opcodes/ChangeLog

   1 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
   2
   3         * disassemble.c (disassembler_usage): Remove unused attribute.
   4
   5 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
   6
   7         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
   8
   9 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
  10
  11         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
  12         assume incoming buffer already has the base insn loaded.  Handle
  13         smaller-than-base instructions for variable-length case.
  14
  15 2001-05-04  Alan Modra  <amodra@one.net.au>
  16
  17         * i386-dis.c (Ev, Ed): Remove duplicate define.
  18         (Gd): Define.
  19         (XS): Define.
  20         (OP_XS): New function.
  21         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
  22         movmskp operands.
  23         (dis386_twobyte_intel): Likewise.
  24         (prefix_user_table): Use MS for maskmovq operand.
  25
  26 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
  27
  28         * Makefile.am: Add OpenRISC target.
  29         * Makefile.in: Regenerated.
  30
  31         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
  32
  33         * configure.in (bfd_openrisc_arch): Add target.
  34         * configure: Regenerated.
  35
  36         * openrisc-asm.c: New file.
  37         * openrisc-desc.c: Likewise.
  38         * openrisc-desc.h: Likewise.
  39         * openrisc-dis.c: Likewise.
  40         * openrisc-ibld.c: Likewise.
  41         * openrisc-opc.c: Likewise.
  42         * openrisc-opc.h: Likewise.
  43
  44 2001-04-24  Christian Groessler  <cpg@aladdin.de>
  45
  46         * z8k-dis.c: add names of control registers (ctrl_names);
  47         (seg_length): provides instruction length fixup for segmented
  48         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
  49         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
  50         (unparse_intr): handle CLASS_PR, print addresses without '#'
  51         * z8k-opc.h: re-created with new z8kgen
  52         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
  53         entries for ldctl/ldctlb instruction
  54
  55 2001-04-06  Andreas Jaeger  <aj@suse.de>
  56
  57         * i386-dis.c: Add ffreep instruction.
  58
  59 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
  60
  61         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
  62
  63 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
  64
  65         * i386-dis.c (PREGRP25): Define.
  66         (dis386_twobyte_att): Use here in place of "movntq" entry.
  67         (dis386_twobyte_intel): Likewise.
  68         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
  69         (PREGRP26): Define.
  70         (dis386_twobyte_att): Use here.
  71         (dis386_twobyte_intel): Likewise.
  72         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
  73         (prefix_user_table <maskmovdqu>): XM operand, not MX.
  74         (prefix_user_table): Cosmetic changes to "bad" entries.
  75
  76 2001-03-23  Nick Clifton  <nickc@redhat.com>
  77
  78         * mips-opc.c: Remove extraneous whitespace.
  79         * mips-dis.c: Remove extraneous whitespace.
  80
  81 2001-03-22  Ben Elliston  <bje@redhat.com>
  82
  83         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
  84         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
  85         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
  86         to allay a compiler warning.
  87
  88 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
  89
  90         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
  91         (dis386_twobyte_intel): Likewise.
  92         (twobyte_has_modrm): Set entry for paddq, psubq.
  93
  94 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
  95
  96         * cgen-dis.in (print_insn_@arch@): Add support for target machine
  97         determination via CGEN_COMPUTE_MACH.
  98         * fr30-desc.c: Regenerate.
  99         * fr30-dis.c: Regenerate.
 100         * fr30-opc.h: Regenerate.
 101         * m32r-desc.c: Regenerate.
 102         * m32r-dis.c: Regenerate.
 103         * m32r-opc.h: Regenerate.
 104         * m32r-opinst.c: Regenerate.
 105
 106 2001-03-20  H.J. Lu  <hjl@gnu.org>
 107
 108         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 109         * configure: Rebuild.
 110
 111 2001-03-19  Jim Wilson  <wilson@redhat.com>
 112
 113         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 114         notestr if larger than xsect.
 115         (in_class): Handle format M5.
 116         * ia64-asmtab.c: Regnerate.
 117
 118 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 119
 120         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 121         has more than one byte left to read.
 122
 123 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 124
 125         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 126         * s390-opc.txt: Add new opcodes.
 127
 128 2001-03-06  Nick Clifton  <nickc@redhat.com>
 129
 130         * arm-dis.c (print_insn_thumb): Compute destination address
 131         of BLX(1) instruction by taking bit 1 from PC and not from bit
 132         0 of the offset.
 133
 134 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 135
 136         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 137         so command line switches will work.
 138
 139 2001-03-05  Dave Brolley  <brolley@redhat.com>
 140
 141         * fr30-asm.c: Regenerate.
 142         * fr30-desc.c: Regenerate.
 143         * fr30-desc.h: Regenerate.
 144         * fr30-dis.c: Regenerate.
 145         * fr30-ibld.c: Regenerate.
 146         * fr30-opc.c: Regenerate.
 147         * fr30-opc.h: Regenerate.
 148         * m32r-asm.c: Regenerate.
 149         * m32r-desc.c: Regenerate.
 150         * m32r-desc.h: Regenerate.
 151         * m32r-dis.c: Regenerate.
 152         * m32r-ibld.c: Regenerate.
 153         * m32r-opc.c: Regenerate.
 154         * m32r-opc.h: Regenerate.
 155         * m32r-opinst.c: Regenerate.
 156
 157 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 158
 159         * m68k-opc.c: fix cpushl according to Motorola. Enable
 160         bunch of instructions for Coldfire 5407 and add all new.
