opcodes/ChangeLog

   1 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
   2
   3         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
   4         <sergei@msil.sps.mot.com>.
   5
   6 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
   7
   8         * makefile.vms: New file.
   9
  10         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
  11
  12 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
  13
  14         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
  15         regardless of plen.
  16
  17 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
  18
  19         * i386-dis.c (OP_OFF): Call append_prefix.
  20
  21 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
  22
  23         * ppc-opc.c (instruction encoding macros): Add explicit casts to
  24         unsigned long to silence a warning from the Solaris PowerPC
  25         compiler.
  26
  27 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
  28
  29         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
  30
  31 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
  32
  33         * sparc-dis.c (X_IMM,X_SIMM): New macros.
  34         (X_IMM13): Delete.
  35         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
  36         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
  37         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
  38         cpush, cpusha, cpull sparclet insns.
  39
  40 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
  41
  42         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
  43
  44 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
  45
  46         * sparc-opc.c: Set F_FBR on floating point branch instructions.
  47         Set F_FLOAT on other floating point instructions.
  48
  49 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
  50
  51         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
  52         registers.
  53         (powerpc_opcodes): Add 860/821 specific SPRs.
  54
  55 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
  56
  57         * configure.in: Permit --enable-shared to specify a list of
  58         directories.  Set and substitute BFD_PICLIST.
  59         * configure: Rebuild.
  60         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
  61         uses.  Set to @BFD_PICLIST@.
  62
  63 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
  64
  65         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
  66         not "abs", which may be needed for the absolute in something
  67         like btst #0,@10:8.  Print L_3 immediates separately from other
  68         immediates.  Change ABSMOV reference to ABS8MEM.
  69
  70 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
  71
  72         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
  73         (current_arch_mask): New static global.
  74         (compute_arch_mask): New static function.
  75         (print_insn_sparc): Delete sparc_v9_p.  New static local
  76         current_mach.  Resort opcode table if current_mach changes.
  77         Generalize "insn not supported" test.
  78         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
  79         Delete test for v9/!v9.
  80         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
  81         (v6notlet): Define.
  82         (brfc): Split into CBR and FBR for coprocessor/fp branches.
  83         (brfcx): Renamed to FBRX.
  84         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
  85         coprocessor mnemonics are not supported on the sparclet).
  86         (condf): Renamed to CONDF.
  87         (SLCBCC2): Delete F_ALIAS flag.
  88
  89 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
  90
  91         * sparc-opc.c (sparc_opcodes): rd must be 0 for
  92         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
  93
  94 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
  95
  96         * Makefile.in (config.status): Depend upon BFD VERSION file, so
  97         that the shared library version number is set correctly.
  98
  99 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
 100
 101         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
 102         Miles Bader <miles@gnu.ai.mit.edu>.
 103         * configure: Rebuild.
 104
 105 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
 106
 107         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
 108         malloc.
 109
 110 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
 111
 112         * configure: Rebuild with autoconf 2.8.
 113
 114 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
 115
 116         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
 117         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
 118
 119 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
 120
 121         * configure.in: Don't set SHLIB or SHLINK to an empty string,
 122         since they appear as targets in Makefile.in.
 123         * configure: Rebuild.
 124
 125 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
 126
 127         * mpw-make.sed: Edit out shared library support bits.
 128
 129 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
 130
 131         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
 132         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
 133         (sparc_opcodes): Add sparclet insns.
 134         (sparclet_cpreg_table): New static local.
 135         (sparc_{encode,decode}_sparclet_cpreg): New functions.
 136         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
 137
 138 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
 139
 140         * i386-dis.c (index16): New static variable.
 141         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
 142         other way around.
 143         (OP_indirE): Return result of OP_E.
 144         (OP_E): Check for 16 bit addressing mode, and disassemble
 145         correctly.  Optimised 32 bit case a little.  Don't print
 146         "(base,index,scale)" when sib specifies only an offset.
 147
 148 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
 149
 150         * configure.in: Set and substitute SHLIB_DEP.
 151         * configure: Rebuild.
 152         * Makefile.in (SHLIB_DEP): New variable.
 153         (LIBIBERTY_LISTS, BFD_LIST): New variables.
 154         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
 155         COMMON_SHLIB, add them to piclist with appropriate modifications.
 156         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
 157         here: just use piclist.
 158
 159 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
 160
 161         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
 162         (print_insn_sparc): Rewrite v9/not-v9 tests.
 163         (compare_opcodes): Likewise.
 164         * sparc-opc.c (MASK_<ARCH>): Define.
 165         (v6,v7,v8,sparclite,v9,v9a): Redefine.
 166         (sparclet,v6notv9): Define.
 167         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
 168         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
 169
 170 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
 171
 172         * configure.in: Call AC_PROG_CC before configure.host.
 173         * configure: Rebuild.
 174
 175         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
 176
 177 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
 178
 179         * i386-dis.c (onebyte_has_modrm): New static array.
 180         (twobyte_has_modrm): New static array.
 181         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
 182
 183 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
 184
 185         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
 186         $(SHLINK).
 187
 188 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 189
 190         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
 191         doesn't conflict.
 192
 193 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
 194
 195         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
 196         m68010up, not just m68020up | cpu32.
 197
 198         * Makefile.in (SONAME): New variable.
 199         ($(SHLINK)): Make a link to the transformed name, as well.
 200         (stamp-tshlink): New target.
 201         (install): Skip stamp-tshlink during install.
 202
 203 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
 204
 205         * configure.in: Call AC_ARG_PROGRAM.
 206         * configure: Rebuild.
 207         * Makefile.in (program_transform_name): New variable.
 208         (install): Transform library name before installing it.
 209
 210 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
 211
 212         * i960-dis.c (mem): Add HX dcinva instruction.
 213
 214         Support for building as a shared library, based on patches from
 215         Alan Modra <alan@spri.levels.unisa.edu.au>:
 216         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
 217         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
 218         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
 219         * configure: Rebuild.
 220         * Makefile.in (ALLLIBS): New variable.
 221         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
 222         (COMMON_SHLIB, SHLINK): New variables.
 223         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
 224         (STAGESTUFF): Remove variable.
 225         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
 226         (stamp-piclist, piclist): New targets.
 227         ($(SHLIB), $(SHLINK)): New targets.
 228         ($(OFILES)): Depend upon stamp-picdir.
 229         (disassemble.o): Build twice if PICFLAG is set.
 230         (MOSTLYCLEAN): Add pic/*.o.
 231         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
 232         (distclean): Remove pic and stamp-picdir.
 233         (install): Install shared libraries.
 234         (stamp-picdir): New target.
 235
 236 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
 237
 238         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
 239         Print unknown instruction as "unknown", rather than in hex.
 240
 241 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
 242
 243         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
 244
 245 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
 246
 247         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
 248
 249 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
 250
 251         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
 252         when necessary.  From Ulrich Drepper
 253         <drepper@myware.rz.uni-karlsruhe.de>.
 254
 255 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
 256
 257         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
 258         sparc_num_opcodes.  Update architecture enum values.
 259         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
 260         (sparc_opcode_lookup_arch): New function.
 261         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
 262         (sparc_opcodes): Add v9a shutdown insn.
 263
 264 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
 265
 266         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
 267         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
 268         architecture.
 269         (print_insn_sparc64): Deleted.
 270         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
 271         print_insn_sparc.
 272
 273         * sparc-opc.c (architecture_pname): Add v9a.
 274
 275 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
 276
 277         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
 278         incorrectly defined as 0x16 when it should be 0x15.
 279         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
 280         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
 281         excb (exception barrier) which is defined in the Alpha
 282         Architecture Handbook version 2.
 283         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
 284         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
 285         disassembled as or, for example.
 286
 287 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
 288
 289         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
 290         (_print_insn_mips): Change i from int to unsigned int.
 291
 292 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
 293
 294         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
 295         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
 296
 297 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
 298
 299         * i386-dis.c: Added Pentium Pro instructions.
 300
 301 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 302
 303         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
 304         being for Power2.
 305
 306 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 307
 308         * sh-opc.h (sh_nibble_type): Added REG_B.
 309         (sh_arg_type): Added A_REG_B.
 310         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
 311         and stc.l opcodes.
 312         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
 313
 314 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 315
 316         * disassemble.c (disassembler): Use new bfd_big_endian macro.
 317
 318 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
 319
 320         * Makefile.in (distclean): Remove stamp-h.  From Ronald
 321         F. Guilmette <rfg@monkeys.com>.
 322
 323 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
 324
 325         From David Mosberger-Tang  <davidm@azstarnet.com>:
 326         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
 327         instruction.
 328
 329 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 330
 331         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
 332         (sh_table): Added many SH3 opcodes.
 333         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
 334
 335 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 336
 337         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
 338         (subco,subco.): Mark this PPC, not PPCCOM.
 339
 340 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
 341
 342         * configure: Rebuild with autoconf 2.7.
 343
 344 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
 345
 346         * configure: Rebuild with autoconf 2.6.
 347
 348 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
 349
 350         * configure.in: Sort list of architectures.  Accept but do nothing
 351         for alliant, convex, pyramid, romp, and tahoe.
 352
 353 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
 354
 355         * a29k-dis.c (print_special): Change num to unsigned int.
 356
 357 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
 358
 359         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
 360         shifting it.
 361
 362 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
 363
 364         * configure.in: Call AC_CHECK_PROG to find and cache AR.
 365         * configure: Rebuilt.
 366
 367 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
 368
 369         * configure.in: Add case for bfd_i860_arch.
 370         * configure: Rebuild.
 371
 372 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 373
 374         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
 375         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
 376         (NEXTDOUBLE): Likewise.
 377         (print_insn_m68k): Don't match fmoveml if there is more than one
 378         register in the list.
 379         (print_insn_arg): Handle a place of '8' for a type of 'L'.
 380
 381 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 382
 383         * m68k-opc.c: Use #W rather than #w.
 384         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
 385
 386 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
 387
 388         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
 389         and likewise for all the dbxx opcodes.
 390
 391 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
 392
 393         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
 394
 395 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
 396
 397         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
 398         the VR4100 specific instructions to the mips_opcodes structure.
 399
 400 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
 401
 402         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
 403         ugly Metrowerks bug in CW6, is fixed in CW7.
 404
 405 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 406
 407         * ppc-opc.c (whole file): Add flags for common/any support.
 408
 409 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
 410
 411         * Makefile.in (BISON): Remove macro.
 412         (FLAGS_TO_PASS): Remove BISON.
 413
 414 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
 415
 416         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 417
 418         * m68k-dis.c (print_insn_m68k): Recognize all two-word
 419         instructions that take no args by looking at the match mask.
 420         (print_insn_arg): Always print "%" before register names.
 421         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
 422         [case '_']: Don't print "@#" before address.
 423         [case 'J']: Use "%s" as format string, not register name.
 424         [case 'B']: Treat place == 'C' like 'l' and 'L'.
 425
 426 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
 427
 428         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
 429         name correctly.
 430
 431 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
 432
 433         From David Mosberger-Tang  <davidm@azstarnet.com>
 434
 435         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
 436         (alpha_insn_set): added definitions for VAX floating point
 437         instructions (Unix compilers don't generate these, but handcoded
 438         assembly might still use them).
 439
 440         * alpha-dis.c (print_insn_alpha): added support for disassembling
 441         the miscellaneous instructions in the Alpha instruction set.
 442
 443 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
 444
 445         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
 446         no longer create sysdep.h, sed ppc-opc.c to work around a
 447         serious Metrowerks C bug.
 448         * mpw-make.in: Remove.
 449         * mpw-make.sed: New file, used by mpw-configure to edit
 450         Makefile.in into an MPW makefile.
 451
 452 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
 453
 454         * Makefile.in (maintainer-clean): New synonym for realclean.
 455
 456 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 457
 458         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
 459         which use '0', '1', and '2' instead.  Specify the proper size for
 460         a pmove immediate operand.  Correct the pmovefd patterns to be
 461         moves to a register, not from a register.
 462         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
 463
 464 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
 465
 466         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
 467         %psr, %wim, %tbr as F_NOTV9.
 468
 469 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
 470
 471         * Makefile.in (Makefile): Just rebuild Makefile when running
 472         config.status.
 473         (config.h, stamp-h): New targets.
 474         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
 475         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
 476         rebuilding config.h.
 477         * configure: Rebuild.
 478
 479         * mips-opc.c: Change unaligned loads and stores with "t,A"
 480         operands to use "t,A(b)".
 481
 482 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 483
 484         * sh-dis.c (print_insn_shx): Add F_FR0 support.
 485
 486 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 487
 488         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
 489         until 3 instead of until 2.
 490
 491 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 492
 493         * Makefile.in (ALL_CFLAGS): Define.
 494         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
 495         (MOSTLYCLEAN): Add config.log.
 496         (distclean): Don't remove config.log.
 497         * configure.in: Substitute HDEFINES.
 498         * configure: Rebuild.
 499
 500 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 501
 502         * sh-opc.h (sh_arg_type): Add F_FR0.
 503         (sh_table, case fmac): Add F_FR0 as first argument.
 504
 505 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 506
 507         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
 508
 509 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
 510
 511         * sparc-dis.c: Remove all references to NO_V9.
 512
 513 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
 514
 515         * aclocal.m4: Just include ../bfd/aclocal.m4.
 516         * configure: Rebuild.
 517
 518 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
 519
 520         * sparc-dis.c (X_DISP19): Define.
 521         (print_insn, case 'G'): Use it.
 522         (print_insn, case 'L'): Sign extend displacement.
 523
 524 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
 525
 526         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
 527         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
 528         host_makefile_frag or frags.
 529         * aclocal.m4: New file.
 530         * configure: Rebuild.
 531         * Makefile.in (INSTALL): Set to @INSTALL@.
 532         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
 533         (INSTALL_DATA): Set to @INSTALL_DATA@.
 534         (AR): Set to @AR@.
 535         (AR_FLAGS): Set to rc rather than qc.
 536         (CC): Define as @CC@.
 537         (CFLAGS): Set to @CFLAGS@.
 538         (@host_makefile_frag@): Remove.
 539         (config.status): Remove dependency upon @frags@.
 540
 541         * configure.in: ../bfd/config.bfd now just sets shell variables.
 542         Use them rather than looking through target Makefile fragments.
 543         * configure: Rebuild.
 544
 545 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 546
 547         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
 548
 549 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
 550
 551         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
 552         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
 553         sparc64 insns.
 554
 555         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
 556         (lookup_{name,value}): New functions.
 557         (prefetch_table): New static local.
 558         (sparc_{encode,decode}_prefetch): New functions.
 559         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
 560
 561 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 562
 563         * sh-opc.h: Add blank lines to improve readabililty of sh3e
 564         instructions.
 565
 566 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 567
 568         * sh-dis.c: Correct comment on first line of file.
 569
 570 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
 571
 572         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
 573
 574         * sparc-opc.c (asi, membar): New static locals.
 575         (sparc_{encode,decode}_{asi,membar}): New functions.
 576         (sparc_opcodes, membar insn): Fix.
 577         * sparc-dis.c (print_insn): Call sparc_decode_asi.
 578         Support decoding of membar masks.
 579         (X_MEMBAR): Define.
 580
 581 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
 582
 583         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
 584
 585 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 586
 587         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
 588         and likewise for the other branches.  Add bhs as an alias for bcc,
 589         and likewise for the size variants.  Add dbhs as an alias for
 590         dbcc.
 591
 592 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 593
 594         * sh-opc.h (FP sts instructions): Update to match reality.
 595
 596 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 597
 598         * m68k-dis.c: (fpcr_names): Add % before all register names.
 599         (reg_names): Likewise.
 600         (print_insn_arg): Don't explicitly print % before register names.
 601         Add % before register names in static array names.  In case 'r',
 602         print data registers as `@(Dn)', not `Dn@'.  When printing a
 603         memory address, don't print @# before it.
 604         (print_indexed): Change base_disp and outer_disp from int to
 605         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 606         syntax.  Sign extend 8 byte displacement correctly.
 607         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 608         Change parameter disp from int to bfd_vma.
 609
 610         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 611         for jsr.
 612
 613 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 614
 615         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 616         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 617         * sh-opc.h (sh_arg_type): Add new operand types.
 618         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 619
 620 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 621
 622         * Makefile.in (distclean): Remove generated file config.h.
 623
 624 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 625
 626         * Makefile.in (distclean): Remove generated file config.h.
 627
 628 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 629
 630         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 631         Clean up tables.
 632         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 633         (opcode): Remove.
 634         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 635         rather than numopcodes.  Use m68k_opcodes rather than removed
 636         opcode function.  Don't check F_ALIAS.
 637         (print_insn_arg): Change first parameter to be const char *.
 638         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 639         (m68k-opc.o): New target.
 640         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 641         * configure: Rebuild.
 642
 643 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 644
 645         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 646         (opcode_bits, opcode_hash_table): New variables.
 647         (opcodes_initialized): Renamed from opcodes_sorted.
 648         (build_hash_table): New function.
 649         (is_delayed_branch): Use hash table.
 650         (print_insn): Renamed from print_insn_sparc, made static.
 651         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 652         and vice-versa if sparc64.
 653         (print_insn_sparc, print_insn_sparc64): New functions.
 654         (compare_opcodes): Move sparc64 opcodes to end.
 655         Print commutative insns with constant second.
 656         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 657
 658 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 659
 660         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 661         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 662         avoids printing a delay slot in a delay slot.
 663         * sh-opc.h (sh_table): Fully bracket last entry.
 664
 665 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 666
 667         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 668
 669 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 670
 671         * configure.in: Get host_makefile_frag from ${srcdir}.
 672
 673         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 674         config.h from config.in.  Don't set up sysdep.h link.
 675         * sysdep.h: New file.
 676         * configure, config.in: New files, generated from configure.in.
 677         * Makefile.in: Updated to be processed autoconf-style.
 678         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 679         (Makefile): Depend on config.status.
 680         (config.status): New rule.
 681         * configure.bat: Update Makefile substitutions.
 682
 683 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 684
 685         * mips-opc.c (L1): Define.
 686         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 687         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 688         and wb.
 689
 690 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 691
 692         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 693         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 694         have multiple add units but only a single logical unit.
 695
 696         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 697         shifted by 18, without any insertion or extraction function.
 698         (insert_cr, extract_cr): Remove.
 699
 700 start-sanitize-arc
 701 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 702
 703         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 704
 705 end-sanitize-arc
 706 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 707
 708         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 709         register names.
 710
 711 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 712
 713         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 714         * sh-opc.h: Add copyright.
 715
 716 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 717
 718         * Makefile.in (crunch-m68k): Delete extra target accidentally
 719         checked in a while ago.
 720
 721 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 722
 723         * sh-opc.h (sh_table): Add SH3 support.
 724
 725 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 726
 727         * sh-opc.h: Added bsrf and braf.
 728
 729 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 730
 731         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 732         bogus [ls]fm{ea,fd} patterns.
 733
 734         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 735         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 736         initialize it from memory.  Make function static.
 737         (print_insn_{big,little}_arm): New functions.
 738         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 739         the correct endianness.
 740
 741 start-sanitize-arc
 742 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 743
 744         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 745         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 746 end-sanitize-arc
 747
 748 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 749
 750         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 751         enum list.
 752
 753 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 754
 755         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 756         17th, so that it builds again using GCC as the compiler.
 757
 758 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 759
 760         * mips-dis.c (print_insn_little_mips): Cast return value from
 761         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 762         expects an unsigned long, and that might be fewer words of
 763         argument storage (e.g., if bfd_vma is long long on a 32-bit
 764         machine).
 765         (print_insn_big_mips): Likewise with bfd_getb32 value.
 766         (_print_insn_mips): Now static.
 767
 768 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 769
 770         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 771         gcc memory hog problem with initializer is fixed.
 772
 773 start-sanitize-arc
 774 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 775
 776         * arc-opc.c (NULL): Define.
 777         (arc_operands, insn fields u,s): Delete.
 778         (arc_operands, insn fields a,b,c): Mark as signed.
 779         (arc_opcodes): No longer const, links computed at run-time.
 780         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 781         suffixes that affect the insn code.
 782         (arc_opcodes): Resort table to macros are first.
 783         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 784         (arc_opcodes, st [b] entry): Likewise.
 785         (arc_opcodes, st [b,d] entry): Fix mask, value.
 786         (arc_reg_names): Add entries for r29, r30, r31, r60.
 787         (opcode_map, icode_map): New static globals.
 788         (arc_opcode_init_tables): Initialize them.
 789         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 790         (insert_shimmoffset): Signal error if register present.
 791         Validate constant.
 792         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 793 end-sanitize-arc
 794
 795 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 796
 797         Merge in support for Mac MPW as a host.
 798         (Old change descriptions retained for informational value.)
 799
 800         * mpw-config.in (archname): Compute from the config.
 801         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 802
 803         * mpw-config.in (target_arch): Compute from canonical target.
 804         (m68k, mips, powerpc, sparc): Add architectures.
 805         * mpw-make.in (disassemble.c.o): Add.
 806         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 807
 808         * mpw-config.in (BFD_MACHINES): Set to a default value.
 809         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 810
 811         * mpw-make.in (CSEARCH): Add extra-include to search path.
 812
 813         * mpw-config.in (varargs.h): Don't create.
 814         (sysdep.h): Create using forward-include.
 815         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 816
 817         * mpw-config.in: New file, MPW version of configure.in.
 818         * mpw-make.in: New file, MPW version of Makefile.in.
 819
 820 start-sanitize-arc
 821 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 822
 823         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 824         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 825         (print_insn_*): Pass bfd mach number, not opcode version.
 826         * arc-opc.c (arc_get_opcode_mach): New function.
 827 end-sanitize-arc
 828
 829 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 830
 831         * alpha-dis.c (print_insn_alpha): Put empty statement after
 832         default label.
 833
 834 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 835
 836         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 837         (low_sign_extend): Likewise.
 838         (get_field): Delete unused function.
 839         (set_field, deposit_14, deposit_21): Likewise.
 840
 841 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 842
 843         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 844           (guy@netapp.com).
 845
 846 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 847
 848         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 849
 850         * alpha-opc.h (OSF_ASMCODE): define
 851         print pal-code names as defined in App C of the
 852         Alpha Architecture Reference Manual
 853
 854         * alpha-dis.c: cleaned up output
 855         print stylized code forms as defined in App A.4.3 of the
 856         Alpha Architecture Reference Manual
 857
 858 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 859
 860         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 861         `rfe'.
 862         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 863         'N', and 'M'.
 864
 865 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 866
 867         * m68k-dis.c (opcode): New function.  Returns address of opcode
 868         table entry given index, even if the opcode table was split to
 869         work around gcc bugs.
 870         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 871         directly.
 872         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 873         (reg_names): Now const.
 874         (print_insn_arg): Arrays cacheFieldName and names now const.
 875         (print_indexed): Array scales now const.
 876
 877 start-sanitize-arc
 878 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 879
 880         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 881         (print_insn_arc_{host,graphics,audio}): Likewise.
 882         (print_insn): Add prototype.
 883         (arc_get_disassembler): New arg `big_p'.  Return little or big
 884         print fn accordingly.
 885         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 886         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 887         (arc_opval_supported): Likewise.
 888         * disassemble.c (disassembler): Pass big endian flag to
 889         arc_get_disassembler.
 890 end-sanitize-arc
 891
 892 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 893
 894         * ppc-opc.c: Sort recently added instructions by minor opcode
 895         number within major opcode number.
 896
 897 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 898
 899         * hppa-dis.c: Include libhppa.h.
 900
 901 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 902
 903         * mips-opc.c: Change dli to use M_DLI, and add dla.
 904
 905 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 906
 907         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 908
 909 start-sanitize-arc
 910 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 911
 912         * arc-dis.c (arc_get_disassembler): Change argument to int,
 913         one of bfd_mach_arc_xxx.  All callers updated.
 914 end-sanitize-arc
 915
 916 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 917
 918         * mips-opc.c: Add r4650 mul instruction.
 919
 920 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 921
 922         * mips-opc.c: Add uld and usd macros for unaligned double load and
 923         store.
 924
 925 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 926
 927         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 928         mfdcr, mtdcr, icbt, iccci.
 929
 930 start-sanitize-arc
 931 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 932
 933         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 934         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 935         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 936         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 937         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 938         (insert_absaddr): New function.
 939
 940 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 941
 942         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 943         New argument `cpu', pass it to arc_opcode_init_tables.
 944         Document byte order dependencies.  Ignore unsupported insns.
 945         (arc_get_disassembler): New function.
 946         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 947         print_insn_arc_audio): New functions.
 948         * arc-opc.c (MULTSHIFT operand): Delete.
 949         (UNSIGNED, SATURATION): New operands.
 950         (mac, mul, mul64, mulu64): New insns.
 951         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 952         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 953         (host,graphics,audio extended and auxiliary regs): Define.
 954         (ss, sc, mh, ml): New suffixes.
 955         (arc_opcode_supported, arc_opval_supported): New functions.
 956         (insert_multshift, extract_multshift): Deleted.
 957         * disassemble.c (disassembler, case bfd_arch_arc): Call
 958         arc_get_disassembler to get disassembler routine.
 959 end-sanitize-arc
 960
 961 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 962
 963         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 964         signed char fields to shorts, more portable.
 965
 966 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 967
 968         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 969         char fields as signed chars, since they may have negative values.
 970
 971 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 972
 973         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 974           (mycroft@netbsd.org).
 975
 976 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 977
 978         From "Logg, Ed" <elogg@ea.com>:
 979         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 980         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 981         value.
 982
 983 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 984
 985         * ppc-opc.c: Changes based on patch from David Edelsohn
 986         <edelsohn@mhpcc.edu>.
 987         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 988         SPR.
 989         (FXM_MASK): Define.
 990         (insert_tbr): New static function.
 991         (extract_tbr): New static function.
 992         (XFXFXM_MASK, XFXM): Define.
 993         (XSPRBAT_MASK, XSPRG_MASK): Define.
 994         (powerpc_opcodes): Add instructions to access special registers by
 995         name.  Add mtcr and mftbu.
 996
 997 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 998
 999         * mips-opc.c (P3): Define.
1000         (mips_opcodes): Add mad and madu.
1001
1002 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
1003
1004         * configure.in: Add W65 support.
1005         * disassemble.c: Likewise.
1006         * w65-opc.h, w65-dis.c: New files.
1007
1008 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1009
1010         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1011         immediates.
1012
1013 start-sanitize-arc
1014 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
1015
1016         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1017         slot.
1018         * arc-opc.c (extract_reladdr): New function.
1019         (insert_reladdr): Store address right-shifted by 2.
1020 end-sanitize-arc
1021
1022 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1023
1024         * mips-opc.c: Add dli as a synonym for li.
1025
1026 start-sanitize-arc
1027 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
1028
1029         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1030         All uses changed.
1031         (extraction fns): Insn argument now array of two words.  Return pointer
1032         to value's table entry.  All uses changed.
1033         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1034         (insert_multshift, extract_multshift): New fns.
1035         (arc_operands): Add support for cache bypass suffix.  Add support for
1036         predefined aux regs.  Modifier bits moved to flags field.
1037         (arc_opcodes): Likewise.
1038         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
1039         New insn rlc.  Update to syntax in programmer's manual.
1040         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
1041         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
1042         bypass.
1043         (arc_opcode_init_tables): New argument to indicate cpu type.
1044         (insert_reg): Handle predefined aux regs.
1045         (extract_reg): Likewise.
1046         (lookup_register): New fn.
1047         * arc-dis.c (arc_condition_codes): Deleted.
1048         (print_insn_arc): Handle insns with 32 bit immediate constants better.
1049         Clean up modifier handling.  Handle predefined aux regs.
1050 end-sanitize-arc
1051
1052 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
1053
1054         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1055         print something for reserved opcode values, even if it won't
1056         assemble again.
1057
1058         * mips-dis.c (_print_insn_mips): When initializing, shift right
1059         and mask, to avoid sign extension problems on the Alpha.
1060
1061         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1062         control registers.
1063
1064 start-sanitize-arc
1065 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
1066
1067         * configure.in: Add ARC support.
1068         * disassemble.c: Likewise.
1069         * arc-dis.c, arc-opc.c: New files.
1070 end-sanitize-arc
1071
1072 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1073
1074         * sh-opc.h (mov.l gbr): Get direction right.
1075         * sh-dis.c (print_insn_shx): New function.
1076         (print_insn_shl, print_insn_sh): Call print_insn_shx to
1077         print opcodes with right byte order.
1078
1079 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
1080
1081         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1082         to avoid conflicts with getopt.
1083
1084 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1085
1086         * hppa-dis.c (print_insn_hppa): Read the instruction using
1087         bfd_getb32, so that it works on a little endian or 64 bit host.
1088         Remove unused local variable op.
1089
1090 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1091
1092         * mips-opc.c: Use or instead of addu for pseudo-op move, since
1093         addu does not work correctly if -mips3.
1094
1095 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1096
1097         * a29k-dis.c (print_special): Add special register names defined
1098         on 29030, 29040 and 29050.
1099         (print_insn): Handle new operand type 'I'.
1100
1101 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1102
1103         * Makefile.in (INSTALL): Use top level install.sh script.
1104
1105 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1106
1107         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1108         that it works on a little endian host.
1109
1110 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
1111
1112         * configure.in: Use ${config_shell} when running config.bfd.
1113
1114 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1115
1116         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1117
1118 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1119
1120         * a29k-dis.c (print_insn): Print the opcode.
1121
1122 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1123
1124         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1125
1126 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
1127
1128         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1129
1130 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1131
1132         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1133         which store a value into memory.
1134
1135 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1136
1137         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1138         * arm-dis.c, arm-opc.h: New files.
1139
1140 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
1141
1142         * Makefile.in (ns32k-dis.o): Add dependency.
1143         * ns32k-dis.c (print_insn_arg): Declare initialized local as
1144         string, not as array of chars.
1145
1146 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1147
1148         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1149
1150         * sparc-opc.c: Added sparclite extended FP operations, and
1151         versions of v9 impdep* instructions permitting specification of
1152         the OPF field.
1153
1154 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1155
1156         * i960-dis.c (reg_names): Now const.
1157         (struct sparse_tabent): New type, copied from array type in mem
1158         function.
1159         (ctrl): Local static array ctrl_tab now const.
1160         (cobr): Local static array cobr_tab now const.
1161         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
1162         static variable mem_tab no longer explicitly initialized.  Changed
1163         mem_init to const array of struct sparse_tabent.
1164         (reg): Local static variable reg_tab no longer explicitly
1165         initialized.  Changed reg_init to const array of struct
1166         sparse_tabent.
1167         (ea): Local static array scale_tab now const.
1168
1169         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1170         (REG_MAX): Updated.
1171
1172 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
1173
1174         * configure.bat: the disassember needs to be enabled for
1175         "objdump -d" to work in djgpp.
1176
1177 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1178
1179         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1180         (invalid_float): Enabled general version, doesn't require running
1181         on ns32k host.  Changed to take char* argument, and test for
1182         explicitly specified sizes, instead of using sizeof() on host CPU
1183         types.
1184         (INVALID_FLOAT): Cast first argument.
1185         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1186         list_P032, list_M032): Now const.
1187         (optlist, list_search): Made appropriate arguments now point to
1188         const.
1189         (print_insn_arg): Changed static array of one-character-string
1190         pointers into a static const array of characters; fixed sprintf
1191         statement accordingly.
1192
1193 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
1194
1195         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
1196         from distribution. A ns32k-dis.c from a previous distribution has
1197         been brought up to date and supports the new interface.
1198
1199         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1200
1201         * configure.in: add bfd_ns32k_arch target support.
1202
1203         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1204         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1205
1206 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
1207
1208         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1209         disassembly right.
1210
1211 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
1212
1213         * h8300-dis.c, mips-dis.c: Don't use true and false.
1214
1215 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
1216
1217         * configure.in: Change --with-targets to --enable-targets.
1218
1219 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1220
1221         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1222         opcodes to the first instruction with that opcode, to speed
1223         disassembly of large files.  From ralphc@pyramid.com (Ralph
1224         Campbell).
1225
1226 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1227
1228         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1229
1230 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
1231
1232         * configure.bat: update to latest makefile.in
1233
1234 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
1235
1236         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1237         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1238         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1239         slot insn is in a delay slot.
1240         * z8k-opc.h: (resflg): Fix patterns.
1241         * h8500-opc.h Fix CR insn patterns.
1242
1243 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1244
1245         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1246         "cmpl" before POWER versions, so that gas -many uses them.
1247
1248 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1249
1250         * disassemble.c: New file.
1251         * Makefile.in (OFILES): Add disassemble.o.
1252         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1253         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
1254         binutils/configure.in.
1255
1256         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1257         opcode being examined.
1258
1259 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1260
1261         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1262         (insert_ral, insert_ram, insert_ras): New functions.
1263         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1264         RAS for store with update.
1265
1266 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1267
1268         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
1269         (edelsohn@npac.syr.edu).
1270
1271 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1272
1273         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1274         immediate argument.
1275
1276 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
1277
1278         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1279
1280 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1281
1282         * ppc-opc.c (powerpc_operands): The signedp field has been
1283         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
1284         instead.  Add new operand SISIGNOPT.
1285         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1286         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1287         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1288         than signedp field.
1289
1290 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1291
1292         * i386-dis.c (struct private):  Renamed to dis_private. `private'
1293         is a reserved word for dynix cc.
1294
1295 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1296
1297         * configure.in: Change error message to refer to bfd/config.bfd
1298         rather than bfd/configure.in.
1299
1300 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
1301
1302         * ppc-opc.c: Define POWER2 as short alias flag.
1303         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1304         fsqrt.
1305
1306 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1307
1308         * i960-dis.c (print_insn_i960): Don't read a second word for
1309         opcodes 0, 1, 2 and 3.
1310
1311 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1312
1313         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1314
1315 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1316
1317         * m68881-ext.c: Removed; no longer used.
1318         * Makefile.in: Changed accordingly.
1319
1320         * m68k-dis.c (ext_format_68881): Don't declare.
1321         (print_insn_m68k): If an instruction uses place 'i', it uses at
1322         least four fixed bytes.
1323         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
1324         extended float, convert to double using floatformat_to_double, not
1325         ieee_extended_to_double, and fetch the data before converting it.
1326
1327 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1328
1329         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
1330         davidj@ICSI.Berkeley.EDU (David Johnson).
1331
1332 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1333
1334         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1335         PowerPC uses bdnz[l][a].
1336
1337 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1338
1339         * dis-buf.c, i386-dis.c:  Include sysdep.h.
1340
1341 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1342
1343         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1344
1345         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1346         by Motorola PowerPC 601 with PPC_OPCODE_601.
1347         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1348         Disassemble Motorola PowerPC 601 instructions as well as normal
1349         PowerPC instructions.
1350
1351 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1352
1353         * i960-dis.c (reg, mem): Just use a static array instead of
1354         calling xmalloc.
1355
1356 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1357
1358         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1359         condition name index if this is for a negated condition.
1360
1361         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1362         Floating point format for 'H' operand is backwards from normal
1363         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
1364         operands (fmpyadd and fmpysub), handle bizarre register
1365         translation correctly for single precision format.
1366
1367         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1368         or 'I' operands if the next format specifier is 'M' (fcmp
1369         condition completer).
1370
1371 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1372
1373         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1374         single number giving a bitmask for the MB and ME fields of an M
1375         form instruction.  Change NB to accept 32, and turn it into 0;
1376         also turn 0 into 32 when disassembling.  Seperated SH from NB.
1377         (insert_mbe, extract_mbe): New functions.
1378         (insert_nb, extract_nb): New functions.
1379         (SC_MASK): Mask out SA and LK bits.
1380         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1381         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
1382         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
1383         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1384         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1385         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
1386         (powerpc_macros): Define table of macro definitions.
1387         (powerpc_num_macros): Define.
1388
1389         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1390         if PPC_OPERAND_NEXT is set.
1391
1392 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1393
1394         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1395         char.  Retrieve contents using bfd_getl32 instead of shifting.
1396
1397 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1398
1399         * ppc-opc.c: New file.  Opcode table for PowerPC, including
1400         opcodes for POWER (RS/6000).
1401         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
1402         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1403         (CFILES): Add ppc-dis.c.
1404         (ppc-dis.o, ppc-opc.o): New targets.
1405         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1406
1407 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1408
1409         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1410         No space before 'u', 'f', or 'N'.
1411
1412 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
1413
1414         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1415         farther than we should.
1416
1417         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1418
1419 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1420
1421         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1422
1423 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1424
1425         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1426         needs it, to prevent reading past the end of a section.
1427
1428 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1429
1430         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1431         Removed t,A case for la; always use t,A(b) case.
1432
1433 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1434
1435         From Ted Lemen <mellon@pepper.ncd.com>
1436         * mips-dis.c (print_insn_arg): Handle 'k'.
1437         * mips-opc.c: Make cache use k, not t.
1438
1439 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1440
1441         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
1442         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1443         FLOAT_FORMAT_CODE to put out floating point register names.
1444
1445 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1446
1447         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1448
1449 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1450
1451         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1452
1453 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1454
1455         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1456         larger than 32.  Moved dsxx32 variants first for disassembler.
1457
1458 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1459
1460         * z8kgen.c, z8k-opc.h: Add full lda information.
1461
1462 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
1463
1464         * hppa-dis.c (print_insn_hppa): Do not emit a space after
1465         movb instructions.  Any necessary space will be emitted by
1466         the code to handle nullification completers.
1467
1468 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1469
1470         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1471
1472 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1473
1474         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
1475         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
1476
1477 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1478
1479         * mips-opc.c: Correct lwu opcode value (book had it wrong).
1480
1481 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1482
1483         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1484         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1485
1486 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1487
1488         * m88k-dis.c (m88kdis): comment change.  Remove space after
1489           printing mnemonic.
1490           (printop): handle new arg types DEC and XREG for m88110.
1491
1492 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
1493
1494         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1495         type for absolute branch addresses.  Delete special
1496         "ble" and "be" code in 'W' operand code.
1497
1498 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1499
1500         * mips-opc.c: Set hazard information correctly for branch
1501         likely instructions.
1502
1503 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1504
1505         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1506         info->fprintf_func for printing and info->print_address_func for
1507         address output.
1508
1509 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1510
1511         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1512
1513 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1514
1515         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1516         Corrected second case of "b" for disassembler.
1517
1518 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1519
1520         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1521         to BFD swapping routines to correspond to BFD name changes.
1522
1523 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1524
1525         * mips-opc.c: Change div machine instruction to be z,s,t rather
1526         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1527         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1528         rem and remu which generates only the corresponding div
1529         instruction.  This is for compatibility with the MIPS assembler,
1530         which only generates the simple machine instruction when an
1531         explicit destination of $0 is used.
1532         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1533
1534 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1535
1536         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1537         WR_31 hazard for bal, bgezal, bltzal.
1538
1539 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1540
1541         * hppa-dis.c (print_insn_hppa): Use print function
1542         from within the disassemble_info, not fprintf_filtered.
1543
1544 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1545
1546         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1547         Law, law@cs.utah.edu.)
1548
1549 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1550
1551         * mips-opc.c ("absu"): Removed.
1552         ("dabs"): Added.
1553
1554 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1555
1556         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1557         Changed hazard information to distinguish between memory load
1558         delays and coprocessor load delays.
1559
1560 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1561
1562         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1563
1564 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1565
1566         * configure.in: Don't pass cpu to config.bfd.
1567
1568 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1569
1570         * m88k-dis.c (m88kdis): Make class unsigned.
1571
1572 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1573
1574         * alpha-dis.c (print_insn_alpha): One branch format case was
1575         missing the instruction name.
1576
1577 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1578
1579         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1580         Add the arch-specific auxiliary files.
1581         (OFILES): Remove the arch-specific auxiliary files
1582         and use BFD_MACHINES instead of DIS_LIBS.
1583         * configure.in: Set BFD_MACHINES based on --with-targets option.
1584
1585 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1586
1587         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1588         for swc1.
1589
1590 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1591
1592         * sparc-opc.c: Change CONST to const to deal with gcc
1593         -Dconst=__const -traditional.
1594
1595 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1596
1597         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1598         coprocessor instructions out of #if 0, and made them use new
1599         argument type "C".
1600
1601 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1602
1603         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1604
1605 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1606
1607         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1608         instruction, for use by the disassembler.
1609
1610         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1611         hand-coded sign extensions that depended on 32-bit host ints.
1612         FIXME, we still depend on big-endian host bitfield ordering.
1613         (sparc_print_insn):  Set the insn_info_valid field, and the
1614         other fields that describe the instruction being printed.
1615
1616 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1617
1618         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1619         `jmp' instead of just one of them.
1620
1621 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1622
1623         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1624         (fput_fp_reg_r): Renamed from fput_reg_r.
1625         (fput_fp_reg): New function.
1626         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1627
1628         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1629
1630         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1631
1632 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1633
1634         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1635
1636         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1637         don't output a space.
1638
1639         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1640
1641 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1642
1643         * mips-opc.c: New file, containing opcode table from
1644         ../include/opcode/mips.h.
1645         * Makefile.in: Add it.
1646
1647 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1648
1649         * m88k-dis.c: New file, moved in from gdb and changed to use the
1650         new dis-asm.h disassembler interface.
1651         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1652         (m88k-dis.o): New target.
1653
1654 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1655
1656         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1657         argument string const char * to correspond to opcode/mips.h.
1658
1659 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1660
1661         * mips-dis.c: Updated to account for name changes in new version
1662         of opcode/mips.h.
1663         * Makefile.in: Added header file dependencies.
1664
1665 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1666
1667         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1668
1669 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1670
1671         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1672         extend, rather than shifts.
1673
1674 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1675
1676         * Makefile.in: Undo 15 June change.
1677
1678 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1679
1680         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1681         or error code.
1682         * m68k-dis.c:  Re-write to detect invalid operands before
1683         printing anything, so we can handle this the same way we
1684         handle invalid opcodes.
1685
1686 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1687
1688         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1689
1690 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1691
1692         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1693         header files.
1694
1695 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1696
1697         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1698
1699         * configure.in: Do make sysdep.h link.
1700         * Makefile.in: Search ../include.  Don't search ../bfd.
1701
1702 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1703
1704         Changes from Jeff Law, law@cs.utah.edu:
1705         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1706         Do not print a space before the completers specified by
1707         'a' and 'd'.
1708
1709 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1710
1711         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1712         defined, since gdb has been fixed.
1713
1714         Changes from Jeff Law, law@cs.utah.edu:
1715         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1716         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1717         be a *disassemble_info, not a *FILE.
1718         * hppa-dis.c: Support 'd', '!', and 'a'.
1719         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1720         * hppa-dis.c: Delete cases which are no longer needed.
1721
1722 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1723
1724         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1725
1726 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1727
1728         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1729         H8/300-H opcodes.
1730
1731 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1732
1733         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1734         * configure.in:  No longer need to configure to get sysdep.h.
1735
1736 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1737
1738         * Patches from Jeffrey Law <law@cs.utah.edu>.
1739         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1740         templates for 1.1 FP computational instructions.
1741
1742 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1743
1744         * h8500-dis.c (print_insn_h8500): Address argument is type
1745         bfd_vma.
1746         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1747         Ditto.
1748
1749         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1750         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1751
1752         * sparc-dis.c (compare_opcodes): Move static declaration to
1753         top-level.
1754
1755 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1756
1757         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1758         instruction, remove unimp hack from 'l' argument.
1759
1760 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1761
1762         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1763         happy.
1764
1765 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1766
1767         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1768         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1769         instructions.
1770
1771 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1772
1773         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1774         arrays of string pointers to 2-d arrays of chars, to save
1775         space.
1776
1777 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1778
1779         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1780         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1781
1782 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1783
1784         * hppa-dis.c: New file from Utah, adapted to new disassembler
1785         calling interface.
1786         * Makefile.in: Include it.
1787
1788 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1789
1790         * sh-dis.c, sh-opc.h: New files.
1791
1792 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1793
1794         * alpha-dis.c, alpha-opc.h: New files.
1795
1796 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1797
1798         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1799         value.
1800
1801 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1802
1803         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1804
1805 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1806
1807         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1808         const.
1809
1810 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1811
1812         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1813         and double percent signs a few places.
1814
1815         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1816
1817         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1818         Use info->print_address_func not print_address.
1819
1820         * dis-buf.c (generic_print_address): New function.
1821
1822 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1823
1824         * Makefile.in: Add sparc-dis.c.
1825         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1826         From GDB:
1827             Add `add' instruction to the set that get checked
1828             for a preceding `sethi' in order to print an absolute address.
1829             * (print_insn):  Disassembly prefers real instructions.
1830             (is_delayed_branch):  Speed up.
1831             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1832             Still missing some float ops, and needs testing.
1833             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1834             F_ALIAS.  Use printf, not fprintf, when not passing a file
1835             pointer...
1836             (compare_opcodes): Check that identical instructions have
1837             identical opcodes, complain otherwise.
1838         From binutils:
1839             * New 'm' arg.
1840             * Include reg_names.
1841         From neither:
1842             Use dis-asm.h/read_memory_func interface.
1843
1844 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1845
1846         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1847           deliberately return non-zero to setjmp from longjmp.  Otherwise
1848           this code fails to compile.
1849
1850 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1851
1852         * m68k-dis.c:  Fix prototype for fetch_arg().
1853
1854 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1855
1856         * dis-buf.c: New file, for new read_memory_func interface.
1857         Makefile.in (OFILES): Include it.
1858         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1859         Use new read_memory_func interface.
1860
1861 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1862
1863         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1864         * h8500-opc.h: Fix couple of opcodes.
1865
1866 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1867
1868         * Makefile.in: add dvi & installcheck targets
1869
1870 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1871
1872         * Makefile.in:  Update for h8500-dis.c.
1873
1874 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1875
1876         * h8500-dis.c, h8500-opc.h: New files
1877
1878 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1879
1880         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1881         ../include/dis-asm.h.
1882         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1883         and ../gdb/m68k-pinsn.c).
1884         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1885         and ../gdb/i386-pinsn.c).
1886         * m68881-ext.c:  New file.  Moved definition of
1887         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1888         * Makefile.in:  Adjust for new files.
1889         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1890         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1891         can be dis-assembled.
1892
1893 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1894
1895         * mips-dis.c (print_insn_arg): Now returns void.
1896
1897 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1898
1899         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1900         files that use the macros.
1901
1902 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1903
1904         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1905         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1906         (CFILES): Added mips-dis.c.
1907
1908 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1909
1910         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1911         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1912
1913 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1914
1915         * Makefile.in:  Improve *clean rules.
1916         * configure.in:  Allow a default host.
1917
1918 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1919
1920         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1921         files include other sysdep files
1922
1923 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1924
1925         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1926
1927 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1928
1929         * configure.in:  For host support, use ../bfd/configure.host
1930         so it stays in sync with the ../bfd/hosts database.
1931
1932 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1933
1934         * configure.in: use cpu-vendor-os triple instead of nested cases
1935
1936 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1937
1938         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1939         *always* the wrong one.
1940
1941 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1942
1943         * z8kgen.c: added copyright info
1944
1945 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1946
1947         * z8k-dis.c (unparse_instr): prettier tabs
1948         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1949
1950 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1951
1952         * configure.in:  Add ncr* configuration.
1953         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1954         picayune ANSI compilers happy.
1955
1956 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1957
1958         * configure.in (i386):  Make i386 and i486 synonymous for now.
1959         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1960
1961 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1962
1963         * Makefile.in (install): Fix typo.
1964
1965 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1966
1967         * Makefile.in (make):  Remove obsolete crud.
1968         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1969
1970 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1971
1972         * Makefile.in: since there are no SUBDIRS, remove rule and
1973         references of subdir_do.
1974
1975 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1976
1977         * Makefile.in (install): Get the library name right here too.
1978         Don't install bfd.h, since it's unrelated to this library.  No
1979         subdirs to recurse into, either.
1980         (CFILES): The source file has a .c suffix, not .o.
1981
1982         * sparc-opc.c: New file, moved from BFD.
1983         * Makefile.in (OFILES): Build it.
1984
1985 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1986
1987         * z8k-dis.c: fixed forward refferences of some declarations.
1988
1989 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1990
1991         * Makefile.in: get the name of the library right
1992
1993 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1994
1995         * z8k-dis.c: knows how to disassemble z8k stuff
1996         * z8k-opc.h: new file full of z8000 opcodes
1997
1998 \f
1999 Local Variables:
2000 version-control: never
2001 End: