1 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-opc.h (regKludge): Renamed to ...
6 * i386-opc.c (i386_optab): Replace regKludge with RegKludge.
8 2007-06-23 H.J. Lu <hongjiu.lu@intel.com>
11 * i386-dis.c (EX): Removed.
17 (PREGRP93...PREGRP97): Likewise.
18 (dis386_twobyte): Updated.
19 (prefix_user_table): Updated. Add PREGRP93...PREGRP97.
20 (OP_EX): Remove Intel syntax handling.
22 2007-06-18 Nathan Sidwell <nathan@codesourcery.com>
24 * m68k-opc.c (m68k_opcodes): Add wdebugl variants.
26 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
28 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
30 * acinclude.m4: Removed.
32 * Makefile.in: Regenerated.
33 * doc/Makefile.in: Likewise.
34 * aclocal.m4: Likewise.
35 * configure: Likewise.
37 2007-06-05 Paul Brook <paul@codesourcery.com>
39 * arm-dis.c (thumb32_opcodes): Display writeback ldrd/strd addresses.
41 2007-05-24 Steve Ellcey <sje@cup.hp.com>
43 * Makefile.in: Regnerate.
44 * configure: Regenerate.
45 * aclocal.m4: Regenerate.
47 2007-05-18 Alan Modra <amodra@bigpond.net.au>
49 * ppc-dis.c (print_insn_powerpc): Don't skip all operands
50 after setting skip_optional.
52 2007-05-16 Peter Bergner <bergner@vnet.ibm.com>
54 * ppc-dis.c (operand_value_powerpc, skip_optional_operands): New.
55 (print_insn_powerpc): Use the new operand_value_powerpc and
56 skip_optional_operands functions to omit or print all optional
58 * ppc-opc.c (BFF, W, XFL_L, XWRA_MASK): New.
59 (XFL_MASK): Delete L and W bits from the mask.
60 (mtfsfi, mtfsfi.): Replace use of BF with BFF. Relpace use of XRA_MASK
61 with XWRA_MASK. Use W.
62 (mtfsf, mtfsf.): Use XFL_L and W.
64 2007-05-14 H.J. Lu <hongjiu.lu@intel.com>
67 * i386-dis.c (Suffix3DNow): Replace "pfmulhrw" with "pmulhrw".
69 2007-05-10 H.J. Lu <hongjiu.lu@intel.com>
71 * i386-opc.h (ShortForm): Redefined.
73 (JumpDword): Likewise.
75 (JumpInterSegment): Likewise.
82 (IgnoreSize): Likewise.
83 (DefaultSize): Likewise.
92 (regKludge): Likewise.
99 2007-05-07 H.J. Lu <hongjiu.lu@intel.com>
101 * i386-dis.c (threebyte_0x38_uses_DATA_prefix): Correct entries
102 for some SSE4 instructions.
103 (threebyte_0x3a_uses_DATA_prefix): Likewise.
105 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
107 * i386-dis.c (CRC32_Fixup): Don't print suffix in Intel mode.
109 * i386-opc.c (i386_optab): Remove IgnoreSize and correct operand
112 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
114 * i386-dis.c (CRC32_Fixup): Properly handle Intel mode and
115 check data size prefix in 16bit mode.
117 * i386-opc.c (i386_optab): Default crc32 to non-8bit and
120 2007-04-30 Mark Salter <msalter@redhat.com>
122 * frv-desc.c: Regenerate.
123 * frv-desc.h: Regenerate.
125 2007-04-30 Alan Modra <amodra@bigpond.net.au>
128 * ppc-opc.c (powerpc_operands): Correct bitm for second entry of MBE.
130 2007-04-27 H.J. Lu <hongjiu.lu@intel.com>
132 * i386-dis.c (modrm): Put reg before rm.
134 2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
137 * i386-dis.c (print_displacement): New.
138 (OP_E): Call print_displacement instead of print_operand_value
139 to output displacement when either base or index exist. Print
140 the explicit zero displacement in 16bit mode.
142 2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
145 * i386-dis.c (print_insn): Also swap the order of op_riprel
146 when swapping op_index. Break when the RIP relative address
148 (OP_E): Properly handle RIP relative addressing and print the
149 explicit zero displacement for Intel mode.
151 2007-04-27 Alan Modra <amodra@bigpond.net.au>
153 * Makefile.am: Run "make dep-am".
154 * Makefile.in: Regenerate.
155 * ns32k-dis.c: Include sysdep.h first.
157 2007-04-24 Andreas Krebbel <krebbel1@de.ibm.com>
159 * opcodes/s390-opc.c (MASK_SSF_RRDRD): Fourth nybble belongs to the
161 * opcodes/s390-opc.txt (pfpo, ectg, csst): Add new z9-ec instructions.
163 2007-04-24 Nick Clifton <nickc@redhat.com>
165 * arm-dis.c (print_insn): Initialise type.
167 2007-04-24 Alan Modra <amodra@bigpond.net.au>
169 * cgen-types.h: Include bfd_stdint.h, not stdint.h.
170 * Makefile.am: Run "make dep-am".
171 * Makefile.in: Regenerate.
173 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
175 * m68k-opc.c: Mark mcfisa_c instructions.
177 2007-04-21 Richard Earnshaw <rearnsha@arm.com>
179 * arm-dis.c (arm_opcodes): Disassemble to unified syntax.
180 (thumb_opcodes): Add missing white space in adr.
181 (arm_decode_shift): New parameter, print_shift. Only decode the
182 shift parameter if set. Adjust callers.
183 (print_insn_arm): Support for operand type q with no shift decode.
185 2007-04-21 Alan Modra <amodra@bigpond.net.au>
187 * i386-opc.c (i386_float_regtab, i386_float_regtab_size): Delete.
189 (i386_regtab): ..here.
190 * i386-opc.h (i386_float_regtab, i386_float_regtab_size): Delete.
192 * ppc-opc.c (powerpc_operands): Delete duplicate entries.
193 (BA_MASK, FXM_MASK, STRM_MASK, VA_MASK, VB_MASK, VC_MASK): Delete.
194 (VD_MASK, WS_MASK, MTMSRD_L, XRT_L): Delete.
195 (powerpc_opcodes): Replace uses of MTMSRD_L and XRT_L.
197 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
199 * m68k-dis.c (print_insn_arg): Show c04 as rambar0 and c05 as
202 2007-04-20 Alan Modra <amodra@bigpond.net.au>
204 * ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
206 * ppc-opc.c (powerpc_operands): Replace bit count with bit mask
207 in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
208 references to following deleted functions.
209 (insert_bd, extract_bd, insert_dq, extract_dq): Delete.
210 (insert_ds, extract_ds, insert_de, extract_de): Delete.
211 (insert_des, extract_des, insert_li, extract_li): Delete.
212 (insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
213 (insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
214 (num_powerpc_operands): New constant.
215 (XSPRG_MASK): Remove entire SPRG field.
216 (powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
218 2007-04-20 Alan Modra <amodra@bigpond.net.au>
220 * ppc-opc.c (DCM, DGM, TE, RMC, R, SP, S): Correct shift.
222 (powerpc_opcodes): Use Z2_MASK in all insns taking RMC operand.
224 2007-04-20 Richard Earnshaw <rearnsha@arm.com>
226 * arm-dis.c (print_insn): Only look for a mapping symbol in the section
229 2007-04-19 Alan Modra <amodra@bigpond.net.au>
231 * Makefile.am: Run "make dep-am".
232 * Makefile.in: Regenerate.
233 * po/POTFILES.in: Regenerate.
235 2007-04-19 Alan Modra <amodra@bigpond.net.au>
237 * ppc-opc.c (powerpc_opcodes): Add cctpl, cctpm, cctph, db8cyc,
238 db10cyc, db12cyc, db16cyc.
240 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
242 * ppc-opc.c (powerpc_opcodes): Recognize three-operand tlbsxe.
244 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
246 * i386-dis.c (CRC32_Fixup): New.
247 (PREGRP85, PREGRP86, PREGRP87, PREGRP88, PREGRP89, PREGRP90,
249 (threebyte_0x38_uses_DATA_prefix): Updated for SSE4.2.
250 (threebyte_0x3a_uses_DATA_prefix): Likewise.
251 (prefix_user_table): Add PREGRP85, PREGRP86, PREGRP87,
252 PREGRP88, PREGRP89, PREGRP90 and PREGRP91.
253 (three_byte_table): Likewise.
255 * i386-opc.c (i386_optab): Add SSE4.2 opcodes.
257 * i386-opc.h (CpuSSE4_2): New.
259 (CpuUnknownFlags): Add CpuSSE4_2.
261 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
263 * i386-dis.c (XMM_Fixup): New.
269 (PREGRP39 ... PREGRP85): New.
270 (threebyte_0x38_uses_DATA_prefix): Updated for SSE4.
271 (threebyte_0x3a_uses_DATA_prefix): Likewise.
272 (prefix_user_table): Add PREGRP39 ... PREGRP85.
273 (three_byte_table): Likewise.
275 (intel_operand_size): Handle dqb_mode, dqd_mode):
279 * i386-opc.c (i386_optab): Add SSE4.1 opcodes.
281 * i386-opc.h (CpuSSE4_1): New.
282 (CpuUnknownFlags): Add CpuSSE4_1.
283 (regKludge): Update comment.
285 2007-04-18 Matthias Klose <doko@ubuntu.com>
287 * Makefile.am (libopcodes_la_LDFLAGS): Use bfd soversion.
288 * Makefile.in: Regenerate.
290 2007-04-14 Steve Ellcey <sje@cup.hp.com>
292 * Makefile.am: Add ACLOCAL_AMFLAGS.
293 * Makefile.in: Regenerate.
295 2007-04-13 H.J. Lu <hongjiu.lu@intel.com>
297 * i386-dis.c: Remove trailing white spaces.
298 * i386-opc.c: Likewise.
299 * i386-opc.h: Likewise.
301 2007-04-11 H.J. Lu <hongjiu.lu@intel.com>
304 * i386-dis.c (GRP1a): New.
305 (GRP1b ... GRPPADLCK2): Update index.
306 (dis386): Use GRP1a for entry 0x8f.
307 (mod, rm, reg): Removed. Replaced by ...
311 2007-04-09 Kazu Hirata <kazu@codesourcery.com>
313 * m68k-dis.c (print_insn_m68k): Restore info->fprintf_func and
314 info->print_address_func if longjmp is called.
316 2007-03-29 DJ Delorie <dj@redhat.com>
318 * m32c-desc.c: Regenerate.
319 * m32c-dis.c: Regenerate.
320 * m32c-opc.c: Regenerate.
322 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
324 * i386-opc.c (i386_optab): Change InvMem to RegMem for mov and
325 movq. Remove InvMem from sldt, smsw and str.
327 * i386-opc.h (InvMem): Renamed to ...
328 (RegMem): Update comments.
329 (AnyMem): Remove InvMem.
331 2007-03-27 Paul Brook <paul@codesourcery.com>
333 * arm-dis.c (thumb_opcodes): Add entry for undefined insns (0xbe??).
335 2007-03-24 Paul Brook <paul@codesourcery.com>
337 * arm-dis.c (coprocessor_opcodes): Remove superfluous 0x.
338 (print_insn_coprocessor): Handle %<bitfield>x.
340 2007-03-24 Paul Brook <paul@codesourcery.com>
341 Mark Shinwell <shinwell@codesourcery.com>
343 * arm-dis.c (arm_opcodes): Print SRS base register.
345 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
347 * i386-dis.c (prefix_name): Replace rex64XYZ with rex.WRXB.
349 * i386-opc.c (i386_optab): Add rex.wrxb.
351 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
353 * i386-dis.c (REX_MODE64): Remove definition.
354 (REX_EXTX): Likewise.
355 (REX_EXTY): Likewise.
356 (REX_EXTZ): Likewise.
357 (USED_REX): Use REX_OPCODE instead of 0x40.
358 Replace REX_MODE64, REX_EXTX, REX_EXTY and REX_EXTZ with REX_W,
359 REX_R, REX_X and REX_B respectively.
361 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
364 * i386-dis.c (PREGRP38): New.
365 (dis386): Use PREGRP38 for 0x90.
366 (prefix_user_table): Add PREGRP38.
367 (print_insn): Set uses_REPZ_prefix to 1 for pause.
368 (NOP_Fixup1): Properly handle REX bits.
369 (NOP_Fixup2): Likewise.
371 * i386-opc.c (i386_optab): Allow %eax with xchg in 64bit.
372 Allow register with nop.
374 2007-03-20 DJ Delorie <dj@redhat.com>
376 * m32c-asm.c: Regenerate.
377 * m32c-desc.c: Regenerate.
378 * m32c-desc.h: Regenerate.
379 * m32c-dis.h: Regenerate.
380 * m32c-ibld.c: Regenerate.
381 * m32c-opc.c: Regenerate.
382 * m32c-opc.h: Regenerate.
384 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
386 * i386-opc.c: Include "libiberty.h".
387 (i386_regtab): Remove the last entry.
388 (i386_regtab_size): New.
389 (i386_float_regtab_size): Likewise.
391 * i386-opc.h (i386_regtab_size): New.
392 (i386_float_regtab_size): Likewise.
394 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
396 * Makefile.am (CFILES): Add i386-opc.c.
397 (ALL_MACHINES): Add i386-opc.lo.
399 * Makefile.in: Regenerated.
401 * configure.in: Add i386-opc.lo for bfd_i386_arch.
402 * configure: Regenerated.
404 * i386-dis.c: Include "opcode/i386.h".
405 (MAXLEN): Renamed to MAX_MNEM_SIZE. Remove definition.
406 (FWAIT_OPCODE): Remove definition.
407 (UNIXWARE_COMPAT): Renamed to SYSV386_COMPAT. Remove definition.
408 (MAX_OPERANDS): Remove definition.
410 * i386-opc.c: New file.
411 * i386-opc.h: Likewise.
413 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
415 * Makefile.in: Regenerated.
417 2007-03-09 H.J. Lu <hongjiu.lu@intel.com>
419 * i386-dis.c (OP_Rd): Renamed to ...
424 2007-03-08 Alan Modra <amodra@bigpond.net.au>
426 * fr30-asm.c: Regenerate.
427 * frv-asm.c: Regenerate.
428 * ip2k-asm.c: Regenerate.
429 * iq2000-asm.c: Regenerate.
430 * m32c-asm.c: Regenerate.
431 * m32r-asm.c: Regenerate.
432 * m32r-dis.c: Regenerate.
433 * mt-asm.c: Regenerate.
434 * mt-ibld.c: Regenerate.
435 * mt-opc.c: Regenerate.
436 * openrisc-asm.c: Regenerate.
437 * xc16x-asm.c: Regenerate.
438 * xstormy16-asm.c: Regenerate.
440 * Makefile.am: Run "make dep-am".
441 * Makefile.in: Regenerate.
442 * po/POTFILES.in: Regenerate.
444 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
446 * opcodes/s390-opc.c (INSTR_RRE_FR, INSTR_RRF_F0FF2, INSTR_RRF_F0FR,
447 INSTR_RRF_UUFF, INSTR_RRF_0UFF, INSTR_RRF_FFFU, INSTR_RRR_F0FF): New
448 instruction formats added.
449 (MASK_RRE_FR, MASK_RRF_F0FF2, MASK_RRF_F0FR, MASK_RRF_UUFF,
450 MASK_RRF_0UFF, MASK_RRF_FFFU, MASK_RRR_F0FF): New instruction format
452 * opcodes/s390-opc.txt (lpdfr - tgxt): Decimal floating point
454 * opcodes/s390-mkopc.c (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
455 (main): z9-ec cpu type option added.
456 * include/opcode/s390.h (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
458 2007-02-22 DJ Delorie <dj@redhat.com>
460 * s390-opc.c (INSTR_SS_L2RDRD): New.
461 (MASK_SS_L2RDRD): New.
462 * s390-opc.txt (pka): Use it.
464 2007-02-20 Thiemo Seufer <ths@mips.com>
465 Chao-Ying Fu <fu@mips.com>
467 * mips-dis.c (mips_arch_choices): Add DSP R2 support.
468 (print_insn_args): Add support for balign instruction.
469 * mips-opc.c (D33): New shortcut for DSP R2 instructions.
470 (mips_builtin_opcodes): Add DSP R2 instructions.
472 2007-02-19 Andreas Krebbel <krebbel1@de.ibm.com>
474 * s390-opc.c (INSTR_RRF_U0FR, MASK_RRF_U0FR): Removed.
475 (INSTR_RRF_U0RF, MASK_RRF_U0RF): Added.
476 * s390-opc.txt (cfxbr, cfdbr, cfebr, cgebr, cgdbr, cgxbr, cger, cgdr,
477 cgxr, cfxr, cfdr, cfer): Instruction type set to INSTR_RRF_U0RF.
479 2007-02-19 Andreas Krebbel <krebbel1@de.ibm.com>
481 * s390-opc.txt ("efpc", "sfpc"): Set to RRE_RR_OPT instruction type.
482 * s390-opc.c (s390_operands): Add RO_28 as optional gpr.
483 (INSTR_RRE_RR_OPT, MASK_RRE_RR_OPT): New instruction type for efpc
486 2007-02-16 Nick Clifton <nickc@redhat.com>
489 * avr-dis.c (comment_start): New variable, contains the prefix to
490 use when printing addresses in comments.
491 (print_insn_avr): Set comment_start to an empty space if there is
492 no symbol table available as the generic address printing code
493 will prefix the numeric value of the address with 0x.
495 2007-02-13 H.J. Lu <hongjiu.lu@intel.com>
497 * i386-dis.c: Updated to use an array of MAX_OPERANDS operands
500 2007-02-05 Dave Brolley <brolley@redhat.com>
501 Richard Sandiford <rsandifo@redhat.com>
502 DJ Delorie <dj@redhat.com>
503 Graydon Hoare <graydon@redhat.com>
504 Frank Ch. Eigler <fche@redhat.com>
505 Ben Elliston <bje@redhat.com>
507 * Makefile.am (HFILES): Add mep-desc.h mep-opc.h.
508 (CFILES): Add mep-*.c
509 (ALL_MACHINES): Add mep-*.lo.
510 (CLEANFILES): Add stamp-mep.
511 (CGEN_CPUS): Add mep.
512 (MEP_DEPS): New variable.
513 (mep-*): New targets.
514 * configure.in: Handle bfd_mep_arch.
515 * disassemble.c (ARCH_mep): New macro.
516 (disassembler): Handle bfd_arch_mep.
517 (disassemble_init_for_target): Likewise.
518 * mep-*: New files for Toshiba Media Processor (MeP).
519 * Makefile.in: Regenerated.
520 * configure: Regenerated.
522 2007-02-05 H.J. Lu <hongjiu.lu@intel.com>
524 * i386-dis.c (OP_J): Undo the last change. Properly handle 64K
525 wrap around within the same segment in 16bit mode.
527 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
529 * i386-dis.c (OP_J): Mask to 16bit only if there is a data16
532 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
534 * avr-dis.c (avr_operand): Correct PR number in comment.
536 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
538 * disassemble.c (disassembler_usage): Call
539 print_i386_disassembler_options for i386 disassembler.
541 * i386-dis.c (print_i386_disassembler_options): New.
542 (print_insn): Support the new addr64 option.
544 2007-02-02 Hiroki Kaminaga <kaminaga@sm.sony.co.jp>
546 * ppc-dis.c (powerpc_dialect): Handle ppc440.
547 * ppc-dis.c (print_ppc_disassembler_options): Note the -M440 can
550 2007-02-02 Alan Modra <amodra@bigpond.net.au>
552 * ppc-opc.c (insert_bdm): -Many comment.
553 (valid_bo): Add "extract" param. Accept both powerpc and power4
554 BO fields when disassembling with -Many.
555 (insert_bo, extract_bo, insert_boe, extract_boe): Adjust valid_bo call.
557 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
559 * m68k-opc.c (m68k_opcodes): Replace cpu32 with
560 cpu32 | fido_a except on tbl instructions.
562 2007-01-04 Paul Brook <paul@codesourcery.com>
564 * arm-dis.c (arm_opcodes): Fix cpsie and cpsid entries.
566 2007-01-04 Andreas Schwab <schwab@suse.de>
568 * m68k-opc.c: Fix encoding of signed bit in the cpu32 tbls insns.
570 2007-01-04 Julian Brown <julian@codesourcery.com>
572 * arm-dis.c (neon_opcode): Fix disassembly for vshl, vqshl, vrshl,
575 For older changes see ChangeLog-2006
581 version-control: never