opcodes/ChangeLog

   1 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
   2
   3         From David Mosberger-Tang  <davidm@azstarnet.com>:
   4         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
   5         instruction.
   6
   7 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
   8
   9         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
  10         (sh_table): Added many SH3 opcodes.
  11         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
  12
  13 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
  14
  15         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
  16         (subco,subco.): Mark this PPC, not PPCCOM.
  17
  18 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
  19
  20         * configure: Rebuild with autoconf 2.7.
  21
  22 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
  23
  24         * configure: Rebuild with autoconf 2.6.
  25
  26 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
  27
  28         * configure.in: Sort list of architectures.  Accept but do nothing
  29         for alliant, convex, pyramid, romp, and tahoe.
  30
  31 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
  32
  33         * a29k-dis.c (print_special): Change num to unsigned int.
  34
  35 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
  36
  37         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
  38         shifting it.
  39
  40 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
  41
  42         * configure.in: Call AC_CHECK_PROG to find and cache AR.
  43         * configure: Rebuilt.
  44
  45 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
  46
  47         * configure.in: Add case for bfd_i860_arch.
  48         * configure: Rebuild.
  49
  50 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
  51
  52         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
  53         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
  54         (NEXTDOUBLE): Likewise.
  55         (print_insn_m68k): Don't match fmoveml if there is more than one
  56         register in the list.
  57         (print_insn_arg): Handle a place of '8' for a type of 'L'.
  58
  59 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
  60
  61         * m68k-opc.c: Use #W rather than #w.
  62         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
  63
  64 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
  65
  66         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
  67         and likewise for all the dbxx opcodes.
  68
  69 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
  70
  71         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
  72
  73 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
  74
  75         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
  76         the VR4100 specific instructions to the mips_opcodes structure.
  77
  78 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
  79
  80         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
  81         ugly Metrowerks bug in CW6, is fixed in CW7.
  82
  83 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
  84
  85         * ppc-opc.c (whole file): Add flags for common/any support.
  86
  87 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
  88
  89         * Makefile.in (BISON): Remove macro.
  90         (FLAGS_TO_PASS): Remove BISON.
  91
  92 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
  93
  94         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
  95
  96         * m68k-dis.c (print_insn_m68k): Recognize all two-word
  97         instructions that take no args by looking at the match mask.
  98         (print_insn_arg): Always print "%" before register names.
  99         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
 100         [case '_']: Don't print "@#" before address.
 101         [case 'J']: Use "%s" as format string, not register name.
 102         [case 'B']: Treat place == 'C' like 'l' and 'L'.
 103
 104 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
 105
 106         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
 107         name correctly.
 108
 109 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
 110
 111         From David Mosberger-Tang  <davidm@azstarnet.com>
 112
 113         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
 114         (alpha_insn_set): added definitions for VAX floating point
 115         instructions (Unix compilers don't generate these, but handcoded
 116         assembly might still use them).
 117
 118         * alpha-dis.c (print_insn_alpha): added support for disassembling
 119         the miscellaneous instructions in the Alpha instruction set.
 120
 121 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
 122
 123         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
 124         no longer create sysdep.h, sed ppc-opc.c to work around a
 125         serious Metrowerks C bug.
 126         * mpw-make.in: Remove.
 127         * mpw-make.sed: New file, used by mpw-configure to edit
 128         Makefile.in into an MPW makefile.
 129
 130 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
 131
 132         * Makefile.in (maintainer-clean): New synonym for realclean.
 133
 134 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 135
 136         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
 137         which use '0', '1', and '2' instead.  Specify the proper size for
 138         a pmove immediate operand.  Correct the pmovefd patterns to be
 139         moves to a register, not from a register.
 140         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
 141
 142 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
 143
 144         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
 145         %psr, %wim, %tbr as F_NOTV9.
 146
 147 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
 148
 149         * Makefile.in (Makefile): Just rebuild Makefile when running
 150         config.status.
 151         (config.h, stamp-h): New targets.
 152         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
 153         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
 154         rebuilding config.h.
 155         * configure: Rebuild.
 156
 157         * mips-opc.c: Change unaligned loads and stores with "t,A"
 158         operands to use "t,A(b)".
 159
 160 start-sanitize-sh3e
 161 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 162
 163         * sh-dis.c (print_insn_shx): Add F_FR0 support.
 164
 165 end-sanitize-sh3e
 166 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 167
 168         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
 169         until 3 instead of until 2.
 170
 171 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 172
 173         * Makefile.in (ALL_CFLAGS): Define.
 174         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
 175         (MOSTLYCLEAN): Add config.log.
 176         (distclean): Don't remove config.log.
 177         * configure.in: Substitute HDEFINES.
 178         * configure: Rebuild.
 179
 180 start-sanitize-sh3e
 181 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 182
 183         * sh-opc.h (sh_arg_type): Add F_FR0.
 184         (sh_table, case fmac): Add F_FR0 as first argument.
 185
 186 end-sanitize-sh3e
 187 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 188
 189         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
 190
 191 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
 192
 193         * sparc-dis.c: Remove all references to NO_V9.
 194
 195 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
 196
 197         * aclocal.m4: Just include ../bfd/aclocal.m4.
 198         * configure: Rebuild.
 199
 200 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
 201
 202         * sparc-dis.c (X_DISP19): Define.
 203         (print_insn, case 'G'): Use it.
 204         (print_insn, case 'L'): Sign extend displacement.
 205
 206 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
 207
 208         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
 209         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
 210         host_makefile_frag or frags.
 211         * aclocal.m4: New file.
 212         * configure: Rebuild.
 213         * Makefile.in (INSTALL): Set to @INSTALL@.
 214         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
 215         (INSTALL_DATA): Set to @INSTALL_DATA@.
 216         (AR): Set to @AR@.
 217         (AR_FLAGS): Set to rc rather than qc.
 218         (CC): Define as @CC@.
 219         (CFLAGS): Set to @CFLAGS@.
 220         (@host_makefile_frag@): Remove.
 221         (config.status): Remove dependency upon @frags@.
 222
 223         * configure.in: ../bfd/config.bfd now just sets shell variables.
 224         Use them rather than looking through target Makefile fragments.
 225         * configure: Rebuild.
 226
 227 start-sanitize-sh3e
 228 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 229
 230         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
 231
 232 end-sanitize-sh3e
 233 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
 234
 235         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
 236         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
 237         sparc64 insns.
 238
 239         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
 240         (lookup_{name,value}): New functions.
 241         (prefetch_table): New static local.
 242         (sparc_{encode,decode}_prefetch): New functions.
 243         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
 244
 245 start-sanitize-sh3e
 246 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 247
 248         * sh-opc.h: Add blank lines to improve readabililty of sh3e
 249         instructions.
 250
 251 end-sanitize-sh3e
 252 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 253
 254         * sh-dis.c: Correct comment on first line of file.
 255
 256 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
 257
 258         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
 259
 260         * sparc-opc.c (asi, membar): New static locals.
 261         (sparc_{encode,decode}_{asi,membar}): New functions.
 262         (sparc_opcodes, membar insn): Fix.
 263         * sparc-dis.c (print_insn): Call sparc_decode_asi.
 264         Support decoding of membar masks.
 265         (X_MEMBAR): Define.
 266
 267 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
 268
 269         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
 270
 271 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 272
 273         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
 274         and likewise for the other branches.  Add bhs as an alias for bcc,
 275         and likewise for the size variants.  Add dbhs as an alias for
 276         dbcc.
 277
 278 start-sanitize-sh3e
 279 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 280
 281         * sh-opc.h (FP sts instructions): Update to match reality.
 282
 283 end-sanitize-sh3e
 284 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 285
 286         * m68k-dis.c: (fpcr_names): Add % before all register names.
 287         (reg_names): Likewise.
 288         (print_insn_arg): Don't explicitly print % before register names.
 289         Add % before register names in static array names.  In case 'r',
 290         print data registers as `@(Dn)', not `Dn@'.  When printing a
 291         memory address, don't print @# before it.
 292         (print_indexed): Change base_disp and outer_disp from int to
 293         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 294         syntax.  Sign extend 8 byte displacement correctly.
 295         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 296         Change parameter disp from int to bfd_vma.
 297
 298         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 299         for jsr.
 300
 301 start-sanitize-sh3e
 302 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 303
 304         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 305         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 306         * sh-opc.h (sh_arg_type): Add new operand types.
 307         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 308
 309 end-sanitize-sh3e
 310 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 311
 312         * Makefile.in (distclean): Remove generated file config.h.
 313
 314 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 315
 316         * Makefile.in (distclean): Remove generated file config.h.
 317
 318 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 319
 320         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 321         Clean up tables.
 322         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 323         (opcode): Remove.
 324         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 325         rather than numopcodes.  Use m68k_opcodes rather than removed
 326         opcode function.  Don't check F_ALIAS.
 327         (print_insn_arg): Change first parameter to be const char *.
 328         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 329         (m68k-opc.o): New target.
 330         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 331         * configure: Rebuild.
 332
 333 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 334
 335         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 336         (opcode_bits, opcode_hash_table): New variables.
 337         (opcodes_initialized): Renamed from opcodes_sorted.
 338         (build_hash_table): New function.
 339         (is_delayed_branch): Use hash table.
 340         (print_insn): Renamed from print_insn_sparc, made static.
 341         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 342         and vice-versa if sparc64.
 343         (print_insn_sparc, print_insn_sparc64): New functions.
 344         (compare_opcodes): Move sparc64 opcodes to end.
 345         Print commutative insns with constant second.
 346         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 347
 348 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 349
 350         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 351         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 352         avoids printing a delay slot in a delay slot.
 353         * sh-opc.h (sh_table): Fully bracket last entry.
 354
 355 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 356
 357         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 358
 359 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 360
 361         * configure.in: Get host_makefile_frag from ${srcdir}.
 362
 363         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 364         config.h from config.in.  Don't set up sysdep.h link.
 365         * sysdep.h: New file.
 366         * configure, config.in: New files, generated from configure.in.
 367         * Makefile.in: Updated to be processed autoconf-style.
 368         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 369         (Makefile): Depend on config.status.
 370         (config.status): New rule.
 371         * configure.bat: Update Makefile substitutions.
 372
 373 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 374
 375         * mips-opc.c (L1): Define.
 376         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 377         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 378         and wb.
 379
 380 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 381
 382         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 383         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 384         have multiple add units but only a single logical unit.
 385
 386         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 387         shifted by 18, without any insertion or extraction function.
 388         (insert_cr, extract_cr): Remove.
 389
 390 start-sanitize-arc
 391 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 392
 393         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 394
 395 end-sanitize-arc
 396 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 397
 398         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 399         register names.
 400
 401 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 402
 403         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 404         * sh-opc.h: Add copyright.
 405
 406 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 407
 408         * Makefile.in (crunch-m68k): Delete extra target accidentally
 409         checked in a while ago.
 410
 411 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 412
 413         * sh-opc.h (sh_table): Add SH3 support.
 414
 415 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 416
 417         * sh-opc.h: Added bsrf and braf.
 418
 419 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 420
 421         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 422         bogus [ls]fm{ea,fd} patterns.
 423
 424         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 425         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 426         initialize it from memory.  Make function static.
 427         (print_insn_{big,little}_arm): New functions.
 428         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 429         the correct endianness.
 430
 431 start-sanitize-arc
 432 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 433
 434         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 435         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 436 end-sanitize-arc
 437
 438 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 439
 440         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 441         enum list.
 442
 443 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 444
 445         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 446         17th, so that it builds again using GCC as the compiler.
 447
 448 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 449
 450         * mips-dis.c (print_insn_little_mips): Cast return value from
 451         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 452         expects an unsigned long, and that might be fewer words of
 453         argument storage (e.g., if bfd_vma is long long on a 32-bit
 454         machine).
 455         (print_insn_big_mips): Likewise with bfd_getb32 value.
 456         (_print_insn_mips): Now static.
 457
 458 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 459
 460         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 461         gcc memory hog problem with initializer is fixed.
 462
 463 start-sanitize-arc
 464 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 465
 466         * arc-opc.c (NULL): Define.
 467         (arc_operands, insn fields u,s): Delete.
 468         (arc_operands, insn fields a,b,c): Mark as signed.
 469         (arc_opcodes): No longer const, links computed at run-time.
 470         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 471         suffixes that affect the insn code.
 472         (arc_opcodes): Resort table to macros are first.
 473         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 474         (arc_opcodes, st [b] entry): Likewise.
 475         (arc_opcodes, st [b,d] entry): Fix mask, value.
 476         (arc_reg_names): Add entries for r29, r30, r31, r60.
 477         (opcode_map, icode_map): New static globals.
 478         (arc_opcode_init_tables): Initialize them.
 479         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 480         (insert_shimmoffset): Signal error if register present.
 481         Validate constant.
 482         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 483 end-sanitize-arc
 484
 485 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 486
 487         Merge in support for Mac MPW as a host.
 488         (Old change descriptions retained for informational value.)
 489
 490         * mpw-config.in (archname): Compute from the config.
 491         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 492
 493         * mpw-config.in (target_arch): Compute from canonical target.
 494         (m68k, mips, powerpc, sparc): Add architectures.
 495         * mpw-make.in (disassemble.c.o): Add.
 496         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 497
 498         * mpw-config.in (BFD_MACHINES): Set to a default value.
 499         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 500
 501         * mpw-make.in (CSEARCH): Add extra-include to search path.
 502
 503         * mpw-config.in (varargs.h): Don't create.
 504         (sysdep.h): Create using forward-include.
 505         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 506
 507         * mpw-config.in: New file, MPW version of configure.in.
 508         * mpw-make.in: New file, MPW version of Makefile.in.
 509
 510 start-sanitize-arc
 511 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 512
 513         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 514         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 515         (print_insn_*): Pass bfd mach number, not opcode version.
 516         * arc-opc.c (arc_get_opcode_mach): New function.
 517 end-sanitize-arc
 518
 519 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 520
 521         * alpha-dis.c (print_insn_alpha): Put empty statement after
 522         default label.
 523
 524 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 525
 526         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 527         (low_sign_extend): Likewise.
 528         (get_field): Delete unused function.
 529         (set_field, deposit_14, deposit_21): Likewise.
 530
 531 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 532
 533         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 534           (guy@netapp.com).
 535
 536 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 537
 538         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 539
 540         * alpha-opc.h (OSF_ASMCODE): define
 541         print pal-code names as defined in App C of the
 542         Alpha Architecture Reference Manual
 543
 544         * alpha-dis.c: cleaned up output
 545         print stylized code forms as defined in App A.4.3 of the
 546         Alpha Architecture Reference Manual
 547
 548 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 549
 550         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 551         `rfe'.
 552         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 553         'N', and 'M'.
 554
 555 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 556
 557         * m68k-dis.c (opcode): New function.  Returns address of opcode
 558         table entry given index, even if the opcode table was split to
 559         work around gcc bugs.
 560         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 561         directly.
 562         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 563         (reg_names): Now const.
 564         (print_insn_arg): Arrays cacheFieldName and names now const.
 565         (print_indexed): Array scales now const.
 566
 567 start-sanitize-arc
 568 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 569
 570         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 571         (print_insn_arc_{host,graphics,audio}): Likewise.
 572         (print_insn): Add prototype.
 573         (arc_get_disassembler): New arg `big_p'.  Return little or big
 574         print fn accordingly.
 575         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 576         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 577         (arc_opval_supported): Likewise.
 578         * disassemble.c (disassembler): Pass big endian flag to
 579         arc_get_disassembler.
 580 end-sanitize-arc
 581
 582 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 583
 584         * ppc-opc.c: Sort recently added instructions by minor opcode
 585         number within major opcode number.
 586
 587 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 588
 589         * hppa-dis.c: Include libhppa.h.
 590
 591 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 592
 593         * mips-opc.c: Change dli to use M_DLI, and add dla.
 594
 595 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 596
 597         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 598
 599 start-sanitize-arc
 600 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 601
 602         * arc-dis.c (arc_get_disassembler): Change argument to int,
 603         one of bfd_mach_arc_xxx.  All callers updated.
 604 end-sanitize-arc
 605
 606 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 607
 608         * mips-opc.c: Add r4650 mul instruction.
 609
 610 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 611
 612         * mips-opc.c: Add uld and usd macros for unaligned double load and
 613         store.
 614
 615 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 616
 617         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 618         mfdcr, mtdcr, icbt, iccci.
 619
 620 start-sanitize-arc
 621 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 622
 623         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 624         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 625         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 626         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 627         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 628         (insert_absaddr): New function.
 629
 630 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 631
 632         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 633         New argument `cpu', pass it to arc_opcode_init_tables.
 634         Document byte order dependencies.  Ignore unsupported insns.
 635         (arc_get_disassembler): New function.
 636         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 637         print_insn_arc_audio): New functions.
 638         * arc-opc.c (MULTSHIFT operand): Delete.
 639         (UNSIGNED, SATURATION): New operands.
 640         (mac, mul, mul64, mulu64): New insns.
 641         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 642         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 643         (host,graphics,audio extended and auxiliary regs): Define.
 644         (ss, sc, mh, ml): New suffixes.
 645         (arc_opcode_supported, arc_opval_supported): New functions.
 646         (insert_multshift, extract_multshift): Deleted.
 647         * disassemble.c (disassembler, case bfd_arch_arc): Call
 648         arc_get_disassembler to get disassembler routine.
 649 end-sanitize-arc
 650
 651 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 652
 653         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 654         signed char fields to shorts, more portable.
 655
 656 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 657
 658         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 659         char fields as signed chars, since they may have negative values.
 660
 661 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 662
 663         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 664           (mycroft@netbsd.org).
 665
 666 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 667
 668         From "Logg, Ed" <elogg@ea.com>:
 669         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 670         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 671         value.
 672
 673 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 674
 675         * ppc-opc.c: Changes based on patch from David Edelsohn
 676         <edelsohn@mhpcc.edu>.
 677         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 678         SPR.
 679         (FXM_MASK): Define.
 680         (insert_tbr): New static function.
 681         (extract_tbr): New static function.
 682         (XFXFXM_MASK, XFXM): Define.
 683         (XSPRBAT_MASK, XSPRG_MASK): Define.
 684         (powerpc_opcodes): Add instructions to access special registers by
 685         name.  Add mtcr and mftbu.
 686
 687 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 688
 689         * mips-opc.c (P3): Define.
 690         (mips_opcodes): Add mad and madu.
 691
 692 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 693
 694         * configure.in: Add W65 support.
 695         * disassemble.c: Likewise.
 696         * w65-opc.h, w65-dis.c: New files.
 697
 698 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 699
 700         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 701         immediates.
 702
 703 start-sanitize-arc
 704 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 705
 706         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 707         slot.
 708         * arc-opc.c (extract_reladdr): New function.
 709         (insert_reladdr): Store address right-shifted by 2.
 710 end-sanitize-arc
 711
 712 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 713
 714         * mips-opc.c: Add dli as a synonym for li.
 715
 716 start-sanitize-arc
 717 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 718
 719         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 720         All uses changed.
 721         (extraction fns): Insn argument now array of two words.  Return pointer
 722         to value's table entry.  All uses changed.
 723         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 724         (insert_multshift, extract_multshift): New fns.
 725         (arc_operands): Add support for cache bypass suffix.  Add support for
 726         predefined aux regs.  Modifier bits moved to flags field.
 727         (arc_opcodes): Likewise.
 728         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 729         New insn rlc.  Update to syntax in programmer's manual.
 730         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 731         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 732         bypass.
 733         (arc_opcode_init_tables): New argument to indicate cpu type.
 734         (insert_reg): Handle predefined aux regs.
 735         (extract_reg): Likewise.
 736         (lookup_register): New fn.
 737         * arc-dis.c (arc_condition_codes): Deleted.
 738         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 739         Clean up modifier handling.  Handle predefined aux regs.
 740 end-sanitize-arc
 741
 742 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 743
 744         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 745         print something for reserved opcode values, even if it won't
 746         assemble again.
 747
 748         * mips-dis.c (_print_insn_mips): When initializing, shift right
 749         and mask, to avoid sign extension problems on the Alpha.
 750
 751         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 752         control registers.
 753
 754 start-sanitize-arc
 755 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 756
 757         * configure.in: Add ARC support.
 758         * disassemble.c: Likewise.
 759         * arc-dis.c, arc-opc.c: New files.
 760 end-sanitize-arc
 761
 762 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 763
 764         * sh-opc.h (mov.l gbr): Get direction right.
 765         * sh-dis.c (print_insn_shx): New function.
 766         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 767         print opcodes with right byte order.
 768
 769 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 770
 771         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 772         to avoid conflicts with getopt.
 773
 774 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 775
 776         * hppa-dis.c (print_insn_hppa): Read the instruction using
 777         bfd_getb32, so that it works on a little endian or 64 bit host.
 778         Remove unused local variable op.
 779
 780 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 781
 782         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 783         addu does not work correctly if -mips3.
 784
 785 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 786
 787         * a29k-dis.c (print_special): Add special register names defined
 788         on 29030, 29040 and 29050.
 789         (print_insn): Handle new operand type 'I'.
 790
 791 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 792
 793         * Makefile.in (INSTALL): Use top level install.sh script.
 794
 795 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 796
 797         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 798         that it works on a little endian host.
 799
 800 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 801
 802         * configure.in: Use ${config_shell} when running config.bfd.
 803
 804 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 805
 806         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 807
 808 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 809
 810         * a29k-dis.c (print_insn): Print the opcode.
 811
 812 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 813
 814         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 815
 816 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 817
 818         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 819
 820 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 821
 822         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 823         which store a value into memory.
 824
 825 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 826
 827         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 828         * arm-dis.c, arm-opc.h: New files.
 829
 830 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 831
 832         * Makefile.in (ns32k-dis.o): Add dependency.
 833         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 834         string, not as array of chars.
 835
 836 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 837
 838         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 839
 840         * sparc-opc.c: Added sparclite extended FP operations, and
 841         versions of v9 impdep* instructions permitting specification of
 842         the OPF field.
 843
 844 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 845
 846         * i960-dis.c (reg_names): Now const.
 847         (struct sparse_tabent): New type, copied from array type in mem
 848         function.
 849         (ctrl): Local static array ctrl_tab now const.
 850         (cobr): Local static array cobr_tab now const.
 851         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 852         static variable mem_tab no longer explicitly initialized.  Changed
 853         mem_init to const array of struct sparse_tabent.
 854         (reg): Local static variable reg_tab no longer explicitly
 855         initialized.  Changed reg_init to const array of struct
 856         sparse_tabent.
 857         (ea): Local static array scale_tab now const.
 858
 859         start-sanitize-i960xl
 860         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
 861         (REG_MAX): Updated.
 862         end-sanitize-i960xl
 863
 864 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
 865
 866         * configure.bat: the disassember needs to be enabled for
 867         "objdump -d" to work in djgpp.
 868
 869 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 870
 871         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
 872         (invalid_float): Enabled general version, doesn't require running
 873         on ns32k host.  Changed to take char* argument, and test for
 874         explicitly specified sizes, instead of using sizeof() on host CPU
 875         types.
 876         (INVALID_FLOAT): Cast first argument.
 877         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
 878         list_P032, list_M032): Now const.
 879         (optlist, list_search): Made appropriate arguments now point to
 880         const.
 881         (print_insn_arg): Changed static array of one-character-string
 882         pointers into a static const array of characters; fixed sprintf
 883         statement accordingly.
 884
 885 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
 886
 887         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
 888         from distribution. A ns32k-dis.c from a previous distribution has
 889         been brought up to date and supports the new interface.
 890
 891         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
 892
 893         * configure.in: add bfd_ns32k_arch target support.
 894
 895         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
 896         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
 897
 898 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
 899
 900         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
 901         disassembly right.
 902
 903 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
 904
 905         * h8300-dis.c, mips-dis.c: Don't use true and false.
 906
 907 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
 908
 909         * configure.in: Change --with-targets to --enable-targets.
 910
 911 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 912
 913         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
 914         opcodes to the first instruction with that opcode, to speed
 915         disassembly of large files.  From ralphc@pyramid.com (Ralph
 916         Campbell).
 917
 918 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 919
 920         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
 921
 922 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
 923
 924         * configure.bat: update to latest makefile.in
 925
 926 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
 927
 928         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
 929         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
 930         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
 931         slot insn is in a delay slot.
 932         * z8k-opc.h: (resflg): Fix patterns.
 933         * h8500-opc.h Fix CR insn patterns.
 934
 935 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 936
 937         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
 938         "cmpl" before POWER versions, so that gas -many uses them.
 939
 940 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 941
 942         * disassemble.c: New file.
 943         * Makefile.in (OFILES): Add disassemble.o.
 944         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
 945         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
 946         binutils/configure.in.
 947
 948         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
 949         opcode being examined.
 950
 951 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 952
 953         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
 954         (insert_ral, insert_ram, insert_ras): New functions.
 955         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
 956         RAS for store with update.
 957
 958 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 959
 960         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
 961         (edelsohn@npac.syr.edu).
 962
 963 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 964
 965         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
 966         immediate argument.
 967
 968 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
 969
 970         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
 971
 972 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 973
 974         * ppc-opc.c (powerpc_operands): The signedp field has been
 975         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
 976         instead.  Add new operand SISIGNOPT.
 977         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
 978         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
 979         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
 980         than signedp field.
 981
 982 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 983
 984         * i386-dis.c (struct private):  Renamed to dis_private. `private'
 985         is a reserved word for dynix cc.
 986
 987 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 988
 989         * configure.in: Change error message to refer to bfd/config.bfd
 990         rather than bfd/configure.in.
 991
 992 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
 993
 994         * ppc-opc.c: Define POWER2 as short alias flag.
 995         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
 996         fsqrt.
 997
 998 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 999
1000         * i960-dis.c (print_insn_i960): Don't read a second word for
1001         opcodes 0, 1, 2 and 3.
1002
1003 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1004
1005         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1006
1007 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1008
1009         * m68881-ext.c: Removed; no longer used.
1010         * Makefile.in: Changed accordingly.
1011
1012         * m68k-dis.c (ext_format_68881): Don't declare.
1013         (print_insn_m68k): If an instruction uses place 'i', it uses at
1014         least four fixed bytes.
1015         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
1016         extended float, convert to double using floatformat_to_double, not
1017         ieee_extended_to_double, and fetch the data before converting it.
1018
1019 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1020
1021         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
1022         davidj@ICSI.Berkeley.EDU (David Johnson).
1023
1024 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1025
1026         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1027         PowerPC uses bdnz[l][a].
1028
1029 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1030
1031         * dis-buf.c, i386-dis.c:  Include sysdep.h.
1032
1033 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1034
1035         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1036
1037         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1038         by Motorola PowerPC 601 with PPC_OPCODE_601.
1039         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1040         Disassemble Motorola PowerPC 601 instructions as well as normal
1041         PowerPC instructions.
1042
1043 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1044
1045         * i960-dis.c (reg, mem): Just use a static array instead of
1046         calling xmalloc.
1047
1048 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1049
1050         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1051         condition name index if this is for a negated condition.
1052
1053         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1054         Floating point format for 'H' operand is backwards from normal
1055         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
1056         operands (fmpyadd and fmpysub), handle bizarre register
1057         translation correctly for single precision format.
1058
1059         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1060         or 'I' operands if the next format specifier is 'M' (fcmp
1061         condition completer).
1062
1063 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1064
1065         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1066         single number giving a bitmask for the MB and ME fields of an M
1067         form instruction.  Change NB to accept 32, and turn it into 0;
1068         also turn 0 into 32 when disassembling.  Seperated SH from NB.
1069         (insert_mbe, extract_mbe): New functions.
1070         (insert_nb, extract_nb): New functions.
1071         (SC_MASK): Mask out SA and LK bits.
1072         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1073         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
1074         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
1075         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1076         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1077         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
1078         (powerpc_macros): Define table of macro definitions.
1079         (powerpc_num_macros): Define.
1080
1081         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1082         if PPC_OPERAND_NEXT is set.
1083
1084 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1085
1086         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1087         char.  Retrieve contents using bfd_getl32 instead of shifting.
1088
1089 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1090
1091         * ppc-opc.c: New file.  Opcode table for PowerPC, including
1092         opcodes for POWER (RS/6000).
1093         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
1094         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1095         (CFILES): Add ppc-dis.c.
1096         (ppc-dis.o, ppc-opc.o): New targets.
1097         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1098
1099 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1100
1101         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1102         No space before 'u', 'f', or 'N'.
1103
1104 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
1105
1106         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1107         farther than we should.
1108
1109         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1110
1111 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1112
1113         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1114
1115 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1116
1117         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1118         needs it, to prevent reading past the end of a section.
1119
1120 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1121
1122         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1123         Removed t,A case for la; always use t,A(b) case.
1124
1125 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1126
1127         From Ted Lemen <mellon@pepper.ncd.com>
1128         * mips-dis.c (print_insn_arg): Handle 'k'.
1129         * mips-opc.c: Make cache use k, not t.
1130
1131 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1132
1133         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
1134         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1135         FLOAT_FORMAT_CODE to put out floating point register names.
1136
1137 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1138
1139         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1140
1141 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1142
1143         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1144
1145 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1146
1147         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1148         larger than 32.  Moved dsxx32 variants first for disassembler.
1149
1150 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1151
1152         * z8kgen.c, z8k-opc.h: Add full lda information.
1153
1154 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
1155
1156         * hppa-dis.c (print_insn_hppa): Do not emit a space after
1157         movb instructions.  Any necessary space will be emitted by
1158         the code to handle nullification completers.
1159
1160 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1161
1162         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1163
1164 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1165
1166         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
1167         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
1168
1169 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1170
1171         * mips-opc.c: Correct lwu opcode value (book had it wrong).
1172
1173 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1174
1175         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1176         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1177
1178 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1179
1180         * m88k-dis.c (m88kdis): comment change.  Remove space after
1181           printing mnemonic.
1182           (printop): handle new arg types DEC and XREG for m88110.
1183
1184 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
1185
1186         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1187         type for absolute branch addresses.  Delete special
1188         "ble" and "be" code in 'W' operand code.
1189
1190 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1191
1192         * mips-opc.c: Set hazard information correctly for branch
1193         likely instructions.
1194
1195 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1196
1197         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1198         info->fprintf_func for printing and info->print_address_func for
1199         address output.
1200
1201 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1202
1203         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1204
1205 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1206
1207         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1208         Corrected second case of "b" for disassembler.
1209
1210 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1211
1212         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1213         to BFD swapping routines to correspond to BFD name changes.
1214
1215 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1216
1217         * mips-opc.c: Change div machine instruction to be z,s,t rather
1218         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1219         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1220         rem and remu which generates only the corresponding div
1221         instruction.  This is for compatibility with the MIPS assembler,
1222         which only generates the simple machine instruction when an
1223         explicit destination of $0 is used.
1224         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1225
1226 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1227
1228         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1229         WR_31 hazard for bal, bgezal, bltzal.
1230
1231 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1232
1233         * hppa-dis.c (print_insn_hppa): Use print function
1234         from within the disassemble_info, not fprintf_filtered.
1235
1236 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1237
1238         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1239         Law, law@cs.utah.edu.)
1240
1241 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1242
1243         * mips-opc.c ("absu"): Removed.
1244         ("dabs"): Added.
1245
1246 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1247
1248         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1249         Changed hazard information to distinguish between memory load
1250         delays and coprocessor load delays.
1251
1252 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1253
1254         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1255
1256 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1257
1258         * configure.in: Don't pass cpu to config.bfd.
1259
1260 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1261
1262         * m88k-dis.c (m88kdis): Make class unsigned.
1263
1264 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1265
1266         * alpha-dis.c (print_insn_alpha): One branch format case was
1267         missing the instruction name.
1268
1269 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1270
1271         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1272         Add the arch-specific auxiliary files.
1273         (OFILES): Remove the arch-specific auxiliary files
1274         and use BFD_MACHINES instead of DIS_LIBS.
1275         * configure.in: Set BFD_MACHINES based on --with-targets option.
1276
1277 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1278
1279         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1280         for swc1.
1281
1282 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1283
1284         * sparc-opc.c: Change CONST to const to deal with gcc
1285         -Dconst=__const -traditional.
1286
1287 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1288
1289         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1290         coprocessor instructions out of #if 0, and made them use new
1291         argument type "C".
1292
1293 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1294
1295         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1296
1297 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1298
1299         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1300         instruction, for use by the disassembler.
1301
1302         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1303         hand-coded sign extensions that depended on 32-bit host ints.
1304         FIXME, we still depend on big-endian host bitfield ordering.
1305         (sparc_print_insn):  Set the insn_info_valid field, and the
1306         other fields that describe the instruction being printed.
1307
1308 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1309
1310         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1311         `jmp' instead of just one of them.
1312
1313 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1314
1315         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1316         (fput_fp_reg_r): Renamed from fput_reg_r.
1317         (fput_fp_reg): New function.
1318         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1319
1320         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1321
1322         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1323
1324 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1325
1326         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1327
1328         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1329         don't output a space.
1330
1331         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1332
1333 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1334
1335         * mips-opc.c: New file, containing opcode table from
1336         ../include/opcode/mips.h.
1337         * Makefile.in: Add it.
1338
1339 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1340
1341         * m88k-dis.c: New file, moved in from gdb and changed to use the
1342         new dis-asm.h disassembler interface.
1343         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1344         (m88k-dis.o): New target.
1345
1346 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1347
1348         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1349         argument string const char * to correspond to opcode/mips.h.
1350
1351 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1352
1353         * mips-dis.c: Updated to account for name changes in new version
1354         of opcode/mips.h.
1355         * Makefile.in: Added header file dependencies.
1356
1357 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1358
1359         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1360
1361 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1362
1363         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1364         extend, rather than shifts.
1365
1366 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1367
1368         * Makefile.in: Undo 15 June change.
1369
1370 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1371
1372         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1373         or error code.
1374         * m68k-dis.c:  Re-write to detect invalid operands before
1375         printing anything, so we can handle this the same way we
1376         handle invalid opcodes.
1377
1378 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1379
1380         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1381
1382 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1383
1384         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1385         header files.
1386
1387 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1388
1389         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1390
1391         * configure.in: Do make sysdep.h link.
1392         * Makefile.in: Search ../include.  Don't search ../bfd.
1393
1394 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1395
1396         Changes from Jeff Law, law@cs.utah.edu:
1397         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1398         Do not print a space before the completers specified by
1399         'a' and 'd'.
1400
1401 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1402
1403         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1404         defined, since gdb has been fixed.
1405
1406         Changes from Jeff Law, law@cs.utah.edu:
1407         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1408         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1409         be a *disassemble_info, not a *FILE.
1410         * hppa-dis.c: Support 'd', '!', and 'a'.
1411         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1412         * hppa-dis.c: Delete cases which are no longer needed.
1413
1414 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1415
1416         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1417
1418 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1419
1420         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1421         H8/300-H opcodes.
1422
1423 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1424
1425         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1426         * configure.in:  No longer need to configure to get sysdep.h.
1427
1428 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1429
1430         * Patches from Jeffrey Law <law@cs.utah.edu>.
1431         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1432         templates for 1.1 FP computational instructions.
1433
1434 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1435
1436         * h8500-dis.c (print_insn_h8500): Address argument is type
1437         bfd_vma.
1438         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1439         Ditto.
1440
1441         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1442         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1443
1444         * sparc-dis.c (compare_opcodes): Move static declaration to
1445         top-level.
1446
1447 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1448
1449         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1450         instruction, remove unimp hack from 'l' argument.
1451
1452 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1453
1454         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1455         happy.
1456
1457 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1458
1459         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1460         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1461         instructions.
1462
1463 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1464
1465         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1466         arrays of string pointers to 2-d arrays of chars, to save
1467         space.
1468
1469 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1470
1471         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1472         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1473
1474 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1475
1476         * hppa-dis.c: New file from Utah, adapted to new disassembler
1477         calling interface.
1478         * Makefile.in: Include it.
1479
1480 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1481
1482         * sh-dis.c, sh-opc.h: New files.
1483
1484 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1485
1486         * alpha-dis.c, alpha-opc.h: New files.
1487
1488 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1489
1490         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1491         value.
1492
1493 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1494
1495         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1496
1497 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1498
1499         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1500         const.
1501
1502 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1503
1504         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1505         and double percent signs a few places.
1506
1507         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1508
1509         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1510         Use info->print_address_func not print_address.
1511
1512         * dis-buf.c (generic_print_address): New function.
1513
1514 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1515
1516         * Makefile.in: Add sparc-dis.c.
1517         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1518         From GDB:
1519             Add `add' instruction to the set that get checked
1520             for a preceding `sethi' in order to print an absolute address.
1521             * (print_insn):  Disassembly prefers real instructions.
1522             (is_delayed_branch):  Speed up.
1523             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1524             Still missing some float ops, and needs testing.
1525             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1526             F_ALIAS.  Use printf, not fprintf, when not passing a file
1527             pointer...
1528             (compare_opcodes): Check that identical instructions have
1529             identical opcodes, complain otherwise.
1530         From binutils:
1531             * New 'm' arg.
1532             * Include reg_names.
1533         From neither:
1534             Use dis-asm.h/read_memory_func interface.
1535
1536 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1537
1538         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1539           deliberately return non-zero to setjmp from longjmp.  Otherwise
1540           this code fails to compile.
1541
1542 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1543
1544         * m68k-dis.c:  Fix prototype for fetch_arg().
1545
1546 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1547
1548         * dis-buf.c: New file, for new read_memory_func interface.
1549         Makefile.in (OFILES): Include it.
1550         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1551         Use new read_memory_func interface.
1552
1553 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1554
1555         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1556         * h8500-opc.h: Fix couple of opcodes.
1557
1558 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1559
1560         * Makefile.in: add dvi & installcheck targets
1561
1562 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1563
1564         * Makefile.in:  Update for h8500-dis.c.
1565
1566 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1567
1568         * h8500-dis.c, h8500-opc.h: New files
1569
1570 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1571
1572         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1573         ../include/dis-asm.h.
1574         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1575         and ../gdb/m68k-pinsn.c).
1576         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1577         and ../gdb/i386-pinsn.c).
1578         * m68881-ext.c:  New file.  Moved definition of
1579         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1580         * Makefile.in:  Adjust for new files.
1581         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1582         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1583         can be dis-assembled.
1584
1585 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1586
1587         * mips-dis.c (print_insn_arg): Now returns void.
1588
1589 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1590
1591         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1592         files that use the macros.
1593
1594 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1595
1596         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1597         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1598         (CFILES): Added mips-dis.c.
1599
1600 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1601
1602         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1603         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1604
1605 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1606
1607         * Makefile.in:  Improve *clean rules.
1608         * configure.in:  Allow a default host.
1609
1610 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1611
1612         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1613         files include other sysdep files
1614
1615 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1616
1617         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1618
1619 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1620
1621         * configure.in:  For host support, use ../bfd/configure.host
1622         so it stays in sync with the ../bfd/hosts database.
1623
1624 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1625
1626         * configure.in: use cpu-vendor-os triple instead of nested cases
1627
1628 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1629
1630         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1631         *always* the wrong one.
1632
1633 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1634
1635         * z8kgen.c: added copyright info
1636
1637 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1638
1639         * z8k-dis.c (unparse_instr): prettier tabs
1640         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1641
1642 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1643
1644         * configure.in:  Add ncr* configuration.
1645         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1646         picayune ANSI compilers happy.
1647
1648 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1649
1650         * configure.in (i386):  Make i386 and i486 synonymous for now.
1651         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1652
1653 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1654
1655         * Makefile.in (install): Fix typo.
1656
1657 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1658
1659         * Makefile.in (make):  Remove obsolete crud.
1660         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1661
1662 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1663
1664         * Makefile.in: since there are no SUBDIRS, remove rule and
1665         references of subdir_do.
1666
1667 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1668
1669         * Makefile.in (install): Get the library name right here too.
1670         Don't install bfd.h, since it's unrelated to this library.  No
1671         subdirs to recurse into, either.
1672         (CFILES): The source file has a .c suffix, not .o.
1673
1674         * sparc-opc.c: New file, moved from BFD.
1675         * Makefile.in (OFILES): Build it.
1676
1677 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1678
1679         * z8k-dis.c: fixed forward refferences of some declarations.
1680
1681 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1682
1683         * Makefile.in: get the name of the library right
1684
1685 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1686
1687         * z8k-dis.c: knows how to disassemble z8k stuff
1688         * z8k-opc.h: new file full of z8000 opcodes
1689
1690 \f
1691 Local Variables:
1692 version-control: never
1693 End: