1 2000-05-15 Nick Clifton <nickc@cygnus.com>
3 * arm-opc.h: Use upper case for flasg in MSR and MRS
4 instructions. Allow any bit to be set in the field_mask of
7 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
8 field_mask of an MSR instruction.
10 2000-05-11 Thomas de Lellis <tdel@windriver.com>
12 * arm-opc.c: Disassembly of thumb ldsb/ldsh
13 instructions changed to ldrsb/ldrsh.
15 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
17 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
18 target addresses for 'jal' and 'j'.
20 2000-05-10 Geoff Keating <geoffk@cygnus.com>
22 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
23 also available in common mode when powerpc syntax is being used.
25 2000-05-08 Alan Modra <alan@linuxcare.com.au>
27 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
28 (dummy_print_address): Ditto.
30 2000-05-04 Timothy Wall <twall@cygnus.com>
34 * disassemble.c (disassembler): Add ARCH_tic54x.
35 * configure.in: Added tic54x target.
37 * Makefile.am: Add tic54x dependencies.
40 2000-05-03 J.T. Conklin <jtc@redback.com>
42 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
44 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
45 unit instruction formats.
46 (PPCVEC): New macro, mask for vector instructions.
47 (powerpc_operands): Add table entries for above operand types.
48 (powerpc_opcodes): Add table entries for vector instructions.
50 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
51 (print_insn_little_powerpc): Likewise.
52 (print_insn_powerpc): Prepend 'v' when printing vector registers.
54 Sun Apr 23 17:54:14 2000 Denis Chertykov <denisc@overta.ru>
56 * avr-dis.c (reg_fmul_d): New. Extract destination register from
58 (reg_fmul_r): New. Extract source register from FMUL instruction.
59 (reg_muls_d): New. Extract destination register from MULS instruction.
60 (reg_muls_r): New. Extract source register from MULS instruction.
61 (reg_movw_d): New. Extract destination register from MOVW instruction.
62 (reg_movw_r): New. Extract source register from MOVW instruction.
63 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
64 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
66 Mon Apr 24 15:21:35 2000 Clinton Popetz <cpopetz@cygnus.com>
68 * configure.in: Add bfd_powerpc_64_arch.
69 * disassemble.c (disassembler): Use print_insn_big_powerpc for
72 2000-04-24 Nick Clifton <nickc@cygnus.com>
74 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
77 2000-04-22 Timothy Wall <twall@cygnus.com>
79 * ia64-gen.c (general): Add an ordered table of primary
80 opcode names, as well as priority fields to disassembly data
81 structures to enforce a preferred disassembly format based on the
82 ordering of the opcode tables.
83 (load_insn_classes): Show a useful message if IC tables are missing.
84 (load_depfile): Ditto.
85 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
86 distinguish preferred disassembly.
87 * ia64-opc-f.c: Reorder some insn for preferred disassembly
88 format. Fix incorrect flag on fma.s/fma.s.s0.
89 * ia64-opc.c: Scan *all* disassembly matches and use the one with
91 * ia64-opc-b.c: Use more abbreviations.
92 * ia64-asmtab.c: Regenerate.
94 Fri Apr 21 16:03:39 2000 Jason Eckhardt <jle@cygnus.com>
96 * hppa-dis.c (extract_16): New function.
97 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
98 new operand types l,y,&,fe,fE,fx.
100 Fri Apr 21 13:20:53 2000 Richard Henderson <rth@cygnus.com>
101 David Mosberger <davidm@hpl.hp.com>
102 Timothy Wall <twall@cygnus.com>
103 Bob Manson <manson@charmed.cygnus.com>
104 Jim Wilson <wilson@cygnus.com>
106 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
107 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
108 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
110 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
111 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
112 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
113 * Makefile.in: Rebuild.
115 * configure.in (bfd_ia64_arch): New target.
116 * disassemble.c (ARCH_ia64): Define.
117 (disassembler): Support ARCH_ia64.
118 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
119 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
120 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
121 ia64-war.tbl, ia64-waw.tbl): New files.
123 2000-04-20 Alexandre Oliva <aoliva@cygnus.com>
125 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
126 (disassemble): Use them.
128 2000-04-14 Alan Modra <alan@linuxcare.com.au>
130 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
131 * Makefile.am: Update dependencies.
132 * Makefile.in: Regenerate.
134 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
136 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
137 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
138 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
139 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
140 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
141 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
142 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
143 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
144 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
145 ansidecl.h as sysdep.h includes it.
147 Fri Apr 7 15:56:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
149 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
150 --enable-build-warnings option.
151 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
152 * Makefile.in, configure: Re-generate.
154 Wed Apr 5 22:28:18 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
156 * sh-opc.c (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
157 stc GBR,@-<REG_N> is available for arch_sh1_up.
158 Group parallel processing insn with identical mnemonics together.
159 Make three-operand psha / pshl come first.
161 Wed Apr 5 22:05:40 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
163 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
164 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
165 (sh_arg_type): Add A_PC.
166 (sh_table): Update entries using immediates. Add repeat.
167 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
168 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
170 2000-04-04 Alan Modra <alan@linuxcare.com.au>
172 * po/opcodes.pot: Regenerate.
174 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
175 (DEP): Quote when passing vars to sub-make. Add warning message
177 (DEP1): Rewrite for "gcc -MM".
178 (CLEANFILES): Add DEP2.
180 * Makefile.in: Regenerate.
182 2000-04-03 Denis Chertykov <denisc@overta.ru>
184 * avr-dis.c: Syntax cleanup.
185 (add0fff): Print the pc relative address as a signed number.
188 2000-04-01 Ian Lance Taylor <ian@zembu.com>
190 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
191 the parameter ATTRIBUTE_UNUSED.
192 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
194 2000-04-01 Alexandre Oliva <aoliva@cygnus.com>
196 * m10300-opc.c: SP-based offsets are always unsigned.
198 2000-03-29 Thomas de Lellis <tdel@windriver.com>
200 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
201 [branch always] instead of "undefined".
203 2000-03-27 Nick Clifton <nickc@cygnus.com>
205 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
206 short instructions, from end of list of long instructions.
208 2000-03-27 Ian Lance Taylor <ian@zembu.com>
210 * Makefile.am (CFILES): Add avr-dis.c.
211 (ALL_MACHINES): Add avr-dis.lo.
213 2000-03-27 Alan Modra <alan@linuxcare.com>
215 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
217 (print_insn_avr): Call function via pointer in K&R compatible way.
218 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
219 add0fff, add03f8): Convert to old style function declaration and
221 (avrdis_opcode): Add prototype.
223 2000-03-27 Denis Chertykov <denisc@overta.ru>
225 * avr-dis.c: New file. AVR disassembler.
226 * configure.in (bfd_avr_arch): New architecture support.
227 * disassemble.c: Likewise.
228 * configure: Regenerate.
230 Mon Mar 6 19:52:05 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
232 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
234 2000-03-02 J"orn Rennecke <amylaar@cygnus.co.uk>
236 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
237 flag to determine if operand is pc-relative.
240 (REL6S3): Renamed from IMM6S3.
241 Added flag OPERAND_PCREL.
242 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
243 added flag OPERAND_PCREL.
244 (IMM12S3U): Replaced with REL12S3.
245 (SHORT_D2, LONG_D): Delay target is pc-relative.
246 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
247 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
248 using the REL* operands.
249 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
250 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
251 LONG_Db, using REL* operands.
252 (SHORT_U, SHORT_A5S): Removed stray alternatives.
253 (d30v_opcode_table): Use new *r formats.
255 2000-02-28 Nick Clifton <nickc@cygnus.com>
257 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
258 'signed_overflow_ok_p'.
260 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
262 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
263 name of the libtool directory.
264 * Makefile.in: Rebuild.
266 2000-02-24 Nick Clifton <nickc@cygnus.com>
268 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
269 (cgen_clear_signed_overflow_ok): New function.
270 (cgen_signed_overflow_ok_p): New function.
272 2000-02-23 Andrew Haley <aph@cygnus.com>
274 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
275 m32r-ibld.c,m32r-opc.h: Rebuild.
277 2000-02-23 Linas Vepstas <linas@linas.org>
279 * i370-dis.c, i370-opc.c: New.
281 * disassemble.c (ARCH_i370): Define.
282 (disassembler): Handle it.
284 * Makefile.am: Add support for Linux/IBM 370.
285 * configure.in: Likewise.
287 * Makefile.in: Regenerate.
288 * configure: Likewise.
290 2000-02-22 Chandra Chavva <cchavva@cygnus.com>
292 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
293 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
296 1999-12-30 Andrew Haley <aph@cygnus.com>
298 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
300 * mips-opc.c (G6): New define.
301 (mips_builtin_op): Add "move" definition for -gp32.
303 2000-02-22 Ian Lance Taylor <ian@zembu.com>
305 From Grant Erickson <gerickso@Brocade.COM>:
306 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
308 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
310 * dis-buf.c (buffer_read_memory): Change `length' param and all int
313 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
315 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
316 (print_insn_ppi): Likewise.
317 (print_insn_shx): Use info->mach to select appropriate insn set.
318 Add support for sh-dsp. Remove FD_REG_N support.
319 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
320 (sh_arg_type): Likewise. Remove FD_REG_N.
321 (sh_dsp_reg_nums): New enum.
322 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
323 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
324 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
325 (arch_sh3_dsp_up): Likewise.
326 (sh_opcode_info): New field: arch.
327 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
328 D_REG_N. Fill in arch field. Add sh-dsp insns.
330 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
332 * arm-dis.c: Change flavor name from atpcs-special to
333 special-atpcs to prevent name conflict in gdb.
334 (get_arm_regname_num_options, set_arm_regname_option,
335 get_arm_regnames): New functions. API to access the several
336 flavor of register names. Note: Used by gdb.
337 (print_insn_thumb): Use the register name entry from the currently
338 selected flavor for LR and PC.
340 2000-02-10 Nick Clifton <nickc@cygnus.com>
342 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
344 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
345 "mulsh.h" instructions.
346 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
348 (print_insn_mcore): Add support for little endian targets.
349 Add support for MULSH and OPSR classes.
351 2000-02-07 Nick Clifton <nickc@cygnus.com>
353 * arm-dis.c (parse_arm_diassembler_option): Rename again.
354 Previous delat did not take.
356 2000-02-03 Timothy Wall <twall@redhat.com>
358 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
359 to adjust target address bounds checking and calculate the
360 appropriate octet offset into data.
362 2000-01-27 Nick Clifton <nickc@redhat.com>
364 * arm-dis.c: (parse_disassembler_option): Rename to
365 parse_arm_disassembler_option and allow to be exported.
367 * disassemble.c (disassembler_usage): New function: Print out any
368 target specific disassembler options.
369 Call arm_disassembler_options() if the ARM architecture is being
372 * arm-dis.c (NUM_ELEM): Define this macro if not already
374 (arm_regname): New struct type for ARM register names.
375 (arm_toggle_regnames): Delete.
376 (parse_disassembler_option): Use register name structure.
377 (print_insn): New function: Combines duplicate code found in
378 print_insn_big_arm and print_insn_little_arm.
379 (print_insn_big_arm): Call print_insn.
380 (print_insn_little_arm): Call print_insn.
381 (print_arm_disassembler_options): Display list of supported,
382 ARM specific disassembler options.
384 2000-01-27 Thomas de Lellis <tdel@windriver.com>
386 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
387 ARM_STT_16BIT flag as Thumb code symbols.
389 * arm-dis.c (printf_insn_little_arm): Ditto.
391 2000-01-25 Thomas de Lellis <tdel@windriver.com>
393 * arm-dis.c (printf_insn_thumb): Prevent double dumping
394 of raw thumb instructions.
396 2000-01-20 Nick Clifton <nickc@cygnus.com>
398 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
400 2000-01-03 Nick Clifton <nickc@cygnus.com>
402 * arm-dis.c (streq): New macro.
404 (force_thumb): ew local variable.
405 (parse_disassembler_option): New function: Parse a single, ARM
406 specific disassembler command line switch.
407 (parse_disassembler_option): Call parse_disassembler_option to
408 parse individual command line switches.
409 (print_insn_big_arm): Check force_thumb.
410 (print_insn_little_arm): Check force_thumb.
412 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
414 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
416 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
418 * m10300-opc.c, m10300-dis.c: Add am33 support.
420 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
422 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
423 (print_insn_hppa): Handle 'B' operand.
425 1999-11-22 Nick Clifton <nickc@cygnus.com>
427 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
429 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
431 * mips-opc.c (I5): New.
432 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
433 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
434 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
436 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
438 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
439 * arm-opc.h (print_insn_arm): Added comment documenting
440 the 'X' format just added to arm-dis.c.
442 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
444 * mips-opc.c (la): Create a version that just uses addiu directly.
445 (dla): Expand to daddiu if possible.
447 1999-11-11 Nick Clifton <nickc@cygnus.com>
449 * mips-opc.c: Add ssnop pattern.
451 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
453 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
455 1999-10-29 Nick Clifton <nickc@cygnus.com>
457 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
458 (d30v_format_tab): Define the SHORT_AR format.
460 1999-10-28 Nick Clifton <nickc@cygnus.com>
462 * mcore-dis.c: Remove spurious code introduced in previous delta.
464 1999-10-27 Scott Bambrough <scottb@netwinder.org>
466 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
468 1999-10-18 Michael Meissner <meissner@cygnus.com>
470 * alpha-opc.c (alpha_operands): Fill in missing initializer.
471 (alpha_num_operands): Convert to unsigned.
472 (alpha_num_opcodes): Ditto.
473 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
478 (extract_bdisp): Ditto.
479 (extract_jhint): Ditto.
480 (extract_ev6hwjhint): Ditto.
482 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
484 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
487 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
489 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
491 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
493 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
494 rac/rachi instructions.
495 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
498 1999-10-04 Doug Evans <devans@casey.cygnus.com>
500 * fr30-asm.c,fr30-desc.h: Rebuild.
501 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
502 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
504 1999-09-29 Nick Clifton <nickc@cygnus.com>
506 * sh-opc.h: Fix bit patterns for several load and store
509 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
511 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
512 cleaner code using completer prefixes. Add 'Y'.
514 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
516 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
518 * hppa-dis.c (extract_22): New function.
520 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
522 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
524 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
526 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
528 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
530 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
532 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
534 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
536 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
538 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
540 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
542 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
545 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
547 * hppa-dis.c: (print_insn_hppa): Add missing break after
550 * hppa-dis.c: Finish constifying various completers, register
553 1999-09-14 Michael Meissner <meissner@cygnus.com>
555 * configure.in (Canonicalization of target names): Remove adding
556 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
557 generates $ac_config_sub with a ${CONFIG_SHELL} already.
558 * configure: Regenerate.
560 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
562 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
564 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
566 1999-09-07 Nick Clifton <nickc@cygnus.com>
568 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
569 names for the mulu and muls patterns.
571 1999-09-04 Steve Chamberlain <sac@pobox.com>
573 * pj-opc.c: New file.
574 * pj-dis.c: New file.
575 * disassemble.c (disassembler): Handle bfd_arch_pj.
576 * configure.in: Handle bfd_pj_arch.
577 * Makefile.am: Rebuild dependencies.
578 (CFILES): Add pj-dis.c and pj-opc.c.
579 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
580 * configure, Makefile.in: Rebuild.
582 1999-09-04 H.J. Lu <hjl@gnu.org>
584 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
586 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
588 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
590 1999-08-04 Doug Evans <devans@casey.cygnus.com>
592 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
593 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
594 * m32r-opinst.c: Rebuild.
596 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
598 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
599 register args by 'f'.
601 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
603 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
604 extract_10U_store): New.
605 (print_insn_hppa): Add new completers.
607 * hppa-dis.c (signed_unsigned_names,mix_half_names,
608 saturation_names): New.
609 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
611 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
613 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
615 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
616 to decide to print a space.
618 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
620 * i386-dis.c: Add AMD athlon instruction support.
622 1999-08-10 Ian Lance Taylor <ian@zembu.com>
624 From Wally Iimura <iimura@microunity.com>:
625 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
626 overflow at end of address space.
627 (generic_print_address): Use sprintf_vma.
629 1999-08-08 Ian Lance Taylor <ian@zembu.com>
631 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
632 MKDEP. Rebuild dependencies.
633 * Makefile.in: Rebuild.
635 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
637 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
638 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
639 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
640 (print_insn_hppa): Add 64 bit condition completers.
642 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
644 * hppa-dis.c (print_insn_hppa): Change condition args to use
647 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
649 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
652 1999-07-21 Ian Lance Taylor <ian@zembu.com>
655 * configure.bat: Remove; obsolete.
657 1999-07-11 Ian Lance Taylor <ian@zembu.com>
659 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
660 (generic_strcat_address): Add cast to avoid warning.
661 * i386-dis.c: Initialize all structure fields to avoid warnings.
662 Add ATTRIBUTE_UNUSED as appropriate.
664 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
666 * sparc-dis.c (print_insn_sparc): Differentiate between
667 addition and oring when guessing symbol for comment.
669 1999-07-05 Nick Clifton <nickc@cygnus.com>
671 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
674 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
676 * i386-dis.c: Mention intel mode specials in macro char comment.
678 1999-06-21 Ian Lance Taylor <ian@zembu.com>
680 * alpha-dis.c: Don't include <stdlib.h>.
681 * arm-dis.c: Include "sysdep.h".
682 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
684 * Makefile.am: Rebuild dependencies.
685 * Makefile.in: Rebuild.
687 1999-06-16 Nick Clifton <nickc@cygnus.com>
689 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
692 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
694 * arm-dis.c (arm_regnames): Turn into a pointer to a register
696 (arm_regnames_standard): New variable: Array of ARM register
697 names according to ARM instruction set nomenclature.
698 (arm_regnames_apcs): New variable: Array of ARM register names
699 according to ARM Procedure Call Standard.
700 (arm_regnames_raw): New variable: Array of ARM register names
701 using just 'r' and the register number.
702 (arm_toggle_regnames): New function: Toggle the chosen register set
704 (parse_disassembler_options): New function: Parse any target
705 disassembler command line options.
706 (print_insn_big_arm): Call parse_disassembler_options if any
708 (print_insn_little_arm): Call parse_disassembler_options if any
711 1999-06-13 Ian Lance Taylor <ian@zembu.com>
713 * i386-dis.c (FWAIT_OPCODE): Define.
714 (used_prefixes): New static variable.
715 (fetch_data): Don't print an error message if we have already
716 fetched some bytes successfully.
717 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
718 (prefix_name): New static function.
719 (print_insn_i386): If setjmp fails, indicating a data error, but
720 we have managed to fetch some bytes, print the first one as a
721 prefix or a .byte pseudo-op. If fwait is followed by a non
722 floating point instruction, print the first prefix. Set
723 used_prefixes when prefixes are used. If any prefixes were not
724 used after disassembling the instruction, print the first prefix
725 instead of printing the instruction.
726 (putop): Set used_prefixes when prefixes are used.
727 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
728 (OP_DIR, OP_SIMD_Suffix): Likewise.
730 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
732 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
733 Support signx %reg, clruw %reg.
735 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
737 * sparc-opc.c: Add aliases Solaris as supports.
739 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
741 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
742 * Makefile.in: Regenerated.
744 1999-06-03 Philip Blundell <philb@gnu.org>
746 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
747 when target is PC-relative.
749 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
751 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
754 * m68k-dis.c (fetch_arg): Add places `n', `o'.
756 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
757 Add mcf5206e to appropriate instructions.
758 Add alias for MAC, MSAC.
760 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
763 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
764 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
766 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
768 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
770 * i386-dis.c (Ed): Define.
771 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
773 (OP_rm): Rename to OP_Rd.
776 (putop): Add const to template and p.
777 (print_insn_x86): Delete.
778 (print_insn_i386): Merge old function print_insn_x86. Add const
780 (struct dis386): Add const to name.
781 (dis386_att, dis386_intel): Add const.
782 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
783 (names32, names16, names8, names_seg, index16): Add const.
784 (grps, prefix_user_table, float_reg): Add const.
785 (float_mem_att, float_mem_intel): Add const.
786 (oappend): Add const to s.
787 (OP_REG): Add const to s.
788 (ptr_reg): Add const to s.
789 (dofloat): Add const to dp.
790 (OP_C): Don't skip modrm, it's now done in OP_Rd.
793 (OP_Rd): Check for valid mod. Call Op_E to print.
794 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
795 (OP_MS): Check for valid mod. Call Op_EM to print.
796 (OP_3DNowSuffix): Set obufp and use oappend rather than
797 strcat. Call BadOp() for errors.
798 (OP_SIMD_Suffix): Likewise.
799 (BadOp): New function.
801 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
803 * i386-dis.c (dis386_intel): Remove macro chars, except for
804 jEcxz. Change cWtR and cRtd to cW and cR.
805 (dis386_twobyte_intel): Remove macro chars here too.
806 (putop): Handle R and W macros for intel mode.
808 * i386-dis.c (SIMD_Fixup): New function.
809 (dis386_twobyte_att): Use it on movlps and movhps, and change
810 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
811 (dis386_twobyte_intel): Same here.
813 * i386-dis.c (Av): Remove.
817 (OP_SIMD_Suffix): New function.
818 (OP_DIR): Remove dead code.
819 (eAX_reg..eDI_reg): Renumber.
820 (onebyte_has_modrm): Table numbering comments.
821 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
822 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
823 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
824 and handle SIMD cmp insns in OP_SIMD_Suffix.
825 (info->bytes_per_line): Bump from 5 to 6.
827 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
828 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
830 PIII SIMD support from Doug Ledford <dledford@redhat.com>
831 * i386-dis.c (XM, EX, None): Define.
832 (OP_XMM, OP_EX, OP_None): New functions.
833 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
834 (GRP14): Rename to GRPAMD.
835 (GRP*): Add USE_GROUPS flag.
837 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
838 (twobyte_has_modrm): Add SIMD entries.
839 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
840 (grps): Add SIMD insns.
841 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
842 oappend repz if uses_f3_prefix. Add code to handle new groups for
845 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
846 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
847 operand from Av to Jv.
849 1999-05-07 Nick Clifton <nickc@cygnus.com>
851 * mcore-dis.c (print_insn_mcore): Use .short to display
852 unidentified instructions, not .word.
854 1999-04-26 Tom Tromey <tromey@cygnus.com>
856 * aclocal.m4, configure: Updated for new version of libtool.
858 1999-04-14 Doug Evans <devans@casey.cygnus.com>
860 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
861 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
863 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
865 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
868 1999-04-10 Doug Evans <devans@casey.cygnus.com>
870 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
871 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
873 1999-04-06 Ian Lance Taylor <ian@zembu.com>
875 * opintl.h (LC_MESSAGES): Never define.
877 1999-04-04 Ian Lance Taylor <ian@zembu.com>
879 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
880 (separator_char, scale_char): Likewise.
881 (print_insn_x86): Likewise.
882 (print_insn_i386): Likewise. Add declaration.
884 1999-03-26 Doug Evans <devans@casey.cygnus.com>
886 * fr30-dis.c: Rebuild.
887 * m32r-dis.c: Rebuild.
889 1999-03-23 Ian Lance Taylor <ian@zembu.com>
891 * m68k-opc.c: Change compare instructions to use "@s" rather than
892 ";s" when used with an immediate operand.
894 1999-03-22 Doug Evans <devans@casey.cygnus.com>
896 * cgen-opc.c (cgen_set_cpu): Delete.
897 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
898 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
900 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
902 * po/opcodes.pot: Rebuild.
904 1999-03-16 Martin Hunt <hunt@cygnus.com>
906 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
908 1999-03-11 Doug Evans <devans@casey.cygnus.com>
910 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
911 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
912 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
913 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
914 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
915 * m32r-opinst.c: Rebuild.
917 1999-02-25 Doug Evans <devans@casey.cygnus.com>
919 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
920 (cgen_hw_lookup_by_num): Rewrite.
921 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
922 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
923 * m32r-opinst.c: Rebuild.
925 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
927 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
928 (insert_jhint): Fix insertion mask.
929 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
931 1999-02-10 Doug Evans <devans@casey.cygnus.com>
933 * Makefile.in: Rebuild.
935 1999-02-09 Doug Evans <devans@casey.cygnus.com>
937 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
938 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
939 * Makefile.am: Remove references to them.
940 (HFILES): Add fr30-desc.h,m32r-desc.h.
941 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
943 (ALL_MACHINES): Update.
944 * configure.in: Redo handling of cgen_files.
945 (bfd_i960_arch): Delete i960c-*.lo files.
946 * configure: Regenerate.
947 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
948 (hash_insn_array): Rewrite.
949 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
950 (hash_insn_array): Rewrite.
951 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
952 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
953 (cgen_lookup_get_insn_operands): Ditto.
954 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
955 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
956 * po/POTFILES.in: Rebuild.
957 * po/opcodes.pot: Rebuild.
959 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
961 * Makefile.am: Rebuild dependencies.
962 (HFILES): Add fr30-opc.h.
963 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
964 * Makefile.in: Rebuild.
966 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
967 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
969 * acconfig.h: Remove.
970 * configure: Rebuild with current autoconf/automake.
971 * aclocal.m4: Likewise.
972 * config.in: Likewise.
973 * Makefile.in: Likewise.
975 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
977 * m68k-opc.c: Correct move (not movew) to status word on 5200.
979 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
981 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
982 * i386-dis.c (x_mode): Define.
986 (dis386_twobyte): Remove.
987 (dis386_twobyte_att): New.
988 (dis386_twobyte_intel): New.
989 (print_insn_x86): Use new arrays.
991 (float_mem_intel): New.
992 (float_mem_att): New.
993 (dofloat): Use new float_mem arrays.
994 (print_insn_i386_att): New.
995 (print_insn_i386_intel): New.
996 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
997 (putop): Handle intel syntax.
998 (OP_indirE): Handle intel syntax.
999 (OP_E): Handle intel syntax.
1000 (OP_I): Handle intel syntax.
1001 (OP_sI): Handle intel syntax.
1002 (OP_OFF): Handle intel syntax.
1006 1999-01-27 Doug Evans <devans@casey.cygnus.com>
1008 * fr30-opc.h,fr30-opc.c: Rebuild.
1009 * i960c-opc.h,i960c-opc.c: Rebuild.
1010 * m32r-opc.c: Rebuild.
1012 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
1014 * hppa-dis.c: revert HP merge changes until HP gives us
1017 1999-01-19 Nick Clifton <nickc@cygnus.com>
1019 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
1020 offsets as well as symbloic address.
1022 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
1024 * hppa-dis.c: fix comments and some indentation.
1026 1999-01-12 Doug Evans <devans@casey.cygnus.com>
1028 * fr30-opc.c,i960c-opc.c: Regenerate.
1030 1999-01-11 Doug Evans <devans@casey.cygnus.com>
1032 * fr30-opc.c: Regenerate.
1034 1999-01-06 Doug Evans <devans@casey.cygnus.com>
1036 * m32r-dis.c: Regenerate.
1038 1999-01-05 Doug Evans <devans@casey.cygnus.com>
1040 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
1041 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
1042 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1044 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1046 * configure.in: Require autoconf 2.12.1 or higher.
1048 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
1050 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
1052 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
1054 * fr30-opc.c: Regenerated.
1056 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
1058 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
1060 1998-12-15 Dave Brolley <brolley@cygnus.com>
1062 * fr30-opc.c,fr30-opc.h: Regenerated.
1064 1998-12-14 Dave Brolley <brolley@cygnus.com>
1066 * fr30-opc.c,fr30-opc.h: Regenerated.
1068 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
1070 * fr30-opc.c,fr30-opc.h: Regenerated.
1072 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
1074 * m32r-opc.c: Regenerate.
1076 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
1078 * dis-buf.c (generic_strcat_address): reformat to GNU coding
1079 conventions. change sprintf call to an sprintf_vma call.
1081 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
1083 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1085 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
1087 The following changes were made by
1088 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
1089 David Taylor <taylor@texas.cygnus.com>, and
1090 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
1091 merge in changes by HP; HP did not create ChangeLog entries.
1093 * dis-buf.c (generic_strcat_address): new function.
1095 * hppa-dis.c: Changes to improve hppa disassembly.
1096 Changed formatting in : reg_names, fp_reg_names,control_reg,
1097 New variables : sign_extension_names, deposit_names, conversion_names
1098 float_test_names, compare_cond_names_double, add_cond_names_double,
1099 logical_cond_names_double, unit_cond_names_double,
1100 branch_push_pop_names, saturation_names, shift_names, mix_names,
1101 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
1102 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
1103 (fput_const): renamed as fput_hex_const
1105 - use the macros fputs_filtered and
1106 fput_decimal_const whenever possible; calls to sign_extend require
1107 2 params -- add a missing second param of 0.
1108 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
1109 architecture version number of current machine. HP folks are
1110 trying to handle situation where the target program was compiled
1111 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
1113 - added new cases : 'g', 'B', 'm'
1114 - added cases specifically for PA 2.0
1115 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
1116 - calls to fput_const become calls to fput_hex_const
1118 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
1120 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
1121 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
1122 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
1123 * Makefile.in: Rebuilt.
1124 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
1126 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
1127 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
1129 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
1131 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1133 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
1135 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
1137 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
1138 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
1140 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
1142 * fr30-opc.c: Regenerate.
1144 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
1146 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1148 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
1150 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1152 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
1154 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
1156 1998-11-30 Doug Evans <devans@casey.cygnus.com>
1158 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
1159 CGEN_INSN_BASE_VALUE.
1160 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1161 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
1163 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
1165 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
1167 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
1169 * fr30-asm.c,fr30-dis.c: Regenerated.
1171 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
1173 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1175 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
1177 * fr30-opc.c: Regenerated.
1179 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
1181 * fr30-opc.c: Regenerated.
1182 * fr30-opc.h: Regenerated.
1183 * fr30-dis.c: Regenerated.
1184 * fr30-asm.c: Regenerated.
1186 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
1188 * mips-opc.c (sync.p,sync.l): Swap insn values.
1190 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
1192 * fr30-opc.c: Regenerate.
1194 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
1196 * fr30-opc.c: Regenerated.
1197 * fr30-opc.h: Regenerated.
1199 1998-11-18 Doug Evans <devans@casey.cygnus.com>
1201 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
1202 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
1204 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
1206 * fr30-opc.c: Regenerated.
1208 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
1210 * fr30-opc.c: Regenerated.
1211 * fr30-opc.h: Regenerated.
1212 * fr30-dis.c: Regenerated.
1213 * fr30-asm.c: Regenerated.
1215 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
1217 * po/opcodes.pot: Regenerated.
1218 * fr30-opc.c: Regenerated.
1219 * fr30-opc.h: Regenerated.
1220 * fr30-dis.c: Regenerated.
1221 * fr30-asm.c: Regenerated.
1223 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
1225 * disassemble.c (disassembler): Add support for FR30 target.
1227 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
1229 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
1230 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
1232 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
1234 * po/opcodes.pot: Regenerate.
1235 * po/POTFILES.in: Regenerate.
1236 * fr30-opc.c: Regenerate.
1237 * fr30-opc.h: Regenerate.
1239 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
1241 * m32r-asm.c: Regenerate.
1243 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
1245 * configure.in: Added case for bfd_fr30_arch.
1246 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
1247 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
1248 (CLEANFILES): Added stamp-fr30.
1250 * fr30-asm.c: New file.
1251 * fr30-dis.c: New file.
1252 * fr30-opc.c: New file.
1253 * fr30-opc.h: New file.
1254 * po/POTFILES.in: Regenerated
1255 * po/opcodes.pot: Regenerated
1257 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
1259 * configure.in: detect cygwin* instead of cygwin32*
1260 * configure: regenerate
1262 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
1264 * mips-opc.c (IS_M): Added.
1266 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
1268 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1270 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
1272 * m32r-opc.h,m32r-opc.c: Regenerate.
1274 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1276 * i386-dis.c (OP_3DNowSuffix): New static function.
1279 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
1280 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
1281 (insn_codep): New static variable.
1282 (print_insn_x86): Init insn_codep after prefixes.
1283 (grps): Add GRP14 entries for prefetch, prefetchw.
1286 From Jeff B Epler <jepler@usgs.gov>
1287 * i386-dis.c (Suffix3DNow): New table.
1289 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
1291 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1293 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
1295 * d10v-dis.c (print_operand): If num is nonzero, then
1296 add OPERAND_ACC1, not OPERAND_ACC0.
1298 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
1300 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1303 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
1305 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1308 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1310 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1312 1998-09-09 Michael Meissner <meissner@cygnus.com>
1314 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1317 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1319 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1321 (print_insn_little_arm): Detect Thumb symbols in elf object
1324 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1326 * alpha-dis.c (print_insn_alpha): Use the machine type to
1327 decide which PALcode set to include.
1329 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1331 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1333 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1335 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1336 MSUB and MSUBS instructions.
1338 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1340 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1341 operand name macros.
1343 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1345 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1346 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1347 +, -, and d for ColdFire.
1349 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1350 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1351 (extract_mbe): Likewise.
1353 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1355 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1357 * m10300-opc.c: First cut at UDF instructions.
1359 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1361 * m32r-opc.c: Regenerate (remove semantic descriptions).
1363 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1365 * arm-dis.c (print_insn_big_arm): Fix indentation.
1366 (print_insn_little_arm): Likewise.
1368 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1370 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1372 (print_insn_little_arm): Likewise.
1374 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1376 Move all global state data into opcode table struct, and treat
1377 opcode table as something that is "opened/closed".
1378 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1379 (cgen_asm_init): Delete.
1380 (cgen_set_parse_operand_fn): New function.
1381 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1382 (cgen_dis_init): Delete.
1383 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1384 (cgen_current_{opcode_table_mach,endian}): Delete.
1385 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1387 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1389 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1392 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1394 * m10300-opc.c: Add entries for "no_match_operands" field in
1397 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1399 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1401 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1403 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1405 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1407 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1409 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1411 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1412 will be masked later.
1414 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1416 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1418 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1420 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1422 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1424 * m10300-dis.c: Only recognize instructions from the currently
1426 * m10300-opc.c: Add field indicating the particular variant of
1427 the mn10300 each instruction is available on.
1429 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1431 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1432 * Makefile.am: Rebuild dependencies.
1433 (CFILES): Add vax-dis.c.
1434 (ALL_MACHINES): Add vax-dis.lo.
1435 * aclocal.m4: Rebuild with current libtool.
1436 * configure, Makefile.in: Rebuild.
1438 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1440 * vax-dis.c: New file, from work by Pauline Middelink
1441 <middelin@polyware.iaf.nl>.
1442 * disassemble.c (ARCH_vax): Define if ARCH_all.
1443 (disassembler): Add case for ARCH_vax.
1444 * makefile.vms: Support compilation on vms/vax.
1446 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1448 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1449 related to sign extension and the size of ints.
1451 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1453 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1454 instructions. Support (sp) addressing mode by expanding it into
1457 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1459 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1461 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1463 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1465 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1467 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1470 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1472 * mips-dis.c (print_insn_little_mips): Previously, instruction
1473 printing references the symbol table to determine whether the
1474 instruction resides in a block regular instructions or mips16
1475 instructions. However, when the disassembler gets used in other
1476 environments where the symbol table is not present, we no longer
1477 rely in the symbol table, rather, use the low bit of the
1478 instructions address to guess. There should be no change for usage
1479 of the disassembler in host based programs, gdb, objdump.
1480 (print_insn_big_mips): ditto.
1481 (print_insn_mips): ditto
1483 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1485 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1487 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1489 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1491 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1493 * i386-dis.c (index16): Add '%' to register names. Use ','
1496 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1498 * i386-dis.c: Don't print opcode suffix when we can figure out the
1499 size (and gas can!) by register operands, or from the default
1501 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1503 (dis386, dis386_twobyte, grps): Use new suffix macros.
1504 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1505 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1506 order of cmps operands to agree with Intel docs. Correct operand
1507 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1508 agree with Intel docs.
1509 (print_insn_x86): Print orphan fwait before other prefixes.
1510 Return correct byte count for orphan fwait with prefixes. Don't
1511 print `bound' operands in reverse order.
1512 (ckprefix): Stop accumulating prefixes if we get fwait.
1513 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1515 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1517 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1518 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1520 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1522 Fix problems when bfd_vma is wider than long.
1523 * i386-dis.c: Make op_address and start_pc unsigned.
1524 (set_op): Make parameter unsigned.
1525 (print_insn_x86): Cast to bfd_vma when passing a value to
1527 * ns32k-dis.c (CORE_ADDR): Don't define.
1528 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1529 bfd_scan_vma to read back address.
1530 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1532 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1533 (NEXTULONG): New definition.
1534 (print_insn_m68k): Avoid overflow when computing third argument of
1536 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1537 Use disp instead of val to store offset values.
1538 (print_indexed): Use base_disp instead of word to store base
1539 displacement, to avoid overflow.
1540 * m10300-dis.c (disassemble): Cast value to long when computing
1541 pc-relative address, to get correct sign extension.
1543 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1545 * m32r-opc.c: Regenerate.
1547 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1549 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1550 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1552 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1554 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1556 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1558 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1560 (OP_DSreg): Rename from OP_DSSI.
1561 (OP_ESreg): Rename from OP_ESDI.
1562 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1564 (append_seg): Rename from append_prefix.
1565 (ptr_reg): New function.
1566 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1568 (PREFIX_ADDR): Rename from PREFIX_ADR.
1569 (float_reg): Add non-broken opcodes for people who don't want
1572 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1574 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1577 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1579 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1581 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1583 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1584 0; produce error message for shifts of size 32 (or 64 for 64-bit
1585 shifts), because the hardware doesn't support them.
1587 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1589 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1590 LONG_2, LONG_2b formats to use this new operand.
1592 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1594 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1596 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1598 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1599 endian data support.
1601 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1603 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1604 and SHORT_B3b formats to use Rb instead of Ra.
1606 Add FLAG_MUL16 to MUL2XH opcode.
1608 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1609 to existing 1.1.1 parallelisation prohibition procedure.
1611 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1613 * m32r-asm.c,m32r-dis.c: Regenerate.
1615 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1617 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1618 with a shift count of 0.
1620 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1622 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1623 (cgen_hw_lookup_by_num): New function.
1625 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1627 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1629 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1631 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1632 as big-endian on SPARClite.
1634 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1636 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1638 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1640 * po/Make-in (install-info): New target.
1642 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1644 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1645 * configure: Rebuild.
1647 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1649 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1650 variety of ISA2 instructions to set bottom ten bits of trap code.
1652 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1654 * Makefile.am (config.status): Add explicit target so that
1655 config.status depends upon bfd/configure.in.
1656 * Makefile.in: Rebuild.
1658 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1660 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1661 instructions to set bottom ten bits of break code.
1662 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1663 for above optional argument.
1665 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1667 * makefile.vms: Run dec c with /nodebug.
1669 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1671 * Makefile.in: Rebuilt.
1672 * Makefile.am: Regenerated dependencies with mkdep.
1674 * opintl.h (_): Define as dgettext.
1676 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1678 * cgen-asm.c: Internationalised.
1679 * m32r-asm.c: Internationalised.
1680 * m32r-dis.c: Internationalised.
1681 * m32r-opc.c: Internationalised.
1683 * aclocal.m4: Regenerated.
1684 * configure: Regenerated.
1685 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1686 * Makefile.in: Rebuild.
1687 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1688 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1690 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1692 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1694 * aclocal.m4, configure: Rebuild with current tools.
1696 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1698 * opintl.h: New file - contains internationalisation macros used
1699 by source files in this directory.
1700 * po/: New subdirectory - contains internationalisation files.
1701 * po/Make-in: New file - Makefile constructor.
1702 * po/POTFILES.in: New file - list of files in opcodes directory
1703 that should be scan for internationalisation macros.
1704 * po/opcodes.pot: New file - list of internationisation strings
1705 found in files mentioned in po/POTFILES.in.
1706 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1707 entry. Add intl directory to include paths.
1708 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1709 HAVE_STRCPY, HAVE_LC_MESSAGES
1710 * configure.in: Add rule to build Makefile in po subdirectory.
1711 * Makefile.in: Rebuilt.
1712 * aclocal.m4: Rebuilt.
1713 * config.in: Rebuilt.
1714 * configure: Rebuilt.
1715 * alpha-opc.c: Internationalised.
1716 * arc-dis.c: Internationalised.
1717 * arc-opc.c: Internationalised.
1718 * arm-dis.c: Internationalised.
1719 * cgen-asm.c: Internationalised.
1720 * d30v-dis.c: Internationalised.
1721 * dis-buf.c: Internationalised.
1722 * h8300-dis.c: Internationalised.
1723 * h8500-dis.c: Internationalised.
1724 * i386-dis.c: Internationalised.
1725 * m10200-dis.c: Internationalised.
1726 * m10300-dis.c: Internationalised.
1727 * m68k-dis.c: Internationalised.
1728 * m88k-dis.c: Internationalised.
1729 * mips-dis.c: Internationalised.
1730 * ns32k-dis.c: Internationalised.
1731 * opintl.h: Internationalised.
1732 * ppc-opc.c: Internationalised.
1733 * sparc-dis.c: Internationalised.
1734 * v850-dis.c: Internationalised.
1735 * v850-opc.c: Internationalised.
1737 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1739 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1740 (asm_hash_table_entries): New variable.
1741 (cgen_asm_init): Free asm_hash_table_entries.
1742 (hash_insn_array,hash_insn_list): New functions.
1743 (build_asm_hash_table): Use them. Hash macro insns as well.
1744 (cgen_asm_lookup_insn): Update.
1745 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1746 (dis_hash_table_entries): New variable.
1747 (cgen_dis_init): Free dis_hash_table_entries.
1748 (hash_insn_array,hash_insn_list): New functions.
1749 (build_dis_hash_table): Use them. Hash macro insns as well.
1750 (cgen_dis_lookup_insn): Update.
1751 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1752 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1753 (cgen_macro_insn_count): New function.
1754 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1756 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1758 * i386-dis.c (OP_DSSI): Print segment override.
1760 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1762 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1765 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1767 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1768 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1769 * configure.in: Define and substitute WIN32LDFLAGS and
1771 * aclocal.m4: Rebuild with new libtool.
1772 * configure, Makefile.in: Rebuild.
1774 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1776 * m32r-opc.c: Regenerate.
1778 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1780 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1781 before trying to copy it.
1782 * Makefile.in: Rebuild.
1784 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1786 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1788 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1790 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1791 from an arbitrary valid buffer instead of fetching them on demand
1793 (invalid_float): use bit_extract_simple() instead of bit_extract().
1795 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1797 From H.J. Lu <hjl@gnu.org>:
1798 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1801 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1803 * Branched binutils 2.9.
1805 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1807 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1808 disassembling last 4 bytes of a section.
1810 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1812 Fix some gcc -Wall warnings:
1813 * arc-dis.c (print_insn): Add casts to avoid warnings.
1814 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1815 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1816 * m10200-dis.c (disassemble): Likewise.
1817 * m10300-dis.c (disassemble): Likewise.
1818 * ns32k-dis.c (print_insn_ns32k): Likewise.
1819 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1820 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1821 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1822 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1823 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1824 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1825 * tic80-dis.c (print_one_instruction): Likewise.
1826 * w65-dis.c (print_operand): Likewise.
1827 * z8k-dis.c (fetch_data): Likewise.
1828 * a29k-dis.c: Add return type for find_byte_func_type.
1829 * arc-opc.c: Include <stdio.h>. Remove declarations of
1830 insert_multshift and extract_multshift.
1831 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1833 (extract_value): Fully parenthesize expression.
1834 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1835 * h8500-opc.h (h8500_table): Fully bracket initializer.
1836 * w65-opc.h (optable): Likewise.
1837 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1838 * i386-dis.c (OP_E): Initialize local variables.
1839 * m10200-dis.c (print_insn_mn10200): Likewise.
1840 * mips-dis.c (print_insn_mips16): Likewise.
1841 * sh-dis.c (print_insn_shx): Likewise.
1842 * v850-dis.c (print_insn_v850): Likewise.
1843 * ns32k-dis.c (print_insn_arg): Declare.
1844 (get_displacement, invalid_float): Declare.
1845 (list_search, sign_extend, flip_bytes): Declare return type.
1846 (get_displacement): Likewise.
1847 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1849 (print_insn_ns32k): Make i unsigned.
1850 (invalid_float): Make static. Declare type of val.
1851 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1852 on each for iteration.
1853 * tic30-dis.c (get_indirect_operand): Likewise.
1854 * z8k-dis.c (print_insn_z8001): Declare return type.
1855 (print_insn_z8002): Likewise.
1856 (unparse_instr): Fix sprintf format strings.
1858 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1860 * mips-opc.c: Add "sync.l" and "sync.p".
1862 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1864 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1865 default m68k variant to recognize.
1867 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1868 (ctrl, cobr, mem, ea): Likewise.
1869 (print_addr): Likewise. Remove cast.
1870 (ea): Cast argument of print_addr to bfd_vma.
1872 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1874 (cgen_parse_unsigned_integer): Likewise.
1875 (cgen_parse_address): Likewise.
1877 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1879 * i960-dis.c (ctrl): Add full braces to structure initialization.
1880 (cobr, mem, reg): Likewise.
1881 (ea): Correct parenthesization in expression.
1883 * cgen-asm.c: Include <ctype.h>.
1884 (build_asm_hash_table): Remove unused local variable i.
1885 (cgen_parse_keyword): Add casts to avoid warnings.
1887 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1888 symbol. Fix indentation.
1889 (print_insn_little_arm): Likewise.
1891 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1893 * configure.in: Use AM_DISABLE_SHARED.
1894 * aclocal.m4, configure: Rebuild with libtool 1.2.
1896 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1898 These patches are courtesy of Jonathan Walton and Tony Thompson
1899 (athompso@cambridge.arm.com).
1901 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1904 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1905 both the offset and the label closest to the destination.
1907 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1909 * m32r-opc.h: Regenerate.
1911 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1913 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1915 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1917 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1918 assume that info->symbols is non-empty.
1920 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1922 * alpha-opc.c (cvtqs) There is no such thing.
1923 (cvttq): Missing most of the /*d variants.
1925 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1927 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1928 delayed branches or jumps.
1930 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1932 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1934 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1935 * tic30-dis.c (print_branch): Likewise.
1937 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1939 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1940 saved_symbol code as it is no longer needed.
1942 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1944 * cgen-asm.c: Include symcat.h.
1945 * cgen-dis.c,cgen-opc.c: Ditto.
1946 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1948 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1950 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1952 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1954 * m32r-opc.[ch]: Regenerate.
1956 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1958 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1959 arguments. Don't perform validation here.
1960 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1962 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1964 * m32r-opc.c: Regenerate.
1966 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1968 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1969 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1971 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1973 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1975 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1977 * configure.in: Get the version number from BFD.
1978 * configure: Rebuild.
1980 From H.J. Lu <hjl@gnu.org>:
1981 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1982 * Makefile.in: Rebuild.
1984 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1986 * m32r-opc.c: Regenerate.
1987 * m32r-opc.h: Regenerate.
1989 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1991 * m32r-opc.c: Regenerate.
1993 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1995 Fix rac to accept only a0:
1996 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1997 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1998 Introduce OPERAND_GPR.
1999 * d10v-dis.c (print_operand): Likewise.
2001 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
2003 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
2004 (cgen_hw_lookup): Make result const.
2005 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2007 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
2009 * configure, aclocal.m4: Rebuild with new libtool.
2011 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
2013 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
2014 instructions use a PC relative branch, not absolute.
2016 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
2018 * configure.in: Set libtool_enable_shared rather than
2019 libtool_shared. Remove diversion hack.
2020 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
2022 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
2024 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
2025 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2027 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
2029 * tic30-dis.c: New file.
2030 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
2031 * configure.in: Handle bfd_tic30_arch.
2032 * Makefile.am: Rebuild dependencies.
2033 (CFILES): Add tic30-dis.c
2034 (ALL_MACHINES): Add tic30-dis.lo.
2035 * configure, Makefile.in: Rebuild.
2037 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
2039 * m32r-opc.h (HAVE_CPU_M32R): Define.
2041 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
2043 * v850-opc.c (insertion routines): If both alignment and size is
2044 wrong then report this.
2046 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
2048 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
2049 Only recognize instructions for the current target_processor.
2051 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
2053 * d10v-dis.c (PC_MASK): Correct value.
2054 (print_operand): If there's a reloc, don't calculate the
2055 address because they could be in different sections.
2057 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
2059 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
2060 instruction after the 4650's "mul" instruction; nobody's using the
2061 4010 these days. If object files someday indicate which processor
2062 variant they're intended for, we can do a better job at this.
2064 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
2066 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
2067 table provided entry size. Use CGEN_INSN_MNEMONIC.
2068 (cgen_parse_keyword): Rewrite.
2069 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
2070 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
2071 * cgen-opc.c: Clean up pass over `struct foo' usage.
2072 (cgen_keyword_lookup_value): Handle "" entry.
2073 (cgen_keyword_add): Likewise.
2075 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
2077 * mips-opc.c: Add FP_D to s.d instruction flags.
2079 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2081 * m68k-opc.c (halt, pulse): Enable them on the 68060.
2083 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
2085 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
2086 PC relative offset forms before the 15 bit forms. An assembler command
2087 line option now chooses the default.
2089 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
2091 * d30v-opc.c (d30v_opcode_table): Set new flags bits
2092 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
2094 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
2096 * configure: Only build libopcodes shared if --enable-shared's value
2097 was `yes', or was set to `*opcodes*'.
2098 * aclocal.m4: Likewise.
2099 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
2100 original source of this bit of code. It's not clear what the best fix
2103 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
2105 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
2106 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
2107 offset forms before the 15 bit forms, to default to the long forms.
2109 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
2111 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
2113 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
2115 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
2116 symbol if none is present.
2117 (print_insn_big_arm): Prevent examination of stored symbol if
2120 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
2122 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
2124 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
2126 * disassemble.c: Remove disasm_symaddr() function.
2128 * arm-dis.c: Use info->symbol instead of info->flags to determine
2129 if disassmbly should be in Thumb or Arm mode.
2131 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
2133 * arm-dis.c: Add support for disassembling Thumb opcodes.
2134 (print_insn_thumb): New function.
2136 * disassemble.c (disasm_symaddr): New function.
2138 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
2139 (thumb_opcodes): Table of Thumb opcodes.
2141 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2143 * m68k-opc.c (btst): Change Dd@s to Dd;b.
2145 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
2146 and 'v' as operand types.
2148 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
2150 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
2151 <olivier.carmona@di.epfl.ch>.
2152 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
2153 which has a two word opcode with a one word argument.
2155 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
2157 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
2158 unsigned, not signed.
2159 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
2161 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2163 * d10v-dis.c (print_operand):
2164 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
2166 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2168 * d10v-opc.c (OPERAND_FLAG): Split into:
2169 (OPERAND_FFLAG, OPERAND_CFLAG) .
2173 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
2175 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
2176 field for all INSN_MACRO's.
2177 * mips16-opc.c: same
2179 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
2181 * mips-opc.c (sync,cache): These are 3900 insns.
2183 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2185 sh-opc.h (sh_table): Remove ftst/nan.
2187 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
2189 * mips-opc.c (ffc, ffs): Fix mask.
2191 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2193 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2196 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2198 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2199 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2201 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2203 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2204 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2206 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2208 * v850-dis.c (disassemble): Replace // with /* ... */
2210 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2212 * sparc-opc.c: Add wr & rd for v9a asr's.
2213 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2214 (v9a_asr_reg_names): New variable.
2215 Patch from David Miller <davem@vger.rutgers.edu>.
2217 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2219 * sparc-opc.c (v9notv9a): New insn type.
2220 (IMPDEP): Move to the end to not conflict with edge8 et al.
2221 Patch from David Miller <davem@vger.rutgers.edu>.
2223 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2225 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2227 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2229 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2231 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2233 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2234 of disassemble_info structure to determine if an overlay address
2235 has a matching symbol in low memory.
2237 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2238 new symbol_at_address_func field in disassemble_info structure.
2240 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2242 * v850-opc.c (extract_d22): Use signed arithmatic.
2244 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2246 * mips-opc.c: Three op mult is not an ISA insn.
2248 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2250 * mips-opc.c: Fix formatting.
2252 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2254 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2255 than assuming that char is signed. Explicitly sign extend 16 bit
2256 values, rather than assuming that short is 16 bits.
2257 (OP_sI, OP_J, OP_DIR): Likewise.
2259 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2261 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2264 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2266 * v850-opc.c: Fix typo in comment.
2268 * v850-dis.c (disassemble): Add test of processor type when
2269 determining opcodes.
2271 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2273 * configure.in: Use a diversion to set enable_shared before the
2274 arguments are parsed.
2275 * configure: Rebuild.
2277 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2279 * m68k-opc.c (TBL1): Use ! rather than `.
2280 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2282 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2284 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2286 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2288 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2291 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2292 * aclocal.m4: Rebuild with new libtool.
2293 * configure: Rebuild.
2295 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2297 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2299 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2301 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2303 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2305 * v850-opc.c (v850_opcodes): Further rearrangements.
2307 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2309 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2311 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2313 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2316 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2318 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2320 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2322 * v850-opc.c: Initialise processors field of v850_opcode structure.
2324 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2326 Merge changes from Martin Hunt:
2328 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2330 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2331 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2332 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2334 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2336 * d30v-dis.c (print_insn): First operand of d*i (delayed
2337 branch) instructions is relative.
2339 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2340 (d30v_operand_table): Add IMM6S3 type.
2341 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2343 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2344 and cmp instructions.
2346 * d30v-opc.c: Correct entries for repeat*, and sat*.
2347 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2348 types. Correct several formats.
2350 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2352 * d30v-opc.c (pre_defined_registers): Change control registers.
2354 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2355 SHORT_C2. Manual was incorrect.
2357 * d30v-dis.c (lookup_opcode): Return value now indicates
2358 if an opcode has a short and a long form. Used for deciding
2359 to append a ".s" or ".l".
2360 (print_insn): Append a ".s" to an instruction if it is
2361 the short form and ".l" if it is a long form. Do not append
2362 anything if the instruction has only one possible size.
2364 * d30v-opc.c: Change mulx2h to require an even register.
2365 New form: SHORT_A2; a SHORT_A form that needs an even
2366 register as the first operand.
2368 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2369 instruction was not being disassembled if there were an odd
2370 number of instructions.
2372 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2374 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2376 * v850-dis.c (disassemble): Improved display of register lists.
2378 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2380 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2381 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2382 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2383 fandnot1s, fandnot2s.
2385 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2387 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2389 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2391 * cgen-asm.c (cgen_parse_address): New argument resultp.
2392 All callers updated.
2393 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2395 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2397 * mn10200-dis.c (disassemble): PC relative instructions are
2398 relative to the next instruction, not the current instruction.
2400 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2402 * v850-dis.c (disassemble): Only signed extend values that are not
2403 returned by extract functions.
2404 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2406 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2408 * v850-opc.c: Update comments. Remove use of
2409 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2411 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2413 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2415 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2417 * configure: Rebuilt with latest devo autoconf for NT support.
2419 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2421 * v850-dis.c (disassemble): Use curly brace syntax for register
2424 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2425 where r0 is being used as a destination register.
2427 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2429 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2431 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2433 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2435 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2437 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2438 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2441 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2443 * configure (cgen_files): Add support for v850e target.
2444 * configure.in (cgen_files): Add support for v850e target.
2446 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2448 * configure (cgen_files): Add support for v850ea target.
2449 * configure.in (cgen_files): Add support for v850ea target.
2451 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2453 * configure.in (bfd_arc_arch): Add.
2454 * configure: Rebuild.
2455 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2456 * Makefile.in: Rebuild.
2457 * arc-dis.c, arc-opc.c: New files.
2458 * disassemble.c (ARCH_all): Define ARCH_arc.
2459 (disassembler): Add ARC support.
2461 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2463 * v850-dis.c (disassemble): Add support for v850EA instructions.
2465 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2466 (v850_opcodes): Add v850EA instructions.
2468 * v850-dis.c (disassemble): Add support for v850E instructions.
2470 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2471 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2472 insert_spe, extract_spe): New Functions.
2473 (v850_opcodes): Add v850E instructions.
2475 * v850-opc.c: Reorganised and re-layed out to improve readability
2478 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2480 * configure: Rebuild with autoconf 2.12.1.
2482 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2484 * aclocal.m4, configure: Rebuild with new automake patches.
2486 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2488 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2489 * acinclude.m4: Just include acinclude.m4 from BFD.
2490 * aclocal.m4, configure: Rebuild.
2492 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2494 * Makefile.am: New file, based on old Makefile.in.
2495 * acconfig.h: New file.
2496 * acinclude.m4: New file.
2497 * stamp-h.in: New file.
2498 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2499 Removed shared library handling; now handled by libtool. Replace
2500 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2501 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2502 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2503 handling in AC_OUTPUT.
2504 * dep-in.sed: Change .o to .lo.
2505 * Makefile.in: Now built with automake.
2506 * aclocal.m4: Now built with aclocal.
2507 * config.in, configure: Rebuild.
2509 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2511 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2513 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2515 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2517 * sparc-dis.c (sorted_opcodes): New static local.
2518 (struct opcode_hash): `opcode' is pointer to const element.
2519 (build_hash): First arg is now table of sorted pointers.
2520 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2521 (compare_opcodes): Update.
2523 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2525 * cgen-opc.c: #include <ctype.h>.
2526 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2527 Handle case insensitive hashing.
2528 (hash_keyword_value): Change type of `value' to unsigned int.
2530 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2532 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2533 precision FP, mark it as such. Likewise for double precision
2534 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2537 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2539 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2541 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2542 nesting depth when all the macros are expanded.
2544 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2546 * sparc-opc.c: The fcmp v9a instructions take an integer register
2547 as a destination, not a floating point register. From Christian
2548 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2550 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2552 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2553 syntax. From Roman Hodek
2554 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2556 * i386-dis.c (twobyte_has_modrm): Fix pand.
2558 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2560 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2562 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2564 * arm-dis.c: Add prototypes for arm_decode_shift and
2567 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2569 * mips-opc.c: Add r3900 insns.
2571 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2573 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2574 print delay slot instructions on the same line. When using a PC
2575 relative load, add a comment with the value being loaded if it can
2578 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2580 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2581 to pushS/popS for segment regs and byte constant so that
2582 pushw/popw printed when in 16 bit data mode.
2584 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2585 print cbtw, cwtd in 16 bit data mode.
2586 * i386-dis.c (putop): extra case W to support above.
2588 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2589 address size prefix in 16 bit address mode.
2591 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2593 * sh-dis.c: Reindent. Rename local variable fprintf to
2596 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2598 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2600 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2602 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2604 * mips16-opc.c (mip16_opcodes): same.
2606 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2608 * m68k-opc.c (moveb): Change $d to %d.
2610 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2612 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2613 (twobyte_has_modrm): Likewise.
2615 (OP_MMX, OP_EM, OP_MS): New static functions.
2617 * i386-dis.c: Revert patch of April 4. The output now matches
2620 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2622 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2625 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2627 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2629 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2631 * Makefile.in (install): Depend upon installdirs.
2632 (installdirs): New target.
2634 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2636 From Thomas Graichen <graichen@rzpd.de>:
2637 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2638 * configure: Rebuild.
2640 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2642 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2643 Delete string{,s}.h support.
2645 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2647 * cgen-asm.c (cgen_parse_operand_fn): New global.
2648 (cgen_parse_{{,un}signed_integer,address}): Update call to
2649 cgen_parse_operand_fn.
2650 (cgen_init_parse_operand): New function.
2651 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2652 from cgen_asm_init_parse.
2653 (m32r_cgen_assemble_insn): New operand `errmsg'.
2654 Delete call to as_bad, return error message to caller.
2655 (m32r_cgen_asm_hash_keywords): #if 0 out.
2657 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2659 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2661 [case 'J']: Fix typo in register name.
2663 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2665 * configure.in: Substitute SHLIB_LIBS.
2666 * configure: Rebuild.
2667 * Makefile.in (SHLIB_LIBS): New variable.
2668 ($(SHLIB)): Use $(SHLIB_LIBS).
2670 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2672 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2674 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2676 * disassemble.c (disassembler): Handle m32r.
2678 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2680 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2681 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2682 * Makefile.in (CFILES): Add them.
2683 (ALL_MACHINES): Add them.
2684 (dependencies): Regenerate.
2685 * configure.in (cgen_files): New variable.
2686 (bfd_m32r_arch): Add entry.
2687 * configure: Regenerate.
2689 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2691 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2692 * configure: Rebuild.
2694 * Makefile.in: Rebuild dependencies.
2696 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2698 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2701 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2703 * Branched binutils 2.8.
2705 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2707 * m10200-dis.c: Rename from mn10200-dis.c.
2708 * m10200-opc.c: Rename from mn10200-opc.c.
2709 * m10300-dis.c: Rename from mn10300-dis.c
2710 * m10300-opc.c: Rename from mn10300-opc.c.
2711 * Makefile.in: Update accordingly.
2713 * mips16-opc.c: Add mul and dmul macros.
2715 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2717 * makefile.vms: Update CFLAGS, add clean target.
2719 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2721 * mips-opc.c: Add "wait". From Ralf Baechle
2722 <ralf@gnu.ai.mit.edu>.
2724 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2725 * configure, config.in: Rebuild.
2726 * sysdep.h: Include <stdlib.h> if it exists.
2727 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2729 * Makefile.in: Rebuild dependencies.
2731 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2733 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2734 Andrew Bray <andy@madhouse.demon.co.uk>.
2736 * mips-opc.c: Add cast when setting mips_opcodes.
2738 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2740 * v850-dis.c (disassemble): Fix sign extension problem.
2741 * v850-opc.c (extract_d*): Fix sign extension problems to make
2742 disassembly calculate branch offsets correctly.
2744 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2746 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2748 * mips-opc.c: Add dctr and dctw.
2750 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2752 * d30v-dis.c (print_insn): Change the way signed constants
2755 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2757 * Makefile.in (BFD_H): New variable.
2758 (HFILES): New variable.
2759 (CFILES): Add all C files.
2760 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2761 Delete old dependencies, and build new ones.
2762 * dep-in.sed: New file.
2764 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2766 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2768 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2770 * mn10200-opc.c: Change "trap" to "syscall".
2771 * mn10300-opc.c: Add new "syscall" instruction.
2773 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2775 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2776 mulul insns on the coldfire.
2778 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2780 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2781 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2782 (print_insn_little_arm): Likewise.
2784 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2786 Based on patches from H.J. Lu <hjl@lucon.org>:
2787 * i386-dis.c (fetch_data): Add prototype.
2788 * m68k-dis.c (fetch_data): Add prototype.
2789 (dummy_print_address): Add prototype. Make static.
2790 * ppc-opc.c (valid_bo): Add prototype.
2791 * sparc-dis.c (build_hash_table): Add prototype.
2792 (is_delayed_branch, compute_arch_mask): Add prototypes.
2793 (print_insn_sparc): Make several local variables const.
2794 (compare_opcodes): Change arguments to const PTR. Add prototype.
2795 * sparc-opc.c (arg): Change name field to be const.
2796 (lookup_name, lookup_value): Add prototypes. Change table and
2797 name parameters to be const.
2798 (sparc_encode_asi): Change name parameter to be const.
2799 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2800 (sparc_encode_sparclet_cpreg): Likewise.
2801 (sparc_decode_asi): Change return type to be const.
2802 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2803 (sparc_decode_sparclet_cpreg): Likewise.
2805 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2807 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2808 Solaris doesn't like the combined options, and the -f is
2810 (stamp-tshlink, install): Likewise.
2812 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2814 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2817 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2819 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2821 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2823 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2826 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2828 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2830 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2832 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2834 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2836 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2838 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2840 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2841 floatformat_to_double to make portable.
2842 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2845 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2847 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2848 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2850 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2852 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2853 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2855 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2857 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2858 (OFF_SL_BR_SCALED): ... to this, and added the flag
2859 TIC80_OPERAND_BASEREL to the flags word.
2860 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2863 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2865 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2866 Change mips_opcodes from const array to a pointer,
2867 and change bfd_mips_num_opcodes from const int to int,
2868 so that we can increase the size of the mips opcodes table
2871 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2873 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2874 store BITNUM values in the table in one's complement form
2875 to match behavior when assembler is given a raw numeric
2876 value for a BITNUM operand.
2877 * tic80-dis.c (print_operand_bitnum): Ditto.
2879 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2881 * d30v-opc.c: Removed references to FLAG_X.
2883 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2885 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2887 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2889 * Makefile.in: Added d30v object files.
2890 * configure: (bfd_d30v_arch) Rebuilt.
2891 * configure.in: (bfd_d30v_arch) Added new case.
2892 * d30v-dis.c: New file.
2893 * d30v-opc.c: New file.
2894 * disassemble.c (disassembler) Add entry for d30v.
2896 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2898 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2899 representations for the floating point BITNUM values.
2901 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2903 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2904 in the table in one's complement form, as they appear in the
2906 (tic80_symbol_to_value): Use macros to access predefined
2908 (tic80_value_to_symbol): Ditto.
2909 (tic80_next_predefined_symbol): New function.
2910 * tic80-dis.c (print_operand_bitnum): Remove code that did
2911 one's complement for BITNUM values.
2913 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2915 * makefile.vms: Remove 8 bit characters. Update to latest
2918 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2920 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2922 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2924 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2925 (IMM24_PCREL): Likewise.
2927 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2929 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2930 address for an extended PC relative instruction that is not a
2933 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2935 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2938 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2940 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2941 (tic80_opcodes): Sort entries so that long immediate forms
2942 come after short immediate forms, making it easier for
2943 assembler to select the right one for a given operand.
2945 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2947 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2949 (print_insn_mips16): Likewise.
2951 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2953 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2954 a symbol class that restricts translation to just that
2955 class (general register, condition code, etc).
2957 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2959 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2960 and REG_DEST_E for register operands that have to be
2961 an even numbered register. Add REG_FPA for operands that
2962 are one of the floating point accumulator registers.
2963 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2964 (tic80_opcodes): Change entries that need even numbered
2965 register operands to use the new operand table entries.
2966 Add "or" entries that are identical to "or.tt" entries.
2968 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2970 * mips16-opc.c: Add new cases of exit instruction for
2972 * mips-dis.c (print_mips16_insn_arg): Display floating point
2973 registers in operands of exit instruction. Print `$' before
2974 register names in operands of entry and exit instructions.
2976 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2978 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2979 pairs for all predefined symbols recognized by the assembler.
2980 Also used by the disassembling routines.
2981 (tic80_symbol_to_value): New function.
2982 (tic80_value_to_symbol): New function.
2983 * tic80-dis.c (print_operand_control_register,
2984 print_operand_condition_code, print_operand_bitnum):
2985 Remove private tables and use tic80_value_to_symbol function.
2987 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2989 * d10v-dis.c (print_operand): Change address printing
2990 to correctly handle PC wrapping. Fixes PR11490.
2992 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2994 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2997 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2999 * mips-dis.c (print_insn_mips16): Set insn_info information.
3000 (print_mips16_insn_arg): Likewise.
3002 * mips-dis.c (print_insn_mips16): Better handling of an extend
3003 opcode followed by an instruction which can not be extended.
3005 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
3007 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
3008 coldfire moveb instruction to not allow an address register as
3009 destination. Although the documentation does not indicate that
3010 this is invalid, experiments uncovered unexpected behavior.
3011 Added a comment explaining the situation. Thanks to Andreas
3012 Schwab for pointing this out to me.
3014 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
3016 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
3017 entries are presorted so that entries with the same mnemonic are
3018 adjacent to each other in the table. Sort the entries for each
3019 instruction so that this is true.
3021 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3023 * m68k-dis.c: Include <libiberty.h>.
3024 (print_insn_m68k): Sort the opcode table on the most significant
3025 nibble of the opcode.
3027 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
3029 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
3030 "vsub", "vst", "xnor", and "xor" instructions.
3031 (V_a1): Renamed from V_a, msb of accumulator reg number.
3032 (V_a0): Add macro, lsb of accumulator reg number.
3034 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
3036 * tic80-dis.c (print_insn_tic80): Broke excessively long
3037 function up into several smaller ones and arranged for
3038 the instruction printing function to be callable recursively
3039 to print vector instructions that have both a load and a
3040 math instruction packed into a single opcode.
3041 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
3042 to explain why it comes after the other vector opcodes.
3044 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
3046 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
3047 move insns to handle immediate operands.
3049 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3051 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
3052 fix operand mask in the "moveml" entries for the coldfire.
3054 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
3056 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
3057 New macros for building vector instruction opcodes.
3058 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
3059 FMT_LI, which were unused. The field is now a flags field.
3060 Remove some opcodes that are possible, but illegal, such
3061 as long immediate instructions with doubles for immediate
3062 values. Add "vadd" and "vld" instructions.
3064 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
3066 * tic80-opc.c (tic80_operands): Reorder some table entries to make
3067 the order more logical. Move the shift alias instructions ("rotl",
3068 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
3069 interspersed with the regular sr.x and sl.x instructions. Add
3070 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
3071 "sub", "subu", "swcr", and "trap".
3073 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
3075 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
3076 (OFF_SL_PC): Renamed from OFF_SL.
3077 (OFF_SS_BR): New operand type for base relative operand.
3078 (OFF_SL_BR): New operand type for base relative operand.
3079 (REG_BASE): New operand type for base register operand.
3080 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
3081 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
3082 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
3084 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3085 10 char field, padded with spaces on rhs, rather than a string
3086 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
3087 than old TIC80_OPERAND_RELATIVE. Add support for new
3088 TIC80_OPERAND_BASEREL flag bit.
3090 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
3092 * tic80-dis.c (print_insn_tic80): Print floating point operands
3094 * tic80-opc.c (SPFI): Add single precision floating point
3095 immediate operand type.
3096 (ROTATE): Add rotate operand type for shifts.
3097 (ENDMASK): Add for shifts.
3098 (n): Macro for the 'n' bit.
3099 (i): Macro for the 'i' bit.
3100 (PD): Macro for the 'PD' field.
3101 (P2): Macro for the 'P2' field.
3102 (P1): Macro for the 'P1' field.
3103 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3106 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
3108 * mn10200-dis.c (disassemble): Mask off unwanted bits after
3109 adding in current address for pc-relative operands.
3111 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3113 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3114 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3115 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3116 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3117 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3118 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3119 (REG_SCALED, LSI_SCALED): New operand types.
3120 (E): New macro for 'E' bit at bit 27.
3121 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3122 opcodes, including the various size flavors (b,h,w,d) for
3123 the direct load and store instructions.
3125 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3127 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3129 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3130 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3131 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3132 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3133 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3134 masks with "MASK_* & ~M_*" to get the M bit reset.
3135 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3137 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3139 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3140 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3141 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3143 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3144 CC, SICR, and LICR table entries.
3145 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3146 "bcnd", and "brcr" opcodes.
3148 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3150 * ppc-opc.c (powerpc_operands): Make comment match the
3151 actual fields (no shift field).
3152 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3153 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3154 partial implementation, work in progress.
3155 * tic80-opc.c (tic80_operands): Begin construction operands table.
3156 (tic80_opcodes): Continue populating opcodes table and start
3157 filling in the operand indices.
3158 (tic80_num_opcodes): Add this.
3160 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3162 * m68k-opc.c: Add #B case for moveq.
3164 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3166 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3167 before they are used.
3169 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3171 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3172 for "breakpoint" instruction.
3174 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3176 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3177 (dep): Use ALL_CFLAGS rather than CFLAGS.
3179 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3181 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3184 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3186 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3187 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3189 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3191 * mips16-opc.c: Add "abs".
3193 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3195 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3196 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3197 (disassembler): Add bfd_arch_tic80 support to set disassemble
3198 to print_insn_tic80.
3199 * tic80-dis.c (print_insn_tic80): Add stub.
3201 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3203 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3204 * configure: Regenerate with autoconf.
3205 * tic80-dis.c: Add file.
3206 * tic80-opc.c: Add file.
3208 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3210 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3212 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3214 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3215 (mn10200_opcodes): Use it for some logicals and btst insns.
3216 Add "break" and "trap" instructions.
3218 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3220 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3222 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3224 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3225 relative load or add now depends upon whether the instruction is
3228 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3230 * mn10200-dis.c: Finish writing disassembler.
3231 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3232 Fix mask for "jmp (an)".
3234 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3235 handle endianness issues for mn10300.
3237 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3239 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3241 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3242 instruction. Fix opcode field for "movb (imm24),dn".
3244 * mn10200-opc.c (mn10200_operands): Fix insertion position
3247 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3249 * mn10200-opc.c: Create mn10200 opcode table.
3250 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3251 but moving along nicely.
3253 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3255 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3257 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3259 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3260 specifiers for fmovem* instructions.
3262 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3264 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3266 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3268 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3271 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3273 * mn10300-opc.c: Add some comments explaining the various
3276 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3278 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3280 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3283 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3284 operand specifiers in fmovm* instructions.
3286 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3288 * ppc-opc.c (insert_li): Give an error if the offset has the two
3289 least significant bits set.
3291 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3293 * mips-dis.c (print_insn_mips16): Separate the instruction from
3294 the arguments with a tab, not a space.
3296 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3298 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3301 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3304 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3306 * configure: Rebuild with autoconf 2.12.
3308 Add support for mips16 (16 bit MIPS implementation):
3309 * mips16-opc.c: New file.
3310 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3311 (mips16_reg_names): New static array.
3312 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3313 after seeing a 16 bit symbol.
3314 (print_insn_little_mips): Likewise.
3315 (print_insn_mips16): New static function.
3316 (print_mips16_insn_arg): New static function.
3317 * mips-opc.c: Add jalx instruction.
3318 * Makefile.in (mips16-opc.o): New target.
3319 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3320 * configure: Rebuild.
3322 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3324 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3325 operand specifiers in *save, *restore and movem* instructions.
3327 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3330 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3331 register operands for immediate arithmetic, not, neg, negx, and
3332 set according to condition instructions.
3334 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3335 specifier of the effective-address operand in immediate forms of
3336 arithmetic instructions. The specifier for the immediate operand
3337 notes how and where the constant will be stored.
3339 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3341 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3344 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3347 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3349 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3351 * mn10300-dis.c (disassemble): Handle register lists.
3353 * mn10300-opc.c: Fix handling of register list operand for
3354 "call", "ret", and "rets" instructions.
3356 * mn10300-dis.c (disassemble): Print PC-relative and memory
3357 addresses symbolically if possible.
3358 * mn10300-opc.c: Distinguish between absolute memory addresses,
3359 pc-relative offsets & random immediates.
3361 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3363 (disassemble): Handle SPLIT and EXTENDED operands.
3365 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3367 * mn10300-dis.c: Rough cut at printing some operands.
3369 * mn10300-dis.c: Start working on disassembler support.
3370 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3372 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3374 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3376 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3378 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3380 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3382 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3383 register argument is calls and jmp instructions.
3385 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3387 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3388 getx operand. Fix opcode for mulqu imm,dn.
3390 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3392 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3393 in MN10300_OPERAND_SPLIT operands for how many bits
3394 appear in the basic insn word. Add IMM32_HIGH24,
3395 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3396 (mn10300_opcodes): Use new operands as needed.
3398 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3399 for bset, bclr, btst instructions.
3400 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3402 * mn10300-opc.c (mn10300_operands): Remove many redundant
3403 operands. Update opcode table as appropriate.
3404 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3405 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3407 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3409 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3410 operands (for indexed load/stores). Fix bitpos for DI
3411 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3412 few instructions that insert immediates/displacements in the
3413 middle of the instruction. Add IMM8E for 8 bit immediate in
3414 the extended part of an instruction.
3415 (mn10300_operands): Use new opcodes as appropriate.
3417 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3419 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3420 sequential so the assembler never parallelizes it with
3423 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3425 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3426 a data/address register that appears in register field 0
3427 and register field 1.
3428 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3430 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3432 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3433 standard disassembly.
3435 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3436 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3437 Recategorize PALcode instructions.
3439 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3441 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3443 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3445 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3446 there are no operand types.
3448 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3450 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3452 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3454 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3456 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3458 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3460 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3461 and sst.w instructions.
3463 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3466 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3468 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3471 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3473 * ppc-opc.c (PPCPWR2): Define.
3474 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3477 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3479 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3480 field for movhu instruction.
3482 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3483 cast value to "long" not "signed long" to keep hpux10
3486 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3488 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3491 * mn10300-opc.c (FMT*): Remove definitions.
3493 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3494 for shift-by-register opcodes.
3496 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3497 into [AD][MN][01] for encoding the position of the register
3500 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3502 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3503 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3505 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3507 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3508 Fix various typos. Add "PAREN" operand.
3509 (MEM, MEM2): Define.
3510 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3511 operands. Fix several typos.
3513 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3516 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3518 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3519 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3521 (mn10300_opcodes): Break opcode format out into its own field.
3522 Update many operand fields to deal with signed vs unsigned
3523 issues. Fix one or two typos in the "mov" instruction
3524 opcode, mask and/or operand fields.
3526 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3528 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3529 m68851 wasn't reset.
3531 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3533 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3534 all opcodes. Very rough cut at operands for all opcodes.
3536 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3539 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3541 * mn10200-opc.c, mn10300-opc.c: New files.
3542 * mn10200-dis.c, mn10300-dis.c: New files.
3543 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3544 * disassemble.c: Break mn10x00 support into 10200 and 10300
3546 * configure.in: Likewise.
3547 * configure: Rebuilt.
3549 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3551 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3553 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3555 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3557 * disassemble (ARCH_mn10x00): Define.
3558 (disassembler): Handle bfd_arch_mn10x00.
3559 * configure.in: Recognize bfd_mn10x00_arch.
3560 * configure: Rebuilt.
3562 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3564 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3565 accordingly. Don't declare functions using op_rtn.
3567 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3569 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3570 params to be more standard.
3571 * (disassemble): Print absolute addresses and symbolic names for
3572 branch and jump targets.
3573 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3575 * (v850_opcodes): Add breakpoint insn.
3577 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3579 * m68k-opc.c: Move the fmovemx data register cases before the
3580 other cases, so that they get recognized before the data register
3581 does gets treated as a degenerate register list.
3583 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3585 * mips-opc.c: Add a case for "div" and "divu" with two registers
3586 and a destination of $0.
3588 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3590 * mips-dis.c (print_insn_arg): Add prototype.
3591 (_print_insn_mips): Ditto.
3593 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3595 * mips-dis.c (print_insn_arg): Print condition code registers as
3598 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3600 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3602 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3604 * v850-dis.c (disassemble): Make static. Provide prototype.
3606 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3608 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3611 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3613 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3614 ']' characters into the output stream.
3615 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3616 Add "memop" field to all opcodes (for the disassembler).
3617 Reorder opcodes so that "nop" comes before "mov" and "jr"
3618 comes before "jarl".
3620 * v850-dis.c (print_insn_v850): Fix typo in last change.
3622 * v850-dis.c (print_insn_v850): Properly handle disassembling
3623 a two byte insn at the end of a memory region when the memory
3624 region's size is only two byte aligned.
3626 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3628 * v850-dis.c (v850_reg_names): Define.
3629 (v850_sreg_names, v850_cc_names): Likewise.
3630 (disassemble): Very rough cut at printing operands (unformatted).
3632 * v850-opc.c (BOP_MASK): Fix.
3633 (v850_opcodes): Fix mask for jarl and jr.
3635 * v850-dis.c: New file. Skeleton for disassembler support.
3636 * Makefile.in Remove v850 references, they're not needed here.
3637 * configure.in: Add v850-dis.o when building v850 toolchains.
3638 * configure: Rebuilt.
3639 * disassemble.c (disassembler): Call v850 disassembler.
3641 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3642 (insert_d8_6, extract_d8_6): New functions.
3643 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3644 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3646 (IF4A, IF4B): Use "D7" instead of "D7S".
3647 (IF4C, IF4D): Use "D8_7" instead of "D8".
3648 (IF4E, IF4F): New. Use "D8_6".
3649 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3650 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3652 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3653 (v850_operands): Change D16 to D16_15, use special insert/extract
3654 routines. New new D16 that uses the generic insert/extract code.
3655 (IF7A, IF7B): Use D16_15.
3656 (IF7C, IF7D): New. Use D16.
3657 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3659 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3660 message. Issue an error if the branch offset is odd.
3662 * v850-opc.c: Add notes about needing special insert/extract
3663 for all the load/store insns, except "ld.b" and "st.b".
3665 * v850-opc.c (insert_d22, extract_d22): New functions.
3666 (v850_operands): Use insert_d22 and extract_d22 for
3668 (insert_d9): Fix range check.
3670 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3672 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3673 and set bits field to D9 and D22 operands.
3675 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3677 * v850-opc.c (v850_operands): Define SR2 operand.
3678 (v850_opcodes): "ldsr" uses R1,SR2.
3680 * v850-opc.c (v850_opcodes): Fix opcode specs for
3681 sld.w, sst.b, sst.h, sst.w, and nop.
3683 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3685 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3686 end of the opcode table.
3688 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3690 * d10v-opc.c (pre_defined_registers): Added register pairs,
3691 "r0-r1", "r2-r3", etc.
3693 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3695 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3696 Create I16U for an unsigned 16bit mmediate operand.
3697 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3699 * v850-opc.c (v850_operands): Define EP operand.
3700 (IF4A, IF4B, IF4C, IF4D): Use EP.
3702 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3703 with immediate operand, "movhi". Tweak "ldsr".
3705 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3706 correct. Get sld.[bhw] and sst.[bhw] closer.
3708 * v850-opc.c (v850_operands): "not" is a two byte insn
3710 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3712 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3714 * v850-opc.c (two): Get order of words correct.
3716 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3718 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3719 register source and destination operands.
3720 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3722 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3723 same thinko in "trap" opcode.
3725 * v850-opc.c (v850_opcodes): Add initializer for size field
3728 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3729 Add D8 for 8-bit unsigned field in short load/store insns.
3730 (IF4A, IF4D): These both need two registers.
3731 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3732 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3733 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3734 for "ldsr" and "stsr".
3735 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3738 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3739 short store word (sst.w).
3741 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3743 * v850-opc.c (v850_operands): Added insert and extract fields,
3744 pointers to functions that handle unusual operand encodings.
3746 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3748 * v850-opc.c (v850_opcodes): Enable "trap".
3750 * v850-opc.c (v850_opcodes): Fix order of displacement
3751 and register for "set1", "clr1", "not1", and "tst1".
3753 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3755 * v850-opc.c (v850_operands): Add "B3" support.
3756 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3759 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3761 * v850-opc.c: Close unterminated comment.
3763 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3765 * v850-opc.c (v850_operands): Add flags field.
3766 (v850_opcodes): add move opcodes.
3768 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3770 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3771 * configure: (bfd_v850v_arch) Add new case.
3772 * configure.in: (bfd_v850_arch) Add new case.
3773 * v850-opc.c: New file.
3775 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3777 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3779 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3781 * d10v-opc.c: Add additional information to the opcode
3782 table to help determinine which instructions can be done
3785 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3787 * mpw-make.sed: Update editing of include pathnames to be
3790 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3792 * arm-opc.h: Added "bx" instruction definition.
3794 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3796 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3798 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3800 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3802 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3804 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3806 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3808 * makefile.vms: Update for alpha-opc changes.
3810 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3812 * i386-dis.c (print_insn_i386): Actually return the correct value.
3813 (ONE, OP_ONE): #ifdef out; not used.
3815 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3817 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3818 Changed subi operand type to treat 0 as 16.
3820 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3822 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3825 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3827 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3828 memory transfer instructions. Add new format string entries %h and %s.
3829 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3832 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3834 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3835 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3837 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3839 * alpha-dis.c (print_insn_alpha_osf): Remove.
3840 (print_insn_alpha_vms): Remove.
3841 (print_insn_alpha): Make globally visible. Chose the register
3842 names based on info->flavour.
3843 * disassemble.c: Always return print_insn_alpha for the alpha.
3845 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3847 * d10v-dis.c (dis_long): Handle unknown opcodes.
3849 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3851 * d10v-opc.c: Changes to support signed and unsigned numbers.
3852 All instructions with the same name that have long and short forms
3853 now end in ".l" or ".s". Divs added.
3854 * d10v-dis.c: Changes to support signed and unsigned numbers.
3856 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3858 * d10v-dis.c: Change all functions to use info->print_address_func.
3860 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3862 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3863 move ccr/sr insns more strict so that the disassembler only
3864 selects them when the addressing mode is data register.
3866 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3867 * d10v-opc.c (pre_defined_registers): Declare.
3868 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3869 to pick a better name for the registers.
3871 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3873 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3874 operands for fexpand and fpmerge. From Christian Kuehnke
3875 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3877 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3879 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3880 print routine. Take new regnames and cpumask arguments.
3881 Kill the environment variable nonsense.
3882 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3883 (print_insn_alpha_vms): New function. Do VMS style regnames.
3884 * disassemble.c (disassembler): Test bfd flavour to pick
3885 between OSF and VMS routines. Default to OSF.
3887 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3889 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3890 * configure: Rebuild.
3891 * Makefile.in (install): Use @INSTALL_SHLIB@.
3893 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3895 * configure: (bfd_d10v_arch) Add new case.
3896 * configure.in: (bfd_d10v_arch) Add new case.
3897 * d10v-dis.c: New file.
3898 * d10v-opc.c: New file.
3899 * disassemble.c (disassembler) Add entry for d10v.
3901 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3903 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3904 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3906 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3908 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3909 distinguish between variants of the instruction set.
3910 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3911 distinguish between variants of the instruction set.
3913 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3915 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3916 the 8086 instruction set.
3917 * i386-dis.c: General cleanups. Make most things static. Add
3918 prototypes. Get rid of static variables aflags and dflags. Pass
3919 them as args (to almost everything).
3921 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3923 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3925 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3927 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3928 if the next arg is marked with SRC_IN_DST. Gross.
3930 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3931 we're looking for and find EXR.
3933 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3934 if we're looking for KBIT and we don't find it.
3936 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3939 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3940 3bit immediate operands.
3942 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3944 * Released binutils 2.7.
3946 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3947 <kkaempf@progis.ac-net.de>.
3949 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3951 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3953 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3955 * sparc-dis.c (print_insn_sparclite): New routine to print
3956 sparclite instructions.
3958 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3960 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3962 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3964 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3965 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3966 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3968 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3970 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3971 Use autoconf-set values.
3972 (docdir, oldincludedir): Removed.
3973 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3975 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3977 * alpha-opc.c: New file.
3978 * alpha-opc.h: Remove.
3979 * alpha-dis.c: Complete rewrite to use new opcode table.
3980 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3981 * configure: Rebuild with autoconf 2.10.
3982 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3983 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3985 (alpha-opc.o): New target.
3987 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3989 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3990 Set imm_added_to_rs1 even if the source and destination register
3993 * sparc-opc.c: Add some two operand forms of the wr instruction.
3995 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3997 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
4000 * disassemble.c (disassembler): Handle H8/S.
4001 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
4003 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
4005 * sparc-opc.c: Add beq/teq as aliases for be/te.
4007 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
4008 <sergei@msil.sps.mot.com>.
4010 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
4012 * makefile.vms: New file.
4014 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
4016 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
4018 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
4021 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
4023 * i386-dis.c (OP_OFF): Call append_prefix.
4025 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4027 * ppc-opc.c (instruction encoding macros): Add explicit casts to
4028 unsigned long to silence a warning from the Solaris PowerPC
4031 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
4033 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
4035 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
4037 * sparc-dis.c (X_IMM,X_SIMM): New macros.
4039 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
4040 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
4041 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
4042 cpush, cpusha, cpull sparclet insns.
4044 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
4046 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
4048 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
4050 * sparc-opc.c: Set F_FBR on floating point branch instructions.
4051 Set F_FLOAT on other floating point instructions.
4053 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4055 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
4057 (powerpc_opcodes): Add 860/821 specific SPRs.
4059 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
4061 * configure.in: Permit --enable-shared to specify a list of
4062 directories. Set and substitute BFD_PICLIST.
4063 * configure: Rebuild.
4064 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
4065 uses. Set to @BFD_PICLIST@.
4067 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
4069 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
4070 not "abs", which may be needed for the absolute in something
4071 like btst #0,@10:8. Print L_3 immediates separately from other
4072 immediates. Change ABSMOV reference to ABS8MEM.
4074 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
4076 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4077 (current_arch_mask): New static global.
4078 (compute_arch_mask): New static function.
4079 (print_insn_sparc): Delete sparc_v9_p. New static local
4080 current_mach. Resort opcode table if current_mach changes.
4081 Generalize "insn not supported" test.
4082 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4083 Delete test for v9/!v9.
4084 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4086 (brfc): Split into CBR and FBR for coprocessor/fp branches.
4087 (brfcx): Renamed to FBRX.
4088 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
4089 coprocessor mnemonics are not supported on the sparclet).
4090 (condf): Renamed to CONDF.
4091 (SLCBCC2): Delete F_ALIAS flag.
4093 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
4095 * sparc-opc.c (sparc_opcodes): rd must be 0 for
4096 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
4098 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
4100 * Makefile.in (config.status): Depend upon BFD VERSION file, so
4101 that the shared library version number is set correctly.
4103 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4105 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4106 Miles Bader <miles@gnu.ai.mit.edu>.
4107 * configure: Rebuild.
4109 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4111 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4114 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4116 * configure: Rebuild with autoconf 2.8.
4118 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4120 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4121 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4123 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4125 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4126 since they appear as targets in Makefile.in.
4127 * configure: Rebuild.
4129 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4131 * mpw-make.sed: Edit out shared library support bits.
4133 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4135 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4136 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4137 (sparc_opcodes): Add sparclet insns.
4138 (sparclet_cpreg_table): New static local.
4139 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4140 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4142 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4144 * i386-dis.c (index16): New static variable.
4145 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4147 (OP_indirE): Return result of OP_E.
4148 (OP_E): Check for 16 bit addressing mode, and disassemble
4149 correctly. Optimised 32 bit case a little. Don't print
4150 "(base,index,scale)" when sib specifies only an offset.
4152 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4154 * configure.in: Set and substitute SHLIB_DEP.
4155 * configure: Rebuild.
4156 * Makefile.in (SHLIB_DEP): New variable.
4157 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4158 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4159 COMMON_SHLIB, add them to piclist with appropriate modifications.
4160 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4161 here: just use piclist.
4163 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4165 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4166 (print_insn_sparc): Rewrite v9/not-v9 tests.
4167 (compare_opcodes): Likewise.
4168 * sparc-opc.c (MASK_<ARCH>): Define.
4169 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4170 (sparclet,v6notv9): Define.
4171 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4172 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4174 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4176 * configure.in: Call AC_PROG_CC before configure.host.
4177 * configure: Rebuild.
4179 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4181 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4183 * i386-dis.c (onebyte_has_modrm): New static array.
4184 (twobyte_has_modrm): New static array.
4185 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4187 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4189 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4192 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4194 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4197 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4199 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4200 m68010up, not just m68020up | cpu32.
4202 * Makefile.in (SONAME): New variable.
4203 ($(SHLINK)): Make a link to the transformed name, as well.
4204 (stamp-tshlink): New target.
4205 (install): Skip stamp-tshlink during install.
4207 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4209 * configure.in: Call AC_ARG_PROGRAM.
4210 * configure: Rebuild.
4211 * Makefile.in (program_transform_name): New variable.
4212 (install): Transform library name before installing it.
4214 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4216 * i960-dis.c (mem): Add HX dcinva instruction.
4218 Support for building as a shared library, based on patches from
4219 Alan Modra <alan@spri.levels.unisa.edu.au>:
4220 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4221 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4222 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4223 * configure: Rebuild.
4224 * Makefile.in (ALLLIBS): New variable.
4225 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4226 (COMMON_SHLIB, SHLINK): New variables.
4227 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4228 (STAGESTUFF): Remove variable.
4229 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4230 (stamp-piclist, piclist): New targets.
4231 ($(SHLIB), $(SHLINK)): New targets.
4232 ($(OFILES)): Depend upon stamp-picdir.
4233 (disassemble.o): Build twice if PICFLAG is set.
4234 (MOSTLYCLEAN): Add pic/*.o.
4235 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4236 (distclean): Remove pic and stamp-picdir.
4237 (install): Install shared libraries.
4238 (stamp-picdir): New target.
4240 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4242 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4243 Print unknown instruction as "unknown", rather than in hex.
4245 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4247 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4249 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4251 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4253 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4255 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4256 when necessary. From Ulrich Drepper
4257 <drepper@myware.rz.uni-karlsruhe.de>.
4259 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4261 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4262 sparc_num_opcodes. Update architecture enum values.
4263 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4264 (sparc_opcode_lookup_arch): New function.
4265 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4266 (sparc_opcodes): Add v9a shutdown insn.
4268 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4270 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4271 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4273 (print_insn_sparc64): Deleted.
4274 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4277 * sparc-opc.c (architecture_pname): Add v9a.
4279 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4281 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4282 incorrectly defined as 0x16 when it should be 0x15.
4283 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4284 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4285 excb (exception barrier) which is defined in the Alpha
4286 Architecture Handbook version 2.
4287 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4288 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4289 disassembled as or, for example.
4291 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4293 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4294 (_print_insn_mips): Change i from int to unsigned int.
4296 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4298 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4299 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4301 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4303 * i386-dis.c: Added Pentium Pro instructions.
4305 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4307 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4310 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4312 * sh-opc.h (sh_nibble_type): Added REG_B.
4313 (sh_arg_type): Added A_REG_B.
4314 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4316 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4318 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4320 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4322 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4324 * Makefile.in (distclean): Remove stamp-h. From Ronald
4325 F. Guilmette <rfg@monkeys.com>.
4327 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4329 From David Mosberger-Tang <davidm@azstarnet.com>:
4330 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4333 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4335 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4336 (sh_table): Added many SH3 opcodes.
4337 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4339 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4341 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4342 (subco,subco.): Mark this PPC, not PPCCOM.
4344 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4346 * configure: Rebuild with autoconf 2.7.
4348 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4350 * configure: Rebuild with autoconf 2.6.
4352 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4354 * configure.in: Sort list of architectures. Accept but do nothing
4355 for alliant, convex, pyramid, romp, and tahoe.
4357 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4359 * a29k-dis.c (print_special): Change num to unsigned int.
4361 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4363 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4366 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4368 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4369 * configure: Rebuilt.
4371 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4373 * configure.in: Add case for bfd_i860_arch.
4374 * configure: Rebuild.
4376 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4378 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4379 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4380 (NEXTDOUBLE): Likewise.
4381 (print_insn_m68k): Don't match fmoveml if there is more than one
4382 register in the list.
4383 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4385 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4387 * m68k-opc.c: Use #W rather than #w.
4388 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4390 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4392 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4393 and likewise for all the dbxx opcodes.
4395 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4397 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4399 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4401 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4402 the VR4100 specific instructions to the mips_opcodes structure.
4404 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4406 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4407 ugly Metrowerks bug in CW6, is fixed in CW7.
4409 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4411 * ppc-opc.c (whole file): Add flags for common/any support.
4413 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4415 * Makefile.in (BISON): Remove macro.
4416 (FLAGS_TO_PASS): Remove BISON.
4418 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4420 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4422 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4423 instructions that take no args by looking at the match mask.
4424 (print_insn_arg): Always print "%" before register names.
4425 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4426 [case '_']: Don't print "@#" before address.
4427 [case 'J']: Use "%s" as format string, not register name.
4428 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4430 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4432 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4435 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4437 From David Mosberger-Tang <davidm@azstarnet.com>
4439 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4440 (alpha_insn_set): added definitions for VAX floating point
4441 instructions (Unix compilers don't generate these, but handcoded
4442 assembly might still use them).
4444 * alpha-dis.c (print_insn_alpha): added support for disassembling
4445 the miscellaneous instructions in the Alpha instruction set.
4447 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4449 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4450 no longer create sysdep.h, sed ppc-opc.c to work around a
4451 serious Metrowerks C bug.
4452 * mpw-make.in: Remove.
4453 * mpw-make.sed: New file, used by mpw-configure to edit
4454 Makefile.in into an MPW makefile.
4456 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4458 * Makefile.in (maintainer-clean): New synonym for realclean.
4460 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4462 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4463 which use '0', '1', and '2' instead. Specify the proper size for
4464 a pmove immediate operand. Correct the pmovefd patterns to be
4465 moves to a register, not from a register.
4466 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4468 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4470 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4471 %psr, %wim, %tbr as F_NOTV9.
4473 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4475 * Makefile.in (Makefile): Just rebuild Makefile when running
4477 (config.h, stamp-h): New targets.
4478 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4479 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4480 rebuilding config.h.
4481 * configure: Rebuild.
4483 * mips-opc.c: Change unaligned loads and stores with "t,A"
4484 operands to use "t,A(b)".
4486 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4488 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4490 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4492 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4493 until 3 instead of until 2.
4495 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4497 * Makefile.in (ALL_CFLAGS): Define.
4498 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4499 (MOSTLYCLEAN): Add config.log.
4500 (distclean): Don't remove config.log.
4501 * configure.in: Substitute HDEFINES.
4502 * configure: Rebuild.
4504 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4506 * sh-opc.h (sh_arg_type): Add F_FR0.
4507 (sh_table, case fmac): Add F_FR0 as first argument.
4509 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4511 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4513 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4515 * sparc-dis.c: Remove all references to NO_V9.
4517 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4519 * aclocal.m4: Just include ../bfd/aclocal.m4.
4520 * configure: Rebuild.
4522 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4524 * sparc-dis.c (X_DISP19): Define.
4525 (print_insn, case 'G'): Use it.
4526 (print_insn, case 'L'): Sign extend displacement.
4528 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4530 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4531 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4532 host_makefile_frag or frags.
4533 * aclocal.m4: New file.
4534 * configure: Rebuild.
4535 * Makefile.in (INSTALL): Set to @INSTALL@.
4536 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4537 (INSTALL_DATA): Set to @INSTALL_DATA@.
4539 (AR_FLAGS): Set to rc rather than qc.
4540 (CC): Define as @CC@.
4541 (CFLAGS): Set to @CFLAGS@.
4542 (@host_makefile_frag@): Remove.
4543 (config.status): Remove dependency upon @frags@.
4545 * configure.in: ../bfd/config.bfd now just sets shell variables.
4546 Use them rather than looking through target Makefile fragments.
4547 * configure: Rebuild.
4549 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4551 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4553 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4555 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4556 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4559 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4560 (lookup_{name,value}): New functions.
4561 (prefetch_table): New static local.
4562 (sparc_{encode,decode}_prefetch): New functions.
4563 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4565 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4567 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4570 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4572 * sh-dis.c: Correct comment on first line of file.
4574 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4576 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4578 * sparc-opc.c (asi, membar): New static locals.
4579 (sparc_{encode,decode}_{asi,membar}): New functions.
4580 (sparc_opcodes, membar insn): Fix.
4581 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4582 Support decoding of membar masks.
4585 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4587 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4589 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4591 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4592 and likewise for the other branches. Add bhs as an alias for bcc,
4593 and likewise for the size variants. Add dbhs as an alias for
4596 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4598 * sh-opc.h (FP sts instructions): Update to match reality.
4600 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4602 * m68k-dis.c: (fpcr_names): Add % before all register names.
4603 (reg_names): Likewise.
4604 (print_insn_arg): Don't explicitly print % before register names.
4605 Add % before register names in static array names. In case 'r',
4606 print data registers as `@(Dn)', not `Dn@'. When printing a
4607 memory address, don't print @# before it.
4608 (print_indexed): Change base_disp and outer_disp from int to
4609 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4610 syntax. Sign extend 8 byte displacement correctly.
4611 (print_base): Print using MIT syntax. Print zpc when appropriate.
4612 Change parameter disp from int to bfd_vma.
4614 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4617 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4619 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4620 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4621 * sh-opc.h (sh_arg_type): Add new operand types.
4622 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4624 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4626 * Makefile.in (distclean): Remove generated file config.h.
4628 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4630 * Makefile.in (distclean): Remove generated file config.h.
4632 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4634 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4636 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4638 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4639 rather than numopcodes. Use m68k_opcodes rather than removed
4640 opcode function. Don't check F_ALIAS.
4641 (print_insn_arg): Change first parameter to be const char *.
4642 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4643 (m68k-opc.o): New target.
4644 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4645 * configure: Rebuild.
4647 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4649 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4650 (opcode_bits, opcode_hash_table): New variables.
4651 (opcodes_initialized): Renamed from opcodes_sorted.
4652 (build_hash_table): New function.
4653 (is_delayed_branch): Use hash table.
4654 (print_insn): Renamed from print_insn_sparc, made static.
4655 Build and use hash table. If !sparc64, ignore sparc64 insns,
4656 and vice-versa if sparc64.
4657 (print_insn_sparc, print_insn_sparc64): New functions.
4658 (compare_opcodes): Move sparc64 opcodes to end.
4659 Print commutative insns with constant second.
4660 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4662 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4664 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4665 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4666 avoids printing a delay slot in a delay slot.
4667 * sh-opc.h (sh_table): Fully bracket last entry.
4669 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4671 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4673 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4675 * configure.in: Get host_makefile_frag from ${srcdir}.
4677 * configure.in: Autoconfiscated. Check for string[s].h. Create
4678 config.h from config.in. Don't set up sysdep.h link.
4679 * sysdep.h: New file.
4680 * configure, config.in: New files, generated from configure.in.
4681 * Makefile.in: Updated to be processed autoconf-style.
4682 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4683 (Makefile): Depend on config.status.
4684 (config.status): New rule.
4685 * configure.bat: Update Makefile substitutions.
4687 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4689 * mips-opc.c (L1): Define.
4690 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4691 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4694 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4696 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4697 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4698 have multiple add units but only a single logical unit.
4700 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4701 shifted by 18, without any insertion or extraction function.
4702 (insert_cr, extract_cr): Remove.
4704 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4706 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4709 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4711 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4712 * sh-opc.h: Add copyright.
4714 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4716 * Makefile.in (crunch-m68k): Delete extra target accidentally
4717 checked in a while ago.
4719 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4721 * sh-opc.h (sh_table): Add SH3 support.
4723 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4725 * sh-opc.h: Added bsrf and braf.
4727 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4729 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4730 bogus [ls]fm{ea,fd} patterns.
4732 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4733 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4734 initialize it from memory. Make function static.
4735 (print_insn_{big,little}_arm): New functions.
4736 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4737 the correct endianness.
4739 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4741 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4744 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4746 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4747 17th, so that it builds again using GCC as the compiler.
4749 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4751 * mips-dis.c (print_insn_little_mips): Cast return value from
4752 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4753 expects an unsigned long, and that might be fewer words of
4754 argument storage (e.g., if bfd_vma is long long on a 32-bit
4756 (print_insn_big_mips): Likewise with bfd_getb32 value.
4757 (_print_insn_mips): Now static.
4759 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4761 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4762 gcc memory hog problem with initializer is fixed.
4764 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4766 Merge in support for Mac MPW as a host.
4767 (Old change descriptions retained for informational value.)
4769 * mpw-config.in (archname): Compute from the config.
4770 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4772 * mpw-config.in (target_arch): Compute from canonical target.
4773 (m68k, mips, powerpc, sparc): Add architectures.
4774 * mpw-make.in (disassemble.c.o): Add.
4775 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4777 * mpw-config.in (BFD_MACHINES): Set to a default value.
4778 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4780 * mpw-make.in (CSEARCH): Add extra-include to search path.
4782 * mpw-config.in (varargs.h): Don't create.
4783 (sysdep.h): Create using forward-include.
4784 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4786 * mpw-config.in: New file, MPW version of configure.in.
4787 * mpw-make.in: New file, MPW version of Makefile.in.
4789 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4791 * alpha-dis.c (print_insn_alpha): Put empty statement after
4794 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4796 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4797 (low_sign_extend): Likewise.
4798 (get_field): Delete unused function.
4799 (set_field, deposit_14, deposit_21): Likewise.
4801 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4803 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4806 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4808 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4810 * alpha-opc.h (OSF_ASMCODE): define
4811 print pal-code names as defined in App C of the
4812 Alpha Architecture Reference Manual
4814 * alpha-dis.c: cleaned up output
4815 print stylized code forms as defined in App A.4.3 of the
4816 Alpha Architecture Reference Manual
4818 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4820 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4822 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4825 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4827 * m68k-dis.c (opcode): New function. Returns address of opcode
4828 table entry given index, even if the opcode table was split to
4829 work around gcc bugs.
4830 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4832 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4833 (reg_names): Now const.
4834 (print_insn_arg): Arrays cacheFieldName and names now const.
4835 (print_indexed): Array scales now const.
4837 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4839 * ppc-opc.c: Sort recently added instructions by minor opcode
4840 number within major opcode number.
4842 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4844 * hppa-dis.c: Include libhppa.h.
4846 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4848 * mips-opc.c: Change dli to use M_DLI, and add dla.
4850 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4852 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4854 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4856 * mips-opc.c: Add r4650 mul instruction.
4858 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4860 * mips-opc.c: Add uld and usd macros for unaligned double load and
4863 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4865 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4866 mfdcr, mtdcr, icbt, iccci.
4868 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4870 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4871 signed char fields to shorts, more portable.
4873 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4875 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4876 char fields as signed chars, since they may have negative values.
4878 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4880 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4881 (mycroft@netbsd.org).
4883 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4885 From "Logg, Ed" <elogg@ea.com>:
4886 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4887 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4890 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4892 * ppc-opc.c: Changes based on patch from David Edelsohn
4893 <edelsohn@mhpcc.edu>.
4894 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4897 (insert_tbr): New static function.
4898 (extract_tbr): New static function.
4899 (XFXFXM_MASK, XFXM): Define.
4900 (XSPRBAT_MASK, XSPRG_MASK): Define.
4901 (powerpc_opcodes): Add instructions to access special registers by
4902 name. Add mtcr and mftbu.
4904 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4906 * mips-opc.c (P3): Define.
4907 (mips_opcodes): Add mad and madu.
4909 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4911 * configure.in: Add W65 support.
4912 * disassemble.c: Likewise.
4913 * w65-opc.h, w65-dis.c: New files.
4915 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4917 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4920 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4922 * mips-opc.c: Add dli as a synonym for li.
4924 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4926 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4927 print something for reserved opcode values, even if it won't
4930 * mips-dis.c (_print_insn_mips): When initializing, shift right
4931 and mask, to avoid sign extension problems on the Alpha.
4933 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4936 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4938 * sh-opc.h (mov.l gbr): Get direction right.
4939 * sh-dis.c (print_insn_shx): New function.
4940 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4941 print opcodes with right byte order.
4943 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4945 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4946 to avoid conflicts with getopt.
4948 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4950 * hppa-dis.c (print_insn_hppa): Read the instruction using
4951 bfd_getb32, so that it works on a little endian or 64 bit host.
4952 Remove unused local variable op.
4954 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4956 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4957 addu does not work correctly if -mips3.
4959 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4961 * a29k-dis.c (print_special): Add special register names defined
4962 on 29030, 29040 and 29050.
4963 (print_insn): Handle new operand type 'I'.
4965 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4967 * Makefile.in (INSTALL): Use top level install.sh script.
4969 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4971 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4972 that it works on a little endian host.
4974 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4976 * configure.in: Use ${config_shell} when running config.bfd.
4978 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4980 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4982 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4984 * a29k-dis.c (print_insn): Print the opcode.
4986 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4988 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4990 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4992 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4994 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4996 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4997 which store a value into memory.
4999 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
5001 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
5002 * arm-dis.c, arm-opc.h: New files.
5004 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
5006 * Makefile.in (ns32k-dis.o): Add dependency.
5007 * ns32k-dis.c (print_insn_arg): Declare initialized local as
5008 string, not as array of chars.
5010 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5012 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
5014 * sparc-opc.c: Added sparclite extended FP operations, and
5015 versions of v9 impdep* instructions permitting specification of
5018 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5020 * i960-dis.c (reg_names): Now const.
5021 (struct sparse_tabent): New type, copied from array type in mem
5023 (ctrl): Local static array ctrl_tab now const.
5024 (cobr): Local static array cobr_tab now const.
5025 (mem): Local variables reg1, reg2, reg3 now point to const. Local
5026 static variable mem_tab no longer explicitly initialized. Changed
5027 mem_init to const array of struct sparse_tabent.
5028 (reg): Local static variable reg_tab no longer explicitly
5029 initialized. Changed reg_init to const array of struct
5031 (ea): Local static array scale_tab now const.
5033 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
5036 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
5038 * configure.bat: the disassember needs to be enabled for
5039 "objdump -d" to work in djgpp.
5041 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5043 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
5044 (invalid_float): Enabled general version, doesn't require running
5045 on ns32k host. Changed to take char* argument, and test for
5046 explicitly specified sizes, instead of using sizeof() on host CPU
5048 (INVALID_FLOAT): Cast first argument.
5049 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
5050 list_P032, list_M032): Now const.
5051 (optlist, list_search): Made appropriate arguments now point to
5053 (print_insn_arg): Changed static array of one-character-string
5054 pointers into a static const array of characters; fixed sprintf
5055 statement accordingly.
5057 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
5059 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
5060 from distribution. A ns32k-dis.c from a previous distribution has
5061 been brought up to date and supports the new interface.
5063 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
5065 * configure.in: add bfd_ns32k_arch target support.
5067 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
5068 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
5070 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
5072 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
5075 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
5077 * h8300-dis.c, mips-dis.c: Don't use true and false.
5079 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
5081 * configure.in: Change --with-targets to --enable-targets.
5083 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5085 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5086 opcodes to the first instruction with that opcode, to speed
5087 disassembly of large files. From ralphc@pyramid.com (Ralph
5090 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5092 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5094 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
5096 * configure.bat: update to latest makefile.in
5098 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
5100 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5101 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5102 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5103 slot insn is in a delay slot.
5104 * z8k-opc.h: (resflg): Fix patterns.
5105 * h8500-opc.h Fix CR insn patterns.
5107 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5109 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5110 "cmpl" before POWER versions, so that gas -many uses them.
5112 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5114 * disassemble.c: New file.
5115 * Makefile.in (OFILES): Add disassemble.o.
5116 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5117 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5118 binutils/configure.in.
5120 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5121 opcode being examined.
5123 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5125 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5126 (insert_ral, insert_ram, insert_ras): New functions.
5127 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5128 RAS for store with update.
5130 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5132 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5133 (edelsohn@npac.syr.edu).
5135 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5137 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5140 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5142 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5144 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5146 * ppc-opc.c (powerpc_operands): The signedp field has been
5147 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5148 instead. Add new operand SISIGNOPT.
5149 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5150 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5151 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5154 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5156 * i386-dis.c (struct private): Renamed to dis_private. `private'
5157 is a reserved word for dynix cc.
5159 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5161 * configure.in: Change error message to refer to bfd/config.bfd
5162 rather than bfd/configure.in.
5164 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5166 * ppc-opc.c: Define POWER2 as short alias flag.
5167 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5170 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5172 * i960-dis.c (print_insn_i960): Don't read a second word for
5173 opcodes 0, 1, 2 and 3.
5175 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5177 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5179 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5181 * m68881-ext.c: Removed; no longer used.
5182 * Makefile.in: Changed accordingly.
5184 * m68k-dis.c (ext_format_68881): Don't declare.
5185 (print_insn_m68k): If an instruction uses place 'i', it uses at
5186 least four fixed bytes.
5187 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5188 extended float, convert to double using floatformat_to_double, not
5189 ieee_extended_to_double, and fetch the data before converting it.
5191 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5193 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5194 davidj@ICSI.Berkeley.EDU (David Johnson).
5196 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5198 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5199 PowerPC uses bdnz[l][a].
5201 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5203 * dis-buf.c, i386-dis.c: Include sysdep.h.
5205 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5207 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5209 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5210 by Motorola PowerPC 601 with PPC_OPCODE_601.
5211 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5212 Disassemble Motorola PowerPC 601 instructions as well as normal
5213 PowerPC instructions.
5215 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5217 * i960-dis.c (reg, mem): Just use a static array instead of
5220 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5222 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5223 condition name index if this is for a negated condition.
5225 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5226 Floating point format for 'H' operand is backwards from normal
5227 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5228 operands (fmpyadd and fmpysub), handle bizarre register
5229 translation correctly for single precision format.
5231 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5232 or 'I' operands if the next format specifier is 'M' (fcmp
5233 condition completer).
5235 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5237 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5238 single number giving a bitmask for the MB and ME fields of an M
5239 form instruction. Change NB to accept 32, and turn it into 0;
5240 also turn 0 into 32 when disassembling. Seperated SH from NB.
5241 (insert_mbe, extract_mbe): New functions.
5242 (insert_nb, extract_nb): New functions.
5243 (SC_MASK): Mask out SA and LK bits.
5244 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5245 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5246 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5247 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5248 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5249 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5250 (powerpc_macros): Define table of macro definitions.
5251 (powerpc_num_macros): Define.
5253 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5254 if PPC_OPERAND_NEXT is set.
5256 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5258 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5259 char. Retrieve contents using bfd_getl32 instead of shifting.
5261 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5263 * ppc-opc.c: New file. Opcode table for PowerPC, including
5264 opcodes for POWER (RS/6000).
5265 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5266 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5267 (CFILES): Add ppc-dis.c.
5268 (ppc-dis.o, ppc-opc.o): New targets.
5269 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5271 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5273 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5274 No space before 'u', 'f', or 'N'.
5276 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5278 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5279 farther than we should.
5281 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5283 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5285 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5287 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5289 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5290 needs it, to prevent reading past the end of a section.
5292 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5294 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5295 Removed t,A case for la; always use t,A(b) case.
5297 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5299 From Ted Lemen <mellon@pepper.ncd.com>
5300 * mips-dis.c (print_insn_arg): Handle 'k'.
5301 * mips-opc.c: Make cache use k, not t.
5303 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5305 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5306 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5307 FLOAT_FORMAT_CODE to put out floating point register names.
5309 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5311 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5313 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5315 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5317 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5319 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5320 larger than 32. Moved dsxx32 variants first for disassembler.
5322 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5324 * z8kgen.c, z8k-opc.h: Add full lda information.
5326 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5328 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5329 movb instructions. Any necessary space will be emitted by
5330 the code to handle nullification completers.
5332 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5334 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5336 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5338 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5339 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5341 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5343 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5345 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5347 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5348 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5350 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5352 * m88k-dis.c (m88kdis): comment change. Remove space after
5354 (printop): handle new arg types DEC and XREG for m88110.
5356 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5358 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5359 type for absolute branch addresses. Delete special
5360 "ble" and "be" code in 'W' operand code.
5362 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5364 * mips-opc.c: Set hazard information correctly for branch
5365 likely instructions.
5367 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5369 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5370 info->fprintf_func for printing and info->print_address_func for
5373 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5375 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5377 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5379 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5380 Corrected second case of "b" for disassembler.
5382 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5384 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5385 to BFD swapping routines to correspond to BFD name changes.
5387 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5389 * mips-opc.c: Change div machine instruction to be z,s,t rather
5390 than s,t. Change div macro to be d,v,t rather than d,s,t.
5391 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5392 rem and remu which generates only the corresponding div
5393 instruction. This is for compatibility with the MIPS assembler,
5394 which only generates the simple machine instruction when an
5395 explicit destination of $0 is used.
5396 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5398 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5400 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5401 WR_31 hazard for bal, bgezal, bltzal.
5403 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5405 * hppa-dis.c (print_insn_hppa): Use print function
5406 from within the disassemble_info, not fprintf_filtered.
5408 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5410 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5411 Law, law@cs.utah.edu.)
5413 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5415 * mips-opc.c ("absu"): Removed.
5418 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5420 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5421 Changed hazard information to distinguish between memory load
5422 delays and coprocessor load delays.
5424 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5426 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5428 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5430 * configure.in: Don't pass cpu to config.bfd.
5432 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5434 * m88k-dis.c (m88kdis): Make class unsigned.
5436 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5438 * alpha-dis.c (print_insn_alpha): One branch format case was
5439 missing the instruction name.
5441 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5443 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5444 Add the arch-specific auxiliary files.
5445 (OFILES): Remove the arch-specific auxiliary files
5446 and use BFD_MACHINES instead of DIS_LIBS.
5447 * configure.in: Set BFD_MACHINES based on --with-targets option.
5449 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5451 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5454 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5456 * sparc-opc.c: Change CONST to const to deal with gcc
5457 -Dconst=__const -traditional.
5459 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5461 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5462 coprocessor instructions out of #if 0, and made them use new
5465 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5467 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5469 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5471 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5472 instruction, for use by the disassembler.
5474 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5475 hand-coded sign extensions that depended on 32-bit host ints.
5476 FIXME, we still depend on big-endian host bitfield ordering.
5477 (sparc_print_insn): Set the insn_info_valid field, and the
5478 other fields that describe the instruction being printed.
5480 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5482 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5483 `jmp' instead of just one of them.
5485 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5487 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5488 (fput_fp_reg_r): Renamed from fput_reg_r.
5489 (fput_fp_reg): New function.
5490 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5492 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5494 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5496 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5498 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5500 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5501 don't output a space.
5503 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5505 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5507 * mips-opc.c: New file, containing opcode table from
5508 ../include/opcode/mips.h.
5509 * Makefile.in: Add it.
5511 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5513 * m88k-dis.c: New file, moved in from gdb and changed to use the
5514 new dis-asm.h disassembler interface.
5515 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5516 (m88k-dis.o): New target.
5518 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5520 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5521 argument string const char * to correspond to opcode/mips.h.
5523 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5525 * mips-dis.c: Updated to account for name changes in new version
5527 * Makefile.in: Added header file dependencies.
5529 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5531 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5533 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5535 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5536 extend, rather than shifts.
5538 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5540 * Makefile.in: Undo 15 June change.
5542 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5544 * m68k-dis.c (print_insn_arg): Change return value to byte count
5546 * m68k-dis.c: Re-write to detect invalid operands before
5547 printing anything, so we can handle this the same way we
5548 handle invalid opcodes.
5550 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5552 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5554 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5556 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5559 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5561 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5563 * configure.in: Do make sysdep.h link.
5564 * Makefile.in: Search ../include. Don't search ../bfd.
5566 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5568 Changes from Jeff Law, law@cs.utah.edu:
5569 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5570 Do not print a space before the completers specified by
5573 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5575 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5576 defined, since gdb has been fixed.
5578 Changes from Jeff Law, law@cs.utah.edu:
5579 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5580 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5581 be a *disassemble_info, not a *FILE.
5582 * hppa-dis.c: Support 'd', '!', and 'a'.
5583 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5584 * hppa-dis.c: Delete cases which are no longer needed.
5586 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5588 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5590 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5592 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5595 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5597 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5598 * configure.in: No longer need to configure to get sysdep.h.
5600 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5602 * Patches from Jeffrey Law <law@cs.utah.edu>.
5603 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5604 templates for 1.1 FP computational instructions.
5606 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5608 * h8500-dis.c (print_insn_h8500): Address argument is type
5610 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5613 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5614 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5616 * sparc-dis.c (compare_opcodes): Move static declaration to
5619 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5621 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5622 instruction, remove unimp hack from 'l' argument.
5624 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5626 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5629 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5631 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5632 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5635 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5637 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5638 arrays of string pointers to 2-d arrays of chars, to save
5641 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5643 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5644 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5646 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5648 * hppa-dis.c: New file from Utah, adapted to new disassembler
5650 * Makefile.in: Include it.
5652 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5654 * sh-dis.c, sh-opc.h: New files.
5656 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5658 * alpha-dis.c, alpha-opc.h: New files.
5660 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5662 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5665 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5667 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5669 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5671 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5674 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5676 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5677 and double percent signs a few places.
5679 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5681 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5682 Use info->print_address_func not print_address.
5684 * dis-buf.c (generic_print_address): New function.
5686 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5688 * Makefile.in: Add sparc-dis.c.
5689 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5691 Add `add' instruction to the set that get checked
5692 for a preceding `sethi' in order to print an absolute address.
5693 * (print_insn): Disassembly prefers real instructions.
5694 (is_delayed_branch): Speed up.
5695 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5696 Still missing some float ops, and needs testing.
5697 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5698 F_ALIAS. Use printf, not fprintf, when not passing a file
5700 (compare_opcodes): Check that identical instructions have
5701 identical opcodes, complain otherwise.
5704 * Include reg_names.
5706 Use dis-asm.h/read_memory_func interface.
5708 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5710 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5711 deliberately return non-zero to setjmp from longjmp. Otherwise
5712 this code fails to compile.
5714 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5716 * m68k-dis.c: Fix prototype for fetch_arg().
5718 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5720 * dis-buf.c: New file, for new read_memory_func interface.
5721 Makefile.in (OFILES): Include it.
5722 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5723 Use new read_memory_func interface.
5725 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5727 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5728 * h8500-opc.h: Fix couple of opcodes.
5730 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5732 * Makefile.in: add dvi & installcheck targets
5734 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5736 * Makefile.in: Update for h8500-dis.c.
5738 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5740 * h8500-dis.c, h8500-opc.h: New files
5742 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5744 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5745 ../include/dis-asm.h.
5746 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5747 and ../gdb/m68k-pinsn.c).
5748 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5749 and ../gdb/i386-pinsn.c).
5750 * m68881-ext.c: New file. Moved definition of
5751 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5752 * Makefile.in: Adjust for new files.
5753 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5754 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5755 can be dis-assembled.
5757 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5759 * mips-dis.c (print_insn_arg): Now returns void.
5761 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5763 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5764 files that use the macros.
5766 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5768 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5769 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5770 (CFILES): Added mips-dis.c.
5772 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5774 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5775 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5777 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5779 * Makefile.in: Improve *clean rules.
5780 * configure.in: Allow a default host.
5782 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5784 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5785 files include other sysdep files
5787 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5789 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5791 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5793 * configure.in: For host support, use ../bfd/configure.host
5794 so it stays in sync with the ../bfd/hosts database.
5796 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5798 * configure.in: use cpu-vendor-os triple instead of nested cases
5800 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5802 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5803 *always* the wrong one.
5805 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5807 * z8kgen.c: added copyright info
5809 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5811 * z8k-dis.c (unparse_instr): prettier tabs
5812 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5814 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5816 * configure.in: Add ncr* configuration.
5817 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5818 picayune ANSI compilers happy.
5820 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5822 * configure.in (i386): Make i386 and i486 synonymous for now.
5823 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5825 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5827 * Makefile.in (install): Fix typo.
5829 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5831 * Makefile.in (make): Remove obsolete crud.
5832 (sparc-opc.o): Avoid Sun Make VPATH bug.
5834 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5836 * Makefile.in: since there are no SUBDIRS, remove rule and
5837 references of subdir_do.
5839 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5841 * Makefile.in (install): Get the library name right here too.
5842 Don't install bfd.h, since it's unrelated to this library. No
5843 subdirs to recurse into, either.
5844 (CFILES): The source file has a .c suffix, not .o.
5846 * sparc-opc.c: New file, moved from BFD.
5847 * Makefile.in (OFILES): Build it.
5849 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5851 * z8k-dis.c: fixed forward refferences of some declarations.
5853 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5855 * Makefile.in: get the name of the library right
5857 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5859 * z8k-dis.c: knows how to disassemble z8k stuff
5860 * z8k-opc.h: new file full of z8000 opcodes
5864 version-control: never