2 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
5 short store word (sst.w).
7 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
9 * v850-opc.c (v850_operands): Added insert and extract fields,
10 pointers to functions that handle unusual operand encodings.
12 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
14 * v850-opc.c (v850_opcodes): Enable "trap".
16 * v850-opc.c (v850_opcodes): Fix order of displacement
17 and register for "set1", "clr1", "not1", and "tst1".
19 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
21 * v850-opc.c (v850_operands): Add "B3" support.
22 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
25 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
27 * v850-opc.c: Close unterminated comment.
29 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
31 * v850-opc.c (v850_operands): Add flags field.
32 (v850_opcodes): add move opcodes.
34 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
36 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
37 * configure: (bfd_v850v_arch) Add new case.
38 * configure.in: (bfd_v850_arch) Add new case.
39 * v850-opc.c: New file.
42 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
44 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
47 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
49 * d10v-opc.c: Add additional information to the opcode
50 table to help determinine which instructions can be done
54 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
56 * mpw-make.sed: Update editing of include pathnames to be
59 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
61 * arm-opc.h: Added "bx" instruction definition.
63 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
65 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
68 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
70 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
72 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
74 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
77 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
79 * makefile.vms: Update for alpha-opc changes.
81 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
83 * i386-dis.c (print_insn_i386): Actually return the correct value.
84 (ONE, OP_ONE): #ifdef out; not used.
87 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
89 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
90 Changed subi operand type to treat 0 as 16.
93 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
95 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
98 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
100 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
101 memory transfer instructions. Add new format string entries %h and %s.
102 * arm-dis.c: (print_insn_arm): Provide decoding of the new
106 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
108 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
109 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
112 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
114 * alpha-dis.c (print_insn_alpha_osf): Remove.
115 (print_insn_alpha_vms): Remove.
116 (print_insn_alpha): Make globally visible. Chose the register
117 names based on info->flavour.
118 * disassemble.c: Always return print_insn_alpha for the alpha.
121 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
123 * d10v-dis.c (dis_long): Handle unknown opcodes.
125 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
127 * d10v-opc.c: Changes to support signed and unsigned numbers.
128 All instructions with the same name that have long and short forms
129 now end in ".l" or ".s". Divs added.
130 * d10v-dis.c: Changes to support signed and unsigned numbers.
132 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
134 * d10v-dis.c: Change all functions to use info->print_address_func.
137 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
139 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
140 move ccr/sr insns more strict so that the disassembler only
141 selects them when the addressing mode is data register.
144 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
145 * d10v-opc.c (pre_defined_registers): Declare.
146 * d10v-dis.c (print_operand): Now uses pre_defined_registers
147 to pick a better name for the registers.
150 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
152 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
153 operands for fexpand and fpmerge. From Christian Kuehnke
154 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
156 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
158 * alpha-dis.c (print_insn_alpha): No longer the user-visible
159 print routine. Take new regnames and cpumask arguments.
160 Kill the environment variable nonsense.
161 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
162 (print_insn_alpha_vms): New function. Do VMS style regnames.
163 * disassemble.c (disassembler): Test bfd flavour to pick
164 between OSF and VMS routines. Default to OSF.
166 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
168 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
169 * configure: Rebuild.
170 * Makefile.in (install): Use @INSTALL_SHLIB@.
173 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
175 * configure: (bfd_d10v_arch) Add new case.
176 * configure.in: (bfd_d10v_arch) Add new case.
177 * d10v-dis.c: New file.
178 * d10v-opc.c: New file.
179 * disassemble.c (disassembler) Add entry for d10v.
182 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
184 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
185 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
187 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
189 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
190 distinguish between variants of the instruction set.
191 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
192 distinguish between variants of the instruction set.
194 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
196 * i386-dis.c (print_insn_i8086): New routine to disassemble using
197 the 8086 instruction set.
198 * i386-dis.c: General cleanups. Make most things static. Add
199 prototypes. Get rid of static variables aflags and dflags. Pass
200 them as args (to almost everything).
202 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
204 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
206 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
208 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
209 if the next arg is marked with SRC_IN_DST. Gross.
211 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
212 we're looking for and find EXR.
214 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
215 if we're looking for KBIT and we don't find it.
217 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
220 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
221 3bit immediate operands.
223 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
225 * Released binutils 2.7.
227 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
228 <kkaempf@progis.ac-net.de>.
230 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
232 * alpha-opc.c: Correct second case of "mov" to use OPRL.
234 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
236 * sparc-dis.c (print_insn_sparclite): New routine to print
237 sparclite instructions.
239 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
241 * m68k-opc.c (m68k_opcodes): Add coldfire support.
243 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
245 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
246 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
247 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
249 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
251 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
252 Use autoconf-set values.
253 (docdir, oldincludedir): Removed.
254 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
256 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
258 * alpha-opc.c: New file.
259 * alpha-opc.h: Remove.
260 * alpha-dis.c: Complete rewrite to use new opcode table.
261 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
262 * configure: Rebuild with autoconf 2.10.
263 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
264 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
266 (alpha-opc.o): New target.
268 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
270 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
271 Set imm_added_to_rs1 even if the source and destination register
274 * sparc-opc.c: Add some two operand forms of the wr instruction.
276 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
278 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
281 * disassemble.c (disassembler): Handle H8/S.
282 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
284 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
286 * sparc-opc.c: Add beq/teq as aliases for be/te.
288 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
289 <sergei@msil.sps.mot.com>.
291 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
293 * makefile.vms: New file.
295 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
297 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
299 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
302 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
304 * i386-dis.c (OP_OFF): Call append_prefix.
306 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
308 * ppc-opc.c (instruction encoding macros): Add explicit casts to
309 unsigned long to silence a warning from the Solaris PowerPC
312 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
314 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
316 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
318 * sparc-dis.c (X_IMM,X_SIMM): New macros.
320 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
321 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
322 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
323 cpush, cpusha, cpull sparclet insns.
325 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
327 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
329 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
331 * sparc-opc.c: Set F_FBR on floating point branch instructions.
332 Set F_FLOAT on other floating point instructions.
334 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
336 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
338 (powerpc_opcodes): Add 860/821 specific SPRs.
340 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
342 * configure.in: Permit --enable-shared to specify a list of
343 directories. Set and substitute BFD_PICLIST.
344 * configure: Rebuild.
345 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
346 uses. Set to @BFD_PICLIST@.
348 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
350 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
351 not "abs", which may be needed for the absolute in something
352 like btst #0,@10:8. Print L_3 immediates separately from other
353 immediates. Change ABSMOV reference to ABS8MEM.
355 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
357 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
358 (current_arch_mask): New static global.
359 (compute_arch_mask): New static function.
360 (print_insn_sparc): Delete sparc_v9_p. New static local
361 current_mach. Resort opcode table if current_mach changes.
362 Generalize "insn not supported" test.
363 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
364 Delete test for v9/!v9.
365 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
367 (brfc): Split into CBR and FBR for coprocessor/fp branches.
368 (brfcx): Renamed to FBRX.
369 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
370 coprocessor mnemonics are not supported on the sparclet).
371 (condf): Renamed to CONDF.
372 (SLCBCC2): Delete F_ALIAS flag.
374 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
376 * sparc-opc.c (sparc_opcodes): rd must be 0 for
377 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
379 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
381 * Makefile.in (config.status): Depend upon BFD VERSION file, so
382 that the shared library version number is set correctly.
384 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
386 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
387 Miles Bader <miles@gnu.ai.mit.edu>.
388 * configure: Rebuild.
390 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
392 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
395 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
397 * configure: Rebuild with autoconf 2.8.
399 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
401 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
402 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
404 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
406 * configure.in: Don't set SHLIB or SHLINK to an empty string,
407 since they appear as targets in Makefile.in.
408 * configure: Rebuild.
410 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
412 * mpw-make.sed: Edit out shared library support bits.
414 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
416 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
417 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
418 (sparc_opcodes): Add sparclet insns.
419 (sparclet_cpreg_table): New static local.
420 (sparc_{encode,decode}_sparclet_cpreg): New functions.
421 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
423 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
425 * i386-dis.c (index16): New static variable.
426 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
428 (OP_indirE): Return result of OP_E.
429 (OP_E): Check for 16 bit addressing mode, and disassemble
430 correctly. Optimised 32 bit case a little. Don't print
431 "(base,index,scale)" when sib specifies only an offset.
433 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
435 * configure.in: Set and substitute SHLIB_DEP.
436 * configure: Rebuild.
437 * Makefile.in (SHLIB_DEP): New variable.
438 (LIBIBERTY_LISTS, BFD_LIST): New variables.
439 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
440 COMMON_SHLIB, add them to piclist with appropriate modifications.
441 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
442 here: just use piclist.
444 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
446 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
447 (print_insn_sparc): Rewrite v9/not-v9 tests.
448 (compare_opcodes): Likewise.
449 * sparc-opc.c (MASK_<ARCH>): Define.
450 (v6,v7,v8,sparclite,v9,v9a): Redefine.
451 (sparclet,v6notv9): Define.
452 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
453 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
455 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
457 * configure.in: Call AC_PROG_CC before configure.host.
458 * configure: Rebuild.
460 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
462 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
464 * i386-dis.c (onebyte_has_modrm): New static array.
465 (twobyte_has_modrm): New static array.
466 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
468 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
470 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
473 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
475 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
478 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
480 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
481 m68010up, not just m68020up | cpu32.
483 * Makefile.in (SONAME): New variable.
484 ($(SHLINK)): Make a link to the transformed name, as well.
485 (stamp-tshlink): New target.
486 (install): Skip stamp-tshlink during install.
488 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
490 * configure.in: Call AC_ARG_PROGRAM.
491 * configure: Rebuild.
492 * Makefile.in (program_transform_name): New variable.
493 (install): Transform library name before installing it.
495 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
497 * i960-dis.c (mem): Add HX dcinva instruction.
499 Support for building as a shared library, based on patches from
500 Alan Modra <alan@spri.levels.unisa.edu.au>:
501 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
502 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
503 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
504 * configure: Rebuild.
505 * Makefile.in (ALLLIBS): New variable.
506 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
507 (COMMON_SHLIB, SHLINK): New variables.
508 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
509 (STAGESTUFF): Remove variable.
510 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
511 (stamp-piclist, piclist): New targets.
512 ($(SHLIB), $(SHLINK)): New targets.
513 ($(OFILES)): Depend upon stamp-picdir.
514 (disassemble.o): Build twice if PICFLAG is set.
515 (MOSTLYCLEAN): Add pic/*.o.
516 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
517 (distclean): Remove pic and stamp-picdir.
518 (install): Install shared libraries.
519 (stamp-picdir): New target.
521 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
523 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
524 Print unknown instruction as "unknown", rather than in hex.
526 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
528 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
530 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
532 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
534 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
536 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
537 when necessary. From Ulrich Drepper
538 <drepper@myware.rz.uni-karlsruhe.de>.
540 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
542 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
543 sparc_num_opcodes. Update architecture enum values.
544 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
545 (sparc_opcode_lookup_arch): New function.
546 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
547 (sparc_opcodes): Add v9a shutdown insn.
549 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
551 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
552 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
554 (print_insn_sparc64): Deleted.
555 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
558 * sparc-opc.c (architecture_pname): Add v9a.
560 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
562 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
563 incorrectly defined as 0x16 when it should be 0x15.
564 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
565 (alpha_insn_set): added cvtst and cvttq float ops. Also added
566 excb (exception barrier) which is defined in the Alpha
567 Architecture Handbook version 2.
568 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
569 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
570 disassembled as or, for example.
572 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
574 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
575 (_print_insn_mips): Change i from int to unsigned int.
577 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
579 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
580 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
582 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
584 * i386-dis.c: Added Pentium Pro instructions.
586 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
588 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
591 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
593 * sh-opc.h (sh_nibble_type): Added REG_B.
594 (sh_arg_type): Added A_REG_B.
595 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
597 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
599 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
601 * disassemble.c (disassembler): Use new bfd_big_endian macro.
603 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
605 * Makefile.in (distclean): Remove stamp-h. From Ronald
606 F. Guilmette <rfg@monkeys.com>.
608 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
610 From David Mosberger-Tang <davidm@azstarnet.com>:
611 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
614 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
616 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
617 (sh_table): Added many SH3 opcodes.
618 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
620 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
622 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
623 (subco,subco.): Mark this PPC, not PPCCOM.
625 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
627 * configure: Rebuild with autoconf 2.7.
629 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
631 * configure: Rebuild with autoconf 2.6.
633 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
635 * configure.in: Sort list of architectures. Accept but do nothing
636 for alliant, convex, pyramid, romp, and tahoe.
638 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
640 * a29k-dis.c (print_special): Change num to unsigned int.
642 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
644 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
647 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
649 * configure.in: Call AC_CHECK_PROG to find and cache AR.
650 * configure: Rebuilt.
652 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
654 * configure.in: Add case for bfd_i860_arch.
655 * configure: Rebuild.
657 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
659 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
660 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
661 (NEXTDOUBLE): Likewise.
662 (print_insn_m68k): Don't match fmoveml if there is more than one
663 register in the list.
664 (print_insn_arg): Handle a place of '8' for a type of 'L'.
666 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
668 * m68k-opc.c: Use #W rather than #w.
669 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
671 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
673 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
674 and likewise for all the dbxx opcodes.
676 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
678 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
680 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
682 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
683 the VR4100 specific instructions to the mips_opcodes structure.
685 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
687 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
688 ugly Metrowerks bug in CW6, is fixed in CW7.
690 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
692 * ppc-opc.c (whole file): Add flags for common/any support.
694 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
696 * Makefile.in (BISON): Remove macro.
697 (FLAGS_TO_PASS): Remove BISON.
699 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
701 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
703 * m68k-dis.c (print_insn_m68k): Recognize all two-word
704 instructions that take no args by looking at the match mask.
705 (print_insn_arg): Always print "%" before register names.
706 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
707 [case '_']: Don't print "@#" before address.
708 [case 'J']: Use "%s" as format string, not register name.
709 [case 'B']: Treat place == 'C' like 'l' and 'L'.
711 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
713 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
716 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
718 From David Mosberger-Tang <davidm@azstarnet.com>
720 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
721 (alpha_insn_set): added definitions for VAX floating point
722 instructions (Unix compilers don't generate these, but handcoded
723 assembly might still use them).
725 * alpha-dis.c (print_insn_alpha): added support for disassembling
726 the miscellaneous instructions in the Alpha instruction set.
728 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
730 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
731 no longer create sysdep.h, sed ppc-opc.c to work around a
732 serious Metrowerks C bug.
733 * mpw-make.in: Remove.
734 * mpw-make.sed: New file, used by mpw-configure to edit
735 Makefile.in into an MPW makefile.
737 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
739 * Makefile.in (maintainer-clean): New synonym for realclean.
741 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
743 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
744 which use '0', '1', and '2' instead. Specify the proper size for
745 a pmove immediate operand. Correct the pmovefd patterns to be
746 moves to a register, not from a register.
747 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
749 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
751 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
752 %psr, %wim, %tbr as F_NOTV9.
754 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
756 * Makefile.in (Makefile): Just rebuild Makefile when running
758 (config.h, stamp-h): New targets.
759 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
760 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
762 * configure: Rebuild.
764 * mips-opc.c: Change unaligned loads and stores with "t,A"
765 operands to use "t,A(b)".
767 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
769 * sh-dis.c (print_insn_shx): Add F_FR0 support.
771 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
773 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
774 until 3 instead of until 2.
776 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
778 * Makefile.in (ALL_CFLAGS): Define.
779 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
780 (MOSTLYCLEAN): Add config.log.
781 (distclean): Don't remove config.log.
782 * configure.in: Substitute HDEFINES.
783 * configure: Rebuild.
785 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
787 * sh-opc.h (sh_arg_type): Add F_FR0.
788 (sh_table, case fmac): Add F_FR0 as first argument.
790 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
792 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
794 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
796 * sparc-dis.c: Remove all references to NO_V9.
798 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
800 * aclocal.m4: Just include ../bfd/aclocal.m4.
801 * configure: Rebuild.
803 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
805 * sparc-dis.c (X_DISP19): Define.
806 (print_insn, case 'G'): Use it.
807 (print_insn, case 'L'): Sign extend displacement.
809 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
811 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
812 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
813 host_makefile_frag or frags.
814 * aclocal.m4: New file.
815 * configure: Rebuild.
816 * Makefile.in (INSTALL): Set to @INSTALL@.
817 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
818 (INSTALL_DATA): Set to @INSTALL_DATA@.
820 (AR_FLAGS): Set to rc rather than qc.
821 (CC): Define as @CC@.
822 (CFLAGS): Set to @CFLAGS@.
823 (@host_makefile_frag@): Remove.
824 (config.status): Remove dependency upon @frags@.
826 * configure.in: ../bfd/config.bfd now just sets shell variables.
827 Use them rather than looking through target Makefile fragments.
828 * configure: Rebuild.
830 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
832 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
834 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
836 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
837 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
840 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
841 (lookup_{name,value}): New functions.
842 (prefetch_table): New static local.
843 (sparc_{encode,decode}_prefetch): New functions.
844 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
846 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
848 * sh-opc.h: Add blank lines to improve readabililty of sh3e
851 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
853 * sh-dis.c: Correct comment on first line of file.
855 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
857 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
859 * sparc-opc.c (asi, membar): New static locals.
860 (sparc_{encode,decode}_{asi,membar}): New functions.
861 (sparc_opcodes, membar insn): Fix.
862 * sparc-dis.c (print_insn): Call sparc_decode_asi.
863 Support decoding of membar masks.
866 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
868 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
870 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
872 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
873 and likewise for the other branches. Add bhs as an alias for bcc,
874 and likewise for the size variants. Add dbhs as an alias for
877 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
879 * sh-opc.h (FP sts instructions): Update to match reality.
881 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
883 * m68k-dis.c: (fpcr_names): Add % before all register names.
884 (reg_names): Likewise.
885 (print_insn_arg): Don't explicitly print % before register names.
886 Add % before register names in static array names. In case 'r',
887 print data registers as `@(Dn)', not `Dn@'. When printing a
888 memory address, don't print @# before it.
889 (print_indexed): Change base_disp and outer_disp from int to
890 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
891 syntax. Sign extend 8 byte displacement correctly.
892 (print_base): Print using MIT syntax. Print zpc when appropriate.
893 Change parameter disp from int to bfd_vma.
895 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
898 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
900 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
901 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
902 * sh-opc.h (sh_arg_type): Add new operand types.
903 (sh_table): Add new opcodes from SH3E Floating Point ISA.
905 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
907 * Makefile.in (distclean): Remove generated file config.h.
909 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
911 * Makefile.in (distclean): Remove generated file config.h.
913 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
915 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
917 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
919 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
920 rather than numopcodes. Use m68k_opcodes rather than removed
921 opcode function. Don't check F_ALIAS.
922 (print_insn_arg): Change first parameter to be const char *.
923 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
924 (m68k-opc.o): New target.
925 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
926 * configure: Rebuild.
928 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
930 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
931 (opcode_bits, opcode_hash_table): New variables.
932 (opcodes_initialized): Renamed from opcodes_sorted.
933 (build_hash_table): New function.
934 (is_delayed_branch): Use hash table.
935 (print_insn): Renamed from print_insn_sparc, made static.
936 Build and use hash table. If !sparc64, ignore sparc64 insns,
937 and vice-versa if sparc64.
938 (print_insn_sparc, print_insn_sparc64): New functions.
939 (compare_opcodes): Move sparc64 opcodes to end.
940 Print commutative insns with constant second.
941 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
943 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
945 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
946 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
947 avoids printing a delay slot in a delay slot.
948 * sh-opc.h (sh_table): Fully bracket last entry.
950 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
952 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
954 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
956 * configure.in: Get host_makefile_frag from ${srcdir}.
958 * configure.in: Autoconfiscated. Check for string[s].h. Create
959 config.h from config.in. Don't set up sysdep.h link.
960 * sysdep.h: New file.
961 * configure, config.in: New files, generated from configure.in.
962 * Makefile.in: Updated to be processed autoconf-style.
963 (distclean): Keep sysdep.h. Remove config.log and config.cache.
964 (Makefile): Depend on config.status.
965 (config.status): New rule.
966 * configure.bat: Update Makefile substitutions.
968 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
970 * mips-opc.c (L1): Define.
971 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
972 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
975 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
977 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
978 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
979 have multiple add units but only a single logical unit.
981 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
982 shifted by 18, without any insertion or extraction function.
983 (insert_cr, extract_cr): Remove.
986 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
988 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
991 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
993 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
996 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
998 * mpw-config.in: Add sh and i386 configs, remove sparc config.
999 * sh-opc.h: Add copyright.
1001 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1003 * Makefile.in (crunch-m68k): Delete extra target accidentally
1004 checked in a while ago.
1006 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1008 * sh-opc.h (sh_table): Add SH3 support.
1010 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1012 * sh-opc.h: Added bsrf and braf.
1014 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1016 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1017 bogus [ls]fm{ea,fd} patterns.
1019 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1020 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1021 initialize it from memory. Make function static.
1022 (print_insn_{big,little}_arm): New functions.
1023 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1024 the correct endianness.
1027 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1029 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1030 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1033 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1035 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1038 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1040 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1041 17th, so that it builds again using GCC as the compiler.
1043 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1045 * mips-dis.c (print_insn_little_mips): Cast return value from
1046 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1047 expects an unsigned long, and that might be fewer words of
1048 argument storage (e.g., if bfd_vma is long long on a 32-bit
1050 (print_insn_big_mips): Likewise with bfd_getb32 value.
1051 (_print_insn_mips): Now static.
1053 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1055 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1056 gcc memory hog problem with initializer is fixed.
1059 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1061 * arc-opc.c (NULL): Define.
1062 (arc_operands, insn fields u,s): Delete.
1063 (arc_operands, insn fields a,b,c): Mark as signed.
1064 (arc_opcodes): No longer const, links computed at run-time.
1065 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1066 suffixes that affect the insn code.
1067 (arc_opcodes): Resort table to macros are first.
1068 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1069 (arc_opcodes, st [b] entry): Likewise.
1070 (arc_opcodes, st [b,d] entry): Fix mask, value.
1071 (arc_reg_names): Add entries for r29, r30, r31, r60.
1072 (opcode_map, icode_map): New static globals.
1073 (arc_opcode_init_tables): Initialize them.
1074 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1075 (insert_shimmoffset): Signal error if register present.
1077 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1080 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1082 Merge in support for Mac MPW as a host.
1083 (Old change descriptions retained for informational value.)
1085 * mpw-config.in (archname): Compute from the config.
1086 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1088 * mpw-config.in (target_arch): Compute from canonical target.
1089 (m68k, mips, powerpc, sparc): Add architectures.
1090 * mpw-make.in (disassemble.c.o): Add.
1091 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1093 * mpw-config.in (BFD_MACHINES): Set to a default value.
1094 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1096 * mpw-make.in (CSEARCH): Add extra-include to search path.
1098 * mpw-config.in (varargs.h): Don't create.
1099 (sysdep.h): Create using forward-include.
1100 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1102 * mpw-config.in: New file, MPW version of configure.in.
1103 * mpw-make.in: New file, MPW version of Makefile.in.
1106 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1108 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1109 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1110 (print_insn_*): Pass bfd mach number, not opcode version.
1111 * arc-opc.c (arc_get_opcode_mach): New function.
1114 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1116 * alpha-dis.c (print_insn_alpha): Put empty statement after
1119 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1121 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1122 (low_sign_extend): Likewise.
1123 (get_field): Delete unused function.
1124 (set_field, deposit_14, deposit_21): Likewise.
1126 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1128 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1131 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1133 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1135 * alpha-opc.h (OSF_ASMCODE): define
1136 print pal-code names as defined in App C of the
1137 Alpha Architecture Reference Manual
1139 * alpha-dis.c: cleaned up output
1140 print stylized code forms as defined in App A.4.3 of the
1141 Alpha Architecture Reference Manual
1143 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1145 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1147 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1150 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1152 * m68k-dis.c (opcode): New function. Returns address of opcode
1153 table entry given index, even if the opcode table was split to
1154 work around gcc bugs.
1155 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1157 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1158 (reg_names): Now const.
1159 (print_insn_arg): Arrays cacheFieldName and names now const.
1160 (print_indexed): Array scales now const.
1163 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1165 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1166 (print_insn_arc_{host,graphics,audio}): Likewise.
1167 (print_insn): Add prototype.
1168 (arc_get_disassembler): New arg `big_p'. Return little or big
1169 print fn accordingly.
1170 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1171 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1172 (arc_opval_supported): Likewise.
1173 * disassemble.c (disassembler): Pass big endian flag to
1174 arc_get_disassembler.
1177 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1179 * ppc-opc.c: Sort recently added instructions by minor opcode
1180 number within major opcode number.
1182 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1184 * hppa-dis.c: Include libhppa.h.
1186 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1188 * mips-opc.c: Change dli to use M_DLI, and add dla.
1190 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1192 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1195 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1197 * arc-dis.c (arc_get_disassembler): Change argument to int,
1198 one of bfd_mach_arc_xxx. All callers updated.
1201 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1203 * mips-opc.c: Add r4650 mul instruction.
1205 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1207 * mips-opc.c: Add uld and usd macros for unaligned double load and
1210 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1212 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1213 mfdcr, mtdcr, icbt, iccci.
1216 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1218 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1219 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1220 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1221 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1222 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1223 (insert_absaddr): New function.
1225 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1227 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1228 New argument `cpu', pass it to arc_opcode_init_tables.
1229 Document byte order dependencies. Ignore unsupported insns.
1230 (arc_get_disassembler): New function.
1231 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1232 print_insn_arc_audio): New functions.
1233 * arc-opc.c (MULTSHIFT operand): Delete.
1234 (UNSIGNED, SATURATION): New operands.
1235 (mac, mul, mul64, mulu64): New insns.
1236 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1237 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1238 (host,graphics,audio extended and auxiliary regs): Define.
1239 (ss, sc, mh, ml): New suffixes.
1240 (arc_opcode_supported, arc_opval_supported): New functions.
1241 (insert_multshift, extract_multshift): Deleted.
1242 * disassemble.c (disassembler, case bfd_arch_arc): Call
1243 arc_get_disassembler to get disassembler routine.
1246 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1248 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1249 signed char fields to shorts, more portable.
1251 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1253 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1254 char fields as signed chars, since they may have negative values.
1256 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1258 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1259 (mycroft@netbsd.org).
1261 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1263 From "Logg, Ed" <elogg@ea.com>:
1264 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1265 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1268 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1270 * ppc-opc.c: Changes based on patch from David Edelsohn
1271 <edelsohn@mhpcc.edu>.
1272 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1275 (insert_tbr): New static function.
1276 (extract_tbr): New static function.
1277 (XFXFXM_MASK, XFXM): Define.
1278 (XSPRBAT_MASK, XSPRG_MASK): Define.
1279 (powerpc_opcodes): Add instructions to access special registers by
1280 name. Add mtcr and mftbu.
1282 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1284 * mips-opc.c (P3): Define.
1285 (mips_opcodes): Add mad and madu.
1287 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1289 * configure.in: Add W65 support.
1290 * disassemble.c: Likewise.
1291 * w65-opc.h, w65-dis.c: New files.
1293 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1295 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1299 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1301 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1303 * arc-opc.c (extract_reladdr): New function.
1304 (insert_reladdr): Store address right-shifted by 2.
1307 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1309 * mips-opc.c: Add dli as a synonym for li.
1312 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1314 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1316 (extraction fns): Insn argument now array of two words. Return pointer
1317 to value's table entry. All uses changed.
1318 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1319 (insert_multshift, extract_multshift): New fns.
1320 (arc_operands): Add support for cache bypass suffix. Add support for
1321 predefined aux regs. Modifier bits moved to flags field.
1322 (arc_opcodes): Likewise.
1323 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1324 New insn rlc. Update to syntax in programmer's manual.
1325 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1326 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1328 (arc_opcode_init_tables): New argument to indicate cpu type.
1329 (insert_reg): Handle predefined aux regs.
1330 (extract_reg): Likewise.
1331 (lookup_register): New fn.
1332 * arc-dis.c (arc_condition_codes): Deleted.
1333 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1334 Clean up modifier handling. Handle predefined aux regs.
1337 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1339 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1340 print something for reserved opcode values, even if it won't
1343 * mips-dis.c (_print_insn_mips): When initializing, shift right
1344 and mask, to avoid sign extension problems on the Alpha.
1346 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1350 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1352 * configure.in: Add ARC support.
1353 * disassemble.c: Likewise.
1354 * arc-dis.c, arc-opc.c: New files.
1357 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1359 * sh-opc.h (mov.l gbr): Get direction right.
1360 * sh-dis.c (print_insn_shx): New function.
1361 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1362 print opcodes with right byte order.
1364 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1366 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1367 to avoid conflicts with getopt.
1369 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1371 * hppa-dis.c (print_insn_hppa): Read the instruction using
1372 bfd_getb32, so that it works on a little endian or 64 bit host.
1373 Remove unused local variable op.
1375 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1377 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1378 addu does not work correctly if -mips3.
1380 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1382 * a29k-dis.c (print_special): Add special register names defined
1383 on 29030, 29040 and 29050.
1384 (print_insn): Handle new operand type 'I'.
1386 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1388 * Makefile.in (INSTALL): Use top level install.sh script.
1390 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1392 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1393 that it works on a little endian host.
1395 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1397 * configure.in: Use ${config_shell} when running config.bfd.
1399 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1401 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1403 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1405 * a29k-dis.c (print_insn): Print the opcode.
1407 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1409 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1411 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1413 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1415 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1417 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1418 which store a value into memory.
1420 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1422 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1423 * arm-dis.c, arm-opc.h: New files.
1425 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1427 * Makefile.in (ns32k-dis.o): Add dependency.
1428 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1429 string, not as array of chars.
1431 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1433 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1435 * sparc-opc.c: Added sparclite extended FP operations, and
1436 versions of v9 impdep* instructions permitting specification of
1439 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1441 * i960-dis.c (reg_names): Now const.
1442 (struct sparse_tabent): New type, copied from array type in mem
1444 (ctrl): Local static array ctrl_tab now const.
1445 (cobr): Local static array cobr_tab now const.
1446 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1447 static variable mem_tab no longer explicitly initialized. Changed
1448 mem_init to const array of struct sparse_tabent.
1449 (reg): Local static variable reg_tab no longer explicitly
1450 initialized. Changed reg_init to const array of struct
1452 (ea): Local static array scale_tab now const.
1454 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1457 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1459 * configure.bat: the disassember needs to be enabled for
1460 "objdump -d" to work in djgpp.
1462 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1464 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1465 (invalid_float): Enabled general version, doesn't require running
1466 on ns32k host. Changed to take char* argument, and test for
1467 explicitly specified sizes, instead of using sizeof() on host CPU
1469 (INVALID_FLOAT): Cast first argument.
1470 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1471 list_P032, list_M032): Now const.
1472 (optlist, list_search): Made appropriate arguments now point to
1474 (print_insn_arg): Changed static array of one-character-string
1475 pointers into a static const array of characters; fixed sprintf
1476 statement accordingly.
1478 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1480 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1481 from distribution. A ns32k-dis.c from a previous distribution has
1482 been brought up to date and supports the new interface.
1484 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1486 * configure.in: add bfd_ns32k_arch target support.
1488 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1489 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1491 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1493 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1496 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1498 * h8300-dis.c, mips-dis.c: Don't use true and false.
1500 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1502 * configure.in: Change --with-targets to --enable-targets.
1504 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1506 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1507 opcodes to the first instruction with that opcode, to speed
1508 disassembly of large files. From ralphc@pyramid.com (Ralph
1511 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1513 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1515 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1517 * configure.bat: update to latest makefile.in
1519 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1521 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1522 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1523 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1524 slot insn is in a delay slot.
1525 * z8k-opc.h: (resflg): Fix patterns.
1526 * h8500-opc.h Fix CR insn patterns.
1528 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1530 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1531 "cmpl" before POWER versions, so that gas -many uses them.
1533 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1535 * disassemble.c: New file.
1536 * Makefile.in (OFILES): Add disassemble.o.
1537 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1538 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1539 binutils/configure.in.
1541 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1542 opcode being examined.
1544 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1546 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1547 (insert_ral, insert_ram, insert_ras): New functions.
1548 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1549 RAS for store with update.
1551 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1553 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1554 (edelsohn@npac.syr.edu).
1556 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1558 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1561 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1563 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1565 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1567 * ppc-opc.c (powerpc_operands): The signedp field has been
1568 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1569 instead. Add new operand SISIGNOPT.
1570 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1571 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1572 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1575 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1577 * i386-dis.c (struct private): Renamed to dis_private. `private'
1578 is a reserved word for dynix cc.
1580 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1582 * configure.in: Change error message to refer to bfd/config.bfd
1583 rather than bfd/configure.in.
1585 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1587 * ppc-opc.c: Define POWER2 as short alias flag.
1588 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1591 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1593 * i960-dis.c (print_insn_i960): Don't read a second word for
1594 opcodes 0, 1, 2 and 3.
1596 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1598 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1600 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1602 * m68881-ext.c: Removed; no longer used.
1603 * Makefile.in: Changed accordingly.
1605 * m68k-dis.c (ext_format_68881): Don't declare.
1606 (print_insn_m68k): If an instruction uses place 'i', it uses at
1607 least four fixed bytes.
1608 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1609 extended float, convert to double using floatformat_to_double, not
1610 ieee_extended_to_double, and fetch the data before converting it.
1612 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1614 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1615 davidj@ICSI.Berkeley.EDU (David Johnson).
1617 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1619 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1620 PowerPC uses bdnz[l][a].
1622 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1624 * dis-buf.c, i386-dis.c: Include sysdep.h.
1626 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1628 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1630 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1631 by Motorola PowerPC 601 with PPC_OPCODE_601.
1632 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1633 Disassemble Motorola PowerPC 601 instructions as well as normal
1634 PowerPC instructions.
1636 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1638 * i960-dis.c (reg, mem): Just use a static array instead of
1641 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1643 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1644 condition name index if this is for a negated condition.
1646 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1647 Floating point format for 'H' operand is backwards from normal
1648 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1649 operands (fmpyadd and fmpysub), handle bizarre register
1650 translation correctly for single precision format.
1652 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1653 or 'I' operands if the next format specifier is 'M' (fcmp
1654 condition completer).
1656 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1658 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1659 single number giving a bitmask for the MB and ME fields of an M
1660 form instruction. Change NB to accept 32, and turn it into 0;
1661 also turn 0 into 32 when disassembling. Seperated SH from NB.
1662 (insert_mbe, extract_mbe): New functions.
1663 (insert_nb, extract_nb): New functions.
1664 (SC_MASK): Mask out SA and LK bits.
1665 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1666 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1667 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1668 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1669 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1670 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1671 (powerpc_macros): Define table of macro definitions.
1672 (powerpc_num_macros): Define.
1674 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1675 if PPC_OPERAND_NEXT is set.
1677 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1679 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1680 char. Retrieve contents using bfd_getl32 instead of shifting.
1682 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1684 * ppc-opc.c: New file. Opcode table for PowerPC, including
1685 opcodes for POWER (RS/6000).
1686 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1687 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1688 (CFILES): Add ppc-dis.c.
1689 (ppc-dis.o, ppc-opc.o): New targets.
1690 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1692 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1694 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1695 No space before 'u', 'f', or 'N'.
1697 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1699 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1700 farther than we should.
1702 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1704 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1706 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1708 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1710 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1711 needs it, to prevent reading past the end of a section.
1713 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1715 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1716 Removed t,A case for la; always use t,A(b) case.
1718 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1720 From Ted Lemen <mellon@pepper.ncd.com>
1721 * mips-dis.c (print_insn_arg): Handle 'k'.
1722 * mips-opc.c: Make cache use k, not t.
1724 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1726 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1727 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1728 FLOAT_FORMAT_CODE to put out floating point register names.
1730 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1732 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1734 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1736 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1738 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1740 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1741 larger than 32. Moved dsxx32 variants first for disassembler.
1743 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1745 * z8kgen.c, z8k-opc.h: Add full lda information.
1747 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1749 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1750 movb instructions. Any necessary space will be emitted by
1751 the code to handle nullification completers.
1753 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1755 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1757 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1759 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1760 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1762 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1764 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1766 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1768 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1769 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1771 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1773 * m88k-dis.c (m88kdis): comment change. Remove space after
1775 (printop): handle new arg types DEC and XREG for m88110.
1777 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1779 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1780 type for absolute branch addresses. Delete special
1781 "ble" and "be" code in 'W' operand code.
1783 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1785 * mips-opc.c: Set hazard information correctly for branch
1786 likely instructions.
1788 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1790 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1791 info->fprintf_func for printing and info->print_address_func for
1794 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1796 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1798 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1800 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1801 Corrected second case of "b" for disassembler.
1803 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1805 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1806 to BFD swapping routines to correspond to BFD name changes.
1808 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1810 * mips-opc.c: Change div machine instruction to be z,s,t rather
1811 than s,t. Change div macro to be d,v,t rather than d,s,t.
1812 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1813 rem and remu which generates only the corresponding div
1814 instruction. This is for compatibility with the MIPS assembler,
1815 which only generates the simple machine instruction when an
1816 explicit destination of $0 is used.
1817 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1819 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1821 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1822 WR_31 hazard for bal, bgezal, bltzal.
1824 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1826 * hppa-dis.c (print_insn_hppa): Use print function
1827 from within the disassemble_info, not fprintf_filtered.
1829 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1831 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1832 Law, law@cs.utah.edu.)
1834 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1836 * mips-opc.c ("absu"): Removed.
1839 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1841 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1842 Changed hazard information to distinguish between memory load
1843 delays and coprocessor load delays.
1845 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1847 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1849 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1851 * configure.in: Don't pass cpu to config.bfd.
1853 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1855 * m88k-dis.c (m88kdis): Make class unsigned.
1857 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1859 * alpha-dis.c (print_insn_alpha): One branch format case was
1860 missing the instruction name.
1862 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1864 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1865 Add the arch-specific auxiliary files.
1866 (OFILES): Remove the arch-specific auxiliary files
1867 and use BFD_MACHINES instead of DIS_LIBS.
1868 * configure.in: Set BFD_MACHINES based on --with-targets option.
1870 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1872 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1875 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1877 * sparc-opc.c: Change CONST to const to deal with gcc
1878 -Dconst=__const -traditional.
1880 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1882 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1883 coprocessor instructions out of #if 0, and made them use new
1886 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1888 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1890 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1892 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1893 instruction, for use by the disassembler.
1895 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1896 hand-coded sign extensions that depended on 32-bit host ints.
1897 FIXME, we still depend on big-endian host bitfield ordering.
1898 (sparc_print_insn): Set the insn_info_valid field, and the
1899 other fields that describe the instruction being printed.
1901 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1903 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1904 `jmp' instead of just one of them.
1906 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1908 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1909 (fput_fp_reg_r): Renamed from fput_reg_r.
1910 (fput_fp_reg): New function.
1911 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1913 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1915 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1917 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1919 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1921 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1922 don't output a space.
1924 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1926 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1928 * mips-opc.c: New file, containing opcode table from
1929 ../include/opcode/mips.h.
1930 * Makefile.in: Add it.
1932 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1934 * m88k-dis.c: New file, moved in from gdb and changed to use the
1935 new dis-asm.h disassembler interface.
1936 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1937 (m88k-dis.o): New target.
1939 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1941 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1942 argument string const char * to correspond to opcode/mips.h.
1944 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1946 * mips-dis.c: Updated to account for name changes in new version
1948 * Makefile.in: Added header file dependencies.
1950 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1952 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1954 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1956 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1957 extend, rather than shifts.
1959 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1961 * Makefile.in: Undo 15 June change.
1963 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1965 * m68k-dis.c (print_insn_arg): Change return value to byte count
1967 * m68k-dis.c: Re-write to detect invalid operands before
1968 printing anything, so we can handle this the same way we
1969 handle invalid opcodes.
1971 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1973 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1975 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1977 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1980 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1982 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1984 * configure.in: Do make sysdep.h link.
1985 * Makefile.in: Search ../include. Don't search ../bfd.
1987 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1989 Changes from Jeff Law, law@cs.utah.edu:
1990 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1991 Do not print a space before the completers specified by
1994 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1996 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1997 defined, since gdb has been fixed.
1999 Changes from Jeff Law, law@cs.utah.edu:
2000 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2001 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2002 be a *disassemble_info, not a *FILE.
2003 * hppa-dis.c: Support 'd', '!', and 'a'.
2004 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2005 * hppa-dis.c: Delete cases which are no longer needed.
2007 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2009 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2011 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2013 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2016 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2018 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2019 * configure.in: No longer need to configure to get sysdep.h.
2021 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2023 * Patches from Jeffrey Law <law@cs.utah.edu>.
2024 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2025 templates for 1.1 FP computational instructions.
2027 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2029 * h8500-dis.c (print_insn_h8500): Address argument is type
2031 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2034 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2035 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2037 * sparc-dis.c (compare_opcodes): Move static declaration to
2040 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2042 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2043 instruction, remove unimp hack from 'l' argument.
2045 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2047 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2050 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2052 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2053 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2056 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2058 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2059 arrays of string pointers to 2-d arrays of chars, to save
2062 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2064 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2065 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2067 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2069 * hppa-dis.c: New file from Utah, adapted to new disassembler
2071 * Makefile.in: Include it.
2073 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2075 * sh-dis.c, sh-opc.h: New files.
2077 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2079 * alpha-dis.c, alpha-opc.h: New files.
2081 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2083 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2086 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2088 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2090 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2092 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2095 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2097 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2098 and double percent signs a few places.
2100 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2102 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2103 Use info->print_address_func not print_address.
2105 * dis-buf.c (generic_print_address): New function.
2107 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2109 * Makefile.in: Add sparc-dis.c.
2110 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2112 Add `add' instruction to the set that get checked
2113 for a preceding `sethi' in order to print an absolute address.
2114 * (print_insn): Disassembly prefers real instructions.
2115 (is_delayed_branch): Speed up.
2116 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2117 Still missing some float ops, and needs testing.
2118 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2119 F_ALIAS. Use printf, not fprintf, when not passing a file
2121 (compare_opcodes): Check that identical instructions have
2122 identical opcodes, complain otherwise.
2125 * Include reg_names.
2127 Use dis-asm.h/read_memory_func interface.
2129 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2131 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2132 deliberately return non-zero to setjmp from longjmp. Otherwise
2133 this code fails to compile.
2135 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2137 * m68k-dis.c: Fix prototype for fetch_arg().
2139 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2141 * dis-buf.c: New file, for new read_memory_func interface.
2142 Makefile.in (OFILES): Include it.
2143 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2144 Use new read_memory_func interface.
2146 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2148 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2149 * h8500-opc.h: Fix couple of opcodes.
2151 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2153 * Makefile.in: add dvi & installcheck targets
2155 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2157 * Makefile.in: Update for h8500-dis.c.
2159 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2161 * h8500-dis.c, h8500-opc.h: New files
2163 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2165 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2166 ../include/dis-asm.h.
2167 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2168 and ../gdb/m68k-pinsn.c).
2169 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2170 and ../gdb/i386-pinsn.c).
2171 * m68881-ext.c: New file. Moved definition of
2172 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2173 * Makefile.in: Adjust for new files.
2174 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2175 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2176 can be dis-assembled.
2178 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2180 * mips-dis.c (print_insn_arg): Now returns void.
2182 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2184 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2185 files that use the macros.
2187 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2189 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2190 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2191 (CFILES): Added mips-dis.c.
2193 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2195 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2196 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2198 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2200 * Makefile.in: Improve *clean rules.
2201 * configure.in: Allow a default host.
2203 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2205 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2206 files include other sysdep files
2208 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2210 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2212 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2214 * configure.in: For host support, use ../bfd/configure.host
2215 so it stays in sync with the ../bfd/hosts database.
2217 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2219 * configure.in: use cpu-vendor-os triple instead of nested cases
2221 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2223 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2224 *always* the wrong one.
2226 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2228 * z8kgen.c: added copyright info
2230 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2232 * z8k-dis.c (unparse_instr): prettier tabs
2233 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2235 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2237 * configure.in: Add ncr* configuration.
2238 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2239 picayune ANSI compilers happy.
2241 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2243 * configure.in (i386): Make i386 and i486 synonymous for now.
2244 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2246 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2248 * Makefile.in (install): Fix typo.
2250 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2252 * Makefile.in (make): Remove obsolete crud.
2253 (sparc-opc.o): Avoid Sun Make VPATH bug.
2255 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2257 * Makefile.in: since there are no SUBDIRS, remove rule and
2258 references of subdir_do.
2260 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2262 * Makefile.in (install): Get the library name right here too.
2263 Don't install bfd.h, since it's unrelated to this library. No
2264 subdirs to recurse into, either.
2265 (CFILES): The source file has a .c suffix, not .o.
2267 * sparc-opc.c: New file, moved from BFD.
2268 * Makefile.in (OFILES): Build it.
2270 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2272 * z8k-dis.c: fixed forward refferences of some declarations.
2274 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2276 * Makefile.in: get the name of the library right
2278 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2280 * z8k-dis.c: knows how to disassemble z8k stuff
2281 * z8k-opc.h: new file full of z8000 opcodes
2285 version-control: never
projects / deliverable / binutils-gdb.git / blob