2 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
4 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
6 (print_insn_little_arm): Likewise.
9 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
11 Move all global state data into opcode table struct, and treat
12 opcode table as something that is "opened/closed".
13 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
14 (cgen_asm_init): Delete.
15 (cgen_set_parse_operand_fn): New function.
16 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
17 (cgen_dis_init): Delete.
18 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
19 (cgen_current_{opcode_table_mach,endian}): Delete.
21 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
22 * cgen-dis.in (all fns): Ditto.
23 * cgen-opc.in (all fns): Ditto.
25 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
28 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
30 * cgen-dis.in (print_normal): Split into two.
31 (print_address): New function.
32 (extract_insn_normal): Clarify insn_value arg.
33 (print_int_insn): Renamed from print_insn.
34 (print_insn): New arg.
35 (print_insn_@arch@): Open opcode table if not already done so.
36 Move reading of insn into print_insn.
39 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
41 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
45 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
47 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
48 accept an accumulator choice.
49 * m32r-opc.c,m32r-opc.h: Regenerate.
52 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
54 * m10300-opc.c: Add entries for "no_match_operands" field in
58 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
60 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
64 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
66 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
69 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
71 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
73 * m10300-opc.c: Add autoincrement memory loads/stores.
77 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
79 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
83 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
86 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
88 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
89 @arch_cgen_get_int_operand.
90 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
91 Update call to @arch@_cgen_insert_operand.
92 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
93 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
94 (extract_insn_normal): New arg `pc', callers updated.
95 Update call to @arch@_cgen_extract_operand.
96 (print_insn): Update call to CGEN_EXTRACT_FN.
98 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
101 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
103 * m10300-opc.c: Fix load to sp and store from sp for the am33.
104 Add more multimedia instructions.
106 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
108 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
113 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
115 * mips-opc.c (pref): Enabled for the r5900.
118 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
120 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
122 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
124 (OP_J): Remove unnecessary subtraction when 16-bit displacement
125 will be masked later.
128 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
130 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
133 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
135 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
136 from raw register #s to symbolic names to make debugging easier.
139 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
141 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
143 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
145 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
146 start-sanitize-cygnus
147 * Makefile.am (CGENDIR): Set via configure.
148 (CGEN): New variable.
149 (CGENFILES): object.scm renamed to cos.scm.
150 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
151 (stamp-m32r): Pass prefix to run-cgen.
152 * Makefile.in: Regenerate.
153 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
154 * cgen-dis.in: Ditto.
155 * cgen-opc.in: Ditto.
156 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
157 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
158 * configure: Regenerate.
162 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
164 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
166 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
168 * m10300-opc.c: Reorder more instructions so that we do not
169 accidentally match a mn10300 instruction when we really
170 wanted an am33 instruction.
173 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
175 * m10300-dis.c: Only recognize instructions from the currently
177 * m10300-opc.c: Add field indicating the particular variant of
178 the mn10300 each instruction is available on.
180 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
182 * configure.in: For bfd_vax_arch, build vax-dis.lo.
183 * Makefile.am: Rebuild dependencies.
184 (CFILES): Add vax-dis.c.
185 (ALL_MACHINES): Add vax-dis.lo.
186 * aclocal.m4: Rebuild with current libtool.
187 * configure, Makefile.in: Rebuild.
189 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
191 * vax-dis.c: New file, from work by Pauline Middelink
192 <middelin@polyware.iaf.nl>.
193 * disassemble.c (ARCH_vax): Define if ARCH_all.
194 (disassembler): Add case for ARCH_vax.
195 * makefile.vms: Support compilation on vms/vax.
198 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
200 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
201 the DVP_OPERAND_RELOC_11_S4 relocation.
205 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
207 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
209 (disassemble): Correctly handle FMT_D10 instructions.
211 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
212 am33 shift instructions.
214 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
216 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
217 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
219 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
220 (mn10300_opcodes): Reorder so as to try and select opcodes from
221 the core chip when multiple alternatives exist. Change several
222 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
223 "macbu" instructions. Fix typos in a couple DSP instructions too.
226 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
228 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
229 related to sign extension and the size of ints.
231 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
233 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
234 instructions. Support (sp) addressing mode by expanding it into
238 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
240 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
241 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
242 be used as immediate values.
246 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
248 * m10300-opc.c: Support 4 byte DSP instructions.
251 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
253 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
256 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
258 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
261 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
263 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
266 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
268 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
269 found on the mn10300.
272 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
274 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
277 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
279 * mips-dis.c (print_insn_little_mips): Previously, instruction
280 printing references the symbol table to determine whether the
281 instruction resides in a block regular instructions or mips16
282 instructions. However, when the disassembler gets used in other
283 environments where the symbol table is not present, we no longer
284 rely in the symbol table, rather, use the low bit of the
285 instructions address to guess. There should be no change for usage
286 of the disassembler in host based programse, gdb ,objdump.
287 (print_insn_big_mips): ditto.
288 (print_insn_mips): ditto
290 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
292 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
294 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
297 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
298 operands for the am33.
299 (mn10300_opcodes): Add new instructions from the am33.
301 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
303 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
305 * i386-dis.c (index16): Add '%' to register names. Use ','
308 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
310 * i386-dis.c: Don't print opcode suffix when we can figure out the
311 size (and gas can!) by register operands, or from the default
313 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
315 (dis386, dis386_twobyte, grps): Use new suffix macros.
316 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
317 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
318 order of cmps operands to agree with Intel docs. Correct operand
319 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
320 agree with Intel docs.
321 (print_insn_x86): Print orphan fwait before other prefixes.
322 Return correct byte count for orphan fwait with prefixes. Don't
323 print `bound' operands in reverse order.
324 (ckprefix): Stop accumulating prefixes if we get fwait.
325 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
327 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
329 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
330 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
332 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
334 Fix problems when bfd_vma is wider than long.
335 * i386-dis.c: Make op_address and start_pc unsigned.
336 (set_op): Make parameter unsigned.
337 (print_insn_x86): Cast to bfd_vma when passing a value to
339 * ns32k-dis.c (CORE_ADDR): Don't define.
340 (print_insn_ns32k): Change type of addr to bfd_vma. Use
341 bfd_scan_vma to read back address.
342 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
344 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
345 (NEXTULONG): New definition.
346 (print_insn_m68k): Avoid overflow when computing third argument of
348 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
349 Use disp instead of val to store offset values.
350 (print_indexed): Use base_disp instead of word to store base
351 displacement, to avoid overflow.
352 * m10300-dis.c (disassemble): Cast value to long when computing
353 pc-relative address, to get correct sign extension.
355 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
357 * m32r-opc.c: Regenerate.
359 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
361 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
362 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
364 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
366 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
368 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
370 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
372 (OP_DSreg): Rename from OP_DSSI.
373 (OP_ESreg): Rename from OP_ESDI.
374 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
376 (append_seg): Rename from append_prefix.
377 (ptr_reg): New function.
378 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
380 (PREFIX_ADDR): Rename from PREFIX_ADR.
381 (float_reg): Add non-broken opcodes for people who don't want
384 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
386 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
389 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
391 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
393 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
395 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
396 0; produce error message for shifts of size 32 (or 64 for 64-bit
397 shifts), because the hardware doesn't support them.
400 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
402 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
405 * vu0.h (sqc2): Fix opcode.
407 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
411 start-sanitize-vr5400
412 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
414 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
415 Change pinfo to use WR_HILO.
418 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
420 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
421 LONG_2, LONG_2b formats to use this new operand.
423 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
425 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
427 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
429 * sparc-dis.c (print_insn_sparc): big endian instruction / little
432 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
434 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
435 and SHORT_B3b formats to use Rb instead of Ra.
437 Add FLAG_MUL16 to MUL2XH opcode.
439 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
440 to existing 1.1.1 parallelisation prohibition procedure.
442 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
444 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
445 * cgen-dis.in (extract_normal): Likewise.
446 * m32r-asm.c,m32r-dis.c: Regenerate.
449 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
451 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
455 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
457 * mips-opc.c (multu1): Add two operand variant for the r5900.
460 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
462 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
463 with a shift count of 0.
466 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
468 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
470 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
472 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
473 (_print_insn_mips): Likewise.
474 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
478 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
480 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
481 (cgen_hw_lookup_by_num): New function.
484 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
487 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
489 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
491 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
493 * sparc-dis.c (print_insn_sparc): Always fetch instructions
494 as big-endian on SPARClite.
497 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
499 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
501 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
505 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
507 * d30v-opc.c (pre_defined_register): Remove alias for r0.
510 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
512 * mips-opc.c (break): Added 20-bit single-operand break
513 instruction for R5900 only.
516 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
518 * po/Make-in (install-info): New target.
520 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
522 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
523 * configure: Rebuild.
525 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
527 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
528 variety of ISA2 instructions to set bottom ten bits of trap code.
530 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
532 * Makefile.am (config.status): Add explicit target so that
533 config.status depends upon bfd/configure.in.
534 * Makefile.in: Rebuild.
536 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
538 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
539 instructions to set bottom ten bits of break code.
540 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
541 for above optional argument.
543 start-sanitize-cygnus
544 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
546 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
547 * m32r-opc.h: Regenerate.
550 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
552 * makefile.vms: Run dec c with /nodebug.
554 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
556 * Makefile.in: Rebuilt.
557 * Makefile.am: Regenerated dependencies with mkdep.
559 * opintl.h (_): Define as dgettext.
561 start-sanitize-cygnus
562 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
564 * configure.in: Add support for --enable-cgen-maint.
565 * Makefile.am (M32R_DEPS): New variable.
566 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
567 * aclocal.m4: Regenerate.
568 * Makefile.in: Regenerate.
569 * configure: Regenerate.
571 * Makefile.am (CGENFILES): Add minsn.scm.
574 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
576 * cgen-asm.c: Internationalised.
577 start-sanitize-cygnus
578 * cgen-asm.in: Internationalised.
579 * cgen-opc.in: Internationalised.
581 * m32r-asm.c: Internationalised.
582 * m32r-dis.c: Internationalised.
583 * m32r-opc.c: Internationalised.
585 * aclocal.m4: Regenerated.
586 * configure: Regenerated.
587 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
588 * Makefile.in: Rebuild.
589 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
590 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
592 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
594 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
596 * aclocal.m4, configure: Rebuild with current tools.
598 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
600 * opintl.h: New file - contains internationalisation macros used
601 by source files in this directory.
602 * po/: New subdirectory - contains internationalisation files.
603 * po/Make-in: New file - Makefile constructor.
604 * po/POTFILES.in: New file - list of files in opcodes directory
605 that should be scan for internationalisation macros.
606 * po/opcodes.pot: New file - list of internationisation strings
607 found in files mentioned in po/POTFILES.in.
608 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
609 entry. Add intl directory to include paths.
610 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
611 HAVE_STRCPY, HAVE_LC_MESSAGES
612 * configure.in: Add rule to build Makefile in po subdirectory.
613 * Makefile.in: Rebuilt.
614 * aclocal.m4: Rebuilt.
615 * config.in: Rebuilt.
616 * configure: Rebuilt.
617 * alpha-opc.c: Internationalised.
618 * arc-dis.c: Internationalised.
619 * arc-opc.c: Internationalised.
620 * arm-dis.c: Internationalised.
621 * cgen-asm.c: Internationalised.
622 * d30v-dis.c: Internationalised.
623 * dis-buf.c: Internationalised.
625 * dvp-dis.c: Internationalised.
626 * dvp-opc.c: Internationalised.
628 * h8300-dis.c: Internationalised.
629 * h8500-dis.c: Internationalised.
630 * i386-dis.c: Internationalised.
631 * m10200-dis.c: Internationalised.
632 * m10300-dis.c: Internationalised.
633 * m68k-dis.c: Internationalised.
634 * m88k-dis.c: Internationalised.
635 * mips-dis.c: Internationalised.
636 * ns32k-dis.c: Internationalised.
637 * opintl.h: Internationalised.
638 * ppc-opc.c: Internationalised.
639 * sparc-dis.c: Internationalised.
640 * v850-dis.c: Internationalised.
641 * v850-opc.c: Internationalised.
643 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
645 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
646 (asm_hash_table_entries): New variable.
647 (cgen_asm_init): Free asm_hash_table_entries.
648 (hash_insn_array,hash_insn_list): New functions.
649 (build_asm_hash_table): Use them. Hash macro insns as well.
650 (cgen_asm_lookup_insn): Update.
651 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
652 (dis_hash_table_entries): New variable.
653 (cgen_dis_init): Free dis_hash_table_entries.
654 (hash_insn_array,hash_insn_list): New functions.
655 (build_dis_hash_table): Use them. Hash macro insns as well.
656 (cgen_dis_lookup_insn): Update.
657 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
658 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
659 (cgen_macro_insn_count): New function.
660 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
661 All callers updated. Sanity check result of extract fn.
662 (@arch@_cgen_get_insn_operands): Change result type to void.
663 Delete args insn_value, length. New arg fields. All callers updated.
664 (@arch@_cgen_lookup_get_insn_operands): New function.
665 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
667 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
669 * i386-dis.c (OP_DSSI): Print segment override.
672 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
674 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
678 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
680 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
684 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
686 * vu0.h (vlqd, vlqi): Update per revised specs.
690 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
692 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
693 (vif_operands): Update.
694 (vif_get_unpackloc): Delete.
695 (state_vif_unpackloc{,_star_p}): Delete.
696 (dvp_opcode_init_parse): Update.
697 (vif_unpack_len_value): Avoid divide by zero.
701 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
703 * vu0.h: Specs changed for VCALLMSR bit pattern.
704 * mips-dis.c: (print_insn_arg) Matching change.
707 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
709 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
712 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
714 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
715 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
716 * configure.in: Define and substitute WIN32LDFLAGS and
718 * aclocal.m4: Rebuild with new libtool.
719 * configure, Makefile.in: Rebuild.
722 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
724 * vu0.h: Corrected bit pattern for VMAXI opcode.
727 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
729 * m32r-opc.c: Regenerate.
732 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
734 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
735 (dvp_expand_macro): Implement.
736 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
737 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
740 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
742 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
743 before trying to copy it.
744 * Makefile.in: Rebuild.
746 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
748 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
751 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
753 * m32r-opc.c: Fix bit patterns for SAT and SATB.
756 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
758 * ns32k-dis.c (bit_extract_simple): New function to extract bits
759 from an arbitrary valid buffer instead of fetching them on demand
761 (invalid_float): use bit_extract_simple() instead of bit_extract().
764 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
766 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
767 * m32r-opc.h: Add extra control registers.
770 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
772 From H.J. Lu <hjl@gnu.org>:
773 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
776 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
778 * Branched binutils 2.9.
780 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
782 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
783 disassembling last 4 bytes of a section.
785 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
787 Fix some gcc -Wall warnings:
788 * arc-dis.c (print_insn): Add casts to avoid warnings.
789 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
790 * d10v-dis.c (dis_long, dis_2_short): Likewise.
792 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
793 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
794 (parse_bc, parse_vfreg, parse_accdest): Likewise.
795 (parse_ffstreg, parse_vif_mode): Likewise.
797 * m10200-dis.c (disassemble): Likewise.
798 * m10300-dis.c (disassemble): Likewise.
799 * ns32k-dis.c (print_insn_ns32k): Likewise.
800 * ppc-opc.c (insert_ral, insert_ram): Likewise.
801 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
802 * cgen-opc.c (cgen_keyword_search_next): Likewise.
803 * d10v-dis.c (dis_long, dis_2_short): Likewise.
804 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
806 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
807 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
808 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
810 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
812 * tic80-dis.c (print_one_instruction): Likewise.
814 * w65-dis.c (print_operand): Likewise.
815 * z8k-dis.c (fetch_data): Likewise.
816 * a29k-dis.c: Add return type for find_byte_func_type.
817 * arc-opc.c: Include <stdio.h>. Remove declarations of
818 insert_multshift and extract_multshift.
819 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
821 (extract_value): Fully parenthesize expression.
823 * dvp-opc.c: Include <ctype.h>.
824 (print_sdest): Add default case to switch.
826 * h8500-dis.c (print_insn_h8500): Initialize local variables.
827 * h8500-opc.h (h8500_table): Fully bracket initializer.
828 * w65-opc.h (optable): Likewise.
829 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
830 * i386-dis.c (OP_E): Initialize local variables.
831 * m10200-dis.c (print_insn_mn10200): Likewise.
832 * mips-dis.c (print_insn_mips16): Likewise.
833 * sh-dis.c (print_insn_shx): Likewise.
834 * v850-dis.c (print_insn_v850): Likewise.
835 * ns32k-dis.c (print_insn_arg): Declare.
836 (get_displacement, invalid_float): Declare.
837 (list_search, sign_extend, flip_bytes): Declare return type.
838 (get_displacement): Likewise.
839 (print_insn_arg): Likewise. Make d int. Fix sprintf format
841 (print_insn_ns32k): Make i unsigned.
842 (invalid_float): Make static. Declare type of val.
843 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
844 on each for iteration.
845 * tic30-dis.c (get_indirect_operand): Likewise.
846 * z8k-dis.c (print_insn_z8001): Declare return type.
847 (print_insn_z8002): Likewise.
848 (unparse_instr): Fix sprintf format strings.
850 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
852 * mips-opc.c: Add "sync.l" and "sync.p".
855 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
857 * dvp-opc.c (extract_vif_datalen): Rewrite.
858 (vif_insn_len): Perform 0->max+1 conversion for direct length.
860 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
862 * dvp-dis.c (print_insn): Print unpack address in hex.
863 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
864 Don't skip over '*', just record it.
865 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
866 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
867 Don't skip over '*', just record it.
868 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
869 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
870 (vif_opcodes): Likewise.
871 (state_vif_{mpg,unpack}loc_star_p): New static locals.
872 (vif_macros,vif_macro_count): New globals.
873 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
874 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
875 (vif_get_wl_cl): New function.
876 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
879 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
881 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
882 default m68k variant to recognize.
884 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
885 (ctrl, cobr, mem, ea): Likewise.
886 (print_addr): Likewise. Remove cast.
887 (ea): Cast argument of print_addr to bfd_vma.
889 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
891 (cgen_parse_unsigned_integer): Likewise.
892 (cgen_parse_address): Likewise.
894 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
896 * i960-dis.c (ctrl): Add full braces to structure initialization.
897 (cobr, mem, reg): Likewise.
898 (ea): Correct parenthesization in expression.
900 * cgen-asm.c: Include <ctype.h>.
901 (build_asm_hash_table): Remove unused local variable i.
902 (cgen_parse_keyword): Add casts to avoid warnings.
904 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
905 symbol. Fix indentation.
906 (print_insn_little_arm): Likewise.
909 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
911 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
916 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
918 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
923 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
925 * dvp-opc.c (vif_operand_datalen_special): New global.
929 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
931 * vu0.h (vcallms): Use 'O' for call target operand.
932 * mips-dis.c (print_insn_arg): Handle 'O'.
935 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
937 * configure.in: Use AM_DISABLE_SHARED.
938 * aclocal.m4, configure: Rebuild with libtool 1.2.
941 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
943 * mips-dis.c: Change '%' to '#' in r5900 support.
947 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
949 These patches are courtesy of Jonathan Walton and Tony Thompson
950 (athompso@cambridge.arm.com).
952 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
955 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
956 both the offset and the label closest to the destination.
959 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
961 * vu0.h: New file with cop2/vu0 instructions.
962 * mips-opc.c: Include vu0.h.
963 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
965 (print_insn_mips): Do not emit a tab after an instruction if the
966 first arg is an instruction completer (&). If the next arg is an
967 escape character (%), then print the next arg verbatim.
968 * Makefile.am (mips-opc.lo): Depend on vu0.h
972 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
974 * dvp-opc.c (vif_opcodes): Add stcycl.
976 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
978 * dvp-dis.c (print_dma): Change length from 16 to 8.
981 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
983 * m32r-opc.h: Regenerate.
986 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
988 * dvp-opc.c (print_dest1): Print dest spec again.
989 (print_vfreg,print_accdest): Likewise.
990 (vif_unpack_len): Round result up to word boundary.
993 start-sanitize-vr4320
994 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
996 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
998 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1000 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1005 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1007 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1008 (print_insn): Do mask comparison on proper opcode word.
1009 Print unsigned values in hex.
1010 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1011 (parse_bc): Catch missing dest.
1012 (parse_vfreg): Replace atoi call with strtol.
1013 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1014 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1015 (extract_gif_eop): New function.
1016 (gif_operands): Update eop entry.
1017 (VGIFOP,VGIFNREGS): Fix calcs.
1018 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1019 (gif_regs): Add entry for unused 11 case.
1020 (print_gif_regs): Print empty list instead of nothing.
1021 (extract_gif_nloop): Fix value calc.
1022 (print_gif_nloop): Always print value, even if 0.
1023 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1024 (vif_operands): Use them for wl,cl fields.
1025 (state_vif_wl,state_vif_cl): New static locals.
1026 (parse_vif_mode): Handle numeric args.
1027 (vif_unpack_len_value,vif_unpack_len): New functions.
1028 (vif_insn_len): Call vif_unpack_len.
1031 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1033 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1035 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1037 * cgen-asm.in: Move insertion of generated routines to top of file.
1038 (insert_normal): Add prototype. Delete `shift' arg.
1039 * cgen-dis.in: Move insertion of generated routines to top of file.
1040 (extract_normal): Add prototype. Delete `shift' arg.
1041 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1042 (print_keyword): Add prototype. Fix type of `attrs' arg.
1044 start-sanitize-vr4320
1045 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1047 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1048 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1051 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1053 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1054 assume that info->symbols is non-empty.
1056 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1058 * alpha-opc.c (cvtqs) There is no such thing.
1059 (cvttq): Missing most of the /*d variants.
1061 start-sanitize-r5900
1062 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1064 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1066 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1067 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1070 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1072 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1073 delayed branches or jumps.
1076 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1078 * dvp-opc.c (vif_operands): Add unpack[u] support.
1079 (vif_opcodes): Ditto.
1080 (*_vif_imrubits): Renamed from *_vif_imrbits.
1082 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1084 * dvp-dis.c (print_insn): Handle word number.
1085 Handle mips address vs vu address.
1086 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1087 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1088 ({insert,extract}_dma_addr): Fix word ofset.
1089 ({insert,print}_gif_regs): Fix encode/decode.
1092 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1094 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1096 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1097 * tic30-dis.c (print_branch): Likewise.
1099 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1100 * dvp-dis.c (dvp_info_mach_type): New function.
1101 (print_insn_dvp): Call it.
1102 (print_vif): Return length of 4 if mpg or direct insn so following
1103 insns get properly disabled.
1104 (print_gif): Fix word order.
1105 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1106 (gif_operands): Fix word order.
1107 (gif_opcodes): Likewise.
1108 ({insert,extract,print}_gif_regs): Likewise.
1109 (gif_regs): Add new register number/name changes.
1110 (dma_opcodes): Add dmarefe insn.
1113 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1115 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1116 saved_symbol code as it is no longer needed.
1118 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1120 * cgen-asm.c: Include symcat.h.
1121 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1123 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1126 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1128 * dvp-opc.c (extra_dma_flags): Fix typos.
1129 (dma_operands): Fix word numbers.
1130 (dma_opcodes): Likewise.
1131 ({insert,extract}_dma_flags): Likewise.
1134 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1136 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1139 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1141 * dvp-dis.c (print_gif): Complete.
1142 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1143 (state_gif_{nregs,regs,nloop}): New static locals.
1144 (*_gif_*): Complete.
1145 (dvp_opcode_init_{parse,print}): Init gif state locals.
1146 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1147 (vif_insn_len): Handle `unpack'.
1148 ({insert,extract}_dma_flags): Complete.
1151 start-sanitize-r5900
1152 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1154 * mips-opc.c (mula.s): Renamed from multa.s.
1157 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1159 * m32r-opc.[ch]: Regenerate.
1162 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1164 * dvp-opc.c (dma_operands): Rewrite.
1165 (dma_operand_{count,addr}): New globals.
1166 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1167 (insert_dma_addr): Insert value into insn.
1168 (extract_dma_addr): Extract value from insn.
1170 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1172 * dvp-dis.c (print_vu): Handle loi insns.
1173 (print_insn): Likewise.
1174 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1175 (vu_operands): Make LDEST1 a FAKE operand.
1176 (parse_dest1): Allow elided argument.
1177 (print_dest1): Don't print the argument.
1179 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1181 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1182 (print_vfreg): Don't print dest spec.
1183 (parse_accdest): Dest spec is optional.
1184 (print_accdest): Don't print dest spec.
1187 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1189 * Makefile.am (CGENFILES): Update.
1190 * Makefile.in: Regenerate.
1191 * cgen-asm.in (insert_normal): Result is error message now.
1192 Validate value to be inserted.
1193 (insert_insn_normal): Result is error message now.
1194 (@arch@_cgen_assemble_insn): Update.
1195 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1196 arguments. Don't perform validation here.
1197 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1199 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1201 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1202 operand instance list.
1203 * m32r-opc.c: Regenerate.
1205 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1207 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1208 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1210 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1212 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1214 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1216 * configure.in: Get the version number from BFD.
1217 * configure: Rebuild.
1219 From H.J. Lu <hjl@gnu.org>:
1220 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1221 * Makefile.in: Rebuild.
1223 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1225 * m32r-opc.c: Regenerate.
1226 * m32r-opc.h: Regenerate.
1228 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1230 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1231 Ignore ALIAS insns if asked to.
1232 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1233 * m32r-opc.c: Regenerate.
1236 * dvp.opc.c: Nicely format opcode tables.
1237 (vu_operands): New element UFLAGS.
1238 (parse_uflags,print_uflags): New functions.
1239 (vu_upper_opcodes): Add UFLAGS to all insns.
1242 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1244 Fix rac to accept only a0:
1245 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1246 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1247 Introduce OPERAND_GPR.
1248 * d10v-dis.c (print_operand): Likewise.
1250 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1252 * cgen-opc.in: New file.
1253 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1254 * Makefile.am (CGENFILES): Add cgen-opc.in.
1255 * Makefile.in: Regenerate.
1257 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1258 (cgen_hw_lookup): Make result const.
1260 * cgen-dis.in (*): Use PTR instead of void *.
1261 (print_insn): Delete unused vars `i', `syntax'.
1263 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1266 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1268 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1269 (vif_opcodes): Update renamed insns.
1270 * dvp-dis.c (*): Likewise.
1273 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1275 * configure, aclocal.m4: Rebuild with new libtool.
1277 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1279 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1280 instructions use a PC relative branch, not absolute.
1282 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1284 * configure.in: Set libtool_enable_shared rather than
1285 libtool_shared. Remove diversion hack.
1286 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1288 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1290 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1291 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1293 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1295 * tic30-dis.c: New file.
1296 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1297 * configure.in: Handle bfd_tic30_arch.
1298 * Makefile.am: Rebuild dependencies.
1299 (CFILES): Add tic30-dis.c
1300 (ALL_MACHINES): Add tic30-dis.lo.
1301 * configure, Makefile.in: Rebuild.
1303 start-sanitize-m32rx
1304 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1306 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1307 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1308 macwhi-a and macwlo-a instructions.
1312 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1314 * dvp-opc.c, fixed encoding of a bunch of instructions to
1315 be consistent with the asmvu assembler (and inconsistent
1316 with the specification).
1318 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1320 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1321 in the opcode table. The pkemscalf instruction must come first.
1323 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1325 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1328 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1330 * m32r-opc.h (HAVE_CPU_M32R): Define.
1333 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1335 * dvp-dis.c, dvp-opc.c: New files.
1336 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1337 * configure: Regenerate.
1338 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1339 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1340 (mips-dis.lo): Compile with @archdefs@.
1341 * Makefile.in: Regenerate.
1342 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1343 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1346 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1348 * v850-opc.c (insertion routines): If both alignment and size is
1349 wrong then report this.
1351 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1353 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1354 Only recognize instructions for the current target_processor.
1356 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1358 * d10v-dis.c (PC_MASK): Correct value.
1359 (print_operand): If there's a reloc, don't calculate the
1360 address because they could be in different sections.
1362 start-sanitize-cygnus
1363 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1365 * cgen.sh: Rewrite to be like simulator's version.
1366 * Makefile.am (cgen): Update call to cgen.sh.
1367 * Makefile.in: Regenerate
1370 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1372 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1373 instruction after the 4650's "mul" instruction; nobody's using the
1374 4010 these days. If object files someday indicate which processor
1375 variant they're intended for, we can do a better job at this.
1377 start-sanitize-r5900
1378 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1380 * mips-opc.c (c.lt.s): Add r5900 variant.
1384 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1386 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1387 table provided entry size. Use CGEN_INSN_MNEMONIC.
1388 (cgen_parse_keyword): Rewrite.
1389 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1390 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1391 * cgen-opc.c: Clean up pass over `struct foo' usage.
1392 (cgen_keyword_lookup_value): Handle "" entry.
1393 (cgen_keyword_add): Likewise.
1394 start-sanitize-cygnus
1395 * Makefile.am: Add cgen support.
1396 * Makefile.in: Regenerate.
1397 * configure.in: Add cgen support.
1398 * configure: Regenerate.
1399 * aclocal.m4: Regenerate.
1400 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1403 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1405 * mips-opc.c: Add FP_D to s.d instruction flags.
1407 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1409 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1411 start-sanitize-tic80
1412 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1414 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1415 PC relative offset forms before the 15 bit forms. An assembler command
1416 line option now chooses the default.
1419 start-sanitize-r5900
1420 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1422 * mips-opc.c: Add many missing r5900 instructions.
1425 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1427 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1428 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1430 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1432 * configure: Only build libopcodes shared if --enable-shared's value
1433 was `yes', or was set to `*opcodes*'.
1434 * aclocal.m4: Likewise.
1435 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1436 original source of this bit of code. It's not clear what the best fix
1439 start-sanitize-r5900
1440 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1442 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1444 start-sanitize-tic80
1445 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1447 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1448 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1449 offset forms before the 15 bit forms, to default to the long forms.
1452 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1454 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1456 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1458 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1459 symbol if none is present.
1460 (print_insn_big_arm): Prevent examination of stored symbol if
1463 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1465 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1467 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1469 * disassemble.c: Remove disasm_symaddr() function.
1471 * arm-dis.c: Use info->symbol instead of info->flags to determine
1472 if disassmbly should be in Thumb or Arm mode.
1474 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1476 * arm-dis.c: Add support for disassembling Thumb opcodes.
1477 (print_insn_thumb): New function.
1479 * disassemble.c (disasm_symaddr): New function.
1481 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1482 (thumb_opcodes): Table of Thumb opcodes.
1484 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1486 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1488 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1489 and 'v' as operand types.
1491 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1493 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1494 <olivier.carmona@di.epfl.ch>.
1495 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1496 which has a two word opcode with a one word argument.
1498 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1500 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1501 unsigned, not signed.
1502 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1504 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1506 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1507 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1508 (ftrv): Slay the cut-and-paste monster.
1510 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1512 * d10v-dis.c (print_operand):
1513 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1515 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1517 * d10v-opc.c (OPERAND_FLAG): Split into:
1518 (OPERAND_FFLAG, OPERAND_CFLAG) .
1522 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1524 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1525 field for all INSN_MACRO's.
1526 * mips16-opc.c: same
1528 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1530 * mips-opc.c (sync,cache): These are 3900 insns.
1532 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1534 sh-opc.h (sh_table): Remove ftst/nan.
1536 start-sanitize-vr5400
1537 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1539 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1540 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1542 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1546 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1548 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1549 Add tx49 insns and configury.
1552 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1554 * mips-opc.c (ffc, ffs): Fix mask.
1556 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1558 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1561 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1563 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1564 start-sanitize-vr5400
1565 Added VR5400 instructions.
1566 (N5): New cpu-id macro.
1568 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1570 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1572 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1573 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1575 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1577 * v850-dis.c (disassemble): Replace // with /* ... */
1579 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1581 * sparc-opc.c: Add wr & rd for v9a asr's.
1582 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1583 (v9a_asr_reg_names): New variable.
1584 Patch from David Miller <davem@vger.rutgers.edu>.
1586 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1588 * sparc-opc.c (v9notv9a): New insn type.
1589 (IMPDEP): Move to the end to not conflict with edge8 et al.
1590 Patch from David Miller <davem@vger.rutgers.edu>.
1592 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1594 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1596 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1598 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1600 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1602 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1603 of disassemble_info structure to determine if an overlay address
1604 has a matching symbol in low memory.
1606 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1607 new symbol_at_address_func field in disassemble_info structure.
1609 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1611 * v850-opc.c (extract_d22): Use signed arithmatic.
1613 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1615 * mips-opc.c: Three op mult is not an ISA insn.
1617 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1619 * mips-opc.c: Fix formatting.
1621 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1623 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1624 than assuming that char is signed. Explicitly sign extend 16 bit
1625 values, rather than assuming that short is 16 bits.
1626 (OP_sI, OP_J, OP_DIR): Likewise.
1628 start-sanitize-v850e
1629 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1631 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1635 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1637 * v850-opc.c: Fix typo in comment.
1639 * v850-dis.c (disassemble): Add test of processor type when
1640 determining opcodes.
1642 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1644 * configure.in: Use a diversion to set enable_shared before the
1645 arguments are parsed.
1646 * configure: Rebuild.
1648 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1650 * m68k-opc.c (TBL1): Use ! rather than `.
1651 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1653 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1655 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1657 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1659 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1662 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1663 * aclocal.m4: Rebuild with new libtool.
1664 * configure: Rebuild.
1666 start-sanitize-v850e
1667 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1669 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1672 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1674 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1676 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1678 * v850-opc.c (v850_opcodes): Further rearrangements.
1680 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1682 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1684 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1686 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1689 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1691 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1693 * mips16-opc.c: Added mips16 sdbbp.
1696 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1698 * v850-opc.c: Initialise processors field of v850_opcode structure.
1700 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1702 Merge changes from Martin Hunt:
1704 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1706 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1707 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1708 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1710 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1712 * d30v-dis.c (print_insn): First operand of d*i (delayed
1713 branch) instructions is relative.
1715 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1716 (d30v_operand_table): Add IMM6S3 type.
1717 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1719 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1720 and cmp instructions.
1722 * d30v-opc.c: Correct entries for repeat*, and sat*.
1723 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1724 types. Correct several formats.
1726 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1728 * d30v-opc.c (pre_defined_registers): Change control registers.
1730 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1731 SHORT_C2. Manual was incorrect.
1733 * d30v-dis.c (lookup_opcode): Return value now indicates
1734 if an opcode has a short and a long form. Used for deciding
1735 to append a ".s" or ".l".
1736 (print_insn): Append a ".s" to an instruction if it is
1737 the short form and ".l" if it is a long form. Do not append
1738 anything if the instruction has only one possible size.
1740 * d30v-opc.c: Change mulx2h to require an even register.
1741 New form: SHORT_A2; a SHORT_A form that needs an even
1742 register as the first operand.
1744 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1745 instruction was not being disassembled if there were an odd
1746 number of instructions.
1748 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1750 start-sanitize-v850e
1751 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1753 * v850-dis.c (disassemble): Improved display of register lists.
1756 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1758 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1759 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1760 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1761 fandnot1s, fandnot2s.
1763 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1765 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1767 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1769 * cgen-asm.c (cgen_parse_address): New argument resultp.
1770 All callers updated.
1771 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1773 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1775 * mn10200-dis.c (disassemble): PC relative instructions are
1776 relative to the next instruction, not the current instruction.
1778 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1780 * v850-dis.c (disassemble): Only signed extend values that are not
1781 returned by extract functions.
1782 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1784 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1786 * v850-opc.c: Update comments. Remove use of
1787 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1789 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1791 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1793 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1795 * configure: Rebuilt with latest devo autoconf for NT support.
1797 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1799 * v850-dis.c (disassemble): Use curly brace syntax for register
1802 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1803 where r0 is being used as a destination register.
1805 start-sanitize-v850e
1806 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1808 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1811 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1813 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1814 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1815 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1816 Add insns to access SGR and DBR.
1817 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1819 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1821 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1823 start-sanitize-v850e
1824 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1826 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1827 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1830 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1832 * configure (cgen_files): Add support for v850e target.
1833 * configure.in (cgen_files): Add support for v850e target.
1835 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1837 * configure (cgen_files): Add support for v850ea target.
1838 * configure.in (cgen_files): Add support for v850ea target.
1841 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1843 * configure.in (bfd_arc_arch): Add.
1844 * configure: Rebuild.
1845 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1846 * Makefile.in: Rebuild.
1847 * arc-dis.c, arc-opc.c: New files.
1848 * disassemble.c (ARCH_all): Define ARCH_arc.
1849 (disassembler): Add ARC support.
1851 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1853 start-sanitize-v850e
1854 * v850-dis.c (disassemble): Add support for v850EA instructions.
1856 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1857 (v850_opcodes): Add v850EA instructions.
1859 * v850-dis.c (disassemble): Add support for v850E instructions.
1861 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1862 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1863 insert_spe, extract_spe): New Functions.
1864 (v850_opcodes): Add v850E instructions.
1867 * v850-opc.c: Reorganised and re-layed out to improve readability
1870 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1872 * configure: Rebuild with autoconf 2.12.1.
1874 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1876 * aclocal.m4, configure: Rebuild with new automake patches.
1878 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1880 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1881 * acinclude.m4: Just include acinclude.m4 from BFD.
1882 * aclocal.m4, configure: Rebuild.
1884 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1886 * Makefile.am: New file, based on old Makefile.in.
1887 * acconfig.h: New file.
1888 * acinclude.m4: New file.
1889 * stamp-h.in: New file.
1890 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1891 Removed shared library handling; now handled by libtool. Replace
1892 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1893 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1894 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1895 handling in AC_OUTPUT.
1896 * dep-in.sed: Change .o to .lo.
1897 * Makefile.in: Now built with automake.
1898 * aclocal.m4: Now built with aclocal.
1899 * config.in, configure: Rebuild.
1901 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1903 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1905 start-sanitize-r5900
1906 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1908 * mips-opc.c: Fix coding of mtsa.
1911 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1913 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1915 * sparc-dis.c (sorted_opcodes): New static local.
1916 (struct opcode_hash): `opcode' is pointer to const element.
1917 (build_hash): First arg is now table of sorted pointers.
1918 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1919 (compare_opcodes): Update.
1921 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1923 * cgen-opc.c: #include <ctype.h>.
1924 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1925 Handle case insensitive hashing.
1926 (hash_keyword_value): Change type of `value' to unsigned int.
1928 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1930 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1931 precision FP, mark it as such. Likewise for double precision
1932 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1934 start-sanitize-r5900
1935 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1938 start-sanitize-r5900
1939 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1941 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1942 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1945 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1947 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1949 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1950 nesting depth when all the macros are expanded.
1952 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1954 * sparc-opc.c: The fcmp v9a instructions take an integer register
1955 as a destination, not a floating point register. From Christian
1956 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1958 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1960 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1961 syntax. From Roman Hodek
1962 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1964 * i386-dis.c (twobyte_has_modrm): Fix pand.
1966 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1968 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1970 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1972 * arm-dis.c: Add prototypes for arm_decode_shift and
1975 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1977 * mips-opc.c: Add r3900 insns.
1979 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1981 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1982 print delay slot instructions on the same line. When using a PC
1983 relative load, add a comment with the value being loaded if it can
1986 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1988 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1989 to pushS/popS for segment regs and byte constant so that
1990 pushw/popw printed when in 16 bit data mode.
1992 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1993 print cbtw, cwtd in 16 bit data mode.
1994 * i386-dis.c (putop): extra case W to support above.
1996 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1997 address size prefix in 16 bit address mode.
1999 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2001 * sh-dis.c: Reindent. Rename local variable fprintf to
2004 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2006 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2008 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2010 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2012 * mips16-opc.c (mip16_opcodes): same.
2014 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2016 * m68k-opc.c (moveb): Change $d to %d.
2018 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2020 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2021 (twobyte_has_modrm): Likewise.
2023 (OP_MMX, OP_EM, OP_MS): New static functions.
2025 * i386-dis.c: Revert patch of April 4. The output now matches
2028 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2030 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2033 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2035 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2037 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2039 * Makefile.in (install): Depend upon installdirs.
2040 (installdirs): New target.
2042 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2044 From Thomas Graichen <graichen@rzpd.de>:
2045 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2046 * configure: Rebuild.
2048 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2050 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2051 Delete string{,s}.h support.
2053 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2055 * cgen-asm.c (cgen_parse_operand_fn): New global.
2056 (cgen_parse_{{,un}signed_integer,address}): Update call to
2057 cgen_parse_operand_fn.
2058 (cgen_init_parse_operand): New function.
2059 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2060 from cgen_asm_init_parse.
2061 (m32r_cgen_assemble_insn): New operand `errmsg'.
2062 Delete call to as_bad, return error message to caller.
2063 (m32r_cgen_asm_hash_keywords): #if 0 out.
2065 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2067 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2069 [case 'J']: Fix typo in register name.
2071 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2073 * configure.in: Substitute SHLIB_LIBS.
2074 * configure: Rebuild.
2075 * Makefile.in (SHLIB_LIBS): New variable.
2076 ($(SHLIB)): Use $(SHLIB_LIBS).
2078 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2080 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2082 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2084 * disassemble.c (disassembler): Handle m32r.
2086 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2088 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2089 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2090 * Makefile.in (CFILES): Add them.
2091 (ALL_MACHINES): Add them.
2092 (dependencies): Regenerate.
2093 * configure.in (cgen_files): New variable.
2094 (bfd_m32r_arch): Add entry.
2095 * configure: Regenerate.
2097 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2099 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2100 * configure: Rebuild.
2102 * Makefile.in: Rebuild dependencies.
2104 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2106 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2109 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2111 * Branched binutils 2.8.
2113 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2115 * m10200-dis.c: Rename from mn10200-dis.c.
2116 * m10200-opc.c: Rename from mn10200-opc.c.
2117 * m10300-dis.c: Rename from mn10300-dis.c
2118 * m10300-opc.c: Rename from mn10300-opc.c.
2119 * Makefile.in: Update accordingly.
2121 * mips16-opc.c: Add mul and dmul macros.
2123 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2125 * makefile.vms: Update CFLAGS, add clean target.
2127 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2129 * mips-opc.c: Add "wait". From Ralf Baechle
2130 <ralf@gnu.ai.mit.edu>.
2132 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2133 * configure, config.in: Rebuild.
2134 * sysdep.h: Include <stdlib.h> if it exists.
2135 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2137 * Makefile.in: Rebuild dependencies.
2139 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2141 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2142 Andrew Bray <andy@madhouse.demon.co.uk>.
2144 * mips-opc.c: Add cast when setting mips_opcodes.
2146 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2148 * v850-dis.c (disassemble): Fix sign extension problem.
2149 * v850-opc.c (extract_d*): Fix sign extension problems to make
2150 disassembly calculate branch offsets correctly.
2152 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2154 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2156 * mips-opc.c: Add dctr and dctw.
2158 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2160 * d30v-dis.c (print_insn): Change the way signed constants
2163 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2165 * Makefile.in (BFD_H): New variable.
2166 (HFILES): New variable.
2167 (CFILES): Add all C files.
2168 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2169 Delete old dependencies, and build new ones.
2170 * dep-in.sed: New file.
2172 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2174 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2176 start-sanitize-coldfire
2177 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2179 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2182 end-sanitize-coldfire
2183 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2185 * mn10200-opc.c: Change "trap" to "syscall".
2186 * mn10300-opc.c: Add new "syscall" instruction.
2188 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2190 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2191 mulul insns on the coldfire.
2193 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2195 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2196 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2197 (print_insn_little_arm): Likewise.
2199 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2201 Based on patches from H.J. Lu <hjl@lucon.org>:
2202 * i386-dis.c (fetch_data): Add prototype.
2203 * m68k-dis.c (fetch_data): Add prototype.
2204 (dummy_print_address): Add prototype. Make static.
2205 * ppc-opc.c (valid_bo): Add prototype.
2206 * sparc-dis.c (build_hash_table): Add prototype.
2207 (is_delayed_branch, compute_arch_mask): Add prototypes.
2208 (print_insn_sparc): Make several local variables const.
2209 (compare_opcodes): Change arguments to const PTR. Add prototype.
2210 * sparc-opc.c (arg): Change name field to be const.
2211 (lookup_name, lookup_value): Add prototypes. Change table and
2212 name parameters to be const.
2213 (sparc_encode_asi): Change name parameter to be const.
2214 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2215 (sparc_encode_sparclet_cpreg): Likewise.
2216 (sparc_decode_asi): Change return type to be const.
2217 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2218 (sparc_decode_sparclet_cpreg): Likewise.
2220 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2222 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2223 Solaris doesn't like the combined options, and the -f is
2225 (stamp-tshlink, install): Likewise.
2227 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2229 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2232 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2234 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2236 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2238 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2241 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2243 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2245 start-sanitize-tic80
2246 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2248 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2250 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2252 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2255 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2257 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2258 floatformat_to_double to make portable.
2259 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2262 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2264 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2265 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2267 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2269 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2270 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2272 start-sanitize-tic80
2273 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2275 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2276 (OFF_SL_BR_SCALED): ... to this, and added the flag
2277 TIC80_OPERAND_BASEREL to the flags word.
2278 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2282 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2284 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2285 Change mips_opcodes from const array to a pointer,
2286 and change bfd_mips_num_opcodes from const int to int,
2287 so that we can increase the size of the mips opcodes table
2290 start-sanitize-tic80
2291 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2293 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2294 store BITNUM values in the table in one's complement form
2295 to match behavior when assembler is given a raw numeric
2296 value for a BITNUM operand.
2297 * tic80-dis.c (print_operand_bitnum): Ditto.
2300 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2302 * d30v-opc.c: Removed references to FLAG_X.
2304 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2306 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2308 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2310 * Makefile.in: Added d30v object files.
2311 * configure: (bfd_d30v_arch) Rebuilt.
2312 * configure.in: (bfd_d30v_arch) Added new case.
2313 * d30v-dis.c: New file.
2314 * d30v-opc.c: New file.
2315 * disassemble.c (disassembler) Add entry for d30v.
2317 start-sanitize-tic80
2318 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2320 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2321 representations for the floating point BITNUM values.
2323 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2325 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2326 in the table in one's complement form, as they appear in the
2328 (tic80_symbol_to_value): Use macros to access predefined
2330 (tic80_value_to_symbol): Ditto.
2331 (tic80_next_predefined_symbol): New function.
2332 * tic80-dis.c (print_operand_bitnum): Remove code that did
2333 one's complement for BITNUM values.
2336 start-sanitize-r5900
2337 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2339 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2342 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2344 * makefile.vms: Remove 8 bit characters. Update to latest
2347 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2349 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2351 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2353 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2354 (IMM24_PCREL): Likewise.
2356 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2358 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2359 address for an extended PC relative instruction that is not a
2362 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2364 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2367 start-sanitize-tic80
2368 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2370 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2371 (tic80_opcodes): Sort entries so that long immediate forms
2372 come after short immediate forms, making it easier for
2373 assembler to select the right one for a given operand.
2376 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2378 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2380 (print_insn_mips16): Likewise.
2382 start-sanitize-r5900
2383 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2385 * mips-opc.c: add r5900.
2388 start-sanitize-tic80
2389 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2391 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2392 a symbol class that restricts translation to just that
2393 class (general register, condition code, etc).
2395 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2397 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2398 and REG_DEST_E for register operands that have to be
2399 an even numbered register. Add REG_FPA for operands that
2400 are one of the floating point accumulator registers.
2401 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2402 (tic80_opcodes): Change entries that need even numbered
2403 register operands to use the new operand table entries.
2404 Add "or" entries that are identical to "or.tt" entries.
2407 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2409 * mips16-opc.c: Add new cases of exit instruction for
2411 * mips-dis.c (print_mips16_insn_arg): Display floating point
2412 registers in operands of exit instruction. Print `$' before
2413 register names in operands of entry and exit instructions.
2415 start-sanitize-tic80
2416 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2418 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2419 pairs for all predefined symbols recognized by the assembler.
2420 Also used by the disassembling routines.
2421 (tic80_symbol_to_value): New function.
2422 (tic80_value_to_symbol): New function.
2423 * tic80-dis.c (print_operand_control_register,
2424 print_operand_condition_code, print_operand_bitnum):
2425 Remove private tables and use tic80_value_to_symbol function.
2428 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2430 * d10v-dis.c (print_operand): Change address printing
2431 to correctly handle PC wrapping. Fixes PR11490.
2433 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2435 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2438 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2440 * mips-dis.c (print_insn_mips16): Set insn_info information.
2441 (print_mips16_insn_arg): Likewise.
2443 * mips-dis.c (print_insn_mips16): Better handling of an extend
2444 opcode followed by an instruction which can not be extended.
2446 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2448 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2449 coldfire moveb instruction to not allow an address register as
2450 destination. Although the documentation does not indicate that
2451 this is invalid, experiments uncovered unexpected behavior.
2452 Added a comment explaining the situation. Thanks to Andreas
2453 Schwab for pointing this out to me.
2455 start-sanitize-tic80
2456 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2458 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2459 entries are presorted so that entries with the same mnemonic are
2460 adjacent to each other in the table. Sort the entries for each
2461 instruction so that this is true.
2464 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2466 * m68k-dis.c: Include <libiberty.h>.
2467 (print_insn_m68k): Sort the opcode table on the most significant
2468 nibble of the opcode.
2470 start-sanitize-tic80
2471 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2473 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2474 "vsub", "vst", "xnor", and "xor" instructions.
2475 (V_a1): Renamed from V_a, msb of accumulator reg number.
2476 (V_a0): Add macro, lsb of accumulator reg number.
2478 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2480 * tic80-dis.c (print_insn_tic80): Broke excessively long
2481 function up into several smaller ones and arranged for
2482 the instruction printing function to be callable recursively
2483 to print vector instructions that have both a load and a
2484 math instruction packed into a single opcode.
2485 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2486 to explain why it comes after the other vector opcodes.
2489 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2491 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2492 move insns to handle immediate operands.
2494 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2496 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2497 fix operand mask in the "moveml" entries for the coldfire.
2499 start-sanitize-tic80
2500 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2502 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2503 New macros for building vector instruction opcodes.
2504 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2505 FMT_LI, which were unused. The field is now a flags field.
2506 Remove some opcodes that are possible, but illegal, such
2507 as long immediate instructions with doubles for immediate
2508 values. Add "vadd" and "vld" instructions.
2510 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2512 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2513 the order more logical. Move the shift alias instructions ("rotl",
2514 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2515 interspersed with the regular sr.x and sl.x instructions. Add
2516 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2517 "sub", "subu", "swcr", and "trap".
2519 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2521 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2522 (OFF_SL_PC): Renamed from OFF_SL.
2523 (OFF_SS_BR): New operand type for base relative operand.
2524 (OFF_SL_BR): New operand type for base relative operand.
2525 (REG_BASE): New operand type for base register operand.
2526 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2527 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2528 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2530 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2531 10 char field, padded with spaces on rhs, rather than a string
2532 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2533 than old TIC80_OPERAND_RELATIVE. Add support for new
2534 TIC80_OPERAND_BASEREL flag bit.
2536 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2538 * tic80-dis.c (print_insn_tic80): Print floating point operands
2540 * tic80-opc.c (SPFI): Add single precision floating point
2541 immediate operand type.
2542 (ROTATE): Add rotate operand type for shifts.
2543 (ENDMASK): Add for shifts.
2544 (n): Macro for the 'n' bit.
2545 (i): Macro for the 'i' bit.
2546 (PD): Macro for the 'PD' field.
2547 (P2): Macro for the 'P2' field.
2548 (P1): Macro for the 'P1' field.
2549 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2553 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2555 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2556 adding in current address for pc-relative operands.
2558 start-sanitize-tic80
2559 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2561 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2562 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2563 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2564 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2565 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2566 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2567 (REG_SCALED, LSI_SCALED): New operand types.
2568 (E): New macro for 'E' bit at bit 27.
2569 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2570 opcodes, including the various size flavors (b,h,w,d) for
2571 the direct load and store instructions.
2573 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2575 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2577 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2578 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2579 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2580 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2581 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2582 masks with "MASK_* & ~M_*" to get the M bit reset.
2583 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2585 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2587 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2588 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2589 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2591 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2592 CC, SICR, and LICR table entries.
2593 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2594 "bcnd", and "brcr" opcodes.
2597 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2599 * ppc-opc.c (powerpc_operands): Make comment match the
2600 actual fields (no shift field).
2601 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2602 start-sanitize-tic80
2603 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2604 partial implementation, work in progress.
2605 * tic80-opc.c (tic80_operands): Begin construction operands table.
2606 (tic80_opcodes): Continue populating opcodes table and start
2607 filling in the operand indices.
2608 (tic80_num_opcodes): Add this.
2611 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2613 * m68k-opc.c: Add #B case for moveq.
2615 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2617 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2618 before they are used.
2620 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2622 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2623 for "breakpoint" instruction.
2625 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2627 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2628 (dep): Use ALL_CFLAGS rather than CFLAGS.
2630 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2632 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2635 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2637 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2638 start-sanitize-tic80
2639 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2642 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2644 * mips16-opc.c: Add "abs".
2646 start-sanitize-tic80
2647 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2649 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2650 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2651 (disassembler): Add bfd_arch_tic80 support to set disassemble
2652 to print_insn_tic80.
2653 * tic80-dis.c (print_insn_tic80): Add stub.
2655 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2657 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2658 * configure: Regenerate with autoconf.
2659 * tic80-dis.c: Add file.
2660 * tic80-opc.c: Add file.
2663 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2665 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2667 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2669 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2670 (mn10200_opcodes): Use it for some logicals and btst insns.
2671 Add "break" and "trap" instructions.
2673 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2675 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2677 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2679 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2680 relative load or add now depends upon whether the instruction is
2683 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2685 * mn10200-dis.c: Finish writing disassembler.
2686 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2687 Fix mask for "jmp (an)".
2689 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2690 handle endianness issues for mn10300.
2692 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2694 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2696 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2697 instruction. Fix opcode field for "movb (imm24),dn".
2699 * mn10200-opc.c (mn10200_operands): Fix insertion position
2702 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2704 * mn10200-opc.c: Create mn10200 opcode table.
2705 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2706 but moving along nicely.
2708 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2710 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2712 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2714 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2715 specifiers for fmovem* instructions.
2717 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2719 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2721 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2723 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2726 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2728 * mn10300-opc.c: Add some comments explaining the various
2731 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2733 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2735 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2738 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2739 operand specifiers in fmovm* instructions.
2741 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2743 * ppc-opc.c (insert_li): Give an error if the offset has the two
2744 least significant bits set.
2746 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2748 * mips-dis.c (print_insn_mips16): Separate the instruction from
2749 the arguments with a tab, not a space.
2751 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2753 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2756 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2759 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2761 * configure: Rebuild with autoconf 2.12.
2763 Add support for mips16 (16 bit MIPS implementation):
2764 * mips16-opc.c: New file.
2765 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2766 (mips16_reg_names): New static array.
2767 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2768 after seeing a 16 bit symbol.
2769 (print_insn_little_mips): Likewise.
2770 (print_insn_mips16): New static function.
2771 (print_mips16_insn_arg): New static function.
2772 * mips-opc.c: Add jalx instruction.
2773 * Makefile.in (mips16-opc.o): New target.
2774 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2775 * configure: Rebuild.
2777 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2779 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2780 operand specifiers in *save, *restore and movem* instructions.
2782 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2785 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2786 register operands for immediate arithmetic, not, neg, negx, and
2787 set according to condition instructions.
2789 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2790 specifier of the effective-address operand in immediate forms of
2791 arithmetic instructions. The specifier for the immediate operand
2792 notes how and where the constant will be stored.
2794 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2796 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2799 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2802 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2804 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2806 * mn10300-dis.c (disassemble): Handle register lists.
2808 * mn10300-opc.c: Fix handling of register list operand for
2809 "call", "ret", and "rets" instructions.
2811 * mn10300-dis.c (disassemble): Print PC-relative and memory
2812 addresses symbolically if possible.
2813 * mn10300-opc.c: Distinguish between absolute memory addresses,
2814 pc-relative offsets & random immediates.
2816 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2818 (disassemble): Handle SPLIT and EXTENDED operands.
2820 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2822 * mn10300-dis.c: Rough cut at printing some operands.
2824 * mn10300-dis.c: Start working on disassembler support.
2825 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2827 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2829 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2831 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2833 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2835 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2837 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2838 register argument is calls and jmp instructions.
2840 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2842 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2843 getx operand. Fix opcode for mulqu imm,dn.
2845 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2847 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2848 in MN10300_OPERAND_SPLIT operands for how many bits
2849 appear in the basic insn word. Add IMM32_HIGH24,
2850 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2851 (mn10300_opcodes): Use new operands as needed.
2853 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2854 for bset, bclr, btst instructions.
2855 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2857 * mn10300-opc.c (mn10300_operands): Remove many redundant
2858 operands. Update opcode table as appropriate.
2859 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2860 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2862 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2864 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2865 operands (for indexed load/stores). Fix bitpos for DI
2866 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2867 few instructions that insert immediates/displacements in the
2868 middle of the instruction. Add IMM8E for 8 bit immediate in
2869 the extended part of an instruction.
2870 (mn10300_operands): Use new opcodes as appropriate.
2872 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2874 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2875 sequential so the assembler never parallelizes it with
2878 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2880 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2881 a data/address register that appears in register field 0
2882 and register field 1.
2883 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2885 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2887 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2888 standard disassembly.
2890 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2891 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2892 Recategorize PALcode instructions.
2894 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2896 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2898 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2900 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2901 there are no operand types.
2903 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2905 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2907 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2909 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2911 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2913 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2915 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2916 and sst.w instructions.
2918 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2921 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2923 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2926 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2928 * ppc-opc.c (PPCPWR2): Define.
2929 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2932 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2934 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2935 field for movhu instruction.
2937 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2938 cast value to "long" not "signed long" to keep hpux10
2941 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2943 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2946 * mn10300-opc.c (FMT*): Remove definitions.
2948 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2949 for shift-by-register opcodes.
2951 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2952 into [AD][MN][01] for encoding the position of the register
2955 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2957 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2958 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2960 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2962 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2963 Fix various typos. Add "PAREN" operand.
2964 (MEM, MEM2): Define.
2965 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2966 operands. Fix several typos.
2968 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2971 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2973 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2974 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2976 (mn10300_opcodes): Break opcode format out into its own field.
2977 Update many operand fields to deal with signed vs unsigned
2978 issues. Fix one or two typos in the "mov" instruction
2979 opcode, mask and/or operand fields.
2981 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2983 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2984 m68851 wasn't reset.
2986 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2988 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2989 all opcodes. Very rough cut at operands for all opcodes.
2991 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2994 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2996 * mn10200-opc.c, mn10300-opc.c: New files.
2997 * mn10200-dis.c, mn10300-dis.c: New files.
2998 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2999 * disassemble.c: Break mn10x00 support into 10200 and 10300
3001 * configure.in: Likewise.
3002 * configure: Rebuilt.
3004 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3006 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3008 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3010 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3012 * disassemble (ARCH_mn10x00): Define.
3013 (disassembler): Handle bfd_arch_mn10x00.
3014 * configure.in: Recognize bfd_mn10x00_arch.
3015 * configure: Rebuilt.
3017 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3019 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3020 accordingly. Don't declare functions using op_rtn.
3022 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3024 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3025 params to be more standard.
3026 * (disassemble): Print absolute addresses and symbolic names for
3027 branch and jump targets.
3028 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3030 * (v850_opcodes): Add breakpoint insn.
3032 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3034 * m68k-opc.c: Move the fmovemx data register cases before the
3035 other cases, so that they get recognized before the data register
3036 does gets treated as a degenerate register list.
3038 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3040 * mips-opc.c: Add a case for "div" and "divu" with two registers
3041 and a destination of $0.
3043 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3045 * mips-dis.c (print_insn_arg): Add prototype.
3046 (_print_insn_mips): Ditto.
3048 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3050 * mips-dis.c (print_insn_arg): Print condition code registers as
3053 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3055 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3057 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3059 * v850-dis.c (disassemble): Make static. Provide prototype.
3061 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3063 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3066 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3068 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3069 ']' characters into the output stream.
3070 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3071 Add "memop" field to all opcodes (for the disassembler).
3072 Reorder opcodes so that "nop" comes before "mov" and "jr"
3073 comes before "jarl".
3075 * v850-dis.c (print_insn_v850): Fix typo in last change.
3077 * v850-dis.c (print_insn_v850): Properly handle disassembling
3078 a two byte insn at the end of a memory region when the memory
3079 region's size is only two byte aligned.
3081 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3083 * v850-dis.c (v850_reg_names): Define.
3084 (v850_sreg_names, v850_cc_names): Likewise.
3085 (disassemble): Very rough cut at printing operands (unformatted).
3087 * v850-opc.c (BOP_MASK): Fix.
3088 (v850_opcodes): Fix mask for jarl and jr.
3090 * v850-dis.c: New file. Skeleton for disassembler support.
3091 * Makefile.in Remove v850 references, they're not needed here.
3092 * configure.in: Add v850-dis.o when building v850 toolchains.
3093 * configure: Rebuilt.
3094 * disassemble.c (disassembler): Call v850 disassembler.
3096 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3097 (insert_d8_6, extract_d8_6): New functions.
3098 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3099 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3101 (IF4A, IF4B): Use "D7" instead of "D7S".
3102 (IF4C, IF4D): Use "D8_7" instead of "D8".
3103 (IF4E, IF4F): New. Use "D8_6".
3104 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3105 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3107 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3108 (v850_operands): Change D16 to D16_15, use special insert/extract
3109 routines. New new D16 that uses the generic insert/extract code.
3110 (IF7A, IF7B): Use D16_15.
3111 (IF7C, IF7D): New. Use D16.
3112 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3114 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3115 message. Issue an error if the branch offset is odd.
3117 * v850-opc.c: Add notes about needing special insert/extract
3118 for all the load/store insns, except "ld.b" and "st.b".
3120 * v850-opc.c (insert_d22, extract_d22): New functions.
3121 (v850_operands): Use insert_d22 and extract_d22 for
3123 (insert_d9): Fix range check.
3125 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3127 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3128 and set bits field to D9 and D22 operands.
3130 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3132 * v850-opc.c (v850_operands): Define SR2 operand.
3133 (v850_opcodes): "ldsr" uses R1,SR2.
3135 * v850-opc.c (v850_opcodes): Fix opcode specs for
3136 sld.w, sst.b, sst.h, sst.w, and nop.
3138 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3140 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3141 end of the opcode table.
3143 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3145 * d10v-opc.c (pre_defined_registers): Added register pairs,
3146 "r0-r1", "r2-r3", etc.
3148 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3150 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3151 Create I16U for an unsigned 16bit mmediate operand.
3152 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3154 * v850-opc.c (v850_operands): Define EP operand.
3155 (IF4A, IF4B, IF4C, IF4D): Use EP.
3157 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3158 with immediate operand, "movhi". Tweak "ldsr".
3160 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3161 correct. Get sld.[bhw] and sst.[bhw] closer.
3163 * v850-opc.c (v850_operands): "not" is a two byte insn
3165 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3167 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3169 * v850-opc.c (two): Get order of words correct.
3171 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3173 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3174 register source and destination operands.
3175 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3177 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3178 same thinko in "trap" opcode.
3180 * v850-opc.c (v850_opcodes): Add initializer for size field
3183 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3184 Add D8 for 8-bit unsigned field in short load/store insns.
3185 (IF4A, IF4D): These both need two registers.
3186 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3187 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3188 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3189 for "ldsr" and "stsr".
3190 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3193 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3194 short store word (sst.w).
3196 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3198 * v850-opc.c (v850_operands): Added insert and extract fields,
3199 pointers to functions that handle unusual operand encodings.
3201 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3203 * v850-opc.c (v850_opcodes): Enable "trap".
3205 * v850-opc.c (v850_opcodes): Fix order of displacement
3206 and register for "set1", "clr1", "not1", and "tst1".
3208 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3210 * v850-opc.c (v850_operands): Add "B3" support.
3211 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3214 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3216 * v850-opc.c: Close unterminated comment.
3218 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3220 * v850-opc.c (v850_operands): Add flags field.
3221 (v850_opcodes): add move opcodes.
3223 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3225 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3226 * configure: (bfd_v850v_arch) Add new case.
3227 * configure.in: (bfd_v850_arch) Add new case.
3228 * v850-opc.c: New file.
3230 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3232 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3234 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3236 * d10v-opc.c: Add additional information to the opcode
3237 table to help determinine which instructions can be done
3240 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3242 * mpw-make.sed: Update editing of include pathnames to be
3245 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3247 * arm-opc.h: Added "bx" instruction definition.
3249 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3251 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3253 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3255 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3257 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3259 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3261 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3263 * makefile.vms: Update for alpha-opc changes.
3265 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3267 * i386-dis.c (print_insn_i386): Actually return the correct value.
3268 (ONE, OP_ONE): #ifdef out; not used.
3270 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3272 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3273 Changed subi operand type to treat 0 as 16.
3275 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3277 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3280 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3282 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3283 memory transfer instructions. Add new format string entries %h and %s.
3284 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3287 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3289 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3290 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3292 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3294 * alpha-dis.c (print_insn_alpha_osf): Remove.
3295 (print_insn_alpha_vms): Remove.
3296 (print_insn_alpha): Make globally visible. Chose the register
3297 names based on info->flavour.
3298 * disassemble.c: Always return print_insn_alpha for the alpha.
3300 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3302 * d10v-dis.c (dis_long): Handle unknown opcodes.
3304 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3306 * d10v-opc.c: Changes to support signed and unsigned numbers.
3307 All instructions with the same name that have long and short forms
3308 now end in ".l" or ".s". Divs added.
3309 * d10v-dis.c: Changes to support signed and unsigned numbers.
3311 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3313 * d10v-dis.c: Change all functions to use info->print_address_func.
3315 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3317 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3318 move ccr/sr insns more strict so that the disassembler only
3319 selects them when the addressing mode is data register.
3321 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3322 * d10v-opc.c (pre_defined_registers): Declare.
3323 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3324 to pick a better name for the registers.
3326 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3328 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3329 operands for fexpand and fpmerge. From Christian Kuehnke
3330 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3332 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3334 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3335 print routine. Take new regnames and cpumask arguments.
3336 Kill the environment variable nonsense.
3337 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3338 (print_insn_alpha_vms): New function. Do VMS style regnames.
3339 * disassemble.c (disassembler): Test bfd flavour to pick
3340 between OSF and VMS routines. Default to OSF.
3342 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3344 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3345 * configure: Rebuild.
3346 * Makefile.in (install): Use @INSTALL_SHLIB@.
3348 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3350 * configure: (bfd_d10v_arch) Add new case.
3351 * configure.in: (bfd_d10v_arch) Add new case.
3352 * d10v-dis.c: New file.
3353 * d10v-opc.c: New file.
3354 * disassemble.c (disassembler) Add entry for d10v.
3356 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3358 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3359 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3361 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3363 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3364 distinguish between variants of the instruction set.
3365 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3366 distinguish between variants of the instruction set.
3368 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3370 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3371 the 8086 instruction set.
3372 * i386-dis.c: General cleanups. Make most things static. Add
3373 prototypes. Get rid of static variables aflags and dflags. Pass
3374 them as args (to almost everything).
3376 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3378 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3380 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3382 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3383 if the next arg is marked with SRC_IN_DST. Gross.
3385 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3386 we're looking for and find EXR.
3388 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3389 if we're looking for KBIT and we don't find it.
3391 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3394 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3395 3bit immediate operands.
3397 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3399 * Released binutils 2.7.
3401 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3402 <kkaempf@progis.ac-net.de>.
3404 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3406 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3408 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3410 * sparc-dis.c (print_insn_sparclite): New routine to print
3411 sparclite instructions.
3413 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3415 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3417 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3419 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3420 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3421 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3423 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3425 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3426 Use autoconf-set values.
3427 (docdir, oldincludedir): Removed.
3428 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3430 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3432 * alpha-opc.c: New file.
3433 * alpha-opc.h: Remove.
3434 * alpha-dis.c: Complete rewrite to use new opcode table.
3435 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3436 * configure: Rebuild with autoconf 2.10.
3437 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3438 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3440 (alpha-opc.o): New target.
3442 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3444 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3445 Set imm_added_to_rs1 even if the source and destination register
3448 * sparc-opc.c: Add some two operand forms of the wr instruction.
3450 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3452 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3455 * disassemble.c (disassembler): Handle H8/S.
3456 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3458 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3460 * sparc-opc.c: Add beq/teq as aliases for be/te.
3462 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3463 <sergei@msil.sps.mot.com>.
3465 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3467 * makefile.vms: New file.
3469 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3471 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3473 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3476 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3478 * i386-dis.c (OP_OFF): Call append_prefix.
3480 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3482 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3483 unsigned long to silence a warning from the Solaris PowerPC
3486 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3488 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3490 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3492 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3494 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3495 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3496 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3497 cpush, cpusha, cpull sparclet insns.
3499 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3501 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3503 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3505 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3506 Set F_FLOAT on other floating point instructions.
3508 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3510 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3512 (powerpc_opcodes): Add 860/821 specific SPRs.
3514 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3516 * configure.in: Permit --enable-shared to specify a list of
3517 directories. Set and substitute BFD_PICLIST.
3518 * configure: Rebuild.
3519 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3520 uses. Set to @BFD_PICLIST@.
3522 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3524 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3525 not "abs", which may be needed for the absolute in something
3526 like btst #0,@10:8. Print L_3 immediates separately from other
3527 immediates. Change ABSMOV reference to ABS8MEM.
3529 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3531 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3532 (current_arch_mask): New static global.
3533 (compute_arch_mask): New static function.
3534 (print_insn_sparc): Delete sparc_v9_p. New static local
3535 current_mach. Resort opcode table if current_mach changes.
3536 Generalize "insn not supported" test.
3537 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3538 Delete test for v9/!v9.
3539 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3541 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3542 (brfcx): Renamed to FBRX.
3543 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3544 coprocessor mnemonics are not supported on the sparclet).
3545 (condf): Renamed to CONDF.
3546 (SLCBCC2): Delete F_ALIAS flag.
3548 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3550 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3551 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3553 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3555 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3556 that the shared library version number is set correctly.
3558 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3560 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3561 Miles Bader <miles@gnu.ai.mit.edu>.
3562 * configure: Rebuild.
3564 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3566 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3569 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3571 * configure: Rebuild with autoconf 2.8.
3573 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3575 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3576 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3578 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3580 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3581 since they appear as targets in Makefile.in.
3582 * configure: Rebuild.
3584 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3586 * mpw-make.sed: Edit out shared library support bits.
3588 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3590 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3591 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3592 (sparc_opcodes): Add sparclet insns.
3593 (sparclet_cpreg_table): New static local.
3594 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3595 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3597 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3599 * i386-dis.c (index16): New static variable.
3600 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3602 (OP_indirE): Return result of OP_E.
3603 (OP_E): Check for 16 bit addressing mode, and disassemble
3604 correctly. Optimised 32 bit case a little. Don't print
3605 "(base,index,scale)" when sib specifies only an offset.
3607 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3609 * configure.in: Set and substitute SHLIB_DEP.
3610 * configure: Rebuild.
3611 * Makefile.in (SHLIB_DEP): New variable.
3612 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3613 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3614 COMMON_SHLIB, add them to piclist with appropriate modifications.
3615 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3616 here: just use piclist.
3618 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3620 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3621 (print_insn_sparc): Rewrite v9/not-v9 tests.
3622 (compare_opcodes): Likewise.
3623 * sparc-opc.c (MASK_<ARCH>): Define.
3624 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3625 (sparclet,v6notv9): Define.
3626 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3627 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3629 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3631 * configure.in: Call AC_PROG_CC before configure.host.
3632 * configure: Rebuild.
3634 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3636 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3638 * i386-dis.c (onebyte_has_modrm): New static array.
3639 (twobyte_has_modrm): New static array.
3640 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3642 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3644 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3647 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3649 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3652 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3654 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3655 m68010up, not just m68020up | cpu32.
3657 * Makefile.in (SONAME): New variable.
3658 ($(SHLINK)): Make a link to the transformed name, as well.
3659 (stamp-tshlink): New target.
3660 (install): Skip stamp-tshlink during install.
3662 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3664 * configure.in: Call AC_ARG_PROGRAM.
3665 * configure: Rebuild.
3666 * Makefile.in (program_transform_name): New variable.
3667 (install): Transform library name before installing it.
3669 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3671 * i960-dis.c (mem): Add HX dcinva instruction.
3673 Support for building as a shared library, based on patches from
3674 Alan Modra <alan@spri.levels.unisa.edu.au>:
3675 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3676 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3677 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3678 * configure: Rebuild.
3679 * Makefile.in (ALLLIBS): New variable.
3680 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3681 (COMMON_SHLIB, SHLINK): New variables.
3682 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3683 (STAGESTUFF): Remove variable.
3684 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3685 (stamp-piclist, piclist): New targets.
3686 ($(SHLIB), $(SHLINK)): New targets.
3687 ($(OFILES)): Depend upon stamp-picdir.
3688 (disassemble.o): Build twice if PICFLAG is set.
3689 (MOSTLYCLEAN): Add pic/*.o.
3690 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3691 (distclean): Remove pic and stamp-picdir.
3692 (install): Install shared libraries.
3693 (stamp-picdir): New target.
3695 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3697 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3698 Print unknown instruction as "unknown", rather than in hex.
3700 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3702 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3704 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3706 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3708 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3710 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3711 when necessary. From Ulrich Drepper
3712 <drepper@myware.rz.uni-karlsruhe.de>.
3714 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3716 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3717 sparc_num_opcodes. Update architecture enum values.
3718 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3719 (sparc_opcode_lookup_arch): New function.
3720 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3721 (sparc_opcodes): Add v9a shutdown insn.
3723 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3725 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3726 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3728 (print_insn_sparc64): Deleted.
3729 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3732 * sparc-opc.c (architecture_pname): Add v9a.
3734 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3736 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3737 incorrectly defined as 0x16 when it should be 0x15.
3738 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3739 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3740 excb (exception barrier) which is defined in the Alpha
3741 Architecture Handbook version 2.
3742 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3743 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3744 disassembled as or, for example.
3746 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3748 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3749 (_print_insn_mips): Change i from int to unsigned int.
3751 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3753 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3754 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3756 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3758 * i386-dis.c: Added Pentium Pro instructions.
3760 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3762 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3765 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3767 * sh-opc.h (sh_nibble_type): Added REG_B.
3768 (sh_arg_type): Added A_REG_B.
3769 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3771 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3773 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3775 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3777 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3779 * Makefile.in (distclean): Remove stamp-h. From Ronald
3780 F. Guilmette <rfg@monkeys.com>.
3782 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3784 From David Mosberger-Tang <davidm@azstarnet.com>:
3785 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3788 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3790 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3791 (sh_table): Added many SH3 opcodes.
3792 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3794 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3796 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3797 (subco,subco.): Mark this PPC, not PPCCOM.
3799 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3801 * configure: Rebuild with autoconf 2.7.
3803 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3805 * configure: Rebuild with autoconf 2.6.
3807 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3809 * configure.in: Sort list of architectures. Accept but do nothing
3810 for alliant, convex, pyramid, romp, and tahoe.
3812 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3814 * a29k-dis.c (print_special): Change num to unsigned int.
3816 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3818 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3821 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3823 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3824 * configure: Rebuilt.
3826 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3828 * configure.in: Add case for bfd_i860_arch.
3829 * configure: Rebuild.
3831 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3833 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3834 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3835 (NEXTDOUBLE): Likewise.
3836 (print_insn_m68k): Don't match fmoveml if there is more than one
3837 register in the list.
3838 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3840 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3842 * m68k-opc.c: Use #W rather than #w.
3843 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3845 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3847 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3848 and likewise for all the dbxx opcodes.
3850 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3852 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3854 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3856 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3857 the VR4100 specific instructions to the mips_opcodes structure.
3859 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3861 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3862 ugly Metrowerks bug in CW6, is fixed in CW7.
3864 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3866 * ppc-opc.c (whole file): Add flags for common/any support.
3868 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3870 * Makefile.in (BISON): Remove macro.
3871 (FLAGS_TO_PASS): Remove BISON.
3873 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3875 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3877 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3878 instructions that take no args by looking at the match mask.
3879 (print_insn_arg): Always print "%" before register names.
3880 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3881 [case '_']: Don't print "@#" before address.
3882 [case 'J']: Use "%s" as format string, not register name.
3883 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3885 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3887 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3890 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3892 From David Mosberger-Tang <davidm@azstarnet.com>
3894 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3895 (alpha_insn_set): added definitions for VAX floating point
3896 instructions (Unix compilers don't generate these, but handcoded
3897 assembly might still use them).
3899 * alpha-dis.c (print_insn_alpha): added support for disassembling
3900 the miscellaneous instructions in the Alpha instruction set.
3902 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3904 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3905 no longer create sysdep.h, sed ppc-opc.c to work around a
3906 serious Metrowerks C bug.
3907 * mpw-make.in: Remove.
3908 * mpw-make.sed: New file, used by mpw-configure to edit
3909 Makefile.in into an MPW makefile.
3911 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3913 * Makefile.in (maintainer-clean): New synonym for realclean.
3915 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3917 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3918 which use '0', '1', and '2' instead. Specify the proper size for
3919 a pmove immediate operand. Correct the pmovefd patterns to be
3920 moves to a register, not from a register.
3921 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3923 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3925 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3926 %psr, %wim, %tbr as F_NOTV9.
3928 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3930 * Makefile.in (Makefile): Just rebuild Makefile when running
3932 (config.h, stamp-h): New targets.
3933 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3934 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3935 rebuilding config.h.
3936 * configure: Rebuild.
3938 * mips-opc.c: Change unaligned loads and stores with "t,A"
3939 operands to use "t,A(b)".
3941 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3943 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3945 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3947 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3948 until 3 instead of until 2.
3950 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3952 * Makefile.in (ALL_CFLAGS): Define.
3953 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3954 (MOSTLYCLEAN): Add config.log.
3955 (distclean): Don't remove config.log.
3956 * configure.in: Substitute HDEFINES.
3957 * configure: Rebuild.
3959 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3961 * sh-opc.h (sh_arg_type): Add F_FR0.
3962 (sh_table, case fmac): Add F_FR0 as first argument.
3964 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3966 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3968 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3970 * sparc-dis.c: Remove all references to NO_V9.
3972 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3974 * aclocal.m4: Just include ../bfd/aclocal.m4.
3975 * configure: Rebuild.
3977 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3979 * sparc-dis.c (X_DISP19): Define.
3980 (print_insn, case 'G'): Use it.
3981 (print_insn, case 'L'): Sign extend displacement.
3983 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3985 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3986 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3987 host_makefile_frag or frags.
3988 * aclocal.m4: New file.
3989 * configure: Rebuild.
3990 * Makefile.in (INSTALL): Set to @INSTALL@.
3991 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3992 (INSTALL_DATA): Set to @INSTALL_DATA@.
3994 (AR_FLAGS): Set to rc rather than qc.
3995 (CC): Define as @CC@.
3996 (CFLAGS): Set to @CFLAGS@.
3997 (@host_makefile_frag@): Remove.
3998 (config.status): Remove dependency upon @frags@.
4000 * configure.in: ../bfd/config.bfd now just sets shell variables.
4001 Use them rather than looking through target Makefile fragments.
4002 * configure: Rebuild.
4004 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4006 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4008 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4010 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4011 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4014 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4015 (lookup_{name,value}): New functions.
4016 (prefetch_table): New static local.
4017 (sparc_{encode,decode}_prefetch): New functions.
4018 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4020 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4022 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4025 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4027 * sh-dis.c: Correct comment on first line of file.
4029 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4031 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4033 * sparc-opc.c (asi, membar): New static locals.
4034 (sparc_{encode,decode}_{asi,membar}): New functions.
4035 (sparc_opcodes, membar insn): Fix.
4036 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4037 Support decoding of membar masks.
4040 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4042 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4044 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4046 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4047 and likewise for the other branches. Add bhs as an alias for bcc,
4048 and likewise for the size variants. Add dbhs as an alias for
4051 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4053 * sh-opc.h (FP sts instructions): Update to match reality.
4055 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4057 * m68k-dis.c: (fpcr_names): Add % before all register names.
4058 (reg_names): Likewise.
4059 (print_insn_arg): Don't explicitly print % before register names.
4060 Add % before register names in static array names. In case 'r',
4061 print data registers as `@(Dn)', not `Dn@'. When printing a
4062 memory address, don't print @# before it.
4063 (print_indexed): Change base_disp and outer_disp from int to
4064 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4065 syntax. Sign extend 8 byte displacement correctly.
4066 (print_base): Print using MIT syntax. Print zpc when appropriate.
4067 Change parameter disp from int to bfd_vma.
4069 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4072 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4074 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4075 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4076 * sh-opc.h (sh_arg_type): Add new operand types.
4077 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4079 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4081 * Makefile.in (distclean): Remove generated file config.h.
4083 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4085 * Makefile.in (distclean): Remove generated file config.h.
4087 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4089 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4091 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4093 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4094 rather than numopcodes. Use m68k_opcodes rather than removed
4095 opcode function. Don't check F_ALIAS.
4096 (print_insn_arg): Change first parameter to be const char *.
4097 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4098 (m68k-opc.o): New target.
4099 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4100 * configure: Rebuild.
4102 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4104 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4105 (opcode_bits, opcode_hash_table): New variables.
4106 (opcodes_initialized): Renamed from opcodes_sorted.
4107 (build_hash_table): New function.
4108 (is_delayed_branch): Use hash table.
4109 (print_insn): Renamed from print_insn_sparc, made static.
4110 Build and use hash table. If !sparc64, ignore sparc64 insns,
4111 and vice-versa if sparc64.
4112 (print_insn_sparc, print_insn_sparc64): New functions.
4113 (compare_opcodes): Move sparc64 opcodes to end.
4114 Print commutative insns with constant second.
4115 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4117 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4119 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4120 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4121 avoids printing a delay slot in a delay slot.
4122 * sh-opc.h (sh_table): Fully bracket last entry.
4124 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4126 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4128 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4130 * configure.in: Get host_makefile_frag from ${srcdir}.
4132 * configure.in: Autoconfiscated. Check for string[s].h. Create
4133 config.h from config.in. Don't set up sysdep.h link.
4134 * sysdep.h: New file.
4135 * configure, config.in: New files, generated from configure.in.
4136 * Makefile.in: Updated to be processed autoconf-style.
4137 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4138 (Makefile): Depend on config.status.
4139 (config.status): New rule.
4140 * configure.bat: Update Makefile substitutions.
4142 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4144 * mips-opc.c (L1): Define.
4145 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4146 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4149 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4151 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4152 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4153 have multiple add units but only a single logical unit.
4155 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4156 shifted by 18, without any insertion or extraction function.
4157 (insert_cr, extract_cr): Remove.
4159 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4161 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4164 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4166 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4167 * sh-opc.h: Add copyright.
4169 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4171 * Makefile.in (crunch-m68k): Delete extra target accidentally
4172 checked in a while ago.
4174 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4176 * sh-opc.h (sh_table): Add SH3 support.
4178 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4180 * sh-opc.h: Added bsrf and braf.
4182 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4184 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4185 bogus [ls]fm{ea,fd} patterns.
4187 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4188 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4189 initialize it from memory. Make function static.
4190 (print_insn_{big,little}_arm): New functions.
4191 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4192 the correct endianness.
4194 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4196 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4199 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4201 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4202 17th, so that it builds again using GCC as the compiler.
4204 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4206 * mips-dis.c (print_insn_little_mips): Cast return value from
4207 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4208 expects an unsigned long, and that might be fewer words of
4209 argument storage (e.g., if bfd_vma is long long on a 32-bit
4211 (print_insn_big_mips): Likewise with bfd_getb32 value.
4212 (_print_insn_mips): Now static.
4214 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4216 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4217 gcc memory hog problem with initializer is fixed.
4219 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4221 Merge in support for Mac MPW as a host.
4222 (Old change descriptions retained for informational value.)
4224 * mpw-config.in (archname): Compute from the config.
4225 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4227 * mpw-config.in (target_arch): Compute from canonical target.
4228 (m68k, mips, powerpc, sparc): Add architectures.
4229 * mpw-make.in (disassemble.c.o): Add.
4230 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4232 * mpw-config.in (BFD_MACHINES): Set to a default value.
4233 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4235 * mpw-make.in (CSEARCH): Add extra-include to search path.
4237 * mpw-config.in (varargs.h): Don't create.
4238 (sysdep.h): Create using forward-include.
4239 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4241 * mpw-config.in: New file, MPW version of configure.in.
4242 * mpw-make.in: New file, MPW version of Makefile.in.
4244 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4246 * alpha-dis.c (print_insn_alpha): Put empty statement after
4249 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4251 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4252 (low_sign_extend): Likewise.
4253 (get_field): Delete unused function.
4254 (set_field, deposit_14, deposit_21): Likewise.
4256 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4258 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4261 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4263 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4265 * alpha-opc.h (OSF_ASMCODE): define
4266 print pal-code names as defined in App C of the
4267 Alpha Architecture Reference Manual
4269 * alpha-dis.c: cleaned up output
4270 print stylized code forms as defined in App A.4.3 of the
4271 Alpha Architecture Reference Manual
4273 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4275 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4277 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4280 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4282 * m68k-dis.c (opcode): New function. Returns address of opcode
4283 table entry given index, even if the opcode table was split to
4284 work around gcc bugs.
4285 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4287 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4288 (reg_names): Now const.
4289 (print_insn_arg): Arrays cacheFieldName and names now const.
4290 (print_indexed): Array scales now const.
4292 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4294 * ppc-opc.c: Sort recently added instructions by minor opcode
4295 number within major opcode number.
4297 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4299 * hppa-dis.c: Include libhppa.h.
4301 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4303 * mips-opc.c: Change dli to use M_DLI, and add dla.
4305 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4307 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4309 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4311 * mips-opc.c: Add r4650 mul instruction.
4313 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4315 * mips-opc.c: Add uld and usd macros for unaligned double load and
4318 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4320 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4321 mfdcr, mtdcr, icbt, iccci.
4323 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4325 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4326 signed char fields to shorts, more portable.
4328 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4330 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4331 char fields as signed chars, since they may have negative values.
4333 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4335 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4336 (mycroft@netbsd.org).
4338 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4340 From "Logg, Ed" <elogg@ea.com>:
4341 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4342 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4345 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4347 * ppc-opc.c: Changes based on patch from David Edelsohn
4348 <edelsohn@mhpcc.edu>.
4349 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4352 (insert_tbr): New static function.
4353 (extract_tbr): New static function.
4354 (XFXFXM_MASK, XFXM): Define.
4355 (XSPRBAT_MASK, XSPRG_MASK): Define.
4356 (powerpc_opcodes): Add instructions to access special registers by
4357 name. Add mtcr and mftbu.
4359 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4361 * mips-opc.c (P3): Define.
4362 (mips_opcodes): Add mad and madu.
4364 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4366 * configure.in: Add W65 support.
4367 * disassemble.c: Likewise.
4368 * w65-opc.h, w65-dis.c: New files.
4370 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4372 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4375 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4377 * mips-opc.c: Add dli as a synonym for li.
4379 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4381 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4382 print something for reserved opcode values, even if it won't
4385 * mips-dis.c (_print_insn_mips): When initializing, shift right
4386 and mask, to avoid sign extension problems on the Alpha.
4388 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4391 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4393 * sh-opc.h (mov.l gbr): Get direction right.
4394 * sh-dis.c (print_insn_shx): New function.
4395 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4396 print opcodes with right byte order.
4398 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4400 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4401 to avoid conflicts with getopt.
4403 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4405 * hppa-dis.c (print_insn_hppa): Read the instruction using
4406 bfd_getb32, so that it works on a little endian or 64 bit host.
4407 Remove unused local variable op.
4409 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4411 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4412 addu does not work correctly if -mips3.
4414 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4416 * a29k-dis.c (print_special): Add special register names defined
4417 on 29030, 29040 and 29050.
4418 (print_insn): Handle new operand type 'I'.
4420 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4422 * Makefile.in (INSTALL): Use top level install.sh script.
4424 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4426 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4427 that it works on a little endian host.
4429 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4431 * configure.in: Use ${config_shell} when running config.bfd.
4433 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4435 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4437 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4439 * a29k-dis.c (print_insn): Print the opcode.
4441 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4443 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4445 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4447 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4449 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4451 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4452 which store a value into memory.
4454 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4456 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4457 * arm-dis.c, arm-opc.h: New files.
4459 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4461 * Makefile.in (ns32k-dis.o): Add dependency.
4462 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4463 string, not as array of chars.
4465 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4467 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4469 * sparc-opc.c: Added sparclite extended FP operations, and
4470 versions of v9 impdep* instructions permitting specification of
4473 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4475 * i960-dis.c (reg_names): Now const.
4476 (struct sparse_tabent): New type, copied from array type in mem
4478 (ctrl): Local static array ctrl_tab now const.
4479 (cobr): Local static array cobr_tab now const.
4480 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4481 static variable mem_tab no longer explicitly initialized. Changed
4482 mem_init to const array of struct sparse_tabent.
4483 (reg): Local static variable reg_tab no longer explicitly
4484 initialized. Changed reg_init to const array of struct
4486 (ea): Local static array scale_tab now const.
4488 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4491 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4493 * configure.bat: the disassember needs to be enabled for
4494 "objdump -d" to work in djgpp.
4496 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4498 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4499 (invalid_float): Enabled general version, doesn't require running
4500 on ns32k host. Changed to take char* argument, and test for
4501 explicitly specified sizes, instead of using sizeof() on host CPU
4503 (INVALID_FLOAT): Cast first argument.
4504 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4505 list_P032, list_M032): Now const.
4506 (optlist, list_search): Made appropriate arguments now point to
4508 (print_insn_arg): Changed static array of one-character-string
4509 pointers into a static const array of characters; fixed sprintf
4510 statement accordingly.
4512 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4514 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4515 from distribution. A ns32k-dis.c from a previous distribution has
4516 been brought up to date and supports the new interface.
4518 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4520 * configure.in: add bfd_ns32k_arch target support.
4522 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4523 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4525 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4527 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4530 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4532 * h8300-dis.c, mips-dis.c: Don't use true and false.
4534 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4536 * configure.in: Change --with-targets to --enable-targets.
4538 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4540 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4541 opcodes to the first instruction with that opcode, to speed
4542 disassembly of large files. From ralphc@pyramid.com (Ralph
4545 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4547 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4549 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4551 * configure.bat: update to latest makefile.in
4553 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4555 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4556 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4557 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4558 slot insn is in a delay slot.
4559 * z8k-opc.h: (resflg): Fix patterns.
4560 * h8500-opc.h Fix CR insn patterns.
4562 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4564 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4565 "cmpl" before POWER versions, so that gas -many uses them.
4567 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4569 * disassemble.c: New file.
4570 * Makefile.in (OFILES): Add disassemble.o.
4571 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4572 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4573 binutils/configure.in.
4575 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4576 opcode being examined.
4578 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4580 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4581 (insert_ral, insert_ram, insert_ras): New functions.
4582 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4583 RAS for store with update.
4585 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4587 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4588 (edelsohn@npac.syr.edu).
4590 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4592 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4595 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4597 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4599 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4601 * ppc-opc.c (powerpc_operands): The signedp field has been
4602 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4603 instead. Add new operand SISIGNOPT.
4604 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4605 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4606 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4609 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4611 * i386-dis.c (struct private): Renamed to dis_private. `private'
4612 is a reserved word for dynix cc.
4614 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4616 * configure.in: Change error message to refer to bfd/config.bfd
4617 rather than bfd/configure.in.
4619 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4621 * ppc-opc.c: Define POWER2 as short alias flag.
4622 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4625 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4627 * i960-dis.c (print_insn_i960): Don't read a second word for
4628 opcodes 0, 1, 2 and 3.
4630 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4632 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4634 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4636 * m68881-ext.c: Removed; no longer used.
4637 * Makefile.in: Changed accordingly.
4639 * m68k-dis.c (ext_format_68881): Don't declare.
4640 (print_insn_m68k): If an instruction uses place 'i', it uses at
4641 least four fixed bytes.
4642 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4643 extended float, convert to double using floatformat_to_double, not
4644 ieee_extended_to_double, and fetch the data before converting it.
4646 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4648 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4649 davidj@ICSI.Berkeley.EDU (David Johnson).
4651 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4653 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4654 PowerPC uses bdnz[l][a].
4656 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4658 * dis-buf.c, i386-dis.c: Include sysdep.h.
4660 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4662 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4664 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4665 by Motorola PowerPC 601 with PPC_OPCODE_601.
4666 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4667 Disassemble Motorola PowerPC 601 instructions as well as normal
4668 PowerPC instructions.
4670 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4672 * i960-dis.c (reg, mem): Just use a static array instead of
4675 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4677 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4678 condition name index if this is for a negated condition.
4680 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4681 Floating point format for 'H' operand is backwards from normal
4682 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4683 operands (fmpyadd and fmpysub), handle bizarre register
4684 translation correctly for single precision format.
4686 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4687 or 'I' operands if the next format specifier is 'M' (fcmp
4688 condition completer).
4690 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4692 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4693 single number giving a bitmask for the MB and ME fields of an M
4694 form instruction. Change NB to accept 32, and turn it into 0;
4695 also turn 0 into 32 when disassembling. Seperated SH from NB.
4696 (insert_mbe, extract_mbe): New functions.
4697 (insert_nb, extract_nb): New functions.
4698 (SC_MASK): Mask out SA and LK bits.
4699 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4700 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4701 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4702 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4703 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4704 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4705 (powerpc_macros): Define table of macro definitions.
4706 (powerpc_num_macros): Define.
4708 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4709 if PPC_OPERAND_NEXT is set.
4711 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4713 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4714 char. Retrieve contents using bfd_getl32 instead of shifting.
4716 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4718 * ppc-opc.c: New file. Opcode table for PowerPC, including
4719 opcodes for POWER (RS/6000).
4720 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4721 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4722 (CFILES): Add ppc-dis.c.
4723 (ppc-dis.o, ppc-opc.o): New targets.
4724 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4726 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4728 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4729 No space before 'u', 'f', or 'N'.
4731 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4733 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4734 farther than we should.
4736 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4738 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4740 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4742 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4744 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4745 needs it, to prevent reading past the end of a section.
4747 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4749 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4750 Removed t,A case for la; always use t,A(b) case.
4752 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4754 From Ted Lemen <mellon@pepper.ncd.com>
4755 * mips-dis.c (print_insn_arg): Handle 'k'.
4756 * mips-opc.c: Make cache use k, not t.
4758 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4760 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4761 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4762 FLOAT_FORMAT_CODE to put out floating point register names.
4764 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4766 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4768 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4770 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4772 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4774 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4775 larger than 32. Moved dsxx32 variants first for disassembler.
4777 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4779 * z8kgen.c, z8k-opc.h: Add full lda information.
4781 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4783 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4784 movb instructions. Any necessary space will be emitted by
4785 the code to handle nullification completers.
4787 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4789 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4791 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4793 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4794 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4796 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4798 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4800 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4802 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4803 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4805 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4807 * m88k-dis.c (m88kdis): comment change. Remove space after
4809 (printop): handle new arg types DEC and XREG for m88110.
4811 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4813 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4814 type for absolute branch addresses. Delete special
4815 "ble" and "be" code in 'W' operand code.
4817 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4819 * mips-opc.c: Set hazard information correctly for branch
4820 likely instructions.
4822 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4824 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4825 info->fprintf_func for printing and info->print_address_func for
4828 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4832 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4834 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4835 Corrected second case of "b" for disassembler.
4837 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4839 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4840 to BFD swapping routines to correspond to BFD name changes.
4842 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4844 * mips-opc.c: Change div machine instruction to be z,s,t rather
4845 than s,t. Change div macro to be d,v,t rather than d,s,t.
4846 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4847 rem and remu which generates only the corresponding div
4848 instruction. This is for compatibility with the MIPS assembler,
4849 which only generates the simple machine instruction when an
4850 explicit destination of $0 is used.
4851 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4853 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4855 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4856 WR_31 hazard for bal, bgezal, bltzal.
4858 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4860 * hppa-dis.c (print_insn_hppa): Use print function
4861 from within the disassemble_info, not fprintf_filtered.
4863 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4865 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4866 Law, law@cs.utah.edu.)
4868 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4870 * mips-opc.c ("absu"): Removed.
4873 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4875 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4876 Changed hazard information to distinguish between memory load
4877 delays and coprocessor load delays.
4879 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4881 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4883 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4885 * configure.in: Don't pass cpu to config.bfd.
4887 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4889 * m88k-dis.c (m88kdis): Make class unsigned.
4891 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4893 * alpha-dis.c (print_insn_alpha): One branch format case was
4894 missing the instruction name.
4896 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4898 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4899 Add the arch-specific auxiliary files.
4900 (OFILES): Remove the arch-specific auxiliary files
4901 and use BFD_MACHINES instead of DIS_LIBS.
4902 * configure.in: Set BFD_MACHINES based on --with-targets option.
4904 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4906 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4909 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4911 * sparc-opc.c: Change CONST to const to deal with gcc
4912 -Dconst=__const -traditional.
4914 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4916 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4917 coprocessor instructions out of #if 0, and made them use new
4920 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4922 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4924 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4926 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4927 instruction, for use by the disassembler.
4929 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4930 hand-coded sign extensions that depended on 32-bit host ints.
4931 FIXME, we still depend on big-endian host bitfield ordering.
4932 (sparc_print_insn): Set the insn_info_valid field, and the
4933 other fields that describe the instruction being printed.
4935 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4937 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4938 `jmp' instead of just one of them.
4940 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4942 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4943 (fput_fp_reg_r): Renamed from fput_reg_r.
4944 (fput_fp_reg): New function.
4945 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4947 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4949 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4951 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4953 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4955 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4956 don't output a space.
4958 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4960 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4962 * mips-opc.c: New file, containing opcode table from
4963 ../include/opcode/mips.h.
4964 * Makefile.in: Add it.
4966 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4968 * m88k-dis.c: New file, moved in from gdb and changed to use the
4969 new dis-asm.h disassembler interface.
4970 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4971 (m88k-dis.o): New target.
4973 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4975 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4976 argument string const char * to correspond to opcode/mips.h.
4978 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4980 * mips-dis.c: Updated to account for name changes in new version
4982 * Makefile.in: Added header file dependencies.
4984 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4986 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4988 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4990 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4991 extend, rather than shifts.
4993 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4995 * Makefile.in: Undo 15 June change.
4997 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4999 * m68k-dis.c (print_insn_arg): Change return value to byte count
5001 * m68k-dis.c: Re-write to detect invalid operands before
5002 printing anything, so we can handle this the same way we
5003 handle invalid opcodes.
5005 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5007 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5009 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5011 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5014 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5016 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5018 * configure.in: Do make sysdep.h link.
5019 * Makefile.in: Search ../include. Don't search ../bfd.
5021 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5023 Changes from Jeff Law, law@cs.utah.edu:
5024 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5025 Do not print a space before the completers specified by
5028 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5030 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5031 defined, since gdb has been fixed.
5033 Changes from Jeff Law, law@cs.utah.edu:
5034 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5035 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5036 be a *disassemble_info, not a *FILE.
5037 * hppa-dis.c: Support 'd', '!', and 'a'.
5038 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5039 * hppa-dis.c: Delete cases which are no longer needed.
5041 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5043 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5045 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5047 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5050 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5052 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5053 * configure.in: No longer need to configure to get sysdep.h.
5055 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5057 * Patches from Jeffrey Law <law@cs.utah.edu>.
5058 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5059 templates for 1.1 FP computational instructions.
5061 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5063 * h8500-dis.c (print_insn_h8500): Address argument is type
5065 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5068 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5069 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5071 * sparc-dis.c (compare_opcodes): Move static declaration to
5074 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5076 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5077 instruction, remove unimp hack from 'l' argument.
5079 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5081 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5084 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5086 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5087 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5090 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5092 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5093 arrays of string pointers to 2-d arrays of chars, to save
5096 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5098 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5099 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5101 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5103 * hppa-dis.c: New file from Utah, adapted to new disassembler
5105 * Makefile.in: Include it.
5107 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5109 * sh-dis.c, sh-opc.h: New files.
5111 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5113 * alpha-dis.c, alpha-opc.h: New files.
5115 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5117 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5120 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5122 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5124 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5126 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5129 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5131 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5132 and double percent signs a few places.
5134 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5136 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5137 Use info->print_address_func not print_address.
5139 * dis-buf.c (generic_print_address): New function.
5141 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5143 * Makefile.in: Add sparc-dis.c.
5144 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5146 Add `add' instruction to the set that get checked
5147 for a preceding `sethi' in order to print an absolute address.
5148 * (print_insn): Disassembly prefers real instructions.
5149 (is_delayed_branch): Speed up.
5150 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5151 Still missing some float ops, and needs testing.
5152 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5153 F_ALIAS. Use printf, not fprintf, when not passing a file
5155 (compare_opcodes): Check that identical instructions have
5156 identical opcodes, complain otherwise.
5159 * Include reg_names.
5161 Use dis-asm.h/read_memory_func interface.
5163 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5165 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5166 deliberately return non-zero to setjmp from longjmp. Otherwise
5167 this code fails to compile.
5169 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5171 * m68k-dis.c: Fix prototype for fetch_arg().
5173 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5175 * dis-buf.c: New file, for new read_memory_func interface.
5176 Makefile.in (OFILES): Include it.
5177 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5178 Use new read_memory_func interface.
5180 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5182 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5183 * h8500-opc.h: Fix couple of opcodes.
5185 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5187 * Makefile.in: add dvi & installcheck targets
5189 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5191 * Makefile.in: Update for h8500-dis.c.
5193 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5195 * h8500-dis.c, h8500-opc.h: New files
5197 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5199 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5200 ../include/dis-asm.h.
5201 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5202 and ../gdb/m68k-pinsn.c).
5203 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5204 and ../gdb/i386-pinsn.c).
5205 * m68881-ext.c: New file. Moved definition of
5206 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5207 * Makefile.in: Adjust for new files.
5208 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5209 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5210 can be dis-assembled.
5212 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5214 * mips-dis.c (print_insn_arg): Now returns void.
5216 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5218 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5219 files that use the macros.
5221 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5223 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5224 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5225 (CFILES): Added mips-dis.c.
5227 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5229 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5230 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5232 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5234 * Makefile.in: Improve *clean rules.
5235 * configure.in: Allow a default host.
5237 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5239 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5240 files include other sysdep files
5242 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5244 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5246 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5248 * configure.in: For host support, use ../bfd/configure.host
5249 so it stays in sync with the ../bfd/hosts database.
5251 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5253 * configure.in: use cpu-vendor-os triple instead of nested cases
5255 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5257 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5258 *always* the wrong one.
5260 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5262 * z8kgen.c: added copyright info
5264 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5266 * z8k-dis.c (unparse_instr): prettier tabs
5267 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5269 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5271 * configure.in: Add ncr* configuration.
5272 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5273 picayune ANSI compilers happy.
5275 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5277 * configure.in (i386): Make i386 and i486 synonymous for now.
5278 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5280 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5282 * Makefile.in (install): Fix typo.
5284 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5286 * Makefile.in (make): Remove obsolete crud.
5287 (sparc-opc.o): Avoid Sun Make VPATH bug.
5289 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5291 * Makefile.in: since there are no SUBDIRS, remove rule and
5292 references of subdir_do.
5294 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5296 * Makefile.in (install): Get the library name right here too.
5297 Don't install bfd.h, since it's unrelated to this library. No
5298 subdirs to recurse into, either.
5299 (CFILES): The source file has a .c suffix, not .o.
5301 * sparc-opc.c: New file, moved from BFD.
5302 * Makefile.in (OFILES): Build it.
5304 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5306 * z8k-dis.c: fixed forward refferences of some declarations.
5308 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5310 * Makefile.in: get the name of the library right
5312 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5314 * z8k-dis.c: knows how to disassemble z8k stuff
5315 * z8k-opc.h: new file full of z8000 opcodes
5319 version-control: never