opcodes/ChangeLog

   1 2001-07-24  Kazu Hirata  <kazu@hxi.com>
   2
   3         * alpha-dis.c: Fix formatting.
   4         * cris-dis.c: Likewise.
   5         * m10300-dis.c: Likewise.
   6         * tic54x-dis.c: Likewise.
   7
   8 2001-07-23  Kazu Hirata  <kazu@hxi.com>
   9
  10         * m68k-dis.c: Fix formatting.
  11         * pj-dis.c: Likewise.
  12         * s390-dis.c: Likewise.
  13         * z8k-dis.c: Likewise.
  14
  15 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
  16
  17         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
  18         into the rest of the surrounding definitions.
  19
  20 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
  21
  22         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
  23         for lgdt, lidt, sgdt, sidt.
  24
  25 2001-07-13  Philip Blundell  <philb@gnu.org>
  26
  27         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
  28
  29 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
  30
  31         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
  32         regex support.
  33         (@arch@_cgen_build_insn_regex): New routine from Graydon.
  34         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
  35         to verify if it is worth parsing the insn as insn "x".  Also update
  36         error message when insn is not a recognized format of the insn vs
  37         when the insn is completely unrecognized.
  38
  39 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
  40
  41         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
  42         bfd_get_bits.
  43         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
  44         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
  45
  46 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
  47
  48         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
  49         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
  50         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
  51
  52 2001-07-05  Ben Elliston  <bje@redhat.com>
  53
  54         * Makefile.am (CPUDIR): Define.
  55         (stamp-m32r): Update dependencies.
  56         (stamp-fr30): Ditto.
  57         (stamp-openrisc): Ditto.
  58         * Makefile.in: Regenerate.
  59
  60 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
  61
  62         * ppc-opc.c: Fix encoding of 'clf' instruction.
  63
  64 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
  65
  66         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
  67
  68 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
  69
  70         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
  71         * cgen-opc.c (cgen_keyword_add): Ignore special first
  72         character when building nonalpha_chars field.
  73
  74 2001-06-24  Ben Elliston  <bje@redhat.com>
  75
  76         * m88k-dis.c: Format to conform to GNU coding standards.
  77
  78 2001-06-23  Andreas Jaeger  <aj@suse.de>
  79
  80         * disassemble.c (disassembler_usage): Add unused attribute.
  81
  82 2001-06-22  Eric Christopher  <echristo@redhat.com>
  83
  84         * mips-opc.c: Move prefx to start of the table.
  85
  86 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
  87
  88         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
  89         instruction.
  90
  91 2001-06-22  Pauli <pauli@moreton.com.au>
  92
  93         * m68k-opc.c: Add wdebug instruction.
  94
  95 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
  96
  97         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
  98
  99 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 100
 101         * cgen-asm.c (cgen_parse_keyword): When looking for the
 102         boundaries of a keyword, allow any special characters
 103         that are actually in one of the allowed keyword.
 104         * cgen-opc.c (cgen_keyword_add): Add any special characters
 105         to the nonalpha_chars field.
 106
 107 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 108
 109         * s390-opc.c: Add lgh instruction.
 110         * s390-opc.txt: Likewise.
 111
 112 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 113
 114         * i386-dis.c: Group function prototypes in one place.
 115         (FLOATCODE): Redefine as 1.
 116         (USE_GROUPS): Redefine as 2.
 117         (USE_PREFIX_USER_TABLE): Redefine as 3.
 118         (X86_64_SPECIAL): Define as 4.
 119         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 120         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 121         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 122         (dis386): New table combining above four tables.
 123         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 124         (dis386_twobyte): New table combining above two tables.
 125         (x86_64_table): New table to handle x86_64.
 126         (X86_64_0): Define.
 127         (float_mem_att, float_mem_intel): Delet.
 128         (float_mem): New table combining above two tables.
 129         (print_insn_i386): Modify for above.
 130         (dofloat): Likewise.
 131         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 132         Return 0 on success, 1 if no valid alternative.
 133         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 134         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 135         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 136         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 137         if not 64-bit mode.
 138         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 139         (OP_I64): If not 64-bit mode, call OP_I.
 140         OP_OFF64): If not 64-bit mode, call OP_OFF.
 141         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 142         'ignore'/'ignored' to 'bytemode'.
 143
 144 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 145
 146         * configure.in: Sort 'ta' case statement.
 147         * configure: Regenerate.
 148
 149         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 150         loop,jcxz insns.
 151         (disx86_64_att): Likewise.
 152         (dis386_twobyte_att): Likewise.
 153         (print_insn_i386): Don't print branch hints as a prefix.
 154         (putop): 'H' macro prints branch hints.
 155         (get64): Kill compile warnings.
 156
 157 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 158
 159         * sh-opc.h (sh_table): Don't use empty initializers.
 160
 161 2001-06-06  Christian Groessler <cpg@aladdin.de>
 162
 163         * z8k-dis.c: Fix formatting.
 164         (unpack_instr): Remove unused cases in switch statement. Add
 165         safety abort() in default case.
 166         (unparse_instr): Add safety abort() in default case.
 167
 168 2001-06-06  Peter Jakubek <pjak@snafu.de>
 169
 170         * m68k-dis.c (print_insn_m68k): Fix typo.
 171         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 172         mcf (ColdFire) div, rem and moveb instructions.
 173
 174 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 175
 176         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 177         (cond_jump_mode, loop_jcxz_mode): Define.
 178         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 179         appropriate, and 'F' suffix to loop insns.
 180         (disx86_64_att): Likewise.
 181         (dis386_twobyte_att): Likewise.
 182         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 183         Output data size prefix for long conditional jumps.  Output cs and
 184         ds branch hints.
 185         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 186         (OP_J): Don't make PREFIX_DATA used.
 187
 188 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 189
 190         * sh-opc.h (sh_table): Complete last element entry to avoid
 191         compiler warning.
 192
 193 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 194
 195         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 196
 197 2001-05-23  Alan Modra  <amodra@one.net.au>
 198
 199         * arc-opc.c: Whitespace changes.
 200
 201 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 202
 203         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 204         last element.
 205
 206 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 207
 208         * cgen-dis.in (extract_normal): Complete support for min<base case.
 209
 210 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 211
 212         * mips-dis.c (INSNLEN): Rename MAXLEN.
 213         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 214         (print_insn_arg): Remove $ prefix of register names.
 215         (set_mips_isa_type): Remove.
 216         (mips_isa_type): New function.
 217         (get_mips_isa): New Function.
 218         (print_insn_mips): Rename _print_insn_mips.
 219         (_print_insn_mips): New function, contains code which was
 220         duplicated in print_insn_big_mips and print_insn_little_mips.
 221         (print_insn_big_mips): Moved code to _print_insn_mips.
 222         (print_insn_little_mips): Likewise.
 223         (print_mips16_insn_arg): Remove $ prefix of register names.
 224         Print error message before abort.
 225
 226 2001-05-14  J.T. Conklin  <jtc@redback.com>
 227
 228         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 229         simplified mnemonics used for setting PPC750-specific special
 230         purpose registers.
 231
 232 2001-05-12  H.J. Lu  <hjl@gnu.org>
 233
 234         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 235         `rm'.
 236
 237 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 238
 239         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 240         register to r/w.  Formatting fixes throughout file.
 241
 242 2001-05-12  Alan Modra  <amodra@one.net.au>
 243
 244         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 245         movq operands.
 246         (twobyte_has_modrm): Update table.
 247         (need_modrm): Give it file scope.
 248         (MODRM_CHECK): Define.
 249         (dofloat): Use MODRM_CHECK.
 250         (OP_E): Likewise.
 251         (OP_EM): Likewise.
 252         (OP_EX): Likewise.
 253
 254 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 255
 256         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 257         even at end of a section.
 258         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 259         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 260
 261 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 262
 263         * disassemble.c (disassembler_usage): Remove unused attribute.
 264
 265 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 266
 267         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 268
 269 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 270
 271         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 272         assume incoming buffer already has the base insn loaded.  Handle
 273         smaller-than-base instructions for variable-length case.
 274
 275 2001-05-04  Alan Modra  <amodra@one.net.au>
 276
 277         * i386-dis.c (Ev, Ed): Remove duplicate define.
 278         (Gd): Define.
 279         (XS): Define.
 280         (OP_XS): New function.
 281         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 282         movmskp operands.
 283         (dis386_twobyte_intel): Likewise.
 284         (prefix_user_table): Use MS for maskmovq operand.
 285
 286 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 287
 288         * Makefile.am: Add OpenRISC target.
 289         * Makefile.in: Regenerated.
 290
 291         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 292
 293         * configure.in (bfd_openrisc_arch): Add target.
 294         * configure: Regenerated.
 295
 296         * openrisc-asm.c: New file.
 297         * openrisc-desc.c: Likewise.
 298         * openrisc-desc.h: Likewise.
 299         * openrisc-dis.c: Likewise.
 300         * openrisc-ibld.c: Likewise.
 301         * openrisc-opc.c: Likewise.
 302         * openrisc-opc.h: Likewise.
 303
 304 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 305
 306         * z8k-dis.c: add names of control registers (ctrl_names);
 307         (seg_length): provides instruction length fixup for segmented
 308         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 309         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 310         (unparse_intr): handle CLASS_PR, print addresses without '#'
 311         * z8k-opc.h: re-created with new z8kgen
 312         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 313         entries for ldctl/ldctlb instruction
 314
 315 2001-04-06  Andreas Jaeger  <aj@suse.de>
 316
 317         * i386-dis.c: Add ffreep instruction.
 318
 319 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 320
 321         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 322
 323 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 324
 325         * i386-dis.c (PREGRP25): Define.
 326         (dis386_twobyte_att): Use here in place of "movntq" entry.
 327         (dis386_twobyte_intel): Likewise.
 328         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 329         (PREGRP26): Define.
 330         (dis386_twobyte_att): Use here.
 331         (dis386_twobyte_intel): Likewise.
 332         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 333         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 334         (prefix_user_table): Cosmetic changes to "bad" entries.
 335
 336 2001-03-23  Nick Clifton  <nickc@redhat.com>
 337
 338         * mips-opc.c: Remove extraneous whitespace.
 339         * mips-dis.c: Remove extraneous whitespace.
 340
 341 2001-03-22  Ben Elliston  <bje@redhat.com>
 342
 343         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 344         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 345         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 346         to allay a compiler warning.
 347
 348 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 349
 350         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 351         (dis386_twobyte_intel): Likewise.
 352         (twobyte_has_modrm): Set entry for paddq, psubq.
 353
 354 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 355
 356         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 357         determination via CGEN_COMPUTE_MACH.
 358         * fr30-desc.c: Regenerate.
 359         * fr30-dis.c: Regenerate.
 360         * fr30-opc.h: Regenerate.
 361         * m32r-desc.c: Regenerate.
 362         * m32r-dis.c: Regenerate.
 363         * m32r-opc.h: Regenerate.
 364         * m32r-opinst.c: Regenerate.
 365
 366 2001-03-20  H.J. Lu  <hjl@gnu.org>
 367
 368         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 369         * configure: Rebuild.
 370
 371 2001-03-19  Jim Wilson  <wilson@redhat.com>
 372
 373         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 374         notestr if larger than xsect.
 375         (in_class): Handle format M5.
 376         * ia64-asmtab.c: Regnerate.
 377
 378 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 379
 380         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 381         has more than one byte left to read.
 382
 383 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 384
 385         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 386         * s390-opc.txt: Add new opcodes.
 387
 388 2001-03-06  Nick Clifton  <nickc@redhat.com>
 389
 390         * arm-dis.c (print_insn_thumb): Compute destination address
 391         of BLX(1) instruction by taking bit 1 from PC and not from bit
 392         0 of the offset.
 393
 394 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 395
 396         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 397         so command line switches will work.
 398
 399 2001-03-05  Dave Brolley  <brolley@redhat.com>
 400
 401         * fr30-asm.c: Regenerate.
 402         * fr30-desc.c: Regenerate.
 403         * fr30-desc.h: Regenerate.
 404         * fr30-dis.c: Regenerate.
 405         * fr30-ibld.c: Regenerate.
 406         * fr30-opc.c: Regenerate.
 407         * fr30-opc.h: Regenerate.
 408         * m32r-asm.c: Regenerate.
 409         * m32r-desc.c: Regenerate.
 410         * m32r-desc.h: Regenerate.
 411         * m32r-dis.c: Regenerate.
 412         * m32r-ibld.c: Regenerate.
 413         * m32r-opc.c: Regenerate.
 414         * m32r-opc.h: Regenerate.
 415         * m32r-opinst.c: Regenerate.
 416
 417 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 418
 419         * m68k-opc.c: fix cpushl according to Motorola. Enable
 420         bunch of instructions for Coldfire 5407 and add all new.
 421
 422 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 423
 424         * configure.in (BFD_VERSION): Do without grep.
 425         * configure: Regenerate.
 426         * Makefile.am: Run "make dep-am".
 427         * Makefile.in: Regenerate.
 428
 429 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 430
 431         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 432         * ia64-asmtab.c: Regenerate.
 433
 434 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 435
 436         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 437         separate variants: one for IMM22 and the other for IMM14.
 438         * ia64-asmtab.c: Regenerate.
 439
 440 2001-02-21  Greg McGary  <greg@mcgary.org>
 441
 442         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 443
 444 2001-02-20  H.J. Lu  <hjl@gnu.org>
 445
 446         * Makefile.am (ia64-ic.tbl): Remove the target.
 447         (ia64-raw.tbl): Likewise.
 448         (ia64-waw.tbl): Likewise.
 449         (ia64-war.tbl): Likewise.
 450         (ia64-asmtab.c): Generate it in the source directory.
 451         * Makefile.in: Regenerated.
 452
 453 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 454
 455         * Makefile.am: Add PDP-11 target.
 456         * configure.in: Likewise.
 457         * disassemble.c: Likewise.
 458         * pdp11-dis.c: New file.
 459         * pdp11-opc.c: New file.
 460
 461 2001-02-14  Jim Wilson  <wilson@redhat.com>
 462
 463         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 464         * ia64-asmtab.c: Regenerate.
 465
 466 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 467
 468         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 469         instructions.
 470         (putop): Handle 'Y'
 471
 472 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 473
 474         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 475         the following instruction not of the jump itself for the jump
 476         target.
 477         (print_mips16_insn_arg): Likewise.
 478
 479 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 480
 481         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 482         directory.
 483         * Makefile.in: Regenerate.
 484
 485 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 486
 487         * Makefile.am: Add linux target for S/390.
 488         * Makefile.in: Likewise.
 489         * configure.in: Likewise.
 490         * disassemble.c: Likewise.
 491         * s390-dis.c: New file.
 492         * s390-mkopc.c: New file.
 493         * s390-opc.c: New file.
 494         * s390-opc.txt: New file.
 495
 496 2001-02-05  Jim Wilson  <wilson@redhat.com>
 497
 498         * ia64-asmtab.c: Revert 2000-12-16 change.
 499
 500 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 501
 502         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 503         * m32r-desc.h: Regenerate.
 504
 505 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 506
 507         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 508         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 509
 510 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 511
 512         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 513
 514 2001-01-13  Nick Clifton  <nickc@redhat.com>
 515
 516         * disassemble.c: Remove spurious white space.
 517
 518 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 519
 520         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 521         templates.
 522
 523 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 524
 525         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 526         * Makefile.am (C_FILES): Add arc-ext.c.
 527         (ALL_MACHINES) Add arc-ext.lo.
 528         (INCLUDES) Add opcode directory to list.
 529         New dependency entry for arc-ext.lo.
 530         * disassemble.c (disassembler): Correct call to
 531         arc_get_disassembler.
 532         * arc-opc.c: New update for ARC, including full base
 533         instructions for ARC variants.
 534         * arc-dis.h, arc-dis.c: New update for ARC, including
 535         extensibility functionality.
 536         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 537
 538 2001-01-10  Jan Hubicka  <jh@suse.cz>
 539
 540         * i386-dis.c (PREGRP15 - PREGRP24): New.
 541         (dis386_twobyt): Add SSE2 instructions.
 542         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
 543         (twobyte_uses_f3_prefix): ... this one.
 544         (grps): Add SSE instructions.
 545         (prefix_user_table): Add two new slots; add SSE2 instructions.
 546         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
 547         Handle the REPNZ and Data16 prefixes as well; do proper lookup
 548         to prefix_user_table.
 549         (OP_E): Accept mfence and lfence as well.
 550         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
 551         (OP_XMM): Support REX extensions.
 552         (OP_EM): Likewise.
 553         (OP_EX): Likewise.
 554
 555 2001-01-09  Nick Clifton  <nickc@redhat.com>
 556
 557         * arm-dis.c (print_insn): Set pc to zero for instructions with
 558         a reloc associated with them.
 559
 560 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
 561
 562         * cgen-asm.in (parse_insn_normal): Changed syn to be
 563         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
 564         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
 565         to '\0' to use 0 instead.
 566         * cgen-dis.in (print_insn_normal): Ditto.
 567         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
 568
 569 2001-01-05  Jan Hubicka  <jh@suse.cz>
 570
 571         * i386-dis.c: Add x86_64 support.
 572         (rex): New static variable.
 573         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
 574         (USED_REX): New macro.
 575         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
 576         (OP_I64, OP_OFF64, OP_IMREG): New functions.
 577         (OP_REG, OP_OFF): Declare.
 578         (get64, get32, get32s): New functions.
 579         (r??_reg): New constants.
 580         (dis386_att): Change templates of instruction implicitly promoted
 581         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
 582         (grps): Likewise.
 583         (dis386_intel): Likewise.
 584         (dixx86_64_att): New table based on dis386_att.
 585         (dixx86_64_intel): New table based on dis386_intel.
 586         (names64, names8rex): New global variable.
 587         (names32, names16): Add extended registers.
 588         (prefix_user_t): Recognize rex prefixes.
 589         (prefix_name): Print REX prefixes nicely.
 590         (op_riprel): New global variable.
 591         (start_pc): Set type to bfd_vma.
 592         (print_insn_i386): Detect the 64bit mode and use proper table;
 593         move ckprefix after initializing the buffer; output unused rex prefixes;
 594         output information about target of RIP relative addresses.
 595         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
 596         (print_operand_value): New function.
 597         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
 598         REX prefix and new modes.
 599         (get64, get32s): New.
 600         (get32): Return bfd_signed_vma type.
 601         (set_op): Initialize the op_riprel.
 602         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
 603
 604 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
 605
 606          cgen-dis.in (read_insn): Use bfd_get_bits()
 607
 608 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
 609
 610         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
 611         (hash_insn_list): Likewise
 612         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
 613         (extract_1): Use bfd_get_bits().
 614         (extract_normal): Apply sign extension to both extraction
 615         methods.
 616         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
 617         (cgen_put_insn_value): Use bfd_put_bits()
 618
 619 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
 620
 621         * cgen-asm.in (parse_insn_normal): Print better error message for
 622         instructions with missing operands.
 623
 624 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
 625
 626         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
 627
 628 2000-12-16  Nick Clifton  <nickc@redhat.com>
 629
 630         * Makefile.in: Regenerate.
 631         * aclocal.m4: Regenerate.
 632         * config.in: Regenerate.
 633         * configure.in: Add spacing.
 634         * configure: Regenerate.
 635         * ia64-asmtab.c: Regenerate.
 636         * po/opcodes.pot: Regenerate.
 637
 638 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
 639
 640         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
 641         error messages over later parse-time ones.
 642
 643 2000-12-12  Jim Wilson  <wilson@redhat.com>
 644
 645         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
 646         argument.
 647         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
 648         (print_dependency_table): Print NULL if semantics field not set.
 649         (insert_opcode_dependencies): Mark cmp parameter as unused.
 650         (print_main_table): Use fprintf_vma to print long long fields.
 651         (main): Mark argv paramter as unused.  Convert to old style definition.
 652         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
 653         * ia64-asmtab.c: Regnerate.
 654
 655 2000-12-09  Nick Clifton  <nickc@redhat.com>
 656
 657         * m32r-dis.c (print_insn): Prevent re-read of instruction from
 658         wrong address.
 659
 660         * fr30-dis.c: Regenerate.
 661
 662 2000-12-08  Peter Targett  <peter.targett@arccores.com>
 663
 664         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 665         * Makefile.am (C_FILES): Add arc-ext.c.
 666         (ALL_MACHINES) Add arc-ext.lo.
 667         (INCLUDES) Add opcode directory to list.
 668         New dependency entry for arc-ext.lo.
 669         * disassemble.c (disassembler): Correct call to
 670         arc_get_disassembler.
 671         * arc-opc.c: New update for ARC, including full base
 672         instructions for ARC variants.
 673         * arc-dis.h, arc-dis.c: New update for ARC, including
 674         extensibility functionality.
 675         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 676
 677 2000-12-03  Chris Demetriou   cgd@sibyte.com
 678
 679         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
 680         MOD_HILO, and MOD_LO macros.
 681
 682         * mips-opc.c (M1, M2): Delete.
 683         (mips_builtin_opcodes): Remove all uses of M1.
 684
 685         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
 686         instructions take "G" format second operands and use the
 687         correct flags.
 688         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
 689         match.
 690         Delete "sel" code operands from mfc1 and mtc1.
 691         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
 692         for dm[ft]c[023].
 693
 694 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
 695             Chris Demetriou   cgd@sibyte.com
 696
 697         * mips-opc.c (mips_builtin_opcodes): Finish additions
 698         for MIPS32 support, and clean up existing entries for
 699         aesthetics, consistency with the MIPS32 ISA, and
 700         with consistency the rest of the table.
 701
 702 2000-12-01  Nick Clifton  <nickc@redhat.com>
 703
 704         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
 705         field.
 706
 707 2000-12-01  Chris Demetriou <cgd@sibyte.com>
 708
 709         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
 710         specifiers.  Update 'B' for new constant names, and remove
 711         'm'.
 712         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
 713         near the top of the array, so they are disassembled properly.
 714         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
 715         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
 716         specifier.  Add 'H' format specifier variants for "mfc1,"
 717         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
 718         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
 719         "wait" variant which uses 'J' operand specifier.
 720
 721         * mips-dis.c (set_mips_isa_type): Update to use
 722         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
 723         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
 724         * mips-opc.c (I32): New constant for instructions added in
 725         MIPS32.
 726         (P4): Delete.
 727         (mips_builtin_opcodes) Replace all uses of P4 with I32.
 728
 729         * mips-dis.c (set_mips_isa_type): Add cases for
 730         bfd_mach_mips5 and bfd_mach_mips64.
 731         * mips-opc.c (I64): New definitions.
 732
 733         * mips-dis.c (set_mips_isa_type): Add case for
 734         bfd_mach_mips_sb1.
 735
 736 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
 737
 738         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
 739         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
 740         Initialize variable dc to NULL.
 741         (print_insn_shx): Remove unused label d_reg_n.
 742
 743 2000-11-24  Nick Clifton  <nickc@redhat.com>
 744
 745         * arm-opc.h: Add new opcode formatting parameter 'B'.
 746         (arm_opcodes): Add XScale, v5, and v5te instructions.
 747         (thumb_opcodes): Add v5t instructions.
 748
 749         * arm-dis.c (print_insn_arm): Handle new 'B' format
 750         parameter.
 751         (print_insn_thumb): Decode BLX(1) instruction.
 752
 753 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
 754
 755         * mips-opc.c: Fix file header comment.
 756
 757 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
 758
 759         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
 760         print_insn_cris_with_register_prefix.
 761
 762 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
 763
 764         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
 765
 766 2000-11-07  Matthew Green  <mrg@redhat.com>
 767
 768         * cgen-dis.in (print_insn): All insns which can fit into insn_value
 769         must be loaded there in their entirety.
 770
 771 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
 772
 773         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
 774         (compute_arch_mask): Add v8plusb and v9b machines.
 775         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
 776         * sparc-opc.c: Support for Cheetah instruction set.
 777         (prefetch_table): Add #invalidate.
 778
 779 2000-10-16  Nick Clifton  <nickc@redhat.com>
 780
 781         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
 782
 783 2000-10-06  Dave Brolley  <brolley@redhat.com>
 784
 785         * fr30-desc.h: Regenerate.
 786         * m32r-desc.h: Regenerate.
 787         * m32r-ibld.c: Regenerate.
 788
 789 2000-10-05  Jim Wilson  <wilson@redhat.com>
 790
 791         * ia64-ic.tbl: Update from Intel.
 792         * ia64-asmtab.c: Regenerate.
 793
 794 2000-10-04  Kazu Hirata  <kazu@hxi.com>
 795
 796         * ia64-gen.c: Convert C++-style comments to C-style comments.
 797         * tic54x-dis.c: Likewise.
 798
 799 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
 800
 801         Changes to add dollar prefix to registers for files where user symbols
 802         don't have a leading underscore.  Fix formatting.
 803         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
 804         (format_reg): Add parameter with_reg_prefix.  All callers changed.
 805         (print_with_operands): Ditto.
 806         (print_insn_cris_generic): Renamed from print_insn_cris, add
 807         parameter with_reg_prefix.
 808         (print_insn_cris_with_register_prefix,
 809         print_insn_cris_without_register_prefix, cris_get_disassembler):
 810         New.
 811         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
 812
 813 2000-09-22  Jim Wilson  <wilson@redhat.com>
 814
 815         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
 816         gt, ge, ngt, and nge.
 817         * ia64-asmtab.c: Regenerate.
 818
 819         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
 820         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
 821         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
 822         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
 823         * ia64-asmtab.c: Regnerate.
 824
 825 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
 826
 827         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
 828         Add mfc0 and mtc0 with sub-selection values.
 829         Add clo and clz opcodes.
 830         Add msub and msubu instructions for MIPS32.
 831         Add madd/maddu aliases for mad/madu for MIPS32.
 832         Support wait, deret, eret, movn, pref for MIPS32.
 833         Support tlbp, tlbr, tlbwi, tlbwr.
 834         (P4): New define.
 835
 836         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
 837         (print_insn_arg): Handle 'H' args.
 838         (set_mips_isa_type): Recognize 4K.
 839         Use CPU_* defines instead of hardcoded numbers.
 840
 841 2000-09-11  Catherine Moore <clm@redhat.com>
 842
 843         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
 844         (d30v_format_tab): Use Rb2 for modinc and moddec.
 845
 846 2000-09-07  Catherine Moore  <clm@redhat.com>
 847
 848         * d30v-opc.c (d30v_format_tab): Use format Ra for
 849         modinc and moddec.
 850
 851 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
 852
 853         * configure: Rebuilt with new libtool.m4.
 854
 855 2000-09-05  Nick Clifton  <nickc@redhat.com>
 856
 857         * configure: Regenerate.
 858         * po/opcodes.pot: Regenerate.
 859
 860 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
 861
 862         * acinclude.m4: Include libtool and gettext macros from the
 863         top level.
 864         * aclocal.m4, configure: Rebuilt.
 865
 866 2000-08-30  Kazu Hirata  <kazu@hxi.com>
 867
 868         * tic80-dis.c: Fix formatting.
 869
 870 2000-08-29  Kazu Hirata  <kazu@hxi.com>
 871
 872         * w65-dis.c: Fix formatting.
 873
 874 2000-08-28  Mark Hatle  <mhatle@mvista.com>
 875
 876         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
 877         (powerpc_opcodes): Add table entries for PPC 405 instructions.
 878         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
 879         instructions.  Added extended mnemonic mftbl as defined in the
 880         405GP manual for all PPCs.
 881
 882 2000-08-28  Jim Wilson  <wilson@redhat.com>
 883
 884         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
 885         call.  Change last goto to use failed instead of done.
 886
 887 2000-08-28  Dave Brolley  <brolley@redhat.com>
 888
 889         * cgen-ibld.in (cgen_put_insn_int_value): New function.
 890         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 891         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
 892         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 893         * cgen-dis.in (read_insn): New static function.
 894         (print_insn): Use read_insn to read the insn into the buffer and set
 895         up for disassembly.
 896         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
 897         in the buffer.
 898         * fr30-asm.c: Regenerated.
 899         * fr30-desc.c: Regenerated.
 900         * fr30-desc.h: Regenerated.
 901         * fr30-dis.c: Regenerated.
 902         * fr30-ibld.c: Regenerated.
 903         * fr30-opc.c: Regenerated.
 904         * fr30-opc.h: Regenerated.
 905         * m32r-asm.c: Regenerated.
 906         * m32r-desc.c: Regenerated.
 907         * m32r-desc.h: Regenerated.
 908         * m32r-dis.c: Regenerated.
 909         * m32r-ibld.c: Regenerated.
 910         * m32r-opc.c: Regenerated.
 911
 912 2000-08-28  Kazu Hirata  <kazu@hxi.com>
 913
 914         * tic30-dis.c: Fix formatting.
 915
 916 2000-08-27  Kazu Hirata  <kazu@hxi.com>
 917
 918         * sh-dis.c: Fix formatting.
 919
 920 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
 921
 922         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
 923
 924 2000-08-24  Kazu Hirata  <kazu@hxi.com>
 925
 926         * z8k-dis.c: Fix formatting.
 927
 928 2000-08-16  Jim Wilson  <wilson@redhat.com>
 929
 930         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
 931         break, mov-immediate, nop.
 932         * ia64-opc-f.c: Delete fpsub instructions.
 933         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
 934         address operand.  Rewrite using macros to avoid long lines.
 935         * ia64-opc.h (POSTINC): Define.
 936         * ia64-asmtab.c: Regenerate.
 937
 938 2000-08-15  Jim Wilson  <wilson@redhat.com>
 939
 940         * ia64-ic.tbl: Add missing entries.
 941
 942 2000-08-08  Jason Eckhardt  <jle@redhat.com>
 943
 944         * i860-dis.c (print_br_address): Change third argument from int
 945         to long.
 946
 947 2000-08-07  Richard Henderson  <rth@redhat.com>
 948
 949         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
 950         for MLI templates.  Handle IA64_OPND_TGT64.
 951
 952 2000-08-04  Ben Elliston  <bje@redhat.com>
 953
 954         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
 955         * cgen.sh: Likewise.
 956
 957 2000-08-02  Jim Wilson  <wilson@redhat.com>
 958
 959         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
 960
 961 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
 962
 963         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
 964         Change return type from void to int.  Check the combination
 965         of operands, return 1 if valid.  Fix to avoid BUF overflow.
 966         Report undefined combinations of operands in COMMENT.
 967         Report internal errors to stderr.  Output the adiw/sbiw
 968         constant operand in both decimal and hex.
 969         (print_insn_avr): Disassemble ldd/std with displacement of 0
 970         as ld/st.  Check avr_operand () return value, handle invalid
 971         combinations of operands like unknown opcodes.
 972
 973 2000-07-28  Ben Elliston  <bje@redhat.com>
 974
 975         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
 976         (run-cgen, stamp-m32r, stamp-fr30): New targets.
 977         * Makefile.in: Regenerate.
 978         * configure.in: Add --enable-cgen-maint option.
 979         * configure: Regenerate.
 980
 981 2000-07-26  Dave Brolley  <brolley@redhat.com>
 982
 983         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
 984         (cgen_hw_lookup_by_num): Ditto.
 985         (cgen_operand_lookup_by_name): Ditto.
 986         (print_address): Ditto.
 987         (print_keyword): Ditto.
 988         * cgen-dis.c (hash_insn_array): Mark unused parameters with
 989         ATTRIBUTE_UNUSED.
 990         * cgen-asm.c (hash_insn_array): Mark unused parameters with
 991         ATTRIBUTE_UNUSED.
 992         (cgen_parse_keyword): Ditto.
 993
 994 2000-07-22  Jason Eckhardt  <jle@redhat.com>
 995
 996         * i860-dis.c: New file.
 997         (print_insn_i860): New function.
 998         (print_br_address): New function.
 999         (sign_extend): New function.
1000         (BITWISE_OP): New macro.
1001         (I860_REG_PREFIX): New macro.
1002         (grnames, frnames, crnames): New structures.
1003
1004         * disassemble.c (ARCH_i860): Define.
1005         (disassembler): Add check for bfd_arch_i860 to set disassemble
1006         function to print_insn_i860.
1007
1008         * Makefile.in (CFILES): Added i860-dis.c.
1009         (ALL_MACHINES): Added i860-dis.lo.
1010         (i860-dis.lo): New dependences.
1011
1012         * configure.in: New bits for bfd_i860_arch.
1013
1014         * configure: Regenerated.
1015
1016 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1017
1018         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1019         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1020         (cris-dis.lo, cris-opc.lo): New rules.
1021         * Makefile.in: Rebuild.
1022         * configure.in (bfd_cris_arch): New target.
1023         * configure: Rebuild.
1024         * disassemble.c (ARCH_cris): Define.
1025         (disassembler): Support ARCH_cris.
1026         * cris-dis.c, cris-opc.c: New files.
1027         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1028
1029 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1030
1031         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1032         Reported by Bill Clarke <llib@computer.org>.
1033
1034 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1035
1036         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1037         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1038
1039 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1040
1041         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1042         fput_const, extract_3, extract_5_load, extract_5_store,
1043         extract_5r_store, extract_5R_store, extract_10U_store,
1044         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1045         extract_12, extract_17, extract_22): Prototype.
1046         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1047         shadowing outer block.
1048         (GET_BIT): Define.
1049
1050 2000-07-05  DJ Delorie  <dj@redhat.com>
1051
1052         * MAINTAINERS: new
1053
1054 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1055
1056         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1057
1058 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1059
1060         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1061         marked for translation (exception from the usual coding style).
1062         (print_insn_avr): Initialize insn2 to avoid warnings.
1063
1064 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1065
1066         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1067         * h8500-dis.c: Fix formatting.
1068
1069 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1070
1071         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1072         (CLEANFILES): Add DEPA.
1073         * Makefile.in: Regenerate.
1074
1075 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1076
1077         * arm-dis.c (regnames): Add an additional register set to match
1078         the set used by GCC.  Make it the default.
1079
1080 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1081
1082         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1083         find one.
1084         * Makefile.in: Regenerate.
1085
1086 2000-06-20  H.J. Lu  <hjl@gnu.org>
1087
1088         * Makefile.am: Rebuild dependency.
1089         * Makefile.in: Rebuild.
1090
1091 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1092
1093         * Makefile.in, configure: regenerate
1094         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1095         ARCH_m68hc11.
1096         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1097         New functions.
1098         * configure.in: Recognize m68hc12 and m68hc11.
1099         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1100         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1101         and opcode generation for m68hc11 and m68hc12.
1102
1103 2000-06-16  Nick Duffek  <nsd@redhat.com>
1104
1105         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1106         bfd_mach_ppc_620 instead of 620.
1107
1108 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1109
1110         * h8300-dis.c: Fix formatting.
1111         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1112         correctly.
1113
1114 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1115
1116         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1117
1118 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1119
1120         * avr-dis.c: completely rewritten.
1121
1122 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1123
1124         * h8300-dis.c: Follow the GNU coding style.
1125         (bfd_h8_disassemble) Fix a typo.
1126
1127 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1128
1129         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1130         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1131         correctly.  Fix a typo.
1132
1133 2000-05-31  Nick Clifton  <nickc@redhat.com>
1134
1135         * opintl.h (_(String)): Explain why dgettext is used instead of
1136         gettext.
1137
1138 2000-05-30  Nick Clifton  <nickc@redhat.com>
1139
1140         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1141         bindtextdomain): Replace defines with those from intl/libgettext.h
1142         to quieten gcc warnings.
1143
1144 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1145
1146         * Makefile.am: Update dependencies with "make dep-am"
1147         * Makefile.in: Regenerate.
1148
1149 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1150
1151         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1152         sign-extending operands.
1153
1154 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1155
1156         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1157         except brf's.
1158
1159 2000-05-21  Nick Clifton  <nickc@redhat.com>
1160
1161         * Makefile.am (LIBIBERTY): Define.
1162
1163 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1164
1165         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1166         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1167         (reg_names): Rename to std_reg_names. Change it to a char **
1168         static variable.
1169         (std_reg_names): New name for reg_names.
1170         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1171         default.
1172
1173 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1174
1175         * fr30-desc.h: Partially regenerated to account for changed
1176         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1177         * m32r-desc.h: Ditto.
1178
1179 2000-05-15  Nick Clifton  <nickc@redhat.com>
1180
1181         * arm-opc.h: Use upper case for flasg in MSR and MRS
1182         instructions.  Allow any bit to be set in the field_mask of
1183         the MSR instruction.
1184
1185         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1186         field_mask of an MSR instruction.
1187
1188 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1189
1190         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1191         instructions changed to ldrsb/ldrsh.
1192
1193 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1194
1195         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1196         target addresses for 'jal' and 'j'.
1197
1198 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1199
1200         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1201         also available in common mode when powerpc syntax is being used.
1202
1203 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1204
1205         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1206         (dummy_print_address): Ditto.
1207
1208 2000-05-04  Timothy Wall  <twall@redhat.com>
1209
1210         * tic54x-opc.c: New.
1211         * tic54x-dis.c: New.
1212         * disassemble.c (disassembler): Add ARCH_tic54x.
1213         * configure.in: Added tic54x target.
1214         * configure: Ditto.
1215         * Makefile.am: Add tic54x dependencies.
1216         * Makefile.in: Ditto.
1217
1218 2000-05-03  J.T. Conklin  <jtc@redback.com>
1219
1220         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1221         vector unit operands.
1222         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1223         unit instruction formats.
1224         (PPCVEC): New macro, mask for vector instructions.
1225         (powerpc_operands): Add table entries for above operand types.
1226         (powerpc_opcodes): Add table entries for vector instructions.
1227
1228         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1229         (print_insn_little_powerpc): Likewise.
1230         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1231
1232 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1233
1234         * configure.in: Add bfd_powerpc_64_arch.
1235         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1236         64 bit code.
1237
1238 2000-04-24  Nick Clifton  <nickc@redhat.com>
1239
1240         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1241         field.
1242
1243 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1244
1245         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1246         FMUL instruction.
1247         (reg_fmul_r): New. Extract source register from FMUL instruction.
1248         (reg_muls_d): New. Extract destination register from MULS instruction.
1249         (reg_muls_r): New. Extract source register from MULS instruction.
1250         (reg_movw_d): New. Extract destination register from MOVW instruction.
1251         (reg_movw_r): New. Extract source register from MOVW instruction.
1252         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1253         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1254
1255 2000-04-22  Timothy Wall  <twall@redhat.com>
1256
1257         * ia64-gen.c (general): Add an ordered table of primary
1258         opcode names, as well as priority fields to disassembly data
1259         structures to enforce a preferred disassembly format based on the
1260         ordering of the opcode tables.
1261         (load_insn_classes): Show a useful message if IC tables are missing.
1262         (load_depfile): Ditto.
1263         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1264         distinguish preferred disassembly.
1265         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1266         format.  Fix incorrect flag on fma.s/fma.s.s0.
1267         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1268         the highest priority.
1269         * ia64-opc-b.c: Use more abbreviations.
1270         * ia64-asmtab.c: Regenerate.
1271
1272 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1273
1274         * hppa-dis.c (extract_16): New function.
1275         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1276         new operand types l,y,&,fe,fE,fx.
1277
1278 2000-04-21  Richard Henderson  <rth@redhat.com>
1279             David Mosberger  <davidm@hpl.hp.com>
1280             Timothy Wall <twall@redhat.com>
1281             Bob Manson  <manson@charmed.cygnus.com>
1282             Jim Wilson  <wilson@redhat.com>
1283
1284         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1285         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1286         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1287         ia64-asmtab.c.
1288         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1289         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1290         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1291         * Makefile.in: Rebuild.
1292         * configure Rebuild.
1293         * configure.in (bfd_ia64_arch): New target.
1294         * disassemble.c (ARCH_ia64): Define.
1295         (disassembler): Support ARCH_ia64.
1296         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1297         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1298         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1299         ia64-war.tbl, ia64-waw.tbl: New files.
1300
1301 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1302
1303         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1304         (disassemble): Use them.
1305
1306 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1307
1308         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1309         * Makefile.am: Update dependencies.
1310         * Makefile.in: Regenerate.
1311
1312 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1313
1314         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1315         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1316         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1317         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1318         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1319         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1320         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1321         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1322         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1323         ansidecl.h as sysdep.h includes it.
1324
1325 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1326
1327         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1328         --enable-build-warnings option.
1329         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1330         * Makefile.in, configure: Re-generate.
1331
1332 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1333
1334         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1335         stc GBR,@-<REG_N> is available for arch_sh1_up.
1336         Group parallel processing insn with identical mnemonics together.
1337         Make three-operand psha / pshl come first.
1338
1339 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1340
1341         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1342         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1343         (sh_arg_type): Add A_PC.
1344         (sh_table): Update entries using immediates.  Add repeat.
1345         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1346         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1347
1348 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1349
1350         * po/opcodes.pot: Regenerate.
1351
1352         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1353         (DEP): Quote when passing vars to sub-make.  Add warning message
1354         to end.
1355         (DEP1): Rewrite for "gcc -MM".
1356         (CLEANFILES): Add DEP2.
1357         Update dependencies.
1358         * Makefile.in: Regenerate.
1359
1360 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1361
1362         * avr-dis.c: Syntax cleanup.
1363         (add0fff): Print the pc relative address as a signed number.
1364         (add03f8): Likewise.
1365
1366 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1367
1368         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1369         the parameter ATTRIBUTE_UNUSED.
1370         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1371
1372 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1373
1374         * m10300-opc.c: SP-based offsets are always unsigned.
1375
1376 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1377
1378         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1379         [branch always] instead of "undefined".
1380
1381 2000-03-27  Nick Clifton  <nickc@redhat.com>
1382
1383         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1384         short instructions, from end of list of long instructions.
1385
1386 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1387
1388         * Makefile.am (CFILES): Add avr-dis.c.
1389         (ALL_MACHINES): Add avr-dis.lo.
1390
1391 2000-03-27  Alan Modra  <alan@linuxcare.com>
1392
1393         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1394         truncate integers.
1395         (print_insn_avr): Call function via pointer in K&R compatible way.
1396         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1397         add0fff, add03f8): Convert to old style function declaration and
1398         add prototype.
1399         (avrdis_opcode): Add prototype.
1400
1401 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1402
1403         * avr-dis.c: New file.  AVR disassembler.
1404         * configure.in (bfd_avr_arch): New architecture support.
1405         * disassemble.c: Likewise.
1406         * configure: Regenerate.
1407
1408 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1409
1410         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1411
1412 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1413
1414         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1415         flag to determine if operand is pc-relative.
1416         * d30v-opc.c:
1417         (d30v_format_table):
1418         (REL6S3): Renamed from IMM6S3.
1419         Added flag OPERAND_PCREL.
1420         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1421         added flag OPERAND_PCREL.
1422         (IMM12S3U): Replaced with REL12S3.
1423         (SHORT_D2, LONG_D): Delay target is pc-relative.
1424         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1425         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1426         using the REL* operands.
1427         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1428         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1429         LONG_Db, using REL* operands.
1430         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1431         (d30v_opcode_table): Use new *r formats.
1432
1433 2000-02-28  Nick Clifton  <nickc@redhat.com>
1434
1435         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1436         'signed_overflow_ok_p'.
1437
1438 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1439
1440         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1441         name of the libtool directory.
1442         * Makefile.in: Rebuild.
1443
1444 2000-02-24  Nick Clifton  <nickc@redhat.com>
1445
1446         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1447         (cgen_clear_signed_overflow_ok): New function.
1448         (cgen_signed_overflow_ok_p): New function.
1449
1450 2000-02-23  Andrew Haley  <aph@redhat.com>
1451
1452         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1453         m32r-ibld.c, m32r-opc.h: Rebuild.
1454
1455 2000-02-23  Linas Vepstas <linas@linas.org>
1456
1457         * i370-dis.c, i370-opc.c: New.
1458
1459         * disassemble.c (ARCH_i370): Define.
1460         (disassembler): Handle it.
1461
1462         * Makefile.am: Add support for Linux/IBM 370.
1463         * configure.in: Likewise.
1464
1465         * Makefile.in: Regenerate.
1466         * configure: Likewise.
1467
1468 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1469
1470         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1471         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1472         procedure.
1473
1474 2000-02-22  Andrew Haley  <aph@redhat.com>
1475
1476         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1477         force gp32 to zero.
1478         * mips-opc.c (G6): New define.
1479         (mips_builtin_op): Add "move" definition for -gp32.
1480
1481 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1482
1483         From Grant Erickson <gerickso@Brocade.COM>:
1484         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1485
1486 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1487
1488         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1489         vars to unsigned.
1490
1491 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1492
1493         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1494         (print_insn_ppi): Likewise.
1495         (print_insn_shx): Use info->mach to select appropriate insn set.
1496         Add support for sh-dsp.  Remove FD_REG_N support.
1497         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1498         (sh_arg_type): Likewise.  Remove FD_REG_N.
1499         (sh_dsp_reg_nums): New enum.
1500         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1501         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1502         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1503         (arch_sh3_dsp_up): Likewise.
1504         (sh_opcode_info): New field: arch.
1505         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1506         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1507
1508 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1509
1510         * arm-dis.c: Change flavor name from atpcs-special to
1511         special-atpcs to prevent name conflict in gdb.
1512         (get_arm_regname_num_options, set_arm_regname_option,
1513         get_arm_regnames): New functions.  API to access the several
1514         flavor of register names.  Note: Used by gdb.
1515         (print_insn_thumb): Use the register name entry from the currently
1516         selected flavor for LR and PC.
1517
1518 2000-02-10  Nick Clifton  <nickc@redhat.com>
1519
1520         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1521         classes.
1522         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1523         "mulsh.h" instructions.
1524         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1525         classes.
1526         (print_insn_mcore): Add support for little endian targets.
1527         Add support for MULSH and OPSR classes.
1528
1529 2000-02-07  Nick Clifton  <nickc@redhat.com>
1530
1531         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1532         Previous delat did not take.
1533
1534 2000-02-03  Timothy Wall  <twall@redhat.com>
1535
1536         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
1537         to adjust target address bounds checking and calculate the
1538         appropriate octet offset into data.
1539
1540 2000-01-27  Nick Clifton  <nickc@redhat.com>
1541
1542         * arm-dis.c: (parse_disassembler_option): Rename to
1543         parse_arm_disassembler_option and allow to be exported.
1544
1545         * disassemble.c (disassembler_usage): New function: Print out any
1546         target specific disassembler options.
1547         Call arm_disassembler_options() if the ARM architecture is being
1548         supported.
1549
1550         * arm-dis.c (NUM_ELEM): Define this macro if not already
1551         defined.
1552         (arm_regname): New struct type for ARM register names.
1553         (arm_toggle_regnames): Delete.
1554         (parse_disassembler_option): Use register name structure.
1555         (print_insn): New function: Combines duplicate code found in
1556         print_insn_big_arm and print_insn_little_arm.
1557         (print_insn_big_arm): Call print_insn.
1558         (print_insn_little_arm): Call print_insn.
1559         (print_arm_disassembler_options): Display list of supported,
1560         ARM specific disassembler options.
1561
1562 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
1563
1564         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1565         ARM_STT_16BIT flag as Thumb code symbols.
1566
1567         * arm-dis.c (printf_insn_little_arm): Ditto.
1568
1569 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
1570
1571         * arm-dis.c (printf_insn_thumb): Prevent double dumping
1572         of raw thumb instructions.
1573
1574 2000-01-20  Nick Clifton  <nickc@redhat.com>
1575
1576         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1577
1578 2000-01-03  Nick Clifton  <nickc@cygnus.com>
1579
1580         * arm-dis.c (streq): New macro.
1581         (strneq): New macro.
1582         (force_thumb): ew local variable.
1583         (parse_disassembler_option): New function: Parse a single, ARM
1584         specific disassembler command line switch.
1585         (parse_disassembler_option): Call parse_disassembler_option to
1586         parse individual command line switches.
1587         (print_insn_big_arm): Check force_thumb.
1588         (print_insn_little_arm): Check force_thumb.
1589
1590 For older changes see ChangeLog-9899
1591 \f
1592 Local Variables:
1593 mode: change-log
1594 left-margin: 8
1595 fill-column: 74
1596 version-control: never
1597 End: