1 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
3 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
5 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
7 * cgen-asm.c (cgen_parse_address): New argument resultp.
9 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
11 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
13 * mn10200-dis.c (disassemble): PC relative instructions are
14 relative to the next instruction, not the current instruction.
16 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
18 * v850-dis.c (disassemble): Only signed extend values that are not
19 returned by extract functions.
20 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
22 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
24 * v850-opc.c: Update comments. Remove use of
25 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
27 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
29 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
31 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
33 * configure: Rebuilt with latest devo autoconf for NT support.
35 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
37 * v850-dis.c (disassemble): Use curly brace syntax for register
40 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
41 where r0 is being used as a destination register.
44 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
46 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
50 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
52 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
53 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
54 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
55 Add insns to access SGR and DBR.
56 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
59 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
61 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
63 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
65 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
67 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
72 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
74 * configure (cgen_files): Add support for v850e target.
75 * configure.in (cgen_files): Add support for v850e target.
79 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
81 * configure (cgen_files): Add support for v850eq target.
82 * configure.in (cgen_files): Add support for v850eq target.
85 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
87 * configure.in (bfd_arc_arch): Add.
89 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
90 * Makefile.in: Rebuild.
91 * arc-dis.c, arc-opc.c: New files.
92 * disassemble.c (ARCH_all): Define ARCH_arc.
93 (disassembler): Add ARC support.
95 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
98 * .Sanitize (Do-first): Add support for keep-v850eq command line
101 * v850-dis.c (disassemble): Add support for v850EQ instructions.
103 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
104 (v850_opcodes): Add v850EQ instructions.
107 * .Sanitize (Do-first): Add support for keep-v850e command line
110 * v850-dis.c (disassemble): Add support for v850E instructions.
112 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
113 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
114 insert_spe, extract_spe): New Functions.
115 (v850_opcodes): Add v850E instructions.
118 * v850-opc.c: Reorganised and re-layed out to improve readability
121 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
123 * configure: Rebuild with autoconf 2.12.1.
125 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
127 * aclocal.m4, configure: Rebuild with new automake patches.
129 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
131 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
132 * acinclude.m4: Just include acinclude.m4 from BFD.
133 * aclocal.m4, configure: Rebuild.
135 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
137 * Makefile.am: New file, based on old Makefile.in.
138 * acconfig.h: New file.
139 * acinclude.m4: New file.
140 * stamp-h.in: New file.
141 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
142 Removed shared library handling; now handled by libtool. Replace
143 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
144 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
145 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
146 handling in AC_OUTPUT.
147 * dep-in.sed: Change .o to .lo.
148 * Makefile.in: Now built with automake.
149 * aclocal.m4: Now built with aclocal.
150 * config.in, configure: Rebuild.
152 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
154 * mips-opc.c: Fix typo/thinko in "eret" instruction.
157 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
159 * mips-opc.c: Fix coding of mtsa.
162 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
164 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
166 * sparc-dis.c (sorted_opcodes): New static local.
167 (struct opcode_hash): `opcode' is pointer to const element.
168 (build_hash): First arg is now table of sorted pointers.
169 (print_insn_sparc): Sort opcodes by sorting table of pointers.
170 (compare_opcodes): Update.
172 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
174 * cgen-opc.c: #include <ctype.h>.
175 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
176 Handle case insensitive hashing.
177 (hash_keyword_value): Change type of `value' to unsigned int.
179 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
181 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
182 precision FP, mark it as such. Likewise for double precision
183 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
186 (mips_builtin_opcodes): Remove non-existant r5900 instructions
190 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
192 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
193 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
196 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
198 * ppc-opc.c (extract_nsi): make unsigned expression signed before
200 (UNUSED): remove one level of parens, so MSVC doesn't choke on
201 nesting depth when all the macros are expanded.
203 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
205 * sparc-opc.c: The fcmp v9a instructions take an integer register
206 as a destination, not a floating point register. From Christian
207 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
209 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
211 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
212 syntax. From Roman Hodek
213 <rnhodek@faui22c.informatik.uni-erlangen.de>.
215 * i386-dis.c (twobyte_has_modrm): Fix pand.
217 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
219 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
221 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
223 * arm-dis.c: Add prototypes for arm_decode_shift and
226 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
228 * mips-opc.c: Add r3900 insns.
230 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
232 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
233 print delay slot instructions on the same line. When using a PC
234 relative load, add a comment with the value being loaded if it can
237 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
239 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
240 to pushS/popS for segment regs and byte constant so that
241 pushw/popw printed when in 16 bit data mode.
243 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
244 print cbtw, cwtd in 16 bit data mode.
245 * i386-dis.c (putop): extra case W to support above.
247 * i386-dis.c (print_insn_x86): print addr32 prefix when given
248 address size prefix in 16 bit address mode.
250 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
252 * sh-dis.c: Reindent. Rename local variable fprintf to
255 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
257 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
259 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
261 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
263 * mips16-opc.c (mip16_opcodes): same.
265 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
267 * m68k-opc.c (moveb): Change $d to %d.
269 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
271 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
272 (twobyte_has_modrm): Likewise.
274 (OP_MMX, OP_EM, OP_MS): New static functions.
276 * i386-dis.c: Revert patch of April 4. The output now matches
279 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
281 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
284 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
286 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
288 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
290 * Makefile.in (install): Depend upon installdirs.
291 (installdirs): New target.
293 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
295 From Thomas Graichen <graichen@rzpd.de>:
296 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
297 * configure: Rebuild.
299 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
301 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
302 Delete string{,s}.h support.
304 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
306 * cgen-asm.c (cgen_parse_operand_fn): New global.
307 (cgen_parse_{{,un}signed_integer,address}): Update call to
308 cgen_parse_operand_fn.
309 (cgen_init_parse_operand): New function.
310 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
311 from cgen_asm_init_parse.
312 (m32r_cgen_assemble_insn): New operand `errmsg'.
313 Delete call to as_bad, return error message to caller.
314 (m32r_cgen_asm_hash_keywords): #if 0 out.
316 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
318 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
320 [case 'J']: Fix typo in register name.
322 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
324 * configure.in: Substitute SHLIB_LIBS.
325 * configure: Rebuild.
326 * Makefile.in (SHLIB_LIBS): New variable.
327 ($(SHLIB)): Use $(SHLIB_LIBS).
329 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
331 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
333 * cgen-opc.c (hash_keyword_name): Improve algorithm.
335 * disassemble.c (disassembler): Handle m32r.
337 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
339 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
340 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
341 * Makefile.in (CFILES): Add them.
342 (ALL_MACHINES): Add them.
343 (dependencies): Regenerate.
344 * configure.in (cgen_files): New variable.
345 (bfd_m32r_arch): Add entry.
346 * configure: Regenerate.
348 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
350 * configure.in: Correct file names for bfd_mn10[23]00_arch.
351 * configure: Rebuild.
353 * Makefile.in: Rebuild dependencies.
355 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
357 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
360 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
362 * Branched binutils 2.8.
364 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
366 * m10200-dis.c: Rename from mn10200-dis.c.
367 * m10200-opc.c: Rename from mn10200-opc.c.
368 * m10300-dis.c: Rename from mn10300-dis.c
369 * m10300-opc.c: Rename from mn10300-opc.c.
370 * Makefile.in: Update accordingly.
372 * mips16-opc.c: Add mul and dmul macros.
374 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
376 * makefile.vms: Update CFLAGS, add clean target.
378 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
380 * mips-opc.c: Add "wait". From Ralf Baechle
381 <ralf@gnu.ai.mit.edu>.
383 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
384 * configure, config.in: Rebuild.
385 * sysdep.h: Include <stdlib.h> if it exists.
386 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
388 * Makefile.in: Rebuild dependencies.
390 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
392 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
393 Andrew Bray <andy@madhouse.demon.co.uk>.
395 * mips-opc.c: Add cast when setting mips_opcodes.
397 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
399 * v850-dis.c (disassemble): Fix sign extension problem.
400 * v850-opc.c (extract_d*): Fix sign extension problems to make
401 disassembly calculate branch offsets correctly.
403 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
405 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
407 * mips-opc.c: Add dctr and dctw.
410 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
412 * d30v-dis.c (print_insn): Change the way signed constants
415 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
417 * Makefile.in (BFD_H): New variable.
418 (HFILES): New variable.
419 (CFILES): Add all C files.
420 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
421 Delete old dependencies, and build new ones.
422 * dep-in.sed: New file.
424 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
426 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
428 start-sanitize-coldfire
429 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
431 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
434 end-sanitize-coldfire
435 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
437 * mn10200-opc.c: Change "trap" to "syscall".
438 * mn10300-opc.c: Add new "syscall" instruction.
440 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
442 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
443 mulul insns on the coldfire.
445 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
447 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
448 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
449 (print_insn_little_arm): Likewise.
