2 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
4 * v850-dis.c (disassemble): Only signed extend values that are not
5 returned by extract functions.
6 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
8 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
10 * v850-opc.c: Update comments. Remove use of
11 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
13 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
15 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
18 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
20 * configure: Rebuilt with latest devo autoconf for NT support.
22 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
24 * v850-dis.c (disassemble): Use curly brace syntax for register
27 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
28 where r0 is being used as a destination register.
31 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
33 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
37 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
39 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
40 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
41 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
42 Add insns to access SGR and DBR.
43 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
46 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
48 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
50 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
52 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
54 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
59 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
61 * configure (cgen_files): Add support for v850e target.
62 * configure.in (cgen_files): Add support for v850e target.
66 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
68 * configure (cgen_files): Add support for v850eq target.
69 * configure.in (cgen_files): Add support for v850eq target.
72 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
74 * configure.in (bfd_arc_arch): Add.
76 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
77 * Makefile.in: Rebuild.
78 * arc-dis.c, arc-opc.c: New files.
79 * disassemble.c (ARCH_all): Define ARCH_arc.
80 (disassembler): Add ARC support.
83 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
86 * .Sanitize (Do-first): Add support for keep-v850eq command line
89 * v850-dis.c (disassemble): Add support for v850EQ instructions.
91 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
92 (v850_opcodes): Add v850EQ instructions.
95 * .Sanitize (Do-first): Add support for keep-v850e command line
98 * v850-dis.c (disassemble): Add support for v850E instructions.
100 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
101 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
102 insert_spe, extract_spe): New Functions.
103 (v850_opcodes): Add v850E instructions.
106 * v850-opc.c: Reorganised and re-layed out to improve readability
111 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
113 * configure: Rebuild with autoconf 2.12.1.
115 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
117 * aclocal.m4, configure: Rebuild with new automake patches.
119 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
121 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
122 * acinclude.m4: Just include acinclude.m4 from BFD.
123 * aclocal.m4, configure: Rebuild.
125 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
127 * Makefile.am: New file, based on old Makefile.in.
128 * acconfig.h: New file.
129 * acinclude.m4: New file.
130 * stamp-h.in: New file.
131 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
132 Removed shared library handling; now handled by libtool. Replace
133 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
134 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
135 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
136 handling in AC_OUTPUT.
137 * dep-in.sed: Change .o to .lo.
138 * Makefile.in: Now built with automake.
139 * aclocal.m4: Now built with aclocal.
140 * config.in, configure: Rebuild.
142 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
144 * mips-opc.c: Fix typo/thinko in "eret" instruction.
147 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
149 * mips-opc.c: Fix coding of mtsa.
152 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
154 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
156 * sparc-dis.c (sorted_opcodes): New static local.
157 (struct opcode_hash): `opcode' is pointer to const element.
158 (build_hash): First arg is now table of sorted pointers.
159 (print_insn_sparc): Sort opcodes by sorting table of pointers.
160 (compare_opcodes): Update.
162 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
164 * cgen-opc.c: #include <ctype.h>.
165 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
166 Handle case insensitive hashing.
167 (hash_keyword_value): Change type of `value' to unsigned int.
169 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
171 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
172 precision FP, mark it as such. Likewise for double precision
173 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
176 (mips_builtin_opcodes): Remove non-existant r5900 instructions
180 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
182 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
183 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
186 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
188 * ppc-opc.c (extract_nsi): make unsigned expression signed before
190 (UNUSED): remove one level of parens, so MSVC doesn't choke on
191 nesting depth when all the macros are expanded.
193 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
195 * sparc-opc.c: The fcmp v9a instructions take an integer register
196 as a destination, not a floating point register. From Christian
197 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
199 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
201 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
202 syntax. From Roman Hodek
203 <rnhodek@faui22c.informatik.uni-erlangen.de>.
205 * i386-dis.c (twobyte_has_modrm): Fix pand.
207 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
209 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
211 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
213 * arm-dis.c: Add prototypes for arm_decode_shift and
216 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
218 * mips-opc.c: Add r3900 insns.
220 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
222 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
223 print delay slot instructions on the same line. When using a PC
224 relative load, add a comment with the value being loaded if it can
227 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
229 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
230 to pushS/popS for segment regs and byte constant so that
231 pushw/popw printed when in 16 bit data mode.
233 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
234 print cbtw, cwtd in 16 bit data mode.
235 * i386-dis.c (putop): extra case W to support above.
237 * i386-dis.c (print_insn_x86): print addr32 prefix when given
238 address size prefix in 16 bit address mode.
240 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
242 * sh-dis.c: Reindent. Rename local variable fprintf to
245 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
247 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
249 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
251 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
253 * mips16-opc.c (mip16_opcodes): same.
255 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
257 * m68k-opc.c (moveb): Change $d to %d.
259 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
261 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
262 (twobyte_has_modrm): Likewise.
264 (OP_MMX, OP_EM, OP_MS): New static functions.
266 * i386-dis.c: Revert patch of April 4. The output now matches
269 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
271 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
274 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
276 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
278 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
280 * Makefile.in (install): Depend upon installdirs.
281 (installdirs): New target.
283 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
285 From Thomas Graichen <graichen@rzpd.de>:
286 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
287 * configure: Rebuild.
289 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
291 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
292 Delete string{,s}.h support.
294 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
296 * cgen-asm.c (cgen_parse_operand_fn): New global.
297 (cgen_parse_{{,un}signed_integer,address}): Update call to
298 cgen_parse_operand_fn.
299 (cgen_init_parse_operand): New function.
300 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
301 from cgen_asm_init_parse.
302 (m32r_cgen_assemble_insn): New operand `errmsg'.
303 Delete call to as_bad, return error message to caller.
304 (m32r_cgen_asm_hash_keywords): #if 0 out.
306 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
308 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
310 [case 'J']: Fix typo in register name.
312 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
314 * configure.in: Substitute SHLIB_LIBS.
315 * configure: Rebuild.
316 * Makefile.in (SHLIB_LIBS): New variable.
317 ($(SHLIB)): Use $(SHLIB_LIBS).
319 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
321 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
323 * cgen-opc.c (hash_keyword_name): Improve algorithm.
325 * disassemble.c (disassembler): Handle m32r.
327 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
329 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
330 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
331 * Makefile.in (CFILES): Add them.
332 (ALL_MACHINES): Add them.
333 (dependencies): Regenerate.
334 * configure.in (cgen_files): New variable.
335 (bfd_m32r_arch): Add entry.
336 * configure: Regenerate.
338 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
340 * configure.in: Correct file names for bfd_mn10[23]00_arch.
341 * configure: Rebuild.
343 * Makefile.in: Rebuild dependencies.
345 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
347 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
350 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
352 * Branched binutils 2.8.
354 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
356 * m10200-dis.c: Rename from mn10200-dis.c.
357 * m10200-opc.c: Rename from mn10200-opc.c.
358 * m10300-dis.c: Rename from mn10300-dis.c
359 * m10300-opc.c: Rename from mn10300-opc.c.
360 * Makefile.in: Update accordingly.
362 * mips16-opc.c: Add mul and dmul macros.
364 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
366 * makefile.vms: Update CFLAGS, add clean target.
368 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
370 * mips-opc.c: Add "wait". From Ralf Baechle
371 <ralf@gnu.ai.mit.edu>.
373 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
374 * configure, config.in: Rebuild.
375 * sysdep.h: Include <stdlib.h> if it exists.
376 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
378 * Makefile.in: Rebuild dependencies.
380 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
382 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
383 Andrew Bray <andy@madhouse.demon.co.uk>.
385 * mips-opc.c: Add cast when setting mips_opcodes.
388 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
390 * v850-dis.c (disassemble): Fix sign extension problem.
391 * v850-opc.c (extract_d*): Fix sign extension problems to make
392 disassembly calculate branch offsets correctly.
395 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
397 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
399 * mips-opc.c: Add dctr and dctw.
402 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
404 * d30v-dis.c (print_insn): Change the way signed constants
407 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
409 * Makefile.in (BFD_H): New variable.
410 (HFILES): New variable.
411 (CFILES): Add all C files.
412 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
413 Delete old dependencies, and build new ones.
414 * dep-in.sed: New file.
416 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
418 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
420 start-sanitize-coldfire
421 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
423 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
426 end-sanitize-coldfire
427 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
429 * mn10200-opc.c: Change "trap" to "syscall".
430 * mn10300-opc.c: Add new "syscall" instruction.
432 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
434 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
435 mulul insns on the coldfire.
437 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
439 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
440 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
441 (print_insn_little_arm): Likewise.
443 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
445 Based on patches from H.J. Lu <hjl@lucon.org>:
446 * i386-dis.c (fetch_data): Add prototype.
447 * m68k-dis.c (fetch_data): Add prototype.
448 (dummy_print_address): Add prototype. Make static.
449 * ppc-opc.c (valid_bo): Add prototype.
450 * sparc-dis.c (build_hash_table): Add prototype.
451 (is_delayed_branch, compute_arch_mask): Add prototypes.
452 (print_insn_sparc): Make several local variables const.
453 (compare_opcodes): Change arguments to const PTR. Add prototype.
454 * sparc-opc.c (arg): Change name field to be const.
455 (lookup_name, lookup_value): Add prototypes. Change table and
456 name parameters to be const.
457 (sparc_encode_asi): Change name parameter to be const.
458 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
459 (sparc_encode_sparclet_cpreg): Likewise.
460 (sparc_decode_asi): Change return type to be const.
461 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
462 (sparc_decode_sparclet_cpreg): Likewise.
464 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
466 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
467 Solaris doesn't like the combined options, and the -f is
469 (stamp-tshlink, install): Likewise.
471 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
473 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
476 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
478 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
480 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
482 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
485 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
487 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
490 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
492 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
494 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
496 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
499 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
501 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
502 floatformat_to_double to make portable.
503 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
506 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
508 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
509 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
511 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
513 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
514 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
517 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
519 * tic80-opc.c (LSI_SCALED): Renamed from this ...
520 (OFF_SL_BR_SCALED): ... to this, and added the flag
521 TIC80_OPERAND_BASEREL to the flags word.
522 (tic80_opcodes): Replace all occurances of LSI_SCALED with
526 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
528 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
529 Change mips_opcodes from const array to a pointer,
530 and change bfd_mips_num_opcodes from const int to int,
531 so that we can increase the size of the mips opcodes table
535 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
537 * tic80-opc.c (tic80_predefined_symbols): Revert change to
538 store BITNUM values in the table in one's complement form
539 to match behavior when assembler is given a raw numeric
540 value for a BITNUM operand.
541 * tic80-dis.c (print_operand_bitnum): Ditto.
545 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
547 * d30v-opc.c: Removed references to FLAG_X.
550 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
552 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
555 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
557 * Makefile.in: Added d30v object files.
558 * configure: (bfd_d30v_arch) Rebuilt.
559 * configure.in: (bfd_d30v_arch) Added new case.
560 * d30v-dis.c: New file.
561 * d30v-opc.c: New file.
562 * disassemble.c (disassembler) Add entry for d30v.
566 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
568 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
569 representations for the floating point BITNUM values.
571 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
573 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
574 in the table in one's complement form, as they appear in the
576 (tic80_symbol_to_value): Use macros to access predefined
578 (tic80_value_to_symbol): Ditto.
579 (tic80_next_predefined_symbol): New function.
580 * tic80-dis.c (print_operand_bitnum): Remove code that did
581 one's complement for BITNUM values.
585 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
587 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
590 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
592 * makefile.vms: Remove 8 bit characters. Update to latest
595 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
597 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
599 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
601 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
602 (IMM24_PCREL): Likewise.
604 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
606 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
607 address for an extended PC relative instruction that is not a
610 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
612 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
616 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
618 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
619 (tic80_opcodes): Sort entries so that long immediate forms
620 come after short immediate forms, making it easier for
621 assembler to select the right one for a given operand.
624 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
626 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
628 (print_insn_mips16): Likewise.
631 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
633 * mips-opc.c: add r5900.
637 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
639 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
640 a symbol class that restricts translation to just that
641 class (general register, condition code, etc).
643 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
645 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
646 and REG_DEST_E for register operands that have to be
647 an even numbered register. Add REG_FPA for operands that
648 are one of the floating point accumulator registers.
649 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
650 (tic80_opcodes): Change entries that need even numbered
651 register operands to use the new operand table entries.
652 Add "or" entries that are identical to "or.tt" entries.
655 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
657 * mips16-opc.c: Add new cases of exit instruction for
659 * mips-dis.c (print_mips16_insn_arg): Display floating point
660 registers in operands of exit instruction. Print `$' before
661 register names in operands of entry and exit instructions.
664 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
666 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
667 pairs for all predefined symbols recognized by the assembler.
668 Also used by the disassembling routines.
669 (tic80_symbol_to_value): New function.
670 (tic80_value_to_symbol): New function.
671 * tic80-dis.c (print_operand_control_register,
672 print_operand_condition_code, print_operand_bitnum):
673 Remove private tables and use tic80_value_to_symbol function.
676 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
678 * d10v-dis.c (print_operand): Change address printing
679 to correctly handle PC wrapping. Fixes PR11490.
681 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
683 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
686 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
688 * mips-dis.c (print_insn_mips16): Set insn_info information.
689 (print_mips16_insn_arg): Likewise.
691 * mips-dis.c (print_insn_mips16): Better handling of an extend
692 opcode followed by an instruction which can not be extended.
694 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
696 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
697 coldfire moveb instruction to not allow an address register as
698 destination. Although the documentation does not indicate that
699 this is invalid, experiments uncovered unexpected behavior.
700 Added a comment explaining the situation. Thanks to Andreas
701 Schwab for pointing this out to me.
704 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
706 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
707 entries are presorted so that entries with the same mnemonic are
708 adjacent to each other in the table. Sort the entries for each
709 instruction so that this is true.
712 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
714 * m68k-dis.c: Include <libiberty.h>.
715 (print_insn_m68k): Sort the opcode table on the most significant
716 nibble of the opcode.
719 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
721 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
722 "vsub", "vst", "xnor", and "xor" instructions.
723 (V_a1): Renamed from V_a, msb of accumulator reg number.
724 (V_a0): Add macro, lsb of accumulator reg number.
726 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
728 * tic80-dis.c (print_insn_tic80): Broke excessively long
729 function up into several smaller ones and arranged for
730 the instruction printing function to be callable recursively
731 to print vector instructions that have both a load and a
732 math instruction packed into a single opcode.
733 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
734 to explain why it comes after the other vector opcodes.
737 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
739 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
740 move insns to handle immediate operands.
742 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
744 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
745 fix operand mask in the "moveml" entries for the coldfire.
748 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
750 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
751 New macros for building vector instruction opcodes.
752 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
753 FMT_LI, which were unused. The field is now a flags field.
754 Remove some opcodes that are possible, but illegal, such
755 as long immediate instructions with doubles for immediate
756 values. Add "vadd" and "vld" instructions.
758 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
760 * tic80-opc.c (tic80_operands): Reorder some table entries to make
761 the order more logical. Move the shift alias instructions ("rotl",
762 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
763 interspersed with the regular sr.x and sl.x instructions. Add
764 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
765 "sub", "subu", "swcr", and "trap".
767 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
769 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
770 (OFF_SL_PC): Renamed from OFF_SL.
771 (OFF_SS_BR): New operand type for base relative operand.
772 (OFF_SL_BR): New operand type for base relative operand.
773 (REG_BASE): New operand type for base register operand.
774 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
775 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
776 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
778 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
779 10 char field, padded with spaces on rhs, rather than a string
780 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
781 than old TIC80_OPERAND_RELATIVE. Add support for new
782 TIC80_OPERAND_BASEREL flag bit.
784 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
786 * tic80-dis.c (print_insn_tic80): Print floating point operands
788 * tic80-opc.c (SPFI): Add single precision floating point
789 immediate operand type.
790 (ROTATE): Add rotate operand type for shifts.
791 (ENDMASK): Add for shifts.
792 (n): Macro for the 'n' bit.
793 (i): Macro for the 'i' bit.
794 (PD): Macro for the 'PD' field.
795 (P2): Macro for the 'P2' field.
796 (P1): Macro for the 'P1' field.
797 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
801 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
803 * mn10200-dis.c (disassemble): Mask off unwanted bits after
804 adding in current address for pc-relative operands.
807 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
809 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
810 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
811 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
812 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
813 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
814 REG_BASE_M_SI, REG_BASE_M_LI respectively.
815 (REG_SCALED, LSI_SCALED): New operand types.
816 (E): New macro for 'E' bit at bit 27.
817 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
818 opcodes, including the various size flavors (b,h,w,d) for
819 the direct load and store instructions.
821 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
823 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
825 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
826 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
827 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
828 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
829 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
830 masks with "MASK_* & ~M_*" to get the M bit reset.
831 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
833 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
835 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
836 correctly. Add support for printing TIC80_OPERAND_BITNUM and
837 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
839 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
840 CC, SICR, and LICR table entries.
841 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
842 "bcnd", and "brcr" opcodes.
845 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
847 * ppc-opc.c (powerpc_operands): Make comment match the
848 actual fields (no shift field).
849 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
851 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
852 partial implementation, work in progress.
853 * tic80-opc.c (tic80_operands): Begin construction operands table.
854 (tic80_opcodes): Continue populating opcodes table and start
855 filling in the operand indices.
856 (tic80_num_opcodes): Add this.
859 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
861 * m68k-opc.c: Add #B case for moveq.
863 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
865 * mn10300-dis.c (disassemble): Make sure all variables are initialized
866 before they are used.
869 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
871 * v850-opc.c (v850_opcodes): Put curly-braces around operands
872 for "breakpoint" instruction.
875 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
877 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
878 (dep): Use ALL_CFLAGS rather than CFLAGS.
881 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
883 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
887 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
889 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
891 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
894 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
896 * mips16-opc.c: Add "abs".
899 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
901 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
902 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
903 (disassembler): Add bfd_arch_tic80 support to set disassemble
905 * tic80-dis.c (print_insn_tic80): Add stub.
907 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
909 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
910 * configure: Regenerate with autoconf.
911 * tic80-dis.c: Add file.
912 * tic80-opc.c: Add file.
915 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
917 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
919 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
921 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
922 (mn10200_opcodes): Use it for some logicals and btst insns.
923 Add "break" and "trap" instructions.
925 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
927 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
929 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
931 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
932 relative load or add now depends upon whether the instruction is
935 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
937 * mn10200-dis.c: Finish writing disassembler.
938 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
939 Fix mask for "jmp (an)".
941 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
942 handle endianness issues for mn10300.
944 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
946 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
948 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
949 instruction. Fix opcode field for "movb (imm24),dn".
951 * mn10200-opc.c (mn10200_operands): Fix insertion position
954 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
956 * mn10200-opc.c: Create mn10200 opcode table.
957 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
958 but moving along nicely.
960 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
962 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
964 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
966 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
967 specifiers for fmovem* instructions.
969 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
971 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
973 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
975 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
978 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
980 * mn10300-opc.c: Add some comments explaining the various
983 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
985 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
987 * m68k-dis.c (print_insn_arg): Handle new < and > operand
990 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
991 operand specifiers in fmovm* instructions.
993 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
995 * ppc-opc.c (insert_li): Give an error if the offset has the two
996 least significant bits set.
998 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1000 * mips-dis.c (print_insn_mips16): Separate the instruction from
1001 the arguments with a tab, not a space.
1003 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1005 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1008 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1011 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1013 * configure: Rebuild with autoconf 2.12.
1015 Add support for mips16 (16 bit MIPS implementation):
1016 * mips16-opc.c: New file.
1017 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1018 (mips16_reg_names): New static array.
1019 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1020 after seeing a 16 bit symbol.
1021 (print_insn_little_mips): Likewise.
1022 (print_insn_mips16): New static function.
1023 (print_mips16_insn_arg): New static function.
1024 * mips-opc.c: Add jalx instruction.
1025 * Makefile.in (mips16-opc.o): New target.
1026 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1027 * configure: Rebuild.
1029 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1031 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1032 operand specifiers in *save, *restore and movem* instructions.
1034 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1037 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1038 register operands for immediate arithmetic, not, neg, negx, and
1039 set according to condition instructions.
1041 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1042 specifier of the effective-address operand in immediate forms of
1043 arithmetic instructions. The specifier for the immediate operand
1044 notes how and where the constant will be stored.
1046 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1048 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1051 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1054 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1056 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1058 * mn10300-dis.c (disassemble): Handle register lists.
1060 * mn10300-opc.c: Fix handling of register list operand for
1061 "call", "ret", and "rets" instructions.
1063 * mn10300-dis.c (disassemble): Print PC-relative and memory
1064 addresses symbolically if possible.
1065 * mn10300-opc.c: Distinguish between absolute memory addresses,
1066 pc-relative offsets & random immediates.
1068 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1070 (disassemble): Handle SPLIT and EXTENDED operands.
1072 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1074 * mn10300-dis.c: Rough cut at printing some operands.
1076 * mn10300-dis.c: Start working on disassembler support.
1077 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1079 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1081 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1083 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1085 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1087 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1089 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1090 register argument is calls and jmp instructions.
1092 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1094 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1095 getx operand. Fix opcode for mulqu imm,dn.
1097 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1099 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1100 in MN10300_OPERAND_SPLIT operands for how many bits
1101 appear in the basic insn word. Add IMM32_HIGH24,
1102 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1103 (mn10300_opcodes): Use new operands as needed.
1105 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1106 for bset, bclr, btst instructions.
1107 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1109 * mn10300-opc.c (mn10300_operands): Remove many redundant
1110 operands. Update opcode table as appropriate.
1111 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1112 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1114 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1116 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1117 operands (for indexed load/stores). Fix bitpos for DI
1118 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1119 few instructions that insert immediates/displacements in the
1120 middle of the instruction. Add IMM8E for 8 bit immediate in
1121 the extended part of an instruction.
1122 (mn10300_operands): Use new opcodes as appropriate.
1124 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1126 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1127 sequential so the assembler never parallelizes it with
1130 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1132 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1133 a data/address register that appears in register field 0
1134 and register field 1.
1135 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1137 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1139 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1140 standard disassembly.
1142 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1143 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1144 Recategorize PALcode instructions.
1147 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1149 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1152 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1154 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1155 there are no operand types.
1158 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1160 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1162 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1165 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1167 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1170 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1172 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1173 and sst.w instructions.
1175 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1179 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1181 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1184 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1186 * ppc-opc.c (PPCPWR2): Define.
1187 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1190 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1192 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1193 field for movhu instruction.
1196 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1197 cast value to "long" not "signed long" to keep hpux10
1201 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1203 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1206 * mn10300-opc.c (FMT*): Remove definitions.
1208 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1209 for shift-by-register opcodes.
1211 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1212 into [AD][MN][01] for encoding the position of the register
1215 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1217 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1218 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1220 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1222 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1223 Fix various typos. Add "PAREN" operand.
1224 (MEM, MEM2): Define.
1225 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1226 operands. Fix several typos.
1228 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1231 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1233 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1234 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1236 (mn10300_opcodes): Break opcode format out into its own field.
1237 Update many operand fields to deal with signed vs unsigned
1238 issues. Fix one or two typos in the "mov" instruction
1239 opcode, mask and/or operand fields.
1241 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1243 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1244 m68851 wasn't reset.
1246 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1248 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1249 all opcodes. Very rough cut at operands for all opcodes.
1251 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1254 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1256 * mn10200-opc.c, mn10300-opc.c: New files.
1257 * mn10200-dis.c, mn10300-dis.c: New files.
1258 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1259 * disassemble.c: Break mn10x00 support into 10200 and 10300
1261 * configure.in: Likewise.
1262 * configure: Rebuilt.
1264 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1266 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1268 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1270 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1272 * disassemble (ARCH_mn10x00): Define.
1273 (disassembler): Handle bfd_arch_mn10x00.
1274 * configure.in: Recognize bfd_mn10x00_arch.
1275 * configure: Rebuilt.
1277 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1279 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1280 accordingly. Don't declare functions using op_rtn.
1283 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1285 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1286 params to be more standard.
1287 * (disassemble): Print absolute addresses and symbolic names for
1288 branch and jump targets.
1289 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1291 * (v850_opcodes): Add breakpoint insn.
1294 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1296 * m68k-opc.c: Move the fmovemx data register cases before the
1297 other cases, so that they get recognized before the data register
1298 does gets treated as a degenerate register list.
1300 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1302 * mips-opc.c: Add a case for "div" and "divu" with two registers
1303 and a destination of $0.
1305 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1307 * mips-dis.c (print_insn_arg): Add prototype.
1308 (_print_insn_mips): Ditto.
1310 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1312 * mips-dis.c (print_insn_arg): Print condition code registers as
1315 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1317 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1320 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1322 * v850-dis.c (disassemble): Make static. Provide prototype.
1324 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1326 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1329 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1331 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1332 ']' characters into the output stream.
1333 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1334 Add "memop" field to all opcodes (for the disassembler).
1335 Reorder opcodes so that "nop" comes before "mov" and "jr"
1336 comes before "jarl".
1338 * v850-dis.c (print_insn_v850): Fix typo in last change.
1340 * v850-dis.c (print_insn_v850): Properly handle disassembling
1341 a two byte insn at the end of a memory region when the memory
1342 region's size is only two byte aligned.
1344 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1346 * v850-dis.c (v850_reg_names): Define.
1347 (v850_sreg_names, v850_cc_names): Likewise.
1348 (disassemble): Very rough cut at printing operands (unformatted).
1350 * v850-opc.c (BOP_MASK): Fix.
1351 (v850_opcodes): Fix mask for jarl and jr.
1353 * v850-dis.c: New file. Skeleton for disassembler support.
1354 * Makefile.in Remove v850 references, they're not needed here
1355 and they weren't being sanitized away.
1356 * configure.in: Add v850-dis.o when building v850 toolchains.
1357 * configure: Rebuilt.
1358 * disassemble.c (disassembler): Call v850 disassembler.
1360 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1361 (insert_d8_6, extract_d8_6): New functions.
1362 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1363 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1365 (IF4A, IF4B): Use "D7" instead of "D7S".
1366 (IF4C, IF4D): Use "D8_7" instead of "D8".
1367 (IF4E, IF4F): New. Use "D8_6".
1368 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1369 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1371 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1372 (v850_operands): Change D16 to D16_15, use special insert/extract
1373 routines. New new D16 that uses the generic insert/extract code.
1374 (IF7A, IF7B): Use D16_15.
1375 (IF7C, IF7D): New. Use D16.
1376 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1378 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1379 message. Issue an error if the branch offset is odd.
1381 * v850-opc.c: Add notes about needing special insert/extract
1382 for all the load/store insns, except "ld.b" and "st.b".
1384 * v850-opc.c (insert_d22, extract_d22): New functions.
1385 (v850_operands): Use insert_d22 and extract_d22 for
1387 (insert_d9): Fix range check.
1389 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1391 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1392 and set bits field to D9 and D22 operands.
1394 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1396 * v850-opc.c (v850_operands): Define SR2 operand.
1397 (v850_opcodes): "ldsr" uses R1,SR2.
1399 * v850-opc.c (v850_opcodes): Fix opcode specs for
1400 sld.w, sst.b, sst.h, sst.w, and nop.
1402 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1404 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1405 end of the opcode table.
1408 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1410 * d10v-opc.c (pre_defined_registers): Added register pairs,
1411 "r0-r1", "r2-r3", etc.
1414 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1416 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1417 Create I16U for an unsigned 16bit mmediate operand.
1418 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1420 * v850-opc.c (v850_operands): Define EP operand.
1421 (IF4A, IF4B, IF4C, IF4D): Use EP.
1423 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1424 with immediate operand, "movhi". Tweak "ldsr".
1426 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1427 correct. Get sld.[bhw] and sst.[bhw] closer.
1429 * v850-opc.c (v850_operands): "not" is a two byte insn
1431 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1433 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1435 * v850-opc.c (two): Get order of words correct.
1437 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1439 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1440 register source and destination operands.
1441 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1443 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1444 same thinko in "trap" opcode.
1446 * v850-opc.c (v850_opcodes): Add initializer for size field
1449 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1450 Add D8 for 8-bit unsigned field in short load/store insns.
1451 (IF4A, IF4D): These both need two registers.
1452 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1453 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1454 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1455 for "ldsr" and "stsr".
1456 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1459 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1460 short store word (sst.w).
1462 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1464 * v850-opc.c (v850_operands): Added insert and extract fields,
1465 pointers to functions that handle unusual operand encodings.
1467 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1469 * v850-opc.c (v850_opcodes): Enable "trap".
1471 * v850-opc.c (v850_opcodes): Fix order of displacement
1472 and register for "set1", "clr1", "not1", and "tst1".
1474 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1476 * v850-opc.c (v850_operands): Add "B3" support.
1477 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1480 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1482 * v850-opc.c: Close unterminated comment.
1484 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1486 * v850-opc.c (v850_operands): Add flags field.
1487 (v850_opcodes): add move opcodes.
1489 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1491 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1492 * configure: (bfd_v850v_arch) Add new case.
1493 * configure.in: (bfd_v850_arch) Add new case.
1494 * v850-opc.c: New file.
1497 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1499 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1501 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1503 * d10v-opc.c: Add additional information to the opcode
1504 table to help determinine which instructions can be done
1507 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1509 * mpw-make.sed: Update editing of include pathnames to be
1512 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1514 * arm-opc.h: Added "bx" instruction definition.
1516 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1518 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1520 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1522 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1524 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1526 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1528 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1530 * makefile.vms: Update for alpha-opc changes.
1532 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1534 * i386-dis.c (print_insn_i386): Actually return the correct value.
1535 (ONE, OP_ONE): #ifdef out; not used.
1537 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1539 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1540 Changed subi operand type to treat 0 as 16.
1542 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1544 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1547 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1549 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1550 memory transfer instructions. Add new format string entries %h and %s.
1551 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1554 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1556 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1557 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1559 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1561 * alpha-dis.c (print_insn_alpha_osf): Remove.
1562 (print_insn_alpha_vms): Remove.
1563 (print_insn_alpha): Make globally visible. Chose the register
1564 names based on info->flavour.
1565 * disassemble.c: Always return print_insn_alpha for the alpha.
1567 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1569 * d10v-dis.c (dis_long): Handle unknown opcodes.
1571 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1573 * d10v-opc.c: Changes to support signed and unsigned numbers.
1574 All instructions with the same name that have long and short forms
1575 now end in ".l" or ".s". Divs added.
1576 * d10v-dis.c: Changes to support signed and unsigned numbers.
1578 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1580 * d10v-dis.c: Change all functions to use info->print_address_func.
1582 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1584 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1585 move ccr/sr insns more strict so that the disassembler only
1586 selects them when the addressing mode is data register.
1588 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1589 * d10v-opc.c (pre_defined_registers): Declare.
1590 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1591 to pick a better name for the registers.
1593 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1595 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1596 operands for fexpand and fpmerge. From Christian Kuehnke
1597 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1599 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1601 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1602 print routine. Take new regnames and cpumask arguments.
1603 Kill the environment variable nonsense.
1604 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1605 (print_insn_alpha_vms): New function. Do VMS style regnames.
1606 * disassemble.c (disassembler): Test bfd flavour to pick
1607 between OSF and VMS routines. Default to OSF.
1609 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1611 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1612 * configure: Rebuild.
1613 * Makefile.in (install): Use @INSTALL_SHLIB@.
1615 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1617 * configure: (bfd_d10v_arch) Add new case.
1618 * configure.in: (bfd_d10v_arch) Add new case.
1619 * d10v-dis.c: New file.
1620 * d10v-opc.c: New file.
1621 * disassemble.c (disassembler) Add entry for d10v.
1623 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1625 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1626 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1628 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1630 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1631 distinguish between variants of the instruction set.
1632 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1633 distinguish between variants of the instruction set.
1635 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1637 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1638 the 8086 instruction set.
1639 * i386-dis.c: General cleanups. Make most things static. Add
1640 prototypes. Get rid of static variables aflags and dflags. Pass
1641 them as args (to almost everything).
1643 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1645 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1647 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1649 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1650 if the next arg is marked with SRC_IN_DST. Gross.
1652 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1653 we're looking for and find EXR.
1655 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1656 if we're looking for KBIT and we don't find it.
1658 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1661 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1662 3bit immediate operands.
1664 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1666 * Released binutils 2.7.
1668 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1669 <kkaempf@progis.ac-net.de>.
1671 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1673 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1675 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1677 * sparc-dis.c (print_insn_sparclite): New routine to print
1678 sparclite instructions.
1680 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1682 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1684 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1686 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1687 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1688 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1690 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1692 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1693 Use autoconf-set values.
1694 (docdir, oldincludedir): Removed.
1695 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1697 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1699 * alpha-opc.c: New file.
1700 * alpha-opc.h: Remove.
1701 * alpha-dis.c: Complete rewrite to use new opcode table.
1702 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1703 * configure: Rebuild with autoconf 2.10.
1704 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1705 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1707 (alpha-opc.o): New target.
1709 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1711 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1712 Set imm_added_to_rs1 even if the source and destination register
1715 * sparc-opc.c: Add some two operand forms of the wr instruction.
1717 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1719 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1722 * disassemble.c (disassembler): Handle H8/S.
1723 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1725 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1727 * sparc-opc.c: Add beq/teq as aliases for be/te.
1729 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1730 <sergei@msil.sps.mot.com>.
1732 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1734 * makefile.vms: New file.
1736 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1738 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1740 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1743 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1745 * i386-dis.c (OP_OFF): Call append_prefix.
1747 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1749 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1750 unsigned long to silence a warning from the Solaris PowerPC
1753 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1755 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1757 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1759 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1761 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1762 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1763 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1764 cpush, cpusha, cpull sparclet insns.
1766 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1768 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1770 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1772 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1773 Set F_FLOAT on other floating point instructions.
1775 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1777 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1779 (powerpc_opcodes): Add 860/821 specific SPRs.
1781 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1783 * configure.in: Permit --enable-shared to specify a list of
1784 directories. Set and substitute BFD_PICLIST.
1785 * configure: Rebuild.
1786 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1787 uses. Set to @BFD_PICLIST@.
1789 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1791 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1792 not "abs", which may be needed for the absolute in something
1793 like btst #0,@10:8. Print L_3 immediates separately from other
1794 immediates. Change ABSMOV reference to ABS8MEM.
1796 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1798 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1799 (current_arch_mask): New static global.
1800 (compute_arch_mask): New static function.
1801 (print_insn_sparc): Delete sparc_v9_p. New static local
1802 current_mach. Resort opcode table if current_mach changes.
1803 Generalize "insn not supported" test.
1804 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1805 Delete test for v9/!v9.
1806 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1808 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1809 (brfcx): Renamed to FBRX.
1810 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1811 coprocessor mnemonics are not supported on the sparclet).
1812 (condf): Renamed to CONDF.
1813 (SLCBCC2): Delete F_ALIAS flag.
1815 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1817 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1818 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1820 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1822 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1823 that the shared library version number is set correctly.
1825 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1827 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1828 Miles Bader <miles@gnu.ai.mit.edu>.
1829 * configure: Rebuild.
1831 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1833 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1836 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1838 * configure: Rebuild with autoconf 2.8.
1840 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1842 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1843 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1845 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1847 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1848 since they appear as targets in Makefile.in.
1849 * configure: Rebuild.
1851 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1853 * mpw-make.sed: Edit out shared library support bits.
1855 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1857 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1858 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1859 (sparc_opcodes): Add sparclet insns.
1860 (sparclet_cpreg_table): New static local.
1861 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1862 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1864 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1866 * i386-dis.c (index16): New static variable.
1867 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1869 (OP_indirE): Return result of OP_E.
1870 (OP_E): Check for 16 bit addressing mode, and disassemble
1871 correctly. Optimised 32 bit case a little. Don't print
1872 "(base,index,scale)" when sib specifies only an offset.
1874 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1876 * configure.in: Set and substitute SHLIB_DEP.
1877 * configure: Rebuild.
1878 * Makefile.in (SHLIB_DEP): New variable.
1879 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1880 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1881 COMMON_SHLIB, add them to piclist with appropriate modifications.
1882 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1883 here: just use piclist.
1885 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1887 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1888 (print_insn_sparc): Rewrite v9/not-v9 tests.
1889 (compare_opcodes): Likewise.
1890 * sparc-opc.c (MASK_<ARCH>): Define.
1891 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1892 (sparclet,v6notv9): Define.
1893 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1894 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1896 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1898 * configure.in: Call AC_PROG_CC before configure.host.
1899 * configure: Rebuild.
1901 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1903 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1905 * i386-dis.c (onebyte_has_modrm): New static array.
1906 (twobyte_has_modrm): New static array.
1907 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1909 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1911 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1914 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1916 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1919 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1921 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1922 m68010up, not just m68020up | cpu32.
1924 * Makefile.in (SONAME): New variable.
1925 ($(SHLINK)): Make a link to the transformed name, as well.
1926 (stamp-tshlink): New target.
1927 (install): Skip stamp-tshlink during install.
1929 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1931 * configure.in: Call AC_ARG_PROGRAM.
1932 * configure: Rebuild.
1933 * Makefile.in (program_transform_name): New variable.
1934 (install): Transform library name before installing it.
1936 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1938 * i960-dis.c (mem): Add HX dcinva instruction.
1940 Support for building as a shared library, based on patches from
1941 Alan Modra <alan@spri.levels.unisa.edu.au>:
1942 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1943 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1944 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1945 * configure: Rebuild.
1946 * Makefile.in (ALLLIBS): New variable.
1947 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1948 (COMMON_SHLIB, SHLINK): New variables.
1949 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1950 (STAGESTUFF): Remove variable.
1951 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1952 (stamp-piclist, piclist): New targets.
1953 ($(SHLIB), $(SHLINK)): New targets.
1954 ($(OFILES)): Depend upon stamp-picdir.
1955 (disassemble.o): Build twice if PICFLAG is set.
1956 (MOSTLYCLEAN): Add pic/*.o.
1957 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1958 (distclean): Remove pic and stamp-picdir.
1959 (install): Install shared libraries.
1960 (stamp-picdir): New target.
1962 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1964 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1965 Print unknown instruction as "unknown", rather than in hex.
1967 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1969 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1971 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1973 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1975 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1977 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1978 when necessary. From Ulrich Drepper
1979 <drepper@myware.rz.uni-karlsruhe.de>.
1981 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1983 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1984 sparc_num_opcodes. Update architecture enum values.
1985 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1986 (sparc_opcode_lookup_arch): New function.
1987 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1988 (sparc_opcodes): Add v9a shutdown insn.
1990 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1992 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1993 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1995 (print_insn_sparc64): Deleted.
1996 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1999 * sparc-opc.c (architecture_pname): Add v9a.
2001 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2003 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2004 incorrectly defined as 0x16 when it should be 0x15.
2005 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2006 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2007 excb (exception barrier) which is defined in the Alpha
2008 Architecture Handbook version 2.
2009 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2010 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2011 disassembled as or, for example.
2013 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2015 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2016 (_print_insn_mips): Change i from int to unsigned int.
2018 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2020 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2021 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2023 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2025 * i386-dis.c: Added Pentium Pro instructions.
2027 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2029 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2032 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2034 * sh-opc.h (sh_nibble_type): Added REG_B.
2035 (sh_arg_type): Added A_REG_B.
2036 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2038 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2040 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2042 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2044 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2046 * Makefile.in (distclean): Remove stamp-h. From Ronald
2047 F. Guilmette <rfg@monkeys.com>.
2049 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2051 From David Mosberger-Tang <davidm@azstarnet.com>:
2052 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2055 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2057 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2058 (sh_table): Added many SH3 opcodes.
2059 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2061 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2063 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2064 (subco,subco.): Mark this PPC, not PPCCOM.
2066 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2068 * configure: Rebuild with autoconf 2.7.
2070 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2072 * configure: Rebuild with autoconf 2.6.
2074 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2076 * configure.in: Sort list of architectures. Accept but do nothing
2077 for alliant, convex, pyramid, romp, and tahoe.
2079 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2081 * a29k-dis.c (print_special): Change num to unsigned int.
2083 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2085 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2088 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2090 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2091 * configure: Rebuilt.
2093 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2095 * configure.in: Add case for bfd_i860_arch.
2096 * configure: Rebuild.
2098 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2100 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2101 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2102 (NEXTDOUBLE): Likewise.
2103 (print_insn_m68k): Don't match fmoveml if there is more than one
2104 register in the list.
2105 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2107 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2109 * m68k-opc.c: Use #W rather than #w.
2110 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2112 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2114 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2115 and likewise for all the dbxx opcodes.
2117 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2119 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2121 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2123 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2124 the VR4100 specific instructions to the mips_opcodes structure.
2126 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2128 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2129 ugly Metrowerks bug in CW6, is fixed in CW7.
2131 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2133 * ppc-opc.c (whole file): Add flags for common/any support.
2135 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2137 * Makefile.in (BISON): Remove macro.
2138 (FLAGS_TO_PASS): Remove BISON.
2140 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2142 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2144 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2145 instructions that take no args by looking at the match mask.
2146 (print_insn_arg): Always print "%" before register names.
2147 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2148 [case '_']: Don't print "@#" before address.
2149 [case 'J']: Use "%s" as format string, not register name.
2150 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2152 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2154 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2157 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2159 From David Mosberger-Tang <davidm@azstarnet.com>
2161 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2162 (alpha_insn_set): added definitions for VAX floating point
2163 instructions (Unix compilers don't generate these, but handcoded
2164 assembly might still use them).
2166 * alpha-dis.c (print_insn_alpha): added support for disassembling
2167 the miscellaneous instructions in the Alpha instruction set.
2169 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2171 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2172 no longer create sysdep.h, sed ppc-opc.c to work around a
2173 serious Metrowerks C bug.
2174 * mpw-make.in: Remove.
2175 * mpw-make.sed: New file, used by mpw-configure to edit
2176 Makefile.in into an MPW makefile.
2178 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2180 * Makefile.in (maintainer-clean): New synonym for realclean.
2182 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2184 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2185 which use '0', '1', and '2' instead. Specify the proper size for
2186 a pmove immediate operand. Correct the pmovefd patterns to be
2187 moves to a register, not from a register.
2188 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2190 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2192 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2193 %psr, %wim, %tbr as F_NOTV9.
2195 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2197 * Makefile.in (Makefile): Just rebuild Makefile when running
2199 (config.h, stamp-h): New targets.
2200 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2201 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2202 rebuilding config.h.
2203 * configure: Rebuild.
2205 * mips-opc.c: Change unaligned loads and stores with "t,A"
2206 operands to use "t,A(b)".
2208 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2210 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2212 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2214 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2215 until 3 instead of until 2.
2217 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2219 * Makefile.in (ALL_CFLAGS): Define.
2220 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2221 (MOSTLYCLEAN): Add config.log.
2222 (distclean): Don't remove config.log.
2223 * configure.in: Substitute HDEFINES.
2224 * configure: Rebuild.
2226 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2228 * sh-opc.h (sh_arg_type): Add F_FR0.
2229 (sh_table, case fmac): Add F_FR0 as first argument.
2231 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2233 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2235 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2237 * sparc-dis.c: Remove all references to NO_V9.
2239 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2241 * aclocal.m4: Just include ../bfd/aclocal.m4.
2242 * configure: Rebuild.
2244 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2246 * sparc-dis.c (X_DISP19): Define.
2247 (print_insn, case 'G'): Use it.
2248 (print_insn, case 'L'): Sign extend displacement.
2250 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2252 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2253 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2254 host_makefile_frag or frags.
2255 * aclocal.m4: New file.
2256 * configure: Rebuild.
2257 * Makefile.in (INSTALL): Set to @INSTALL@.
2258 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2259 (INSTALL_DATA): Set to @INSTALL_DATA@.
2261 (AR_FLAGS): Set to rc rather than qc.
2262 (CC): Define as @CC@.
2263 (CFLAGS): Set to @CFLAGS@.
2264 (@host_makefile_frag@): Remove.
2265 (config.status): Remove dependency upon @frags@.
2267 * configure.in: ../bfd/config.bfd now just sets shell variables.
2268 Use them rather than looking through target Makefile fragments.
2269 * configure: Rebuild.
2271 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2273 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2275 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2277 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2278 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2281 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2282 (lookup_{name,value}): New functions.
2283 (prefetch_table): New static local.
2284 (sparc_{encode,decode}_prefetch): New functions.
2285 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2287 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2289 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2292 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2294 * sh-dis.c: Correct comment on first line of file.
2296 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2298 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2300 * sparc-opc.c (asi, membar): New static locals.
2301 (sparc_{encode,decode}_{asi,membar}): New functions.
2302 (sparc_opcodes, membar insn): Fix.
2303 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2304 Support decoding of membar masks.
2307 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2309 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2311 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2313 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2314 and likewise for the other branches. Add bhs as an alias for bcc,
2315 and likewise for the size variants. Add dbhs as an alias for
2318 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2320 * sh-opc.h (FP sts instructions): Update to match reality.
2322 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2324 * m68k-dis.c: (fpcr_names): Add % before all register names.
2325 (reg_names): Likewise.
2326 (print_insn_arg): Don't explicitly print % before register names.
2327 Add % before register names in static array names. In case 'r',
2328 print data registers as `@(Dn)', not `Dn@'. When printing a
2329 memory address, don't print @# before it.
2330 (print_indexed): Change base_disp and outer_disp from int to
2331 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2332 syntax. Sign extend 8 byte displacement correctly.
2333 (print_base): Print using MIT syntax. Print zpc when appropriate.
2334 Change parameter disp from int to bfd_vma.
2336 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2339 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2341 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2342 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2343 * sh-opc.h (sh_arg_type): Add new operand types.
2344 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2346 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2348 * Makefile.in (distclean): Remove generated file config.h.
2350 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2352 * Makefile.in (distclean): Remove generated file config.h.
2354 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2356 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2358 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2360 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2361 rather than numopcodes. Use m68k_opcodes rather than removed
2362 opcode function. Don't check F_ALIAS.
2363 (print_insn_arg): Change first parameter to be const char *.
2364 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2365 (m68k-opc.o): New target.
2366 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2367 * configure: Rebuild.
2369 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2371 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2372 (opcode_bits, opcode_hash_table): New variables.
2373 (opcodes_initialized): Renamed from opcodes_sorted.
2374 (build_hash_table): New function.
2375 (is_delayed_branch): Use hash table.
2376 (print_insn): Renamed from print_insn_sparc, made static.
2377 Build and use hash table. If !sparc64, ignore sparc64 insns,
2378 and vice-versa if sparc64.
2379 (print_insn_sparc, print_insn_sparc64): New functions.
2380 (compare_opcodes): Move sparc64 opcodes to end.
2381 Print commutative insns with constant second.
2382 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2384 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2386 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2387 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2388 avoids printing a delay slot in a delay slot.
2389 * sh-opc.h (sh_table): Fully bracket last entry.
2391 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2393 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2395 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2397 * configure.in: Get host_makefile_frag from ${srcdir}.
2399 * configure.in: Autoconfiscated. Check for string[s].h. Create
2400 config.h from config.in. Don't set up sysdep.h link.
2401 * sysdep.h: New file.
2402 * configure, config.in: New files, generated from configure.in.
2403 * Makefile.in: Updated to be processed autoconf-style.
2404 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2405 (Makefile): Depend on config.status.
2406 (config.status): New rule.
2407 * configure.bat: Update Makefile substitutions.
2409 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2411 * mips-opc.c (L1): Define.
2412 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2413 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2416 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2418 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2419 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2420 have multiple add units but only a single logical unit.
2422 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2423 shifted by 18, without any insertion or extraction function.
2424 (insert_cr, extract_cr): Remove.
2426 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2428 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2431 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2433 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2434 * sh-opc.h: Add copyright.
2436 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2438 * Makefile.in (crunch-m68k): Delete extra target accidentally
2439 checked in a while ago.
2441 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2443 * sh-opc.h (sh_table): Add SH3 support.
2445 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2447 * sh-opc.h: Added bsrf and braf.
2449 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2451 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2452 bogus [ls]fm{ea,fd} patterns.
2454 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2455 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2456 initialize it from memory. Make function static.
2457 (print_insn_{big,little}_arm): New functions.
2458 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2459 the correct endianness.
2461 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2463 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2466 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2468 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2469 17th, so that it builds again using GCC as the compiler.
2471 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2473 * mips-dis.c (print_insn_little_mips): Cast return value from
2474 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2475 expects an unsigned long, and that might be fewer words of
2476 argument storage (e.g., if bfd_vma is long long on a 32-bit
2478 (print_insn_big_mips): Likewise with bfd_getb32 value.
2479 (_print_insn_mips): Now static.
2481 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2483 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2484 gcc memory hog problem with initializer is fixed.
2486 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2488 Merge in support for Mac MPW as a host.
2489 (Old change descriptions retained for informational value.)
2491 * mpw-config.in (archname): Compute from the config.
2492 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2494 * mpw-config.in (target_arch): Compute from canonical target.
2495 (m68k, mips, powerpc, sparc): Add architectures.
2496 * mpw-make.in (disassemble.c.o): Add.
2497 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2499 * mpw-config.in (BFD_MACHINES): Set to a default value.
2500 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2502 * mpw-make.in (CSEARCH): Add extra-include to search path.
2504 * mpw-config.in (varargs.h): Don't create.
2505 (sysdep.h): Create using forward-include.
2506 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2508 * mpw-config.in: New file, MPW version of configure.in.
2509 * mpw-make.in: New file, MPW version of Makefile.in.
2511 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2513 * alpha-dis.c (print_insn_alpha): Put empty statement after
2516 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2518 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2519 (low_sign_extend): Likewise.
2520 (get_field): Delete unused function.
2521 (set_field, deposit_14, deposit_21): Likewise.
2523 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2525 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2528 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2530 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2532 * alpha-opc.h (OSF_ASMCODE): define
2533 print pal-code names as defined in App C of the
2534 Alpha Architecture Reference Manual
2536 * alpha-dis.c: cleaned up output
2537 print stylized code forms as defined in App A.4.3 of the
2538 Alpha Architecture Reference Manual
2540 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2542 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2544 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2547 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2549 * m68k-dis.c (opcode): New function. Returns address of opcode
2550 table entry given index, even if the opcode table was split to
2551 work around gcc bugs.
2552 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2554 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2555 (reg_names): Now const.
2556 (print_insn_arg): Arrays cacheFieldName and names now const.
2557 (print_indexed): Array scales now const.
2559 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2561 * ppc-opc.c: Sort recently added instructions by minor opcode
2562 number within major opcode number.
2564 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2566 * hppa-dis.c: Include libhppa.h.
2568 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2570 * mips-opc.c: Change dli to use M_DLI, and add dla.
2572 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2574 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2576 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2578 * mips-opc.c: Add r4650 mul instruction.
2580 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2582 * mips-opc.c: Add uld and usd macros for unaligned double load and
2585 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2587 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2588 mfdcr, mtdcr, icbt, iccci.
2590 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2592 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2593 signed char fields to shorts, more portable.
2595 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2597 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2598 char fields as signed chars, since they may have negative values.
2600 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2602 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2603 (mycroft@netbsd.org).
2605 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2607 From "Logg, Ed" <elogg@ea.com>:
2608 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2609 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2612 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2614 * ppc-opc.c: Changes based on patch from David Edelsohn
2615 <edelsohn@mhpcc.edu>.
2616 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2619 (insert_tbr): New static function.
2620 (extract_tbr): New static function.
2621 (XFXFXM_MASK, XFXM): Define.
2622 (XSPRBAT_MASK, XSPRG_MASK): Define.
2623 (powerpc_opcodes): Add instructions to access special registers by
2624 name. Add mtcr and mftbu.
2626 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2628 * mips-opc.c (P3): Define.
2629 (mips_opcodes): Add mad and madu.
2631 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2633 * configure.in: Add W65 support.
2634 * disassemble.c: Likewise.
2635 * w65-opc.h, w65-dis.c: New files.
2637 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2639 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2642 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2644 * mips-opc.c: Add dli as a synonym for li.
2646 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2648 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2649 print something for reserved opcode values, even if it won't
2652 * mips-dis.c (_print_insn_mips): When initializing, shift right
2653 and mask, to avoid sign extension problems on the Alpha.
2655 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2658 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2660 * sh-opc.h (mov.l gbr): Get direction right.
2661 * sh-dis.c (print_insn_shx): New function.
2662 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2663 print opcodes with right byte order.
2665 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2667 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2668 to avoid conflicts with getopt.
2670 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2672 * hppa-dis.c (print_insn_hppa): Read the instruction using
2673 bfd_getb32, so that it works on a little endian or 64 bit host.
2674 Remove unused local variable op.
2676 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2678 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2679 addu does not work correctly if -mips3.
2681 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2683 * a29k-dis.c (print_special): Add special register names defined
2684 on 29030, 29040 and 29050.
2685 (print_insn): Handle new operand type 'I'.
2687 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2689 * Makefile.in (INSTALL): Use top level install.sh script.
2691 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2693 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2694 that it works on a little endian host.
2696 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2698 * configure.in: Use ${config_shell} when running config.bfd.
2700 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2702 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2704 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2706 * a29k-dis.c (print_insn): Print the opcode.
2708 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2710 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2712 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2714 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2716 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2718 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2719 which store a value into memory.
2721 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2723 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2724 * arm-dis.c, arm-opc.h: New files.
2726 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2728 * Makefile.in (ns32k-dis.o): Add dependency.
2729 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2730 string, not as array of chars.
2732 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2734 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2736 * sparc-opc.c: Added sparclite extended FP operations, and
2737 versions of v9 impdep* instructions permitting specification of
2740 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2742 * i960-dis.c (reg_names): Now const.
2743 (struct sparse_tabent): New type, copied from array type in mem
2745 (ctrl): Local static array ctrl_tab now const.
2746 (cobr): Local static array cobr_tab now const.
2747 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2748 static variable mem_tab no longer explicitly initialized. Changed
2749 mem_init to const array of struct sparse_tabent.
2750 (reg): Local static variable reg_tab no longer explicitly
2751 initialized. Changed reg_init to const array of struct
2753 (ea): Local static array scale_tab now const.
2755 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2758 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2760 * configure.bat: the disassember needs to be enabled for
2761 "objdump -d" to work in djgpp.
2763 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2765 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2766 (invalid_float): Enabled general version, doesn't require running
2767 on ns32k host. Changed to take char* argument, and test for
2768 explicitly specified sizes, instead of using sizeof() on host CPU
2770 (INVALID_FLOAT): Cast first argument.
2771 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2772 list_P032, list_M032): Now const.
2773 (optlist, list_search): Made appropriate arguments now point to
2775 (print_insn_arg): Changed static array of one-character-string
2776 pointers into a static const array of characters; fixed sprintf
2777 statement accordingly.
2779 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2781 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2782 from distribution. A ns32k-dis.c from a previous distribution has
2783 been brought up to date and supports the new interface.
2785 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2787 * configure.in: add bfd_ns32k_arch target support.
2789 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2790 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2792 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2794 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2797 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2799 * h8300-dis.c, mips-dis.c: Don't use true and false.
2801 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2803 * configure.in: Change --with-targets to --enable-targets.
2805 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2807 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2808 opcodes to the first instruction with that opcode, to speed
2809 disassembly of large files. From ralphc@pyramid.com (Ralph
2812 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2814 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2816 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2818 * configure.bat: update to latest makefile.in
2820 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2822 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2823 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2824 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2825 slot insn is in a delay slot.
2826 * z8k-opc.h: (resflg): Fix patterns.
2827 * h8500-opc.h Fix CR insn patterns.
2829 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2831 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2832 "cmpl" before POWER versions, so that gas -many uses them.
2834 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2836 * disassemble.c: New file.
2837 * Makefile.in (OFILES): Add disassemble.o.
2838 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2839 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2840 binutils/configure.in.
2842 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2843 opcode being examined.
2845 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2847 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2848 (insert_ral, insert_ram, insert_ras): New functions.
2849 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2850 RAS for store with update.
2852 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2854 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2855 (edelsohn@npac.syr.edu).
2857 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2859 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2862 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2864 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2866 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2868 * ppc-opc.c (powerpc_operands): The signedp field has been
2869 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2870 instead. Add new operand SISIGNOPT.
2871 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2872 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2873 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2876 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2878 * i386-dis.c (struct private): Renamed to dis_private. `private'
2879 is a reserved word for dynix cc.
2881 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2883 * configure.in: Change error message to refer to bfd/config.bfd
2884 rather than bfd/configure.in.
2886 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2888 * ppc-opc.c: Define POWER2 as short alias flag.
2889 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2892 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2894 * i960-dis.c (print_insn_i960): Don't read a second word for
2895 opcodes 0, 1, 2 and 3.
2897 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2899 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2901 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2903 * m68881-ext.c: Removed; no longer used.
2904 * Makefile.in: Changed accordingly.
2906 * m68k-dis.c (ext_format_68881): Don't declare.
2907 (print_insn_m68k): If an instruction uses place 'i', it uses at
2908 least four fixed bytes.
2909 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2910 extended float, convert to double using floatformat_to_double, not
2911 ieee_extended_to_double, and fetch the data before converting it.
2913 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2915 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2916 davidj@ICSI.Berkeley.EDU (David Johnson).
2918 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2920 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2921 PowerPC uses bdnz[l][a].
2923 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2925 * dis-buf.c, i386-dis.c: Include sysdep.h.
2927 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2929 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2931 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2932 by Motorola PowerPC 601 with PPC_OPCODE_601.
2933 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2934 Disassemble Motorola PowerPC 601 instructions as well as normal
2935 PowerPC instructions.
2937 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2939 * i960-dis.c (reg, mem): Just use a static array instead of
2942 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2944 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2945 condition name index if this is for a negated condition.
2947 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2948 Floating point format for 'H' operand is backwards from normal
2949 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2950 operands (fmpyadd and fmpysub), handle bizarre register
2951 translation correctly for single precision format.
2953 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2954 or 'I' operands if the next format specifier is 'M' (fcmp
2955 condition completer).
2957 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2959 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2960 single number giving a bitmask for the MB and ME fields of an M
2961 form instruction. Change NB to accept 32, and turn it into 0;
2962 also turn 0 into 32 when disassembling. Seperated SH from NB.
2963 (insert_mbe, extract_mbe): New functions.
2964 (insert_nb, extract_nb): New functions.
2965 (SC_MASK): Mask out SA and LK bits.
2966 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2967 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2968 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2969 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2970 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2971 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2972 (powerpc_macros): Define table of macro definitions.
2973 (powerpc_num_macros): Define.
2975 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2976 if PPC_OPERAND_NEXT is set.
2978 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2980 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2981 char. Retrieve contents using bfd_getl32 instead of shifting.
2983 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2985 * ppc-opc.c: New file. Opcode table for PowerPC, including
2986 opcodes for POWER (RS/6000).
2987 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2988 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2989 (CFILES): Add ppc-dis.c.
2990 (ppc-dis.o, ppc-opc.o): New targets.
2991 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2993 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2995 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2996 No space before 'u', 'f', or 'N'.
2998 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3000 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3001 farther than we should.
3003 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3005 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3007 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3009 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3011 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3012 needs it, to prevent reading past the end of a section.
3014 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3016 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3017 Removed t,A case for la; always use t,A(b) case.
3019 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3021 From Ted Lemen <mellon@pepper.ncd.com>
3022 * mips-dis.c (print_insn_arg): Handle 'k'.
3023 * mips-opc.c: Make cache use k, not t.
3025 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3027 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3028 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3029 FLOAT_FORMAT_CODE to put out floating point register names.
3031 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3033 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3035 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3037 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3039 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3041 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3042 larger than 32. Moved dsxx32 variants first for disassembler.
3044 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3046 * z8kgen.c, z8k-opc.h: Add full lda information.
3048 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3050 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3051 movb instructions. Any necessary space will be emitted by
3052 the code to handle nullification completers.
3054 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3056 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3058 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3060 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3061 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3063 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3065 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3067 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3069 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3070 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3072 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3074 * m88k-dis.c (m88kdis): comment change. Remove space after
3076 (printop): handle new arg types DEC and XREG for m88110.
3078 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3080 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3081 type for absolute branch addresses. Delete special
3082 "ble" and "be" code in 'W' operand code.
3084 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3086 * mips-opc.c: Set hazard information correctly for branch
3087 likely instructions.
3089 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3091 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3092 info->fprintf_func for printing and info->print_address_func for
3095 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3097 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3099 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3101 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3102 Corrected second case of "b" for disassembler.
3104 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3106 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3107 to BFD swapping routines to correspond to BFD name changes.
3109 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3111 * mips-opc.c: Change div machine instruction to be z,s,t rather
3112 than s,t. Change div macro to be d,v,t rather than d,s,t.
3113 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3114 rem and remu which generates only the corresponding div
3115 instruction. This is for compatibility with the MIPS assembler,
3116 which only generates the simple machine instruction when an
3117 explicit destination of $0 is used.
3118 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3120 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3122 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3123 WR_31 hazard for bal, bgezal, bltzal.
3125 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3127 * hppa-dis.c (print_insn_hppa): Use print function
3128 from within the disassemble_info, not fprintf_filtered.
3130 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3132 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3133 Law, law@cs.utah.edu.)
3135 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3137 * mips-opc.c ("absu"): Removed.
3140 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3142 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3143 Changed hazard information to distinguish between memory load
3144 delays and coprocessor load delays.
3146 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3148 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3150 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3152 * configure.in: Don't pass cpu to config.bfd.
3154 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3156 * m88k-dis.c (m88kdis): Make class unsigned.
3158 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3160 * alpha-dis.c (print_insn_alpha): One branch format case was
3161 missing the instruction name.
3163 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3165 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3166 Add the arch-specific auxiliary files.
3167 (OFILES): Remove the arch-specific auxiliary files
3168 and use BFD_MACHINES instead of DIS_LIBS.
3169 * configure.in: Set BFD_MACHINES based on --with-targets option.
3171 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3173 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3176 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3178 * sparc-opc.c: Change CONST to const to deal with gcc
3179 -Dconst=__const -traditional.
3181 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3183 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3184 coprocessor instructions out of #if 0, and made them use new
3187 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3189 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3191 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3193 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3194 instruction, for use by the disassembler.
3196 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3197 hand-coded sign extensions that depended on 32-bit host ints.
3198 FIXME, we still depend on big-endian host bitfield ordering.
3199 (sparc_print_insn): Set the insn_info_valid field, and the
3200 other fields that describe the instruction being printed.
3202 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3204 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3205 `jmp' instead of just one of them.
3207 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3209 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3210 (fput_fp_reg_r): Renamed from fput_reg_r.
3211 (fput_fp_reg): New function.
3212 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3214 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3216 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3218 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3220 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3222 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3223 don't output a space.
3225 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3227 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3229 * mips-opc.c: New file, containing opcode table from
3230 ../include/opcode/mips.h.
3231 * Makefile.in: Add it.
3233 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3235 * m88k-dis.c: New file, moved in from gdb and changed to use the
3236 new dis-asm.h disassembler interface.
3237 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3238 (m88k-dis.o): New target.
3240 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3242 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3243 argument string const char * to correspond to opcode/mips.h.
3245 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3247 * mips-dis.c: Updated to account for name changes in new version
3249 * Makefile.in: Added header file dependencies.
3251 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3253 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3255 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3257 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3258 extend, rather than shifts.
3260 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3262 * Makefile.in: Undo 15 June change.
3264 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3266 * m68k-dis.c (print_insn_arg): Change return value to byte count
3268 * m68k-dis.c: Re-write to detect invalid operands before
3269 printing anything, so we can handle this the same way we
3270 handle invalid opcodes.
3272 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3274 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3276 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3278 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3281 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3283 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3285 * configure.in: Do make sysdep.h link.
3286 * Makefile.in: Search ../include. Don't search ../bfd.
3288 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3290 Changes from Jeff Law, law@cs.utah.edu:
3291 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3292 Do not print a space before the completers specified by
3295 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3297 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3298 defined, since gdb has been fixed.
3300 Changes from Jeff Law, law@cs.utah.edu:
3301 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3302 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3303 be a *disassemble_info, not a *FILE.
3304 * hppa-dis.c: Support 'd', '!', and 'a'.
3305 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3306 * hppa-dis.c: Delete cases which are no longer needed.
3308 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3310 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3312 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3314 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3317 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3319 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3320 * configure.in: No longer need to configure to get sysdep.h.
3322 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3324 * Patches from Jeffrey Law <law@cs.utah.edu>.
3325 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3326 templates for 1.1 FP computational instructions.
3328 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3330 * h8500-dis.c (print_insn_h8500): Address argument is type
3332 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3335 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3336 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3338 * sparc-dis.c (compare_opcodes): Move static declaration to
3341 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3343 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3344 instruction, remove unimp hack from 'l' argument.
3346 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3348 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3351 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3353 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3354 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3357 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3359 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3360 arrays of string pointers to 2-d arrays of chars, to save
3363 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3365 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3366 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3368 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3370 * hppa-dis.c: New file from Utah, adapted to new disassembler
3372 * Makefile.in: Include it.
3374 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3376 * sh-dis.c, sh-opc.h: New files.
3378 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3380 * alpha-dis.c, alpha-opc.h: New files.
3382 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3384 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3387 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3389 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3391 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3393 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3396 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3398 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3399 and double percent signs a few places.
3401 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3403 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3404 Use info->print_address_func not print_address.
3406 * dis-buf.c (generic_print_address): New function.
3408 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3410 * Makefile.in: Add sparc-dis.c.
3411 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3413 Add `add' instruction to the set that get checked
3414 for a preceding `sethi' in order to print an absolute address.
3415 * (print_insn): Disassembly prefers real instructions.
3416 (is_delayed_branch): Speed up.
3417 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3418 Still missing some float ops, and needs testing.
3419 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3420 F_ALIAS. Use printf, not fprintf, when not passing a file
3422 (compare_opcodes): Check that identical instructions have
3423 identical opcodes, complain otherwise.
3426 * Include reg_names.
3428 Use dis-asm.h/read_memory_func interface.
3430 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3432 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3433 deliberately return non-zero to setjmp from longjmp. Otherwise
3434 this code fails to compile.
3436 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3438 * m68k-dis.c: Fix prototype for fetch_arg().
3440 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3442 * dis-buf.c: New file, for new read_memory_func interface.
3443 Makefile.in (OFILES): Include it.
3444 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3445 Use new read_memory_func interface.
3447 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3449 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3450 * h8500-opc.h: Fix couple of opcodes.
3452 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3454 * Makefile.in: add dvi & installcheck targets
3456 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3458 * Makefile.in: Update for h8500-dis.c.
3460 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3462 * h8500-dis.c, h8500-opc.h: New files
3464 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3466 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3467 ../include/dis-asm.h.
3468 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3469 and ../gdb/m68k-pinsn.c).
3470 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3471 and ../gdb/i386-pinsn.c).
3472 * m68881-ext.c: New file. Moved definition of
3473 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3474 * Makefile.in: Adjust for new files.
3475 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3476 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3477 can be dis-assembled.
3479 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3481 * mips-dis.c (print_insn_arg): Now returns void.
3483 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3485 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3486 files that use the macros.
3488 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3490 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3491 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3492 (CFILES): Added mips-dis.c.
3494 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3496 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3497 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3499 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3501 * Makefile.in: Improve *clean rules.
3502 * configure.in: Allow a default host.
3504 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3506 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3507 files include other sysdep files
3509 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3511 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3513 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3515 * configure.in: For host support, use ../bfd/configure.host
3516 so it stays in sync with the ../bfd/hosts database.
3518 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3520 * configure.in: use cpu-vendor-os triple instead of nested cases
3522 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3524 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3525 *always* the wrong one.
3527 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3529 * z8kgen.c: added copyright info
3531 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3533 * z8k-dis.c (unparse_instr): prettier tabs
3534 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3536 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3538 * configure.in: Add ncr* configuration.
3539 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3540 picayune ANSI compilers happy.
3542 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3544 * configure.in (i386): Make i386 and i486 synonymous for now.
3545 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3547 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3549 * Makefile.in (install): Fix typo.
3551 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3553 * Makefile.in (make): Remove obsolete crud.
3554 (sparc-opc.o): Avoid Sun Make VPATH bug.
3556 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3558 * Makefile.in: since there are no SUBDIRS, remove rule and
3559 references of subdir_do.
3561 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3563 * Makefile.in (install): Get the library name right here too.
3564 Don't install bfd.h, since it's unrelated to this library. No
3565 subdirs to recurse into, either.
3566 (CFILES): The source file has a .c suffix, not .o.
3568 * sparc-opc.c: New file, moved from BFD.
3569 * Makefile.in (OFILES): Build it.
3571 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3573 * z8k-dis.c: fixed forward refferences of some declarations.
3575 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3577 * Makefile.in: get the name of the library right
3579 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3581 * z8k-dis.c: knows how to disassemble z8k stuff
3582 * z8k-opc.h: new file full of z8000 opcodes
3586 version-control: never
projects / deliverable / binutils-gdb.git / blob