1 2009-11-11 Nick Clifton <nickc@redhat.com>
4 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
5 (print_insn_arm): Extend %s format control code to check for
6 unpredictable addressing modes. Add support for %S format control
7 code which suppresses this check.
8 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
9 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
10 PRE_BIT_SET): New macros.
11 (print_insn_coprocessor): Use the new macros instead of magic
13 (print_arm_address): Likewise.
14 (pirnt_insn_arm): Likewise.
15 (print_insn_thumb32): Likewise.
17 2009-11-11 Nick Clifton <nickc@redhat.com>
19 * po/id.po: Updated Indonesian translation.
21 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
23 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
25 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
27 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
28 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
29 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
31 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
34 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
35 Quentin Neill <quentin.neill@amd.com>
37 * opcodes/i386-dis.c (OP_LWPCB_E): New.
40 (USE_XOP_8F_TABLE): New.
46 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
47 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
49 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
50 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
51 to access to the vex_table.
55 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
56 (cpu_flags): Add CpuLWP.
57 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
58 * opcodes/i386-opc.h (CpuLWP): New.
59 (i386_cpu_flags): Add bit cpulwp.
63 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
64 * opcodes/i386-opc.tbl (llwpcb): Added.
68 2009-11-04 DJ Delorie <dj@redhat.com>
70 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
71 (mvtcp, mvfcp, opecp): Remove.
72 * rx-decode.c: Regenerate.
73 * rx-dis.c (cpen): Remove.
75 2009-11-03 Doug Evans <dje@sebabeach.org>
77 * m32c-desc.c: Regenerate.
78 * mep-desc.c: Regenerate.
80 2009-11-02 Paul Brook <paul@codesourcery.com>
82 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
83 Add VFPv4 instructions.
85 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
87 * i386-dis.c (OP_VEX_FMA): Removed.
90 (prefix_table): First source operand of FMA4 insns is decoded
91 with Vex not with VexFMA.
92 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
93 when vex.w is set. Third source operand is decoded with
95 2009-10-27 Alan Modra <amodra@bigpond.net.au>
97 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
98 * Makefile.in: Regenerate.
99 * po/POTFILES.in: Regenerate.
101 2009-10-23 Doug Evans <dje@sebabeach.org>
103 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
104 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
105 * cgen-bitset.c: Update.
106 * fr30-desc.h: Regenerate.
107 * frv-desc.h: Regenerate.
108 * ip2k-desc.h: Regenerate.
109 * iq2000-desc.h: Regenerate.
110 * lm32-desc.h: Regenerate.
111 * m32c-desc.h: Regenerate.
112 * m32c-opc.h: Regenerate.
113 * m32r-desc.h: Regenerate.
114 * mep-desc.h: Regenerate.
115 * mt-desc.h: Regenerate.
116 * openrisc-desc.h: Regenerate.
117 * xc16x-desc.h: Regenerate.
118 * xstormy16-desc.h: Regenerate.
120 2009-10-22 DJ Delorie <dj@redhat.com>
122 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
123 * rx-decode.c: Regenerated.
125 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
128 * i386-dis.c: Document LB, LS and LV macros.
129 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
130 with the 64-bit displacement or immediate operand.
131 (putop): Handle LB, LS and LV macros.
133 2009-10-18 Doug Evans <dje@sebabeach.org>
135 * lm32-opinst.c: Regenerate.
136 * m32c-desc.c: Regenerate.
137 * m32r-opinst.c: Regenerate.
138 * openrisc-ibld.c: Regenerate.
139 * xc16x-desc.c: Regenerate.
140 * xc16x-desc.h: Regenerate.
142 2009-10-17 Doug Evans <dje@sebabeach.org>
144 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
145 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
146 sorted alphabetically.
147 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
148 stamp-* rules are sorted alphabetically.
149 * Makefile.in: Regenerate.
151 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
153 * i386-opc.h: Use enum instead of nested macros.
155 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
157 * i386-dis.c: Simplify enums.
159 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
160 Ineiev <ineiev@gmail.com>
163 * i386-dis.c: Use enum instead of nested macros.
165 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
167 * i386-dis.c (MAX_BYTEMODE): Removed.
169 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
172 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
174 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
176 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
179 2009-10-07 Michael Eager <eager@eagercon.com>
181 * microblaze-dis.c: Add include for microblaze-dis.h,
182 eliminate local extern decls.
183 * microblaze-dis.h: New.
185 2009-10-06 Nick Clifton <nickc@redhat.com>
187 * po/fi.po: Updated Finnish translation.
189 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
191 * opc2c.c: Include "libiberty.h" and <errno.h>.
192 (orig_filename): Constify.
193 (dump_lines): Fix line number directive.
194 (main): Set orig_filename to basename of input file. Use
197 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
198 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
199 instead of $(EXEEXT).
200 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
201 $(LINK_FOR_BUILD). Link with libiberty.
202 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
203 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
204 * Makefile.in: Regenerated.
205 * rx-decode.c: Regenerated.
207 2009-10-03 Paul Reed <paulreed@paddedcell.com>
209 * arm-dis.c (print_insn): Check symtab_size not *symtab.
211 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
213 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
214 * i386-tbl.h: Regenerated.
216 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
218 * ppc-dis.c (ppc_opts): Add "476" entry.
219 * ppc-opc.c (PPC476): Define.
220 (powerpc_opcodes): Update mnemonics where required for 476.
222 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
224 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
225 * ppc-dis.c (ppc_opts): Likewise.
226 Rename "ppca2" to "a2".
228 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
230 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
232 2009-09-29 DJ Delorie <dj@redhat.com>
234 * Makefile.am: Add RX files.
235 * configure.in: Add support for RX target.
236 * disassemble.c: Likewise.
237 * Makefile.in: Regenerate.
238 * configure: Regenerate.
240 * rx-decode.c: New file.
241 * rx-decode.opc: New file.
242 * rx-dis.c: New file.
244 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
246 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
247 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
249 2009-09-25 Michael Eager <eager@eagercon.com>
251 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
252 microblaze_decode_insn): Add declarations.
253 (get_delay_slots_microblaze): Remove.
255 2009-09-25 Martin Thuresson <martint@google.com>
257 Update sources to make arc and arm targets compile cleanly with
259 * arc-dis.c Fix casts.
260 * arc-ext.c: Add casts.
261 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
264 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
266 * i386-gen.c (opcode_modifiers): Remove Vex256.
267 (set_bitfield): Handle XXX=V.
269 * i386-opc.h (Vex): Update comments.
272 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
274 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
275 * i386-tbl.h: Regenerated.
277 2009-09-23 Nick Clifton <nickc@redhat.com>
279 * po/fr.po: Updated French translation.
281 2009-09-21 Ben Elliston <bje@au.ibm.com>
282 Peter Bergner <bergner@vnet.ibm.com>
284 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
285 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
286 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
287 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
289 (ERAT_T): New operand.
290 (XWC_MASK): New mask.
294 2009-09-18 Nick Clifton <nickc@redhat.com>
296 * po/es.po: Updated Spanish translation.
297 * po/vi.po: Updated Vietnamese translation.
299 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
301 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
304 2009-09-14 Nick Clifton <nickc@redhat.com>
306 * po/nl.po: Updated Dutch translation.
308 2009-09-11 Nick Clifton <nickc@redhat.com>
310 * po/opcodes.pot: Updated by the Translation project.
312 2009-09-11 Martin Thuresson <martint@google.com>
314 Updated sources to compile cleanly with -Wc++-compat:
315 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
316 * ldcref.c: Add casts.
317 * ldctor.c: Add casts.
319 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
320 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
321 * ldlang.h (enum statement_enum): Move to top level.
322 * ldmain.c: Add casts.
323 * ldwrite.c: Add casts.
324 * lexsup.c: Add casts. (enum control_enum): Move to top level.
325 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
327 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
329 * s390-dis.c (print_insn_s390): Avoid 'long long'.
331 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
333 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
334 (print_insn_s390): Signextend and shift pcrel operands before printing.
336 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
338 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
339 VEX_LEN_AE_R_X_M_0 in comments.
341 2009-09-08 DJ Delorie <dj@redhat.com>
343 * mep-opc.c: Regenerate.
345 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
347 * z8kgen.c (struct op): Replace unused flavor with id.
348 (opt): Remove extra xorb entry.
349 (func): Use id field as fallback.
350 (sub): Return new string, caller changed.
351 (internal): Allocate end marker. Assign unique id before sorting.
352 (gas): Likewise. Fix loop end condition.
353 * z8k-opc.h: Regenerate.
355 2009-09-08 Alan Modra <amodra@bigpond.net.au>
357 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
359 2009-09-07 Alan Modra <amodra@bigpond.net.au>
361 * z8kgen.c (func): Fix thinko last patch.
363 2009-09-07 Alan Modra <amodra@bigpond.net.au>
365 * z8kgen.c (func): Stabilize qsort of identically named entries.
366 * z8k-opc.h: Regenerate.
368 2009-09-07 Tristan Gingold <gingold@adacore.com>
370 * po/opcodes.pot: Regenerate.
372 2009-09-07 Alan Modra <amodra@bigpond.net.au>
374 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
375 * configure: Regenerate.
376 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
377 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
378 (i386-gen, ia64-gen, z8kgen): ..here.
379 * Makefile.in: Regenerate.
381 2009-09-07 Tristan Gingold <gingold@adacore.com>
383 * z8k-opc.h: Regenerate.
385 2009-09-05 Martin Thuresson <martin@mtme.org>
387 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
388 * m88k-dis.c (m88kdis): Rename variable class to in_class.
389 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
390 Rename argument class to symbol_class.
392 2009-09-04 Jie Zhang <jie.zhang@analog.com>
394 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
395 to the new encoding of DBGA, DBGAH, and DBGAL.
396 (_print_insn_bfin): Likewise.
398 2009-09-03 Jie Zhang <jie.zhang@analog.com>
400 * bfin-dis.c (_print_insn_bfin): Don't declare.
401 (print_insn_bfin): Don't declare.
402 (dregs_pair): Remove.
403 (ignore_bits): Remove.
406 2009-09-03 Jie Zhang <jie.zhang@analog.com>
408 * bfin-dis.c (IS_DREG): Define.
414 (decode_REGMV_0): Check illegal register move instructions.
416 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
418 * Makefile.am (BUILD_LIBINTL): New variable.
419 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
420 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
421 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
422 * Makefile.in: Regenerate.
424 2009-09-01 DJ Delorie <dj@redhat.com>
426 * mep-asm.c: Regenerate.
427 * mep-desc.c: Regenerate.
428 * mep-opc.c: Regenerate.
430 2009-09-01 Tristan Gingold <gingold@adacore.com>
432 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
433 dependencies. Remove unused FORMAT variable.
434 * configure.com: New file to create build.com DCL script for
435 Itanium VMS or Alpha VMS.
437 2009-08-29 Martin Thuresson <martin@mtme.org>
439 * cris-dis.c (bytes_to_skip): Update code to use new name.
440 * i386-dis.c (putop): Update code to use new name.
441 * i386-gen.c (process_i386_opcodes): Update code to use
443 * i386-opc.h (struct template): Rename struct template to
444 insn_template. Update code accordingly.
445 * i386-tbl.h (i386_optab): Update type to use new name.
446 * ia64-dis.c (print_insn_ia64): Rename variable template
448 * tic30-dis.c (struct instruction, get_tic30_instruction):
449 Update code to use new name.
450 * tic54x-dis.c (has_lkaddr, get_insn_size)
451 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
452 Update code to use new name.
453 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
454 Update type to new name.
455 * z8kgen.c (internal, gas): Rename variable new to new_op.
457 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
459 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
460 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
461 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
462 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
463 * Makefile.in: Regenerated.
465 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
467 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
468 [INSTALL_LIBBFD]: ... here, ...
469 [INSTALL_LIBBFD]: ... and empty overrides here.
470 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
471 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
472 * Makefile.in: Regenerate.
473 * configure: Regenerate.
475 2009-08-26 Philippe De Muyter <phdm@macqel.be>
477 * m68k-dis.c (print_insn_arg): Add movecr register names for
478 coldfire v4e families.
480 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
482 * Makefile.am (SUBDIRS): Build '.' before 'po'.
483 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
484 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
485 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
486 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
487 (i386-gen.o): New rule.
488 ($(srcdir)/i386-init.h): Adjust.
489 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
490 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
491 (ia64-gen.o): New rule.
492 (ia64_asmtab_deps): New variable.
493 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
494 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
495 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
497 (s390-opc.tab): Adjust.
498 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
500 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
501 * Makefile.in: Regenerate.
502 * z8kgen.c (gas): Avoid '/*' in comment.
503 * z8k-opc.h (func): Regenerate.
505 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
507 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
508 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
509 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
510 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
512 (LIBOPCODES_CFILES): New variable, adding to
513 TARGET_LIBOPCODES_CFILES also non-target library sources.
514 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
516 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
517 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
518 * Makefile.in: Regenerate.
519 * po/POTFILES.in: Regenerate.
521 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
523 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
524 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
525 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
526 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
527 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
528 is built shared even if it is not to be installed.
529 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
530 (install_libopcodes, uninstall_libopcodes): Remove.
531 (AM_CPPFLAGS): Renamed from ...
532 (INCLUDES): ... this.
533 * Makefile.in: Regenerate.
535 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
536 1.11, foreign, no-dist.
537 (MKDEP, m32c_opc_h): Remove variables.
538 (disassemble.lo): Rewrite using automake-style dependency
539 tracking rules; only list the dependency upon the primary source
540 file, but no included headers.
541 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
542 (i386-gen.o, ia64-gen.o): Remove dependency statements.
543 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
544 ensure all dependency fragments are included in the Makefile.
545 (s390-opc.lo): Depend on s390-opc.tab.
546 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
547 (mkdep section): Remove.
548 * Makefile.in: Regenerate.
549 * po/POTFILES.in: Regenerate.
551 * Makefile.am (install-pdf, install-html): Remove.
552 * Makefile.in: Regenerate.
554 * Makefile.in: Regenerate.
555 * aclocal.m4: Likewise.
556 * config.in: Likewise.
557 * configure: Likewise.
559 2009-08-06 Michael Eager <eager@eagercon.com>
561 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
562 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
563 * Makefile.in: Regenerate.
564 * configure.in: Add bfd_microblaze_arch target.
565 * configure: Regenerate.
566 * disassemble.c: Define ARCH_microblaze, return
567 print_insn_microblaze().
568 * microblaze-dis.c: New MicroBlaze disassembler.
569 * microblaze-opc.h: New MicroBlaze opcode definitions.
570 * microblaze-opcm.h: New MicroBlaze opcode types.
572 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
574 * configure.in: Handle bfd_l1om_arch.
575 * disassemble.c (disassembler): Likewise.
577 * configure: Regenerated.
579 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
580 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
582 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
584 (cpu_flags): Add CpuL1OM.
585 (set_bitfield): Take an argument to set the value field.
586 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
587 (process_i386_opcode_modifier): Updated.
588 (process_i386_operand_type): Likewise.
589 * i386-init.h: Regenerated.
590 * i386-tbl.h: Likewise.
592 * i386-opc.h (CpuL1OM): New.
594 (i386_cpu_flags): Add cpul1om.
596 2009-07-24 Jan Beulich <jbeulich@novell.com>
598 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
600 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
601 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
602 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
603 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
605 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
607 * i386-opc.tbl: Qualify floating point instructions by their
608 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
609 and fsincos to be avilable only on 387. Fix fstsw ax to be
610 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
612 * i386-init.h, i386-tbl.h: Regenerate.
614 2009-07-20 Nick Clifton <nickc@redhat.com>
617 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
618 offset or indexed based addressing mode 3.
620 2009-07-14 Nick Clifton <nickc@redhat.com>
623 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
625 (arm_decode_shift): Catch illegal register based shifts.
626 (print_insn_arm): Properly handle negative register r0
627 post-indexed addressing.
629 2009-07-10 Doug Kwan <dougkwan@google.com>
631 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
632 lower 32 bits of long types to make hexadecimal output consistent
633 on both 32-bit and 64-bit hosts.
635 2009-07-10 Alan Modra <amodra@bigpond.net.au>
637 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
638 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
639 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
640 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
641 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
642 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
643 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
644 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
645 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
646 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
647 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
648 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
650 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
652 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
654 2009-07-07 Nick Clifton <nickc@redhat.com>
657 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
660 2009-07-06 DJ Delorie <dj@redhat.com>
662 * mep-desc.c: Regenerate.
663 * mep-desc.h: Regenerate.
664 * mep-opc.c: Regenerate.
665 * mep-opc.h: Regenerate.
667 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
669 * i386-opc.h (CpuFMA4): Add CpuFMA4.
670 (i386_cpu_flags): New.
671 * i386-gen.c: Add CPU_FMA4_FLAGS.
672 * i386-opc.tbl: Add FMA4 instructions.
673 * i386-tbl.h: Regenerate.
674 * i386-init.h: Regenerate.
675 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
676 (OP_XMM_VexW): Ditto.
678 (VEXI4_Fixup): Ditto.
679 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
680 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
681 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
682 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
683 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
684 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
685 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
686 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
687 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
688 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
689 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
690 (get_vex_imm8): New. handle FMA4.
691 (OP_EX_VexReg): Ditto.
693 2009-06-30 Nick Clifton <nickc@redhat.com>
696 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
697 LFM and SFM instructions as comments,.
698 Improve consistency of formatting for instructions displayed as
699 comments and decimal values displayed with their hexadecimal
703 2009-06-29 Nick Clifton <nickc@redhat.com>
706 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
707 boundary between variaant and generic coprocessor instuctions.
708 (coprocessor): Use it.
709 Fix architecture version of MCRR and MRRC instructions.
710 (arm_opcdes): Fix patterns for STRB and STRH instructions.
711 (print_insn_coprocessor): Check architecture and extension masks.
712 Print a hexadecimal version of any decimal constant that is
713 outside of the range of -16 to +32.
714 (print_arm_address): Add a return value of the offset used in the
715 adress, if it is worth printing a hexadecimal version of it.
716 (print_insn_neon): Print a hexadecimal version of any decimal
717 constant that is outside of the range of -16 to +32.
718 (print_insn_arm): Likewise.
719 (print_insn_thumb16): Likewise.
720 (print_insn_thumb32): Likewise.
723 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
724 of an undefined instruction.
725 (arm_opcodes): Use it.
726 (thumb_opcod): Use it.
727 (thumb32_opc): Use it.
729 2009-06-23 DJ Delorie <dj@redhat.com>
731 * mep-desc.c: Regenerate.
732 * mep-desc.h: Regenerate.
733 * mep-dis.c: Regenerate.
734 * mep-ibld.c: Regenerate.
735 * mep-opc.c: Regenerate.
737 * mep-asm.c: Regenerate.
738 * mep-opc.c: Regenerate.
739 * mep-opc.h: Regenerate.
741 2009-06-22 Nick Clifton <nickc@redhat.com>
743 * po/fi.po: Updated Finish translation.
745 2009-06-22 Alan Modra <amodra@bigpond.net.au>
747 * m32c-asm.c: Regenerate.
749 2009-06-22 Alan Modra <amodra@bigpond.net.au>
751 * score-dis.c (print_insn_score48, print_insn_score32): Move default
752 case label to proper lexical block.
753 * score7-dis.c (print_insn_score32): Likewise.
755 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
757 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
758 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
759 * s390-opc.txt (nopr, nop): Use new instruction format.
761 2009-06-18 Nick Clifton <nickc@redhat.com>
764 * arm-dis.c (print_insn_coprocessor): Check that a user specified
765 ARM architecture supports the matched instruction.
766 (print_insn_arm): Likewise.
767 (select_arm_features): New function. Fills in the fields of an
768 arm_feature_set structure based on a given arm machine number.
769 (print_insn): Initialise an arm_feature_set structure.
771 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
773 * vax-dis.c (is_function_entry): Return success for synthetic
775 (is_plt_tail): New function.
776 (print_insn_vax): Decode PLT entry offset longword.
778 2009-06-15 Nick Clifton <nickc@redhat.com>
781 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
785 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
787 2009-06-15 Nick Clifton <nickc@redhat.com>
790 * arm-dis.c (print_insn): Ignore is_data if the user has requested
791 the disassembly of data as well as instructions.
793 2009-06-11 Doug Evans <dje@sebabeach.org>
795 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
797 2009-06-11 Anthony Green <green@moxielogic.com>
799 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
800 (moxie_form3_opc_info): Add branch instructions.
801 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
802 encoded instructions.
804 2009-06-06 Anthony Green <green@moxielogic.com>
806 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
807 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
809 2009-06-04 Alan Modra <amodra@bigpond.net.au>
811 * dep-in.sed: Don't use \n in replacement part of s command.
812 * Makefile.am (DEP1): LC_ALL for uniq.
813 * Makefile.in: Regenerate.
815 2009-06-02 Nick Clifton <nickc@redhat.com>
817 * po/nl.po: Updated Dutch translation.
819 2009-06-02 Tristan Gingold <gingold@adacore.com>
821 * ia64-gen.c (parse_resource_users, print_dependency_table,
822 add_dis_table_ent, finish_distable, insert_bit_table_ent,
823 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
824 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
825 insert_completer_entry, print_completer_entry, print_completer_table,
826 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
828 2009-05-28 DJ Delorie <dj@redhat.com>
830 * mep-asm.c: Regenerate.
831 * mep-desc.c: Regenerate.
833 2009-05-26 DJ Delorie <dj@redhat.com>
835 * mep-asm.c: Regenerate.
836 * mep-desc.c: Regenerate.
837 * mep-desc.h: Regenerate.
838 * mep-dis.c: Regenerate.
839 * mep-ibld.c: Regenerate.
840 * mep-opc.c: Regenerate.
841 * mep-opc.h: Regenerate.
843 2009-05-26 Nick Clifton <nickc@redhat.com>
845 * po/id.po: Updated Indonesian translation.
846 * po/opcodes.pot: Updated template file.
848 2009-05-26 Alan Modra <amodra@bigpond.net.au>
850 * dep-in.sed: Don't modify .o to .lo here. Output one filename
851 per line with all lines having continuation backslash. Prefix
852 first line with "A", following lines with "B".
853 * Makefile.am (DEP): Don't use dep.sed here.
854 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
855 dep.sed here on dependencies, sort and uniq.
856 * Makefile.in: Regenerate.
858 2009-05-25 Tristan Gingold <gingold@adacore.com>
860 * makefile.vms (OPT): New variable.
861 (CFLAGS): Update compilation flags.
863 2009-05-22 DJ Delorie <dj@redhat.com>
865 * mep-asm.c: Regenerate.
866 * mep-desc.c: Regenerate.
867 * mep-desc.h: Regenerate.
868 * mep-dis.c: Regenerate.
869 * mep-ibld.c: Regenerate.
870 * mep-opc.c: Regenerate.
871 * mep-opc.h: Regenerate.
873 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
875 * i386-opc.h (Cpusse5): Delete.
876 (i386_cpu_flags): Delete.
877 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
878 * i386-opc.tbl: Remove SSE5 instructions.
879 * i386-tbl.h: Regenerate.
880 * i386-init.h: Regenerate.
881 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
882 (print_drex_arg): Delete.
885 (OP_DREX_ICMP): Delete.
886 (OP_DREX_FCMP): Delete.
888 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
890 2009-05-22 Alan Modra <amodra@bigpond.net.au>
892 * Makefile.am: Run "make dep-am".
893 * Makefile.in: Regenerate.
894 * po/POTFILES.in: Regenerate.
896 2009-05-19 DJ Delorie <dj@redhat.com>
898 * mep-asm.c: Regenerate.
899 * mep-opc.c: Regenerate.
901 2009-04-30 DJ Delorie <dj@redhat.com>
903 * mep-asm.c: Regenerate.
904 * mep-desc.c: Regenerate.
905 * mep-desc.h: Regenerate.
906 * mep-dis.c: Regenerate.
907 * mep-ibld.c: Regenerate.
908 * mep-opc.c: Regenerate.
909 * mep-opc.h: Regenerate.
911 2009-04-17 DJ Delorie <dj@redhat.com
913 * mep-desc.c: Regenerate.
914 * mep-ibld.c: Regenerate.
915 * mep-opc.c: Regenerate.
916 * mep-opc.h: Regenerate.
918 2009-04-15 Anthony Green <green@moxielogic.com>
920 * moxie-opc.c, moxie-dis.c: Created.
921 * Makefile.am: Build the moxie source files.
922 * configure.in: Add moxie support.
923 * Makefile.in, configure: Rebuilt.
924 * disassemble.c (disassembler): Add moxie support.
925 (ARCH_moxie): Define.
927 2009-04-15 Jan Beulich <jbeulich@novell.com>
929 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
931 (pshab, pshaw, pshad, pshaq): Likewise.
932 * i386-tbl.h: Re-generate.
934 2009-04-08 DJ Delorie <dj@redhat.com
936 * mep-asm.c: Regenerate.
937 * mep-desc.c: Regenerate.
938 * mep-desc.h: Regenerate.
939 * mep-dis.c: Regenerate.
940 * mep-ibld.c: Regenerate.
941 * mep-opc.c: Regenerate.
942 * mep-opc.h: Regenerate.
944 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
946 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
947 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
948 Reorder entries so the extended mnemonics are listed before tlbilx.
950 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
952 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
954 (print_insn_powerpc): Make sure we only deprecate instructions using
955 the original dialect and not a modified dialect due to -Many handling.
956 Move the handling of the condition register and default operands to
957 the end of the if/else if/else chain.
958 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
959 instructions from newer processors are listed before older ones.
960 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
961 that have instructions with conflicting opcodes.
963 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
965 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
968 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
970 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
972 2009-03-30 Joseph Myers <joseph@codesourcery.com>
974 * arm-dis.c (print_insn): Also check section matches in backwards
975 search for mapping symbol.
977 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
979 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
981 2009-03-18 Alan Modra <amodra@bigpond.net.au>
983 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
984 * Makefile.am: Run "make dep-am".
985 * Makefile.in: Regenerate.
986 * openrisc-opc.c: Regenerate.
988 2009-03-10 Nick Clifton <nickc@redhat.com>
990 * po/id.po: Updated Indonesian translation.
992 2009-03-10 Alan Modra <amodra@bigpond.net.au>
994 * ppc-dis.c: Include "opintl.h".
995 (struct ppc_mopt, ppc_opts): New.
996 (ppc_parse_cpu): New function.
997 (powerpc_init_dialect): Use it.
998 (print_ppc_disassembler_options): Dump options from ppc_opts.
999 Internationalize message.
1001 2009-03-06 Nick Clifton <nickc@redhat.com>
1003 * po/es.po: Updated Spanish translation.
1005 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1008 * configure.in: Test for ld --as-needed support. Link shared
1009 libopcodes against libm.
1010 * configure: Regenerate.
1012 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1014 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1015 instructions from newer processors are listed before older ones.
1017 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1019 * Makefile.am: Run "make dep-am".
1020 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1022 * Makefile.in: Regenerate.
1024 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1026 * score7-dis.c: New file.
1027 * Makefile.am: Add dependencies for score7-dis.c.
1028 * Makefile.in: Regenerate.
1029 * configure.in: Add score7-dis to score files.
1030 * configure: Regenerate.
1031 * score-dis.c: Add support for score7 architecture.
1032 * score-opc.h: Likewise.
1034 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1036 * configure: Regenerate.
1038 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1040 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1042 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1044 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1045 the power7 and the isel instructions.
1046 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1047 (insert_dm, extract_dm): Likewise.
1048 (XB6): Update comment to include XX2 form.
1049 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1050 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1051 (RemoveXX3DM): Delete.
1052 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1053 "mftgpr">: Deprecate for POWER7.
1054 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1055 "frsqrte.">: Deprecate the three operand form and enable the two
1056 operand form for POWER7 and later.
1057 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1058 <"waitsrv", "waitimpl">: Add extended opcodes.
1059 <"ldbrx", "stdbrx">: Enable for POWER7.
1060 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1061 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1062 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1063 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1064 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1065 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1066 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1067 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1068 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1069 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1070 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1071 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1072 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1073 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1074 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1075 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1076 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1077 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1078 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1079 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1080 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1081 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1082 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1083 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1084 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1085 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1086 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1087 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1088 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1089 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1090 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1091 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1092 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1093 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1094 "xxspltw", "xxswapd">: Add VSX opcodes.
1096 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1098 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1099 (operand_types): Remove Vex_Imm4.
1101 * i386-opc.h (Vex_Imm4): Removed.
1103 (i386_operand_type): Remove vex_imm4.
1105 * i386-opc.tbl: Remove Vex_Imm4 comments.
1106 * i386-init.h: Regenerated.
1107 * i386-tbl.h: Likewise.
1109 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1111 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1112 vq{r}shr{u}n.s64 insnstructions.
1114 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1116 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1117 operand to be a float point register (FRT/FRS).
1119 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1121 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1122 dmfc2 and dmtc2 before the architecture-level variants.
1124 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1126 * fr30-opc.c: Regenerate.
1127 * frv-opc.c: Regenerate.
1128 * ip2k-opc.c: Regenerate.
1129 * iq2000-opc.c: Regenerate.
1130 * lm32-opc.c: Regenerate.
1131 * m32c-opc.c: Regenerate.
1132 * m32r-opc.c: Regenerate.
1133 * mep-opc.c: Regenerate.
1134 * mt-opc.c: Regenerate.
1135 * xc16x-opc.c: Regenerate.
1136 * xstormy16-opc.c: Regenerate.
1137 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1140 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1142 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1144 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1146 * ppc-opc.c: Update copyright year.
1147 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1148 ordering for POWER4 and later and use the correct Server ordering.
1150 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1152 AVX Programming Reference (January, 2009)
1153 * i386-dis.c (PREFIX_VEX_3A44): New.
1154 (VEX_LEN_3A44_P_2): Likewise.
1155 (PREFIX_VEX_3A48): Updated.
1156 (VEX_LEN_3A4C_P_2): Likewise.
1157 (prefix_table): Add PREFIX_VEX_3A44.
1158 (vex_table): Likewise.
1159 (vex_len_table): Add VEX_LEN_3A44_P_2.
1161 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1162 * i386-tbl.h: Regenerated.
1164 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1166 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1167 (mips_arch_choices): Add XLR entry.
1168 * mips-opc.c (XLR): Define.
1169 (mips_builtin_opcodes): Add XLR instructions.
1171 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1173 * Makefile.am: Add install-pdf target.
1174 * po/Make-in: Add install-pdf target.
1175 * Makefile.in: Regenerate.
1177 2009-02-02 DJ Delorie <dj@redhat.com>
1179 * mep-asm.c: Regenerate.
1180 * mep-desc.c: Regenerate.
1181 * mep-desc.h: Regenerate.
1182 * mep-dis.c: Regenerate.
1183 * mep-ibld.c: Regenerate.
1184 * mep-opc.c: Regenerate.
1185 * mep-opc.h: Regenerate.
1187 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1189 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1192 2009-01-28 Chao-ying Fu <fu@mips.com>
1194 * mips-opc.c (suxc1): Add the flag of FP_D.
1196 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1198 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1199 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1200 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1201 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1202 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1203 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1204 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1205 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1207 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1209 * configure.in (commonbfdlib): Delete.
1210 (SHARED_LIBADD): Add pic libiberty if such is available.
1211 * configure: Regenerate.
1212 * po/POTFILES.in: Regenerate.
1214 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1216 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1217 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1218 operand form and enable the four operand form for POWER6 and later.
1219 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1220 three operand form for POWER6 and later.
1222 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1224 * bfin-dis.c (OUTS): Use "%s" as format string.
1226 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1228 * i386-gen.c (cpu_flag_init): Remove a white space.
1229 (operand_type_init): Likewise.
1231 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1233 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1234 * i386-tbl.h: Regenerated.
1236 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1238 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1239 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1240 subS, xorS and cmpS.
1242 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1244 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1245 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1246 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1247 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1250 (set_bitfield): Take an argument, lineno. Don't report lineno
1251 on error if it is -1.
1252 (process_i386_cpu_flag): Take an argument, lineno.
1253 (process_i386_opcode_modifier): Likewise.
1254 (process_i386_operand_type): Likewise.
1255 (output_i386_opcode): Likewise.
1256 (opcode_hash_entry): Add lineno.
1257 (process_i386_opcodes): Updated.
1258 (process_i386_registers): Likewise.
1259 (process_i386_initializers): Likewise.
1261 * i386-opc.h (CpuP4): Removed.
1265 (CpuSYSCALL): Likewise.
1267 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1268 cpuclflush and cpusyscall.
1270 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1272 * i386-init.h: Regenerated.
1273 * i386-tbl.h: Likewise.
1275 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1277 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1278 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1279 (cpu_flags): Add CpuRdtscp.
1280 (set_bitfield): Remove CpuSledgehammer check.
1282 * i386-opc.h (CpuRdtscp): New.
1284 (i386_cpu_flags): Add cpurdtscp.
1286 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1287 * i386-init.h: Regenerated.
1288 * i386-tbl.h: Likewise.
1290 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1292 * ppc-opc.c (PPCNONE): Define.
1294 (powerpc_opcodes): Initialize the new "deprecated" field.
1296 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1298 AVX Programming Reference (December, 2008)
1299 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1300 (VEX_LEN_E7_P_2_M_0): Likewise.
1301 (VEX_LEN_2C_P_1): Updated.
1302 (VEX_LEN_E8_P_2): Likewise.
1303 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1304 (mod_table): Likewise.
1306 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1307 * i386-tbl.h: Regenerated.
1309 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1311 * i386-gen.c (process_copyright): Update for 2009.
1313 * i386-init.h: Regenerated.
1314 * i386-tbl.h: Likewise.
1316 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1318 AVX Programming Reference (December, 2008)
1319 * i386-dis.c (OP_VEX_FMA): Removed.
1320 (OP_EX_VexW): Likewise.
1321 (OP_EX_VexImmW): Likewise.
1322 (OP_XMM_VexW): Likewise.
1323 (VEXI4_Fixup): Likewise.
1324 (VPERMIL2_Fixup): Likewise.
1327 (Vex128FMA): Likewise.
1329 (EXdVexW): Likewise.
1330 (EXqVexW): Likewise.
1331 (EXVexImmW): Likewise.
1333 (VPERMIL2): Likewise.
1334 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1335 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1336 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1337 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1338 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1339 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1340 (get_vex_imm8): Likewise.
1341 (OP_EX_VexReg): Likewise.
1342 vpermil2_op): Likewise.
1344 (vex_w_dq_mode): Likewise.
1345 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1346 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1347 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1349 (PREFIX_VEX_38DB): Likewise.
1350 (PREFIX_VEX_3A4A): Likewise.
1351 (PREFIX_VEX_3A60): Likewise.
1352 (PREFIX_VEX_3ADF): Likewise.
1353 (VEX_LEN_3ADF_P_2): Likewise.
1354 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1355 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1356 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1357 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1358 PREFIX_VEX_3896...PREFIX_VEX_389F,
1359 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1360 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1361 (vex_table): Likewise.
1362 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1363 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1364 (putop): Support "%XW".
1365 (intel_operand_size): Handle vex_w_dq_mode.
1367 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1369 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1370 instructions. Add new FMA instructions.
1371 * i386-tbl.h: Regenerated.
1373 2009-01-02 Matthias Klose <doko@ubuntu.com>
1375 * or32-opc.c (or32_print_register, or32_print_immediate,
1376 disassemble_insn): Don't rely on undefined sprintf behaviour.
1378 For older changes see ChangeLog-2008
1384 version-control: never