 161
 162 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 163
 164         * configure.in (BFD_VERSION): Do without grep.
 165         * configure: Regenerate.
 166         * Makefile.am: Run "make dep-am".
 167         * Makefile.in: Regenerate.
 168
 169 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 170
 171         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 172         * ia64-asmtab.c: Regenerate.
 173
 174 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 175
 176         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 177         separate variants: one for IMM22 and the other for IMM14.
 178         * ia64-asmtab.c: Regenerate.
 179
 180 2001-02-21  Greg McGary  <greg@mcgary.org>
 181
 182         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 183
 184 2001-02-20  H.J. Lu  <hjl@gnu.org>
 185
 186         * Makefile.am (ia64-ic.tbl): Remove the target.
 187         (ia64-raw.tbl): Likewise.
 188         (ia64-waw.tbl): Likewise.
 189         (ia64-war.tbl): Likewise.
 190         (ia64-asmtab.c): Generate it in the source directory.
 191         * Makefile.in: Regenerated.
 192
 193 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 194
 195         * Makefile.am: Add PDP-11 target.
 196         * configure.in: Likewise.
 197         * disassemble.c: Likewise.
 198         * pdp11-dis.c: New file.
 199         * pdp11-opc.c: New file.
 200
 201 2001-02-14  Jim Wilson  <wilson@redhat.com>
 202
 203         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 204         * ia64-asmtab.c: Regenerate.
 205
 206 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 207
 208         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 209         instructions.
 210         (putop): Handle 'Y'
 211
 212 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 213
 214         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 215         the following instruction not of the jump itself for the jump
 216         target.
 217         (print_mips16_insn_arg): Likewise.
 218
 219 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 220
 221         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 222         directory.
 223         * Makefile.in: Regenerate.
 224
 225 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 226
 227         * Makefile.am: Add linux target for S/390.
 228         * Makefile.in: Likewise.
 229         * configure.in: Likewise.
 230         * disassemble.c: Likewise.
 231         * s390-dis.c: New file.
 232         * s390-mkopc.c: New file.
 233         * s390-opc.c: New file.
 234         * s390-opc.txt: New file.
 235
 236 2001-02-05  Jim Wilson  <wilson@redhat.com>
 237
 238         * ia64-asmtab.c: Revert 2000-12-16 change.
 239
 240 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 241
 242         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 243         * m32r-desc.h: Regenerate.
 244
 245 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 246
 247         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 248         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 249
 250 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 251
 252         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 253
 254 2001-01-13  Nick Clifton  <nickc@redhat.com>
 255
 256         * disassemble.c: Remove spurious white space.
 257
 258 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 259
 260         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 261         templates.
 262
 263 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 264
 265         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 266         * Makefile.am (C_FILES): Add arc-ext.c.
 267         (ALL_MACHINES) Add arc-ext.lo.
 268         (INCLUDES) Add opcode directory to list.
 269         New dependency entry for arc-ext.lo.
 270         * disassemble.c (disassembler): Correct call to
 271         arc_get_disassembler.
 272         * arc-opc.c: New update for ARC, including full base
 273         instructions for ARC variants.
 274         * arc-dis.h, arc-dis.c: New update for ARC, including
 275         extensibility functionality.
 276         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 277
 278 2001-01-10  Jan Hubicka  <jh@suse.cz>
 279
 280         * i386-dis.c (PREGRP15 - PREGRP24): New.
 281         (dis386_twobyt): Add SSE2 instructions.
 282         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
 283         (twobyte_uses_f3_prefix): ... this one.
 284         (grps): Add SSE instructions.
 285         (prefix_user_table): Add two new slots; add SSE2 instructions.
 286         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
 287         Handle the REPNZ and Data16 prefixes as well; do proper lookup
 288         to prefix_user_table.
 289         (OP_E): Accept mfence and lfence as well.
 290         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
 291         (OP_XMM): Support REX extensions.
 292         (OP_EM): Likewise.
 293         (OP_EX): Likewise.
 294
 295 2001-01-09  Nick Clifton  <nickc@redhat.com>
 296
 297         * arm-dis.c (print_insn): Set pc to zero for instructions with
 298         a reloc associated with them.
 299
 300 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
 301
 302         * cgen-asm.in (parse_insn_normal): Changed syn to be
 303         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
 304         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
 305         to '\0' to use 0 instead.
 306         * cgen-dis.in (print_insn_normal): Ditto.
 307         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
 308
 309 2001-01-05  Jan Hubicka  <jh@suse.cz>
 310
 311         * i386-dis.c: Add x86_64 support.
 312         (rex): New static variable.
 313         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
 314         (USED_REX): New macro.
 315         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
 316         (OP_I64, OP_OFF64, OP_IMREG): New functions.
 317         (OP_REG, OP_OFF): Declare.
 318         (get64, get32, get32s): New functions.
 319         (r??_reg): New constants.
 320         (dis386_att): Change templates of instruction implicitly promoted
 321         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
 322         (grps): Likewise.
 323         (dis386_intel): Likewise.
 324         (dixx86_64_att): New table based on dis386_att.
 325         (dixx86_64_intel): New table based on dis386_intel.
 326         (names64, names8rex): New global variable.
 327         (names32, names16): Add extended registers.
 328         (prefix_user_t): Recognize rex prefixes.
 329         (prefix_name): Print REX prefixes nicely.
 330         (op_riprel): New global variable.
 331         (start_pc): Set type to bfd_vma.
