opcodes/ChangeLog

   1 start-sanitize-r5900
   2 Tue Dec 16 13:24:22 1997  Jeffrey A Law  (law@cygnus.com)
   3
   4         * mips-opc.c: Add many missing r5900 instructions.
   5
   6 end-sanitize-r5900
   7 start-sanitize-r5900
   8 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
   9
  10         * d30v-opc.c (d30v_opcode_table): Set new flags bits
  11         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
  12
  13 end-sanitize-r5900
  14 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
  15
  16         * configure: Only build libopcodes shared if --enable-shared's value
  17         was `yes', or was set to `*opcodes*'.
  18         * aclocal.m4: Likewise.
  19
  20 start-sanitize-r5900
  21 Mon Dec 15 12:43:36 1997  Jeffrey A Law  (law@cygnus.com)
  22
  23         * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
  24 end-sanitize-r5900
  25 start-sanitize-tic80
  26 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
  27
  28         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
  29         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
  30         offset forms before the 15 bit forms, to default to the long forms.
  31
  32 end-sanitize-tic80
  33 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
  34
  35         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
  36
  37 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
  38
  39         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
  40         symbol if none is present.
  41         (print_insn_big_arm):  Prevent examination of stored symbol if
  42         none is present.
  43
  44 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
  45
  46         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
  47
  48 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
  49
  50         * disassemble.c: Remove disasm_symaddr() function.
  51
  52         * arm-dis.c: Use info->symbol instead of info->flags to determine
  53         if disassmbly should be in Thumb or Arm mode.
  54
  55 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
  56
  57         * arm-dis.c: Add support for disassembling Thumb opcodes.
  58         (print_insn_thumb): New function.
  59
  60         * disassemble.c (disasm_symaddr): New function.
  61
  62         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
  63         (thumb_opcodes): Table of Thumb opcodes.
  64
  65 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
  66
  67         * m68k-opc.c (btst): Change Dd@s to Dd;b.
  68
  69         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
  70         and 'v' as operand types.
  71
  72 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
  73
  74         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
  75         <olivier.carmona@di.epfl.ch>.
  76         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
  77         which has a two word opcode with a one word argument.
  78
  79 start-sanitize-d30v
  80 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
  81
  82         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
  83         unsigned, not signed.
  84         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
  85
  86 end-sanitize-d30v
  87 start-sanitize-sh4
  88 Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>
  89
  90         * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
  91         * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
  92         (ftrv): Slay the cut-and-paste monster.
  93
  94 end-sanitize-sh4
  95 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
  96
  97         * d10v-dis.c (print_operand):
  98         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
  99
 100 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
 101
 102         * d10v-opc.c (OPERAND_FLAG): Split into:
 103         (OPERAND_FFLAG, OPERAND_CFLAG) .
 104         (FSRC): Split into:
 105         (FFSRC, CFSRC).
 106
 107 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
 108
 109         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
 110         field for all INSN_MACRO's.
 111         * mips16-opc.c: same
 112
 113 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
 114
 115         * mips-opc.c (sync,cache): These are 3900 insns.
 116
 117 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 118
 119         sh-opc.h (sh_table): Remove ftst/nan.
 120
 121 start-sanitize-vr5400
 122 Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>
 123
 124         * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
 125         (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
 126         last.
 127         * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
 128
 129 end-sanitize-vr5400
 130 start-sanitize-tx49
 131 Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>
 132
 133         * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
 134         Add tx49 insns and configury.
 135
 136 end-sanitize-tx49
 137 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
 138
 139         * mips-opc.c (ffc, ffs): Fix mask.
 140
 141 start-sanitize-d30v
 142 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
 143
 144         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
 145         control registers.
 146
 147 end-sanitize-d30v
 148 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 149
 150         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 151 start-sanitize-vr5400
 152         Added VR5400 instructions.
 153         (N5): New cpu-id macro.
 154 end-sanitize-vr5400
 155         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 156
 157 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 158
 159         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 160         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 161
 162 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
 163
 164         * v850-dis.c (disassemble): Replace // with /* ... */
 165
 166 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
 167
 168         * sparc-opc.c: Add wr & rd for v9a asr's.
 169         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
 170         (v9a_asr_reg_names): New variable.
 171         Patch from David Miller <davem@vger.rutgers.edu>.
 172
 173 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
 174
 175         * sparc-opc.c (v9notv9a): New insn type.
 176         (IMPDEP): Move to the end to not conflict with edge8 et al.
 177         Patch from David Miller <davem@vger.rutgers.edu>.
 178
 179 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
 180
 181         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
 182
 183 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
 184
 185         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
 186
 187 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
 188
 189         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
 190         of disassemble_info structure to determine if an overlay address
 191         has a matching symbol in low memory.
 192
 193         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
 194         new symbol_at_address_func field in disassemble_info structure.
 195
 196 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
 197
 198         * v850-opc.c (extract_d22): Use signed arithmatic.
 199
 200 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
 201
 202         * mips-opc.c: Three op mult is not an ISA insn.
 203
 204 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
 205
 206         * mips-opc.c: Fix formatting.
 207
 208 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
 209
 210         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
 211         than assuming that char is signed.  Explicitly sign extend 16 bit
 212         values, rather than assuming that short is 16 bits.
 213         (OP_sI, OP_J, OP_DIR): Likewise.
 214
 215 start-sanitize-v850e
 216 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
 217
 218         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
 219         system registers.
 220
 221 end-sanitize-v850e
 222 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
 223
 224         * v850-opc.c: Fix typo in comment.
 225
 226         * v850-dis.c (disassemble): Add test of processor type when
 227         determining opcodes.
 228
 229 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 230
 231         * configure.in: Use a diversion to set enable_shared before the
 232         arguments are parsed.
 233         * configure: Rebuild.
 234
 235 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 236
 237         * m68k-opc.c (TBL1): Use ! rather than `.
 238         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
 239
 240 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
 241
 242         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
 243
 244         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
 245
 246         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
 247         for mcf5200.
 248
 249         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
 250         * aclocal.m4: Rebuild with new libtool.
 251         * configure: Rebuild.
 252
 253 start-sanitize-v850e
 254 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 255
 256         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
 257
 258 end-sanitize-v850e
 259 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
 260
 261         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
 262
 263 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
 264
 265         * v850-opc.c (v850_opcodes): Further rearrangements.
 266
 267 start-sanitize-d30v
 268 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
 269
 270         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
 271
 272 end-sanitize-d30v
 273 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
 274
 275         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
 276         parser to work.
 277
 278 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
 279
 280         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
 281 start-sanitize-tx19
 282         * mips16-opc.c: Added mips16 sdbbp.
 283 end-sanitize-tx19
 284
 285 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
 286
 287         * v850-opc.c: Initialise processors field of v850_opcode structure.
 288
 289 start-sanitize-d30v
 290 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
 291
 292         Merge changes from Martin Hunt:
 293
 294         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
 295
 296         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
 297         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
 298         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
 299
 300         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
 301
 302         * d30v-dis.c (print_insn): First operand of d*i (delayed
 303         branch) instructions is relative.
 304
 305         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
 306         (d30v_operand_table): Add IMM6S3 type.
 307         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
 308
 309         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
 310         and cmp instructions.
 311
 312         * d30v-opc.c: Correct entries for repeat*, and sat*.
 313         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
 314         types. Correct several formats.
 315
 316         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
 317
 318         * d30v-opc.c (pre_defined_registers): Change control registers.
 319
 320         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
 321         SHORT_C2.  Manual was incorrect.
 322
 323         * d30v-dis.c (lookup_opcode):  Return value now indicates
 324         if an opcode has a short and a long form.  Used for deciding
 325         to append a ".s" or ".l".
 326         (print_insn): Append a ".s" to an instruction if it is
 327         the short form and ".l" if it is a long form. Do not append
 328         anything if the instruction has only one possible size.
 329
 330         * d30v-opc.c: Change mulx2h to require an even register.
 331         New form: SHORT_A2; a SHORT_A form that needs an even
 332         register as the first operand.
 333
 334         * d30v-dis.c (print_insn_d30v): Fix problem where the last
 335         instruction was not being disassembled if there were an odd
 336         number of instructions.
 337
 338         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
 339
 340 end-sanitize-d30v
 341 start-sanitize-v850e
 342 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
 343
 344         * v850-dis.c (disassemble): Improved display of register lists.
 345
 346 end-sanitize-v850e
 347 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
 348
 349         * sparc-opc.c (sparc_opcodes): Fix assembler args to
 350         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
 351         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
 352         fandnot1s, fandnot2s.
 353
 354 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
 355
 356         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
 357
 358 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
 359
 360         * cgen-asm.c (cgen_parse_address): New argument resultp.
 361         All callers updated.
 362         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
 363
 364 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
 365
 366         * mn10200-dis.c (disassemble): PC relative instructions are
 367         relative to the next instruction, not the current instruction.
 368
 369 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
 370
 371         * v850-dis.c (disassemble): Only signed extend values that are not
 372         returned by extract functions.
 373         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
 374
 375 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
 376
 377         * v850-opc.c: Update comments.  Remove use of
 378         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
 379
 380 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
 381
 382         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
 383
 384 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
 385
 386         * configure: Rebuilt with latest devo autoconf for NT support.
 387
 388 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
 389
 390         * v850-dis.c (disassemble): Use curly brace syntax for register
 391         lists.
 392
 393         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
 394         where r0 is being used as a destination register.
 395
 396 start-sanitize-v850e
 397 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
 398
 399         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
 400 end-sanitize-v850e
 401
 402 start-sanitize-sh4
 403 Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 404
 405         * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
 406         (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
 407         (sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
 408         Add insns to access SGR and DBR.
 409         * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
 410
 411 end-sanitize-sh4
 412 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
 413
 414         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
 415
 416 start-sanitize-v850e
 417 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
 418
 419         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
 420         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
 421         opcodes..
 422
 423 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 424
 425         * configure (cgen_files): Add support for v850e target.
 426         * configure.in (cgen_files):  Add support for v850e target.
 427
 428 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 429
 430         * configure (cgen_files): Add support for v850ea target.
 431         * configure.in (cgen_files):  Add support for v850ea target.
 432 end-sanitize-v850e
 433
 434 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
 435
 436         * configure.in (bfd_arc_arch): Add.
 437         * configure: Rebuild.
 438         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
 439         * Makefile.in: Rebuild.
 440         * arc-dis.c, arc-opc.c: New files.
 441         * disassemble.c (ARCH_all): Define ARCH_arc.
 442         (disassembler): Add ARC support.
 443
 444 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
 445
 446 start-sanitize-v850e
 447         * v850-dis.c (disassemble): Add support for v850EA instructions.
 448
 449         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
 450         (v850_opcodes): Add v850EA instructions.
 451
 452         * v850-dis.c (disassemble): Add support for v850E instructions.
 453
 454         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
 455         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
 456         insert_spe, extract_spe): New Functions.
 457         (v850_opcodes): Add v850E instructions.
 458 end-sanitize-v850e
 459
 460         * v850-opc.c: Reorganised and re-layed out to improve readability
 461         and portability.
 462
 463 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
 464
 465         * configure: Rebuild with autoconf 2.12.1.
 466
 467 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 468
 469         * aclocal.m4, configure: Rebuild with new automake patches.
 470
 471 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
 472
 473         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
 474         * acinclude.m4: Just include acinclude.m4 from BFD.
 475         * aclocal.m4, configure: Rebuild.
 476
 477 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
 478
 479         * Makefile.am: New file, based on old Makefile.in.
 480         * acconfig.h: New file.
 481         * acinclude.m4: New file.
 482         * stamp-h.in: New file.
 483         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
 484         Removed shared library handling; now handled by libtool.  Replace
 485         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
 486         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
 487         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
 488         handling in AC_OUTPUT.
 489         * dep-in.sed: Change .o to .lo.
 490         * Makefile.in: Now built with automake.
 491         * aclocal.m4: Now built with aclocal.
 492         * config.in, configure: Rebuild.
 493
 494 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
 495
 496         * mips-opc.c: Fix typo/thinko in "eret" instruction.
 497
 498 start-sanitize-r5900
 499 Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 500
 501         * mips-opc.c: Fix coding of mtsa.
 502
 503 end-sanitize-r5900
 504 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
 505
 506         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
 507         Make array const.
 508         * sparc-dis.c (sorted_opcodes): New static local.
 509         (struct opcode_hash): `opcode' is pointer to const element.
 510         (build_hash): First arg is now table of sorted pointers.
 511         (print_insn_sparc): Sort opcodes by sorting table of pointers.
 512         (compare_opcodes): Update.
 513
 514 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
 515
 516         * cgen-opc.c: #include <ctype.h>.
 517         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
 518         Handle case insensitive hashing.
 519         (hash_keyword_value): Change type of `value' to unsigned int.
 520
 521 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
 522
 523         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
 524         precision FP, mark it as such.  Likewise for double precision
 525         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
 526         possible.
 527 start-sanitize-r5900
 528         (mips_builtin_opcodes): Remove non-existant r5900 instructions
 529 end-sanitize-r5900
 530
 531 start-sanitize-r5900
 532 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
 533
 534         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
 535         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
 536
 537 end-sanitize-r5900
 538 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
 539
 540         * ppc-opc.c (extract_nsi): make unsigned expression signed before
 541         negating it.
 542         (UNUSED): remove one level of parens, so MSVC doesn't choke on
 543         nesting depth when all the macros are expanded.
 544
 545 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
 546
 547         * sparc-opc.c: The fcmp v9a instructions take an integer register
 548         as a destination, not a floating point register.  From Christian
 549         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
 550
 551 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
 552
 553         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
 554         syntax.  From Roman Hodek
 555         <rnhodek@faui22c.informatik.uni-erlangen.de>.
 556
 557         * i386-dis.c (twobyte_has_modrm): Fix pand.
 558
 559 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
 560
 561         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
 562
 563 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
 564
 565         * arm-dis.c: Add prototypes for arm_decode_shift and
 566         print_insn_arm.
 567
 568 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
 569
 570         * mips-opc.c: Add r3900 insns.
 571
 572 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
 573
 574         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
 575         print delay slot instructions on the same line.  When using a PC
 576         relative load, add a comment with the value being loaded if it can
 577         be obtained.
 578
 579 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
 580
 581         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
 582         to pushS/popS for segment regs and byte constant so that
 583         pushw/popw printed when in 16 bit data mode.
 584
 585         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
 586         print cbtw, cwtd in 16 bit data mode.
 587         * i386-dis.c (putop): extra case W to support above.
 588
 589         * i386-dis.c (print_insn_x86): print addr32 prefix when given
 590         address size prefix in 16 bit address mode.
 591
 592 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
 593
 594         * sh-dis.c: Reindent.  Rename local variable fprintf to
 595         fprintf_fn.
 596
 597 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
 598
 599         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
 600
 601 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
 602
 603         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
 604           field membership.
 605         * mips16-opc.c (mip16_opcodes): same.
 606
 607 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
 608
 609         * m68k-opc.c (moveb): Change $d to %d.
 610
 611 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
 612
 613         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
 614         (twobyte_has_modrm): Likewise.
 615         (grps): Likewise.
 616         (OP_MMX, OP_EM, OP_MS): New static functions.
 617
 618         * i386-dis.c: Revert patch of April 4.  The output now matches
 619         what gcc generates.
 620
 621 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
 622
 623         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
 624         of $simm16.
 625
 626 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
 627
 628         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
 629
 630 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
 631
 632         * Makefile.in (install): Depend upon installdirs.
 633         (installdirs): New target.
 634
 635 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
 636
 637         From Thomas Graichen <graichen@rzpd.de>:
 638         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
 639         * configure: Rebuild.
 640
 641 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
 642
 643         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
 644         Delete string{,s}.h support.
 645
 646 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
 647
 648         * cgen-asm.c (cgen_parse_operand_fn): New global.
 649         (cgen_parse_{{,un}signed_integer,address}): Update call to
 650         cgen_parse_operand_fn.
 651         (cgen_init_parse_operand): New function.
 652         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
 653         from cgen_asm_init_parse.
 654         (m32r_cgen_assemble_insn): New operand `errmsg'.
 655         Delete call to as_bad, return error message to caller.
 656         (m32r_cgen_asm_hash_keywords): #if 0 out.
 657
 658 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 659
 660         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
 661         not data register.
 662         [case 'J']: Fix typo in register name.
 663
 664 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
 665
 666         * configure.in: Substitute SHLIB_LIBS.
 667         * configure: Rebuild.
 668         * Makefile.in (SHLIB_LIBS): New variable.
 669         ($(SHLIB)): Use $(SHLIB_LIBS).
 670
 671 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
 672
 673         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
 674
 675         * cgen-opc.c (hash_keyword_name): Improve algorithm.
 676
 677         * disassemble.c (disassembler): Handle m32r.
 678
 679 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
 680
 681         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
 682         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
 683         * Makefile.in (CFILES): Add them.
 684         (ALL_MACHINES): Add them.
 685         (dependencies): Regenerate.
 686         * configure.in (cgen_files): New variable.
 687         (bfd_m32r_arch): Add entry.
 688         * configure: Regenerate.
 689
 690 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 691
 692         * configure.in: Correct file names for bfd_mn10[23]00_arch.
 693         * configure: Rebuild.
 694
 695         * Makefile.in: Rebuild dependencies.
 696
 697         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
 698
 699         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
 700         fdivp.
 701
 702 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
 703
 704         * Branched binutils 2.8.
 705
 706 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
 707
 708         * m10200-dis.c: Rename from mn10200-dis.c.
 709         * m10200-opc.c: Rename from mn10200-opc.c.
 710         * m10300-dis.c: Rename from mn10300-dis.c
 711         * m10300-opc.c: Rename from mn10300-opc.c.
 712         * Makefile.in: Update accordingly.
 713
 714         * mips16-opc.c: Add mul and dmul macros.
 715
 716 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
 717
 718         * makefile.vms: Update CFLAGS, add clean target.
 719
 720 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
 721
 722         * mips-opc.c: Add "wait".  From Ralf Baechle
 723         <ralf@gnu.ai.mit.edu>.
 724
 725         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
 726         * configure, config.in: Rebuild.
 727         * sysdep.h: Include <stdlib.h> if it exists.
 728         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
 729         <string.h>.
 730         * Makefile.in: Rebuild dependencies.
 731
 732 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 733
 734         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
 735         Andrew Bray <andy@madhouse.demon.co.uk>.
 736
 737         * mips-opc.c: Add cast when setting mips_opcodes.
 738
 739 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
 740
 741         * v850-dis.c (disassemble):  Fix sign extension problem.
 742         * v850-opc.c (extract_d*):  Fix sign extension problems to make
 743         disassembly calculate branch offsets correctly.
 744
 745 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
 746
 747         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
 748
 749         * mips-opc.c: Add dctr and dctw.
 750
 751 start-sanitize-d30v
 752 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 753
 754         * d30v-dis.c (print_insn): Change the way signed constants
 755         are displayed.
 756 end-sanitize-d30v
 757 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
 758
 759         * Makefile.in (BFD_H): New variable.
 760         (HFILES): New variable.
 761         (CFILES): Add all C files.
 762         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
 763         Delete old dependencies, and build new ones.
 764         * dep-in.sed: New file.
 765
 766 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 767
 768         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
 769
 770 start-sanitize-coldfire
 771 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
 772
 773         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
 774         instructions.
 775
 776 end-sanitize-coldfire
 777 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
 778
 779         * mn10200-opc.c: Change "trap" to "syscall".
 780         * mn10300-opc.c: Add new "syscall" instruction.
 781
 782 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
 783
 784         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
 785         mulul insns on the coldfire.
 786
 787 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
 788
 789         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
 790         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
 791         (print_insn_little_arm): Likewise.
 792
 793 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 794
 795         Based on patches from H.J. Lu <hjl@lucon.org>:
 796         * i386-dis.c (fetch_data): Add prototype.
 797         * m68k-dis.c (fetch_data): Add prototype.
 798         (dummy_print_address): Add prototype.  Make static.
 799         * ppc-opc.c (valid_bo): Add prototype.
 800         * sparc-dis.c (build_hash_table): Add prototype.
 801         (is_delayed_branch, compute_arch_mask): Add prototypes.
 802         (print_insn_sparc): Make several local variables const.
 803         (compare_opcodes): Change arguments to const PTR.  Add prototype.
 804         * sparc-opc.c (arg): Change name field to be const.
 805         (lookup_name, lookup_value): Add prototypes.  Change table and
 806         name parameters to be const.
 807         (sparc_encode_asi): Change name parameter to be const.
 808         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
 809         (sparc_encode_sparclet_cpreg): Likewise.
 810         (sparc_decode_asi): Change return type to be const.
 811         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
 812         (sparc_decode_sparclet_cpreg): Likewise.
 813
 814 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
 815
 816         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
 817         Solaris doesn't like the combined options, and the -f is
 818         unnecessary.
 819         (stamp-tshlink, install): Likewise.
 820
 821 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
 822
 823         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
 824         as relaxable.
 825
 826 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
 827
 828         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
 829
 830 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
 831
 832         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
 833         the mc68000.
 834
 835 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 836
 837         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
 838
 839 start-sanitize-tic80
 840 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
 841
 842         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
 843
 844 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
 845
 846         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
 847
 848 end-sanitize-tic80
 849 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 850
 851         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
 852         floatformat_to_double to make portable.
 853         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
 854         precision float.
 855
 856 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
 857
 858         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
 859         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
 860
 861 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 862
 863         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
 864         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
 865
 866 start-sanitize-tic80
 867 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
 868
 869         * tic80-opc.c (LSI_SCALED): Renamed from this ...
 870         (OFF_SL_BR_SCALED): ... to this, and added the flag
 871         TIC80_OPERAND_BASEREL to the flags word.
 872         (tic80_opcodes): Replace all occurances of LSI_SCALED with
 873         OFF_SL_BR_SCALED.
 874
 875 end-sanitize-tic80
 876 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
 877
 878         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
 879         Change mips_opcodes from const array to a pointer,
 880         and change bfd_mips_num_opcodes from const int to int,
 881         so that we can increase the size of the mips opcodes table
 882         dynamically.
 883
 884 start-sanitize-tic80
 885 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
 886
 887         * tic80-opc.c (tic80_predefined_symbols): Revert change to
 888         store BITNUM values in the table in one's complement form
 889         to match behavior when assembler is given a raw numeric
 890         value for a BITNUM operand.
 891         * tic80-dis.c (print_operand_bitnum): Ditto.
 892
 893 end-sanitize-tic80
 894 start-sanitize-d30v
 895 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 896
 897         * d30v-opc.c: Removed references to FLAG_X.
 898
 899 end-sanitize-d30v
 900 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 901
 902         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
 903
 904 start-sanitize-d30v
 905 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 906
 907         * Makefile.in: Added d30v object files.
 908         * configure: (bfd_d30v_arch) Rebuilt.
 909         * configure.in: (bfd_d30v_arch) Added new case.
 910         * d30v-dis.c: New file.
 911         * d30v-opc.c: New file.
 912         * disassemble.c (disassembler) Add entry for d30v.
 913
 914 end-sanitize-d30v
 915 start-sanitize-tic80
 916 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
 917
 918         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
 919         representations for the floating point BITNUM values.
 920
 921 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
 922
 923         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
 924         in the table in one's complement form, as they appear in the
 925         actual instruction.
 926         (tic80_symbol_to_value): Use macros to access predefined
 927         symbol fields.
 928         (tic80_value_to_symbol): Ditto.
 929         (tic80_next_predefined_symbol): New function.
 930         * tic80-dis.c (print_operand_bitnum): Remove code that did
 931         one's complement for BITNUM values.
 932
 933 end-sanitize-tic80
 934 start-sanitize-r5900
 935 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
 936
 937         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
 938
 939 end-sanitize-r5900
 940 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
 941
 942         * makefile.vms: Remove 8 bit characters.  Update to latest
 943         gcc release.
 944
 945 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 946
 947         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
 948
 949 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
 950
 951         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
 952         (IMM24_PCREL): Likewise.
 953
 954 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 955
 956         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
 957         address for an extended PC relative instruction that is not a
 958         branch.
 959
 960 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 961
 962         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
 963         bytes_per_line.
 964
 965 start-sanitize-tic80
 966 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
 967
 968         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
 969         (tic80_opcodes): Sort entries so that long immediate forms
 970         come after short immediate forms, making it easier for
 971         assembler to select the right one for a given operand.
 972
 973 end-sanitize-tic80
 974 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
 975
 976         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
 977         display_endian.
 978         (print_insn_mips16): Likewise.
 979
 980 start-sanitize-r5900
 981 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
 982
 983         * mips-opc.c: add r5900.
 984
 985 end-sanitize-r5900
 986 start-sanitize-tic80
 987 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
 988
 989         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
 990         a symbol class that restricts translation to just that
 991         class (general register, condition code, etc).
 992
 993 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
 994
 995         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
 996         and REG_DEST_E for register operands that have to be
 997         an even numbered register.  Add REG_FPA for operands that
 998         are one of the floating point accumulator registers.
 999         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1000         (tic80_opcodes): Change entries that need even numbered
1001         register operands to use the new operand table entries.
1002         Add "or" entries that are identical to "or.tt" entries.
1003
1004 end-sanitize-tic80
1005 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
1006
1007         * mips16-opc.c: Add new cases of exit instruction for
1008         disassembler.
1009         * mips-dis.c (print_mips16_insn_arg): Display floating point
1010         registers in operands of exit instruction.  Print `$' before
1011         register names in operands of entry and exit instructions.
1012
1013 start-sanitize-tic80
1014 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
1015
1016         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1017         pairs for all predefined symbols recognized by the assembler.
1018         Also used by the disassembling routines.
1019         (tic80_symbol_to_value): New function.
1020         (tic80_value_to_symbol): New function.
1021         * tic80-dis.c (print_operand_control_register,
1022         print_operand_condition_code, print_operand_bitnum):
1023         Remove private tables and use tic80_value_to_symbol function.
1024
1025 end-sanitize-tic80
1026 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1027
1028         * d10v-dis.c (print_operand): Change address printing
1029         to correctly handle PC wrapping.  Fixes PR11490.
1030
1031 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
1032
1033         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1034         branches relaxable.
1035
1036 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
1037
1038         * mips-dis.c (print_insn_mips16): Set insn_info information.
1039         (print_mips16_insn_arg): Likewise.
1040
1041         * mips-dis.c (print_insn_mips16): Better handling of an extend
1042         opcode followed by an instruction which can not be extended.
1043
1044 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
1045
1046         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1047         coldfire moveb instruction to not allow an address register as
1048         destination.  Although the documentation does not indicate that
1049         this is invalid, experiments uncovered unexpected behavior.
1050         Added a comment explaining the situation.  Thanks to Andreas
1051         Schwab for pointing this out to me.
1052
1053 start-sanitize-tic80
1054 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
1055
1056         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1057         entries are presorted so that entries with the same mnemonic are
1058         adjacent to each other in the table.  Sort the entries for each
1059         instruction so that this is true.
1060
1061 end-sanitize-tic80
1062 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1063
1064         * m68k-dis.c: Include <libiberty.h>.
1065         (print_insn_m68k): Sort the opcode table on the most significant
1066         nibble of the opcode.
1067
1068 start-sanitize-tic80
1069 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
1070
1071         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1072         "vsub", "vst", "xnor", and "xor" instructions.
1073         (V_a1): Renamed from V_a, msb of accumulator reg number.
1074         (V_a0): Add macro, lsb of accumulator reg number.
1075
1076 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
1077
1078         * tic80-dis.c (print_insn_tic80): Broke excessively long
1079         function up into several smaller ones and arranged for
1080         the instruction printing function to be callable recursively
1081         to print vector instructions that have both a load and a
1082         math instruction packed into a single opcode.
1083         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1084         to explain why it comes after the other vector opcodes.
1085
1086 end-sanitize-tic80
1087 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
1088
1089         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1090         move insns to handle immediate operands.
1091
1092 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1093
1094         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1095         fix operand mask in the "moveml" entries for the coldfire.
1096
1097 start-sanitize-tic80
1098 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
1099
1100         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1101         New macros for building vector instruction opcodes.
1102         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1103         FMT_LI, which were unused.  The field is now a flags field.
1104         Remove some opcodes that are possible, but illegal, such
1105         as long immediate instructions with doubles for immediate
1106         values.  Add "vadd" and "vld" instructions.
1107
1108 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
1109
1110         * tic80-opc.c (tic80_operands): Reorder some table entries to make
1111         the order more logical.  Move the shift alias instructions ("rotl",
1112         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1113         interspersed with the regular sr.x and sl.x instructions.  Add
1114         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1115         "sub", "subu", "swcr", and "trap".
1116
1117 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
1118
1119         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1120         (OFF_SL_PC): Renamed from OFF_SL.
1121         (OFF_SS_BR): New operand type for base relative operand.
1122         (OFF_SL_BR): New operand type for base relative operand.
1123         (REG_BASE): New operand type for base register operand.
1124         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1125         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1126         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1127         instructions.
1128         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1129         10 char field, padded with spaces on rhs, rather than a string
1130         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
1131         than old TIC80_OPERAND_RELATIVE.  Add support for new
1132         TIC80_OPERAND_BASEREL flag bit.
1133
1134 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
1135
1136         * tic80-dis.c (print_insn_tic80): Print floating point operands
1137         as floats.
1138         * tic80-opc.c (SPFI): Add single precision floating point
1139         immediate operand type.
1140         (ROTATE): Add rotate operand type for shifts.
1141         (ENDMASK): Add for shifts.
1142         (n): Macro for the 'n' bit.
1143         (i): Macro for the 'i' bit.
1144         (PD): Macro for the 'PD' field.
1145         (P2): Macro for the 'P2' field.
1146         (P1): Macro for the 'P1' field.
1147         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1148         "fcmp", and "fdiv".
1149
1150 end-sanitize-tic80
1151 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
1152
1153         * mn10200-dis.c (disassemble): Mask off unwanted bits after
1154         adding in current address for pc-relative operands.
1155
1156 start-sanitize-tic80
1157 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
1158
1159         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1160         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1161         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1162         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1163         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1164         REG_BASE_M_SI, REG_BASE_M_LI respectively.
1165         (REG_SCALED, LSI_SCALED): New operand types.
1166         (E): New macro for 'E' bit at bit 27.
1167         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1168         opcodes, including the various size flavors (b,h,w,d) for
1169         the direct load and store instructions.
1170
1171 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
1172
1173         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1174         in an instruction.
1175         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1176         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1177         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1178         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1179         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1180         masks with "MASK_* & ~M_*" to get the M bit reset.
1181         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1182
1183 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
1184
1185         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1186         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
1187         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1188         form.
1189         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1190         CC, SICR, and LICR table entries.
1191         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1192         "bcnd", and "brcr" opcodes.
1193
1194 end-sanitize-tic80
1195 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
1196
1197         * ppc-opc.c (powerpc_operands): Make comment match the
1198         actual fields (no shift field).
1199         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1200 start-sanitize-tic80
1201         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1202         partial implementation, work in progress.
1203         * tic80-opc.c (tic80_operands): Begin construction operands table.
1204         (tic80_opcodes): Continue populating opcodes table and start
1205         filling in the operand indices.
1206         (tic80_num_opcodes): Add this.
1207 end-sanitize-tic80
1208
1209 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
1210
1211         * m68k-opc.c: Add #B case for moveq.
1212
1213 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
1214
1215         * mn10300-dis.c (disassemble): Make sure all variables are initialized
1216         before they are used.
1217
1218 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
1219
1220         * v850-opc.c (v850_opcodes): Put curly-braces around operands
1221         for "breakpoint" instruction.
1222
1223 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
1224
1225         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1226         (dep): Use ALL_CFLAGS rather than CFLAGS.
1227
1228 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1229
1230         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1231         flag.
1232
1233 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
1234
1235         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1236 start-sanitize-tic80
1237         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1238 end-sanitize-tic80
1239
1240 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1241
1242         * mips16-opc.c: Add "abs".
1243
1244 start-sanitize-tic80
1245 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
1246
1247         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1248         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1249         (disassembler): Add bfd_arch_tic80 support to set disassemble
1250         to print_insn_tic80.
1251         * tic80-dis.c (print_insn_tic80): Add stub.
1252
1253 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
1254
1255         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1256         * configure: Regenerate with autoconf.
1257         * tic80-dis.c: Add file.
1258         * tic80-opc.c: Add file.
1259
1260 end-sanitize-tic80
1261 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1262
1263         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
1264
1265 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
1266
1267         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1268         (mn10200_opcodes): Use it for some logicals and btst insns.
1269         Add "break" and "trap" instructions.
1270
1271         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1272
1273         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1274
1275 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1276
1277         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1278         relative load or add now depends upon whether the instruction is
1279         in a delay slot.
1280
1281 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
1282
1283         * mn10200-dis.c: Finish writing disassembler.
1284         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1285         Fix mask for "jmp (an)".
1286
1287         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1288         handle endianness issues for mn10300.
1289
1290         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1291
1292 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
1293
1294         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1295         instruction.  Fix opcode field for "movb (imm24),dn".
1296
1297         * mn10200-opc.c (mn10200_operands): Fix insertion position
1298         for DI operand.
1299
1300 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
1301
1302         * mn10200-opc.c: Create mn10200 opcode table.
1303         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
1304         but moving along nicely.
1305
1306 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1307
1308         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
1309
1310 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
1311
1312         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1313         specifiers for fmovem* instructions.
1314
1315 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1316
1317         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1318
1319 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
1320
1321         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1322         with dsrl.
1323
1324 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1325
1326         * mn10300-opc.c: Add some comments explaining the various
1327         operands and such.
1328
1329         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1330
1331 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1332
1333         * m68k-dis.c (print_insn_arg): Handle new < and > operand
1334         specifiers.
1335
1336         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1337         operand specifiers in fmovm* instructions.
1338
1339 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
1340
1341         * ppc-opc.c (insert_li): Give an error if the offset has the two
1342         least significant bits set.
1343
1344 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1345
1346         * mips-dis.c (print_insn_mips16): Separate the instruction from
1347         the arguments with a tab, not a space.
1348
1349 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
1350
1351         * mn10300-dis.c (disasemble): Finish conversion to '$' as
1352         register prefix.
1353
1354         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1355         mov am,(imm32,sp).
1356
1357 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
1358
1359         * configure: Rebuild with autoconf 2.12.
1360
1361         Add support for mips16 (16 bit MIPS implementation):
1362         * mips16-opc.c: New file.
1363         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1364         (mips16_reg_names): New static array.
1365         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1366         after seeing a 16 bit symbol.
1367         (print_insn_little_mips): Likewise.
1368         (print_insn_mips16): New static function.
1369         (print_mips16_insn_arg): New static function.
1370         * mips-opc.c: Add jalx instruction.
1371         * Makefile.in (mips16-opc.o): New target.
1372         * configure.in: Use mips16-opc.o for bfd_mips_arch.
1373         * configure: Rebuild.
1374
1375 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
1376
1377         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1378         operand specifiers in *save, *restore and movem* instructions.
1379
1380         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1381         the coldfire.
1382
1383         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1384         register operands for immediate arithmetic, not, neg, negx, and
1385         set according to condition instructions.
1386
1387         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1388         specifier of the effective-address operand in immediate forms of
1389         arithmetic instructions.  The specifier for the immediate operand
1390         notes how and where the constant will be stored.
1391
1392 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
1393
1394         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1395         opcode.
1396
1397         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1398         register prefix.
1399
1400         * mn10300-dis.c (disassemble): Prefix registers with '%'.
1401
1402 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
1403
1404         * mn10300-dis.c (disassemble): Handle register lists.
1405
1406         * mn10300-opc.c: Fix handling of register list operand for
1407         "call", "ret", and "rets" instructions.
1408
1409         * mn10300-dis.c (disassemble): Print PC-relative and memory
1410         addresses symbolically if possible.
1411         * mn10300-opc.c: Distinguish between absolute memory addresses,
1412         pc-relative offsets & random immediates.
1413
1414         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1415         in 7 byte insns.
1416         (disassemble): Handle SPLIT and EXTENDED operands.
1417
1418 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
1419
1420         * mn10300-dis.c: Rough cut at printing some operands.
1421
1422         * mn10300-dis.c: Start working on disassembler support.
1423         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1424
1425         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1426         list.
1427         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1428
1429 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1430
1431         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1432
1433 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
1434
1435         * mn10300-opc.c (mn10300_opcodes): Demand parens around
1436         register argument is calls and jmp instructions.
1437
1438 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
1439
1440         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1441         getx operand.  Fix opcode for mulqu imm,dn.
1442
1443 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
1444
1445         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1446         in MN10300_OPERAND_SPLIT operands for how many bits
1447         appear in the basic insn word.  Add IMM32_HIGH24,
1448         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1449         (mn10300_opcodes): Use new operands as needed.
1450
1451         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1452         for bset, bclr, btst instructions.
1453         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1454
1455         * mn10300-opc.c (mn10300_operands): Remove many redundant
1456         operands.  Update opcode table as appropriate.
1457         (IMM32): Add MN10300_OPERAND_SPLIT flag.
1458         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1459
1460 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
1461
1462         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1463         operands (for indexed load/stores).  Fix bitpos for DI
1464         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1465         few instructions that insert immediates/displacements in the
1466         middle of the instruction.  Add IMM8E for 8 bit immediate in
1467         the extended part of an instruction.
1468         (mn10300_operands): Use new opcodes as appropriate.
1469
1470 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1471
1472         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1473         sequential so the assembler never parallelizes it with
1474         other instructions.
1475
1476 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
1477
1478         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1479         a data/address register that appears in register field 0
1480         and register field 1.
1481         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1482
1483 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
1484
1485         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1486         standard disassembly.
1487
1488         * alpha-opc.c (alpha_operands): Rearrange flags slot.
1489         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1490         Recategorize PALcode instructions.
1491
1492 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
1493
1494         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1495
1496 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
1497
1498         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1499         there are no operand types.
1500
1501 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
1502
1503         * v850-opc.c (D9_RELAX): Renamed from D9, all references
1504         changed.
1505         (v850_operands): Make sure D22 immediately follows D9_RELAX.
1506
1507 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
1508
1509         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1510
1511 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
1512
1513         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1514         and sst.w instructions.
1515
1516         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1517         "bCC"instructions).
1518
1519 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1520
1521         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1522         and the arguments.
1523
1524 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
1525
1526         * ppc-opc.c (PPCPWR2): Define.
1527         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1528         it.
1529
1530 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
1531
1532         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1533         field for movhu instruction.
1534
1535         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1536         cast value to "long" not "signed long" to keep hpux10
1537         compiler quiet.
1538
1539 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
1540
1541         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1542         for mov (abs16),DN.
1543
1544         * mn10300-opc.c (FMT*): Remove definitions.
1545
1546         * mn10300-opc.c (mn10300_opcodes): Fix destination register
1547         for shift-by-register opcodes.
1548
1549         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1550         into [AD][MN][01] for encoding the position of the register
1551         in the opcode.
1552
1553 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
1554
1555         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1556         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1557
1558 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
1559
1560         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1561         Fix various typos.  Add "PAREN" operand.
1562         (MEM, MEM2): Define.
1563         (mn10300_opcodes): Surround all memory addresses with "PAREN"
1564         operands.  Fix several typos.
1565
1566         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1567         changes.
1568
1569 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
1570
1571         * mn10300-opc.c (FMT_XX): Renumber starting at one.
1572         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
1573         at this time.
1574         (mn10300_opcodes): Break opcode format out into its own field.
1575         Update many operand fields to deal with signed vs unsigned
1576         issues.  Fix one or two typos in the "mov" instruction
1577         opcode, mask and/or operand fields.
1578
1579 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1580
1581         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1582         m68851 wasn't reset.
1583
1584 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
1585
1586         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1587         all opcodes.  Very rough cut at operands for all opcodes.
1588
1589         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1590         opcode table.
1591
1592 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
1593
1594         * mn10200-opc.c, mn10300-opc.c: New files.
1595         * mn10200-dis.c, mn10300-dis.c: New files.
1596         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1597         * disassemble.c: Break mn10x00 support into 10200 and 10300
1598         support.
1599         * configure.in: Likewise.
1600         * configure: Rebuilt.
1601
1602 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1603
1604         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1605
1606 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
1607
1608         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1609         MN10x00 processors.
1610         * disassemble (ARCH_mn10x00): Define.
1611         (disassembler): Handle bfd_arch_mn10x00.
1612         * configure.in: Recognize bfd_mn10x00_arch.
1613         * configure: Rebuilt.
1614
1615 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
1616
1617         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
1618         accordingly.  Don't declare functions using op_rtn.
1619
1620 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
1621
1622         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
1623         params to be more standard.
1624         * (disassemble):  Print absolute addresses and symbolic names for
1625         branch and jump targets.
1626         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
1627         bit operands.
1628         * (v850_opcodes):  Add breakpoint insn.
1629
1630 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1631
1632         * m68k-opc.c: Move the fmovemx data register cases before the
1633         other cases, so that they get recognized before the data register
1634         does gets treated as a degenerate register list.
1635
1636 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1637
1638         * mips-opc.c: Add a case for "div" and "divu" with two registers
1639         and a destination of $0.
1640
1641 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
1642
1643         * mips-dis.c (print_insn_arg): Add prototype.
1644         (_print_insn_mips): Ditto.
1645
1646 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1647
1648         * mips-dis.c (print_insn_arg): Print condition code registers as
1649         $fccN.
1650
1651 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
1652
1653         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1654
1655 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
1656
1657         * v850-dis.c (disassemble): Make static.  Provide prototype.
1658
1659 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
1660
1661         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1662         in range checks.
1663
1664 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
1665
1666         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1667         ']' characters into the output stream.
1668         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1669         Add "memop" field to all opcodes (for the disassembler).
1670         Reorder opcodes so that "nop" comes before "mov" and "jr"
1671         comes before "jarl".
1672
1673         * v850-dis.c (print_insn_v850): Fix typo in last change.
1674
1675         * v850-dis.c (print_insn_v850): Properly handle disassembling
1676         a two byte insn at the end of a memory region when the memory
1677         region's size is only two byte aligned.
1678
1679         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1680
1681         * v850-dis.c (v850_reg_names): Define.
1682         (v850_sreg_names, v850_cc_names): Likewise.
1683         (disassemble): Very rough cut at printing operands (unformatted).
1684
1685         * v850-opc.c (BOP_MASK): Fix.
1686         (v850_opcodes): Fix mask for jarl and jr.
1687
1688         * v850-dis.c: New file.  Skeleton for disassembler support.
1689         * Makefile.in Remove v850 references, they're not needed here.
1690         * configure.in: Add v850-dis.o when building v850 toolchains.
1691         * configure: Rebuilt.
1692         * disassemble.c (disassembler): Call v850 disassembler.
1693
1694         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1695         (insert_d8_6, extract_d8_6): New functions.
1696         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1697         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1698         Add D8_6.
1699         (IF4A, IF4B): Use "D7" instead of "D7S".
1700         (IF4C, IF4D): Use "D8_7" instead of "D8".
1701         (IF4E, IF4F): New.  Use "D8_6".
1702         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
1703         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
1704
1705         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1706         (v850_operands): Change D16 to D16_15, use special insert/extract
1707         routines.  New new D16 that uses the generic insert/extract code.
1708         (IF7A, IF7B): Use D16_15.
1709         (IF7C, IF7D): New.  Use D16.
1710         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1711
1712         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1713         message.  Issue an error if the branch offset is odd.
1714
1715         * v850-opc.c: Add notes about needing special insert/extract
1716         for all the load/store insns, except "ld.b" and "st.b".
1717
1718         * v850-opc.c (insert_d22, extract_d22): New functions.
1719         (v850_operands): Use insert_d22 and extract_d22 for
1720         D22 operands.
1721         (insert_d9): Fix range check.
1722
1723 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1724
1725         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1726         and set bits field to D9 and D22 operands.
1727
1728 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
1729
1730         * v850-opc.c (v850_operands): Define SR2 operand.
1731         (v850_opcodes): "ldsr" uses R1,SR2.
1732
1733         * v850-opc.c (v850_opcodes): Fix opcode specs for
1734         sld.w, sst.b, sst.h, sst.w, and nop.
1735
1736 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
1737
1738         * v850-opc.c (v850_opcodes): Add null opcode to mark the
1739         end of the opcode table.
1740
1741 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1742
1743         * d10v-opc.c (pre_defined_registers): Added register pairs,
1744         "r0-r1", "r2-r3", etc.
1745
1746 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
1747
1748         * v850-opc.c (v850_operands): Make I16 be a signed operand.
1749         Create I16U for an unsigned 16bit mmediate operand.
1750         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1751
1752         * v850-opc.c (v850_operands): Define EP operand.
1753         (IF4A, IF4B, IF4C, IF4D): Use EP.
1754
1755         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1756         with immediate operand, "movhi".  Tweak "ldsr".
1757
1758         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1759         correct.  Get sld.[bhw] and sst.[bhw] closer.
1760
1761         * v850-opc.c (v850_operands): "not" is a two byte insn
1762
1763         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1764
1765         * v850-opc.c (v850_operands): D16 inserts at offset 16!
1766
1767         * v850-opc.c (two): Get order of words correct.
1768
1769         * v850-opc.c (v850_operands): I16 inserts at offset 16!
1770
1771         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1772         register source and destination operands.
1773         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1774
1775         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
1776         same thinko in "trap" opcode.
1777
1778         * v850-opc.c (v850_opcodes): Add initializer for size field
1779         on all opcodes.
1780
1781         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
1782         Add D8 for 8-bit unsigned field in short load/store insns.
1783         (IF4A, IF4D): These both need two registers.
1784         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
1785         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1786         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
1787         for "ldsr" and "stsr".
1788         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1789         is unsigned.
1790
1791         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1792         short store word (sst.w).
1793
1794 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1795
1796         * v850-opc.c (v850_operands): Added insert and extract fields,
1797         pointers to functions that handle unusual operand encodings.
1798
1799 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
1800
1801         * v850-opc.c (v850_opcodes): Enable "trap".
1802
1803         * v850-opc.c (v850_opcodes): Fix order of displacement
1804         and register for "set1", "clr1", "not1", and "tst1".
1805
1806 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
1807
1808         * v850-opc.c (v850_operands): Add "B3" support.
1809         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1810         and "tst1".
1811
1812         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1813
1814         * v850-opc.c: Close unterminated comment.
1815
1816 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1817
1818         * v850-opc.c (v850_operands): Add flags field.
1819         (v850_opcodes): add move opcodes.
1820
1821 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1822
1823         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1824         * configure: (bfd_v850v_arch) Add new case.
1825         * configure.in: (bfd_v850_arch) Add new case.
1826         * v850-opc.c: New file.
1827
1828 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
1829
1830         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1831
1832 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1833
1834         * d10v-opc.c: Add additional information to the opcode
1835         table to help determinine which instructions can be done
1836         in parallel.
1837
1838 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
1839
1840         * mpw-make.sed: Update editing of include pathnames to be
1841         more general.
1842
1843 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
1844
1845         * arm-opc.h: Added "bx" instruction definition.
1846
1847 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
1848
1849         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1850
1851 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1852
1853         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1854
1855 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1856
1857         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1858
1859 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
1860
1861         * makefile.vms: Update for alpha-opc changes.
1862
1863 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
1864
1865         * i386-dis.c (print_insn_i386): Actually return the correct value.
1866         (ONE, OP_ONE): #ifdef out; not used.
1867
1868 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1869
1870         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1871         Changed subi operand type to treat 0 as 16.
1872
1873 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
1874
1875         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
1876         <rose@netcom.com>.
1877
1878 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
1879
1880         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1881         memory transfer instructions. Add new format string entries %h and %s.
1882         * arm-dis.c: (print_insn_arm): Provide decoding of the new
1883         formats %h and %s.
1884
1885 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1886
1887         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1888         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1889
1890 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
1891
1892         * alpha-dis.c (print_insn_alpha_osf): Remove.
1893         (print_insn_alpha_vms): Remove.
1894         (print_insn_alpha): Make globally visible.  Chose the register
1895         names based on info->flavour.
1896         * disassemble.c: Always return print_insn_alpha for the alpha.
1897
1898 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1899
1900         * d10v-dis.c (dis_long): Handle unknown opcodes.
1901
1902 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1903
1904         * d10v-opc.c: Changes to support signed and unsigned numbers.
1905         All instructions with the same name that have long and short forms
1906         now end in ".l" or ".s".  Divs added.
1907         * d10v-dis.c: Changes to support signed and unsigned numbers.
1908
1909 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1910
1911         * d10v-dis.c: Change all functions to use info->print_address_func.
1912
1913 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1914
1915         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1916         move ccr/sr insns more strict so that the disassembler only
1917         selects them when the addressing mode is data register.
1918
1919 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1920         * d10v-opc.c (pre_defined_registers):  Declare.
1921         * d10v-dis.c (print_operand): Now uses pre_defined_registers
1922         to pick a better name for the registers.
1923
1924 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
1925
1926         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
1927         operands for fexpand and fpmerge.  From Christian Kuehnke
1928         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1929
1930 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
1931
1932         * alpha-dis.c (print_insn_alpha): No longer the user-visible
1933         print routine.  Take new regnames and cpumask arguments.
1934         Kill the environment variable nonsense.
1935         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
1936         (print_insn_alpha_vms): New function.  Do VMS style regnames.
1937         * disassemble.c (disassembler): Test bfd flavour to pick
1938         between OSF and VMS routines.  Default to OSF.
1939
1940 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
1941
1942         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1943         * configure: Rebuild.
1944         * Makefile.in (install): Use @INSTALL_SHLIB@.
1945
1946 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1947
1948         * configure: (bfd_d10v_arch) Add new case.
1949         * configure.in: (bfd_d10v_arch) Add new case.
1950         * d10v-dis.c: New file.
1951         * d10v-opc.c: New file.
1952         * disassemble.c (disassembler) Add entry for d10v.
1953
1954 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1955
1956         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1957         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1958
1959 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
1960
1961         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
1962         distinguish between variants of the instruction set.
1963         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
1964         distinguish between variants of the instruction set.
1965
1966 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
1967
1968         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
1969         the 8086 instruction set.
1970         * i386-dis.c:  General cleanups.  Make most things static.  Add
1971         prototypes.  Get rid of static variables aflags and dflags.  Pass
1972         them as args (to almost everything).
1973
1974 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
1975
1976         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1977
1978         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1979
1980         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1981         if the next arg is marked with SRC_IN_DST.  Gross.
1982
1983         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1984         we're looking for and find EXR.
1985
1986         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1987         if we're looking for KBIT and we don't find it.
1988
1989         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1990         for L_3 and L_2.
1991
1992         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1993         3bit immediate operands.
1994
1995 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1996
1997         * Released binutils 2.7.
1998
1999         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
2000         <kkaempf@progis.ac-net.de>.
2001
2002 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
2003
2004         * alpha-opc.c: Correct second case of "mov" to use OPRL.
2005
2006 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
2007
2008         * sparc-dis.c (print_insn_sparclite):  New routine to print
2009         sparclite instructions.
2010
2011 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2012
2013         * m68k-opc.c (m68k_opcodes): Add coldfire support.
2014
2015 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
2016
2017         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2018         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2019         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2020
2021 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
2022
2023         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2024         Use autoconf-set values.
2025         (docdir, oldincludedir): Removed.
2026         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2027
2028 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
2029
2030         * alpha-opc.c: New file.
2031         * alpha-opc.h: Remove.
2032         * alpha-dis.c: Complete rewrite to use new opcode table.
2033         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2034         * configure: Rebuild with autoconf 2.10.
2035         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2036         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2037         alpha-opc.h.
2038         (alpha-opc.o): New target.
2039
2040 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
2041
2042         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2043         Set imm_added_to_rs1 even if the source and destination register
2044         are not the same.
2045
2046         * sparc-opc.c: Add some two operand forms of the wr instruction.
2047
2048 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
2049
2050         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2051         to just "mode".
2052
2053         * disassemble.c (disassembler): Handle H8/S.
2054         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2055
2056 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
2057
2058         * sparc-opc.c: Add beq/teq as aliases for be/te.
2059
2060         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
2061         <sergei@msil.sps.mot.com>.
2062
2063 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
2064
2065         * makefile.vms: New file.
2066
2067         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2068
2069 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
2070
2071         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2072         regardless of plen.
2073
2074 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
2075
2076         * i386-dis.c (OP_OFF): Call append_prefix.
2077
2078 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2079
2080         * ppc-opc.c (instruction encoding macros): Add explicit casts to
2081         unsigned long to silence a warning from the Solaris PowerPC
2082         compiler.
2083
2084 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
2085
2086         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2087
2088 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
2089
2090         * sparc-dis.c (X_IMM,X_SIMM): New macros.
2091         (X_IMM13): Delete.
2092         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
2093         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2094         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
2095         cpush, cpusha, cpull sparclet insns.
2096
2097 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
2098
2099         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2100
2101 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
2102
2103         * sparc-opc.c: Set F_FBR on floating point branch instructions.
2104         Set F_FLOAT on other floating point instructions.
2105
2106 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2107
2108         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2109         registers.
2110         (powerpc_opcodes): Add 860/821 specific SPRs.
2111
2112 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
2113
2114         * configure.in: Permit --enable-shared to specify a list of
2115         directories.  Set and substitute BFD_PICLIST.
2116         * configure: Rebuild.
2117         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
2118         uses.  Set to @BFD_PICLIST@.
2119
2120 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
2121
2122         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2123         not "abs", which may be needed for the absolute in something
2124         like btst #0,@10:8.  Print L_3 immediates separately from other
2125         immediates.  Change ABSMOV reference to ABS8MEM.
2126
2127 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
2128
2129         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2130         (current_arch_mask): New static global.
2131         (compute_arch_mask): New static function.
2132         (print_insn_sparc): Delete sparc_v9_p.  New static local
2133         current_mach.  Resort opcode table if current_mach changes.
2134         Generalize "insn not supported" test.
2135         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2136         Delete test for v9/!v9.
2137         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2138         (v6notlet): Define.
2139         (brfc): Split into CBR and FBR for coprocessor/fp branches.
2140         (brfcx): Renamed to FBRX.
2141         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
2142         coprocessor mnemonics are not supported on the sparclet).
2143         (condf): Renamed to CONDF.
2144         (SLCBCC2): Delete F_ALIAS flag.
2145
2146 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
2147
2148         * sparc-opc.c (sparc_opcodes): rd must be 0 for
2149         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
2150
2151 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
2152
2153         * Makefile.in (config.status): Depend upon BFD VERSION file, so
2154         that the shared library version number is set correctly.
2155
2156 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
2157
2158         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
2159         Miles Bader <miles@gnu.ai.mit.edu>.
2160         * configure: Rebuild.
2161
2162 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
2163
2164         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2165         malloc.
2166
2167 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
2168
2169         * configure: Rebuild with autoconf 2.8.
2170
2171 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2172
2173         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2174         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2175
2176 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
2177
2178         * configure.in: Don't set SHLIB or SHLINK to an empty string,
2179         since they appear as targets in Makefile.in.
2180         * configure: Rebuild.
2181
2182 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
2183
2184         * mpw-make.sed: Edit out shared library support bits.
2185
2186 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
2187
2188         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2189         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2190         (sparc_opcodes): Add sparclet insns.
2191         (sparclet_cpreg_table): New static local.
2192         (sparc_{encode,decode}_sparclet_cpreg): New functions.
2193         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2194
2195 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
2196
2197         * i386-dis.c (index16): New static variable.
2198         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2199         other way around.
2200         (OP_indirE): Return result of OP_E.
2201         (OP_E): Check for 16 bit addressing mode, and disassemble
2202         correctly.  Optimised 32 bit case a little.  Don't print
2203         "(base,index,scale)" when sib specifies only an offset.
2204
2205 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
2206
2207         * configure.in: Set and substitute SHLIB_DEP.
2208         * configure: Rebuild.
2209         * Makefile.in (SHLIB_DEP): New variable.
2210         (LIBIBERTY_LISTS, BFD_LIST): New variables.
2211         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
2212         COMMON_SHLIB, add them to piclist with appropriate modifications.
2213         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
2214         here: just use piclist.
2215
2216 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
2217
2218         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2219         (print_insn_sparc): Rewrite v9/not-v9 tests.
2220         (compare_opcodes): Likewise.
2221         * sparc-opc.c (MASK_<ARCH>): Define.
2222         (v6,v7,v8,sparclite,v9,v9a): Redefine.
2223         (sparclet,v6notv9): Define.
2224         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
2225         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2226
2227 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
2228
2229         * configure.in: Call AC_PROG_CC before configure.host.
2230         * configure: Rebuild.
2231
2232         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2233
2234 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
2235
2236         * i386-dis.c (onebyte_has_modrm): New static array.
2237         (twobyte_has_modrm): New static array.
2238         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2239
2240 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2241
2242         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2243         $(SHLINK).
2244
2245 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2246
2247         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2248         doesn't conflict.
2249
2250 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2251
2252         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2253         m68010up, not just m68020up | cpu32.
2254
2255         * Makefile.in (SONAME): New variable.
2256         ($(SHLINK)): Make a link to the transformed name, as well.
2257         (stamp-tshlink): New target.
2258         (install): Skip stamp-tshlink during install.
2259
2260 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2261
2262         * configure.in: Call AC_ARG_PROGRAM.
2263         * configure: Rebuild.
2264         * Makefile.in (program_transform_name): New variable.
2265         (install): Transform library name before installing it.
2266
2267 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
2268
2269         * i960-dis.c (mem): Add HX dcinva instruction.
2270
2271         Support for building as a shared library, based on patches from
2272         Alan Modra <alan@spri.levels.unisa.edu.au>:
2273         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2274         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2275         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2276         * configure: Rebuild.
2277         * Makefile.in (ALLLIBS): New variable.
2278         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2279         (COMMON_SHLIB, SHLINK): New variables.
2280         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2281         (STAGESTUFF): Remove variable.
2282         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2283         (stamp-piclist, piclist): New targets.
2284         ($(SHLIB), $(SHLINK)): New targets.
2285         ($(OFILES)): Depend upon stamp-picdir.
2286         (disassemble.o): Build twice if PICFLAG is set.
2287         (MOSTLYCLEAN): Add pic/*.o.
2288         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2289         (distclean): Remove pic and stamp-picdir.
2290         (install): Install shared libraries.
2291         (stamp-picdir): New target.
2292
2293 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
2294
2295         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2296         Print unknown instruction as "unknown", rather than in hex.
2297
2298 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
2299
2300         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2301
2302 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
2303
2304         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2305
2306 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
2307
2308         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2309         when necessary.  From Ulrich Drepper
2310         <drepper@myware.rz.uni-karlsruhe.de>.
2311
2312 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2313
2314         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2315         sparc_num_opcodes.  Update architecture enum values.
2316         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2317         (sparc_opcode_lookup_arch): New function.
2318         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2319         (sparc_opcodes): Add v9a shutdown insn.
2320
2321 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
2322
2323         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2324         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
2325         architecture.
2326         (print_insn_sparc64): Deleted.
2327         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2328         print_insn_sparc.
2329
2330         * sparc-opc.c (architecture_pname): Add v9a.
2331
2332 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
2333
2334         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2335         incorrectly defined as 0x16 when it should be 0x15.
2336         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2337         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
2338         excb (exception barrier) which is defined in the Alpha
2339         Architecture Handbook version 2.
2340         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2341         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
2342         disassembled as or, for example.
2343
2344 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
2345
2346         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2347         (_print_insn_mips): Change i from int to unsigned int.
2348
2349 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
2350
2351         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2352         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
2353
2354 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
2355
2356         * i386-dis.c: Added Pentium Pro instructions.
2357
2358 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2359
2360         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2361         being for Power2.
2362
2363 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2364
2365         * sh-opc.h (sh_nibble_type): Added REG_B.
2366         (sh_arg_type): Added A_REG_B.
2367         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2368         and stc.l opcodes.
2369         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2370
2371 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2372
2373         * disassemble.c (disassembler): Use new bfd_big_endian macro.
2374
2375 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2376
2377         * Makefile.in (distclean): Remove stamp-h.  From Ronald
2378         F. Guilmette <rfg@monkeys.com>.
2379
2380 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
2381
2382         From David Mosberger-Tang  <davidm@azstarnet.com>:
2383         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2384         instruction.
2385
2386 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2387
2388         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2389         (sh_table): Added many SH3 opcodes.
2390         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2391
2392 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2393
2394         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2395         (subco,subco.): Mark this PPC, not PPCCOM.
2396
2397 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
2398
2399         * configure: Rebuild with autoconf 2.7.
2400
2401 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2402
2403         * configure: Rebuild with autoconf 2.6.
2404
2405 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
2406
2407         * configure.in: Sort list of architectures.  Accept but do nothing
2408         for alliant, convex, pyramid, romp, and tahoe.
2409
2410 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
2411
2412         * a29k-dis.c (print_special): Change num to unsigned int.
2413
2414 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
2415
2416         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2417         shifting it.
2418
2419 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2420
2421         * configure.in: Call AC_CHECK_PROG to find and cache AR.
2422         * configure: Rebuilt.
2423
2424 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
2425
2426         * configure.in: Add case for bfd_i860_arch.
2427         * configure: Rebuild.
2428
2429 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2430
2431         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2432         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2433         (NEXTDOUBLE): Likewise.
2434         (print_insn_m68k): Don't match fmoveml if there is more than one
2435         register in the list.
2436         (print_insn_arg): Handle a place of '8' for a type of 'L'.
2437
2438 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2439
2440         * m68k-opc.c: Use #W rather than #w.
2441         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2442
2443 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2444
2445         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2446         and likewise for all the dbxx opcodes.
2447
2448 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
2449
2450         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2451
2452 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
2453
2454         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2455         the VR4100 specific instructions to the mips_opcodes structure.
2456
2457 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
2458
2459         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2460         ugly Metrowerks bug in CW6, is fixed in CW7.
2461
2462 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2463
2464         * ppc-opc.c (whole file): Add flags for common/any support.
2465
2466 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
2467
2468         * Makefile.in (BISON): Remove macro.
2469         (FLAGS_TO_PASS): Remove BISON.
2470
2471 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
2472
2473         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2474
2475         * m68k-dis.c (print_insn_m68k): Recognize all two-word
2476         instructions that take no args by looking at the match mask.
2477         (print_insn_arg): Always print "%" before register names.
2478         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2479         [case '_']: Don't print "@#" before address.
2480         [case 'J']: Use "%s" as format string, not register name.
2481         [case 'B']: Treat place == 'C' like 'l' and 'L'.
2482
2483 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
2484
2485         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2486         name correctly.
2487
2488 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
2489
2490         From David Mosberger-Tang  <davidm@azstarnet.com>
2491
2492         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2493         (alpha_insn_set): added definitions for VAX floating point
2494         instructions (Unix compilers don't generate these, but handcoded
2495         assembly might still use them).
2496
2497         * alpha-dis.c (print_insn_alpha): added support for disassembling
2498         the miscellaneous instructions in the Alpha instruction set.
2499
2500 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
2501
2502         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2503         no longer create sysdep.h, sed ppc-opc.c to work around a
2504         serious Metrowerks C bug.
2505         * mpw-make.in: Remove.
2506         * mpw-make.sed: New file, used by mpw-configure to edit
2507         Makefile.in into an MPW makefile.
2508
2509 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
2510
2511         * Makefile.in (maintainer-clean): New synonym for realclean.
2512
2513 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2514
2515         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2516         which use '0', '1', and '2' instead.  Specify the proper size for
2517         a pmove immediate operand.  Correct the pmovefd patterns to be
2518         moves to a register, not from a register.
2519         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2520
2521 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
2522
2523         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2524         %psr, %wim, %tbr as F_NOTV9.
2525
2526 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
2527
2528         * Makefile.in (Makefile): Just rebuild Makefile when running
2529         config.status.
2530         (config.h, stamp-h): New targets.
2531         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2532         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
2533         rebuilding config.h.
2534         * configure: Rebuild.
2535
2536         * mips-opc.c: Change unaligned loads and stores with "t,A"
2537         operands to use "t,A(b)".
2538
2539 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2540
2541         * sh-dis.c (print_insn_shx): Add F_FR0 support.
2542
2543 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2544
2545         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2546         until 3 instead of until 2.
2547
2548 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2549
2550         * Makefile.in (ALL_CFLAGS): Define.
2551         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2552         (MOSTLYCLEAN): Add config.log.
2553         (distclean): Don't remove config.log.
2554         * configure.in: Substitute HDEFINES.
2555         * configure: Rebuild.
2556
2557 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2558
2559         * sh-opc.h (sh_arg_type): Add F_FR0.
2560         (sh_table, case fmac): Add F_FR0 as first argument.
2561
2562 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2563
2564         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2565
2566 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
2567
2568         * sparc-dis.c: Remove all references to NO_V9.
2569
2570 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
2571
2572         * aclocal.m4: Just include ../bfd/aclocal.m4.
2573         * configure: Rebuild.
2574
2575 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
2576
2577         * sparc-dis.c (X_DISP19): Define.
2578         (print_insn, case 'G'): Use it.
2579         (print_insn, case 'L'): Sign extend displacement.
2580
2581 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
2582
2583         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2584         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
2585         host_makefile_frag or frags.
2586         * aclocal.m4: New file.
2587         * configure: Rebuild.
2588         * Makefile.in (INSTALL): Set to @INSTALL@.
2589         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2590         (INSTALL_DATA): Set to @INSTALL_DATA@.
2591         (AR): Set to @AR@.
2592         (AR_FLAGS): Set to rc rather than qc.
2593         (CC): Define as @CC@.
2594         (CFLAGS): Set to @CFLAGS@.
2595         (@host_makefile_frag@): Remove.
2596         (config.status): Remove dependency upon @frags@.
2597
2598         * configure.in: ../bfd/config.bfd now just sets shell variables.
2599         Use them rather than looking through target Makefile fragments.
2600         * configure: Rebuild.
2601
2602 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2603
2604         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2605
2606 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
2607
2608         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2609         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2610         sparc64 insns.
2611
2612         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2613         (lookup_{name,value}): New functions.
2614         (prefetch_table): New static local.
2615         (sparc_{encode,decode}_prefetch): New functions.
2616         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2617
2618 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2619
2620         * sh-opc.h: Add blank lines to improve readabililty of sh3e
2621         instructions.
2622
2623 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2624
2625         * sh-dis.c: Correct comment on first line of file.
2626
2627 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
2628
2629         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2630
2631         * sparc-opc.c (asi, membar): New static locals.
2632         (sparc_{encode,decode}_{asi,membar}): New functions.
2633         (sparc_opcodes, membar insn): Fix.
2634         * sparc-dis.c (print_insn): Call sparc_decode_asi.
2635         Support decoding of membar masks.
2636         (X_MEMBAR): Define.
2637
2638 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
2639
2640         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2641
2642 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2643
2644         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2645         and likewise for the other branches.  Add bhs as an alias for bcc,
2646         and likewise for the size variants.  Add dbhs as an alias for
2647         dbcc.
2648
2649 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
2650
2651         * sh-opc.h (FP sts instructions): Update to match reality.
2652
2653 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
2654
2655         * m68k-dis.c: (fpcr_names): Add % before all register names.
2656         (reg_names): Likewise.
2657         (print_insn_arg): Don't explicitly print % before register names.
2658         Add % before register names in static array names.  In case 'r',
2659         print data registers as `@(Dn)', not `Dn@'.  When printing a
2660         memory address, don't print @# before it.
2661         (print_indexed): Change base_disp and outer_disp from int to
2662         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
2663         syntax.  Sign extend 8 byte displacement correctly.
2664         (print_base): Print using MIT syntax.  Print zpc when appropriate.
2665         Change parameter disp from int to bfd_vma.
2666
2667         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2668         for jsr.
2669
2670 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2671
2672         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2673         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2674         * sh-opc.h (sh_arg_type): Add new operand types.
2675         (sh_table): Add new opcodes from SH3E Floating Point ISA.
2676
2677 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2678
2679         * Makefile.in (distclean): Remove generated file config.h.
2680
2681 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2682
2683         * Makefile.in (distclean): Remove generated file config.h.
2684
2685 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
2686
2687         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2688         Clean up tables.
2689         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2690         (opcode): Remove.
2691         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
2692         rather than numopcodes.  Use m68k_opcodes rather than removed
2693         opcode function.  Don't check F_ALIAS.
2694         (print_insn_arg): Change first parameter to be const char *.
2695         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2696         (m68k-opc.o): New target.
2697         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2698         * configure: Rebuild.
2699
2700 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
2701
2702         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2703         (opcode_bits, opcode_hash_table): New variables.
2704         (opcodes_initialized): Renamed from opcodes_sorted.
2705         (build_hash_table): New function.
2706         (is_delayed_branch): Use hash table.
2707         (print_insn): Renamed from print_insn_sparc, made static.
2708         Build and use hash table.  If !sparc64, ignore sparc64 insns,
2709         and vice-versa if sparc64.
2710         (print_insn_sparc, print_insn_sparc64): New functions.
2711         (compare_opcodes): Move sparc64 opcodes to end.
2712         Print commutative insns with constant second.
2713         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2714
2715 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2716
2717         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
2718         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
2719         avoids printing a delay slot in a delay slot.
2720         * sh-opc.h (sh_table): Fully bracket last entry.
2721
2722 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
2723
2724         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2725
2726 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
2727
2728         * configure.in: Get host_makefile_frag from ${srcdir}.
2729
2730         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
2731         config.h from config.in.  Don't set up sysdep.h link.
2732         * sysdep.h: New file.
2733         * configure, config.in: New files, generated from configure.in.
2734         * Makefile.in: Updated to be processed autoconf-style.
2735         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
2736         (Makefile): Depend on config.status.
2737         (config.status): New rule.
2738         * configure.bat: Update Makefile substitutions.
2739
2740 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
2741
2742         * mips-opc.c (L1): Define.
2743         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2744         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2745         and wb.
2746
2747 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2748
2749         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2750         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2751         have multiple add units but only a single logical unit.
2752
2753         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2754         shifted by 18, without any insertion or extraction function.
2755         (insert_cr, extract_cr): Remove.
2756
2757 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2758
2759         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2760         register names.
2761
2762 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
2763
2764         * mpw-config.in: Add sh and i386 configs, remove sparc config.
2765         * sh-opc.h: Add copyright.
2766
2767 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
2768
2769         * Makefile.in (crunch-m68k): Delete extra target accidentally
2770         checked in a while ago.
2771
2772 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2773
2774         * sh-opc.h (sh_table): Add SH3 support.
2775
2776 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
2777
2778         * sh-opc.h: Added bsrf and braf.
2779
2780 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2781
2782         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
2783         bogus [ls]fm{ea,fd} patterns.
2784
2785         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2786         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2787         initialize it from memory.  Make function static.
2788         (print_insn_{big,little}_arm): New functions.
2789         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2790         the correct endianness.
2791
2792 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
2793
2794         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2795         enum list.
2796
2797 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2798
2799         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2800         17th, so that it builds again using GCC as the compiler.
2801
2802 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2803
2804         * mips-dis.c (print_insn_little_mips): Cast return value from
2805         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2806         expects an unsigned long, and that might be fewer words of
2807         argument storage (e.g., if bfd_vma is long long on a 32-bit
2808         machine).
2809         (print_insn_big_mips): Likewise with bfd_getb32 value.
2810         (_print_insn_mips): Now static.
2811
2812 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
2813
2814         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2815         gcc memory hog problem with initializer is fixed.
2816
2817 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
2818
2819         Merge in support for Mac MPW as a host.
2820         (Old change descriptions retained for informational value.)
2821
2822         * mpw-config.in (archname): Compute from the config.
2823         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2824
2825         * mpw-config.in (target_arch): Compute from canonical target.
2826         (m68k, mips, powerpc, sparc): Add architectures.
2827         * mpw-make.in (disassemble.c.o): Add.
2828         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2829
2830         * mpw-config.in (BFD_MACHINES): Set to a default value.
2831         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2832
2833         * mpw-make.in (CSEARCH): Add extra-include to search path.
2834
2835         * mpw-config.in (varargs.h): Don't create.
2836         (sysdep.h): Create using forward-include.
2837         * mpw-make.in (CSEARCH): Add include/mpw to search path.
2838
2839         * mpw-config.in: New file, MPW version of configure.in.
2840         * mpw-make.in: New file, MPW version of Makefile.in.
2841
2842 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2843
2844         * alpha-dis.c (print_insn_alpha): Put empty statement after
2845         default label.
2846
2847 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2848
2849         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2850         (low_sign_extend): Likewise.
2851         (get_field): Delete unused function.
2852         (set_field, deposit_14, deposit_21): Likewise.
2853
2854 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2855
2856         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
2857           (guy@netapp.com).
2858
2859 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
2860
2861         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
2862
2863         * alpha-opc.h (OSF_ASMCODE): define
2864         print pal-code names as defined in App C of the
2865         Alpha Architecture Reference Manual
2866
2867         * alpha-dis.c: cleaned up output
2868         print stylized code forms as defined in App A.4.3 of the
2869         Alpha Architecture Reference Manual
2870
2871 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
2872
2873         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
2874         `rfe'.
2875         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2876         'N', and 'M'.
2877
2878 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2879
2880         * m68k-dis.c (opcode): New function.  Returns address of opcode
2881         table entry given index, even if the opcode table was split to
2882         work around gcc bugs.
2883         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2884         directly.
2885         (BREAK_UP_BIG_DECL): Make secondary array static and const.
2886         (reg_names): Now const.
2887         (print_insn_arg): Arrays cacheFieldName and names now const.
2888         (print_indexed): Array scales now const.
2889
2890 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
2891
2892         * ppc-opc.c: Sort recently added instructions by minor opcode
2893         number within major opcode number.
2894
2895 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
2896
2897         * hppa-dis.c: Include libhppa.h.
2898
2899 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2900
2901         * mips-opc.c: Change dli to use M_DLI, and add dla.
2902
2903 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2904
2905         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
2906
2907 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
2908
2909         * mips-opc.c: Add r4650 mul instruction.
2910
2911 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
2912
2913         * mips-opc.c: Add uld and usd macros for unaligned double load and
2914         store.
2915
2916 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2917
2918         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2919         mfdcr, mtdcr, icbt, iccci.
2920
2921 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
2922
2923         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2924         signed char fields to shorts, more portable.
2925
2926 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
2927
2928         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2929         char fields as signed chars, since they may have negative values.
2930
2931 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2932
2933         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2934           (mycroft@netbsd.org).
2935
2936 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
2937
2938         From "Logg, Ed" <elogg@ea.com>:
2939         * ppc-opc.c (extract_bdm): Correct parenthezisation.
2940         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2941         value.
2942
2943 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
2944
2945         * ppc-opc.c: Changes based on patch from David Edelsohn
2946         <edelsohn@mhpcc.edu>.
2947         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2948         SPR.
2949         (FXM_MASK): Define.
2950         (insert_tbr): New static function.
2951         (extract_tbr): New static function.
2952         (XFXFXM_MASK, XFXM): Define.
2953         (XSPRBAT_MASK, XSPRG_MASK): Define.
2954         (powerpc_opcodes): Add instructions to access special registers by
2955         name.  Add mtcr and mftbu.
2956
2957 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2958
2959         * mips-opc.c (P3): Define.
2960         (mips_opcodes): Add mad and madu.
2961
2962 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
2963
2964         * configure.in: Add W65 support.
2965         * disassemble.c: Likewise.
2966         * w65-opc.h, w65-dis.c: New files.
2967
2968 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2969
2970         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2971         immediates.
2972
2973 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2974
2975         * mips-opc.c: Add dli as a synonym for li.
2976
2977 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2978
2979         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2980         print something for reserved opcode values, even if it won't
2981         assemble again.
2982
2983         * mips-dis.c (_print_insn_mips): When initializing, shift right
2984         and mask, to avoid sign extension problems on the Alpha.
2985
2986         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2987         control registers.
2988
2989 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2990
2991         * sh-opc.h (mov.l gbr): Get direction right.
2992         * sh-dis.c (print_insn_shx): New function.
2993         (print_insn_shl, print_insn_sh): Call print_insn_shx to
2994         print opcodes with right byte order.
2995
2996 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2997
2998         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2999         to avoid conflicts with getopt.
3000
3001 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3002
3003         * hppa-dis.c (print_insn_hppa): Read the instruction using
3004         bfd_getb32, so that it works on a little endian or 64 bit host.
3005         Remove unused local variable op.
3006
3007 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3008
3009         * mips-opc.c: Use or instead of addu for pseudo-op move, since
3010         addu does not work correctly if -mips3.
3011
3012 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3013
3014         * a29k-dis.c (print_special): Add special register names defined
3015         on 29030, 29040 and 29050.
3016         (print_insn): Handle new operand type 'I'.
3017
3018 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3019
3020         * Makefile.in (INSTALL): Use top level install.sh script.
3021
3022 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3023
3024         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3025         that it works on a little endian host.
3026
3027 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3028
3029         * configure.in: Use ${config_shell} when running config.bfd.
3030
3031 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3032
3033         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3034
3035 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3036
3037         * a29k-dis.c (print_insn): Print the opcode.
3038
3039 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3040
3041         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3042
3043 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
3044
3045         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3046
3047 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3048
3049         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3050         which store a value into memory.
3051
3052 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3053
3054         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3055         * arm-dis.c, arm-opc.h: New files.
3056
3057 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
3058
3059         * Makefile.in (ns32k-dis.o): Add dependency.
3060         * ns32k-dis.c (print_insn_arg): Declare initialized local as
3061         string, not as array of chars.
3062
3063 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3064
3065         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3066
3067         * sparc-opc.c: Added sparclite extended FP operations, and
3068         versions of v9 impdep* instructions permitting specification of
3069         the OPF field.
3070
3071 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3072
3073         * i960-dis.c (reg_names): Now const.
3074         (struct sparse_tabent): New type, copied from array type in mem
3075         function.
3076         (ctrl): Local static array ctrl_tab now const.
3077         (cobr): Local static array cobr_tab now const.
3078         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
3079         static variable mem_tab no longer explicitly initialized.  Changed
3080         mem_init to const array of struct sparse_tabent.
3081         (reg): Local static variable reg_tab no longer explicitly
3082         initialized.  Changed reg_init to const array of struct
3083         sparse_tabent.
3084         (ea): Local static array scale_tab now const.
3085
3086         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3087         (REG_MAX): Updated.
3088
3089 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
3090
3091         * configure.bat: the disassember needs to be enabled for
3092         "objdump -d" to work in djgpp.
3093
3094 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3095
3096         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3097         (invalid_float): Enabled general version, doesn't require running
3098         on ns32k host.  Changed to take char* argument, and test for
3099         explicitly specified sizes, instead of using sizeof() on host CPU
3100         types.
3101         (INVALID_FLOAT): Cast first argument.
3102         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3103         list_P032, list_M032): Now const.
3104         (optlist, list_search): Made appropriate arguments now point to
3105         const.
3106         (print_insn_arg): Changed static array of one-character-string
3107         pointers into a static const array of characters; fixed sprintf
3108         statement accordingly.
3109
3110 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
3111
3112         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
3113         from distribution. A ns32k-dis.c from a previous distribution has
3114         been brought up to date and supports the new interface.
3115
3116         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3117
3118         * configure.in: add bfd_ns32k_arch target support.
3119
3120         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3121         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3122
3123 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
3124
3125         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3126         disassembly right.
3127
3128 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
3129
3130         * h8300-dis.c, mips-dis.c: Don't use true and false.
3131
3132 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
3133
3134         * configure.in: Change --with-targets to --enable-targets.
3135
3136 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3137
3138         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3139         opcodes to the first instruction with that opcode, to speed
3140         disassembly of large files.  From ralphc@pyramid.com (Ralph
3141         Campbell).
3142
3143 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3144
3145         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3146
3147 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
3148
3149         * configure.bat: update to latest makefile.in
3150
3151 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
3152
3153         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3154         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3155         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3156         slot insn is in a delay slot.
3157         * z8k-opc.h: (resflg): Fix patterns.
3158         * h8500-opc.h Fix CR insn patterns.
3159
3160 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3161
3162         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3163         "cmpl" before POWER versions, so that gas -many uses them.
3164
3165 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3166
3167         * disassemble.c: New file.
3168         * Makefile.in (OFILES): Add disassemble.o.
3169         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3170         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
3171         binutils/configure.in.
3172
3173         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3174         opcode being examined.
3175
3176 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3177
3178         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3179         (insert_ral, insert_ram, insert_ras): New functions.
3180         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3181         RAS for store with update.
3182
3183 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3184
3185         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
3186         (edelsohn@npac.syr.edu).
3187
3188 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3189
3190         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3191         immediate argument.
3192
3193 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
3194
3195         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3196
3197 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3198
3199         * ppc-opc.c (powerpc_operands): The signedp field has been
3200         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
3201         instead.  Add new operand SISIGNOPT.
3202         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3203         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3204         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3205         than signedp field.
3206
3207 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3208
3209         * i386-dis.c (struct private):  Renamed to dis_private. `private'
3210         is a reserved word for dynix cc.
3211
3212 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3213
3214         * configure.in: Change error message to refer to bfd/config.bfd
3215         rather than bfd/configure.in.
3216
3217 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
3218
3219         * ppc-opc.c: Define POWER2 as short alias flag.
3220         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3221         fsqrt.
3222
3223 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3224
3225         * i960-dis.c (print_insn_i960): Don't read a second word for
3226         opcodes 0, 1, 2 and 3.
3227
3228 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3229
3230         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3231
3232 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3233
3234         * m68881-ext.c: Removed; no longer used.
3235         * Makefile.in: Changed accordingly.
3236
3237         * m68k-dis.c (ext_format_68881): Don't declare.
3238         (print_insn_m68k): If an instruction uses place 'i', it uses at
3239         least four fixed bytes.
3240         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
3241         extended float, convert to double using floatformat_to_double, not
3242         ieee_extended_to_double, and fetch the data before converting it.
3243
3244 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3245
3246         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
3247         davidj@ICSI.Berkeley.EDU (David Johnson).
3248
3249 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3250
3251         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3252         PowerPC uses bdnz[l][a].
3253
3254 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3255
3256         * dis-buf.c, i386-dis.c:  Include sysdep.h.
3257
3258 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3259
3260         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3261
3262         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3263         by Motorola PowerPC 601 with PPC_OPCODE_601.
3264         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3265         Disassemble Motorola PowerPC 601 instructions as well as normal
3266         PowerPC instructions.
3267
3268 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3269
3270         * i960-dis.c (reg, mem): Just use a static array instead of
3271         calling xmalloc.
3272
3273 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3274
3275         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3276         condition name index if this is for a negated condition.
3277
3278         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3279         Floating point format for 'H' operand is backwards from normal
3280         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
3281         operands (fmpyadd and fmpysub), handle bizarre register
3282         translation correctly for single precision format.
3283
3284         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3285         or 'I' operands if the next format specifier is 'M' (fcmp
3286         condition completer).
3287
3288 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3289
3290         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3291         single number giving a bitmask for the MB and ME fields of an M
3292         form instruction.  Change NB to accept 32, and turn it into 0;
3293         also turn 0 into 32 when disassembling.  Seperated SH from NB.
3294         (insert_mbe, extract_mbe): New functions.
3295         (insert_nb, extract_nb): New functions.
3296         (SC_MASK): Mask out SA and LK bits.
3297         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3298         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
3299         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
3300         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3301         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3302         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
3303         (powerpc_macros): Define table of macro definitions.
3304         (powerpc_num_macros): Define.
3305
3306         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3307         if PPC_OPERAND_NEXT is set.
3308
3309 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3310
3311         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3312         char.  Retrieve contents using bfd_getl32 instead of shifting.
3313
3314 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3315
3316         * ppc-opc.c: New file.  Opcode table for PowerPC, including
3317         opcodes for POWER (RS/6000).
3318         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
3319         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3320         (CFILES): Add ppc-dis.c.
3321         (ppc-dis.o, ppc-opc.o): New targets.
3322         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3323
3324 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3325
3326         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3327         No space before 'u', 'f', or 'N'.
3328
3329 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3330
3331         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3332         farther than we should.
3333
3334         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3335
3336 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3337
3338         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3339
3340 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3341
3342         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3343         needs it, to prevent reading past the end of a section.
3344
3345 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3346
3347         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3348         Removed t,A case for la; always use t,A(b) case.
3349
3350 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3351
3352         From Ted Lemen <mellon@pepper.ncd.com>
3353         * mips-dis.c (print_insn_arg): Handle 'k'.
3354         * mips-opc.c: Make cache use k, not t.
3355
3356 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3357
3358         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
3359         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3360         FLOAT_FORMAT_CODE to put out floating point register names.
3361
3362 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3363
3364         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3365
3366 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3367
3368         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3369
3370 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3371
3372         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3373         larger than 32.  Moved dsxx32 variants first for disassembler.
3374
3375 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3376
3377         * z8kgen.c, z8k-opc.h: Add full lda information.
3378
3379 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
3380
3381         * hppa-dis.c (print_insn_hppa): Do not emit a space after
3382         movb instructions.  Any necessary space will be emitted by
3383         the code to handle nullification completers.
3384
3385 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3386
3387         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3388
3389 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3390
3391         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
3392         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
3393
3394 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3395
3396         * mips-opc.c: Correct lwu opcode value (book had it wrong).
3397
3398 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3399
3400         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3401         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3402
3403 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
3404
3405         * m88k-dis.c (m88kdis): comment change.  Remove space after
3406           printing mnemonic.
3407           (printop): handle new arg types DEC and XREG for m88110.
3408
3409 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
3410
3411         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3412         type for absolute branch addresses.  Delete special
3413         "ble" and "be" code in 'W' operand code.
3414
3415 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3416
3417         * mips-opc.c: Set hazard information correctly for branch
3418         likely instructions.
3419
3420 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3421
3422         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
3423         info->fprintf_func for printing and info->print_address_func for
3424         address output.
3425
3426 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3427
3428         * mips-opc.c: Set INSN_TRAP for tXX instructions.
3429
3430 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3431
3432         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3433         Corrected second case of "b" for disassembler.
3434
3435 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3436
3437         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
3438         to BFD swapping routines to correspond to BFD name changes.
3439
3440 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3441
3442         * mips-opc.c: Change div machine instruction to be z,s,t rather
3443         than s,t.  Change div macro to be d,v,t rather than d,s,t.
3444         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
3445         rem and remu which generates only the corresponding div
3446         instruction.  This is for compatibility with the MIPS assembler,
3447         which only generates the simple machine instruction when an
3448         explicit destination of $0 is used.
3449         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3450
3451 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3452
3453         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3454         WR_31 hazard for bal, bgezal, bltzal.
3455
3456 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3457
3458         * hppa-dis.c (print_insn_hppa): Use print function
3459         from within the disassemble_info, not fprintf_filtered.
3460
3461 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3462
3463         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
3464         Law, law@cs.utah.edu.)
3465
3466 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3467
3468         * mips-opc.c ("absu"): Removed.
3469         ("dabs"): Added.
3470
3471 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3472
3473         * mips-opc.c: Added r6000 and r4000 instructions and macros.
3474         Changed hazard information to distinguish between memory load
3475         delays and coprocessor load delays.
3476
3477 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3478
3479         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
3480
3481 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3482
3483         * configure.in: Don't pass cpu to config.bfd.
3484
3485 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3486
3487         * m88k-dis.c (m88kdis): Make class unsigned.
3488
3489 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
3490
3491         * alpha-dis.c (print_insn_alpha): One branch format case was
3492         missing the instruction name.
3493
3494 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3495
3496         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3497         Add the arch-specific auxiliary files.
3498         (OFILES): Remove the arch-specific auxiliary files
3499         and use BFD_MACHINES instead of DIS_LIBS.
3500         * configure.in: Set BFD_MACHINES based on --with-targets option.
3501
3502 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3503
3504         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
3505         for swc1.
3506
3507 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3508
3509         * sparc-opc.c: Change CONST to const to deal with gcc
3510         -Dconst=__const -traditional.
3511
3512 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3513
3514         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3515         coprocessor instructions out of #if 0, and made them use new
3516         argument type "C".
3517
3518 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3519
3520         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3521
3522 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
3523
3524         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3525         instruction, for use by the disassembler.
3526
3527         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
3528         hand-coded sign extensions that depended on 32-bit host ints.
3529         FIXME, we still depend on big-endian host bitfield ordering.
3530         (sparc_print_insn):  Set the insn_info_valid field, and the
3531         other fields that describe the instruction being printed.
3532
3533 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
3534
3535         * sparc-opc.c (call): Accept all 6 addressing modes valid for
3536         `jmp' instead of just one of them.
3537
3538 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3539
3540         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3541         (fput_fp_reg_r): Renamed from fput_reg_r.
3542         (fput_fp_reg): New function.
3543         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3544
3545         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3546
3547         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3548
3549 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3550
3551         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3552
3553         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3554         don't output a space.
3555
3556         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3557
3558 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
3559
3560         * mips-opc.c: New file, containing opcode table from
3561         ../include/opcode/mips.h.
3562         * Makefile.in: Add it.
3563
3564 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3565
3566         * m88k-dis.c: New file, moved in from gdb and changed to use the
3567         new dis-asm.h disassembler interface.
3568         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3569         (m88k-dis.o): New target.
3570
3571 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
3572
3573         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3574         argument string const char * to correspond to opcode/mips.h.
3575
3576 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
3577
3578         * mips-dis.c: Updated to account for name changes in new version
3579         of opcode/mips.h.
3580         * Makefile.in: Added header file dependencies.
3581
3582 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
3583
3584         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3585
3586 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3587
3588         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3589         extend, rather than shifts.
3590
3591 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
3592
3593         * Makefile.in: Undo 15 June change.
3594
3595 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
3596
3597         * m68k-dis.c (print_insn_arg):  Change return value to byte count
3598         or error code.
3599         * m68k-dis.c:  Re-write to detect invalid operands before
3600         printing anything, so we can handle this the same way we
3601         handle invalid opcodes.
3602
3603 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3604
3605         * sh-dis.c, sh-opc.h: Understand some more opcodes.
3606
3607 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
3608
3609         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3610         header files.
3611
3612 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3613
3614         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3615
3616         * configure.in: Do make sysdep.h link.
3617         * Makefile.in: Search ../include.  Don't search ../bfd.
3618
3619 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
3620
3621         Changes from Jeff Law, law@cs.utah.edu:
3622         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
3623         Do not print a space before the completers specified by
3624         'a' and 'd'.
3625
3626 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
3627
3628         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3629         defined, since gdb has been fixed.
3630
3631         Changes from Jeff Law, law@cs.utah.edu:
3632         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3633         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3634         be a *disassemble_info, not a *FILE.
3635         * hppa-dis.c: Support 'd', '!', and 'a'.
3636         * hppa-dis.c: Support 's' to extract a 2 bit space register.
3637         * hppa-dis.c: Delete cases which are no longer needed.
3638
3639 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
3640
3641         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3642
3643 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3644
3645         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3646         H8/300-H opcodes.
3647
3648 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
3649
3650         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3651         * configure.in:  No longer need to configure to get sysdep.h.
3652
3653 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
3654
3655         * Patches from Jeffrey Law <law@cs.utah.edu>.
3656         * hppa-dis.c: Support 'I', 'J', and 'K' in output
3657         templates for 1.1 FP computational instructions.
3658
3659 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3660
3661         * h8500-dis.c (print_insn_h8500): Address argument is type
3662         bfd_vma.
3663         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3664         Ditto.
3665
3666         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3667         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3668
3669         * sparc-dis.c (compare_opcodes): Move static declaration to
3670         top-level.
3671
3672 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3673
3674         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3675         instruction, remove unimp hack from 'l' argument.
3676
3677 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
3678
3679         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
3680         happy.
3681
3682 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
3683
3684         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3685         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3686         instructions.
3687
3688 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3689
3690         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
3691         arrays of string pointers to 2-d arrays of chars, to save
3692         space.
3693
3694 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
3695
3696         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3697         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3698
3699 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3700
3701         * hppa-dis.c: New file from Utah, adapted to new disassembler
3702         calling interface.
3703         * Makefile.in: Include it.
3704
3705 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3706
3707         * sh-dis.c, sh-opc.h: New files.
3708
3709 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3710
3711         * alpha-dis.c, alpha-opc.h: New files.
3712
3713 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3714
3715         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3716         value.
3717
3718 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
3719
3720         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3721
3722 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
3723
3724         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3725         const.
3726
3727 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
3728
3729         * sparc-dis.c: Use fprintf_func a few places where I forgot,
3730         and double percent signs a few places.
3731
3732         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3733
3734         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3735         Use info->print_address_func not print_address.
3736
3737         * dis-buf.c (generic_print_address): New function.
3738
3739 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3740
3741         * Makefile.in: Add sparc-dis.c.
3742         sparc-dis.c: New file, merges binutils and gdb versions as follows:
3743         From GDB:
3744             Add `add' instruction to the set that get checked
3745             for a preceding `sethi' in order to print an absolute address.
3746             * (print_insn):  Disassembly prefers real instructions.
3747             (is_delayed_branch):  Speed up.
3748             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
3749             Still missing some float ops, and needs testing.
3750             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3751             F_ALIAS.  Use printf, not fprintf, when not passing a file
3752             pointer...
3753             (compare_opcodes): Check that identical instructions have
3754             identical opcodes, complain otherwise.
3755         From binutils:
3756             * New 'm' arg.
3757             * Include reg_names.
3758         From neither:
3759             Use dis-asm.h/read_memory_func interface.
3760
3761 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
3762
3763         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3764           deliberately return non-zero to setjmp from longjmp.  Otherwise
3765           this code fails to compile.
3766
3767 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
3768
3769         * m68k-dis.c:  Fix prototype for fetch_arg().
3770
3771 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3772
3773         * dis-buf.c: New file, for new read_memory_func interface.
3774         Makefile.in (OFILES): Include it.
3775         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3776         Use new read_memory_func interface.
3777
3778 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3779
3780         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3781         * h8500-opc.h: Fix couple of opcodes.
3782
3783 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
3784
3785         * Makefile.in: add dvi & installcheck targets
3786
3787 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
3788
3789         * Makefile.in:  Update for h8500-dis.c.
3790
3791 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3792
3793         * h8500-dis.c, h8500-opc.h: New files
3794
3795 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
3796
3797         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
3798         ../include/dis-asm.h.
3799         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
3800         and ../gdb/m68k-pinsn.c).
3801         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
3802         and ../gdb/i386-pinsn.c).
3803         * m68881-ext.c:  New file.  Moved definition of
3804         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3805         * Makefile.in:  Adjust for new files.
3806         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
3807         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
3808         can be dis-assembled.
3809
3810 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3811
3812         * mips-dis.c (print_insn_arg): Now returns void.
3813
3814 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
3815
3816         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
3817         files that use the macros.
3818
3819 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3820
3821         * mips-dis.c: New file, from gdb/mips-pinsn.c.
3822         * Makefile.in (DIS_LIBS): Added mips-dis.o.
3823         (CFILES): Added mips-dis.c.
3824
3825 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3826
3827         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3828         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3829
3830 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
3831
3832         * Makefile.in:  Improve *clean rules.
3833         * configure.in:  Allow a default host.
3834
3835 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3836
3837         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3838         files include other sysdep files
3839
3840 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3841
3842         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3843
3844 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
3845
3846         * configure.in:  For host support, use ../bfd/configure.host
3847         so it stays in sync with the ../bfd/hosts database.
3848
3849 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3850
3851         * configure.in: use cpu-vendor-os triple instead of nested cases
3852
3853 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
3854
3855         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3856         *always* the wrong one.
3857
3858 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3859
3860         * z8kgen.c: added copyright info
3861
3862 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3863
3864         * z8k-dis.c (unparse_instr): prettier tabs
3865         * z8kgen.c -> z8k-opc.h: bug fixes in tables
3866
3867 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
3868
3869         * configure.in:  Add ncr* configuration.
3870         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
3871         picayune ANSI compilers happy.
3872
3873 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
3874
3875         * configure.in (i386):  Make i386 and i486 synonymous for now.
3876         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
3877
3878 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3879
3880         * Makefile.in (install): Fix typo.
3881
3882 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
3883
3884         * Makefile.in (make):  Remove obsolete crud.
3885         (sparc-opc.o):  Avoid Sun Make VPATH bug.
3886
3887 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
3888
3889         * Makefile.in: since there are no SUBDIRS, remove rule and
3890         references of subdir_do.
3891
3892 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3893
3894         * Makefile.in (install): Get the library name right here too.
3895         Don't install bfd.h, since it's unrelated to this library.  No
3896         subdirs to recurse into, either.
3897         (CFILES): The source file has a .c suffix, not .o.
3898
3899         * sparc-opc.c: New file, moved from BFD.
3900         * Makefile.in (OFILES): Build it.
3901
3902 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
3903
3904         * z8k-dis.c: fixed forward refferences of some declarations.
3905
3906 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
3907
3908         * Makefile.in: get the name of the library right
3909
3910 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3911
3912         * z8k-dis.c: knows how to disassemble z8k stuff
3913         * z8k-opc.h: new file full of z8000 opcodes
3914
3915 \f
3916 Local Variables:
3917 version-control: never
3918 End: