATURATION): New operands.
 649         (mac, mul, mul64, mulu64): New insns.
 650         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 651         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 652         (host,graphics,audio extended and auxiliary regs): Define.
 653         (ss, sc, mh, ml): New suffixes.
 654         (arc_opcode_supported, arc_opval_supported): New functions.
 655         (insert_multshift, extract_multshift): Deleted.
 656         * disassemble.c (disassembler, case bfd_arch_arc): Call
 657         arc_get_disassembler to get disassembler routine.
 658 end-sanitize-arc
 659
 660 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 661
 662         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 663         signed char fields to shorts, more portable.
 664
 665 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 666
 667         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 668         char fields as signed chars, since they may have negative values.
 669
 670 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 671
 672         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 673           (mycroft@netbsd.org).
 674
 675 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 676
 677         From "Logg, Ed" <elogg@ea.com>:
 678         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 679         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 680         value.
 681
 682 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 683
 684         * ppc-opc.c: Changes based on patch from David Edelsohn
 685         <edelsohn@mhpcc.edu>.
 686         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 687         SPR.
 688         (FXM_MASK): Define.
 689         (insert_tbr): New static function.
 690         (extract_tbr): New static function.
 691         (XFXFXM_MASK, XFXM): Define.
 692         (XSPRBAT_MASK, XSPRG_MASK): Define.
 693         (powerpc_opcodes): Add instructions to access special registers by
 694         name.  Add mtcr and mftbu.
 695
 696 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 697
 698         * mips-opc.c (P3): Define.
 699         (mips_opcodes): Add mad and madu.
 700
 701 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 702
 703         * configure.in: Add W65 support.
 704         * disassemble.c: Likewise.
 705         * w65-opc.h, w65-dis.c: New files.
 706
 707 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 708
 709         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 710         immediates.
 711
 712 start-sanitize-arc
 713 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 714
 715         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 716         slot.
 717         * arc-opc.c (extract_reladdr): New function.
 718         (insert_reladdr): Store address right-shifted by 2.
 719 end-sanitize-arc
 720
 721 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 722
 723         * mips-opc.c: Add dli as a synonym for li.
 724
 725 start-sanitize-arc
 726 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 727
 728         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 729         All uses changed.
 730         (extraction fns): Insn argument now array of two words.  Return pointer
 731         to value's table entry.  All uses changed.
 732         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 733         (insert_multshift, extract_multshift): New fns.
 734         (arc_operands): Add support for cache bypass suffix.  Add support for
 735         predefined aux regs.  Modifier bits moved to flags field.
 736         (arc_opcodes): Likewise.
 737         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 738         New insn rlc.  Update to syntax in programmer's manual.
 739         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 740         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 741         bypass.
 742         (arc_opcode_init_tables): New argument to indicate cpu type.
 743         (insert_reg): Handle predefined aux regs.
 744         (extract_reg): Likewise.
 745         (lookup_register): New fn.
 746         * arc-dis.c (arc_condition_codes): Deleted.
 747         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 748         Clean up modifier handling.  Handle predefined aux regs.
 749 end-sanitize-arc
 750
 751 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 752
 753         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 754         print something for reserved opcode values, even if it won't
 755         assemble again.
 756
 757         * mips-dis.c (_print_insn_mips): When initializing, shift right
 758         and mask, to avoid sign extension problems on the Alpha.
 759
 760         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 761         control registers.
 762
 763 start-sanitize-arc
 764 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 765
 766         * configure.in: Add ARC support.
 767         * disassemble.c: Likewise.
 768         * arc-dis.c, arc-opc.c: New files.
 769 end-sanitize-arc
 770
 771 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 772
 773         * sh-opc.h (mov.l gbr): Get direction right.
 774         * sh-dis.c (print_insn_shx): New function.
 775         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 776         print opcodes with right byte order.
 777
 778 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 779
 780         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 781         to avoid conflicts with getopt.
 782
 783 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 784
 785         * hppa-dis.c (print_insn_hppa): Read the instruction using
 786         bfd_getb32, so that it works on a little endian or 64 bit host.
 787         Remove unused local variable op.
 788
 789 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 790
 791         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 792         addu does not work correctly if -mips3.
 793
 794 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 795
 796         * a29k-dis.c (print_special): Add special register names defined
 797         on 29030, 29040 and 29050.
 798         (print_insn): Handle new operand type 'I'.
 799
 800 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 801
 802         * Makefile.in (INSTALL): Use top level install.sh script.
 803
 804 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 805
 806         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 807         that it works on a little endian host.
 808
 809 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 810
 811         * configure.in: Use ${config_shell} when running config.bfd.
 812
 813 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 814
 815         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 816
 817 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 818
 819         * a29k-dis.c (print_insn): Print the opcode.
 820
 821 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 822
 823         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 824
 825 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 826
 827         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 828
 829 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 830
 831         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 832         which store a value into memory.
 833
 834 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 835
 836         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 837         * arm-dis.c, arm-opc.h: New files.
 838
 839 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 840
 841         * Makefile.in (ns32k-dis.o): Add dependency.
 842         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 843         string, not as array of chars.
 844
 845 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 846
 847         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 848
 849         * sparc-opc.c: Added sparclite extended FP operations, and
 850         versions of v9 impdep* instructions permitting specification of
 851         the OPF field.
 852
 853 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 854
 855         * i960-dis.c (reg_names): Now const.
 856         (struct sparse_tabent): New type, copied from array type in mem
 857         function.
 858         (ctrl): Local static array ctrl_tab now const.
 859         (cobr): Local static array cobr_tab now const.
 860         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 861         static variable mem_tab no longer explicitly initialized.  Changed
 862         mem_init to const array of struct sparse_tabent.
 863         (reg): Local static variable reg_tab no longer explicitly
 864         initialized.  Changed reg_init to const array of struct
 865         sparse_tabent.
 866         (ea): Local static array scale_tab now const.
 867
 868         start-sanitize-i960xl
 869         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
 870         (REG_MAX): Updated.
 871         end-sanitize-i960xl
 872
 873 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
 874
 875         * configure.bat: the disassember needs to be enabled for
 876         "objdump -d" to work in djgpp.
 877
 878 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 879
 880         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
 881         (invalid_float): Enabled general version, doesn't require running
 882         on ns32k host.  Changed to take char* argument, and test for
 883         explicitly specified sizes, instead of using sizeof() on host CPU
 884         types.
 885         (INVALID_FLOAT): Cast first argument.
 886         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
 887         list_P032, list_M032): Now const.
 888         (optlist, list_search): Made appropriate arguments now point to
 889         const.
 890         (print_insn_arg): Changed static array of one-character-string
 891         pointers into a static const array of characters; fixed sprintf
 892         statement accordingly.
 893
 894 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
 895
 896         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
 897         from distribution. A ns32k-dis.c from a previous distribution has
 898         been brought up to date and supports the new interface.
 899
 900         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
 901
 902         * configure.in: add bfd_ns32k_arch target support.
 903
 904         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
 905         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
 906
 907 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
 908
 909         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
 910         disassembly right.
 911
 912 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
 913
 914         * h8300-dis.c, mips-dis.c: Don't use true and false.
 915
 916 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
 917
 918         * configure.in: Change --with-targets to --enable-targets.
 919
 920 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 921
 922         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
 923         opcodes to the first instruction with that opcode, to speed
 924         disassembly of large files.  From ralphc@pyramid.com (Ralph
 925         Campbell).
 926
 927 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 928
 929         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
 930
 931 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
 932
 933         * configure.bat: update to latest makefile.in
 934
 935 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
 936
 937         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
 938         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
 939         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
 940         slot insn is in a delay slot.
 941         * z8k-opc.h: (resflg): Fix patterns.
 942         * h8500-opc.h Fix CR insn patterns.
 943
 944 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 945
 946         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
 947         "cmpl" before POWER versions, so that gas -many uses them.
 948
 949 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 950
 951         * disassemble.c: New file.
 952         * Makefile.in (OFILES): Add disassemble.o.
 953         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
 954         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
 955         binutils/configure.in.
 956
 957         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
 958         opcode being examined.
 959
 960 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 961
 962         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
 963         (insert_ral, insert_ram, insert_ras): New functions.
 964         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
 965         RAS for store with update.
 966
 967 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 968
 969         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
 970         (edelsohn@npac.syr.edu).
 971
 972 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 973
 974         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
 975         immediate argument.
 976
 977 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
 978
 979         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
 980
 981 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 982
 983         * ppc-opc.c (powerpc_operands): The signedp field has been
 984         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
 985         instead.  Add new operand SISIGNOPT.
 986         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
 987         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
 988         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
 989         than signedp field.
 990
 991 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 992
 993         * i386-dis.c (struct private):  Renamed to dis_private. `private'
 994         is a reserved word for dynix cc.
 995
 996 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 997
 998         * configure.in: Change error message to refer to bfd/config.bfd
 999         rather than bfd/configure.in.
1000
1001 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
1002
1003         * ppc-opc.c: Define POWER2 as short alias flag.
1004         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1005         fsqrt.
1006
1007 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1008
1009         * i960-dis.c (print_insn_i960): Don't read a second word for
1010         opcodes 0, 1, 2 and 3.
1011
1012 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1013
1014         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1015
1016 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1017
1018         * m68881-ext.c: Removed; no longer used.
1019         * Makefile.in: Changed accordingly.
1020
1021         * m68k-dis.c (ext_format_68881): Don't declare.
1022         (print_insn_m68k): If an instruction uses place 'i', it uses at
1023         least four fixed bytes.
1024         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
1025         extended float, convert to double using floatformat_to_double, not
1026         ieee_extended_to_double, and fetch the data before converting it.
1027
1028 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1029
1030         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
1031         davidj@ICSI.Berkeley.EDU (David Johnson).
1032
1033 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1034
1035         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1036         PowerPC uses bdnz[l][a].
1037
1038 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1039
1040         * dis-buf.c, i386-dis.c:  Include sysdep.h.
1041
1042 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1043
1044         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1045
1046         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1047         by Motorola PowerPC 601 with PPC_OPCODE_601.
1048         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1049         Disassemble Motorola PowerPC 601 instructions as well as normal
1050         PowerPC instructions.
1051
1052 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1053
1054         * i960-dis.c (reg, mem): Just use a static array instead of
1055         calling xmalloc.
1056
1057 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1058
1059         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1060         condition name index if this is for a negated condition.
1061
1062         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1063         Floating point format for 'H' operand is backwards from normal
1064         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
1065         operands (fmpyadd and fmpysub), handle bizarre register
1066         translation correctly for single precision format.
1067
1068         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1069         or 'I' operands if the next format specifier is 'M' (fcmp
1070         condition completer).
1071
1072 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1073
1074         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1075         single number giving a bitmask for the MB and ME fields of an M
1076         form instruction.  Change NB to accept 32, and turn it into 0;
1077         also turn 0 into 32 when disassembling.  Seperated SH from NB.
1078         (insert_mbe, extract_mbe): New functions.
1079         (insert_nb, extract_nb): New functions.
1080         (SC_MASK): Mask out SA and LK bits.
1081         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1082         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
1083         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
1084         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1085         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1086         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
1087         (powerpc_macros): Define table of macro definitions.
1088         (powerpc_num_macros): Define.
1089
1090         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1091         if PPC_OPERAND_NEXT is set.
1092
1093 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1094
1095         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1096         char.  Retrieve contents using bfd_getl32 instead of shifting.
1097
1098 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1099
1100         * ppc-opc.c: New file.  Opcode table for PowerPC, including
1101         opcodes for POWER (RS/6000).
1102         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
1103         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1104         (CFILES): Add ppc-dis.c.
1105         (ppc-dis.o, ppc-opc.o): New targets.
1106         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1107
1108 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1109
1110         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1111         No space before 'u', 'f', or 'N'.
1112
1113 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
1114
1115         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1116         farther than we should.
1117
1118         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1119
1120 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1121
1122         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1123
1124 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1125
1126         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1127         needs it, to prevent reading past the end of a section.
1128
1129 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1130
1131         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1132         Removed t,A case for la; always use t,A(b) case.
1133
1134 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1135
1136         From Ted Lemen <mellon@pepper.ncd.com>
1137         * mips-dis.c (print_insn_arg): Handle 'k'.
1138         * mips-opc.c: Make cache use k, not t.
1139
1140 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1141
1142         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
1143         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1144         FLOAT_FORMAT_CODE to put out floating point register names.
1145
1146 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1147
1148         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1149
1150 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1151
1152         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1153
1154 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1155
1156         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1157         larger than 32.  Moved dsxx32 variants first for disassembler.
1158
1159 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1160
1161         * z8kgen.c, z8k-opc.h: Add full lda information.
1162
1163 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
1164
1165         * hppa-dis.c (print_insn_hppa): Do not emit a space after
1166         movb instructions.  Any necessary space will be emitted by
1167         the code to handle nullification completers.
1168
1169 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1170
1171         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1172
1173 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1174
1175         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
1176         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
1177
1178 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1179
1180         * mips-opc.c: Correct lwu opcode value (book had it wrong).
1181
1182 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1183
1184         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1185         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1186
1187 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1188
1189         * m88k-dis.c (m88kdis): comment change.  Remove space after
1190           printing mnemonic.
1191           (printop): handle new arg types DEC and XREG for m88110.
1192
1193 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
1194
1195         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1196         type for absolute branch addresses.  Delete special
1197         "ble" and "be" code in 'W' operand code.
1198
1199 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1200
1201         * mips-opc.c: Set hazard information correctly for branch
1202         likely instructions.
1203
1204 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1205
1206         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1207         info->fprintf_func for printing and info->print_address_func for
1208         address output.
1209
1210 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1211
1212         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1213
1214 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1215
1216         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1217         Corrected second case of "b" for disassembler.
1218
1219 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1220
1221         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1222         to BFD swapping routines to correspond to BFD name changes.
1223
1224 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1225
1226         * mips-opc.c: Change div machine instruction to be z,s,t rather
1227         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1228         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1229         rem and remu which generates only the corresponding div
1230         instruction.  This is for compatibility with the MIPS assembler,
1231         which only generates the simple machine instruction when an
1232         explicit destination of $0 is used.
1233         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1234
1235 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1236
1237         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1238         WR_31 hazard for bal, bgezal, bltzal.
1239
1240 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1241
1242         * hppa-dis.c (print_insn_hppa): Use print function
1243         from within the disassemble_info, not fprintf_filtered.
1244
1245 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1246
1247         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1248         Law, law@cs.utah.edu.)
1249
1250 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1251
1252         * mips-opc.c ("absu"): Removed.
1253         ("dabs"): Added.
1254
1255 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1256
1257         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1258         Changed hazard information to distinguish between memory load
1259         delays and coprocessor load delays.
1260
1261 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1262
1263         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1264
1265 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1266
1267         * configure.in: Don't pass cpu to config.bfd.
1268
1269 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1270
1271         * m88k-dis.c (m88kdis): Make class unsigned.
1272
1273 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1274
1275         * alpha-dis.c (print_insn_alpha): One branch format case was
1276         missing the instruction name.
1277
1278 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1279
1280         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1281         Add the arch-specific auxiliary files.
1282         (OFILES): Remove the arch-specific auxiliary files
1283         and use BFD_MACHINES instead of DIS_LIBS.
1284         * configure.in: Set BFD_MACHINES based on --with-targets option.
1285
1286 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1287
1288         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1289         for swc1.
1290
1291 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1292
1293         * sparc-opc.c: Change CONST to const to deal with gcc
1294         -Dconst=__const -traditional.
1295
1296 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1297
1298         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1299         coprocessor instructions out of #if 0, and made them use new
1300         argument type "C".
1301
1302 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1303
1304         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1305
1306 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1307
1308         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1309         instruction, for use by the disassembler.
1310
1311         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1312         hand-coded sign extensions that depended on 32-bit host ints.
1313         FIXME, we still depend on big-endian host bitfield ordering.
1314         (sparc_print_insn):  Set the insn_info_valid field, and the
1315         other fields that describe the instruction being printed.
1316
1317 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1318
1319         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1320         `jmp' instead of just one of them.
1321
1322 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1323
1324         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1325         (fput_fp_reg_r): Renamed from fput_reg_r.
1326         (fput_fp_reg): New function.
1327         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1328
1329         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1330
1331         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1332
1333 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1334
1335         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1336
1337         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1338         don't output a space.
1339
1340         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1341
1342 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1343
1344         * mips-opc.c: New file, containing opcode table from
1345         ../include/opcode/mips.h.
1346         * Makefile.in: Add it.
1347
1348 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1349
1350         * m88k-dis.c: New file, moved in from gdb and changed to use the
1351         new dis-asm.h disassembler interface.
1352         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1353         (m88k-dis.o): New target.
1354
1355 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1356
1357         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1358         argument string const char * to correspond to opcode/mips.h.
1359
1360 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1361
1362         * mips-dis.c: Updated to account for name changes in new version
1363         of opcode/mips.h.
1364         * Makefile.in: Added header file dependencies.
1365
1366 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1367
1368         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1369
1370 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1371
1372         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1373         extend, rather than shifts.
1374
1375 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1376
1377         * Makefile.in: Undo 15 June change.
1378
1379 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1380
1381         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1382         or error code.
1383         * m68k-dis.c:  Re-write to detect invalid operands before
1384         printing anything, so we can handle this the same way we
1385         handle invalid opcodes.
1386
1387 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1388
1389         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1390
1391 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1392
1393         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1394         header files.
1395
1396 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1397
1398         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1399
1400         * configure.in: Do make sysdep.h link.
1401         * Makefile.in: Search ../include.  Don't search ../bfd.
1402
1403 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1404
1405         Changes from Jeff Law, law@cs.utah.edu:
1406         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1407         Do not print a space before the completers specified by
1408         'a' and 'd'.
1409
1410 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1411
1412         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1413         defined, since gdb has been fixed.
1414
1415         Changes from Jeff Law, law@cs.utah.edu:
1416         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1417         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1418         be a *disassemble_info, not a *FILE.
1419         * hppa-dis.c: Support 'd', '!', and 'a'.
1420         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1421         * hppa-dis.c: Delete cases which are no longer needed.
1422
1423 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1424
1425         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1426
1427 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1428
1429         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1430         H8/300-H opcodes.
1431
1432 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1433
1434         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1435         * configure.in:  No longer need to configure to get sysdep.h.
1436
1437 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1438
1439         * Patches from Jeffrey Law <law@cs.utah.edu>.
1440         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1441         templates for 1.1 FP computational instructions.
1442
1443 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1444
1445         * h8500-dis.c (print_insn_h8500): Address argument is type
1446         bfd_vma.
1447         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1448         Ditto.
1449
1450         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1451         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1452
1453         * sparc-dis.c (compare_opcodes): Move static declaration to
1454         top-level.
1455
1456 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1457
1458         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1459         instruction, remove unimp hack from 'l' argument.
1460
1461 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1462
1463         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1464         happy.
1465
1466 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1467
1468         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1469         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1470         instructions.
1471
1472 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1473
1474         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1475         arrays of string pointers to 2-d arrays of chars, to save
1476         space.
1477
1478 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1479
1480         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1481         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1482
1483 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1484
1485         * hppa-dis.c: New file from Utah, adapted to new disassembler
1486         calling interface.
1487         * Makefile.in: Include it.
1488
1489 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1490
1491         * sh-dis.c, sh-opc.h: New files.
1492
1493 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1494
1495         * alpha-dis.c, alpha-opc.h: New files.
1496
1497 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1498
1499         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1500         value.
1501
1502 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1503
1504         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1505
1506 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1507
1508         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1509         const.
1510
1511 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1512
1513         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1514         and double percent signs a few places.
1515
1516         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1517
1518         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1519         Use info->print_address_func not print_address.
1520
1521         * dis-buf.c (generic_print_address): New function.
1522
1523 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1524
1525         * Makefile.in: Add sparc-dis.c.
1526         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1527         From GDB:
1528             Add `add' instruction to the set that get checked
1529             for a preceding `sethi' in order to print an absolute address.
1530             * (print_insn):  Disassembly prefers real instructions.
1531             (is_delayed_branch):  Speed up.
1532             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1533             Still missing some float ops, and needs testing.
1534             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1535             F_ALIAS.  Use printf, not fprintf, when not passing a file
1536             pointer...
1537             (compare_opcodes): Check that identical instructions have
1538             identical opcodes, complain otherwise.
1539         From binutils:
1540             * New 'm' arg.
1541             * Include reg_names.
1542         From neither:
1543             Use dis-asm.h/read_memory_func interface.
1544
1545 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1546
1547         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1548           deliberately return non-zero to setjmp from longjmp.  Otherwise
1549           this code fails to compile.
1550
1551 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1552
1553         * m68k-dis.c:  Fix prototype for fetch_arg().
1554
1555 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1556
1557         * dis-buf.c: New file, for new read_memory_func interface.
1558         Makefile.in (OFILES): Include it.
1559         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1560         Use new read_memory_func interface.
1561
1562 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1563
1564         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1565         * h8500-opc.h: Fix couple of opcodes.
1566
1567 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1568
1569         * Makefile.in: add dvi & installcheck targets
1570
1571 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1572
1573         * Makefile.in:  Update for h8500-dis.c.
1574
1575 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1576
1577         * h8500-dis.c, h8500-opc.h: New files
1578
1579 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1580
1581         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1582         ../include/dis-asm.h.
1583         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1584         and ../gdb/m68k-pinsn.c).
1585         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1586         and ../gdb/i386-pinsn.c).
1587         * m68881-ext.c:  New file.  Moved definition of
1588         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1589         * Makefile.in:  Adjust for new files.
1590         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1591         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1592         can be dis-assembled.
1593
1594 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1595
1596         * mips-dis.c (print_insn_arg): Now returns void.
1597
1598 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1599
1600         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1601         files that use the macros.
1602
1603 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1604
1605         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1606         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1607         (CFILES): Added mips-dis.c.
1608
1609 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1610
1611         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1612         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1613
1614 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1615
1616         * Makefile.in:  Improve *clean rules.
1617         * configure.in:  Allow a default host.
1618
1619 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1620
1621         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1622         files include other sysdep files
1623
1624 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1625
1626         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1627
1628 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1629
1630         * configure.in:  For host support, use ../bfd/configure.host
1631         so it stays in sync with the ../bfd/hosts database.
1632
1633 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1634
1635         * configure.in: use cpu-vendor-os triple instead of nested cases
1636
1637 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1638
1639         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1640         *always* the wrong one.
1641
1642 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1643
1644         * z8kgen.c: added copyright info
1645
1646 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1647
1648         * z8k-dis.c (unparse_instr): prettier tabs
1649         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1650
1651 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1652
1653         * configure.in:  Add ncr* configuration.
1654         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1655         picayune ANSI compilers happy.
1656
1657 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1658
1659         * configure.in (i386):  Make i386 and i486 synonymous for now.
1660         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1661
1662 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1663
1664         * Makefile.in (install): Fix typo.
1665
1666 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1667
1668         * Makefile.in (make):  Remove obsolete crud.
1669         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1670
1671 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1672
1673         * Makefile.in: since there are no SUBDIRS, remove rule and
1674         references of subdir_do.
1675
1676 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1677
1678         * Makefile.in (install): Get the library name right here too.
1679         Don't install bfd.h, since it's unrelated to this library.  No
1680         subdirs to recurse into, either.
1681         (CFILES): The source file has a .c suffix, not .o.
1682
1683         * sparc-opc.c: New file, moved from BFD.
1684         * Makefile.in (OFILES): Build it.
1685
1686 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1687
1688         * z8k-dis.c: fixed forward refferences of some declarations.
1689
1690 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1691
1692         * Makefile.in: get the name of the library right
1693
1694 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1695
1696         * z8k-dis.c: knows how to disassemble z8k stuff
1697         * z8k-opc.h: new file full of z8000 opcodes
1698
1699 \f
1700 Local Variables:
1701 version-control: never
1702 End: