1 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
4 * disassemble.c (disassembler): Add support for FR30 target.
7 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
10 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
11 CGEN_OPERAND_SEM_ONLY.
13 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
15 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
17 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
19 * po/opcodes.pot: Regenerate.
20 * po/POTFILES.in: Regenerate.
21 * fr30-opc.c: Regenerate.
22 * fr30-opc.h: Regenerate.
24 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
26 * m32r-asm.c: Regenerate.
29 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
31 * configure.in: Added case for bfd_fr30_arch.
32 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
33 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
34 (CLEANFILES): Added stamp-fr30.
36 * fr30-asm.c: New file.
37 * fr30-dis.c: New file.
38 * fr30-opc.c: New file.
39 * fr30-opc.h: New file.
40 * po/POTFILES.in: Regenerated
41 * po/opcodes.pot: Regenerated
45 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
47 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
48 to bcl8,bncl8 entries.
49 (macro_insn_table_entries): Add FILL_SLOT attribute
50 to bcl8r,bncl8r entries.
53 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
55 * configure.in: detect cygwin* instead of cygwin32*
56 * configure: regenerate
58 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
60 * mips-opc.c (IS_M): Added.
63 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
65 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
69 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
72 * cgen-asm.in (insert_1): New function.
73 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
74 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
75 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
76 * cgen-dis.in (extract_1): New function.
77 (extract_normal): buf_ctrl renamed to ex_info, update type.
78 Progress on handling of CGEN_INT_INSN_P.
79 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
80 Update handling of CGEN_INT_INSN_P. Handle errors from
81 @arch@_cgen_extract_operand.
82 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
83 (default_print_insn): Renamed from print_insn.
84 Handle ! CGEN_INT_INSN_P.
85 (print_insn_@arch@): Handle error returns from print_insn.
86 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
87 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
88 (@arch@_cgen_lookup_get_insn_operands): Ditto.
90 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
93 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
95 * m10300-opc.c: Allow autoincrement stores using the same register
96 for source and destination operands.
98 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
100 * m10300-opc.c: DSP instrutions which only write to one general
101 register have no restrictions on matching operands.
103 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
106 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
108 * m32r-opc.h,m32r-opc.c: Regenerate.
111 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
113 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
116 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
118 * i386-dis.c (OP_3DNowSuffix): New static function.
121 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
122 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
123 (insn_codep): New static variable.
124 (print_insn_x86): Init insn_codep after prefixes.
125 (grps): Add GRP14 entries for prefetch, prefetchw.
128 From Jeff B Epler <jepler@usgs.gov>
129 * i386-dis.c (Suffix3DNow): New table.
131 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
133 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
135 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
137 * d10v-dis.c (print_operand): If num is nonzero, then
138 add OPERAND_ACC1, not OPERAND_ACC0.
140 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
142 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
145 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
147 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
151 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
153 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
156 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
158 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
160 start-sanitize-nortel-ppc750
161 1998-09-09 Michael Meissner <meissner@cygnus.com>
163 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
166 end-sanitize-nortel-ppc750
167 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
169 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
171 (print_insn_little_arm): Detect Thumb symbols in elf object
174 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
176 * alpha-dis.c (print_insn_alpha): Use the machine type to
177 decide which PALcode set to include.
179 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
181 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
183 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
185 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
186 MSUB and MSUBS instructions.
189 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
191 * mips-opc.c: Insert contents of vu0.h, rather than including it.
193 * Makefile.am: Rebuild dependencies.
197 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
199 * ppc-opc.c (powerpc_operands): Omit parens around additions in
202 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
204 start-sanitize-coldfire
205 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
206 ColdFire, as below for mulsl and mulul.
208 end-sanitize-coldfire
209 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
210 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
211 +, -, and d for ColdFire.
213 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
214 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
215 (extract_mbe): Likewise.
217 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
219 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
221 * m10300-opc.c: First cut at UDF instructions.
223 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
225 * m32r-opc.c: Regenerate (remove semantic descriptions).
227 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
229 * arm-dis.c (print_insn_big_arm): Fix indentation.
230 (print_insn_little_arm): Likewise.
232 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
234 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
236 (print_insn_little_arm): Likewise.
238 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
240 Move all global state data into opcode table struct, and treat
241 opcode table as something that is "opened/closed".
242 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
243 (cgen_asm_init): Delete.
244 (cgen_set_parse_operand_fn): New function.
245 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
246 (cgen_dis_init): Delete.
247 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
248 (cgen_current_{opcode_table_mach,endian}): Delete.
249 start-sanitize-cygnus
250 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
251 * cgen-dis.in (all fns): Ditto.
252 * cgen-opc.in (all fns): Ditto.
254 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
256 start-sanitize-cygnus
257 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
259 * cgen-dis.in (print_normal): Split into two.
260 (print_address): New function.
261 (extract_insn_normal): Clarify insn_value arg.
262 (print_int_insn): Renamed from print_insn.
263 (print_insn): New arg.
264 (print_insn_@arch@): Open opcode table if not already done so.
265 Move reading of insn into print_insn.
268 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
270 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
274 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
276 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
277 accept an accumulator choice.
278 * m32r-opc.c,m32r-opc.h: Regenerate.
281 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
283 * m10300-opc.c: Add entries for "no_match_operands" field in
287 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
289 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
293 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
295 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
298 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
300 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
302 * m10300-opc.c: Add autoincrement memory loads/stores.
306 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
308 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
309 phmsubh respectively.
312 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
314 start-sanitize-cygnus
315 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
317 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
318 @arch_cgen_get_int_operand.
319 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
320 Update call to @arch@_cgen_insert_operand.
321 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
322 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
323 (extract_insn_normal): New arg `pc', callers updated.
324 Update call to @arch@_cgen_extract_operand.
325 (print_insn): Update call to CGEN_EXTRACT_FN.
327 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
330 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
332 * m10300-opc.c: Fix load to sp and store from sp for the am33.
333 Add more multimedia instructions.
335 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
337 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
342 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
344 * mips-opc.c (pref): Enabled for the r5900.
347 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
349 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
351 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
353 (OP_J): Remove unnecessary subtraction when 16-bit displacement
354 will be masked later.
357 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
359 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
362 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
364 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
365 from raw register #s to symbolic names to make debugging easier.
368 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
370 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
372 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
374 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
375 start-sanitize-cygnus
376 * Makefile.am (CGENDIR): Set via configure.
377 (CGEN): New variable.
378 (CGENFILES): object.scm renamed to cos.scm.
379 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
380 (stamp-m32r): Pass prefix to run-cgen.
381 * Makefile.in: Regenerate.
382 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
383 * cgen-dis.in: Ditto.
384 * cgen-opc.in: Ditto.
385 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
386 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
387 * configure: Regenerate.
391 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
393 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
395 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
397 * m10300-opc.c: Reorder more instructions so that we do not
398 accidentally match a mn10300 instruction when we really
399 wanted an am33 instruction.
402 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
404 * m10300-dis.c: Only recognize instructions from the currently
406 * m10300-opc.c: Add field indicating the particular variant of
407 the mn10300 each instruction is available on.
409 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
411 * configure.in: For bfd_vax_arch, build vax-dis.lo.
412 * Makefile.am: Rebuild dependencies.
413 (CFILES): Add vax-dis.c.
414 (ALL_MACHINES): Add vax-dis.lo.
415 * aclocal.m4: Rebuild with current libtool.
416 * configure, Makefile.in: Rebuild.
418 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
420 * vax-dis.c: New file, from work by Pauline Middelink
421 <middelin@polyware.iaf.nl>.
422 * disassemble.c (ARCH_vax): Define if ARCH_all.
423 (disassembler): Add case for ARCH_vax.
424 * makefile.vms: Support compilation on vms/vax.
427 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
429 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
430 the DVP_OPERAND_RELOC_11_S4 relocation.
434 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
436 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
438 (disassemble): Correctly handle FMT_D10 instructions.
440 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
441 am33 shift instructions.
443 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
445 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
446 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
448 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
449 (mn10300_opcodes): Reorder so as to try and select opcodes from
450 the core chip when multiple alternatives exist. Change several
451 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
452 "macbu" instructions. Fix typos in a couple DSP instructions too.
455 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
457 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
458 related to sign extension and the size of ints.
460 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
462 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
463 instructions. Support (sp) addressing mode by expanding it into
467 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
469 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
470 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
471 be used as immediate values.
475 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
477 * m10300-opc.c: Support 4 byte DSP instructions.
480 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
482 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
485 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
487 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
490 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
492 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
495 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
497 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
498 found on the mn10300.
501 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
503 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
506 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
508 * mips-dis.c (print_insn_little_mips): Previously, instruction
509 printing references the symbol table to determine whether the
510 instruction resides in a block regular instructions or mips16
511 instructions. However, when the disassembler gets used in other
512 environments where the symbol table is not present, we no longer
513 rely in the symbol table, rather, use the low bit of the
514 instructions address to guess. There should be no change for usage
515 of the disassembler in host based programse, gdb ,objdump.
516 (print_insn_big_mips): ditto.
517 (print_insn_mips): ditto
519 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
521 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
523 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
526 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
527 operands for the am33.
528 (mn10300_opcodes): Add new instructions from the am33.
530 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
532 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
534 * i386-dis.c (index16): Add '%' to register names. Use ','
537 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
539 * i386-dis.c: Don't print opcode suffix when we can figure out the
540 size (and gas can!) by register operands, or from the default
542 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
544 (dis386, dis386_twobyte, grps): Use new suffix macros.
545 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
546 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
547 order of cmps operands to agree with Intel docs. Correct operand
548 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
549 agree with Intel docs.
550 (print_insn_x86): Print orphan fwait before other prefixes.
551 Return correct byte count for orphan fwait with prefixes. Don't
552 print `bound' operands in reverse order.
553 (ckprefix): Stop accumulating prefixes if we get fwait.
554 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
556 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
558 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
559 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
561 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
563 Fix problems when bfd_vma is wider than long.
564 * i386-dis.c: Make op_address and start_pc unsigned.
565 (set_op): Make parameter unsigned.
566 (print_insn_x86): Cast to bfd_vma when passing a value to
568 * ns32k-dis.c (CORE_ADDR): Don't define.
569 (print_insn_ns32k): Change type of addr to bfd_vma. Use
570 bfd_scan_vma to read back address.
571 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
573 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
574 (NEXTULONG): New definition.
575 (print_insn_m68k): Avoid overflow when computing third argument of
577 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
578 Use disp instead of val to store offset values.
579 (print_indexed): Use base_disp instead of word to store base
580 displacement, to avoid overflow.
581 * m10300-dis.c (disassemble): Cast value to long when computing
582 pc-relative address, to get correct sign extension.
584 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
586 * m32r-opc.c: Regenerate.
588 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
590 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
591 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
593 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
595 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
597 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
599 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
601 (OP_DSreg): Rename from OP_DSSI.
602 (OP_ESreg): Rename from OP_ESDI.
603 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
605 (append_seg): Rename from append_prefix.
606 (ptr_reg): New function.
607 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
609 (PREFIX_ADDR): Rename from PREFIX_ADR.
610 (float_reg): Add non-broken opcodes for people who don't want
613 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
615 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
618 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
620 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
622 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
624 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
625 0; produce error message for shifts of size 32 (or 64 for 64-bit
626 shifts), because the hardware doesn't support them.
629 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
631 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
634 * vu0.h (sqc2): Fix opcode.
636 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
640 start-sanitize-cygnus
641 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
643 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
644 Change pinfo to use WR_HILO.
647 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
649 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
650 LONG_2, LONG_2b formats to use this new operand.
652 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
654 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
656 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
658 * sparc-dis.c (print_insn_sparc): big endian instruction / little
661 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
663 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
664 and SHORT_B3b formats to use Rb instead of Ra.
666 Add FLAG_MUL16 to MUL2XH opcode.
668 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
669 to existing 1.1.1 parallelisation prohibition procedure.
671 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
673 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
674 * cgen-dis.in (extract_normal): Likewise.
675 * m32r-asm.c,m32r-dis.c: Regenerate.
678 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
680 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
684 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
686 * mips-opc.c (multu1): Add two operand variant for the r5900.
689 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
691 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
692 with a shift count of 0.
695 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
697 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
699 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
701 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
702 (_print_insn_mips): Likewise.
703 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
707 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
709 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
710 (cgen_hw_lookup_by_num): New function.
713 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
716 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
718 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
720 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
722 * sparc-dis.c (print_insn_sparc): Always fetch instructions
723 as big-endian on SPARClite.
726 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
728 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
730 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
734 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
736 * d30v-opc.c (pre_defined_register): Remove alias for r0.
739 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
741 * mips-opc.c (break): Added 20-bit single-operand break
742 instruction for R5900 only.
745 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
747 * po/Make-in (install-info): New target.
749 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
751 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
752 * configure: Rebuild.
754 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
756 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
757 variety of ISA2 instructions to set bottom ten bits of trap code.
759 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
761 * Makefile.am (config.status): Add explicit target so that
762 config.status depends upon bfd/configure.in.
763 * Makefile.in: Rebuild.
765 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
767 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
768 instructions to set bottom ten bits of break code.
769 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
770 for above optional argument.
772 start-sanitize-cygnus
773 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
775 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
776 * m32r-opc.h: Regenerate.
779 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
781 * makefile.vms: Run dec c with /nodebug.
783 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
785 * Makefile.in: Rebuilt.
786 * Makefile.am: Regenerated dependencies with mkdep.
788 * opintl.h (_): Define as dgettext.
790 start-sanitize-cygnus
791 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
793 * configure.in: Add support for --enable-cgen-maint.
794 * Makefile.am (M32R_DEPS): New variable.
795 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
796 * aclocal.m4: Regenerate.
797 * Makefile.in: Regenerate.
798 * configure: Regenerate.
800 * Makefile.am (CGENFILES): Add minsn.scm.
803 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
805 * cgen-asm.c: Internationalised.
806 start-sanitize-cygnus
807 * cgen-asm.in: Internationalised.
808 * cgen-opc.in: Internationalised.
810 * m32r-asm.c: Internationalised.
811 * m32r-dis.c: Internationalised.
812 * m32r-opc.c: Internationalised.
814 * aclocal.m4: Regenerated.
815 * configure: Regenerated.
816 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
817 * Makefile.in: Rebuild.
818 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
819 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
821 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
823 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
825 * aclocal.m4, configure: Rebuild with current tools.
827 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
829 * opintl.h: New file - contains internationalisation macros used
830 by source files in this directory.
831 * po/: New subdirectory - contains internationalisation files.
832 * po/Make-in: New file - Makefile constructor.
833 * po/POTFILES.in: New file - list of files in opcodes directory
834 that should be scan for internationalisation macros.
835 * po/opcodes.pot: New file - list of internationisation strings
836 found in files mentioned in po/POTFILES.in.
837 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
838 entry. Add intl directory to include paths.
839 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
840 HAVE_STRCPY, HAVE_LC_MESSAGES
841 * configure.in: Add rule to build Makefile in po subdirectory.
842 * Makefile.in: Rebuilt.
843 * aclocal.m4: Rebuilt.
844 * config.in: Rebuilt.
845 * configure: Rebuilt.
846 * alpha-opc.c: Internationalised.
847 * arc-dis.c: Internationalised.
848 * arc-opc.c: Internationalised.
849 * arm-dis.c: Internationalised.
850 * cgen-asm.c: Internationalised.
851 * d30v-dis.c: Internationalised.
852 * dis-buf.c: Internationalised.
854 * dvp-dis.c: Internationalised.
855 * dvp-opc.c: Internationalised.
857 * h8300-dis.c: Internationalised.
858 * h8500-dis.c: Internationalised.
859 * i386-dis.c: Internationalised.
860 * m10200-dis.c: Internationalised.
861 * m10300-dis.c: Internationalised.
862 * m68k-dis.c: Internationalised.
863 * m88k-dis.c: Internationalised.
864 * mips-dis.c: Internationalised.
865 * ns32k-dis.c: Internationalised.
866 * opintl.h: Internationalised.
867 * ppc-opc.c: Internationalised.
868 * sparc-dis.c: Internationalised.
869 * v850-dis.c: Internationalised.
870 * v850-opc.c: Internationalised.
872 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
874 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
875 (asm_hash_table_entries): New variable.
876 (cgen_asm_init): Free asm_hash_table_entries.
877 (hash_insn_array,hash_insn_list): New functions.
878 (build_asm_hash_table): Use them. Hash macro insns as well.
879 (cgen_asm_lookup_insn): Update.
880 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
881 (dis_hash_table_entries): New variable.
882 (cgen_dis_init): Free dis_hash_table_entries.
883 (hash_insn_array,hash_insn_list): New functions.
884 (build_dis_hash_table): Use them. Hash macro insns as well.
885 (cgen_dis_lookup_insn): Update.
886 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
887 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
888 (cgen_macro_insn_count): New function.
889 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
890 All callers updated. Sanity check result of extract fn.
891 (@arch@_cgen_get_insn_operands): Change result type to void.
892 Delete args insn_value, length. New arg fields. All callers updated.
893 (@arch@_cgen_lookup_get_insn_operands): New function.
894 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
896 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
898 * i386-dis.c (OP_DSSI): Print segment override.
901 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
903 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
907 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
909 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
913 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
915 * vu0.h (vlqd, vlqi): Update per revised specs.
919 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
921 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
922 (vif_operands): Update.
923 (vif_get_unpackloc): Delete.
924 (state_vif_unpackloc{,_star_p}): Delete.
925 (dvp_opcode_init_parse): Update.
926 (vif_unpack_len_value): Avoid divide by zero.
930 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
932 * vu0.h: Specs changed for VCALLMSR bit pattern.
933 * mips-dis.c: (print_insn_arg) Matching change.
936 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
938 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
941 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
943 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
944 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
945 * configure.in: Define and substitute WIN32LDFLAGS and
947 * aclocal.m4: Rebuild with new libtool.
948 * configure, Makefile.in: Rebuild.
951 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
953 * vu0.h: Corrected bit pattern for VMAXI opcode.
956 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
958 * m32r-opc.c: Regenerate.
961 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
963 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
964 (dvp_expand_macro): Implement.
965 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
966 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
969 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
971 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
972 before trying to copy it.
973 * Makefile.in: Rebuild.
975 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
977 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
980 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
982 * m32r-opc.c: Fix bit patterns for SAT and SATB.
985 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
987 * ns32k-dis.c (bit_extract_simple): New function to extract bits
988 from an arbitrary valid buffer instead of fetching them on demand
990 (invalid_float): use bit_extract_simple() instead of bit_extract().
993 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
995 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
996 * m32r-opc.h: Add extra control registers.
999 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1001 From H.J. Lu <hjl@gnu.org>:
1002 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1005 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1007 * Branched binutils 2.9.
1009 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1011 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1012 disassembling last 4 bytes of a section.
1014 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1016 Fix some gcc -Wall warnings:
1017 * arc-dis.c (print_insn): Add casts to avoid warnings.
1018 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1019 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1021 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1022 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1023 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1024 (parse_ffstreg, parse_vif_mode): Likewise.
1026 * m10200-dis.c (disassemble): Likewise.
1027 * m10300-dis.c (disassemble): Likewise.
1028 * ns32k-dis.c (print_insn_ns32k): Likewise.
1029 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1030 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1031 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1032 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1033 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1035 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1036 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1037 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1039 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1040 start-sanitize-tic80
1041 * tic80-dis.c (print_one_instruction): Likewise.
1043 * w65-dis.c (print_operand): Likewise.
1044 * z8k-dis.c (fetch_data): Likewise.
1045 * a29k-dis.c: Add return type for find_byte_func_type.
1046 * arc-opc.c: Include <stdio.h>. Remove declarations of
1047 insert_multshift and extract_multshift.
1048 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1050 (extract_value): Fully parenthesize expression.
1052 * dvp-opc.c: Include <ctype.h>.
1053 (print_sdest): Add default case to switch.
1055 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1056 * h8500-opc.h (h8500_table): Fully bracket initializer.
1057 * w65-opc.h (optable): Likewise.
1058 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1059 * i386-dis.c (OP_E): Initialize local variables.
1060 * m10200-dis.c (print_insn_mn10200): Likewise.
1061 * mips-dis.c (print_insn_mips16): Likewise.
1062 * sh-dis.c (print_insn_shx): Likewise.
1063 * v850-dis.c (print_insn_v850): Likewise.
1064 * ns32k-dis.c (print_insn_arg): Declare.
1065 (get_displacement, invalid_float): Declare.
1066 (list_search, sign_extend, flip_bytes): Declare return type.
1067 (get_displacement): Likewise.
1068 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1070 (print_insn_ns32k): Make i unsigned.
1071 (invalid_float): Make static. Declare type of val.
1072 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1073 on each for iteration.
1074 * tic30-dis.c (get_indirect_operand): Likewise.
1075 * z8k-dis.c (print_insn_z8001): Declare return type.
1076 (print_insn_z8002): Likewise.
1077 (unparse_instr): Fix sprintf format strings.
1079 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1081 * mips-opc.c: Add "sync.l" and "sync.p".
1084 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1086 * dvp-opc.c (extract_vif_datalen): Rewrite.
1087 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1089 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1091 * dvp-dis.c (print_insn): Print unpack address in hex.
1092 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1093 Don't skip over '*', just record it.
1094 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1095 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1096 Don't skip over '*', just record it.
1097 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1098 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1099 (vif_opcodes): Likewise.
1100 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1101 (vif_macros,vif_macro_count): New globals.
1102 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1103 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1104 (vif_get_wl_cl): New function.
1105 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1108 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1110 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1111 default m68k variant to recognize.
1113 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1114 (ctrl, cobr, mem, ea): Likewise.
1115 (print_addr): Likewise. Remove cast.
1116 (ea): Cast argument of print_addr to bfd_vma.
1118 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1120 (cgen_parse_unsigned_integer): Likewise.
1121 (cgen_parse_address): Likewise.
1123 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1125 * i960-dis.c (ctrl): Add full braces to structure initialization.
1126 (cobr, mem, reg): Likewise.
1127 (ea): Correct parenthesization in expression.
1129 * cgen-asm.c: Include <ctype.h>.
1130 (build_asm_hash_table): Remove unused local variable i.
1131 (cgen_parse_keyword): Add casts to avoid warnings.
1133 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1134 symbol. Fix indentation.
1135 (print_insn_little_arm): Likewise.
1137 start-sanitize-r5900
1138 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1140 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1144 start-sanitize-m32rx
1145 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1147 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1152 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1154 * dvp-opc.c (vif_operand_datalen_special): New global.
1157 start-sanitize-r5900
1158 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1160 * vu0.h (vcallms): Use 'O' for call target operand.
1161 * mips-dis.c (print_insn_arg): Handle 'O'.
1164 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1166 * configure.in: Use AM_DISABLE_SHARED.
1167 * aclocal.m4, configure: Rebuild with libtool 1.2.
1169 start-sanitize-r5900
1170 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1172 * mips-dis.c: Change '%' to '#' in r5900 support.
1176 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1178 These patches are courtesy of Jonathan Walton and Tony Thompson
1179 (athompso@cambridge.arm.com).
1181 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1184 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1185 both the offset and the label closest to the destination.
1187 start-sanitize-r5900
1188 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1190 * vu0.h: New file with cop2/vu0 instructions.
1191 * mips-opc.c: Include vu0.h.
1192 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1194 (print_insn_mips): Do not emit a tab after an instruction if the
1195 first arg is an instruction completer (&). If the next arg is an
1196 escape character (%), then print the next arg verbatim.
1197 * Makefile.am (mips-opc.lo): Depend on vu0.h
1201 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1203 * dvp-opc.c (vif_opcodes): Add stcycl.
1205 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1207 * dvp-dis.c (print_dma): Change length from 16 to 8.
1210 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1212 * m32r-opc.h: Regenerate.
1215 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1217 * dvp-opc.c (print_dest1): Print dest spec again.
1218 (print_vfreg,print_accdest): Likewise.
1219 (vif_unpack_len): Round result up to word boundary.
1222 start-sanitize-vr4320
1223 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1225 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1227 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1229 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1234 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1236 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1237 (print_insn): Do mask comparison on proper opcode word.
1238 Print unsigned values in hex.
1239 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1240 (parse_bc): Catch missing dest.
1241 (parse_vfreg): Replace atoi call with strtol.
1242 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1243 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1244 (extract_gif_eop): New function.
1245 (gif_operands): Update eop entry.
1246 (VGIFOP,VGIFNREGS): Fix calcs.
1247 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1248 (gif_regs): Add entry for unused 11 case.
1249 (print_gif_regs): Print empty list instead of nothing.
1250 (extract_gif_nloop): Fix value calc.
1251 (print_gif_nloop): Always print value, even if 0.
1252 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1253 (vif_operands): Use them for wl,cl fields.
1254 (state_vif_wl,state_vif_cl): New static locals.
1255 (parse_vif_mode): Handle numeric args.
1256 (vif_unpack_len_value,vif_unpack_len): New functions.
1257 (vif_insn_len): Call vif_unpack_len.
1260 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1262 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1264 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1266 * cgen-asm.in: Move insertion of generated routines to top of file.
1267 (insert_normal): Add prototype. Delete `shift' arg.
1268 * cgen-dis.in: Move insertion of generated routines to top of file.
1269 (extract_normal): Add prototype. Delete `shift' arg.
1270 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1271 (print_keyword): Add prototype. Fix type of `attrs' arg.
1273 start-sanitize-vr4320
1274 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1276 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1277 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1280 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1282 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1283 assume that info->symbols is non-empty.
1285 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1287 * alpha-opc.c (cvtqs) There is no such thing.
1288 (cvttq): Missing most of the /*d variants.
1290 start-sanitize-r5900
1291 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1293 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1295 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1296 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1299 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1301 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1302 delayed branches or jumps.
1305 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1307 * dvp-opc.c (vif_operands): Add unpack[u] support.
1308 (vif_opcodes): Ditto.
1309 (*_vif_imrubits): Renamed from *_vif_imrbits.
1311 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1313 * dvp-dis.c (print_insn): Handle word number.
1314 Handle mips address vs vu address.
1315 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1316 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1317 ({insert,extract}_dma_addr): Fix word ofset.
1318 ({insert,print}_gif_regs): Fix encode/decode.
1321 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1323 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1325 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1326 * tic30-dis.c (print_branch): Likewise.
1328 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1329 * dvp-dis.c (dvp_info_mach_type): New function.
1330 (print_insn_dvp): Call it.
1331 (print_vif): Return length of 4 if mpg or direct insn so following
1332 insns get properly disabled.
1333 (print_gif): Fix word order.
1334 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1335 (gif_operands): Fix word order.
1336 (gif_opcodes): Likewise.
1337 ({insert,extract,print}_gif_regs): Likewise.
1338 (gif_regs): Add new register number/name changes.
1339 (dma_opcodes): Add dmarefe insn.
1342 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1344 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1345 saved_symbol code as it is no longer needed.
1347 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1349 * cgen-asm.c: Include symcat.h.
1350 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1352 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1355 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1357 * dvp-opc.c (extra_dma_flags): Fix typos.
1358 (dma_operands): Fix word numbers.
1359 (dma_opcodes): Likewise.
1360 ({insert,extract}_dma_flags): Likewise.
1363 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1365 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1368 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1370 * dvp-dis.c (print_gif): Complete.
1371 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1372 (state_gif_{nregs,regs,nloop}): New static locals.
1373 (*_gif_*): Complete.
1374 (dvp_opcode_init_{parse,print}): Init gif state locals.
1375 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1376 (vif_insn_len): Handle `unpack'.
1377 ({insert,extract}_dma_flags): Complete.
1380 start-sanitize-r5900
1381 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1383 * mips-opc.c (mula.s): Renamed from multa.s.
1386 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1388 * m32r-opc.[ch]: Regenerate.
1391 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1393 * dvp-opc.c (dma_operands): Rewrite.
1394 (dma_operand_{count,addr}): New globals.
1395 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1396 (insert_dma_addr): Insert value into insn.
1397 (extract_dma_addr): Extract value from insn.
1399 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1401 * dvp-dis.c (print_vu): Handle loi insns.
1402 (print_insn): Likewise.
1403 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1404 (vu_operands): Make LDEST1 a FAKE operand.
1405 (parse_dest1): Allow elided argument.
1406 (print_dest1): Don't print the argument.
1408 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1410 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1411 (print_vfreg): Don't print dest spec.
1412 (parse_accdest): Dest spec is optional.
1413 (print_accdest): Don't print dest spec.
1416 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1418 * Makefile.am (CGENFILES): Update.
1419 * Makefile.in: Regenerate.
1420 * cgen-asm.in (insert_normal): Result is error message now.
1421 Validate value to be inserted.
1422 (insert_insn_normal): Result is error message now.
1423 (@arch@_cgen_assemble_insn): Update.
1424 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1425 arguments. Don't perform validation here.
1426 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1428 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1430 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1431 operand instance list.
1432 * m32r-opc.c: Regenerate.
1434 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1436 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1437 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1439 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1441 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1443 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1445 * configure.in: Get the version number from BFD.
1446 * configure: Rebuild.
1448 From H.J. Lu <hjl@gnu.org>:
1449 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1450 * Makefile.in: Rebuild.
1452 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1454 * m32r-opc.c: Regenerate.
1455 * m32r-opc.h: Regenerate.
1457 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1459 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1460 Ignore ALIAS insns if asked to.
1461 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1462 * m32r-opc.c: Regenerate.
1465 * dvp.opc.c: Nicely format opcode tables.
1466 (vu_operands): New element UFLAGS.
1467 (parse_uflags,print_uflags): New functions.
1468 (vu_upper_opcodes): Add UFLAGS to all insns.
1471 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1473 Fix rac to accept only a0:
1474 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1475 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1476 Introduce OPERAND_GPR.
1477 * d10v-dis.c (print_operand): Likewise.
1479 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1481 * cgen-opc.in: New file.
1482 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1483 * Makefile.am (CGENFILES): Add cgen-opc.in.
1484 * Makefile.in: Regenerate.
1486 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1487 (cgen_hw_lookup): Make result const.
1489 * cgen-dis.in (*): Use PTR instead of void *.
1490 (print_insn): Delete unused vars `i', `syntax'.
1492 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1495 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1497 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1498 (vif_opcodes): Update renamed insns.
1499 * dvp-dis.c (*): Likewise.
1502 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1504 * configure, aclocal.m4: Rebuild with new libtool.
1506 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1508 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1509 instructions use a PC relative branch, not absolute.
1511 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1513 * configure.in: Set libtool_enable_shared rather than
1514 libtool_shared. Remove diversion hack.
1515 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1517 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1519 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1520 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1522 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1524 * tic30-dis.c: New file.
1525 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1526 * configure.in: Handle bfd_tic30_arch.
1527 * Makefile.am: Rebuild dependencies.
1528 (CFILES): Add tic30-dis.c
1529 (ALL_MACHINES): Add tic30-dis.lo.
1530 * configure, Makefile.in: Rebuild.
1532 start-sanitize-m32rx
1533 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1535 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1536 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1537 macwhi-a and macwlo-a instructions.
1541 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1543 * dvp-opc.c, fixed encoding of a bunch of instructions to
1544 be consistent with the asmvu assembler (and inconsistent
1545 with the specification).
1547 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1549 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1550 in the opcode table. The pkemscalf instruction must come first.
1552 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1554 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1557 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1559 * m32r-opc.h (HAVE_CPU_M32R): Define.
1562 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1564 * dvp-dis.c, dvp-opc.c: New files.
1565 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1566 * configure: Regenerate.
1567 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1568 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1569 (mips-dis.lo): Compile with @archdefs@.
1570 * Makefile.in: Regenerate.
1571 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1572 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1575 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1577 * v850-opc.c (insertion routines): If both alignment and size is
1578 wrong then report this.
1580 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1582 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1583 Only recognize instructions for the current target_processor.
1585 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1587 * d10v-dis.c (PC_MASK): Correct value.
1588 (print_operand): If there's a reloc, don't calculate the
1589 address because they could be in different sections.
1591 start-sanitize-cygnus
1592 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1594 * cgen.sh: Rewrite to be like simulator's version.
1595 * Makefile.am (cgen): Update call to cgen.sh.
1596 * Makefile.in: Regenerate
1599 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1601 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1602 instruction after the 4650's "mul" instruction; nobody's using the
1603 4010 these days. If object files someday indicate which processor
1604 variant they're intended for, we can do a better job at this.
1606 start-sanitize-r5900
1607 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1609 * mips-opc.c (c.lt.s): Add r5900 variant.
1613 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1615 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1616 table provided entry size. Use CGEN_INSN_MNEMONIC.
1617 (cgen_parse_keyword): Rewrite.
1618 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1619 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1620 * cgen-opc.c: Clean up pass over `struct foo' usage.
1621 (cgen_keyword_lookup_value): Handle "" entry.
1622 (cgen_keyword_add): Likewise.
1623 start-sanitize-cygnus
1624 * Makefile.am: Add cgen support.
1625 * Makefile.in: Regenerate.
1626 * configure.in: Add cgen support.
1627 * configure: Regenerate.
1628 * aclocal.m4: Regenerate.
1629 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1632 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1634 * mips-opc.c: Add FP_D to s.d instruction flags.
1636 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1638 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1640 start-sanitize-tic80
1641 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1643 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1644 PC relative offset forms before the 15 bit forms. An assembler command
1645 line option now chooses the default.
1648 start-sanitize-r5900
1649 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1651 * mips-opc.c: Add many missing r5900 instructions.
1654 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1656 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1657 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1659 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1661 * configure: Only build libopcodes shared if --enable-shared's value
1662 was `yes', or was set to `*opcodes*'.
1663 * aclocal.m4: Likewise.
1664 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1665 original source of this bit of code. It's not clear what the best fix
1668 start-sanitize-r5900
1669 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1671 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1673 start-sanitize-tic80
1674 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1676 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1677 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1678 offset forms before the 15 bit forms, to default to the long forms.
1681 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1683 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1685 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1687 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1688 symbol if none is present.
1689 (print_insn_big_arm): Prevent examination of stored symbol if
1692 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1694 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1696 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1698 * disassemble.c: Remove disasm_symaddr() function.
1700 * arm-dis.c: Use info->symbol instead of info->flags to determine
1701 if disassmbly should be in Thumb or Arm mode.
1703 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1705 * arm-dis.c: Add support for disassembling Thumb opcodes.
1706 (print_insn_thumb): New function.
1708 * disassemble.c (disasm_symaddr): New function.
1710 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1711 (thumb_opcodes): Table of Thumb opcodes.
1713 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1715 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1717 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1718 and 'v' as operand types.
1720 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1722 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1723 <olivier.carmona@di.epfl.ch>.
1724 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1725 which has a two word opcode with a one word argument.
1727 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1729 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1730 unsigned, not signed.
1731 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1733 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1735 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1736 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1737 (ftrv): Slay the cut-and-paste monster.
1739 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1741 * d10v-dis.c (print_operand):
1742 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1744 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1746 * d10v-opc.c (OPERAND_FLAG): Split into:
1747 (OPERAND_FFLAG, OPERAND_CFLAG) .
1751 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1753 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1754 field for all INSN_MACRO's.
1755 * mips16-opc.c: same
1757 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1759 * mips-opc.c (sync,cache): These are 3900 insns.
1761 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1763 sh-opc.h (sh_table): Remove ftst/nan.
1765 start-sanitize-cygnus
1766 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1768 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1769 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1771 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1775 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1777 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1778 Add tx49 insns and configury.
1781 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1783 * mips-opc.c (ffc, ffs): Fix mask.
1785 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1787 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1790 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1792 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1793 start-sanitize-cygnus
1794 Added VR5400 instructions.
1795 (N5): New cpu-id macro.
1797 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1799 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1801 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1802 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1804 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1806 * v850-dis.c (disassemble): Replace // with /* ... */
1808 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1810 * sparc-opc.c: Add wr & rd for v9a asr's.
1811 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1812 (v9a_asr_reg_names): New variable.
1813 Patch from David Miller <davem@vger.rutgers.edu>.
1815 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1817 * sparc-opc.c (v9notv9a): New insn type.
1818 (IMPDEP): Move to the end to not conflict with edge8 et al.
1819 Patch from David Miller <davem@vger.rutgers.edu>.
1821 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1823 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1825 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1827 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1829 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1831 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1832 of disassemble_info structure to determine if an overlay address
1833 has a matching symbol in low memory.
1835 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1836 new symbol_at_address_func field in disassemble_info structure.
1838 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1840 * v850-opc.c (extract_d22): Use signed arithmatic.
1842 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1844 * mips-opc.c: Three op mult is not an ISA insn.
1846 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1848 * mips-opc.c: Fix formatting.
1850 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1852 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1853 than assuming that char is signed. Explicitly sign extend 16 bit
1854 values, rather than assuming that short is 16 bits.
1855 (OP_sI, OP_J, OP_DIR): Likewise.
1857 start-sanitize-v850e
1858 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1860 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1864 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1866 * v850-opc.c: Fix typo in comment.
1868 * v850-dis.c (disassemble): Add test of processor type when
1869 determining opcodes.
1871 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1873 * configure.in: Use a diversion to set enable_shared before the
1874 arguments are parsed.
1875 * configure: Rebuild.
1877 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1879 * m68k-opc.c (TBL1): Use ! rather than `.
1880 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1882 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1884 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1886 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1888 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1891 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1892 * aclocal.m4: Rebuild with new libtool.
1893 * configure: Rebuild.
1895 start-sanitize-v850e
1896 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1898 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1901 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1903 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1905 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1907 * v850-opc.c (v850_opcodes): Further rearrangements.
1909 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1911 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1913 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1915 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1918 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1920 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1922 * mips16-opc.c: Added mips16 sdbbp.
1925 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1927 * v850-opc.c: Initialise processors field of v850_opcode structure.
1929 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1931 Merge changes from Martin Hunt:
1933 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1935 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1936 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1937 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1939 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1941 * d30v-dis.c (print_insn): First operand of d*i (delayed
1942 branch) instructions is relative.
1944 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1945 (d30v_operand_table): Add IMM6S3 type.
1946 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1948 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1949 and cmp instructions.
1951 * d30v-opc.c: Correct entries for repeat*, and sat*.
1952 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1953 types. Correct several formats.
1955 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1957 * d30v-opc.c (pre_defined_registers): Change control registers.
1959 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1960 SHORT_C2. Manual was incorrect.
1962 * d30v-dis.c (lookup_opcode): Return value now indicates
1963 if an opcode has a short and a long form. Used for deciding
1964 to append a ".s" or ".l".
1965 (print_insn): Append a ".s" to an instruction if it is
1966 the short form and ".l" if it is a long form. Do not append
1967 anything if the instruction has only one possible size.
1969 * d30v-opc.c: Change mulx2h to require an even register.
1970 New form: SHORT_A2; a SHORT_A form that needs an even
1971 register as the first operand.
1973 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1974 instruction was not being disassembled if there were an odd
1975 number of instructions.
1977 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1979 start-sanitize-v850e
1980 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1982 * v850-dis.c (disassemble): Improved display of register lists.
1985 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1987 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1988 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1989 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1990 fandnot1s, fandnot2s.
1992 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1994 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1996 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1998 * cgen-asm.c (cgen_parse_address): New argument resultp.
1999 All callers updated.
2000 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2002 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2004 * mn10200-dis.c (disassemble): PC relative instructions are
2005 relative to the next instruction, not the current instruction.
2007 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2009 * v850-dis.c (disassemble): Only signed extend values that are not
2010 returned by extract functions.
2011 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2013 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2015 * v850-opc.c: Update comments. Remove use of
2016 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2018 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2020 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2022 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2024 * configure: Rebuilt with latest devo autoconf for NT support.
2026 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2028 * v850-dis.c (disassemble): Use curly brace syntax for register
2031 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2032 where r0 is being used as a destination register.
2034 start-sanitize-v850e
2035 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2037 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2040 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2042 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2043 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2044 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2045 Add insns to access SGR and DBR.
2046 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2048 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2050 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2052 start-sanitize-v850e
2053 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2055 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2056 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2059 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2061 * configure (cgen_files): Add support for v850e target.
2062 * configure.in (cgen_files): Add support for v850e target.
2064 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2066 * configure (cgen_files): Add support for v850ea target.
2067 * configure.in (cgen_files): Add support for v850ea target.
2070 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2072 * configure.in (bfd_arc_arch): Add.
2073 * configure: Rebuild.
2074 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2075 * Makefile.in: Rebuild.
2076 * arc-dis.c, arc-opc.c: New files.
2077 * disassemble.c (ARCH_all): Define ARCH_arc.
2078 (disassembler): Add ARC support.
2080 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2082 start-sanitize-v850e
2083 * v850-dis.c (disassemble): Add support for v850EA instructions.
2085 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2086 (v850_opcodes): Add v850EA instructions.
2088 * v850-dis.c (disassemble): Add support for v850E instructions.
2090 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2091 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2092 insert_spe, extract_spe): New Functions.
2093 (v850_opcodes): Add v850E instructions.
2096 * v850-opc.c: Reorganised and re-layed out to improve readability
2099 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2101 * configure: Rebuild with autoconf 2.12.1.
2103 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2105 * aclocal.m4, configure: Rebuild with new automake patches.
2107 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2109 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2110 * acinclude.m4: Just include acinclude.m4 from BFD.
2111 * aclocal.m4, configure: Rebuild.
2113 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2115 * Makefile.am: New file, based on old Makefile.in.
2116 * acconfig.h: New file.
2117 * acinclude.m4: New file.
2118 * stamp-h.in: New file.
2119 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2120 Removed shared library handling; now handled by libtool. Replace
2121 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2122 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2123 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2124 handling in AC_OUTPUT.
2125 * dep-in.sed: Change .o to .lo.
2126 * Makefile.in: Now built with automake.
2127 * aclocal.m4: Now built with aclocal.
2128 * config.in, configure: Rebuild.
2130 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2132 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2134 start-sanitize-r5900
2135 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2137 * mips-opc.c: Fix coding of mtsa.
2140 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2142 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2144 * sparc-dis.c (sorted_opcodes): New static local.
2145 (struct opcode_hash): `opcode' is pointer to const element.
2146 (build_hash): First arg is now table of sorted pointers.
2147 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2148 (compare_opcodes): Update.
2150 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2152 * cgen-opc.c: #include <ctype.h>.
2153 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2154 Handle case insensitive hashing.
2155 (hash_keyword_value): Change type of `value' to unsigned int.
2157 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2159 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2160 precision FP, mark it as such. Likewise for double precision
2161 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2163 start-sanitize-r5900
2164 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2167 start-sanitize-r5900
2168 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2170 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2171 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2174 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2176 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2178 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2179 nesting depth when all the macros are expanded.
2181 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2183 * sparc-opc.c: The fcmp v9a instructions take an integer register
2184 as a destination, not a floating point register. From Christian
2185 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2187 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2189 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2190 syntax. From Roman Hodek
2191 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2193 * i386-dis.c (twobyte_has_modrm): Fix pand.
2195 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2197 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2199 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2201 * arm-dis.c: Add prototypes for arm_decode_shift and
2204 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2206 * mips-opc.c: Add r3900 insns.
2208 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2210 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2211 print delay slot instructions on the same line. When using a PC
2212 relative load, add a comment with the value being loaded if it can
2215 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2217 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2218 to pushS/popS for segment regs and byte constant so that
2219 pushw/popw printed when in 16 bit data mode.
2221 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2222 print cbtw, cwtd in 16 bit data mode.
2223 * i386-dis.c (putop): extra case W to support above.
2225 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2226 address size prefix in 16 bit address mode.
2228 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2230 * sh-dis.c: Reindent. Rename local variable fprintf to
2233 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2235 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2237 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2239 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2241 * mips16-opc.c (mip16_opcodes): same.
2243 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2245 * m68k-opc.c (moveb): Change $d to %d.
2247 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2249 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2250 (twobyte_has_modrm): Likewise.
2252 (OP_MMX, OP_EM, OP_MS): New static functions.
2254 * i386-dis.c: Revert patch of April 4. The output now matches
2257 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2259 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2262 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2264 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2266 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2268 * Makefile.in (install): Depend upon installdirs.
2269 (installdirs): New target.
2271 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2273 From Thomas Graichen <graichen@rzpd.de>:
2274 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2275 * configure: Rebuild.
2277 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2279 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2280 Delete string{,s}.h support.
2282 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2284 * cgen-asm.c (cgen_parse_operand_fn): New global.
2285 (cgen_parse_{{,un}signed_integer,address}): Update call to
2286 cgen_parse_operand_fn.
2287 (cgen_init_parse_operand): New function.
2288 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2289 from cgen_asm_init_parse.
2290 (m32r_cgen_assemble_insn): New operand `errmsg'.
2291 Delete call to as_bad, return error message to caller.
2292 (m32r_cgen_asm_hash_keywords): #if 0 out.
2294 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2296 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2298 [case 'J']: Fix typo in register name.
2300 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2302 * configure.in: Substitute SHLIB_LIBS.
2303 * configure: Rebuild.
2304 * Makefile.in (SHLIB_LIBS): New variable.
2305 ($(SHLIB)): Use $(SHLIB_LIBS).
2307 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2309 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2311 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2313 * disassemble.c (disassembler): Handle m32r.
2315 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2317 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2318 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2319 * Makefile.in (CFILES): Add them.
2320 (ALL_MACHINES): Add them.
2321 (dependencies): Regenerate.
2322 * configure.in (cgen_files): New variable.
2323 (bfd_m32r_arch): Add entry.
2324 * configure: Regenerate.
2326 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2328 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2329 * configure: Rebuild.
2331 * Makefile.in: Rebuild dependencies.
2333 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2335 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2338 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2340 * Branched binutils 2.8.
2342 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2344 * m10200-dis.c: Rename from mn10200-dis.c.
2345 * m10200-opc.c: Rename from mn10200-opc.c.
2346 * m10300-dis.c: Rename from mn10300-dis.c
2347 * m10300-opc.c: Rename from mn10300-opc.c.
2348 * Makefile.in: Update accordingly.
2350 * mips16-opc.c: Add mul and dmul macros.
2352 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2354 * makefile.vms: Update CFLAGS, add clean target.
2356 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2358 * mips-opc.c: Add "wait". From Ralf Baechle
2359 <ralf@gnu.ai.mit.edu>.
2361 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2362 * configure, config.in: Rebuild.
2363 * sysdep.h: Include <stdlib.h> if it exists.
2364 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2366 * Makefile.in: Rebuild dependencies.
2368 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2370 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2371 Andrew Bray <andy@madhouse.demon.co.uk>.
2373 * mips-opc.c: Add cast when setting mips_opcodes.
2375 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2377 * v850-dis.c (disassemble): Fix sign extension problem.
2378 * v850-opc.c (extract_d*): Fix sign extension problems to make
2379 disassembly calculate branch offsets correctly.
2381 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2383 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2385 * mips-opc.c: Add dctr and dctw.
2387 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2389 * d30v-dis.c (print_insn): Change the way signed constants
2392 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2394 * Makefile.in (BFD_H): New variable.
2395 (HFILES): New variable.
2396 (CFILES): Add all C files.
2397 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2398 Delete old dependencies, and build new ones.
2399 * dep-in.sed: New file.
2401 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2403 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2405 start-sanitize-coldfire
2406 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2408 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2411 end-sanitize-coldfire
2412 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2414 * mn10200-opc.c: Change "trap" to "syscall".
2415 * mn10300-opc.c: Add new "syscall" instruction.
2417 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2419 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2420 mulul insns on the coldfire.
2422 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2424 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2425 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2426 (print_insn_little_arm): Likewise.
2428 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2430 Based on patches from H.J. Lu <hjl@lucon.org>:
2431 * i386-dis.c (fetch_data): Add prototype.
2432 * m68k-dis.c (fetch_data): Add prototype.
2433 (dummy_print_address): Add prototype. Make static.
2434 * ppc-opc.c (valid_bo): Add prototype.
2435 * sparc-dis.c (build_hash_table): Add prototype.
2436 (is_delayed_branch, compute_arch_mask): Add prototypes.
2437 (print_insn_sparc): Make several local variables const.
2438 (compare_opcodes): Change arguments to const PTR. Add prototype.
2439 * sparc-opc.c (arg): Change name field to be const.
2440 (lookup_name, lookup_value): Add prototypes. Change table and
2441 name parameters to be const.
2442 (sparc_encode_asi): Change name parameter to be const.
2443 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2444 (sparc_encode_sparclet_cpreg): Likewise.
2445 (sparc_decode_asi): Change return type to be const.
2446 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2447 (sparc_decode_sparclet_cpreg): Likewise.
2449 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2451 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2452 Solaris doesn't like the combined options, and the -f is
2454 (stamp-tshlink, install): Likewise.
2456 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2458 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2461 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2463 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2465 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2467 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2470 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2472 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2474 start-sanitize-tic80
2475 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2477 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2479 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2481 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2484 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2486 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2487 floatformat_to_double to make portable.
2488 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2491 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2493 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2494 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2496 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2498 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2499 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2501 start-sanitize-tic80
2502 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2504 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2505 (OFF_SL_BR_SCALED): ... to this, and added the flag
2506 TIC80_OPERAND_BASEREL to the flags word.
2507 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2511 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2513 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2514 Change mips_opcodes from const array to a pointer,
2515 and change bfd_mips_num_opcodes from const int to int,
2516 so that we can increase the size of the mips opcodes table
2519 start-sanitize-tic80
2520 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2522 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2523 store BITNUM values in the table in one's complement form
2524 to match behavior when assembler is given a raw numeric
2525 value for a BITNUM operand.
2526 * tic80-dis.c (print_operand_bitnum): Ditto.
2529 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2531 * d30v-opc.c: Removed references to FLAG_X.
2533 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2535 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2537 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2539 * Makefile.in: Added d30v object files.
2540 * configure: (bfd_d30v_arch) Rebuilt.
2541 * configure.in: (bfd_d30v_arch) Added new case.
2542 * d30v-dis.c: New file.
2543 * d30v-opc.c: New file.
2544 * disassemble.c (disassembler) Add entry for d30v.
2546 start-sanitize-tic80
2547 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2549 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2550 representations for the floating point BITNUM values.
2552 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2554 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2555 in the table in one's complement form, as they appear in the
2557 (tic80_symbol_to_value): Use macros to access predefined
2559 (tic80_value_to_symbol): Ditto.
2560 (tic80_next_predefined_symbol): New function.
2561 * tic80-dis.c (print_operand_bitnum): Remove code that did
2562 one's complement for BITNUM values.
2565 start-sanitize-r5900
2566 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2568 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2571 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2573 * makefile.vms: Remove 8 bit characters. Update to latest
2576 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2578 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2580 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2582 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2583 (IMM24_PCREL): Likewise.
2585 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2587 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2588 address for an extended PC relative instruction that is not a
2591 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2593 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2596 start-sanitize-tic80
2597 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2599 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2600 (tic80_opcodes): Sort entries so that long immediate forms
2601 come after short immediate forms, making it easier for
2602 assembler to select the right one for a given operand.
2605 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2607 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2609 (print_insn_mips16): Likewise.
2611 start-sanitize-r5900
2612 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2614 * mips-opc.c: add r5900.
2617 start-sanitize-tic80
2618 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2620 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2621 a symbol class that restricts translation to just that
2622 class (general register, condition code, etc).
2624 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2626 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2627 and REG_DEST_E for register operands that have to be
2628 an even numbered register. Add REG_FPA for operands that
2629 are one of the floating point accumulator registers.
2630 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2631 (tic80_opcodes): Change entries that need even numbered
2632 register operands to use the new operand table entries.
2633 Add "or" entries that are identical to "or.tt" entries.
2636 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2638 * mips16-opc.c: Add new cases of exit instruction for
2640 * mips-dis.c (print_mips16_insn_arg): Display floating point
2641 registers in operands of exit instruction. Print `$' before
2642 register names in operands of entry and exit instructions.
2644 start-sanitize-tic80
2645 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2647 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2648 pairs for all predefined symbols recognized by the assembler.
2649 Also used by the disassembling routines.
2650 (tic80_symbol_to_value): New function.
2651 (tic80_value_to_symbol): New function.
2652 * tic80-dis.c (print_operand_control_register,
2653 print_operand_condition_code, print_operand_bitnum):
2654 Remove private tables and use tic80_value_to_symbol function.
2657 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2659 * d10v-dis.c (print_operand): Change address printing
2660 to correctly handle PC wrapping. Fixes PR11490.
2662 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2664 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2667 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2669 * mips-dis.c (print_insn_mips16): Set insn_info information.
2670 (print_mips16_insn_arg): Likewise.
2672 * mips-dis.c (print_insn_mips16): Better handling of an extend
2673 opcode followed by an instruction which can not be extended.
2675 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2677 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2678 coldfire moveb instruction to not allow an address register as
2679 destination. Although the documentation does not indicate that
2680 this is invalid, experiments uncovered unexpected behavior.
2681 Added a comment explaining the situation. Thanks to Andreas
2682 Schwab for pointing this out to me.
2684 start-sanitize-tic80
2685 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2687 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2688 entries are presorted so that entries with the same mnemonic are
2689 adjacent to each other in the table. Sort the entries for each
2690 instruction so that this is true.
2693 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2695 * m68k-dis.c: Include <libiberty.h>.
2696 (print_insn_m68k): Sort the opcode table on the most significant
2697 nibble of the opcode.
2699 start-sanitize-tic80
2700 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2702 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2703 "vsub", "vst", "xnor", and "xor" instructions.
2704 (V_a1): Renamed from V_a, msb of accumulator reg number.
2705 (V_a0): Add macro, lsb of accumulator reg number.
2707 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2709 * tic80-dis.c (print_insn_tic80): Broke excessively long
2710 function up into several smaller ones and arranged for
2711 the instruction printing function to be callable recursively
2712 to print vector instructions that have both a load and a
2713 math instruction packed into a single opcode.
2714 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2715 to explain why it comes after the other vector opcodes.
2718 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2720 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2721 move insns to handle immediate operands.
2723 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2725 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2726 fix operand mask in the "moveml" entries for the coldfire.
2728 start-sanitize-tic80
2729 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2731 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2732 New macros for building vector instruction opcodes.
2733 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2734 FMT_LI, which were unused. The field is now a flags field.
2735 Remove some opcodes that are possible, but illegal, such
2736 as long immediate instructions with doubles for immediate
2737 values. Add "vadd" and "vld" instructions.
2739 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2741 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2742 the order more logical. Move the shift alias instructions ("rotl",
2743 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2744 interspersed with the regular sr.x and sl.x instructions. Add
2745 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2746 "sub", "subu", "swcr", and "trap".
2748 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2750 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2751 (OFF_SL_PC): Renamed from OFF_SL.
2752 (OFF_SS_BR): New operand type for base relative operand.
2753 (OFF_SL_BR): New operand type for base relative operand.
2754 (REG_BASE): New operand type for base register operand.
2755 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2756 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2757 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2759 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2760 10 char field, padded with spaces on rhs, rather than a string
2761 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2762 than old TIC80_OPERAND_RELATIVE. Add support for new
2763 TIC80_OPERAND_BASEREL flag bit.
2765 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2767 * tic80-dis.c (print_insn_tic80): Print floating point operands
2769 * tic80-opc.c (SPFI): Add single precision floating point
2770 immediate operand type.
2771 (ROTATE): Add rotate operand type for shifts.
2772 (ENDMASK): Add for shifts.
2773 (n): Macro for the 'n' bit.
2774 (i): Macro for the 'i' bit.
2775 (PD): Macro for the 'PD' field.
2776 (P2): Macro for the 'P2' field.
2777 (P1): Macro for the 'P1' field.
2778 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2782 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2784 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2785 adding in current address for pc-relative operands.
2787 start-sanitize-tic80
2788 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2790 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2791 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2792 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2793 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2794 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2795 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2796 (REG_SCALED, LSI_SCALED): New operand types.
2797 (E): New macro for 'E' bit at bit 27.
2798 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2799 opcodes, including the various size flavors (b,h,w,d) for
2800 the direct load and store instructions.
2802 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2804 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2806 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2807 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2808 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2809 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2810 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2811 masks with "MASK_* & ~M_*" to get the M bit reset.
2812 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2814 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2816 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2817 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2818 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2820 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2821 CC, SICR, and LICR table entries.
2822 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2823 "bcnd", and "brcr" opcodes.
2826 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2828 * ppc-opc.c (powerpc_operands): Make comment match the
2829 actual fields (no shift field).
2830 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2831 start-sanitize-tic80
2832 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2833 partial implementation, work in progress.
2834 * tic80-opc.c (tic80_operands): Begin construction operands table.
2835 (tic80_opcodes): Continue populating opcodes table and start
2836 filling in the operand indices.
2837 (tic80_num_opcodes): Add this.
2840 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2842 * m68k-opc.c: Add #B case for moveq.
2844 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2846 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2847 before they are used.
2849 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2851 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2852 for "breakpoint" instruction.
2854 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2856 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2857 (dep): Use ALL_CFLAGS rather than CFLAGS.
2859 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2861 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2864 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2866 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2867 start-sanitize-tic80
2868 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2871 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2873 * mips16-opc.c: Add "abs".
2875 start-sanitize-tic80
2876 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2878 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2879 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2880 (disassembler): Add bfd_arch_tic80 support to set disassemble
2881 to print_insn_tic80.
2882 * tic80-dis.c (print_insn_tic80): Add stub.
2884 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2886 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2887 * configure: Regenerate with autoconf.
2888 * tic80-dis.c: Add file.
2889 * tic80-opc.c: Add file.
2892 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2894 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2896 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2898 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2899 (mn10200_opcodes): Use it for some logicals and btst insns.
2900 Add "break" and "trap" instructions.
2902 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2904 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2906 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2908 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2909 relative load or add now depends upon whether the instruction is
2912 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2914 * mn10200-dis.c: Finish writing disassembler.
2915 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2916 Fix mask for "jmp (an)".
2918 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2919 handle endianness issues for mn10300.
2921 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2923 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2925 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2926 instruction. Fix opcode field for "movb (imm24),dn".
2928 * mn10200-opc.c (mn10200_operands): Fix insertion position
2931 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2933 * mn10200-opc.c: Create mn10200 opcode table.
2934 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2935 but moving along nicely.
2937 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2939 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2941 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2943 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2944 specifiers for fmovem* instructions.
2946 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2948 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2950 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2952 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2955 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2957 * mn10300-opc.c: Add some comments explaining the various
2960 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2962 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2964 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2967 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2968 operand specifiers in fmovm* instructions.
2970 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2972 * ppc-opc.c (insert_li): Give an error if the offset has the two
2973 least significant bits set.
2975 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2977 * mips-dis.c (print_insn_mips16): Separate the instruction from
2978 the arguments with a tab, not a space.
2980 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2982 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2985 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2988 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2990 * configure: Rebuild with autoconf 2.12.
2992 Add support for mips16 (16 bit MIPS implementation):
2993 * mips16-opc.c: New file.
2994 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2995 (mips16_reg_names): New static array.
2996 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2997 after seeing a 16 bit symbol.
2998 (print_insn_little_mips): Likewise.
2999 (print_insn_mips16): New static function.
3000 (print_mips16_insn_arg): New static function.
3001 * mips-opc.c: Add jalx instruction.
3002 * Makefile.in (mips16-opc.o): New target.
3003 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3004 * configure: Rebuild.
3006 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3008 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3009 operand specifiers in *save, *restore and movem* instructions.
3011 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3014 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3015 register operands for immediate arithmetic, not, neg, negx, and
3016 set according to condition instructions.
3018 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3019 specifier of the effective-address operand in immediate forms of
3020 arithmetic instructions. The specifier for the immediate operand
3021 notes how and where the constant will be stored.
3023 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3025 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3028 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3031 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3033 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3035 * mn10300-dis.c (disassemble): Handle register lists.
3037 * mn10300-opc.c: Fix handling of register list operand for
3038 "call", "ret", and "rets" instructions.
3040 * mn10300-dis.c (disassemble): Print PC-relative and memory
3041 addresses symbolically if possible.
3042 * mn10300-opc.c: Distinguish between absolute memory addresses,
3043 pc-relative offsets & random immediates.
3045 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3047 (disassemble): Handle SPLIT and EXTENDED operands.
3049 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3051 * mn10300-dis.c: Rough cut at printing some operands.
3053 * mn10300-dis.c: Start working on disassembler support.
3054 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3056 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3058 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3060 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3062 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3064 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3066 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3067 register argument is calls and jmp instructions.
3069 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3071 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3072 getx operand. Fix opcode for mulqu imm,dn.
3074 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3076 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3077 in MN10300_OPERAND_SPLIT operands for how many bits
3078 appear in the basic insn word. Add IMM32_HIGH24,
3079 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3080 (mn10300_opcodes): Use new operands as needed.
3082 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3083 for bset, bclr, btst instructions.
3084 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3086 * mn10300-opc.c (mn10300_operands): Remove many redundant
3087 operands. Update opcode table as appropriate.
3088 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3089 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3091 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3093 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3094 operands (for indexed load/stores). Fix bitpos for DI
3095 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3096 few instructions that insert immediates/displacements in the
3097 middle of the instruction. Add IMM8E for 8 bit immediate in
3098 the extended part of an instruction.
3099 (mn10300_operands): Use new opcodes as appropriate.
3101 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3103 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3104 sequential so the assembler never parallelizes it with
3107 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3109 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3110 a data/address register that appears in register field 0
3111 and register field 1.
3112 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3114 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3116 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3117 standard disassembly.
3119 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3120 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3121 Recategorize PALcode instructions.
3123 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3125 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3127 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3129 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3130 there are no operand types.
3132 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3134 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3136 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3138 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3140 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3142 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3144 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3145 and sst.w instructions.
3147 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3150 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3152 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3155 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3157 * ppc-opc.c (PPCPWR2): Define.
3158 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3161 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3163 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3164 field for movhu instruction.
3166 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3167 cast value to "long" not "signed long" to keep hpux10
3170 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3172 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3175 * mn10300-opc.c (FMT*): Remove definitions.
3177 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3178 for shift-by-register opcodes.
3180 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3181 into [AD][MN][01] for encoding the position of the register
3184 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3186 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3187 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3189 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3191 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3192 Fix various typos. Add "PAREN" operand.
3193 (MEM, MEM2): Define.
3194 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3195 operands. Fix several typos.
3197 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3200 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3202 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3203 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3205 (mn10300_opcodes): Break opcode format out into its own field.
3206 Update many operand fields to deal with signed vs unsigned
3207 issues. Fix one or two typos in the "mov" instruction
3208 opcode, mask and/or operand fields.
3210 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3212 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3213 m68851 wasn't reset.
3215 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3217 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3218 all opcodes. Very rough cut at operands for all opcodes.
3220 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3223 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3225 * mn10200-opc.c, mn10300-opc.c: New files.
3226 * mn10200-dis.c, mn10300-dis.c: New files.
3227 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3228 * disassemble.c: Break mn10x00 support into 10200 and 10300
3230 * configure.in: Likewise.
3231 * configure: Rebuilt.
3233 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3235 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3237 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3239 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3241 * disassemble (ARCH_mn10x00): Define.
3242 (disassembler): Handle bfd_arch_mn10x00.
3243 * configure.in: Recognize bfd_mn10x00_arch.
3244 * configure: Rebuilt.
3246 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3248 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3249 accordingly. Don't declare functions using op_rtn.
3251 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3253 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3254 params to be more standard.
3255 * (disassemble): Print absolute addresses and symbolic names for
3256 branch and jump targets.
3257 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3259 * (v850_opcodes): Add breakpoint insn.
3261 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3263 * m68k-opc.c: Move the fmovemx data register cases before the
3264 other cases, so that they get recognized before the data register
3265 does gets treated as a degenerate register list.
3267 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3269 * mips-opc.c: Add a case for "div" and "divu" with two registers
3270 and a destination of $0.
3272 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3274 * mips-dis.c (print_insn_arg): Add prototype.
3275 (_print_insn_mips): Ditto.
3277 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3279 * mips-dis.c (print_insn_arg): Print condition code registers as
3282 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3284 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3286 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3288 * v850-dis.c (disassemble): Make static. Provide prototype.
3290 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3292 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3295 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3297 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3298 ']' characters into the output stream.
3299 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3300 Add "memop" field to all opcodes (for the disassembler).
3301 Reorder opcodes so that "nop" comes before "mov" and "jr"
3302 comes before "jarl".
3304 * v850-dis.c (print_insn_v850): Fix typo in last change.
3306 * v850-dis.c (print_insn_v850): Properly handle disassembling
3307 a two byte insn at the end of a memory region when the memory
3308 region's size is only two byte aligned.
3310 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3312 * v850-dis.c (v850_reg_names): Define.
3313 (v850_sreg_names, v850_cc_names): Likewise.
3314 (disassemble): Very rough cut at printing operands (unformatted).
3316 * v850-opc.c (BOP_MASK): Fix.
3317 (v850_opcodes): Fix mask for jarl and jr.
3319 * v850-dis.c: New file. Skeleton for disassembler support.
3320 * Makefile.in Remove v850 references, they're not needed here.
3321 * configure.in: Add v850-dis.o when building v850 toolchains.
3322 * configure: Rebuilt.
3323 * disassemble.c (disassembler): Call v850 disassembler.
3325 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3326 (insert_d8_6, extract_d8_6): New functions.
3327 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3328 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3330 (IF4A, IF4B): Use "D7" instead of "D7S".
3331 (IF4C, IF4D): Use "D8_7" instead of "D8".
3332 (IF4E, IF4F): New. Use "D8_6".
3333 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3334 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3336 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3337 (v850_operands): Change D16 to D16_15, use special insert/extract
3338 routines. New new D16 that uses the generic insert/extract code.
3339 (IF7A, IF7B): Use D16_15.
3340 (IF7C, IF7D): New. Use D16.
3341 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3343 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3344 message. Issue an error if the branch offset is odd.
3346 * v850-opc.c: Add notes about needing special insert/extract
3347 for all the load/store insns, except "ld.b" and "st.b".
3349 * v850-opc.c (insert_d22, extract_d22): New functions.
3350 (v850_operands): Use insert_d22 and extract_d22 for
3352 (insert_d9): Fix range check.
3354 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3356 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3357 and set bits field to D9 and D22 operands.
3359 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3361 * v850-opc.c (v850_operands): Define SR2 operand.
3362 (v850_opcodes): "ldsr" uses R1,SR2.
3364 * v850-opc.c (v850_opcodes): Fix opcode specs for
3365 sld.w, sst.b, sst.h, sst.w, and nop.
3367 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3369 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3370 end of the opcode table.
3372 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3374 * d10v-opc.c (pre_defined_registers): Added register pairs,
3375 "r0-r1", "r2-r3", etc.
3377 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3379 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3380 Create I16U for an unsigned 16bit mmediate operand.
3381 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3383 * v850-opc.c (v850_operands): Define EP operand.
3384 (IF4A, IF4B, IF4C, IF4D): Use EP.
3386 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3387 with immediate operand, "movhi". Tweak "ldsr".
3389 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3390 correct. Get sld.[bhw] and sst.[bhw] closer.
3392 * v850-opc.c (v850_operands): "not" is a two byte insn
3394 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3396 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3398 * v850-opc.c (two): Get order of words correct.
3400 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3402 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3403 register source and destination operands.
3404 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3406 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3407 same thinko in "trap" opcode.
3409 * v850-opc.c (v850_opcodes): Add initializer for size field
3412 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3413 Add D8 for 8-bit unsigned field in short load/store insns.
3414 (IF4A, IF4D): These both need two registers.
3415 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3416 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3417 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3418 for "ldsr" and "stsr".
3419 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3422 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3423 short store word (sst.w).
3425 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3427 * v850-opc.c (v850_operands): Added insert and extract fields,
3428 pointers to functions that handle unusual operand encodings.
3430 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3432 * v850-opc.c (v850_opcodes): Enable "trap".
3434 * v850-opc.c (v850_opcodes): Fix order of displacement
3435 and register for "set1", "clr1", "not1", and "tst1".
3437 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3439 * v850-opc.c (v850_operands): Add "B3" support.
3440 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3443 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3445 * v850-opc.c: Close unterminated comment.
3447 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3449 * v850-opc.c (v850_operands): Add flags field.
3450 (v850_opcodes): add move opcodes.
3452 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3454 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3455 * configure: (bfd_v850v_arch) Add new case.
3456 * configure.in: (bfd_v850_arch) Add new case.
3457 * v850-opc.c: New file.
3459 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3461 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3463 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3465 * d10v-opc.c: Add additional information to the opcode
3466 table to help determinine which instructions can be done
3469 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3471 * mpw-make.sed: Update editing of include pathnames to be
3474 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3476 * arm-opc.h: Added "bx" instruction definition.
3478 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3480 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3482 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3484 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3486 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3488 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3490 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3492 * makefile.vms: Update for alpha-opc changes.
3494 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3496 * i386-dis.c (print_insn_i386): Actually return the correct value.
3497 (ONE, OP_ONE): #ifdef out; not used.
3499 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3501 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3502 Changed subi operand type to treat 0 as 16.
3504 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3506 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3509 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3511 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3512 memory transfer instructions. Add new format string entries %h and %s.
3513 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3516 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3518 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3519 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3521 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3523 * alpha-dis.c (print_insn_alpha_osf): Remove.
3524 (print_insn_alpha_vms): Remove.
3525 (print_insn_alpha): Make globally visible. Chose the register
3526 names based on info->flavour.
3527 * disassemble.c: Always return print_insn_alpha for the alpha.
3529 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3531 * d10v-dis.c (dis_long): Handle unknown opcodes.
3533 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3535 * d10v-opc.c: Changes to support signed and unsigned numbers.
3536 All instructions with the same name that have long and short forms
3537 now end in ".l" or ".s". Divs added.
3538 * d10v-dis.c: Changes to support signed and unsigned numbers.
3540 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3542 * d10v-dis.c: Change all functions to use info->print_address_func.
3544 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3546 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3547 move ccr/sr insns more strict so that the disassembler only
3548 selects them when the addressing mode is data register.
3550 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3551 * d10v-opc.c (pre_defined_registers): Declare.
3552 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3553 to pick a better name for the registers.
3555 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3557 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3558 operands for fexpand and fpmerge. From Christian Kuehnke
3559 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3561 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3563 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3564 print routine. Take new regnames and cpumask arguments.
3565 Kill the environment variable nonsense.
3566 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3567 (print_insn_alpha_vms): New function. Do VMS style regnames.
3568 * disassemble.c (disassembler): Test bfd flavour to pick
3569 between OSF and VMS routines. Default to OSF.
3571 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3573 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3574 * configure: Rebuild.
3575 * Makefile.in (install): Use @INSTALL_SHLIB@.
3577 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3579 * configure: (bfd_d10v_arch) Add new case.
3580 * configure.in: (bfd_d10v_arch) Add new case.
3581 * d10v-dis.c: New file.
3582 * d10v-opc.c: New file.
3583 * disassemble.c (disassembler) Add entry for d10v.
3585 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3587 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3588 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3590 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3592 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3593 distinguish between variants of the instruction set.
3594 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3595 distinguish between variants of the instruction set.
3597 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3599 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3600 the 8086 instruction set.
3601 * i386-dis.c: General cleanups. Make most things static. Add
3602 prototypes. Get rid of static variables aflags and dflags. Pass
3603 them as args (to almost everything).
3605 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3607 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3609 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3611 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3612 if the next arg is marked with SRC_IN_DST. Gross.
3614 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3615 we're looking for and find EXR.
3617 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3618 if we're looking for KBIT and we don't find it.
3620 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3623 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3624 3bit immediate operands.
3626 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3628 * Released binutils 2.7.
3630 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3631 <kkaempf@progis.ac-net.de>.
3633 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3635 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3637 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3639 * sparc-dis.c (print_insn_sparclite): New routine to print
3640 sparclite instructions.
3642 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3644 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3646 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3648 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3649 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3650 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3652 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3654 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3655 Use autoconf-set values.
3656 (docdir, oldincludedir): Removed.
3657 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3659 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3661 * alpha-opc.c: New file.
3662 * alpha-opc.h: Remove.
3663 * alpha-dis.c: Complete rewrite to use new opcode table.
3664 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3665 * configure: Rebuild with autoconf 2.10.
3666 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3667 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3669 (alpha-opc.o): New target.
3671 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3673 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3674 Set imm_added_to_rs1 even if the source and destination register
3677 * sparc-opc.c: Add some two operand forms of the wr instruction.
3679 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3681 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3684 * disassemble.c (disassembler): Handle H8/S.
3685 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3687 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3689 * sparc-opc.c: Add beq/teq as aliases for be/te.
3691 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3692 <sergei@msil.sps.mot.com>.
3694 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3696 * makefile.vms: New file.
3698 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3700 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3702 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3705 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3707 * i386-dis.c (OP_OFF): Call append_prefix.
3709 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3711 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3712 unsigned long to silence a warning from the Solaris PowerPC
3715 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3717 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3719 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3721 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3723 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3724 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3725 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3726 cpush, cpusha, cpull sparclet insns.
3728 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3730 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3732 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3734 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3735 Set F_FLOAT on other floating point instructions.
3737 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3739 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3741 (powerpc_opcodes): Add 860/821 specific SPRs.
3743 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3745 * configure.in: Permit --enable-shared to specify a list of
3746 directories. Set and substitute BFD_PICLIST.
3747 * configure: Rebuild.
3748 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3749 uses. Set to @BFD_PICLIST@.
3751 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3753 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3754 not "abs", which may be needed for the absolute in something
3755 like btst #0,@10:8. Print L_3 immediates separately from other
3756 immediates. Change ABSMOV reference to ABS8MEM.
3758 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3760 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3761 (current_arch_mask): New static global.
3762 (compute_arch_mask): New static function.
3763 (print_insn_sparc): Delete sparc_v9_p. New static local
3764 current_mach. Resort opcode table if current_mach changes.
3765 Generalize "insn not supported" test.
3766 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3767 Delete test for v9/!v9.
3768 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3770 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3771 (brfcx): Renamed to FBRX.
3772 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3773 coprocessor mnemonics are not supported on the sparclet).
3774 (condf): Renamed to CONDF.
3775 (SLCBCC2): Delete F_ALIAS flag.
3777 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3779 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3780 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3782 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3784 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3785 that the shared library version number is set correctly.
3787 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3789 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3790 Miles Bader <miles@gnu.ai.mit.edu>.
3791 * configure: Rebuild.
3793 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3795 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3798 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3800 * configure: Rebuild with autoconf 2.8.
3802 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3804 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3805 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3807 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3809 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3810 since they appear as targets in Makefile.in.
3811 * configure: Rebuild.
3813 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3815 * mpw-make.sed: Edit out shared library support bits.
3817 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3819 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3820 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3821 (sparc_opcodes): Add sparclet insns.
3822 (sparclet_cpreg_table): New static local.
3823 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3824 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3826 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3828 * i386-dis.c (index16): New static variable.
3829 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3831 (OP_indirE): Return result of OP_E.
3832 (OP_E): Check for 16 bit addressing mode, and disassemble
3833 correctly. Optimised 32 bit case a little. Don't print
3834 "(base,index,scale)" when sib specifies only an offset.
3836 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3838 * configure.in: Set and substitute SHLIB_DEP.
3839 * configure: Rebuild.
3840 * Makefile.in (SHLIB_DEP): New variable.
3841 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3842 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3843 COMMON_SHLIB, add them to piclist with appropriate modifications.
3844 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3845 here: just use piclist.
3847 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3849 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3850 (print_insn_sparc): Rewrite v9/not-v9 tests.
3851 (compare_opcodes): Likewise.
3852 * sparc-opc.c (MASK_<ARCH>): Define.
3853 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3854 (sparclet,v6notv9): Define.
3855 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3856 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3858 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3860 * configure.in: Call AC_PROG_CC before configure.host.
3861 * configure: Rebuild.
3863 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3865 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3867 * i386-dis.c (onebyte_has_modrm): New static array.
3868 (twobyte_has_modrm): New static array.
3869 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3871 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3873 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3876 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3878 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3881 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3883 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3884 m68010up, not just m68020up | cpu32.
3886 * Makefile.in (SONAME): New variable.
3887 ($(SHLINK)): Make a link to the transformed name, as well.
3888 (stamp-tshlink): New target.
3889 (install): Skip stamp-tshlink during install.
3891 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3893 * configure.in: Call AC_ARG_PROGRAM.
3894 * configure: Rebuild.
3895 * Makefile.in (program_transform_name): New variable.
3896 (install): Transform library name before installing it.
3898 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3900 * i960-dis.c (mem): Add HX dcinva instruction.
3902 Support for building as a shared library, based on patches from
3903 Alan Modra <alan@spri.levels.unisa.edu.au>:
3904 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3905 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3906 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3907 * configure: Rebuild.
3908 * Makefile.in (ALLLIBS): New variable.
3909 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3910 (COMMON_SHLIB, SHLINK): New variables.
3911 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3912 (STAGESTUFF): Remove variable.
3913 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3914 (stamp-piclist, piclist): New targets.
3915 ($(SHLIB), $(SHLINK)): New targets.
3916 ($(OFILES)): Depend upon stamp-picdir.
3917 (disassemble.o): Build twice if PICFLAG is set.
3918 (MOSTLYCLEAN): Add pic/*.o.
3919 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3920 (distclean): Remove pic and stamp-picdir.
3921 (install): Install shared libraries.
3922 (stamp-picdir): New target.
3924 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3926 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3927 Print unknown instruction as "unknown", rather than in hex.
3929 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3931 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3933 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3935 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3937 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3939 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3940 when necessary. From Ulrich Drepper
3941 <drepper@myware.rz.uni-karlsruhe.de>.
3943 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3945 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3946 sparc_num_opcodes. Update architecture enum values.
3947 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3948 (sparc_opcode_lookup_arch): New function.
3949 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3950 (sparc_opcodes): Add v9a shutdown insn.
3952 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3954 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3955 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3957 (print_insn_sparc64): Deleted.
3958 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3961 * sparc-opc.c (architecture_pname): Add v9a.
3963 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3965 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3966 incorrectly defined as 0x16 when it should be 0x15.
3967 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3968 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3969 excb (exception barrier) which is defined in the Alpha
3970 Architecture Handbook version 2.
3971 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3972 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3973 disassembled as or, for example.
3975 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3977 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3978 (_print_insn_mips): Change i from int to unsigned int.
3980 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3982 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3983 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3985 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3987 * i386-dis.c: Added Pentium Pro instructions.
3989 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3991 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3994 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3996 * sh-opc.h (sh_nibble_type): Added REG_B.
3997 (sh_arg_type): Added A_REG_B.
3998 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4000 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4002 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4004 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4006 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4008 * Makefile.in (distclean): Remove stamp-h. From Ronald
4009 F. Guilmette <rfg@monkeys.com>.
4011 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4013 From David Mosberger-Tang <davidm@azstarnet.com>:
4014 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4017 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4019 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4020 (sh_table): Added many SH3 opcodes.
4021 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4023 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4025 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4026 (subco,subco.): Mark this PPC, not PPCCOM.
4028 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4030 * configure: Rebuild with autoconf 2.7.
4032 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4034 * configure: Rebuild with autoconf 2.6.
4036 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4038 * configure.in: Sort list of architectures. Accept but do nothing
4039 for alliant, convex, pyramid, romp, and tahoe.
4041 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4043 * a29k-dis.c (print_special): Change num to unsigned int.
4045 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4047 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4050 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4052 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4053 * configure: Rebuilt.
4055 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4057 * configure.in: Add case for bfd_i860_arch.
4058 * configure: Rebuild.
4060 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4062 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4063 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4064 (NEXTDOUBLE): Likewise.
4065 (print_insn_m68k): Don't match fmoveml if there is more than one
4066 register in the list.
4067 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4069 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4071 * m68k-opc.c: Use #W rather than #w.
4072 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4074 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4076 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4077 and likewise for all the dbxx opcodes.
4079 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4081 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4083 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4085 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4086 the VR4100 specific instructions to the mips_opcodes structure.
4088 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4090 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4091 ugly Metrowerks bug in CW6, is fixed in CW7.
4093 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4095 * ppc-opc.c (whole file): Add flags for common/any support.
4097 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4099 * Makefile.in (BISON): Remove macro.
4100 (FLAGS_TO_PASS): Remove BISON.
4102 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4104 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4106 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4107 instructions that take no args by looking at the match mask.
4108 (print_insn_arg): Always print "%" before register names.
4109 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4110 [case '_']: Don't print "@#" before address.
4111 [case 'J']: Use "%s" as format string, not register name.
4112 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4114 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4116 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4119 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4121 From David Mosberger-Tang <davidm@azstarnet.com>
4123 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4124 (alpha_insn_set): added definitions for VAX floating point
4125 instructions (Unix compilers don't generate these, but handcoded
4126 assembly might still use them).
4128 * alpha-dis.c (print_insn_alpha): added support for disassembling
4129 the miscellaneous instructions in the Alpha instruction set.
4131 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4133 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4134 no longer create sysdep.h, sed ppc-opc.c to work around a
4135 serious Metrowerks C bug.
4136 * mpw-make.in: Remove.
4137 * mpw-make.sed: New file, used by mpw-configure to edit
4138 Makefile.in into an MPW makefile.
4140 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4142 * Makefile.in (maintainer-clean): New synonym for realclean.
4144 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4146 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4147 which use '0', '1', and '2' instead. Specify the proper size for
4148 a pmove immediate operand. Correct the pmovefd patterns to be
4149 moves to a register, not from a register.
4150 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4152 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4154 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4155 %psr, %wim, %tbr as F_NOTV9.
4157 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4159 * Makefile.in (Makefile): Just rebuild Makefile when running
4161 (config.h, stamp-h): New targets.
4162 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4163 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4164 rebuilding config.h.
4165 * configure: Rebuild.
4167 * mips-opc.c: Change unaligned loads and stores with "t,A"
4168 operands to use "t,A(b)".
4170 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4172 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4174 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4176 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4177 until 3 instead of until 2.
4179 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4181 * Makefile.in (ALL_CFLAGS): Define.
4182 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4183 (MOSTLYCLEAN): Add config.log.
4184 (distclean): Don't remove config.log.
4185 * configure.in: Substitute HDEFINES.
4186 * configure: Rebuild.
4188 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4190 * sh-opc.h (sh_arg_type): Add F_FR0.
4191 (sh_table, case fmac): Add F_FR0 as first argument.
4193 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4195 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4197 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4199 * sparc-dis.c: Remove all references to NO_V9.
4201 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4203 * aclocal.m4: Just include ../bfd/aclocal.m4.
4204 * configure: Rebuild.
4206 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4208 * sparc-dis.c (X_DISP19): Define.
4209 (print_insn, case 'G'): Use it.
4210 (print_insn, case 'L'): Sign extend displacement.
4212 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4214 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4215 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4216 host_makefile_frag or frags.
4217 * aclocal.m4: New file.
4218 * configure: Rebuild.
4219 * Makefile.in (INSTALL): Set to @INSTALL@.
4220 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4221 (INSTALL_DATA): Set to @INSTALL_DATA@.
4223 (AR_FLAGS): Set to rc rather than qc.
4224 (CC): Define as @CC@.
4225 (CFLAGS): Set to @CFLAGS@.
4226 (@host_makefile_frag@): Remove.
4227 (config.status): Remove dependency upon @frags@.
4229 * configure.in: ../bfd/config.bfd now just sets shell variables.
4230 Use them rather than looking through target Makefile fragments.
4231 * configure: Rebuild.
4233 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4235 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4237 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4239 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4240 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4243 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4244 (lookup_{name,value}): New functions.
4245 (prefetch_table): New static local.
4246 (sparc_{encode,decode}_prefetch): New functions.
4247 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4249 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4251 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4254 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4256 * sh-dis.c: Correct comment on first line of file.
4258 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4260 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4262 * sparc-opc.c (asi, membar): New static locals.
4263 (sparc_{encode,decode}_{asi,membar}): New functions.
4264 (sparc_opcodes, membar insn): Fix.
4265 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4266 Support decoding of membar masks.
4269 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4271 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4273 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4275 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4276 and likewise for the other branches. Add bhs as an alias for bcc,
4277 and likewise for the size variants. Add dbhs as an alias for
4280 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4282 * sh-opc.h (FP sts instructions): Update to match reality.
4284 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4286 * m68k-dis.c: (fpcr_names): Add % before all register names.
4287 (reg_names): Likewise.
4288 (print_insn_arg): Don't explicitly print % before register names.
4289 Add % before register names in static array names. In case 'r',
4290 print data registers as `@(Dn)', not `Dn@'. When printing a
4291 memory address, don't print @# before it.
4292 (print_indexed): Change base_disp and outer_disp from int to
4293 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4294 syntax. Sign extend 8 byte displacement correctly.
4295 (print_base): Print using MIT syntax. Print zpc when appropriate.
4296 Change parameter disp from int to bfd_vma.
4298 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4301 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4303 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4304 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4305 * sh-opc.h (sh_arg_type): Add new operand types.
4306 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4308 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4310 * Makefile.in (distclean): Remove generated file config.h.
4312 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4314 * Makefile.in (distclean): Remove generated file config.h.
4316 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4318 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4320 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4322 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4323 rather than numopcodes. Use m68k_opcodes rather than removed
4324 opcode function. Don't check F_ALIAS.
4325 (print_insn_arg): Change first parameter to be const char *.
4326 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4327 (m68k-opc.o): New target.
4328 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4329 * configure: Rebuild.
4331 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4333 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4334 (opcode_bits, opcode_hash_table): New variables.
4335 (opcodes_initialized): Renamed from opcodes_sorted.
4336 (build_hash_table): New function.
4337 (is_delayed_branch): Use hash table.
4338 (print_insn): Renamed from print_insn_sparc, made static.
4339 Build and use hash table. If !sparc64, ignore sparc64 insns,
4340 and vice-versa if sparc64.
4341 (print_insn_sparc, print_insn_sparc64): New functions.
4342 (compare_opcodes): Move sparc64 opcodes to end.
4343 Print commutative insns with constant second.
4344 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4346 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4348 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4349 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4350 avoids printing a delay slot in a delay slot.
4351 * sh-opc.h (sh_table): Fully bracket last entry.
4353 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4355 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4357 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4359 * configure.in: Get host_makefile_frag from ${srcdir}.
4361 * configure.in: Autoconfiscated. Check for string[s].h. Create
4362 config.h from config.in. Don't set up sysdep.h link.
4363 * sysdep.h: New file.
4364 * configure, config.in: New files, generated from configure.in.
4365 * Makefile.in: Updated to be processed autoconf-style.
4366 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4367 (Makefile): Depend on config.status.
4368 (config.status): New rule.
4369 * configure.bat: Update Makefile substitutions.
4371 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4373 * mips-opc.c (L1): Define.
4374 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4375 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4378 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4380 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4381 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4382 have multiple add units but only a single logical unit.
4384 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4385 shifted by 18, without any insertion or extraction function.
4386 (insert_cr, extract_cr): Remove.
4388 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4390 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4393 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4395 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4396 * sh-opc.h: Add copyright.
4398 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4400 * Makefile.in (crunch-m68k): Delete extra target accidentally
4401 checked in a while ago.
4403 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4405 * sh-opc.h (sh_table): Add SH3 support.
4407 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4409 * sh-opc.h: Added bsrf and braf.
4411 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4413 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4414 bogus [ls]fm{ea,fd} patterns.
4416 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4417 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4418 initialize it from memory. Make function static.
4419 (print_insn_{big,little}_arm): New functions.
4420 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4421 the correct endianness.
4423 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4425 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4428 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4430 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4431 17th, so that it builds again using GCC as the compiler.
4433 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4435 * mips-dis.c (print_insn_little_mips): Cast return value from
4436 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4437 expects an unsigned long, and that might be fewer words of
4438 argument storage (e.g., if bfd_vma is long long on a 32-bit
4440 (print_insn_big_mips): Likewise with bfd_getb32 value.
4441 (_print_insn_mips): Now static.
4443 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4445 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4446 gcc memory hog problem with initializer is fixed.
4448 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4450 Merge in support for Mac MPW as a host.
4451 (Old change descriptions retained for informational value.)
4453 * mpw-config.in (archname): Compute from the config.
4454 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4456 * mpw-config.in (target_arch): Compute from canonical target.
4457 (m68k, mips, powerpc, sparc): Add architectures.
4458 * mpw-make.in (disassemble.c.o): Add.
4459 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4461 * mpw-config.in (BFD_MACHINES): Set to a default value.
4462 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4464 * mpw-make.in (CSEARCH): Add extra-include to search path.
4466 * mpw-config.in (varargs.h): Don't create.
4467 (sysdep.h): Create using forward-include.
4468 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4470 * mpw-config.in: New file, MPW version of configure.in.
4471 * mpw-make.in: New file, MPW version of Makefile.in.
4473 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4475 * alpha-dis.c (print_insn_alpha): Put empty statement after
4478 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4480 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4481 (low_sign_extend): Likewise.
4482 (get_field): Delete unused function.
4483 (set_field, deposit_14, deposit_21): Likewise.
4485 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4487 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4490 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4492 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4494 * alpha-opc.h (OSF_ASMCODE): define
4495 print pal-code names as defined in App C of the
4496 Alpha Architecture Reference Manual
4498 * alpha-dis.c: cleaned up output
4499 print stylized code forms as defined in App A.4.3 of the
4500 Alpha Architecture Reference Manual
4502 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4504 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4506 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4509 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4511 * m68k-dis.c (opcode): New function. Returns address of opcode
4512 table entry given index, even if the opcode table was split to
4513 work around gcc bugs.
4514 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4516 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4517 (reg_names): Now const.
4518 (print_insn_arg): Arrays cacheFieldName and names now const.
4519 (print_indexed): Array scales now const.
4521 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4523 * ppc-opc.c: Sort recently added instructions by minor opcode
4524 number within major opcode number.
4526 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4528 * hppa-dis.c: Include libhppa.h.
4530 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4532 * mips-opc.c: Change dli to use M_DLI, and add dla.
4534 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4536 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4538 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4540 * mips-opc.c: Add r4650 mul instruction.
4542 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4544 * mips-opc.c: Add uld and usd macros for unaligned double load and
4547 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4549 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4550 mfdcr, mtdcr, icbt, iccci.
4552 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4554 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4555 signed char fields to shorts, more portable.
4557 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4559 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4560 char fields as signed chars, since they may have negative values.
4562 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4564 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4565 (mycroft@netbsd.org).
4567 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4569 From "Logg, Ed" <elogg@ea.com>:
4570 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4571 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4574 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4576 * ppc-opc.c: Changes based on patch from David Edelsohn
4577 <edelsohn@mhpcc.edu>.
4578 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4581 (insert_tbr): New static function.
4582 (extract_tbr): New static function.
4583 (XFXFXM_MASK, XFXM): Define.
4584 (XSPRBAT_MASK, XSPRG_MASK): Define.
4585 (powerpc_opcodes): Add instructions to access special registers by
4586 name. Add mtcr and mftbu.
4588 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4590 * mips-opc.c (P3): Define.
4591 (mips_opcodes): Add mad and madu.
4593 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4595 * configure.in: Add W65 support.
4596 * disassemble.c: Likewise.
4597 * w65-opc.h, w65-dis.c: New files.
4599 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4601 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4604 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4606 * mips-opc.c: Add dli as a synonym for li.
4608 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4610 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4611 print something for reserved opcode values, even if it won't
4614 * mips-dis.c (_print_insn_mips): When initializing, shift right
4615 and mask, to avoid sign extension problems on the Alpha.
4617 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4620 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4622 * sh-opc.h (mov.l gbr): Get direction right.
4623 * sh-dis.c (print_insn_shx): New function.
4624 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4625 print opcodes with right byte order.
4627 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4629 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4630 to avoid conflicts with getopt.
4632 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4634 * hppa-dis.c (print_insn_hppa): Read the instruction using
4635 bfd_getb32, so that it works on a little endian or 64 bit host.
4636 Remove unused local variable op.
4638 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4640 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4641 addu does not work correctly if -mips3.
4643 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4645 * a29k-dis.c (print_special): Add special register names defined
4646 on 29030, 29040 and 29050.
4647 (print_insn): Handle new operand type 'I'.
4649 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4651 * Makefile.in (INSTALL): Use top level install.sh script.
4653 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4655 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4656 that it works on a little endian host.
4658 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4660 * configure.in: Use ${config_shell} when running config.bfd.
4662 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4664 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4666 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4668 * a29k-dis.c (print_insn): Print the opcode.
4670 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4672 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4674 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4676 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4678 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4680 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4681 which store a value into memory.
4683 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4685 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4686 * arm-dis.c, arm-opc.h: New files.
4688 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4690 * Makefile.in (ns32k-dis.o): Add dependency.
4691 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4692 string, not as array of chars.
4694 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4696 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4698 * sparc-opc.c: Added sparclite extended FP operations, and
4699 versions of v9 impdep* instructions permitting specification of
4702 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4704 * i960-dis.c (reg_names): Now const.
4705 (struct sparse_tabent): New type, copied from array type in mem
4707 (ctrl): Local static array ctrl_tab now const.
4708 (cobr): Local static array cobr_tab now const.
4709 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4710 static variable mem_tab no longer explicitly initialized. Changed
4711 mem_init to const array of struct sparse_tabent.
4712 (reg): Local static variable reg_tab no longer explicitly
4713 initialized. Changed reg_init to const array of struct
4715 (ea): Local static array scale_tab now const.
4717 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4720 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4722 * configure.bat: the disassember needs to be enabled for
4723 "objdump -d" to work in djgpp.
4725 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4727 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4728 (invalid_float): Enabled general version, doesn't require running
4729 on ns32k host. Changed to take char* argument, and test for
4730 explicitly specified sizes, instead of using sizeof() on host CPU
4732 (INVALID_FLOAT): Cast first argument.
4733 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4734 list_P032, list_M032): Now const.
4735 (optlist, list_search): Made appropriate arguments now point to
4737 (print_insn_arg): Changed static array of one-character-string
4738 pointers into a static const array of characters; fixed sprintf
4739 statement accordingly.
4741 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4743 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4744 from distribution. A ns32k-dis.c from a previous distribution has
4745 been brought up to date and supports the new interface.
4747 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4749 * configure.in: add bfd_ns32k_arch target support.
4751 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4752 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4754 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4756 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4759 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4761 * h8300-dis.c, mips-dis.c: Don't use true and false.
4763 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4765 * configure.in: Change --with-targets to --enable-targets.
4767 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4769 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4770 opcodes to the first instruction with that opcode, to speed
4771 disassembly of large files. From ralphc@pyramid.com (Ralph
4774 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4776 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4778 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4780 * configure.bat: update to latest makefile.in
4782 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4784 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4785 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4786 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4787 slot insn is in a delay slot.
4788 * z8k-opc.h: (resflg): Fix patterns.
4789 * h8500-opc.h Fix CR insn patterns.
4791 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4793 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4794 "cmpl" before POWER versions, so that gas -many uses them.
4796 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4798 * disassemble.c: New file.
4799 * Makefile.in (OFILES): Add disassemble.o.
4800 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4801 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4802 binutils/configure.in.
4804 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4805 opcode being examined.
4807 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4809 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4810 (insert_ral, insert_ram, insert_ras): New functions.
4811 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4812 RAS for store with update.
4814 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4816 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4817 (edelsohn@npac.syr.edu).
4819 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4821 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4824 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4826 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4828 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * ppc-opc.c (powerpc_operands): The signedp field has been
4831 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4832 instead. Add new operand SISIGNOPT.
4833 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4834 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4835 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4838 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4840 * i386-dis.c (struct private): Renamed to dis_private. `private'
4841 is a reserved word for dynix cc.
4843 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4845 * configure.in: Change error message to refer to bfd/config.bfd
4846 rather than bfd/configure.in.
4848 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4850 * ppc-opc.c: Define POWER2 as short alias flag.
4851 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4854 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4856 * i960-dis.c (print_insn_i960): Don't read a second word for
4857 opcodes 0, 1, 2 and 3.
4859 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4861 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4863 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4865 * m68881-ext.c: Removed; no longer used.
4866 * Makefile.in: Changed accordingly.
4868 * m68k-dis.c (ext_format_68881): Don't declare.
4869 (print_insn_m68k): If an instruction uses place 'i', it uses at
4870 least four fixed bytes.
4871 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4872 extended float, convert to double using floatformat_to_double, not
4873 ieee_extended_to_double, and fetch the data before converting it.
4875 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4877 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4878 davidj@ICSI.Berkeley.EDU (David Johnson).
4880 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4882 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4883 PowerPC uses bdnz[l][a].
4885 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4887 * dis-buf.c, i386-dis.c: Include sysdep.h.
4889 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4891 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4893 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4894 by Motorola PowerPC 601 with PPC_OPCODE_601.
4895 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4896 Disassemble Motorola PowerPC 601 instructions as well as normal
4897 PowerPC instructions.
4899 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4901 * i960-dis.c (reg, mem): Just use a static array instead of
4904 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4906 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4907 condition name index if this is for a negated condition.
4909 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4910 Floating point format for 'H' operand is backwards from normal
4911 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4912 operands (fmpyadd and fmpysub), handle bizarre register
4913 translation correctly for single precision format.
4915 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4916 or 'I' operands if the next format specifier is 'M' (fcmp
4917 condition completer).
4919 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4921 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4922 single number giving a bitmask for the MB and ME fields of an M
4923 form instruction. Change NB to accept 32, and turn it into 0;
4924 also turn 0 into 32 when disassembling. Seperated SH from NB.
4925 (insert_mbe, extract_mbe): New functions.
4926 (insert_nb, extract_nb): New functions.
4927 (SC_MASK): Mask out SA and LK bits.
4928 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4929 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4930 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4931 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4932 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4933 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4934 (powerpc_macros): Define table of macro definitions.
4935 (powerpc_num_macros): Define.
4937 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4938 if PPC_OPERAND_NEXT is set.
4940 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4942 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4943 char. Retrieve contents using bfd_getl32 instead of shifting.
4945 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4947 * ppc-opc.c: New file. Opcode table for PowerPC, including
4948 opcodes for POWER (RS/6000).
4949 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4950 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4951 (CFILES): Add ppc-dis.c.
4952 (ppc-dis.o, ppc-opc.o): New targets.
4953 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4955 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4957 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4958 No space before 'u', 'f', or 'N'.
4960 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4962 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4963 farther than we should.
4965 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4967 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4969 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4971 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4973 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4974 needs it, to prevent reading past the end of a section.
4976 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4978 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4979 Removed t,A case for la; always use t,A(b) case.
4981 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4983 From Ted Lemen <mellon@pepper.ncd.com>
4984 * mips-dis.c (print_insn_arg): Handle 'k'.
4985 * mips-opc.c: Make cache use k, not t.
4987 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4989 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4990 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4991 FLOAT_FORMAT_CODE to put out floating point register names.
4993 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4995 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4997 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4999 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5001 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5003 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5004 larger than 32. Moved dsxx32 variants first for disassembler.
5006 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5008 * z8kgen.c, z8k-opc.h: Add full lda information.
5010 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5012 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5013 movb instructions. Any necessary space will be emitted by
5014 the code to handle nullification completers.
5016 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5018 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5020 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5022 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5023 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5025 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5027 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5029 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5031 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5032 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5034 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5036 * m88k-dis.c (m88kdis): comment change. Remove space after
5038 (printop): handle new arg types DEC and XREG for m88110.
5040 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5042 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5043 type for absolute branch addresses. Delete special
5044 "ble" and "be" code in 'W' operand code.
5046 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5048 * mips-opc.c: Set hazard information correctly for branch
5049 likely instructions.
5051 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5053 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5054 info->fprintf_func for printing and info->print_address_func for
5057 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5059 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5061 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5063 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5064 Corrected second case of "b" for disassembler.
5066 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5068 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5069 to BFD swapping routines to correspond to BFD name changes.
5071 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5073 * mips-opc.c: Change div machine instruction to be z,s,t rather
5074 than s,t. Change div macro to be d,v,t rather than d,s,t.
5075 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5076 rem and remu which generates only the corresponding div
5077 instruction. This is for compatibility with the MIPS assembler,
5078 which only generates the simple machine instruction when an
5079 explicit destination of $0 is used.
5080 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5082 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5084 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5085 WR_31 hazard for bal, bgezal, bltzal.
5087 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5089 * hppa-dis.c (print_insn_hppa): Use print function
5090 from within the disassemble_info, not fprintf_filtered.
5092 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5094 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5095 Law, law@cs.utah.edu.)
5097 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5099 * mips-opc.c ("absu"): Removed.
5102 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5104 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5105 Changed hazard information to distinguish between memory load
5106 delays and coprocessor load delays.
5108 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5110 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5112 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5114 * configure.in: Don't pass cpu to config.bfd.
5116 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5118 * m88k-dis.c (m88kdis): Make class unsigned.
5120 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5122 * alpha-dis.c (print_insn_alpha): One branch format case was
5123 missing the instruction name.
5125 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5127 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5128 Add the arch-specific auxiliary files.
5129 (OFILES): Remove the arch-specific auxiliary files
5130 and use BFD_MACHINES instead of DIS_LIBS.
5131 * configure.in: Set BFD_MACHINES based on --with-targets option.
5133 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5135 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5138 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5140 * sparc-opc.c: Change CONST to const to deal with gcc
5141 -Dconst=__const -traditional.
5143 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5145 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5146 coprocessor instructions out of #if 0, and made them use new
5149 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5151 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5153 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5155 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5156 instruction, for use by the disassembler.
5158 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5159 hand-coded sign extensions that depended on 32-bit host ints.
5160 FIXME, we still depend on big-endian host bitfield ordering.
5161 (sparc_print_insn): Set the insn_info_valid field, and the
5162 other fields that describe the instruction being printed.
5164 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5166 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5167 `jmp' instead of just one of them.
5169 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5171 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5172 (fput_fp_reg_r): Renamed from fput_reg_r.
5173 (fput_fp_reg): New function.
5174 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5176 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5178 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5180 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5182 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5184 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5185 don't output a space.
5187 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5189 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5191 * mips-opc.c: New file, containing opcode table from
5192 ../include/opcode/mips.h.
5193 * Makefile.in: Add it.
5195 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5197 * m88k-dis.c: New file, moved in from gdb and changed to use the
5198 new dis-asm.h disassembler interface.
5199 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5200 (m88k-dis.o): New target.
5202 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5204 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5205 argument string const char * to correspond to opcode/mips.h.
5207 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5209 * mips-dis.c: Updated to account for name changes in new version
5211 * Makefile.in: Added header file dependencies.
5213 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5215 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5217 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5219 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5220 extend, rather than shifts.
5222 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5224 * Makefile.in: Undo 15 June change.
5226 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5228 * m68k-dis.c (print_insn_arg): Change return value to byte count
5230 * m68k-dis.c: Re-write to detect invalid operands before
5231 printing anything, so we can handle this the same way we
5232 handle invalid opcodes.
5234 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5236 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5238 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5240 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5243 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5245 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5247 * configure.in: Do make sysdep.h link.
5248 * Makefile.in: Search ../include. Don't search ../bfd.
5250 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5252 Changes from Jeff Law, law@cs.utah.edu:
5253 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5254 Do not print a space before the completers specified by
5257 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5259 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5260 defined, since gdb has been fixed.
5262 Changes from Jeff Law, law@cs.utah.edu:
5263 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5264 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5265 be a *disassemble_info, not a *FILE.
5266 * hppa-dis.c: Support 'd', '!', and 'a'.
5267 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5268 * hppa-dis.c: Delete cases which are no longer needed.
5270 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5272 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5274 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5276 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5279 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5281 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5282 * configure.in: No longer need to configure to get sysdep.h.
5284 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5286 * Patches from Jeffrey Law <law@cs.utah.edu>.
5287 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5288 templates for 1.1 FP computational instructions.
5290 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5292 * h8500-dis.c (print_insn_h8500): Address argument is type
5294 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5297 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5298 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5300 * sparc-dis.c (compare_opcodes): Move static declaration to
5303 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5305 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5306 instruction, remove unimp hack from 'l' argument.
5308 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5310 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5313 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5315 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5316 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5319 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5321 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5322 arrays of string pointers to 2-d arrays of chars, to save
5325 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5327 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5328 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5330 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5332 * hppa-dis.c: New file from Utah, adapted to new disassembler
5334 * Makefile.in: Include it.
5336 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5338 * sh-dis.c, sh-opc.h: New files.
5340 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5342 * alpha-dis.c, alpha-opc.h: New files.
5344 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5346 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5349 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5351 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5353 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5355 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5358 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5360 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5361 and double percent signs a few places.
5363 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5365 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5366 Use info->print_address_func not print_address.
5368 * dis-buf.c (generic_print_address): New function.
5370 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5372 * Makefile.in: Add sparc-dis.c.
5373 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5375 Add `add' instruction to the set that get checked
5376 for a preceding `sethi' in order to print an absolute address.
5377 * (print_insn): Disassembly prefers real instructions.
5378 (is_delayed_branch): Speed up.
5379 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5380 Still missing some float ops, and needs testing.
5381 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5382 F_ALIAS. Use printf, not fprintf, when not passing a file
5384 (compare_opcodes): Check that identical instructions have
5385 identical opcodes, complain otherwise.
5388 * Include reg_names.
5390 Use dis-asm.h/read_memory_func interface.
5392 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5394 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5395 deliberately return non-zero to setjmp from longjmp. Otherwise
5396 this code fails to compile.
5398 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5400 * m68k-dis.c: Fix prototype for fetch_arg().
5402 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5404 * dis-buf.c: New file, for new read_memory_func interface.
5405 Makefile.in (OFILES): Include it.
5406 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5407 Use new read_memory_func interface.
5409 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5411 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5412 * h8500-opc.h: Fix couple of opcodes.
5414 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5416 * Makefile.in: add dvi & installcheck targets
5418 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5420 * Makefile.in: Update for h8500-dis.c.
5422 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5424 * h8500-dis.c, h8500-opc.h: New files
5426 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5428 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5429 ../include/dis-asm.h.
5430 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5431 and ../gdb/m68k-pinsn.c).
5432 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5433 and ../gdb/i386-pinsn.c).
5434 * m68881-ext.c: New file. Moved definition of
5435 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5436 * Makefile.in: Adjust for new files.
5437 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5438 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5439 can be dis-assembled.
5441 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5443 * mips-dis.c (print_insn_arg): Now returns void.
5445 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5447 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5448 files that use the macros.
5450 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5452 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5453 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5454 (CFILES): Added mips-dis.c.
5456 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5458 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5459 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5461 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5463 * Makefile.in: Improve *clean rules.
5464 * configure.in: Allow a default host.
5466 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5468 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5469 files include other sysdep files
5471 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5473 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5475 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5477 * configure.in: For host support, use ../bfd/configure.host
5478 so it stays in sync with the ../bfd/hosts database.
5480 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5482 * configure.in: use cpu-vendor-os triple instead of nested cases
5484 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5486 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5487 *always* the wrong one.
5489 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5491 * z8kgen.c: added copyright info
5493 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5495 * z8k-dis.c (unparse_instr): prettier tabs
5496 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5498 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5500 * configure.in: Add ncr* configuration.
5501 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5502 picayune ANSI compilers happy.
5504 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5506 * configure.in (i386): Make i386 and i486 synonymous for now.
5507 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5509 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5511 * Makefile.in (install): Fix typo.
5513 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5515 * Makefile.in (make): Remove obsolete crud.
5516 (sparc-opc.o): Avoid Sun Make VPATH bug.
5518 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5520 * Makefile.in: since there are no SUBDIRS, remove rule and
5521 references of subdir_do.
5523 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5525 * Makefile.in (install): Get the library name right here too.
5526 Don't install bfd.h, since it's unrelated to this library. No
5527 subdirs to recurse into, either.
5528 (CFILES): The source file has a .c suffix, not .o.
5530 * sparc-opc.c: New file, moved from BFD.
5531 * Makefile.in (OFILES): Build it.
5533 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5535 * z8k-dis.c: fixed forward refferences of some declarations.
5537 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5539 * Makefile.in: get the name of the library right
5541 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5543 * z8k-dis.c: knows how to disassemble z8k stuff
5544 * z8k-opc.h: new file full of z8000 opcodes
5548 version-control: never