1 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
3 * po/da.po: Updated translation.
5 2002-02-12 Graydon Hoare <graydon@redhat.com>
7 * cgen-asm.in (parse_insn_normal): Change call from
8 @arch@_cgen_parse_operand to cd->parse_operand, to
9 facilitate CGEN_ASM_INIT_HOOK doing useful work.
11 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
13 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
16 2002-02-11 Alan Modra <amodra@bigpond.net.au>
18 * Makefile.am: "make dep-am".
19 * Makefile.in: Regenerate.
20 * aclocal.m4: Regenerate.
21 * config.in: Regenerate.
22 * configure: Regenerate.
24 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
26 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
27 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
29 * configure: Regenerate.
31 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
33 * cgen-dis.c: Add prototypes for count_decodable_bits
34 and add_insn_to_hash_chain.
36 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
38 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
41 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
43 * or32-opc.c: Fix compile time warning messages.
44 * or32-dis.c: Fix compile time warning messages.
46 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
49 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
50 * sh64-opc.c: Regenerate.
51 2001-03-13 DJ Delorie <dj@redhat.com>
52 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
53 purpose is more obvious.
54 * sh64-opc.c (shmedia_table): Ditto.
55 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
56 (print_insn_shmedia): Ditto.
57 2001-03-12 DJ Delorie <dj@redhat.com>
58 * sh64-opc.c: Adjust comments to reflect reality: replace bits
59 3:0 with zeros (not "reserved"), replace "rrrrrr" with
60 "gggggg" for two-operand floating point opcodes. Remove
62 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
63 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
64 Correct printing of .byte:s. Return number of printed bytes or
66 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
67 to next four-byte-alignment if insn or data is not aligned.
68 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
69 * sh64-dis.c: Update comments and fix comment formatting.
70 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
71 Abort instead of setting length to 0.
72 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
73 crange_bsearch_cmpl, sh64_get_contents_type,
74 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
75 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
76 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
77 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
78 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
79 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
80 address with same prefix as SHcompact.
81 In the disassembler, use a .cranges section for linked executables.
82 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
83 and update for using structure in info->private_data.
84 (struct sh64_disassemble_info): New.
85 (is_shmedia_p): Delete.
86 (crange_qsort_cmpb): New function.
87 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
88 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
89 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
90 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
91 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
92 pair. Display addresses for linked executables only.
93 (print_insn_sh64x_media): Initialize info->private_data by calling
94 init_sh64_disasm_info.
95 (print_insn_sh64x): Ditto. Find out type of contents by calling
96 sh64_contents_type_disasm. Display data regions using ".long" and
97 ".byte" similar to unrecognized opcodes.
98 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
99 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
100 information in section flags before considering symbols. Don't
101 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
102 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
103 matching $target $canon_targets instead of looking at the
104 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
105 * configure: Regenerate.
106 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
107 * sh64-opc.c (shmedia_creg_table): New.
108 * sh64-opc.h (shmedia_creg_info): New type.
109 (shmedia_creg_table): Declare.
110 * sh64-dis.c (creg_name): New function.
111 (print_insn_shmedia): Use it.
112 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
113 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
114 print_insn_sh64l if little-endian.
115 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
116 (print_insn_sh64l): New.
117 (print_insn_sh64x): New.
118 (print_insn_sh64x_media): New.
119 (print_insn_sh64): Break out code to print_insn_sh64x and
120 print_insn_sh64x_media.
121 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
122 * sh64-opc.h: New file
123 * sh64-opc.c: New file
124 * sh64-dis.c: New file
125 * Makefile.am: Add sh64 targets.
126 (HFILES): Add sh64-opc.h.
127 (CFILES): Add sh64-opc.c and sh64-dis.c.
128 (ALL_MACHINES): Add sh64 files.
129 * Makefile.in: Regenerate.
130 * configure.in: Add support for sh64 to bfd_sh_arch.
131 * configure: Regenerate.
132 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
133 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
135 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
136 * po/POTFILES.in: Regenerate.
137 * po/opcodes.pot: Regenerate.
139 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
141 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
143 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
145 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
147 2002-02-01 Alan Modra <amodra@bigpond.net.au>
149 * Makefile.am: Run "make dep-am"
150 * Makefile.in: Regenerate.
152 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
154 * or32-dis.c: New file.
155 * or32-opc.c: New file.
156 * configure.in: Add support for or32.
157 * configure: Regenerate.
158 * Makefile.am: Add support for or32.
159 * Makefile.in: Regenerate.
160 * disassemble.c: Add support for or32.
161 * po/POTFILES.in: Regenerate.
162 * po/opcodes.pot: Regenerate.
164 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
166 * configure: Regenerated.
168 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
170 * po/fr.po: Updated version.
172 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
174 * po/es.po: Updated version.
176 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
178 * po/da.po: New version.
180 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
182 * po/da.po: New file: Spanish translation.
183 * configure.in (ALL_LINGUAS): Add da.
184 * configure: Regenerate.
186 2002-01-22 Graydon Hoare <graydon@redhat.com>
188 * fr30-asm.c: Regenerate.
189 * fr30-desc.c: Likewise.
190 * fr30-desc.h: Likewise.
191 * fr30-dis.c: Likewise.
192 * fr30-ibld.c: Likewise.
193 * fr30-opc.c: Likewise.
194 * fr30-opc.h: Likewise.
195 * m32r-asm.c: Likewise.
196 * m32r-desc.c: Likewise.
197 * m32r-desc.h: Likewise.
198 * m32r-dis.c: Likewise.
199 * m32r-ibld.c: Likewise.
200 * m32r-opc.c: Likewise.
201 * m32r-opc.h: Likewise.
202 * m32r-opinst.c: Likewise.
203 * openrisc-asm.c: Likewise.
204 * openrisc-desc.c: Likewise.
205 * openrisc-desc.h: Likewise.
206 * openrisc-dis.c: Likewise.
207 * openrisc-ibld.c: Likewise.
208 * openrisc-opc.c: Likewise.
209 * openrisc-opc.h: Likewise.
210 * xstormy16-desc.c: Likewise.
212 2002-01-22 Richard Henderson <rth@redhat.com>
214 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
217 2002-01-22 Alan Modra <amodra@bigpond.net.au>
219 * Makefile.am: Run "make dep-am".
220 * Makefile.in: Regenerate.
221 * opcodes/po/POTFILES.in: Regenerate.
223 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
225 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
226 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
228 2002-01-18 Keith Walker <keith.walker@arm.com>
230 * arm-opc.h (arm_opcodes): Add bxj instruction.
232 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
234 * po/opcodes.pot: Regenerate.
235 * po/fr.po: Regenerate.
236 * po/sv.po: Regenerate.
237 * po/tr.po: Regenerate.
239 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
241 * po/tr.po: Import new version.
243 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
245 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
246 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
249 2002-01-10 matthew green <mrg@redhat.com>
251 * xstormy16-asm.c: Regenerate.
252 * xstormy16-desc.c: Likewise.
253 * xstormy16-desc.h: Likewise.
254 * xstormy16-dis.c: Likewise.
255 * xstormy16-opc.c: Likewise.
256 * xstormy16-opc.h: Likewise.
258 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
260 * po/es.po: New file: Spanish translation.
261 * configure.in (ALL_LINGUAS): Add es.
262 * configure: Regenerate.
264 2001-12-31 Jeffrey A Law (law@redhat.com)
266 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
267 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
268 Always emit a space after 'H'.
270 2001-12-18 matthew green <mrg@redhat.com>
272 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
274 2001-12-17 Richard Henderson <rth@redhat.com>
276 * alpha-opc.c (unop): Encode with RB as $sp.
278 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
280 * Makefile.am: Add support for xstormy16.
281 * Makefile.in: Regenerate.
282 * configure.in: Add support for xstormy16.
283 * configure: Regenerate.
284 * disassemble.c: Add support for xstormy16.
285 * xstormy16-asm.c: New generated file.
286 * xstormy16-desc.c: New generated file.
287 * xstormy16-desc.h: New generated file.
288 * xstormy16-dis.c: New generated file.
289 * xstormy16-ibld.c: New generated file.
290 * xstormy16-opc.c: New generated file.
291 * xstormy16-opc.h: New generated file.
293 2001-12-06 Richard Henderson <rth@redhat.com>
295 * alpha-opc.c (alpha_opcodes): Add wh64en.
297 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
299 * d10v-opc.c (d10v_predefined_registers): Remove warnings
300 introduced in Nov 29's patch.
302 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
305 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
308 * d10v-opc.c (RSRC_NOSP): New macro.
309 (d10v_operands): Add it.
310 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
312 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
314 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
315 (RSRC_SP): New macro.
316 (d10v_operands): Add it.