 332         (print_insn_i386): Detect the 64bit mode and use proper table;
 333         move ckprefix after initializing the buffer; output unused rex prefixes;
 334         output information about target of RIP relative addresses.
 335         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
 336         (print_operand_value): New function.
 337         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
 338         REX prefix and new modes.
 339         (get64, get32s): New.
 340         (get32): Return bfd_signed_vma type.
 341         (set_op): Initialize the op_riprel.
 342         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
 343
 344 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
 345
 346          cgen-dis.in (read_insn): Use bfd_get_bits()
 347
 348 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
 349
 350         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
 351         (hash_insn_list): Likewise
 352         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
 353         (extract_1): Use bfd_get_bits().
 354         (extract_normal): Apply sign extension to both extraction
 355         methods.
 356         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
 357         (cgen_put_insn_value): Use bfd_put_bits()
 358
 359 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
 360
 361         * cgen-asm.in (parse_insn_normal): Print better error message for
 362         instructions with missing operands.
 363
 364 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
 365
 366         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
 367
 368 2000-12-16  Nick Clifton  <nickc@redhat.com>
 369
 370         * Makefile.in: Regenerate.
 371         * aclocal.m4: Regenerate.
 372         * config.in: Regenerate.
 373         * configure.in: Add spacing.
 374         * configure: Regenerate.
 375         * ia64-asmtab.c: Regenerate.
 376         * po/opcodes.pot: Regenerate.
 377
 378 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
 379
 380         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
 381         error messages over later parse-time ones.
 382
 383 2000-12-12  Jim Wilson  <wilson@redhat.com>
 384
 385         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
 386         argument.
 387         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
 388         (print_dependency_table): Print NULL if semantics field not set.
 389         (insert_opcode_dependencies): Mark cmp parameter as unused.
 390         (print_main_table): Use fprintf_vma to print long long fields.
 391         (main): Mark argv paramter as unused.  Convert to old style definition.
 392         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
 393         * ia64-asmtab.c: Regnerate.
 394
 395 2000-12-09  Nick Clifton  <nickc@redhat.com>
 396
 397         * m32r-dis.c (print_insn): Prevent re-read of instruction from
 398         wrong address.
 399
 400         * fr30-dis.c: Regenerate.
 401
 402 2000-12-08  Peter Targett  <peter.targett@arccores.com>
 403
 404         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 405         * Makefile.am (C_FILES): Add arc-ext.c.
 406         (ALL_MACHINES) Add arc-ext.lo.
 407         (INCLUDES) Add opcode directory to list.
 408         New dependency entry for arc-ext.lo.
 409         * disassemble.c (disassembler): Correct call to
 410         arc_get_disassembler.
 411         * arc-opc.c: New update for ARC, including full base
 412         instructions for ARC variants.
 413         * arc-dis.h, arc-dis.c: New update for ARC, including
 414         extensibility functionality.
 415         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 416
 417 2000-12-03  Chris Demetriou   cgd@sibyte.com
 418
 419         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
 420         MOD_HILO, and MOD_LO macros.
 421
 422         * mips-opc.c (M1, M2): Delete.
 423         (mips_builtin_opcodes): Remove all uses of M1.
 424
 425         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
 426         instructions take "G" format second operands and use the
 427         correct flags.
 428         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
 429         match.
 430         Delete "sel" code operands from mfc1 and mtc1.
 431         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
 432         for dm[ft]c[023].
 433
 434 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
 435             Chris Demetriou   cgd@sibyte.com
 436
 437         * mips-opc.c (mips_builtin_opcodes): Finish additions
 438         for MIPS32 support, and clean up existing entries for
 439         aesthetics, consistency with the MIPS32 ISA, and
 440         with consistency the rest of the table.
 441
 442 2000-12-01  Nick Clifton  <nickc@redhat.com>
 443
 444         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
 445         field.
 446
 447 2000-12-01  Chris Demetriou <cgd@sibyte.com>
 448
 449         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
 450         specifiers.  Update 'B' for new constant names, and remove
 451         'm'.
 452         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
 453         near the top of the array, so they are disassembled properly.
 454         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
 455         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
 456         specifier.  Add 'H' format specifier variants for "mfc1,"
 457         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
 458         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
 459         "wait" variant which uses 'J' operand specifier.
 460
 461         * mips-dis.c (set_mips_isa_type): Update to use
 462         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
 463         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
 464         * mips-opc.c (I32): New constant for instructions added in
 465         MIPS32.
 466         (P4): Delete.
 467         (mips_builtin_opcodes) Replace all uses of P4 with I32.
 468
 469         * mips-dis.c (set_mips_isa_type): Add cases for
 470         bfd_mach_mips5 and bfd_mach_mips64.
 471         * mips-opc.c (I64): New definitions.
 472
 473         * mips-dis.c (set_mips_isa_type): Add case for
 474         bfd_mach_mips_sb1.
 475
 476 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
 477
 478         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
 479         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
 480         Initialize variable dc to NULL.
 481         (print_insn_shx): Remove unused label d_reg_n.
 482
 483 2000-11-24  Nick Clifton  <nickc@redhat.com>
 484
 485         * arm-opc.h: Add new opcode formatting parameter 'B'.
 486         (arm_opcodes): Add XScale, v5, and v5te instructions.
 487         (thumb_opcodes): Add v5t instructions.
 488
 489         * arm-dis.c (print_insn_arm): Handle new 'B' format
 490         parameter.
 491         (print_insn_thumb): Decode BLX(1) instruction.
 492
 493 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
 494
 495         * mips-opc.c: Fix file header comment.
 496
 497 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
 498
 499         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
 500         print_insn_cris_with_register_prefix.
 501
 502 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
 503
 504         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
 505
 506 2000-11-07  Matthew Green  <mrg@redhat.com>
 507
 508         * cgen-dis.in (print_insn): All insns which can fit into insn_value
 509         must be loaded there in their entirety.
 510
 511 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
 512
 513         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
 514         (compute_arch_mask): Add v8plusb and v9b machines.
 515         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
 516         * sparc-opc.c: Support for Cheetah instruction set.
 517         (prefetch_table): Add #invalidate.
 518
 519 2000-10-16  Nick Clifton  <nickc@redhat.com>
 520
 521         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
 522
 523 2000-10-06  Dave Brolley  <brolley@redhat.com>
 524
 525         * fr30-desc.h: Regenerate.
 526         * m32r-desc.h: Regenerate.
 527         * m32r-ibld.c: Regenerate.
 528
 529 2000-10-05  Jim Wilson  <wilson@redhat.com>
 530
 531         * ia64-ic.tbl: Update from Intel.
 532         * ia64-asmtab.c: Regenerate.
 533
 534 2000-10-04  Kazu Hirata  <kazu@hxi.com>
 535
 536         * ia64-gen.c: Convert C++-style comments to C-style comments.
 537         * tic54x-dis.c: Likewise.
 538
 539 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
 540
 541         Changes to add dollar prefix to registers for files where user symbols
 542         don't have a leading underscore.  Fix formatting.
 543         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
 544         (format_reg): Add parameter with_reg_prefix.  All callers changed.
 545         (print_with_operands): Ditto.
 546         (print_insn_cris_generic): Renamed from print_insn_cris, add
 547         parameter with_reg_prefix.
 548         (print_insn_cris_with_register_prefix,
 549         print_insn_cris_without_register_prefix, cris_get_disassembler):
 550         New.
 551         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
 552
 553 2000-09-22  Jim Wilson  <wilson@redhat.com>
 554
 555         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
 556         gt, ge, ngt, and nge.
 557         * ia64-asmtab.c: Regenerate.
 558
 559         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
 560         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
 561         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
 562         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
 563         * ia64-asmtab.c: Regnerate.
 564
 565 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
 566
 567         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
 568         Add mfc0 and mtc0 with sub-selection values.
 569         Add clo and clz opcodes.
 570         Add msub and msubu instructions for MIPS32.
 571         Add madd/maddu aliases for mad/madu for MIPS32.
 572         Support wait, deret, eret, movn, pref for MIPS32.
 573         Support tlbp, tlbr, tlbwi, tlbwr.
 574         (P4): New define.
 575
 576         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
 577         (print_insn_arg): Handle 'H' args.
 578         (set_mips_isa_type): Recognize 4K.
 579         Use CPU_* defines instead of hardcoded numbers.
 580
 581 2000-09-11  Catherine Moore <clm@redhat.com>
 582
 583         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
 584         (d30v_format_tab): Use Rb2 for modinc and moddec.
 585
 586 2000-09-07  Catherine Moore  <clm@redhat.com>
 587
 588         * d30v-opc.c (d30v_format_tab): Use format Ra for
 589         modinc and moddec.
 590
 591 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
 592
 593         * configure: Rebuilt with new libtool.m4.
 594
 595 2000-09-05  Nick Clifton  <nickc@redhat.com>
 596
 597         * configure: Regenerate.
 598         * po/opcodes.pot: Regenerate.
 599
 600 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
 601
 602         * acinclude.m4: Include libtool and gettext macros from the
 603         top level.
 604         * aclocal.m4, configure: Rebuilt.
 605
 606 2000-08-30  Kazu Hirata  <kazu@hxi.com>
 607
 608         * tic80-dis.c: Fix formatting.
 609
 610 2000-08-29  Kazu Hirata  <kazu@hxi.com>
 611
 612         * w65-dis.c: Fix formatting.
 613
 614 2000-08-28  Mark Hatle  <mhatle@mvista.com>
 615
 616         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
 617         (powerpc_opcodes): Add table entries for PPC 405 instructions.
 618         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
 619         instructions.  Added extended mnemonic mftbl as defined in the
 620         405GP manual for all PPCs.
 621
 622 2000-08-28  Jim Wilson  <wilson@redhat.com>
 623
 624         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
 625         call.  Change last goto to use failed instead of done.
 626
 627 2000-08-28  Dave Brolley  <brolley@redhat.com>
 628
 629         * cgen-ibld.in (cgen_put_insn_int_value): New function.
 630         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 631         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
 632         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 633         * cgen-dis.in (read_insn): New static function.
 634         (print_insn): Use read_insn to read the insn into the buffer and set
 635         up for disassembly.
 636         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
 637         in the buffer.
 638         * fr30-asm.c: Regenerated.
 639         * fr30-desc.c: Regenerated.
 640         * fr30-desc.h: Regenerated.
 641         * fr30-dis.c: Regenerated.
 642         * fr30-ibld.c: Regenerated.
 643         * fr30-opc.c: Regenerated.
 644         * fr30-opc.h: Regenerated.
 645         * m32r-asm.c: Regenerated.
 646         * m32r-desc.c: Regenerated.
 647         * m32r-desc.h: Regenerated.
 648         * m32r-dis.c: Regenerated.
 649         * m32r-ibld.c: Regenerated.
 650         * m32r-opc.c: Regenerated.
 651
 652 2000-08-28  Kazu Hirata  <kazu@hxi.com>
 653
 654         * tic30-dis.c: Fix formatting.
 655
 656 2000-08-27  Kazu Hirata  <kazu@hxi.com>
 657
 658         * sh-dis.c: Fix formatting.
 659
 660 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
 661
 662         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
 663
 664 2000-08-24  Kazu Hirata  <kazu@hxi.com>
 665
 666         * z8k-dis.c: Fix formatting.
 667
 668 2000-08-16  Jim Wilson  <wilson@redhat.com>
 669
 670         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
 671         break, mov-immediate, nop.
 672         * ia64-opc-f.c: Delete fpsub instructions.
 673         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
 674         address operand.  Rewrite using macros to avoid long lines.
 675         * ia64-opc.h (POSTINC): Define.
 676         * ia64-asmtab.c: Regenerate.
 677
 678 2000-08-15  Jim Wilson  <wilson@redhat.com>
 679
 680         * ia64-ic.tbl: Add missing entries.
 681
 682 2000-08-08  Jason Eckhardt  <jle@redhat.com>
 683
 684         * i860-dis.c (print_br_address): Change third argument from int
 685         to long.
 686
 687 2000-08-07  Richard Henderson  <rth@redhat.com>
 688
 689         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
 690         for MLI templates.  Handle IA64_OPND_TGT64.
 691
 692 2000-08-04  Ben Elliston  <bje@redhat.com>
 693
 694         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
 695         * cgen.sh: Likewise.
 696
 697 2000-08-02  Jim Wilson  <wilson@redhat.com>
 698
 699         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
 700
 701 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
 702
 703         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
 704         Change return type from void to int.  Check the combination
 705         of operands, return 1 if valid.  Fix to avoid BUF overflow.
 706         Report undefined combinations of operands in COMMENT.
 707         Report internal errors to stderr.  Output the adiw/sbiw
 708         constant operand in both decimal and hex.
 709         (print_insn_avr): Disassemble ldd/std with displacement of 0
 710         as ld/st.  Check avr_operand () return value, handle invalid
 711         combinations of operands like unknown opcodes.
 712
 713 2000-07-28  Ben Elliston  <bje@redhat.com>
 714
 715         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
 716         (run-cgen, stamp-m32r, stamp-fr30): New targets.
 717         * Makefile.in: Regenerate.
 718         * configure.in: Add --enable-cgen-maint option.
 719         * configure: Regenerate.
 720
 721 2000-07-26  Dave Brolley  <brolley@redhat.com>
 722
 723         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
 724         (cgen_hw_lookup_by_num): Ditto.
 725         (cgen_operand_lookup_by_name): Ditto.
 726         (print_address): Ditto.
 727         (print_keyword): Ditto.
 728         * cgen-dis.c (hash_insn_array): Mark unused parameters with
 729         ATTRIBUTE_UNUSED.
 730         * cgen-asm.c (hash_insn_array): Mark unused parameters with
 731         ATTRIBUTE_UNUSED.
 732         (cgen_parse_keyword): Ditto.
 733
 734 2000-07-22  Jason Eckhardt  <jle@redhat.com>
 735
 736         * i860-dis.c: New file.
 737         (print_insn_i860): New function.
 738         (print_br_address): New function.
 739         (sign_extend): New function.
 740         (BITWISE_OP): New macro.
 741         (I860_REG_PREFIX): New macro.
 742         (grnames, frnames, crnames): New structures.
 743
 744         * disassemble.c (ARCH_i860): Define.
 745         (disassembler): Add check for bfd_arch_i860 to set disassemble
 746         function to print_insn_i860.
 747
 748         * Makefile.in (CFILES): Added i860-dis.c.
 749         (ALL_MACHINES): Added i860-dis.lo.
 750         (i860-dis.lo): New dependences.
 751
 752         * configure.in: New bits for bfd_i860_arch.
 753
 754         * configure: Regenerated.
 755
 756 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
 757
 758         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
 759         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
 760         (cris-dis.lo, cris-opc.lo): New rules.
 761         * Makefile.in: Rebuild.
 762         * configure.in (bfd_cris_arch): New target.
 763         * configure: Rebuild.
 764         * disassemble.c (ARCH_cris): Define.
 765         (disassembler): Support ARCH_cris.
 766         * cris-dis.c, cris-opc.c: New files.
 767         * po/POTFILES.in, po/opcodes.pot: Regenerate.
 768
 769 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
 770
 771         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
 772         Reported by Bill Clarke <llib@computer.org>.
 773
 774 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
 775
 776         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
 777         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
 778
 779 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
 780
 781         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
 782         fput_const, extract_3, extract_5_load, extract_5_store,
 783         extract_5r_store, extract_5R_store, extract_10U_store,
 784         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
 785         extract_12, extract_17, extract_22): Prototype.
 786         (print_insn_hppa): Rename inner block opcode -> opc to avoid
 787         shadowing outer block.
 788         (GET_BIT): Define.
 789
 790 2000-07-05  DJ Delorie  <dj@redhat.com>
 791
 792         * MAINTAINERS: new
 793
 794 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
 795
 796         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
 797
 798 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
 799
 800         * avr-dis.c (avr_operand): Change _ () to _() around all strings
 801         marked for translation (exception from the usual coding style).
 802         (print_insn_avr): Initialize insn2 to avoid warnings.
 803
 804 2000-07-03  Kazu Hirata  <kazu@hxi.com>
 805
 806         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
 807         * h8500-dis.c: Fix formatting.
 808
 809 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
 810
 811         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
 812         (CLEANFILES): Add DEPA.
 813         * Makefile.in: Regenerate.
 814
 815 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
 816
 817         * arm-dis.c (regnames): Add an additional register set to match
 818         the set used by GCC.  Make it the default.
 819
 820 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
 821
 822         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
 823         find one.
 824         * Makefile.in: Regenerate.
 825
 826 2000-06-20  H.J. Lu  <hjl@gnu.org>
 827
 828         * Makefile.am: Rebuild dependency.
 829         * Makefile.in: Rebuild.
 830
 831 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
 832
 833         * Makefile.in, configure: regenerate
 834         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
 835         ARCH_m68hc11.
 836         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
 837         New functions.
 838         * configure.in: Recognize m68hc12 and m68hc11.
 839         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
 840         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
 841         and opcode generation for m68hc11 and m68hc12.
 842
 843 2000-06-16  Nick Duffek  <nsd@redhat.com>
 844
 845         * disassemble.c (disassembler): Refer to the PowerPC 620 using
 846         bfd_mach_ppc_620 instead of 620.
 847
 848 2000-06-12  Kazu Hirata  <kazu@hxi.com>
 849
 850         * h8300-dis.c: Fix formatting.
 851         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
 852         correctly.
 853
 854 2000-06-09  Denis Chertykov  <denisc@overta.ru>
 855
 856         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
 857
 858 2000-06-07  Denis Chertykov  <denisc@overta.ru>
 859
 860         * avr-dis.c: completely rewritten.
 861
 862 2000-06-02  Kazu Hirata  <kazu@hxi.com>
 863
 864         * h8300-dis.c: Follow the GNU coding style.
 865         (bfd_h8_disassemble) Fix a typo.
 866
 867 2000-06-01  Kazu Hirata  <kazu@hxi.com>
 868
 869         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
 870         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
 871         correctly.  Fix a typo.
 872
 873 2000-05-31  Nick Clifton  <nickc@redhat.com>
 874
 875         * opintl.h (_(String)): Explain why dgettext is used instead of
 876         gettext.
 877
 878 2000-05-30  Nick Clifton  <nickc@redhat.com>
 879
 880         * opintl.h (gettext, dgettext, dcgettext, textdomain,
 881         bindtextdomain): Replace defines with those from intl/libgettext.h
 882         to quieten gcc warnings.
 883
 884 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
 885
 886         * Makefile.am: Update dependencies with "make dep-am"
 887         * Makefile.in: Regenerate.
 888
 889 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
 890
 891         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
 892         sign-extending operands.
 893
 894 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
 895
 896         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
 897         except brf's.
 898
 899 2000-05-21  Nick Clifton  <nickc@redhat.com>
 900
 901         * Makefile.am (LIBIBERTY): Define.
 902
 903 2000-05-19 Diego Novillo <dnovillo@redhat.com>
 904
 905         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
 906         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
 907         (reg_names): Rename to std_reg_names. Change it to a char **
 908         static variable.
 909         (std_reg_names): New name for reg_names.
 910         (set_mips_isa_type): Set reg_names to point to std_reg_names by
 911         default.
 912
 913 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
 914
 915         * fr30-desc.h: Partially regenerated to account for changed
 916         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
 917         * m32r-desc.h: Ditto.
 918
 919 2000-05-15  Nick Clifton  <nickc@redhat.com>
 920
 921         * arm-opc.h: Use upper case for flasg in MSR and MRS
 922         instructions.  Allow any bit to be set in the field_mask of
 923         the MSR instruction.
 924
 925         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
 926         field_mask of an MSR instruction.
 927
 928 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
 929
 930         * arm-opc.h: Disassembly of thumb ldsb/ldsh
 931         instructions changed to ldrsb/ldrsh.
 932
 933 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
 934
 935         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
 936         target addresses for 'jal' and 'j'.
 937
 938 2000-05-10  Geoff Keating  <geoffk@redhat.com>
 939
 940         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
 941         also available in common mode when powerpc syntax is being used.
 942
 943 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
 944
 945         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
 946         (dummy_print_address): Ditto.
 947
 948 2000-05-04  Timothy Wall  <twall@redhat.com>
 949
 950         * tic54x-opc.c: New.
 951         * tic54x-dis.c: New.
 952         * disassemble.c (disassembler): Add ARCH_tic54x.
 953         * configure.in: Added tic54x target.
 954         * configure: Ditto.
 955         * Makefile.am: Add tic54x dependencies.
 956         * Makefile.in: Ditto.
 957
 958 2000-05-03  J.T. Conklin  <jtc@redback.com>
 959
 960         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
 961         vector unit operands.
 962         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
 963         unit instruction formats.
 964         (PPCVEC): New macro, mask for vector instructions.
 965         (powerpc_operands): Add table entries for above operand types.
 966         (powerpc_opcodes): Add table entries for vector instructions.
 967
 968         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
 969         (print_insn_little_powerpc): Likewise.
 970         (print_insn_powerpc): Prepend 'v' when printing vector registers.
 971
 972 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
 973
 974         * configure.in: Add bfd_powerpc_64_arch.
 975         * disassemble.c (disassembler): Use print_insn_big_powerpc for
 976         64 bit code.
 977
 978 2000-04-24  Nick Clifton  <nickc@redhat.com>
 979
 980         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
 981         field.
 982
 983 2000-04-23  Denis Chertykov  <denisc@overta.ru>
 984
 985         * avr-dis.c (reg_fmul_d): New. Extract destination register from
 986         FMUL instruction.
 987         (reg_fmul_r): New. Extract source register from FMUL instruction.
 988         (reg_muls_d): New. Extract destination register from MULS instruction.
 989         (reg_muls_r): New. Extract source register from MULS instruction.
 990         (reg_movw_d): New. Extract destination register from MOVW instruction.
 991         (reg_movw_r): New. Extract source register from MOVW instruction.
 992         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
 993         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
 994
 995 2000-04-22  Timothy Wall  <twall@redhat.com>
 996
 997         * ia64-gen.c (general): Add an ordered table of primary
 998         opcode names, as well as priority fields to disassembly data
 999         structures to enforce a preferred disassembly format based on the
1000         ordering of the opcode tables.
1001         (load_insn_classes): Show a useful message if IC tables are missing.
1002         (load_depfile): Ditto.
1003         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1004         distinguish preferred disassembly.
1005         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1006         format.  Fix incorrect flag on fma.s/fma.s.s0.
1007         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1008         the highest priority.
1009         * ia64-opc-b.c: Use more abbreviations.
1010         * ia64-asmtab.c: Regenerate.
1011
1012 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1013
1014         * hppa-dis.c (extract_16): New function.
1015         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1016         new operand types l,y,&,fe,fE,fx.
1017
1018 2000-04-21  Richard Henderson  <rth@redhat.com>
1019             David Mosberger  <davidm@hpl.hp.com>
1020             Timothy Wall <twall@redhat.com>
1021             Bob Manson  <manson@charmed.cygnus.com>
1022             Jim Wilson  <wilson@redhat.com>
1023
1024         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1025         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1026         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1027         ia64-asmtab.c.
1028         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1029         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1030         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1031         * Makefile.in: Rebuild.
1032         * configure Rebuild.
1033         * configure.in (bfd_ia64_arch): New target.
1034         * disassemble.c (ARCH_ia64): Define.
1035         (disassembler): Support ARCH_ia64.
1036         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1037         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1038         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1039         ia64-war.tbl, ia64-waw.tbl: New files.
1040
1041 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1042
1043         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1044         (disassemble): Use them.
1045
1046 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1047
1048         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1049         * Makefile.am: Update dependencies.
1050         * Makefile.in: Regenerate.
1051
1052 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1053
1054         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1055         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1056         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1057         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1058         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1059         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1060         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1061         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1062         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1063         ansidecl.h as sysdep.h includes it.
1064
1065 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1066
1067         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1068         --enable-build-warnings option.
1069         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1070         * Makefile.in, configure: Re-generate.
1071
1072 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1073
1074         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1075         stc GBR,@-<REG_N> is available for arch_sh1_up.
1076         Group parallel processing insn with identical mnemonics together.
1077         Make three-operand psha / pshl come first.
1078
1079 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1080
1081         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1082         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1083         (sh_arg_type): Add A_PC.
1084         (sh_table): Update entries using immediates.  Add repeat.
1085         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1086         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1087
1088 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1089
1090         * po/opcodes.pot: Regenerate.
1091
1092         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1093         (DEP): Quote when passing vars to sub-make.  Add warning message
1094         to end.
1095         (DEP1): Rewrite for "gcc -MM".
1096         (CLEANFILES): Add DEP2.
1097         Update dependencies.
1098         * Makefile.in: Regenerate.
1099
1100 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1101
1102         * avr-dis.c: Syntax cleanup.
1103         (add0fff): Print the pc relative address as a signed number.
1104         (add03f8): Likewise.
1105
1106 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1107
1108         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1109         the parameter ATTRIBUTE_UNUSED.
1110         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1111
1112 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1113
1114         * m10300-opc.c: SP-based offsets are always unsigned.
1115
1116 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1117
1118         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1119         [branch always] instead of "undefined".
1120
1121 2000-03-27  Nick Clifton  <nickc@redhat.com>
1122
1123         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1124         short instructions, from end of list of long instructions.
1125
1126 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1127
1128         * Makefile.am (CFILES): Add avr-dis.c.
1129         (ALL_MACHINES): Add avr-dis.lo.
1130
1131 2000-03-27  Alan Modra  <alan@linuxcare.com>
1132
1133         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1134         truncate integers.
1135         (print_insn_avr): Call function via pointer in K&R compatible way.
1136         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1137         add0fff, add03f8): Convert to old style function declaration and
1138         add prototype.
1139         (avrdis_opcode): Add prototype.
1140
1141 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1142
1143         * avr-dis.c: New file.  AVR disassembler.
1144         * configure.in (bfd_avr_arch): New architecture support.
1145         * disassemble.c: Likewise.
1146         * configure: Regenerate.
1147
1148 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1149
1150         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1151
1152 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1153
1154         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1155         flag to determine if operand is pc-relative.
1156         * d30v-opc.c:
1157         (d30v_format_table):
1158         (REL6S3): Renamed from IMM6S3.
1159         Added flag OPERAND_PCREL.
1160         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1161         added flag OPERAND_PCREL.
1162         (IMM12S3U): Replaced with REL12S3.
1163         (SHORT_D2, LONG_D): Delay target is pc-relative.
1164         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1165         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1166         using the REL* operands.
1167         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1168         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1169         LONG_Db, using REL* operands.
1170         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1171         (d30v_opcode_table): Use new *r formats.
1172
1173 2000-02-28  Nick Clifton  <nickc@redhat.com>
1174
1175         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1176         'signed_overflow_ok_p'.
1177
1178 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1179
1180         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1181         name of the libtool directory.
1182         * Makefile.in: Rebuild.
1183
1184 2000-02-24  Nick Clifton  <nickc@redhat.com>
1185
1186         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1187         (cgen_clear_signed_overflow_ok): New function.
1188         (cgen_signed_overflow_ok_p): New function.
1189
1190 2000-02-23  Andrew Haley  <aph@redhat.com>
1191
1192         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1193         m32r-ibld.c, m32r-opc.h: Rebuild.
1194
1195 2000-02-23  Linas Vepstas <linas@linas.org>
1196
1197         * i370-dis.c, i370-opc.c: New.
1198
1199         * disassemble.c (ARCH_i370): Define.
1200         (disassembler): Handle it.
1201
1202         * Makefile.am: Add support for Linux/IBM 370.
1203         * configure.in: Likewise.
1204
1205         * Makefile.in: Regenerate.
1206         * configure: Likewise.
1207
1208 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1209
1210         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1211         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1212         procedure.
1213
1214 2000-02-22  Andrew Haley  <aph@redhat.com>
1215
1216         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1217         force gp32 to zero.
1218         * mips-opc.c (G6): New define.
1219         (mips_builtin_op): Add "move" definition for -gp32.
1220
1221 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1222
1223         From Grant Erickson <gerickso@Brocade.COM>:
1224         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1225
1226 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1227
1228         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1229         vars to unsigned.
1230
1231 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1232
1233         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1234         (print_insn_ppi): Likewise.
1235         (print_insn_shx): Use info->mach to select appropriate insn set.
1236         Add support for sh-dsp.  Remove FD_REG_N support.
1237         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1238         (sh_arg_type): Likewise.  Remove FD_REG_N.
1239         (sh_dsp_reg_nums): New enum.
1240         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1241         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1242         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1243         (arch_sh3_dsp_up): Likewise.
1244         (sh_opcode_info): New field: arch.
1245         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1246         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1247
1248 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1249
1250         * arm-dis.c: Change flavor name from atpcs-special to
1251         special-atpcs to prevent name conflict in gdb.
1252         (get_arm_regname_num_options, set_arm_regname_option,
1253         get_arm_regnames): New functions.  API to access the several
1254         flavor of register names.  Note: Used by gdb.
1255         (print_insn_thumb): Use the register name entry from the currently
1256         selected flavor for LR and PC.
1257
1258 2000-02-10  Nick Clifton  <nickc@redhat.com>
1259
1260         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1261         classes.
1262         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1263         "mulsh.h" instructions.
1264         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1265         classes.
1266         (print_insn_mcore): Add support for little endian targets.
1267         Add support for MULSH and OPSR classes.
1268
1269 2000-02-07  Nick Clifton  <nickc@redhat.com>
1270
1271         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1272         Previous delat did not take.
1273
1274 2000-02-03  Timothy Wall  <twall@redhat.com>
1275
1276         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
1277         to adjust target address bounds checking and calculate the
1278         appropriate octet offset into data.
1279
1280 2000-01-27  Nick Clifton  <nickc@redhat.com>
1281
1282         * arm-dis.c: (parse_disassembler_option): Rename to
1283         parse_arm_disassembler_option and allow to be exported.
1284
1285         * disassemble.c (disassembler_usage): New function: Print out any
1286         target specific disassembler options.
1287         Call arm_disassembler_options() if the ARM architecture is being
1288         supported.
1289
1290         * arm-dis.c (NUM_ELEM): Define this macro if not already
1291         defined.
1292         (arm_regname): New struct type for ARM register names.
1293         (arm_toggle_regnames): Delete.
1294         (parse_disassembler_option): Use register name structure.
1295         (print_insn): New function: Combines duplicate code found in
1296         print_insn_big_arm and print_insn_little_arm.
1297         (print_insn_big_arm): Call print_insn.
1298         (print_insn_little_arm): Call print_insn.
1299         (print_arm_disassembler_options): Display list of supported,
1300         ARM specific disassembler options.
1301
1302 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
1303
1304         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1305         ARM_STT_16BIT flag as Thumb code symbols.
1306
1307         * arm-dis.c (printf_insn_little_arm): Ditto.
1308
1309 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
1310
1311         * arm-dis.c (printf_insn_thumb): Prevent double dumping
1312         of raw thumb instructions.
1313
1314 2000-01-20  Nick Clifton  <nickc@redhat.com>
1315
1316         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1317
1318 2000-01-03  Nick Clifton  <nickc@cygnus.com>
1319
1320         * arm-dis.c (streq): New macro.
1321         (strneq): New macro.
1322         (force_thumb): ew local variable.
1323         (parse_disassembler_option): New function: Parse a single, ARM
1324         specific disassembler command line switch.
1325         (parse_disassembler_option): Call parse_disassembler_option to
1326         parse individual command line switches.
1327         (print_insn_big_arm): Check force_thumb.
1328         (print_insn_little_arm): Check force_thumb.
1329
1330 For older changes see ChangeLog-9899
1331 \f
1332 Local Variables:
1333 mode: change-log
1334 left-margin: 8
1335 fill-column: 74
1336 version-control: never
1337 End: