2 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-opc.c: Add notes about needing special insert/extract
5 for all the load/store insns, except "ld.b" and "st.b".
7 * v850-opc.c (insert_d22, extract_d22): New functions.
8 (v850_operands): Use insert_d22 and extract_d22 for
10 (insert_d9): Fix range check.
12 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
14 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
15 and set bits field to D9 and D22 operands.
17 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
19 * v850-opc.c (v850_operands): Define SR2 operand.
20 (v850_opcodes): "ldsr" uses R1,SR2.
22 * v850-opc.c (v850_opcodes): Fix opcode specs for
23 sld.w, sst.b, sst.h, sst.w, and nop.
25 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
27 * v850-opc.c (v850_opcodes): Add null opcode to mark the
28 end of the opcode table.
32 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
34 * d10v-opc.c (pre_defined_registers): Added register pairs,
35 "r0-r1", "r2-r3", etc.
39 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
41 * v850-opc.c (v850_operands): Make I16 be a signed operand.
42 Create I16U for an unsigned 16bit mmediate operand.
43 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
45 * v850-opc.c (v850_operands): Define EP operand.
46 (IF4A, IF4B, IF4C, IF4D): Use EP.
48 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
49 with immediate operand, "movhi". Tweak "ldsr".
51 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
52 correct. Get sld.[bhw] and sst.[bhw] closer.
54 * v850-opc.c (v850_operands): "not" is a two byte insn
56 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
58 * v850-opc.c (v850_operands): D16 inserts at offset 16!
60 * v850-opc.c (two): Get order of words correct.
62 * v850-opc.c (v850_operands): I16 inserts at offset 16!
64 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
65 register source and destination operands.
66 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
68 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
69 same thinko in "trap" opcode.
71 * v850-opc.c (v850_opcodes): Add initializer for size field
74 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
75 Add D8 for 8-bit unsigned field in short load/store insns.
76 (IF4A, IF4D): These both need two registers.
77 (IF4C, IF4D): Define. Use 8-bit unsigned field.
78 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
79 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
80 for "ldsr" and "stsr".
81 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
84 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
85 short store word (sst.w).
87 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
89 * v850-opc.c (v850_operands): Added insert and extract fields,
90 pointers to functions that handle unusual operand encodings.
92 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
94 * v850-opc.c (v850_opcodes): Enable "trap".
96 * v850-opc.c (v850_opcodes): Fix order of displacement
97 and register for "set1", "clr1", "not1", and "tst1".
99 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
101 * v850-opc.c (v850_operands): Add "B3" support.
102 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
105 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
107 * v850-opc.c: Close unterminated comment.
109 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
111 * v850-opc.c (v850_operands): Add flags field.
112 (v850_opcodes): add move opcodes.
114 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
116 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
117 * configure: (bfd_v850v_arch) Add new case.
118 * configure.in: (bfd_v850_arch) Add new case.
119 * v850-opc.c: New file.
122 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
124 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
127 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
129 * d10v-opc.c: Add additional information to the opcode
130 table to help determinine which instructions can be done
134 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
136 * mpw-make.sed: Update editing of include pathnames to be
139 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
141 * arm-opc.h: Added "bx" instruction definition.
143 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
145 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
148 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
150 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
152 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
154 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
157 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
159 * makefile.vms: Update for alpha-opc changes.
161 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
163 * i386-dis.c (print_insn_i386): Actually return the correct value.
164 (ONE, OP_ONE): #ifdef out; not used.
167 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
169 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
170 Changed subi operand type to treat 0 as 16.
173 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
175 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
178 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
180 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
181 memory transfer instructions. Add new format string entries %h and %s.
182 * arm-dis.c: (print_insn_arm): Provide decoding of the new
186 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
188 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
189 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
192 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
194 * alpha-dis.c (print_insn_alpha_osf): Remove.
195 (print_insn_alpha_vms): Remove.
196 (print_insn_alpha): Make globally visible. Chose the register
197 names based on info->flavour.
198 * disassemble.c: Always return print_insn_alpha for the alpha.
201 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
203 * d10v-dis.c (dis_long): Handle unknown opcodes.
205 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
207 * d10v-opc.c: Changes to support signed and unsigned numbers.
208 All instructions with the same name that have long and short forms
209 now end in ".l" or ".s". Divs added.
210 * d10v-dis.c: Changes to support signed and unsigned numbers.
212 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
214 * d10v-dis.c: Change all functions to use info->print_address_func.
217 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
219 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
220 move ccr/sr insns more strict so that the disassembler only
221 selects them when the addressing mode is data register.
224 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
225 * d10v-opc.c (pre_defined_registers): Declare.
226 * d10v-dis.c (print_operand): Now uses pre_defined_registers
227 to pick a better name for the registers.
230 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
232 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
233 operands for fexpand and fpmerge. From Christian Kuehnke
234 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
236 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
238 * alpha-dis.c (print_insn_alpha): No longer the user-visible
239 print routine. Take new regnames and cpumask arguments.
240 Kill the environment variable nonsense.
241 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
242 (print_insn_alpha_vms): New function. Do VMS style regnames.
243 * disassemble.c (disassembler): Test bfd flavour to pick
244 between OSF and VMS routines. Default to OSF.
246 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
248 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
249 * configure: Rebuild.
250 * Makefile.in (install): Use @INSTALL_SHLIB@.
253 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
255 * configure: (bfd_d10v_arch) Add new case.
256 * configure.in: (bfd_d10v_arch) Add new case.
257 * d10v-dis.c: New file.
258 * d10v-opc.c: New file.
259 * disassemble.c (disassembler) Add entry for d10v.
262 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
264 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
265 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
267 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
269 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
270 distinguish between variants of the instruction set.
271 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
272 distinguish between variants of the instruction set.
274 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
276 * i386-dis.c (print_insn_i8086): New routine to disassemble using
277 the 8086 instruction set.
278 * i386-dis.c: General cleanups. Make most things static. Add
279 prototypes. Get rid of static variables aflags and dflags. Pass
280 them as args (to almost everything).
282 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
284 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
286 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
288 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
289 if the next arg is marked with SRC_IN_DST. Gross.
291 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
292 we're looking for and find EXR.
294 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
295 if we're looking for KBIT and we don't find it.
297 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
300 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
301 3bit immediate operands.
303 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
305 * Released binutils 2.7.
307 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
308 <kkaempf@progis.ac-net.de>.
310 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
312 * alpha-opc.c: Correct second case of "mov" to use OPRL.
314 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
316 * sparc-dis.c (print_insn_sparclite): New routine to print
317 sparclite instructions.
319 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
321 * m68k-opc.c (m68k_opcodes): Add coldfire support.
323 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
325 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
326 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
327 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
329 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
331 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
332 Use autoconf-set values.
333 (docdir, oldincludedir): Removed.
334 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
336 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
338 * alpha-opc.c: New file.
339 * alpha-opc.h: Remove.
340 * alpha-dis.c: Complete rewrite to use new opcode table.
341 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
342 * configure: Rebuild with autoconf 2.10.
343 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
344 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
346 (alpha-opc.o): New target.
348 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
350 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
351 Set imm_added_to_rs1 even if the source and destination register
354 * sparc-opc.c: Add some two operand forms of the wr instruction.
356 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
358 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
361 * disassemble.c (disassembler): Handle H8/S.
362 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
364 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
366 * sparc-opc.c: Add beq/teq as aliases for be/te.
368 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
369 <sergei@msil.sps.mot.com>.
371 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
373 * makefile.vms: New file.
375 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
377 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
379 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
382 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
384 * i386-dis.c (OP_OFF): Call append_prefix.
386 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
388 * ppc-opc.c (instruction encoding macros): Add explicit casts to
389 unsigned long to silence a warning from the Solaris PowerPC
392 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
394 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
396 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
398 * sparc-dis.c (X_IMM,X_SIMM): New macros.
400 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
401 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
402 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
403 cpush, cpusha, cpull sparclet insns.
405 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
407 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
409 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
411 * sparc-opc.c: Set F_FBR on floating point branch instructions.
412 Set F_FLOAT on other floating point instructions.
414 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
416 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
418 (powerpc_opcodes): Add 860/821 specific SPRs.
420 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
422 * configure.in: Permit --enable-shared to specify a list of
423 directories. Set and substitute BFD_PICLIST.
424 * configure: Rebuild.
425 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
426 uses. Set to @BFD_PICLIST@.
428 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
430 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
431 not "abs", which may be needed for the absolute in something
432 like btst #0,@10:8. Print L_3 immediates separately from other
433 immediates. Change ABSMOV reference to ABS8MEM.
435 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
437 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
438 (current_arch_mask): New static global.
439 (compute_arch_mask): New static function.
440 (print_insn_sparc): Delete sparc_v9_p. New static local
441 current_mach. Resort opcode table if current_mach changes.
442 Generalize "insn not supported" test.
443 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
444 Delete test for v9/!v9.
445 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
447 (brfc): Split into CBR and FBR for coprocessor/fp branches.
448 (brfcx): Renamed to FBRX.
449 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
450 coprocessor mnemonics are not supported on the sparclet).
451 (condf): Renamed to CONDF.
452 (SLCBCC2): Delete F_ALIAS flag.
454 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
456 * sparc-opc.c (sparc_opcodes): rd must be 0 for
457 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
459 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
461 * Makefile.in (config.status): Depend upon BFD VERSION file, so
462 that the shared library version number is set correctly.
464 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
466 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
467 Miles Bader <miles@gnu.ai.mit.edu>.
468 * configure: Rebuild.
470 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
472 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
475 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
477 * configure: Rebuild with autoconf 2.8.
479 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
481 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
482 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
484 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
486 * configure.in: Don't set SHLIB or SHLINK to an empty string,
487 since they appear as targets in Makefile.in.
488 * configure: Rebuild.
490 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
492 * mpw-make.sed: Edit out shared library support bits.
494 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
496 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
497 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
498 (sparc_opcodes): Add sparclet insns.
499 (sparclet_cpreg_table): New static local.
500 (sparc_{encode,decode}_sparclet_cpreg): New functions.
501 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
503 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
505 * i386-dis.c (index16): New static variable.
506 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
508 (OP_indirE): Return result of OP_E.
509 (OP_E): Check for 16 bit addressing mode, and disassemble
510 correctly. Optimised 32 bit case a little. Don't print
511 "(base,index,scale)" when sib specifies only an offset.
513 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
515 * configure.in: Set and substitute SHLIB_DEP.
516 * configure: Rebuild.
517 * Makefile.in (SHLIB_DEP): New variable.
518 (LIBIBERTY_LISTS, BFD_LIST): New variables.
519 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
520 COMMON_SHLIB, add them to piclist with appropriate modifications.
521 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
522 here: just use piclist.
524 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
526 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
527 (print_insn_sparc): Rewrite v9/not-v9 tests.
528 (compare_opcodes): Likewise.
529 * sparc-opc.c (MASK_<ARCH>): Define.
530 (v6,v7,v8,sparclite,v9,v9a): Redefine.
531 (sparclet,v6notv9): Define.
532 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
533 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
535 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
537 * configure.in: Call AC_PROG_CC before configure.host.
538 * configure: Rebuild.
540 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
542 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
544 * i386-dis.c (onebyte_has_modrm): New static array.
545 (twobyte_has_modrm): New static array.
546 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
548 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
550 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
553 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
555 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
558 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
560 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
561 m68010up, not just m68020up | cpu32.
563 * Makefile.in (SONAME): New variable.
564 ($(SHLINK)): Make a link to the transformed name, as well.
565 (stamp-tshlink): New target.
566 (install): Skip stamp-tshlink during install.
568 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
570 * configure.in: Call AC_ARG_PROGRAM.
571 * configure: Rebuild.
572 * Makefile.in (program_transform_name): New variable.
573 (install): Transform library name before installing it.
575 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
577 * i960-dis.c (mem): Add HX dcinva instruction.
579 Support for building as a shared library, based on patches from
580 Alan Modra <alan@spri.levels.unisa.edu.au>:
581 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
582 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
583 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
584 * configure: Rebuild.
585 * Makefile.in (ALLLIBS): New variable.
586 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
587 (COMMON_SHLIB, SHLINK): New variables.
588 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
589 (STAGESTUFF): Remove variable.
590 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
591 (stamp-piclist, piclist): New targets.
592 ($(SHLIB), $(SHLINK)): New targets.
593 ($(OFILES)): Depend upon stamp-picdir.
594 (disassemble.o): Build twice if PICFLAG is set.
595 (MOSTLYCLEAN): Add pic/*.o.
596 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
597 (distclean): Remove pic and stamp-picdir.
598 (install): Install shared libraries.
599 (stamp-picdir): New target.
601 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
603 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
604 Print unknown instruction as "unknown", rather than in hex.
606 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
608 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
610 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
612 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
614 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
616 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
617 when necessary. From Ulrich Drepper
618 <drepper@myware.rz.uni-karlsruhe.de>.
620 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
622 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
623 sparc_num_opcodes. Update architecture enum values.
624 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
625 (sparc_opcode_lookup_arch): New function.
626 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
627 (sparc_opcodes): Add v9a shutdown insn.
629 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
631 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
632 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
634 (print_insn_sparc64): Deleted.
635 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
638 * sparc-opc.c (architecture_pname): Add v9a.
640 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
642 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
643 incorrectly defined as 0x16 when it should be 0x15.
644 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
645 (alpha_insn_set): added cvtst and cvttq float ops. Also added
646 excb (exception barrier) which is defined in the Alpha
647 Architecture Handbook version 2.
648 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
649 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
650 disassembled as or, for example.
652 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
654 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
655 (_print_insn_mips): Change i from int to unsigned int.
657 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
659 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
660 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
662 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
664 * i386-dis.c: Added Pentium Pro instructions.
666 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
668 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
671 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
673 * sh-opc.h (sh_nibble_type): Added REG_B.
674 (sh_arg_type): Added A_REG_B.
675 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
677 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
679 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
681 * disassemble.c (disassembler): Use new bfd_big_endian macro.
683 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
685 * Makefile.in (distclean): Remove stamp-h. From Ronald
686 F. Guilmette <rfg@monkeys.com>.
688 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
690 From David Mosberger-Tang <davidm@azstarnet.com>:
691 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
694 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
696 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
697 (sh_table): Added many SH3 opcodes.
698 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
700 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
702 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
703 (subco,subco.): Mark this PPC, not PPCCOM.
705 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
707 * configure: Rebuild with autoconf 2.7.
709 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
711 * configure: Rebuild with autoconf 2.6.
713 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
715 * configure.in: Sort list of architectures. Accept but do nothing
716 for alliant, convex, pyramid, romp, and tahoe.
718 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
720 * a29k-dis.c (print_special): Change num to unsigned int.
722 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
724 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
727 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
729 * configure.in: Call AC_CHECK_PROG to find and cache AR.
730 * configure: Rebuilt.
732 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
734 * configure.in: Add case for bfd_i860_arch.
735 * configure: Rebuild.
737 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
739 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
740 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
741 (NEXTDOUBLE): Likewise.
742 (print_insn_m68k): Don't match fmoveml if there is more than one
743 register in the list.
744 (print_insn_arg): Handle a place of '8' for a type of 'L'.
746 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
748 * m68k-opc.c: Use #W rather than #w.
749 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
751 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
753 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
754 and likewise for all the dbxx opcodes.
756 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
758 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
760 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
762 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
763 the VR4100 specific instructions to the mips_opcodes structure.
765 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
767 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
768 ugly Metrowerks bug in CW6, is fixed in CW7.
770 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
772 * ppc-opc.c (whole file): Add flags for common/any support.
774 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
776 * Makefile.in (BISON): Remove macro.
777 (FLAGS_TO_PASS): Remove BISON.
779 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
781 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
783 * m68k-dis.c (print_insn_m68k): Recognize all two-word
784 instructions that take no args by looking at the match mask.
785 (print_insn_arg): Always print "%" before register names.
786 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
787 [case '_']: Don't print "@#" before address.
788 [case 'J']: Use "%s" as format string, not register name.
789 [case 'B']: Treat place == 'C' like 'l' and 'L'.
791 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
793 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
796 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
798 From David Mosberger-Tang <davidm@azstarnet.com>
800 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
801 (alpha_insn_set): added definitions for VAX floating point
802 instructions (Unix compilers don't generate these, but handcoded
803 assembly might still use them).
805 * alpha-dis.c (print_insn_alpha): added support for disassembling
806 the miscellaneous instructions in the Alpha instruction set.
808 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
810 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
811 no longer create sysdep.h, sed ppc-opc.c to work around a
812 serious Metrowerks C bug.
813 * mpw-make.in: Remove.
814 * mpw-make.sed: New file, used by mpw-configure to edit
815 Makefile.in into an MPW makefile.
817 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
819 * Makefile.in (maintainer-clean): New synonym for realclean.
821 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
823 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
824 which use '0', '1', and '2' instead. Specify the proper size for
825 a pmove immediate operand. Correct the pmovefd patterns to be
826 moves to a register, not from a register.
827 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
829 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
831 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
832 %psr, %wim, %tbr as F_NOTV9.
834 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
836 * Makefile.in (Makefile): Just rebuild Makefile when running
838 (config.h, stamp-h): New targets.
839 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
840 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
842 * configure: Rebuild.
844 * mips-opc.c: Change unaligned loads and stores with "t,A"
845 operands to use "t,A(b)".
847 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
849 * sh-dis.c (print_insn_shx): Add F_FR0 support.
851 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
853 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
854 until 3 instead of until 2.
856 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
858 * Makefile.in (ALL_CFLAGS): Define.
859 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
860 (MOSTLYCLEAN): Add config.log.
861 (distclean): Don't remove config.log.
862 * configure.in: Substitute HDEFINES.
863 * configure: Rebuild.
865 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
867 * sh-opc.h (sh_arg_type): Add F_FR0.
868 (sh_table, case fmac): Add F_FR0 as first argument.
870 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
872 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
874 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
876 * sparc-dis.c: Remove all references to NO_V9.
878 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
880 * aclocal.m4: Just include ../bfd/aclocal.m4.
881 * configure: Rebuild.
883 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
885 * sparc-dis.c (X_DISP19): Define.
886 (print_insn, case 'G'): Use it.
887 (print_insn, case 'L'): Sign extend displacement.
889 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
891 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
892 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
893 host_makefile_frag or frags.
894 * aclocal.m4: New file.
895 * configure: Rebuild.
896 * Makefile.in (INSTALL): Set to @INSTALL@.
897 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
898 (INSTALL_DATA): Set to @INSTALL_DATA@.
900 (AR_FLAGS): Set to rc rather than qc.
901 (CC): Define as @CC@.
902 (CFLAGS): Set to @CFLAGS@.
903 (@host_makefile_frag@): Remove.
904 (config.status): Remove dependency upon @frags@.
906 * configure.in: ../bfd/config.bfd now just sets shell variables.
907 Use them rather than looking through target Makefile fragments.
908 * configure: Rebuild.
910 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
912 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
914 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
916 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
917 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
920 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
921 (lookup_{name,value}): New functions.
922 (prefetch_table): New static local.
923 (sparc_{encode,decode}_prefetch): New functions.
924 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
926 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
928 * sh-opc.h: Add blank lines to improve readabililty of sh3e
931 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
933 * sh-dis.c: Correct comment on first line of file.
935 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
937 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
939 * sparc-opc.c (asi, membar): New static locals.
940 (sparc_{encode,decode}_{asi,membar}): New functions.
941 (sparc_opcodes, membar insn): Fix.
942 * sparc-dis.c (print_insn): Call sparc_decode_asi.
943 Support decoding of membar masks.
946 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
948 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
950 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
952 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
953 and likewise for the other branches. Add bhs as an alias for bcc,
954 and likewise for the size variants. Add dbhs as an alias for
957 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
959 * sh-opc.h (FP sts instructions): Update to match reality.
961 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
963 * m68k-dis.c: (fpcr_names): Add % before all register names.
964 (reg_names): Likewise.
965 (print_insn_arg): Don't explicitly print % before register names.
966 Add % before register names in static array names. In case 'r',
967 print data registers as `@(Dn)', not `Dn@'. When printing a
968 memory address, don't print @# before it.
969 (print_indexed): Change base_disp and outer_disp from int to
970 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
971 syntax. Sign extend 8 byte displacement correctly.
972 (print_base): Print using MIT syntax. Print zpc when appropriate.
973 Change parameter disp from int to bfd_vma.
975 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
978 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
980 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
981 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
982 * sh-opc.h (sh_arg_type): Add new operand types.
983 (sh_table): Add new opcodes from SH3E Floating Point ISA.
985 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
987 * Makefile.in (distclean): Remove generated file config.h.
989 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
991 * Makefile.in (distclean): Remove generated file config.h.
993 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
995 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
997 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
999 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1000 rather than numopcodes. Use m68k_opcodes rather than removed
1001 opcode function. Don't check F_ALIAS.
1002 (print_insn_arg): Change first parameter to be const char *.
1003 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1004 (m68k-opc.o): New target.
1005 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1006 * configure: Rebuild.
1008 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1010 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1011 (opcode_bits, opcode_hash_table): New variables.
1012 (opcodes_initialized): Renamed from opcodes_sorted.
1013 (build_hash_table): New function.
1014 (is_delayed_branch): Use hash table.
1015 (print_insn): Renamed from print_insn_sparc, made static.
1016 Build and use hash table. If !sparc64, ignore sparc64 insns,
1017 and vice-versa if sparc64.
1018 (print_insn_sparc, print_insn_sparc64): New functions.
1019 (compare_opcodes): Move sparc64 opcodes to end.
1020 Print commutative insns with constant second.
1021 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1023 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1025 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1026 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1027 avoids printing a delay slot in a delay slot.
1028 * sh-opc.h (sh_table): Fully bracket last entry.
1030 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1032 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1034 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1036 * configure.in: Get host_makefile_frag from ${srcdir}.
1038 * configure.in: Autoconfiscated. Check for string[s].h. Create
1039 config.h from config.in. Don't set up sysdep.h link.
1040 * sysdep.h: New file.
1041 * configure, config.in: New files, generated from configure.in.
1042 * Makefile.in: Updated to be processed autoconf-style.
1043 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1044 (Makefile): Depend on config.status.
1045 (config.status): New rule.
1046 * configure.bat: Update Makefile substitutions.
1048 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1050 * mips-opc.c (L1): Define.
1051 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1052 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1055 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1057 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1058 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1059 have multiple add units but only a single logical unit.
1061 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1062 shifted by 18, without any insertion or extraction function.
1063 (insert_cr, extract_cr): Remove.
1066 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1068 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1071 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1073 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1076 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1078 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1079 * sh-opc.h: Add copyright.
1081 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1083 * Makefile.in (crunch-m68k): Delete extra target accidentally
1084 checked in a while ago.
1086 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1088 * sh-opc.h (sh_table): Add SH3 support.
1090 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1092 * sh-opc.h: Added bsrf and braf.
1094 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1096 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1097 bogus [ls]fm{ea,fd} patterns.
1099 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1100 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1101 initialize it from memory. Make function static.
1102 (print_insn_{big,little}_arm): New functions.
1103 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1104 the correct endianness.
1107 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1109 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1110 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1113 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1115 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1118 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1120 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1121 17th, so that it builds again using GCC as the compiler.
1123 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1125 * mips-dis.c (print_insn_little_mips): Cast return value from
1126 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1127 expects an unsigned long, and that might be fewer words of
1128 argument storage (e.g., if bfd_vma is long long on a 32-bit
1130 (print_insn_big_mips): Likewise with bfd_getb32 value.
1131 (_print_insn_mips): Now static.
1133 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1135 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1136 gcc memory hog problem with initializer is fixed.
1139 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1141 * arc-opc.c (NULL): Define.
1142 (arc_operands, insn fields u,s): Delete.
1143 (arc_operands, insn fields a,b,c): Mark as signed.
1144 (arc_opcodes): No longer const, links computed at run-time.
1145 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1146 suffixes that affect the insn code.
1147 (arc_opcodes): Resort table to macros are first.
1148 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1149 (arc_opcodes, st [b] entry): Likewise.
1150 (arc_opcodes, st [b,d] entry): Fix mask, value.
1151 (arc_reg_names): Add entries for r29, r30, r31, r60.
1152 (opcode_map, icode_map): New static globals.
1153 (arc_opcode_init_tables): Initialize them.
1154 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1155 (insert_shimmoffset): Signal error if register present.
1157 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1160 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1162 Merge in support for Mac MPW as a host.
1163 (Old change descriptions retained for informational value.)
1165 * mpw-config.in (archname): Compute from the config.
1166 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1168 * mpw-config.in (target_arch): Compute from canonical target.
1169 (m68k, mips, powerpc, sparc): Add architectures.
1170 * mpw-make.in (disassemble.c.o): Add.
1171 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1173 * mpw-config.in (BFD_MACHINES): Set to a default value.
1174 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1176 * mpw-make.in (CSEARCH): Add extra-include to search path.
1178 * mpw-config.in (varargs.h): Don't create.
1179 (sysdep.h): Create using forward-include.
1180 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1182 * mpw-config.in: New file, MPW version of configure.in.
1183 * mpw-make.in: New file, MPW version of Makefile.in.
1186 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1188 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1189 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1190 (print_insn_*): Pass bfd mach number, not opcode version.
1191 * arc-opc.c (arc_get_opcode_mach): New function.
1194 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1196 * alpha-dis.c (print_insn_alpha): Put empty statement after
1199 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1201 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1202 (low_sign_extend): Likewise.
1203 (get_field): Delete unused function.
1204 (set_field, deposit_14, deposit_21): Likewise.
1206 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1208 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1211 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1213 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1215 * alpha-opc.h (OSF_ASMCODE): define
1216 print pal-code names as defined in App C of the
1217 Alpha Architecture Reference Manual
1219 * alpha-dis.c: cleaned up output
1220 print stylized code forms as defined in App A.4.3 of the
1221 Alpha Architecture Reference Manual
1223 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1225 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1227 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1230 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1232 * m68k-dis.c (opcode): New function. Returns address of opcode
1233 table entry given index, even if the opcode table was split to
1234 work around gcc bugs.
1235 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1237 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1238 (reg_names): Now const.
1239 (print_insn_arg): Arrays cacheFieldName and names now const.
1240 (print_indexed): Array scales now const.
1243 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1245 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1246 (print_insn_arc_{host,graphics,audio}): Likewise.
1247 (print_insn): Add prototype.
1248 (arc_get_disassembler): New arg `big_p'. Return little or big
1249 print fn accordingly.
1250 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1251 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1252 (arc_opval_supported): Likewise.
1253 * disassemble.c (disassembler): Pass big endian flag to
1254 arc_get_disassembler.
1257 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1259 * ppc-opc.c: Sort recently added instructions by minor opcode
1260 number within major opcode number.
1262 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1264 * hppa-dis.c: Include libhppa.h.
1266 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1268 * mips-opc.c: Change dli to use M_DLI, and add dla.
1270 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1272 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1275 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1277 * arc-dis.c (arc_get_disassembler): Change argument to int,
1278 one of bfd_mach_arc_xxx. All callers updated.
1281 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1283 * mips-opc.c: Add r4650 mul instruction.
1285 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1287 * mips-opc.c: Add uld and usd macros for unaligned double load and
1290 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1292 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1293 mfdcr, mtdcr, icbt, iccci.
1296 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1298 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1299 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1300 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1301 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1302 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1303 (insert_absaddr): New function.
1305 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1307 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1308 New argument `cpu', pass it to arc_opcode_init_tables.
1309 Document byte order dependencies. Ignore unsupported insns.
1310 (arc_get_disassembler): New function.
1311 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1312 print_insn_arc_audio): New functions.
1313 * arc-opc.c (MULTSHIFT operand): Delete.
1314 (UNSIGNED, SATURATION): New operands.
1315 (mac, mul, mul64, mulu64): New insns.
1316 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1317 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1318 (host,graphics,audio extended and auxiliary regs): Define.
1319 (ss, sc, mh, ml): New suffixes.
1320 (arc_opcode_supported, arc_opval_supported): New functions.
1321 (insert_multshift, extract_multshift): Deleted.
1322 * disassemble.c (disassembler, case bfd_arch_arc): Call
1323 arc_get_disassembler to get disassembler routine.
1326 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1328 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1329 signed char fields to shorts, more portable.
1331 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1333 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1334 char fields as signed chars, since they may have negative values.
1336 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1338 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1339 (mycroft@netbsd.org).
1341 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1343 From "Logg, Ed" <elogg@ea.com>:
1344 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1345 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1348 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1350 * ppc-opc.c: Changes based on patch from David Edelsohn
1351 <edelsohn@mhpcc.edu>.
1352 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1355 (insert_tbr): New static function.
1356 (extract_tbr): New static function.
1357 (XFXFXM_MASK, XFXM): Define.
1358 (XSPRBAT_MASK, XSPRG_MASK): Define.
1359 (powerpc_opcodes): Add instructions to access special registers by
1360 name. Add mtcr and mftbu.
1362 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1364 * mips-opc.c (P3): Define.
1365 (mips_opcodes): Add mad and madu.
1367 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1369 * configure.in: Add W65 support.
1370 * disassemble.c: Likewise.
1371 * w65-opc.h, w65-dis.c: New files.
1373 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1375 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1379 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1381 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1383 * arc-opc.c (extract_reladdr): New function.
1384 (insert_reladdr): Store address right-shifted by 2.
1387 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1389 * mips-opc.c: Add dli as a synonym for li.
1392 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1394 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1396 (extraction fns): Insn argument now array of two words. Return pointer
1397 to value's table entry. All uses changed.
1398 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1399 (insert_multshift, extract_multshift): New fns.
1400 (arc_operands): Add support for cache bypass suffix. Add support for
1401 predefined aux regs. Modifier bits moved to flags field.
1402 (arc_opcodes): Likewise.
1403 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1404 New insn rlc. Update to syntax in programmer's manual.
1405 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1406 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1408 (arc_opcode_init_tables): New argument to indicate cpu type.
1409 (insert_reg): Handle predefined aux regs.
1410 (extract_reg): Likewise.
1411 (lookup_register): New fn.
1412 * arc-dis.c (arc_condition_codes): Deleted.
1413 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1414 Clean up modifier handling. Handle predefined aux regs.
1417 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1419 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1420 print something for reserved opcode values, even if it won't
1423 * mips-dis.c (_print_insn_mips): When initializing, shift right
1424 and mask, to avoid sign extension problems on the Alpha.
1426 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1430 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1432 * configure.in: Add ARC support.
1433 * disassemble.c: Likewise.
1434 * arc-dis.c, arc-opc.c: New files.
1437 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1439 * sh-opc.h (mov.l gbr): Get direction right.
1440 * sh-dis.c (print_insn_shx): New function.
1441 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1442 print opcodes with right byte order.
1444 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1446 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1447 to avoid conflicts with getopt.
1449 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1451 * hppa-dis.c (print_insn_hppa): Read the instruction using
1452 bfd_getb32, so that it works on a little endian or 64 bit host.
1453 Remove unused local variable op.
1455 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1457 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1458 addu does not work correctly if -mips3.
1460 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1462 * a29k-dis.c (print_special): Add special register names defined
1463 on 29030, 29040 and 29050.
1464 (print_insn): Handle new operand type 'I'.
1466 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1468 * Makefile.in (INSTALL): Use top level install.sh script.
1470 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1472 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1473 that it works on a little endian host.
1475 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1477 * configure.in: Use ${config_shell} when running config.bfd.
1479 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1481 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1483 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1485 * a29k-dis.c (print_insn): Print the opcode.
1487 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1489 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1491 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1493 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1495 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1497 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1498 which store a value into memory.
1500 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1502 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1503 * arm-dis.c, arm-opc.h: New files.
1505 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1507 * Makefile.in (ns32k-dis.o): Add dependency.
1508 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1509 string, not as array of chars.
1511 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1513 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1515 * sparc-opc.c: Added sparclite extended FP operations, and
1516 versions of v9 impdep* instructions permitting specification of
1519 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1521 * i960-dis.c (reg_names): Now const.
1522 (struct sparse_tabent): New type, copied from array type in mem
1524 (ctrl): Local static array ctrl_tab now const.
1525 (cobr): Local static array cobr_tab now const.
1526 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1527 static variable mem_tab no longer explicitly initialized. Changed
1528 mem_init to const array of struct sparse_tabent.
1529 (reg): Local static variable reg_tab no longer explicitly
1530 initialized. Changed reg_init to const array of struct
1532 (ea): Local static array scale_tab now const.
1534 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1537 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1539 * configure.bat: the disassember needs to be enabled for
1540 "objdump -d" to work in djgpp.
1542 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1544 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1545 (invalid_float): Enabled general version, doesn't require running
1546 on ns32k host. Changed to take char* argument, and test for
1547 explicitly specified sizes, instead of using sizeof() on host CPU
1549 (INVALID_FLOAT): Cast first argument.
1550 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1551 list_P032, list_M032): Now const.
1552 (optlist, list_search): Made appropriate arguments now point to
1554 (print_insn_arg): Changed static array of one-character-string
1555 pointers into a static const array of characters; fixed sprintf
1556 statement accordingly.
1558 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1560 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1561 from distribution. A ns32k-dis.c from a previous distribution has
1562 been brought up to date and supports the new interface.
1564 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1566 * configure.in: add bfd_ns32k_arch target support.
1568 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1569 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1571 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1573 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1576 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1578 * h8300-dis.c, mips-dis.c: Don't use true and false.
1580 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1582 * configure.in: Change --with-targets to --enable-targets.
1584 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1586 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1587 opcodes to the first instruction with that opcode, to speed
1588 disassembly of large files. From ralphc@pyramid.com (Ralph
1591 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1593 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1595 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1597 * configure.bat: update to latest makefile.in
1599 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1601 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1602 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1603 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1604 slot insn is in a delay slot.
1605 * z8k-opc.h: (resflg): Fix patterns.
1606 * h8500-opc.h Fix CR insn patterns.
1608 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1610 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1611 "cmpl" before POWER versions, so that gas -many uses them.
1613 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1615 * disassemble.c: New file.
1616 * Makefile.in (OFILES): Add disassemble.o.
1617 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1618 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1619 binutils/configure.in.
1621 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1622 opcode being examined.
1624 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1626 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1627 (insert_ral, insert_ram, insert_ras): New functions.
1628 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1629 RAS for store with update.
1631 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1633 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1634 (edelsohn@npac.syr.edu).
1636 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1638 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1641 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1643 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1645 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1647 * ppc-opc.c (powerpc_operands): The signedp field has been
1648 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1649 instead. Add new operand SISIGNOPT.
1650 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1651 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1652 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1655 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1657 * i386-dis.c (struct private): Renamed to dis_private. `private'
1658 is a reserved word for dynix cc.
1660 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1662 * configure.in: Change error message to refer to bfd/config.bfd
1663 rather than bfd/configure.in.
1665 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1667 * ppc-opc.c: Define POWER2 as short alias flag.
1668 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1671 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1673 * i960-dis.c (print_insn_i960): Don't read a second word for
1674 opcodes 0, 1, 2 and 3.
1676 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1678 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1680 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1682 * m68881-ext.c: Removed; no longer used.
1683 * Makefile.in: Changed accordingly.
1685 * m68k-dis.c (ext_format_68881): Don't declare.
1686 (print_insn_m68k): If an instruction uses place 'i', it uses at
1687 least four fixed bytes.
1688 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1689 extended float, convert to double using floatformat_to_double, not
1690 ieee_extended_to_double, and fetch the data before converting it.
1692 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1694 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1695 davidj@ICSI.Berkeley.EDU (David Johnson).
1697 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1699 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1700 PowerPC uses bdnz[l][a].
1702 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1704 * dis-buf.c, i386-dis.c: Include sysdep.h.
1706 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1708 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1710 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1711 by Motorola PowerPC 601 with PPC_OPCODE_601.
1712 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1713 Disassemble Motorola PowerPC 601 instructions as well as normal
1714 PowerPC instructions.
1716 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1718 * i960-dis.c (reg, mem): Just use a static array instead of
1721 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1723 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1724 condition name index if this is for a negated condition.
1726 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1727 Floating point format for 'H' operand is backwards from normal
1728 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1729 operands (fmpyadd and fmpysub), handle bizarre register
1730 translation correctly for single precision format.
1732 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1733 or 'I' operands if the next format specifier is 'M' (fcmp
1734 condition completer).
1736 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1738 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1739 single number giving a bitmask for the MB and ME fields of an M
1740 form instruction. Change NB to accept 32, and turn it into 0;
1741 also turn 0 into 32 when disassembling. Seperated SH from NB.
1742 (insert_mbe, extract_mbe): New functions.
1743 (insert_nb, extract_nb): New functions.
1744 (SC_MASK): Mask out SA and LK bits.
1745 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1746 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1747 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1748 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1749 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1750 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1751 (powerpc_macros): Define table of macro definitions.
1752 (powerpc_num_macros): Define.
1754 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1755 if PPC_OPERAND_NEXT is set.
1757 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1759 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1760 char. Retrieve contents using bfd_getl32 instead of shifting.
1762 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1764 * ppc-opc.c: New file. Opcode table for PowerPC, including
1765 opcodes for POWER (RS/6000).
1766 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1767 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1768 (CFILES): Add ppc-dis.c.
1769 (ppc-dis.o, ppc-opc.o): New targets.
1770 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1772 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1774 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1775 No space before 'u', 'f', or 'N'.
1777 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1779 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1780 farther than we should.
1782 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1784 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1786 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1788 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1790 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1791 needs it, to prevent reading past the end of a section.
1793 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1795 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1796 Removed t,A case for la; always use t,A(b) case.
1798 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1800 From Ted Lemen <mellon@pepper.ncd.com>
1801 * mips-dis.c (print_insn_arg): Handle 'k'.
1802 * mips-opc.c: Make cache use k, not t.
1804 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1806 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1807 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1808 FLOAT_FORMAT_CODE to put out floating point register names.
1810 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1812 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1814 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1816 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1818 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1820 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1821 larger than 32. Moved dsxx32 variants first for disassembler.
1823 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1825 * z8kgen.c, z8k-opc.h: Add full lda information.
1827 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1829 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1830 movb instructions. Any necessary space will be emitted by
1831 the code to handle nullification completers.
1833 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1835 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1837 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1839 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1840 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1842 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1844 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1846 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1848 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1849 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1851 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1853 * m88k-dis.c (m88kdis): comment change. Remove space after
1855 (printop): handle new arg types DEC and XREG for m88110.
1857 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1859 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1860 type for absolute branch addresses. Delete special
1861 "ble" and "be" code in 'W' operand code.
1863 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1865 * mips-opc.c: Set hazard information correctly for branch
1866 likely instructions.
1868 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1870 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1871 info->fprintf_func for printing and info->print_address_func for
1874 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1876 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1878 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1880 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1881 Corrected second case of "b" for disassembler.
1883 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1885 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1886 to BFD swapping routines to correspond to BFD name changes.
1888 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1890 * mips-opc.c: Change div machine instruction to be z,s,t rather
1891 than s,t. Change div macro to be d,v,t rather than d,s,t.
1892 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1893 rem and remu which generates only the corresponding div
1894 instruction. This is for compatibility with the MIPS assembler,
1895 which only generates the simple machine instruction when an
1896 explicit destination of $0 is used.
1897 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1899 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1901 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1902 WR_31 hazard for bal, bgezal, bltzal.
1904 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1906 * hppa-dis.c (print_insn_hppa): Use print function
1907 from within the disassemble_info, not fprintf_filtered.
1909 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1911 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1912 Law, law@cs.utah.edu.)
1914 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1916 * mips-opc.c ("absu"): Removed.
1919 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1921 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1922 Changed hazard information to distinguish between memory load
1923 delays and coprocessor load delays.
1925 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1927 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1929 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1931 * configure.in: Don't pass cpu to config.bfd.
1933 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1935 * m88k-dis.c (m88kdis): Make class unsigned.
1937 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1939 * alpha-dis.c (print_insn_alpha): One branch format case was
1940 missing the instruction name.
1942 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1944 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1945 Add the arch-specific auxiliary files.
1946 (OFILES): Remove the arch-specific auxiliary files
1947 and use BFD_MACHINES instead of DIS_LIBS.
1948 * configure.in: Set BFD_MACHINES based on --with-targets option.
1950 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1952 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1955 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1957 * sparc-opc.c: Change CONST to const to deal with gcc
1958 -Dconst=__const -traditional.
1960 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1962 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1963 coprocessor instructions out of #if 0, and made them use new
1966 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1968 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1970 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1972 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1973 instruction, for use by the disassembler.
1975 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1976 hand-coded sign extensions that depended on 32-bit host ints.
1977 FIXME, we still depend on big-endian host bitfield ordering.
1978 (sparc_print_insn): Set the insn_info_valid field, and the
1979 other fields that describe the instruction being printed.
1981 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1983 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1984 `jmp' instead of just one of them.
1986 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1988 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1989 (fput_fp_reg_r): Renamed from fput_reg_r.
1990 (fput_fp_reg): New function.
1991 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1993 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1995 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1997 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1999 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2001 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2002 don't output a space.
2004 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2006 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2008 * mips-opc.c: New file, containing opcode table from
2009 ../include/opcode/mips.h.
2010 * Makefile.in: Add it.
2012 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2014 * m88k-dis.c: New file, moved in from gdb and changed to use the
2015 new dis-asm.h disassembler interface.
2016 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2017 (m88k-dis.o): New target.
2019 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2021 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2022 argument string const char * to correspond to opcode/mips.h.
2024 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2026 * mips-dis.c: Updated to account for name changes in new version
2028 * Makefile.in: Added header file dependencies.
2030 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2032 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2034 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2036 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2037 extend, rather than shifts.
2039 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2041 * Makefile.in: Undo 15 June change.
2043 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2045 * m68k-dis.c (print_insn_arg): Change return value to byte count
2047 * m68k-dis.c: Re-write to detect invalid operands before
2048 printing anything, so we can handle this the same way we
2049 handle invalid opcodes.
2051 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2053 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2055 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2057 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2060 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2062 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2064 * configure.in: Do make sysdep.h link.
2065 * Makefile.in: Search ../include. Don't search ../bfd.
2067 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2069 Changes from Jeff Law, law@cs.utah.edu:
2070 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2071 Do not print a space before the completers specified by
2074 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2076 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2077 defined, since gdb has been fixed.
2079 Changes from Jeff Law, law@cs.utah.edu:
2080 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2081 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2082 be a *disassemble_info, not a *FILE.
2083 * hppa-dis.c: Support 'd', '!', and 'a'.
2084 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2085 * hppa-dis.c: Delete cases which are no longer needed.
2087 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2089 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2091 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2093 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2096 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2098 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2099 * configure.in: No longer need to configure to get sysdep.h.
2101 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2103 * Patches from Jeffrey Law <law@cs.utah.edu>.
2104 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2105 templates for 1.1 FP computational instructions.
2107 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2109 * h8500-dis.c (print_insn_h8500): Address argument is type
2111 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2114 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2115 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2117 * sparc-dis.c (compare_opcodes): Move static declaration to
2120 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2122 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2123 instruction, remove unimp hack from 'l' argument.
2125 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2127 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2130 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2132 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2133 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2136 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2138 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2139 arrays of string pointers to 2-d arrays of chars, to save
2142 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2144 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2145 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2147 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2149 * hppa-dis.c: New file from Utah, adapted to new disassembler
2151 * Makefile.in: Include it.
2153 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2155 * sh-dis.c, sh-opc.h: New files.
2157 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2159 * alpha-dis.c, alpha-opc.h: New files.
2161 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2163 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2166 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2168 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2170 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2172 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2175 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2177 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2178 and double percent signs a few places.
2180 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2182 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2183 Use info->print_address_func not print_address.
2185 * dis-buf.c (generic_print_address): New function.
2187 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2189 * Makefile.in: Add sparc-dis.c.
2190 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2192 Add `add' instruction to the set that get checked
2193 for a preceding `sethi' in order to print an absolute address.
2194 * (print_insn): Disassembly prefers real instructions.
2195 (is_delayed_branch): Speed up.
2196 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2197 Still missing some float ops, and needs testing.
2198 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2199 F_ALIAS. Use printf, not fprintf, when not passing a file
2201 (compare_opcodes): Check that identical instructions have
2202 identical opcodes, complain otherwise.
2205 * Include reg_names.
2207 Use dis-asm.h/read_memory_func interface.
2209 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2211 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2212 deliberately return non-zero to setjmp from longjmp. Otherwise
2213 this code fails to compile.
2215 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2217 * m68k-dis.c: Fix prototype for fetch_arg().
2219 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2221 * dis-buf.c: New file, for new read_memory_func interface.
2222 Makefile.in (OFILES): Include it.
2223 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2224 Use new read_memory_func interface.
2226 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2228 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2229 * h8500-opc.h: Fix couple of opcodes.
2231 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2233 * Makefile.in: add dvi & installcheck targets
2235 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2237 * Makefile.in: Update for h8500-dis.c.
2239 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2241 * h8500-dis.c, h8500-opc.h: New files
2243 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2245 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2246 ../include/dis-asm.h.
2247 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2248 and ../gdb/m68k-pinsn.c).
2249 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2250 and ../gdb/i386-pinsn.c).
2251 * m68881-ext.c: New file. Moved definition of
2252 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2253 * Makefile.in: Adjust for new files.
2254 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2255 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2256 can be dis-assembled.
2258 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2260 * mips-dis.c (print_insn_arg): Now returns void.
2262 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2264 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2265 files that use the macros.
2267 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2269 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2270 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2271 (CFILES): Added mips-dis.c.
2273 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2275 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2276 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2278 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2280 * Makefile.in: Improve *clean rules.
2281 * configure.in: Allow a default host.
2283 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2285 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2286 files include other sysdep files
2288 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2290 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2292 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2294 * configure.in: For host support, use ../bfd/configure.host
2295 so it stays in sync with the ../bfd/hosts database.
2297 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2299 * configure.in: use cpu-vendor-os triple instead of nested cases
2301 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2303 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2304 *always* the wrong one.
2306 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2308 * z8kgen.c: added copyright info
2310 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2312 * z8k-dis.c (unparse_instr): prettier tabs
2313 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2315 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2317 * configure.in: Add ncr* configuration.
2318 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2319 picayune ANSI compilers happy.
2321 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2323 * configure.in (i386): Make i386 and i486 synonymous for now.
2324 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2326 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2328 * Makefile.in (install): Fix typo.
2330 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2332 * Makefile.in (make): Remove obsolete crud.
2333 (sparc-opc.o): Avoid Sun Make VPATH bug.
2335 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2337 * Makefile.in: since there are no SUBDIRS, remove rule and
2338 references of subdir_do.
2340 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2342 * Makefile.in (install): Get the library name right here too.
2343 Don't install bfd.h, since it's unrelated to this library. No
2344 subdirs to recurse into, either.
2345 (CFILES): The source file has a .c suffix, not .o.
2347 * sparc-opc.c: New file, moved from BFD.
2348 * Makefile.in (OFILES): Build it.
2350 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2352 * z8k-dis.c: fixed forward refferences of some declarations.
2354 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2356 * Makefile.in: get the name of the library right
2358 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2360 * z8k-dis.c: knows how to disassemble z8k stuff
2361 * z8k-opc.h: new file full of z8000 opcodes
2365 version-control: never
projects / deliverable / binutils-gdb.git / blob