2 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
4 * po/opcodes.pot: Regenerate.
5 * po/POTFILES.in: Regenerate.
6 * fr30-opc.c: Regenerate.
7 * fr30-opc.h: Regenerate.
10 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
12 * m32r-asm.c: Regenerate.
15 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
17 * configure.in: Added case for bfd_fr30_arch.
18 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
19 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
20 (CLEANFILES): Added stamp-fr30.
22 * fr30-asm.c: New file.
23 * fr30-dis.c: New file.
24 * fr30-opc.c: New file.
25 * fr30-opc.h: New file.
26 * po/POTFILES.in: Regenerated
27 * po/opcodes.pot: Regenerated
31 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
33 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
34 to bcl8,bncl8 entries.
35 (macro_insn_table_entries): Add FILL_SLOT attribute
36 to bcl8r,bncl8r entries.
39 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
41 * configure.in: detect cygwin* instead of cygwin32*
42 * configure: regenerate
44 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
46 * mips-opc.c (IS_M): Added.
49 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
51 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
55 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
58 * cgen-asm.in (insert_1): New function.
59 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
60 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
61 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
62 * cgen-dis.in (extract_1): New function.
63 (extract_normal): buf_ctrl renamed to ex_info, update type.
64 Progress on handling of CGEN_INT_INSN_P.
65 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
66 Update handling of CGEN_INT_INSN_P. Handle errors from
67 @arch@_cgen_extract_operand.
68 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
69 (default_print_insn): Renamed from print_insn.
70 Handle ! CGEN_INT_INSN_P.
71 (print_insn_@arch@): Handle error returns from print_insn.
72 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
73 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
74 (@arch@_cgen_lookup_get_insn_operands): Ditto.
76 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
79 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
81 * m10300-opc.c: Allow autoincrement stores using the same register
82 for source and destination operands.
84 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
86 * m10300-opc.c: DSP instrutions which only write to one general
87 register have no restrictions on matching operands.
89 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
92 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
94 * m32r-opc.h,m32r-opc.c: Regenerate.
97 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
99 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
102 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
104 * i386-dis.c (OP_3DNowSuffix): New static function.
107 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
108 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
109 (insn_codep): New static variable.
110 (print_insn_x86): Init insn_codep after prefixes.
111 (grps): Add GRP14 entries for prefetch, prefetchw.
114 From Jeff B Epler <jepler@usgs.gov>
115 * i386-dis.c (Suffix3DNow): New table.
117 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
119 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
121 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
123 * d10v-dis.c (print_operand): If num is nonzero, then
124 add OPERAND_ACC1, not OPERAND_ACC0.
126 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
128 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
131 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
133 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
137 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
139 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
142 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
144 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
146 start-sanitize-nortel-ppc750
147 1998-09-09 Michael Meissner <meissner@cygnus.com>
149 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
152 end-sanitize-nortel-ppc750
153 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
155 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
157 (print_insn_little_arm): Detect Thumb symbols in elf object
160 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
162 * alpha-dis.c (print_insn_alpha): Use the machine type to
163 decide which PALcode set to include.
165 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
167 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
169 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
171 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
172 MSUB and MSUBS instructions.
175 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
177 * mips-opc.c: Insert contents of vu0.h, rather than including it.
179 * Makefile.am: Rebuild dependencies.
183 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
185 * ppc-opc.c (powerpc_operands): Omit parens around additions in
188 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
190 start-sanitize-coldfire
191 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
192 ColdFire, as below for mulsl and mulul.
194 end-sanitize-coldfire
195 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
196 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
197 +, -, and d for ColdFire.
199 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
200 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
201 (extract_mbe): Likewise.
203 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
205 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
207 * m10300-opc.c: First cut at UDF instructions.
209 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
211 * m32r-opc.c: Regenerate (remove semantic descriptions).
213 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
215 * arm-dis.c (print_insn_big_arm): Fix indentation.
216 (print_insn_little_arm): Likewise.
218 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
220 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
222 (print_insn_little_arm): Likewise.
224 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
226 Move all global state data into opcode table struct, and treat
227 opcode table as something that is "opened/closed".
228 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
229 (cgen_asm_init): Delete.
230 (cgen_set_parse_operand_fn): New function.
231 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
232 (cgen_dis_init): Delete.
233 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
234 (cgen_current_{opcode_table_mach,endian}): Delete.
235 start-sanitize-cygnus
236 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
237 * cgen-dis.in (all fns): Ditto.
238 * cgen-opc.in (all fns): Ditto.
240 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
242 start-sanitize-cygnus
243 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
245 * cgen-dis.in (print_normal): Split into two.
246 (print_address): New function.
247 (extract_insn_normal): Clarify insn_value arg.
248 (print_int_insn): Renamed from print_insn.
249 (print_insn): New arg.
250 (print_insn_@arch@): Open opcode table if not already done so.
251 Move reading of insn into print_insn.
254 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
256 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
260 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
262 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
263 accept an accumulator choice.
264 * m32r-opc.c,m32r-opc.h: Regenerate.
267 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
269 * m10300-opc.c: Add entries for "no_match_operands" field in
273 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
275 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
279 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
281 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
284 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
286 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
288 * m10300-opc.c: Add autoincrement memory loads/stores.
292 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
294 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
295 phmsubh respectively.
298 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
300 start-sanitize-cygnus
301 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
303 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
304 @arch_cgen_get_int_operand.
305 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
306 Update call to @arch@_cgen_insert_operand.
307 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
308 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
309 (extract_insn_normal): New arg `pc', callers updated.
310 Update call to @arch@_cgen_extract_operand.
311 (print_insn): Update call to CGEN_EXTRACT_FN.
313 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
316 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
318 * m10300-opc.c: Fix load to sp and store from sp for the am33.
319 Add more multimedia instructions.
321 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
323 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
328 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
330 * mips-opc.c (pref): Enabled for the r5900.
333 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
335 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
337 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
339 (OP_J): Remove unnecessary subtraction when 16-bit displacement
340 will be masked later.
343 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
345 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
348 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
350 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
351 from raw register #s to symbolic names to make debugging easier.
354 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
356 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
358 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
360 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
361 start-sanitize-cygnus
362 * Makefile.am (CGENDIR): Set via configure.
363 (CGEN): New variable.
364 (CGENFILES): object.scm renamed to cos.scm.
365 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
366 (stamp-m32r): Pass prefix to run-cgen.
367 * Makefile.in: Regenerate.
368 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
369 * cgen-dis.in: Ditto.
370 * cgen-opc.in: Ditto.
371 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
372 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
373 * configure: Regenerate.
377 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
379 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
381 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
383 * m10300-opc.c: Reorder more instructions so that we do not
384 accidentally match a mn10300 instruction when we really
385 wanted an am33 instruction.
388 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
390 * m10300-dis.c: Only recognize instructions from the currently
392 * m10300-opc.c: Add field indicating the particular variant of
393 the mn10300 each instruction is available on.
395 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
397 * configure.in: For bfd_vax_arch, build vax-dis.lo.
398 * Makefile.am: Rebuild dependencies.
399 (CFILES): Add vax-dis.c.
400 (ALL_MACHINES): Add vax-dis.lo.
401 * aclocal.m4: Rebuild with current libtool.
402 * configure, Makefile.in: Rebuild.
404 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
406 * vax-dis.c: New file, from work by Pauline Middelink
407 <middelin@polyware.iaf.nl>.
408 * disassemble.c (ARCH_vax): Define if ARCH_all.
409 (disassembler): Add case for ARCH_vax.
410 * makefile.vms: Support compilation on vms/vax.
413 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
415 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
416 the DVP_OPERAND_RELOC_11_S4 relocation.
420 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
422 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
424 (disassemble): Correctly handle FMT_D10 instructions.
426 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
427 am33 shift instructions.
429 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
431 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
432 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
434 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
435 (mn10300_opcodes): Reorder so as to try and select opcodes from
436 the core chip when multiple alternatives exist. Change several
437 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
438 "macbu" instructions. Fix typos in a couple DSP instructions too.
441 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
443 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
444 related to sign extension and the size of ints.
446 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
448 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
449 instructions. Support (sp) addressing mode by expanding it into
453 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
455 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
456 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
457 be used as immediate values.
461 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
463 * m10300-opc.c: Support 4 byte DSP instructions.
466 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
468 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
471 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
473 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
476 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
478 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
481 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
483 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
484 found on the mn10300.
487 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
489 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
492 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
494 * mips-dis.c (print_insn_little_mips): Previously, instruction
495 printing references the symbol table to determine whether the
496 instruction resides in a block regular instructions or mips16
497 instructions. However, when the disassembler gets used in other
498 environments where the symbol table is not present, we no longer
499 rely in the symbol table, rather, use the low bit of the
500 instructions address to guess. There should be no change for usage
501 of the disassembler in host based programse, gdb ,objdump.
502 (print_insn_big_mips): ditto.
503 (print_insn_mips): ditto
505 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
507 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
509 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
512 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
513 operands for the am33.
514 (mn10300_opcodes): Add new instructions from the am33.
516 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
518 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
520 * i386-dis.c (index16): Add '%' to register names. Use ','
523 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
525 * i386-dis.c: Don't print opcode suffix when we can figure out the
526 size (and gas can!) by register operands, or from the default
528 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
530 (dis386, dis386_twobyte, grps): Use new suffix macros.
531 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
532 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
533 order of cmps operands to agree with Intel docs. Correct operand
534 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
535 agree with Intel docs.
536 (print_insn_x86): Print orphan fwait before other prefixes.
537 Return correct byte count for orphan fwait with prefixes. Don't
538 print `bound' operands in reverse order.
539 (ckprefix): Stop accumulating prefixes if we get fwait.
540 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
542 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
544 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
545 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
547 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
549 Fix problems when bfd_vma is wider than long.
550 * i386-dis.c: Make op_address and start_pc unsigned.
551 (set_op): Make parameter unsigned.
552 (print_insn_x86): Cast to bfd_vma when passing a value to
554 * ns32k-dis.c (CORE_ADDR): Don't define.
555 (print_insn_ns32k): Change type of addr to bfd_vma. Use
556 bfd_scan_vma to read back address.
557 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
559 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
560 (NEXTULONG): New definition.
561 (print_insn_m68k): Avoid overflow when computing third argument of
563 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
564 Use disp instead of val to store offset values.
565 (print_indexed): Use base_disp instead of word to store base
566 displacement, to avoid overflow.
567 * m10300-dis.c (disassemble): Cast value to long when computing
568 pc-relative address, to get correct sign extension.
570 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
572 * m32r-opc.c: Regenerate.
574 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
576 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
577 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
579 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
581 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
583 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
585 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
587 (OP_DSreg): Rename from OP_DSSI.
588 (OP_ESreg): Rename from OP_ESDI.
589 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
591 (append_seg): Rename from append_prefix.
592 (ptr_reg): New function.
593 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
595 (PREFIX_ADDR): Rename from PREFIX_ADR.
596 (float_reg): Add non-broken opcodes for people who don't want
599 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
601 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
604 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
606 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
608 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
610 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
611 0; produce error message for shifts of size 32 (or 64 for 64-bit
612 shifts), because the hardware doesn't support them.
615 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
617 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
620 * vu0.h (sqc2): Fix opcode.
622 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
626 start-sanitize-cygnus
627 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
629 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
630 Change pinfo to use WR_HILO.
633 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
635 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
636 LONG_2, LONG_2b formats to use this new operand.
638 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
640 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
642 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
644 * sparc-dis.c (print_insn_sparc): big endian instruction / little
647 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
649 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
650 and SHORT_B3b formats to use Rb instead of Ra.
652 Add FLAG_MUL16 to MUL2XH opcode.
654 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
655 to existing 1.1.1 parallelisation prohibition procedure.
657 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
659 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
660 * cgen-dis.in (extract_normal): Likewise.
661 * m32r-asm.c,m32r-dis.c: Regenerate.
664 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
666 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
670 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
672 * mips-opc.c (multu1): Add two operand variant for the r5900.
675 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
677 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
678 with a shift count of 0.
681 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
683 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
685 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
687 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
688 (_print_insn_mips): Likewise.
689 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
693 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
695 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
696 (cgen_hw_lookup_by_num): New function.
699 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
702 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
704 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
706 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
708 * sparc-dis.c (print_insn_sparc): Always fetch instructions
709 as big-endian on SPARClite.
712 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
714 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
716 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
720 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
722 * d30v-opc.c (pre_defined_register): Remove alias for r0.
725 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
727 * mips-opc.c (break): Added 20-bit single-operand break
728 instruction for R5900 only.
731 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
733 * po/Make-in (install-info): New target.
735 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
737 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
738 * configure: Rebuild.
740 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
742 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
743 variety of ISA2 instructions to set bottom ten bits of trap code.
745 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
747 * Makefile.am (config.status): Add explicit target so that
748 config.status depends upon bfd/configure.in.
749 * Makefile.in: Rebuild.
751 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
753 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
754 instructions to set bottom ten bits of break code.
755 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
756 for above optional argument.
758 start-sanitize-cygnus
759 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
761 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
762 * m32r-opc.h: Regenerate.
765 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
767 * makefile.vms: Run dec c with /nodebug.
769 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
771 * Makefile.in: Rebuilt.
772 * Makefile.am: Regenerated dependencies with mkdep.
774 * opintl.h (_): Define as dgettext.
776 start-sanitize-cygnus
777 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
779 * configure.in: Add support for --enable-cgen-maint.
780 * Makefile.am (M32R_DEPS): New variable.
781 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
782 * aclocal.m4: Regenerate.
783 * Makefile.in: Regenerate.
784 * configure: Regenerate.
786 * Makefile.am (CGENFILES): Add minsn.scm.
789 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
791 * cgen-asm.c: Internationalised.
792 start-sanitize-cygnus
793 * cgen-asm.in: Internationalised.
794 * cgen-opc.in: Internationalised.
796 * m32r-asm.c: Internationalised.
797 * m32r-dis.c: Internationalised.
798 * m32r-opc.c: Internationalised.
800 * aclocal.m4: Regenerated.
801 * configure: Regenerated.
802 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
803 * Makefile.in: Rebuild.
804 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
805 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
807 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
809 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
811 * aclocal.m4, configure: Rebuild with current tools.
813 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
815 * opintl.h: New file - contains internationalisation macros used
816 by source files in this directory.
817 * po/: New subdirectory - contains internationalisation files.
818 * po/Make-in: New file - Makefile constructor.
819 * po/POTFILES.in: New file - list of files in opcodes directory
820 that should be scan for internationalisation macros.
821 * po/opcodes.pot: New file - list of internationisation strings
822 found in files mentioned in po/POTFILES.in.
823 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
824 entry. Add intl directory to include paths.
825 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
826 HAVE_STRCPY, HAVE_LC_MESSAGES
827 * configure.in: Add rule to build Makefile in po subdirectory.
828 * Makefile.in: Rebuilt.
829 * aclocal.m4: Rebuilt.
830 * config.in: Rebuilt.
831 * configure: Rebuilt.
832 * alpha-opc.c: Internationalised.
833 * arc-dis.c: Internationalised.
834 * arc-opc.c: Internationalised.
835 * arm-dis.c: Internationalised.
836 * cgen-asm.c: Internationalised.
837 * d30v-dis.c: Internationalised.
838 * dis-buf.c: Internationalised.
840 * dvp-dis.c: Internationalised.
841 * dvp-opc.c: Internationalised.
843 * h8300-dis.c: Internationalised.
844 * h8500-dis.c: Internationalised.
845 * i386-dis.c: Internationalised.
846 * m10200-dis.c: Internationalised.
847 * m10300-dis.c: Internationalised.
848 * m68k-dis.c: Internationalised.
849 * m88k-dis.c: Internationalised.
850 * mips-dis.c: Internationalised.
851 * ns32k-dis.c: Internationalised.
852 * opintl.h: Internationalised.
853 * ppc-opc.c: Internationalised.
854 * sparc-dis.c: Internationalised.
855 * v850-dis.c: Internationalised.
856 * v850-opc.c: Internationalised.
858 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
860 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
861 (asm_hash_table_entries): New variable.
862 (cgen_asm_init): Free asm_hash_table_entries.
863 (hash_insn_array,hash_insn_list): New functions.
864 (build_asm_hash_table): Use them. Hash macro insns as well.
865 (cgen_asm_lookup_insn): Update.
866 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
867 (dis_hash_table_entries): New variable.
868 (cgen_dis_init): Free dis_hash_table_entries.
869 (hash_insn_array,hash_insn_list): New functions.
870 (build_dis_hash_table): Use them. Hash macro insns as well.
871 (cgen_dis_lookup_insn): Update.
872 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
873 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
874 (cgen_macro_insn_count): New function.
875 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
876 All callers updated. Sanity check result of extract fn.
877 (@arch@_cgen_get_insn_operands): Change result type to void.
878 Delete args insn_value, length. New arg fields. All callers updated.
879 (@arch@_cgen_lookup_get_insn_operands): New function.
880 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
882 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
884 * i386-dis.c (OP_DSSI): Print segment override.
887 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
889 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
893 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
895 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
899 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
901 * vu0.h (vlqd, vlqi): Update per revised specs.
905 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
907 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
908 (vif_operands): Update.
909 (vif_get_unpackloc): Delete.
910 (state_vif_unpackloc{,_star_p}): Delete.
911 (dvp_opcode_init_parse): Update.
912 (vif_unpack_len_value): Avoid divide by zero.
916 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
918 * vu0.h: Specs changed for VCALLMSR bit pattern.
919 * mips-dis.c: (print_insn_arg) Matching change.
922 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
924 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
927 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
929 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
930 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
931 * configure.in: Define and substitute WIN32LDFLAGS and
933 * aclocal.m4: Rebuild with new libtool.
934 * configure, Makefile.in: Rebuild.
937 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
939 * vu0.h: Corrected bit pattern for VMAXI opcode.
942 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
944 * m32r-opc.c: Regenerate.
947 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
949 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
950 (dvp_expand_macro): Implement.
951 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
952 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
955 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
957 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
958 before trying to copy it.
959 * Makefile.in: Rebuild.
961 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
963 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
966 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
968 * m32r-opc.c: Fix bit patterns for SAT and SATB.
971 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
973 * ns32k-dis.c (bit_extract_simple): New function to extract bits
974 from an arbitrary valid buffer instead of fetching them on demand
976 (invalid_float): use bit_extract_simple() instead of bit_extract().
979 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
981 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
982 * m32r-opc.h: Add extra control registers.
985 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
987 From H.J. Lu <hjl@gnu.org>:
988 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
991 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
993 * Branched binutils 2.9.
995 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
997 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
998 disassembling last 4 bytes of a section.
1000 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1002 Fix some gcc -Wall warnings:
1003 * arc-dis.c (print_insn): Add casts to avoid warnings.
1004 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1005 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1007 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1008 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1009 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1010 (parse_ffstreg, parse_vif_mode): Likewise.
1012 * m10200-dis.c (disassemble): Likewise.
1013 * m10300-dis.c (disassemble): Likewise.
1014 * ns32k-dis.c (print_insn_ns32k): Likewise.
1015 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1016 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1017 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1018 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1019 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1021 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1022 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1023 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1025 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1026 start-sanitize-tic80
1027 * tic80-dis.c (print_one_instruction): Likewise.
1029 * w65-dis.c (print_operand): Likewise.
1030 * z8k-dis.c (fetch_data): Likewise.
1031 * a29k-dis.c: Add return type for find_byte_func_type.
1032 * arc-opc.c: Include <stdio.h>. Remove declarations of
1033 insert_multshift and extract_multshift.
1034 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1036 (extract_value): Fully parenthesize expression.
1038 * dvp-opc.c: Include <ctype.h>.
1039 (print_sdest): Add default case to switch.
1041 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1042 * h8500-opc.h (h8500_table): Fully bracket initializer.
1043 * w65-opc.h (optable): Likewise.
1044 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1045 * i386-dis.c (OP_E): Initialize local variables.
1046 * m10200-dis.c (print_insn_mn10200): Likewise.
1047 * mips-dis.c (print_insn_mips16): Likewise.
1048 * sh-dis.c (print_insn_shx): Likewise.
1049 * v850-dis.c (print_insn_v850): Likewise.
1050 * ns32k-dis.c (print_insn_arg): Declare.
1051 (get_displacement, invalid_float): Declare.
1052 (list_search, sign_extend, flip_bytes): Declare return type.
1053 (get_displacement): Likewise.
1054 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1056 (print_insn_ns32k): Make i unsigned.
1057 (invalid_float): Make static. Declare type of val.
1058 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1059 on each for iteration.
1060 * tic30-dis.c (get_indirect_operand): Likewise.
1061 * z8k-dis.c (print_insn_z8001): Declare return type.
1062 (print_insn_z8002): Likewise.
1063 (unparse_instr): Fix sprintf format strings.
1065 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1067 * mips-opc.c: Add "sync.l" and "sync.p".
1070 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1072 * dvp-opc.c (extract_vif_datalen): Rewrite.
1073 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1075 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1077 * dvp-dis.c (print_insn): Print unpack address in hex.
1078 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1079 Don't skip over '*', just record it.
1080 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1081 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1082 Don't skip over '*', just record it.
1083 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1084 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1085 (vif_opcodes): Likewise.
1086 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1087 (vif_macros,vif_macro_count): New globals.
1088 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1089 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1090 (vif_get_wl_cl): New function.
1091 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1094 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1096 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1097 default m68k variant to recognize.
1099 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1100 (ctrl, cobr, mem, ea): Likewise.
1101 (print_addr): Likewise. Remove cast.
1102 (ea): Cast argument of print_addr to bfd_vma.
1104 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1106 (cgen_parse_unsigned_integer): Likewise.
1107 (cgen_parse_address): Likewise.
1109 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1111 * i960-dis.c (ctrl): Add full braces to structure initialization.
1112 (cobr, mem, reg): Likewise.
1113 (ea): Correct parenthesization in expression.
1115 * cgen-asm.c: Include <ctype.h>.
1116 (build_asm_hash_table): Remove unused local variable i.
1117 (cgen_parse_keyword): Add casts to avoid warnings.
1119 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1120 symbol. Fix indentation.
1121 (print_insn_little_arm): Likewise.
1123 start-sanitize-r5900
1124 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1126 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1130 start-sanitize-m32rx
1131 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1133 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1138 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1140 * dvp-opc.c (vif_operand_datalen_special): New global.
1143 start-sanitize-r5900
1144 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1146 * vu0.h (vcallms): Use 'O' for call target operand.
1147 * mips-dis.c (print_insn_arg): Handle 'O'.
1150 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1152 * configure.in: Use AM_DISABLE_SHARED.
1153 * aclocal.m4, configure: Rebuild with libtool 1.2.
1155 start-sanitize-r5900
1156 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1158 * mips-dis.c: Change '%' to '#' in r5900 support.
1162 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1164 These patches are courtesy of Jonathan Walton and Tony Thompson
1165 (athompso@cambridge.arm.com).
1167 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1170 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1171 both the offset and the label closest to the destination.
1173 start-sanitize-r5900
1174 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1176 * vu0.h: New file with cop2/vu0 instructions.
1177 * mips-opc.c: Include vu0.h.
1178 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1180 (print_insn_mips): Do not emit a tab after an instruction if the
1181 first arg is an instruction completer (&). If the next arg is an
1182 escape character (%), then print the next arg verbatim.
1183 * Makefile.am (mips-opc.lo): Depend on vu0.h
1187 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1189 * dvp-opc.c (vif_opcodes): Add stcycl.
1191 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1193 * dvp-dis.c (print_dma): Change length from 16 to 8.
1196 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1198 * m32r-opc.h: Regenerate.
1201 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1203 * dvp-opc.c (print_dest1): Print dest spec again.
1204 (print_vfreg,print_accdest): Likewise.
1205 (vif_unpack_len): Round result up to word boundary.
1208 start-sanitize-vr4320
1209 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1211 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1213 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1215 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1220 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1222 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1223 (print_insn): Do mask comparison on proper opcode word.
1224 Print unsigned values in hex.
1225 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1226 (parse_bc): Catch missing dest.
1227 (parse_vfreg): Replace atoi call with strtol.
1228 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1229 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1230 (extract_gif_eop): New function.
1231 (gif_operands): Update eop entry.
1232 (VGIFOP,VGIFNREGS): Fix calcs.
1233 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1234 (gif_regs): Add entry for unused 11 case.
1235 (print_gif_regs): Print empty list instead of nothing.
1236 (extract_gif_nloop): Fix value calc.
1237 (print_gif_nloop): Always print value, even if 0.
1238 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1239 (vif_operands): Use them for wl,cl fields.
1240 (state_vif_wl,state_vif_cl): New static locals.
1241 (parse_vif_mode): Handle numeric args.
1242 (vif_unpack_len_value,vif_unpack_len): New functions.
1243 (vif_insn_len): Call vif_unpack_len.
1246 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1248 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1250 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1252 * cgen-asm.in: Move insertion of generated routines to top of file.
1253 (insert_normal): Add prototype. Delete `shift' arg.
1254 * cgen-dis.in: Move insertion of generated routines to top of file.
1255 (extract_normal): Add prototype. Delete `shift' arg.
1256 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1257 (print_keyword): Add prototype. Fix type of `attrs' arg.
1259 start-sanitize-vr4320
1260 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1262 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1263 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1266 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1268 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1269 assume that info->symbols is non-empty.
1271 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1273 * alpha-opc.c (cvtqs) There is no such thing.
1274 (cvttq): Missing most of the /*d variants.
1276 start-sanitize-r5900
1277 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1279 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1281 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1282 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1285 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1287 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1288 delayed branches or jumps.
1291 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1293 * dvp-opc.c (vif_operands): Add unpack[u] support.
1294 (vif_opcodes): Ditto.
1295 (*_vif_imrubits): Renamed from *_vif_imrbits.
1297 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1299 * dvp-dis.c (print_insn): Handle word number.
1300 Handle mips address vs vu address.
1301 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1302 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1303 ({insert,extract}_dma_addr): Fix word ofset.
1304 ({insert,print}_gif_regs): Fix encode/decode.
1307 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1309 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1311 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1312 * tic30-dis.c (print_branch): Likewise.
1314 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1315 * dvp-dis.c (dvp_info_mach_type): New function.
1316 (print_insn_dvp): Call it.
1317 (print_vif): Return length of 4 if mpg or direct insn so following
1318 insns get properly disabled.
1319 (print_gif): Fix word order.
1320 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1321 (gif_operands): Fix word order.
1322 (gif_opcodes): Likewise.
1323 ({insert,extract,print}_gif_regs): Likewise.
1324 (gif_regs): Add new register number/name changes.
1325 (dma_opcodes): Add dmarefe insn.
1328 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1330 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1331 saved_symbol code as it is no longer needed.
1333 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1335 * cgen-asm.c: Include symcat.h.
1336 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1338 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1341 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1343 * dvp-opc.c (extra_dma_flags): Fix typos.
1344 (dma_operands): Fix word numbers.
1345 (dma_opcodes): Likewise.
1346 ({insert,extract}_dma_flags): Likewise.
1349 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1351 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1354 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1356 * dvp-dis.c (print_gif): Complete.
1357 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1358 (state_gif_{nregs,regs,nloop}): New static locals.
1359 (*_gif_*): Complete.
1360 (dvp_opcode_init_{parse,print}): Init gif state locals.
1361 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1362 (vif_insn_len): Handle `unpack'.
1363 ({insert,extract}_dma_flags): Complete.
1366 start-sanitize-r5900
1367 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1369 * mips-opc.c (mula.s): Renamed from multa.s.
1372 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1374 * m32r-opc.[ch]: Regenerate.
1377 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1379 * dvp-opc.c (dma_operands): Rewrite.
1380 (dma_operand_{count,addr}): New globals.
1381 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1382 (insert_dma_addr): Insert value into insn.
1383 (extract_dma_addr): Extract value from insn.
1385 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1387 * dvp-dis.c (print_vu): Handle loi insns.
1388 (print_insn): Likewise.
1389 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1390 (vu_operands): Make LDEST1 a FAKE operand.
1391 (parse_dest1): Allow elided argument.
1392 (print_dest1): Don't print the argument.
1394 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1396 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1397 (print_vfreg): Don't print dest spec.
1398 (parse_accdest): Dest spec is optional.
1399 (print_accdest): Don't print dest spec.
1402 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1404 * Makefile.am (CGENFILES): Update.
1405 * Makefile.in: Regenerate.
1406 * cgen-asm.in (insert_normal): Result is error message now.
1407 Validate value to be inserted.
1408 (insert_insn_normal): Result is error message now.
1409 (@arch@_cgen_assemble_insn): Update.
1410 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1411 arguments. Don't perform validation here.
1412 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1414 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1416 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1417 operand instance list.
1418 * m32r-opc.c: Regenerate.
1420 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1422 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1423 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1425 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1427 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1429 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1431 * configure.in: Get the version number from BFD.
1432 * configure: Rebuild.
1434 From H.J. Lu <hjl@gnu.org>:
1435 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1436 * Makefile.in: Rebuild.
1438 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1440 * m32r-opc.c: Regenerate.
1441 * m32r-opc.h: Regenerate.
1443 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1445 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1446 Ignore ALIAS insns if asked to.
1447 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1448 * m32r-opc.c: Regenerate.
1451 * dvp.opc.c: Nicely format opcode tables.
1452 (vu_operands): New element UFLAGS.
1453 (parse_uflags,print_uflags): New functions.
1454 (vu_upper_opcodes): Add UFLAGS to all insns.
1457 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1459 Fix rac to accept only a0:
1460 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1461 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1462 Introduce OPERAND_GPR.
1463 * d10v-dis.c (print_operand): Likewise.
1465 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1467 * cgen-opc.in: New file.
1468 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1469 * Makefile.am (CGENFILES): Add cgen-opc.in.
1470 * Makefile.in: Regenerate.
1472 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1473 (cgen_hw_lookup): Make result const.
1475 * cgen-dis.in (*): Use PTR instead of void *.
1476 (print_insn): Delete unused vars `i', `syntax'.
1478 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1481 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1483 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1484 (vif_opcodes): Update renamed insns.
1485 * dvp-dis.c (*): Likewise.
1488 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1490 * configure, aclocal.m4: Rebuild with new libtool.
1492 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1494 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1495 instructions use a PC relative branch, not absolute.
1497 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1499 * configure.in: Set libtool_enable_shared rather than
1500 libtool_shared. Remove diversion hack.
1501 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1503 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1505 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1506 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1508 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1510 * tic30-dis.c: New file.
1511 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1512 * configure.in: Handle bfd_tic30_arch.
1513 * Makefile.am: Rebuild dependencies.
1514 (CFILES): Add tic30-dis.c
1515 (ALL_MACHINES): Add tic30-dis.lo.
1516 * configure, Makefile.in: Rebuild.
1518 start-sanitize-m32rx
1519 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1521 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1522 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1523 macwhi-a and macwlo-a instructions.
1527 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1529 * dvp-opc.c, fixed encoding of a bunch of instructions to
1530 be consistent with the asmvu assembler (and inconsistent
1531 with the specification).
1533 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1535 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1536 in the opcode table. The pkemscalf instruction must come first.
1538 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1540 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1543 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1545 * m32r-opc.h (HAVE_CPU_M32R): Define.
1548 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1550 * dvp-dis.c, dvp-opc.c: New files.
1551 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1552 * configure: Regenerate.
1553 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1554 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1555 (mips-dis.lo): Compile with @archdefs@.
1556 * Makefile.in: Regenerate.
1557 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1558 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1561 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1563 * v850-opc.c (insertion routines): If both alignment and size is
1564 wrong then report this.
1566 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1568 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1569 Only recognize instructions for the current target_processor.
1571 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1573 * d10v-dis.c (PC_MASK): Correct value.
1574 (print_operand): If there's a reloc, don't calculate the
1575 address because they could be in different sections.
1577 start-sanitize-cygnus
1578 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1580 * cgen.sh: Rewrite to be like simulator's version.
1581 * Makefile.am (cgen): Update call to cgen.sh.
1582 * Makefile.in: Regenerate
1585 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1587 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1588 instruction after the 4650's "mul" instruction; nobody's using the
1589 4010 these days. If object files someday indicate which processor
1590 variant they're intended for, we can do a better job at this.
1592 start-sanitize-r5900
1593 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1595 * mips-opc.c (c.lt.s): Add r5900 variant.
1599 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1601 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1602 table provided entry size. Use CGEN_INSN_MNEMONIC.
1603 (cgen_parse_keyword): Rewrite.
1604 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1605 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1606 * cgen-opc.c: Clean up pass over `struct foo' usage.
1607 (cgen_keyword_lookup_value): Handle "" entry.
1608 (cgen_keyword_add): Likewise.
1609 start-sanitize-cygnus
1610 * Makefile.am: Add cgen support.
1611 * Makefile.in: Regenerate.
1612 * configure.in: Add cgen support.
1613 * configure: Regenerate.
1614 * aclocal.m4: Regenerate.
1615 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1618 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1620 * mips-opc.c: Add FP_D to s.d instruction flags.
1622 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1624 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1626 start-sanitize-tic80
1627 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1629 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1630 PC relative offset forms before the 15 bit forms. An assembler command
1631 line option now chooses the default.
1634 start-sanitize-r5900
1635 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1637 * mips-opc.c: Add many missing r5900 instructions.
1640 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1642 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1643 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1645 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1647 * configure: Only build libopcodes shared if --enable-shared's value
1648 was `yes', or was set to `*opcodes*'.
1649 * aclocal.m4: Likewise.
1650 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1651 original source of this bit of code. It's not clear what the best fix
1654 start-sanitize-r5900
1655 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1657 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1659 start-sanitize-tic80
1660 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1662 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1663 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1664 offset forms before the 15 bit forms, to default to the long forms.
1667 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1669 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1671 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1673 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1674 symbol if none is present.
1675 (print_insn_big_arm): Prevent examination of stored symbol if
1678 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1680 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1682 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1684 * disassemble.c: Remove disasm_symaddr() function.
1686 * arm-dis.c: Use info->symbol instead of info->flags to determine
1687 if disassmbly should be in Thumb or Arm mode.
1689 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1691 * arm-dis.c: Add support for disassembling Thumb opcodes.
1692 (print_insn_thumb): New function.
1694 * disassemble.c (disasm_symaddr): New function.
1696 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1697 (thumb_opcodes): Table of Thumb opcodes.
1699 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1701 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1703 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1704 and 'v' as operand types.
1706 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1708 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1709 <olivier.carmona@di.epfl.ch>.
1710 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1711 which has a two word opcode with a one word argument.
1713 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1715 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1716 unsigned, not signed.
1717 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1719 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1721 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1722 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1723 (ftrv): Slay the cut-and-paste monster.
1725 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1727 * d10v-dis.c (print_operand):
1728 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1730 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1732 * d10v-opc.c (OPERAND_FLAG): Split into:
1733 (OPERAND_FFLAG, OPERAND_CFLAG) .
1737 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1739 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1740 field for all INSN_MACRO's.
1741 * mips16-opc.c: same
1743 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1745 * mips-opc.c (sync,cache): These are 3900 insns.
1747 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1749 sh-opc.h (sh_table): Remove ftst/nan.
1751 start-sanitize-cygnus
1752 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1754 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1755 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1757 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1761 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1763 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1764 Add tx49 insns and configury.
1767 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1769 * mips-opc.c (ffc, ffs): Fix mask.
1771 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1773 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1776 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1778 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1779 start-sanitize-cygnus
1780 Added VR5400 instructions.
1781 (N5): New cpu-id macro.
1783 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1785 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1787 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1788 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1790 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1792 * v850-dis.c (disassemble): Replace // with /* ... */
1794 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1796 * sparc-opc.c: Add wr & rd for v9a asr's.
1797 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1798 (v9a_asr_reg_names): New variable.
1799 Patch from David Miller <davem@vger.rutgers.edu>.
1801 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1803 * sparc-opc.c (v9notv9a): New insn type.
1804 (IMPDEP): Move to the end to not conflict with edge8 et al.
1805 Patch from David Miller <davem@vger.rutgers.edu>.
1807 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1809 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1811 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1813 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1815 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1817 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1818 of disassemble_info structure to determine if an overlay address
1819 has a matching symbol in low memory.
1821 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1822 new symbol_at_address_func field in disassemble_info structure.
1824 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1826 * v850-opc.c (extract_d22): Use signed arithmatic.
1828 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1830 * mips-opc.c: Three op mult is not an ISA insn.
1832 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1834 * mips-opc.c: Fix formatting.
1836 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1838 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1839 than assuming that char is signed. Explicitly sign extend 16 bit
1840 values, rather than assuming that short is 16 bits.
1841 (OP_sI, OP_J, OP_DIR): Likewise.
1843 start-sanitize-v850e
1844 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1846 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1850 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1852 * v850-opc.c: Fix typo in comment.
1854 * v850-dis.c (disassemble): Add test of processor type when
1855 determining opcodes.
1857 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1859 * configure.in: Use a diversion to set enable_shared before the
1860 arguments are parsed.
1861 * configure: Rebuild.
1863 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1865 * m68k-opc.c (TBL1): Use ! rather than `.
1866 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1868 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1870 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1872 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1874 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1877 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1878 * aclocal.m4: Rebuild with new libtool.
1879 * configure: Rebuild.
1881 start-sanitize-v850e
1882 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1884 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1887 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1889 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1891 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1893 * v850-opc.c (v850_opcodes): Further rearrangements.
1895 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1897 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1899 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1901 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1904 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1906 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1908 * mips16-opc.c: Added mips16 sdbbp.
1911 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1913 * v850-opc.c: Initialise processors field of v850_opcode structure.
1915 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1917 Merge changes from Martin Hunt:
1919 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1921 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1922 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1923 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1925 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1927 * d30v-dis.c (print_insn): First operand of d*i (delayed
1928 branch) instructions is relative.
1930 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1931 (d30v_operand_table): Add IMM6S3 type.
1932 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1934 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1935 and cmp instructions.
1937 * d30v-opc.c: Correct entries for repeat*, and sat*.
1938 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1939 types. Correct several formats.
1941 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1943 * d30v-opc.c (pre_defined_registers): Change control registers.
1945 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1946 SHORT_C2. Manual was incorrect.
1948 * d30v-dis.c (lookup_opcode): Return value now indicates
1949 if an opcode has a short and a long form. Used for deciding
1950 to append a ".s" or ".l".
1951 (print_insn): Append a ".s" to an instruction if it is
1952 the short form and ".l" if it is a long form. Do not append
1953 anything if the instruction has only one possible size.
1955 * d30v-opc.c: Change mulx2h to require an even register.
1956 New form: SHORT_A2; a SHORT_A form that needs an even
1957 register as the first operand.
1959 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1960 instruction was not being disassembled if there were an odd
1961 number of instructions.
1963 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1965 start-sanitize-v850e
1966 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1968 * v850-dis.c (disassemble): Improved display of register lists.
1971 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1973 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1974 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1975 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1976 fandnot1s, fandnot2s.
1978 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1980 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1982 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1984 * cgen-asm.c (cgen_parse_address): New argument resultp.
1985 All callers updated.
1986 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1988 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1990 * mn10200-dis.c (disassemble): PC relative instructions are
1991 relative to the next instruction, not the current instruction.
1993 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1995 * v850-dis.c (disassemble): Only signed extend values that are not
1996 returned by extract functions.
1997 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1999 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2001 * v850-opc.c: Update comments. Remove use of
2002 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2004 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2006 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2008 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2010 * configure: Rebuilt with latest devo autoconf for NT support.
2012 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2014 * v850-dis.c (disassemble): Use curly brace syntax for register
2017 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2018 where r0 is being used as a destination register.
2020 start-sanitize-v850e
2021 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2023 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2026 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2028 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2029 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2030 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2031 Add insns to access SGR and DBR.
2032 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2034 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2036 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2038 start-sanitize-v850e
2039 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2041 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2042 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2045 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2047 * configure (cgen_files): Add support for v850e target.
2048 * configure.in (cgen_files): Add support for v850e target.
2050 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2052 * configure (cgen_files): Add support for v850ea target.
2053 * configure.in (cgen_files): Add support for v850ea target.
2056 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2058 * configure.in (bfd_arc_arch): Add.
2059 * configure: Rebuild.
2060 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2061 * Makefile.in: Rebuild.
2062 * arc-dis.c, arc-opc.c: New files.
2063 * disassemble.c (ARCH_all): Define ARCH_arc.
2064 (disassembler): Add ARC support.
2066 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2068 start-sanitize-v850e
2069 * v850-dis.c (disassemble): Add support for v850EA instructions.
2071 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2072 (v850_opcodes): Add v850EA instructions.
2074 * v850-dis.c (disassemble): Add support for v850E instructions.
2076 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2077 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2078 insert_spe, extract_spe): New Functions.
2079 (v850_opcodes): Add v850E instructions.
2082 * v850-opc.c: Reorganised and re-layed out to improve readability
2085 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2087 * configure: Rebuild with autoconf 2.12.1.
2089 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2091 * aclocal.m4, configure: Rebuild with new automake patches.
2093 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2095 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2096 * acinclude.m4: Just include acinclude.m4 from BFD.
2097 * aclocal.m4, configure: Rebuild.
2099 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2101 * Makefile.am: New file, based on old Makefile.in.
2102 * acconfig.h: New file.
2103 * acinclude.m4: New file.
2104 * stamp-h.in: New file.
2105 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2106 Removed shared library handling; now handled by libtool. Replace
2107 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2108 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2109 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2110 handling in AC_OUTPUT.
2111 * dep-in.sed: Change .o to .lo.
2112 * Makefile.in: Now built with automake.
2113 * aclocal.m4: Now built with aclocal.
2114 * config.in, configure: Rebuild.
2116 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2118 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2120 start-sanitize-r5900
2121 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2123 * mips-opc.c: Fix coding of mtsa.
2126 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2128 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2130 * sparc-dis.c (sorted_opcodes): New static local.
2131 (struct opcode_hash): `opcode' is pointer to const element.
2132 (build_hash): First arg is now table of sorted pointers.
2133 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2134 (compare_opcodes): Update.
2136 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2138 * cgen-opc.c: #include <ctype.h>.
2139 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2140 Handle case insensitive hashing.
2141 (hash_keyword_value): Change type of `value' to unsigned int.
2143 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2145 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2146 precision FP, mark it as such. Likewise for double precision
2147 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2149 start-sanitize-r5900
2150 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2153 start-sanitize-r5900
2154 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2156 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2157 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2160 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2162 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2164 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2165 nesting depth when all the macros are expanded.
2167 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2169 * sparc-opc.c: The fcmp v9a instructions take an integer register
2170 as a destination, not a floating point register. From Christian
2171 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2173 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2175 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2176 syntax. From Roman Hodek
2177 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2179 * i386-dis.c (twobyte_has_modrm): Fix pand.
2181 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2183 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2185 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2187 * arm-dis.c: Add prototypes for arm_decode_shift and
2190 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2192 * mips-opc.c: Add r3900 insns.
2194 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2196 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2197 print delay slot instructions on the same line. When using a PC
2198 relative load, add a comment with the value being loaded if it can
2201 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2203 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2204 to pushS/popS for segment regs and byte constant so that
2205 pushw/popw printed when in 16 bit data mode.
2207 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2208 print cbtw, cwtd in 16 bit data mode.
2209 * i386-dis.c (putop): extra case W to support above.
2211 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2212 address size prefix in 16 bit address mode.
2214 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2216 * sh-dis.c: Reindent. Rename local variable fprintf to
2219 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2221 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2223 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2225 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2227 * mips16-opc.c (mip16_opcodes): same.
2229 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2231 * m68k-opc.c (moveb): Change $d to %d.
2233 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2235 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2236 (twobyte_has_modrm): Likewise.
2238 (OP_MMX, OP_EM, OP_MS): New static functions.
2240 * i386-dis.c: Revert patch of April 4. The output now matches
2243 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2245 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2248 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2250 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2252 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2254 * Makefile.in (install): Depend upon installdirs.
2255 (installdirs): New target.
2257 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2259 From Thomas Graichen <graichen@rzpd.de>:
2260 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2261 * configure: Rebuild.
2263 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2265 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2266 Delete string{,s}.h support.
2268 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2270 * cgen-asm.c (cgen_parse_operand_fn): New global.
2271 (cgen_parse_{{,un}signed_integer,address}): Update call to
2272 cgen_parse_operand_fn.
2273 (cgen_init_parse_operand): New function.
2274 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2275 from cgen_asm_init_parse.
2276 (m32r_cgen_assemble_insn): New operand `errmsg'.
2277 Delete call to as_bad, return error message to caller.
2278 (m32r_cgen_asm_hash_keywords): #if 0 out.
2280 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2282 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2284 [case 'J']: Fix typo in register name.
2286 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2288 * configure.in: Substitute SHLIB_LIBS.
2289 * configure: Rebuild.
2290 * Makefile.in (SHLIB_LIBS): New variable.
2291 ($(SHLIB)): Use $(SHLIB_LIBS).
2293 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2295 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2297 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2299 * disassemble.c (disassembler): Handle m32r.
2301 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2303 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2304 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2305 * Makefile.in (CFILES): Add them.
2306 (ALL_MACHINES): Add them.
2307 (dependencies): Regenerate.
2308 * configure.in (cgen_files): New variable.
2309 (bfd_m32r_arch): Add entry.
2310 * configure: Regenerate.
2312 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2314 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2315 * configure: Rebuild.
2317 * Makefile.in: Rebuild dependencies.
2319 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2321 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2324 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2326 * Branched binutils 2.8.
2328 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2330 * m10200-dis.c: Rename from mn10200-dis.c.
2331 * m10200-opc.c: Rename from mn10200-opc.c.
2332 * m10300-dis.c: Rename from mn10300-dis.c
2333 * m10300-opc.c: Rename from mn10300-opc.c.
2334 * Makefile.in: Update accordingly.
2336 * mips16-opc.c: Add mul and dmul macros.
2338 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2340 * makefile.vms: Update CFLAGS, add clean target.
2342 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2344 * mips-opc.c: Add "wait". From Ralf Baechle
2345 <ralf@gnu.ai.mit.edu>.
2347 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2348 * configure, config.in: Rebuild.
2349 * sysdep.h: Include <stdlib.h> if it exists.
2350 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2352 * Makefile.in: Rebuild dependencies.
2354 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2356 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2357 Andrew Bray <andy@madhouse.demon.co.uk>.
2359 * mips-opc.c: Add cast when setting mips_opcodes.
2361 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2363 * v850-dis.c (disassemble): Fix sign extension problem.
2364 * v850-opc.c (extract_d*): Fix sign extension problems to make
2365 disassembly calculate branch offsets correctly.
2367 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2369 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2371 * mips-opc.c: Add dctr and dctw.
2373 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2375 * d30v-dis.c (print_insn): Change the way signed constants
2378 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2380 * Makefile.in (BFD_H): New variable.
2381 (HFILES): New variable.
2382 (CFILES): Add all C files.
2383 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2384 Delete old dependencies, and build new ones.
2385 * dep-in.sed: New file.
2387 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2389 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2391 start-sanitize-coldfire
2392 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2394 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2397 end-sanitize-coldfire
2398 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2400 * mn10200-opc.c: Change "trap" to "syscall".
2401 * mn10300-opc.c: Add new "syscall" instruction.
2403 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2405 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2406 mulul insns on the coldfire.
2408 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2410 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2411 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2412 (print_insn_little_arm): Likewise.
2414 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2416 Based on patches from H.J. Lu <hjl@lucon.org>:
2417 * i386-dis.c (fetch_data): Add prototype.
2418 * m68k-dis.c (fetch_data): Add prototype.
2419 (dummy_print_address): Add prototype. Make static.
2420 * ppc-opc.c (valid_bo): Add prototype.
2421 * sparc-dis.c (build_hash_table): Add prototype.
2422 (is_delayed_branch, compute_arch_mask): Add prototypes.
2423 (print_insn_sparc): Make several local variables const.
2424 (compare_opcodes): Change arguments to const PTR. Add prototype.
2425 * sparc-opc.c (arg): Change name field to be const.
2426 (lookup_name, lookup_value): Add prototypes. Change table and
2427 name parameters to be const.
2428 (sparc_encode_asi): Change name parameter to be const.
2429 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2430 (sparc_encode_sparclet_cpreg): Likewise.
2431 (sparc_decode_asi): Change return type to be const.
2432 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2433 (sparc_decode_sparclet_cpreg): Likewise.
2435 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2437 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2438 Solaris doesn't like the combined options, and the -f is
2440 (stamp-tshlink, install): Likewise.
2442 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2444 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2447 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2449 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2451 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2453 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2456 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2458 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2460 start-sanitize-tic80
2461 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2463 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2465 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2467 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2470 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2472 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2473 floatformat_to_double to make portable.
2474 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2477 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2479 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2480 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2482 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2484 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2485 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2487 start-sanitize-tic80
2488 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2490 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2491 (OFF_SL_BR_SCALED): ... to this, and added the flag
2492 TIC80_OPERAND_BASEREL to the flags word.
2493 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2497 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2499 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2500 Change mips_opcodes from const array to a pointer,
2501 and change bfd_mips_num_opcodes from const int to int,
2502 so that we can increase the size of the mips opcodes table
2505 start-sanitize-tic80
2506 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2508 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2509 store BITNUM values in the table in one's complement form
2510 to match behavior when assembler is given a raw numeric
2511 value for a BITNUM operand.
2512 * tic80-dis.c (print_operand_bitnum): Ditto.
2515 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2517 * d30v-opc.c: Removed references to FLAG_X.
2519 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2521 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2523 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2525 * Makefile.in: Added d30v object files.
2526 * configure: (bfd_d30v_arch) Rebuilt.
2527 * configure.in: (bfd_d30v_arch) Added new case.
2528 * d30v-dis.c: New file.
2529 * d30v-opc.c: New file.
2530 * disassemble.c (disassembler) Add entry for d30v.
2532 start-sanitize-tic80
2533 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2535 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2536 representations for the floating point BITNUM values.
2538 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2540 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2541 in the table in one's complement form, as they appear in the
2543 (tic80_symbol_to_value): Use macros to access predefined
2545 (tic80_value_to_symbol): Ditto.
2546 (tic80_next_predefined_symbol): New function.
2547 * tic80-dis.c (print_operand_bitnum): Remove code that did
2548 one's complement for BITNUM values.
2551 start-sanitize-r5900
2552 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2554 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2557 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2559 * makefile.vms: Remove 8 bit characters. Update to latest
2562 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2564 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2566 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2568 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2569 (IMM24_PCREL): Likewise.
2571 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2573 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2574 address for an extended PC relative instruction that is not a
2577 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2579 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2582 start-sanitize-tic80
2583 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2585 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2586 (tic80_opcodes): Sort entries so that long immediate forms
2587 come after short immediate forms, making it easier for
2588 assembler to select the right one for a given operand.
2591 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2593 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2595 (print_insn_mips16): Likewise.
2597 start-sanitize-r5900
2598 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2600 * mips-opc.c: add r5900.
2603 start-sanitize-tic80
2604 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2606 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2607 a symbol class that restricts translation to just that
2608 class (general register, condition code, etc).
2610 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2612 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2613 and REG_DEST_E for register operands that have to be
2614 an even numbered register. Add REG_FPA for operands that
2615 are one of the floating point accumulator registers.
2616 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2617 (tic80_opcodes): Change entries that need even numbered
2618 register operands to use the new operand table entries.
2619 Add "or" entries that are identical to "or.tt" entries.
2622 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2624 * mips16-opc.c: Add new cases of exit instruction for
2626 * mips-dis.c (print_mips16_insn_arg): Display floating point
2627 registers in operands of exit instruction. Print `$' before
2628 register names in operands of entry and exit instructions.
2630 start-sanitize-tic80
2631 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2633 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2634 pairs for all predefined symbols recognized by the assembler.
2635 Also used by the disassembling routines.
2636 (tic80_symbol_to_value): New function.
2637 (tic80_value_to_symbol): New function.
2638 * tic80-dis.c (print_operand_control_register,
2639 print_operand_condition_code, print_operand_bitnum):
2640 Remove private tables and use tic80_value_to_symbol function.
2643 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2645 * d10v-dis.c (print_operand): Change address printing
2646 to correctly handle PC wrapping. Fixes PR11490.
2648 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2650 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2653 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2655 * mips-dis.c (print_insn_mips16): Set insn_info information.
2656 (print_mips16_insn_arg): Likewise.
2658 * mips-dis.c (print_insn_mips16): Better handling of an extend
2659 opcode followed by an instruction which can not be extended.
2661 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2663 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2664 coldfire moveb instruction to not allow an address register as
2665 destination. Although the documentation does not indicate that
2666 this is invalid, experiments uncovered unexpected behavior.
2667 Added a comment explaining the situation. Thanks to Andreas
2668 Schwab for pointing this out to me.
2670 start-sanitize-tic80
2671 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2673 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2674 entries are presorted so that entries with the same mnemonic are
2675 adjacent to each other in the table. Sort the entries for each
2676 instruction so that this is true.
2679 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2681 * m68k-dis.c: Include <libiberty.h>.
2682 (print_insn_m68k): Sort the opcode table on the most significant
2683 nibble of the opcode.
2685 start-sanitize-tic80
2686 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2688 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2689 "vsub", "vst", "xnor", and "xor" instructions.
2690 (V_a1): Renamed from V_a, msb of accumulator reg number.
2691 (V_a0): Add macro, lsb of accumulator reg number.
2693 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2695 * tic80-dis.c (print_insn_tic80): Broke excessively long
2696 function up into several smaller ones and arranged for
2697 the instruction printing function to be callable recursively
2698 to print vector instructions that have both a load and a
2699 math instruction packed into a single opcode.
2700 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2701 to explain why it comes after the other vector opcodes.
2704 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2706 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2707 move insns to handle immediate operands.
2709 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2711 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2712 fix operand mask in the "moveml" entries for the coldfire.
2714 start-sanitize-tic80
2715 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2717 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2718 New macros for building vector instruction opcodes.
2719 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2720 FMT_LI, which were unused. The field is now a flags field.
2721 Remove some opcodes that are possible, but illegal, such
2722 as long immediate instructions with doubles for immediate
2723 values. Add "vadd" and "vld" instructions.
2725 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2727 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2728 the order more logical. Move the shift alias instructions ("rotl",
2729 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2730 interspersed with the regular sr.x and sl.x instructions. Add
2731 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2732 "sub", "subu", "swcr", and "trap".
2734 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2736 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2737 (OFF_SL_PC): Renamed from OFF_SL.
2738 (OFF_SS_BR): New operand type for base relative operand.
2739 (OFF_SL_BR): New operand type for base relative operand.
2740 (REG_BASE): New operand type for base register operand.
2741 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2742 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2743 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2745 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2746 10 char field, padded with spaces on rhs, rather than a string
2747 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2748 than old TIC80_OPERAND_RELATIVE. Add support for new
2749 TIC80_OPERAND_BASEREL flag bit.
2751 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2753 * tic80-dis.c (print_insn_tic80): Print floating point operands
2755 * tic80-opc.c (SPFI): Add single precision floating point
2756 immediate operand type.
2757 (ROTATE): Add rotate operand type for shifts.
2758 (ENDMASK): Add for shifts.
2759 (n): Macro for the 'n' bit.
2760 (i): Macro for the 'i' bit.
2761 (PD): Macro for the 'PD' field.
2762 (P2): Macro for the 'P2' field.
2763 (P1): Macro for the 'P1' field.
2764 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2768 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2770 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2771 adding in current address for pc-relative operands.
2773 start-sanitize-tic80
2774 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2776 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2777 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2778 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2779 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2780 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2781 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2782 (REG_SCALED, LSI_SCALED): New operand types.
2783 (E): New macro for 'E' bit at bit 27.
2784 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2785 opcodes, including the various size flavors (b,h,w,d) for
2786 the direct load and store instructions.
2788 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2790 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2792 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2793 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2794 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2795 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2796 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2797 masks with "MASK_* & ~M_*" to get the M bit reset.
2798 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2800 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2802 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2803 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2804 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2806 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2807 CC, SICR, and LICR table entries.
2808 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2809 "bcnd", and "brcr" opcodes.
2812 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2814 * ppc-opc.c (powerpc_operands): Make comment match the
2815 actual fields (no shift field).
2816 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2817 start-sanitize-tic80
2818 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2819 partial implementation, work in progress.
2820 * tic80-opc.c (tic80_operands): Begin construction operands table.
2821 (tic80_opcodes): Continue populating opcodes table and start
2822 filling in the operand indices.
2823 (tic80_num_opcodes): Add this.
2826 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2828 * m68k-opc.c: Add #B case for moveq.
2830 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2832 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2833 before they are used.
2835 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2837 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2838 for "breakpoint" instruction.
2840 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2842 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2843 (dep): Use ALL_CFLAGS rather than CFLAGS.
2845 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2847 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2850 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2852 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2853 start-sanitize-tic80
2854 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2857 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2859 * mips16-opc.c: Add "abs".
2861 start-sanitize-tic80
2862 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2864 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2865 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2866 (disassembler): Add bfd_arch_tic80 support to set disassemble
2867 to print_insn_tic80.
2868 * tic80-dis.c (print_insn_tic80): Add stub.
2870 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2872 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2873 * configure: Regenerate with autoconf.
2874 * tic80-dis.c: Add file.
2875 * tic80-opc.c: Add file.
2878 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2880 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2882 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2884 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2885 (mn10200_opcodes): Use it for some logicals and btst insns.
2886 Add "break" and "trap" instructions.
2888 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2890 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2892 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2894 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2895 relative load or add now depends upon whether the instruction is
2898 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2900 * mn10200-dis.c: Finish writing disassembler.
2901 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2902 Fix mask for "jmp (an)".
2904 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2905 handle endianness issues for mn10300.
2907 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2909 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2911 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2912 instruction. Fix opcode field for "movb (imm24),dn".
2914 * mn10200-opc.c (mn10200_operands): Fix insertion position
2917 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2919 * mn10200-opc.c: Create mn10200 opcode table.
2920 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2921 but moving along nicely.
2923 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2925 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2927 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2929 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2930 specifiers for fmovem* instructions.
2932 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2934 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2936 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2938 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2941 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2943 * mn10300-opc.c: Add some comments explaining the various
2946 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2948 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2950 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2953 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2954 operand specifiers in fmovm* instructions.
2956 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2958 * ppc-opc.c (insert_li): Give an error if the offset has the two
2959 least significant bits set.
2961 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2963 * mips-dis.c (print_insn_mips16): Separate the instruction from
2964 the arguments with a tab, not a space.
2966 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2968 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2971 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2974 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2976 * configure: Rebuild with autoconf 2.12.
2978 Add support for mips16 (16 bit MIPS implementation):
2979 * mips16-opc.c: New file.
2980 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2981 (mips16_reg_names): New static array.
2982 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2983 after seeing a 16 bit symbol.
2984 (print_insn_little_mips): Likewise.
2985 (print_insn_mips16): New static function.
2986 (print_mips16_insn_arg): New static function.
2987 * mips-opc.c: Add jalx instruction.
2988 * Makefile.in (mips16-opc.o): New target.
2989 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2990 * configure: Rebuild.
2992 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2994 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2995 operand specifiers in *save, *restore and movem* instructions.
2997 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3000 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3001 register operands for immediate arithmetic, not, neg, negx, and
3002 set according to condition instructions.
3004 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3005 specifier of the effective-address operand in immediate forms of
3006 arithmetic instructions. The specifier for the immediate operand
3007 notes how and where the constant will be stored.
3009 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3011 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3014 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3017 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3019 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3021 * mn10300-dis.c (disassemble): Handle register lists.
3023 * mn10300-opc.c: Fix handling of register list operand for
3024 "call", "ret", and "rets" instructions.
3026 * mn10300-dis.c (disassemble): Print PC-relative and memory
3027 addresses symbolically if possible.
3028 * mn10300-opc.c: Distinguish between absolute memory addresses,
3029 pc-relative offsets & random immediates.
3031 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3033 (disassemble): Handle SPLIT and EXTENDED operands.
3035 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3037 * mn10300-dis.c: Rough cut at printing some operands.
3039 * mn10300-dis.c: Start working on disassembler support.
3040 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3042 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3044 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3046 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3048 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3050 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3052 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3053 register argument is calls and jmp instructions.
3055 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3057 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3058 getx operand. Fix opcode for mulqu imm,dn.
3060 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3062 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3063 in MN10300_OPERAND_SPLIT operands for how many bits
3064 appear in the basic insn word. Add IMM32_HIGH24,
3065 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3066 (mn10300_opcodes): Use new operands as needed.
3068 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3069 for bset, bclr, btst instructions.
3070 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3072 * mn10300-opc.c (mn10300_operands): Remove many redundant
3073 operands. Update opcode table as appropriate.
3074 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3075 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3077 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3079 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3080 operands (for indexed load/stores). Fix bitpos for DI
3081 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3082 few instructions that insert immediates/displacements in the
3083 middle of the instruction. Add IMM8E for 8 bit immediate in
3084 the extended part of an instruction.
3085 (mn10300_operands): Use new opcodes as appropriate.
3087 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3089 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3090 sequential so the assembler never parallelizes it with
3093 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3095 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3096 a data/address register that appears in register field 0
3097 and register field 1.
3098 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3100 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3102 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3103 standard disassembly.
3105 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3106 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3107 Recategorize PALcode instructions.
3109 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3111 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3113 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3115 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3116 there are no operand types.
3118 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3120 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3122 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3124 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3126 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3128 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3130 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3131 and sst.w instructions.
3133 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3136 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3138 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3141 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3143 * ppc-opc.c (PPCPWR2): Define.
3144 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3147 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3149 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3150 field for movhu instruction.
3152 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3153 cast value to "long" not "signed long" to keep hpux10
3156 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3158 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3161 * mn10300-opc.c (FMT*): Remove definitions.
3163 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3164 for shift-by-register opcodes.
3166 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3167 into [AD][MN][01] for encoding the position of the register
3170 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3172 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3173 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3175 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3177 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3178 Fix various typos. Add "PAREN" operand.
3179 (MEM, MEM2): Define.
3180 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3181 operands. Fix several typos.
3183 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3186 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3188 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3189 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3191 (mn10300_opcodes): Break opcode format out into its own field.
3192 Update many operand fields to deal with signed vs unsigned
3193 issues. Fix one or two typos in the "mov" instruction
3194 opcode, mask and/or operand fields.
3196 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3198 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3199 m68851 wasn't reset.
3201 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3203 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3204 all opcodes. Very rough cut at operands for all opcodes.
3206 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3209 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3211 * mn10200-opc.c, mn10300-opc.c: New files.
3212 * mn10200-dis.c, mn10300-dis.c: New files.
3213 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3214 * disassemble.c: Break mn10x00 support into 10200 and 10300
3216 * configure.in: Likewise.
3217 * configure: Rebuilt.
3219 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3221 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3223 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3225 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3227 * disassemble (ARCH_mn10x00): Define.
3228 (disassembler): Handle bfd_arch_mn10x00.
3229 * configure.in: Recognize bfd_mn10x00_arch.
3230 * configure: Rebuilt.
3232 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3234 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3235 accordingly. Don't declare functions using op_rtn.
3237 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3239 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3240 params to be more standard.
3241 * (disassemble): Print absolute addresses and symbolic names for
3242 branch and jump targets.
3243 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3245 * (v850_opcodes): Add breakpoint insn.
3247 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3249 * m68k-opc.c: Move the fmovemx data register cases before the
3250 other cases, so that they get recognized before the data register
3251 does gets treated as a degenerate register list.
3253 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3255 * mips-opc.c: Add a case for "div" and "divu" with two registers
3256 and a destination of $0.
3258 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3260 * mips-dis.c (print_insn_arg): Add prototype.
3261 (_print_insn_mips): Ditto.
3263 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3265 * mips-dis.c (print_insn_arg): Print condition code registers as
3268 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3270 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3272 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3274 * v850-dis.c (disassemble): Make static. Provide prototype.
3276 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3278 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3281 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3283 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3284 ']' characters into the output stream.
3285 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3286 Add "memop" field to all opcodes (for the disassembler).
3287 Reorder opcodes so that "nop" comes before "mov" and "jr"
3288 comes before "jarl".
3290 * v850-dis.c (print_insn_v850): Fix typo in last change.
3292 * v850-dis.c (print_insn_v850): Properly handle disassembling
3293 a two byte insn at the end of a memory region when the memory
3294 region's size is only two byte aligned.
3296 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3298 * v850-dis.c (v850_reg_names): Define.
3299 (v850_sreg_names, v850_cc_names): Likewise.
3300 (disassemble): Very rough cut at printing operands (unformatted).
3302 * v850-opc.c (BOP_MASK): Fix.
3303 (v850_opcodes): Fix mask for jarl and jr.
3305 * v850-dis.c: New file. Skeleton for disassembler support.
3306 * Makefile.in Remove v850 references, they're not needed here.
3307 * configure.in: Add v850-dis.o when building v850 toolchains.
3308 * configure: Rebuilt.
3309 * disassemble.c (disassembler): Call v850 disassembler.
3311 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3312 (insert_d8_6, extract_d8_6): New functions.
3313 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3314 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3316 (IF4A, IF4B): Use "D7" instead of "D7S".
3317 (IF4C, IF4D): Use "D8_7" instead of "D8".
3318 (IF4E, IF4F): New. Use "D8_6".
3319 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3320 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3322 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3323 (v850_operands): Change D16 to D16_15, use special insert/extract
3324 routines. New new D16 that uses the generic insert/extract code.
3325 (IF7A, IF7B): Use D16_15.
3326 (IF7C, IF7D): New. Use D16.
3327 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3329 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3330 message. Issue an error if the branch offset is odd.
3332 * v850-opc.c: Add notes about needing special insert/extract
3333 for all the load/store insns, except "ld.b" and "st.b".
3335 * v850-opc.c (insert_d22, extract_d22): New functions.
3336 (v850_operands): Use insert_d22 and extract_d22 for
3338 (insert_d9): Fix range check.
3340 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3342 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3343 and set bits field to D9 and D22 operands.
3345 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3347 * v850-opc.c (v850_operands): Define SR2 operand.
3348 (v850_opcodes): "ldsr" uses R1,SR2.
3350 * v850-opc.c (v850_opcodes): Fix opcode specs for
3351 sld.w, sst.b, sst.h, sst.w, and nop.
3353 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3355 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3356 end of the opcode table.
3358 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3360 * d10v-opc.c (pre_defined_registers): Added register pairs,
3361 "r0-r1", "r2-r3", etc.
3363 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3365 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3366 Create I16U for an unsigned 16bit mmediate operand.
3367 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3369 * v850-opc.c (v850_operands): Define EP operand.
3370 (IF4A, IF4B, IF4C, IF4D): Use EP.
3372 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3373 with immediate operand, "movhi". Tweak "ldsr".
3375 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3376 correct. Get sld.[bhw] and sst.[bhw] closer.
3378 * v850-opc.c (v850_operands): "not" is a two byte insn
3380 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3382 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3384 * v850-opc.c (two): Get order of words correct.
3386 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3388 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3389 register source and destination operands.
3390 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3392 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3393 same thinko in "trap" opcode.
3395 * v850-opc.c (v850_opcodes): Add initializer for size field
3398 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3399 Add D8 for 8-bit unsigned field in short load/store insns.
3400 (IF4A, IF4D): These both need two registers.
3401 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3402 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3403 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3404 for "ldsr" and "stsr".
3405 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3408 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3409 short store word (sst.w).
3411 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3413 * v850-opc.c (v850_operands): Added insert and extract fields,
3414 pointers to functions that handle unusual operand encodings.
3416 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3418 * v850-opc.c (v850_opcodes): Enable "trap".
3420 * v850-opc.c (v850_opcodes): Fix order of displacement
3421 and register for "set1", "clr1", "not1", and "tst1".
3423 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3425 * v850-opc.c (v850_operands): Add "B3" support.
3426 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3429 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3431 * v850-opc.c: Close unterminated comment.
3433 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3435 * v850-opc.c (v850_operands): Add flags field.
3436 (v850_opcodes): add move opcodes.
3438 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3440 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3441 * configure: (bfd_v850v_arch) Add new case.
3442 * configure.in: (bfd_v850_arch) Add new case.
3443 * v850-opc.c: New file.
3445 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3447 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3449 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3451 * d10v-opc.c: Add additional information to the opcode
3452 table to help determinine which instructions can be done
3455 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3457 * mpw-make.sed: Update editing of include pathnames to be
3460 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3462 * arm-opc.h: Added "bx" instruction definition.
3464 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3466 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3468 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3470 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3472 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3474 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3476 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3478 * makefile.vms: Update for alpha-opc changes.
3480 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3482 * i386-dis.c (print_insn_i386): Actually return the correct value.
3483 (ONE, OP_ONE): #ifdef out; not used.
3485 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3487 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3488 Changed subi operand type to treat 0 as 16.
3490 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3492 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3495 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3497 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3498 memory transfer instructions. Add new format string entries %h and %s.
3499 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3502 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3504 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3505 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3507 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3509 * alpha-dis.c (print_insn_alpha_osf): Remove.
3510 (print_insn_alpha_vms): Remove.
3511 (print_insn_alpha): Make globally visible. Chose the register
3512 names based on info->flavour.
3513 * disassemble.c: Always return print_insn_alpha for the alpha.
3515 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3517 * d10v-dis.c (dis_long): Handle unknown opcodes.
3519 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3521 * d10v-opc.c: Changes to support signed and unsigned numbers.
3522 All instructions with the same name that have long and short forms
3523 now end in ".l" or ".s". Divs added.
3524 * d10v-dis.c: Changes to support signed and unsigned numbers.
3526 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3528 * d10v-dis.c: Change all functions to use info->print_address_func.
3530 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3532 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3533 move ccr/sr insns more strict so that the disassembler only
3534 selects them when the addressing mode is data register.
3536 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3537 * d10v-opc.c (pre_defined_registers): Declare.
3538 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3539 to pick a better name for the registers.
3541 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3543 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3544 operands for fexpand and fpmerge. From Christian Kuehnke
3545 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3547 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3549 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3550 print routine. Take new regnames and cpumask arguments.
3551 Kill the environment variable nonsense.
3552 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3553 (print_insn_alpha_vms): New function. Do VMS style regnames.
3554 * disassemble.c (disassembler): Test bfd flavour to pick
3555 between OSF and VMS routines. Default to OSF.
3557 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3559 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3560 * configure: Rebuild.
3561 * Makefile.in (install): Use @INSTALL_SHLIB@.
3563 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3565 * configure: (bfd_d10v_arch) Add new case.
3566 * configure.in: (bfd_d10v_arch) Add new case.
3567 * d10v-dis.c: New file.
3568 * d10v-opc.c: New file.
3569 * disassemble.c (disassembler) Add entry for d10v.
3571 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3573 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3574 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3576 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3578 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3579 distinguish between variants of the instruction set.
3580 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3581 distinguish between variants of the instruction set.
3583 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3585 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3586 the 8086 instruction set.
3587 * i386-dis.c: General cleanups. Make most things static. Add
3588 prototypes. Get rid of static variables aflags and dflags. Pass
3589 them as args (to almost everything).
3591 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3593 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3595 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3597 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3598 if the next arg is marked with SRC_IN_DST. Gross.
3600 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3601 we're looking for and find EXR.
3603 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3604 if we're looking for KBIT and we don't find it.
3606 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3609 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3610 3bit immediate operands.
3612 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3614 * Released binutils 2.7.
3616 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3617 <kkaempf@progis.ac-net.de>.
3619 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3621 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3623 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3625 * sparc-dis.c (print_insn_sparclite): New routine to print
3626 sparclite instructions.
3628 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3630 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3632 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3634 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3635 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3636 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3638 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3640 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3641 Use autoconf-set values.
3642 (docdir, oldincludedir): Removed.
3643 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3645 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3647 * alpha-opc.c: New file.
3648 * alpha-opc.h: Remove.
3649 * alpha-dis.c: Complete rewrite to use new opcode table.
3650 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3651 * configure: Rebuild with autoconf 2.10.
3652 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3653 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3655 (alpha-opc.o): New target.
3657 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3659 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3660 Set imm_added_to_rs1 even if the source and destination register
3663 * sparc-opc.c: Add some two operand forms of the wr instruction.
3665 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3667 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3670 * disassemble.c (disassembler): Handle H8/S.
3671 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3673 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3675 * sparc-opc.c: Add beq/teq as aliases for be/te.
3677 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3678 <sergei@msil.sps.mot.com>.
3680 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3682 * makefile.vms: New file.
3684 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3686 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3688 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3691 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3693 * i386-dis.c (OP_OFF): Call append_prefix.
3695 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3697 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3698 unsigned long to silence a warning from the Solaris PowerPC
3701 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3703 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3705 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3707 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3709 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3710 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3711 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3712 cpush, cpusha, cpull sparclet insns.
3714 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3716 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3718 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3720 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3721 Set F_FLOAT on other floating point instructions.
3723 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3725 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3727 (powerpc_opcodes): Add 860/821 specific SPRs.
3729 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3731 * configure.in: Permit --enable-shared to specify a list of
3732 directories. Set and substitute BFD_PICLIST.
3733 * configure: Rebuild.
3734 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3735 uses. Set to @BFD_PICLIST@.
3737 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3739 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3740 not "abs", which may be needed for the absolute in something
3741 like btst #0,@10:8. Print L_3 immediates separately from other
3742 immediates. Change ABSMOV reference to ABS8MEM.
3744 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3746 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3747 (current_arch_mask): New static global.
3748 (compute_arch_mask): New static function.
3749 (print_insn_sparc): Delete sparc_v9_p. New static local
3750 current_mach. Resort opcode table if current_mach changes.
3751 Generalize "insn not supported" test.
3752 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3753 Delete test for v9/!v9.
3754 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3756 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3757 (brfcx): Renamed to FBRX.
3758 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3759 coprocessor mnemonics are not supported on the sparclet).
3760 (condf): Renamed to CONDF.
3761 (SLCBCC2): Delete F_ALIAS flag.
3763 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3765 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3766 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3768 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3770 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3771 that the shared library version number is set correctly.
3773 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3775 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3776 Miles Bader <miles@gnu.ai.mit.edu>.
3777 * configure: Rebuild.
3779 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3781 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3784 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3786 * configure: Rebuild with autoconf 2.8.
3788 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3790 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3791 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3793 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3795 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3796 since they appear as targets in Makefile.in.
3797 * configure: Rebuild.
3799 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3801 * mpw-make.sed: Edit out shared library support bits.
3803 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3805 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3806 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3807 (sparc_opcodes): Add sparclet insns.
3808 (sparclet_cpreg_table): New static local.
3809 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3810 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3812 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3814 * i386-dis.c (index16): New static variable.
3815 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3817 (OP_indirE): Return result of OP_E.
3818 (OP_E): Check for 16 bit addressing mode, and disassemble
3819 correctly. Optimised 32 bit case a little. Don't print
3820 "(base,index,scale)" when sib specifies only an offset.
3822 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3824 * configure.in: Set and substitute SHLIB_DEP.
3825 * configure: Rebuild.
3826 * Makefile.in (SHLIB_DEP): New variable.
3827 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3828 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3829 COMMON_SHLIB, add them to piclist with appropriate modifications.
3830 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3831 here: just use piclist.
3833 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3835 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3836 (print_insn_sparc): Rewrite v9/not-v9 tests.
3837 (compare_opcodes): Likewise.
3838 * sparc-opc.c (MASK_<ARCH>): Define.
3839 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3840 (sparclet,v6notv9): Define.
3841 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3842 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3844 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3846 * configure.in: Call AC_PROG_CC before configure.host.
3847 * configure: Rebuild.
3849 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3851 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3853 * i386-dis.c (onebyte_has_modrm): New static array.
3854 (twobyte_has_modrm): New static array.
3855 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3857 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3859 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3862 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3864 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3867 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3869 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3870 m68010up, not just m68020up | cpu32.
3872 * Makefile.in (SONAME): New variable.
3873 ($(SHLINK)): Make a link to the transformed name, as well.
3874 (stamp-tshlink): New target.
3875 (install): Skip stamp-tshlink during install.
3877 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3879 * configure.in: Call AC_ARG_PROGRAM.
3880 * configure: Rebuild.
3881 * Makefile.in (program_transform_name): New variable.
3882 (install): Transform library name before installing it.
3884 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3886 * i960-dis.c (mem): Add HX dcinva instruction.
3888 Support for building as a shared library, based on patches from
3889 Alan Modra <alan@spri.levels.unisa.edu.au>:
3890 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3891 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3892 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3893 * configure: Rebuild.
3894 * Makefile.in (ALLLIBS): New variable.
3895 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3896 (COMMON_SHLIB, SHLINK): New variables.
3897 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3898 (STAGESTUFF): Remove variable.
3899 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3900 (stamp-piclist, piclist): New targets.
3901 ($(SHLIB), $(SHLINK)): New targets.
3902 ($(OFILES)): Depend upon stamp-picdir.
3903 (disassemble.o): Build twice if PICFLAG is set.
3904 (MOSTLYCLEAN): Add pic/*.o.
3905 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3906 (distclean): Remove pic and stamp-picdir.
3907 (install): Install shared libraries.
3908 (stamp-picdir): New target.
3910 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3912 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3913 Print unknown instruction as "unknown", rather than in hex.
3915 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3917 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3919 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3921 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3923 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3925 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3926 when necessary. From Ulrich Drepper
3927 <drepper@myware.rz.uni-karlsruhe.de>.
3929 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3931 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3932 sparc_num_opcodes. Update architecture enum values.
3933 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3934 (sparc_opcode_lookup_arch): New function.
3935 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3936 (sparc_opcodes): Add v9a shutdown insn.
3938 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3940 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3941 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3943 (print_insn_sparc64): Deleted.
3944 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3947 * sparc-opc.c (architecture_pname): Add v9a.
3949 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3951 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3952 incorrectly defined as 0x16 when it should be 0x15.
3953 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3954 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3955 excb (exception barrier) which is defined in the Alpha
3956 Architecture Handbook version 2.
3957 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3958 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3959 disassembled as or, for example.
3961 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3963 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3964 (_print_insn_mips): Change i from int to unsigned int.
3966 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3968 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3969 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3971 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3973 * i386-dis.c: Added Pentium Pro instructions.
3975 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3977 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3980 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3982 * sh-opc.h (sh_nibble_type): Added REG_B.
3983 (sh_arg_type): Added A_REG_B.
3984 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3986 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3988 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3990 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3992 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3994 * Makefile.in (distclean): Remove stamp-h. From Ronald
3995 F. Guilmette <rfg@monkeys.com>.
3997 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3999 From David Mosberger-Tang <davidm@azstarnet.com>:
4000 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4003 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4005 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4006 (sh_table): Added many SH3 opcodes.
4007 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4009 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4011 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4012 (subco,subco.): Mark this PPC, not PPCCOM.
4014 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4016 * configure: Rebuild with autoconf 2.7.
4018 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4020 * configure: Rebuild with autoconf 2.6.
4022 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4024 * configure.in: Sort list of architectures. Accept but do nothing
4025 for alliant, convex, pyramid, romp, and tahoe.
4027 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4029 * a29k-dis.c (print_special): Change num to unsigned int.
4031 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4033 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4036 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4038 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4039 * configure: Rebuilt.
4041 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4043 * configure.in: Add case for bfd_i860_arch.
4044 * configure: Rebuild.
4046 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4048 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4049 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4050 (NEXTDOUBLE): Likewise.
4051 (print_insn_m68k): Don't match fmoveml if there is more than one
4052 register in the list.
4053 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4055 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4057 * m68k-opc.c: Use #W rather than #w.
4058 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4060 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4062 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4063 and likewise for all the dbxx opcodes.
4065 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4067 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4069 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4071 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4072 the VR4100 specific instructions to the mips_opcodes structure.
4074 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4076 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4077 ugly Metrowerks bug in CW6, is fixed in CW7.
4079 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4081 * ppc-opc.c (whole file): Add flags for common/any support.
4083 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4085 * Makefile.in (BISON): Remove macro.
4086 (FLAGS_TO_PASS): Remove BISON.
4088 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4090 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4092 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4093 instructions that take no args by looking at the match mask.
4094 (print_insn_arg): Always print "%" before register names.
4095 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4096 [case '_']: Don't print "@#" before address.
4097 [case 'J']: Use "%s" as format string, not register name.
4098 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4100 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4102 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4105 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4107 From David Mosberger-Tang <davidm@azstarnet.com>
4109 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4110 (alpha_insn_set): added definitions for VAX floating point
4111 instructions (Unix compilers don't generate these, but handcoded
4112 assembly might still use them).
4114 * alpha-dis.c (print_insn_alpha): added support for disassembling
4115 the miscellaneous instructions in the Alpha instruction set.
4117 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4119 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4120 no longer create sysdep.h, sed ppc-opc.c to work around a
4121 serious Metrowerks C bug.
4122 * mpw-make.in: Remove.
4123 * mpw-make.sed: New file, used by mpw-configure to edit
4124 Makefile.in into an MPW makefile.
4126 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4128 * Makefile.in (maintainer-clean): New synonym for realclean.
4130 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4132 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4133 which use '0', '1', and '2' instead. Specify the proper size for
4134 a pmove immediate operand. Correct the pmovefd patterns to be
4135 moves to a register, not from a register.
4136 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4138 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4140 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4141 %psr, %wim, %tbr as F_NOTV9.
4143 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4145 * Makefile.in (Makefile): Just rebuild Makefile when running
4147 (config.h, stamp-h): New targets.
4148 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4149 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4150 rebuilding config.h.
4151 * configure: Rebuild.
4153 * mips-opc.c: Change unaligned loads and stores with "t,A"
4154 operands to use "t,A(b)".
4156 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4158 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4160 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4162 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4163 until 3 instead of until 2.
4165 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4167 * Makefile.in (ALL_CFLAGS): Define.
4168 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4169 (MOSTLYCLEAN): Add config.log.
4170 (distclean): Don't remove config.log.
4171 * configure.in: Substitute HDEFINES.
4172 * configure: Rebuild.
4174 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4176 * sh-opc.h (sh_arg_type): Add F_FR0.
4177 (sh_table, case fmac): Add F_FR0 as first argument.
4179 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4181 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4183 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4185 * sparc-dis.c: Remove all references to NO_V9.
4187 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4189 * aclocal.m4: Just include ../bfd/aclocal.m4.
4190 * configure: Rebuild.
4192 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4194 * sparc-dis.c (X_DISP19): Define.
4195 (print_insn, case 'G'): Use it.
4196 (print_insn, case 'L'): Sign extend displacement.
4198 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4200 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4201 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4202 host_makefile_frag or frags.
4203 * aclocal.m4: New file.
4204 * configure: Rebuild.
4205 * Makefile.in (INSTALL): Set to @INSTALL@.
4206 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4207 (INSTALL_DATA): Set to @INSTALL_DATA@.
4209 (AR_FLAGS): Set to rc rather than qc.
4210 (CC): Define as @CC@.
4211 (CFLAGS): Set to @CFLAGS@.
4212 (@host_makefile_frag@): Remove.
4213 (config.status): Remove dependency upon @frags@.
4215 * configure.in: ../bfd/config.bfd now just sets shell variables.
4216 Use them rather than looking through target Makefile fragments.
4217 * configure: Rebuild.
4219 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4221 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4223 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4225 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4226 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4229 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4230 (lookup_{name,value}): New functions.
4231 (prefetch_table): New static local.
4232 (sparc_{encode,decode}_prefetch): New functions.
4233 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4235 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4237 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4240 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4242 * sh-dis.c: Correct comment on first line of file.
4244 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4246 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4248 * sparc-opc.c (asi, membar): New static locals.
4249 (sparc_{encode,decode}_{asi,membar}): New functions.
4250 (sparc_opcodes, membar insn): Fix.
4251 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4252 Support decoding of membar masks.
4255 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4257 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4259 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4261 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4262 and likewise for the other branches. Add bhs as an alias for bcc,
4263 and likewise for the size variants. Add dbhs as an alias for
4266 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4268 * sh-opc.h (FP sts instructions): Update to match reality.
4270 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4272 * m68k-dis.c: (fpcr_names): Add % before all register names.
4273 (reg_names): Likewise.
4274 (print_insn_arg): Don't explicitly print % before register names.
4275 Add % before register names in static array names. In case 'r',
4276 print data registers as `@(Dn)', not `Dn@'. When printing a
4277 memory address, don't print @# before it.
4278 (print_indexed): Change base_disp and outer_disp from int to
4279 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4280 syntax. Sign extend 8 byte displacement correctly.
4281 (print_base): Print using MIT syntax. Print zpc when appropriate.
4282 Change parameter disp from int to bfd_vma.
4284 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4287 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4289 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4290 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4291 * sh-opc.h (sh_arg_type): Add new operand types.
4292 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4294 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4296 * Makefile.in (distclean): Remove generated file config.h.
4298 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4300 * Makefile.in (distclean): Remove generated file config.h.
4302 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4304 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4306 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4308 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4309 rather than numopcodes. Use m68k_opcodes rather than removed
4310 opcode function. Don't check F_ALIAS.
4311 (print_insn_arg): Change first parameter to be const char *.
4312 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4313 (m68k-opc.o): New target.
4314 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4315 * configure: Rebuild.
4317 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4319 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4320 (opcode_bits, opcode_hash_table): New variables.
4321 (opcodes_initialized): Renamed from opcodes_sorted.
4322 (build_hash_table): New function.
4323 (is_delayed_branch): Use hash table.
4324 (print_insn): Renamed from print_insn_sparc, made static.
4325 Build and use hash table. If !sparc64, ignore sparc64 insns,
4326 and vice-versa if sparc64.
4327 (print_insn_sparc, print_insn_sparc64): New functions.
4328 (compare_opcodes): Move sparc64 opcodes to end.
4329 Print commutative insns with constant second.
4330 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4332 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4334 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4335 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4336 avoids printing a delay slot in a delay slot.
4337 * sh-opc.h (sh_table): Fully bracket last entry.
4339 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4341 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4343 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4345 * configure.in: Get host_makefile_frag from ${srcdir}.
4347 * configure.in: Autoconfiscated. Check for string[s].h. Create
4348 config.h from config.in. Don't set up sysdep.h link.
4349 * sysdep.h: New file.
4350 * configure, config.in: New files, generated from configure.in.
4351 * Makefile.in: Updated to be processed autoconf-style.
4352 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4353 (Makefile): Depend on config.status.
4354 (config.status): New rule.
4355 * configure.bat: Update Makefile substitutions.
4357 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4359 * mips-opc.c (L1): Define.
4360 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4361 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4364 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4366 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4367 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4368 have multiple add units but only a single logical unit.
4370 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4371 shifted by 18, without any insertion or extraction function.
4372 (insert_cr, extract_cr): Remove.
4374 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4376 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4379 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4381 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4382 * sh-opc.h: Add copyright.
4384 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4386 * Makefile.in (crunch-m68k): Delete extra target accidentally
4387 checked in a while ago.
4389 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4391 * sh-opc.h (sh_table): Add SH3 support.
4393 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4395 * sh-opc.h: Added bsrf and braf.
4397 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4399 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4400 bogus [ls]fm{ea,fd} patterns.
4402 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4403 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4404 initialize it from memory. Make function static.
4405 (print_insn_{big,little}_arm): New functions.
4406 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4407 the correct endianness.
4409 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4411 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4414 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4416 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4417 17th, so that it builds again using GCC as the compiler.
4419 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4421 * mips-dis.c (print_insn_little_mips): Cast return value from
4422 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4423 expects an unsigned long, and that might be fewer words of
4424 argument storage (e.g., if bfd_vma is long long on a 32-bit
4426 (print_insn_big_mips): Likewise with bfd_getb32 value.
4427 (_print_insn_mips): Now static.
4429 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4431 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4432 gcc memory hog problem with initializer is fixed.
4434 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4436 Merge in support for Mac MPW as a host.
4437 (Old change descriptions retained for informational value.)
4439 * mpw-config.in (archname): Compute from the config.
4440 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4442 * mpw-config.in (target_arch): Compute from canonical target.
4443 (m68k, mips, powerpc, sparc): Add architectures.
4444 * mpw-make.in (disassemble.c.o): Add.
4445 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4447 * mpw-config.in (BFD_MACHINES): Set to a default value.
4448 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4450 * mpw-make.in (CSEARCH): Add extra-include to search path.
4452 * mpw-config.in (varargs.h): Don't create.
4453 (sysdep.h): Create using forward-include.
4454 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4456 * mpw-config.in: New file, MPW version of configure.in.
4457 * mpw-make.in: New file, MPW version of Makefile.in.
4459 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4461 * alpha-dis.c (print_insn_alpha): Put empty statement after
4464 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4466 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4467 (low_sign_extend): Likewise.
4468 (get_field): Delete unused function.
4469 (set_field, deposit_14, deposit_21): Likewise.
4471 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4473 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4476 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4478 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4480 * alpha-opc.h (OSF_ASMCODE): define
4481 print pal-code names as defined in App C of the
4482 Alpha Architecture Reference Manual
4484 * alpha-dis.c: cleaned up output
4485 print stylized code forms as defined in App A.4.3 of the
4486 Alpha Architecture Reference Manual
4488 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4490 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4492 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4495 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4497 * m68k-dis.c (opcode): New function. Returns address of opcode
4498 table entry given index, even if the opcode table was split to
4499 work around gcc bugs.
4500 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4502 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4503 (reg_names): Now const.
4504 (print_insn_arg): Arrays cacheFieldName and names now const.
4505 (print_indexed): Array scales now const.
4507 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4509 * ppc-opc.c: Sort recently added instructions by minor opcode
4510 number within major opcode number.
4512 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4514 * hppa-dis.c: Include libhppa.h.
4516 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4518 * mips-opc.c: Change dli to use M_DLI, and add dla.
4520 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4522 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4524 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4526 * mips-opc.c: Add r4650 mul instruction.
4528 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4530 * mips-opc.c: Add uld and usd macros for unaligned double load and
4533 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4535 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4536 mfdcr, mtdcr, icbt, iccci.
4538 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4540 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4541 signed char fields to shorts, more portable.
4543 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4545 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4546 char fields as signed chars, since they may have negative values.
4548 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4550 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4551 (mycroft@netbsd.org).
4553 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4555 From "Logg, Ed" <elogg@ea.com>:
4556 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4557 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4560 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4562 * ppc-opc.c: Changes based on patch from David Edelsohn
4563 <edelsohn@mhpcc.edu>.
4564 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4567 (insert_tbr): New static function.
4568 (extract_tbr): New static function.
4569 (XFXFXM_MASK, XFXM): Define.
4570 (XSPRBAT_MASK, XSPRG_MASK): Define.
4571 (powerpc_opcodes): Add instructions to access special registers by
4572 name. Add mtcr and mftbu.
4574 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4576 * mips-opc.c (P3): Define.
4577 (mips_opcodes): Add mad and madu.
4579 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4581 * configure.in: Add W65 support.
4582 * disassemble.c: Likewise.
4583 * w65-opc.h, w65-dis.c: New files.
4585 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4587 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4590 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4592 * mips-opc.c: Add dli as a synonym for li.
4594 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4596 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4597 print something for reserved opcode values, even if it won't
4600 * mips-dis.c (_print_insn_mips): When initializing, shift right
4601 and mask, to avoid sign extension problems on the Alpha.
4603 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4606 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4608 * sh-opc.h (mov.l gbr): Get direction right.
4609 * sh-dis.c (print_insn_shx): New function.
4610 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4611 print opcodes with right byte order.
4613 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4615 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4616 to avoid conflicts with getopt.
4618 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4620 * hppa-dis.c (print_insn_hppa): Read the instruction using
4621 bfd_getb32, so that it works on a little endian or 64 bit host.
4622 Remove unused local variable op.
4624 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4626 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4627 addu does not work correctly if -mips3.
4629 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4631 * a29k-dis.c (print_special): Add special register names defined
4632 on 29030, 29040 and 29050.
4633 (print_insn): Handle new operand type 'I'.
4635 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4637 * Makefile.in (INSTALL): Use top level install.sh script.
4639 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4641 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4642 that it works on a little endian host.
4644 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4646 * configure.in: Use ${config_shell} when running config.bfd.
4648 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4650 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4652 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4654 * a29k-dis.c (print_insn): Print the opcode.
4656 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4658 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4660 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4662 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4664 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4666 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4667 which store a value into memory.
4669 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4671 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4672 * arm-dis.c, arm-opc.h: New files.
4674 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4676 * Makefile.in (ns32k-dis.o): Add dependency.
4677 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4678 string, not as array of chars.
4680 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4682 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4684 * sparc-opc.c: Added sparclite extended FP operations, and
4685 versions of v9 impdep* instructions permitting specification of
4688 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4690 * i960-dis.c (reg_names): Now const.
4691 (struct sparse_tabent): New type, copied from array type in mem
4693 (ctrl): Local static array ctrl_tab now const.
4694 (cobr): Local static array cobr_tab now const.
4695 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4696 static variable mem_tab no longer explicitly initialized. Changed
4697 mem_init to const array of struct sparse_tabent.
4698 (reg): Local static variable reg_tab no longer explicitly
4699 initialized. Changed reg_init to const array of struct
4701 (ea): Local static array scale_tab now const.
4703 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4706 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4708 * configure.bat: the disassember needs to be enabled for
4709 "objdump -d" to work in djgpp.
4711 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4713 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4714 (invalid_float): Enabled general version, doesn't require running
4715 on ns32k host. Changed to take char* argument, and test for
4716 explicitly specified sizes, instead of using sizeof() on host CPU
4718 (INVALID_FLOAT): Cast first argument.
4719 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4720 list_P032, list_M032): Now const.
4721 (optlist, list_search): Made appropriate arguments now point to
4723 (print_insn_arg): Changed static array of one-character-string
4724 pointers into a static const array of characters; fixed sprintf
4725 statement accordingly.
4727 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4729 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4730 from distribution. A ns32k-dis.c from a previous distribution has
4731 been brought up to date and supports the new interface.
4733 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4735 * configure.in: add bfd_ns32k_arch target support.
4737 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4738 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4740 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4742 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4745 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4747 * h8300-dis.c, mips-dis.c: Don't use true and false.
4749 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4751 * configure.in: Change --with-targets to --enable-targets.
4753 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4755 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4756 opcodes to the first instruction with that opcode, to speed
4757 disassembly of large files. From ralphc@pyramid.com (Ralph
4760 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4762 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4764 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4766 * configure.bat: update to latest makefile.in
4768 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4770 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4771 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4772 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4773 slot insn is in a delay slot.
4774 * z8k-opc.h: (resflg): Fix patterns.
4775 * h8500-opc.h Fix CR insn patterns.
4777 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4779 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4780 "cmpl" before POWER versions, so that gas -many uses them.
4782 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4784 * disassemble.c: New file.
4785 * Makefile.in (OFILES): Add disassemble.o.
4786 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4787 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4788 binutils/configure.in.
4790 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4791 opcode being examined.
4793 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4795 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4796 (insert_ral, insert_ram, insert_ras): New functions.
4797 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4798 RAS for store with update.
4800 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4802 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4803 (edelsohn@npac.syr.edu).
4805 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4807 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4810 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4812 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4814 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4816 * ppc-opc.c (powerpc_operands): The signedp field has been
4817 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4818 instead. Add new operand SISIGNOPT.
4819 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4820 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4821 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4824 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4826 * i386-dis.c (struct private): Renamed to dis_private. `private'
4827 is a reserved word for dynix cc.
4829 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4831 * configure.in: Change error message to refer to bfd/config.bfd
4832 rather than bfd/configure.in.
4834 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4836 * ppc-opc.c: Define POWER2 as short alias flag.
4837 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4840 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4842 * i960-dis.c (print_insn_i960): Don't read a second word for
4843 opcodes 0, 1, 2 and 3.
4845 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4847 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4849 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4851 * m68881-ext.c: Removed; no longer used.
4852 * Makefile.in: Changed accordingly.
4854 * m68k-dis.c (ext_format_68881): Don't declare.
4855 (print_insn_m68k): If an instruction uses place 'i', it uses at
4856 least four fixed bytes.
4857 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4858 extended float, convert to double using floatformat_to_double, not
4859 ieee_extended_to_double, and fetch the data before converting it.
4861 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4863 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4864 davidj@ICSI.Berkeley.EDU (David Johnson).
4866 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4868 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4869 PowerPC uses bdnz[l][a].
4871 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4873 * dis-buf.c, i386-dis.c: Include sysdep.h.
4875 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4877 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4879 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4880 by Motorola PowerPC 601 with PPC_OPCODE_601.
4881 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4882 Disassemble Motorola PowerPC 601 instructions as well as normal
4883 PowerPC instructions.
4885 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4887 * i960-dis.c (reg, mem): Just use a static array instead of
4890 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4892 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4893 condition name index if this is for a negated condition.
4895 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4896 Floating point format for 'H' operand is backwards from normal
4897 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4898 operands (fmpyadd and fmpysub), handle bizarre register
4899 translation correctly for single precision format.
4901 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4902 or 'I' operands if the next format specifier is 'M' (fcmp
4903 condition completer).
4905 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4907 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4908 single number giving a bitmask for the MB and ME fields of an M
4909 form instruction. Change NB to accept 32, and turn it into 0;
4910 also turn 0 into 32 when disassembling. Seperated SH from NB.
4911 (insert_mbe, extract_mbe): New functions.
4912 (insert_nb, extract_nb): New functions.
4913 (SC_MASK): Mask out SA and LK bits.
4914 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4915 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4916 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4917 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4918 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4919 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4920 (powerpc_macros): Define table of macro definitions.
4921 (powerpc_num_macros): Define.
4923 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4924 if PPC_OPERAND_NEXT is set.
4926 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4928 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4929 char. Retrieve contents using bfd_getl32 instead of shifting.
4931 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4933 * ppc-opc.c: New file. Opcode table for PowerPC, including
4934 opcodes for POWER (RS/6000).
4935 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4936 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4937 (CFILES): Add ppc-dis.c.
4938 (ppc-dis.o, ppc-opc.o): New targets.
4939 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4941 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4943 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4944 No space before 'u', 'f', or 'N'.
4946 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4948 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4949 farther than we should.
4951 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4953 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4955 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4957 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4959 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4960 needs it, to prevent reading past the end of a section.
4962 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4964 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4965 Removed t,A case for la; always use t,A(b) case.
4967 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4969 From Ted Lemen <mellon@pepper.ncd.com>
4970 * mips-dis.c (print_insn_arg): Handle 'k'.
4971 * mips-opc.c: Make cache use k, not t.
4973 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4975 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4976 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4977 FLOAT_FORMAT_CODE to put out floating point register names.
4979 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4981 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4983 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4985 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4987 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4989 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4990 larger than 32. Moved dsxx32 variants first for disassembler.
4992 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4994 * z8kgen.c, z8k-opc.h: Add full lda information.
4996 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4998 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4999 movb instructions. Any necessary space will be emitted by
5000 the code to handle nullification completers.
5002 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5004 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5006 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5008 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5009 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5011 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5013 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5015 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5017 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5018 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5020 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5022 * m88k-dis.c (m88kdis): comment change. Remove space after
5024 (printop): handle new arg types DEC and XREG for m88110.
5026 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5028 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5029 type for absolute branch addresses. Delete special
5030 "ble" and "be" code in 'W' operand code.
5032 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5034 * mips-opc.c: Set hazard information correctly for branch
5035 likely instructions.
5037 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5039 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5040 info->fprintf_func for printing and info->print_address_func for
5043 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5045 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5047 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5049 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5050 Corrected second case of "b" for disassembler.
5052 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5054 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5055 to BFD swapping routines to correspond to BFD name changes.
5057 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5059 * mips-opc.c: Change div machine instruction to be z,s,t rather
5060 than s,t. Change div macro to be d,v,t rather than d,s,t.
5061 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5062 rem and remu which generates only the corresponding div
5063 instruction. This is for compatibility with the MIPS assembler,
5064 which only generates the simple machine instruction when an
5065 explicit destination of $0 is used.
5066 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5068 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5070 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5071 WR_31 hazard for bal, bgezal, bltzal.
5073 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5075 * hppa-dis.c (print_insn_hppa): Use print function
5076 from within the disassemble_info, not fprintf_filtered.
5078 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5080 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5081 Law, law@cs.utah.edu.)
5083 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5085 * mips-opc.c ("absu"): Removed.
5088 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5090 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5091 Changed hazard information to distinguish between memory load
5092 delays and coprocessor load delays.
5094 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5096 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5098 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5100 * configure.in: Don't pass cpu to config.bfd.
5102 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5104 * m88k-dis.c (m88kdis): Make class unsigned.
5106 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5108 * alpha-dis.c (print_insn_alpha): One branch format case was
5109 missing the instruction name.
5111 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5113 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5114 Add the arch-specific auxiliary files.
5115 (OFILES): Remove the arch-specific auxiliary files
5116 and use BFD_MACHINES instead of DIS_LIBS.
5117 * configure.in: Set BFD_MACHINES based on --with-targets option.
5119 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5121 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5124 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5126 * sparc-opc.c: Change CONST to const to deal with gcc
5127 -Dconst=__const -traditional.
5129 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5131 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5132 coprocessor instructions out of #if 0, and made them use new
5135 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5137 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5139 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5141 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5142 instruction, for use by the disassembler.
5144 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5145 hand-coded sign extensions that depended on 32-bit host ints.
5146 FIXME, we still depend on big-endian host bitfield ordering.
5147 (sparc_print_insn): Set the insn_info_valid field, and the
5148 other fields that describe the instruction being printed.
5150 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5152 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5153 `jmp' instead of just one of them.
5155 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5157 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5158 (fput_fp_reg_r): Renamed from fput_reg_r.
5159 (fput_fp_reg): New function.
5160 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5162 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5164 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5166 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5168 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5170 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5171 don't output a space.
5173 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5175 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5177 * mips-opc.c: New file, containing opcode table from
5178 ../include/opcode/mips.h.
5179 * Makefile.in: Add it.
5181 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5183 * m88k-dis.c: New file, moved in from gdb and changed to use the
5184 new dis-asm.h disassembler interface.
5185 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5186 (m88k-dis.o): New target.
5188 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5190 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5191 argument string const char * to correspond to opcode/mips.h.
5193 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5195 * mips-dis.c: Updated to account for name changes in new version
5197 * Makefile.in: Added header file dependencies.
5199 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5201 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5203 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5205 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5206 extend, rather than shifts.
5208 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5210 * Makefile.in: Undo 15 June change.
5212 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5214 * m68k-dis.c (print_insn_arg): Change return value to byte count
5216 * m68k-dis.c: Re-write to detect invalid operands before
5217 printing anything, so we can handle this the same way we
5218 handle invalid opcodes.
5220 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5222 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5224 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5226 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5229 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5231 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5233 * configure.in: Do make sysdep.h link.
5234 * Makefile.in: Search ../include. Don't search ../bfd.
5236 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5238 Changes from Jeff Law, law@cs.utah.edu:
5239 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5240 Do not print a space before the completers specified by
5243 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5245 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5246 defined, since gdb has been fixed.
5248 Changes from Jeff Law, law@cs.utah.edu:
5249 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5250 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5251 be a *disassemble_info, not a *FILE.
5252 * hppa-dis.c: Support 'd', '!', and 'a'.
5253 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5254 * hppa-dis.c: Delete cases which are no longer needed.
5256 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5258 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5260 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5262 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5265 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5267 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5268 * configure.in: No longer need to configure to get sysdep.h.
5270 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5272 * Patches from Jeffrey Law <law@cs.utah.edu>.
5273 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5274 templates for 1.1 FP computational instructions.
5276 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5278 * h8500-dis.c (print_insn_h8500): Address argument is type
5280 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5283 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5284 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5286 * sparc-dis.c (compare_opcodes): Move static declaration to
5289 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5291 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5292 instruction, remove unimp hack from 'l' argument.
5294 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5296 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5299 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5301 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5302 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5305 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5307 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5308 arrays of string pointers to 2-d arrays of chars, to save
5311 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5313 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5314 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5316 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5318 * hppa-dis.c: New file from Utah, adapted to new disassembler
5320 * Makefile.in: Include it.
5322 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5324 * sh-dis.c, sh-opc.h: New files.
5326 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5328 * alpha-dis.c, alpha-opc.h: New files.
5330 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5332 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5335 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5337 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5339 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5341 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5344 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5346 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5347 and double percent signs a few places.
5349 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5351 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5352 Use info->print_address_func not print_address.
5354 * dis-buf.c (generic_print_address): New function.
5356 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5358 * Makefile.in: Add sparc-dis.c.
5359 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5361 Add `add' instruction to the set that get checked
5362 for a preceding `sethi' in order to print an absolute address.
5363 * (print_insn): Disassembly prefers real instructions.
5364 (is_delayed_branch): Speed up.
5365 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5366 Still missing some float ops, and needs testing.
5367 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5368 F_ALIAS. Use printf, not fprintf, when not passing a file
5370 (compare_opcodes): Check that identical instructions have
5371 identical opcodes, complain otherwise.
5374 * Include reg_names.
5376 Use dis-asm.h/read_memory_func interface.
5378 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5380 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5381 deliberately return non-zero to setjmp from longjmp. Otherwise
5382 this code fails to compile.
5384 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5386 * m68k-dis.c: Fix prototype for fetch_arg().
5388 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5390 * dis-buf.c: New file, for new read_memory_func interface.
5391 Makefile.in (OFILES): Include it.
5392 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5393 Use new read_memory_func interface.
5395 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5397 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5398 * h8500-opc.h: Fix couple of opcodes.
5400 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5402 * Makefile.in: add dvi & installcheck targets
5404 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5406 * Makefile.in: Update for h8500-dis.c.
5408 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5410 * h8500-dis.c, h8500-opc.h: New files
5412 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5414 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5415 ../include/dis-asm.h.
5416 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5417 and ../gdb/m68k-pinsn.c).
5418 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5419 and ../gdb/i386-pinsn.c).
5420 * m68881-ext.c: New file. Moved definition of
5421 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5422 * Makefile.in: Adjust for new files.
5423 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5424 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5425 can be dis-assembled.
5427 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5429 * mips-dis.c (print_insn_arg): Now returns void.
5431 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5433 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5434 files that use the macros.
5436 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5438 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5439 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5440 (CFILES): Added mips-dis.c.
5442 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5444 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5445 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5447 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5449 * Makefile.in: Improve *clean rules.
5450 * configure.in: Allow a default host.
5452 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5454 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5455 files include other sysdep files
5457 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5459 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5461 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5463 * configure.in: For host support, use ../bfd/configure.host
5464 so it stays in sync with the ../bfd/hosts database.
5466 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5468 * configure.in: use cpu-vendor-os triple instead of nested cases
5470 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5472 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5473 *always* the wrong one.
5475 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5477 * z8kgen.c: added copyright info
5479 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5481 * z8k-dis.c (unparse_instr): prettier tabs
5482 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5484 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5486 * configure.in: Add ncr* configuration.
5487 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5488 picayune ANSI compilers happy.
5490 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5492 * configure.in (i386): Make i386 and i486 synonymous for now.
5493 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5495 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5497 * Makefile.in (install): Fix typo.
5499 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5501 * Makefile.in (make): Remove obsolete crud.
5502 (sparc-opc.o): Avoid Sun Make VPATH bug.
5504 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5506 * Makefile.in: since there are no SUBDIRS, remove rule and
5507 references of subdir_do.
5509 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5511 * Makefile.in (install): Get the library name right here too.
5512 Don't install bfd.h, since it's unrelated to this library. No
5513 subdirs to recurse into, either.
5514 (CFILES): The source file has a .c suffix, not .o.
5516 * sparc-opc.c: New file, moved from BFD.
5517 * Makefile.in (OFILES): Build it.
5519 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5521 * z8k-dis.c: fixed forward refferences of some declarations.
5523 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5525 * Makefile.in: get the name of the library right
5527 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5529 * z8k-dis.c: knows how to disassemble z8k stuff
5530 * z8k-opc.h: new file full of z8000 opcodes
5534 version-control: never