2 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-opc.c (insert_d22, extract_d22): New functions.
5 (v850_operands): Use insert_d22 and extract_d22 for
7 (insert_d9): Fix range check.
9 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
11 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
12 and set bits field to D9 and D22 operands.
14 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
16 * v850-opc.c (v850_operands): Define SR2 operand.
17 (v850_opcodes): "ldsr" uses R1,SR2.
19 * v850-opc.c (v850_opcodes): Fix opcode specs for
20 sld.w, sst.b, sst.h, sst.w, and nop.
22 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
24 * v850-opc.c (v850_opcodes): Add null opcode to mark the
25 end of the opcode table.
29 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
31 * d10v-opc.c (pre_defined_registers): Added register pairs,
32 "r0-r1", "r2-r3", etc.
36 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
38 * v850-opc.c (v850_operands): Make I16 be a signed operand.
39 Create I16U for an unsigned 16bit mmediate operand.
40 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
42 * v850-opc.c (v850_operands): Define EP operand.
43 (IF4A, IF4B, IF4C, IF4D): Use EP.
45 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
46 with immediate operand, "movhi". Tweak "ldsr".
48 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
49 correct. Get sld.[bhw] and sst.[bhw] closer.
51 * v850-opc.c (v850_operands): "not" is a two byte insn
53 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
55 * v850-opc.c (v850_operands): D16 inserts at offset 16!
57 * v850-opc.c (two): Get order of words correct.
59 * v850-opc.c (v850_operands): I16 inserts at offset 16!
61 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
62 register source and destination operands.
63 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
65 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
66 same thinko in "trap" opcode.
68 * v850-opc.c (v850_opcodes): Add initializer for size field
71 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
72 Add D8 for 8-bit unsigned field in short load/store insns.
73 (IF4A, IF4D): These both need two registers.
74 (IF4C, IF4D): Define. Use 8-bit unsigned field.
75 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
76 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
77 for "ldsr" and "stsr".
78 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
81 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
82 short store word (sst.w).
84 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
86 * v850-opc.c (v850_operands): Added insert and extract fields,
87 pointers to functions that handle unusual operand encodings.
89 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
91 * v850-opc.c (v850_opcodes): Enable "trap".
93 * v850-opc.c (v850_opcodes): Fix order of displacement
94 and register for "set1", "clr1", "not1", and "tst1".
96 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
98 * v850-opc.c (v850_operands): Add "B3" support.
99 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
102 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
104 * v850-opc.c: Close unterminated comment.
106 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
108 * v850-opc.c (v850_operands): Add flags field.
109 (v850_opcodes): add move opcodes.
111 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
113 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
114 * configure: (bfd_v850v_arch) Add new case.
115 * configure.in: (bfd_v850_arch) Add new case.
116 * v850-opc.c: New file.
119 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
121 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
124 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
126 * d10v-opc.c: Add additional information to the opcode
127 table to help determinine which instructions can be done
131 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
133 * mpw-make.sed: Update editing of include pathnames to be
136 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
138 * arm-opc.h: Added "bx" instruction definition.
140 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
142 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
145 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
147 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
149 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
151 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
154 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
156 * makefile.vms: Update for alpha-opc changes.
158 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
160 * i386-dis.c (print_insn_i386): Actually return the correct value.
161 (ONE, OP_ONE): #ifdef out; not used.
164 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
166 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
167 Changed subi operand type to treat 0 as 16.
170 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
172 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
175 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
177 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
178 memory transfer instructions. Add new format string entries %h and %s.
179 * arm-dis.c: (print_insn_arm): Provide decoding of the new
183 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
185 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
186 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
189 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
191 * alpha-dis.c (print_insn_alpha_osf): Remove.
192 (print_insn_alpha_vms): Remove.
193 (print_insn_alpha): Make globally visible. Chose the register
194 names based on info->flavour.
195 * disassemble.c: Always return print_insn_alpha for the alpha.
198 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
200 * d10v-dis.c (dis_long): Handle unknown opcodes.
202 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
204 * d10v-opc.c: Changes to support signed and unsigned numbers.
205 All instructions with the same name that have long and short forms
206 now end in ".l" or ".s". Divs added.
207 * d10v-dis.c: Changes to support signed and unsigned numbers.
209 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
211 * d10v-dis.c: Change all functions to use info->print_address_func.
214 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
216 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
217 move ccr/sr insns more strict so that the disassembler only
218 selects them when the addressing mode is data register.
221 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
222 * d10v-opc.c (pre_defined_registers): Declare.
223 * d10v-dis.c (print_operand): Now uses pre_defined_registers
224 to pick a better name for the registers.
227 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
229 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
230 operands for fexpand and fpmerge. From Christian Kuehnke
231 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
233 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
235 * alpha-dis.c (print_insn_alpha): No longer the user-visible
236 print routine. Take new regnames and cpumask arguments.
237 Kill the environment variable nonsense.
238 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
239 (print_insn_alpha_vms): New function. Do VMS style regnames.
240 * disassemble.c (disassembler): Test bfd flavour to pick
241 between OSF and VMS routines. Default to OSF.
243 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
245 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
246 * configure: Rebuild.
247 * Makefile.in (install): Use @INSTALL_SHLIB@.
250 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
252 * configure: (bfd_d10v_arch) Add new case.
253 * configure.in: (bfd_d10v_arch) Add new case.
254 * d10v-dis.c: New file.
255 * d10v-opc.c: New file.
256 * disassemble.c (disassembler) Add entry for d10v.
259 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
261 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
262 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
264 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
266 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
267 distinguish between variants of the instruction set.
268 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
269 distinguish between variants of the instruction set.
271 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
273 * i386-dis.c (print_insn_i8086): New routine to disassemble using
274 the 8086 instruction set.
275 * i386-dis.c: General cleanups. Make most things static. Add
276 prototypes. Get rid of static variables aflags and dflags. Pass
277 them as args (to almost everything).
279 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
281 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
283 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
285 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
286 if the next arg is marked with SRC_IN_DST. Gross.
288 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
289 we're looking for and find EXR.
291 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
292 if we're looking for KBIT and we don't find it.
294 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
297 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
298 3bit immediate operands.
300 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
302 * Released binutils 2.7.
304 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
305 <kkaempf@progis.ac-net.de>.
307 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
309 * alpha-opc.c: Correct second case of "mov" to use OPRL.
311 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
313 * sparc-dis.c (print_insn_sparclite): New routine to print
314 sparclite instructions.
316 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
318 * m68k-opc.c (m68k_opcodes): Add coldfire support.
320 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
322 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
323 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
324 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
326 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
328 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
329 Use autoconf-set values.
330 (docdir, oldincludedir): Removed.
331 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
333 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
335 * alpha-opc.c: New file.
336 * alpha-opc.h: Remove.
337 * alpha-dis.c: Complete rewrite to use new opcode table.
338 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
339 * configure: Rebuild with autoconf 2.10.
340 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
341 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
343 (alpha-opc.o): New target.
345 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
347 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
348 Set imm_added_to_rs1 even if the source and destination register
351 * sparc-opc.c: Add some two operand forms of the wr instruction.
353 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
355 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
358 * disassemble.c (disassembler): Handle H8/S.
359 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
361 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
363 * sparc-opc.c: Add beq/teq as aliases for be/te.
365 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
366 <sergei@msil.sps.mot.com>.
368 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
370 * makefile.vms: New file.
372 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
374 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
376 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
379 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
381 * i386-dis.c (OP_OFF): Call append_prefix.
383 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
385 * ppc-opc.c (instruction encoding macros): Add explicit casts to
386 unsigned long to silence a warning from the Solaris PowerPC
389 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
391 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
393 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
395 * sparc-dis.c (X_IMM,X_SIMM): New macros.
397 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
398 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
399 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
400 cpush, cpusha, cpull sparclet insns.
402 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
404 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
406 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
408 * sparc-opc.c: Set F_FBR on floating point branch instructions.
409 Set F_FLOAT on other floating point instructions.
411 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
413 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
415 (powerpc_opcodes): Add 860/821 specific SPRs.
417 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
419 * configure.in: Permit --enable-shared to specify a list of
420 directories. Set and substitute BFD_PICLIST.
421 * configure: Rebuild.
422 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
423 uses. Set to @BFD_PICLIST@.
425 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
427 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
428 not "abs", which may be needed for the absolute in something
429 like btst #0,@10:8. Print L_3 immediates separately from other
430 immediates. Change ABSMOV reference to ABS8MEM.
432 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
434 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
435 (current_arch_mask): New static global.
436 (compute_arch_mask): New static function.
437 (print_insn_sparc): Delete sparc_v9_p. New static local
438 current_mach. Resort opcode table if current_mach changes.
439 Generalize "insn not supported" test.
440 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
441 Delete test for v9/!v9.
442 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
444 (brfc): Split into CBR and FBR for coprocessor/fp branches.
445 (brfcx): Renamed to FBRX.
446 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
447 coprocessor mnemonics are not supported on the sparclet).
448 (condf): Renamed to CONDF.
449 (SLCBCC2): Delete F_ALIAS flag.
451 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
453 * sparc-opc.c (sparc_opcodes): rd must be 0 for
454 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
456 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
458 * Makefile.in (config.status): Depend upon BFD VERSION file, so
459 that the shared library version number is set correctly.
461 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
463 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
464 Miles Bader <miles@gnu.ai.mit.edu>.
465 * configure: Rebuild.
467 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
469 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
472 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
474 * configure: Rebuild with autoconf 2.8.
476 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
478 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
479 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
481 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
483 * configure.in: Don't set SHLIB or SHLINK to an empty string,
484 since they appear as targets in Makefile.in.
485 * configure: Rebuild.
487 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
489 * mpw-make.sed: Edit out shared library support bits.
491 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
493 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
494 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
495 (sparc_opcodes): Add sparclet insns.
496 (sparclet_cpreg_table): New static local.
497 (sparc_{encode,decode}_sparclet_cpreg): New functions.
498 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
500 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
502 * i386-dis.c (index16): New static variable.
503 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
505 (OP_indirE): Return result of OP_E.
506 (OP_E): Check for 16 bit addressing mode, and disassemble
507 correctly. Optimised 32 bit case a little. Don't print
508 "(base,index,scale)" when sib specifies only an offset.
510 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
512 * configure.in: Set and substitute SHLIB_DEP.
513 * configure: Rebuild.
514 * Makefile.in (SHLIB_DEP): New variable.
515 (LIBIBERTY_LISTS, BFD_LIST): New variables.
516 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
517 COMMON_SHLIB, add them to piclist with appropriate modifications.
518 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
519 here: just use piclist.
521 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
523 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
524 (print_insn_sparc): Rewrite v9/not-v9 tests.
525 (compare_opcodes): Likewise.
526 * sparc-opc.c (MASK_<ARCH>): Define.
527 (v6,v7,v8,sparclite,v9,v9a): Redefine.
528 (sparclet,v6notv9): Define.
529 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
530 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
532 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
534 * configure.in: Call AC_PROG_CC before configure.host.
535 * configure: Rebuild.
537 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
539 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
541 * i386-dis.c (onebyte_has_modrm): New static array.
542 (twobyte_has_modrm): New static array.
543 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
545 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
547 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
550 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
552 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
555 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
557 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
558 m68010up, not just m68020up | cpu32.
560 * Makefile.in (SONAME): New variable.
561 ($(SHLINK)): Make a link to the transformed name, as well.
562 (stamp-tshlink): New target.
563 (install): Skip stamp-tshlink during install.
565 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
567 * configure.in: Call AC_ARG_PROGRAM.
568 * configure: Rebuild.
569 * Makefile.in (program_transform_name): New variable.
570 (install): Transform library name before installing it.
572 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
574 * i960-dis.c (mem): Add HX dcinva instruction.
576 Support for building as a shared library, based on patches from
577 Alan Modra <alan@spri.levels.unisa.edu.au>:
578 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
579 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
580 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
581 * configure: Rebuild.
582 * Makefile.in (ALLLIBS): New variable.
583 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
584 (COMMON_SHLIB, SHLINK): New variables.
585 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
586 (STAGESTUFF): Remove variable.
587 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
588 (stamp-piclist, piclist): New targets.
589 ($(SHLIB), $(SHLINK)): New targets.
590 ($(OFILES)): Depend upon stamp-picdir.
591 (disassemble.o): Build twice if PICFLAG is set.
592 (MOSTLYCLEAN): Add pic/*.o.
593 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
594 (distclean): Remove pic and stamp-picdir.
595 (install): Install shared libraries.
596 (stamp-picdir): New target.
598 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
600 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
601 Print unknown instruction as "unknown", rather than in hex.
603 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
605 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
607 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
609 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
611 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
613 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
614 when necessary. From Ulrich Drepper
615 <drepper@myware.rz.uni-karlsruhe.de>.
617 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
619 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
620 sparc_num_opcodes. Update architecture enum values.
621 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
622 (sparc_opcode_lookup_arch): New function.
623 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
624 (sparc_opcodes): Add v9a shutdown insn.
626 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
628 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
629 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
631 (print_insn_sparc64): Deleted.
632 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
635 * sparc-opc.c (architecture_pname): Add v9a.
637 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
639 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
640 incorrectly defined as 0x16 when it should be 0x15.
641 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
642 (alpha_insn_set): added cvtst and cvttq float ops. Also added
643 excb (exception barrier) which is defined in the Alpha
644 Architecture Handbook version 2.
645 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
646 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
647 disassembled as or, for example.
649 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
651 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
652 (_print_insn_mips): Change i from int to unsigned int.
654 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
656 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
657 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
659 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
661 * i386-dis.c: Added Pentium Pro instructions.
663 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
665 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
668 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
670 * sh-opc.h (sh_nibble_type): Added REG_B.
671 (sh_arg_type): Added A_REG_B.
672 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
674 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
676 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
678 * disassemble.c (disassembler): Use new bfd_big_endian macro.
680 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
682 * Makefile.in (distclean): Remove stamp-h. From Ronald
683 F. Guilmette <rfg@monkeys.com>.
685 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
687 From David Mosberger-Tang <davidm@azstarnet.com>:
688 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
691 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
693 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
694 (sh_table): Added many SH3 opcodes.
695 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
697 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
699 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
700 (subco,subco.): Mark this PPC, not PPCCOM.
702 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
704 * configure: Rebuild with autoconf 2.7.
706 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
708 * configure: Rebuild with autoconf 2.6.
710 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
712 * configure.in: Sort list of architectures. Accept but do nothing
713 for alliant, convex, pyramid, romp, and tahoe.
715 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
717 * a29k-dis.c (print_special): Change num to unsigned int.
719 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
721 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
724 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
726 * configure.in: Call AC_CHECK_PROG to find and cache AR.
727 * configure: Rebuilt.
729 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
731 * configure.in: Add case for bfd_i860_arch.
732 * configure: Rebuild.
734 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
736 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
737 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
738 (NEXTDOUBLE): Likewise.
739 (print_insn_m68k): Don't match fmoveml if there is more than one
740 register in the list.
741 (print_insn_arg): Handle a place of '8' for a type of 'L'.
743 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
745 * m68k-opc.c: Use #W rather than #w.
746 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
748 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
750 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
751 and likewise for all the dbxx opcodes.
753 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
755 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
757 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
759 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
760 the VR4100 specific instructions to the mips_opcodes structure.
762 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
764 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
765 ugly Metrowerks bug in CW6, is fixed in CW7.
767 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
769 * ppc-opc.c (whole file): Add flags for common/any support.
771 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
773 * Makefile.in (BISON): Remove macro.
774 (FLAGS_TO_PASS): Remove BISON.
776 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
778 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
780 * m68k-dis.c (print_insn_m68k): Recognize all two-word
781 instructions that take no args by looking at the match mask.
782 (print_insn_arg): Always print "%" before register names.
783 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
784 [case '_']: Don't print "@#" before address.
785 [case 'J']: Use "%s" as format string, not register name.
786 [case 'B']: Treat place == 'C' like 'l' and 'L'.
788 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
790 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
793 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
795 From David Mosberger-Tang <davidm@azstarnet.com>
797 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
798 (alpha_insn_set): added definitions for VAX floating point
799 instructions (Unix compilers don't generate these, but handcoded
800 assembly might still use them).
802 * alpha-dis.c (print_insn_alpha): added support for disassembling
803 the miscellaneous instructions in the Alpha instruction set.
805 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
807 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
808 no longer create sysdep.h, sed ppc-opc.c to work around a
809 serious Metrowerks C bug.
810 * mpw-make.in: Remove.
811 * mpw-make.sed: New file, used by mpw-configure to edit
812 Makefile.in into an MPW makefile.
814 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
816 * Makefile.in (maintainer-clean): New synonym for realclean.
818 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
820 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
821 which use '0', '1', and '2' instead. Specify the proper size for
822 a pmove immediate operand. Correct the pmovefd patterns to be
823 moves to a register, not from a register.
824 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
826 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
828 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
829 %psr, %wim, %tbr as F_NOTV9.
831 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
833 * Makefile.in (Makefile): Just rebuild Makefile when running
835 (config.h, stamp-h): New targets.
836 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
837 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
839 * configure: Rebuild.
841 * mips-opc.c: Change unaligned loads and stores with "t,A"
842 operands to use "t,A(b)".
844 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
846 * sh-dis.c (print_insn_shx): Add F_FR0 support.
848 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
850 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
851 until 3 instead of until 2.
853 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
855 * Makefile.in (ALL_CFLAGS): Define.
856 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
857 (MOSTLYCLEAN): Add config.log.
858 (distclean): Don't remove config.log.
859 * configure.in: Substitute HDEFINES.
860 * configure: Rebuild.
862 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
864 * sh-opc.h (sh_arg_type): Add F_FR0.
865 (sh_table, case fmac): Add F_FR0 as first argument.
867 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
869 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
871 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
873 * sparc-dis.c: Remove all references to NO_V9.
875 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
877 * aclocal.m4: Just include ../bfd/aclocal.m4.
878 * configure: Rebuild.
880 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
882 * sparc-dis.c (X_DISP19): Define.
883 (print_insn, case 'G'): Use it.
884 (print_insn, case 'L'): Sign extend displacement.
886 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
888 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
889 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
890 host_makefile_frag or frags.
891 * aclocal.m4: New file.
892 * configure: Rebuild.
893 * Makefile.in (INSTALL): Set to @INSTALL@.
894 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
895 (INSTALL_DATA): Set to @INSTALL_DATA@.
897 (AR_FLAGS): Set to rc rather than qc.
898 (CC): Define as @CC@.
899 (CFLAGS): Set to @CFLAGS@.
900 (@host_makefile_frag@): Remove.
901 (config.status): Remove dependency upon @frags@.
903 * configure.in: ../bfd/config.bfd now just sets shell variables.
904 Use them rather than looking through target Makefile fragments.
905 * configure: Rebuild.
907 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
909 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
911 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
913 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
914 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
917 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
918 (lookup_{name,value}): New functions.
919 (prefetch_table): New static local.
920 (sparc_{encode,decode}_prefetch): New functions.
921 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
923 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
925 * sh-opc.h: Add blank lines to improve readabililty of sh3e
928 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
930 * sh-dis.c: Correct comment on first line of file.
932 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
934 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
936 * sparc-opc.c (asi, membar): New static locals.
937 (sparc_{encode,decode}_{asi,membar}): New functions.
938 (sparc_opcodes, membar insn): Fix.
939 * sparc-dis.c (print_insn): Call sparc_decode_asi.
940 Support decoding of membar masks.
943 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
945 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
947 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
949 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
950 and likewise for the other branches. Add bhs as an alias for bcc,
951 and likewise for the size variants. Add dbhs as an alias for
954 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
956 * sh-opc.h (FP sts instructions): Update to match reality.
958 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
960 * m68k-dis.c: (fpcr_names): Add % before all register names.
961 (reg_names): Likewise.
962 (print_insn_arg): Don't explicitly print % before register names.
963 Add % before register names in static array names. In case 'r',
964 print data registers as `@(Dn)', not `Dn@'. When printing a
965 memory address, don't print @# before it.
966 (print_indexed): Change base_disp and outer_disp from int to
967 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
968 syntax. Sign extend 8 byte displacement correctly.
969 (print_base): Print using MIT syntax. Print zpc when appropriate.
970 Change parameter disp from int to bfd_vma.
972 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
975 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
977 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
978 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
979 * sh-opc.h (sh_arg_type): Add new operand types.
980 (sh_table): Add new opcodes from SH3E Floating Point ISA.
982 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
984 * Makefile.in (distclean): Remove generated file config.h.
986 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
988 * Makefile.in (distclean): Remove generated file config.h.
990 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
992 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
994 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
996 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
997 rather than numopcodes. Use m68k_opcodes rather than removed
998 opcode function. Don't check F_ALIAS.
999 (print_insn_arg): Change first parameter to be const char *.
1000 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1001 (m68k-opc.o): New target.
1002 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1003 * configure: Rebuild.
1005 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1007 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1008 (opcode_bits, opcode_hash_table): New variables.
1009 (opcodes_initialized): Renamed from opcodes_sorted.
1010 (build_hash_table): New function.
1011 (is_delayed_branch): Use hash table.
1012 (print_insn): Renamed from print_insn_sparc, made static.
1013 Build and use hash table. If !sparc64, ignore sparc64 insns,
1014 and vice-versa if sparc64.
1015 (print_insn_sparc, print_insn_sparc64): New functions.
1016 (compare_opcodes): Move sparc64 opcodes to end.
1017 Print commutative insns with constant second.
1018 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1020 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1022 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1023 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1024 avoids printing a delay slot in a delay slot.
1025 * sh-opc.h (sh_table): Fully bracket last entry.
1027 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1029 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1031 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1033 * configure.in: Get host_makefile_frag from ${srcdir}.
1035 * configure.in: Autoconfiscated. Check for string[s].h. Create
1036 config.h from config.in. Don't set up sysdep.h link.
1037 * sysdep.h: New file.
1038 * configure, config.in: New files, generated from configure.in.
1039 * Makefile.in: Updated to be processed autoconf-style.
1040 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1041 (Makefile): Depend on config.status.
1042 (config.status): New rule.
1043 * configure.bat: Update Makefile substitutions.
1045 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1047 * mips-opc.c (L1): Define.
1048 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1049 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1052 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1054 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1055 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1056 have multiple add units but only a single logical unit.
1058 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1059 shifted by 18, without any insertion or extraction function.
1060 (insert_cr, extract_cr): Remove.
1063 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1065 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1068 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1070 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1073 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1075 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1076 * sh-opc.h: Add copyright.
1078 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1080 * Makefile.in (crunch-m68k): Delete extra target accidentally
1081 checked in a while ago.
1083 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1085 * sh-opc.h (sh_table): Add SH3 support.
1087 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1089 * sh-opc.h: Added bsrf and braf.
1091 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1093 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1094 bogus [ls]fm{ea,fd} patterns.
1096 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1097 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1098 initialize it from memory. Make function static.
1099 (print_insn_{big,little}_arm): New functions.
1100 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1101 the correct endianness.
1104 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1106 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1107 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1110 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1112 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1115 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1117 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1118 17th, so that it builds again using GCC as the compiler.
1120 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1122 * mips-dis.c (print_insn_little_mips): Cast return value from
1123 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1124 expects an unsigned long, and that might be fewer words of
1125 argument storage (e.g., if bfd_vma is long long on a 32-bit
1127 (print_insn_big_mips): Likewise with bfd_getb32 value.
1128 (_print_insn_mips): Now static.
1130 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1132 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1133 gcc memory hog problem with initializer is fixed.
1136 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1138 * arc-opc.c (NULL): Define.
1139 (arc_operands, insn fields u,s): Delete.
1140 (arc_operands, insn fields a,b,c): Mark as signed.
1141 (arc_opcodes): No longer const, links computed at run-time.
1142 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1143 suffixes that affect the insn code.
1144 (arc_opcodes): Resort table to macros are first.
1145 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1146 (arc_opcodes, st [b] entry): Likewise.
1147 (arc_opcodes, st [b,d] entry): Fix mask, value.
1148 (arc_reg_names): Add entries for r29, r30, r31, r60.
1149 (opcode_map, icode_map): New static globals.
1150 (arc_opcode_init_tables): Initialize them.
1151 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1152 (insert_shimmoffset): Signal error if register present.
1154 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1157 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1159 Merge in support for Mac MPW as a host.
1160 (Old change descriptions retained for informational value.)
1162 * mpw-config.in (archname): Compute from the config.
1163 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1165 * mpw-config.in (target_arch): Compute from canonical target.
1166 (m68k, mips, powerpc, sparc): Add architectures.
1167 * mpw-make.in (disassemble.c.o): Add.
1168 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1170 * mpw-config.in (BFD_MACHINES): Set to a default value.
1171 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1173 * mpw-make.in (CSEARCH): Add extra-include to search path.
1175 * mpw-config.in (varargs.h): Don't create.
1176 (sysdep.h): Create using forward-include.
1177 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1179 * mpw-config.in: New file, MPW version of configure.in.
1180 * mpw-make.in: New file, MPW version of Makefile.in.
1183 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1185 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1186 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1187 (print_insn_*): Pass bfd mach number, not opcode version.
1188 * arc-opc.c (arc_get_opcode_mach): New function.
1191 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1193 * alpha-dis.c (print_insn_alpha): Put empty statement after
1196 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1198 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1199 (low_sign_extend): Likewise.
1200 (get_field): Delete unused function.
1201 (set_field, deposit_14, deposit_21): Likewise.
1203 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1205 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1208 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1210 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1212 * alpha-opc.h (OSF_ASMCODE): define
1213 print pal-code names as defined in App C of the
1214 Alpha Architecture Reference Manual
1216 * alpha-dis.c: cleaned up output
1217 print stylized code forms as defined in App A.4.3 of the
1218 Alpha Architecture Reference Manual
1220 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1222 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1224 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1227 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1229 * m68k-dis.c (opcode): New function. Returns address of opcode
1230 table entry given index, even if the opcode table was split to
1231 work around gcc bugs.
1232 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1234 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1235 (reg_names): Now const.
1236 (print_insn_arg): Arrays cacheFieldName and names now const.
1237 (print_indexed): Array scales now const.
1240 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1242 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1243 (print_insn_arc_{host,graphics,audio}): Likewise.
1244 (print_insn): Add prototype.
1245 (arc_get_disassembler): New arg `big_p'. Return little or big
1246 print fn accordingly.
1247 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1248 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1249 (arc_opval_supported): Likewise.
1250 * disassemble.c (disassembler): Pass big endian flag to
1251 arc_get_disassembler.
1254 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1256 * ppc-opc.c: Sort recently added instructions by minor opcode
1257 number within major opcode number.
1259 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1261 * hppa-dis.c: Include libhppa.h.
1263 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1265 * mips-opc.c: Change dli to use M_DLI, and add dla.
1267 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1269 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1272 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1274 * arc-dis.c (arc_get_disassembler): Change argument to int,
1275 one of bfd_mach_arc_xxx. All callers updated.
1278 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1280 * mips-opc.c: Add r4650 mul instruction.
1282 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1284 * mips-opc.c: Add uld and usd macros for unaligned double load and
1287 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1289 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1290 mfdcr, mtdcr, icbt, iccci.
1293 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1295 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1296 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1297 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1298 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1299 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1300 (insert_absaddr): New function.
1302 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1304 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1305 New argument `cpu', pass it to arc_opcode_init_tables.
1306 Document byte order dependencies. Ignore unsupported insns.
1307 (arc_get_disassembler): New function.
1308 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1309 print_insn_arc_audio): New functions.
1310 * arc-opc.c (MULTSHIFT operand): Delete.
1311 (UNSIGNED, SATURATION): New operands.
1312 (mac, mul, mul64, mulu64): New insns.
1313 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1314 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1315 (host,graphics,audio extended and auxiliary regs): Define.
1316 (ss, sc, mh, ml): New suffixes.
1317 (arc_opcode_supported, arc_opval_supported): New functions.
1318 (insert_multshift, extract_multshift): Deleted.
1319 * disassemble.c (disassembler, case bfd_arch_arc): Call
1320 arc_get_disassembler to get disassembler routine.
1323 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1325 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1326 signed char fields to shorts, more portable.
1328 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1330 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1331 char fields as signed chars, since they may have negative values.
1333 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1335 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1336 (mycroft@netbsd.org).
1338 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1340 From "Logg, Ed" <elogg@ea.com>:
1341 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1342 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1345 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1347 * ppc-opc.c: Changes based on patch from David Edelsohn
1348 <edelsohn@mhpcc.edu>.
1349 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1352 (insert_tbr): New static function.
1353 (extract_tbr): New static function.
1354 (XFXFXM_MASK, XFXM): Define.
1355 (XSPRBAT_MASK, XSPRG_MASK): Define.
1356 (powerpc_opcodes): Add instructions to access special registers by
1357 name. Add mtcr and mftbu.
1359 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1361 * mips-opc.c (P3): Define.
1362 (mips_opcodes): Add mad and madu.
1364 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1366 * configure.in: Add W65 support.
1367 * disassemble.c: Likewise.
1368 * w65-opc.h, w65-dis.c: New files.
1370 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1372 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1376 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1378 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1380 * arc-opc.c (extract_reladdr): New function.
1381 (insert_reladdr): Store address right-shifted by 2.
1384 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1386 * mips-opc.c: Add dli as a synonym for li.
1389 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1391 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1393 (extraction fns): Insn argument now array of two words. Return pointer
1394 to value's table entry. All uses changed.
1395 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1396 (insert_multshift, extract_multshift): New fns.
1397 (arc_operands): Add support for cache bypass suffix. Add support for
1398 predefined aux regs. Modifier bits moved to flags field.
1399 (arc_opcodes): Likewise.
1400 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1401 New insn rlc. Update to syntax in programmer's manual.
1402 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1403 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1405 (arc_opcode_init_tables): New argument to indicate cpu type.
1406 (insert_reg): Handle predefined aux regs.
1407 (extract_reg): Likewise.
1408 (lookup_register): New fn.
1409 * arc-dis.c (arc_condition_codes): Deleted.
1410 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1411 Clean up modifier handling. Handle predefined aux regs.
1414 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1416 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1417 print something for reserved opcode values, even if it won't
1420 * mips-dis.c (_print_insn_mips): When initializing, shift right
1421 and mask, to avoid sign extension problems on the Alpha.
1423 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1427 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1429 * configure.in: Add ARC support.
1430 * disassemble.c: Likewise.
1431 * arc-dis.c, arc-opc.c: New files.
1434 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1436 * sh-opc.h (mov.l gbr): Get direction right.
1437 * sh-dis.c (print_insn_shx): New function.
1438 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1439 print opcodes with right byte order.
1441 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1443 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1444 to avoid conflicts with getopt.
1446 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1448 * hppa-dis.c (print_insn_hppa): Read the instruction using
1449 bfd_getb32, so that it works on a little endian or 64 bit host.
1450 Remove unused local variable op.
1452 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1454 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1455 addu does not work correctly if -mips3.
1457 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1459 * a29k-dis.c (print_special): Add special register names defined
1460 on 29030, 29040 and 29050.
1461 (print_insn): Handle new operand type 'I'.
1463 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1465 * Makefile.in (INSTALL): Use top level install.sh script.
1467 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1469 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1470 that it works on a little endian host.
1472 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1474 * configure.in: Use ${config_shell} when running config.bfd.
1476 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1478 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1480 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1482 * a29k-dis.c (print_insn): Print the opcode.
1484 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1486 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1488 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1490 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1492 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1494 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1495 which store a value into memory.
1497 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1499 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1500 * arm-dis.c, arm-opc.h: New files.
1502 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1504 * Makefile.in (ns32k-dis.o): Add dependency.
1505 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1506 string, not as array of chars.
1508 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1510 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1512 * sparc-opc.c: Added sparclite extended FP operations, and
1513 versions of v9 impdep* instructions permitting specification of
1516 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1518 * i960-dis.c (reg_names): Now const.
1519 (struct sparse_tabent): New type, copied from array type in mem
1521 (ctrl): Local static array ctrl_tab now const.
1522 (cobr): Local static array cobr_tab now const.
1523 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1524 static variable mem_tab no longer explicitly initialized. Changed
1525 mem_init to const array of struct sparse_tabent.
1526 (reg): Local static variable reg_tab no longer explicitly
1527 initialized. Changed reg_init to const array of struct
1529 (ea): Local static array scale_tab now const.
1531 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1534 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1536 * configure.bat: the disassember needs to be enabled for
1537 "objdump -d" to work in djgpp.
1539 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1541 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1542 (invalid_float): Enabled general version, doesn't require running
1543 on ns32k host. Changed to take char* argument, and test for
1544 explicitly specified sizes, instead of using sizeof() on host CPU
1546 (INVALID_FLOAT): Cast first argument.
1547 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1548 list_P032, list_M032): Now const.
1549 (optlist, list_search): Made appropriate arguments now point to
1551 (print_insn_arg): Changed static array of one-character-string
1552 pointers into a static const array of characters; fixed sprintf
1553 statement accordingly.
1555 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1557 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1558 from distribution. A ns32k-dis.c from a previous distribution has
1559 been brought up to date and supports the new interface.
1561 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1563 * configure.in: add bfd_ns32k_arch target support.
1565 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1566 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1568 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1570 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1573 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1575 * h8300-dis.c, mips-dis.c: Don't use true and false.
1577 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1579 * configure.in: Change --with-targets to --enable-targets.
1581 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1583 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1584 opcodes to the first instruction with that opcode, to speed
1585 disassembly of large files. From ralphc@pyramid.com (Ralph
1588 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1590 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1592 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1594 * configure.bat: update to latest makefile.in
1596 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1598 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1599 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1600 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1601 slot insn is in a delay slot.
1602 * z8k-opc.h: (resflg): Fix patterns.
1603 * h8500-opc.h Fix CR insn patterns.
1605 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1607 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1608 "cmpl" before POWER versions, so that gas -many uses them.
1610 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1612 * disassemble.c: New file.
1613 * Makefile.in (OFILES): Add disassemble.o.
1614 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1615 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1616 binutils/configure.in.
1618 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1619 opcode being examined.
1621 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1623 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1624 (insert_ral, insert_ram, insert_ras): New functions.
1625 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1626 RAS for store with update.
1628 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1630 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1631 (edelsohn@npac.syr.edu).
1633 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1635 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1638 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1640 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1642 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1644 * ppc-opc.c (powerpc_operands): The signedp field has been
1645 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1646 instead. Add new operand SISIGNOPT.
1647 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1648 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1649 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1652 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1654 * i386-dis.c (struct private): Renamed to dis_private. `private'
1655 is a reserved word for dynix cc.
1657 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1659 * configure.in: Change error message to refer to bfd/config.bfd
1660 rather than bfd/configure.in.
1662 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1664 * ppc-opc.c: Define POWER2 as short alias flag.
1665 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1668 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1670 * i960-dis.c (print_insn_i960): Don't read a second word for
1671 opcodes 0, 1, 2 and 3.
1673 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1675 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1677 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1679 * m68881-ext.c: Removed; no longer used.
1680 * Makefile.in: Changed accordingly.
1682 * m68k-dis.c (ext_format_68881): Don't declare.
1683 (print_insn_m68k): If an instruction uses place 'i', it uses at
1684 least four fixed bytes.
1685 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1686 extended float, convert to double using floatformat_to_double, not
1687 ieee_extended_to_double, and fetch the data before converting it.
1689 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1691 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1692 davidj@ICSI.Berkeley.EDU (David Johnson).
1694 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1696 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1697 PowerPC uses bdnz[l][a].
1699 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1701 * dis-buf.c, i386-dis.c: Include sysdep.h.
1703 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1705 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1707 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1708 by Motorola PowerPC 601 with PPC_OPCODE_601.
1709 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1710 Disassemble Motorola PowerPC 601 instructions as well as normal
1711 PowerPC instructions.
1713 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1715 * i960-dis.c (reg, mem): Just use a static array instead of
1718 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1720 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1721 condition name index if this is for a negated condition.
1723 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1724 Floating point format for 'H' operand is backwards from normal
1725 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1726 operands (fmpyadd and fmpysub), handle bizarre register
1727 translation correctly for single precision format.
1729 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1730 or 'I' operands if the next format specifier is 'M' (fcmp
1731 condition completer).
1733 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1735 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1736 single number giving a bitmask for the MB and ME fields of an M
1737 form instruction. Change NB to accept 32, and turn it into 0;
1738 also turn 0 into 32 when disassembling. Seperated SH from NB.
1739 (insert_mbe, extract_mbe): New functions.
1740 (insert_nb, extract_nb): New functions.
1741 (SC_MASK): Mask out SA and LK bits.
1742 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1743 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1744 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1745 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1746 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1747 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1748 (powerpc_macros): Define table of macro definitions.
1749 (powerpc_num_macros): Define.
1751 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1752 if PPC_OPERAND_NEXT is set.
1754 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1756 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1757 char. Retrieve contents using bfd_getl32 instead of shifting.
1759 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1761 * ppc-opc.c: New file. Opcode table for PowerPC, including
1762 opcodes for POWER (RS/6000).
1763 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1764 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1765 (CFILES): Add ppc-dis.c.
1766 (ppc-dis.o, ppc-opc.o): New targets.
1767 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1769 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1771 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1772 No space before 'u', 'f', or 'N'.
1774 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1776 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1777 farther than we should.
1779 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1781 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1783 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1785 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1787 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1788 needs it, to prevent reading past the end of a section.
1790 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1792 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1793 Removed t,A case for la; always use t,A(b) case.
1795 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1797 From Ted Lemen <mellon@pepper.ncd.com>
1798 * mips-dis.c (print_insn_arg): Handle 'k'.
1799 * mips-opc.c: Make cache use k, not t.
1801 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1803 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1804 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1805 FLOAT_FORMAT_CODE to put out floating point register names.
1807 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1809 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1811 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1813 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1815 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1817 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1818 larger than 32. Moved dsxx32 variants first for disassembler.
1820 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1822 * z8kgen.c, z8k-opc.h: Add full lda information.
1824 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1826 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1827 movb instructions. Any necessary space will be emitted by
1828 the code to handle nullification completers.
1830 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1832 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1834 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1836 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1837 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1839 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1841 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1843 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1845 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1846 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1848 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1850 * m88k-dis.c (m88kdis): comment change. Remove space after
1852 (printop): handle new arg types DEC and XREG for m88110.
1854 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1856 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1857 type for absolute branch addresses. Delete special
1858 "ble" and "be" code in 'W' operand code.
1860 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1862 * mips-opc.c: Set hazard information correctly for branch
1863 likely instructions.
1865 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1867 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1868 info->fprintf_func for printing and info->print_address_func for
1871 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1873 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1875 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1877 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1878 Corrected second case of "b" for disassembler.
1880 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1882 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1883 to BFD swapping routines to correspond to BFD name changes.
1885 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1887 * mips-opc.c: Change div machine instruction to be z,s,t rather
1888 than s,t. Change div macro to be d,v,t rather than d,s,t.
1889 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1890 rem and remu which generates only the corresponding div
1891 instruction. This is for compatibility with the MIPS assembler,
1892 which only generates the simple machine instruction when an
1893 explicit destination of $0 is used.
1894 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1896 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1898 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1899 WR_31 hazard for bal, bgezal, bltzal.
1901 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1903 * hppa-dis.c (print_insn_hppa): Use print function
1904 from within the disassemble_info, not fprintf_filtered.
1906 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1908 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1909 Law, law@cs.utah.edu.)
1911 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1913 * mips-opc.c ("absu"): Removed.
1916 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1918 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1919 Changed hazard information to distinguish between memory load
1920 delays and coprocessor load delays.
1922 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1924 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1926 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1928 * configure.in: Don't pass cpu to config.bfd.
1930 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1932 * m88k-dis.c (m88kdis): Make class unsigned.
1934 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1936 * alpha-dis.c (print_insn_alpha): One branch format case was
1937 missing the instruction name.
1939 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1941 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1942 Add the arch-specific auxiliary files.
1943 (OFILES): Remove the arch-specific auxiliary files
1944 and use BFD_MACHINES instead of DIS_LIBS.
1945 * configure.in: Set BFD_MACHINES based on --with-targets option.
1947 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1949 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1952 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1954 * sparc-opc.c: Change CONST to const to deal with gcc
1955 -Dconst=__const -traditional.
1957 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1959 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1960 coprocessor instructions out of #if 0, and made them use new
1963 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1965 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1967 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1969 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1970 instruction, for use by the disassembler.
1972 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1973 hand-coded sign extensions that depended on 32-bit host ints.
1974 FIXME, we still depend on big-endian host bitfield ordering.
1975 (sparc_print_insn): Set the insn_info_valid field, and the
1976 other fields that describe the instruction being printed.
1978 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1980 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1981 `jmp' instead of just one of them.
1983 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1985 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1986 (fput_fp_reg_r): Renamed from fput_reg_r.
1987 (fput_fp_reg): New function.
1988 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1990 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1992 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1994 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1996 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1998 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1999 don't output a space.
2001 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2003 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2005 * mips-opc.c: New file, containing opcode table from
2006 ../include/opcode/mips.h.
2007 * Makefile.in: Add it.
2009 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2011 * m88k-dis.c: New file, moved in from gdb and changed to use the
2012 new dis-asm.h disassembler interface.
2013 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2014 (m88k-dis.o): New target.
2016 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2018 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2019 argument string const char * to correspond to opcode/mips.h.
2021 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2023 * mips-dis.c: Updated to account for name changes in new version
2025 * Makefile.in: Added header file dependencies.
2027 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2029 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2031 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2033 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2034 extend, rather than shifts.
2036 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2038 * Makefile.in: Undo 15 June change.
2040 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2042 * m68k-dis.c (print_insn_arg): Change return value to byte count
2044 * m68k-dis.c: Re-write to detect invalid operands before
2045 printing anything, so we can handle this the same way we
2046 handle invalid opcodes.
2048 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2050 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2052 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2054 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2057 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2059 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2061 * configure.in: Do make sysdep.h link.
2062 * Makefile.in: Search ../include. Don't search ../bfd.
2064 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2066 Changes from Jeff Law, law@cs.utah.edu:
2067 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2068 Do not print a space before the completers specified by
2071 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2073 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2074 defined, since gdb has been fixed.
2076 Changes from Jeff Law, law@cs.utah.edu:
2077 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2078 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2079 be a *disassemble_info, not a *FILE.
2080 * hppa-dis.c: Support 'd', '!', and 'a'.
2081 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2082 * hppa-dis.c: Delete cases which are no longer needed.
2084 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2086 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2088 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2090 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2093 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2095 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2096 * configure.in: No longer need to configure to get sysdep.h.
2098 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2100 * Patches from Jeffrey Law <law@cs.utah.edu>.
2101 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2102 templates for 1.1 FP computational instructions.
2104 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2106 * h8500-dis.c (print_insn_h8500): Address argument is type
2108 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2111 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2112 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2114 * sparc-dis.c (compare_opcodes): Move static declaration to
2117 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2119 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2120 instruction, remove unimp hack from 'l' argument.
2122 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2124 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2127 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2129 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2130 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2133 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2135 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2136 arrays of string pointers to 2-d arrays of chars, to save
2139 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2141 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2142 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2144 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2146 * hppa-dis.c: New file from Utah, adapted to new disassembler
2148 * Makefile.in: Include it.
2150 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2152 * sh-dis.c, sh-opc.h: New files.
2154 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2156 * alpha-dis.c, alpha-opc.h: New files.
2158 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2160 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2163 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2165 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2167 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2169 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2172 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2174 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2175 and double percent signs a few places.
2177 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2179 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2180 Use info->print_address_func not print_address.
2182 * dis-buf.c (generic_print_address): New function.
2184 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2186 * Makefile.in: Add sparc-dis.c.
2187 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2189 Add `add' instruction to the set that get checked
2190 for a preceding `sethi' in order to print an absolute address.
2191 * (print_insn): Disassembly prefers real instructions.
2192 (is_delayed_branch): Speed up.
2193 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2194 Still missing some float ops, and needs testing.
2195 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2196 F_ALIAS. Use printf, not fprintf, when not passing a file
2198 (compare_opcodes): Check that identical instructions have
2199 identical opcodes, complain otherwise.
2202 * Include reg_names.
2204 Use dis-asm.h/read_memory_func interface.
2206 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2208 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2209 deliberately return non-zero to setjmp from longjmp. Otherwise
2210 this code fails to compile.
2212 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2214 * m68k-dis.c: Fix prototype for fetch_arg().
2216 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2218 * dis-buf.c: New file, for new read_memory_func interface.
2219 Makefile.in (OFILES): Include it.
2220 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2221 Use new read_memory_func interface.
2223 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2225 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2226 * h8500-opc.h: Fix couple of opcodes.
2228 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2230 * Makefile.in: add dvi & installcheck targets
2232 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2234 * Makefile.in: Update for h8500-dis.c.
2236 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2238 * h8500-dis.c, h8500-opc.h: New files
2240 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2242 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2243 ../include/dis-asm.h.
2244 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2245 and ../gdb/m68k-pinsn.c).
2246 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2247 and ../gdb/i386-pinsn.c).
2248 * m68881-ext.c: New file. Moved definition of
2249 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2250 * Makefile.in: Adjust for new files.
2251 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2252 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2253 can be dis-assembled.
2255 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2257 * mips-dis.c (print_insn_arg): Now returns void.
2259 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2261 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2262 files that use the macros.
2264 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2266 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2267 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2268 (CFILES): Added mips-dis.c.
2270 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2272 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2273 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2275 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2277 * Makefile.in: Improve *clean rules.
2278 * configure.in: Allow a default host.
2280 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2282 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2283 files include other sysdep files
2285 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2287 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2289 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2291 * configure.in: For host support, use ../bfd/configure.host
2292 so it stays in sync with the ../bfd/hosts database.
2294 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2296 * configure.in: use cpu-vendor-os triple instead of nested cases
2298 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2300 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2301 *always* the wrong one.
2303 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2305 * z8kgen.c: added copyright info
2307 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2309 * z8k-dis.c (unparse_instr): prettier tabs
2310 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2312 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2314 * configure.in: Add ncr* configuration.
2315 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2316 picayune ANSI compilers happy.
2318 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2320 * configure.in (i386): Make i386 and i486 synonymous for now.
2321 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2323 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2325 * Makefile.in (install): Fix typo.
2327 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2329 * Makefile.in (make): Remove obsolete crud.
2330 (sparc-opc.o): Avoid Sun Make VPATH bug.
2332 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2334 * Makefile.in: since there are no SUBDIRS, remove rule and
2335 references of subdir_do.
2337 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2339 * Makefile.in (install): Get the library name right here too.
2340 Don't install bfd.h, since it's unrelated to this library. No
2341 subdirs to recurse into, either.
2342 (CFILES): The source file has a .c suffix, not .o.
2344 * sparc-opc.c: New file, moved from BFD.
2345 * Makefile.in (OFILES): Build it.
2347 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2349 * z8k-dis.c: fixed forward refferences of some declarations.
2351 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2353 * Makefile.in: get the name of the library right
2355 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2357 * z8k-dis.c: knows how to disassemble z8k stuff
2358 * z8k-opc.h: new file full of z8000 opcodes
2362 version-control: never
projects / deliverable / binutils-gdb.git / blob