opcodes/ChangeLog

   1 start-sanitize-r5900
   2 Mon Jun  1 10:27:26 1998  Jeffrey A Law  (law@cygnus.com)
   3
   4         * vu0.h (sqc2): Fix opcode.
   5
   6         * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
   7         (sqrt.s): Likewise.
   8
   9 end-sanitize-r5900
  10 start-sanitize-vr5400
  11 Thu May 28 08:46:09 1998  Catherine Moore <clm@cygnus.com>
  12
  13        * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
  14        Change pinfo to use WR_HILO.
  15
  16 end-sanitize-vr5400
  17 start-sanitize-d30v
  18 Wed May 27 15:29:13 1998  Nick Clifton  <nickc@cygnus.com>
  19
  20         * d30v-opc.c: Add new operand: Ra3.  Change SHORT_B3, SHORT_B3b,
  21         LONG_2, LONG_2b formats to use this new operand.
  22
  23 end-sanitize-d30v
  24 Tue May 26 20:47:48 1998  Stan Cox  <scox@cygnus.com>
  25
  26         * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
  27
  28 Tue May 26 20:45:33 1998  Mark Alexander  <marka@cygnus.com>
  29
  30         * sparc-dis.c (print_insn_sparc): big endian instruction / little
  31         endian data support.
  32
  33 start-sanitize-d30v
  34 Tue May 26 16:14:39 1998  Nick Clifton  <nickc@cygnus.com>
  35
  36         * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
  37         and SHORT_B3b formats to use Rb instead of Ra.
  38
  39         Add FLAG_MUL16 to MUL2XH opcode.
  40
  41         Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
  42         to existing 1.1.1 parallelisation prohibition procedure.
  43
  44 end-sanitize-d30v
  45 Fri May 22 16:00:00 1998  Doug Evans  <devans@canuck.cygnus.com>
  46
  47         * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
  48         * cgen-dis.in (extract_normal): Likewise.
  49         * m32r-asm.c,m32r-dis.c: Regenerate.
  50
  51 start-sanitize-sky
  52 Fri May 22 11:44:10 1998  Doug Evans  <devans@canuck.cygnus.com>
  53
  54         * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
  55
  56 end-sanitize-sky
  57 start-sanitize-r5900
  58 Wed May 20 00:22:27 1998  Jeffrey A Law  (law@cygnus.com)
  59
  60         * mips-opc.c (multu1): Add two operand variant for the r5900.
  61
  62 end-sanitize-r5900
  63 Tue May 19 17:36:08 1998  Ian Lance Taylor  <ian@cygnus.com>
  64
  65         * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
  66         with a shift count of 0.
  67
  68 start-sanitize-r5900
  69 Mon May 18 14:27:06 1998  Frank Ch. Eigler  <fche@cygnus.com>
  70
  71         * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
  72
  73 Mon May 18 11:44:00 1998  Jeffrey A Law  (law@cygnus.com)
  74
  75         * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
  76         (_print_insn_mips): Likewise.
  77         * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
  78         completers.
  79
  80 end-sanitize-r5900
  81 Fri May 15 14:58:31 1998  Doug Evans  <devans@seba.cygnus.com>
  82
  83         * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
  84         (cgen_hw_lookup_by_num): New function.
  85
  86 start-sanitize-m32rx
  87         * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
  88
  89 end-sanitize-m32rx
  90 Wed May 13 17:03:59 1998  Doug Evans  <devans@canuck.cygnus.com>
  91
  92         * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
  93
  94 Wed May 13 14:34:31 1998  Mark Alexander  <marka@cygnus.com>
  95
  96         * sparc-dis.c (print_insn_sparc): Always fetch instructions
  97         as big-endian on SPARClite.
  98
  99 start-sanitize-m32rx
 100 Tue May 12 13:39:51 1998  Nick Clifton  <nickc@cygnus.com>
 101
 102         * m32r-opc.c: Regenerated - SPECIAL attribute added to some
 103         insns.
 104         * m32r-opc.h: Regenerated - SPECIAL attribute added to some
 105         insns.
 106
 107 end-sanitize-m32rx
 108 start-sanitize-d30v
 109 Tue May 12 11:46:31 1998  Richard Henderson  <rth@cygnus.com>
 110
 111         * d30v-opc.c (pre_defined_register): Remove alias for r0.
 112
 113 end-sanitize-d30v
 114 start-sanitize-r5900
 115 Mon May 11 13:12:15 1998  Frank Ch. Eigler  <fche@cygnus.com>
 116
 117         * mips-opc.c (break): Added 20-bit single-operand break
 118         instruction for R5900 only.
 119
 120 end-sanitize-r5900
 121 Sun May 10 22:37:22 1998  Jeffrey A Law  (law@cygnus.com)
 122
 123         * po/Make-in (install-info): New target.
 124
 125 Thu May  7 17:15:59 1998  Ian Lance Taylor  <ian@cygnus.com>
 126
 127         * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
 128         * configure: Rebuild.
 129
 130 Thu May  7 12:49:46 1998  Frank Ch. Eigler  <fche@cygnus.com>
 131
 132         * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
 133         variety of ISA2 instructions to set bottom ten bits of trap code.
 134
 135 Thu May  7 11:54:25 1998  Ian Lance Taylor  <ian@cygnus.com>
 136
 137         * Makefile.am (config.status): Add explicit target so that
 138         config.status depends upon bfd/configure.in.
 139         * Makefile.in: Rebuild.
 140
 141 Thu May  7 09:33:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
 142
 143         * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
 144         instructions to set bottom ten bits of break code.
 145         * mips-dis.c (print_insn_arg): Implement 'q' operand format used
 146         for above optional argument.
 147
 148 start-sanitize-cygnus
 149 Wed May  6 14:47:17 1998  Doug Evans  <devans@seba.cygnus.com>
 150
 151         * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
 152         * m32r-opc.h: Regenerate.
 153
 154 end-sanitize-cygnus
 155 Wed May  6 15:30:06 1998  Klaus Kaempf  <kkaempf@progis.de>
 156
 157         * makefile.vms: Run dec c with /nodebug.
 158
 159 Mon May  4 10:19:57 1998  Tom Tromey  <tromey@cygnus.com>
 160
 161         * Makefile.in: Rebuilt.
 162         * Makefile.am: Regenerated dependencies with mkdep.
 163
 164         * opintl.h (_): Define as dgettext.
 165
 166 start-sanitize-cygnus
 167 Fri May  1 13:47:42 1998  Doug Evans  <devans@canuck.cygnus.com>
 168
 169         * configure.in: Add support for --enable-cgen-maint.
 170         * Makefile.am (M32R_DEPS): New variable.
 171         (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
 172         * aclocal.m4: Regenerate.
 173         * Makefile.in: Regenerate.
 174         * configure: Regenerate.
 175
 176         * Makefile.am (CGENFILES): Add minsn.scm.
 177
 178 end-sanitize-cygnus
 179 Tue Apr 28 14:12:12 1998  Nick Clifton  <nickc@cygnus.com>
 180
 181         * cgen-asm.c: Internationalised.
 182 start-sanitize-cygnus
 183         * cgen-asm.in: Internationalised.
 184         * cgen-opc.in: Internationalised.
 185 end-sanitize-cygnus
 186         * m32r-asm.c: Internationalised.
 187         * m32r-dis.c: Internationalised.
 188         * m32r-opc.c: Internationalised.
 189
 190         * aclocal.m4: Regenerated.
 191         * configure: Regenerated.
 192         * Makefile.am (POTFILES): Remove inclusion of BFD_H.
 193         * Makefile.in: Rebuild.
 194         * po/POTFILES.in: Rebuilt using rule in Makefile.in.
 195         * po/opcodes.pot: Rebuilt after changing POTFILES.in.
 196
 197 Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>
 198
 199         * configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
 200         after AC_PROG_CC.
 201         * aclocal.m4, configure: Rebuild with current tools.
 202
 203 Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
 204
 205         * opintl.h: New file - contains internationalisation macros used
 206         by source files in this directory.
 207         * po/: New subdirectory - contains internationalisation files.
 208         * po/Make-in: New file - Makefile constructor.
 209         * po/POTFILES.in: New file - list of files in opcodes directory
 210         that should be scan for internationalisation macros.
 211         * po/opcodes.pot: New file - list of internationisation strings
 212         found in files mentioned in po/POTFILES.in.
 213         * Makefile.am: Add rule to build po/POTFILES.in.  Add SUBDIRS
 214         entry.  Add intl directory to include paths.
 215         * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
 216         HAVE_STRCPY, HAVE_LC_MESSAGES
 217         * configure.in: Add rule to build Makefile in po subdirectory.
 218         * Makefile.in: Rebuilt.
 219         * aclocal.m4: Rebuilt.
 220         * config.in: Rebuilt.
 221         * configure: Rebuilt.
 222         * alpha-opc.c: Internationalised.
 223         * arc-dis.c: Internationalised.
 224         * arc-opc.c: Internationalised.
 225         * arm-dis.c: Internationalised.
 226         * cgen-asm.c: Internationalised.
 227 start-sanitize-d30v
 228         * d30v-dis.c: Internationalised.
 229 end-sanitize-d30v
 230         * dis-buf.c: Internationalised.
 231 start-sanitize-sky
 232         * dvp-dis.c: Internationalised.
 233         * dvp-opc.c: Internationalised.
 234 end-sanitize-sky
 235         * h8300-dis.c: Internationalised.
 236         * h8500-dis.c: Internationalised.
 237         * i386-dis.c: Internationalised.
 238         * m10200-dis.c: Internationalised.
 239         * m10300-dis.c: Internationalised.
 240         * m68k-dis.c: Internationalised.
 241         * m88k-dis.c: Internationalised.
 242         * mips-dis.c: Internationalised.
 243         * ns32k-dis.c: Internationalised.
 244         * opintl.h: Internationalised.
 245         * ppc-opc.c: Internationalised.
 246         * sparc-dis.c: Internationalised.
 247         * v850-dis.c: Internationalised.
 248         * v850-opc.c: Internationalised.
 249
 250 Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>
 251
 252         * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
 253         (asm_hash_table_entries): New variable.
 254         (cgen_asm_init): Free asm_hash_table_entries.
 255         (hash_insn_array,hash_insn_list): New functions.
 256         (build_asm_hash_table): Use them.  Hash macro insns as well.
 257         (cgen_asm_lookup_insn): Update.
 258         * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
 259         (dis_hash_table_entries): New variable.
 260         (cgen_dis_init): Free dis_hash_table_entries.
 261         (hash_insn_array,hash_insn_list): New functions.
 262         (build_dis_hash_table): Use them.  Hash macro insns as well.
 263         (cgen_dis_lookup_insn): Update.
 264         * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
 265         (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
 266         (cgen_macro_insn_count): New function.
 267         * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
 268         All callers updated.  Sanity check result of extract fn.
 269         (@arch@_cgen_get_insn_operands): Change result type to void.
 270         Delete args insn_value, length.  New arg fields.  All callers updated.
 271         (@arch@_cgen_lookup_get_insn_operands): New function.
 272         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 273
 274 Fri Apr 24 16:07:57 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 275
 276         * i386-dis.c (OP_DSSI): Print segment override.
 277
 278 start-sanitize-r5900
 279 Thu Apr 23 12:32:07 1998  Frank Ch. Eigler  <fche@cygnus.com>
 280
 281         * mips-opc.c (msub.s): Correct mask pattern for disassembly.
 282
 283 end-sanitize-r5900
 284 start-sanitize-r5900
 285 Mon Apr 20 19:11:55 1998  Frank Ch. Eigler  <fche@cygnus.com>
 286
 287         * mips-opc.c (madd.s): Correct mask pattern for disassembly.
 288
 289 end-sanitize-r5900
 290 start-sanitize-r5900
 291 Sat Apr 18 00:29:18 1998  Jeffrey A Law  (law@cygnus.com)
 292
 293         * vu0.h (vlqd, vlqi): Update per revised specs.
 294
 295 end-sanitize-r5900
 296 start-sanitize-sky
 297 Thu Apr 16 11:44:59 1998  Doug Evans  <devans@canuck.cygnus.com>
 298
 299         * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
 300         (vif_operands): Update.
 301         (vif_get_unpackloc): Delete.
 302         (state_vif_unpackloc{,_star_p}): Delete.
 303         (dvp_opcode_init_parse): Update.
 304         (vif_unpack_len_value): Avoid divide by zero.
 305
 306 end-sanitize-sky
 307 start-sanitize-r5900
 308 Wed Apr 15 10:30:07 1998   Frank Ch. Eigler  <fche@cygnus.com>
 309
 310         * vu0.h: Specs changed for VCALLMSR bit pattern.
 311         * mips-dis.c: (print_insn_arg) Matching change.
 312
 313 end-sanitize-r5900
 314 Mon Apr 13 16:59:39 1998  Nick Clifton  <nickc@cygnus.com>
 315
 316         * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
 317         operator.
 318
 319 Mon Apr 13 16:50:27 1998  Ian Lance Taylor  <ian@cygnus.com>
 320
 321         * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
 322         (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
 323         * configure.in: Define and substitute WIN32LDFLAGS and
 324         WIN32LIBADD.
 325         * aclocal.m4: Rebuild with new libtool.
 326         * configure, Makefile.in: Rebuild.
 327
 328 start-sanitize-r5900
 329 Mon Apr 13 16:02:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
 330
 331         * vu0.h: Corrected bit pattern for VMAXI opcode.
 332
 333 end-sanitize-r5900
 334 Fri Apr 10 18:14:31 1998  Doug Evans  <devans@canuck.cygnus.com>
 335
 336         * m32r-opc.c: Regenerate.
 337
 338 start-sanitize-sky
 339 Mon Apr  6 17:16:48 1998  Doug Evans  <devans@canuck.cygnus.com>
 340
 341         * dvp-opc.c (vif_macros): Tweak unpackloc operand.
 342         (dvp_expand_macro): Implement.
 343         (insert_vif_datalen): Record value with max+1 -> 0 conversion.
 344         (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
 345
 346 end-sanitize-sky
 347 Sun Apr  5 16:04:39 1998  H.J. Lu  <hjl@gnu.org>
 348
 349         * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
 350         before trying to copy it.
 351         * Makefile.in: Rebuild.
 352
 353 Thu Apr  2 17:25:49 1998  Nick Clifton  <nickc@cygnus.com>
 354
 355         * m32r-opc.c: Use signed immediate values for CMPUI instruction.
 356
 357 start-sanitize-m32rx
 358 Thu Apr  2 16:44:23 1998  Nick Clifton  <nickc@cygnus.com>
 359
 360         * m32r-opc.c: Fix bit patterns for SAT and SATB.
 361
 362 end-sanitize-m32rx
 363 Wed Apr  1 16:20:27 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
 364
 365         * ns32k-dis.c (bit_extract_simple): New function to extract bits
 366         from an arbitrary valid buffer instead of fetching them on demand
 367         using fetch_data().
 368         (invalid_float): use bit_extract_simple() instead of bit_extract().
 369
 370 start-sanitize-m32rx
 371 Wed Apr  1 14:57:54 1998  Nick Clifton  <nickc@cygnus.com>
 372
 373         * m32r-opc.c: Fix SATB bit pattern.  Add extra control registers.
 374         * m32r-opc.h: Add extra control registers.
 375
 376 end-sanitize-m32rx
 377 Tue Mar 31 11:09:08 1998  Ian Lance Taylor  <ian@cygnus.com>
 378
 379         From H.J. Lu <hjl@gnu.org>:
 380         * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
 381         to Ev for both.
 382
 383 Mon Mar 30 17:32:03 1998  Ian Lance Taylor  <ian@cygnus.com>
 384
 385         * Branched binutils 2.9.
 386
 387 start-sanitize-d30v
 388 Mon Mar 30 15:18:00 1998  Ken Raeburn  <raeburn@cygnus.com>
 389
 390         * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
 391         disassembling last 4 bytes of a section.
 392
 393 end-sanitize-d30v
 394 Fri Mar 27 18:08:13 1998  Ian Lance Taylor  <ian@cygnus.com>
 395
 396         Fix some gcc -Wall warnings:
 397         * arc-dis.c (print_insn): Add casts to avoid warnings.
 398         * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
 399         * d10v-dis.c (dis_long, dis_2_short): Likewise.
 400 start-sanitize-sky
 401         * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
 402         (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
 403         (parse_bc, parse_vfreg, parse_accdest): Likewise.
 404         (parse_ffstreg, parse_vif_mode): Likewise.
 405 end-sanitize-sky
 406         * m10200-dis.c (disassemble): Likewise.
 407         * m10300-dis.c (disassemble): Likewise.
 408         * ns32k-dis.c (print_insn_ns32k): Likewise.
 409         * ppc-opc.c (insert_ral, insert_ram): Likewise.
 410         * cgen-dis.c (build_dis_hash_table): Remove used local variables.
 411         * cgen-opc.c (cgen_keyword_search_next): Likewise.
 412         * d10v-dis.c (dis_long, dis_2_short): Likewise.
 413 start-sanitize-d30v
 414         * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
 415 end-sanitize-d30v
 416 start-sanitize-sky
 417         * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
 418         * dvp-opc.c (parse_dest1, print_uflags): Likewise.
 419         (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
 420 end-sanitize-sky
 421         * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
 422 start-sanitize-tic80
 423         * tic80-dis.c (print_one_instruction): Likewise.
 424 end-sanitize-tic80
 425         * w65-dis.c (print_operand): Likewise.
 426         * z8k-dis.c (fetch_data): Likewise.
 427         * a29k-dis.c: Add return type for find_byte_func_type.
 428         * arc-opc.c: Include <stdio.h>.  Remove declarations of
 429         insert_multshift and extract_multshift.
 430 start-sanitize-d30v
 431         * d30v-dis.c (lookup_opcode): Parenthesize assignments in
 432         conditionals.
 433         (extract_value): Fully parenthesize expression.
 434 end-sanitize-d30v
 435 start-sanitize-sky
 436         * dvp-opc.c: Include <ctype.h>.
 437         (print_sdest): Add default case to switch.
 438 end-sanitize-sky
 439         * h8500-dis.c (print_insn_h8500): Initialize local variables.
 440         * h8500-opc.h (h8500_table): Fully bracket initializer.
 441         * w65-opc.h (optable): Likewise.
 442         * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
 443         * i386-dis.c (OP_E): Initialize local variables.
 444         * m10200-dis.c (print_insn_mn10200): Likewise.
 445         * mips-dis.c (print_insn_mips16): Likewise.
 446         * sh-dis.c (print_insn_shx): Likewise.
 447         * v850-dis.c (print_insn_v850): Likewise.
 448         * ns32k-dis.c (print_insn_arg): Declare.
 449         (get_displacement, invalid_float): Declare.
 450         (list_search, sign_extend, flip_bytes): Declare return type.
 451         (get_displacement): Likewise.
 452         (print_insn_arg): Likewise.  Make d int.  Fix sprintf format
 453         string.
 454         (print_insn_ns32k): Make i unsigned.
 455         (invalid_float): Make static.  Declare type of val.
 456         * tic30-dis.c (print_par_insn): Make i size_t.  Don't check strlen
 457         on each for iteration.
 458         * tic30-dis.c (get_indirect_operand): Likewise.
 459         * z8k-dis.c (print_insn_z8001): Declare return type.
 460         (print_insn_z8002): Likewise.
 461         (unparse_instr): Fix sprintf format strings.
 462
 463 Fri Mar 27 00:05:23 1998  Jeffrey A Law  (law@cygnus.com)
 464
 465         * mips-opc.c: Add "sync.l" and "sync.p".
 466
 467 start-sanitize-sky
 468 Thu Mar 26 13:27:37 1998  Doug Evans  <devans@canuck.cygnus.com>
 469
 470         * dvp-opc.c (extract_vif_datalen): Rewrite.
 471         (vif_insn_len): Perform 0->max+1 conversion for direct length.
 472
 473 Wed Mar 25 13:32:36 1998  Doug Evans  <devans@canuck.cygnus.com>
 474
 475         * dvp-dis.c (print_insn): Print unpack address in hex.
 476         * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
 477         Don't skip over '*', just record it.
 478         (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
 479         (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
 480         Don't skip over '*', just record it.
 481         (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
 482         (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
 483         (vif_opcodes): Likewise.
 484         (state_vif_{mpg,unpack}loc_star_p): New static locals.
 485         (vif_macros,vif_macro_count): New globals.
 486         (vif_unpack_len_value): New arguments wl,cl.  All callers updated.
 487         (vif_set_{mpg,unpack}loc): Delete.  All callers updated.
 488         (vif_get_wl_cl): New function.
 489         (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
 490
 491 end-sanitize-sky
 492 Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 493
 494         * m68k-dis.c (print_insn_m68k): Use info->mach to select the
 495         default m68k variant to recognize.
 496
 497         * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
 498         (ctrl, cobr, mem, ea): Likewise.
 499         (print_addr): Likewise.  Remove cast.
 500         (ea): Cast argument of print_addr to bfd_vma.
 501
 502         * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
 503         variable value.
 504         (cgen_parse_unsigned_integer): Likewise.
 505         (cgen_parse_address): Likewise.
 506
 507 Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>
 508
 509         * i960-dis.c (ctrl): Add full braces to structure initialization.
 510         (cobr, mem, reg): Likewise.
 511         (ea): Correct parenthesization in expression.
 512
 513         * cgen-asm.c: Include <ctype.h>.
 514         (build_asm_hash_table): Remove unused local variable i.
 515         (cgen_parse_keyword): Add casts to avoid warnings.
 516
 517         * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
 518         symbol.  Fix indentation.
 519         (print_insn_little_arm): Likewise.
 520
 521 start-sanitize-r5900
 522 Tue Mar 24 18:11:13 1998  Jeffrey A Law  (law@cygnus.com)
 523
 524         * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
 525         opcode extensions.
 526
 527 end-sanitize-r5900
 528 start-sanitize-m32rx
 529 Mon Mar 23 11:32:11 1998  Nick Clifton  <nickc@cygnus.com>
 530
 531         * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
 532         (PR15418).
 533
 534 end-sanitize-m32rx
 535 start-sanitize-sky
 536 Mon Mar 23 09:45:04 1998  Doug Evans  <devans@canuck.cygnus.com>
 537
 538         * dvp-opc.c (vif_operand_datalen_special): New global.
 539
 540 end-sanitize-sky
 541 start-sanitize-r5900
 542 Sun Mar 22 13:00:14 1998  Jeffrey A Law  (law@cygnus.com)
 543
 544         * vu0.h (vcallms): Use 'O' for call target operand.
 545         * mips-dis.c (print_insn_arg): Handle 'O'.
 546
 547 end-sanitize-r5900
 548 Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>
 549
 550         * configure.in: Use AM_DISABLE_SHARED.
 551         * aclocal.m4, configure: Rebuild with libtool 1.2.
 552
 553 start-sanitize-r5900
 554 Fri Mar 20 09:01:31 1998  Jeffrey A Law  (law@cygnus.com)
 555
 556         * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
 557         support.
 558         * vu0.h: Likewise.
 559
 560 end-sanitize-r5900
 561 Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>
 562
 563         These patches are courtesy of Jonathan Walton and Tony Thompson
 564         (athompso@cambridge.arm.com).
 565
 566         * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
 567         relative addresses.
 568
 569         * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
 570         both the offset and the label closest to the destination.
 571
 572 start-sanitize-r5900
 573 Thu Mar 19 13:53:25 1998  Jeffrey A Law  (law@cygnus.com)
 574
 575         * vu0.h: New file with cop2/vu0 instructions.
 576         * mips-opc.c: Include vu0.h.
 577         * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
 578         J, Q, X, and U.
 579         (print_insn_mips): Do not emit a tab after an instruction if the
 580         first arg is an instruction completer (&).  If the next arg is an
 581         escape character (%), then print the next arg verbatim.
 582         * Makefile.am (mips-opc.lo): Depend on vu0.h
 583
 584 end-sanitize-r5900
 585 start-sanitize-sky
 586 Thu Mar 19 10:42:51 1998  Doug Evans  <devans@canuck.cygnus.com>
 587
 588         * dvp-opc.c (vif_opcodes): Add stcycl.
 589
 590 Tue Mar 17 10:53:58 1998  Doug Evans  <devans@canuck.cygnus.com>
 591
 592         * dvp-dis.c (print_dma): Change length from 16 to 8.
 593
 594 end-sanitize-sky
 595 Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>
 596
 597         * m32r-opc.h: Regenerate.
 598
 599 start-sanitize-sky
 600 Thu Mar 12 09:18:54 1998  Doug Evans  <devans@canuck.cygnus.com>
 601
 602         * dvp-opc.c (print_dest1): Print dest spec again.
 603         (print_vfreg,print_accdest): Likewise.
 604         (vif_unpack_len): Round result up to word boundary.
 605
 606 end-sanitize-sky
 607 start-sanitize-vr4320
 608 Tue Mar 10 15:57:23 1998  Gavin Koch  <gavin@cygnus.com>
 609
 610         * mips-opc.c ("clz","dclz"): Added the 4320 versions.
 611
 612 Mon Mar  9 15:22:06 1998  Gavin Koch  <gavin@cygnus.com>
 613
 614         * mips-opc.c ("macc*","mul*"): Added the 4320 versions
 615         of these.
 616
 617 end-sanitize-vr4320
 618 start-sanitize-sky
 619 Fri Mar  6 11:27:53 1998  Doug Evans  <devans@canuck.cygnus.com>
 620
 621         * dvp-dis.c (print_gif): Fix length calcs for gifimage.
 622         (print_insn): Do mask comparison on proper opcode word.
 623         Print unsigned values in hex.
 624         * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
 625         (parse_bc): Catch missing dest.
 626         (parse_vfreg): Replace atoi call with strtol.
 627         (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
 628         (parse_bcftreg,parse_ffstreg): Handle missing dest.
 629         (extract_gif_eop): New function.
 630         (gif_operands): Update eop entry.
 631         (VGIFOP,VGIFNREGS): Fix calcs.
 632         (extract_gif_prim): Set *pinvalid to 1 if prim not used.
 633         (gif_regs): Add entry for unused 11 case.
 634         (print_gif_regs): Print empty list instead of nothing.
 635         (extract_gif_nloop): Fix value calc.
 636         (print_gif_nloop): Always print value, even if 0.
 637         (insert_vif_wlcl,extract_vif_wlcl): New functions.
 638         (vif_operands): Use them for wl,cl fields.
 639         (state_vif_wl,state_vif_cl): New static locals.
 640         (parse_vif_mode): Handle numeric args.
 641         (vif_unpack_len_value,vif_unpack_len): New functions.
 642         (vif_insn_len): Call vif_unpack_len.
 643
 644 end-sanitize-sky
 645 Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>
 646
 647         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 648
 649 Tue Mar  3 18:51:22 1998  Doug Evans  <devans@seba.cygnus.com>
 650
 651         * cgen-asm.in: Move insertion of generated routines to top of file.
 652         (insert_normal): Add prototype.  Delete `shift' arg.
 653         * cgen-dis.in: Move insertion of generated routines to top of file.
 654         (extract_normal): Add prototype.  Delete `shift' arg.
 655         (print_normal): Add prototype.  Call CGEN_PRINT_NORMAL if defined.
 656         (print_keyword): Add prototype.  Fix type of `attrs' arg.
 657
 658 start-sanitize-vr4320
 659 Tue Mar  3 11:47:58 1998  Gavin Koch  <gavin@cygnus.com>
 660
 661         * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
 662         * mips-opc.c ("mac","dmac") : Added 4320 insns.
 663
 664 end-sanitize-vr4320
 665 Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>
 666
 667         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
 668         assume that info->symbols is non-empty.
 669
 670 Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>
 671
 672         * alpha-opc.c (cvtqs) There is no such thing.
 673         (cvttq): Missing most of the /*d variants.
 674
 675 start-sanitize-r5900
 676 Fri Feb 27 13:16:42 1998  Andrew Cagney  <cagney@b1.cygnus.com>
 677
 678         * mips-opc.c (r5900/madd.s): Takes three operands, not four.  Fix
 679         opcode.
 680         (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
 681         (r5900/msub.s): Takes three operands, not four.  Fix opcode.
 682
 683 end-sanitize-r5900
 684 start-sanitize-d30v
 685 Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>
 686
 687         * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
 688         delayed branches or jumps.
 689
 690 end-sanitize-d30v
 691 start-sanitize-sky
 692 Fri Feb 27 10:04:19 1998  Doug Evans  <devans@canuck.cygnus.com>
 693
 694         * dvp-opc.c (vif_operands): Add unpack[u] support.
 695         (vif_opcodes): Ditto.
 696         (*_vif_imrubits): Renamed from *_vif_imrbits.
 697
 698 Wed Feb 25 00:27:44 1998  Doug Evans  <devans@canuck.cygnus.com>
 699
 700         * dvp-dis.c (print_insn): Handle word number.
 701         Handle mips address vs vu address.
 702         * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
 703         (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
 704         ({insert,extract}_dma_addr): Fix word ofset.
 705         ({insert,print}_gif_regs): Fix encode/decode.
 706
 707 end-sanitize-sky
 708 Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>
 709
 710         * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
 711         to *info->symbols.
 712         * mips-dis.c (print_insn_{big,little}_mips): Likewise.
 713         * tic30-dis.c (print_branch): Likewise.
 714 start-sanitize-sky
 715         * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
 716         * dvp-dis.c (dvp_info_mach_type): New function.
 717         (print_insn_dvp): Call it.
 718         (print_vif): Return length of 4 if mpg or direct insn so following
 719         insns get properly disabled.
 720         (print_gif): Fix word order.
 721         * dvp-opc.c (vif_insn_len): New argument `pcpu'.  All callers updated.
 722         (gif_operands): Fix word order.
 723         (gif_opcodes): Likewise.
 724         ({insert,extract,print}_gif_regs): Likewise.
 725         (gif_regs): Add new register number/name changes.
 726         (dma_opcodes): Add dmarefe insn.
 727 end-sanitize-sky
 728
 729 Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>
 730
 731         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
 732         saved_symbol code as it is no longer needed.
 733
 734 Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>
 735
 736         * cgen-asm.c: Include symcat.h.
 737         * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
 738
 739         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
 740
 741 start-sanitize-sky
 742 Mon Feb 23 09:51:39 1998  Doug Evans  <devans@canuck.cygnus.com>
 743
 744         * dvp-opc.c (extra_dma_flags): Fix typos.
 745         (dma_operands): Fix word numbers.
 746         (dma_opcodes): Likewise.
 747         ({insert,extract}_dma_flags): Likewise.
 748
 749 end-sanitize-sky
 750 Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)
 751
 752         * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
 753
 754 start-sanitize-sky
 755 Fri Feb 20 18:02:20 1998  Doug Evans  <devans@canuck.cygnus.com>
 756
 757         * dvp-dis.c (print_gif): Complete.
 758         * dvp-opc.c (gif_operands,gif_opcodes): Complete.
 759         (state_gif_{nregs,regs,nloop}): New static locals.
 760         (*_gif_*): Complete.
 761         (dvp_opcode_init_{parse,print}): Init gif state locals.
 762         (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
 763         (vif_insn_len): Handle `unpack'.
 764         ({insert,extract}_dma_flags): Complete.
 765
 766 end-sanitize-sky
 767 start-sanitize-r5900
 768 Fri Feb 20 01:23:16 1998  Jeffrey A Law  (law@cygnus.com)
 769
 770         * mips-opc.c (mula.s): Renamed from multa.s.
 771
 772 end-sanitize-r5900
 773 Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>
 774
 775         * m32r-opc.[ch]: Regenerate.
 776
 777 start-sanitize-sky
 778 Thu Feb 19 02:11:39 1998  Doug Evans  <devans@charmed.cygnus.com>
 779
 780         * dvp-opc.c (dma_operands): Rewrite.
 781         (dma_operand_{count,addr}): New globals.
 782         (dma_opcodes): Rewrite.  Add "dmaend" with no operands.
 783         (insert_dma_addr): Insert value into insn.
 784         (extract_dma_addr): Extract value from insn.
 785
 786 Wed Feb 18 15:46:46 1998  Doug Evans  <devans@canuck.cygnus.com>
 787
 788         * dvp-dis.c (print_vu): Handle loi insns.
 789         (print_insn): Likewise.
 790         * dvp-opc.c (vu_lower_opcodes): Add "loi".
 791         (vu_operands): Make LDEST1 a FAKE operand.
 792         (parse_dest1): Allow elided argument.
 793         (print_dest1): Don't print the argument.
 794
 795 Tue Feb 17 18:48:25 1998  Doug Evans  <devans@canuck.cygnus.com>
 796
 797         * dvp-opc.c (parse_vfreg): Dest spec is optional.
 798         (print_vfreg): Don't print dest spec.
 799         (parse_accdest): Dest spec is optional.
 800         (print_accdest): Don't print dest spec.
 801
 802 end-sanitize-sky
 803 Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>
 804
 805         * Makefile.am (CGENFILES): Update.
 806         * Makefile.in: Regenerate.
 807         * cgen-asm.in (insert_normal): Result is error message now.
 808         Validate value to be inserted.
 809         (insert_insn_normal): Result is error message now.
 810         (@arch@_cgen_assemble_insn): Update.
 811         * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
 812         arguments.  Don't perform validation here.
 813         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
 814
 815 Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>
 816
 817         * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
 818         operand instance list.
 819         * m32r-opc.c: Regenerate.
 820
 821 Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>
 822
 823         * Makefile.am (AUTOMAKE_OPTIONS): Define.
 824         * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
 825
 826 Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>
 827
 828         * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
 829
 830 Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>
 831
 832         * configure.in: Get the version number from BFD.
 833         * configure: Rebuild.
 834
 835         From H.J. Lu <hjl@gnu.org>:
 836         * Makefile.am (libopcodes_la_LDFLAGS): Define.
 837         * Makefile.in: Rebuild.
 838
 839 Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>
 840
 841         * m32r-opc.c: Regenerate.
 842         * m32r-opc.h: Regenerate.
 843
 844 Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>
 845
 846         * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
 847         Ignore ALIAS insns if asked to.
 848         (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
 849         * m32r-opc.c: Regenerate.
 850
 851 start-sanitize-sky
 852         * dvp.opc.c: Nicely format opcode tables.
 853         (vu_operands): New element UFLAGS.
 854         (parse_uflags,print_uflags): New functions.
 855         (vu_upper_opcodes): Add UFLAGS to all insns.
 856
 857 end-sanitize-sky
 858 Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>
 859
 860         Fix rac to accept only a0:
 861         * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
 862         Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
 863         Introduce OPERAND_GPR.
 864         * d10v-dis.c (print_operand): Likewise.
 865
 866 Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>
 867
 868         * cgen-opc.in: New file.
 869         * cgen.sh: Translate @ARCH@.  Cat cgen-opc.in into @arch@-opc.c.
 870         * Makefile.am (CGENFILES): Add cgen-opc.in.
 871         * Makefile.in: Regenerate.
 872
 873         * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
 874         (cgen_hw_lookup): Make result const.
 875
 876         * cgen-dis.in (*): Use PTR instead of void *.
 877         (print_insn): Delete unused vars `i', `syntax'.
 878
 879         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
 880
 881 start-sanitize-sky
 882 Tue Feb 10 14:56:24 1998  Doug Evans  <devans@canuck.cygnus.com>
 883
 884         * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
 885         (vif_opcodes): Update renamed insns.
 886         * dvp-dis.c (*): Likewise.
 887
 888 end-sanitize-sky
 889 Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>
 890
 891         * configure, aclocal.m4: Rebuild with new libtool.
 892
 893 start-sanitize-d30v
 894 Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>
 895
 896         * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
 897         instructions use a PC relative branch, not absolute.
 898
 899 end-sanitize-d30v
 900 Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>
 901
 902         * configure.in: Set libtool_enable_shared rather than
 903         libtool_shared.  Remove diversion hack.
 904         * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
 905
 906 Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>
 907
 908         * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
 909         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
 910
 911 Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>
 912
 913         * tic30-dis.c: New file.
 914         * disassemble.c (disassembler): Add bfd_arch_tic30 case.
 915         * configure.in: Handle bfd_tic30_arch.
 916         * Makefile.am: Rebuild dependencies.
 917         (CFILES): Add tic30-dis.c
 918         (ALL_MACHINES): Add tic30-dis.lo.
 919         * configure, Makefile.in: Rebuild.
 920
 921 start-sanitize-m32rx
 922 Mon Feb  2 11:04:08 1998  Nick Clifton  <nickc@cygnus.com>
 923
 924         * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
 925         versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
 926         macwhi-a and macwlo-a instructions.
 927
 928 end-sanitize-m32rx
 929 start-sanitize-sky
 930 Fri Jan 30 17:39:21 1998  Ian Carmichael  <iancarm@cygnus.com>
 931
 932         * dvp-opc.c, fixed encoding of a bunch of instructions to
 933         be consistent with the asmvu assembler (and inconsistent
 934         with the specification).
 935
 936 Thu Jan 29 18:14:56 1998  Ian Carmichael  <iancarm@cygnus.com>
 937
 938         * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
 939         in the opcode table.  The pkemscalf instruction must come first.
 940
 941 Thu Jan 29 16:47:24 1998  Ian Carmichael  <iancarm@cygnus.com>
 942
 943         * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
 944
 945 end-sanitize-sky
 946 Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>
 947
 948         * m32r-opc.h (HAVE_CPU_M32R): Define.
 949
 950 start-sanitize-sky
 951 Wed Jan 28 13:46:19 1998  Doug Evans  <devans@canuck.cygnus.com>
 952
 953         * dvp-dis.c, dvp-opc.c: New files.
 954         * configure.in: Compile them if bfd_dvp_arch, as well as mips.
 955         * configure: Regenerate.
 956         * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
 957         (dvp-dis.lo,dvp-opc.lo): Add rules for.
 958         (mips-dis.lo): Compile with @archdefs@.
 959         * Makefile.in: Regenerate.
 960         * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
 961         * mips-dis.c (print_insn_little_mips): Check for DVP insns.
 962
 963 end-sanitize-sky
 964 Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>
 965
 966         * v850-opc.c (insertion routines): If both alignment and size is
 967         wrong then report this.
 968
 969 Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)
 970
 971         * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
 972         Only recognize instructions for the current target_processor.
 973
 974 Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>
 975
 976         * d10v-dis.c (PC_MASK): Correct value.
 977         (print_operand): If there's a reloc, don't calculate the
 978         address because they could be in different sections.
 979
 980 start-sanitize-cygnus
 981 Thu Jan 22 16:10:32 1998  Doug Evans  <devans@seba.cygnus.com>
 982
 983         * cgen.sh: Rewrite to be like simulator's version.
 984         * Makefile.am (cgen): Update call to cgen.sh.
 985         * Makefile.in: Regenerate
 986
 987 end-sanitize-cygnus
 988 Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>
 989
 990         * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
 991         instruction after the 4650's "mul" instruction; nobody's using the
 992         4010 these days.  If object files someday indicate which processor
 993         variant they're intended for, we can do a better job at this.
 994
 995 start-sanitize-r5900
 996 Tue Jan 13 09:21:56 1998  Jeffrey A Law  (law@cygnus.com)
 997
 998         * mips-opc.c (c.lt.s): Add r5900 variant.
 999         (c.le.s): Likewise.
1000
1001 end-sanitize-r5900
1002 Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>
1003
1004         * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1005         table provided entry size.  Use CGEN_INSN_MNEMONIC.
1006         (cgen_parse_keyword): Rewrite.
1007         * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1008         table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
1009         * cgen-opc.c: Clean up pass over `struct foo' usage.
1010         (cgen_keyword_lookup_value): Handle "" entry.
1011         (cgen_keyword_add): Likewise.
1012 start-sanitize-cygnus
1013         * Makefile.am: Add cgen support.
1014         * Makefile.in: Regenerate.
1015         * configure.in: Add cgen support.
1016         * configure: Regenerate.
1017         * aclocal.m4: Regenerate.
1018         * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1019 end-sanitize-cygnus
1020
1021 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
1022
1023         * mips-opc.c: Add FP_D to s.d instruction flags.
1024
1025 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1026
1027         * m68k-opc.c (halt, pulse): Enable them on the 68060.
1028
1029 start-sanitize-tic80
1030 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
1031
1032         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1033         PC relative offset forms before the 15 bit forms.  An assembler command
1034         line option now chooses the default.
1035
1036 end-sanitize-tic80
1037 start-sanitize-r5900
1038 Tue Dec 16 13:24:22 1997  Jeffrey A Law  (law@cygnus.com)
1039
1040         * mips-opc.c: Add many missing r5900 instructions.
1041
1042 end-sanitize-r5900
1043 start-sanitize-d30v
1044 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
1045
1046         * d30v-opc.c (d30v_opcode_table): Set new flags bits
1047         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1048
1049 end-sanitize-d30v
1050 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
1051
1052         * configure: Only build libopcodes shared if --enable-shared's value
1053         was `yes', or was set to `*opcodes*'.
1054         * aclocal.m4: Likewise.
1055         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1056         original source of this bit of code.  It's not clear what the best fix
1057         would be, though.
1058
1059 start-sanitize-r5900
1060 Mon Dec 15 12:43:36 1997  Jeffrey A Law  (law@cygnus.com)
1061
1062         * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1063 end-sanitize-r5900
1064 start-sanitize-tic80
1065 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
1066
1067         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1068         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1069         offset forms before the 15 bit forms, to default to the long forms.
1070
1071 end-sanitize-tic80
1072 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
1073
1074         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1075
1076 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
1077
1078         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1079         symbol if none is present.
1080         (print_insn_big_arm):  Prevent examination of stored symbol if
1081         none is present.
1082
1083 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
1084
1085         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1086
1087 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
1088
1089         * disassemble.c: Remove disasm_symaddr() function.
1090
1091         * arm-dis.c: Use info->symbol instead of info->flags to determine
1092         if disassmbly should be in Thumb or Arm mode.
1093
1094 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
1095
1096         * arm-dis.c: Add support for disassembling Thumb opcodes.
1097         (print_insn_thumb): New function.
1098
1099         * disassemble.c (disasm_symaddr): New function.
1100
1101         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1102         (thumb_opcodes): Table of Thumb opcodes.
1103
1104 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1105
1106         * m68k-opc.c (btst): Change Dd@s to Dd;b.
1107
1108         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1109         and 'v' as operand types.
1110
1111 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
1112
1113         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
1114         <olivier.carmona@di.epfl.ch>.
1115         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1116         which has a two word opcode with a one word argument.
1117
1118 start-sanitize-d30v
1119 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
1120
1121         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1122         unsigned, not signed.
1123         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1124
1125 end-sanitize-d30v
1126 Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>
1127
1128         * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1129         * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1130         (ftrv): Slay the cut-and-paste monster.
1131
1132 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1133
1134         * d10v-dis.c (print_operand):
1135         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1136
1137 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1138
1139         * d10v-opc.c (OPERAND_FLAG): Split into:
1140         (OPERAND_FFLAG, OPERAND_CFLAG) .
1141         (FSRC): Split into:
1142         (FFSRC, CFSRC).
1143
1144 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
1145
1146         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1147         field for all INSN_MACRO's.
1148         * mips16-opc.c: same
1149
1150 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
1151
1152         * mips-opc.c (sync,cache): These are 3900 insns.
1153
1154 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1155
1156         sh-opc.h (sh_table): Remove ftst/nan.
1157
1158 start-sanitize-vr5400
1159 Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>
1160
1161         * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1162         (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1163         last.
1164         * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1165
1166 end-sanitize-vr5400
1167 start-sanitize-tx49
1168 Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>
1169
1170         * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1171         Add tx49 insns and configury.
1172
1173 end-sanitize-tx49
1174 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
1175
1176         * mips-opc.c (ffc, ffs): Fix mask.
1177
1178 start-sanitize-d30v
1179 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
1180
1181         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1182         control registers.
1183
1184 end-sanitize-d30v
1185 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1186
1187         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1188 start-sanitize-vr5400
1189         Added VR5400 instructions.
1190         (N5): New cpu-id macro.
1191 end-sanitize-vr5400
1192         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1193
1194 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1195
1196         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1197         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1198
1199 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
1200
1201         * v850-dis.c (disassemble): Replace // with /* ... */
1202
1203 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
1204
1205         * sparc-opc.c: Add wr & rd for v9a asr's.
1206         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1207         (v9a_asr_reg_names): New variable.
1208         Patch from David Miller <davem@vger.rutgers.edu>.
1209
1210 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
1211
1212         * sparc-opc.c (v9notv9a): New insn type.
1213         (IMPDEP): Move to the end to not conflict with edge8 et al.
1214         Patch from David Miller <davem@vger.rutgers.edu>.
1215
1216 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
1217
1218         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1219
1220 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
1221
1222         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1223
1224 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
1225
1226         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1227         of disassemble_info structure to determine if an overlay address
1228         has a matching symbol in low memory.
1229
1230         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1231         new symbol_at_address_func field in disassemble_info structure.
1232
1233 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
1234
1235         * v850-opc.c (extract_d22): Use signed arithmatic.
1236
1237 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
1238
1239         * mips-opc.c: Three op mult is not an ISA insn.
1240
1241 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
1242
1243         * mips-opc.c: Fix formatting.
1244
1245 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
1246
1247         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1248         than assuming that char is signed.  Explicitly sign extend 16 bit
1249         values, rather than assuming that short is 16 bits.
1250         (OP_sI, OP_J, OP_DIR): Likewise.
1251
1252 start-sanitize-v850e
1253 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
1254
1255         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1256         system registers.
1257
1258 end-sanitize-v850e
1259 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
1260
1261         * v850-opc.c: Fix typo in comment.
1262
1263         * v850-dis.c (disassemble): Add test of processor type when
1264         determining opcodes.
1265
1266 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
1267
1268         * configure.in: Use a diversion to set enable_shared before the
1269         arguments are parsed.
1270         * configure: Rebuild.
1271
1272 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
1273
1274         * m68k-opc.c (TBL1): Use ! rather than `.
1275         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1276
1277 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
1278
1279         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1280
1281         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1282
1283         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1284         for mcf5200.
1285
1286         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1287         * aclocal.m4: Rebuild with new libtool.
1288         * configure: Rebuild.
1289
1290 start-sanitize-v850e
1291 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1292
1293         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1294
1295 end-sanitize-v850e
1296 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
1297
1298         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1299
1300 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
1301
1302         * v850-opc.c (v850_opcodes): Further rearrangements.
1303
1304 start-sanitize-d30v
1305 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
1306
1307         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1308
1309 end-sanitize-d30v
1310 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
1311
1312         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1313         parser to work.
1314
1315 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
1316
1317         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1318 start-sanitize-tx19
1319         * mips16-opc.c: Added mips16 sdbbp.
1320 end-sanitize-tx19
1321
1322 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
1323
1324         * v850-opc.c: Initialise processors field of v850_opcode structure.
1325
1326 start-sanitize-d30v
1327 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
1328
1329         Merge changes from Martin Hunt:
1330
1331         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1332
1333         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1334         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1335         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1336
1337         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1338
1339         * d30v-dis.c (print_insn): First operand of d*i (delayed
1340         branch) instructions is relative.
1341
1342         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1343         (d30v_operand_table): Add IMM6S3 type.
1344         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1345
1346         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1347         and cmp instructions.
1348
1349         * d30v-opc.c: Correct entries for repeat*, and sat*.
1350         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1351         types. Correct several formats.
1352
1353         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1354
1355         * d30v-opc.c (pre_defined_registers): Change control registers.
1356
1357         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1358         SHORT_C2.  Manual was incorrect.
1359
1360         * d30v-dis.c (lookup_opcode):  Return value now indicates
1361         if an opcode has a short and a long form.  Used for deciding
1362         to append a ".s" or ".l".
1363         (print_insn): Append a ".s" to an instruction if it is
1364         the short form and ".l" if it is a long form. Do not append
1365         anything if the instruction has only one possible size.
1366
1367         * d30v-opc.c: Change mulx2h to require an even register.
1368         New form: SHORT_A2; a SHORT_A form that needs an even
1369         register as the first operand.
1370
1371         * d30v-dis.c (print_insn_d30v): Fix problem where the last
1372         instruction was not being disassembled if there were an odd
1373         number of instructions.
1374
1375         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
1376
1377 end-sanitize-d30v
1378 start-sanitize-v850e
1379 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
1380
1381         * v850-dis.c (disassemble): Improved display of register lists.
1382
1383 end-sanitize-v850e
1384 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
1385
1386         * sparc-opc.c (sparc_opcodes): Fix assembler args to
1387         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1388         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1389         fandnot1s, fandnot2s.
1390
1391 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
1392
1393         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1394
1395 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
1396
1397         * cgen-asm.c (cgen_parse_address): New argument resultp.
1398         All callers updated.
1399         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1400
1401 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
1402
1403         * mn10200-dis.c (disassemble): PC relative instructions are
1404         relative to the next instruction, not the current instruction.
1405
1406 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
1407
1408         * v850-dis.c (disassemble): Only signed extend values that are not
1409         returned by extract functions.
1410         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1411
1412 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
1413
1414         * v850-opc.c: Update comments.  Remove use of
1415         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
1416
1417 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
1418
1419         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1420
1421 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
1422
1423         * configure: Rebuilt with latest devo autoconf for NT support.
1424
1425 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
1426
1427         * v850-dis.c (disassemble): Use curly brace syntax for register
1428         lists.
1429
1430         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1431         where r0 is being used as a destination register.
1432
1433 start-sanitize-v850e
1434 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
1435
1436         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1437 end-sanitize-v850e
1438
1439 Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1440
1441         * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1442         (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1443         (sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
1444         Add insns to access SGR and DBR.
1445         * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1446
1447 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
1448
1449         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1450
1451 start-sanitize-v850e
1452 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
1453
1454         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1455         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1456         opcodes..
1457
1458 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
1459
1460         * configure (cgen_files): Add support for v850e target.
1461         * configure.in (cgen_files):  Add support for v850e target.
1462
1463 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
1464
1465         * configure (cgen_files): Add support for v850ea target.
1466         * configure.in (cgen_files):  Add support for v850ea target.
1467 end-sanitize-v850e
1468
1469 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
1470
1471         * configure.in (bfd_arc_arch): Add.
1472         * configure: Rebuild.
1473         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1474         * Makefile.in: Rebuild.
1475         * arc-dis.c, arc-opc.c: New files.
1476         * disassemble.c (ARCH_all): Define ARCH_arc.
1477         (disassembler): Add ARC support.
1478
1479 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
1480
1481 start-sanitize-v850e
1482         * v850-dis.c (disassemble): Add support for v850EA instructions.
1483
1484         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1485         (v850_opcodes): Add v850EA instructions.
1486
1487         * v850-dis.c (disassemble): Add support for v850E instructions.
1488
1489         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1490         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1491         insert_spe, extract_spe): New Functions.
1492         (v850_opcodes): Add v850E instructions.
1493 end-sanitize-v850e
1494
1495         * v850-opc.c: Reorganised and re-layed out to improve readability
1496         and portability.
1497
1498 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
1499
1500         * configure: Rebuild with autoconf 2.12.1.
1501
1502 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
1503
1504         * aclocal.m4, configure: Rebuild with new automake patches.
1505
1506 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
1507
1508         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1509         * acinclude.m4: Just include acinclude.m4 from BFD.
1510         * aclocal.m4, configure: Rebuild.
1511
1512 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
1513
1514         * Makefile.am: New file, based on old Makefile.in.
1515         * acconfig.h: New file.
1516         * acinclude.m4: New file.
1517         * stamp-h.in: New file.
1518         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1519         Removed shared library handling; now handled by libtool.  Replace
1520         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
1521         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
1522         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
1523         handling in AC_OUTPUT.
1524         * dep-in.sed: Change .o to .lo.
1525         * Makefile.in: Now built with automake.
1526         * aclocal.m4: Now built with aclocal.
1527         * config.in, configure: Rebuild.
1528
1529 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
1530
1531         * mips-opc.c: Fix typo/thinko in "eret" instruction.
1532
1533 start-sanitize-r5900
1534 Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1535
1536         * mips-opc.c: Fix coding of mtsa.
1537
1538 end-sanitize-r5900
1539 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
1540
1541         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1542         Make array const.
1543         * sparc-dis.c (sorted_opcodes): New static local.
1544         (struct opcode_hash): `opcode' is pointer to const element.
1545         (build_hash): First arg is now table of sorted pointers.
1546         (print_insn_sparc): Sort opcodes by sorting table of pointers.
1547         (compare_opcodes): Update.
1548
1549 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
1550
1551         * cgen-opc.c: #include <ctype.h>.
1552         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
1553         Handle case insensitive hashing.
1554         (hash_keyword_value): Change type of `value' to unsigned int.
1555
1556 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
1557
1558         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1559         precision FP, mark it as such.  Likewise for double precision
1560         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
1561         possible.
1562 start-sanitize-r5900
1563         (mips_builtin_opcodes): Remove non-existant r5900 instructions
1564 end-sanitize-r5900
1565
1566 start-sanitize-r5900
1567 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
1568
1569         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1570         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1571
1572 end-sanitize-r5900
1573 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
1574
1575         * ppc-opc.c (extract_nsi): make unsigned expression signed before
1576         negating it.
1577         (UNUSED): remove one level of parens, so MSVC doesn't choke on
1578         nesting depth when all the macros are expanded.
1579
1580 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
1581
1582         * sparc-opc.c: The fcmp v9a instructions take an integer register
1583         as a destination, not a floating point register.  From Christian
1584         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1585
1586 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
1587
1588         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1589         syntax.  From Roman Hodek
1590         <rnhodek@faui22c.informatik.uni-erlangen.de>.
1591
1592         * i386-dis.c (twobyte_has_modrm): Fix pand.
1593
1594 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
1595
1596         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1597
1598 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
1599
1600         * arm-dis.c: Add prototypes for arm_decode_shift and
1601         print_insn_arm.
1602
1603 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
1604
1605         * mips-opc.c: Add r3900 insns.
1606
1607 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
1608
1609         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
1610         print delay slot instructions on the same line.  When using a PC
1611         relative load, add a comment with the value being loaded if it can
1612         be obtained.
1613
1614 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
1615
1616         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1617         to pushS/popS for segment regs and byte constant so that
1618         pushw/popw printed when in 16 bit data mode.
1619
1620         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1621         print cbtw, cwtd in 16 bit data mode.
1622         * i386-dis.c (putop): extra case W to support above.
1623
1624         * i386-dis.c (print_insn_x86): print addr32 prefix when given
1625         address size prefix in 16 bit address mode.
1626
1627 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
1628
1629         * sh-dis.c: Reindent.  Rename local variable fprintf to
1630         fprintf_fn.
1631
1632 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
1633
1634         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1635
1636 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
1637
1638         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1639           field membership.
1640         * mips16-opc.c (mip16_opcodes): same.
1641
1642 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
1643
1644         * m68k-opc.c (moveb): Change $d to %d.
1645
1646 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
1647
1648         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1649         (twobyte_has_modrm): Likewise.
1650         (grps): Likewise.
1651         (OP_MMX, OP_EM, OP_MS): New static functions.
1652
1653         * i386-dis.c: Revert patch of April 4.  The output now matches
1654         what gcc generates.
1655
1656 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
1657
1658         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1659         of $simm16.
1660
1661 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
1662
1663         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1664
1665 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
1666
1667         * Makefile.in (install): Depend upon installdirs.
1668         (installdirs): New target.
1669
1670 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
1671
1672         From Thomas Graichen <graichen@rzpd.de>:
1673         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1674         * configure: Rebuild.
1675
1676 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
1677
1678         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1679         Delete string{,s}.h support.
1680
1681 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
1682
1683         * cgen-asm.c (cgen_parse_operand_fn): New global.
1684         (cgen_parse_{{,un}signed_integer,address}): Update call to
1685         cgen_parse_operand_fn.
1686         (cgen_init_parse_operand): New function.
1687         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1688         from cgen_asm_init_parse.
1689         (m32r_cgen_assemble_insn): New operand `errmsg'.
1690         Delete call to as_bad, return error message to caller.
1691         (m32r_cgen_asm_hash_keywords): #if 0 out.
1692
1693 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1694
1695         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1696         not data register.
1697         [case 'J']: Fix typo in register name.
1698
1699 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
1700
1701         * configure.in: Substitute SHLIB_LIBS.
1702         * configure: Rebuild.
1703         * Makefile.in (SHLIB_LIBS): New variable.
1704         ($(SHLIB)): Use $(SHLIB_LIBS).
1705
1706 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
1707
1708         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1709
1710         * cgen-opc.c (hash_keyword_name): Improve algorithm.
1711
1712         * disassemble.c (disassembler): Handle m32r.
1713
1714 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
1715
1716         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1717         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1718         * Makefile.in (CFILES): Add them.
1719         (ALL_MACHINES): Add them.
1720         (dependencies): Regenerate.
1721         * configure.in (cgen_files): New variable.
1722         (bfd_m32r_arch): Add entry.
1723         * configure: Regenerate.
1724
1725 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
1726
1727         * configure.in: Correct file names for bfd_mn10[23]00_arch.
1728         * configure: Rebuild.
1729
1730         * Makefile.in: Rebuild dependencies.
1731
1732         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1733
1734         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
1735         fdivp.
1736
1737 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
1738
1739         * Branched binutils 2.8.
1740
1741 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
1742
1743         * m10200-dis.c: Rename from mn10200-dis.c.
1744         * m10200-opc.c: Rename from mn10200-opc.c.
1745         * m10300-dis.c: Rename from mn10300-dis.c
1746         * m10300-opc.c: Rename from mn10300-opc.c.
1747         * Makefile.in: Update accordingly.
1748
1749         * mips16-opc.c: Add mul and dmul macros.
1750
1751 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
1752
1753         * makefile.vms: Update CFLAGS, add clean target.
1754
1755 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
1756
1757         * mips-opc.c: Add "wait".  From Ralf Baechle
1758         <ralf@gnu.ai.mit.edu>.
1759
1760         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1761         * configure, config.in: Rebuild.
1762         * sysdep.h: Include <stdlib.h> if it exists.
1763         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
1764         <string.h>.
1765         * Makefile.in: Rebuild dependencies.
1766
1767 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
1768
1769         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
1770         Andrew Bray <andy@madhouse.demon.co.uk>.
1771
1772         * mips-opc.c: Add cast when setting mips_opcodes.
1773
1774 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
1775
1776         * v850-dis.c (disassemble):  Fix sign extension problem.
1777         * v850-opc.c (extract_d*):  Fix sign extension problems to make
1778         disassembly calculate branch offsets correctly.
1779
1780 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
1781
1782         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1783
1784         * mips-opc.c: Add dctr and dctw.
1785
1786 start-sanitize-d30v
1787 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1788
1789         * d30v-dis.c (print_insn): Change the way signed constants
1790         are displayed.
1791 end-sanitize-d30v
1792 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
1793
1794         * Makefile.in (BFD_H): New variable.
1795         (HFILES): New variable.
1796         (CFILES): Add all C files.
1797         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1798         Delete old dependencies, and build new ones.
1799         * dep-in.sed: New file.
1800
1801 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
1802
1803         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1804
1805 start-sanitize-coldfire
1806 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
1807
1808         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1809         instructions.
1810
1811 end-sanitize-coldfire
1812 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
1813
1814         * mn10200-opc.c: Change "trap" to "syscall".
1815         * mn10300-opc.c: Add new "syscall" instruction.
1816
1817 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
1818
1819         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1820         mulul insns on the coldfire.
1821
1822 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
1823
1824         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1825         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1826         (print_insn_little_arm): Likewise.
1827
1828 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
1829
1830         Based on patches from H.J. Lu <hjl@lucon.org>:
1831         * i386-dis.c (fetch_data): Add prototype.
1832         * m68k-dis.c (fetch_data): Add prototype.
1833         (dummy_print_address): Add prototype.  Make static.
1834         * ppc-opc.c (valid_bo): Add prototype.
1835         * sparc-dis.c (build_hash_table): Add prototype.
1836         (is_delayed_branch, compute_arch_mask): Add prototypes.
1837         (print_insn_sparc): Make several local variables const.
1838         (compare_opcodes): Change arguments to const PTR.  Add prototype.
1839         * sparc-opc.c (arg): Change name field to be const.
1840         (lookup_name, lookup_value): Add prototypes.  Change table and
1841         name parameters to be const.
1842         (sparc_encode_asi): Change name parameter to be const.
1843         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1844         (sparc_encode_sparclet_cpreg): Likewise.
1845         (sparc_decode_asi): Change return type to be const.
1846         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1847         (sparc_decode_sparclet_cpreg): Likewise.
1848
1849 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
1850
1851         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1852         Solaris doesn't like the combined options, and the -f is
1853         unnecessary.
1854         (stamp-tshlink, install): Likewise.
1855
1856 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
1857
1858         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1859         as relaxable.
1860
1861 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
1862
1863         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1864
1865 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
1866
1867         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1868         the mc68000.
1869
1870 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
1871
1872         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1873
1874 start-sanitize-tic80
1875 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
1876
1877         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1878
1879 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
1880
1881         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1882
1883 end-sanitize-tic80
1884 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1885
1886         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1887         floatformat_to_double to make portable.
1888         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1889         precision float.
1890
1891 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
1892
1893         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1894         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1895
1896 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1897
1898         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1899         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1900
1901 start-sanitize-tic80
1902 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
1903
1904         * tic80-opc.c (LSI_SCALED): Renamed from this ...
1905         (OFF_SL_BR_SCALED): ... to this, and added the flag
1906         TIC80_OPERAND_BASEREL to the flags word.
1907         (tic80_opcodes): Replace all occurances of LSI_SCALED with
1908         OFF_SL_BR_SCALED.
1909
1910 end-sanitize-tic80
1911 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
1912
1913         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1914         Change mips_opcodes from const array to a pointer,
1915         and change bfd_mips_num_opcodes from const int to int,
1916         so that we can increase the size of the mips opcodes table
1917         dynamically.
1918
1919 start-sanitize-tic80
1920 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
1921
1922         * tic80-opc.c (tic80_predefined_symbols): Revert change to
1923         store BITNUM values in the table in one's complement form
1924         to match behavior when assembler is given a raw numeric
1925         value for a BITNUM operand.
1926         * tic80-dis.c (print_operand_bitnum): Ditto.
1927
1928 end-sanitize-tic80
1929 start-sanitize-d30v
1930 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1931
1932         * d30v-opc.c: Removed references to FLAG_X.
1933
1934 end-sanitize-d30v
1935 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
1936
1937         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1938
1939 start-sanitize-d30v
1940 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1941
1942         * Makefile.in: Added d30v object files.
1943         * configure: (bfd_d30v_arch) Rebuilt.
1944         * configure.in: (bfd_d30v_arch) Added new case.
1945         * d30v-dis.c: New file.
1946         * d30v-opc.c: New file.
1947         * disassemble.c (disassembler) Add entry for d30v.
1948
1949 end-sanitize-d30v
1950 start-sanitize-tic80
1951 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
1952
1953         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1954         representations for the floating point BITNUM values.
1955
1956 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
1957
1958         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1959         in the table in one's complement form, as they appear in the
1960         actual instruction.
1961         (tic80_symbol_to_value): Use macros to access predefined
1962         symbol fields.
1963         (tic80_value_to_symbol): Ditto.
1964         (tic80_next_predefined_symbol): New function.
1965         * tic80-dis.c (print_operand_bitnum): Remove code that did
1966         one's complement for BITNUM values.
1967
1968 end-sanitize-tic80
1969 start-sanitize-r5900
1970 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
1971
1972         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1973
1974 end-sanitize-r5900
1975 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
1976
1977         * makefile.vms: Remove 8 bit characters.  Update to latest
1978         gcc release.
1979
1980 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
1981
1982         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1983
1984 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
1985
1986         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1987         (IMM24_PCREL): Likewise.
1988
1989 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
1990
1991         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1992         address for an extended PC relative instruction that is not a
1993         branch.
1994
1995 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1996
1997         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1998         bytes_per_line.
1999
2000 start-sanitize-tic80
2001 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
2002
2003         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2004         (tic80_opcodes): Sort entries so that long immediate forms
2005         come after short immediate forms, making it easier for
2006         assembler to select the right one for a given operand.
2007
2008 end-sanitize-tic80
2009 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
2010
2011         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2012         display_endian.
2013         (print_insn_mips16): Likewise.
2014
2015 start-sanitize-r5900
2016 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
2017
2018         * mips-opc.c: add r5900.
2019
2020 end-sanitize-r5900
2021 start-sanitize-tic80
2022 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
2023
2024         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2025         a symbol class that restricts translation to just that
2026         class (general register, condition code, etc).
2027
2028 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
2029
2030         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2031         and REG_DEST_E for register operands that have to be
2032         an even numbered register.  Add REG_FPA for operands that
2033         are one of the floating point accumulator registers.
2034         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2035         (tic80_opcodes): Change entries that need even numbered
2036         register operands to use the new operand table entries.
2037         Add "or" entries that are identical to "or.tt" entries.
2038
2039 end-sanitize-tic80
2040 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2041
2042         * mips16-opc.c: Add new cases of exit instruction for
2043         disassembler.
2044         * mips-dis.c (print_mips16_insn_arg): Display floating point
2045         registers in operands of exit instruction.  Print `$' before
2046         register names in operands of entry and exit instructions.
2047
2048 start-sanitize-tic80
2049 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
2050
2051         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2052         pairs for all predefined symbols recognized by the assembler.
2053         Also used by the disassembling routines.
2054         (tic80_symbol_to_value): New function.
2055         (tic80_value_to_symbol): New function.
2056         * tic80-dis.c (print_operand_control_register,
2057         print_operand_condition_code, print_operand_bitnum):
2058         Remove private tables and use tic80_value_to_symbol function.
2059
2060 end-sanitize-tic80
2061 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2062
2063         * d10v-dis.c (print_operand): Change address printing
2064         to correctly handle PC wrapping.  Fixes PR11490.
2065
2066 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
2067
2068         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2069         branches relaxable.
2070
2071 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
2072
2073         * mips-dis.c (print_insn_mips16): Set insn_info information.
2074         (print_mips16_insn_arg): Likewise.
2075
2076         * mips-dis.c (print_insn_mips16): Better handling of an extend
2077         opcode followed by an instruction which can not be extended.
2078
2079 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
2080
2081         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2082         coldfire moveb instruction to not allow an address register as
2083         destination.  Although the documentation does not indicate that
2084         this is invalid, experiments uncovered unexpected behavior.
2085         Added a comment explaining the situation.  Thanks to Andreas
2086         Schwab for pointing this out to me.
2087
2088 start-sanitize-tic80
2089 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
2090
2091         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2092         entries are presorted so that entries with the same mnemonic are
2093         adjacent to each other in the table.  Sort the entries for each
2094         instruction so that this is true.
2095
2096 end-sanitize-tic80
2097 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2098
2099         * m68k-dis.c: Include <libiberty.h>.
2100         (print_insn_m68k): Sort the opcode table on the most significant
2101         nibble of the opcode.
2102
2103 start-sanitize-tic80
2104 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
2105
2106         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2107         "vsub", "vst", "xnor", and "xor" instructions.
2108         (V_a1): Renamed from V_a, msb of accumulator reg number.
2109         (V_a0): Add macro, lsb of accumulator reg number.
2110
2111 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
2112
2113         * tic80-dis.c (print_insn_tic80): Broke excessively long
2114         function up into several smaller ones and arranged for
2115         the instruction printing function to be callable recursively
2116         to print vector instructions that have both a load and a
2117         math instruction packed into a single opcode.
2118         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2119         to explain why it comes after the other vector opcodes.
2120
2121 end-sanitize-tic80
2122 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2123
2124         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2125         move insns to handle immediate operands.
2126
2127 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2128
2129         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2130         fix operand mask in the "moveml" entries for the coldfire.
2131
2132 start-sanitize-tic80
2133 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
2134
2135         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2136         New macros for building vector instruction opcodes.
2137         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2138         FMT_LI, which were unused.  The field is now a flags field.
2139         Remove some opcodes that are possible, but illegal, such
2140         as long immediate instructions with doubles for immediate
2141         values.  Add "vadd" and "vld" instructions.
2142
2143 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
2144
2145         * tic80-opc.c (tic80_operands): Reorder some table entries to make
2146         the order more logical.  Move the shift alias instructions ("rotl",
2147         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2148         interspersed with the regular sr.x and sl.x instructions.  Add
2149         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2150         "sub", "subu", "swcr", and "trap".
2151
2152 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
2153
2154         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2155         (OFF_SL_PC): Renamed from OFF_SL.
2156         (OFF_SS_BR): New operand type for base relative operand.
2157         (OFF_SL_BR): New operand type for base relative operand.
2158         (REG_BASE): New operand type for base register operand.
2159         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2160         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2161         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2162         instructions.
2163         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2164         10 char field, padded with spaces on rhs, rather than a string
2165         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
2166         than old TIC80_OPERAND_RELATIVE.  Add support for new
2167         TIC80_OPERAND_BASEREL flag bit.
2168
2169 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
2170
2171         * tic80-dis.c (print_insn_tic80): Print floating point operands
2172         as floats.
2173         * tic80-opc.c (SPFI): Add single precision floating point
2174         immediate operand type.
2175         (ROTATE): Add rotate operand type for shifts.
2176         (ENDMASK): Add for shifts.
2177         (n): Macro for the 'n' bit.
2178         (i): Macro for the 'i' bit.
2179         (PD): Macro for the 'PD' field.
2180         (P2): Macro for the 'P2' field.
2181         (P1): Macro for the 'P1' field.
2182         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2183         "fcmp", and "fdiv".
2184
2185 end-sanitize-tic80
2186 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
2187
2188         * mn10200-dis.c (disassemble): Mask off unwanted bits after
2189         adding in current address for pc-relative operands.
2190
2191 start-sanitize-tic80
2192 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
2193
2194         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2195         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2196         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2197         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2198         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2199         REG_BASE_M_SI, REG_BASE_M_LI respectively.
2200         (REG_SCALED, LSI_SCALED): New operand types.
2201         (E): New macro for 'E' bit at bit 27.
2202         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2203         opcodes, including the various size flavors (b,h,w,d) for
2204         the direct load and store instructions.
2205
2206 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
2207
2208         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2209         in an instruction.
2210         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2211         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2212         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2213         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2214         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2215         masks with "MASK_* & ~M_*" to get the M bit reset.
2216         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2217
2218 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
2219
2220         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2221         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
2222         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2223         form.
2224         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2225         CC, SICR, and LICR table entries.
2226         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2227         "bcnd", and "brcr" opcodes.
2228
2229 end-sanitize-tic80
2230 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
2231
2232         * ppc-opc.c (powerpc_operands): Make comment match the
2233         actual fields (no shift field).
2234         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2235 start-sanitize-tic80
2236         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2237         partial implementation, work in progress.
2238         * tic80-opc.c (tic80_operands): Begin construction operands table.
2239         (tic80_opcodes): Continue populating opcodes table and start
2240         filling in the operand indices.
2241         (tic80_num_opcodes): Add this.
2242 end-sanitize-tic80
2243
2244 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2245
2246         * m68k-opc.c: Add #B case for moveq.
2247
2248 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
2249
2250         * mn10300-dis.c (disassemble): Make sure all variables are initialized
2251         before they are used.
2252
2253 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
2254
2255         * v850-opc.c (v850_opcodes): Put curly-braces around operands
2256         for "breakpoint" instruction.
2257
2258 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
2259
2260         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2261         (dep): Use ALL_CFLAGS rather than CFLAGS.
2262
2263 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2264
2265         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2266         flag.
2267
2268 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
2269
2270         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2271 start-sanitize-tic80
2272         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2273 end-sanitize-tic80
2274
2275 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2276
2277         * mips16-opc.c: Add "abs".
2278
2279 start-sanitize-tic80
2280 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
2281
2282         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2283         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2284         (disassembler): Add bfd_arch_tic80 support to set disassemble
2285         to print_insn_tic80.
2286         * tic80-dis.c (print_insn_tic80): Add stub.
2287
2288 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
2289
2290         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2291         * configure: Regenerate with autoconf.
2292         * tic80-dis.c: Add file.
2293         * tic80-opc.c: Add file.
2294
2295 end-sanitize-tic80
2296 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2297
2298         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
2299
2300 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
2301
2302         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2303         (mn10200_opcodes): Use it for some logicals and btst insns.
2304         Add "break" and "trap" instructions.
2305
2306         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2307
2308         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2309
2310 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2311
2312         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2313         relative load or add now depends upon whether the instruction is
2314         in a delay slot.
2315
2316 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
2317
2318         * mn10200-dis.c: Finish writing disassembler.
2319         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2320         Fix mask for "jmp (an)".
2321
2322         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2323         handle endianness issues for mn10300.
2324
2325         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2326
2327 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
2328
2329         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2330         instruction.  Fix opcode field for "movb (imm24),dn".
2331
2332         * mn10200-opc.c (mn10200_operands): Fix insertion position
2333         for DI operand.
2334
2335 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
2336
2337         * mn10200-opc.c: Create mn10200 opcode table.
2338         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
2339         but moving along nicely.
2340
2341 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2342
2343         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
2344
2345 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
2346
2347         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2348         specifiers for fmovem* instructions.
2349
2350 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
2351
2352         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2353
2354 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
2355
2356         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2357         with dsrl.
2358
2359 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
2360
2361         * mn10300-opc.c: Add some comments explaining the various
2362         operands and such.
2363
2364         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2365
2366 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2367
2368         * m68k-dis.c (print_insn_arg): Handle new < and > operand
2369         specifiers.
2370
2371         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2372         operand specifiers in fmovm* instructions.
2373
2374 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
2375
2376         * ppc-opc.c (insert_li): Give an error if the offset has the two
2377         least significant bits set.
2378
2379 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2380
2381         * mips-dis.c (print_insn_mips16): Separate the instruction from
2382         the arguments with a tab, not a space.
2383
2384 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
2385
2386         * mn10300-dis.c (disasemble): Finish conversion to '$' as
2387         register prefix.
2388
2389         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2390         mov am,(imm32,sp).
2391
2392 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
2393
2394         * configure: Rebuild with autoconf 2.12.
2395
2396         Add support for mips16 (16 bit MIPS implementation):
2397         * mips16-opc.c: New file.
2398         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2399         (mips16_reg_names): New static array.
2400         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2401         after seeing a 16 bit symbol.
2402         (print_insn_little_mips): Likewise.
2403         (print_insn_mips16): New static function.
2404         (print_mips16_insn_arg): New static function.
2405         * mips-opc.c: Add jalx instruction.
2406         * Makefile.in (mips16-opc.o): New target.
2407         * configure.in: Use mips16-opc.o for bfd_mips_arch.
2408         * configure: Rebuild.
2409
2410 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
2411
2412         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2413         operand specifiers in *save, *restore and movem* instructions.
2414
2415         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2416         the coldfire.
2417
2418         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2419         register operands for immediate arithmetic, not, neg, negx, and
2420         set according to condition instructions.
2421
2422         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2423         specifier of the effective-address operand in immediate forms of
2424         arithmetic instructions.  The specifier for the immediate operand
2425         notes how and where the constant will be stored.
2426
2427 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
2428
2429         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2430         opcode.
2431
2432         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2433         register prefix.
2434
2435         * mn10300-dis.c (disassemble): Prefix registers with '%'.
2436
2437 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
2438
2439         * mn10300-dis.c (disassemble): Handle register lists.
2440
2441         * mn10300-opc.c: Fix handling of register list operand for
2442         "call", "ret", and "rets" instructions.
2443
2444         * mn10300-dis.c (disassemble): Print PC-relative and memory
2445         addresses symbolically if possible.
2446         * mn10300-opc.c: Distinguish between absolute memory addresses,
2447         pc-relative offsets & random immediates.
2448
2449         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2450         in 7 byte insns.
2451         (disassemble): Handle SPLIT and EXTENDED operands.
2452
2453 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
2454
2455         * mn10300-dis.c: Rough cut at printing some operands.
2456
2457         * mn10300-dis.c: Start working on disassembler support.
2458         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2459
2460         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2461         list.
2462         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2463
2464 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2465
2466         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2467
2468 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
2469
2470         * mn10300-opc.c (mn10300_opcodes): Demand parens around
2471         register argument is calls and jmp instructions.
2472
2473 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
2474
2475         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2476         getx operand.  Fix opcode for mulqu imm,dn.
2477
2478 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
2479
2480         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2481         in MN10300_OPERAND_SPLIT operands for how many bits
2482         appear in the basic insn word.  Add IMM32_HIGH24,
2483         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2484         (mn10300_opcodes): Use new operands as needed.
2485
2486         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2487         for bset, bclr, btst instructions.
2488         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2489
2490         * mn10300-opc.c (mn10300_operands): Remove many redundant
2491         operands.  Update opcode table as appropriate.
2492         (IMM32): Add MN10300_OPERAND_SPLIT flag.
2493         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2494
2495 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
2496
2497         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2498         operands (for indexed load/stores).  Fix bitpos for DI
2499         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2500         few instructions that insert immediates/displacements in the
2501         middle of the instruction.  Add IMM8E for 8 bit immediate in
2502         the extended part of an instruction.
2503         (mn10300_operands): Use new opcodes as appropriate.
2504
2505 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2506
2507         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2508         sequential so the assembler never parallelizes it with
2509         other instructions.
2510
2511 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
2512
2513         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2514         a data/address register that appears in register field 0
2515         and register field 1.
2516         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2517
2518 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
2519
2520         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2521         standard disassembly.
2522
2523         * alpha-opc.c (alpha_operands): Rearrange flags slot.
2524         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2525         Recategorize PALcode instructions.
2526
2527 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
2528
2529         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2530
2531 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
2532
2533         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2534         there are no operand types.
2535
2536 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
2537
2538         * v850-opc.c (D9_RELAX): Renamed from D9, all references
2539         changed.
2540         (v850_operands): Make sure D22 immediately follows D9_RELAX.
2541
2542 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
2543
2544         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2545
2546 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
2547
2548         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2549         and sst.w instructions.
2550
2551         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2552         "bCC"instructions).
2553
2554 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2555
2556         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2557         and the arguments.
2558
2559 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
2560
2561         * ppc-opc.c (PPCPWR2): Define.
2562         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2563         it.
2564
2565 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
2566
2567         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2568         field for movhu instruction.
2569
2570         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2571         cast value to "long" not "signed long" to keep hpux10
2572         compiler quiet.
2573
2574 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
2575
2576         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2577         for mov (abs16),DN.
2578
2579         * mn10300-opc.c (FMT*): Remove definitions.
2580
2581         * mn10300-opc.c (mn10300_opcodes): Fix destination register
2582         for shift-by-register opcodes.
2583
2584         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2585         into [AD][MN][01] for encoding the position of the register
2586         in the opcode.
2587
2588 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
2589
2590         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2591         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2592
2593 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
2594
2595         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2596         Fix various typos.  Add "PAREN" operand.
2597         (MEM, MEM2): Define.
2598         (mn10300_opcodes): Surround all memory addresses with "PAREN"
2599         operands.  Fix several typos.
2600
2601         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2602         changes.
2603
2604 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
2605
2606         * mn10300-opc.c (FMT_XX): Renumber starting at one.
2607         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
2608         at this time.
2609         (mn10300_opcodes): Break opcode format out into its own field.
2610         Update many operand fields to deal with signed vs unsigned
2611         issues.  Fix one or two typos in the "mov" instruction
2612         opcode, mask and/or operand fields.
2613
2614 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2615
2616         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2617         m68851 wasn't reset.
2618
2619 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
2620
2621         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2622         all opcodes.  Very rough cut at operands for all opcodes.
2623
2624         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2625         opcode table.
2626
2627 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
2628
2629         * mn10200-opc.c, mn10300-opc.c: New files.
2630         * mn10200-dis.c, mn10300-dis.c: New files.
2631         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2632         * disassemble.c: Break mn10x00 support into 10200 and 10300
2633         support.
2634         * configure.in: Likewise.
2635         * configure: Rebuilt.
2636
2637 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
2638
2639         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2640
2641 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
2642
2643         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2644         MN10x00 processors.
2645         * disassemble (ARCH_mn10x00): Define.
2646         (disassembler): Handle bfd_arch_mn10x00.
2647         * configure.in: Recognize bfd_mn10x00_arch.
2648         * configure: Rebuilt.
2649
2650 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
2651
2652         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
2653         accordingly.  Don't declare functions using op_rtn.
2654
2655 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
2656
2657         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
2658         params to be more standard.
2659         * (disassemble):  Print absolute addresses and symbolic names for
2660         branch and jump targets.
2661         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
2662         bit operands.
2663         * (v850_opcodes):  Add breakpoint insn.
2664
2665 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
2666
2667         * m68k-opc.c: Move the fmovemx data register cases before the
2668         other cases, so that they get recognized before the data register
2669         does gets treated as a degenerate register list.
2670
2671 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
2672
2673         * mips-opc.c: Add a case for "div" and "divu" with two registers
2674         and a destination of $0.
2675
2676 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
2677
2678         * mips-dis.c (print_insn_arg): Add prototype.
2679         (_print_insn_mips): Ditto.
2680
2681 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
2682
2683         * mips-dis.c (print_insn_arg): Print condition code registers as
2684         $fccN.
2685
2686 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
2687
2688         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2689
2690 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
2691
2692         * v850-dis.c (disassemble): Make static.  Provide prototype.
2693
2694 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
2695
2696         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2697         in range checks.
2698
2699 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
2700
2701         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2702         ']' characters into the output stream.
2703         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2704         Add "memop" field to all opcodes (for the disassembler).
2705         Reorder opcodes so that "nop" comes before "mov" and "jr"
2706         comes before "jarl".
2707
2708         * v850-dis.c (print_insn_v850): Fix typo in last change.
2709
2710         * v850-dis.c (print_insn_v850): Properly handle disassembling
2711         a two byte insn at the end of a memory region when the memory
2712         region's size is only two byte aligned.
2713
2714         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2715
2716         * v850-dis.c (v850_reg_names): Define.
2717         (v850_sreg_names, v850_cc_names): Likewise.
2718         (disassemble): Very rough cut at printing operands (unformatted).
2719
2720         * v850-opc.c (BOP_MASK): Fix.
2721         (v850_opcodes): Fix mask for jarl and jr.
2722
2723         * v850-dis.c: New file.  Skeleton for disassembler support.
2724         * Makefile.in Remove v850 references, they're not needed here.
2725         * configure.in: Add v850-dis.o when building v850 toolchains.
2726         * configure: Rebuilt.
2727         * disassemble.c (disassembler): Call v850 disassembler.
2728
2729         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2730         (insert_d8_6, extract_d8_6): New functions.
2731         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2732         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2733         Add D8_6.
2734         (IF4A, IF4B): Use "D7" instead of "D7S".
2735         (IF4C, IF4D): Use "D8_7" instead of "D8".
2736         (IF4E, IF4F): New.  Use "D8_6".
2737         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
2738         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
2739
2740         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2741         (v850_operands): Change D16 to D16_15, use special insert/extract
2742         routines.  New new D16 that uses the generic insert/extract code.
2743         (IF7A, IF7B): Use D16_15.
2744         (IF7C, IF7D): New.  Use D16.
2745         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2746
2747         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2748         message.  Issue an error if the branch offset is odd.
2749
2750         * v850-opc.c: Add notes about needing special insert/extract
2751         for all the load/store insns, except "ld.b" and "st.b".
2752
2753         * v850-opc.c (insert_d22, extract_d22): New functions.
2754         (v850_operands): Use insert_d22 and extract_d22 for
2755         D22 operands.
2756         (insert_d9): Fix range check.
2757
2758 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
2759
2760         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2761         and set bits field to D9 and D22 operands.
2762
2763 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
2764
2765         * v850-opc.c (v850_operands): Define SR2 operand.
2766         (v850_opcodes): "ldsr" uses R1,SR2.
2767
2768         * v850-opc.c (v850_opcodes): Fix opcode specs for
2769         sld.w, sst.b, sst.h, sst.w, and nop.
2770
2771 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
2772
2773         * v850-opc.c (v850_opcodes): Add null opcode to mark the
2774         end of the opcode table.
2775
2776 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2777
2778         * d10v-opc.c (pre_defined_registers): Added register pairs,
2779         "r0-r1", "r2-r3", etc.
2780
2781 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
2782
2783         * v850-opc.c (v850_operands): Make I16 be a signed operand.
2784         Create I16U for an unsigned 16bit mmediate operand.
2785         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2786
2787         * v850-opc.c (v850_operands): Define EP operand.
2788         (IF4A, IF4B, IF4C, IF4D): Use EP.
2789
2790         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2791         with immediate operand, "movhi".  Tweak "ldsr".
2792
2793         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2794         correct.  Get sld.[bhw] and sst.[bhw] closer.
2795
2796         * v850-opc.c (v850_operands): "not" is a two byte insn
2797
2798         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2799
2800         * v850-opc.c (v850_operands): D16 inserts at offset 16!
2801
2802         * v850-opc.c (two): Get order of words correct.
2803
2804         * v850-opc.c (v850_operands): I16 inserts at offset 16!
2805
2806         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2807         register source and destination operands.
2808         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2809
2810         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
2811         same thinko in "trap" opcode.
2812
2813         * v850-opc.c (v850_opcodes): Add initializer for size field
2814         on all opcodes.
2815
2816         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
2817         Add D8 for 8-bit unsigned field in short load/store insns.
2818         (IF4A, IF4D): These both need two registers.
2819         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
2820         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2821         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
2822         for "ldsr" and "stsr".
2823         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2824         is unsigned.
2825
2826         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2827         short store word (sst.w).
2828
2829 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2830
2831         * v850-opc.c (v850_operands): Added insert and extract fields,
2832         pointers to functions that handle unusual operand encodings.
2833
2834 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
2835
2836         * v850-opc.c (v850_opcodes): Enable "trap".
2837
2838         * v850-opc.c (v850_opcodes): Fix order of displacement
2839         and register for "set1", "clr1", "not1", and "tst1".
2840
2841 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
2842
2843         * v850-opc.c (v850_operands): Add "B3" support.
2844         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2845         and "tst1".
2846
2847         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2848
2849         * v850-opc.c: Close unterminated comment.
2850
2851 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
2852
2853         * v850-opc.c (v850_operands): Add flags field.
2854         (v850_opcodes): add move opcodes.
2855
2856 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
2857
2858         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2859         * configure: (bfd_v850v_arch) Add new case.
2860         * configure.in: (bfd_v850_arch) Add new case.
2861         * v850-opc.c: New file.
2862
2863 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
2864
2865         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2866
2867 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2868
2869         * d10v-opc.c: Add additional information to the opcode
2870         table to help determinine which instructions can be done
2871         in parallel.
2872
2873 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
2874
2875         * mpw-make.sed: Update editing of include pathnames to be
2876         more general.
2877
2878 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
2879
2880         * arm-opc.h: Added "bx" instruction definition.
2881
2882 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
2883
2884         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2885
2886 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2887
2888         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2889
2890 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2891
2892         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2893
2894 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
2895
2896         * makefile.vms: Update for alpha-opc changes.
2897
2898 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
2899
2900         * i386-dis.c (print_insn_i386): Actually return the correct value.
2901         (ONE, OP_ONE): #ifdef out; not used.
2902
2903 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2904
2905         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2906         Changed subi operand type to treat 0 as 16.
2907
2908 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
2909
2910         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
2911         <rose@netcom.com>.
2912
2913 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
2914
2915         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2916         memory transfer instructions. Add new format string entries %h and %s.
2917         * arm-dis.c: (print_insn_arm): Provide decoding of the new
2918         formats %h and %s.
2919
2920 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2921
2922         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2923         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2924
2925 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
2926
2927         * alpha-dis.c (print_insn_alpha_osf): Remove.
2928         (print_insn_alpha_vms): Remove.
2929         (print_insn_alpha): Make globally visible.  Chose the register
2930         names based on info->flavour.
2931         * disassemble.c: Always return print_insn_alpha for the alpha.
2932
2933 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2934
2935         * d10v-dis.c (dis_long): Handle unknown opcodes.
2936
2937 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2938
2939         * d10v-opc.c: Changes to support signed and unsigned numbers.
2940         All instructions with the same name that have long and short forms
2941         now end in ".l" or ".s".  Divs added.
2942         * d10v-dis.c: Changes to support signed and unsigned numbers.
2943
2944 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2945
2946         * d10v-dis.c: Change all functions to use info->print_address_func.
2947
2948 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2949
2950         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2951         move ccr/sr insns more strict so that the disassembler only
2952         selects them when the addressing mode is data register.
2953
2954 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2955         * d10v-opc.c (pre_defined_registers):  Declare.
2956         * d10v-dis.c (print_operand): Now uses pre_defined_registers
2957         to pick a better name for the registers.
2958
2959 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
2960
2961         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
2962         operands for fexpand and fpmerge.  From Christian Kuehnke
2963         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2964
2965 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
2966
2967         * alpha-dis.c (print_insn_alpha): No longer the user-visible
2968         print routine.  Take new regnames and cpumask arguments.
2969         Kill the environment variable nonsense.
2970         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
2971         (print_insn_alpha_vms): New function.  Do VMS style regnames.
2972         * disassemble.c (disassembler): Test bfd flavour to pick
2973         between OSF and VMS routines.  Default to OSF.
2974
2975 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
2976
2977         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2978         * configure: Rebuild.
2979         * Makefile.in (install): Use @INSTALL_SHLIB@.
2980
2981 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2982
2983         * configure: (bfd_d10v_arch) Add new case.
2984         * configure.in: (bfd_d10v_arch) Add new case.
2985         * d10v-dis.c: New file.
2986         * d10v-opc.c: New file.
2987         * disassemble.c (disassembler) Add entry for d10v.
2988
2989 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2990
2991         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2992         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2993
2994 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
2995
2996         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
2997         distinguish between variants of the instruction set.
2998         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
2999         distinguish between variants of the instruction set.
3000
3001 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
3002
3003         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
3004         the 8086 instruction set.
3005         * i386-dis.c:  General cleanups.  Make most things static.  Add
3006         prototypes.  Get rid of static variables aflags and dflags.  Pass
3007         them as args (to almost everything).
3008
3009 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
3010
3011         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3012
3013         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3014
3015         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3016         if the next arg is marked with SRC_IN_DST.  Gross.
3017
3018         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3019         we're looking for and find EXR.
3020
3021         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3022         if we're looking for KBIT and we don't find it.
3023
3024         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3025         for L_3 and L_2.
3026
3027         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3028         3bit immediate operands.
3029
3030 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3031
3032         * Released binutils 2.7.
3033
3034         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
3035         <kkaempf@progis.ac-net.de>.
3036
3037 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3038
3039         * alpha-opc.c: Correct second case of "mov" to use OPRL.
3040
3041 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
3042
3043         * sparc-dis.c (print_insn_sparclite):  New routine to print
3044         sparclite instructions.
3045
3046 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3047
3048         * m68k-opc.c (m68k_opcodes): Add coldfire support.
3049
3050 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
3051
3052         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3053         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3054         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3055
3056 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3057
3058         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3059         Use autoconf-set values.
3060         (docdir, oldincludedir): Removed.
3061         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3062
3063 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
3064
3065         * alpha-opc.c: New file.
3066         * alpha-opc.h: Remove.
3067         * alpha-dis.c: Complete rewrite to use new opcode table.
3068         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3069         * configure: Rebuild with autoconf 2.10.
3070         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3071         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3072         alpha-opc.h.
3073         (alpha-opc.o): New target.
3074
3075 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
3076
3077         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3078         Set imm_added_to_rs1 even if the source and destination register
3079         are not the same.
3080
3081         * sparc-opc.c: Add some two operand forms of the wr instruction.
3082
3083 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
3084
3085         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3086         to just "mode".
3087
3088         * disassemble.c (disassembler): Handle H8/S.
3089         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3090
3091 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
3092
3093         * sparc-opc.c: Add beq/teq as aliases for be/te.
3094
3095         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
3096         <sergei@msil.sps.mot.com>.
3097
3098 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
3099
3100         * makefile.vms: New file.
3101
3102         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3103
3104 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
3105
3106         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3107         regardless of plen.
3108
3109 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
3110
3111         * i386-dis.c (OP_OFF): Call append_prefix.
3112
3113 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3114
3115         * ppc-opc.c (instruction encoding macros): Add explicit casts to
3116         unsigned long to silence a warning from the Solaris PowerPC
3117         compiler.
3118
3119 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
3120
3121         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3122
3123 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
3124
3125         * sparc-dis.c (X_IMM,X_SIMM): New macros.
3126         (X_IMM13): Delete.
3127         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
3128         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3129         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
3130         cpush, cpusha, cpull sparclet insns.
3131
3132 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
3133
3134         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3135
3136 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3137
3138         * sparc-opc.c: Set F_FBR on floating point branch instructions.
3139         Set F_FLOAT on other floating point instructions.
3140
3141 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3142
3143         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3144         registers.
3145         (powerpc_opcodes): Add 860/821 specific SPRs.
3146
3147 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
3148
3149         * configure.in: Permit --enable-shared to specify a list of
3150         directories.  Set and substitute BFD_PICLIST.
3151         * configure: Rebuild.
3152         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
3153         uses.  Set to @BFD_PICLIST@.
3154
3155 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
3156
3157         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3158         not "abs", which may be needed for the absolute in something
3159         like btst #0,@10:8.  Print L_3 immediates separately from other
3160         immediates.  Change ABSMOV reference to ABS8MEM.
3161
3162 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
3163
3164         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3165         (current_arch_mask): New static global.
3166         (compute_arch_mask): New static function.
3167         (print_insn_sparc): Delete sparc_v9_p.  New static local
3168         current_mach.  Resort opcode table if current_mach changes.
3169         Generalize "insn not supported" test.
3170         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3171         Delete test for v9/!v9.
3172         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3173         (v6notlet): Define.
3174         (brfc): Split into CBR and FBR for coprocessor/fp branches.
3175         (brfcx): Renamed to FBRX.
3176         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
3177         coprocessor mnemonics are not supported on the sparclet).
3178         (condf): Renamed to CONDF.
3179         (SLCBCC2): Delete F_ALIAS flag.
3180
3181 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
3182
3183         * sparc-opc.c (sparc_opcodes): rd must be 0 for
3184         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
3185
3186 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
3187
3188         * Makefile.in (config.status): Depend upon BFD VERSION file, so
3189         that the shared library version number is set correctly.
3190
3191 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
3192
3193         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
3194         Miles Bader <miles@gnu.ai.mit.edu>.
3195         * configure: Rebuild.
3196
3197 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
3198
3199         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3200         malloc.
3201
3202 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3203
3204         * configure: Rebuild with autoconf 2.8.
3205
3206 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3207
3208         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3209         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3210
3211 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
3212
3213         * configure.in: Don't set SHLIB or SHLINK to an empty string,
3214         since they appear as targets in Makefile.in.
3215         * configure: Rebuild.
3216
3217 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
3218
3219         * mpw-make.sed: Edit out shared library support bits.
3220
3221 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
3222
3223         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3224         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3225         (sparc_opcodes): Add sparclet insns.
3226         (sparclet_cpreg_table): New static local.
3227         (sparc_{encode,decode}_sparclet_cpreg): New functions.
3228         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3229
3230 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
3231
3232         * i386-dis.c (index16): New static variable.
3233         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3234         other way around.
3235         (OP_indirE): Return result of OP_E.
3236         (OP_E): Check for 16 bit addressing mode, and disassemble
3237         correctly.  Optimised 32 bit case a little.  Don't print
3238         "(base,index,scale)" when sib specifies only an offset.
3239
3240 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
3241
3242         * configure.in: Set and substitute SHLIB_DEP.
3243         * configure: Rebuild.
3244         * Makefile.in (SHLIB_DEP): New variable.
3245         (LIBIBERTY_LISTS, BFD_LIST): New variables.
3246         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
3247         COMMON_SHLIB, add them to piclist with appropriate modifications.
3248         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
3249         here: just use piclist.
3250
3251 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
3252
3253         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3254         (print_insn_sparc): Rewrite v9/not-v9 tests.
3255         (compare_opcodes): Likewise.
3256         * sparc-opc.c (MASK_<ARCH>): Define.
3257         (v6,v7,v8,sparclite,v9,v9a): Redefine.
3258         (sparclet,v6notv9): Define.
3259         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
3260         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3261
3262 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
3263
3264         * configure.in: Call AC_PROG_CC before configure.host.
3265         * configure: Rebuild.
3266
3267         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3268
3269 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
3270
3271         * i386-dis.c (onebyte_has_modrm): New static array.
3272         (twobyte_has_modrm): New static array.
3273         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3274
3275 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3276
3277         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3278         $(SHLINK).
3279
3280 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3281
3282         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3283         doesn't conflict.
3284
3285 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3286
3287         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3288         m68010up, not just m68020up | cpu32.
3289
3290         * Makefile.in (SONAME): New variable.
3291         ($(SHLINK)): Make a link to the transformed name, as well.
3292         (stamp-tshlink): New target.
3293         (install): Skip stamp-tshlink during install.
3294
3295 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3296
3297         * configure.in: Call AC_ARG_PROGRAM.
3298         * configure: Rebuild.
3299         * Makefile.in (program_transform_name): New variable.
3300         (install): Transform library name before installing it.
3301
3302 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
3303
3304         * i960-dis.c (mem): Add HX dcinva instruction.
3305
3306         Support for building as a shared library, based on patches from
3307         Alan Modra <alan@spri.levels.unisa.edu.au>:
3308         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3309         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3310         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3311         * configure: Rebuild.
3312         * Makefile.in (ALLLIBS): New variable.
3313         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3314         (COMMON_SHLIB, SHLINK): New variables.
3315         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3316         (STAGESTUFF): Remove variable.
3317         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3318         (stamp-piclist, piclist): New targets.
3319         ($(SHLIB), $(SHLINK)): New targets.
3320         ($(OFILES)): Depend upon stamp-picdir.
3321         (disassemble.o): Build twice if PICFLAG is set.
3322         (MOSTLYCLEAN): Add pic/*.o.
3323         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3324         (distclean): Remove pic and stamp-picdir.
3325         (install): Install shared libraries.
3326         (stamp-picdir): New target.
3327
3328 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
3329
3330         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3331         Print unknown instruction as "unknown", rather than in hex.
3332
3333 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
3334
3335         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3336
3337 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
3338
3339         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3340
3341 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
3342
3343         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3344         when necessary.  From Ulrich Drepper
3345         <drepper@myware.rz.uni-karlsruhe.de>.
3346
3347 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3348
3349         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3350         sparc_num_opcodes.  Update architecture enum values.
3351         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3352         (sparc_opcode_lookup_arch): New function.
3353         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3354         (sparc_opcodes): Add v9a shutdown insn.
3355
3356 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
3357
3358         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3359         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
3360         architecture.
3361         (print_insn_sparc64): Deleted.
3362         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3363         print_insn_sparc.
3364
3365         * sparc-opc.c (architecture_pname): Add v9a.
3366
3367 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
3368
3369         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3370         incorrectly defined as 0x16 when it should be 0x15.
3371         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3372         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
3373         excb (exception barrier) which is defined in the Alpha
3374         Architecture Handbook version 2.
3375         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3376         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
3377         disassembled as or, for example.
3378
3379 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
3380
3381         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3382         (_print_insn_mips): Change i from int to unsigned int.
3383
3384 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
3385
3386         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3387         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
3388
3389 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
3390
3391         * i386-dis.c: Added Pentium Pro instructions.
3392
3393 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3394
3395         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3396         being for Power2.
3397
3398 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3399
3400         * sh-opc.h (sh_nibble_type): Added REG_B.
3401         (sh_arg_type): Added A_REG_B.
3402         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3403         and stc.l opcodes.
3404         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3405
3406 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
3407
3408         * disassemble.c (disassembler): Use new bfd_big_endian macro.
3409
3410 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
3411
3412         * Makefile.in (distclean): Remove stamp-h.  From Ronald
3413         F. Guilmette <rfg@monkeys.com>.
3414
3415 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
3416
3417         From David Mosberger-Tang  <davidm@azstarnet.com>:
3418         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3419         instruction.
3420
3421 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3422
3423         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3424         (sh_table): Added many SH3 opcodes.
3425         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3426
3427 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3428
3429         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3430         (subco,subco.): Mark this PPC, not PPCCOM.
3431
3432 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
3433
3434         * configure: Rebuild with autoconf 2.7.
3435
3436 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
3437
3438         * configure: Rebuild with autoconf 2.6.
3439
3440 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
3441
3442         * configure.in: Sort list of architectures.  Accept but do nothing
3443         for alliant, convex, pyramid, romp, and tahoe.
3444
3445 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
3446
3447         * a29k-dis.c (print_special): Change num to unsigned int.
3448
3449 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
3450
3451         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3452         shifting it.
3453
3454 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
3455
3456         * configure.in: Call AC_CHECK_PROG to find and cache AR.
3457         * configure: Rebuilt.
3458
3459 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
3460
3461         * configure.in: Add case for bfd_i860_arch.
3462         * configure: Rebuild.
3463
3464 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
3465
3466         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3467         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3468         (NEXTDOUBLE): Likewise.
3469         (print_insn_m68k): Don't match fmoveml if there is more than one
3470         register in the list.
3471         (print_insn_arg): Handle a place of '8' for a type of 'L'.
3472
3473 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
3474
3475         * m68k-opc.c: Use #W rather than #w.
3476         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3477
3478 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
3479
3480         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3481         and likewise for all the dbxx opcodes.
3482
3483 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
3484
3485         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3486
3487 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
3488
3489         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3490         the VR4100 specific instructions to the mips_opcodes structure.
3491
3492 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
3493
3494         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3495         ugly Metrowerks bug in CW6, is fixed in CW7.
3496
3497 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3498
3499         * ppc-opc.c (whole file): Add flags for common/any support.
3500
3501 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
3502
3503         * Makefile.in (BISON): Remove macro.
3504         (FLAGS_TO_PASS): Remove BISON.
3505
3506 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
3507
3508         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3509
3510         * m68k-dis.c (print_insn_m68k): Recognize all two-word
3511         instructions that take no args by looking at the match mask.
3512         (print_insn_arg): Always print "%" before register names.
3513         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3514         [case '_']: Don't print "@#" before address.
3515         [case 'J']: Use "%s" as format string, not register name.
3516         [case 'B']: Treat place == 'C' like 'l' and 'L'.
3517
3518 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
3519
3520         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3521         name correctly.
3522
3523 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
3524
3525         From David Mosberger-Tang  <davidm@azstarnet.com>
3526
3527         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3528         (alpha_insn_set): added definitions for VAX floating point
3529         instructions (Unix compilers don't generate these, but handcoded
3530         assembly might still use them).
3531
3532         * alpha-dis.c (print_insn_alpha): added support for disassembling
3533         the miscellaneous instructions in the Alpha instruction set.
3534
3535 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
3536
3537         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3538         no longer create sysdep.h, sed ppc-opc.c to work around a
3539         serious Metrowerks C bug.
3540         * mpw-make.in: Remove.
3541         * mpw-make.sed: New file, used by mpw-configure to edit
3542         Makefile.in into an MPW makefile.
3543
3544 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
3545
3546         * Makefile.in (maintainer-clean): New synonym for realclean.
3547
3548 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3549
3550         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3551         which use '0', '1', and '2' instead.  Specify the proper size for
3552         a pmove immediate operand.  Correct the pmovefd patterns to be
3553         moves to a register, not from a register.
3554         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3555
3556 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
3557
3558         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3559         %psr, %wim, %tbr as F_NOTV9.
3560
3561 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
3562
3563         * Makefile.in (Makefile): Just rebuild Makefile when running
3564         config.status.
3565         (config.h, stamp-h): New targets.
3566         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3567         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
3568         rebuilding config.h.
3569         * configure: Rebuild.
3570
3571         * mips-opc.c: Change unaligned loads and stores with "t,A"
3572         operands to use "t,A(b)".
3573
3574 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3575
3576         * sh-dis.c (print_insn_shx): Add F_FR0 support.
3577
3578 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3579
3580         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3581         until 3 instead of until 2.
3582
3583 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
3584
3585         * Makefile.in (ALL_CFLAGS): Define.
3586         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3587         (MOSTLYCLEAN): Add config.log.
3588         (distclean): Don't remove config.log.
3589         * configure.in: Substitute HDEFINES.
3590         * configure: Rebuild.
3591
3592 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3593
3594         * sh-opc.h (sh_arg_type): Add F_FR0.
3595         (sh_table, case fmac): Add F_FR0 as first argument.
3596
3597 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3598
3599         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3600
3601 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
3602
3603         * sparc-dis.c: Remove all references to NO_V9.
3604
3605 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
3606
3607         * aclocal.m4: Just include ../bfd/aclocal.m4.
3608         * configure: Rebuild.
3609
3610 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
3611
3612         * sparc-dis.c (X_DISP19): Define.
3613         (print_insn, case 'G'): Use it.
3614         (print_insn, case 'L'): Sign extend displacement.
3615
3616 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
3617
3618         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3619         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
3620         host_makefile_frag or frags.
3621         * aclocal.m4: New file.
3622         * configure: Rebuild.
3623         * Makefile.in (INSTALL): Set to @INSTALL@.
3624         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3625         (INSTALL_DATA): Set to @INSTALL_DATA@.
3626         (AR): Set to @AR@.
3627         (AR_FLAGS): Set to rc rather than qc.
3628         (CC): Define as @CC@.
3629         (CFLAGS): Set to @CFLAGS@.
3630         (@host_makefile_frag@): Remove.
3631         (config.status): Remove dependency upon @frags@.
3632
3633         * configure.in: ../bfd/config.bfd now just sets shell variables.
3634         Use them rather than looking through target Makefile fragments.
3635         * configure: Rebuild.
3636
3637 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3638
3639         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3640
3641 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
3642
3643         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3644         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3645         sparc64 insns.
3646
3647         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3648         (lookup_{name,value}): New functions.
3649         (prefetch_table): New static local.
3650         (sparc_{encode,decode}_prefetch): New functions.
3651         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3652
3653 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3654
3655         * sh-opc.h: Add blank lines to improve readabililty of sh3e
3656         instructions.
3657
3658 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3659
3660         * sh-dis.c: Correct comment on first line of file.
3661
3662 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
3663
3664         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3665
3666         * sparc-opc.c (asi, membar): New static locals.
3667         (sparc_{encode,decode}_{asi,membar}): New functions.
3668         (sparc_opcodes, membar insn): Fix.
3669         * sparc-dis.c (print_insn): Call sparc_decode_asi.
3670         Support decoding of membar masks.
3671         (X_MEMBAR): Define.
3672
3673 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
3674
3675         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3676
3677 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3678
3679         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3680         and likewise for the other branches.  Add bhs as an alias for bcc,
3681         and likewise for the size variants.  Add dbhs as an alias for
3682         dbcc.
3683
3684 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
3685
3686         * sh-opc.h (FP sts instructions): Update to match reality.
3687
3688 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
3689
3690         * m68k-dis.c: (fpcr_names): Add % before all register names.
3691         (reg_names): Likewise.
3692         (print_insn_arg): Don't explicitly print % before register names.
3693         Add % before register names in static array names.  In case 'r',
3694         print data registers as `@(Dn)', not `Dn@'.  When printing a
3695         memory address, don't print @# before it.
3696         (print_indexed): Change base_disp and outer_disp from int to
3697         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
3698         syntax.  Sign extend 8 byte displacement correctly.
3699         (print_base): Print using MIT syntax.  Print zpc when appropriate.
3700         Change parameter disp from int to bfd_vma.
3701
3702         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3703         for jsr.
3704
3705 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
3706
3707         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3708         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3709         * sh-opc.h (sh_arg_type): Add new operand types.
3710         (sh_table): Add new opcodes from SH3E Floating Point ISA.
3711
3712 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
3713
3714         * Makefile.in (distclean): Remove generated file config.h.
3715
3716 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
3717
3718         * Makefile.in (distclean): Remove generated file config.h.
3719
3720 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
3721
3722         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3723         Clean up tables.
3724         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3725         (opcode): Remove.
3726         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
3727         rather than numopcodes.  Use m68k_opcodes rather than removed
3728         opcode function.  Don't check F_ALIAS.
3729         (print_insn_arg): Change first parameter to be const char *.
3730         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3731         (m68k-opc.o): New target.
3732         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3733         * configure: Rebuild.
3734
3735 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
3736
3737         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3738         (opcode_bits, opcode_hash_table): New variables.
3739         (opcodes_initialized): Renamed from opcodes_sorted.
3740         (build_hash_table): New function.
3741         (is_delayed_branch): Use hash table.
3742         (print_insn): Renamed from print_insn_sparc, made static.
3743         Build and use hash table.  If !sparc64, ignore sparc64 insns,
3744         and vice-versa if sparc64.
3745         (print_insn_sparc, print_insn_sparc64): New functions.
3746         (compare_opcodes): Move sparc64 opcodes to end.
3747         Print commutative insns with constant second.
3748         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3749
3750 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
3751
3752         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
3753         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
3754         avoids printing a delay slot in a delay slot.
3755         * sh-opc.h (sh_table): Fully bracket last entry.
3756
3757 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
3758
3759         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3760
3761 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
3762
3763         * configure.in: Get host_makefile_frag from ${srcdir}.
3764
3765         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
3766         config.h from config.in.  Don't set up sysdep.h link.
3767         * sysdep.h: New file.
3768         * configure, config.in: New files, generated from configure.in.
3769         * Makefile.in: Updated to be processed autoconf-style.
3770         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
3771         (Makefile): Depend on config.status.
3772         (config.status): New rule.
3773         * configure.bat: Update Makefile substitutions.
3774
3775 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
3776
3777         * mips-opc.c (L1): Define.
3778         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3779         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3780         and wb.
3781
3782 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
3783
3784         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3785         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3786         have multiple add units but only a single logical unit.
3787
3788         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3789         shifted by 18, without any insertion or extraction function.
3790         (insert_cr, extract_cr): Remove.
3791
3792 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3793
3794         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3795         register names.
3796
3797 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
3798
3799         * mpw-config.in: Add sh and i386 configs, remove sparc config.
3800         * sh-opc.h: Add copyright.
3801
3802 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
3803
3804         * Makefile.in (crunch-m68k): Delete extra target accidentally
3805         checked in a while ago.
3806
3807 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3808
3809         * sh-opc.h (sh_table): Add SH3 support.
3810
3811 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
3812
3813         * sh-opc.h: Added bsrf and braf.
3814
3815 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3816
3817         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
3818         bogus [ls]fm{ea,fd} patterns.
3819
3820         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3821         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3822         initialize it from memory.  Make function static.
3823         (print_insn_{big,little}_arm): New functions.
3824         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3825         the correct endianness.
3826
3827 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
3828
3829         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3830         enum list.
3831
3832 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3833
3834         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3835         17th, so that it builds again using GCC as the compiler.
3836
3837 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3838
3839         * mips-dis.c (print_insn_little_mips): Cast return value from
3840         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3841         expects an unsigned long, and that might be fewer words of
3842         argument storage (e.g., if bfd_vma is long long on a 32-bit
3843         machine).
3844         (print_insn_big_mips): Likewise with bfd_getb32 value.
3845         (_print_insn_mips): Now static.
3846
3847 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
3848
3849         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3850         gcc memory hog problem with initializer is fixed.
3851
3852 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
3853
3854         Merge in support for Mac MPW as a host.
3855         (Old change descriptions retained for informational value.)
3856
3857         * mpw-config.in (archname): Compute from the config.
3858         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3859
3860         * mpw-config.in (target_arch): Compute from canonical target.
3861         (m68k, mips, powerpc, sparc): Add architectures.
3862         * mpw-make.in (disassemble.c.o): Add.
3863         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3864
3865         * mpw-config.in (BFD_MACHINES): Set to a default value.
3866         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3867
3868         * mpw-make.in (CSEARCH): Add extra-include to search path.
3869
3870         * mpw-config.in (varargs.h): Don't create.
3871         (sysdep.h): Create using forward-include.
3872         * mpw-make.in (CSEARCH): Add include/mpw to search path.
3873
3874         * mpw-config.in: New file, MPW version of configure.in.
3875         * mpw-make.in: New file, MPW version of Makefile.in.
3876
3877 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3878
3879         * alpha-dis.c (print_insn_alpha): Put empty statement after
3880         default label.
3881
3882 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
3883
3884         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3885         (low_sign_extend): Likewise.
3886         (get_field): Delete unused function.
3887         (set_field, deposit_14, deposit_21): Likewise.
3888
3889 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3890
3891         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
3892           (guy@netapp.com).
3893
3894 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
3895
3896         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
3897
3898         * alpha-opc.h (OSF_ASMCODE): define
3899         print pal-code names as defined in App C of the
3900         Alpha Architecture Reference Manual
3901
3902         * alpha-dis.c: cleaned up output
3903         print stylized code forms as defined in App A.4.3 of the
3904         Alpha Architecture Reference Manual
3905
3906 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
3907
3908         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
3909         `rfe'.
3910         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3911         'N', and 'M'.
3912
3913 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
3914
3915         * m68k-dis.c (opcode): New function.  Returns address of opcode
3916         table entry given index, even if the opcode table was split to
3917         work around gcc bugs.
3918         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3919         directly.
3920         (BREAK_UP_BIG_DECL): Make secondary array static and const.
3921         (reg_names): Now const.
3922         (print_insn_arg): Arrays cacheFieldName and names now const.
3923         (print_indexed): Array scales now const.
3924
3925 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
3926
3927         * ppc-opc.c: Sort recently added instructions by minor opcode
3928         number within major opcode number.
3929
3930 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
3931
3932         * hppa-dis.c: Include libhppa.h.
3933
3934 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3935
3936         * mips-opc.c: Change dli to use M_DLI, and add dla.
3937
3938 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3939
3940         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
3941
3942 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
3943
3944         * mips-opc.c: Add r4650 mul instruction.
3945
3946 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
3947
3948         * mips-opc.c: Add uld and usd macros for unaligned double load and
3949         store.
3950
3951 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3952
3953         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3954         mfdcr, mtdcr, icbt, iccci.
3955
3956 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
3957
3958         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3959         signed char fields to shorts, more portable.
3960
3961 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
3962
3963         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3964         char fields as signed chars, since they may have negative values.
3965
3966 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3967
3968         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3969           (mycroft@netbsd.org).
3970
3971 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
3972
3973         From "Logg, Ed" <elogg@ea.com>:
3974         * ppc-opc.c (extract_bdm): Correct parenthezisation.
3975         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3976         value.
3977
3978 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
3979
3980         * ppc-opc.c: Changes based on patch from David Edelsohn
3981         <edelsohn@mhpcc.edu>.
3982         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3983         SPR.
3984         (FXM_MASK): Define.
3985         (insert_tbr): New static function.
3986         (extract_tbr): New static function.
3987         (XFXFXM_MASK, XFXM): Define.
3988         (XSPRBAT_MASK, XSPRG_MASK): Define.
3989         (powerpc_opcodes): Add instructions to access special registers by
3990         name.  Add mtcr and mftbu.
3991
3992 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3993
3994         * mips-opc.c (P3): Define.
3995         (mips_opcodes): Add mad and madu.
3996
3997 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
3998
3999         * configure.in: Add W65 support.
4000         * disassemble.c: Likewise.
4001         * w65-opc.h, w65-dis.c: New files.
4002
4003 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4004
4005         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4006         immediates.
4007
4008 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4009
4010         * mips-opc.c: Add dli as a synonym for li.
4011
4012 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4013
4014         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4015         print something for reserved opcode values, even if it won't
4016         assemble again.
4017
4018         * mips-dis.c (_print_insn_mips): When initializing, shift right
4019         and mask, to avoid sign extension problems on the Alpha.
4020
4021         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4022         control registers.
4023
4024 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4025
4026         * sh-opc.h (mov.l gbr): Get direction right.
4027         * sh-dis.c (print_insn_shx): New function.
4028         (print_insn_shl, print_insn_sh): Call print_insn_shx to
4029         print opcodes with right byte order.
4030
4031 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4032
4033         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4034         to avoid conflicts with getopt.
4035
4036 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4037
4038         * hppa-dis.c (print_insn_hppa): Read the instruction using
4039         bfd_getb32, so that it works on a little endian or 64 bit host.
4040         Remove unused local variable op.
4041
4042 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4043
4044         * mips-opc.c: Use or instead of addu for pseudo-op move, since
4045         addu does not work correctly if -mips3.
4046
4047 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4048
4049         * a29k-dis.c (print_special): Add special register names defined
4050         on 29030, 29040 and 29050.
4051         (print_insn): Handle new operand type 'I'.
4052
4053 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4054
4055         * Makefile.in (INSTALL): Use top level install.sh script.
4056
4057 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4058
4059         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4060         that it works on a little endian host.
4061
4062 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4063
4064         * configure.in: Use ${config_shell} when running config.bfd.
4065
4066 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4067
4068         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4069
4070 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4071
4072         * a29k-dis.c (print_insn): Print the opcode.
4073
4074 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4075
4076         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4077
4078 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
4079
4080         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4081
4082 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4083
4084         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4085         which store a value into memory.
4086
4087 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4088
4089         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4090         * arm-dis.c, arm-opc.h: New files.
4091
4092 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
4093
4094         * Makefile.in (ns32k-dis.o): Add dependency.
4095         * ns32k-dis.c (print_insn_arg): Declare initialized local as
4096         string, not as array of chars.
4097
4098 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4099
4100         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4101
4102         * sparc-opc.c: Added sparclite extended FP operations, and
4103         versions of v9 impdep* instructions permitting specification of
4104         the OPF field.
4105
4106 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4107
4108         * i960-dis.c (reg_names): Now const.
4109         (struct sparse_tabent): New type, copied from array type in mem
4110         function.
4111         (ctrl): Local static array ctrl_tab now const.
4112         (cobr): Local static array cobr_tab now const.
4113         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
4114         static variable mem_tab no longer explicitly initialized.  Changed
4115         mem_init to const array of struct sparse_tabent.
4116         (reg): Local static variable reg_tab no longer explicitly
4117         initialized.  Changed reg_init to const array of struct
4118         sparse_tabent.
4119         (ea): Local static array scale_tab now const.
4120
4121         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4122         (REG_MAX): Updated.
4123
4124 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
4125
4126         * configure.bat: the disassember needs to be enabled for
4127         "objdump -d" to work in djgpp.
4128
4129 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4130
4131         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4132         (invalid_float): Enabled general version, doesn't require running
4133         on ns32k host.  Changed to take char* argument, and test for
4134         explicitly specified sizes, instead of using sizeof() on host CPU
4135         types.
4136         (INVALID_FLOAT): Cast first argument.
4137         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4138         list_P032, list_M032): Now const.
4139         (optlist, list_search): Made appropriate arguments now point to
4140         const.
4141         (print_insn_arg): Changed static array of one-character-string
4142         pointers into a static const array of characters; fixed sprintf
4143         statement accordingly.
4144
4145 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
4146
4147         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
4148         from distribution. A ns32k-dis.c from a previous distribution has
4149         been brought up to date and supports the new interface.
4150
4151         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4152
4153         * configure.in: add bfd_ns32k_arch target support.
4154
4155         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4156         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4157
4158 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
4159
4160         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4161         disassembly right.
4162
4163 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
4164
4165         * h8300-dis.c, mips-dis.c: Don't use true and false.
4166
4167 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
4168
4169         * configure.in: Change --with-targets to --enable-targets.
4170
4171 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4172
4173         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4174         opcodes to the first instruction with that opcode, to speed
4175         disassembly of large files.  From ralphc@pyramid.com (Ralph
4176         Campbell).
4177
4178 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4179
4180         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4181
4182 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
4183
4184         * configure.bat: update to latest makefile.in
4185
4186 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
4187
4188         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4189         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4190         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4191         slot insn is in a delay slot.
4192         * z8k-opc.h: (resflg): Fix patterns.
4193         * h8500-opc.h Fix CR insn patterns.
4194
4195 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4196
4197         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4198         "cmpl" before POWER versions, so that gas -many uses them.
4199
4200 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4201
4202         * disassemble.c: New file.
4203         * Makefile.in (OFILES): Add disassemble.o.
4204         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4205         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
4206         binutils/configure.in.
4207
4208         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4209         opcode being examined.
4210
4211 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4212
4213         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4214         (insert_ral, insert_ram, insert_ras): New functions.
4215         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4216         RAS for store with update.
4217
4218 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4219
4220         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
4221         (edelsohn@npac.syr.edu).
4222
4223 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4224
4225         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4226         immediate argument.
4227
4228 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
4229
4230         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4231
4232 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4233
4234         * ppc-opc.c (powerpc_operands): The signedp field has been
4235         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
4236         instead.  Add new operand SISIGNOPT.
4237         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4238         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4239         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4240         than signedp field.
4241
4242 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4243
4244         * i386-dis.c (struct private):  Renamed to dis_private. `private'
4245         is a reserved word for dynix cc.
4246
4247 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4248
4249         * configure.in: Change error message to refer to bfd/config.bfd
4250         rather than bfd/configure.in.
4251
4252 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
4253
4254         * ppc-opc.c: Define POWER2 as short alias flag.
4255         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4256         fsqrt.
4257
4258 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4259
4260         * i960-dis.c (print_insn_i960): Don't read a second word for
4261         opcodes 0, 1, 2 and 3.
4262
4263 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4264
4265         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4266
4267 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4268
4269         * m68881-ext.c: Removed; no longer used.
4270         * Makefile.in: Changed accordingly.
4271
4272         * m68k-dis.c (ext_format_68881): Don't declare.
4273         (print_insn_m68k): If an instruction uses place 'i', it uses at
4274         least four fixed bytes.
4275         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
4276         extended float, convert to double using floatformat_to_double, not
4277         ieee_extended_to_double, and fetch the data before converting it.
4278
4279 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4280
4281         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
4282         davidj@ICSI.Berkeley.EDU (David Johnson).
4283
4284 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4285
4286         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4287         PowerPC uses bdnz[l][a].
4288
4289 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4290
4291         * dis-buf.c, i386-dis.c:  Include sysdep.h.
4292
4293 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4294
4295         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4296
4297         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4298         by Motorola PowerPC 601 with PPC_OPCODE_601.
4299         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4300         Disassemble Motorola PowerPC 601 instructions as well as normal
4301         PowerPC instructions.
4302
4303 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4304
4305         * i960-dis.c (reg, mem): Just use a static array instead of
4306         calling xmalloc.
4307
4308 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4309
4310         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4311         condition name index if this is for a negated condition.
4312
4313         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4314         Floating point format for 'H' operand is backwards from normal
4315         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
4316         operands (fmpyadd and fmpysub), handle bizarre register
4317         translation correctly for single precision format.
4318
4319         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4320         or 'I' operands if the next format specifier is 'M' (fcmp
4321         condition completer).
4322
4323 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4324
4325         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4326         single number giving a bitmask for the MB and ME fields of an M
4327         form instruction.  Change NB to accept 32, and turn it into 0;
4328         also turn 0 into 32 when disassembling.  Seperated SH from NB.
4329         (insert_mbe, extract_mbe): New functions.
4330         (insert_nb, extract_nb): New functions.
4331         (SC_MASK): Mask out SA and LK bits.
4332         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4333         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
4334         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
4335         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4336         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4337         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
4338         (powerpc_macros): Define table of macro definitions.
4339         (powerpc_num_macros): Define.
4340
4341         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4342         if PPC_OPERAND_NEXT is set.
4343
4344 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4345
4346         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4347         char.  Retrieve contents using bfd_getl32 instead of shifting.
4348
4349 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4350
4351         * ppc-opc.c: New file.  Opcode table for PowerPC, including
4352         opcodes for POWER (RS/6000).
4353         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
4354         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4355         (CFILES): Add ppc-dis.c.
4356         (ppc-dis.o, ppc-opc.o): New targets.
4357         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4358
4359 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4360
4361         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4362         No space before 'u', 'f', or 'N'.
4363
4364 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4365
4366         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4367         farther than we should.
4368
4369         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4370
4371 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
4372
4373         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4374
4375 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
4376
4377         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4378         needs it, to prevent reading past the end of a section.
4379
4380 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4381
4382         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4383         Removed t,A case for la; always use t,A(b) case.
4384
4385 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4386
4387         From Ted Lemen <mellon@pepper.ncd.com>
4388         * mips-dis.c (print_insn_arg): Handle 'k'.
4389         * mips-opc.c: Make cache use k, not t.
4390
4391 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4392
4393         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
4394         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4395         FLOAT_FORMAT_CODE to put out floating point register names.
4396
4397 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4398
4399         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4400
4401 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4402
4403         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4404
4405 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4406
4407         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4408         larger than 32.  Moved dsxx32 variants first for disassembler.
4409
4410 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4411
4412         * z8kgen.c, z8k-opc.h: Add full lda information.
4413
4414 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
4415
4416         * hppa-dis.c (print_insn_hppa): Do not emit a space after
4417         movb instructions.  Any necessary space will be emitted by
4418         the code to handle nullification completers.
4419
4420 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4421
4422         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4423
4424 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4425
4426         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
4427         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
4428
4429 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4430
4431         * mips-opc.c: Correct lwu opcode value (book had it wrong).
4432
4433 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4434
4435         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4436         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4437
4438 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
4439
4440         * m88k-dis.c (m88kdis): comment change.  Remove space after
4441           printing mnemonic.
4442           (printop): handle new arg types DEC and XREG for m88110.
4443
4444 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
4445
4446         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4447         type for absolute branch addresses.  Delete special
4448         "ble" and "be" code in 'W' operand code.
4449
4450 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4451
4452         * mips-opc.c: Set hazard information correctly for branch
4453         likely instructions.
4454
4455 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4456
4457         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
4458         info->fprintf_func for printing and info->print_address_func for
4459         address output.
4460
4461 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4462
4463         * mips-opc.c: Set INSN_TRAP for tXX instructions.
4464
4465 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4466
4467         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4468         Corrected second case of "b" for disassembler.
4469
4470 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4471
4472         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
4473         to BFD swapping routines to correspond to BFD name changes.
4474
4475 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4476
4477         * mips-opc.c: Change div machine instruction to be z,s,t rather
4478         than s,t.  Change div macro to be d,v,t rather than d,s,t.
4479         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
4480         rem and remu which generates only the corresponding div
4481         instruction.  This is for compatibility with the MIPS assembler,
4482         which only generates the simple machine instruction when an
4483         explicit destination of $0 is used.
4484         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4485
4486 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4487
4488         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4489         WR_31 hazard for bal, bgezal, bltzal.
4490
4491 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4492
4493         * hppa-dis.c (print_insn_hppa): Use print function
4494         from within the disassemble_info, not fprintf_filtered.
4495
4496 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4497
4498         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
4499         Law, law@cs.utah.edu.)
4500
4501 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4502
4503         * mips-opc.c ("absu"): Removed.
4504         ("dabs"): Added.
4505
4506 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4507
4508         * mips-opc.c: Added r6000 and r4000 instructions and macros.
4509         Changed hazard information to distinguish between memory load
4510         delays and coprocessor load delays.
4511
4512 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4513
4514         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
4515
4516 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4517
4518         * configure.in: Don't pass cpu to config.bfd.
4519
4520 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4521
4522         * m88k-dis.c (m88kdis): Make class unsigned.
4523
4524 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
4525
4526         * alpha-dis.c (print_insn_alpha): One branch format case was
4527         missing the instruction name.
4528
4529 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4530
4531         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4532         Add the arch-specific auxiliary files.
4533         (OFILES): Remove the arch-specific auxiliary files
4534         and use BFD_MACHINES instead of DIS_LIBS.
4535         * configure.in: Set BFD_MACHINES based on --with-targets option.
4536
4537 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4538
4539         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
4540         for swc1.
4541
4542 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4543
4544         * sparc-opc.c: Change CONST to const to deal with gcc
4545         -Dconst=__const -traditional.
4546
4547 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4548
4549         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4550         coprocessor instructions out of #if 0, and made them use new
4551         argument type "C".
4552
4553 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4554
4555         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4556
4557 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
4558
4559         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4560         instruction, for use by the disassembler.
4561
4562         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
4563         hand-coded sign extensions that depended on 32-bit host ints.
4564         FIXME, we still depend on big-endian host bitfield ordering.
4565         (sparc_print_insn):  Set the insn_info_valid field, and the
4566         other fields that describe the instruction being printed.
4567
4568 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
4569
4570         * sparc-opc.c (call): Accept all 6 addressing modes valid for
4571         `jmp' instead of just one of them.
4572
4573 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4574
4575         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4576         (fput_fp_reg_r): Renamed from fput_reg_r.
4577         (fput_fp_reg): New function.
4578         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4579
4580         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4581
4582         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4583
4584 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4585
4586         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4587
4588         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4589         don't output a space.
4590
4591         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4592
4593 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
4594
4595         * mips-opc.c: New file, containing opcode table from
4596         ../include/opcode/mips.h.
4597         * Makefile.in: Add it.
4598
4599 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4600
4601         * m88k-dis.c: New file, moved in from gdb and changed to use the
4602         new dis-asm.h disassembler interface.
4603         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4604         (m88k-dis.o): New target.
4605
4606 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
4607
4608         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4609         argument string const char * to correspond to opcode/mips.h.
4610
4611 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
4612
4613         * mips-dis.c: Updated to account for name changes in new version
4614         of opcode/mips.h.
4615         * Makefile.in: Added header file dependencies.
4616
4617 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
4618
4619         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4620
4621 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4622
4623         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4624         extend, rather than shifts.
4625
4626 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
4627
4628         * Makefile.in: Undo 15 June change.
4629
4630 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
4631
4632         * m68k-dis.c (print_insn_arg):  Change return value to byte count
4633         or error code.
4634         * m68k-dis.c:  Re-write to detect invalid operands before
4635         printing anything, so we can handle this the same way we
4636         handle invalid opcodes.
4637
4638 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4639
4640         * sh-dis.c, sh-opc.h: Understand some more opcodes.
4641
4642 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
4643
4644         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4645         header files.
4646
4647 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4648
4649         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4650
4651         * configure.in: Do make sysdep.h link.
4652         * Makefile.in: Search ../include.  Don't search ../bfd.
4653
4654 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
4655
4656         Changes from Jeff Law, law@cs.utah.edu:
4657         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
4658         Do not print a space before the completers specified by
4659         'a' and 'd'.
4660
4661 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
4662
4663         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4664         defined, since gdb has been fixed.
4665
4666         Changes from Jeff Law, law@cs.utah.edu:
4667         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4668         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4669         be a *disassemble_info, not a *FILE.
4670         * hppa-dis.c: Support 'd', '!', and 'a'.
4671         * hppa-dis.c: Support 's' to extract a 2 bit space register.
4672         * hppa-dis.c: Delete cases which are no longer needed.
4673
4674 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
4675
4676         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4677
4678 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4679
4680         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4681         H8/300-H opcodes.
4682
4683 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
4684
4685         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4686         * configure.in:  No longer need to configure to get sysdep.h.
4687
4688 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
4689
4690         * Patches from Jeffrey Law <law@cs.utah.edu>.
4691         * hppa-dis.c: Support 'I', 'J', and 'K' in output
4692         templates for 1.1 FP computational instructions.
4693
4694 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4695
4696         * h8500-dis.c (print_insn_h8500): Address argument is type
4697         bfd_vma.
4698         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4699         Ditto.
4700
4701         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4702         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4703
4704         * sparc-dis.c (compare_opcodes): Move static declaration to
4705         top-level.
4706
4707 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4708
4709         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4710         instruction, remove unimp hack from 'l' argument.
4711
4712 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
4713
4714         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
4715         happy.
4716
4717 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
4718
4719         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4720         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4721         instructions.
4722
4723 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4724
4725         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
4726         arrays of string pointers to 2-d arrays of chars, to save
4727         space.
4728
4729 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
4730
4731         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4732         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4733
4734 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4735
4736         * hppa-dis.c: New file from Utah, adapted to new disassembler
4737         calling interface.
4738         * Makefile.in: Include it.
4739
4740 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4741
4742         * sh-dis.c, sh-opc.h: New files.
4743
4744 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4745
4746         * alpha-dis.c, alpha-opc.h: New files.
4747
4748 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4749
4750         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4751         value.
4752
4753 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
4754
4755         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4756
4757 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
4758
4759         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4760         const.
4761
4762 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
4763
4764         * sparc-dis.c: Use fprintf_func a few places where I forgot,
4765         and double percent signs a few places.
4766
4767         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4768
4769         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4770         Use info->print_address_func not print_address.
4771
4772         * dis-buf.c (generic_print_address): New function.
4773
4774 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4775
4776         * Makefile.in: Add sparc-dis.c.
4777         sparc-dis.c: New file, merges binutils and gdb versions as follows:
4778         From GDB:
4779             Add `add' instruction to the set that get checked
4780             for a preceding `sethi' in order to print an absolute address.
4781             * (print_insn):  Disassembly prefers real instructions.
4782             (is_delayed_branch):  Speed up.
4783             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
4784             Still missing some float ops, and needs testing.
4785             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4786             F_ALIAS.  Use printf, not fprintf, when not passing a file
4787             pointer...
4788             (compare_opcodes): Check that identical instructions have
4789             identical opcodes, complain otherwise.
4790         From binutils:
4791             * New 'm' arg.
4792             * Include reg_names.
4793         From neither:
4794             Use dis-asm.h/read_memory_func interface.
4795
4796 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
4797
4798         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4799           deliberately return non-zero to setjmp from longjmp.  Otherwise
4800           this code fails to compile.
4801
4802 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
4803
4804         * m68k-dis.c:  Fix prototype for fetch_arg().
4805
4806 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4807
4808         * dis-buf.c: New file, for new read_memory_func interface.
4809         Makefile.in (OFILES): Include it.
4810         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4811         Use new read_memory_func interface.
4812
4813 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4814
4815         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4816         * h8500-opc.h: Fix couple of opcodes.
4817
4818 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
4819
4820         * Makefile.in: add dvi & installcheck targets
4821
4822 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
4823
4824         * Makefile.in:  Update for h8500-dis.c.
4825
4826 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4827
4828         * h8500-dis.c, h8500-opc.h: New files
4829
4830 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
4831
4832         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
4833         ../include/dis-asm.h.
4834         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
4835         and ../gdb/m68k-pinsn.c).
4836         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
4837         and ../gdb/i386-pinsn.c).
4838         * m68881-ext.c:  New file.  Moved definition of
4839         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4840         * Makefile.in:  Adjust for new files.
4841         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
4842         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
4843         can be dis-assembled.
4844
4845 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4846
4847         * mips-dis.c (print_insn_arg): Now returns void.
4848
4849 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
4850
4851         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
4852         files that use the macros.
4853
4854 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4855
4856         * mips-dis.c: New file, from gdb/mips-pinsn.c.
4857         * Makefile.in (DIS_LIBS): Added mips-dis.o.
4858         (CFILES): Added mips-dis.c.
4859
4860 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
4861
4862         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4863         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4864
4865 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
4866
4867         * Makefile.in:  Improve *clean rules.
4868         * configure.in:  Allow a default host.
4869
4870 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
4871
4872         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4873         files include other sysdep files
4874
4875 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4876
4877         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4878
4879 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
4880
4881         * configure.in:  For host support, use ../bfd/configure.host
4882         so it stays in sync with the ../bfd/hosts database.
4883
4884 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
4885
4886         * configure.in: use cpu-vendor-os triple instead of nested cases
4887
4888 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
4889
4890         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4891         *always* the wrong one.
4892
4893 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4894
4895         * z8kgen.c: added copyright info
4896
4897 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4898
4899         * z8k-dis.c (unparse_instr): prettier tabs
4900         * z8kgen.c -> z8k-opc.h: bug fixes in tables
4901
4902 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
4903
4904         * configure.in:  Add ncr* configuration.
4905         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
4906         picayune ANSI compilers happy.
4907
4908 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
4909
4910         * configure.in (i386):  Make i386 and i486 synonymous for now.
4911         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
4912
4913 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4914
4915         * Makefile.in (install): Fix typo.
4916
4917 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
4918
4919         * Makefile.in (make):  Remove obsolete crud.
4920         (sparc-opc.o):  Avoid Sun Make VPATH bug.
4921
4922 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
4923
4924         * Makefile.in: since there are no SUBDIRS, remove rule and
4925         references of subdir_do.
4926
4927 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4928
4929         * Makefile.in (install): Get the library name right here too.
4930         Don't install bfd.h, since it's unrelated to this library.  No
4931         subdirs to recurse into, either.
4932         (CFILES): The source file has a .c suffix, not .o.
4933
4934         * sparc-opc.c: New file, moved from BFD.
4935         * Makefile.in (OFILES): Build it.
4936
4937 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
4938
4939         * z8k-dis.c: fixed forward refferences of some declarations.
4940
4941 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
4942
4943         * Makefile.in: get the name of the library right
4944
4945 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
4946
4947         * z8k-dis.c: knows how to disassemble z8k stuff
4948         * z8k-opc.h: new file full of z8000 opcodes
4949
4950 \f
4951 Local Variables:
4952 version-control: never
4953 End: