1 2002-02-15 Richard Henderson <rth@redhat.com>
3 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
6 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
8 * po/da.po: Updated translation.
10 2002-02-12 Graydon Hoare <graydon@redhat.com>
12 * cgen-asm.in (parse_insn_normal): Change call from
13 @arch@_cgen_parse_operand to cd->parse_operand, to
14 facilitate CGEN_ASM_INIT_HOOK doing useful work.
16 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
18 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
21 2002-02-11 Alan Modra <amodra@bigpond.net.au>
23 * Makefile.am: "make dep-am".
24 * Makefile.in: Regenerate.
25 * aclocal.m4: Regenerate.
26 * config.in: Regenerate.
27 * configure: Regenerate.
29 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
31 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
32 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
34 * configure: Regenerate.
36 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
38 * cgen-dis.c: Add prototypes for count_decodable_bits
39 and add_insn_to_hash_chain.
41 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
43 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
46 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
48 * or32-opc.c: Fix compile time warning messages.
49 * or32-dis.c: Fix compile time warning messages.
51 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
54 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
55 * sh64-opc.c: Regenerate.
56 2001-03-13 DJ Delorie <dj@redhat.com>
57 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
58 purpose is more obvious.
59 * sh64-opc.c (shmedia_table): Ditto.
60 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
61 (print_insn_shmedia): Ditto.
62 2001-03-12 DJ Delorie <dj@redhat.com>
63 * sh64-opc.c: Adjust comments to reflect reality: replace bits
64 3:0 with zeros (not "reserved"), replace "rrrrrr" with
65 "gggggg" for two-operand floating point opcodes. Remove
67 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
68 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
69 Correct printing of .byte:s. Return number of printed bytes or
71 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
72 to next four-byte-alignment if insn or data is not aligned.
73 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
74 * sh64-dis.c: Update comments and fix comment formatting.
75 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
76 Abort instead of setting length to 0.
77 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
78 crange_bsearch_cmpl, sh64_get_contents_type,
79 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
80 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
81 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
82 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
83 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
84 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
85 address with same prefix as SHcompact.
86 In the disassembler, use a .cranges section for linked executables.
87 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
88 and update for using structure in info->private_data.
89 (struct sh64_disassemble_info): New.
90 (is_shmedia_p): Delete.
91 (crange_qsort_cmpb): New function.
92 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
93 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
94 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
95 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
96 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
97 pair. Display addresses for linked executables only.
98 (print_insn_sh64x_media): Initialize info->private_data by calling
99 init_sh64_disasm_info.
100 (print_insn_sh64x): Ditto. Find out type of contents by calling
101 sh64_contents_type_disasm. Display data regions using ".long" and
102 ".byte" similar to unrecognized opcodes.
103 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
104 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
105 information in section flags before considering symbols. Don't
106 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
107 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
108 matching $target $canon_targets instead of looking at the
109 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
110 * configure: Regenerate.
111 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
112 * sh64-opc.c (shmedia_creg_table): New.
113 * sh64-opc.h (shmedia_creg_info): New type.
114 (shmedia_creg_table): Declare.
115 * sh64-dis.c (creg_name): New function.
116 (print_insn_shmedia): Use it.
117 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
118 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
119 print_insn_sh64l if little-endian.
120 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
121 (print_insn_sh64l): New.
122 (print_insn_sh64x): New.
123 (print_insn_sh64x_media): New.
124 (print_insn_sh64): Break out code to print_insn_sh64x and
125 print_insn_sh64x_media.
126 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
127 * sh64-opc.h: New file
128 * sh64-opc.c: New file
129 * sh64-dis.c: New file
130 * Makefile.am: Add sh64 targets.
131 (HFILES): Add sh64-opc.h.
132 (CFILES): Add sh64-opc.c and sh64-dis.c.
133 (ALL_MACHINES): Add sh64 files.
134 * Makefile.in: Regenerate.
135 * configure.in: Add support for sh64 to bfd_sh_arch.
136 * configure: Regenerate.
137 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
138 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
140 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
141 * po/POTFILES.in: Regenerate.
142 * po/opcodes.pot: Regenerate.
144 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
146 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
148 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
150 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
152 2002-02-01 Alan Modra <amodra@bigpond.net.au>
154 * Makefile.am: Run "make dep-am"
155 * Makefile.in: Regenerate.
157 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
159 * or32-dis.c: New file.
160 * or32-opc.c: New file.
161 * configure.in: Add support for or32.
162 * configure: Regenerate.
163 * Makefile.am: Add support for or32.
164 * Makefile.in: Regenerate.
165 * disassemble.c: Add support for or32.
166 * po/POTFILES.in: Regenerate.
167 * po/opcodes.pot: Regenerate.
169 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
171 * configure: Regenerated.
173 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
175 * po/fr.po: Updated version.
177 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
179 * po/es.po: Updated version.
181 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
183 * po/da.po: New version.
185 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
187 * po/da.po: New file: Spanish translation.
188 * configure.in (ALL_LINGUAS): Add da.
189 * configure: Regenerate.
191 2002-01-22 Graydon Hoare <graydon@redhat.com>
193 * fr30-asm.c: Regenerate.
194 * fr30-desc.c: Likewise.
195 * fr30-desc.h: Likewise.
196 * fr30-dis.c: Likewise.
197 * fr30-ibld.c: Likewise.
198 * fr30-opc.c: Likewise.
199 * fr30-opc.h: Likewise.
200 * m32r-asm.c: Likewise.
201 * m32r-desc.c: Likewise.
202 * m32r-desc.h: Likewise.
203 * m32r-dis.c: Likewise.
204 * m32r-ibld.c: Likewise.
205 * m32r-opc.c: Likewise.
206 * m32r-opc.h: Likewise.
207 * m32r-opinst.c: Likewise.
208 * openrisc-asm.c: Likewise.
209 * openrisc-desc.c: Likewise.
210 * openrisc-desc.h: Likewise.
211 * openrisc-dis.c: Likewise.
212 * openrisc-ibld.c: Likewise.
213 * openrisc-opc.c: Likewise.
214 * openrisc-opc.h: Likewise.
215 * xstormy16-desc.c: Likewise.
217 2002-01-22 Richard Henderson <rth@redhat.com>
219 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
222 2002-01-22 Alan Modra <amodra@bigpond.net.au>
224 * Makefile.am: Run "make dep-am".
225 * Makefile.in: Regenerate.
226 * opcodes/po/POTFILES.in: Regenerate.
228 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
230 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
231 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
233 2002-01-18 Keith Walker <keith.walker@arm.com>
235 * arm-opc.h (arm_opcodes): Add bxj instruction.
237 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
239 * po/opcodes.pot: Regenerate.
240 * po/fr.po: Regenerate.
241 * po/sv.po: Regenerate.
242 * po/tr.po: Regenerate.
244 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
246 * po/tr.po: Import new version.
248 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
250 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
251 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
254 2002-01-10 matthew green <mrg@redhat.com>
256 * xstormy16-asm.c: Regenerate.
257 * xstormy16-desc.c: Likewise.
258 * xstormy16-desc.h: Likewise.
259 * xstormy16-dis.c: Likewise.
260 * xstormy16-opc.c: Likewise.
261 * xstormy16-opc.h: Likewise.
263 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
265 * po/es.po: New file: Spanish translation.
266 * configure.in (ALL_LINGUAS): Add es.
267 * configure: Regenerate.
269 2001-12-31 Jeffrey A Law (law@redhat.com)
271 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
272 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
273 Always emit a space after 'H'.
275 2001-12-18 matthew green <mrg@redhat.com>
277 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
279 2001-12-17 Richard Henderson <rth@redhat.com>
281 * alpha-opc.c (unop): Encode with RB as $sp.
283 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
285 * Makefile.am: Add support for xstormy16.
286 * Makefile.in: Regenerate.
287 * configure.in: Add support for xstormy16.
288 * configure: Regenerate.
289 * disassemble.c: Add support for xstormy16.
290 * xstormy16-asm.c: New generated file.
291 * xstormy16-desc.c: New generated file.
292 * xstormy16-desc.h: New generated file.
293 * xstormy16-dis.c: New generated file.
294 * xstormy16-ibld.c: New generated file.
295 * xstormy16-opc.c: New generated file.
296 * xstormy16-opc.h: New generated file.
298 2001-12-06 Richard Henderson <rth@redhat.com>
300 * alpha-opc.c (alpha_opcodes): Add wh64en.
302 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
304 * d10v-opc.c (d10v_predefined_registers): Remove warnings
305 introduced in Nov 29's patch.
307 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
310 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
313 * d10v-opc.c (RSRC_NOSP): New macro.
314 (d10v_operands): Add it.
315 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
317 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
319 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
320 (RSRC_SP): New macro.
321 (d10v_operands): Add it.
322 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
324 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
326 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
327 Also, break out of the loop as soon as an instruction has been
330 2001-11-17 matthew green <mrg@redhat.com>
332 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
334 2001-11-15 Alan Modra <amodra@bigpond.net.au>
336 * po/POTFILES.in: Regenerate.
338 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
339 (insert_bat, extract_bat, insert_bba, extract_bba,
340 insert_bd, extract_bd, insert_bdm, extract_bdm,
341 insert_bdp, extract_bdp, valid_bo,
342 insert_bo, extract_bo, insert_boe, extract_boe,
343 insert_ds, extract_ds, insert_de, extract_de,
344 insert_des, extract_des, insert_li, extract_li,
345 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
346 insert_nb, extract_nb, insert_nsi, extract_nsi,
347 insert_ral, insert_ram, insert_ras,
348 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
349 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
350 (extract_bd, extract_bdm, extract_bdp,
351 extract_ds, extract_des,
352 extract_li, extract_nsi): Implement sign extension without conditional.
353 (insert_bdm, extract_bdm,
354 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
355 (extract_bdm, extract_bdp): Correct 32 bit validation.
356 (AT1_MASK, AT2_MASK): Define.
357 (BBOAT_MASK): Define.
358 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
359 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
360 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
361 (PPCCOM32, PPCCOM64): Define.
362 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
363 and add new patterns to implement 64 bit branches with hints. Move
364 booke instructions so they match before ppc64.
366 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
367 64 bit default targets, and parse "32" and "64" in options.
369 (print_insn_powerpc): Pass dialect to operand->extract.
371 2001-11-14 Dave Brolley <brolley@redhat.com>
373 * cgen-dis.c (count_decodable_bits): New function.
374 (add_insn_to_hash_chain): New function.
375 (hash_insn_array): Call add_insn_to_hash_chain.
376 (hash_insn_list): Call add_insn_to_hash_chain.
377 * m32r-dis.c: Regenerated.
378 * fr30-dis.c: Regenerated.
380 2001-11-14 Andreas Jaeger <aj@suse.de>
382 * i386-dis.c (print_insn): Use x86-64 as option.
384 2001-11-14 Alan Modra <amodra@bigpond.net.au>
386 * disassemble.c (disassembler): Call print_insn_i386.
387 * i386-dis.c (SUFFIX_ALWAYS): Define.
388 (struct dis_private): Add orig_sizeflag.
389 (print_insn_i386): Make it a wrapper, calling..
390 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
391 warning without using volatile by moving orig_sizeflag to priv,
392 and removing inbuf. Parse disassembler_options.
393 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
395 (putop): Remove #ifdef SUFFIX_ALWAYS.
397 2001-11-11 Timothy Wall <twall@alum.mit.edu>
399 * tic54x-dis.c: Use revised opcode structure. Export opcode
401 (has_lkaddr): Don't forget about Lmem insns.
402 * tic54x-opc.c: Add emulation trap. Parallel table now uses
403 standard opcode templates.
405 2001-11-13 Zack Weinberg <zack@codesourcery.com>
407 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
408 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
409 category instead of Ew.
411 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
413 * m68k-opc.c: Fix definitions of wddata[bwl].
415 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
417 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
418 fit in the buffer, try to match the empty keyword.
420 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
422 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
423 * fr30-ibld.c: Regenerate.
424 * m32r-ibld.c: Regenerate.
425 * openrisc-ibld.c: Regenerate.
427 2001-11-04 Chris Demetriou <cgd@broadcom.com>
429 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
431 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
433 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
434 * configure: Regernate.
435 * po/fr.po: New file.
436 * po/sv.po: New file.
437 * po/tr.po: New file.
439 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
441 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
444 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
446 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
448 * Makefile.in: Regenerate.
449 * mmix-dis.c, mmix-opc.c: New files.
451 2001-10-29 Kazu Hirata <kazu@hxi.com>
453 * d30v-dis.c: Fix a comment typo.
455 2001-10-23 Chris Demetriou <cgd@broadcom.com>
457 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
458 "bltzall" as writing GPR 31 (since they do).
460 * mips-dis.c (print_insn_arg): Calculate info->target
462 (print_insn_mips): Fill in instruction info.
463 (print_mips16_insn_arg): Remove unneded variable 'val'.
464 Removed duplicated instruction target calculations,
465 calculate once and print that result. Use same idiom for
466 masking the jump segment bits as is used in print_insn_arg.
468 2001-10-20 Alan Modra <amodra@bigpond.net.au>
470 * ppc-opc.c (CT): Make it an optional operand.
472 2001-10-17 Chris Demetriou <cgd@broadcom.com>
474 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
475 SB-1 binaries include instructions specific to the SB-1.
476 * mips-opc.c (SB1): New definition.
477 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
478 "recip.ps", "rsqrt.ps", and "sqrt.ps".
480 2001-10-17 matthew green <mrg@redhat.com>
482 * ppc-opc.c (STRM): New AltiVec operand.
483 (XDSS): New AltiVec instruction form.
484 (mtvscr): Correct operand list.
485 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
487 2001-10-17 Alan Modra <amodra@bigpond.net.au>
489 * po/POTFILES.in: Regenerate.
491 2001-10-13 matthew green <mrg@redhat.com>
493 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
494 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
495 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
497 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
499 * cgen-ibld.in: Include safe-ctype.h in preference to
501 * cgen-asm.in: Include safe-ctype.h in preference to
502 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
503 TOLOWER instead of tolower.
504 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
505 string elements in constructed regular expression.
506 * fr30-asm.c: Regenerate.
507 * fr30-desc.c: Regenerate.
508 * fr30-ibld.c: Regenerate.
509 * m32r-asm.c: Regenerate.
510 * m32r-desc.c: Regenerate.
511 * m32r-ibld.c: Regenerate.
512 * openrisc-asm.c: Regenerate.
513 * openrisc-desc.c: Regenerate.
514 * openrisc-ibld.c: Regenerate.
515 * po/opcodes.pot: Regenerate.
517 2001-10-12 matthew green <mrg@redhat.com>
519 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
520 instruction field instruction/extraction functions for new BookE
521 DE form instructions.
522 (CT): New macro for CT field in an X form instruction.
523 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
525 (PPC64): Don't include PPC_OPCODE_PPC.
526 (403): New opcode macro for PPC403 processors.
527 (BOOKE): New opcode macro for BookE processors.
528 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
529 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
530 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
531 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
532 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
533 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
534 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
535 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
536 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
537 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
538 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
539 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
540 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
541 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
543 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
544 for a disassembler option of `booke', `booke32' or `booke64' to enable
545 BookE support in the disassembler.
547 2001-10-12 John Healy <jhealy@redhat.com>
549 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
550 for the length when extracting the base part of the insn.
552 2001-10-09 Bruno Haible <haible@clisp.cons.org>
554 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
555 regular expression. Fix some formatting problems.
556 * fr30-asm.c: Regenerate.
557 * openrisc-asm.c: Regenerate.
558 * m32r-asm.c: Regenerate.
560 2001-10-09 Christian Groessler <cpg@aladdin.de>
562 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
563 of indirect register memory accesses to be same format the
566 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
568 * sh-opc.h: Fix encoding of least significant nibble of the
569 DSP single data transfer instructions.
571 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
574 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
576 * cgen-asm.in: Fix compile time warning messages in generated
578 * cgen-dis.in: The same.
579 * cgen-ibld.in: The same.
580 * fr30-asm.c: Regenerate.
581 * fr30-desc.c: Regenerate.
582 * fr30-dis.c: Regenerate.
583 * fr30-ibld.c: Regenerate.
584 * fr30-opc.c: Regenerate.
585 * m32r-asm.c: Regenerate.
586 * m32r-desc.c: Regenerate.
587 * m32r-dis.c: Regenerate.
588 * m32r-ibld.c: Regenerate.
589 * m32r-opc.c: Regenerate.
590 * m32r-opinst.c Regenerate.
591 * openrisc-asm.c: Regenerate.
592 * openrisc-desc.c: Regenerate.
593 * openrisc-dis.c: Regenerate.
594 * openrisc-ibld.c: Regenerate.
595 * openrisc-opc.c: Regenerate.
596 * openrisc-opc.h: Regenerate.
597 * Makefile.in: Regenerate.
598 * po/POTFILES.in: Regenerate.
599 * po/opcodes.pot: Regenerate.
601 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
603 * arm-opc.h (arm_opcodes): Add cirrus insns.
605 * arm-dis.c (print_insn_arm): Add 'I' case.
607 2001-10-03 Alan Modra <amodra@bigpond.net.au>
609 * po/POTFILES.in: Regenerate.
610 * configure: Regenerate.
612 2001-10-02 Alan Modra <amodra@bigpond.net.au>
614 * Makefile.am (Makefile): Depend on bfd/configure.in.
616 * Makefile.in: Regenerate.
618 2001-09-30 John Healy <jhealy@redhat.com>
620 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
621 calls to cgen_get_insn_value and cgen_put_insn_value calls.
622 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
624 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
626 * Makefile.am: Update dependencies with "make dep-am".
627 * Makefile.in: Regenerate.
629 2001-09-26 Alan Modra <amodra@bigpond.net.au>
631 * arc-dis.c: Formatting fixes.
632 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
634 2001-09-21 Bruno Haible <haible@clisp.cons.org>
636 * arc-dis.c: Don't include <ctype.h>.
637 * openrisc-desc.c: Likewise.
638 * openrisc-ibld.c: Likewise.
640 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
642 * fr30-opc.c: Fix compile time warning messages.
643 * i370-opc.c: Fix compile time warning messages.
644 * i960-dis.c: Fix compile time warning messages.
645 * m32r-asm.c: Fix compile time warning messages.
646 * m32r-desc.c: Fix compile time warning messages.
647 * m32r-dis.c: Fix compile time warning messages.
648 * m32r-ibld.c: Fix compile time warning messages.
649 * m32r-opc.c: Fix compile time warning messages.
650 * m32r-opinst.c: Fix compile time warning messages.
651 * ns32k-dis.c: Fix compile time warning messages.
652 * openrisc-asm.c: Fix compile time warning messages.
653 * openrisc-desc.c: Fix compile time warning messages.
654 * openrisc-dis.c: Fix compile time warning messages.
655 * openrisc-ibld.c: Fix compile time warning messages.
656 * openrisc-opc.c: Fix compile time warning messages.
657 * pdp11-dis.c: Fix compile time warning messages.
658 * tic54x-dis.c: Fix compile time warning messages.
659 * v850-opc.c: Fix compile time warning messages.
660 * vax-dis.c: Fix compile time warning messages.
661 * w65-opc.h: Fix compile time warning messages.
662 * z8k-opc.h: Fix compile time warning messages.
663 * z8kgen.c: Fix compile time warning messages.
665 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
667 * arm-dis.c: Fix compile time warning messages.
668 * cgen-asm.c: Fix compile time warning messages.
669 * cgen-dis.c: Fix compile time warning messages.
670 * cris-dis.c: Fix compile time warning messages.
671 * d10v-dis.c: Fix compile time warning messages.
672 * fr30-asm.c: Fix compile time warning messages.
673 * fr30-desc.c: Fix compile time warning messages.
674 * fr30-dis.c: Fix compile time warning messages.
675 * fr30-ibld.c: Fix compile time warning messages.
677 2001-09-18 Bruno Haible <haible@clisp.cons.org>
679 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
680 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
681 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
682 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
684 (cgen_keyword_add): Use ISALNUM instead of isalnum.
685 (hash_keyword_name): Use TOLOWER instead of tolower.
686 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
687 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
689 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
690 * fr30-desc.c: Don't include <ctype.h>.
691 * fr30-ibld.c: Likewise.
692 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
693 (load_insn_classes, parse_resource_users, load_depfile): Use
694 ISSPACE instead of isspace.
695 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
696 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
698 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
699 * m32r-desc.c: Don't include <ctype.h>.
700 * m32r-ibld.c: Likewise.
701 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
702 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
704 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
706 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
708 * Makefile.am: Add rules and dependencies to create the s/390 opcode
709 table out of s390-opc.txt automatically.
710 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
711 * s390-mkopc.c (dumpTable): Change output to create a complete file.
712 * s390-opc.c: New improved opcode format macros and remove the
713 pregenerated opcode table.
714 * s390-opc.txt: Adapt to new improved opcode format macros.
716 2001-09-14 David Schleef <ds@schleef.org>
718 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
720 2001-09-04 Alan Modra <amodra@bigpond.net.au>
722 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
723 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
725 2001-08-31 Eric Christopher <echristo@redhat.com>
726 Jason Eckhardt <jle@redhat.com>
728 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
729 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
732 2001-08-31 Andreas Jaeger <aj@suse.de>
734 * tic54x-opc.c: Add default initializers to avoid warnings.
736 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
737 * arc-ext.c: Likewise.
739 2001-08-28 matthew gren <mrg@redhat.com>
741 * ppc-opc.c (icbt): Order correctly.
743 2001-08-27 David Edelsohn <dje@watson.ibm.com>
744 Torbjorn Granlund <tege@swox.com>
746 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
748 (insert_ds): Complain if not a multiple of 4.
750 (XSYNC_MASK): Define.
751 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
752 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
754 2001-08-26 Andreas Jaeger <aj@suse.de>
756 * h8500-opc.h: Add default initializers to h8500_table to shut up
759 2001-08-25 Andreas Jaeger <aj@suse.de>
761 * tic54x-dis.c: Add unused attributes where needed.
763 * z8k-dis.c (output_instr): Add unused attribute.
765 * h8300-dis.c: Add missing prototypes.
766 (bfd_h8_disassemble): Make static.
768 * cris-dis.c: Add missing prototype.
769 * h8500-dis.c: Likewise.
770 * m68hc11-dis.c: Likewise.
771 * pj-dis.c: Likewise.
772 * tic54x-dis.c: Likewise.
773 * v850-dis.c: Likewise.
774 * vax-dis.c: Likewise.
775 * w65-dis.c: Likewise.
776 * z8k-dis.c: Likewise.
778 * d10v-dis.c: Add missing prototype.
779 (dis_long): Remove unused variable.
780 (dis_2_short): Likewise.
782 * sh-dis.c: Add missing prototypes.
783 * v850-opc.c: Likewise.
784 Add unused attributes where needed.
786 * ns32k-dis.c: Add missing prototypes.
787 (bit_extract_simple): Remove unused variable.
789 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
791 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
792 branch instructions for gcc 3.0.
793 * opcodes/s390-opc.txt: Likewise.
795 2001-08-21 Andreas Jaeger <aj@suse.de>
797 * i960-dis.c: Add parameters for prototypes
798 (ctrl): Add unused attributes.
802 * mips-dis.c: Add missing prototypes.
803 * a29k-dis.c: Likewise.
804 * arc-dis.c: Likewise.
805 * ia64-opc.c: Likewise.
807 * s390-dis.c: Add missing prototypes.
808 (init_disasm): Remove unused attribute since the parameter is
811 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
813 * mips-opc.c (M1): Define. Reformatted Code.
814 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
817 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
819 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
820 the corresponding non-likely insn is in MIPS I.
822 2001-08-13 Kazu Hirata <kazu@hxi.com>
824 * mcore-dis.c: Fix formatting.
825 * mips-dis.c: Likewise.
826 * pj-dis.c: Likewise.
827 * z8k-dis.c: Likewise.
829 2001-08-12 Richard Henderson <rth@redhat.com>
831 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
832 to *VALUEP. Regenerate all cgen files.
834 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
836 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
838 * mips-opc.c (G6): Undefine.
839 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
840 as the first "move" alternative.
842 2001-08-10 Andreas Jaeger <aj@suse.de>
844 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
846 * configure: Regenerate.
848 2001-08-10 Alan Modra <amodra@bigpond.net.au>
850 * ppc-opc.c: Revert 2001-08-08.
852 2001-08-09 Alan Modra <amodra@bigpond.net.au>
854 * dis-buf.c (generic_strcat_address): Add missing prototype.
855 #if 0 the functions as it is unused.
857 2001-08-08 Alan Modra <amodra@bigpond.net.au>
859 1999-10-25 Torbjorn Granlund <tege@swox.com>
860 * ppc-opc.c: Include "bfd.h".
861 (powerpc_operands): Add new field for reloc type.
863 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
865 * mips-dis.c (print_insn_arg): Don't use software integer registers
866 for coprocessor registers.
867 (get_mips_isa): Removed.
868 (is_newabi): New function, checks if NewABI is used.
869 (_print_insn_mips): Get distinction between old ABI and new ABI right.
871 2001-08-01 Christian Groessler <cpg@aladdin.de>
873 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
874 get stderr definition.
875 (internal, gas): Removed warnings.
876 (gas): Create a correct final entry for created array.
877 * z8k-opc.h: Recreated with new z8kgen.
879 2001-07-28 Kazu Hirata <kazu@hxi.com>
881 * i386-dis.c: Fix formatting.
883 2001-07-28 Matthias Kramm <kramm@quiss.org>
885 * i386-dis.c: Change formatting conventions for architecture
886 i386:intel to better match the format of various intel i386
887 assemblers, like nasm, tasm or masm.
889 2001-07-24 Alan Modra <amodra@bigpond.net.au>
891 * Makefile.am: Update dependencies with "make dep-am".
892 * Makefile.in: Regenerate
894 2001-07-24 Kazu Hirata <kazu@hxi.com>
896 * alpha-dis.c: Fix formatting.
897 * cris-dis.c: Likewise.
898 * d10v-dis.c: Likewise.
899 * d30v-dis.c: Likewise.
900 * m10300-dis.c: Likewise.
901 * tic54x-dis.c: Likewise.
903 2001-07-23 Kazu Hirata <kazu@hxi.com>
905 * m68k-dis.c: Fix formatting.
906 * pj-dis.c: Likewise.
907 * s390-dis.c: Likewise.
908 * z8k-dis.c: Likewise.
910 2001-07-21 Chris Demetriou <cgd@broadcom.com>
912 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
913 into the rest of the surrounding definitions.
915 2001-07-18 Alan Modra <amodra@bigpond.net.au>
917 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
918 for lgdt, lidt, sgdt, sidt.
920 2001-07-13 Philip Blundell <philb@gnu.org>
922 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
924 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
926 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
928 (@arch@_cgen_build_insn_regex): New routine from Graydon.
929 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
930 to verify if it is worth parsing the insn as insn "x". Also update
931 error message when insn is not a recognized format of the insn vs
932 when the insn is completely unrecognized.
934 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
936 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
938 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
939 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
941 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
943 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
944 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
945 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
947 2001-07-05 Ben Elliston <bje@redhat.com>
949 * Makefile.am (CPUDIR): Define.
950 (stamp-m32r): Update dependencies.
952 (stamp-openrisc): Ditto.
953 * Makefile.in: Regenerate.
955 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
957 * ppc-opc.c: Fix encoding of 'clf' instruction.
959 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
961 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
963 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
965 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
966 * cgen-opc.c (cgen_keyword_add): Ignore special first
967 character when building nonalpha_chars field.
969 2001-06-24 Ben Elliston <bje@redhat.com>
971 * m88k-dis.c: Format to conform to GNU coding standards.
973 2001-06-23 Andreas Jaeger <aj@suse.de>
975 * disassemble.c (disassembler_usage): Add unused attribute.
977 2001-06-22 Eric Christopher <echristo@redhat.com>
979 * mips-opc.c: Move prefx to start of the table.
981 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
983 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
986 2001-06-22 Pauli <pauli@moreton.com.au>
988 * m68k-opc.c: Add wdebug instruction.
990 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
992 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
994 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
996 * cgen-asm.c (cgen_parse_keyword): When looking for the
997 boundaries of a keyword, allow any special characters
998 that are actually in one of the allowed keyword.
999 * cgen-opc.c (cgen_keyword_add): Add any special characters
1000 to the nonalpha_chars field.
1002 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1004 * s390-opc.c: Add lgh instruction.
1005 * s390-opc.txt: Likewise.
1007 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1009 * i386-dis.c: Group function prototypes in one place.
1010 (FLOATCODE): Redefine as 1.
1011 (USE_GROUPS): Redefine as 2.
1012 (USE_PREFIX_USER_TABLE): Redefine as 3.
1013 (X86_64_SPECIAL): Define as 4.
1014 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1015 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1016 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1017 (dis386): New table combining above four tables.
1018 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1019 (dis386_twobyte): New table combining above two tables.
1020 (x86_64_table): New table to handle x86_64.
1022 (float_mem_att, float_mem_intel): Delet.
1023 (float_mem): New table combining above two tables.
1024 (print_insn_i386): Modify for above.
1025 (dofloat): Likewise.
1026 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1027 Return 0 on success, 1 if no valid alternative.
1028 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1029 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1030 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1031 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1033 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1034 (OP_I64): If not 64-bit mode, call OP_I.
1035 OP_OFF64): If not 64-bit mode, call OP_OFF.
1036 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1037 'ignore'/'ignored' to 'bytemode'.
1039 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1041 * configure.in: Sort 'ta' case statement.
1042 * configure: Regenerate.
1044 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1046 (disx86_64_att): Likewise.
1047 (dis386_twobyte_att): Likewise.
1048 (print_insn_i386): Don't print branch hints as a prefix.
1049 (putop): 'H' macro prints branch hints.
1050 (get64): Kill compile warnings.
1052 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1054 * sh-opc.h (sh_table): Don't use empty initializers.
1056 2001-06-06 Christian Groessler <cpg@aladdin.de>
1058 * z8k-dis.c: Fix formatting.
1059 (unpack_instr): Remove unused cases in switch statement. Add
1060 safety abort() in default case.
1061 (unparse_instr): Add safety abort() in default case.
1063 2001-06-06 Peter Jakubek <pjak@snafu.de>
1065 * m68k-dis.c (print_insn_m68k): Fix typo.
1066 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1067 mcf (ColdFire) div, rem and moveb instructions.
1069 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1071 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1072 (cond_jump_mode, loop_jcxz_mode): Define.
1073 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1074 appropriate, and 'F' suffix to loop insns.
1075 (disx86_64_att): Likewise.
1076 (dis386_twobyte_att): Likewise.
1077 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1078 Output data size prefix for long conditional jumps. Output cs and
1080 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1081 (OP_J): Don't make PREFIX_DATA used.
1083 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1085 * sh-opc.h (sh_table): Complete last element entry to avoid
1088 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1090 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1092 2001-05-23 Alan Modra <amodra@one.net.au>
1094 * arc-opc.c: Whitespace changes.
1096 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1098 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1101 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1103 * cgen-dis.in (extract_normal): Complete support for min<base case.
1105 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1107 * mips-dis.c (INSNLEN): Rename MAXLEN.
1108 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1109 (print_insn_arg): Remove $ prefix of register names.
1110 (set_mips_isa_type): Remove.
1111 (mips_isa_type): New function.
1112 (get_mips_isa): New Function.
1113 (print_insn_mips): Rename _print_insn_mips.
1114 (_print_insn_mips): New function, contains code which was
1115 duplicated in print_insn_big_mips and print_insn_little_mips.
1116 (print_insn_big_mips): Moved code to _print_insn_mips.
1117 (print_insn_little_mips): Likewise.
1118 (print_mips16_insn_arg): Remove $ prefix of register names.
1119 Print error message before abort.
1121 2001-05-14 J.T. Conklin <jtc@redback.com>
1123 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1124 simplified mnemonics used for setting PPC750-specific special
1127 2001-05-12 H.J. Lu <hjl@gnu.org>
1129 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1132 2001-05-12 Peter Targett <peter.targett@arccores.com>
1134 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1135 register to r/w. Formatting fixes throughout file.
1137 2001-05-12 Alan Modra <amodra@one.net.au>
1139 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1141 (twobyte_has_modrm): Update table.
1142 (need_modrm): Give it file scope.
1143 (MODRM_CHECK): Define.
1144 (dofloat): Use MODRM_CHECK.
1149 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1151 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1152 even at end of a section.
1153 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1154 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1156 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1158 * disassemble.c (disassembler_usage): Remove unused attribute.
1160 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1162 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1164 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1166 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1167 assume incoming buffer already has the base insn loaded. Handle
1168 smaller-than-base instructions for variable-length case.
1170 2001-05-04 Alan Modra <amodra@one.net.au>
1172 * i386-dis.c (Ev, Ed): Remove duplicate define.
1175 (OP_XS): New function.
1176 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1178 (dis386_twobyte_intel): Likewise.
1179 (prefix_user_table): Use MS for maskmovq operand.
1181 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1183 * Makefile.am: Add OpenRISC target.
1184 * Makefile.in: Regenerated.
1186 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1188 * configure.in (bfd_openrisc_arch): Add target.
1189 * configure: Regenerated.
1191 * openrisc-asm.c: New file.
1192 * openrisc-desc.c: Likewise.
1193 * openrisc-desc.h: Likewise.
1194 * openrisc-dis.c: Likewise.
1195 * openrisc-ibld.c: Likewise.
1196 * openrisc-opc.c: Likewise.
1197 * openrisc-opc.h: Likewise.
1199 2001-04-24 Christian Groessler <cpg@aladdin.de>
1201 * z8k-dis.c: add names of control registers (ctrl_names);
1202 (seg_length): provides instruction length fixup for segmented
1203 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1204 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1205 (unparse_intr): handle CLASS_PR, print addresses without '#'
1206 * z8k-opc.h: re-created with new z8kgen
1207 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1208 entries for ldctl/ldctlb instruction
1210 2001-04-06 Andreas Jaeger <aj@suse.de>
1212 * i386-dis.c: Add ffreep instruction.
1214 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1216 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1218 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1220 * i386-dis.c (PREGRP25): Define.
1221 (dis386_twobyte_att): Use here in place of "movntq" entry.
1222 (dis386_twobyte_intel): Likewise.
1223 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1225 (dis386_twobyte_att): Use here.
1226 (dis386_twobyte_intel): Likewise.
1227 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1228 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1229 (prefix_user_table): Cosmetic changes to "bad" entries.
1231 2001-03-23 Nick Clifton <nickc@redhat.com>
1233 * mips-opc.c: Remove extraneous whitespace.
1234 * mips-dis.c: Remove extraneous whitespace.
1236 2001-03-22 Ben Elliston <bje@redhat.com>
1238 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1239 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1240 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1241 to allay a compiler warning.
1243 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1245 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1246 (dis386_twobyte_intel): Likewise.
1247 (twobyte_has_modrm): Set entry for paddq, psubq.
1249 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1251 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1252 determination via CGEN_COMPUTE_MACH.
1253 * fr30-desc.c: Regenerate.
1254 * fr30-dis.c: Regenerate.
1255 * fr30-opc.h: Regenerate.
1256 * m32r-desc.c: Regenerate.
1257 * m32r-dis.c: Regenerate.
1258 * m32r-opc.h: Regenerate.
1259 * m32r-opinst.c: Regenerate.
1261 2001-03-20 H.J. Lu <hjl@gnu.org>
1263 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1264 * configure: Rebuild.
1266 2001-03-19 Jim Wilson <wilson@redhat.com>
1268 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1269 notestr if larger than xsect.
1270 (in_class): Handle format M5.
1271 * ia64-asmtab.c: Regnerate.
1273 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1275 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1276 has more than one byte left to read.
1278 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1280 * s390-opc.c: Add new opcodes. Smooth out formatting.
1281 * s390-opc.txt: Add new opcodes.
1283 2001-03-06 Nick Clifton <nickc@redhat.com>
1285 * arm-dis.c (print_insn_thumb): Compute destination address
1286 of BLX(1) instruction by taking bit 1 from PC and not from bit
1289 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1291 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1292 so command line switches will work.
1294 2001-03-05 Dave Brolley <brolley@redhat.com>
1296 * fr30-asm.c: Regenerate.
1297 * fr30-desc.c: Regenerate.
1298 * fr30-desc.h: Regenerate.
1299 * fr30-dis.c: Regenerate.
1300 * fr30-ibld.c: Regenerate.
1301 * fr30-opc.c: Regenerate.
1302 * fr30-opc.h: Regenerate.
1303 * m32r-asm.c: Regenerate.
1304 * m32r-desc.c: Regenerate.
1305 * m32r-desc.h: Regenerate.
1306 * m32r-dis.c: Regenerate.
1307 * m32r-ibld.c: Regenerate.
1308 * m32r-opc.c: Regenerate.
1309 * m32r-opc.h: Regenerate.
1310 * m32r-opinst.c: Regenerate.
1312 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1314 * m68k-opc.c: fix cpushl according to Motorola. Enable
1315 bunch of instructions for Coldfire 5407 and add all new.
1317 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1319 * configure.in (BFD_VERSION): Do without grep.
1320 * configure: Regenerate.
1321 * Makefile.am: Run "make dep-am".
1322 * Makefile.in: Regenerate.
1324 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1326 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1327 * ia64-asmtab.c: Regenerate.
1329 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1331 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1332 separate variants: one for IMM22 and the other for IMM14.
1333 * ia64-asmtab.c: Regenerate.
1335 2001-02-21 Greg McGary <greg@mcgary.org>
1337 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1339 2001-02-20 H.J. Lu <hjl@gnu.org>
1341 * Makefile.am (ia64-ic.tbl): Remove the target.
1342 (ia64-raw.tbl): Likewise.
1343 (ia64-waw.tbl): Likewise.
1344 (ia64-war.tbl): Likewise.
1345 (ia64-asmtab.c): Generate it in the source directory.
1346 * Makefile.in: Regenerated.
1348 2001-02-18 lars brinkhoff <lars@nocrew.org>
1350 * Makefile.am: Add PDP-11 target.
1351 * configure.in: Likewise.
1352 * disassemble.c: Likewise.
1353 * pdp11-dis.c: New file.
1354 * pdp11-opc.c: New file.
1356 2001-02-14 Jim Wilson <wilson@redhat.com>
1358 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1359 * ia64-asmtab.c: Regenerate.
1361 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1363 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1367 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1369 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1370 the following instruction not of the jump itself for the jump
1372 (print_mips16_insn_arg): Likewise.
1374 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1376 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1378 * Makefile.in: Regenerate.
1380 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1382 * Makefile.am: Add linux target for S/390.
1383 * Makefile.in: Likewise.
1384 * configure.in: Likewise.
1385 * disassemble.c: Likewise.
1386 * s390-dis.c: New file.
1387 * s390-mkopc.c: New file.
1388 * s390-opc.c: New file.
1389 * s390-opc.txt: New file.
1391 2001-02-05 Jim Wilson <wilson@redhat.com>
1393 * ia64-asmtab.c: Revert 2000-12-16 change.
1395 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1397 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1398 * m32r-desc.h: Regenerate.
1400 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1402 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1403 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1405 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1407 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1409 2001-01-13 Nick Clifton <nickc@redhat.com>
1411 * disassemble.c: Remove spurious white space.
1413 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1415 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1418 2001-01-11 Peter Targett <peter.targett@arccores.com>
1420 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1421 * Makefile.am (C_FILES): Add arc-ext.c.
1422 (ALL_MACHINES) Add arc-ext.lo.
1423 (INCLUDES) Add opcode directory to list.
1424 New dependency entry for arc-ext.lo.
1425 * disassemble.c (disassembler): Correct call to
1426 arc_get_disassembler.
1427 * arc-opc.c: New update for ARC, including full base
1428 instructions for ARC variants.
1429 * arc-dis.h, arc-dis.c: New update for ARC, including
1430 extensibility functionality.
1431 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1433 2001-01-10 Jan Hubicka <jh@suse.cz>
1435 * i386-dis.c (PREGRP15 - PREGRP24): New.
1436 (dis386_twobyt): Add SSE2 instructions.
1437 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1438 (twobyte_uses_f3_prefix): ... this one.
1439 (grps): Add SSE instructions.
1440 (prefix_user_table): Add two new slots; add SSE2 instructions.
1441 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1442 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1443 to prefix_user_table.
1444 (OP_E): Accept mfence and lfence as well.
1445 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1446 (OP_XMM): Support REX extensions.
1450 2001-01-09 Nick Clifton <nickc@redhat.com>
1452 * arm-dis.c (print_insn): Set pc to zero for instructions with
1453 a reloc associated with them.
1455 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1457 * cgen-asm.in (parse_insn_normal): Changed syn to be
1458 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1459 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1460 to '\0' to use 0 instead.
1461 * cgen-dis.in (print_insn_normal): Ditto.
1462 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1464 2001-01-05 Jan Hubicka <jh@suse.cz>
1466 * i386-dis.c: Add x86_64 support.
1467 (rex): New static variable.
1468 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1469 (USED_REX): New macro.
1470 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1471 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1472 (OP_REG, OP_OFF): Declare.
1473 (get64, get32, get32s): New functions.
1474 (r??_reg): New constants.
1475 (dis386_att): Change templates of instruction implicitly promoted
1476 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1478 (dis386_intel): Likewise.
1479 (dixx86_64_att): New table based on dis386_att.
1480 (dixx86_64_intel): New table based on dis386_intel.
1481 (names64, names8rex): New global variable.
1482 (names32, names16): Add extended registers.
1483 (prefix_user_t): Recognize rex prefixes.
1484 (prefix_name): Print REX prefixes nicely.
1485 (op_riprel): New global variable.
1486 (start_pc): Set type to bfd_vma.
1487 (print_insn_i386): Detect the 64bit mode and use proper table;
1488 move ckprefix after initializing the buffer; output unused rex prefixes;
1489 output information about target of RIP relative addresses.
1490 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1491 (print_operand_value): New function.
1492 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1493 REX prefix and new modes.
1494 (get64, get32s): New.
1495 (get32): Return bfd_signed_vma type.
1496 (set_op): Initialize the op_riprel.
1497 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1499 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1501 cgen-dis.in (read_insn): Use bfd_get_bits()
1503 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1505 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1506 (hash_insn_list): Likewise
1507 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1508 (extract_1): Use bfd_get_bits().
1509 (extract_normal): Apply sign extension to both extraction
1511 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1512 (cgen_put_insn_value): Use bfd_put_bits()
1514 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1516 * cgen-asm.in (parse_insn_normal): Print better error message for
1517 instructions with missing operands.
1519 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1521 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1523 2000-12-16 Nick Clifton <nickc@redhat.com>
1525 * Makefile.in: Regenerate.
1526 * aclocal.m4: Regenerate.
1527 * config.in: Regenerate.
1528 * configure.in: Add spacing.
1529 * configure: Regenerate.
1530 * ia64-asmtab.c: Regenerate.
1531 * po/opcodes.pot: Regenerate.
1533 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1535 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1536 error messages over later parse-time ones.
1538 2000-12-12 Jim Wilson <wilson@redhat.com>
1540 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1542 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1543 (print_dependency_table): Print NULL if semantics field not set.
1544 (insert_opcode_dependencies): Mark cmp parameter as unused.
1545 (print_main_table): Use fprintf_vma to print long long fields.
1546 (main): Mark argv paramter as unused. Convert to old style definition.
1547 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1548 * ia64-asmtab.c: Regnerate.
1550 2000-12-09 Nick Clifton <nickc@redhat.com>
1552 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1555 * fr30-dis.c: Regenerate.
1557 2000-12-08 Peter Targett <peter.targett@arccores.com>
1559 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1560 * Makefile.am (C_FILES): Add arc-ext.c.
1561 (ALL_MACHINES) Add arc-ext.lo.
1562 (INCLUDES) Add opcode directory to list.
1563 New dependency entry for arc-ext.lo.
1564 * disassemble.c (disassembler): Correct call to
1565 arc_get_disassembler.
1566 * arc-opc.c: New update for ARC, including full base
1567 instructions for ARC variants.
1568 * arc-dis.h, arc-dis.c: New update for ARC, including
1569 extensibility functionality.
1570 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1572 2000-12-03 Chris Demetriou cgd@sibyte.com
1574 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1575 MOD_HILO, and MOD_LO macros.
1577 * mips-opc.c (M1, M2): Delete.
1578 (mips_builtin_opcodes): Remove all uses of M1.
1580 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1581 instructions take "G" format second operands and use the
1583 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1585 Delete "sel" code operands from mfc1 and mtc1.
1586 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1589 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1590 Chris Demetriou cgd@sibyte.com
1592 * mips-opc.c (mips_builtin_opcodes): Finish additions
1593 for MIPS32 support, and clean up existing entries for
1594 aesthetics, consistency with the MIPS32 ISA, and
1595 with consistency the rest of the table.
1597 2000-12-01 Nick Clifton <nickc@redhat.com>
1599 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1602 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1604 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1605 specifiers. Update 'B' for new constant names, and remove
1607 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1608 near the top of the array, so they are disassembled properly.
1609 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1610 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1611 specifier. Add 'H' format specifier variants for "mfc1,"
1612 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1613 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1614 "wait" variant which uses 'J' operand specifier.
1616 * mips-dis.c (set_mips_isa_type): Update to use
1617 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1618 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1619 * mips-opc.c (I32): New constant for instructions added in
1622 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1624 * mips-dis.c (set_mips_isa_type): Add cases for
1625 bfd_mach_mips5 and bfd_mach_mips64.
1626 * mips-opc.c (I64): New definitions.
1628 * mips-dis.c (set_mips_isa_type): Add case for
1631 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1633 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1634 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1635 Initialize variable dc to NULL.
1636 (print_insn_shx): Remove unused label d_reg_n.
1638 2000-11-24 Nick Clifton <nickc@redhat.com>
1640 * arm-opc.h: Add new opcode formatting parameter 'B'.
1641 (arm_opcodes): Add XScale, v5, and v5te instructions.
1642 (thumb_opcodes): Add v5t instructions.
1644 * arm-dis.c (print_insn_arm): Handle new 'B' format
1646 (print_insn_thumb): Decode BLX(1) instruction.
1648 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1650 * mips-opc.c: Fix file header comment.
1652 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1654 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1655 print_insn_cris_with_register_prefix.
1657 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1659 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1661 2000-11-07 Matthew Green <mrg@redhat.com>
1663 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1664 must be loaded there in their entirety.
1666 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1668 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1669 (compute_arch_mask): Add v8plusb and v9b machines.
1670 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1671 * sparc-opc.c: Support for Cheetah instruction set.
1672 (prefetch_table): Add #invalidate.
1674 2000-10-16 Nick Clifton <nickc@redhat.com>
1676 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1678 2000-10-06 Dave Brolley <brolley@redhat.com>
1680 * fr30-desc.h: Regenerate.
1681 * m32r-desc.h: Regenerate.
1682 * m32r-ibld.c: Regenerate.
1684 2000-10-05 Jim Wilson <wilson@redhat.com>
1686 * ia64-ic.tbl: Update from Intel.
1687 * ia64-asmtab.c: Regenerate.
1689 2000-10-04 Kazu Hirata <kazu@hxi.com>
1691 * ia64-gen.c: Convert C++-style comments to C-style comments.
1692 * tic54x-dis.c: Likewise.
1694 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1696 Changes to add dollar prefix to registers for files where user symbols
1697 don't have a leading underscore. Fix formatting.
1698 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1699 (format_reg): Add parameter with_reg_prefix. All callers changed.
1700 (print_with_operands): Ditto.
1701 (print_insn_cris_generic): Renamed from print_insn_cris, add
1702 parameter with_reg_prefix.
1703 (print_insn_cris_with_register_prefix,
1704 print_insn_cris_without_register_prefix, cris_get_disassembler):
1706 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1708 2000-09-22 Jim Wilson <wilson@redhat.com>
1710 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1711 gt, ge, ngt, and nge.
1712 * ia64-asmtab.c: Regenerate.
1714 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1715 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1716 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1717 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1718 * ia64-asmtab.c: Regnerate.
1720 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1722 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1723 Add mfc0 and mtc0 with sub-selection values.
1724 Add clo and clz opcodes.
1725 Add msub and msubu instructions for MIPS32.
1726 Add madd/maddu aliases for mad/madu for MIPS32.
1727 Support wait, deret, eret, movn, pref for MIPS32.
1728 Support tlbp, tlbr, tlbwi, tlbwr.
1731 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1732 (print_insn_arg): Handle 'H' args.
1733 (set_mips_isa_type): Recognize 4K.
1734 Use CPU_* defines instead of hardcoded numbers.
1736 2000-09-11 Catherine Moore <clm@redhat.com>
1738 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1739 (d30v_format_tab): Use Rb2 for modinc and moddec.
1741 2000-09-07 Catherine Moore <clm@redhat.com>
1743 * d30v-opc.c (d30v_format_tab): Use format Ra for
1746 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1748 * configure: Rebuilt with new libtool.m4.
1750 2000-09-05 Nick Clifton <nickc@redhat.com>
1752 * configure: Regenerate.
1753 * po/opcodes.pot: Regenerate.
1755 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1757 * acinclude.m4: Include libtool and gettext macros from the
1759 * aclocal.m4, configure: Rebuilt.
1761 2000-08-30 Kazu Hirata <kazu@hxi.com>
1763 * tic80-dis.c: Fix formatting.
1765 2000-08-29 Kazu Hirata <kazu@hxi.com>
1767 * w65-dis.c: Fix formatting.
1769 2000-08-28 Mark Hatle <mhatle@mvista.com>
1771 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1772 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1773 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1774 instructions. Added extended mnemonic mftbl as defined in the
1775 405GP manual for all PPCs.
1777 2000-08-28 Jim Wilson <wilson@redhat.com>
1779 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1780 call. Change last goto to use failed instead of done.
1782 2000-08-28 Dave Brolley <brolley@redhat.com>
1784 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1785 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1786 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1787 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1788 * cgen-dis.in (read_insn): New static function.
1789 (print_insn): Use read_insn to read the insn into the buffer and set
1791 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1793 * fr30-asm.c: Regenerated.
1794 * fr30-desc.c: Regenerated.
1795 * fr30-desc.h: Regenerated.
1796 * fr30-dis.c: Regenerated.
1797 * fr30-ibld.c: Regenerated.
1798 * fr30-opc.c: Regenerated.
1799 * fr30-opc.h: Regenerated.
1800 * m32r-asm.c: Regenerated.
1801 * m32r-desc.c: Regenerated.
1802 * m32r-desc.h: Regenerated.
1803 * m32r-dis.c: Regenerated.
1804 * m32r-ibld.c: Regenerated.
1805 * m32r-opc.c: Regenerated.
1807 2000-08-28 Kazu Hirata <kazu@hxi.com>
1809 * tic30-dis.c: Fix formatting.
1811 2000-08-27 Kazu Hirata <kazu@hxi.com>
1813 * sh-dis.c: Fix formatting.
1815 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1817 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1819 2000-08-24 Kazu Hirata <kazu@hxi.com>
1821 * z8k-dis.c: Fix formatting.
1823 2000-08-16 Jim Wilson <wilson@redhat.com>
1825 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1826 break, mov-immediate, nop.
1827 * ia64-opc-f.c: Delete fpsub instructions.
1828 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1829 address operand. Rewrite using macros to avoid long lines.
1830 * ia64-opc.h (POSTINC): Define.
1831 * ia64-asmtab.c: Regenerate.
1833 2000-08-15 Jim Wilson <wilson@redhat.com>
1835 * ia64-ic.tbl: Add missing entries.
1837 2000-08-08 Jason Eckhardt <jle@redhat.com>
1839 * i860-dis.c (print_br_address): Change third argument from int
1842 2000-08-07 Richard Henderson <rth@redhat.com>
1844 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1845 for MLI templates. Handle IA64_OPND_TGT64.
1847 2000-08-04 Ben Elliston <bje@redhat.com>
1849 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1850 * cgen.sh: Likewise.
1852 2000-08-02 Jim Wilson <wilson@redhat.com>
1854 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1856 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1858 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1859 Change return type from void to int. Check the combination
1860 of operands, return 1 if valid. Fix to avoid BUF overflow.
1861 Report undefined combinations of operands in COMMENT.
1862 Report internal errors to stderr. Output the adiw/sbiw
1863 constant operand in both decimal and hex.
1864 (print_insn_avr): Disassemble ldd/std with displacement of 0
1865 as ld/st. Check avr_operand () return value, handle invalid
1866 combinations of operands like unknown opcodes.
1868 2000-07-28 Ben Elliston <bje@redhat.com>
1870 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1871 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1872 * Makefile.in: Regenerate.
1873 * configure.in: Add --enable-cgen-maint option.
1874 * configure: Regenerate.
1876 2000-07-26 Dave Brolley <brolley@redhat.com>
1878 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1879 (cgen_hw_lookup_by_num): Ditto.
1880 (cgen_operand_lookup_by_name): Ditto.
1881 (print_address): Ditto.
1882 (print_keyword): Ditto.
1883 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1885 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1887 (cgen_parse_keyword): Ditto.
1889 2000-07-22 Jason Eckhardt <jle@redhat.com>
1891 * i860-dis.c: New file.
1892 (print_insn_i860): New function.
1893 (print_br_address): New function.
1894 (sign_extend): New function.
1895 (BITWISE_OP): New macro.
1896 (I860_REG_PREFIX): New macro.
1897 (grnames, frnames, crnames): New structures.
1899 * disassemble.c (ARCH_i860): Define.
1900 (disassembler): Add check for bfd_arch_i860 to set disassemble
1901 function to print_insn_i860.
1903 * Makefile.in (CFILES): Added i860-dis.c.
1904 (ALL_MACHINES): Added i860-dis.lo.
1905 (i860-dis.lo): New dependences.
1907 * configure.in: New bits for bfd_i860_arch.
1909 * configure: Regenerated.
1911 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1913 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1914 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1915 (cris-dis.lo, cris-opc.lo): New rules.
1916 * Makefile.in: Rebuild.
1917 * configure.in (bfd_cris_arch): New target.
1918 * configure: Rebuild.
1919 * disassemble.c (ARCH_cris): Define.
1920 (disassembler): Support ARCH_cris.
1921 * cris-dis.c, cris-opc.c: New files.
1922 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1924 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1926 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1927 Reported by Bill Clarke <llib@computer.org>.
1929 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1931 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1932 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1934 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1936 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1937 fput_const, extract_3, extract_5_load, extract_5_store,
1938 extract_5r_store, extract_5R_store, extract_10U_store,
1939 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1940 extract_12, extract_17, extract_22): Prototype.
1941 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1942 shadowing outer block.
1945 2000-07-05 DJ Delorie <dj@redhat.com>
1949 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1951 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1953 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1955 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1956 marked for translation (exception from the usual coding style).
1957 (print_insn_avr): Initialize insn2 to avoid warnings.
1959 2000-07-03 Kazu Hirata <kazu@hxi.com>
1961 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1962 * h8500-dis.c: Fix formatting.
1964 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1966 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1967 (CLEANFILES): Add DEPA.
1968 * Makefile.in: Regenerate.
1970 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1972 * arm-dis.c (regnames): Add an additional register set to match
1973 the set used by GCC. Make it the default.
1975 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1977 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1979 * Makefile.in: Regenerate.
1981 2000-06-20 H.J. Lu <hjl@gnu.org>
1983 * Makefile.am: Rebuild dependency.
1984 * Makefile.in: Rebuild.
1986 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1988 * Makefile.in, configure: regenerate
1989 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1991 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1993 * configure.in: Recognize m68hc12 and m68hc11.
1994 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1995 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1996 and opcode generation for m68hc11 and m68hc12.
1998 2000-06-16 Nick Duffek <nsd@redhat.com>
2000 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2001 bfd_mach_ppc_620 instead of 620.
2003 2000-06-12 Kazu Hirata <kazu@hxi.com>
2005 * h8300-dis.c: Fix formatting.
2006 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2009 2000-06-09 Denis Chertykov <denisc@overta.ru>
2011 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2013 2000-06-07 Denis Chertykov <denisc@overta.ru>
2015 * avr-dis.c: completely rewritten.
2017 2000-06-02 Kazu Hirata <kazu@hxi.com>
2019 * h8300-dis.c: Follow the GNU coding style.
2020 (bfd_h8_disassemble) Fix a typo.
2022 2000-06-01 Kazu Hirata <kazu@hxi.com>
2024 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2025 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2026 correctly. Fix a typo.
2028 2000-05-31 Nick Clifton <nickc@redhat.com>
2030 * opintl.h (_(String)): Explain why dgettext is used instead of
2033 2000-05-30 Nick Clifton <nickc@redhat.com>
2035 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2036 bindtextdomain): Replace defines with those from intl/libgettext.h
2037 to quieten gcc warnings.
2039 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2041 * Makefile.am: Update dependencies with "make dep-am"
2042 * Makefile.in: Regenerate.
2044 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2046 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2047 sign-extending operands.
2049 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2051 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2054 2000-05-21 Nick Clifton <nickc@redhat.com>
2056 * Makefile.am (LIBIBERTY): Define.
2058 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2060 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2061 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2062 (reg_names): Rename to std_reg_names. Change it to a char **
2064 (std_reg_names): New name for reg_names.
2065 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2068 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2070 * fr30-desc.h: Partially regenerated to account for changed
2071 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2072 * m32r-desc.h: Ditto.
2074 2000-05-15 Nick Clifton <nickc@redhat.com>
2076 * arm-opc.h: Use upper case for flasg in MSR and MRS
2077 instructions. Allow any bit to be set in the field_mask of
2078 the MSR instruction.
2080 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2081 field_mask of an MSR instruction.
2083 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2085 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2086 instructions changed to ldrsb/ldrsh.
2088 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2090 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2091 target addresses for 'jal' and 'j'.
2093 2000-05-10 Geoff Keating <geoffk@redhat.com>
2095 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2096 also available in common mode when powerpc syntax is being used.
2098 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2100 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2101 (dummy_print_address): Ditto.
2103 2000-05-04 Timothy Wall <twall@redhat.com>
2105 * tic54x-opc.c: New.
2106 * tic54x-dis.c: New.
2107 * disassemble.c (disassembler): Add ARCH_tic54x.
2108 * configure.in: Added tic54x target.
2110 * Makefile.am: Add tic54x dependencies.
2111 * Makefile.in: Ditto.
2113 2000-05-03 J.T. Conklin <jtc@redback.com>
2115 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2116 vector unit operands.
2117 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2118 unit instruction formats.
2119 (PPCVEC): New macro, mask for vector instructions.
2120 (powerpc_operands): Add table entries for above operand types.
2121 (powerpc_opcodes): Add table entries for vector instructions.
2123 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2124 (print_insn_little_powerpc): Likewise.
2125 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2127 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2129 * configure.in: Add bfd_powerpc_64_arch.
2130 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2133 2000-04-24 Nick Clifton <nickc@redhat.com>
2135 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2138 2000-04-23 Denis Chertykov <denisc@overta.ru>
2140 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2142 (reg_fmul_r): New. Extract source register from FMUL instruction.
2143 (reg_muls_d): New. Extract destination register from MULS instruction.
2144 (reg_muls_r): New. Extract source register from MULS instruction.
2145 (reg_movw_d): New. Extract destination register from MOVW instruction.
2146 (reg_movw_r): New. Extract source register from MOVW instruction.
2147 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2148 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2150 2000-04-22 Timothy Wall <twall@redhat.com>
2152 * ia64-gen.c (general): Add an ordered table of primary
2153 opcode names, as well as priority fields to disassembly data
2154 structures to enforce a preferred disassembly format based on the
2155 ordering of the opcode tables.
2156 (load_insn_classes): Show a useful message if IC tables are missing.
2157 (load_depfile): Ditto.
2158 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2159 distinguish preferred disassembly.
2160 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2161 format. Fix incorrect flag on fma.s/fma.s.s0.
2162 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2163 the highest priority.
2164 * ia64-opc-b.c: Use more abbreviations.
2165 * ia64-asmtab.c: Regenerate.
2167 2000-04-21 Jason Eckhardt <jle@redhat.com>
2169 * hppa-dis.c (extract_16): New function.
2170 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2171 new operand types l,y,&,fe,fE,fx.
2173 2000-04-21 Richard Henderson <rth@redhat.com>
2174 David Mosberger <davidm@hpl.hp.com>
2175 Timothy Wall <twall@redhat.com>
2176 Bob Manson <manson@charmed.cygnus.com>
2177 Jim Wilson <wilson@redhat.com>
2179 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2180 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2181 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2183 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2184 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2185 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2186 * Makefile.in: Rebuild.
2187 * configure Rebuild.
2188 * configure.in (bfd_ia64_arch): New target.
2189 * disassemble.c (ARCH_ia64): Define.
2190 (disassembler): Support ARCH_ia64.
2191 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2192 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2193 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2194 ia64-war.tbl, ia64-waw.tbl: New files.
2196 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2198 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2199 (disassemble): Use them.
2201 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2203 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2204 * Makefile.am: Update dependencies.
2205 * Makefile.in: Regenerate.
2207 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2209 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2210 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2211 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2212 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2213 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2214 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2215 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2216 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2217 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2218 ansidecl.h as sysdep.h includes it.
2220 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2222 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2223 --enable-build-warnings option.
2224 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2225 * Makefile.in, configure: Re-generate.
2227 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2229 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2230 stc GBR,@-<REG_N> is available for arch_sh1_up.
2231 Group parallel processing insn with identical mnemonics together.
2232 Make three-operand psha / pshl come first.
2234 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2236 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2237 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2238 (sh_arg_type): Add A_PC.
2239 (sh_table): Update entries using immediates. Add repeat.
2240 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2241 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2243 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2245 * po/opcodes.pot: Regenerate.
2247 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2248 (DEP): Quote when passing vars to sub-make. Add warning message
2250 (DEP1): Rewrite for "gcc -MM".
2251 (CLEANFILES): Add DEP2.
2252 Update dependencies.
2253 * Makefile.in: Regenerate.
2255 2000-04-03 Denis Chertykov <denisc@overta.ru>
2257 * avr-dis.c: Syntax cleanup.
2258 (add0fff): Print the pc relative address as a signed number.
2259 (add03f8): Likewise.
2261 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2263 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2264 the parameter ATTRIBUTE_UNUSED.
2265 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2267 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2269 * m10300-opc.c: SP-based offsets are always unsigned.
2271 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2273 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2274 [branch always] instead of "undefined".
2276 2000-03-27 Nick Clifton <nickc@redhat.com>
2278 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2279 short instructions, from end of list of long instructions.
2281 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2283 * Makefile.am (CFILES): Add avr-dis.c.
2284 (ALL_MACHINES): Add avr-dis.lo.
2286 2000-03-27 Alan Modra <alan@linuxcare.com>
2288 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2290 (print_insn_avr): Call function via pointer in K&R compatible way.
2291 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2292 add0fff, add03f8): Convert to old style function declaration and
2294 (avrdis_opcode): Add prototype.
2296 2000-03-27 Denis Chertykov <denisc@overta.ru>
2298 * avr-dis.c: New file. AVR disassembler.
2299 * configure.in (bfd_avr_arch): New architecture support.
2300 * disassemble.c: Likewise.
2301 * configure: Regenerate.
2303 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2305 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2307 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2309 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2310 flag to determine if operand is pc-relative.
2312 (d30v_format_table):
2313 (REL6S3): Renamed from IMM6S3.
2314 Added flag OPERAND_PCREL.
2315 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2316 added flag OPERAND_PCREL.
2317 (IMM12S3U): Replaced with REL12S3.
2318 (SHORT_D2, LONG_D): Delay target is pc-relative.
2319 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2320 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2321 using the REL* operands.
2322 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2323 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2324 LONG_Db, using REL* operands.
2325 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2326 (d30v_opcode_table): Use new *r formats.
2328 2000-02-28 Nick Clifton <nickc@redhat.com>
2330 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2331 'signed_overflow_ok_p'.
2333 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2335 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2336 name of the libtool directory.
2337 * Makefile.in: Rebuild.
2339 2000-02-24 Nick Clifton <nickc@redhat.com>
2341 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2342 (cgen_clear_signed_overflow_ok): New function.
2343 (cgen_signed_overflow_ok_p): New function.
2345 2000-02-23 Andrew Haley <aph@redhat.com>
2347 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2348 m32r-ibld.c, m32r-opc.h: Rebuild.
2350 2000-02-23 Linas Vepstas <linas@linas.org>
2352 * i370-dis.c, i370-opc.c: New.
2354 * disassemble.c (ARCH_i370): Define.
2355 (disassembler): Handle it.
2357 * Makefile.am: Add support for Linux/IBM 370.
2358 * configure.in: Likewise.
2360 * Makefile.in: Regenerate.
2361 * configure: Likewise.
2363 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2365 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2366 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2369 2000-02-22 Andrew Haley <aph@redhat.com>
2371 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2373 * mips-opc.c (G6): New define.
2374 (mips_builtin_op): Add "move" definition for -gp32.
2376 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2378 From Grant Erickson <gerickso@Brocade.COM>:
2379 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2381 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2383 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2386 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2388 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2389 (print_insn_ppi): Likewise.
2390 (print_insn_shx): Use info->mach to select appropriate insn set.
2391 Add support for sh-dsp. Remove FD_REG_N support.
2392 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2393 (sh_arg_type): Likewise. Remove FD_REG_N.
2394 (sh_dsp_reg_nums): New enum.
2395 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2396 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2397 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2398 (arch_sh3_dsp_up): Likewise.
2399 (sh_opcode_info): New field: arch.
2400 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2401 D_REG_N. Fill in arch field. Add sh-dsp insns.
2403 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2405 * arm-dis.c: Change flavor name from atpcs-special to
2406 special-atpcs to prevent name conflict in gdb.
2407 (get_arm_regname_num_options, set_arm_regname_option,
2408 get_arm_regnames): New functions. API to access the several
2409 flavor of register names. Note: Used by gdb.
2410 (print_insn_thumb): Use the register name entry from the currently
2411 selected flavor for LR and PC.
2413 2000-02-10 Nick Clifton <nickc@redhat.com>
2415 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2417 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2418 "mulsh.h" instructions.
2419 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2421 (print_insn_mcore): Add support for little endian targets.
2422 Add support for MULSH and OPSR classes.
2424 2000-02-07 Nick Clifton <nickc@redhat.com>
2426 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2427 Previous delat did not take.
2429 2000-02-03 Timothy Wall <twall@redhat.com>
2431 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2432 to adjust target address bounds checking and calculate the
2433 appropriate octet offset into data.
2435 2000-01-27 Nick Clifton <nickc@redhat.com>
2437 * arm-dis.c: (parse_disassembler_option): Rename to
2438 parse_arm_disassembler_option and allow to be exported.
2440 * disassemble.c (disassembler_usage): New function: Print out any
2441 target specific disassembler options.
2442 Call arm_disassembler_options() if the ARM architecture is being
2445 * arm-dis.c (NUM_ELEM): Define this macro if not already
2447 (arm_regname): New struct type for ARM register names.
2448 (arm_toggle_regnames): Delete.
2449 (parse_disassembler_option): Use register name structure.
2450 (print_insn): New function: Combines duplicate code found in
2451 print_insn_big_arm and print_insn_little_arm.
2452 (print_insn_big_arm): Call print_insn.
2453 (print_insn_little_arm): Call print_insn.
2454 (print_arm_disassembler_options): Display list of supported,
2455 ARM specific disassembler options.
2457 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2459 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2460 ARM_STT_16BIT flag as Thumb code symbols.
2462 * arm-dis.c (printf_insn_little_arm): Ditto.
2464 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2466 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2467 of raw thumb instructions.
2469 2000-01-20 Nick Clifton <nickc@redhat.com>
2471 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2473 2000-01-03 Nick Clifton <nickc@cygnus.com>
2475 * arm-dis.c (streq): New macro.
2476 (strneq): New macro.
2477 (force_thumb): ew local variable.
2478 (parse_disassembler_option): New function: Parse a single, ARM
2479 specific disassembler command line switch.
2480 (parse_disassembler_option): Call parse_disassembler_option to
2481 parse individual command line switches.
2482 (print_insn_big_arm): Check force_thumb.
2483 (print_insn_little_arm): Check force_thumb.
2485 For older changes see ChangeLog-9899
2491 version-control: never