317 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
319 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
321 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
322 Also, break out of the loop as soon as an instruction has been
325 2001-11-17 matthew green <mrg@redhat.com>
327 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
329 2001-11-15 Alan Modra <amodra@bigpond.net.au>
331 * po/POTFILES.in: Regenerate.
333 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
334 (insert_bat, extract_bat, insert_bba, extract_bba,
335 insert_bd, extract_bd, insert_bdm, extract_bdm,
336 insert_bdp, extract_bdp, valid_bo,
337 insert_bo, extract_bo, insert_boe, extract_boe,
338 insert_ds, extract_ds, insert_de, extract_de,
339 insert_des, extract_des, insert_li, extract_li,
340 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
341 insert_nb, extract_nb, insert_nsi, extract_nsi,
342 insert_ral, insert_ram, insert_ras,
343 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
344 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
345 (extract_bd, extract_bdm, extract_bdp,
346 extract_ds, extract_des,
347 extract_li, extract_nsi): Implement sign extension without conditional.
348 (insert_bdm, extract_bdm,
349 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
350 (extract_bdm, extract_bdp): Correct 32 bit validation.
351 (AT1_MASK, AT2_MASK): Define.
352 (BBOAT_MASK): Define.
353 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
354 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
355 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
356 (PPCCOM32, PPCCOM64): Define.
357 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
358 and add new patterns to implement 64 bit branches with hints. Move
359 booke instructions so they match before ppc64.
361 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
362 64 bit default targets, and parse "32" and "64" in options.
364 (print_insn_powerpc): Pass dialect to operand->extract.
366 2001-11-14 Dave Brolley <brolley@redhat.com>
368 * cgen-dis.c (count_decodable_bits): New function.
369 (add_insn_to_hash_chain): New function.
370 (hash_insn_array): Call add_insn_to_hash_chain.
371 (hash_insn_list): Call add_insn_to_hash_chain.
372 * m32r-dis.c: Regenerated.
373 * fr30-dis.c: Regenerated.
375 2001-11-14 Andreas Jaeger <aj@suse.de>
377 * i386-dis.c (print_insn): Use x86-64 as option.
379 2001-11-14 Alan Modra <amodra@bigpond.net.au>
381 * disassemble.c (disassembler): Call print_insn_i386.
382 * i386-dis.c (SUFFIX_ALWAYS): Define.
383 (struct dis_private): Add orig_sizeflag.
384 (print_insn_i386): Make it a wrapper, calling..
385 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
386 warning without using volatile by moving orig_sizeflag to priv,
387 and removing inbuf. Parse disassembler_options.
388 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
390 (putop): Remove #ifdef SUFFIX_ALWAYS.
392 2001-11-11 Timothy Wall <twall@alum.mit.edu>
394 * tic54x-dis.c: Use revised opcode structure. Export opcode
396 (has_lkaddr): Don't forget about Lmem insns.
397 * tic54x-opc.c: Add emulation trap. Parallel table now uses
398 standard opcode templates.
400 2001-11-13 Zack Weinberg <zack@codesourcery.com>
402 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
403 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
404 category instead of Ew.
406 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
408 * m68k-opc.c: Fix definitions of wddata[bwl].
410 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
412 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
413 fit in the buffer, try to match the empty keyword.
415 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
417 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
418 * fr30-ibld.c: Regenerate.
419 * m32r-ibld.c: Regenerate.
420 * openrisc-ibld.c: Regenerate.
422 2001-11-04 Chris Demetriou <cgd@broadcom.com>
424 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
426 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
428 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
429 * configure: Regernate.
430 * po/fr.po: New file.
431 * po/sv.po: New file.
432 * po/tr.po: New file.
434 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
436 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
439 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
441 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
443 * Makefile.in: Regenerate.
444 * mmix-dis.c, mmix-opc.c: New files.
446 2001-10-29 Kazu Hirata <kazu@hxi.com>
448 * d30v-dis.c: Fix a comment typo.
450 2001-10-23 Chris Demetriou <cgd@broadcom.com>
452 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
453 "bltzall" as writing GPR 31 (since they do).
455 * mips-dis.c (print_insn_arg): Calculate info->target
457 (print_insn_mips): Fill in instruction info.
458 (print_mips16_insn_arg): Remove unneded variable 'val'.
459 Removed duplicated instruction target calculations,
460 calculate once and print that result. Use same idiom for
461 masking the jump segment bits as is used in print_insn_arg.
463 2001-10-20 Alan Modra <amodra@bigpond.net.au>
465 * ppc-opc.c (CT): Make it an optional operand.
467 2001-10-17 Chris Demetriou <cgd@broadcom.com>
469 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
470 SB-1 binaries include instructions specific to the SB-1.
471 * mips-opc.c (SB1): New definition.
472 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
473 "recip.ps", "rsqrt.ps", and "sqrt.ps".
475 2001-10-17 matthew green <mrg@redhat.com>
477 * ppc-opc.c (STRM): New AltiVec operand.
478 (XDSS): New AltiVec instruction form.
479 (mtvscr): Correct operand list.
480 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
482 2001-10-17 Alan Modra <amodra@bigpond.net.au>
484 * po/POTFILES.in: Regenerate.
486 2001-10-13 matthew green <mrg@redhat.com>
488 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
489 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
490 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
492 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
494 * cgen-ibld.in: Include safe-ctype.h in preference to
496 * cgen-asm.in: Include safe-ctype.h in preference to
497 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
498 TOLOWER instead of tolower.
499 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
500 string elements in constructed regular expression.
501 * fr30-asm.c: Regenerate.
502 * fr30-desc.c: Regenerate.
503 * fr30-ibld.c: Regenerate.
504 * m32r-asm.c: Regenerate.
505 * m32r-desc.c: Regenerate.
506 * m32r-ibld.c: Regenerate.
507 * openrisc-asm.c: Regenerate.
508 * openrisc-desc.c: Regenerate.
509 * openrisc-ibld.c: Regenerate.
510 * po/opcodes.pot: Regenerate.
512 2001-10-12 matthew green <mrg@redhat.com>
514 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
515 instruction field instruction/extraction functions for new BookE
516 DE form instructions.
517 (CT): New macro for CT field in an X form instruction.
518 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
520 (PPC64): Don't include PPC_OPCODE_PPC.
521 (403): New opcode macro for PPC403 processors.
522 (BOOKE): New opcode macro for BookE processors.
523 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
524 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
525 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
526 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
527 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
528 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
529 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
530 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
531 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
532 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
533 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
534 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
535 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
536 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
538 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
539 for a disassembler option of `booke', `booke32' or `booke64' to enable
540 BookE support in the disassembler.
542 2001-10-12 John Healy <jhealy@redhat.com>
544 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
545 for the length when extracting the base part of the insn.
547 2001-10-09 Bruno Haible <haible@clisp.cons.org>
549 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
550 regular expression. Fix some formatting problems.
551 * fr30-asm.c: Regenerate.
552 * openrisc-asm.c: Regenerate.
553 * m32r-asm.c: Regenerate.
555 2001-10-09 Christian Groessler <cpg@aladdin.de>
557 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
558 of indirect register memory accesses to be same format the
561 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
563 * sh-opc.h: Fix encoding of least significant nibble of the
564 DSP single data transfer instructions.
566 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
569 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
571 * cgen-asm.in: Fix compile time warning messages in generated
573 * cgen-dis.in: The same.
574 * cgen-ibld.in: The same.
575 * fr30-asm.c: Regenerate.
576 * fr30-desc.c: Regenerate.
577 * fr30-dis.c: Regenerate.
578 * fr30-ibld.c: Regenerate.
579 * fr30-opc.c: Regenerate.
580 * m32r-asm.c: Regenerate.
581 * m32r-desc.c: Regenerate.
582 * m32r-dis.c: Regenerate.
583 * m32r-ibld.c: Regenerate.
584 * m32r-opc.c: Regenerate.
585 * m32r-opinst.c Regenerate.
586 * openrisc-asm.c: Regenerate.
587 * openrisc-desc.c: Regenerate.
588 * openrisc-dis.c: Regenerate.
589 * openrisc-ibld.c: Regenerate.
590 * openrisc-opc.c: Regenerate.
591 * openrisc-opc.h: Regenerate.
592 * Makefile.in: Regenerate.
593 * po/POTFILES.in: Regenerate.
594 * po/opcodes.pot: Regenerate.
596 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
598 * arm-opc.h (arm_opcodes): Add cirrus insns.
600 * arm-dis.c (print_insn_arm): Add 'I' case.
602 2001-10-03 Alan Modra <amodra@bigpond.net.au>
604 * po/POTFILES.in: Regenerate.
605 * configure: Regenerate.
607 2001-10-02 Alan Modra <amodra@bigpond.net.au>
609 * Makefile.am (Makefile): Depend on bfd/configure.in.
611 * Makefile.in: Regenerate.
613 2001-09-30 John Healy <jhealy@redhat.com>
615 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
616 calls to cgen_get_insn_value and cgen_put_insn_value calls.
617 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
619 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
621 * Makefile.am: Update dependencies with "make dep-am".
622 * Makefile.in: Regenerate.
624 2001-09-26 Alan Modra <amodra@bigpond.net.au>
626 * arc-dis.c: Formatting fixes.
627 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
629 2001-09-21 Bruno Haible <haible@clisp.cons.org>
631 * arc-dis.c: Don't include <ctype.h>.
632 * openrisc-desc.c: Likewise.
633 * openrisc-ibld.c: Likewise.
635 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
637 * fr30-opc.c: Fix compile time warning messages.
638 * i370-opc.c: Fix compile time warning messages.
639 * i960-dis.c: Fix compile time warning messages.
640 * m32r-asm.c: Fix compile time warning messages.
641 * m32r-desc.c: Fix compile time warning messages.
642 * m32r-dis.c: Fix compile time warning messages.
643 * m32r-ibld.c: Fix compile time warning messages.
644 * m32r-opc.c: Fix compile time warning messages.
645 * m32r-opinst.c: Fix compile time warning messages.
646 * ns32k-dis.c: Fix compile time warning messages.
647 * openrisc-asm.c: Fix compile time warning messages.
648 * openrisc-desc.c: Fix compile time warning messages.
649 * openrisc-dis.c: Fix compile time warning messages.
650 * openrisc-ibld.c: Fix compile time warning messages.
651 * openrisc-opc.c: Fix compile time warning messages.
652 * pdp11-dis.c: Fix compile time warning messages.
653 * tic54x-dis.c: Fix compile time warning messages.
654 * v850-opc.c: Fix compile time warning messages.
655 * vax-dis.c: Fix compile time warning messages.
656 * w65-opc.h: Fix compile time warning messages.
657 * z8k-opc.h: Fix compile time warning messages.
658 * z8kgen.c: Fix compile time warning messages.
660 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
662 * arm-dis.c: Fix compile time warning messages.
663 * cgen-asm.c: Fix compile time warning messages.
664 * cgen-dis.c: Fix compile time warning messages.
665 * cris-dis.c: Fix compile time warning messages.
666 * d10v-dis.c: Fix compile time warning messages.
667 * fr30-asm.c: Fix compile time warning messages.
668 * fr30-desc.c: Fix compile time warning messages.
669 * fr30-dis.c: Fix compile time warning messages.
670 * fr30-ibld.c: Fix compile time warning messages.
672 2001-09-18 Bruno Haible <haible@clisp.cons.org>
674 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
675 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
676 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
677 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
679 (cgen_keyword_add): Use ISALNUM instead of isalnum.
680 (hash_keyword_name): Use TOLOWER instead of tolower.
681 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
682 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
684 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
685 * fr30-desc.c: Don't include <ctype.h>.
686 * fr30-ibld.c: Likewise.
687 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
688 (load_insn_classes, parse_resource_users, load_depfile): Use
689 ISSPACE instead of isspace.
690 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
691 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
693 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
694 * m32r-desc.c: Don't include <ctype.h>.
695 * m32r-ibld.c: Likewise.
696 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
697 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
699 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
701 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
703 * Makefile.am: Add rules and dependencies to create the s/390 opcode
704 table out of s390-opc.txt automatically.
705 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
706 * s390-mkopc.c (dumpTable): Change output to create a complete file.
707 * s390-opc.c: New improved opcode format macros and remove the
708 pregenerated opcode table.
709 * s390-opc.txt: Adapt to new improved opcode format macros.
711 2001-09-14 David Schleef <ds@schleef.org>
713 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
715 2001-09-04 Alan Modra <amodra@bigpond.net.au>
717 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
718 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
720 2001-08-31 Eric Christopher <echristo@redhat.com>
721 Jason Eckhardt <jle@redhat.com>
723 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
724 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
727 2001-08-31 Andreas Jaeger <aj@suse.de>
729 * tic54x-opc.c: Add default initializers to avoid warnings.
731 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
732 * arc-ext.c: Likewise.
734 2001-08-28 matthew gren <mrg@redhat.com>
736 * ppc-opc.c (icbt): Order correctly.
738 2001-08-27 David Edelsohn <dje@watson.ibm.com>
739 Torbjorn Granlund <tege@swox.com>
741 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
743 (insert_ds): Complain if not a multiple of 4.
745 (XSYNC_MASK): Define.
746 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
747 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
749 2001-08-26 Andreas Jaeger <aj@suse.de>
751 * h8500-opc.h: Add default initializers to h8500_table to shut up
754 2001-08-25 Andreas Jaeger <aj@suse.de>
756 * tic54x-dis.c: Add unused attributes where needed.
758 * z8k-dis.c (output_instr): Add unused attribute.
760 * h8300-dis.c: Add missing prototypes.
761 (bfd_h8_disassemble): Make static.
763 * cris-dis.c: Add missing prototype.
764 * h8500-dis.c: Likewise.
765 * m68hc11-dis.c: Likewise.
766 * pj-dis.c: Likewise.
767 * tic54x-dis.c: Likewise.
768 * v850-dis.c: Likewise.
769 * vax-dis.c: Likewise.
770 * w65-dis.c: Likewise.
771 * z8k-dis.c: Likewise.
773 * d10v-dis.c: Add missing prototype.
774 (dis_long): Remove unused variable.
775 (dis_2_short): Likewise.
777 * sh-dis.c: Add missing prototypes.
778 * v850-opc.c: Likewise.
779 Add unused attributes where needed.
781 * ns32k-dis.c: Add missing prototypes.
782 (bit_extract_simple): Remove unused variable.
784 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
786 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
787 branch instructions for gcc 3.0.
788 * opcodes/s390-opc.txt: Likewise.
790 2001-08-21 Andreas Jaeger <aj@suse.de>
792 * i960-dis.c: Add parameters for prototypes
793 (ctrl): Add unused attributes.
797 * mips-dis.c: Add missing prototypes.
798 * a29k-dis.c: Likewise.
799 * arc-dis.c: Likewise.
800 * ia64-opc.c: Likewise.
802 * s390-dis.c: Add missing prototypes.
803 (init_disasm): Remove unused attribute since the parameter is
806 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
808 * mips-opc.c (M1): Define. Reformatted Code.
809 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
812 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
814 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
815 the corresponding non-likely insn is in MIPS I.
817 2001-08-13 Kazu Hirata <kazu@hxi.com>
819 * mcore-dis.c: Fix formatting.
820 * mips-dis.c: Likewise.
821 * pj-dis.c: Likewise.
822 * z8k-dis.c: Likewise.
824 2001-08-12 Richard Henderson <rth@redhat.com>
826 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
827 to *VALUEP. Regenerate all cgen files.
829 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
831 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
833 * mips-opc.c (G6): Undefine.
834 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
835 as the first "move" alternative.
837 2001-08-10 Andreas Jaeger <aj@suse.de>
839 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
841 * configure: Regenerate.
843 2001-08-10 Alan Modra <amodra@bigpond.net.au>
845 * ppc-opc.c: Revert 2001-08-08.
847 2001-08-09 Alan Modra <amodra@bigpond.net.au>
849 * dis-buf.c (generic_strcat_address): Add missing prototype.
850 #if 0 the functions as it is unused.
852 2001-08-08 Alan Modra <amodra@bigpond.net.au>
854 1999-10-25 Torbjorn Granlund <tege@swox.com>
855 * ppc-opc.c: Include "bfd.h".
856 (powerpc_operands): Add new field for reloc type.
858 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
860 * mips-dis.c (print_insn_arg): Don't use software integer registers
861 for coprocessor registers.
862 (get_mips_isa): Removed.
863 (is_newabi): New function, checks if NewABI is used.
864 (_print_insn_mips): Get distinction between old ABI and new ABI right.
866 2001-08-01 Christian Groessler <cpg@aladdin.de>
868 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
869 get stderr definition.
870 (internal, gas): Removed warnings.
871 (gas): Create a correct final entry for created array.
872 * z8k-opc.h: Recreated with new z8kgen.
874 2001-07-28 Kazu Hirata <kazu@hxi.com>
876 * i386-dis.c: Fix formatting.
878 2001-07-28 Matthias Kramm <kramm@quiss.org>
880 * i386-dis.c: Change formatting conventions for architecture
881 i386:intel to better match the format of various intel i386
882 assemblers, like nasm, tasm or masm.
884 2001-07-24 Alan Modra <amodra@bigpond.net.au>
886 * Makefile.am: Update dependencies with "make dep-am".
887 * Makefile.in: Regenerate
889 2001-07-24 Kazu Hirata <kazu@hxi.com>
891 * alpha-dis.c: Fix formatting.
892 * cris-dis.c: Likewise.
893 * d10v-dis.c: Likewise.
894 * d30v-dis.c: Likewise.
895 * m10300-dis.c: Likewise.
896 * tic54x-dis.c: Likewise.
898 2001-07-23 Kazu Hirata <kazu@hxi.com>
900 * m68k-dis.c: Fix formatting.
901 * pj-dis.c: Likewise.
902 * s390-dis.c: Likewise.
903 * z8k-dis.c: Likewise.
905 2001-07-21 Chris Demetriou <cgd@broadcom.com>
907 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
908 into the rest of the surrounding definitions.
910 2001-07-18 Alan Modra <amodra@bigpond.net.au>
912 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
913 for lgdt, lidt, sgdt, sidt.
915 2001-07-13 Philip Blundell <philb@gnu.org>
917 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
919 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
921 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
923 (@arch@_cgen_build_insn_regex): New routine from Graydon.
924 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
925 to verify if it is worth parsing the insn as insn "x". Also update
926 error message when insn is not a recognized format of the insn vs
927 when the insn is completely unrecognized.
929 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
931 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
933 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
934 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
936 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
938 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
939 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
940 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
942 2001-07-05 Ben Elliston <bje@redhat.com>
944 * Makefile.am (CPUDIR): Define.
945 (stamp-m32r): Update dependencies.
947 (stamp-openrisc): Ditto.
948 * Makefile.in: Regenerate.
950 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
952 * ppc-opc.c: Fix encoding of 'clf' instruction.
954 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
956 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
958 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
960 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
961 * cgen-opc.c (cgen_keyword_add): Ignore special first
962 character when building nonalpha_chars field.
964 2001-06-24 Ben Elliston <bje@redhat.com>
966 * m88k-dis.c: Format to conform to GNU coding standards.
968 2001-06-23 Andreas Jaeger <aj@suse.de>
970 * disassemble.c (disassembler_usage): Add unused attribute.
972 2001-06-22 Eric Christopher <echristo@redhat.com>
974 * mips-opc.c: Move prefx to start of the table.
976 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
978 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
981 2001-06-22 Pauli <pauli@moreton.com.au>
983 * m68k-opc.c: Add wdebug instruction.
985 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
987 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
989 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
991 * cgen-asm.c (cgen_parse_keyword): When looking for the
992 boundaries of a keyword, allow any special characters
993 that are actually in one of the allowed keyword.
994 * cgen-opc.c (cgen_keyword_add): Add any special characters
995 to the nonalpha_chars field.
997 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
999 * s390-opc.c: Add lgh instruction.
1000 * s390-opc.txt: Likewise.
1002 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1004 * i386-dis.c: Group function prototypes in one place.
1005 (FLOATCODE): Redefine as 1.
1006 (USE_GROUPS): Redefine as 2.
1007 (USE_PREFIX_USER_TABLE): Redefine as 3.
1008 (X86_64_SPECIAL): Define as 4.
1009 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1010 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1011 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1012 (dis386): New table combining above four tables.
1013 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1014 (dis386_twobyte): New table combining above two tables.
1015 (x86_64_table): New table to handle x86_64.
1017 (float_mem_att, float_mem_intel): Delet.
1018 (float_mem): New table combining above two tables.
1019 (print_insn_i386): Modify for above.
1020 (dofloat): Likewise.
1021 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1022 Return 0 on success, 1 if no valid alternative.
1023 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1024 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1025 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1026 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1028 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1029 (OP_I64): If not 64-bit mode, call OP_I.
1030 OP_OFF64): If not 64-bit mode, call OP_OFF.
1031 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1032 'ignore'/'ignored' to 'bytemode'.
1034 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1036 * configure.in: Sort 'ta' case statement.
1037 * configure: Regenerate.
1039 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1041 (disx86_64_att): Likewise.
1042 (dis386_twobyte_att): Likewise.
1043 (print_insn_i386): Don't print branch hints as a prefix.
1044 (putop): 'H' macro prints branch hints.
1045 (get64): Kill compile warnings.
1047 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1049 * sh-opc.h (sh_table): Don't use empty initializers.
1051 2001-06-06 Christian Groessler <cpg@aladdin.de>
1053 * z8k-dis.c: Fix formatting.
1054 (unpack_instr): Remove unused cases in switch statement. Add
1055 safety abort() in default case.
1056 (unparse_instr): Add safety abort() in default case.
1058 2001-06-06 Peter Jakubek <pjak@snafu.de>
1060 * m68k-dis.c (print_insn_m68k): Fix typo.
1061 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1062 mcf (ColdFire) div, rem and moveb instructions.
1064 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1066 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1067 (cond_jump_mode, loop_jcxz_mode): Define.
1068 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1069 appropriate, and 'F' suffix to loop insns.
1070 (disx86_64_att): Likewise.
1071 (dis386_twobyte_att): Likewise.
1072 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1073 Output data size prefix for long conditional jumps. Output cs and
1075 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1076 (OP_J): Don't make PREFIX_DATA used.
1078 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1080 * sh-opc.h (sh_table): Complete last element entry to avoid
1083 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1085 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1087 2001-05-23 Alan Modra <amodra@one.net.au>
1089 * arc-opc.c: Whitespace changes.
1091 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1093 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1096 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1098 * cgen-dis.in (extract_normal): Complete support for min<base case.
1100 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1102 * mips-dis.c (INSNLEN): Rename MAXLEN.
1103 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1104 (print_insn_arg): Remove $ prefix of register names.
1105 (set_mips_isa_type): Remove.
1106 (mips_isa_type): New function.
1107 (get_mips_isa): New Function.
1108 (print_insn_mips): Rename _print_insn_mips.
1109 (_print_insn_mips): New function, contains code which was
1110 duplicated in print_insn_big_mips and print_insn_little_mips.
1111 (print_insn_big_mips): Moved code to _print_insn_mips.
1112 (print_insn_little_mips): Likewise.
1113 (print_mips16_insn_arg): Remove $ prefix of register names.
1114 Print error message before abort.
1116 2001-05-14 J.T. Conklin <jtc@redback.com>
1118 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1119 simplified mnemonics used for setting PPC750-specific special
1122 2001-05-12 H.J. Lu <hjl@gnu.org>
1124 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1127 2001-05-12 Peter Targett <peter.targett@arccores.com>
1129 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1130 register to r/w. Formatting fixes throughout file.
1132 2001-05-12 Alan Modra <amodra@one.net.au>
1134 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1136 (twobyte_has_modrm): Update table.
1137 (need_modrm): Give it file scope.
1138 (MODRM_CHECK): Define.
1139 (dofloat): Use MODRM_CHECK.
1144 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1146 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1147 even at end of a section.
1148 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1149 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1151 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1153 * disassemble.c (disassembler_usage): Remove unused attribute.
1155 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1157 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1159 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1161 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1162 assume incoming buffer already has the base insn loaded. Handle
1163 smaller-than-base instructions for variable-length case.
1165 2001-05-04 Alan Modra <amodra@one.net.au>
1167 * i386-dis.c (Ev, Ed): Remove duplicate define.
1170 (OP_XS): New function.
1171 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1173 (dis386_twobyte_intel): Likewise.
1174 (prefix_user_table): Use MS for maskmovq operand.
1176 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1178 * Makefile.am: Add OpenRISC target.
1179 * Makefile.in: Regenerated.
1181 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1183 * configure.in (bfd_openrisc_arch): Add target.
1184 * configure: Regenerated.
1186 * openrisc-asm.c: New file.
1187 * openrisc-desc.c: Likewise.
1188 * openrisc-desc.h: Likewise.
1189 * openrisc-dis.c: Likewise.
1190 * openrisc-ibld.c: Likewise.
1191 * openrisc-opc.c: Likewise.
1192 * openrisc-opc.h: Likewise.
1194 2001-04-24 Christian Groessler <cpg@aladdin.de>
1196 * z8k-dis.c: add names of control registers (ctrl_names);
1197 (seg_length): provides instruction length fixup for segmented
1198 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1199 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1200 (unparse_intr): handle CLASS_PR, print addresses without '#'
1201 * z8k-opc.h: re-created with new z8kgen
1202 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1203 entries for ldctl/ldctlb instruction
1205 2001-04-06 Andreas Jaeger <aj@suse.de>
1207 * i386-dis.c: Add ffreep instruction.
1209 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1211 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1213 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1215 * i386-dis.c (PREGRP25): Define.
1216 (dis386_twobyte_att): Use here in place of "movntq" entry.
1217 (dis386_twobyte_intel): Likewise.
1218 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1220 (dis386_twobyte_att): Use here.
1221 (dis386_twobyte_intel): Likewise.
1222 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1223 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1224 (prefix_user_table): Cosmetic changes to "bad" entries.
1226 2001-03-23 Nick Clifton <nickc@redhat.com>
1228 * mips-opc.c: Remove extraneous whitespace.
1229 * mips-dis.c: Remove extraneous whitespace.
1231 2001-03-22 Ben Elliston <bje@redhat.com>
1233 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1234 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1235 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1236 to allay a compiler warning.
1238 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1240 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1241 (dis386_twobyte_intel): Likewise.
1242 (twobyte_has_modrm): Set entry for paddq, psubq.
1244 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1246 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1247 determination via CGEN_COMPUTE_MACH.
1248 * fr30-desc.c: Regenerate.
1249 * fr30-dis.c: Regenerate.
1250 * fr30-opc.h: Regenerate.
1251 * m32r-desc.c: Regenerate.
1252 * m32r-dis.c: Regenerate.
1253 * m32r-opc.h: Regenerate.
1254 * m32r-opinst.c: Regenerate.
1256 2001-03-20 H.J. Lu <hjl@gnu.org>
1258 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1259 * configure: Rebuild.
1261 2001-03-19 Jim Wilson <wilson@redhat.com>
1263 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1264 notestr if larger than xsect.
1265 (in_class): Handle format M5.
1266 * ia64-asmtab.c: Regnerate.
1268 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1270 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1271 has more than one byte left to read.
1273 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1275 * s390-opc.c: Add new opcodes. Smooth out formatting.
1276 * s390-opc.txt: Add new opcodes.
1278 2001-03-06 Nick Clifton <nickc@redhat.com>
1280 * arm-dis.c (print_insn_thumb): Compute destination address
1281 of BLX(1) instruction by taking bit 1 from PC and not from bit
1284 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1286 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1287 so command line switches will work.
1289 2001-03-05 Dave Brolley <brolley@redhat.com>
1291 * fr30-asm.c: Regenerate.
1292 * fr30-desc.c: Regenerate.
1293 * fr30-desc.h: Regenerate.
1294 * fr30-dis.c: Regenerate.
1295 * fr30-ibld.c: Regenerate.
1296 * fr30-opc.c: Regenerate.
1297 * fr30-opc.h: Regenerate.
1298 * m32r-asm.c: Regenerate.
1299 * m32r-desc.c: Regenerate.
1300 * m32r-desc.h: Regenerate.
1301 * m32r-dis.c: Regenerate.
1302 * m32r-ibld.c: Regenerate.
1303 * m32r-opc.c: Regenerate.
1304 * m32r-opc.h: Regenerate.
1305 * m32r-opinst.c: Regenerate.
1307 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1309 * m68k-opc.c: fix cpushl according to Motorola. Enable
1310 bunch of instructions for Coldfire 5407 and add all new.
1312 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1314 * configure.in (BFD_VERSION): Do without grep.
1315 * configure: Regenerate.
1316 * Makefile.am: Run "make dep-am".
1317 * Makefile.in: Regenerate.
1319 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1321 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1322 * ia64-asmtab.c: Regenerate.
1324 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1326 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1327 separate variants: one for IMM22 and the other for IMM14.
1328 * ia64-asmtab.c: Regenerate.
1330 2001-02-21 Greg McGary <greg@mcgary.org>
1332 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1334 2001-02-20 H.J. Lu <hjl@gnu.org>
1336 * Makefile.am (ia64-ic.tbl): Remove the target.
1337 (ia64-raw.tbl): Likewise.
1338 (ia64-waw.tbl): Likewise.
1339 (ia64-war.tbl): Likewise.
1340 (ia64-asmtab.c): Generate it in the source directory.
1341 * Makefile.in: Regenerated.
1343 2001-02-18 lars brinkhoff <lars@nocrew.org>
1345 * Makefile.am: Add PDP-11 target.
1346 * configure.in: Likewise.
1347 * disassemble.c: Likewise.
1348 * pdp11-dis.c: New file.
1349 * pdp11-opc.c: New file.
1351 2001-02-14 Jim Wilson <wilson@redhat.com>
1353 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1354 * ia64-asmtab.c: Regenerate.
1356 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1358 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1362 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1364 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1365 the following instruction not of the jump itself for the jump
1367 (print_mips16_insn_arg): Likewise.
1369 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1371 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1373 * Makefile.in: Regenerate.
1375 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1377 * Makefile.am: Add linux target for S/390.
1378 * Makefile.in: Likewise.
1379 * configure.in: Likewise.
1380 * disassemble.c: Likewise.
1381 * s390-dis.c: New file.
1382 * s390-mkopc.c: New file.
1383 * s390-opc.c: New file.
1384 * s390-opc.txt: New file.
1386 2001-02-05 Jim Wilson <wilson@redhat.com>
1388 * ia64-asmtab.c: Revert 2000-12-16 change.
1390 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1392 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1393 * m32r-desc.h: Regenerate.
1395 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1397 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1398 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1400 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1402 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1404 2001-01-13 Nick Clifton <nickc@redhat.com>
1406 * disassemble.c: Remove spurious white space.
1408 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1410 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1413 2001-01-11 Peter Targett <peter.targett@arccores.com>
1415 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1416 * Makefile.am (C_FILES): Add arc-ext.c.
1417 (ALL_MACHINES) Add arc-ext.lo.
1418 (INCLUDES) Add opcode directory to list.
1419 New dependency entry for arc-ext.lo.
1420 * disassemble.c (disassembler): Correct call to
1421 arc_get_disassembler.
1422 * arc-opc.c: New update for ARC, including full base
1423 instructions for ARC variants.
1424 * arc-dis.h, arc-dis.c: New update for ARC, including
1425 extensibility functionality.
1426 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1428 2001-01-10 Jan Hubicka <jh@suse.cz>
1430 * i386-dis.c (PREGRP15 - PREGRP24): New.
1431 (dis386_twobyt): Add SSE2 instructions.
1432 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1433 (twobyte_uses_f3_prefix): ... this one.
1434 (grps): Add SSE instructions.
1435 (prefix_user_table): Add two new slots; add SSE2 instructions.
1436 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1437 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1438 to prefix_user_table.
1439 (OP_E): Accept mfence and lfence as well.
1440 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1441 (OP_XMM): Support REX extensions.
1445 2001-01-09 Nick Clifton <nickc@redhat.com>
1447 * arm-dis.c (print_insn): Set pc to zero for instructions with
1448 a reloc associated with them.
1450 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1452 * cgen-asm.in (parse_insn_normal): Changed syn to be
1453 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1454 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1455 to '\0' to use 0 instead.
1456 * cgen-dis.in (print_insn_normal): Ditto.
1457 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1459 2001-01-05 Jan Hubicka <jh@suse.cz>
1461 * i386-dis.c: Add x86_64 support.
1462 (rex): New static variable.
1463 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1464 (USED_REX): New macro.
1465 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1466 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1467 (OP_REG, OP_OFF): Declare.
1468 (get64, get32, get32s): New functions.
1469 (r??_reg): New constants.
1470 (dis386_att): Change templates of instruction implicitly promoted
1471 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1473 (dis386_intel): Likewise.
1474 (dixx86_64_att): New table based on dis386_att.
1475 (dixx86_64_intel): New table based on dis386_intel.
1476 (names64, names8rex): New global variable.
1477 (names32, names16): Add extended registers.
1478 (prefix_user_t): Recognize rex prefixes.
1479 (prefix_name): Print REX prefixes nicely.
1480 (op_riprel): New global variable.
1481 (start_pc): Set type to bfd_vma.
1482 (print_insn_i386): Detect the 64bit mode and use proper table;
1483 move ckprefix after initializing the buffer; output unused rex prefixes;
1484 output information about target of RIP relative addresses.
1485 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1486 (print_operand_value): New function.
1487 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1488 REX prefix and new modes.
1489 (get64, get32s): New.
1490 (get32): Return bfd_signed_vma type.
1491 (set_op): Initialize the op_riprel.
1492 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1494 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1496 cgen-dis.in (read_insn): Use bfd_get_bits()
1498 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1500 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1501 (hash_insn_list): Likewise
1502 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1503 (extract_1): Use bfd_get_bits().
1504 (extract_normal): Apply sign extension to both extraction
1506 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1507 (cgen_put_insn_value): Use bfd_put_bits()
1509 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1511 * cgen-asm.in (parse_insn_normal): Print better error message for
1512 instructions with missing operands.
1514 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1516 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1518 2000-12-16 Nick Clifton <nickc@redhat.com>
1520 * Makefile.in: Regenerate.
1521 * aclocal.m4: Regenerate.
1522 * config.in: Regenerate.
1523 * configure.in: Add spacing.
1524 * configure: Regenerate.
1525 * ia64-asmtab.c: Regenerate.
1526 * po/opcodes.pot: Regenerate.
1528 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1530 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1531 error messages over later parse-time ones.
1533 2000-12-12 Jim Wilson <wilson@redhat.com>
1535 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1537 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1538 (print_dependency_table): Print NULL if semantics field not set.
1539 (insert_opcode_dependencies): Mark cmp parameter as unused.
1540 (print_main_table): Use fprintf_vma to print long long fields.
1541 (main): Mark argv paramter as unused. Convert to old style definition.
1542 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1543 * ia64-asmtab.c: Regnerate.
1545 2000-12-09 Nick Clifton <nickc@redhat.com>
1547 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1550 * fr30-dis.c: Regenerate.
1552 2000-12-08 Peter Targett <peter.targett@arccores.com>
1554 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1555 * Makefile.am (C_FILES): Add arc-ext.c.
1556 (ALL_MACHINES) Add arc-ext.lo.
1557 (INCLUDES) Add opcode directory to list.
1558 New dependency entry for arc-ext.lo.
1559 * disassemble.c (disassembler): Correct call to
1560 arc_get_disassembler.
1561 * arc-opc.c: New update for ARC, including full base
1562 instructions for ARC variants.
1563 * arc-dis.h, arc-dis.c: New update for ARC, including
1564 extensibility functionality.
1565 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1567 2000-12-03 Chris Demetriou cgd@sibyte.com
1569 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1570 MOD_HILO, and MOD_LO macros.
1572 * mips-opc.c (M1, M2): Delete.
1573 (mips_builtin_opcodes): Remove all uses of M1.
1575 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1576 instructions take "G" format second operands and use the
1578 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1580 Delete "sel" code operands from mfc1 and mtc1.
1581 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1584 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1585 Chris Demetriou cgd@sibyte.com
1587 * mips-opc.c (mips_builtin_opcodes): Finish additions
1588 for MIPS32 support, and clean up existing entries for
1589 aesthetics, consistency with the MIPS32 ISA, and
1590 with consistency the rest of the table.
1592 2000-12-01 Nick Clifton <nickc@redhat.com>
1594 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1597 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1599 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1600 specifiers. Update 'B' for new constant names, and remove
1602 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1603 near the top of the array, so they are disassembled properly.
1604 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1605 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1606 specifier. Add 'H' format specifier variants for "mfc1,"
1607 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1608 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1609 "wait" variant which uses 'J' operand specifier.
1611 * mips-dis.c (set_mips_isa_type): Update to use
1612 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1613 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1614 * mips-opc.c (I32): New constant for instructions added in
1617 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1619 * mips-dis.c (set_mips_isa_type): Add cases for
1620 bfd_mach_mips5 and bfd_mach_mips64.
1621 * mips-opc.c (I64): New definitions.
1623 * mips-dis.c (set_mips_isa_type): Add case for
1626 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1628 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1629 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1630 Initialize variable dc to NULL.
1631 (print_insn_shx): Remove unused label d_reg_n.
1633 2000-11-24 Nick Clifton <nickc@redhat.com>
1635 * arm-opc.h: Add new opcode formatting parameter 'B'.
1636 (arm_opcodes): Add XScale, v5, and v5te instructions.
1637 (thumb_opcodes): Add v5t instructions.
1639 * arm-dis.c (print_insn_arm): Handle new 'B' format
1641 (print_insn_thumb): Decode BLX(1) instruction.
1643 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1645 * mips-opc.c: Fix file header comment.
1647 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1649 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1650 print_insn_cris_with_register_prefix.
1652 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1654 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1656 2000-11-07 Matthew Green <mrg@redhat.com>
1658 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1659 must be loaded there in their entirety.
1661 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1663 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1664 (compute_arch_mask): Add v8plusb and v9b machines.
1665 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1666 * sparc-opc.c: Support for Cheetah instruction set.
1667 (prefetch_table): Add #invalidate.
1669 2000-10-16 Nick Clifton <nickc@redhat.com>
1671 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1673 2000-10-06 Dave Brolley <brolley@redhat.com>
1675 * fr30-desc.h: Regenerate.
1676 * m32r-desc.h: Regenerate.
1677 * m32r-ibld.c: Regenerate.
1679 2000-10-05 Jim Wilson <wilson@redhat.com>
1681 * ia64-ic.tbl: Update from Intel.
1682 * ia64-asmtab.c: Regenerate.
1684 2000-10-04 Kazu Hirata <kazu@hxi.com>
1686 * ia64-gen.c: Convert C++-style comments to C-style comments.
1687 * tic54x-dis.c: Likewise.
1689 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1691 Changes to add dollar prefix to registers for files where user symbols
1692 don't have a leading underscore. Fix formatting.
1693 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1694 (format_reg): Add parameter with_reg_prefix. All callers changed.
1695 (print_with_operands): Ditto.
1696 (print_insn_cris_generic): Renamed from print_insn_cris, add
1697 parameter with_reg_prefix.
1698 (print_insn_cris_with_register_prefix,
1699 print_insn_cris_without_register_prefix, cris_get_disassembler):
1701 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1703 2000-09-22 Jim Wilson <wilson@redhat.com>
1705 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1706 gt, ge, ngt, and nge.
1707 * ia64-asmtab.c: Regenerate.
1709 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1710 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1711 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1712 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1713 * ia64-asmtab.c: Regnerate.
1715 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1717 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1718 Add mfc0 and mtc0 with sub-selection values.
1719 Add clo and clz opcodes.
1720 Add msub and msubu instructions for MIPS32.
1721 Add madd/maddu aliases for mad/madu for MIPS32.
1722 Support wait, deret, eret, movn, pref for MIPS32.
1723 Support tlbp, tlbr, tlbwi, tlbwr.
1726 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1727 (print_insn_arg): Handle 'H' args.
1728 (set_mips_isa_type): Recognize 4K.
1729 Use CPU_* defines instead of hardcoded numbers.
1731 2000-09-11 Catherine Moore <clm@redhat.com>
1733 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1734 (d30v_format_tab): Use Rb2 for modinc and moddec.
1736 2000-09-07 Catherine Moore <clm@redhat.com>
1738 * d30v-opc.c (d30v_format_tab): Use format Ra for
1741 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1743 * configure: Rebuilt with new libtool.m4.
1745 2000-09-05 Nick Clifton <nickc@redhat.com>
1747 * configure: Regenerate.
1748 * po/opcodes.pot: Regenerate.
1750 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1752 * acinclude.m4: Include libtool and gettext macros from the
1754 * aclocal.m4, configure: Rebuilt.
1756 2000-08-30 Kazu Hirata <kazu@hxi.com>
1758 * tic80-dis.c: Fix formatting.
1760 2000-08-29 Kazu Hirata <kazu@hxi.com>
1762 * w65-dis.c: Fix formatting.
1764 2000-08-28 Mark Hatle <mhatle@mvista.com>
1766 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1767 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1768 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1769 instructions. Added extended mnemonic mftbl as defined in the
1770 405GP manual for all PPCs.
1772 2000-08-28 Jim Wilson <wilson@redhat.com>
1774 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1775 call. Change last goto to use failed instead of done.
1777 2000-08-28 Dave Brolley <brolley@redhat.com>
1779 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1780 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1781 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1782 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1783 * cgen-dis.in (read_insn): New static function.
1784 (print_insn): Use read_insn to read the insn into the buffer and set
1786 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1788 * fr30-asm.c: Regenerated.
1789 * fr30-desc.c: Regenerated.
1790 * fr30-desc.h: Regenerated.
1791 * fr30-dis.c: Regenerated.
1792 * fr30-ibld.c: Regenerated.
1793 * fr30-opc.c: Regenerated.
1794 * fr30-opc.h: Regenerated.
1795 * m32r-asm.c: Regenerated.
1796 * m32r-desc.c: Regenerated.
1797 * m32r-desc.h: Regenerated.
1798 * m32r-dis.c: Regenerated.
1799 * m32r-ibld.c: Regenerated.
1800 * m32r-opc.c: Regenerated.
1802 2000-08-28 Kazu Hirata <kazu@hxi.com>
1804 * tic30-dis.c: Fix formatting.
1806 2000-08-27 Kazu Hirata <kazu@hxi.com>
1808 * sh-dis.c: Fix formatting.
1810 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1812 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1814 2000-08-24 Kazu Hirata <kazu@hxi.com>
1816 * z8k-dis.c: Fix formatting.
1818 2000-08-16 Jim Wilson <wilson@redhat.com>
1820 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1821 break, mov-immediate, nop.
1822 * ia64-opc-f.c: Delete fpsub instructions.
1823 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1824 address operand. Rewrite using macros to avoid long lines.
1825 * ia64-opc.h (POSTINC): Define.
1826 * ia64-asmtab.c: Regenerate.
1828 2000-08-15 Jim Wilson <wilson@redhat.com>
1830 * ia64-ic.tbl: Add missing entries.
1832 2000-08-08 Jason Eckhardt <jle@redhat.com>
1834 * i860-dis.c (print_br_address): Change third argument from int
1837 2000-08-07 Richard Henderson <rth@redhat.com>
1839 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1840 for MLI templates. Handle IA64_OPND_TGT64.
1842 2000-08-04 Ben Elliston <bje@redhat.com>
1844 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1845 * cgen.sh: Likewise.
1847 2000-08-02 Jim Wilson <wilson@redhat.com>
1849 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1851 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1853 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1854 Change return type from void to int. Check the combination
1855 of operands, return 1 if valid. Fix to avoid BUF overflow.
1856 Report undefined combinations of operands in COMMENT.
1857 Report internal errors to stderr. Output the adiw/sbiw
1858 constant operand in both decimal and hex.
1859 (print_insn_avr): Disassemble ldd/std with displacement of 0
1860 as ld/st. Check avr_operand () return value, handle invalid
1861 combinations of operands like unknown opcodes.
1863 2000-07-28 Ben Elliston <bje@redhat.com>
1865 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1866 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1867 * Makefile.in: Regenerate.
1868 * configure.in: Add --enable-cgen-maint option.
1869 * configure: Regenerate.
1871 2000-07-26 Dave Brolley <brolley@redhat.com>
1873 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1874 (cgen_hw_lookup_by_num): Ditto.
1875 (cgen_operand_lookup_by_name): Ditto.
1876 (print_address): Ditto.
1877 (print_keyword): Ditto.
1878 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1880 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1882 (cgen_parse_keyword): Ditto.
1884 2000-07-22 Jason Eckhardt <jle@redhat.com>
1886 * i860-dis.c: New file.
1887 (print_insn_i860): New function.
1888 (print_br_address): New function.
1889 (sign_extend): New function.
1890 (BITWISE_OP): New macro.
1891 (I860_REG_PREFIX): New macro.
1892 (grnames, frnames, crnames): New structures.
1894 * disassemble.c (ARCH_i860): Define.
1895 (disassembler): Add check for bfd_arch_i860 to set disassemble
1896 function to print_insn_i860.
1898 * Makefile.in (CFILES): Added i860-dis.c.
1899 (ALL_MACHINES): Added i860-dis.lo.
1900 (i860-dis.lo): New dependences.
1902 * configure.in: New bits for bfd_i860_arch.
1904 * configure: Regenerated.
1906 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1908 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1909 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1910 (cris-dis.lo, cris-opc.lo): New rules.
1911 * Makefile.in: Rebuild.
1912 * configure.in (bfd_cris_arch): New target.
1913 * configure: Rebuild.
1914 * disassemble.c (ARCH_cris): Define.
1915 (disassembler): Support ARCH_cris.
1916 * cris-dis.c, cris-opc.c: New files.
1917 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1919 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1921 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1922 Reported by Bill Clarke <llib@computer.org>.
1924 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1926 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1927 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1929 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1931 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1932 fput_const, extract_3, extract_5_load, extract_5_store,
1933 extract_5r_store, extract_5R_store, extract_10U_store,
1934 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1935 extract_12, extract_17, extract_22): Prototype.
1936 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1937 shadowing outer block.
1940 2000-07-05 DJ Delorie <dj@redhat.com>
1944 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1946 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1948 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1950 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1951 marked for translation (exception from the usual coding style).
1952 (print_insn_avr): Initialize insn2 to avoid warnings.
1954 2000-07-03 Kazu Hirata <kazu@hxi.com>
1956 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1957 * h8500-dis.c: Fix formatting.
1959 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1961 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1962 (CLEANFILES): Add DEPA.
1963 * Makefile.in: Regenerate.
1965 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1967 * arm-dis.c (regnames): Add an additional register set to match
1968 the set used by GCC. Make it the default.
1970 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1972 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1974 * Makefile.in: Regenerate.
1976 2000-06-20 H.J. Lu <hjl@gnu.org>
1978 * Makefile.am: Rebuild dependency.
1979 * Makefile.in: Rebuild.
1981 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1983 * Makefile.in, configure: regenerate
1984 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1986 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1988 * configure.in: Recognize m68hc12 and m68hc11.
1989 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1990 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1991 and opcode generation for m68hc11 and m68hc12.
1993 2000-06-16 Nick Duffek <nsd@redhat.com>
1995 * disassemble.c (disassembler): Refer to the PowerPC 620 using
1996 bfd_mach_ppc_620 instead of 620.
1998 2000-06-12 Kazu Hirata <kazu@hxi.com>
2000 * h8300-dis.c: Fix formatting.
2001 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2004 2000-06-09 Denis Chertykov <denisc@overta.ru>
2006 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2008 2000-06-07 Denis Chertykov <denisc@overta.ru>
2010 * avr-dis.c: completely rewritten.
2012 2000-06-02 Kazu Hirata <kazu@hxi.com>
2014 * h8300-dis.c: Follow the GNU coding style.
2015 (bfd_h8_disassemble) Fix a typo.
2017 2000-06-01 Kazu Hirata <kazu@hxi.com>
2019 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2020 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2021 correctly. Fix a typo.
2023 2000-05-31 Nick Clifton <nickc@redhat.com>
2025 * opintl.h (_(String)): Explain why dgettext is used instead of
2028 2000-05-30 Nick Clifton <nickc@redhat.com>
2030 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2031 bindtextdomain): Replace defines with those from intl/libgettext.h
2032 to quieten gcc warnings.
2034 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2036 * Makefile.am: Update dependencies with "make dep-am"
2037 * Makefile.in: Regenerate.
2039 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2041 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2042 sign-extending operands.
2044 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2046 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2049 2000-05-21 Nick Clifton <nickc@redhat.com>
2051 * Makefile.am (LIBIBERTY): Define.
2053 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2055 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2056 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2057 (reg_names): Rename to std_reg_names. Change it to a char **
2059 (std_reg_names): New name for reg_names.
2060 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2063 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2065 * fr30-desc.h: Partially regenerated to account for changed
2066 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2067 * m32r-desc.h: Ditto.
2069 2000-05-15 Nick Clifton <nickc@redhat.com>
2071 * arm-opc.h: Use upper case for flasg in MSR and MRS
2072 instructions. Allow any bit to be set in the field_mask of
2073 the MSR instruction.
2075 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2076 field_mask of an MSR instruction.
2078 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2080 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2081 instructions changed to ldrsb/ldrsh.
2083 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2085 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2086 target addresses for 'jal' and 'j'.
2088 2000-05-10 Geoff Keating <geoffk@redhat.com>
2090 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2091 also available in common mode when powerpc syntax is being used.
2093 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2095 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2096 (dummy_print_address): Ditto.
2098 2000-05-04 Timothy Wall <twall@redhat.com>
2100 * tic54x-opc.c: New.
2101 * tic54x-dis.c: New.
2102 * disassemble.c (disassembler): Add ARCH_tic54x.
2103 * configure.in: Added tic54x target.
2105 * Makefile.am: Add tic54x dependencies.
2106 * Makefile.in: Ditto.
2108 2000-05-03 J.T. Conklin <jtc@redback.com>
2110 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2111 vector unit operands.
2112 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2113 unit instruction formats.
2114 (PPCVEC): New macro, mask for vector instructions.
2115 (powerpc_operands): Add table entries for above operand types.
2116 (powerpc_opcodes): Add table entries for vector instructions.
2118 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2119 (print_insn_little_powerpc): Likewise.
2120 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2122 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2124 * configure.in: Add bfd_powerpc_64_arch.
2125 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2128 2000-04-24 Nick Clifton <nickc@redhat.com>
2130 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2133 2000-04-23 Denis Chertykov <denisc@overta.ru>
2135 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2137 (reg_fmul_r): New. Extract source register from FMUL instruction.
2138 (reg_muls_d): New. Extract destination register from MULS instruction.
2139 (reg_muls_r): New. Extract source register from MULS instruction.
2140 (reg_movw_d): New. Extract destination register from MOVW instruction.
2141 (reg_movw_r): New. Extract source register from MOVW instruction.
2142 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2143 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2145 2000-04-22 Timothy Wall <twall@redhat.com>
2147 * ia64-gen.c (general): Add an ordered table of primary
2148 opcode names, as well as priority fields to disassembly data
2149 structures to enforce a preferred disassembly format based on the
2150 ordering of the opcode tables.
2151 (load_insn_classes): Show a useful message if IC tables are missing.
2152 (load_depfile): Ditto.
2153 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2154 distinguish preferred disassembly.
2155 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2156 format. Fix incorrect flag on fma.s/fma.s.s0.
2157 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2158 the highest priority.
2159 * ia64-opc-b.c: Use more abbreviations.
2160 * ia64-asmtab.c: Regenerate.
2162 2000-04-21 Jason Eckhardt <jle@redhat.com>
2164 * hppa-dis.c (extract_16): New function.
2165 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2166 new operand types l,y,&,fe,fE,fx.
2168 2000-04-21 Richard Henderson <rth@redhat.com>
2169 David Mosberger <davidm@hpl.hp.com>
2170 Timothy Wall <twall@redhat.com>
2171 Bob Manson <manson@charmed.cygnus.com>
2172 Jim Wilson <wilson@redhat.com>
2174 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2175 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2176 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2178 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2179 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2180 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2181 * Makefile.in: Rebuild.
2182 * configure Rebuild.
2183 * configure.in (bfd_ia64_arch): New target.
2184 * disassemble.c (ARCH_ia64): Define.
2185 (disassembler): Support ARCH_ia64.
2186 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2187 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2188 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2189 ia64-war.tbl, ia64-waw.tbl: New files.
2191 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2193 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2194 (disassemble): Use them.
2196 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2198 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2199 * Makefile.am: Update dependencies.
2200 * Makefile.in: Regenerate.
2202 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2204 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2205 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2206 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2207 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2208 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2209 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2210 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2211 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2212 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2213 ansidecl.h as sysdep.h includes it.
2215 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2217 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2218 --enable-build-warnings option.
2219 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2220 * Makefile.in, configure: Re-generate.
2222 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2224 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2225 stc GBR,@-<REG_N> is available for arch_sh1_up.
2226 Group parallel processing insn with identical mnemonics together.
2227 Make three-operand psha / pshl come first.
2229 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2231 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2232 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2233 (sh_arg_type): Add A_PC.
2234 (sh_table): Update entries using immediates. Add repeat.
2235 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2236 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2238 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2240 * po/opcodes.pot: Regenerate.
2242 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2243 (DEP): Quote when passing vars to sub-make. Add warning message
2245 (DEP1): Rewrite for "gcc -MM".
2246 (CLEANFILES): Add DEP2.
2247 Update dependencies.
2248 * Makefile.in: Regenerate.
2250 2000-04-03 Denis Chertykov <denisc@overta.ru>
2252 * avr-dis.c: Syntax cleanup.
2253 (add0fff): Print the pc relative address as a signed number.
2254 (add03f8): Likewise.
2256 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2258 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2259 the parameter ATTRIBUTE_UNUSED.
2260 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2262 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2264 * m10300-opc.c: SP-based offsets are always unsigned.
2266 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2268 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2269 [branch always] instead of "undefined".
2271 2000-03-27 Nick Clifton <nickc@redhat.com>
2273 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2274 short instructions, from end of list of long instructions.
2276 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2278 * Makefile.am (CFILES): Add avr-dis.c.
2279 (ALL_MACHINES): Add avr-dis.lo.
2281 2000-03-27 Alan Modra <alan@linuxcare.com>
2283 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2285 (print_insn_avr): Call function via pointer in K&R compatible way.
2286 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2287 add0fff, add03f8): Convert to old style function declaration and
2289 (avrdis_opcode): Add prototype.
2291 2000-03-27 Denis Chertykov <denisc@overta.ru>
2293 * avr-dis.c: New file. AVR disassembler.
2294 * configure.in (bfd_avr_arch): New architecture support.
2295 * disassemble.c: Likewise.
2296 * configure: Regenerate.
2298 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2300 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2302 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2304 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2305 flag to determine if operand is pc-relative.
2307 (d30v_format_table):
2308 (REL6S3): Renamed from IMM6S3.
2309 Added flag OPERAND_PCREL.
2310 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2311 added flag OPERAND_PCREL.
2312 (IMM12S3U): Replaced with REL12S3.
2313 (SHORT_D2, LONG_D): Delay target is pc-relative.
2314 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2315 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2316 using the REL* operands.
2317 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2318 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2319 LONG_Db, using REL* operands.
2320 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2321 (d30v_opcode_table): Use new *r formats.
2323 2000-02-28 Nick Clifton <nickc@redhat.com>
2325 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2326 'signed_overflow_ok_p'.
2328 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2330 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2331 name of the libtool directory.
2332 * Makefile.in: Rebuild.
2334 2000-02-24 Nick Clifton <nickc@redhat.com>
2336 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2337 (cgen_clear_signed_overflow_ok): New function.
2338 (cgen_signed_overflow_ok_p): New function.
2340 2000-02-23 Andrew Haley <aph@redhat.com>
2342 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2343 m32r-ibld.c, m32r-opc.h: Rebuild.
2345 2000-02-23 Linas Vepstas <linas@linas.org>
2347 * i370-dis.c, i370-opc.c: New.
2349 * disassemble.c (ARCH_i370): Define.
2350 (disassembler): Handle it.
2352 * Makefile.am: Add support for Linux/IBM 370.
2353 * configure.in: Likewise.
2355 * Makefile.in: Regenerate.
2356 * configure: Likewise.
2358 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2360 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2361 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2364 2000-02-22 Andrew Haley <aph@redhat.com>
2366 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2368 * mips-opc.c (G6): New define.
2369 (mips_builtin_op): Add "move" definition for -gp32.
2371 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2373 From Grant Erickson <gerickso@Brocade.COM>:
2374 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2376 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2378 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2381 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2383 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2384 (print_insn_ppi): Likewise.
2385 (print_insn_shx): Use info->mach to select appropriate insn set.
2386 Add support for sh-dsp. Remove FD_REG_N support.
2387 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2388 (sh_arg_type): Likewise. Remove FD_REG_N.
2389 (sh_dsp_reg_nums): New enum.
2390 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2391 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2392 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2393 (arch_sh3_dsp_up): Likewise.
2394 (sh_opcode_info): New field: arch.
2395 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2396 D_REG_N. Fill in arch field. Add sh-dsp insns.
2398 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2400 * arm-dis.c: Change flavor name from atpcs-special to
2401 special-atpcs to prevent name conflict in gdb.
2402 (get_arm_regname_num_options, set_arm_regname_option,
2403 get_arm_regnames): New functions. API to access the several
2404 flavor of register names. Note: Used by gdb.
2405 (print_insn_thumb): Use the register name entry from the currently
2406 selected flavor for LR and PC.
2408 2000-02-10 Nick Clifton <nickc@redhat.com>
2410 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2412 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2413 "mulsh.h" instructions.
2414 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2416 (print_insn_mcore): Add support for little endian targets.
2417 Add support for MULSH and OPSR classes.
2419 2000-02-07 Nick Clifton <nickc@redhat.com>
2421 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2422 Previous delat did not take.
2424 2000-02-03 Timothy Wall <twall@redhat.com>
2426 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2427 to adjust target address bounds checking and calculate the
2428 appropriate octet offset into data.
2430 2000-01-27 Nick Clifton <nickc@redhat.com>
2432 * arm-dis.c: (parse_disassembler_option): Rename to
2433 parse_arm_disassembler_option and allow to be exported.
2435 * disassemble.c (disassembler_usage): New function: Print out any
2436 target specific disassembler options.
2437 Call arm_disassembler_options() if the ARM architecture is being
2440 * arm-dis.c (NUM_ELEM): Define this macro if not already
2442 (arm_regname): New struct type for ARM register names.
2443 (arm_toggle_regnames): Delete.
2444 (parse_disassembler_option): Use register name structure.
2445 (print_insn): New function: Combines duplicate code found in
2446 print_insn_big_arm and print_insn_little_arm.
2447 (print_insn_big_arm): Call print_insn.
2448 (print_insn_little_arm): Call print_insn.
2449 (print_arm_disassembler_options): Display list of supported,
2450 ARM specific disassembler options.
2452 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2454 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2455 ARM_STT_16BIT flag as Thumb code symbols.
2457 * arm-dis.c (printf_insn_little_arm): Ditto.
2459 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2461 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2462 of raw thumb instructions.
2464 2000-01-20 Nick Clifton <nickc@redhat.com>
2466 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2468 2000-01-03 Nick Clifton <nickc@cygnus.com>
2470 * arm-dis.c (streq): New macro.
2471 (strneq): New macro.
2472 (force_thumb): ew local variable.
2473 (parse_disassembler_option): New function: Parse a single, ARM
2474 specific disassembler command line switch.
2475 (parse_disassembler_option): Call parse_disassembler_option to
2476 parse individual command line switches.
2477 (print_insn_big_arm): Check force_thumb.
2478 (print_insn_little_arm): Check force_thumb.
2480 For older changes see ChangeLog-9899
2486 version-control: never
projects / deliverable / binutils-gdb.git / blob