1 2000-08-24 Kazu Hirata <kazu@hxi.com>
3 * z8k-dis.c: Fix formatting.
5 2000-08-16 Jim Wilson <wilson@cygnus.com>
7 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
8 break, mov-immediate, nop.
9 * ia64-opc-f.c: Delete fpsub instructions.
10 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
11 address operand. Rewrite using macros to avoid long lines.
12 * ia64-opc.h (POSTINC): Define.
13 * ia64-asmtab.c: Regenerate.
15 2000-08-15 Jim Wilson <wilson@cygnus.com>
17 * ia64-ic.tbl: Add missing entries.
19 2000-08-08 Jason Eckhardt <jle@cygnus.com>
21 * i860-dis.c (print_br_address): Change third argument from int
24 2000-08-07 Richard Henderson <rth@cygnus.com>
26 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
27 for MLI templates. Handle IA64_OPND_TGT64.
29 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
31 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
32 Change return type from void to int. Check the combination
33 of operands, return 1 if valid. Fix to avoid BUF overflow.
34 Report undefined combinations of operands in COMMENT.
35 Report internal errors to stderr. Output the adiw/sbiw
36 constant operand in both decimal and hex.
37 (print_insn_avr): Disassemble ldd/std with displacement of 0
38 as ld/st. Check avr_operand () return value, handle invalid
39 combinations of operands like unknown opcodes.
41 2000-08-04 Ben Elliston <bje@redhat.com>
43 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
46 2000-08-02 Jim Wilson <wilson@cygnus.com>
48 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
50 2000-07-28 Ben Elliston <bje@redhat.com>
52 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
53 (run-cgen, stamp-m32r, stamp-fr30): New targets.
54 * Makefile.in: Regenerate.
55 * configure.in: Add --enable-cgen-maint option.
56 * configure: Regenerate.
58 2000-07-26 Dave Brolley <brolley@redhat.com>
60 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
61 (cgen_hw_lookup_by_num): Ditto.
62 (cgen_operand_lookup_by_name): Ditto.
63 (print_address): Ditto.
64 (print_keyword): Ditto.
65 * cgen-dis.c (hash_insn_array): Mark unused parameters with
67 * cgen-asm.c (hash_insn_array): Mark unused parameters with
69 (cgen_parse_keyword): Ditto.
71 2000-07-22 Jason Eckhardt <jle@cygnus.com>
73 * i860-dis.c: New file.
74 (print_insn_i860): New function.
75 (print_br_address): New function.
76 (sign_extend): New function.
77 (BITWISE_OP): New macro.
78 (I860_REG_PREFIX): New macro.
79 (grnames, frnames, crnames): New structures.
81 * disassemble.c (ARCH_i860): Define.
82 (disassembler): Add check for bfd_arch_i860 to set disassemble
83 function to print_insn_i860.
85 * Makefile.in (CFILES): Added i860-dis.c.
86 (ALL_MACHINES): Added i860-dis.lo.
87 (i860-dis.lo): New dependences.
89 * configure.in: New bits for bfd_i860_arch.
91 * configure: Regenerated.
93 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
95 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
96 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
97 (cris-dis.lo, cris-opc.lo): New rules.
98 * Makefile.in: Rebuild.
99 * configure.in (bfd_cris_arch): New target.
100 * configure: Rebuild.
101 * disassemble.c (ARCH_cris): Define.
102 (disassembler): Support ARCH_cris.
103 * cris-dis.c, cris-opc.c: New files.
104 * po/POTFILES.in, po/opcodes.pot: Regenerate.
106 2000-07-11 Jakub Jelinek <jakub@redhat.com>
108 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
109 Reported by Bill Clarke <llib@computer.org>.
111 2000-07-09 Geoffrey Keating <geoffk@cygnus.com>
113 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
114 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
116 2000-07-09 Alan Modra <alan@linuxcare.com.au>
118 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
119 fput_const, extract_3, extract_5_load, extract_5_store,
120 extract_5r_store, extract_5R_store, extract_10U_store,
121 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
122 extract_12, extract_17, extract_22): Prototype.
123 (print_insn_hppa): Rename inner block opcode -> opc to avoid
124 shadowing outer block.
127 2000-07-05 DJ Delorie <dj@redhat.com>
131 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
133 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
135 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
137 * avr-dis.c (avr_operand): Change _ () to _() around all strings
138 marked for translation (exception from the usual coding style).
139 (print_insn_avr): Initialize insn2 to avoid warnings.
141 2000-07-03 Kazu Hirata <kazu@hxi.com>
143 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
144 * h8500-dis.c: Fix formatting.
146 2000-07-01 Alan Modra <alan@linuxcare.com.au>
148 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
149 (CLEANFILES): Add DEPA.
150 * Makefile.in: Regenerate.
152 2000-06-26 Scott Bambrough <scottb@netwinder.org>
154 * arm-dis.c (regnames): Add an additional register set to match
155 the set used by GCC. Make it the default.
157 2000-06-22 Alan Modra <alan@linuxcare.com.au>
159 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
161 * Makefile.in: Regenerate.
163 2000-06-20 H.J. Lu <hjl@gnu.org>
165 * Makefile.am: Rebuild dependency.
166 * Makefile.in: Rebuild.
168 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
170 * Makefile.in, configure: regenerate
171 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
173 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
175 * configure.in: Recognize m68hc12 and m68hc11.
176 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
177 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
178 and opcode generation for m68hc11 and m68hc12.
180 2000-06-16 Nick Duffek <nsd@redhat.com>
182 * disassemble.c (disassembler): Refer to the PowerPC 620 using
183 bfd_mach_ppc_620 instead of 620.
185 2000-06-12 Kazu Hirata <kazu@hxi.com>
187 * h8300-dis.c: Fix formatting.
188 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
191 Fri Jun 9 21:49:02 2000 Denis Chertykov <denisc@overta.ru>
193 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
195 Wed Jun 7 21:36:45 2000 Denis Chertykov <denisc@overta.ru>
197 * avr-dis.c: completely rewritten.
199 2000-06-02 Kazu Hirata <kazu@hxi.com>
201 * h8300-dis.c: Follow the GNU coding style.
202 (bfd_h8_disassemble) Fix a typo.
204 2000-06-01 Kazu Hirata <kazu@hxi.com>
206 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
207 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
208 correctly. Fix a typo.
210 2000-05-31 Nick Clifton <nickc@cygnus.com>
212 * opintl.h (_(String)): Explain why dgettext is used instead of
215 2000-05-30 Nick Clifton <nickc@cygnus.com>
217 * opintl.h (gettext, dgettext, dcgettext, textdomain,
218 bindtextdomain): Replace defines with those from intl/libgettext.h
219 to quieten gcc warnings.
221 2000-05-26 Alan Modra <alan@linuxcare.com.au>
223 * Makefile.am: Update dependencies with "make dep-am"
224 * Makefile.in: Regenerate.
226 Thu May 25 22:53:20 2000 Alexandre Oliva <aoliva@cygnus.com>
228 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
229 sign-extending operands.
231 Mon May 15 15:18:07 2000 Donald Lindsay <dlindsay@cygnus.com>
233 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
236 2000-05-21 Nick Clifton <nickc@cygnus.com>
238 * Makefile.am (LIBIBERTY): Define.
240 Fri May 19 12:29:27 EDT 2000 Diego Novillo <dnovillo@redhat.com>
242 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
243 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
244 (reg_names): Rename to std_reg_names. Change it to a char **
246 (std_reg_names): New name for reg_names.
247 (set_mips_isa_type): Set reg_names to point to std_reg_names by
250 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
252 * fr30-desc.h: Partially regenerated to account for changed
253 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
254 * m32r-desc.h: Ditto.
256 2000-05-15 Nick Clifton <nickc@cygnus.com>
258 * arm-opc.h: Use upper case for flasg in MSR and MRS
259 instructions. Allow any bit to be set in the field_mask of
262 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
263 field_mask of an MSR instruction.
265 2000-05-11 Thomas de Lellis <tdel@windriver.com>
267 * arm-opc.c: Disassembly of thumb ldsb/ldsh
268 instructions changed to ldrsb/ldrsh.
270 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
272 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
273 target addresses for 'jal' and 'j'.
275 2000-05-10 Geoff Keating <geoffk@cygnus.com>
277 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
278 also available in common mode when powerpc syntax is being used.
280 2000-05-08 Alan Modra <alan@linuxcare.com.au>
282 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
283 (dummy_print_address): Ditto.
285 2000-05-04 Timothy Wall <twall@cygnus.com>
289 * disassemble.c (disassembler): Add ARCH_tic54x.
290 * configure.in: Added tic54x target.
292 * Makefile.am: Add tic54x dependencies.
293 * Makefile.in: Ditto.
295 2000-05-03 J.T. Conklin <jtc@redback.com>
297 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
298 vector unit operands.
299 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
300 unit instruction formats.
301 (PPCVEC): New macro, mask for vector instructions.
302 (powerpc_operands): Add table entries for above operand types.
303 (powerpc_opcodes): Add table entries for vector instructions.
305 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
306 (print_insn_little_powerpc): Likewise.
307 (print_insn_powerpc): Prepend 'v' when printing vector registers.
309 Sun Apr 23 17:54:14 2000 Denis Chertykov <denisc@overta.ru>
311 * avr-dis.c (reg_fmul_d): New. Extract destination register from
313 (reg_fmul_r): New. Extract source register from FMUL instruction.
314 (reg_muls_d): New. Extract destination register from MULS instruction.
315 (reg_muls_r): New. Extract source register from MULS instruction.
316 (reg_movw_d): New. Extract destination register from MOVW instruction.
317 (reg_movw_r): New. Extract source register from MOVW instruction.
318 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
319 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
321 Mon Apr 24 15:21:35 2000 Clinton Popetz <cpopetz@cygnus.com>
323 * configure.in: Add bfd_powerpc_64_arch.
324 * disassemble.c (disassembler): Use print_insn_big_powerpc for
327 2000-04-24 Nick Clifton <nickc@cygnus.com>
329 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
332 2000-04-22 Timothy Wall <twall@cygnus.com>
334 * ia64-gen.c (general): Add an ordered table of primary
335 opcode names, as well as priority fields to disassembly data
336 structures to enforce a preferred disassembly format based on the
337 ordering of the opcode tables.
338 (load_insn_classes): Show a useful message if IC tables are missing.
339 (load_depfile): Ditto.
340 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
341 distinguish preferred disassembly.
342 * ia64-opc-f.c: Reorder some insn for preferred disassembly
343 format. Fix incorrect flag on fma.s/fma.s.s0.
344 * ia64-opc.c: Scan *all* disassembly matches and use the one with
345 the highest priority.
346 * ia64-opc-b.c: Use more abbreviations.
347 * ia64-asmtab.c: Regenerate.
349 Fri Apr 21 16:03:39 2000 Jason Eckhardt <jle@cygnus.com>
351 * hppa-dis.c (extract_16): New function.
352 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
353 new operand types l,y,&,fe,fE,fx.
355 Fri Apr 21 13:20:53 2000 Richard Henderson <rth@cygnus.com>
356 David Mosberger <davidm@hpl.hp.com>
357 Timothy Wall <twall@cygnus.com>
358 Bob Manson <manson@charmed.cygnus.com>
359 Jim Wilson <wilson@cygnus.com>
361 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
362 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
363 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
365 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
366 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
367 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
368 * Makefile.in: Rebuild.
370 * configure.in (bfd_ia64_arch): New target.
371 * disassemble.c (ARCH_ia64): Define.
372 (disassembler): Support ARCH_ia64.
373 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
374 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
375 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
376 ia64-war.tbl, ia64-waw.tbl): New files.
378 2000-04-20 Alexandre Oliva <aoliva@cygnus.com>
380 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
381 (disassemble): Use them.
383 2000-04-14 Alan Modra <alan@linuxcare.com.au>
385 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
386 * Makefile.am: Update dependencies.
387 * Makefile.in: Regenerate.
389 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
391 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
392 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
393 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
394 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
395 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
396 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
397 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
398 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
399 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
400 ansidecl.h as sysdep.h includes it.
402 Fri Apr 7 15:56:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
404 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
405 --enable-build-warnings option.
406 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
407 * Makefile.in, configure: Re-generate.
409 Wed Apr 5 22:28:18 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
411 * sh-opc.c (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
412 stc GBR,@-<REG_N> is available for arch_sh1_up.
413 Group parallel processing insn with identical mnemonics together.
414 Make three-operand psha / pshl come first.
416 Wed Apr 5 22:05:40 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
418 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
419 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
420 (sh_arg_type): Add A_PC.
421 (sh_table): Update entries using immediates. Add repeat.
422 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
423 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
425 2000-04-04 Alan Modra <alan@linuxcare.com.au>
427 * po/opcodes.pot: Regenerate.
429 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
430 (DEP): Quote when passing vars to sub-make. Add warning message
432 (DEP1): Rewrite for "gcc -MM".
433 (CLEANFILES): Add DEP2.
435 * Makefile.in: Regenerate.
437 2000-04-03 Denis Chertykov <denisc@overta.ru>
439 * avr-dis.c: Syntax cleanup.
440 (add0fff): Print the pc relative address as a signed number.
443 2000-04-01 Ian Lance Taylor <ian@zembu.com>
445 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
446 the parameter ATTRIBUTE_UNUSED.
447 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
449 2000-04-01 Alexandre Oliva <aoliva@cygnus.com>
451 * m10300-opc.c: SP-based offsets are always unsigned.
453 2000-03-29 Thomas de Lellis <tdel@windriver.com>
455 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
456 [branch always] instead of "undefined".
458 2000-03-27 Nick Clifton <nickc@cygnus.com>
460 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
461 short instructions, from end of list of long instructions.
463 2000-03-27 Ian Lance Taylor <ian@zembu.com>
465 * Makefile.am (CFILES): Add avr-dis.c.
466 (ALL_MACHINES): Add avr-dis.lo.
468 2000-03-27 Alan Modra <alan@linuxcare.com>
470 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
472 (print_insn_avr): Call function via pointer in K&R compatible way.
473 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
474 add0fff, add03f8): Convert to old style function declaration and
476 (avrdis_opcode): Add prototype.
478 2000-03-27 Denis Chertykov <denisc@overta.ru>
480 * avr-dis.c: New file. AVR disassembler.
481 * configure.in (bfd_avr_arch): New architecture support.
482 * disassemble.c: Likewise.
483 * configure: Regenerate.
485 Mon Mar 6 19:52:05 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
487 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
489 2000-03-02 J"orn Rennecke <amylaar@cygnus.co.uk>
491 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
492 flag to determine if operand is pc-relative.
495 (REL6S3): Renamed from IMM6S3.
496 Added flag OPERAND_PCREL.
497 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
498 added flag OPERAND_PCREL.
499 (IMM12S3U): Replaced with REL12S3.
500 (SHORT_D2, LONG_D): Delay target is pc-relative.
501 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
502 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
503 using the REL* operands.
504 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
505 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
506 LONG_Db, using REL* operands.
507 (SHORT_U, SHORT_A5S): Removed stray alternatives.
508 (d30v_opcode_table): Use new *r formats.
510 2000-02-28 Nick Clifton <nickc@cygnus.com>
512 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
513 'signed_overflow_ok_p'.
515 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
517 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
518 name of the libtool directory.
519 * Makefile.in: Rebuild.
521 2000-02-24 Nick Clifton <nickc@cygnus.com>
523 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
524 (cgen_clear_signed_overflow_ok): New function.
525 (cgen_signed_overflow_ok_p): New function.
527 2000-02-23 Andrew Haley <aph@cygnus.com>
529 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
530 m32r-ibld.c,m32r-opc.h: Rebuild.
532 2000-02-23 Linas Vepstas <linas@linas.org>
534 * i370-dis.c, i370-opc.c: New.
536 * disassemble.c (ARCH_i370): Define.
537 (disassembler): Handle it.
539 * Makefile.am: Add support for Linux/IBM 370.
540 * configure.in: Likewise.
542 * Makefile.in: Regenerate.
543 * configure: Likewise.
545 2000-02-22 Chandra Chavva <cchavva@cygnus.com>
547 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
548 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
551 1999-12-30 Andrew Haley <aph@cygnus.com>
553 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
555 * mips-opc.c (G6): New define.
556 (mips_builtin_op): Add "move" definition for -gp32.
558 2000-02-22 Ian Lance Taylor <ian@zembu.com>
560 From Grant Erickson <gerickso@Brocade.COM>:
561 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
563 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
565 * dis-buf.c (buffer_read_memory): Change `length' param and all int
568 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
570 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
571 (print_insn_ppi): Likewise.
572 (print_insn_shx): Use info->mach to select appropriate insn set.
573 Add support for sh-dsp. Remove FD_REG_N support.
574 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
575 (sh_arg_type): Likewise. Remove FD_REG_N.
576 (sh_dsp_reg_nums): New enum.
577 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
578 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
579 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
580 (arch_sh3_dsp_up): Likewise.
581 (sh_opcode_info): New field: arch.
582 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
583 D_REG_N. Fill in arch field. Add sh-dsp insns.
585 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
587 * arm-dis.c: Change flavor name from atpcs-special to
588 special-atpcs to prevent name conflict in gdb.
589 (get_arm_regname_num_options, set_arm_regname_option,
590 get_arm_regnames): New functions. API to access the several
591 flavor of register names. Note: Used by gdb.
592 (print_insn_thumb): Use the register name entry from the currently
593 selected flavor for LR and PC.
595 2000-02-10 Nick Clifton <nickc@cygnus.com>
597 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
599 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
600 "mulsh.h" instructions.
601 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
603 (print_insn_mcore): Add support for little endian targets.
604 Add support for MULSH and OPSR classes.
606 2000-02-07 Nick Clifton <nickc@cygnus.com>
608 * arm-dis.c (parse_arm_diassembler_option): Rename again.
609 Previous delat did not take.
611 2000-02-03 Timothy Wall <twall@redhat.com>
613 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
614 to adjust target address bounds checking and calculate the
615 appropriate octet offset into data.
617 2000-01-27 Nick Clifton <nickc@redhat.com>
619 * arm-dis.c: (parse_disassembler_option): Rename to
620 parse_arm_disassembler_option and allow to be exported.
622 * disassemble.c (disassembler_usage): New function: Print out any
623 target specific disassembler options.
624 Call arm_disassembler_options() if the ARM architecture is being
627 * arm-dis.c (NUM_ELEM): Define this macro if not already
629 (arm_regname): New struct type for ARM register names.
630 (arm_toggle_regnames): Delete.
631 (parse_disassembler_option): Use register name structure.
632 (print_insn): New function: Combines duplicate code found in
633 print_insn_big_arm and print_insn_little_arm.
634 (print_insn_big_arm): Call print_insn.
635 (print_insn_little_arm): Call print_insn.
636 (print_arm_disassembler_options): Display list of supported,
637 ARM specific disassembler options.
639 2000-01-27 Thomas de Lellis <tdel@windriver.com>
641 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
642 ARM_STT_16BIT flag as Thumb code symbols.
644 * arm-dis.c (printf_insn_little_arm): Ditto.
646 2000-01-25 Thomas de Lellis <tdel@windriver.com>
648 * arm-dis.c (printf_insn_thumb): Prevent double dumping
649 of raw thumb instructions.
651 2000-01-20 Nick Clifton <nickc@cygnus.com>
653 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
655 2000-01-03 Nick Clifton <nickc@cygnus.com>
657 * arm-dis.c (streq): New macro.
659 (force_thumb): ew local variable.
660 (parse_disassembler_option): New function: Parse a single, ARM
661 specific disassembler command line switch.
662 (parse_disassembler_option): Call parse_disassembler_option to
663 parse individual command line switches.
664 (print_insn_big_arm): Check force_thumb.
665 (print_insn_little_arm): Check force_thumb.
667 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
669 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
671 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
673 * m10300-opc.c, m10300-dis.c: Add am33 support.
675 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
677 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
678 (print_insn_hppa): Handle 'B' operand.
680 1999-11-22 Nick Clifton <nickc@cygnus.com>
682 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
684 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
686 * mips-opc.c (I5): New.
687 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
688 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
689 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
691 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
693 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
694 * arm-opc.h (print_insn_arm): Added comment documenting
695 the 'X' format just added to arm-dis.c.
697 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
699 * mips-opc.c (la): Create a version that just uses addiu directly.
700 (dla): Expand to daddiu if possible.
702 1999-11-11 Nick Clifton <nickc@cygnus.com>
704 * mips-opc.c: Add ssnop pattern.
706 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
708 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
710 1999-10-29 Nick Clifton <nickc@cygnus.com>
712 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
713 (d30v_format_tab): Define the SHORT_AR format.
715 1999-10-28 Nick Clifton <nickc@cygnus.com>
717 * mcore-dis.c: Remove spurious code introduced in previous delta.
719 1999-10-27 Scott Bambrough <scottb@netwinder.org>
721 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
723 1999-10-18 Michael Meissner <meissner@cygnus.com>
725 * alpha-opc.c (alpha_operands): Fill in missing initializer.
726 (alpha_num_operands): Convert to unsigned.
727 (alpha_num_opcodes): Ditto.
728 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
733 (extract_bdisp): Ditto.
734 (extract_jhint): Ditto.
735 (extract_ev6hwjhint): Ditto.
737 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
739 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
742 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
744 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
746 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
748 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
749 rac/rachi instructions.
750 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
753 1999-10-04 Doug Evans <devans@casey.cygnus.com>
755 * fr30-asm.c,fr30-desc.h: Rebuild.
756 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
757 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
759 1999-09-29 Nick Clifton <nickc@cygnus.com>
761 * sh-opc.h: Fix bit patterns for several load and store
764 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
766 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
767 cleaner code using completer prefixes. Add 'Y'.
769 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
771 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
773 * hppa-dis.c (extract_22): New function.
775 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
777 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
779 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
781 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
783 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
785 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
787 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
789 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
791 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
793 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
795 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
797 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
800 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
802 * hppa-dis.c: (print_insn_hppa): Add missing break after
805 * hppa-dis.c: Finish constifying various completers, register
808 1999-09-14 Michael Meissner <meissner@cygnus.com>
810 * configure.in (Canonicalization of target names): Remove adding
811 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
812 generates $ac_config_sub with a ${CONFIG_SHELL} already.
813 * configure: Regenerate.
815 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
817 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
819 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
821 1999-09-07 Nick Clifton <nickc@cygnus.com>
823 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
824 names for the mulu and muls patterns.
826 1999-09-04 Steve Chamberlain <sac@pobox.com>
828 * pj-opc.c: New file.
829 * pj-dis.c: New file.
830 * disassemble.c (disassembler): Handle bfd_arch_pj.
831 * configure.in: Handle bfd_pj_arch.
832 * Makefile.am: Rebuild dependencies.
833 (CFILES): Add pj-dis.c and pj-opc.c.
834 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
835 * configure, Makefile.in: Rebuild.
837 1999-09-04 H.J. Lu <hjl@gnu.org>
839 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
841 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
843 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
845 1999-08-04 Doug Evans <devans@casey.cygnus.com>
847 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
848 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
849 * m32r-opinst.c: Rebuild.
851 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
853 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
854 register args by 'f'.
856 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
858 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
859 extract_10U_store): New.
860 (print_insn_hppa): Add new completers.
862 * hppa-dis.c (signed_unsigned_names,mix_half_names,
863 saturation_names): New.
864 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
866 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
868 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
870 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
871 to decide to print a space.
873 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
875 * i386-dis.c: Add AMD athlon instruction support.
877 1999-08-10 Ian Lance Taylor <ian@zembu.com>
879 From Wally Iimura <iimura@microunity.com>:
880 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
881 overflow at end of address space.
882 (generic_print_address): Use sprintf_vma.
884 1999-08-08 Ian Lance Taylor <ian@zembu.com>
886 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
887 MKDEP. Rebuild dependencies.
888 * Makefile.in: Rebuild.
890 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
892 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
893 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
894 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
895 (print_insn_hppa): Add 64 bit condition completers.
897 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
899 * hppa-dis.c (print_insn_hppa): Change condition args to use
902 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
904 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
907 1999-07-21 Ian Lance Taylor <ian@zembu.com>
910 * configure.bat: Remove; obsolete.
912 1999-07-11 Ian Lance Taylor <ian@zembu.com>
914 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
915 (generic_strcat_address): Add cast to avoid warning.
916 * i386-dis.c: Initialize all structure fields to avoid warnings.
917 Add ATTRIBUTE_UNUSED as appropriate.
919 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
921 * sparc-dis.c (print_insn_sparc): Differentiate between
922 addition and oring when guessing symbol for comment.
924 1999-07-05 Nick Clifton <nickc@cygnus.com>
926 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
929 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
931 * i386-dis.c: Mention intel mode specials in macro char comment.
933 1999-06-21 Ian Lance Taylor <ian@zembu.com>
935 * alpha-dis.c: Don't include <stdlib.h>.
936 * arm-dis.c: Include "sysdep.h".
937 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
939 * Makefile.am: Rebuild dependencies.
940 * Makefile.in: Rebuild.
942 1999-06-16 Nick Clifton <nickc@cygnus.com>
944 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
947 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
949 * arm-dis.c (arm_regnames): Turn into a pointer to a register
951 (arm_regnames_standard): New variable: Array of ARM register
952 names according to ARM instruction set nomenclature.
953 (arm_regnames_apcs): New variable: Array of ARM register names
954 according to ARM Procedure Call Standard.
955 (arm_regnames_raw): New variable: Array of ARM register names
956 using just 'r' and the register number.
957 (arm_toggle_regnames): New function: Toggle the chosen register set
959 (parse_disassembler_options): New function: Parse any target
960 disassembler command line options.
961 (print_insn_big_arm): Call parse_disassembler_options if any
963 (print_insn_little_arm): Call parse_disassembler_options if any
966 1999-06-13 Ian Lance Taylor <ian@zembu.com>
968 * i386-dis.c (FWAIT_OPCODE): Define.
969 (used_prefixes): New static variable.
970 (fetch_data): Don't print an error message if we have already
971 fetched some bytes successfully.
972 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
973 (prefix_name): New static function.
974 (print_insn_i386): If setjmp fails, indicating a data error, but
975 we have managed to fetch some bytes, print the first one as a
976 prefix or a .byte pseudo-op. If fwait is followed by a non
977 floating point instruction, print the first prefix. Set
978 used_prefixes when prefixes are used. If any prefixes were not
979 used after disassembling the instruction, print the first prefix
980 instead of printing the instruction.
981 (putop): Set used_prefixes when prefixes are used.
982 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
983 (OP_DIR, OP_SIMD_Suffix): Likewise.
985 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
987 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
988 Support signx %reg, clruw %reg.
990 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
992 * sparc-opc.c: Add aliases Solaris as supports.
994 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
996 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
997 * Makefile.in: Regenerated.
999 1999-06-03 Philip Blundell <philb@gnu.org>
1001 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
1002 when target is PC-relative.
1004 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
1006 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
1009 * m68k-dis.c (fetch_arg): Add places `n', `o'.
1011 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
1012 Add mcf5206e to appropriate instructions.
1013 Add alias for MAC, MSAC.
1015 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
1018 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
1019 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
1021 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
1023 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
1025 * i386-dis.c (Ed): Define.
1026 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
1028 (OP_rm): Rename to OP_Rd.
1031 (putop): Add const to template and p.
1032 (print_insn_x86): Delete.
1033 (print_insn_i386): Merge old function print_insn_x86. Add const
1035 (struct dis386): Add const to name.
1036 (dis386_att, dis386_intel): Add const.
1037 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
1038 (names32, names16, names8, names_seg, index16): Add const.
1039 (grps, prefix_user_table, float_reg): Add const.
1040 (float_mem_att, float_mem_intel): Add const.
1041 (oappend): Add const to s.
1042 (OP_REG): Add const to s.
1043 (ptr_reg): Add const to s.
1044 (dofloat): Add const to dp.
1045 (OP_C): Don't skip modrm, it's now done in OP_Rd.
1048 (OP_Rd): Check for valid mod. Call Op_E to print.
1049 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
1050 (OP_MS): Check for valid mod. Call Op_EM to print.
1051 (OP_3DNowSuffix): Set obufp and use oappend rather than
1052 strcat. Call BadOp() for errors.
1053 (OP_SIMD_Suffix): Likewise.
1054 (BadOp): New function.
1056 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
1058 * i386-dis.c (dis386_intel): Remove macro chars, except for
1059 jEcxz. Change cWtR and cRtd to cW and cR.
1060 (dis386_twobyte_intel): Remove macro chars here too.
1061 (putop): Handle R and W macros for intel mode.
1063 * i386-dis.c (SIMD_Fixup): New function.
1064 (dis386_twobyte_att): Use it on movlps and movhps, and change
1065 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
1066 (dis386_twobyte_intel): Same here.
1068 * i386-dis.c (Av): Remove.
1072 (OP_SIMD_Suffix): New function.
1073 (OP_DIR): Remove dead code.
1074 (eAX_reg..eDI_reg): Renumber.
1075 (onebyte_has_modrm): Table numbering comments.
1076 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
1077 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
1078 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
1079 and handle SIMD cmp insns in OP_SIMD_Suffix.
1080 (info->bytes_per_line): Bump from 5 to 6.
1082 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
1083 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
1085 PIII SIMD support from Doug Ledford <dledford@redhat.com>
1086 * i386-dis.c (XM, EX, None): Define.
1087 (OP_XMM, OP_EX, OP_None): New functions.
1088 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
1089 (GRP14): Rename to GRPAMD.
1090 (GRP*): Add USE_GROUPS flag.
1092 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
1093 (twobyte_has_modrm): Add SIMD entries.
1094 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
1095 (grps): Add SIMD insns.
1096 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
1097 oappend repz if uses_f3_prefix. Add code to handle new groups for
1100 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1101 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
1102 operand from Av to Jv.
1104 1999-05-07 Nick Clifton <nickc@cygnus.com>
1106 * mcore-dis.c (print_insn_mcore): Use .short to display
1107 unidentified instructions, not .word.
1109 1999-04-26 Tom Tromey <tromey@cygnus.com>
1111 * aclocal.m4, configure: Updated for new version of libtool.
1113 1999-04-14 Doug Evans <devans@casey.cygnus.com>
1115 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
1116 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
1118 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
1120 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
1123 1999-04-10 Doug Evans <devans@casey.cygnus.com>
1125 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
1126 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
1128 1999-04-06 Ian Lance Taylor <ian@zembu.com>
1130 * opintl.h (LC_MESSAGES): Never define.
1132 1999-04-04 Ian Lance Taylor <ian@zembu.com>
1134 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
1135 (separator_char, scale_char): Likewise.
1136 (print_insn_x86): Likewise.
1137 (print_insn_i386): Likewise. Add declaration.
1139 1999-03-26 Doug Evans <devans@casey.cygnus.com>
1141 * fr30-dis.c: Rebuild.
1142 * m32r-dis.c: Rebuild.
1144 1999-03-23 Ian Lance Taylor <ian@zembu.com>
1146 * m68k-opc.c: Change compare instructions to use "@s" rather than
1147 ";s" when used with an immediate operand.
1149 1999-03-22 Doug Evans <devans@casey.cygnus.com>
1151 * cgen-opc.c (cgen_set_cpu): Delete.
1152 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
1153 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
1155 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
1157 * po/opcodes.pot: Rebuild.
1159 1999-03-16 Martin Hunt <hunt@cygnus.com>
1161 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
1163 1999-03-11 Doug Evans <devans@casey.cygnus.com>
1165 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
1166 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
1167 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
1168 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
1169 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
1170 * m32r-opinst.c: Rebuild.
1172 1999-02-25 Doug Evans <devans@casey.cygnus.com>
1174 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
1175 (cgen_hw_lookup_by_num): Rewrite.
1176 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
1177 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
1178 * m32r-opinst.c: Rebuild.
1180 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
1182 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
1183 (insert_jhint): Fix insertion mask.
1184 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
1186 1999-02-10 Doug Evans <devans@casey.cygnus.com>
1188 * Makefile.in: Rebuild.
1190 1999-02-09 Doug Evans <devans@casey.cygnus.com>
1192 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
1193 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
1194 * Makefile.am: Remove references to them.
1195 (HFILES): Add fr30-desc.h,m32r-desc.h.
1196 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
1198 (ALL_MACHINES): Update.
1199 * configure.in: Redo handling of cgen_files.
1200 (bfd_i960_arch): Delete i960c-*.lo files.
1201 * configure: Regenerate.
1202 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
1203 (hash_insn_array): Rewrite.
1204 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
1205 (hash_insn_array): Rewrite.
1206 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
1207 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
1208 (cgen_lookup_get_insn_operands): Ditto.
1209 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
1210 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1211 * po/POTFILES.in: Rebuild.
1212 * po/opcodes.pot: Rebuild.
1214 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
1216 * Makefile.am: Rebuild dependencies.
1217 (HFILES): Add fr30-opc.h.
1218 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
1219 * Makefile.in: Rebuild.
1221 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
1222 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
1224 * acconfig.h: Remove.
1225 * configure: Rebuild with current autoconf/automake.
1226 * aclocal.m4: Likewise.
1227 * config.in: Likewise.
1228 * Makefile.in: Likewise.
1230 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
1232 * m68k-opc.c: Correct move (not movew) to status word on 5200.
1234 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
1236 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
1237 * i386-dis.c (x_mode): Define.
1240 (dis386_intel): New.
1241 (dis386_twobyte): Remove.
1242 (dis386_twobyte_att): New.
1243 (dis386_twobyte_intel): New.
1244 (print_insn_x86): Use new arrays.
1245 (float_mem): Remove.
1246 (float_mem_intel): New.
1247 (float_mem_att): New.
1248 (dofloat): Use new float_mem arrays.
1249 (print_insn_i386_att): New.
1250 (print_insn_i386_intel): New.
1251 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
1252 (putop): Handle intel syntax.
1253 (OP_indirE): Handle intel syntax.
1254 (OP_E): Handle intel syntax.
1255 (OP_I): Handle intel syntax.
1256 (OP_sI): Handle intel syntax.
1257 (OP_OFF): Handle intel syntax.
1259 1999-01-27 Doug Evans <devans@casey.cygnus.com>
1261 * fr30-opc.h,fr30-opc.c: Rebuild.
1262 * i960c-opc.h,i960c-opc.c: Rebuild.
1263 * m32r-opc.c: Rebuild.
1265 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
1267 * hppa-dis.c: revert HP merge changes until HP gives us
1270 1999-01-19 Nick Clifton <nickc@cygnus.com>
1272 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
1273 offsets as well as symbloic address.
1275 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
1277 * hppa-dis.c: fix comments and some indentation.
1279 1999-01-12 Doug Evans <devans@casey.cygnus.com>
1281 * fr30-opc.c,i960c-opc.c: Regenerate.
1283 1999-01-11 Doug Evans <devans@casey.cygnus.com>
1285 * fr30-opc.c: Regenerate.
1287 1999-01-06 Doug Evans <devans@casey.cygnus.com>
1289 * m32r-dis.c: Regenerate.
1291 1999-01-05 Doug Evans <devans@casey.cygnus.com>
1293 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
1294 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
1295 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1297 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1299 * configure.in: Require autoconf 2.12.1 or higher.
1301 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
1303 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
1305 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
1307 * fr30-opc.c: Regenerated.
1309 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
1311 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
1313 1998-12-15 Dave Brolley <brolley@cygnus.com>
1315 * fr30-opc.c,fr30-opc.h: Regenerated.
1317 1998-12-14 Dave Brolley <brolley@cygnus.com>
1319 * fr30-opc.c,fr30-opc.h: Regenerated.
1321 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
1323 * fr30-opc.c,fr30-opc.h: Regenerated.
1325 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
1327 * m32r-opc.c: Regenerate.
1329 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
1331 * dis-buf.c (generic_strcat_address): reformat to GNU coding
1332 conventions. change sprintf call to an sprintf_vma call.
1334 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
1336 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1338 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
1340 The following changes were made by
1341 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
1342 David Taylor <taylor@texas.cygnus.com>, and
1343 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
1344 merge in changes by HP; HP did not create ChangeLog entries.
1346 * dis-buf.c (generic_strcat_address): new function.
1348 * hppa-dis.c: Changes to improve hppa disassembly.
1349 Changed formatting in : reg_names, fp_reg_names,control_reg,
1350 New variables : sign_extension_names, deposit_names, conversion_names
1351 float_test_names, compare_cond_names_double, add_cond_names_double,
1352 logical_cond_names_double, unit_cond_names_double,
1353 branch_push_pop_names, saturation_names, shift_names, mix_names,
1354 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
1355 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
1356 (fput_const): renamed as fput_hex_const
1358 - use the macros fputs_filtered and
1359 fput_decimal_const whenever possible; calls to sign_extend require
1360 2 params -- add a missing second param of 0.
1361 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
1362 architecture version number of current machine. HP folks are
1363 trying to handle situation where the target program was compiled
1364 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
1366 - added new cases : 'g', 'B', 'm'
1367 - added cases specifically for PA 2.0
1368 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
1369 - calls to fput_const become calls to fput_hex_const
1371 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
1373 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
1374 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
1375 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
1376 * Makefile.in: Rebuilt.
1377 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
1379 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
1380 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
1382 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
1384 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1386 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
1388 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
1390 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
1391 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
1393 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
1395 * fr30-opc.c: Regenerate.
1397 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
1399 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1401 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
1403 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1405 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
1407 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
1409 1998-11-30 Doug Evans <devans@casey.cygnus.com>
1411 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
1412 CGEN_INSN_BASE_VALUE.
1413 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1414 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
1416 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
1418 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
1420 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
1422 * fr30-asm.c,fr30-dis.c: Regenerated.
1424 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
1426 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1428 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
1430 * fr30-opc.c: Regenerated.
1432 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
1434 * fr30-opc.c: Regenerated.
1435 * fr30-opc.h: Regenerated.
1436 * fr30-dis.c: Regenerated.
1437 * fr30-asm.c: Regenerated.
1439 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
1441 * mips-opc.c (sync.p,sync.l): Swap insn values.
1443 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
1445 * fr30-opc.c: Regenerate.
1447 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
1449 * fr30-opc.c: Regenerated.
1450 * fr30-opc.h: Regenerated.
1452 1998-11-18 Doug Evans <devans@casey.cygnus.com>
1454 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
1455 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
1457 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
1459 * fr30-opc.c: Regenerated.
1461 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
1463 * fr30-opc.c: Regenerated.
1464 * fr30-opc.h: Regenerated.
1465 * fr30-dis.c: Regenerated.
1466 * fr30-asm.c: Regenerated.
1468 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
1470 * po/opcodes.pot: Regenerated.
1471 * fr30-opc.c: Regenerated.
1472 * fr30-opc.h: Regenerated.
1473 * fr30-dis.c: Regenerated.
1474 * fr30-asm.c: Regenerated.
1476 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
1478 * disassemble.c (disassembler): Add support for FR30 target.
1480 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
1482 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
1483 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
1485 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
1487 * po/opcodes.pot: Regenerate.
1488 * po/POTFILES.in: Regenerate.
1489 * fr30-opc.c: Regenerate.
1490 * fr30-opc.h: Regenerate.
1492 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
1494 * m32r-asm.c: Regenerate.
1496 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
1498 * configure.in: Added case for bfd_fr30_arch.
1499 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
1500 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
1501 (CLEANFILES): Added stamp-fr30.
1503 * fr30-asm.c: New file.
1504 * fr30-dis.c: New file.
1505 * fr30-opc.c: New file.
1506 * fr30-opc.h: New file.
1507 * po/POTFILES.in: Regenerated
1508 * po/opcodes.pot: Regenerated
1510 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
1512 * configure.in: detect cygwin* instead of cygwin32*
1513 * configure: regenerate
1515 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
1517 * mips-opc.c (IS_M): Added.
1519 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
1521 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1523 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
1525 * m32r-opc.h,m32r-opc.c: Regenerate.
1527 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1529 * i386-dis.c (OP_3DNowSuffix): New static function.
1532 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
1533 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
1534 (insn_codep): New static variable.
1535 (print_insn_x86): Init insn_codep after prefixes.
1536 (grps): Add GRP14 entries for prefetch, prefetchw.
1539 From Jeff B Epler <jepler@usgs.gov>
1540 * i386-dis.c (Suffix3DNow): New table.
1542 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
1544 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1546 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
1548 * d10v-dis.c (print_operand): If num is nonzero, then
1549 add OPERAND_ACC1, not OPERAND_ACC0.
1551 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
1553 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1556 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
1558 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1561 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1563 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1565 1998-09-09 Michael Meissner <meissner@cygnus.com>
1567 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1570 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1572 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1574 (print_insn_little_arm): Detect Thumb symbols in elf object
1577 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1579 * alpha-dis.c (print_insn_alpha): Use the machine type to
1580 decide which PALcode set to include.
1582 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1584 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1586 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1588 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1589 MSUB and MSUBS instructions.
1591 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1593 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1594 operand name macros.
1596 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1598 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1599 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1600 +, -, and d for ColdFire.
1602 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1603 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1604 (extract_mbe): Likewise.
1606 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1608 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1610 * m10300-opc.c: First cut at UDF instructions.
1612 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1614 * m32r-opc.c: Regenerate (remove semantic descriptions).
1616 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1618 * arm-dis.c (print_insn_big_arm): Fix indentation.
1619 (print_insn_little_arm): Likewise.
1621 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1623 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1625 (print_insn_little_arm): Likewise.
1627 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1629 Move all global state data into opcode table struct, and treat
1630 opcode table as something that is "opened/closed".
1631 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1632 (cgen_asm_init): Delete.
1633 (cgen_set_parse_operand_fn): New function.
1634 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1635 (cgen_dis_init): Delete.
1636 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1637 (cgen_current_{opcode_table_mach,endian}): Delete.
1638 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1640 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1642 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1645 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1647 * m10300-opc.c: Add entries for "no_match_operands" field in
1650 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1652 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1654 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1656 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1658 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1660 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1662 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1664 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1665 will be masked later.
1667 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1669 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1671 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1673 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1675 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1677 * m10300-dis.c: Only recognize instructions from the currently
1679 * m10300-opc.c: Add field indicating the particular variant of
1680 the mn10300 each instruction is available on.
1682 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1684 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1685 * Makefile.am: Rebuild dependencies.
1686 (CFILES): Add vax-dis.c.
1687 (ALL_MACHINES): Add vax-dis.lo.
1688 * aclocal.m4: Rebuild with current libtool.
1689 * configure, Makefile.in: Rebuild.
1691 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1693 * vax-dis.c: New file, from work by Pauline Middelink
1694 <middelin@polyware.iaf.nl>.
1695 * disassemble.c (ARCH_vax): Define if ARCH_all.
1696 (disassembler): Add case for ARCH_vax.
1697 * makefile.vms: Support compilation on vms/vax.
1699 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1701 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1702 related to sign extension and the size of ints.
1704 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1706 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1707 instructions. Support (sp) addressing mode by expanding it into
1710 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1712 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1714 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1716 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1718 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1720 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1723 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1725 * mips-dis.c (print_insn_little_mips): Previously, instruction
1726 printing references the symbol table to determine whether the
1727 instruction resides in a block regular instructions or mips16
1728 instructions. However, when the disassembler gets used in other
1729 environments where the symbol table is not present, we no longer
1730 rely in the symbol table, rather, use the low bit of the
1731 instructions address to guess. There should be no change for usage
1732 of the disassembler in host based programs, gdb, objdump.
1733 (print_insn_big_mips): ditto.
1734 (print_insn_mips): ditto
1736 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1738 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1740 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1742 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1744 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1746 * i386-dis.c (index16): Add '%' to register names. Use ','
1749 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1751 * i386-dis.c: Don't print opcode suffix when we can figure out the
1752 size (and gas can!) by register operands, or from the default
1754 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1756 (dis386, dis386_twobyte, grps): Use new suffix macros.
1757 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1758 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1759 order of cmps operands to agree with Intel docs. Correct operand
1760 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1761 agree with Intel docs.
1762 (print_insn_x86): Print orphan fwait before other prefixes.
1763 Return correct byte count for orphan fwait with prefixes. Don't
1764 print `bound' operands in reverse order.
1765 (ckprefix): Stop accumulating prefixes if we get fwait.
1766 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1768 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1770 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1771 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1773 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1775 Fix problems when bfd_vma is wider than long.
1776 * i386-dis.c: Make op_address and start_pc unsigned.
1777 (set_op): Make parameter unsigned.
1778 (print_insn_x86): Cast to bfd_vma when passing a value to
1780 * ns32k-dis.c (CORE_ADDR): Don't define.
1781 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1782 bfd_scan_vma to read back address.
1783 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1785 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1786 (NEXTULONG): New definition.
1787 (print_insn_m68k): Avoid overflow when computing third argument of
1789 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1790 Use disp instead of val to store offset values.
1791 (print_indexed): Use base_disp instead of word to store base
1792 displacement, to avoid overflow.
1793 * m10300-dis.c (disassemble): Cast value to long when computing
1794 pc-relative address, to get correct sign extension.
1796 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1798 * m32r-opc.c: Regenerate.
1800 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1802 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1803 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1805 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1807 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1809 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1811 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1813 (OP_DSreg): Rename from OP_DSSI.
1814 (OP_ESreg): Rename from OP_ESDI.
1815 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1817 (append_seg): Rename from append_prefix.
1818 (ptr_reg): New function.
1819 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1821 (PREFIX_ADDR): Rename from PREFIX_ADR.
1822 (float_reg): Add non-broken opcodes for people who don't want
1825 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1827 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1830 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1832 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1834 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1836 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1837 0; produce error message for shifts of size 32 (or 64 for 64-bit
1838 shifts), because the hardware doesn't support them.
1840 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1842 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1843 LONG_2, LONG_2b formats to use this new operand.
1845 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1847 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1849 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1851 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1852 endian data support.
1854 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1856 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1857 and SHORT_B3b formats to use Rb instead of Ra.
1859 Add FLAG_MUL16 to MUL2XH opcode.
1861 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1862 to existing 1.1.1 parallelisation prohibition procedure.
1864 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1866 * m32r-asm.c,m32r-dis.c: Regenerate.
1868 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1870 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1871 with a shift count of 0.
1873 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1875 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1876 (cgen_hw_lookup_by_num): New function.
1878 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1880 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1882 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1884 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1885 as big-endian on SPARClite.
1887 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1889 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1891 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1893 * po/Make-in (install-info): New target.
1895 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1897 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1898 * configure: Rebuild.
1900 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1902 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1903 variety of ISA2 instructions to set bottom ten bits of trap code.
1905 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1907 * Makefile.am (config.status): Add explicit target so that
1908 config.status depends upon bfd/configure.in.
1909 * Makefile.in: Rebuild.
1911 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1913 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1914 instructions to set bottom ten bits of break code.
1915 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1916 for above optional argument.
1918 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1920 * makefile.vms: Run dec c with /nodebug.
1922 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1924 * Makefile.in: Rebuilt.
1925 * Makefile.am: Regenerated dependencies with mkdep.
1927 * opintl.h (_): Define as dgettext.
1929 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1931 * cgen-asm.c: Internationalised.
1932 * m32r-asm.c: Internationalised.
1933 * m32r-dis.c: Internationalised.
1934 * m32r-opc.c: Internationalised.
1936 * aclocal.m4: Regenerated.
1937 * configure: Regenerated.
1938 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1939 * Makefile.in: Rebuild.
1940 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1941 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1943 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1945 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1947 * aclocal.m4, configure: Rebuild with current tools.
1949 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1951 * opintl.h: New file - contains internationalisation macros used
1952 by source files in this directory.
1953 * po/: New subdirectory - contains internationalisation files.
1954 * po/Make-in: New file - Makefile constructor.
1955 * po/POTFILES.in: New file - list of files in opcodes directory
1956 that should be scan for internationalisation macros.
1957 * po/opcodes.pot: New file - list of internationisation strings
1958 found in files mentioned in po/POTFILES.in.
1959 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1960 entry. Add intl directory to include paths.
1961 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1962 HAVE_STRCPY, HAVE_LC_MESSAGES
1963 * configure.in: Add rule to build Makefile in po subdirectory.
1964 * Makefile.in: Rebuilt.
1965 * aclocal.m4: Rebuilt.
1966 * config.in: Rebuilt.
1967 * configure: Rebuilt.
1968 * alpha-opc.c: Internationalised.
1969 * arc-dis.c: Internationalised.
1970 * arc-opc.c: Internationalised.
1971 * arm-dis.c: Internationalised.
1972 * cgen-asm.c: Internationalised.
1973 * d30v-dis.c: Internationalised.
1974 * dis-buf.c: Internationalised.
1975 * h8300-dis.c: Internationalised.
1976 * h8500-dis.c: Internationalised.
1977 * i386-dis.c: Internationalised.
1978 * m10200-dis.c: Internationalised.
1979 * m10300-dis.c: Internationalised.
1980 * m68k-dis.c: Internationalised.
1981 * m88k-dis.c: Internationalised.
1982 * mips-dis.c: Internationalised.
1983 * ns32k-dis.c: Internationalised.
1984 * opintl.h: Internationalised.
1985 * ppc-opc.c: Internationalised.
1986 * sparc-dis.c: Internationalised.
1987 * v850-dis.c: Internationalised.
1988 * v850-opc.c: Internationalised.
1990 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1992 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1993 (asm_hash_table_entries): New variable.
1994 (cgen_asm_init): Free asm_hash_table_entries.
1995 (hash_insn_array,hash_insn_list): New functions.
1996 (build_asm_hash_table): Use them. Hash macro insns as well.
1997 (cgen_asm_lookup_insn): Update.
1998 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1999 (dis_hash_table_entries): New variable.
2000 (cgen_dis_init): Free dis_hash_table_entries.
2001 (hash_insn_array,hash_insn_list): New functions.
2002 (build_dis_hash_table): Use them. Hash macro insns as well.
2003 (cgen_dis_lookup_insn): Update.
2004 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
2005 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
2006 (cgen_macro_insn_count): New function.
2007 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
2009 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
2011 * i386-dis.c (OP_DSSI): Print segment override.
2013 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
2015 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
2018 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
2020 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
2021 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
2022 * configure.in: Define and substitute WIN32LDFLAGS and
2024 * aclocal.m4: Rebuild with new libtool.
2025 * configure, Makefile.in: Rebuild.
2027 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
2029 * m32r-opc.c: Regenerate.
2031 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
2033 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
2034 before trying to copy it.
2035 * Makefile.in: Rebuild.
2037 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
2039 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
2041 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
2043 * ns32k-dis.c (bit_extract_simple): New function to extract bits
2044 from an arbitrary valid buffer instead of fetching them on demand
2046 (invalid_float): use bit_extract_simple() instead of bit_extract().
2048 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
2050 From H.J. Lu <hjl@gnu.org>:
2051 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
2054 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
2056 * Branched binutils 2.9.
2058 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
2060 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
2061 disassembling last 4 bytes of a section.
2063 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
2065 Fix some gcc -Wall warnings:
2066 * arc-dis.c (print_insn): Add casts to avoid warnings.
2067 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
2068 * d10v-dis.c (dis_long, dis_2_short): Likewise.
2069 * m10200-dis.c (disassemble): Likewise.
2070 * m10300-dis.c (disassemble): Likewise.
2071 * ns32k-dis.c (print_insn_ns32k): Likewise.
2072 * ppc-opc.c (insert_ral, insert_ram): Likewise.
2073 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
2074 * cgen-opc.c (cgen_keyword_search_next): Likewise.
2075 * d10v-dis.c (dis_long, dis_2_short): Likewise.
2076 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
2077 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
2078 * tic80-dis.c (print_one_instruction): Likewise.
2079 * w65-dis.c (print_operand): Likewise.
2080 * z8k-dis.c (fetch_data): Likewise.
2081 * a29k-dis.c: Add return type for find_byte_func_type.
2082 * arc-opc.c: Include <stdio.h>. Remove declarations of
2083 insert_multshift and extract_multshift.
2084 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
2086 (extract_value): Fully parenthesize expression.
2087 * h8500-dis.c (print_insn_h8500): Initialize local variables.
2088 * h8500-opc.h (h8500_table): Fully bracket initializer.
2089 * w65-opc.h (optable): Likewise.
2090 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
2091 * i386-dis.c (OP_E): Initialize local variables.
2092 * m10200-dis.c (print_insn_mn10200): Likewise.
2093 * mips-dis.c (print_insn_mips16): Likewise.
2094 * sh-dis.c (print_insn_shx): Likewise.
2095 * v850-dis.c (print_insn_v850): Likewise.
2096 * ns32k-dis.c (print_insn_arg): Declare.
2097 (get_displacement, invalid_float): Declare.
2098 (list_search, sign_extend, flip_bytes): Declare return type.
2099 (get_displacement): Likewise.
2100 (print_insn_arg): Likewise. Make d int. Fix sprintf format
2102 (print_insn_ns32k): Make i unsigned.
2103 (invalid_float): Make static. Declare type of val.
2104 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
2105 on each for iteration.
2106 * tic30-dis.c (get_indirect_operand): Likewise.
2107 * z8k-dis.c (print_insn_z8001): Declare return type.
2108 (print_insn_z8002): Likewise.
2109 (unparse_instr): Fix sprintf format strings.
2111 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
2113 * mips-opc.c: Add "sync.l" and "sync.p".
2115 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2117 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
2118 default m68k variant to recognize.
2120 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
2121 (ctrl, cobr, mem, ea): Likewise.
2122 (print_addr): Likewise. Remove cast.
2123 (ea): Cast argument of print_addr to bfd_vma.
2125 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
2127 (cgen_parse_unsigned_integer): Likewise.
2128 (cgen_parse_address): Likewise.
2130 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
2132 * i960-dis.c (ctrl): Add full braces to structure initialization.
2133 (cobr, mem, reg): Likewise.
2134 (ea): Correct parenthesization in expression.
2136 * cgen-asm.c: Include <ctype.h>.
2137 (build_asm_hash_table): Remove unused local variable i.
2138 (cgen_parse_keyword): Add casts to avoid warnings.
2140 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
2141 symbol. Fix indentation.
2142 (print_insn_little_arm): Likewise.
2144 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
2146 * configure.in: Use AM_DISABLE_SHARED.
2147 * aclocal.m4, configure: Rebuild with libtool 1.2.
2149 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
2151 These patches are courtesy of Jonathan Walton and Tony Thompson
2152 (athompso@cambridge.arm.com).
2154 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
2157 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
2158 both the offset and the label closest to the destination.
2160 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
2162 * m32r-opc.h: Regenerate.
2164 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
2166 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
2168 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
2170 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
2171 assume that info->symbols is non-empty.
2173 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
2175 * alpha-opc.c (cvtqs) There is no such thing.
2176 (cvttq): Missing most of the /*d variants.
2178 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
2180 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
2181 delayed branches or jumps.
2183 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
2185 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
2187 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
2188 * tic30-dis.c (print_branch): Likewise.
2190 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
2192 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
2193 saved_symbol code as it is no longer needed.
2195 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
2197 * cgen-asm.c: Include symcat.h.
2198 * cgen-dis.c,cgen-opc.c: Ditto.
2199 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
2201 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
2203 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
2205 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
2207 * m32r-opc.[ch]: Regenerate.
2209 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
2211 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
2212 arguments. Don't perform validation here.
2213 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
2215 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
2217 * m32r-opc.c: Regenerate.
2219 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
2221 * Makefile.am (AUTOMAKE_OPTIONS): Define.
2222 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
2224 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
2226 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
2228 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
2230 * configure.in: Get the version number from BFD.
2231 * configure: Rebuild.
2233 From H.J. Lu <hjl@gnu.org>:
2234 * Makefile.am (libopcodes_la_LDFLAGS): Define.
2235 * Makefile.in: Rebuild.
2237 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
2239 * m32r-opc.c: Regenerate.
2240 * m32r-opc.h: Regenerate.
2242 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
2244 * m32r-opc.c: Regenerate.
2246 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
2248 Fix rac to accept only a0:
2249 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
2250 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
2251 Introduce OPERAND_GPR.
2252 * d10v-dis.c (print_operand): Likewise.
2254 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
2256 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
2257 (cgen_hw_lookup): Make result const.
2258 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2260 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
2262 * configure, aclocal.m4: Rebuild with new libtool.
2264 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
2266 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
2267 instructions use a PC relative branch, not absolute.
2269 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
2271 * configure.in: Set libtool_enable_shared rather than
2272 libtool_shared. Remove diversion hack.
2273 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
2275 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
2277 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
2278 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2280 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
2282 * tic30-dis.c: New file.
2283 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
2284 * configure.in: Handle bfd_tic30_arch.
2285 * Makefile.am: Rebuild dependencies.
2286 (CFILES): Add tic30-dis.c
2287 (ALL_MACHINES): Add tic30-dis.lo.
2288 * configure, Makefile.in: Rebuild.
2290 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
2292 * m32r-opc.h (HAVE_CPU_M32R): Define.
2294 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
2296 * v850-opc.c (insertion routines): If both alignment and size is
2297 wrong then report this.
2299 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
2301 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
2302 Only recognize instructions for the current target_processor.
2304 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
2306 * d10v-dis.c (PC_MASK): Correct value.
2307 (print_operand): If there's a reloc, don't calculate the
2308 address because they could be in different sections.
2310 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
2312 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
2313 instruction after the 4650's "mul" instruction; nobody's using the
2314 4010 these days. If object files someday indicate which processor
2315 variant they're intended for, we can do a better job at this.
2317 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
2319 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
2320 table provided entry size. Use CGEN_INSN_MNEMONIC.
2321 (cgen_parse_keyword): Rewrite.
2322 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
2323 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
2324 * cgen-opc.c: Clean up pass over `struct foo' usage.
2325 (cgen_keyword_lookup_value): Handle "" entry.
2326 (cgen_keyword_add): Likewise.
2328 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
2330 * mips-opc.c: Add FP_D to s.d instruction flags.
2332 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2334 * m68k-opc.c (halt, pulse): Enable them on the 68060.
2336 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
2338 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
2339 PC relative offset forms before the 15 bit forms. An assembler command
2340 line option now chooses the default.
2342 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
2344 * d30v-opc.c (d30v_opcode_table): Set new flags bits
2345 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
2347 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
2349 * configure: Only build libopcodes shared if --enable-shared's value
2350 was `yes', or was set to `*opcodes*'.
2351 * aclocal.m4: Likewise.
2352 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
2353 original source of this bit of code. It's not clear what the best fix
2356 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
2358 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
2359 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
2360 offset forms before the 15 bit forms, to default to the long forms.
2362 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
2364 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
2366 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
2368 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
2369 symbol if none is present.
2370 (print_insn_big_arm): Prevent examination of stored symbol if
2373 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
2375 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
2377 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
2379 * disassemble.c: Remove disasm_symaddr() function.
2381 * arm-dis.c: Use info->symbol instead of info->flags to determine
2382 if disassmbly should be in Thumb or Arm mode.
2384 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
2386 * arm-dis.c: Add support for disassembling Thumb opcodes.
2387 (print_insn_thumb): New function.
2389 * disassemble.c (disasm_symaddr): New function.
2391 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
2392 (thumb_opcodes): Table of Thumb opcodes.
2394 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2396 * m68k-opc.c (btst): Change Dd@s to Dd;b.
2398 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
2399 and 'v' as operand types.
2401 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
2403 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
2404 <olivier.carmona@di.epfl.ch>.
2405 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
2406 which has a two word opcode with a one word argument.
2408 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
2410 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
2411 unsigned, not signed.
2412 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
2414 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2416 * d10v-dis.c (print_operand):
2417 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
2419 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2421 * d10v-opc.c (OPERAND_FLAG): Split into:
2422 (OPERAND_FFLAG, OPERAND_CFLAG) .
2426 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
2428 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
2429 field for all INSN_MACRO's.
2430 * mips16-opc.c: same
2432 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
2434 * mips-opc.c (sync,cache): These are 3900 insns.
2436 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2438 sh-opc.h (sh_table): Remove ftst/nan.
2440 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
2442 * mips-opc.c (ffc, ffs): Fix mask.
2444 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2446 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2449 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2451 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2452 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2454 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2456 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2457 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2459 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2461 * v850-dis.c (disassemble): Replace // with /* ... */
2463 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2465 * sparc-opc.c: Add wr & rd for v9a asr's.
2466 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2467 (v9a_asr_reg_names): New variable.
2468 Patch from David Miller <davem@vger.rutgers.edu>.
2470 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2472 * sparc-opc.c (v9notv9a): New insn type.
2473 (IMPDEP): Move to the end to not conflict with edge8 et al.
2474 Patch from David Miller <davem@vger.rutgers.edu>.
2476 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2478 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2480 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2482 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2484 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2486 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2487 of disassemble_info structure to determine if an overlay address
2488 has a matching symbol in low memory.
2490 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2491 new symbol_at_address_func field in disassemble_info structure.
2493 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2495 * v850-opc.c (extract_d22): Use signed arithmatic.
2497 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2499 * mips-opc.c: Three op mult is not an ISA insn.
2501 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2503 * mips-opc.c: Fix formatting.
2505 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2507 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2508 than assuming that char is signed. Explicitly sign extend 16 bit
2509 values, rather than assuming that short is 16 bits.
2510 (OP_sI, OP_J, OP_DIR): Likewise.
2512 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2514 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2517 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2519 * v850-opc.c: Fix typo in comment.
2521 * v850-dis.c (disassemble): Add test of processor type when
2522 determining opcodes.
2524 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2526 * configure.in: Use a diversion to set enable_shared before the
2527 arguments are parsed.
2528 * configure: Rebuild.
2530 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2532 * m68k-opc.c (TBL1): Use ! rather than `.
2533 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2535 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2537 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2539 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2541 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2544 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2545 * aclocal.m4: Rebuild with new libtool.
2546 * configure: Rebuild.
2548 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2550 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2552 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2554 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2556 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2558 * v850-opc.c (v850_opcodes): Further rearrangements.
2560 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2562 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2564 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2566 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2569 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2571 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2573 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2575 * v850-opc.c: Initialise processors field of v850_opcode structure.
2577 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2579 Merge changes from Martin Hunt:
2581 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2583 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2584 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2585 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2587 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2589 * d30v-dis.c (print_insn): First operand of d*i (delayed
2590 branch) instructions is relative.
2592 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2593 (d30v_operand_table): Add IMM6S3 type.
2594 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2596 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2597 and cmp instructions.
2599 * d30v-opc.c: Correct entries for repeat*, and sat*.
2600 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2601 types. Correct several formats.
2603 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2605 * d30v-opc.c (pre_defined_registers): Change control registers.
2607 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2608 SHORT_C2. Manual was incorrect.
2610 * d30v-dis.c (lookup_opcode): Return value now indicates
2611 if an opcode has a short and a long form. Used for deciding
2612 to append a ".s" or ".l".
2613 (print_insn): Append a ".s" to an instruction if it is
2614 the short form and ".l" if it is a long form. Do not append
2615 anything if the instruction has only one possible size.
2617 * d30v-opc.c: Change mulx2h to require an even register.
2618 New form: SHORT_A2; a SHORT_A form that needs an even
2619 register as the first operand.
2621 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2622 instruction was not being disassembled if there were an odd
2623 number of instructions.
2625 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2627 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2629 * v850-dis.c (disassemble): Improved display of register lists.
2631 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2633 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2634 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2635 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2636 fandnot1s, fandnot2s.
2638 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2640 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2642 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2644 * cgen-asm.c (cgen_parse_address): New argument resultp.
2645 All callers updated.
2646 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2648 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2650 * mn10200-dis.c (disassemble): PC relative instructions are
2651 relative to the next instruction, not the current instruction.
2653 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2655 * v850-dis.c (disassemble): Only signed extend values that are not
2656 returned by extract functions.
2657 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2659 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2661 * v850-opc.c: Update comments. Remove use of
2662 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2664 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2666 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2668 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2670 * configure: Rebuilt with latest devo autoconf for NT support.
2672 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2674 * v850-dis.c (disassemble): Use curly brace syntax for register
2677 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2678 where r0 is being used as a destination register.
2680 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2682 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2684 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2686 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2688 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2690 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2691 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2694 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2696 * configure (cgen_files): Add support for v850e target.
2697 * configure.in (cgen_files): Add support for v850e target.
2699 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2701 * configure (cgen_files): Add support for v850ea target.
2702 * configure.in (cgen_files): Add support for v850ea target.
2704 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2706 * configure.in (bfd_arc_arch): Add.
2707 * configure: Rebuild.
2708 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2709 * Makefile.in: Rebuild.
2710 * arc-dis.c, arc-opc.c: New files.
2711 * disassemble.c (ARCH_all): Define ARCH_arc.
2712 (disassembler): Add ARC support.
2714 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2716 * v850-dis.c (disassemble): Add support for v850EA instructions.
2718 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2719 (v850_opcodes): Add v850EA instructions.
2721 * v850-dis.c (disassemble): Add support for v850E instructions.
2723 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2724 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2725 insert_spe, extract_spe): New Functions.
2726 (v850_opcodes): Add v850E instructions.
2728 * v850-opc.c: Reorganised and re-layed out to improve readability
2731 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2733 * configure: Rebuild with autoconf 2.12.1.
2735 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2737 * aclocal.m4, configure: Rebuild with new automake patches.
2739 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2741 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2742 * acinclude.m4: Just include acinclude.m4 from BFD.
2743 * aclocal.m4, configure: Rebuild.
2745 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2747 * Makefile.am: New file, based on old Makefile.in.
2748 * acconfig.h: New file.
2749 * acinclude.m4: New file.
2750 * stamp-h.in: New file.
2751 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2752 Removed shared library handling; now handled by libtool. Replace
2753 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2754 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2755 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2756 handling in AC_OUTPUT.
2757 * dep-in.sed: Change .o to .lo.
2758 * Makefile.in: Now built with automake.
2759 * aclocal.m4: Now built with aclocal.
2760 * config.in, configure: Rebuild.
2762 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2764 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2766 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2768 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2770 * sparc-dis.c (sorted_opcodes): New static local.
2771 (struct opcode_hash): `opcode' is pointer to const element.
2772 (build_hash): First arg is now table of sorted pointers.
2773 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2774 (compare_opcodes): Update.
2776 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2778 * cgen-opc.c: #include <ctype.h>.
2779 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2780 Handle case insensitive hashing.
2781 (hash_keyword_value): Change type of `value' to unsigned int.
2783 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2785 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2786 precision FP, mark it as such. Likewise for double precision
2787 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2790 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2792 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2794 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2795 nesting depth when all the macros are expanded.
2797 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2799 * sparc-opc.c: The fcmp v9a instructions take an integer register
2800 as a destination, not a floating point register. From Christian
2801 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2803 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2805 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2806 syntax. From Roman Hodek
2807 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2809 * i386-dis.c (twobyte_has_modrm): Fix pand.
2811 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2813 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2815 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2817 * arm-dis.c: Add prototypes for arm_decode_shift and
2820 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2822 * mips-opc.c: Add r3900 insns.
2824 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2826 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2827 print delay slot instructions on the same line. When using a PC
2828 relative load, add a comment with the value being loaded if it can
2831 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2833 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2834 to pushS/popS for segment regs and byte constant so that
2835 pushw/popw printed when in 16 bit data mode.
2837 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2838 print cbtw, cwtd in 16 bit data mode.
2839 * i386-dis.c (putop): extra case W to support above.
2841 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2842 address size prefix in 16 bit address mode.
2844 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2846 * sh-dis.c: Reindent. Rename local variable fprintf to
2849 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2851 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2853 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2855 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2857 * mips16-opc.c (mip16_opcodes): same.
2859 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2861 * m68k-opc.c (moveb): Change $d to %d.
2863 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2865 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2866 (twobyte_has_modrm): Likewise.
2868 (OP_MMX, OP_EM, OP_MS): New static functions.
2870 * i386-dis.c: Revert patch of April 4. The output now matches
2873 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2875 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2878 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2880 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2882 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2884 * Makefile.in (install): Depend upon installdirs.
2885 (installdirs): New target.
2887 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2889 From Thomas Graichen <graichen@rzpd.de>:
2890 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2891 * configure: Rebuild.
2893 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2895 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2896 Delete string{,s}.h support.
2898 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2900 * cgen-asm.c (cgen_parse_operand_fn): New global.
2901 (cgen_parse_{{,un}signed_integer,address}): Update call to
2902 cgen_parse_operand_fn.
2903 (cgen_init_parse_operand): New function.
2904 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2905 from cgen_asm_init_parse.
2906 (m32r_cgen_assemble_insn): New operand `errmsg'.
2907 Delete call to as_bad, return error message to caller.
2908 (m32r_cgen_asm_hash_keywords): #if 0 out.
2910 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2912 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2914 [case 'J']: Fix typo in register name.
2916 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2918 * configure.in: Substitute SHLIB_LIBS.
2919 * configure: Rebuild.
2920 * Makefile.in (SHLIB_LIBS): New variable.
2921 ($(SHLIB)): Use $(SHLIB_LIBS).
2923 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2925 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2927 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2929 * disassemble.c (disassembler): Handle m32r.
2931 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2933 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2934 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2935 * Makefile.in (CFILES): Add them.
2936 (ALL_MACHINES): Add them.
2937 (dependencies): Regenerate.
2938 * configure.in (cgen_files): New variable.
2939 (bfd_m32r_arch): Add entry.
2940 * configure: Regenerate.
2942 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2944 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2945 * configure: Rebuild.
2947 * Makefile.in: Rebuild dependencies.
2949 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2951 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2954 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2956 * Branched binutils 2.8.
2958 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2960 * m10200-dis.c: Rename from mn10200-dis.c.
2961 * m10200-opc.c: Rename from mn10200-opc.c.
2962 * m10300-dis.c: Rename from mn10300-dis.c
2963 * m10300-opc.c: Rename from mn10300-opc.c.
2964 * Makefile.in: Update accordingly.
2966 * mips16-opc.c: Add mul and dmul macros.
2968 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2970 * makefile.vms: Update CFLAGS, add clean target.
2972 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2974 * mips-opc.c: Add "wait". From Ralf Baechle
2975 <ralf@gnu.ai.mit.edu>.
2977 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2978 * configure, config.in: Rebuild.
2979 * sysdep.h: Include <stdlib.h> if it exists.
2980 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2982 * Makefile.in: Rebuild dependencies.
2984 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2986 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2987 Andrew Bray <andy@madhouse.demon.co.uk>.
2989 * mips-opc.c: Add cast when setting mips_opcodes.
2991 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2993 * v850-dis.c (disassemble): Fix sign extension problem.
2994 * v850-opc.c (extract_d*): Fix sign extension problems to make
2995 disassembly calculate branch offsets correctly.
2997 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2999 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
3001 * mips-opc.c: Add dctr and dctw.
3003 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3005 * d30v-dis.c (print_insn): Change the way signed constants
3008 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
3010 * Makefile.in (BFD_H): New variable.
3011 (HFILES): New variable.
3012 (CFILES): Add all C files.
3013 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
3014 Delete old dependencies, and build new ones.
3015 * dep-in.sed: New file.
3017 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
3019 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
3021 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
3023 * mn10200-opc.c: Change "trap" to "syscall".
3024 * mn10300-opc.c: Add new "syscall" instruction.
3026 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
3028 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
3029 mulul insns on the coldfire.
3031 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
3033 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
3034 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
3035 (print_insn_little_arm): Likewise.
3037 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
3039 Based on patches from H.J. Lu <hjl@lucon.org>:
3040 * i386-dis.c (fetch_data): Add prototype.
3041 * m68k-dis.c (fetch_data): Add prototype.
3042 (dummy_print_address): Add prototype. Make static.
3043 * ppc-opc.c (valid_bo): Add prototype.
3044 * sparc-dis.c (build_hash_table): Add prototype.
3045 (is_delayed_branch, compute_arch_mask): Add prototypes.
3046 (print_insn_sparc): Make several local variables const.
3047 (compare_opcodes): Change arguments to const PTR. Add prototype.
3048 * sparc-opc.c (arg): Change name field to be const.
3049 (lookup_name, lookup_value): Add prototypes. Change table and
3050 name parameters to be const.
3051 (sparc_encode_asi): Change name parameter to be const.
3052 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
3053 (sparc_encode_sparclet_cpreg): Likewise.
3054 (sparc_decode_asi): Change return type to be const.
3055 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
3056 (sparc_decode_sparclet_cpreg): Likewise.
3058 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
3060 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
3061 Solaris doesn't like the combined options, and the -f is
3063 (stamp-tshlink, install): Likewise.
3065 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
3067 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
3070 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
3072 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
3074 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
3076 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
3079 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
3081 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
3083 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
3085 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
3087 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
3089 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
3091 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3093 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
3094 floatformat_to_double to make portable.
3095 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
3098 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
3100 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
3101 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
3103 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3105 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
3106 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
3108 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
3110 * tic80-opc.c (LSI_SCALED): Renamed from this ...
3111 (OFF_SL_BR_SCALED): ... to this, and added the flag
3112 TIC80_OPERAND_BASEREL to the flags word.
3113 (tic80_opcodes): Replace all occurances of LSI_SCALED with
3116 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
3118 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
3119 Change mips_opcodes from const array to a pointer,
3120 and change bfd_mips_num_opcodes from const int to int,
3121 so that we can increase the size of the mips opcodes table
3124 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
3126 * tic80-opc.c (tic80_predefined_symbols): Revert change to
3127 store BITNUM values in the table in one's complement form
3128 to match behavior when assembler is given a raw numeric
3129 value for a BITNUM operand.
3130 * tic80-dis.c (print_operand_bitnum): Ditto.
3132 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3134 * d30v-opc.c: Removed references to FLAG_X.
3136 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
3138 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
3140 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3142 * Makefile.in: Added d30v object files.
3143 * configure: (bfd_d30v_arch) Rebuilt.
3144 * configure.in: (bfd_d30v_arch) Added new case.
3145 * d30v-dis.c: New file.
3146 * d30v-opc.c: New file.
3147 * disassemble.c (disassembler) Add entry for d30v.
3149 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
3151 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
3152 representations for the floating point BITNUM values.
3154 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
3156 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
3157 in the table in one's complement form, as they appear in the
3159 (tic80_symbol_to_value): Use macros to access predefined
3161 (tic80_value_to_symbol): Ditto.
3162 (tic80_next_predefined_symbol): New function.
3163 * tic80-dis.c (print_operand_bitnum): Remove code that did
3164 one's complement for BITNUM values.
3166 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
3168 * makefile.vms: Remove 8 bit characters. Update to latest
3171 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
3173 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
3175 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
3177 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
3178 (IMM24_PCREL): Likewise.
3180 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
3182 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
3183 address for an extended PC relative instruction that is not a
3186 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3188 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
3191 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
3193 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
3194 (tic80_opcodes): Sort entries so that long immediate forms
3195 come after short immediate forms, making it easier for
3196 assembler to select the right one for a given operand.
3198 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
3200 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
3202 (print_insn_mips16): Likewise.
3204 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
3206 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
3207 a symbol class that restricts translation to just that
3208 class (general register, condition code, etc).
3210 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
3212 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
3213 and REG_DEST_E for register operands that have to be
3214 an even numbered register. Add REG_FPA for operands that
3215 are one of the floating point accumulator registers.
3216 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
3217 (tic80_opcodes): Change entries that need even numbered
3218 register operands to use the new operand table entries.
3219 Add "or" entries that are identical to "or.tt" entries.
3221 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
3223 * mips16-opc.c: Add new cases of exit instruction for
3225 * mips-dis.c (print_mips16_insn_arg): Display floating point
3226 registers in operands of exit instruction. Print `$' before
3227 register names in operands of entry and exit instructions.
3229 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
3231 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
3232 pairs for all predefined symbols recognized by the assembler.
3233 Also used by the disassembling routines.
3234 (tic80_symbol_to_value): New function.
3235 (tic80_value_to_symbol): New function.
3236 * tic80-dis.c (print_operand_control_register,
3237 print_operand_condition_code, print_operand_bitnum):
3238 Remove private tables and use tic80_value_to_symbol function.
3240 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3242 * d10v-dis.c (print_operand): Change address printing
3243 to correctly handle PC wrapping. Fixes PR11490.
3245 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
3247 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
3250 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
3252 * mips-dis.c (print_insn_mips16): Set insn_info information.
3253 (print_mips16_insn_arg): Likewise.
3255 * mips-dis.c (print_insn_mips16): Better handling of an extend
3256 opcode followed by an instruction which can not be extended.
3258 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
3260 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
3261 coldfire moveb instruction to not allow an address register as
3262 destination. Although the documentation does not indicate that
3263 this is invalid, experiments uncovered unexpected behavior.
3264 Added a comment explaining the situation. Thanks to Andreas
3265 Schwab for pointing this out to me.
3267 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
3269 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
3270 entries are presorted so that entries with the same mnemonic are
3271 adjacent to each other in the table. Sort the entries for each
3272 instruction so that this is true.
3274 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3276 * m68k-dis.c: Include <libiberty.h>.
3277 (print_insn_m68k): Sort the opcode table on the most significant
3278 nibble of the opcode.
3280 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
3282 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
3283 "vsub", "vst", "xnor", and "xor" instructions.
3284 (V_a1): Renamed from V_a, msb of accumulator reg number.
3285 (V_a0): Add macro, lsb of accumulator reg number.
3287 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
3289 * tic80-dis.c (print_insn_tic80): Broke excessively long
3290 function up into several smaller ones and arranged for
3291 the instruction printing function to be callable recursively
3292 to print vector instructions that have both a load and a
3293 math instruction packed into a single opcode.
3294 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
3295 to explain why it comes after the other vector opcodes.
3297 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
3299 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
3300 move insns to handle immediate operands.
3302 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3304 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
3305 fix operand mask in the "moveml" entries for the coldfire.
3307 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
3309 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
3310 New macros for building vector instruction opcodes.
3311 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
3312 FMT_LI, which were unused. The field is now a flags field.
3313 Remove some opcodes that are possible, but illegal, such
3314 as long immediate instructions with doubles for immediate
3315 values. Add "vadd" and "vld" instructions.
3317 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
3319 * tic80-opc.c (tic80_operands): Reorder some table entries to make
3320 the order more logical. Move the shift alias instructions ("rotl",
3321 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
3322 interspersed with the regular sr.x and sl.x instructions. Add
3323 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
3324 "sub", "subu", "swcr", and "trap".
3326 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
3328 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
3329 (OFF_SL_PC): Renamed from OFF_SL.
3330 (OFF_SS_BR): New operand type for base relative operand.
3331 (OFF_SL_BR): New operand type for base relative operand.
3332 (REG_BASE): New operand type for base register operand.
3333 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
3334 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
3335 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
3337 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3338 10 char field, padded with spaces on rhs, rather than a string
3339 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
3340 than old TIC80_OPERAND_RELATIVE. Add support for new
3341 TIC80_OPERAND_BASEREL flag bit.
3343 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
3345 * tic80-dis.c (print_insn_tic80): Print floating point operands
3347 * tic80-opc.c (SPFI): Add single precision floating point
3348 immediate operand type.
3349 (ROTATE): Add rotate operand type for shifts.
3350 (ENDMASK): Add for shifts.
3351 (n): Macro for the 'n' bit.
3352 (i): Macro for the 'i' bit.
3353 (PD): Macro for the 'PD' field.
3354 (P2): Macro for the 'P2' field.
3355 (P1): Macro for the 'P1' field.
3356 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3359 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
3361 * mn10200-dis.c (disassemble): Mask off unwanted bits after
3362 adding in current address for pc-relative operands.
3364 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3366 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3367 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3368 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3369 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3370 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3371 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3372 (REG_SCALED, LSI_SCALED): New operand types.
3373 (E): New macro for 'E' bit at bit 27.
3374 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3375 opcodes, including the various size flavors (b,h,w,d) for
3376 the direct load and store instructions.
3378 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3380 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3382 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3383 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3384 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3385 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3386 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3387 masks with "MASK_* & ~M_*" to get the M bit reset.
3388 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3390 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3392 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3393 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3394 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3396 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3397 CC, SICR, and LICR table entries.
3398 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3399 "bcnd", and "brcr" opcodes.
3401 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3403 * ppc-opc.c (powerpc_operands): Make comment match the
3404 actual fields (no shift field).
3405 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3406 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3407 partial implementation, work in progress.
3408 * tic80-opc.c (tic80_operands): Begin construction operands table.
3409 (tic80_opcodes): Continue populating opcodes table and start
3410 filling in the operand indices.
3411 (tic80_num_opcodes): Add this.
3413 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3415 * m68k-opc.c: Add #B case for moveq.
3417 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3419 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3420 before they are used.
3422 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3424 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3425 for "breakpoint" instruction.
3427 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3429 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3430 (dep): Use ALL_CFLAGS rather than CFLAGS.
3432 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3434 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3437 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3439 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3440 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3442 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3444 * mips16-opc.c: Add "abs".
3446 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3448 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3449 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3450 (disassembler): Add bfd_arch_tic80 support to set disassemble
3451 to print_insn_tic80.
3452 * tic80-dis.c (print_insn_tic80): Add stub.
3454 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3456 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3457 * configure: Regenerate with autoconf.
3458 * tic80-dis.c: Add file.
3459 * tic80-opc.c: Add file.
3461 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3463 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3465 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3467 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3468 (mn10200_opcodes): Use it for some logicals and btst insns.
3469 Add "break" and "trap" instructions.
3471 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3473 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3475 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3477 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3478 relative load or add now depends upon whether the instruction is
3481 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3483 * mn10200-dis.c: Finish writing disassembler.
3484 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3485 Fix mask for "jmp (an)".
3487 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3488 handle endianness issues for mn10300.
3490 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3492 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3494 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3495 instruction. Fix opcode field for "movb (imm24),dn".
3497 * mn10200-opc.c (mn10200_operands): Fix insertion position
3500 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3502 * mn10200-opc.c: Create mn10200 opcode table.
3503 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3504 but moving along nicely.
3506 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3508 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3510 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3512 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3513 specifiers for fmovem* instructions.
3515 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3517 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3519 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3521 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3524 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3526 * mn10300-opc.c: Add some comments explaining the various
3529 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3531 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3533 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3536 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3537 operand specifiers in fmovm* instructions.
3539 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3541 * ppc-opc.c (insert_li): Give an error if the offset has the two
3542 least significant bits set.
3544 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3546 * mips-dis.c (print_insn_mips16): Separate the instruction from
3547 the arguments with a tab, not a space.
3549 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3551 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3554 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3557 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3559 * configure: Rebuild with autoconf 2.12.
3561 Add support for mips16 (16 bit MIPS implementation):
3562 * mips16-opc.c: New file.
3563 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3564 (mips16_reg_names): New static array.
3565 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3566 after seeing a 16 bit symbol.
3567 (print_insn_little_mips): Likewise.
3568 (print_insn_mips16): New static function.
3569 (print_mips16_insn_arg): New static function.
3570 * mips-opc.c: Add jalx instruction.
3571 * Makefile.in (mips16-opc.o): New target.
3572 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3573 * configure: Rebuild.
3575 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3577 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3578 operand specifiers in *save, *restore and movem* instructions.
3580 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3583 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3584 register operands for immediate arithmetic, not, neg, negx, and
3585 set according to condition instructions.
3587 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3588 specifier of the effective-address operand in immediate forms of
3589 arithmetic instructions. The specifier for the immediate operand
3590 notes how and where the constant will be stored.
3592 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3594 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3597 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3600 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3602 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3604 * mn10300-dis.c (disassemble): Handle register lists.
3606 * mn10300-opc.c: Fix handling of register list operand for
3607 "call", "ret", and "rets" instructions.
3609 * mn10300-dis.c (disassemble): Print PC-relative and memory
3610 addresses symbolically if possible.
3611 * mn10300-opc.c: Distinguish between absolute memory addresses,
3612 pc-relative offsets & random immediates.
3614 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3616 (disassemble): Handle SPLIT and EXTENDED operands.
3618 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3620 * mn10300-dis.c: Rough cut at printing some operands.
3622 * mn10300-dis.c: Start working on disassembler support.
3623 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3625 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3627 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3629 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3631 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3633 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3635 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3636 register argument is calls and jmp instructions.
3638 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3640 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3641 getx operand. Fix opcode for mulqu imm,dn.
3643 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3645 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3646 in MN10300_OPERAND_SPLIT operands for how many bits
3647 appear in the basic insn word. Add IMM32_HIGH24,
3648 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3649 (mn10300_opcodes): Use new operands as needed.
3651 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3652 for bset, bclr, btst instructions.
3653 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3655 * mn10300-opc.c (mn10300_operands): Remove many redundant
3656 operands. Update opcode table as appropriate.
3657 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3658 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3660 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3662 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3663 operands (for indexed load/stores). Fix bitpos for DI
3664 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3665 few instructions that insert immediates/displacements in the
3666 middle of the instruction. Add IMM8E for 8 bit immediate in
3667 the extended part of an instruction.
3668 (mn10300_operands): Use new opcodes as appropriate.
3670 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3672 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3673 sequential so the assembler never parallelizes it with
3676 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3678 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3679 a data/address register that appears in register field 0
3680 and register field 1.
3681 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3683 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3685 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3686 standard disassembly.
3688 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3689 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3690 Recategorize PALcode instructions.
3692 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3694 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3696 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3698 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3699 there are no operand types.
3701 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3703 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3705 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3707 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3709 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3711 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3713 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3714 and sst.w instructions.
3716 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3719 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3721 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3724 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3726 * ppc-opc.c (PPCPWR2): Define.
3727 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3730 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3732 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3733 field for movhu instruction.
3735 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3736 cast value to "long" not "signed long" to keep hpux10
3739 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3741 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3744 * mn10300-opc.c (FMT*): Remove definitions.
3746 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3747 for shift-by-register opcodes.
3749 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3750 into [AD][MN][01] for encoding the position of the register
3753 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3755 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3756 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3758 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3760 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3761 Fix various typos. Add "PAREN" operand.
3762 (MEM, MEM2): Define.
3763 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3764 operands. Fix several typos.
3766 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3769 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3771 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3772 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3774 (mn10300_opcodes): Break opcode format out into its own field.
3775 Update many operand fields to deal with signed vs unsigned
3776 issues. Fix one or two typos in the "mov" instruction
3777 opcode, mask and/or operand fields.
3779 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3781 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3782 m68851 wasn't reset.
3784 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3786 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3787 all opcodes. Very rough cut at operands for all opcodes.
3789 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3792 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3794 * mn10200-opc.c, mn10300-opc.c: New files.
3795 * mn10200-dis.c, mn10300-dis.c: New files.
3796 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3797 * disassemble.c: Break mn10x00 support into 10200 and 10300
3799 * configure.in: Likewise.
3800 * configure: Rebuilt.
3802 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3804 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3806 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3808 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3810 * disassemble (ARCH_mn10x00): Define.
3811 (disassembler): Handle bfd_arch_mn10x00.
3812 * configure.in: Recognize bfd_mn10x00_arch.
3813 * configure: Rebuilt.
3815 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3817 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3818 accordingly. Don't declare functions using op_rtn.
3820 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3822 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3823 params to be more standard.
3824 * (disassemble): Print absolute addresses and symbolic names for
3825 branch and jump targets.
3826 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3828 * (v850_opcodes): Add breakpoint insn.
3830 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3832 * m68k-opc.c: Move the fmovemx data register cases before the
3833 other cases, so that they get recognized before the data register
3834 does gets treated as a degenerate register list.
3836 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3838 * mips-opc.c: Add a case for "div" and "divu" with two registers
3839 and a destination of $0.
3841 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3843 * mips-dis.c (print_insn_arg): Add prototype.
3844 (_print_insn_mips): Ditto.
3846 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3848 * mips-dis.c (print_insn_arg): Print condition code registers as
3851 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3853 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3855 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3857 * v850-dis.c (disassemble): Make static. Provide prototype.
3859 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3861 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3864 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3866 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3867 ']' characters into the output stream.
3868 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3869 Add "memop" field to all opcodes (for the disassembler).
3870 Reorder opcodes so that "nop" comes before "mov" and "jr"
3871 comes before "jarl".
3873 * v850-dis.c (print_insn_v850): Fix typo in last change.
3875 * v850-dis.c (print_insn_v850): Properly handle disassembling
3876 a two byte insn at the end of a memory region when the memory
3877 region's size is only two byte aligned.
3879 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3881 * v850-dis.c (v850_reg_names): Define.
3882 (v850_sreg_names, v850_cc_names): Likewise.
3883 (disassemble): Very rough cut at printing operands (unformatted).
3885 * v850-opc.c (BOP_MASK): Fix.
3886 (v850_opcodes): Fix mask for jarl and jr.
3888 * v850-dis.c: New file. Skeleton for disassembler support.
3889 * Makefile.in Remove v850 references, they're not needed here.
3890 * configure.in: Add v850-dis.o when building v850 toolchains.
3891 * configure: Rebuilt.
3892 * disassemble.c (disassembler): Call v850 disassembler.
3894 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3895 (insert_d8_6, extract_d8_6): New functions.
3896 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3897 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3899 (IF4A, IF4B): Use "D7" instead of "D7S".
3900 (IF4C, IF4D): Use "D8_7" instead of "D8".
3901 (IF4E, IF4F): New. Use "D8_6".
3902 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3903 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3905 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3906 (v850_operands): Change D16 to D16_15, use special insert/extract
3907 routines. New new D16 that uses the generic insert/extract code.
3908 (IF7A, IF7B): Use D16_15.
3909 (IF7C, IF7D): New. Use D16.
3910 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3912 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3913 message. Issue an error if the branch offset is odd.
3915 * v850-opc.c: Add notes about needing special insert/extract
3916 for all the load/store insns, except "ld.b" and "st.b".
3918 * v850-opc.c (insert_d22, extract_d22): New functions.
3919 (v850_operands): Use insert_d22 and extract_d22 for
3921 (insert_d9): Fix range check.
3923 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3925 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3926 and set bits field to D9 and D22 operands.
3928 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3930 * v850-opc.c (v850_operands): Define SR2 operand.
3931 (v850_opcodes): "ldsr" uses R1,SR2.
3933 * v850-opc.c (v850_opcodes): Fix opcode specs for
3934 sld.w, sst.b, sst.h, sst.w, and nop.
3936 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3938 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3939 end of the opcode table.
3941 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3943 * d10v-opc.c (pre_defined_registers): Added register pairs,
3944 "r0-r1", "r2-r3", etc.
3946 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3948 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3949 Create I16U for an unsigned 16bit mmediate operand.
3950 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3952 * v850-opc.c (v850_operands): Define EP operand.
3953 (IF4A, IF4B, IF4C, IF4D): Use EP.
3955 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3956 with immediate operand, "movhi". Tweak "ldsr".
3958 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3959 correct. Get sld.[bhw] and sst.[bhw] closer.
3961 * v850-opc.c (v850_operands): "not" is a two byte insn
3963 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3965 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3967 * v850-opc.c (two): Get order of words correct.
3969 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3971 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3972 register source and destination operands.
3973 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3975 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3976 same thinko in "trap" opcode.
3978 * v850-opc.c (v850_opcodes): Add initializer for size field
3981 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3982 Add D8 for 8-bit unsigned field in short load/store insns.
3983 (IF4A, IF4D): These both need two registers.
3984 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3985 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3986 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3987 for "ldsr" and "stsr".
3988 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3991 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3992 short store word (sst.w).
3994 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3996 * v850-opc.c (v850_operands): Added insert and extract fields,
3997 pointers to functions that handle unusual operand encodings.
3999 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
4001 * v850-opc.c (v850_opcodes): Enable "trap".
4003 * v850-opc.c (v850_opcodes): Fix order of displacement
4004 and register for "set1", "clr1", "not1", and "tst1".
4006 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
4008 * v850-opc.c (v850_operands): Add "B3" support.
4009 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
4012 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
4014 * v850-opc.c: Close unterminated comment.
4016 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
4018 * v850-opc.c (v850_operands): Add flags field.
4019 (v850_opcodes): add move opcodes.
4021 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
4023 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
4024 * configure: (bfd_v850v_arch) Add new case.
4025 * configure.in: (bfd_v850_arch) Add new case.
4026 * v850-opc.c: New file.
4028 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
4030 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
4032 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4034 * d10v-opc.c: Add additional information to the opcode
4035 table to help determinine which instructions can be done
4038 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
4040 * mpw-make.sed: Update editing of include pathnames to be
4043 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
4045 * arm-opc.h: Added "bx" instruction definition.
4047 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
4049 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
4051 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4053 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
4055 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4057 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
4059 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
4061 * makefile.vms: Update for alpha-opc changes.
4063 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
4065 * i386-dis.c (print_insn_i386): Actually return the correct value.
4066 (ONE, OP_ONE): #ifdef out; not used.
4068 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4070 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
4071 Changed subi operand type to treat 0 as 16.
4073 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
4075 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
4078 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
4080 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
4081 memory transfer instructions. Add new format string entries %h and %s.
4082 * arm-dis.c: (print_insn_arm): Provide decoding of the new
4085 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4087 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
4088 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
4090 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
4092 * alpha-dis.c (print_insn_alpha_osf): Remove.
4093 (print_insn_alpha_vms): Remove.
4094 (print_insn_alpha): Make globally visible. Chose the register
4095 names based on info->flavour.
4096 * disassemble.c: Always return print_insn_alpha for the alpha.
4098 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4100 * d10v-dis.c (dis_long): Handle unknown opcodes.
4102 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4104 * d10v-opc.c: Changes to support signed and unsigned numbers.
4105 All instructions with the same name that have long and short forms
4106 now end in ".l" or ".s". Divs added.
4107 * d10v-dis.c: Changes to support signed and unsigned numbers.
4109 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4111 * d10v-dis.c: Change all functions to use info->print_address_func.
4113 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4115 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
4116 move ccr/sr insns more strict so that the disassembler only
4117 selects them when the addressing mode is data register.
4119 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4120 * d10v-opc.c (pre_defined_registers): Declare.
4121 * d10v-dis.c (print_operand): Now uses pre_defined_registers
4122 to pick a better name for the registers.
4124 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
4126 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
4127 operands for fexpand and fpmerge. From Christian Kuehnke
4128 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
4130 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
4132 * alpha-dis.c (print_insn_alpha): No longer the user-visible
4133 print routine. Take new regnames and cpumask arguments.
4134 Kill the environment variable nonsense.
4135 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
4136 (print_insn_alpha_vms): New function. Do VMS style regnames.
4137 * disassemble.c (disassembler): Test bfd flavour to pick
4138 between OSF and VMS routines. Default to OSF.
4140 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
4142 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
4143 * configure: Rebuild.
4144 * Makefile.in (install): Use @INSTALL_SHLIB@.
4146 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4148 * configure: (bfd_d10v_arch) Add new case.
4149 * configure.in: (bfd_d10v_arch) Add new case.
4150 * d10v-dis.c: New file.
4151 * d10v-opc.c: New file.
4152 * disassemble.c (disassembler) Add entry for d10v.
4154 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
4156 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
4157 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
4159 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
4161 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
4162 distinguish between variants of the instruction set.
4163 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
4164 distinguish between variants of the instruction set.
4166 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
4168 * i386-dis.c (print_insn_i8086): New routine to disassemble using
4169 the 8086 instruction set.
4170 * i386-dis.c: General cleanups. Make most things static. Add
4171 prototypes. Get rid of static variables aflags and dflags. Pass
4172 them as args (to almost everything).
4174 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
4176 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
4178 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
4180 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
4181 if the next arg is marked with SRC_IN_DST. Gross.
4183 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
4184 we're looking for and find EXR.
4186 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
4187 if we're looking for KBIT and we don't find it.
4189 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
4192 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
4193 3bit immediate operands.
4195 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
4197 * Released binutils 2.7.
4199 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
4200 <kkaempf@progis.ac-net.de>.
4202 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
4204 * alpha-opc.c: Correct second case of "mov" to use OPRL.
4206 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
4208 * sparc-dis.c (print_insn_sparclite): New routine to print
4209 sparclite instructions.
4211 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
4213 * m68k-opc.c (m68k_opcodes): Add coldfire support.
4215 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
4217 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
4218 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
4219 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
4221 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
4223 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
4224 Use autoconf-set values.
4225 (docdir, oldincludedir): Removed.
4226 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
4228 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
4230 * alpha-opc.c: New file.
4231 * alpha-opc.h: Remove.
4232 * alpha-dis.c: Complete rewrite to use new opcode table.
4233 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
4234 * configure: Rebuild with autoconf 2.10.
4235 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
4236 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
4238 (alpha-opc.o): New target.
4240 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
4242 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
4243 Set imm_added_to_rs1 even if the source and destination register
4246 * sparc-opc.c: Add some two operand forms of the wr instruction.
4248 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
4250 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
4253 * disassemble.c (disassembler): Handle H8/S.
4254 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
4256 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
4258 * sparc-opc.c: Add beq/teq as aliases for be/te.
4260 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
4261 <sergei@msil.sps.mot.com>.
4263 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
4265 * makefile.vms: New file.
4267 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
4269 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
4271 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
4274 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
4276 * i386-dis.c (OP_OFF): Call append_prefix.
4278 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4280 * ppc-opc.c (instruction encoding macros): Add explicit casts to
4281 unsigned long to silence a warning from the Solaris PowerPC
4284 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
4286 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
4288 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
4290 * sparc-dis.c (X_IMM,X_SIMM): New macros.
4292 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
4293 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
4294 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
4295 cpush, cpusha, cpull sparclet insns.
4297 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
4299 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
4301 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
4303 * sparc-opc.c: Set F_FBR on floating point branch instructions.
4304 Set F_FLOAT on other floating point instructions.
4306 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4308 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
4310 (powerpc_opcodes): Add 860/821 specific SPRs.
4312 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
4314 * configure.in: Permit --enable-shared to specify a list of
4315 directories. Set and substitute BFD_PICLIST.
4316 * configure: Rebuild.
4317 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
4318 uses. Set to @BFD_PICLIST@.
4320 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
4322 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
4323 not "abs", which may be needed for the absolute in something
4324 like btst #0,@10:8. Print L_3 immediates separately from other
4325 immediates. Change ABSMOV reference to ABS8MEM.
4327 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
4329 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4330 (current_arch_mask): New static global.
4331 (compute_arch_mask): New static function.
4332 (print_insn_sparc): Delete sparc_v9_p. New static local
4333 current_mach. Resort opcode table if current_mach changes.
4334 Generalize "insn not supported" test.
4335 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4336 Delete test for v9/!v9.
4337 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4339 (brfc): Split into CBR and FBR for coprocessor/fp branches.
4340 (brfcx): Renamed to FBRX.
4341 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
4342 coprocessor mnemonics are not supported on the sparclet).
4343 (condf): Renamed to CONDF.
4344 (SLCBCC2): Delete F_ALIAS flag.
4346 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
4348 * sparc-opc.c (sparc_opcodes): rd must be 0 for
4349 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
4351 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
4353 * Makefile.in (config.status): Depend upon BFD VERSION file, so
4354 that the shared library version number is set correctly.
4356 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4358 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4359 Miles Bader <miles@gnu.ai.mit.edu>.
4360 * configure: Rebuild.
4362 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4364 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4367 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4369 * configure: Rebuild with autoconf 2.8.
4371 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4373 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4374 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4376 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4378 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4379 since they appear as targets in Makefile.in.
4380 * configure: Rebuild.
4382 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4384 * mpw-make.sed: Edit out shared library support bits.
4386 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4388 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4389 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4390 (sparc_opcodes): Add sparclet insns.
4391 (sparclet_cpreg_table): New static local.
4392 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4393 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4395 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4397 * i386-dis.c (index16): New static variable.
4398 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4400 (OP_indirE): Return result of OP_E.
4401 (OP_E): Check for 16 bit addressing mode, and disassemble
4402 correctly. Optimised 32 bit case a little. Don't print
4403 "(base,index,scale)" when sib specifies only an offset.
4405 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4407 * configure.in: Set and substitute SHLIB_DEP.
4408 * configure: Rebuild.
4409 * Makefile.in (SHLIB_DEP): New variable.
4410 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4411 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4412 COMMON_SHLIB, add them to piclist with appropriate modifications.
4413 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4414 here: just use piclist.
4416 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4418 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4419 (print_insn_sparc): Rewrite v9/not-v9 tests.
4420 (compare_opcodes): Likewise.
4421 * sparc-opc.c (MASK_<ARCH>): Define.
4422 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4423 (sparclet,v6notv9): Define.
4424 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4425 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4427 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4429 * configure.in: Call AC_PROG_CC before configure.host.
4430 * configure: Rebuild.
4432 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4434 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4436 * i386-dis.c (onebyte_has_modrm): New static array.
4437 (twobyte_has_modrm): New static array.
4438 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4440 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4442 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4445 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4447 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4450 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4452 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4453 m68010up, not just m68020up | cpu32.
4455 * Makefile.in (SONAME): New variable.
4456 ($(SHLINK)): Make a link to the transformed name, as well.
4457 (stamp-tshlink): New target.
4458 (install): Skip stamp-tshlink during install.
4460 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4462 * configure.in: Call AC_ARG_PROGRAM.
4463 * configure: Rebuild.
4464 * Makefile.in (program_transform_name): New variable.
4465 (install): Transform library name before installing it.
4467 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4469 * i960-dis.c (mem): Add HX dcinva instruction.
4471 Support for building as a shared library, based on patches from
4472 Alan Modra <alan@spri.levels.unisa.edu.au>:
4473 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4474 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4475 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4476 * configure: Rebuild.
4477 * Makefile.in (ALLLIBS): New variable.
4478 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4479 (COMMON_SHLIB, SHLINK): New variables.
4480 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4481 (STAGESTUFF): Remove variable.
4482 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4483 (stamp-piclist, piclist): New targets.
4484 ($(SHLIB), $(SHLINK)): New targets.
4485 ($(OFILES)): Depend upon stamp-picdir.
4486 (disassemble.o): Build twice if PICFLAG is set.
4487 (MOSTLYCLEAN): Add pic/*.o.
4488 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4489 (distclean): Remove pic and stamp-picdir.
4490 (install): Install shared libraries.
4491 (stamp-picdir): New target.
4493 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4495 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4496 Print unknown instruction as "unknown", rather than in hex.
4498 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4500 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4502 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4504 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4506 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4508 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4509 when necessary. From Ulrich Drepper
4510 <drepper@myware.rz.uni-karlsruhe.de>.
4512 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4514 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4515 sparc_num_opcodes. Update architecture enum values.
4516 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4517 (sparc_opcode_lookup_arch): New function.
4518 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4519 (sparc_opcodes): Add v9a shutdown insn.
4521 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4523 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4524 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4526 (print_insn_sparc64): Deleted.
4527 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4530 * sparc-opc.c (architecture_pname): Add v9a.
4532 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4534 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4535 incorrectly defined as 0x16 when it should be 0x15.
4536 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4537 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4538 excb (exception barrier) which is defined in the Alpha
4539 Architecture Handbook version 2.
4540 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4541 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4542 disassembled as or, for example.
4544 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4546 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4547 (_print_insn_mips): Change i from int to unsigned int.
4549 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4551 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4552 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4554 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4556 * i386-dis.c: Added Pentium Pro instructions.
4558 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4560 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4563 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4565 * sh-opc.h (sh_nibble_type): Added REG_B.
4566 (sh_arg_type): Added A_REG_B.
4567 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4569 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4571 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4573 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4575 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4577 * Makefile.in (distclean): Remove stamp-h. From Ronald
4578 F. Guilmette <rfg@monkeys.com>.
4580 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4582 From David Mosberger-Tang <davidm@azstarnet.com>:
4583 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4586 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4588 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4589 (sh_table): Added many SH3 opcodes.
4590 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4592 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4594 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4595 (subco,subco.): Mark this PPC, not PPCCOM.
4597 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4599 * configure: Rebuild with autoconf 2.7.
4601 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4603 * configure: Rebuild with autoconf 2.6.
4605 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4607 * configure.in: Sort list of architectures. Accept but do nothing
4608 for alliant, convex, pyramid, romp, and tahoe.
4610 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4612 * a29k-dis.c (print_special): Change num to unsigned int.
4614 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4616 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4619 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4621 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4622 * configure: Rebuilt.
4624 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4626 * configure.in: Add case for bfd_i860_arch.
4627 * configure: Rebuild.
4629 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4631 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4632 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4633 (NEXTDOUBLE): Likewise.
4634 (print_insn_m68k): Don't match fmoveml if there is more than one
4635 register in the list.
4636 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4638 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4640 * m68k-opc.c: Use #W rather than #w.
4641 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4643 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4645 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4646 and likewise for all the dbxx opcodes.
4648 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4650 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4652 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4654 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4655 the VR4100 specific instructions to the mips_opcodes structure.
4657 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4659 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4660 ugly Metrowerks bug in CW6, is fixed in CW7.
4662 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4664 * ppc-opc.c (whole file): Add flags for common/any support.
4666 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4668 * Makefile.in (BISON): Remove macro.
4669 (FLAGS_TO_PASS): Remove BISON.
4671 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4673 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4675 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4676 instructions that take no args by looking at the match mask.
4677 (print_insn_arg): Always print "%" before register names.
4678 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4679 [case '_']: Don't print "@#" before address.
4680 [case 'J']: Use "%s" as format string, not register name.
4681 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4683 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4685 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4688 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4690 From David Mosberger-Tang <davidm@azstarnet.com>
4692 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4693 (alpha_insn_set): added definitions for VAX floating point
4694 instructions (Unix compilers don't generate these, but handcoded
4695 assembly might still use them).
4697 * alpha-dis.c (print_insn_alpha): added support for disassembling
4698 the miscellaneous instructions in the Alpha instruction set.
4700 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4702 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4703 no longer create sysdep.h, sed ppc-opc.c to work around a
4704 serious Metrowerks C bug.
4705 * mpw-make.in: Remove.
4706 * mpw-make.sed: New file, used by mpw-configure to edit
4707 Makefile.in into an MPW makefile.
4709 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4711 * Makefile.in (maintainer-clean): New synonym for realclean.
4713 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4715 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4716 which use '0', '1', and '2' instead. Specify the proper size for
4717 a pmove immediate operand. Correct the pmovefd patterns to be
4718 moves to a register, not from a register.
4719 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4721 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4723 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4724 %psr, %wim, %tbr as F_NOTV9.
4726 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4728 * Makefile.in (Makefile): Just rebuild Makefile when running
4730 (config.h, stamp-h): New targets.
4731 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4732 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4733 rebuilding config.h.
4734 * configure: Rebuild.
4736 * mips-opc.c: Change unaligned loads and stores with "t,A"
4737 operands to use "t,A(b)".
4739 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4741 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4743 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4745 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4746 until 3 instead of until 2.
4748 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4750 * Makefile.in (ALL_CFLAGS): Define.
4751 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4752 (MOSTLYCLEAN): Add config.log.
4753 (distclean): Don't remove config.log.
4754 * configure.in: Substitute HDEFINES.
4755 * configure: Rebuild.
4757 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4759 * sh-opc.h (sh_arg_type): Add F_FR0.
4760 (sh_table, case fmac): Add F_FR0 as first argument.
4762 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4764 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4766 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4768 * sparc-dis.c: Remove all references to NO_V9.
4770 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4772 * aclocal.m4: Just include ../bfd/aclocal.m4.
4773 * configure: Rebuild.
4775 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4777 * sparc-dis.c (X_DISP19): Define.
4778 (print_insn, case 'G'): Use it.
4779 (print_insn, case 'L'): Sign extend displacement.
4781 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4783 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4784 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4785 host_makefile_frag or frags.
4786 * aclocal.m4: New file.
4787 * configure: Rebuild.
4788 * Makefile.in (INSTALL): Set to @INSTALL@.
4789 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4790 (INSTALL_DATA): Set to @INSTALL_DATA@.
4792 (AR_FLAGS): Set to rc rather than qc.
4793 (CC): Define as @CC@.
4794 (CFLAGS): Set to @CFLAGS@.
4795 (@host_makefile_frag@): Remove.
4796 (config.status): Remove dependency upon @frags@.
4798 * configure.in: ../bfd/config.bfd now just sets shell variables.
4799 Use them rather than looking through target Makefile fragments.
4800 * configure: Rebuild.
4802 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4804 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4806 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4808 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4809 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4812 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4813 (lookup_{name,value}): New functions.
4814 (prefetch_table): New static local.
4815 (sparc_{encode,decode}_prefetch): New functions.
4816 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4818 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4820 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4823 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4825 * sh-dis.c: Correct comment on first line of file.
4827 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4829 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4831 * sparc-opc.c (asi, membar): New static locals.
4832 (sparc_{encode,decode}_{asi,membar}): New functions.
4833 (sparc_opcodes, membar insn): Fix.
4834 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4835 Support decoding of membar masks.
4838 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4840 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4842 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4844 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4845 and likewise for the other branches. Add bhs as an alias for bcc,
4846 and likewise for the size variants. Add dbhs as an alias for
4849 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4851 * sh-opc.h (FP sts instructions): Update to match reality.
4853 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4855 * m68k-dis.c: (fpcr_names): Add % before all register names.
4856 (reg_names): Likewise.
4857 (print_insn_arg): Don't explicitly print % before register names.
4858 Add % before register names in static array names. In case 'r',
4859 print data registers as `@(Dn)', not `Dn@'. When printing a
4860 memory address, don't print @# before it.
4861 (print_indexed): Change base_disp and outer_disp from int to
4862 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4863 syntax. Sign extend 8 byte displacement correctly.
4864 (print_base): Print using MIT syntax. Print zpc when appropriate.
4865 Change parameter disp from int to bfd_vma.
4867 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4870 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4872 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4873 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4874 * sh-opc.h (sh_arg_type): Add new operand types.
4875 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4877 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4879 * Makefile.in (distclean): Remove generated file config.h.
4881 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4883 * Makefile.in (distclean): Remove generated file config.h.
4885 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4887 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4889 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4891 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4892 rather than numopcodes. Use m68k_opcodes rather than removed
4893 opcode function. Don't check F_ALIAS.
4894 (print_insn_arg): Change first parameter to be const char *.
4895 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4896 (m68k-opc.o): New target.
4897 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4898 * configure: Rebuild.
4900 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4902 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4903 (opcode_bits, opcode_hash_table): New variables.
4904 (opcodes_initialized): Renamed from opcodes_sorted.
4905 (build_hash_table): New function.
4906 (is_delayed_branch): Use hash table.
4907 (print_insn): Renamed from print_insn_sparc, made static.
4908 Build and use hash table. If !sparc64, ignore sparc64 insns,
4909 and vice-versa if sparc64.
4910 (print_insn_sparc, print_insn_sparc64): New functions.
4911 (compare_opcodes): Move sparc64 opcodes to end.
4912 Print commutative insns with constant second.
4913 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4915 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4917 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4918 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4919 avoids printing a delay slot in a delay slot.
4920 * sh-opc.h (sh_table): Fully bracket last entry.
4922 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4924 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4926 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4928 * configure.in: Get host_makefile_frag from ${srcdir}.
4930 * configure.in: Autoconfiscated. Check for string[s].h. Create
4931 config.h from config.in. Don't set up sysdep.h link.
4932 * sysdep.h: New file.
4933 * configure, config.in: New files, generated from configure.in.
4934 * Makefile.in: Updated to be processed autoconf-style.
4935 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4936 (Makefile): Depend on config.status.
4937 (config.status): New rule.
4938 * configure.bat: Update Makefile substitutions.
4940 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4942 * mips-opc.c (L1): Define.
4943 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4944 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4947 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4949 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4950 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4951 have multiple add units but only a single logical unit.
4953 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4954 shifted by 18, without any insertion or extraction function.
4955 (insert_cr, extract_cr): Remove.
4957 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4959 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4962 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4964 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4965 * sh-opc.h: Add copyright.
4967 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4969 * Makefile.in (crunch-m68k): Delete extra target accidentally
4970 checked in a while ago.
4972 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4974 * sh-opc.h (sh_table): Add SH3 support.
4976 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4978 * sh-opc.h: Added bsrf and braf.
4980 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4982 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4983 bogus [ls]fm{ea,fd} patterns.
4985 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4986 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4987 initialize it from memory. Make function static.
4988 (print_insn_{big,little}_arm): New functions.
4989 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4990 the correct endianness.
4992 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4994 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4997 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4999 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
5000 17th, so that it builds again using GCC as the compiler.
5002 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
5004 * mips-dis.c (print_insn_little_mips): Cast return value from
5005 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
5006 expects an unsigned long, and that might be fewer words of
5007 argument storage (e.g., if bfd_vma is long long on a 32-bit
5009 (print_insn_big_mips): Likewise with bfd_getb32 value.
5010 (_print_insn_mips): Now static.
5012 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
5014 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
5015 gcc memory hog problem with initializer is fixed.
5017 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
5019 Merge in support for Mac MPW as a host.
5020 (Old change descriptions retained for informational value.)
5022 * mpw-config.in (archname): Compute from the config.
5023 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
5025 * mpw-config.in (target_arch): Compute from canonical target.
5026 (m68k, mips, powerpc, sparc): Add architectures.
5027 * mpw-make.in (disassemble.c.o): Add.
5028 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
5030 * mpw-config.in (BFD_MACHINES): Set to a default value.
5031 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
5033 * mpw-make.in (CSEARCH): Add extra-include to search path.
5035 * mpw-config.in (varargs.h): Don't create.
5036 (sysdep.h): Create using forward-include.
5037 * mpw-make.in (CSEARCH): Add include/mpw to search path.
5039 * mpw-config.in: New file, MPW version of configure.in.
5040 * mpw-make.in: New file, MPW version of Makefile.in.
5042 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
5044 * alpha-dis.c (print_insn_alpha): Put empty statement after
5047 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
5049 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
5050 (low_sign_extend): Likewise.
5051 (get_field): Delete unused function.
5052 (set_field, deposit_14, deposit_21): Likewise.
5054 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
5056 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
5059 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
5061 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
5063 * alpha-opc.h (OSF_ASMCODE): define
5064 print pal-code names as defined in App C of the
5065 Alpha Architecture Reference Manual
5067 * alpha-dis.c: cleaned up output
5068 print stylized code forms as defined in App A.4.3 of the
5069 Alpha Architecture Reference Manual
5071 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
5073 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
5075 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
5078 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
5080 * m68k-dis.c (opcode): New function. Returns address of opcode
5081 table entry given index, even if the opcode table was split to
5082 work around gcc bugs.
5083 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
5085 (BREAK_UP_BIG_DECL): Make secondary array static and const.
5086 (reg_names): Now const.
5087 (print_insn_arg): Arrays cacheFieldName and names now const.
5088 (print_indexed): Array scales now const.
5090 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
5092 * ppc-opc.c: Sort recently added instructions by minor opcode
5093 number within major opcode number.
5095 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
5097 * hppa-dis.c: Include libhppa.h.
5099 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
5101 * mips-opc.c: Change dli to use M_DLI, and add dla.
5103 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5105 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
5107 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
5109 * mips-opc.c: Add r4650 mul instruction.
5111 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
5113 * mips-opc.c: Add uld and usd macros for unaligned double load and
5116 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
5118 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
5119 mfdcr, mtdcr, icbt, iccci.
5121 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
5123 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
5124 signed char fields to shorts, more portable.
5126 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
5128 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
5129 char fields as signed chars, since they may have negative values.
5131 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
5133 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
5134 (mycroft@netbsd.org).
5136 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
5138 From "Logg, Ed" <elogg@ea.com>:
5139 * ppc-opc.c (extract_bdm): Correct parenthezisation.
5140 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
5143 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
5145 * ppc-opc.c: Changes based on patch from David Edelsohn
5146 <edelsohn@mhpcc.edu>.
5147 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
5150 (insert_tbr): New static function.
5151 (extract_tbr): New static function.
5152 (XFXFXM_MASK, XFXM): Define.
5153 (XSPRBAT_MASK, XSPRG_MASK): Define.
5154 (powerpc_opcodes): Add instructions to access special registers by
5155 name. Add mtcr and mftbu.
5157 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
5159 * mips-opc.c (P3): Define.
5160 (mips_opcodes): Add mad and madu.
5162 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
5164 * configure.in: Add W65 support.
5165 * disassemble.c: Likewise.
5166 * w65-opc.h, w65-dis.c: New files.
5168 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
5170 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
5173 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5175 * mips-opc.c: Add dli as a synonym for li.
5177 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
5179 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
5180 print something for reserved opcode values, even if it won't
5183 * mips-dis.c (_print_insn_mips): When initializing, shift right
5184 and mask, to avoid sign extension problems on the Alpha.
5186 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
5189 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
5191 * sh-opc.h (mov.l gbr): Get direction right.
5192 * sh-dis.c (print_insn_shx): New function.
5193 (print_insn_shl, print_insn_sh): Call print_insn_shx to
5194 print opcodes with right byte order.
5196 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
5198 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
5199 to avoid conflicts with getopt.
5201 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5203 * hppa-dis.c (print_insn_hppa): Read the instruction using
5204 bfd_getb32, so that it works on a little endian or 64 bit host.
5205 Remove unused local variable op.
5207 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5209 * mips-opc.c: Use or instead of addu for pseudo-op move, since
5210 addu does not work correctly if -mips3.
5212 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5214 * a29k-dis.c (print_special): Add special register names defined
5215 on 29030, 29040 and 29050.
5216 (print_insn): Handle new operand type 'I'.
5218 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5220 * Makefile.in (INSTALL): Use top level install.sh script.
5222 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5224 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
5225 that it works on a little endian host.
5227 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5229 * configure.in: Use ${config_shell} when running config.bfd.
5231 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5233 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
5235 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5237 * a29k-dis.c (print_insn): Print the opcode.
5239 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5241 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
5243 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
5245 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
5247 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5249 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
5250 which store a value into memory.
5252 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
5254 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
5255 * arm-dis.c, arm-opc.h: New files.
5257 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
5259 * Makefile.in (ns32k-dis.o): Add dependency.
5260 * ns32k-dis.c (print_insn_arg): Declare initialized local as
5261 string, not as array of chars.
5263 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5265 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
5267 * sparc-opc.c: Added sparclite extended FP operations, and
5268 versions of v9 impdep* instructions permitting specification of
5271 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5273 * i960-dis.c (reg_names): Now const.
5274 (struct sparse_tabent): New type, copied from array type in mem
5276 (ctrl): Local static array ctrl_tab now const.
5277 (cobr): Local static array cobr_tab now const.
5278 (mem): Local variables reg1, reg2, reg3 now point to const. Local
5279 static variable mem_tab no longer explicitly initialized. Changed
5280 mem_init to const array of struct sparse_tabent.
5281 (reg): Local static variable reg_tab no longer explicitly
5282 initialized. Changed reg_init to const array of struct
5284 (ea): Local static array scale_tab now const.
5286 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
5289 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
5291 * configure.bat: the disassember needs to be enabled for
5292 "objdump -d" to work in djgpp.
5294 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5296 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
5297 (invalid_float): Enabled general version, doesn't require running
5298 on ns32k host. Changed to take char* argument, and test for
5299 explicitly specified sizes, instead of using sizeof() on host CPU
5301 (INVALID_FLOAT): Cast first argument.
5302 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
5303 list_P032, list_M032): Now const.
5304 (optlist, list_search): Made appropriate arguments now point to
5306 (print_insn_arg): Changed static array of one-character-string
5307 pointers into a static const array of characters; fixed sprintf
5308 statement accordingly.
5310 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
5312 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
5313 from distribution. A ns32k-dis.c from a previous distribution has
5314 been brought up to date and supports the new interface.
5316 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
5318 * configure.in: add bfd_ns32k_arch target support.
5320 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
5321 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
5323 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
5325 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
5328 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
5330 * h8300-dis.c, mips-dis.c: Don't use true and false.
5332 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
5334 * configure.in: Change --with-targets to --enable-targets.
5336 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5338 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5339 opcodes to the first instruction with that opcode, to speed
5340 disassembly of large files. From ralphc@pyramid.com (Ralph
5343 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5345 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5347 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
5349 * configure.bat: update to latest makefile.in
5351 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
5353 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5354 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5355 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5356 slot insn is in a delay slot.
5357 * z8k-opc.h: (resflg): Fix patterns.
5358 * h8500-opc.h Fix CR insn patterns.
5360 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5362 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5363 "cmpl" before POWER versions, so that gas -many uses them.
5365 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5367 * disassemble.c: New file.
5368 * Makefile.in (OFILES): Add disassemble.o.
5369 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5370 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5371 binutils/configure.in.
5373 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5374 opcode being examined.
5376 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5378 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5379 (insert_ral, insert_ram, insert_ras): New functions.
5380 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5381 RAS for store with update.
5383 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5385 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5386 (edelsohn@npac.syr.edu).
5388 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5390 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5393 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5395 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5397 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5399 * ppc-opc.c (powerpc_operands): The signedp field has been
5400 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5401 instead. Add new operand SISIGNOPT.
5402 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5403 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5404 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5407 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5409 * i386-dis.c (struct private): Renamed to dis_private. `private'
5410 is a reserved word for dynix cc.
5412 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5414 * configure.in: Change error message to refer to bfd/config.bfd
5415 rather than bfd/configure.in.
5417 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5419 * ppc-opc.c: Define POWER2 as short alias flag.
5420 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5423 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5425 * i960-dis.c (print_insn_i960): Don't read a second word for
5426 opcodes 0, 1, 2 and 3.
5428 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5430 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5432 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5434 * m68881-ext.c: Removed; no longer used.
5435 * Makefile.in: Changed accordingly.
5437 * m68k-dis.c (ext_format_68881): Don't declare.
5438 (print_insn_m68k): If an instruction uses place 'i', it uses at
5439 least four fixed bytes.
5440 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5441 extended float, convert to double using floatformat_to_double, not
5442 ieee_extended_to_double, and fetch the data before converting it.
5444 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5446 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5447 davidj@ICSI.Berkeley.EDU (David Johnson).
5449 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5451 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5452 PowerPC uses bdnz[l][a].
5454 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5456 * dis-buf.c, i386-dis.c: Include sysdep.h.
5458 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5460 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5462 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5463 by Motorola PowerPC 601 with PPC_OPCODE_601.
5464 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5465 Disassemble Motorola PowerPC 601 instructions as well as normal
5466 PowerPC instructions.
5468 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5470 * i960-dis.c (reg, mem): Just use a static array instead of
5473 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5475 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5476 condition name index if this is for a negated condition.
5478 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5479 Floating point format for 'H' operand is backwards from normal
5480 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5481 operands (fmpyadd and fmpysub), handle bizarre register
5482 translation correctly for single precision format.
5484 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5485 or 'I' operands if the next format specifier is 'M' (fcmp
5486 condition completer).
5488 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5490 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5491 single number giving a bitmask for the MB and ME fields of an M
5492 form instruction. Change NB to accept 32, and turn it into 0;
5493 also turn 0 into 32 when disassembling. Seperated SH from NB.
5494 (insert_mbe, extract_mbe): New functions.
5495 (insert_nb, extract_nb): New functions.
5496 (SC_MASK): Mask out SA and LK bits.
5497 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5498 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5499 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5500 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5501 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5502 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5503 (powerpc_macros): Define table of macro definitions.
5504 (powerpc_num_macros): Define.
5506 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5507 if PPC_OPERAND_NEXT is set.
5509 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5511 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5512 char. Retrieve contents using bfd_getl32 instead of shifting.
5514 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5516 * ppc-opc.c: New file. Opcode table for PowerPC, including
5517 opcodes for POWER (RS/6000).
5518 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5519 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5520 (CFILES): Add ppc-dis.c.
5521 (ppc-dis.o, ppc-opc.o): New targets.
5522 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5524 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5526 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5527 No space before 'u', 'f', or 'N'.
5529 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5531 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5532 farther than we should.
5534 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5536 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5538 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5540 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5542 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5543 needs it, to prevent reading past the end of a section.
5545 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5547 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5548 Removed t,A case for la; always use t,A(b) case.
5550 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5552 From Ted Lemen <mellon@pepper.ncd.com>
5553 * mips-dis.c (print_insn_arg): Handle 'k'.
5554 * mips-opc.c: Make cache use k, not t.
5556 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5558 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5559 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5560 FLOAT_FORMAT_CODE to put out floating point register names.
5562 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5564 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5566 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5568 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5570 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5572 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5573 larger than 32. Moved dsxx32 variants first for disassembler.
5575 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5577 * z8kgen.c, z8k-opc.h: Add full lda information.
5579 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5581 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5582 movb instructions. Any necessary space will be emitted by
5583 the code to handle nullification completers.
5585 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5587 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5589 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5591 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5592 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5594 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5596 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5598 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5600 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5601 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5603 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5605 * m88k-dis.c (m88kdis): comment change. Remove space after
5607 (printop): handle new arg types DEC and XREG for m88110.
5609 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5611 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5612 type for absolute branch addresses. Delete special
5613 "ble" and "be" code in 'W' operand code.
5615 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5617 * mips-opc.c: Set hazard information correctly for branch
5618 likely instructions.
5620 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5622 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5623 info->fprintf_func for printing and info->print_address_func for
5626 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5628 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5630 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5632 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5633 Corrected second case of "b" for disassembler.
5635 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5637 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5638 to BFD swapping routines to correspond to BFD name changes.
5640 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5642 * mips-opc.c: Change div machine instruction to be z,s,t rather
5643 than s,t. Change div macro to be d,v,t rather than d,s,t.
5644 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5645 rem and remu which generates only the corresponding div
5646 instruction. This is for compatibility with the MIPS assembler,
5647 which only generates the simple machine instruction when an
5648 explicit destination of $0 is used.
5649 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5651 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5653 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5654 WR_31 hazard for bal, bgezal, bltzal.
5656 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5658 * hppa-dis.c (print_insn_hppa): Use print function
5659 from within the disassemble_info, not fprintf_filtered.
5661 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5663 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5664 Law, law@cs.utah.edu.)
5666 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5668 * mips-opc.c ("absu"): Removed.
5671 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5673 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5674 Changed hazard information to distinguish between memory load
5675 delays and coprocessor load delays.
5677 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5679 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5681 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5683 * configure.in: Don't pass cpu to config.bfd.
5685 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5687 * m88k-dis.c (m88kdis): Make class unsigned.
5689 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5691 * alpha-dis.c (print_insn_alpha): One branch format case was
5692 missing the instruction name.
5694 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5696 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5697 Add the arch-specific auxiliary files.
5698 (OFILES): Remove the arch-specific auxiliary files
5699 and use BFD_MACHINES instead of DIS_LIBS.
5700 * configure.in: Set BFD_MACHINES based on --with-targets option.
5702 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5704 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5707 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5709 * sparc-opc.c: Change CONST to const to deal with gcc
5710 -Dconst=__const -traditional.
5712 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5714 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5715 coprocessor instructions out of #if 0, and made them use new
5718 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5720 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5722 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5724 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5725 instruction, for use by the disassembler.
5727 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5728 hand-coded sign extensions that depended on 32-bit host ints.
5729 FIXME, we still depend on big-endian host bitfield ordering.
5730 (sparc_print_insn): Set the insn_info_valid field, and the
5731 other fields that describe the instruction being printed.
5733 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5735 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5736 `jmp' instead of just one of them.
5738 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5740 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5741 (fput_fp_reg_r): Renamed from fput_reg_r.
5742 (fput_fp_reg): New function.
5743 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5745 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5747 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5749 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5751 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5753 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5754 don't output a space.
5756 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5758 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5760 * mips-opc.c: New file, containing opcode table from
5761 ../include/opcode/mips.h.
5762 * Makefile.in: Add it.
5764 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5766 * m88k-dis.c: New file, moved in from gdb and changed to use the
5767 new dis-asm.h disassembler interface.
5768 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5769 (m88k-dis.o): New target.
5771 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5773 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5774 argument string const char * to correspond to opcode/mips.h.
5776 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5778 * mips-dis.c: Updated to account for name changes in new version
5780 * Makefile.in: Added header file dependencies.
5782 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5784 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5786 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5788 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5789 extend, rather than shifts.
5791 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5793 * Makefile.in: Undo 15 June change.
5795 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5797 * m68k-dis.c (print_insn_arg): Change return value to byte count
5799 * m68k-dis.c: Re-write to detect invalid operands before
5800 printing anything, so we can handle this the same way we
5801 handle invalid opcodes.
5803 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5805 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5807 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5809 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5812 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5814 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5816 * configure.in: Do make sysdep.h link.
5817 * Makefile.in: Search ../include. Don't search ../bfd.
5819 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5821 Changes from Jeff Law, law@cs.utah.edu:
5822 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5823 Do not print a space before the completers specified by
5826 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5828 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5829 defined, since gdb has been fixed.
5831 Changes from Jeff Law, law@cs.utah.edu:
5832 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5833 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5834 be a *disassemble_info, not a *FILE.
5835 * hppa-dis.c: Support 'd', '!', and 'a'.
5836 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5837 * hppa-dis.c: Delete cases which are no longer needed.
5839 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5841 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5843 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5845 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5848 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5850 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5851 * configure.in: No longer need to configure to get sysdep.h.
5853 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5855 * Patches from Jeffrey Law <law@cs.utah.edu>.
5856 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5857 templates for 1.1 FP computational instructions.
5859 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5861 * h8500-dis.c (print_insn_h8500): Address argument is type
5863 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5866 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5867 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5869 * sparc-dis.c (compare_opcodes): Move static declaration to
5872 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5874 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5875 instruction, remove unimp hack from 'l' argument.
5877 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5879 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5882 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5884 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5885 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5888 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5890 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5891 arrays of string pointers to 2-d arrays of chars, to save
5894 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5896 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5897 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5899 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5901 * hppa-dis.c: New file from Utah, adapted to new disassembler
5903 * Makefile.in: Include it.
5905 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5907 * sh-dis.c, sh-opc.h: New files.
5909 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5911 * alpha-dis.c, alpha-opc.h: New files.
5913 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5915 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5918 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5920 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5922 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5924 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5927 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5929 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5930 and double percent signs a few places.
5932 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5934 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5935 Use info->print_address_func not print_address.
5937 * dis-buf.c (generic_print_address): New function.
5939 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5941 * Makefile.in: Add sparc-dis.c.
5942 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5944 Add `add' instruction to the set that get checked
5945 for a preceding `sethi' in order to print an absolute address.
5946 * (print_insn): Disassembly prefers real instructions.
5947 (is_delayed_branch): Speed up.
5948 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5949 Still missing some float ops, and needs testing.
5950 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5951 F_ALIAS. Use printf, not fprintf, when not passing a file
5953 (compare_opcodes): Check that identical instructions have
5954 identical opcodes, complain otherwise.
5957 * Include reg_names.
5959 Use dis-asm.h/read_memory_func interface.
5961 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5963 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5964 deliberately return non-zero to setjmp from longjmp. Otherwise
5965 this code fails to compile.
5967 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5969 * m68k-dis.c: Fix prototype for fetch_arg().
5971 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5973 * dis-buf.c: New file, for new read_memory_func interface.
5974 Makefile.in (OFILES): Include it.
5975 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5976 Use new read_memory_func interface.
5978 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5980 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5981 * h8500-opc.h: Fix couple of opcodes.
5983 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5985 * Makefile.in: add dvi & installcheck targets
5987 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5989 * Makefile.in: Update for h8500-dis.c.
5991 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5993 * h8500-dis.c, h8500-opc.h: New files
5995 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5997 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5998 ../include/dis-asm.h.
5999 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
6000 and ../gdb/m68k-pinsn.c).
6001 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
6002 and ../gdb/i386-pinsn.c).
6003 * m68881-ext.c: New file. Moved definition of
6004 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
6005 * Makefile.in: Adjust for new files.
6006 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
6007 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
6008 can be dis-assembled.
6010 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
6012 * mips-dis.c (print_insn_arg): Now returns void.
6014 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
6016 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
6017 files that use the macros.
6019 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
6021 * mips-dis.c: New file, from gdb/mips-pinsn.c.
6022 * Makefile.in (DIS_LIBS): Added mips-dis.o.
6023 (CFILES): Added mips-dis.c.
6025 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
6027 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
6028 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
6030 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
6032 * Makefile.in: Improve *clean rules.
6033 * configure.in: Allow a default host.
6035 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6037 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
6038 files include other sysdep files
6040 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
6042 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
6044 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
6046 * configure.in: For host support, use ../bfd/configure.host
6047 so it stays in sync with the ../bfd/hosts database.
6049 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6051 * configure.in: use cpu-vendor-os triple instead of nested cases
6053 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
6055 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
6056 *always* the wrong one.
6058 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
6060 * z8kgen.c: added copyright info
6062 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
6064 * z8k-dis.c (unparse_instr): prettier tabs
6065 * z8kgen.c -> z8k-opc.h: bug fixes in tables
6067 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
6069 * configure.in: Add ncr* configuration.
6070 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
6071 picayune ANSI compilers happy.
6073 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
6075 * configure.in (i386): Make i386 and i486 synonymous for now.
6076 * configure.in (i[34]86-*-sysv4): Add my_host definition.
6078 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
6080 * Makefile.in (install): Fix typo.
6082 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
6084 * Makefile.in (make): Remove obsolete crud.
6085 (sparc-opc.o): Avoid Sun Make VPATH bug.
6087 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
6089 * Makefile.in: since there are no SUBDIRS, remove rule and
6090 references of subdir_do.
6092 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
6094 * Makefile.in (install): Get the library name right here too.
6095 Don't install bfd.h, since it's unrelated to this library. No
6096 subdirs to recurse into, either.
6097 (CFILES): The source file has a .c suffix, not .o.
6099 * sparc-opc.c: New file, moved from BFD.
6100 * Makefile.in (OFILES): Build it.
6102 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
6104 * z8k-dis.c: fixed forward refferences of some declarations.
6106 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
6108 * Makefile.in: get the name of the library right
6110 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
6112 * z8k-dis.c: knows how to disassemble z8k stuff
6113 * z8k-opc.h: new file full of z8000 opcodes
6117 version-control: never
projects / deliverable / binutils-gdb.git / blob