451 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
453 Based on patches from H.J. Lu <hjl@lucon.org>:
454 * i386-dis.c (fetch_data): Add prototype.
455 * m68k-dis.c (fetch_data): Add prototype.
456 (dummy_print_address): Add prototype. Make static.
457 * ppc-opc.c (valid_bo): Add prototype.
458 * sparc-dis.c (build_hash_table): Add prototype.
459 (is_delayed_branch, compute_arch_mask): Add prototypes.
460 (print_insn_sparc): Make several local variables const.
461 (compare_opcodes): Change arguments to const PTR. Add prototype.
462 * sparc-opc.c (arg): Change name field to be const.
463 (lookup_name, lookup_value): Add prototypes. Change table and
464 name parameters to be const.
465 (sparc_encode_asi): Change name parameter to be const.
466 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
467 (sparc_encode_sparclet_cpreg): Likewise.
468 (sparc_decode_asi): Change return type to be const.
469 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
470 (sparc_decode_sparclet_cpreg): Likewise.
472 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
474 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
475 Solaris doesn't like the combined options, and the -f is
477 (stamp-tshlink, install): Likewise.
479 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
481 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
484 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
486 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
488 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
490 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
493 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
495 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
498 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
500 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
502 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
504 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
507 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
509 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
510 floatformat_to_double to make portable.
511 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
514 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
516 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
517 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
519 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
521 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
522 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
525 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
527 * tic80-opc.c (LSI_SCALED): Renamed from this ...
528 (OFF_SL_BR_SCALED): ... to this, and added the flag
529 TIC80_OPERAND_BASEREL to the flags word.
530 (tic80_opcodes): Replace all occurances of LSI_SCALED with
534 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
536 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
537 Change mips_opcodes from const array to a pointer,
538 and change bfd_mips_num_opcodes from const int to int,
539 so that we can increase the size of the mips opcodes table
543 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
545 * tic80-opc.c (tic80_predefined_symbols): Revert change to
546 store BITNUM values in the table in one's complement form
547 to match behavior when assembler is given a raw numeric
548 value for a BITNUM operand.
549 * tic80-dis.c (print_operand_bitnum): Ditto.
553 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
555 * d30v-opc.c: Removed references to FLAG_X.
558 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
560 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
563 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
565 * Makefile.in: Added d30v object files.
566 * configure: (bfd_d30v_arch) Rebuilt.
567 * configure.in: (bfd_d30v_arch) Added new case.
568 * d30v-dis.c: New file.
569 * d30v-opc.c: New file.
570 * disassemble.c (disassembler) Add entry for d30v.
574 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
576 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
577 representations for the floating point BITNUM values.
579 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
581 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
582 in the table in one's complement form, as they appear in the
584 (tic80_symbol_to_value): Use macros to access predefined
586 (tic80_value_to_symbol): Ditto.
587 (tic80_next_predefined_symbol): New function.
588 * tic80-dis.c (print_operand_bitnum): Remove code that did
589 one's complement for BITNUM values.
593 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
595 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
598 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
600 * makefile.vms: Remove 8 bit characters. Update to latest
603 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
605 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
607 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
609 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
610 (IMM24_PCREL): Likewise.
612 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
614 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
615 address for an extended PC relative instruction that is not a
618 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
620 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
624 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
626 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
627 (tic80_opcodes): Sort entries so that long immediate forms
628 come after short immediate forms, making it easier for
629 assembler to select the right one for a given operand.
632 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
634 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
636 (print_insn_mips16): Likewise.
639 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
641 * mips-opc.c: add r5900.
645 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
647 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
648 a symbol class that restricts translation to just that
649 class (general register, condition code, etc).
651 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
653 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
654 and REG_DEST_E for register operands that have to be
655 an even numbered register. Add REG_FPA for operands that
656 are one of the floating point accumulator registers.
657 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
658 (tic80_opcodes): Change entries that need even numbered
659 register operands to use the new operand table entries.
660 Add "or" entries that are identical to "or.tt" entries.
663 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
665 * mips16-opc.c: Add new cases of exit instruction for
667 * mips-dis.c (print_mips16_insn_arg): Display floating point
668 registers in operands of exit instruction. Print `$' before
669 register names in operands of entry and exit instructions.
672 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
674 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
675 pairs for all predefined symbols recognized by the assembler.
676 Also used by the disassembling routines.
677 (tic80_symbol_to_value): New function.
678 (tic80_value_to_symbol): New function.
679 * tic80-dis.c (print_operand_control_register,
680 print_operand_condition_code, print_operand_bitnum):
681 Remove private tables and use tic80_value_to_symbol function.
684 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
686 * d10v-dis.c (print_operand): Change address printing
687 to correctly handle PC wrapping. Fixes PR11490.
689 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
691 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
694 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
696 * mips-dis.c (print_insn_mips16): Set insn_info information.
697 (print_mips16_insn_arg): Likewise.
699 * mips-dis.c (print_insn_mips16): Better handling of an extend
700 opcode followed by an instruction which can not be extended.
702 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
704 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
705 coldfire moveb instruction to not allow an address register as
706 destination. Although the documentation does not indicate that
707 this is invalid, experiments uncovered unexpected behavior.
708 Added a comment explaining the situation. Thanks to Andreas
709 Schwab for pointing this out to me.
712 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
714 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
715 entries are presorted so that entries with the same mnemonic are
716 adjacent to each other in the table. Sort the entries for each
717 instruction so that this is true.
720 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
722 * m68k-dis.c: Include <libiberty.h>.
723 (print_insn_m68k): Sort the opcode table on the most significant
724 nibble of the opcode.
727 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
729 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
730 "vsub", "vst", "xnor", and "xor" instructions.
731 (V_a1): Renamed from V_a, msb of accumulator reg number.
732 (V_a0): Add macro, lsb of accumulator reg number.
734 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
736 * tic80-dis.c (print_insn_tic80): Broke excessively long
737 function up into several smaller ones and arranged for
738 the instruction printing function to be callable recursively
739 to print vector instructions that have both a load and a
740 math instruction packed into a single opcode.
741 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
742 to explain why it comes after the other vector opcodes.
745 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
747 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
748 move insns to handle immediate operands.
750 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
752 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
753 fix operand mask in the "moveml" entries for the coldfire.
756 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
758 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
759 New macros for building vector instruction opcodes.
760 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
761 FMT_LI, which were unused. The field is now a flags field.
762 Remove some opcodes that are possible, but illegal, such
763 as long immediate instructions with doubles for immediate
764 values. Add "vadd" and "vld" instructions.
766 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
768 * tic80-opc.c (tic80_operands): Reorder some table entries to make
769 the order more logical. Move the shift alias instructions ("rotl",
770 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
771 interspersed with the regular sr.x and sl.x instructions. Add
772 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
773 "sub", "subu", "swcr", and "trap".
775 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
777 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
778 (OFF_SL_PC): Renamed from OFF_SL.
779 (OFF_SS_BR): New operand type for base relative operand.
780 (OFF_SL_BR): New operand type for base relative operand.
781 (REG_BASE): New operand type for base register operand.
782 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
783 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
784 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
786 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
787 10 char field, padded with spaces on rhs, rather than a string
788 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
789 than old TIC80_OPERAND_RELATIVE. Add support for new
790 TIC80_OPERAND_BASEREL flag bit.
792 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
794 * tic80-dis.c (print_insn_tic80): Print floating point operands
796 * tic80-opc.c (SPFI): Add single precision floating point
797 immediate operand type.
798 (ROTATE): Add rotate operand type for shifts.
799 (ENDMASK): Add for shifts.
800 (n): Macro for the 'n' bit.
801 (i): Macro for the 'i' bit.
802 (PD): Macro for the 'PD' field.
803 (P2): Macro for the 'P2' field.
804 (P1): Macro for the 'P1' field.
805 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
809 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
811 * mn10200-dis.c (disassemble): Mask off unwanted bits after
812 adding in current address for pc-relative operands.
815 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
817 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
818 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
819 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
820 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
821 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
822 REG_BASE_M_SI, REG_BASE_M_LI respectively.
823 (REG_SCALED, LSI_SCALED): New operand types.
824 (E): New macro for 'E' bit at bit 27.
825 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
826 opcodes, including the various size flavors (b,h,w,d) for
827 the direct load and store instructions.
829 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
831 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
833 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
834 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
835 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
836 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
837 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
838 masks with "MASK_* & ~M_*" to get the M bit reset.
839 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
841 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
843 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
844 correctly. Add support for printing TIC80_OPERAND_BITNUM and
845 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
847 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
848 CC, SICR, and LICR table entries.
849 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
850 "bcnd", and "brcr" opcodes.
853 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
855 * ppc-opc.c (powerpc_operands): Make comment match the
856 actual fields (no shift field).
857 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
859 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
860 partial implementation, work in progress.
861 * tic80-opc.c (tic80_operands): Begin construction operands table.
862 (tic80_opcodes): Continue populating opcodes table and start
863 filling in the operand indices.
864 (tic80_num_opcodes): Add this.
867 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
869 * m68k-opc.c: Add #B case for moveq.
871 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
873 * mn10300-dis.c (disassemble): Make sure all variables are initialized
874 before they are used.
876 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
878 * v850-opc.c (v850_opcodes): Put curly-braces around operands
879 for "breakpoint" instruction.
881 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
883 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
884 (dep): Use ALL_CFLAGS rather than CFLAGS.
886 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
888 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
891 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
893 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
895 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
898 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
900 * mips16-opc.c: Add "abs".
903 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
905 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
906 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
907 (disassembler): Add bfd_arch_tic80 support to set disassemble
909 * tic80-dis.c (print_insn_tic80): Add stub.
911 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
913 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
914 * configure: Regenerate with autoconf.
915 * tic80-dis.c: Add file.
916 * tic80-opc.c: Add file.
919 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
921 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
923 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
925 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
926 (mn10200_opcodes): Use it for some logicals and btst insns.
927 Add "break" and "trap" instructions.
929 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
931 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
933 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
935 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
936 relative load or add now depends upon whether the instruction is
939 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
941 * mn10200-dis.c: Finish writing disassembler.
942 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
943 Fix mask for "jmp (an)".
945 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
946 handle endianness issues for mn10300.
948 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
950 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
952 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
953 instruction. Fix opcode field for "movb (imm24),dn".
955 * mn10200-opc.c (mn10200_operands): Fix insertion position
958 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
960 * mn10200-opc.c: Create mn10200 opcode table.
961 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
962 but moving along nicely.
964 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
966 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
968 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
970 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
971 specifiers for fmovem* instructions.
973 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
975 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
977 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
979 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
982 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
984 * mn10300-opc.c: Add some comments explaining the various
987 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
989 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
991 * m68k-dis.c (print_insn_arg): Handle new < and > operand
994 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
995 operand specifiers in fmovm* instructions.
997 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
999 * ppc-opc.c (insert_li): Give an error if the offset has the two
1000 least significant bits set.
1002 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1004 * mips-dis.c (print_insn_mips16): Separate the instruction from
1005 the arguments with a tab, not a space.
1007 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1009 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1012 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1015 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1017 * configure: Rebuild with autoconf 2.12.
1019 Add support for mips16 (16 bit MIPS implementation):
1020 * mips16-opc.c: New file.
1021 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1022 (mips16_reg_names): New static array.
1023 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1024 after seeing a 16 bit symbol.
1025 (print_insn_little_mips): Likewise.
1026 (print_insn_mips16): New static function.
1027 (print_mips16_insn_arg): New static function.
1028 * mips-opc.c: Add jalx instruction.
1029 * Makefile.in (mips16-opc.o): New target.
1030 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1031 * configure: Rebuild.
1033 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1035 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1036 operand specifiers in *save, *restore and movem* instructions.
1038 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1041 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1042 register operands for immediate arithmetic, not, neg, negx, and
1043 set according to condition instructions.
1045 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1046 specifier of the effective-address operand in immediate forms of
1047 arithmetic instructions. The specifier for the immediate operand
1048 notes how and where the constant will be stored.
1050 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1052 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1055 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1058 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1060 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1062 * mn10300-dis.c (disassemble): Handle register lists.
1064 * mn10300-opc.c: Fix handling of register list operand for
1065 "call", "ret", and "rets" instructions.
1067 * mn10300-dis.c (disassemble): Print PC-relative and memory
1068 addresses symbolically if possible.
1069 * mn10300-opc.c: Distinguish between absolute memory addresses,
1070 pc-relative offsets & random immediates.
1072 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1074 (disassemble): Handle SPLIT and EXTENDED operands.
1076 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1078 * mn10300-dis.c: Rough cut at printing some operands.
1080 * mn10300-dis.c: Start working on disassembler support.
1081 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1083 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1085 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1087 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1089 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1091 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1093 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1094 register argument is calls and jmp instructions.
1096 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1098 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1099 getx operand. Fix opcode for mulqu imm,dn.
1101 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1103 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1104 in MN10300_OPERAND_SPLIT operands for how many bits
1105 appear in the basic insn word. Add IMM32_HIGH24,
1106 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1107 (mn10300_opcodes): Use new operands as needed.
1109 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1110 for bset, bclr, btst instructions.
1111 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1113 * mn10300-opc.c (mn10300_operands): Remove many redundant
1114 operands. Update opcode table as appropriate.
1115 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1116 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1118 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1120 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1121 operands (for indexed load/stores). Fix bitpos for DI
1122 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1123 few instructions that insert immediates/displacements in the
1124 middle of the instruction. Add IMM8E for 8 bit immediate in
1125 the extended part of an instruction.
1126 (mn10300_operands): Use new opcodes as appropriate.
1128 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1130 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1131 sequential so the assembler never parallelizes it with
1134 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1136 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1137 a data/address register that appears in register field 0
1138 and register field 1.
1139 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1141 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1143 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1144 standard disassembly.
1146 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1147 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1148 Recategorize PALcode instructions.
1150 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1152 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1154 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1156 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1157 there are no operand types.
1159 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1161 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1163 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1165 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1167 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1169 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1171 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1172 and sst.w instructions.
1174 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1177 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1179 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1182 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1184 * ppc-opc.c (PPCPWR2): Define.
1185 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1188 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1190 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1191 field for movhu instruction.
1193 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1194 cast value to "long" not "signed long" to keep hpux10
1197 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1199 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1202 * mn10300-opc.c (FMT*): Remove definitions.
1204 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1205 for shift-by-register opcodes.
1207 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1208 into [AD][MN][01] for encoding the position of the register
1211 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1213 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1214 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1216 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1218 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1219 Fix various typos. Add "PAREN" operand.
1220 (MEM, MEM2): Define.
1221 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1222 operands. Fix several typos.
1224 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1227 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1229 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1230 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1232 (mn10300_opcodes): Break opcode format out into its own field.
1233 Update many operand fields to deal with signed vs unsigned
1234 issues. Fix one or two typos in the "mov" instruction
1235 opcode, mask and/or operand fields.
1237 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1239 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1240 m68851 wasn't reset.
1242 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1244 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1245 all opcodes. Very rough cut at operands for all opcodes.
1247 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1250 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1252 * mn10200-opc.c, mn10300-opc.c: New files.
1253 * mn10200-dis.c, mn10300-dis.c: New files.
1254 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1255 * disassemble.c: Break mn10x00 support into 10200 and 10300
1257 * configure.in: Likewise.
1258 * configure: Rebuilt.
1260 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1262 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1264 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1266 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1268 * disassemble (ARCH_mn10x00): Define.
1269 (disassembler): Handle bfd_arch_mn10x00.
1270 * configure.in: Recognize bfd_mn10x00_arch.
1271 * configure: Rebuilt.
1273 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1275 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1276 accordingly. Don't declare functions using op_rtn.
1278 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1280 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1281 params to be more standard.
1282 * (disassemble): Print absolute addresses and symbolic names for
1283 branch and jump targets.
1284 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1286 * (v850_opcodes): Add breakpoint insn.
1288 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1290 * m68k-opc.c: Move the fmovemx data register cases before the
1291 other cases, so that they get recognized before the data register
1292 does gets treated as a degenerate register list.
1294 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1296 * mips-opc.c: Add a case for "div" and "divu" with two registers
1297 and a destination of $0.
1299 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1301 * mips-dis.c (print_insn_arg): Add prototype.
1302 (_print_insn_mips): Ditto.
1304 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1306 * mips-dis.c (print_insn_arg): Print condition code registers as
1309 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1311 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1313 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1315 * v850-dis.c (disassemble): Make static. Provide prototype.
1317 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1319 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1322 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1324 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1325 ']' characters into the output stream.
1326 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1327 Add "memop" field to all opcodes (for the disassembler).
1328 Reorder opcodes so that "nop" comes before "mov" and "jr"
1329 comes before "jarl".
1331 * v850-dis.c (print_insn_v850): Fix typo in last change.
1333 * v850-dis.c (print_insn_v850): Properly handle disassembling
1334 a two byte insn at the end of a memory region when the memory
1335 region's size is only two byte aligned.
1337 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1339 * v850-dis.c (v850_reg_names): Define.
1340 (v850_sreg_names, v850_cc_names): Likewise.
1341 (disassemble): Very rough cut at printing operands (unformatted).
1343 * v850-opc.c (BOP_MASK): Fix.
1344 (v850_opcodes): Fix mask for jarl and jr.
1346 * v850-dis.c: New file. Skeleton for disassembler support.
1347 * Makefile.in Remove v850 references, they're not needed here
1348 and they weren't being sanitized away.
1349 * configure.in: Add v850-dis.o when building v850 toolchains.
1350 * configure: Rebuilt.
1351 * disassemble.c (disassembler): Call v850 disassembler.
1353 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1354 (insert_d8_6, extract_d8_6): New functions.
1355 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1356 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1358 (IF4A, IF4B): Use "D7" instead of "D7S".
1359 (IF4C, IF4D): Use "D8_7" instead of "D8".
1360 (IF4E, IF4F): New. Use "D8_6".
1361 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1362 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1364 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1365 (v850_operands): Change D16 to D16_15, use special insert/extract
1366 routines. New new D16 that uses the generic insert/extract code.
1367 (IF7A, IF7B): Use D16_15.
1368 (IF7C, IF7D): New. Use D16.
1369 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1371 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1372 message. Issue an error if the branch offset is odd.
1374 * v850-opc.c: Add notes about needing special insert/extract
1375 for all the load/store insns, except "ld.b" and "st.b".
1377 * v850-opc.c (insert_d22, extract_d22): New functions.
1378 (v850_operands): Use insert_d22 and extract_d22 for
1380 (insert_d9): Fix range check.
1382 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1384 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1385 and set bits field to D9 and D22 operands.
1387 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1389 * v850-opc.c (v850_operands): Define SR2 operand.
1390 (v850_opcodes): "ldsr" uses R1,SR2.
1392 * v850-opc.c (v850_opcodes): Fix opcode specs for
1393 sld.w, sst.b, sst.h, sst.w, and nop.
1395 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1397 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1398 end of the opcode table.
1400 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1402 * d10v-opc.c (pre_defined_registers): Added register pairs,
1403 "r0-r1", "r2-r3", etc.
1405 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1407 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1408 Create I16U for an unsigned 16bit mmediate operand.
1409 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1411 * v850-opc.c (v850_operands): Define EP operand.
1412 (IF4A, IF4B, IF4C, IF4D): Use EP.
1414 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1415 with immediate operand, "movhi". Tweak "ldsr".
1417 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1418 correct. Get sld.[bhw] and sst.[bhw] closer.
1420 * v850-opc.c (v850_operands): "not" is a two byte insn
1422 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1424 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1426 * v850-opc.c (two): Get order of words correct.
1428 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1430 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1431 register source and destination operands.
1432 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1434 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1435 same thinko in "trap" opcode.
1437 * v850-opc.c (v850_opcodes): Add initializer for size field
1440 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1441 Add D8 for 8-bit unsigned field in short load/store insns.
1442 (IF4A, IF4D): These both need two registers.
1443 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1444 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1445 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1446 for "ldsr" and "stsr".
1447 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1450 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1451 short store word (sst.w).
1453 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1455 * v850-opc.c (v850_operands): Added insert and extract fields,
1456 pointers to functions that handle unusual operand encodings.
1458 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1460 * v850-opc.c (v850_opcodes): Enable "trap".
1462 * v850-opc.c (v850_opcodes): Fix order of displacement
1463 and register for "set1", "clr1", "not1", and "tst1".
1465 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1467 * v850-opc.c (v850_operands): Add "B3" support.
1468 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1471 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1473 * v850-opc.c: Close unterminated comment.
1475 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1477 * v850-opc.c (v850_operands): Add flags field.
1478 (v850_opcodes): add move opcodes.
1480 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1482 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1483 * configure: (bfd_v850v_arch) Add new case.
1484 * configure.in: (bfd_v850_arch) Add new case.
1485 * v850-opc.c: New file.
1487 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1489 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1491 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1493 * d10v-opc.c: Add additional information to the opcode
1494 table to help determinine which instructions can be done
1497 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1499 * mpw-make.sed: Update editing of include pathnames to be
1502 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1504 * arm-opc.h: Added "bx" instruction definition.
1506 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1508 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1510 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1512 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1514 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1516 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1518 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1520 * makefile.vms: Update for alpha-opc changes.
1522 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1524 * i386-dis.c (print_insn_i386): Actually return the correct value.
1525 (ONE, OP_ONE): #ifdef out; not used.
1527 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1529 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1530 Changed subi operand type to treat 0 as 16.
1532 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1534 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1537 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1539 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1540 memory transfer instructions. Add new format string entries %h and %s.
1541 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1544 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1546 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1547 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1549 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1551 * alpha-dis.c (print_insn_alpha_osf): Remove.
1552 (print_insn_alpha_vms): Remove.
1553 (print_insn_alpha): Make globally visible. Chose the register
1554 names based on info->flavour.
1555 * disassemble.c: Always return print_insn_alpha for the alpha.
1557 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1559 * d10v-dis.c (dis_long): Handle unknown opcodes.
1561 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1563 * d10v-opc.c: Changes to support signed and unsigned numbers.
1564 All instructions with the same name that have long and short forms
1565 now end in ".l" or ".s". Divs added.
1566 * d10v-dis.c: Changes to support signed and unsigned numbers.
1568 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1570 * d10v-dis.c: Change all functions to use info->print_address_func.
1572 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1574 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1575 move ccr/sr insns more strict so that the disassembler only
1576 selects them when the addressing mode is data register.
1578 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1579 * d10v-opc.c (pre_defined_registers): Declare.
1580 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1581 to pick a better name for the registers.
1583 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1585 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1586 operands for fexpand and fpmerge. From Christian Kuehnke
1587 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1589 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1591 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1592 print routine. Take new regnames and cpumask arguments.
1593 Kill the environment variable nonsense.
1594 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1595 (print_insn_alpha_vms): New function. Do VMS style regnames.
1596 * disassemble.c (disassembler): Test bfd flavour to pick
1597 between OSF and VMS routines. Default to OSF.
1599 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1601 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1602 * configure: Rebuild.
1603 * Makefile.in (install): Use @INSTALL_SHLIB@.
1605 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1607 * configure: (bfd_d10v_arch) Add new case.
1608 * configure.in: (bfd_d10v_arch) Add new case.
1609 * d10v-dis.c: New file.
1610 * d10v-opc.c: New file.
1611 * disassemble.c (disassembler) Add entry for d10v.
1613 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1615 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1616 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1618 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1620 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1621 distinguish between variants of the instruction set.
1622 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1623 distinguish between variants of the instruction set.
1625 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1627 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1628 the 8086 instruction set.
1629 * i386-dis.c: General cleanups. Make most things static. Add
1630 prototypes. Get rid of static variables aflags and dflags. Pass
1631 them as args (to almost everything).
1633 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1635 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1637 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1639 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1640 if the next arg is marked with SRC_IN_DST. Gross.
1642 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1643 we're looking for and find EXR.
1645 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1646 if we're looking for KBIT and we don't find it.
1648 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1651 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1652 3bit immediate operands.
1654 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1656 * Released binutils 2.7.
1658 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1659 <kkaempf@progis.ac-net.de>.
1661 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1663 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1665 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1667 * sparc-dis.c (print_insn_sparclite): New routine to print
1668 sparclite instructions.
1670 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1672 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1674 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1676 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1677 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1678 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1680 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1682 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1683 Use autoconf-set values.
1684 (docdir, oldincludedir): Removed.
1685 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1687 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1689 * alpha-opc.c: New file.
1690 * alpha-opc.h: Remove.
1691 * alpha-dis.c: Complete rewrite to use new opcode table.
1692 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1693 * configure: Rebuild with autoconf 2.10.
1694 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1695 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1697 (alpha-opc.o): New target.
1699 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1701 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1702 Set imm_added_to_rs1 even if the source and destination register
1705 * sparc-opc.c: Add some two operand forms of the wr instruction.
1707 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1709 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1712 * disassemble.c (disassembler): Handle H8/S.
1713 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1715 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1717 * sparc-opc.c: Add beq/teq as aliases for be/te.
1719 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1720 <sergei@msil.sps.mot.com>.
1722 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1724 * makefile.vms: New file.
1726 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1728 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1730 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1733 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1735 * i386-dis.c (OP_OFF): Call append_prefix.
1737 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1739 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1740 unsigned long to silence a warning from the Solaris PowerPC
1743 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1745 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1747 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1749 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1751 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1752 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1753 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1754 cpush, cpusha, cpull sparclet insns.
1756 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1758 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1760 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1762 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1763 Set F_FLOAT on other floating point instructions.
1765 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1767 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1769 (powerpc_opcodes): Add 860/821 specific SPRs.
1771 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1773 * configure.in: Permit --enable-shared to specify a list of
1774 directories. Set and substitute BFD_PICLIST.
1775 * configure: Rebuild.
1776 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1777 uses. Set to @BFD_PICLIST@.
1779 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1781 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1782 not "abs", which may be needed for the absolute in something
1783 like btst #0,@10:8. Print L_3 immediates separately from other
1784 immediates. Change ABSMOV reference to ABS8MEM.
1786 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1788 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1789 (current_arch_mask): New static global.
1790 (compute_arch_mask): New static function.
1791 (print_insn_sparc): Delete sparc_v9_p. New static local
1792 current_mach. Resort opcode table if current_mach changes.
1793 Generalize "insn not supported" test.
1794 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1795 Delete test for v9/!v9.
1796 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1798 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1799 (brfcx): Renamed to FBRX.
1800 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1801 coprocessor mnemonics are not supported on the sparclet).
1802 (condf): Renamed to CONDF.
1803 (SLCBCC2): Delete F_ALIAS flag.
1805 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1807 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1808 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1810 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1812 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1813 that the shared library version number is set correctly.
1815 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1817 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1818 Miles Bader <miles@gnu.ai.mit.edu>.
1819 * configure: Rebuild.
1821 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1823 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1826 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1828 * configure: Rebuild with autoconf 2.8.
1830 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1832 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1833 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1835 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1837 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1838 since they appear as targets in Makefile.in.
1839 * configure: Rebuild.
1841 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1843 * mpw-make.sed: Edit out shared library support bits.
1845 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1847 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1848 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1849 (sparc_opcodes): Add sparclet insns.
1850 (sparclet_cpreg_table): New static local.
1851 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1852 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1854 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1856 * i386-dis.c (index16): New static variable.
1857 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1859 (OP_indirE): Return result of OP_E.
1860 (OP_E): Check for 16 bit addressing mode, and disassemble
1861 correctly. Optimised 32 bit case a little. Don't print
1862 "(base,index,scale)" when sib specifies only an offset.
1864 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1866 * configure.in: Set and substitute SHLIB_DEP.
1867 * configure: Rebuild.
1868 * Makefile.in (SHLIB_DEP): New variable.
1869 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1870 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1871 COMMON_SHLIB, add them to piclist with appropriate modifications.
1872 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1873 here: just use piclist.
1875 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1877 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1878 (print_insn_sparc): Rewrite v9/not-v9 tests.
1879 (compare_opcodes): Likewise.
1880 * sparc-opc.c (MASK_<ARCH>): Define.
1881 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1882 (sparclet,v6notv9): Define.
1883 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1884 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1886 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1888 * configure.in: Call AC_PROG_CC before configure.host.
1889 * configure: Rebuild.
1891 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1893 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1895 * i386-dis.c (onebyte_has_modrm): New static array.
1896 (twobyte_has_modrm): New static array.
1897 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1899 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1901 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1904 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1906 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1909 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1911 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1912 m68010up, not just m68020up | cpu32.
1914 * Makefile.in (SONAME): New variable.
1915 ($(SHLINK)): Make a link to the transformed name, as well.
1916 (stamp-tshlink): New target.
1917 (install): Skip stamp-tshlink during install.
1919 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1921 * configure.in: Call AC_ARG_PROGRAM.
1922 * configure: Rebuild.
1923 * Makefile.in (program_transform_name): New variable.
1924 (install): Transform library name before installing it.
1926 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1928 * i960-dis.c (mem): Add HX dcinva instruction.
1930 Support for building as a shared library, based on patches from
1931 Alan Modra <alan@spri.levels.unisa.edu.au>:
1932 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1933 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1934 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1935 * configure: Rebuild.
1936 * Makefile.in (ALLLIBS): New variable.
1937 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1938 (COMMON_SHLIB, SHLINK): New variables.
1939 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1940 (STAGESTUFF): Remove variable.
1941 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1942 (stamp-piclist, piclist): New targets.
1943 ($(SHLIB), $(SHLINK)): New targets.
1944 ($(OFILES)): Depend upon stamp-picdir.
1945 (disassemble.o): Build twice if PICFLAG is set.
1946 (MOSTLYCLEAN): Add pic/*.o.
1947 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1948 (distclean): Remove pic and stamp-picdir.
1949 (install): Install shared libraries.
1950 (stamp-picdir): New target.
1952 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1954 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1955 Print unknown instruction as "unknown", rather than in hex.
1957 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1959 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1961 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1963 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1965 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1967 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1968 when necessary. From Ulrich Drepper
1969 <drepper@myware.rz.uni-karlsruhe.de>.
1971 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1973 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1974 sparc_num_opcodes. Update architecture enum values.
1975 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1976 (sparc_opcode_lookup_arch): New function.
1977 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1978 (sparc_opcodes): Add v9a shutdown insn.
1980 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1982 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1983 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1985 (print_insn_sparc64): Deleted.
1986 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1989 * sparc-opc.c (architecture_pname): Add v9a.
1991 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1993 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1994 incorrectly defined as 0x16 when it should be 0x15.
1995 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1996 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1997 excb (exception barrier) which is defined in the Alpha
1998 Architecture Handbook version 2.
1999 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2000 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2001 disassembled as or, for example.
2003 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2005 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2006 (_print_insn_mips): Change i from int to unsigned int.
2008 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2010 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2011 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2013 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2015 * i386-dis.c: Added Pentium Pro instructions.
2017 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2019 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2022 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2024 * sh-opc.h (sh_nibble_type): Added REG_B.
2025 (sh_arg_type): Added A_REG_B.
2026 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2028 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2030 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2032 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2034 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2036 * Makefile.in (distclean): Remove stamp-h. From Ronald
2037 F. Guilmette <rfg@monkeys.com>.
2039 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2041 From David Mosberger-Tang <davidm@azstarnet.com>:
2042 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2045 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2047 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2048 (sh_table): Added many SH3 opcodes.
2049 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2051 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2053 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2054 (subco,subco.): Mark this PPC, not PPCCOM.
2056 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2058 * configure: Rebuild with autoconf 2.7.
2060 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2062 * configure: Rebuild with autoconf 2.6.
2064 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2066 * configure.in: Sort list of architectures. Accept but do nothing
2067 for alliant, convex, pyramid, romp, and tahoe.
2069 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2071 * a29k-dis.c (print_special): Change num to unsigned int.
2073 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2075 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2078 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2080 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2081 * configure: Rebuilt.
2083 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2085 * configure.in: Add case for bfd_i860_arch.
2086 * configure: Rebuild.
2088 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2090 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2091 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2092 (NEXTDOUBLE): Likewise.
2093 (print_insn_m68k): Don't match fmoveml if there is more than one
2094 register in the list.
2095 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2097 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2099 * m68k-opc.c: Use #W rather than #w.
2100 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2102 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2104 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2105 and likewise for all the dbxx opcodes.
2107 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2109 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2111 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2113 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2114 the VR4100 specific instructions to the mips_opcodes structure.
2116 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2118 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2119 ugly Metrowerks bug in CW6, is fixed in CW7.
2121 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2123 * ppc-opc.c (whole file): Add flags for common/any support.
2125 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2127 * Makefile.in (BISON): Remove macro.
2128 (FLAGS_TO_PASS): Remove BISON.
2130 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2132 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2134 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2135 instructions that take no args by looking at the match mask.
2136 (print_insn_arg): Always print "%" before register names.
2137 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2138 [case '_']: Don't print "@#" before address.
2139 [case 'J']: Use "%s" as format string, not register name.
2140 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2142 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2144 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2147 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2149 From David Mosberger-Tang <davidm@azstarnet.com>
2151 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2152 (alpha_insn_set): added definitions for VAX floating point
2153 instructions (Unix compilers don't generate these, but handcoded
2154 assembly might still use them).
2156 * alpha-dis.c (print_insn_alpha): added support for disassembling
2157 the miscellaneous instructions in the Alpha instruction set.
2159 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2161 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2162 no longer create sysdep.h, sed ppc-opc.c to work around a
2163 serious Metrowerks C bug.
2164 * mpw-make.in: Remove.
2165 * mpw-make.sed: New file, used by mpw-configure to edit
2166 Makefile.in into an MPW makefile.
2168 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2170 * Makefile.in (maintainer-clean): New synonym for realclean.
2172 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2174 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2175 which use '0', '1', and '2' instead. Specify the proper size for
2176 a pmove immediate operand. Correct the pmovefd patterns to be
2177 moves to a register, not from a register.
2178 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2180 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2182 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2183 %psr, %wim, %tbr as F_NOTV9.
2185 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2187 * Makefile.in (Makefile): Just rebuild Makefile when running
2189 (config.h, stamp-h): New targets.
2190 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2191 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2192 rebuilding config.h.
2193 * configure: Rebuild.
2195 * mips-opc.c: Change unaligned loads and stores with "t,A"
2196 operands to use "t,A(b)".
2198 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2200 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2202 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2204 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2205 until 3 instead of until 2.
2207 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2209 * Makefile.in (ALL_CFLAGS): Define.
2210 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2211 (MOSTLYCLEAN): Add config.log.
2212 (distclean): Don't remove config.log.
2213 * configure.in: Substitute HDEFINES.
2214 * configure: Rebuild.
2216 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2218 * sh-opc.h (sh_arg_type): Add F_FR0.
2219 (sh_table, case fmac): Add F_FR0 as first argument.
2221 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2223 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2225 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2227 * sparc-dis.c: Remove all references to NO_V9.
2229 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2231 * aclocal.m4: Just include ../bfd/aclocal.m4.
2232 * configure: Rebuild.
2234 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2236 * sparc-dis.c (X_DISP19): Define.
2237 (print_insn, case 'G'): Use it.
2238 (print_insn, case 'L'): Sign extend displacement.
2240 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2242 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2243 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2244 host_makefile_frag or frags.
2245 * aclocal.m4: New file.
2246 * configure: Rebuild.
2247 * Makefile.in (INSTALL): Set to @INSTALL@.
2248 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2249 (INSTALL_DATA): Set to @INSTALL_DATA@.
2251 (AR_FLAGS): Set to rc rather than qc.
2252 (CC): Define as @CC@.
2253 (CFLAGS): Set to @CFLAGS@.
2254 (@host_makefile_frag@): Remove.
2255 (config.status): Remove dependency upon @frags@.
2257 * configure.in: ../bfd/config.bfd now just sets shell variables.
2258 Use them rather than looking through target Makefile fragments.
2259 * configure: Rebuild.
2261 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2263 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2265 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2267 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2268 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2271 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2272 (lookup_{name,value}): New functions.
2273 (prefetch_table): New static local.
2274 (sparc_{encode,decode}_prefetch): New functions.
2275 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2277 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2279 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2282 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2284 * sh-dis.c: Correct comment on first line of file.
2286 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2288 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2290 * sparc-opc.c (asi, membar): New static locals.
2291 (sparc_{encode,decode}_{asi,membar}): New functions.
2292 (sparc_opcodes, membar insn): Fix.
2293 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2294 Support decoding of membar masks.
2297 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2299 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2301 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2303 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2304 and likewise for the other branches. Add bhs as an alias for bcc,
2305 and likewise for the size variants. Add dbhs as an alias for
2308 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2310 * sh-opc.h (FP sts instructions): Update to match reality.
2312 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2314 * m68k-dis.c: (fpcr_names): Add % before all register names.
2315 (reg_names): Likewise.
2316 (print_insn_arg): Don't explicitly print % before register names.
2317 Add % before register names in static array names. In case 'r',
2318 print data registers as `@(Dn)', not `Dn@'. When printing a
2319 memory address, don't print @# before it.
2320 (print_indexed): Change base_disp and outer_disp from int to
2321 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2322 syntax. Sign extend 8 byte displacement correctly.
2323 (print_base): Print using MIT syntax. Print zpc when appropriate.
2324 Change parameter disp from int to bfd_vma.
2326 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2329 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2331 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2332 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2333 * sh-opc.h (sh_arg_type): Add new operand types.
2334 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2336 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2338 * Makefile.in (distclean): Remove generated file config.h.
2340 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2342 * Makefile.in (distclean): Remove generated file config.h.
2344 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2346 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2348 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2350 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2351 rather than numopcodes. Use m68k_opcodes rather than removed
2352 opcode function. Don't check F_ALIAS.
2353 (print_insn_arg): Change first parameter to be const char *.
2354 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2355 (m68k-opc.o): New target.
2356 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2357 * configure: Rebuild.
2359 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2361 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2362 (opcode_bits, opcode_hash_table): New variables.
2363 (opcodes_initialized): Renamed from opcodes_sorted.
2364 (build_hash_table): New function.
2365 (is_delayed_branch): Use hash table.
2366 (print_insn): Renamed from print_insn_sparc, made static.
2367 Build and use hash table. If !sparc64, ignore sparc64 insns,
2368 and vice-versa if sparc64.
2369 (print_insn_sparc, print_insn_sparc64): New functions.
2370 (compare_opcodes): Move sparc64 opcodes to end.
2371 Print commutative insns with constant second.
2372 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2374 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2376 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2377 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2378 avoids printing a delay slot in a delay slot.
2379 * sh-opc.h (sh_table): Fully bracket last entry.
2381 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2383 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2385 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2387 * configure.in: Get host_makefile_frag from ${srcdir}.
2389 * configure.in: Autoconfiscated. Check for string[s].h. Create
2390 config.h from config.in. Don't set up sysdep.h link.
2391 * sysdep.h: New file.
2392 * configure, config.in: New files, generated from configure.in.
2393 * Makefile.in: Updated to be processed autoconf-style.
2394 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2395 (Makefile): Depend on config.status.
2396 (config.status): New rule.
2397 * configure.bat: Update Makefile substitutions.
2399 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2401 * mips-opc.c (L1): Define.
2402 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2403 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2406 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2408 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2409 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2410 have multiple add units but only a single logical unit.
2412 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2413 shifted by 18, without any insertion or extraction function.
2414 (insert_cr, extract_cr): Remove.
2416 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2418 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2421 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2423 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2424 * sh-opc.h: Add copyright.
2426 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2428 * Makefile.in (crunch-m68k): Delete extra target accidentally
2429 checked in a while ago.
2431 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2433 * sh-opc.h (sh_table): Add SH3 support.
2435 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2437 * sh-opc.h: Added bsrf and braf.
2439 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2441 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2442 bogus [ls]fm{ea,fd} patterns.
2444 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2445 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2446 initialize it from memory. Make function static.
2447 (print_insn_{big,little}_arm): New functions.
2448 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2449 the correct endianness.
2451 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2453 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2456 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2458 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2459 17th, so that it builds again using GCC as the compiler.
2461 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2463 * mips-dis.c (print_insn_little_mips): Cast return value from
2464 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2465 expects an unsigned long, and that might be fewer words of
2466 argument storage (e.g., if bfd_vma is long long on a 32-bit
2468 (print_insn_big_mips): Likewise with bfd_getb32 value.
2469 (_print_insn_mips): Now static.
2471 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2473 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2474 gcc memory hog problem with initializer is fixed.
2476 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2478 Merge in support for Mac MPW as a host.
2479 (Old change descriptions retained for informational value.)
2481 * mpw-config.in (archname): Compute from the config.
2482 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2484 * mpw-config.in (target_arch): Compute from canonical target.
2485 (m68k, mips, powerpc, sparc): Add architectures.
2486 * mpw-make.in (disassemble.c.o): Add.
2487 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2489 * mpw-config.in (BFD_MACHINES): Set to a default value.
2490 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2492 * mpw-make.in (CSEARCH): Add extra-include to search path.
2494 * mpw-config.in (varargs.h): Don't create.
2495 (sysdep.h): Create using forward-include.
2496 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2498 * mpw-config.in: New file, MPW version of configure.in.
2499 * mpw-make.in: New file, MPW version of Makefile.in.
2501 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2503 * alpha-dis.c (print_insn_alpha): Put empty statement after
2506 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2508 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2509 (low_sign_extend): Likewise.
2510 (get_field): Delete unused function.
2511 (set_field, deposit_14, deposit_21): Likewise.
2513 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2515 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2518 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2520 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2522 * alpha-opc.h (OSF_ASMCODE): define
2523 print pal-code names as defined in App C of the
2524 Alpha Architecture Reference Manual
2526 * alpha-dis.c: cleaned up output
2527 print stylized code forms as defined in App A.4.3 of the
2528 Alpha Architecture Reference Manual
2530 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2532 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2534 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2537 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2539 * m68k-dis.c (opcode): New function. Returns address of opcode
2540 table entry given index, even if the opcode table was split to
2541 work around gcc bugs.
2542 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2544 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2545 (reg_names): Now const.
2546 (print_insn_arg): Arrays cacheFieldName and names now const.
2547 (print_indexed): Array scales now const.
2549 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2551 * ppc-opc.c: Sort recently added instructions by minor opcode
2552 number within major opcode number.
2554 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2556 * hppa-dis.c: Include libhppa.h.
2558 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2560 * mips-opc.c: Change dli to use M_DLI, and add dla.
2562 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2564 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2566 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2568 * mips-opc.c: Add r4650 mul instruction.
2570 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2572 * mips-opc.c: Add uld and usd macros for unaligned double load and
2575 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2577 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2578 mfdcr, mtdcr, icbt, iccci.
2580 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2582 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2583 signed char fields to shorts, more portable.
2585 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2587 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2588 char fields as signed chars, since they may have negative values.
2590 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2592 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2593 (mycroft@netbsd.org).
2595 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2597 From "Logg, Ed" <elogg@ea.com>:
2598 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2599 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2602 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2604 * ppc-opc.c: Changes based on patch from David Edelsohn
2605 <edelsohn@mhpcc.edu>.
2606 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2609 (insert_tbr): New static function.
2610 (extract_tbr): New static function.
2611 (XFXFXM_MASK, XFXM): Define.
2612 (XSPRBAT_MASK, XSPRG_MASK): Define.
2613 (powerpc_opcodes): Add instructions to access special registers by
2614 name. Add mtcr and mftbu.
2616 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2618 * mips-opc.c (P3): Define.
2619 (mips_opcodes): Add mad and madu.
2621 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2623 * configure.in: Add W65 support.
2624 * disassemble.c: Likewise.
2625 * w65-opc.h, w65-dis.c: New files.
2627 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2629 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2632 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2634 * mips-opc.c: Add dli as a synonym for li.
2636 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2638 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2639 print something for reserved opcode values, even if it won't
2642 * mips-dis.c (_print_insn_mips): When initializing, shift right
2643 and mask, to avoid sign extension problems on the Alpha.
2645 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2648 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2650 * sh-opc.h (mov.l gbr): Get direction right.
2651 * sh-dis.c (print_insn_shx): New function.
2652 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2653 print opcodes with right byte order.
2655 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2657 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2658 to avoid conflicts with getopt.
2660 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2662 * hppa-dis.c (print_insn_hppa): Read the instruction using
2663 bfd_getb32, so that it works on a little endian or 64 bit host.
2664 Remove unused local variable op.
2666 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2668 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2669 addu does not work correctly if -mips3.
2671 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2673 * a29k-dis.c (print_special): Add special register names defined
2674 on 29030, 29040 and 29050.
2675 (print_insn): Handle new operand type 'I'.
2677 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2679 * Makefile.in (INSTALL): Use top level install.sh script.
2681 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2683 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2684 that it works on a little endian host.
2686 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2688 * configure.in: Use ${config_shell} when running config.bfd.
2690 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2692 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2694 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2696 * a29k-dis.c (print_insn): Print the opcode.
2698 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2700 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2702 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2704 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2706 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2708 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2709 which store a value into memory.
2711 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2713 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2714 * arm-dis.c, arm-opc.h: New files.
2716 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2718 * Makefile.in (ns32k-dis.o): Add dependency.
2719 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2720 string, not as array of chars.
2722 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2724 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2726 * sparc-opc.c: Added sparclite extended FP operations, and
2727 versions of v9 impdep* instructions permitting specification of
2730 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2732 * i960-dis.c (reg_names): Now const.
2733 (struct sparse_tabent): New type, copied from array type in mem
2735 (ctrl): Local static array ctrl_tab now const.
2736 (cobr): Local static array cobr_tab now const.
2737 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2738 static variable mem_tab no longer explicitly initialized. Changed
2739 mem_init to const array of struct sparse_tabent.
2740 (reg): Local static variable reg_tab no longer explicitly
2741 initialized. Changed reg_init to const array of struct
2743 (ea): Local static array scale_tab now const.
2745 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2748 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2750 * configure.bat: the disassember needs to be enabled for
2751 "objdump -d" to work in djgpp.
2753 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2755 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2756 (invalid_float): Enabled general version, doesn't require running
2757 on ns32k host. Changed to take char* argument, and test for
2758 explicitly specified sizes, instead of using sizeof() on host CPU
2760 (INVALID_FLOAT): Cast first argument.
2761 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2762 list_P032, list_M032): Now const.
2763 (optlist, list_search): Made appropriate arguments now point to
2765 (print_insn_arg): Changed static array of one-character-string
2766 pointers into a static const array of characters; fixed sprintf
2767 statement accordingly.
2769 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2771 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2772 from distribution. A ns32k-dis.c from a previous distribution has
2773 been brought up to date and supports the new interface.
2775 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2777 * configure.in: add bfd_ns32k_arch target support.
2779 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2780 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2782 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2784 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2787 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2789 * h8300-dis.c, mips-dis.c: Don't use true and false.
2791 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2793 * configure.in: Change --with-targets to --enable-targets.
2795 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2797 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2798 opcodes to the first instruction with that opcode, to speed
2799 disassembly of large files. From ralphc@pyramid.com (Ralph
2802 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2804 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2806 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2808 * configure.bat: update to latest makefile.in
2810 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2812 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2813 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2814 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2815 slot insn is in a delay slot.
2816 * z8k-opc.h: (resflg): Fix patterns.
2817 * h8500-opc.h Fix CR insn patterns.
2819 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2821 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2822 "cmpl" before POWER versions, so that gas -many uses them.
2824 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2826 * disassemble.c: New file.
2827 * Makefile.in (OFILES): Add disassemble.o.
2828 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2829 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2830 binutils/configure.in.
2832 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2833 opcode being examined.
2835 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2837 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2838 (insert_ral, insert_ram, insert_ras): New functions.
2839 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2840 RAS for store with update.
2842 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2844 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2845 (edelsohn@npac.syr.edu).
2847 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2849 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2852 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2854 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2856 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2858 * ppc-opc.c (powerpc_operands): The signedp field has been
2859 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2860 instead. Add new operand SISIGNOPT.
2861 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2862 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2863 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2866 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2868 * i386-dis.c (struct private): Renamed to dis_private. `private'
2869 is a reserved word for dynix cc.
2871 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2873 * configure.in: Change error message to refer to bfd/config.bfd
2874 rather than bfd/configure.in.
2876 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2878 * ppc-opc.c: Define POWER2 as short alias flag.
2879 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2882 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2884 * i960-dis.c (print_insn_i960): Don't read a second word for
2885 opcodes 0, 1, 2 and 3.
2887 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2889 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2891 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2893 * m68881-ext.c: Removed; no longer used.
2894 * Makefile.in: Changed accordingly.
2896 * m68k-dis.c (ext_format_68881): Don't declare.
2897 (print_insn_m68k): If an instruction uses place 'i', it uses at
2898 least four fixed bytes.
2899 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2900 extended float, convert to double using floatformat_to_double, not
2901 ieee_extended_to_double, and fetch the data before converting it.
2903 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2905 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2906 davidj@ICSI.Berkeley.EDU (David Johnson).
2908 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2910 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2911 PowerPC uses bdnz[l][a].
2913 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2915 * dis-buf.c, i386-dis.c: Include sysdep.h.
2917 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2919 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2921 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2922 by Motorola PowerPC 601 with PPC_OPCODE_601.
2923 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2924 Disassemble Motorola PowerPC 601 instructions as well as normal
2925 PowerPC instructions.
2927 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2929 * i960-dis.c (reg, mem): Just use a static array instead of
2932 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2934 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2935 condition name index if this is for a negated condition.
2937 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2938 Floating point format for 'H' operand is backwards from normal
2939 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2940 operands (fmpyadd and fmpysub), handle bizarre register
2941 translation correctly for single precision format.
2943 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2944 or 'I' operands if the next format specifier is 'M' (fcmp
2945 condition completer).
2947 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2949 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2950 single number giving a bitmask for the MB and ME fields of an M
2951 form instruction. Change NB to accept 32, and turn it into 0;
2952 also turn 0 into 32 when disassembling. Seperated SH from NB.
2953 (insert_mbe, extract_mbe): New functions.
2954 (insert_nb, extract_nb): New functions.
2955 (SC_MASK): Mask out SA and LK bits.
2956 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2957 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2958 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2959 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2960 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2961 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2962 (powerpc_macros): Define table of macro definitions.
2963 (powerpc_num_macros): Define.
2965 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2966 if PPC_OPERAND_NEXT is set.
2968 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2970 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2971 char. Retrieve contents using bfd_getl32 instead of shifting.
2973 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2975 * ppc-opc.c: New file. Opcode table for PowerPC, including
2976 opcodes for POWER (RS/6000).
2977 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2978 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2979 (CFILES): Add ppc-dis.c.
2980 (ppc-dis.o, ppc-opc.o): New targets.
2981 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2983 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2985 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2986 No space before 'u', 'f', or 'N'.
2988 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2990 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2991 farther than we should.
2993 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2995 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2997 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2999 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3001 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3002 needs it, to prevent reading past the end of a section.
3004 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3006 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3007 Removed t,A case for la; always use t,A(b) case.
3009 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3011 From Ted Lemen <mellon@pepper.ncd.com>
3012 * mips-dis.c (print_insn_arg): Handle 'k'.
3013 * mips-opc.c: Make cache use k, not t.
3015 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3017 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3018 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3019 FLOAT_FORMAT_CODE to put out floating point register names.
3021 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3023 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3025 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3027 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3029 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3031 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3032 larger than 32. Moved dsxx32 variants first for disassembler.
3034 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3036 * z8kgen.c, z8k-opc.h: Add full lda information.
3038 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3040 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3041 movb instructions. Any necessary space will be emitted by
3042 the code to handle nullification completers.
3044 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3046 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3048 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3050 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3051 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3053 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3055 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3057 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3059 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3060 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3062 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3064 * m88k-dis.c (m88kdis): comment change. Remove space after
3066 (printop): handle new arg types DEC and XREG for m88110.
3068 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3070 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3071 type for absolute branch addresses. Delete special
3072 "ble" and "be" code in 'W' operand code.
3074 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3076 * mips-opc.c: Set hazard information correctly for branch
3077 likely instructions.
3079 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3081 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3082 info->fprintf_func for printing and info->print_address_func for
3085 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3087 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3089 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3091 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3092 Corrected second case of "b" for disassembler.
3094 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3096 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3097 to BFD swapping routines to correspond to BFD name changes.
3099 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3101 * mips-opc.c: Change div machine instruction to be z,s,t rather
3102 than s,t. Change div macro to be d,v,t rather than d,s,t.
3103 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3104 rem and remu which generates only the corresponding div
3105 instruction. This is for compatibility with the MIPS assembler,
3106 which only generates the simple machine instruction when an
3107 explicit destination of $0 is used.
3108 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3110 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3112 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3113 WR_31 hazard for bal, bgezal, bltzal.
3115 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3117 * hppa-dis.c (print_insn_hppa): Use print function
3118 from within the disassemble_info, not fprintf_filtered.
3120 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3122 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3123 Law, law@cs.utah.edu.)
3125 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3127 * mips-opc.c ("absu"): Removed.
3130 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3132 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3133 Changed hazard information to distinguish between memory load
3134 delays and coprocessor load delays.
3136 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3138 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3140 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3142 * configure.in: Don't pass cpu to config.bfd.
3144 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3146 * m88k-dis.c (m88kdis): Make class unsigned.
3148 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3150 * alpha-dis.c (print_insn_alpha): One branch format case was
3151 missing the instruction name.
3153 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3155 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3156 Add the arch-specific auxiliary files.
3157 (OFILES): Remove the arch-specific auxiliary files
3158 and use BFD_MACHINES instead of DIS_LIBS.
3159 * configure.in: Set BFD_MACHINES based on --with-targets option.
3161 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3163 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3166 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3168 * sparc-opc.c: Change CONST to const to deal with gcc
3169 -Dconst=__const -traditional.
3171 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3173 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3174 coprocessor instructions out of #if 0, and made them use new
3177 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3179 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3181 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3183 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3184 instruction, for use by the disassembler.
3186 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3187 hand-coded sign extensions that depended on 32-bit host ints.
3188 FIXME, we still depend on big-endian host bitfield ordering.
3189 (sparc_print_insn): Set the insn_info_valid field, and the
3190 other fields that describe the instruction being printed.
3192 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3194 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3195 `jmp' instead of just one of them.
3197 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3199 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3200 (fput_fp_reg_r): Renamed from fput_reg_r.
3201 (fput_fp_reg): New function.
3202 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3204 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3206 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3208 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3210 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3212 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3213 don't output a space.
3215 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3217 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3219 * mips-opc.c: New file, containing opcode table from
3220 ../include/opcode/mips.h.
3221 * Makefile.in: Add it.
3223 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3225 * m88k-dis.c: New file, moved in from gdb and changed to use the
3226 new dis-asm.h disassembler interface.
3227 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3228 (m88k-dis.o): New target.
3230 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3232 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3233 argument string const char * to correspond to opcode/mips.h.
3235 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3237 * mips-dis.c: Updated to account for name changes in new version
3239 * Makefile.in: Added header file dependencies.
3241 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3243 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3245 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3247 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3248 extend, rather than shifts.
3250 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3252 * Makefile.in: Undo 15 June change.
3254 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3256 * m68k-dis.c (print_insn_arg): Change return value to byte count
3258 * m68k-dis.c: Re-write to detect invalid operands before
3259 printing anything, so we can handle this the same way we
3260 handle invalid opcodes.
3262 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3264 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3266 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3268 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3271 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3273 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3275 * configure.in: Do make sysdep.h link.
3276 * Makefile.in: Search ../include. Don't search ../bfd.
3278 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3280 Changes from Jeff Law, law@cs.utah.edu:
3281 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3282 Do not print a space before the completers specified by
3285 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3287 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3288 defined, since gdb has been fixed.
3290 Changes from Jeff Law, law@cs.utah.edu:
3291 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3292 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3293 be a *disassemble_info, not a *FILE.
3294 * hppa-dis.c: Support 'd', '!', and 'a'.
3295 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3296 * hppa-dis.c: Delete cases which are no longer needed.
3298 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3300 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3302 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3304 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3307 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3309 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3310 * configure.in: No longer need to configure to get sysdep.h.
3312 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3314 * Patches from Jeffrey Law <law@cs.utah.edu>.
3315 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3316 templates for 1.1 FP computational instructions.
3318 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3320 * h8500-dis.c (print_insn_h8500): Address argument is type
3322 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3325 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3326 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3328 * sparc-dis.c (compare_opcodes): Move static declaration to
3331 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3333 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3334 instruction, remove unimp hack from 'l' argument.
3336 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3338 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3341 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3343 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3344 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3347 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3349 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3350 arrays of string pointers to 2-d arrays of chars, to save
3353 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3355 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3356 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3358 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3360 * hppa-dis.c: New file from Utah, adapted to new disassembler
3362 * Makefile.in: Include it.
3364 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3366 * sh-dis.c, sh-opc.h: New files.
3368 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3370 * alpha-dis.c, alpha-opc.h: New files.
3372 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3374 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3377 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3379 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3381 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3383 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3386 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3388 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3389 and double percent signs a few places.
3391 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3393 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3394 Use info->print_address_func not print_address.
3396 * dis-buf.c (generic_print_address): New function.
3398 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3400 * Makefile.in: Add sparc-dis.c.
3401 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3403 Add `add' instruction to the set that get checked
3404 for a preceding `sethi' in order to print an absolute address.
3405 * (print_insn): Disassembly prefers real instructions.
3406 (is_delayed_branch): Speed up.
3407 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3408 Still missing some float ops, and needs testing.
3409 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3410 F_ALIAS. Use printf, not fprintf, when not passing a file
3412 (compare_opcodes): Check that identical instructions have
3413 identical opcodes, complain otherwise.
3416 * Include reg_names.
3418 Use dis-asm.h/read_memory_func interface.
3420 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3422 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3423 deliberately return non-zero to setjmp from longjmp. Otherwise
3424 this code fails to compile.
3426 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3428 * m68k-dis.c: Fix prototype for fetch_arg().
3430 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3432 * dis-buf.c: New file, for new read_memory_func interface.
3433 Makefile.in (OFILES): Include it.
3434 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3435 Use new read_memory_func interface.
3437 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3439 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3440 * h8500-opc.h: Fix couple of opcodes.
3442 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3444 * Makefile.in: add dvi & installcheck targets
3446 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3448 * Makefile.in: Update for h8500-dis.c.
3450 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3452 * h8500-dis.c, h8500-opc.h: New files
3454 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3456 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3457 ../include/dis-asm.h.
3458 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3459 and ../gdb/m68k-pinsn.c).
3460 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3461 and ../gdb/i386-pinsn.c).
3462 * m68881-ext.c: New file. Moved definition of
3463 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3464 * Makefile.in: Adjust for new files.
3465 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3466 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3467 can be dis-assembled.
3469 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3471 * mips-dis.c (print_insn_arg): Now returns void.
3473 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3475 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3476 files that use the macros.
3478 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3480 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3481 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3482 (CFILES): Added mips-dis.c.
3484 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3486 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3487 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3489 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3491 * Makefile.in: Improve *clean rules.
3492 * configure.in: Allow a default host.
3494 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3496 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3497 files include other sysdep files
3499 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3501 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3503 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3505 * configure.in: For host support, use ../bfd/configure.host
3506 so it stays in sync with the ../bfd/hosts database.
3508 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3510 * configure.in: use cpu-vendor-os triple instead of nested cases
3512 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3514 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3515 *always* the wrong one.
3517 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3519 * z8kgen.c: added copyright info
3521 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3523 * z8k-dis.c (unparse_instr): prettier tabs
3524 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3526 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3528 * configure.in: Add ncr* configuration.
3529 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3530 picayune ANSI compilers happy.
3532 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3534 * configure.in (i386): Make i386 and i486 synonymous for now.
3535 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3537 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3539 * Makefile.in (install): Fix typo.
3541 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3543 * Makefile.in (make): Remove obsolete crud.
3544 (sparc-opc.o): Avoid Sun Make VPATH bug.
3546 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3548 * Makefile.in: since there are no SUBDIRS, remove rule and
3549 references of subdir_do.
3551 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3553 * Makefile.in (install): Get the library name right here too.
3554 Don't install bfd.h, since it's unrelated to this library. No
3555 subdirs to recurse into, either.
3556 (CFILES): The source file has a .c suffix, not .o.
3558 * sparc-opc.c: New file, moved from BFD.
3559 * Makefile.in (OFILES): Build it.
3561 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3563 * z8k-dis.c: fixed forward refferences of some declarations.
3565 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3567 * Makefile.in: get the name of the library right
3569 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3571 * z8k-dis.c: knows how to disassemble z8k stuff
3572 * z8k-opc.h: new file full of z8000 opcodes
3576 version-control: never