1 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
5 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
8 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
10 * mips16-opc.c: Add "abs".
13 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
15 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
16 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
17 (disassembler): Add bfd_arch_tic80 support to set disassemble
19 * tic80-dis.c (print_insn_tic80): Add stub.
21 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
23 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
24 * configure: Regenerate with autoconf.
25 * tic80-dis.c: Add file.
26 * tic80-opc.c: Add file.
30 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
32 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
35 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
37 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
38 (mn10200_opcodes): Use it for some logicals and btst insns.
39 Add "break" and "trap" instructions.
41 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
43 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
45 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
47 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
48 relative load or add now depends upon whether the instruction is
51 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
53 * mn10200-dis.c: Finish writing disassembler.
54 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
55 Fix mask for "jmp (an)".
57 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
58 handle endianness issues for mn10300.
60 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
62 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
64 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
65 instruction. Fix opcode field for "movb (imm24),dn".
67 * mn10200-opc.c (mn10200_operands): Fix insertion position
70 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
72 * mn10200-opc.c: Create mn10200 opcode table.
73 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
74 but moving along nicely.
76 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
78 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
80 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
82 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
83 specifiers for fmovem* instructions.
85 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
87 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
89 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
91 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
94 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
96 * mn10300-opc.c: Add some comments explaining the various
99 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
101 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
103 * m68k-dis.c (print_insn_arg): Handle new < and > operand
106 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
107 operand specifiers in fmovm* instructions.
109 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
111 * ppc-opc.c (insert_li): Give an error if the offset has the two
112 least significant bits set.
114 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
116 * mips-dis.c (print_insn_mips16): Separate the instruction from
117 the arguments with a tab, not a space.
119 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
121 * mn10300-dis.c (disasemble): Finish conversion to '$' as
124 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
127 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
129 * configure: Rebuild with autoconf 2.12.
131 Add support for mips16 (16 bit MIPS implementation):
132 * mips16-opc.c: New file.
133 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
134 (mips16_reg_names): New static array.
135 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
136 after seeing a 16 bit symbol.
137 (print_insn_little_mips): Likewise.
138 (print_insn_mips16): New static function.
139 (print_mips16_insn_arg): New static function.
140 * mips-opc.c: Add jalx instruction.
141 * Makefile.in (mips16-opc.o): New target.
142 * configure.in: Use mips16-opc.o for bfd_mips_arch.
143 * configure: Rebuild.
145 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
147 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
148 operand specifiers in *save, *restore and movem* instructions.
150 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
153 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
154 register operands for immediate arithmetic, not, neg, negx, and
155 set according to condition instructions.
157 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
158 specifier of the effective-address operand in immediate forms of
159 arithmetic instructions. The specifier for the immediate operand
160 notes how and where the constant will be stored.
162 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
164 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
167 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
170 * mn10300-dis.c (disassemble): Prefix registers with '%'.
172 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
174 * mn10300-dis.c (disassemble): Handle register lists.
176 * mn10300-opc.c: Fix handling of register list operand for
177 "call", "ret", and "rets" instructions.
179 * mn10300-dis.c (disassemble): Print PC-relative and memory
180 addresses symbolically if possible.
181 * mn10300-opc.c: Distinguish between absolute memory addresses,
182 pc-relative offsets & random immediates.
184 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
186 (disassemble): Handle SPLIT and EXTENDED operands.
188 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
190 * mn10300-dis.c: Rough cut at printing some operands.
192 * mn10300-dis.c: Start working on disassembler support.
193 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
195 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
197 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
200 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
202 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
205 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
207 * mn10300-opc.c (mn10300_opcodes): Demand parens around
208 register argument is calls and jmp instructions.
210 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
212 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
213 getx operand. Fix opcode for mulqu imm,dn.
215 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
217 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
218 in MN10300_OPERAND_SPLIT operands for how many bits
219 appear in the basic insn word. Add IMM32_HIGH24,
220 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
221 (mn10300_opcodes): Use new operands as needed.
223 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
224 for bset, bclr, btst instructions.
225 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
227 * mn10300-opc.c (mn10300_operands): Remove many redundant
228 operands. Update opcode table as appropriate.
229 (IMM32): Add MN10300_OPERAND_SPLIT flag.
230 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
232 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
234 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
235 operands (for indexed load/stores). Fix bitpos for DI
236 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
237 few instructions that insert immediates/displacements in the
238 middle of the instruction. Add IMM8E for 8 bit immediate in
239 the extended part of an instruction.
240 (mn10300_operands): Use new opcodes as appropriate.
243 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
245 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
246 sequential so the assembler never parallelizes it with
250 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
252 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
253 a data/address register that appears in register field 0
254 and register field 1.
255 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
257 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
259 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
260 standard disassembly.
262 * alpha-opc.c (alpha_operands): Rearrange flags slot.
263 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
264 Recategorize PALcode instructions.
267 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
269 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
272 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
274 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
275 there are no operand types.
278 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
280 * v850-opc.c (D9_RELAX): Renamed from D9, all references
282 (v850_operands): Make sure D22 immediately follows D9_RELAX.
285 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
287 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
290 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
292 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
293 and sst.w instructions.
295 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
299 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
301 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
304 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
306 * ppc-opc.c (PPCPWR2): Define.
307 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
310 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
312 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
313 field for movhu instruction.
316 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
317 cast value to "long" not "signed long" to keep hpux10
321 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
323 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
326 * mn10300-opc.c (FMT*): Remove definitions.
328 * mn10300-opc.c (mn10300_opcodes): Fix destination register
329 for shift-by-register opcodes.
331 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
332 into [AD][MN][01] for encoding the position of the register
335 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
337 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
338 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
340 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
342 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
343 Fix various typos. Add "PAREN" operand.
345 (mn10300_opcodes): Surround all memory addresses with "PAREN"
346 operands. Fix several typos.
348 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
351 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
353 * mn10300-opc.c (FMT_XX): Renumber starting at one.
354 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
356 (mn10300_opcodes): Break opcode format out into its own field.
357 Update many operand fields to deal with signed vs unsigned
358 issues. Fix one or two typos in the "mov" instruction
359 opcode, mask and/or operand fields.
361 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
363 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
366 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
368 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
369 all opcodes. Very rough cut at operands for all opcodes.
371 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
374 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
376 * mn10200-opc.c, mn10300-opc.c: New files.
377 * mn10200-dis.c, mn10300-dis.c: New files.
378 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
379 * disassemble.c: Break mn10x00 support into 10200 and 10300
381 * configure.in: Likewise.
382 * configure: Rebuilt.
384 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
386 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
388 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
390 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
392 * disassemble (ARCH_mn10x00): Define.
393 (disassembler): Handle bfd_arch_mn10x00.
394 * configure.in: Recognize bfd_mn10x00_arch.
395 * configure: Rebuilt.
397 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
399 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
400 accordingly. Don't declare functions using op_rtn.
403 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
405 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
406 params to be more standard.
407 * (disassemble): Print absolute addresses and symbolic names for
408 branch and jump targets.
409 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
411 * (v850_opcodes): Add breakpoint insn.
414 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
416 * m68k-opc.c: Move the fmovemx data register cases before the
417 other cases, so that they get recognized before the data register
418 does gets treated as a degenerate register list.
420 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
422 * mips-opc.c: Add a case for "div" and "divu" with two registers
423 and a destination of $0.
425 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
427 * mips-dis.c (print_insn_arg): Add prototype.
428 (_print_insn_mips): Ditto.
430 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
432 * mips-dis.c (print_insn_arg): Print condition code registers as
435 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
437 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
440 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
442 * v850-dis.c (disassemble): Make static. Provide prototype.
444 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
446 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
449 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
451 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
452 ']' characters into the output stream.
453 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
454 Add "memop" field to all opcodes (for the disassembler).
455 Reorder opcodes so that "nop" comes before "mov" and "jr"
458 * v850-dis.c (print_insn_v850): Fix typo in last change.
460 * v850-dis.c (print_insn_v850): Properly handle disassembling
461 a two byte insn at the end of a memory region when the memory
462 region's size is only two byte aligned.
464 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
466 * v850-dis.c (v850_reg_names): Define.
467 (v850_sreg_names, v850_cc_names): Likewise.
468 (disassemble): Very rough cut at printing operands (unformatted).
470 * v850-opc.c (BOP_MASK): Fix.
471 (v850_opcodes): Fix mask for jarl and jr.
473 * v850-dis.c: New file. Skeleton for disassembler support.
474 * Makefile.in Remove v850 references, they're not needed here
475 and they weren't being sanitized away.
476 * configure.in: Add v850-dis.o when building v850 toolchains.
477 * configure: Rebuilt.
478 * disassemble.c (disassembler): Call v850 disassembler.
480 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
481 (insert_d8_6, extract_d8_6): New functions.
482 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
483 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
485 (IF4A, IF4B): Use "D7" instead of "D7S".
486 (IF4C, IF4D): Use "D8_7" instead of "D8".
487 (IF4E, IF4F): New. Use "D8_6".
488 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
489 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
491 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
492 (v850_operands): Change D16 to D16_15, use special insert/extract
493 routines. New new D16 that uses the generic insert/extract code.
494 (IF7A, IF7B): Use D16_15.
495 (IF7C, IF7D): New. Use D16.
496 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
498 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
499 message. Issue an error if the branch offset is odd.
501 * v850-opc.c: Add notes about needing special insert/extract
502 for all the load/store insns, except "ld.b" and "st.b".
504 * v850-opc.c (insert_d22, extract_d22): New functions.
505 (v850_operands): Use insert_d22 and extract_d22 for
507 (insert_d9): Fix range check.
509 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
511 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
512 and set bits field to D9 and D22 operands.
514 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
516 * v850-opc.c (v850_operands): Define SR2 operand.
517 (v850_opcodes): "ldsr" uses R1,SR2.
519 * v850-opc.c (v850_opcodes): Fix opcode specs for
520 sld.w, sst.b, sst.h, sst.w, and nop.
522 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
524 * v850-opc.c (v850_opcodes): Add null opcode to mark the
525 end of the opcode table.
529 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
531 * d10v-opc.c (pre_defined_registers): Added register pairs,
532 "r0-r1", "r2-r3", etc.
536 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
538 * v850-opc.c (v850_operands): Make I16 be a signed operand.
539 Create I16U for an unsigned 16bit mmediate operand.
540 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
542 * v850-opc.c (v850_operands): Define EP operand.
543 (IF4A, IF4B, IF4C, IF4D): Use EP.
545 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
546 with immediate operand, "movhi". Tweak "ldsr".
548 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
549 correct. Get sld.[bhw] and sst.[bhw] closer.
551 * v850-opc.c (v850_operands): "not" is a two byte insn
553 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
555 * v850-opc.c (v850_operands): D16 inserts at offset 16!
557 * v850-opc.c (two): Get order of words correct.
559 * v850-opc.c (v850_operands): I16 inserts at offset 16!
561 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
562 register source and destination operands.
563 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
565 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
566 same thinko in "trap" opcode.
568 * v850-opc.c (v850_opcodes): Add initializer for size field
571 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
572 Add D8 for 8-bit unsigned field in short load/store insns.
573 (IF4A, IF4D): These both need two registers.
574 (IF4C, IF4D): Define. Use 8-bit unsigned field.
575 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
576 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
577 for "ldsr" and "stsr".
578 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
581 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
582 short store word (sst.w).
584 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
586 * v850-opc.c (v850_operands): Added insert and extract fields,
587 pointers to functions that handle unusual operand encodings.
589 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
591 * v850-opc.c (v850_opcodes): Enable "trap".
593 * v850-opc.c (v850_opcodes): Fix order of displacement
594 and register for "set1", "clr1", "not1", and "tst1".
596 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
598 * v850-opc.c (v850_operands): Add "B3" support.
599 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
602 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
604 * v850-opc.c: Close unterminated comment.
606 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
608 * v850-opc.c (v850_operands): Add flags field.
609 (v850_opcodes): add move opcodes.
611 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
613 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
614 * configure: (bfd_v850v_arch) Add new case.
615 * configure.in: (bfd_v850_arch) Add new case.
616 * v850-opc.c: New file.
619 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
621 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
624 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
626 * d10v-opc.c: Add additional information to the opcode
627 table to help determinine which instructions can be done
631 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
633 * mpw-make.sed: Update editing of include pathnames to be
636 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
638 * arm-opc.h: Added "bx" instruction definition.
640 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
642 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
645 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
647 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
649 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
651 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
654 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
656 * makefile.vms: Update for alpha-opc changes.
658 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
660 * i386-dis.c (print_insn_i386): Actually return the correct value.
661 (ONE, OP_ONE): #ifdef out; not used.
664 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
666 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
667 Changed subi operand type to treat 0 as 16.
670 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
672 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
675 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
677 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
678 memory transfer instructions. Add new format string entries %h and %s.
679 * arm-dis.c: (print_insn_arm): Provide decoding of the new
683 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
685 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
686 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
689 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
691 * alpha-dis.c (print_insn_alpha_osf): Remove.
692 (print_insn_alpha_vms): Remove.
693 (print_insn_alpha): Make globally visible. Chose the register
694 names based on info->flavour.
695 * disassemble.c: Always return print_insn_alpha for the alpha.
698 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
700 * d10v-dis.c (dis_long): Handle unknown opcodes.
702 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
704 * d10v-opc.c: Changes to support signed and unsigned numbers.
705 All instructions with the same name that have long and short forms
706 now end in ".l" or ".s". Divs added.
707 * d10v-dis.c: Changes to support signed and unsigned numbers.
709 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
711 * d10v-dis.c: Change all functions to use info->print_address_func.
714 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
716 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
717 move ccr/sr insns more strict so that the disassembler only
718 selects them when the addressing mode is data register.
721 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
722 * d10v-opc.c (pre_defined_registers): Declare.
723 * d10v-dis.c (print_operand): Now uses pre_defined_registers
724 to pick a better name for the registers.
727 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
729 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
730 operands for fexpand and fpmerge. From Christian Kuehnke
731 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
733 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
735 * alpha-dis.c (print_insn_alpha): No longer the user-visible
736 print routine. Take new regnames and cpumask arguments.
737 Kill the environment variable nonsense.
738 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
739 (print_insn_alpha_vms): New function. Do VMS style regnames.
740 * disassemble.c (disassembler): Test bfd flavour to pick
741 between OSF and VMS routines. Default to OSF.
743 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
745 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
746 * configure: Rebuild.
747 * Makefile.in (install): Use @INSTALL_SHLIB@.
750 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
752 * configure: (bfd_d10v_arch) Add new case.
753 * configure.in: (bfd_d10v_arch) Add new case.
754 * d10v-dis.c: New file.
755 * d10v-opc.c: New file.
756 * disassemble.c (disassembler) Add entry for d10v.
759 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
761 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
762 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
764 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
766 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
767 distinguish between variants of the instruction set.
768 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
769 distinguish between variants of the instruction set.
771 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
773 * i386-dis.c (print_insn_i8086): New routine to disassemble using
774 the 8086 instruction set.
775 * i386-dis.c: General cleanups. Make most things static. Add
776 prototypes. Get rid of static variables aflags and dflags. Pass
777 them as args (to almost everything).
779 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
781 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
783 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
785 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
786 if the next arg is marked with SRC_IN_DST. Gross.
788 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
789 we're looking for and find EXR.
791 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
792 if we're looking for KBIT and we don't find it.
794 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
797 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
798 3bit immediate operands.
800 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
802 * Released binutils 2.7.
804 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
805 <kkaempf@progis.ac-net.de>.
807 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
809 * alpha-opc.c: Correct second case of "mov" to use OPRL.
811 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
813 * sparc-dis.c (print_insn_sparclite): New routine to print
814 sparclite instructions.
816 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
818 * m68k-opc.c (m68k_opcodes): Add coldfire support.
820 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
822 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
823 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
824 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
826 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
828 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
829 Use autoconf-set values.
830 (docdir, oldincludedir): Removed.
831 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
833 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
835 * alpha-opc.c: New file.
836 * alpha-opc.h: Remove.
837 * alpha-dis.c: Complete rewrite to use new opcode table.
838 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
839 * configure: Rebuild with autoconf 2.10.
840 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
841 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
843 (alpha-opc.o): New target.
845 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
847 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
848 Set imm_added_to_rs1 even if the source and destination register
851 * sparc-opc.c: Add some two operand forms of the wr instruction.
853 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
855 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
858 * disassemble.c (disassembler): Handle H8/S.
859 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
861 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
863 * sparc-opc.c: Add beq/teq as aliases for be/te.
865 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
866 <sergei@msil.sps.mot.com>.
868 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
870 * makefile.vms: New file.
872 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
874 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
876 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
879 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
881 * i386-dis.c (OP_OFF): Call append_prefix.
883 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
885 * ppc-opc.c (instruction encoding macros): Add explicit casts to
886 unsigned long to silence a warning from the Solaris PowerPC
889 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
891 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
893 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
895 * sparc-dis.c (X_IMM,X_SIMM): New macros.
897 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
898 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
899 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
900 cpush, cpusha, cpull sparclet insns.
902 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
904 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
906 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
908 * sparc-opc.c: Set F_FBR on floating point branch instructions.
909 Set F_FLOAT on other floating point instructions.
911 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
913 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
915 (powerpc_opcodes): Add 860/821 specific SPRs.
917 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
919 * configure.in: Permit --enable-shared to specify a list of
920 directories. Set and substitute BFD_PICLIST.
921 * configure: Rebuild.
922 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
923 uses. Set to @BFD_PICLIST@.
925 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
927 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
928 not "abs", which may be needed for the absolute in something
929 like btst #0,@10:8. Print L_3 immediates separately from other
930 immediates. Change ABSMOV reference to ABS8MEM.
932 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
934 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
935 (current_arch_mask): New static global.
936 (compute_arch_mask): New static function.
937 (print_insn_sparc): Delete sparc_v9_p. New static local
938 current_mach. Resort opcode table if current_mach changes.
939 Generalize "insn not supported" test.
940 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
941 Delete test for v9/!v9.
942 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
944 (brfc): Split into CBR and FBR for coprocessor/fp branches.
945 (brfcx): Renamed to FBRX.
946 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
947 coprocessor mnemonics are not supported on the sparclet).
948 (condf): Renamed to CONDF.
949 (SLCBCC2): Delete F_ALIAS flag.
951 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
953 * sparc-opc.c (sparc_opcodes): rd must be 0 for
954 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
956 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
958 * Makefile.in (config.status): Depend upon BFD VERSION file, so
959 that the shared library version number is set correctly.
961 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
963 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
964 Miles Bader <miles@gnu.ai.mit.edu>.
965 * configure: Rebuild.
967 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
969 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
972 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
974 * configure: Rebuild with autoconf 2.8.
976 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
978 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
979 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
981 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
983 * configure.in: Don't set SHLIB or SHLINK to an empty string,
984 since they appear as targets in Makefile.in.
985 * configure: Rebuild.
987 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
989 * mpw-make.sed: Edit out shared library support bits.
991 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
993 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
994 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
995 (sparc_opcodes): Add sparclet insns.
996 (sparclet_cpreg_table): New static local.
997 (sparc_{encode,decode}_sparclet_cpreg): New functions.
998 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1000 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1002 * i386-dis.c (index16): New static variable.
1003 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1005 (OP_indirE): Return result of OP_E.
1006 (OP_E): Check for 16 bit addressing mode, and disassemble
1007 correctly. Optimised 32 bit case a little. Don't print
1008 "(base,index,scale)" when sib specifies only an offset.
1010 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1012 * configure.in: Set and substitute SHLIB_DEP.
1013 * configure: Rebuild.
1014 * Makefile.in (SHLIB_DEP): New variable.
1015 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1016 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1017 COMMON_SHLIB, add them to piclist with appropriate modifications.
1018 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1019 here: just use piclist.
1021 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1023 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1024 (print_insn_sparc): Rewrite v9/not-v9 tests.
1025 (compare_opcodes): Likewise.
1026 * sparc-opc.c (MASK_<ARCH>): Define.
1027 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1028 (sparclet,v6notv9): Define.
1029 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1030 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1032 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1034 * configure.in: Call AC_PROG_CC before configure.host.
1035 * configure: Rebuild.
1037 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1039 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1041 * i386-dis.c (onebyte_has_modrm): New static array.
1042 (twobyte_has_modrm): New static array.
1043 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1045 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1047 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1050 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1052 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1055 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1057 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1058 m68010up, not just m68020up | cpu32.
1060 * Makefile.in (SONAME): New variable.
1061 ($(SHLINK)): Make a link to the transformed name, as well.
1062 (stamp-tshlink): New target.
1063 (install): Skip stamp-tshlink during install.
1065 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1067 * configure.in: Call AC_ARG_PROGRAM.
1068 * configure: Rebuild.
1069 * Makefile.in (program_transform_name): New variable.
1070 (install): Transform library name before installing it.
1072 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1074 * i960-dis.c (mem): Add HX dcinva instruction.
1076 Support for building as a shared library, based on patches from
1077 Alan Modra <alan@spri.levels.unisa.edu.au>:
1078 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1079 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1080 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1081 * configure: Rebuild.
1082 * Makefile.in (ALLLIBS): New variable.
1083 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1084 (COMMON_SHLIB, SHLINK): New variables.
1085 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1086 (STAGESTUFF): Remove variable.
1087 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1088 (stamp-piclist, piclist): New targets.
1089 ($(SHLIB), $(SHLINK)): New targets.
1090 ($(OFILES)): Depend upon stamp-picdir.
1091 (disassemble.o): Build twice if PICFLAG is set.
1092 (MOSTLYCLEAN): Add pic/*.o.
1093 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1094 (distclean): Remove pic and stamp-picdir.
1095 (install): Install shared libraries.
1096 (stamp-picdir): New target.
1098 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1100 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1101 Print unknown instruction as "unknown", rather than in hex.
1103 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1105 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1107 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1109 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1111 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1113 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1114 when necessary. From Ulrich Drepper
1115 <drepper@myware.rz.uni-karlsruhe.de>.
1117 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1119 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1120 sparc_num_opcodes. Update architecture enum values.
1121 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1122 (sparc_opcode_lookup_arch): New function.
1123 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1124 (sparc_opcodes): Add v9a shutdown insn.
1126 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1128 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1129 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1131 (print_insn_sparc64): Deleted.
1132 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1135 * sparc-opc.c (architecture_pname): Add v9a.
1137 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1139 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1140 incorrectly defined as 0x16 when it should be 0x15.
1141 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1142 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1143 excb (exception barrier) which is defined in the Alpha
1144 Architecture Handbook version 2.
1145 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1146 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1147 disassembled as or, for example.
1149 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1151 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1152 (_print_insn_mips): Change i from int to unsigned int.
1154 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1156 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1157 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1159 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1161 * i386-dis.c: Added Pentium Pro instructions.
1163 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1165 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1168 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1170 * sh-opc.h (sh_nibble_type): Added REG_B.
1171 (sh_arg_type): Added A_REG_B.
1172 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1174 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1176 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1178 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1180 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1182 * Makefile.in (distclean): Remove stamp-h. From Ronald
1183 F. Guilmette <rfg@monkeys.com>.
1185 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1187 From David Mosberger-Tang <davidm@azstarnet.com>:
1188 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1191 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1193 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1194 (sh_table): Added many SH3 opcodes.
1195 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1197 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1199 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1200 (subco,subco.): Mark this PPC, not PPCCOM.
1202 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1204 * configure: Rebuild with autoconf 2.7.
1206 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1208 * configure: Rebuild with autoconf 2.6.
1210 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1212 * configure.in: Sort list of architectures. Accept but do nothing
1213 for alliant, convex, pyramid, romp, and tahoe.
1215 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1217 * a29k-dis.c (print_special): Change num to unsigned int.
1219 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1221 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1224 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1226 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1227 * configure: Rebuilt.
1229 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1231 * configure.in: Add case for bfd_i860_arch.
1232 * configure: Rebuild.
1234 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1236 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1237 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1238 (NEXTDOUBLE): Likewise.
1239 (print_insn_m68k): Don't match fmoveml if there is more than one
1240 register in the list.
1241 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1243 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1245 * m68k-opc.c: Use #W rather than #w.
1246 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1248 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1250 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1251 and likewise for all the dbxx opcodes.
1253 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1255 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1257 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1259 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1260 the VR4100 specific instructions to the mips_opcodes structure.
1262 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1264 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1265 ugly Metrowerks bug in CW6, is fixed in CW7.
1267 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1269 * ppc-opc.c (whole file): Add flags for common/any support.
1271 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1273 * Makefile.in (BISON): Remove macro.
1274 (FLAGS_TO_PASS): Remove BISON.
1276 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1278 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1280 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1281 instructions that take no args by looking at the match mask.
1282 (print_insn_arg): Always print "%" before register names.
1283 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1284 [case '_']: Don't print "@#" before address.
1285 [case 'J']: Use "%s" as format string, not register name.
1286 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1288 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1290 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1293 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1295 From David Mosberger-Tang <davidm@azstarnet.com>
1297 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1298 (alpha_insn_set): added definitions for VAX floating point
1299 instructions (Unix compilers don't generate these, but handcoded
1300 assembly might still use them).
1302 * alpha-dis.c (print_insn_alpha): added support for disassembling
1303 the miscellaneous instructions in the Alpha instruction set.
1305 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1307 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1308 no longer create sysdep.h, sed ppc-opc.c to work around a
1309 serious Metrowerks C bug.
1310 * mpw-make.in: Remove.
1311 * mpw-make.sed: New file, used by mpw-configure to edit
1312 Makefile.in into an MPW makefile.
1314 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1316 * Makefile.in (maintainer-clean): New synonym for realclean.
1318 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1320 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1321 which use '0', '1', and '2' instead. Specify the proper size for
1322 a pmove immediate operand. Correct the pmovefd patterns to be
1323 moves to a register, not from a register.
1324 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1326 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1328 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1329 %psr, %wim, %tbr as F_NOTV9.
1331 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1333 * Makefile.in (Makefile): Just rebuild Makefile when running
1335 (config.h, stamp-h): New targets.
1336 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1337 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1338 rebuilding config.h.
1339 * configure: Rebuild.
1341 * mips-opc.c: Change unaligned loads and stores with "t,A"
1342 operands to use "t,A(b)".
1344 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1346 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1348 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1350 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1351 until 3 instead of until 2.
1353 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1355 * Makefile.in (ALL_CFLAGS): Define.
1356 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1357 (MOSTLYCLEAN): Add config.log.
1358 (distclean): Don't remove config.log.
1359 * configure.in: Substitute HDEFINES.
1360 * configure: Rebuild.
1362 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1364 * sh-opc.h (sh_arg_type): Add F_FR0.
1365 (sh_table, case fmac): Add F_FR0 as first argument.
1367 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1369 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1371 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1373 * sparc-dis.c: Remove all references to NO_V9.
1375 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1377 * aclocal.m4: Just include ../bfd/aclocal.m4.
1378 * configure: Rebuild.
1380 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1382 * sparc-dis.c (X_DISP19): Define.
1383 (print_insn, case 'G'): Use it.
1384 (print_insn, case 'L'): Sign extend displacement.
1386 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1388 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1389 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1390 host_makefile_frag or frags.
1391 * aclocal.m4: New file.
1392 * configure: Rebuild.
1393 * Makefile.in (INSTALL): Set to @INSTALL@.
1394 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1395 (INSTALL_DATA): Set to @INSTALL_DATA@.
1397 (AR_FLAGS): Set to rc rather than qc.
1398 (CC): Define as @CC@.
1399 (CFLAGS): Set to @CFLAGS@.
1400 (@host_makefile_frag@): Remove.
1401 (config.status): Remove dependency upon @frags@.
1403 * configure.in: ../bfd/config.bfd now just sets shell variables.
1404 Use them rather than looking through target Makefile fragments.
1405 * configure: Rebuild.
1407 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1409 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1411 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1413 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1414 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1417 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1418 (lookup_{name,value}): New functions.
1419 (prefetch_table): New static local.
1420 (sparc_{encode,decode}_prefetch): New functions.
1421 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1423 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1425 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1428 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1430 * sh-dis.c: Correct comment on first line of file.
1432 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1434 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1436 * sparc-opc.c (asi, membar): New static locals.
1437 (sparc_{encode,decode}_{asi,membar}): New functions.
1438 (sparc_opcodes, membar insn): Fix.
1439 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1440 Support decoding of membar masks.
1443 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1445 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1447 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1449 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1450 and likewise for the other branches. Add bhs as an alias for bcc,
1451 and likewise for the size variants. Add dbhs as an alias for
1454 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1456 * sh-opc.h (FP sts instructions): Update to match reality.
1458 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1460 * m68k-dis.c: (fpcr_names): Add % before all register names.
1461 (reg_names): Likewise.
1462 (print_insn_arg): Don't explicitly print % before register names.
1463 Add % before register names in static array names. In case 'r',
1464 print data registers as `@(Dn)', not `Dn@'. When printing a
1465 memory address, don't print @# before it.
1466 (print_indexed): Change base_disp and outer_disp from int to
1467 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1468 syntax. Sign extend 8 byte displacement correctly.
1469 (print_base): Print using MIT syntax. Print zpc when appropriate.
1470 Change parameter disp from int to bfd_vma.
1472 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1475 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1477 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1478 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1479 * sh-opc.h (sh_arg_type): Add new operand types.
1480 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1482 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1484 * Makefile.in (distclean): Remove generated file config.h.
1486 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1488 * Makefile.in (distclean): Remove generated file config.h.
1490 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1492 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1494 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1496 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1497 rather than numopcodes. Use m68k_opcodes rather than removed
1498 opcode function. Don't check F_ALIAS.
1499 (print_insn_arg): Change first parameter to be const char *.
1500 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1501 (m68k-opc.o): New target.
1502 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1503 * configure: Rebuild.
1505 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1507 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1508 (opcode_bits, opcode_hash_table): New variables.
1509 (opcodes_initialized): Renamed from opcodes_sorted.
1510 (build_hash_table): New function.
1511 (is_delayed_branch): Use hash table.
1512 (print_insn): Renamed from print_insn_sparc, made static.
1513 Build and use hash table. If !sparc64, ignore sparc64 insns,
1514 and vice-versa if sparc64.
1515 (print_insn_sparc, print_insn_sparc64): New functions.
1516 (compare_opcodes): Move sparc64 opcodes to end.
1517 Print commutative insns with constant second.
1518 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1520 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1522 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1523 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1524 avoids printing a delay slot in a delay slot.
1525 * sh-opc.h (sh_table): Fully bracket last entry.
1527 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1529 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1531 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1533 * configure.in: Get host_makefile_frag from ${srcdir}.
1535 * configure.in: Autoconfiscated. Check for string[s].h. Create
1536 config.h from config.in. Don't set up sysdep.h link.
1537 * sysdep.h: New file.
1538 * configure, config.in: New files, generated from configure.in.
1539 * Makefile.in: Updated to be processed autoconf-style.
1540 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1541 (Makefile): Depend on config.status.
1542 (config.status): New rule.
1543 * configure.bat: Update Makefile substitutions.
1545 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1547 * mips-opc.c (L1): Define.
1548 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1549 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1552 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1554 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1555 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1556 have multiple add units but only a single logical unit.
1558 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1559 shifted by 18, without any insertion or extraction function.
1560 (insert_cr, extract_cr): Remove.
1563 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1565 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1568 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1570 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1573 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1575 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1576 * sh-opc.h: Add copyright.
1578 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1580 * Makefile.in (crunch-m68k): Delete extra target accidentally
1581 checked in a while ago.
1583 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1585 * sh-opc.h (sh_table): Add SH3 support.
1587 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1589 * sh-opc.h: Added bsrf and braf.
1591 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1593 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1594 bogus [ls]fm{ea,fd} patterns.
1596 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1597 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1598 initialize it from memory. Make function static.
1599 (print_insn_{big,little}_arm): New functions.
1600 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1601 the correct endianness.
1604 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1606 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1607 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1610 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1612 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1615 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1617 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1618 17th, so that it builds again using GCC as the compiler.
1620 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1622 * mips-dis.c (print_insn_little_mips): Cast return value from
1623 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1624 expects an unsigned long, and that might be fewer words of
1625 argument storage (e.g., if bfd_vma is long long on a 32-bit
1627 (print_insn_big_mips): Likewise with bfd_getb32 value.
1628 (_print_insn_mips): Now static.
1630 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1632 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1633 gcc memory hog problem with initializer is fixed.
1636 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1638 * arc-opc.c (NULL): Define.
1639 (arc_operands, insn fields u,s): Delete.
1640 (arc_operands, insn fields a,b,c): Mark as signed.
1641 (arc_opcodes): No longer const, links computed at run-time.
1642 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1643 suffixes that affect the insn code.
1644 (arc_opcodes): Resort table to macros are first.
1645 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1646 (arc_opcodes, st [b] entry): Likewise.
1647 (arc_opcodes, st [b,d] entry): Fix mask, value.
1648 (arc_reg_names): Add entries for r29, r30, r31, r60.
1649 (opcode_map, icode_map): New static globals.
1650 (arc_opcode_init_tables): Initialize them.
1651 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1652 (insert_shimmoffset): Signal error if register present.
1654 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1657 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1659 Merge in support for Mac MPW as a host.
1660 (Old change descriptions retained for informational value.)
1662 * mpw-config.in (archname): Compute from the config.
1663 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1665 * mpw-config.in (target_arch): Compute from canonical target.
1666 (m68k, mips, powerpc, sparc): Add architectures.
1667 * mpw-make.in (disassemble.c.o): Add.
1668 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1670 * mpw-config.in (BFD_MACHINES): Set to a default value.
1671 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1673 * mpw-make.in (CSEARCH): Add extra-include to search path.
1675 * mpw-config.in (varargs.h): Don't create.
1676 (sysdep.h): Create using forward-include.
1677 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1679 * mpw-config.in: New file, MPW version of configure.in.
1680 * mpw-make.in: New file, MPW version of Makefile.in.
1683 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1685 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1686 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1687 (print_insn_*): Pass bfd mach number, not opcode version.
1688 * arc-opc.c (arc_get_opcode_mach): New function.
1691 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1693 * alpha-dis.c (print_insn_alpha): Put empty statement after
1696 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1698 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1699 (low_sign_extend): Likewise.
1700 (get_field): Delete unused function.
1701 (set_field, deposit_14, deposit_21): Likewise.
1703 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1705 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1708 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1710 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1712 * alpha-opc.h (OSF_ASMCODE): define
1713 print pal-code names as defined in App C of the
1714 Alpha Architecture Reference Manual
1716 * alpha-dis.c: cleaned up output
1717 print stylized code forms as defined in App A.4.3 of the
1718 Alpha Architecture Reference Manual
1720 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1722 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1724 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1727 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1729 * m68k-dis.c (opcode): New function. Returns address of opcode
1730 table entry given index, even if the opcode table was split to
1731 work around gcc bugs.
1732 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1734 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1735 (reg_names): Now const.
1736 (print_insn_arg): Arrays cacheFieldName and names now const.
1737 (print_indexed): Array scales now const.
1740 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1742 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1743 (print_insn_arc_{host,graphics,audio}): Likewise.
1744 (print_insn): Add prototype.
1745 (arc_get_disassembler): New arg `big_p'. Return little or big
1746 print fn accordingly.
1747 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1748 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1749 (arc_opval_supported): Likewise.
1750 * disassemble.c (disassembler): Pass big endian flag to
1751 arc_get_disassembler.
1754 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1756 * ppc-opc.c: Sort recently added instructions by minor opcode
1757 number within major opcode number.
1759 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1761 * hppa-dis.c: Include libhppa.h.
1763 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1765 * mips-opc.c: Change dli to use M_DLI, and add dla.
1767 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1769 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1772 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1774 * arc-dis.c (arc_get_disassembler): Change argument to int,
1775 one of bfd_mach_arc_xxx. All callers updated.
1778 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1780 * mips-opc.c: Add r4650 mul instruction.
1782 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1784 * mips-opc.c: Add uld and usd macros for unaligned double load and
1787 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1789 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1790 mfdcr, mtdcr, icbt, iccci.
1793 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1795 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1796 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1797 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1798 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1799 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1800 (insert_absaddr): New function.
1802 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1804 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1805 New argument `cpu', pass it to arc_opcode_init_tables.
1806 Document byte order dependencies. Ignore unsupported insns.
1807 (arc_get_disassembler): New function.
1808 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1809 print_insn_arc_audio): New functions.
1810 * arc-opc.c (MULTSHIFT operand): Delete.
1811 (UNSIGNED, SATURATION): New operands.
1812 (mac, mul, mul64, mulu64): New insns.
1813 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1814 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1815 (host,graphics,audio extended and auxiliary regs): Define.
1816 (ss, sc, mh, ml): New suffixes.
1817 (arc_opcode_supported, arc_opval_supported): New functions.
1818 (insert_multshift, extract_multshift): Deleted.
1819 * disassemble.c (disassembler, case bfd_arch_arc): Call
1820 arc_get_disassembler to get disassembler routine.
1823 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1825 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1826 signed char fields to shorts, more portable.
1828 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1830 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1831 char fields as signed chars, since they may have negative values.
1833 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1835 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1836 (mycroft@netbsd.org).
1838 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1840 From "Logg, Ed" <elogg@ea.com>:
1841 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1842 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1845 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1847 * ppc-opc.c: Changes based on patch from David Edelsohn
1848 <edelsohn@mhpcc.edu>.
1849 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1852 (insert_tbr): New static function.
1853 (extract_tbr): New static function.
1854 (XFXFXM_MASK, XFXM): Define.
1855 (XSPRBAT_MASK, XSPRG_MASK): Define.
1856 (powerpc_opcodes): Add instructions to access special registers by
1857 name. Add mtcr and mftbu.
1859 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1861 * mips-opc.c (P3): Define.
1862 (mips_opcodes): Add mad and madu.
1864 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1866 * configure.in: Add W65 support.
1867 * disassemble.c: Likewise.
1868 * w65-opc.h, w65-dis.c: New files.
1870 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1872 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1876 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1878 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1880 * arc-opc.c (extract_reladdr): New function.
1881 (insert_reladdr): Store address right-shifted by 2.
1884 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1886 * mips-opc.c: Add dli as a synonym for li.
1889 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1891 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1893 (extraction fns): Insn argument now array of two words. Return pointer
1894 to value's table entry. All uses changed.
1895 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1896 (insert_multshift, extract_multshift): New fns.
1897 (arc_operands): Add support for cache bypass suffix. Add support for
1898 predefined aux regs. Modifier bits moved to flags field.
1899 (arc_opcodes): Likewise.
1900 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1901 New insn rlc. Update to syntax in programmer's manual.
1902 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1903 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1905 (arc_opcode_init_tables): New argument to indicate cpu type.
1906 (insert_reg): Handle predefined aux regs.
1907 (extract_reg): Likewise.
1908 (lookup_register): New fn.
1909 * arc-dis.c (arc_condition_codes): Deleted.
1910 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1911 Clean up modifier handling. Handle predefined aux regs.
1914 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1916 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1917 print something for reserved opcode values, even if it won't
1920 * mips-dis.c (_print_insn_mips): When initializing, shift right
1921 and mask, to avoid sign extension problems on the Alpha.
1923 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1927 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1929 * configure.in: Add ARC support.
1930 * disassemble.c: Likewise.
1931 * arc-dis.c, arc-opc.c: New files.
1934 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1936 * sh-opc.h (mov.l gbr): Get direction right.
1937 * sh-dis.c (print_insn_shx): New function.
1938 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1939 print opcodes with right byte order.
1941 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1943 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1944 to avoid conflicts with getopt.
1946 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1948 * hppa-dis.c (print_insn_hppa): Read the instruction using
1949 bfd_getb32, so that it works on a little endian or 64 bit host.
1950 Remove unused local variable op.
1952 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1954 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1955 addu does not work correctly if -mips3.
1957 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1959 * a29k-dis.c (print_special): Add special register names defined
1960 on 29030, 29040 and 29050.
1961 (print_insn): Handle new operand type 'I'.
1963 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1965 * Makefile.in (INSTALL): Use top level install.sh script.
1967 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1969 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1970 that it works on a little endian host.
1972 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1974 * configure.in: Use ${config_shell} when running config.bfd.
1976 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1978 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1980 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1982 * a29k-dis.c (print_insn): Print the opcode.
1984 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1986 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1988 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1990 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1992 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1994 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1995 which store a value into memory.
1997 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1999 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2000 * arm-dis.c, arm-opc.h: New files.
2002 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2004 * Makefile.in (ns32k-dis.o): Add dependency.
2005 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2006 string, not as array of chars.
2008 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2010 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2012 * sparc-opc.c: Added sparclite extended FP operations, and
2013 versions of v9 impdep* instructions permitting specification of
2016 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2018 * i960-dis.c (reg_names): Now const.
2019 (struct sparse_tabent): New type, copied from array type in mem
2021 (ctrl): Local static array ctrl_tab now const.
2022 (cobr): Local static array cobr_tab now const.
2023 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2024 static variable mem_tab no longer explicitly initialized. Changed
2025 mem_init to const array of struct sparse_tabent.
2026 (reg): Local static variable reg_tab no longer explicitly
2027 initialized. Changed reg_init to const array of struct
2029 (ea): Local static array scale_tab now const.
2031 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2034 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2036 * configure.bat: the disassember needs to be enabled for
2037 "objdump -d" to work in djgpp.
2039 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2041 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2042 (invalid_float): Enabled general version, doesn't require running
2043 on ns32k host. Changed to take char* argument, and test for
2044 explicitly specified sizes, instead of using sizeof() on host CPU
2046 (INVALID_FLOAT): Cast first argument.
2047 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2048 list_P032, list_M032): Now const.
2049 (optlist, list_search): Made appropriate arguments now point to
2051 (print_insn_arg): Changed static array of one-character-string
2052 pointers into a static const array of characters; fixed sprintf
2053 statement accordingly.
2055 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2057 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2058 from distribution. A ns32k-dis.c from a previous distribution has
2059 been brought up to date and supports the new interface.
2061 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2063 * configure.in: add bfd_ns32k_arch target support.
2065 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2066 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2068 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2070 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2073 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2075 * h8300-dis.c, mips-dis.c: Don't use true and false.
2077 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2079 * configure.in: Change --with-targets to --enable-targets.
2081 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2083 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2084 opcodes to the first instruction with that opcode, to speed
2085 disassembly of large files. From ralphc@pyramid.com (Ralph
2088 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2090 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2092 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2094 * configure.bat: update to latest makefile.in
2096 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2098 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2099 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2100 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2101 slot insn is in a delay slot.
2102 * z8k-opc.h: (resflg): Fix patterns.
2103 * h8500-opc.h Fix CR insn patterns.
2105 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2107 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2108 "cmpl" before POWER versions, so that gas -many uses them.
2110 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2112 * disassemble.c: New file.
2113 * Makefile.in (OFILES): Add disassemble.o.
2114 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2115 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2116 binutils/configure.in.
2118 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2119 opcode being examined.
2121 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2123 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2124 (insert_ral, insert_ram, insert_ras): New functions.
2125 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2126 RAS for store with update.
2128 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2130 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2131 (edelsohn@npac.syr.edu).
2133 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2135 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2138 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2140 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2142 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2144 * ppc-opc.c (powerpc_operands): The signedp field has been
2145 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2146 instead. Add new operand SISIGNOPT.
2147 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2148 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2149 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2152 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2154 * i386-dis.c (struct private): Renamed to dis_private. `private'
2155 is a reserved word for dynix cc.
2157 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2159 * configure.in: Change error message to refer to bfd/config.bfd
2160 rather than bfd/configure.in.
2162 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2164 * ppc-opc.c: Define POWER2 as short alias flag.
2165 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2168 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2170 * i960-dis.c (print_insn_i960): Don't read a second word for
2171 opcodes 0, 1, 2 and 3.
2173 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2175 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2177 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2179 * m68881-ext.c: Removed; no longer used.
2180 * Makefile.in: Changed accordingly.
2182 * m68k-dis.c (ext_format_68881): Don't declare.
2183 (print_insn_m68k): If an instruction uses place 'i', it uses at
2184 least four fixed bytes.
2185 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2186 extended float, convert to double using floatformat_to_double, not
2187 ieee_extended_to_double, and fetch the data before converting it.
2189 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2191 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2192 davidj@ICSI.Berkeley.EDU (David Johnson).
2194 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2196 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2197 PowerPC uses bdnz[l][a].
2199 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2201 * dis-buf.c, i386-dis.c: Include sysdep.h.
2203 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2205 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2207 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2208 by Motorola PowerPC 601 with PPC_OPCODE_601.
2209 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2210 Disassemble Motorola PowerPC 601 instructions as well as normal
2211 PowerPC instructions.
2213 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2215 * i960-dis.c (reg, mem): Just use a static array instead of
2218 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2220 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2221 condition name index if this is for a negated condition.
2223 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2224 Floating point format for 'H' operand is backwards from normal
2225 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2226 operands (fmpyadd and fmpysub), handle bizarre register
2227 translation correctly for single precision format.
2229 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2230 or 'I' operands if the next format specifier is 'M' (fcmp
2231 condition completer).
2233 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2235 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2236 single number giving a bitmask for the MB and ME fields of an M
2237 form instruction. Change NB to accept 32, and turn it into 0;
2238 also turn 0 into 32 when disassembling. Seperated SH from NB.
2239 (insert_mbe, extract_mbe): New functions.
2240 (insert_nb, extract_nb): New functions.
2241 (SC_MASK): Mask out SA and LK bits.
2242 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2243 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2244 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2245 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2246 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2247 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2248 (powerpc_macros): Define table of macro definitions.
2249 (powerpc_num_macros): Define.
2251 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2252 if PPC_OPERAND_NEXT is set.
2254 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2256 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2257 char. Retrieve contents using bfd_getl32 instead of shifting.
2259 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2261 * ppc-opc.c: New file. Opcode table for PowerPC, including
2262 opcodes for POWER (RS/6000).
2263 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2264 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2265 (CFILES): Add ppc-dis.c.
2266 (ppc-dis.o, ppc-opc.o): New targets.
2267 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2269 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2271 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2272 No space before 'u', 'f', or 'N'.
2274 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2276 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2277 farther than we should.
2279 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2281 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2283 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2285 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2287 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2288 needs it, to prevent reading past the end of a section.
2290 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2292 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2293 Removed t,A case for la; always use t,A(b) case.
2295 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2297 From Ted Lemen <mellon@pepper.ncd.com>
2298 * mips-dis.c (print_insn_arg): Handle 'k'.
2299 * mips-opc.c: Make cache use k, not t.
2301 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2303 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2304 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2305 FLOAT_FORMAT_CODE to put out floating point register names.
2307 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2309 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2311 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2313 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2315 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2317 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2318 larger than 32. Moved dsxx32 variants first for disassembler.
2320 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2322 * z8kgen.c, z8k-opc.h: Add full lda information.
2324 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2326 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2327 movb instructions. Any necessary space will be emitted by
2328 the code to handle nullification completers.
2330 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2332 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2334 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2336 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2337 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2339 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2341 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2343 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2345 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2346 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2348 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2350 * m88k-dis.c (m88kdis): comment change. Remove space after
2352 (printop): handle new arg types DEC and XREG for m88110.
2354 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2356 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2357 type for absolute branch addresses. Delete special
2358 "ble" and "be" code in 'W' operand code.
2360 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2362 * mips-opc.c: Set hazard information correctly for branch
2363 likely instructions.
2365 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2367 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2368 info->fprintf_func for printing and info->print_address_func for
2371 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2373 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2375 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2377 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2378 Corrected second case of "b" for disassembler.
2380 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2382 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2383 to BFD swapping routines to correspond to BFD name changes.
2385 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2387 * mips-opc.c: Change div machine instruction to be z,s,t rather
2388 than s,t. Change div macro to be d,v,t rather than d,s,t.
2389 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2390 rem and remu which generates only the corresponding div
2391 instruction. This is for compatibility with the MIPS assembler,
2392 which only generates the simple machine instruction when an
2393 explicit destination of $0 is used.
2394 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2396 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2398 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2399 WR_31 hazard for bal, bgezal, bltzal.
2401 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2403 * hppa-dis.c (print_insn_hppa): Use print function
2404 from within the disassemble_info, not fprintf_filtered.
2406 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2408 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2409 Law, law@cs.utah.edu.)
2411 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2413 * mips-opc.c ("absu"): Removed.
2416 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2418 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2419 Changed hazard information to distinguish between memory load
2420 delays and coprocessor load delays.
2422 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2424 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2426 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2428 * configure.in: Don't pass cpu to config.bfd.
2430 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2432 * m88k-dis.c (m88kdis): Make class unsigned.
2434 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2436 * alpha-dis.c (print_insn_alpha): One branch format case was
2437 missing the instruction name.
2439 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2441 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2442 Add the arch-specific auxiliary files.
2443 (OFILES): Remove the arch-specific auxiliary files
2444 and use BFD_MACHINES instead of DIS_LIBS.
2445 * configure.in: Set BFD_MACHINES based on --with-targets option.
2447 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2449 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2452 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2454 * sparc-opc.c: Change CONST to const to deal with gcc
2455 -Dconst=__const -traditional.
2457 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2459 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2460 coprocessor instructions out of #if 0, and made them use new
2463 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2465 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2467 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2469 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2470 instruction, for use by the disassembler.
2472 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2473 hand-coded sign extensions that depended on 32-bit host ints.
2474 FIXME, we still depend on big-endian host bitfield ordering.
2475 (sparc_print_insn): Set the insn_info_valid field, and the
2476 other fields that describe the instruction being printed.
2478 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2480 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2481 `jmp' instead of just one of them.
2483 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2485 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2486 (fput_fp_reg_r): Renamed from fput_reg_r.
2487 (fput_fp_reg): New function.
2488 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2490 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2492 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2494 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2496 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2498 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2499 don't output a space.
2501 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2503 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2505 * mips-opc.c: New file, containing opcode table from
2506 ../include/opcode/mips.h.
2507 * Makefile.in: Add it.
2509 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2511 * m88k-dis.c: New file, moved in from gdb and changed to use the
2512 new dis-asm.h disassembler interface.
2513 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2514 (m88k-dis.o): New target.
2516 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2518 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2519 argument string const char * to correspond to opcode/mips.h.
2521 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2523 * mips-dis.c: Updated to account for name changes in new version
2525 * Makefile.in: Added header file dependencies.
2527 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2529 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2531 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2533 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2534 extend, rather than shifts.
2536 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2538 * Makefile.in: Undo 15 June change.
2540 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2542 * m68k-dis.c (print_insn_arg): Change return value to byte count
2544 * m68k-dis.c: Re-write to detect invalid operands before
2545 printing anything, so we can handle this the same way we
2546 handle invalid opcodes.
2548 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2550 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2552 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2554 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2557 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2559 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2561 * configure.in: Do make sysdep.h link.
2562 * Makefile.in: Search ../include. Don't search ../bfd.
2564 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2566 Changes from Jeff Law, law@cs.utah.edu:
2567 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2568 Do not print a space before the completers specified by
2571 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2573 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2574 defined, since gdb has been fixed.
2576 Changes from Jeff Law, law@cs.utah.edu:
2577 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2578 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2579 be a *disassemble_info, not a *FILE.
2580 * hppa-dis.c: Support 'd', '!', and 'a'.
2581 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2582 * hppa-dis.c: Delete cases which are no longer needed.
2584 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2586 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2588 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2590 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2593 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2595 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2596 * configure.in: No longer need to configure to get sysdep.h.
2598 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2600 * Patches from Jeffrey Law <law@cs.utah.edu>.
2601 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2602 templates for 1.1 FP computational instructions.
2604 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2606 * h8500-dis.c (print_insn_h8500): Address argument is type
2608 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2611 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2612 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2614 * sparc-dis.c (compare_opcodes): Move static declaration to
2617 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2619 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2620 instruction, remove unimp hack from 'l' argument.
2622 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2624 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2627 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2629 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2630 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2633 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2635 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2636 arrays of string pointers to 2-d arrays of chars, to save
2639 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2641 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2642 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2644 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2646 * hppa-dis.c: New file from Utah, adapted to new disassembler
2648 * Makefile.in: Include it.
2650 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2652 * sh-dis.c, sh-opc.h: New files.
2654 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2656 * alpha-dis.c, alpha-opc.h: New files.
2658 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2660 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2663 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2665 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2667 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2669 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2672 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2674 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2675 and double percent signs a few places.
2677 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2679 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2680 Use info->print_address_func not print_address.
2682 * dis-buf.c (generic_print_address): New function.
2684 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2686 * Makefile.in: Add sparc-dis.c.
2687 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2689 Add `add' instruction to the set that get checked
2690 for a preceding `sethi' in order to print an absolute address.
2691 * (print_insn): Disassembly prefers real instructions.
2692 (is_delayed_branch): Speed up.
2693 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2694 Still missing some float ops, and needs testing.
2695 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2696 F_ALIAS. Use printf, not fprintf, when not passing a file
2698 (compare_opcodes): Check that identical instructions have
2699 identical opcodes, complain otherwise.
2702 * Include reg_names.
2704 Use dis-asm.h/read_memory_func interface.
2706 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2708 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2709 deliberately return non-zero to setjmp from longjmp. Otherwise
2710 this code fails to compile.
2712 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2714 * m68k-dis.c: Fix prototype for fetch_arg().
2716 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2718 * dis-buf.c: New file, for new read_memory_func interface.
2719 Makefile.in (OFILES): Include it.
2720 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2721 Use new read_memory_func interface.
2723 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2725 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2726 * h8500-opc.h: Fix couple of opcodes.
2728 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2730 * Makefile.in: add dvi & installcheck targets
2732 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2734 * Makefile.in: Update for h8500-dis.c.
2736 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2738 * h8500-dis.c, h8500-opc.h: New files
2740 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2742 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2743 ../include/dis-asm.h.
2744 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2745 and ../gdb/m68k-pinsn.c).
2746 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2747 and ../gdb/i386-pinsn.c).
2748 * m68881-ext.c: New file. Moved definition of
2749 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2750 * Makefile.in: Adjust for new files.
2751 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2752 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2753 can be dis-assembled.
2755 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2757 * mips-dis.c (print_insn_arg): Now returns void.
2759 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2761 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2762 files that use the macros.
2764 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2766 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2767 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2768 (CFILES): Added mips-dis.c.
2770 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2772 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2773 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2775 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2777 * Makefile.in: Improve *clean rules.
2778 * configure.in: Allow a default host.
2780 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2782 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2783 files include other sysdep files
2785 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2787 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2789 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2791 * configure.in: For host support, use ../bfd/configure.host
2792 so it stays in sync with the ../bfd/hosts database.
2794 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2796 * configure.in: use cpu-vendor-os triple instead of nested cases
2798 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2800 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2801 *always* the wrong one.
2803 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2805 * z8kgen.c: added copyright info
2807 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2809 * z8k-dis.c (unparse_instr): prettier tabs
2810 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2812 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2814 * configure.in: Add ncr* configuration.
2815 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2816 picayune ANSI compilers happy.
2818 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2820 * configure.in (i386): Make i386 and i486 synonymous for now.
2821 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2823 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2825 * Makefile.in (install): Fix typo.
2827 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2829 * Makefile.in (make): Remove obsolete crud.
2830 (sparc-opc.o): Avoid Sun Make VPATH bug.
2832 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2834 * Makefile.in: since there are no SUBDIRS, remove rule and
2835 references of subdir_do.
2837 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2839 * Makefile.in (install): Get the library name right here too.
2840 Don't install bfd.h, since it's unrelated to this library. No
2841 subdirs to recurse into, either.
2842 (CFILES): The source file has a .c suffix, not .o.
2844 * sparc-opc.c: New file, moved from BFD.
2845 * Makefile.in (OFILES): Build it.
2847 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2849 * z8k-dis.c: fixed forward refferences of some declarations.
2851 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2853 * Makefile.in: get the name of the library right
2855 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2857 * z8k-dis.c: knows how to disassemble z8k stuff
2858 * z8k-opc.h: new file full of z8000 opcodes
2862 version-control: never