1 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
3 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
5 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
7 (OP_J): Remove unnecessary subtraction when 16-bit displacement
11 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
13 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
16 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
18 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
19 from raw register #s to symbolic names to make debugging easier.
22 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
24 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
26 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
28 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
30 * Makefile.am (CGENDIR): Set via configure.
32 (CGENFILES): object.scm renamed to cos.scm.
33 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
34 (stamp-m32r): Pass prefix to run-cgen.
35 * Makefile.in: Regenerate.
36 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
39 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
40 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
41 * configure: Regenerate.
45 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
47 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
49 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
51 * m10300-opc.c: Reorder more instructions so that we do not
52 accidentally match a mn10300 instruction when we really
53 wanted an am33 instruction.
56 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
58 * m10300-dis.c: Only recognize instructions from the currently
60 * m10300-opc.c: Add field indicating the particular variant of
61 the mn10300 each instruction is available on.
63 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
65 * configure.in: For bfd_vax_arch, build vax-dis.lo.
66 * Makefile.am: Rebuild dependencies.
67 (CFILES): Add vax-dis.c.
68 (ALL_MACHINES): Add vax-dis.lo.
69 * aclocal.m4: Rebuild with current libtool.
70 * configure, Makefile.in: Rebuild.
72 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
74 * vax-dis.c: New file, from work by Pauline Middelink
75 <middelin@polyware.iaf.nl>.
76 * disassemble.c (ARCH_vax): Define if ARCH_all.
77 (disassembler): Add case for ARCH_vax.
78 * makefile.vms: Support compilation on vms/vax.
81 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
83 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
84 the DVP_OPERAND_RELOC_11_S4 relocation.
88 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
90 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
92 (disassemble): Correctly handle FMT_D10 instructions.
94 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
95 am33 shift instructions.
97 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
99 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
100 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
102 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
103 (mn10300_opcodes): Reorder so as to try and select opcodes from
104 the core chip when multiple alternatives exist. Change several
105 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
106 "macbu" instructions. Fix typos in a couple DSP instructions too.
109 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
111 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
112 related to sign extension and the size of ints.
114 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
116 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
117 instructions. Support (sp) addressing mode by expanding it into
121 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
123 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
124 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
125 be used as immediate values.
129 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
131 * m10300-opc.c: Support 4 byte DSP instructions.
134 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
136 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
139 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
141 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
144 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
146 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
149 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
151 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
152 found on the mn10300.
155 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
157 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
160 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
162 * mips-dis.c (print_insn_little_mips): Previously, instruction
163 printing references the symbol table to determine whether the
164 instruction resides in a block regular instructions or mips16
165 instructions. However, when the disassembler gets used in other
166 environments where the symbol table is not present, we no longer
167 rely in the symbol table, rather, use the low bit of the
168 instructions address to guess. There should be no change for usage
169 of the disassembler in host based programse, gdb ,objdump.
170 (print_insn_big_mips): ditto.
171 (print_insn_mips): ditto
173 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
175 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
177 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
180 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
181 operands for the am33.
182 (mn10300_opcodes): Add new instructions from the am33.
184 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
186 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
188 * i386-dis.c (index16): Add '%' to register names. Use ','
191 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
193 * i386-dis.c: Don't print opcode suffix when we can figure out the
194 size (and gas can!) by register operands, or from the default
196 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
198 (dis386, dis386_twobyte, grps): Use new suffix macros.
199 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
200 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
201 order of cmps operands to agree with Intel docs. Correct operand
202 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
203 agree with Intel docs.
204 (print_insn_x86): Print orphan fwait before other prefixes.
205 Return correct byte count for orphan fwait with prefixes. Don't
206 print `bound' operands in reverse order.
207 (ckprefix): Stop accumulating prefixes if we get fwait.
208 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
210 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
212 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
213 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
215 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
217 Fix problems when bfd_vma is wider than long.
218 * i386-dis.c: Make op_address and start_pc unsigned.
219 (set_op): Make parameter unsigned.
220 (print_insn_x86): Cast to bfd_vma when passing a value to
222 * ns32k-dis.c (CORE_ADDR): Don't define.
223 (print_insn_ns32k): Change type of addr to bfd_vma. Use
224 bfd_scan_vma to read back address.
225 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
227 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
228 (NEXTULONG): New definition.
229 (print_insn_m68k): Avoid overflow when computing third argument of
231 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
232 Use disp instead of val to store offset values.
233 (print_indexed): Use base_disp instead of word to store base
234 displacement, to avoid overflow.
235 * m10300-dis.c (disassemble): Cast value to long when computing
236 pc-relative address, to get correct sign extension.
238 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
240 * m32r-opc.c: Regenerate.
242 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
244 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
245 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
247 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
249 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
251 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
253 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
255 (OP_DSreg): Rename from OP_DSSI.
256 (OP_ESreg): Rename from OP_ESDI.
257 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
259 (append_seg): Rename from append_prefix.
260 (ptr_reg): New function.
261 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
263 (PREFIX_ADDR): Rename from PREFIX_ADR.
264 (float_reg): Add non-broken opcodes for people who don't want
267 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
269 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
272 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
274 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
276 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
278 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
279 0; produce error message for shifts of size 32 (or 64 for 64-bit
280 shifts), because the hardware doesn't support them.
283 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
285 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
288 * vu0.h (sqc2): Fix opcode.
290 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
294 start-sanitize-vr5400
295 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
297 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
298 Change pinfo to use WR_HILO.
302 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
304 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
305 LONG_2, LONG_2b formats to use this new operand.
308 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
310 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
312 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
314 * sparc-dis.c (print_insn_sparc): big endian instruction / little
318 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
320 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
321 and SHORT_B3b formats to use Rb instead of Ra.
323 Add FLAG_MUL16 to MUL2XH opcode.
325 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
326 to existing 1.1.1 parallelisation prohibition procedure.
329 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
331 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
332 * cgen-dis.in (extract_normal): Likewise.
333 * m32r-asm.c,m32r-dis.c: Regenerate.
336 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
338 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
342 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
344 * mips-opc.c (multu1): Add two operand variant for the r5900.
347 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
349 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
350 with a shift count of 0.
353 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
355 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
357 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
359 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
360 (_print_insn_mips): Likewise.
361 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
365 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
367 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
368 (cgen_hw_lookup_by_num): New function.
371 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
374 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
376 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
378 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
380 * sparc-dis.c (print_insn_sparc): Always fetch instructions
381 as big-endian on SPARClite.
384 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
386 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
388 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
393 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
395 * d30v-opc.c (pre_defined_register): Remove alias for r0.
399 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
401 * mips-opc.c (break): Added 20-bit single-operand break
402 instruction for R5900 only.
405 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
407 * po/Make-in (install-info): New target.
409 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
411 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
412 * configure: Rebuild.
414 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
416 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
417 variety of ISA2 instructions to set bottom ten bits of trap code.
419 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
421 * Makefile.am (config.status): Add explicit target so that
422 config.status depends upon bfd/configure.in.
423 * Makefile.in: Rebuild.
425 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
427 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
428 instructions to set bottom ten bits of break code.
429 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
430 for above optional argument.
432 start-sanitize-cygnus
433 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
435 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
436 * m32r-opc.h: Regenerate.
439 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
441 * makefile.vms: Run dec c with /nodebug.
443 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
445 * Makefile.in: Rebuilt.
446 * Makefile.am: Regenerated dependencies with mkdep.
448 * opintl.h (_): Define as dgettext.
450 start-sanitize-cygnus
451 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
453 * configure.in: Add support for --enable-cgen-maint.
454 * Makefile.am (M32R_DEPS): New variable.
455 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
456 * aclocal.m4: Regenerate.
457 * Makefile.in: Regenerate.
458 * configure: Regenerate.
460 * Makefile.am (CGENFILES): Add minsn.scm.
463 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
465 * cgen-asm.c: Internationalised.
466 start-sanitize-cygnus
467 * cgen-asm.in: Internationalised.
468 * cgen-opc.in: Internationalised.
470 * m32r-asm.c: Internationalised.
471 * m32r-dis.c: Internationalised.
472 * m32r-opc.c: Internationalised.
474 * aclocal.m4: Regenerated.
475 * configure: Regenerated.
476 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
477 * Makefile.in: Rebuild.
478 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
479 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
481 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
483 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
485 * aclocal.m4, configure: Rebuild with current tools.
487 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
489 * opintl.h: New file - contains internationalisation macros used
490 by source files in this directory.
491 * po/: New subdirectory - contains internationalisation files.
492 * po/Make-in: New file - Makefile constructor.
493 * po/POTFILES.in: New file - list of files in opcodes directory
494 that should be scan for internationalisation macros.
495 * po/opcodes.pot: New file - list of internationisation strings
496 found in files mentioned in po/POTFILES.in.
497 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
498 entry. Add intl directory to include paths.
499 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
500 HAVE_STRCPY, HAVE_LC_MESSAGES
501 * configure.in: Add rule to build Makefile in po subdirectory.
502 * Makefile.in: Rebuilt.
503 * aclocal.m4: Rebuilt.
504 * config.in: Rebuilt.
505 * configure: Rebuilt.
506 * alpha-opc.c: Internationalised.
507 * arc-dis.c: Internationalised.
508 * arc-opc.c: Internationalised.
509 * arm-dis.c: Internationalised.
510 * cgen-asm.c: Internationalised.
512 * d30v-dis.c: Internationalised.
514 * dis-buf.c: Internationalised.
516 * dvp-dis.c: Internationalised.
517 * dvp-opc.c: Internationalised.
519 * h8300-dis.c: Internationalised.
520 * h8500-dis.c: Internationalised.
521 * i386-dis.c: Internationalised.
522 * m10200-dis.c: Internationalised.
523 * m10300-dis.c: Internationalised.
524 * m68k-dis.c: Internationalised.
525 * m88k-dis.c: Internationalised.
526 * mips-dis.c: Internationalised.
527 * ns32k-dis.c: Internationalised.
528 * opintl.h: Internationalised.
529 * ppc-opc.c: Internationalised.
530 * sparc-dis.c: Internationalised.
531 * v850-dis.c: Internationalised.
532 * v850-opc.c: Internationalised.
534 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
536 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
537 (asm_hash_table_entries): New variable.
538 (cgen_asm_init): Free asm_hash_table_entries.
539 (hash_insn_array,hash_insn_list): New functions.
540 (build_asm_hash_table): Use them. Hash macro insns as well.
541 (cgen_asm_lookup_insn): Update.
542 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
543 (dis_hash_table_entries): New variable.
544 (cgen_dis_init): Free dis_hash_table_entries.
545 (hash_insn_array,hash_insn_list): New functions.
546 (build_dis_hash_table): Use them. Hash macro insns as well.
547 (cgen_dis_lookup_insn): Update.
548 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
549 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
550 (cgen_macro_insn_count): New function.
551 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
552 All callers updated. Sanity check result of extract fn.
553 (@arch@_cgen_get_insn_operands): Change result type to void.
554 Delete args insn_value, length. New arg fields. All callers updated.
555 (@arch@_cgen_lookup_get_insn_operands): New function.
556 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
558 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
560 * i386-dis.c (OP_DSSI): Print segment override.
563 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
565 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
569 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
571 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
575 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
577 * vu0.h (vlqd, vlqi): Update per revised specs.
581 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
583 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
584 (vif_operands): Update.
585 (vif_get_unpackloc): Delete.
586 (state_vif_unpackloc{,_star_p}): Delete.
587 (dvp_opcode_init_parse): Update.
588 (vif_unpack_len_value): Avoid divide by zero.
592 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
594 * vu0.h: Specs changed for VCALLMSR bit pattern.
595 * mips-dis.c: (print_insn_arg) Matching change.
598 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
600 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
603 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
605 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
606 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
607 * configure.in: Define and substitute WIN32LDFLAGS and
609 * aclocal.m4: Rebuild with new libtool.
610 * configure, Makefile.in: Rebuild.
613 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
615 * vu0.h: Corrected bit pattern for VMAXI opcode.
618 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
620 * m32r-opc.c: Regenerate.
623 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
625 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
626 (dvp_expand_macro): Implement.
627 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
628 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
631 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
633 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
634 before trying to copy it.
635 * Makefile.in: Rebuild.
637 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
639 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
642 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
644 * m32r-opc.c: Fix bit patterns for SAT and SATB.
647 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
649 * ns32k-dis.c (bit_extract_simple): New function to extract bits
650 from an arbitrary valid buffer instead of fetching them on demand
652 (invalid_float): use bit_extract_simple() instead of bit_extract().
655 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
657 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
658 * m32r-opc.h: Add extra control registers.
661 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
663 From H.J. Lu <hjl@gnu.org>:
664 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
667 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
669 * Branched binutils 2.9.
672 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
674 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
675 disassembling last 4 bytes of a section.
678 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
680 Fix some gcc -Wall warnings:
681 * arc-dis.c (print_insn): Add casts to avoid warnings.
682 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
683 * d10v-dis.c (dis_long, dis_2_short): Likewise.
685 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
686 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
687 (parse_bc, parse_vfreg, parse_accdest): Likewise.
688 (parse_ffstreg, parse_vif_mode): Likewise.
690 * m10200-dis.c (disassemble): Likewise.
691 * m10300-dis.c (disassemble): Likewise.
692 * ns32k-dis.c (print_insn_ns32k): Likewise.
693 * ppc-opc.c (insert_ral, insert_ram): Likewise.
694 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
695 * cgen-opc.c (cgen_keyword_search_next): Likewise.
696 * d10v-dis.c (dis_long, dis_2_short): Likewise.
698 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
701 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
702 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
703 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
705 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
707 * tic80-dis.c (print_one_instruction): Likewise.
709 * w65-dis.c (print_operand): Likewise.
710 * z8k-dis.c (fetch_data): Likewise.
711 * a29k-dis.c: Add return type for find_byte_func_type.
712 * arc-opc.c: Include <stdio.h>. Remove declarations of
713 insert_multshift and extract_multshift.
715 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
717 (extract_value): Fully parenthesize expression.
720 * dvp-opc.c: Include <ctype.h>.
721 (print_sdest): Add default case to switch.
723 * h8500-dis.c (print_insn_h8500): Initialize local variables.
724 * h8500-opc.h (h8500_table): Fully bracket initializer.
725 * w65-opc.h (optable): Likewise.
726 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
727 * i386-dis.c (OP_E): Initialize local variables.
728 * m10200-dis.c (print_insn_mn10200): Likewise.
729 * mips-dis.c (print_insn_mips16): Likewise.
730 * sh-dis.c (print_insn_shx): Likewise.
731 * v850-dis.c (print_insn_v850): Likewise.
732 * ns32k-dis.c (print_insn_arg): Declare.
733 (get_displacement, invalid_float): Declare.
734 (list_search, sign_extend, flip_bytes): Declare return type.
735 (get_displacement): Likewise.
736 (print_insn_arg): Likewise. Make d int. Fix sprintf format
738 (print_insn_ns32k): Make i unsigned.
739 (invalid_float): Make static. Declare type of val.
740 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
741 on each for iteration.
742 * tic30-dis.c (get_indirect_operand): Likewise.
743 * z8k-dis.c (print_insn_z8001): Declare return type.
744 (print_insn_z8002): Likewise.
745 (unparse_instr): Fix sprintf format strings.
747 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
749 * mips-opc.c: Add "sync.l" and "sync.p".
752 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
754 * dvp-opc.c (extract_vif_datalen): Rewrite.
755 (vif_insn_len): Perform 0->max+1 conversion for direct length.
757 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
759 * dvp-dis.c (print_insn): Print unpack address in hex.
760 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
761 Don't skip over '*', just record it.
762 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
763 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
764 Don't skip over '*', just record it.
765 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
766 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
767 (vif_opcodes): Likewise.
768 (state_vif_{mpg,unpack}loc_star_p): New static locals.
769 (vif_macros,vif_macro_count): New globals.
770 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
771 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
772 (vif_get_wl_cl): New function.
773 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
776 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
778 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
779 default m68k variant to recognize.
781 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
782 (ctrl, cobr, mem, ea): Likewise.
783 (print_addr): Likewise. Remove cast.
784 (ea): Cast argument of print_addr to bfd_vma.
786 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
788 (cgen_parse_unsigned_integer): Likewise.
789 (cgen_parse_address): Likewise.
791 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
793 * i960-dis.c (ctrl): Add full braces to structure initialization.
794 (cobr, mem, reg): Likewise.
795 (ea): Correct parenthesization in expression.
797 * cgen-asm.c: Include <ctype.h>.
798 (build_asm_hash_table): Remove unused local variable i.
799 (cgen_parse_keyword): Add casts to avoid warnings.
801 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
802 symbol. Fix indentation.
803 (print_insn_little_arm): Likewise.
806 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
808 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
813 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
815 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
820 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
822 * dvp-opc.c (vif_operand_datalen_special): New global.
826 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
828 * vu0.h (vcallms): Use 'O' for call target operand.
829 * mips-dis.c (print_insn_arg): Handle 'O'.
832 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
834 * configure.in: Use AM_DISABLE_SHARED.
835 * aclocal.m4, configure: Rebuild with libtool 1.2.
838 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
840 * mips-dis.c: Change '%' to '#' in r5900 support.
844 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
846 These patches are courtesy of Jonathan Walton and Tony Thompson
847 (athompso@cambridge.arm.com).
849 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
852 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
853 both the offset and the label closest to the destination.
856 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
858 * vu0.h: New file with cop2/vu0 instructions.
859 * mips-opc.c: Include vu0.h.
860 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
862 (print_insn_mips): Do not emit a tab after an instruction if the
863 first arg is an instruction completer (&). If the next arg is an
864 escape character (%), then print the next arg verbatim.
865 * Makefile.am (mips-opc.lo): Depend on vu0.h
869 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
871 * dvp-opc.c (vif_opcodes): Add stcycl.
873 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
875 * dvp-dis.c (print_dma): Change length from 16 to 8.
878 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
880 * m32r-opc.h: Regenerate.
883 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
885 * dvp-opc.c (print_dest1): Print dest spec again.
886 (print_vfreg,print_accdest): Likewise.
887 (vif_unpack_len): Round result up to word boundary.
890 start-sanitize-vr4320
891 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
893 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
895 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
897 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
902 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
904 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
905 (print_insn): Do mask comparison on proper opcode word.
906 Print unsigned values in hex.
907 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
908 (parse_bc): Catch missing dest.
909 (parse_vfreg): Replace atoi call with strtol.
910 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
911 (parse_bcftreg,parse_ffstreg): Handle missing dest.
912 (extract_gif_eop): New function.
913 (gif_operands): Update eop entry.
914 (VGIFOP,VGIFNREGS): Fix calcs.
915 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
916 (gif_regs): Add entry for unused 11 case.
917 (print_gif_regs): Print empty list instead of nothing.
918 (extract_gif_nloop): Fix value calc.
919 (print_gif_nloop): Always print value, even if 0.
920 (insert_vif_wlcl,extract_vif_wlcl): New functions.
921 (vif_operands): Use them for wl,cl fields.
922 (state_vif_wl,state_vif_cl): New static locals.
923 (parse_vif_mode): Handle numeric args.
924 (vif_unpack_len_value,vif_unpack_len): New functions.
925 (vif_insn_len): Call vif_unpack_len.
928 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
930 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
932 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
934 * cgen-asm.in: Move insertion of generated routines to top of file.
935 (insert_normal): Add prototype. Delete `shift' arg.
936 * cgen-dis.in: Move insertion of generated routines to top of file.
937 (extract_normal): Add prototype. Delete `shift' arg.
938 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
939 (print_keyword): Add prototype. Fix type of `attrs' arg.
941 start-sanitize-vr4320
942 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
944 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
945 * mips-opc.c ("mac","dmac") : Added 4320 insns.
948 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
950 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
951 assume that info->symbols is non-empty.
953 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
955 * alpha-opc.c (cvtqs) There is no such thing.
956 (cvttq): Missing most of the /*d variants.
959 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
961 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
963 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
964 (r5900/msub.s): Takes three operands, not four. Fix opcode.
968 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
970 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
971 delayed branches or jumps.
975 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
977 * dvp-opc.c (vif_operands): Add unpack[u] support.
978 (vif_opcodes): Ditto.
979 (*_vif_imrubits): Renamed from *_vif_imrbits.
981 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
983 * dvp-dis.c (print_insn): Handle word number.
984 Handle mips address vs vu address.
985 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
986 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
987 ({insert,extract}_dma_addr): Fix word ofset.
988 ({insert,print}_gif_regs): Fix encode/decode.
991 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
993 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
995 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
996 * tic30-dis.c (print_branch): Likewise.
998 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
999 * dvp-dis.c (dvp_info_mach_type): New function.
1000 (print_insn_dvp): Call it.
1001 (print_vif): Return length of 4 if mpg or direct insn so following
1002 insns get properly disabled.
1003 (print_gif): Fix word order.
1004 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1005 (gif_operands): Fix word order.
1006 (gif_opcodes): Likewise.
1007 ({insert,extract,print}_gif_regs): Likewise.
1008 (gif_regs): Add new register number/name changes.
1009 (dma_opcodes): Add dmarefe insn.
1012 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1014 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1015 saved_symbol code as it is no longer needed.
1017 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1019 * cgen-asm.c: Include symcat.h.
1020 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1022 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1025 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1027 * dvp-opc.c (extra_dma_flags): Fix typos.
1028 (dma_operands): Fix word numbers.
1029 (dma_opcodes): Likewise.
1030 ({insert,extract}_dma_flags): Likewise.
1033 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1035 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1038 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1040 * dvp-dis.c (print_gif): Complete.
1041 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1042 (state_gif_{nregs,regs,nloop}): New static locals.
1043 (*_gif_*): Complete.
1044 (dvp_opcode_init_{parse,print}): Init gif state locals.
1045 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1046 (vif_insn_len): Handle `unpack'.
1047 ({insert,extract}_dma_flags): Complete.
1050 start-sanitize-r5900
1051 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1053 * mips-opc.c (mula.s): Renamed from multa.s.
1056 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1058 * m32r-opc.[ch]: Regenerate.
1061 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1063 * dvp-opc.c (dma_operands): Rewrite.
1064 (dma_operand_{count,addr}): New globals.
1065 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1066 (insert_dma_addr): Insert value into insn.
1067 (extract_dma_addr): Extract value from insn.
1069 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1071 * dvp-dis.c (print_vu): Handle loi insns.
1072 (print_insn): Likewise.
1073 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1074 (vu_operands): Make LDEST1 a FAKE operand.
1075 (parse_dest1): Allow elided argument.
1076 (print_dest1): Don't print the argument.
1078 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1080 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1081 (print_vfreg): Don't print dest spec.
1082 (parse_accdest): Dest spec is optional.
1083 (print_accdest): Don't print dest spec.
1086 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1088 * Makefile.am (CGENFILES): Update.
1089 * Makefile.in: Regenerate.
1090 * cgen-asm.in (insert_normal): Result is error message now.
1091 Validate value to be inserted.
1092 (insert_insn_normal): Result is error message now.
1093 (@arch@_cgen_assemble_insn): Update.
1094 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1095 arguments. Don't perform validation here.
1096 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1098 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1100 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1101 operand instance list.
1102 * m32r-opc.c: Regenerate.
1104 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1106 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1107 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1109 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1111 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1113 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1115 * configure.in: Get the version number from BFD.
1116 * configure: Rebuild.
1118 From H.J. Lu <hjl@gnu.org>:
1119 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1120 * Makefile.in: Rebuild.
1122 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1124 * m32r-opc.c: Regenerate.
1125 * m32r-opc.h: Regenerate.
1127 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1129 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1130 Ignore ALIAS insns if asked to.
1131 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1132 * m32r-opc.c: Regenerate.
1135 * dvp.opc.c: Nicely format opcode tables.
1136 (vu_operands): New element UFLAGS.
1137 (parse_uflags,print_uflags): New functions.
1138 (vu_upper_opcodes): Add UFLAGS to all insns.
1141 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1143 Fix rac to accept only a0:
1144 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1145 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1146 Introduce OPERAND_GPR.
1147 * d10v-dis.c (print_operand): Likewise.
1149 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1151 * cgen-opc.in: New file.
1152 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1153 * Makefile.am (CGENFILES): Add cgen-opc.in.
1154 * Makefile.in: Regenerate.
1156 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1157 (cgen_hw_lookup): Make result const.
1159 * cgen-dis.in (*): Use PTR instead of void *.
1160 (print_insn): Delete unused vars `i', `syntax'.
1162 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1165 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1167 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1168 (vif_opcodes): Update renamed insns.
1169 * dvp-dis.c (*): Likewise.
1172 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1174 * configure, aclocal.m4: Rebuild with new libtool.
1177 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1179 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1180 instructions use a PC relative branch, not absolute.
1183 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1185 * configure.in: Set libtool_enable_shared rather than
1186 libtool_shared. Remove diversion hack.
1187 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1189 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1191 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1192 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1194 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1196 * tic30-dis.c: New file.
1197 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1198 * configure.in: Handle bfd_tic30_arch.
1199 * Makefile.am: Rebuild dependencies.
1200 (CFILES): Add tic30-dis.c
1201 (ALL_MACHINES): Add tic30-dis.lo.
1202 * configure, Makefile.in: Rebuild.
1204 start-sanitize-m32rx
1205 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1207 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1208 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1209 macwhi-a and macwlo-a instructions.
1213 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1215 * dvp-opc.c, fixed encoding of a bunch of instructions to
1216 be consistent with the asmvu assembler (and inconsistent
1217 with the specification).
1219 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1221 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1222 in the opcode table. The pkemscalf instruction must come first.
1224 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1226 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1229 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1231 * m32r-opc.h (HAVE_CPU_M32R): Define.
1234 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1236 * dvp-dis.c, dvp-opc.c: New files.
1237 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1238 * configure: Regenerate.
1239 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1240 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1241 (mips-dis.lo): Compile with @archdefs@.
1242 * Makefile.in: Regenerate.
1243 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1244 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1247 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1249 * v850-opc.c (insertion routines): If both alignment and size is
1250 wrong then report this.
1252 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1254 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1255 Only recognize instructions for the current target_processor.
1257 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1259 * d10v-dis.c (PC_MASK): Correct value.
1260 (print_operand): If there's a reloc, don't calculate the
1261 address because they could be in different sections.
1263 start-sanitize-cygnus
1264 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1266 * cgen.sh: Rewrite to be like simulator's version.
1267 * Makefile.am (cgen): Update call to cgen.sh.
1268 * Makefile.in: Regenerate
1271 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1273 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1274 instruction after the 4650's "mul" instruction; nobody's using the
1275 4010 these days. If object files someday indicate which processor
1276 variant they're intended for, we can do a better job at this.
1278 start-sanitize-r5900
1279 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1281 * mips-opc.c (c.lt.s): Add r5900 variant.
1285 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1287 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1288 table provided entry size. Use CGEN_INSN_MNEMONIC.
1289 (cgen_parse_keyword): Rewrite.
1290 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1291 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1292 * cgen-opc.c: Clean up pass over `struct foo' usage.
1293 (cgen_keyword_lookup_value): Handle "" entry.
1294 (cgen_keyword_add): Likewise.
1295 start-sanitize-cygnus
1296 * Makefile.am: Add cgen support.
1297 * Makefile.in: Regenerate.
1298 * configure.in: Add cgen support.
1299 * configure: Regenerate.
1300 * aclocal.m4: Regenerate.
1301 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1304 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1306 * mips-opc.c: Add FP_D to s.d instruction flags.
1308 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1310 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1312 start-sanitize-tic80
1313 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1315 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1316 PC relative offset forms before the 15 bit forms. An assembler command
1317 line option now chooses the default.
1320 start-sanitize-r5900
1321 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1323 * mips-opc.c: Add many missing r5900 instructions.
1327 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1329 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1330 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1333 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1335 * configure: Only build libopcodes shared if --enable-shared's value
1336 was `yes', or was set to `*opcodes*'.
1337 * aclocal.m4: Likewise.
1338 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1339 original source of this bit of code. It's not clear what the best fix
1342 start-sanitize-r5900
1343 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1345 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1347 start-sanitize-tic80
1348 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1350 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1351 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1352 offset forms before the 15 bit forms, to default to the long forms.
1355 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1357 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1359 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1361 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1362 symbol if none is present.
1363 (print_insn_big_arm): Prevent examination of stored symbol if
1366 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1368 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1370 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1372 * disassemble.c: Remove disasm_symaddr() function.
1374 * arm-dis.c: Use info->symbol instead of info->flags to determine
1375 if disassmbly should be in Thumb or Arm mode.
1377 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1379 * arm-dis.c: Add support for disassembling Thumb opcodes.
1380 (print_insn_thumb): New function.
1382 * disassemble.c (disasm_symaddr): New function.
1384 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1385 (thumb_opcodes): Table of Thumb opcodes.
1387 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1389 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1391 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1392 and 'v' as operand types.
1394 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1396 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1397 <olivier.carmona@di.epfl.ch>.
1398 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1399 which has a two word opcode with a one word argument.
1402 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1404 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1405 unsigned, not signed.
1406 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1409 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1411 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1412 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1413 (ftrv): Slay the cut-and-paste monster.
1415 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1417 * d10v-dis.c (print_operand):
1418 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1420 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1422 * d10v-opc.c (OPERAND_FLAG): Split into:
1423 (OPERAND_FFLAG, OPERAND_CFLAG) .
1427 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1429 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1430 field for all INSN_MACRO's.
1431 * mips16-opc.c: same
1433 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1435 * mips-opc.c (sync,cache): These are 3900 insns.
1437 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1439 sh-opc.h (sh_table): Remove ftst/nan.
1441 start-sanitize-vr5400
1442 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1444 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1445 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1447 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1451 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1453 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1454 Add tx49 insns and configury.
1457 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1459 * mips-opc.c (ffc, ffs): Fix mask.
1462 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1464 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1468 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1470 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1471 start-sanitize-vr5400
1472 Added VR5400 instructions.
1473 (N5): New cpu-id macro.
1475 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1477 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1479 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1480 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1482 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1484 * v850-dis.c (disassemble): Replace // with /* ... */
1486 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1488 * sparc-opc.c: Add wr & rd for v9a asr's.
1489 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1490 (v9a_asr_reg_names): New variable.
1491 Patch from David Miller <davem@vger.rutgers.edu>.
1493 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1495 * sparc-opc.c (v9notv9a): New insn type.
1496 (IMPDEP): Move to the end to not conflict with edge8 et al.
1497 Patch from David Miller <davem@vger.rutgers.edu>.
1499 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1501 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1503 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1505 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1507 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1509 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1510 of disassemble_info structure to determine if an overlay address
1511 has a matching symbol in low memory.
1513 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1514 new symbol_at_address_func field in disassemble_info structure.
1516 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1518 * v850-opc.c (extract_d22): Use signed arithmatic.
1520 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1522 * mips-opc.c: Three op mult is not an ISA insn.
1524 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1526 * mips-opc.c: Fix formatting.
1528 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1530 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1531 than assuming that char is signed. Explicitly sign extend 16 bit
1532 values, rather than assuming that short is 16 bits.
1533 (OP_sI, OP_J, OP_DIR): Likewise.
1535 start-sanitize-v850e
1536 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1538 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1542 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1544 * v850-opc.c: Fix typo in comment.
1546 * v850-dis.c (disassemble): Add test of processor type when
1547 determining opcodes.
1549 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1551 * configure.in: Use a diversion to set enable_shared before the
1552 arguments are parsed.
1553 * configure: Rebuild.
1555 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1557 * m68k-opc.c (TBL1): Use ! rather than `.
1558 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1560 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1562 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1564 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1566 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1569 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1570 * aclocal.m4: Rebuild with new libtool.
1571 * configure: Rebuild.
1573 start-sanitize-v850e
1574 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1576 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1579 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1581 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1583 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1585 * v850-opc.c (v850_opcodes): Further rearrangements.
1588 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1590 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1593 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1595 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1598 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1600 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1602 * mips16-opc.c: Added mips16 sdbbp.
1605 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1607 * v850-opc.c: Initialise processors field of v850_opcode structure.
1610 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1612 Merge changes from Martin Hunt:
1614 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1616 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1617 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1618 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1620 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1622 * d30v-dis.c (print_insn): First operand of d*i (delayed
1623 branch) instructions is relative.
1625 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1626 (d30v_operand_table): Add IMM6S3 type.
1627 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1629 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1630 and cmp instructions.
1632 * d30v-opc.c: Correct entries for repeat*, and sat*.
1633 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1634 types. Correct several formats.
1636 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1638 * d30v-opc.c (pre_defined_registers): Change control registers.
1640 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1641 SHORT_C2. Manual was incorrect.
1643 * d30v-dis.c (lookup_opcode): Return value now indicates
1644 if an opcode has a short and a long form. Used for deciding
1645 to append a ".s" or ".l".
1646 (print_insn): Append a ".s" to an instruction if it is
1647 the short form and ".l" if it is a long form. Do not append
1648 anything if the instruction has only one possible size.
1650 * d30v-opc.c: Change mulx2h to require an even register.
1651 New form: SHORT_A2; a SHORT_A form that needs an even
1652 register as the first operand.
1654 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1655 instruction was not being disassembled if there were an odd
1656 number of instructions.
1658 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1661 start-sanitize-v850e
1662 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1664 * v850-dis.c (disassemble): Improved display of register lists.
1667 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1669 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1670 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1671 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1672 fandnot1s, fandnot2s.
1674 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1676 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1678 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1680 * cgen-asm.c (cgen_parse_address): New argument resultp.
1681 All callers updated.
1682 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1684 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1686 * mn10200-dis.c (disassemble): PC relative instructions are
1687 relative to the next instruction, not the current instruction.
1689 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1691 * v850-dis.c (disassemble): Only signed extend values that are not
1692 returned by extract functions.
1693 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1695 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1697 * v850-opc.c: Update comments. Remove use of
1698 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1700 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1702 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1704 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1706 * configure: Rebuilt with latest devo autoconf for NT support.
1708 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1710 * v850-dis.c (disassemble): Use curly brace syntax for register
1713 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1714 where r0 is being used as a destination register.
1716 start-sanitize-v850e
1717 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1719 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1722 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1724 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1725 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1726 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1727 Add insns to access SGR and DBR.
1728 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1730 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1732 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1734 start-sanitize-v850e
1735 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1737 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1738 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1741 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1743 * configure (cgen_files): Add support for v850e target.
1744 * configure.in (cgen_files): Add support for v850e target.
1746 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1748 * configure (cgen_files): Add support for v850ea target.
1749 * configure.in (cgen_files): Add support for v850ea target.
1752 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1754 * configure.in (bfd_arc_arch): Add.
1755 * configure: Rebuild.
1756 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1757 * Makefile.in: Rebuild.
1758 * arc-dis.c, arc-opc.c: New files.
1759 * disassemble.c (ARCH_all): Define ARCH_arc.
1760 (disassembler): Add ARC support.
1762 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1764 start-sanitize-v850e
1765 * v850-dis.c (disassemble): Add support for v850EA instructions.
1767 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1768 (v850_opcodes): Add v850EA instructions.
1770 * v850-dis.c (disassemble): Add support for v850E instructions.
1772 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1773 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1774 insert_spe, extract_spe): New Functions.
1775 (v850_opcodes): Add v850E instructions.
1778 * v850-opc.c: Reorganised and re-layed out to improve readability
1781 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1783 * configure: Rebuild with autoconf 2.12.1.
1785 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1787 * aclocal.m4, configure: Rebuild with new automake patches.
1789 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1791 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1792 * acinclude.m4: Just include acinclude.m4 from BFD.
1793 * aclocal.m4, configure: Rebuild.
1795 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1797 * Makefile.am: New file, based on old Makefile.in.
1798 * acconfig.h: New file.
1799 * acinclude.m4: New file.
1800 * stamp-h.in: New file.
1801 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1802 Removed shared library handling; now handled by libtool. Replace
1803 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1804 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1805 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1806 handling in AC_OUTPUT.
1807 * dep-in.sed: Change .o to .lo.
1808 * Makefile.in: Now built with automake.
1809 * aclocal.m4: Now built with aclocal.
1810 * config.in, configure: Rebuild.
1812 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1814 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1816 start-sanitize-r5900
1817 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1819 * mips-opc.c: Fix coding of mtsa.
1822 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1824 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1826 * sparc-dis.c (sorted_opcodes): New static local.
1827 (struct opcode_hash): `opcode' is pointer to const element.
1828 (build_hash): First arg is now table of sorted pointers.
1829 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1830 (compare_opcodes): Update.
1832 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1834 * cgen-opc.c: #include <ctype.h>.
1835 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1836 Handle case insensitive hashing.
1837 (hash_keyword_value): Change type of `value' to unsigned int.
1839 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1841 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1842 precision FP, mark it as such. Likewise for double precision
1843 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1845 start-sanitize-r5900
1846 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1849 start-sanitize-r5900
1850 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1852 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1853 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1856 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1858 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1860 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1861 nesting depth when all the macros are expanded.
1863 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1865 * sparc-opc.c: The fcmp v9a instructions take an integer register
1866 as a destination, not a floating point register. From Christian
1867 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1869 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1871 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1872 syntax. From Roman Hodek
1873 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1875 * i386-dis.c (twobyte_has_modrm): Fix pand.
1877 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1879 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1881 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1883 * arm-dis.c: Add prototypes for arm_decode_shift and
1886 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1888 * mips-opc.c: Add r3900 insns.
1890 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1892 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1893 print delay slot instructions on the same line. When using a PC
1894 relative load, add a comment with the value being loaded if it can
1897 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1899 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1900 to pushS/popS for segment regs and byte constant so that
1901 pushw/popw printed when in 16 bit data mode.
1903 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1904 print cbtw, cwtd in 16 bit data mode.
1905 * i386-dis.c (putop): extra case W to support above.
1907 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1908 address size prefix in 16 bit address mode.
1910 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1912 * sh-dis.c: Reindent. Rename local variable fprintf to
1915 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1917 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1919 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1921 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1923 * mips16-opc.c (mip16_opcodes): same.
1925 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1927 * m68k-opc.c (moveb): Change $d to %d.
1929 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1931 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1932 (twobyte_has_modrm): Likewise.
1934 (OP_MMX, OP_EM, OP_MS): New static functions.
1936 * i386-dis.c: Revert patch of April 4. The output now matches
1939 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1941 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1944 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1946 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1948 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1950 * Makefile.in (install): Depend upon installdirs.
1951 (installdirs): New target.
1953 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1955 From Thomas Graichen <graichen@rzpd.de>:
1956 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1957 * configure: Rebuild.
1959 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1961 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1962 Delete string{,s}.h support.
1964 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1966 * cgen-asm.c (cgen_parse_operand_fn): New global.
1967 (cgen_parse_{{,un}signed_integer,address}): Update call to
1968 cgen_parse_operand_fn.
1969 (cgen_init_parse_operand): New function.
1970 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1971 from cgen_asm_init_parse.
1972 (m32r_cgen_assemble_insn): New operand `errmsg'.
1973 Delete call to as_bad, return error message to caller.
1974 (m32r_cgen_asm_hash_keywords): #if 0 out.
1976 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1978 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1980 [case 'J']: Fix typo in register name.
1982 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1984 * configure.in: Substitute SHLIB_LIBS.
1985 * configure: Rebuild.
1986 * Makefile.in (SHLIB_LIBS): New variable.
1987 ($(SHLIB)): Use $(SHLIB_LIBS).
1989 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1991 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1993 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1995 * disassemble.c (disassembler): Handle m32r.
1997 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1999 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2000 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2001 * Makefile.in (CFILES): Add them.
2002 (ALL_MACHINES): Add them.
2003 (dependencies): Regenerate.
2004 * configure.in (cgen_files): New variable.
2005 (bfd_m32r_arch): Add entry.
2006 * configure: Regenerate.
2008 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2010 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2011 * configure: Rebuild.
2013 * Makefile.in: Rebuild dependencies.
2015 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2017 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2020 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2022 * Branched binutils 2.8.
2024 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2026 * m10200-dis.c: Rename from mn10200-dis.c.
2027 * m10200-opc.c: Rename from mn10200-opc.c.
2028 * m10300-dis.c: Rename from mn10300-dis.c
2029 * m10300-opc.c: Rename from mn10300-opc.c.
2030 * Makefile.in: Update accordingly.
2032 * mips16-opc.c: Add mul and dmul macros.
2034 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2036 * makefile.vms: Update CFLAGS, add clean target.
2038 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2040 * mips-opc.c: Add "wait". From Ralf Baechle
2041 <ralf@gnu.ai.mit.edu>.
2043 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2044 * configure, config.in: Rebuild.
2045 * sysdep.h: Include <stdlib.h> if it exists.
2046 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2048 * Makefile.in: Rebuild dependencies.
2050 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2052 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2053 Andrew Bray <andy@madhouse.demon.co.uk>.
2055 * mips-opc.c: Add cast when setting mips_opcodes.
2057 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2059 * v850-dis.c (disassemble): Fix sign extension problem.
2060 * v850-opc.c (extract_d*): Fix sign extension problems to make
2061 disassembly calculate branch offsets correctly.
2063 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2065 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2067 * mips-opc.c: Add dctr and dctw.
2070 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2072 * d30v-dis.c (print_insn): Change the way signed constants
2075 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2077 * Makefile.in (BFD_H): New variable.
2078 (HFILES): New variable.
2079 (CFILES): Add all C files.
2080 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2081 Delete old dependencies, and build new ones.
2082 * dep-in.sed: New file.
2084 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2086 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2088 start-sanitize-coldfire
2089 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2091 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2094 end-sanitize-coldfire
2095 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2097 * mn10200-opc.c: Change "trap" to "syscall".
2098 * mn10300-opc.c: Add new "syscall" instruction.
2100 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2102 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2103 mulul insns on the coldfire.
2105 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2107 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2108 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2109 (print_insn_little_arm): Likewise.
2111 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2113 Based on patches from H.J. Lu <hjl@lucon.org>:
2114 * i386-dis.c (fetch_data): Add prototype.
2115 * m68k-dis.c (fetch_data): Add prototype.
2116 (dummy_print_address): Add prototype. Make static.
2117 * ppc-opc.c (valid_bo): Add prototype.
2118 * sparc-dis.c (build_hash_table): Add prototype.
2119 (is_delayed_branch, compute_arch_mask): Add prototypes.
2120 (print_insn_sparc): Make several local variables const.
2121 (compare_opcodes): Change arguments to const PTR. Add prototype.
2122 * sparc-opc.c (arg): Change name field to be const.
2123 (lookup_name, lookup_value): Add prototypes. Change table and
2124 name parameters to be const.
2125 (sparc_encode_asi): Change name parameter to be const.
2126 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2127 (sparc_encode_sparclet_cpreg): Likewise.
2128 (sparc_decode_asi): Change return type to be const.
2129 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2130 (sparc_decode_sparclet_cpreg): Likewise.
2132 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2134 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2135 Solaris doesn't like the combined options, and the -f is
2137 (stamp-tshlink, install): Likewise.
2139 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2141 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2144 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2146 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2148 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2150 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2153 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2155 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2157 start-sanitize-tic80
2158 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2160 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2162 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2164 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2167 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2169 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2170 floatformat_to_double to make portable.
2171 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2174 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2176 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2177 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2179 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2181 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2182 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2184 start-sanitize-tic80
2185 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2187 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2188 (OFF_SL_BR_SCALED): ... to this, and added the flag
2189 TIC80_OPERAND_BASEREL to the flags word.
2190 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2194 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2196 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2197 Change mips_opcodes from const array to a pointer,
2198 and change bfd_mips_num_opcodes from const int to int,
2199 so that we can increase the size of the mips opcodes table
2202 start-sanitize-tic80
2203 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2205 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2206 store BITNUM values in the table in one's complement form
2207 to match behavior when assembler is given a raw numeric
2208 value for a BITNUM operand.
2209 * tic80-dis.c (print_operand_bitnum): Ditto.
2213 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2215 * d30v-opc.c: Removed references to FLAG_X.
2218 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2220 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2223 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2225 * Makefile.in: Added d30v object files.
2226 * configure: (bfd_d30v_arch) Rebuilt.
2227 * configure.in: (bfd_d30v_arch) Added new case.
2228 * d30v-dis.c: New file.
2229 * d30v-opc.c: New file.
2230 * disassemble.c (disassembler) Add entry for d30v.
2233 start-sanitize-tic80
2234 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2236 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2237 representations for the floating point BITNUM values.
2239 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2241 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2242 in the table in one's complement form, as they appear in the
2244 (tic80_symbol_to_value): Use macros to access predefined
2246 (tic80_value_to_symbol): Ditto.
2247 (tic80_next_predefined_symbol): New function.
2248 * tic80-dis.c (print_operand_bitnum): Remove code that did
2249 one's complement for BITNUM values.
2252 start-sanitize-r5900
2253 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2255 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2258 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2260 * makefile.vms: Remove 8 bit characters. Update to latest
2263 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2265 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2267 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2269 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2270 (IMM24_PCREL): Likewise.
2272 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2274 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2275 address for an extended PC relative instruction that is not a
2278 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2280 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2283 start-sanitize-tic80
2284 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2286 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2287 (tic80_opcodes): Sort entries so that long immediate forms
2288 come after short immediate forms, making it easier for
2289 assembler to select the right one for a given operand.
2292 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2294 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2296 (print_insn_mips16): Likewise.
2298 start-sanitize-r5900
2299 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2301 * mips-opc.c: add r5900.
2304 start-sanitize-tic80
2305 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2307 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2308 a symbol class that restricts translation to just that
2309 class (general register, condition code, etc).
2311 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2313 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2314 and REG_DEST_E for register operands that have to be
2315 an even numbered register. Add REG_FPA for operands that
2316 are one of the floating point accumulator registers.
2317 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2318 (tic80_opcodes): Change entries that need even numbered
2319 register operands to use the new operand table entries.
2320 Add "or" entries that are identical to "or.tt" entries.
2323 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2325 * mips16-opc.c: Add new cases of exit instruction for
2327 * mips-dis.c (print_mips16_insn_arg): Display floating point
2328 registers in operands of exit instruction. Print `$' before
2329 register names in operands of entry and exit instructions.
2331 start-sanitize-tic80
2332 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2334 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2335 pairs for all predefined symbols recognized by the assembler.
2336 Also used by the disassembling routines.
2337 (tic80_symbol_to_value): New function.
2338 (tic80_value_to_symbol): New function.
2339 * tic80-dis.c (print_operand_control_register,
2340 print_operand_condition_code, print_operand_bitnum):
2341 Remove private tables and use tic80_value_to_symbol function.
2344 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2346 * d10v-dis.c (print_operand): Change address printing
2347 to correctly handle PC wrapping. Fixes PR11490.
2349 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2351 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2354 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2356 * mips-dis.c (print_insn_mips16): Set insn_info information.
2357 (print_mips16_insn_arg): Likewise.
2359 * mips-dis.c (print_insn_mips16): Better handling of an extend
2360 opcode followed by an instruction which can not be extended.
2362 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2364 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2365 coldfire moveb instruction to not allow an address register as
2366 destination. Although the documentation does not indicate that
2367 this is invalid, experiments uncovered unexpected behavior.
2368 Added a comment explaining the situation. Thanks to Andreas
2369 Schwab for pointing this out to me.
2371 start-sanitize-tic80
2372 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2374 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2375 entries are presorted so that entries with the same mnemonic are
2376 adjacent to each other in the table. Sort the entries for each
2377 instruction so that this is true.
2380 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2382 * m68k-dis.c: Include <libiberty.h>.
2383 (print_insn_m68k): Sort the opcode table on the most significant
2384 nibble of the opcode.
2386 start-sanitize-tic80
2387 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2389 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2390 "vsub", "vst", "xnor", and "xor" instructions.
2391 (V_a1): Renamed from V_a, msb of accumulator reg number.
2392 (V_a0): Add macro, lsb of accumulator reg number.
2394 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2396 * tic80-dis.c (print_insn_tic80): Broke excessively long
2397 function up into several smaller ones and arranged for
2398 the instruction printing function to be callable recursively
2399 to print vector instructions that have both a load and a
2400 math instruction packed into a single opcode.
2401 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2402 to explain why it comes after the other vector opcodes.
2405 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2407 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2408 move insns to handle immediate operands.
2410 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2412 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2413 fix operand mask in the "moveml" entries for the coldfire.
2415 start-sanitize-tic80
2416 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2418 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2419 New macros for building vector instruction opcodes.
2420 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2421 FMT_LI, which were unused. The field is now a flags field.
2422 Remove some opcodes that are possible, but illegal, such
2423 as long immediate instructions with doubles for immediate
2424 values. Add "vadd" and "vld" instructions.
2426 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2428 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2429 the order more logical. Move the shift alias instructions ("rotl",
2430 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2431 interspersed with the regular sr.x and sl.x instructions. Add
2432 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2433 "sub", "subu", "swcr", and "trap".
2435 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2437 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2438 (OFF_SL_PC): Renamed from OFF_SL.
2439 (OFF_SS_BR): New operand type for base relative operand.
2440 (OFF_SL_BR): New operand type for base relative operand.
2441 (REG_BASE): New operand type for base register operand.
2442 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2443 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2444 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2446 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2447 10 char field, padded with spaces on rhs, rather than a string
2448 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2449 than old TIC80_OPERAND_RELATIVE. Add support for new
2450 TIC80_OPERAND_BASEREL flag bit.
2452 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2454 * tic80-dis.c (print_insn_tic80): Print floating point operands
2456 * tic80-opc.c (SPFI): Add single precision floating point
2457 immediate operand type.
2458 (ROTATE): Add rotate operand type for shifts.
2459 (ENDMASK): Add for shifts.
2460 (n): Macro for the 'n' bit.
2461 (i): Macro for the 'i' bit.
2462 (PD): Macro for the 'PD' field.
2463 (P2): Macro for the 'P2' field.
2464 (P1): Macro for the 'P1' field.
2465 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2469 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2471 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2472 adding in current address for pc-relative operands.
2474 start-sanitize-tic80
2475 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2477 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2478 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2479 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2480 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2481 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2482 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2483 (REG_SCALED, LSI_SCALED): New operand types.
2484 (E): New macro for 'E' bit at bit 27.
2485 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2486 opcodes, including the various size flavors (b,h,w,d) for
2487 the direct load and store instructions.
2489 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2491 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2493 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2494 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2495 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2496 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2497 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2498 masks with "MASK_* & ~M_*" to get the M bit reset.
2499 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2501 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2503 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2504 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2505 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2507 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2508 CC, SICR, and LICR table entries.
2509 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2510 "bcnd", and "brcr" opcodes.
2513 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2515 * ppc-opc.c (powerpc_operands): Make comment match the
2516 actual fields (no shift field).
2517 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2518 start-sanitize-tic80
2519 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2520 partial implementation, work in progress.
2521 * tic80-opc.c (tic80_operands): Begin construction operands table.
2522 (tic80_opcodes): Continue populating opcodes table and start
2523 filling in the operand indices.
2524 (tic80_num_opcodes): Add this.
2527 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2529 * m68k-opc.c: Add #B case for moveq.
2531 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2533 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2534 before they are used.
2536 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2538 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2539 for "breakpoint" instruction.
2541 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2543 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2544 (dep): Use ALL_CFLAGS rather than CFLAGS.
2546 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2548 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2551 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2553 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2554 start-sanitize-tic80
2555 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2558 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2560 * mips16-opc.c: Add "abs".
2562 start-sanitize-tic80
2563 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2565 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2566 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2567 (disassembler): Add bfd_arch_tic80 support to set disassemble
2568 to print_insn_tic80.
2569 * tic80-dis.c (print_insn_tic80): Add stub.
2571 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2573 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2574 * configure: Regenerate with autoconf.
2575 * tic80-dis.c: Add file.
2576 * tic80-opc.c: Add file.
2579 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2581 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2583 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2585 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2586 (mn10200_opcodes): Use it for some logicals and btst insns.
2587 Add "break" and "trap" instructions.
2589 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2591 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2593 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2595 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2596 relative load or add now depends upon whether the instruction is
2599 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2601 * mn10200-dis.c: Finish writing disassembler.
2602 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2603 Fix mask for "jmp (an)".
2605 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2606 handle endianness issues for mn10300.
2608 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2610 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2612 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2613 instruction. Fix opcode field for "movb (imm24),dn".
2615 * mn10200-opc.c (mn10200_operands): Fix insertion position
2618 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2620 * mn10200-opc.c: Create mn10200 opcode table.
2621 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2622 but moving along nicely.
2624 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2626 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2628 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2630 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2631 specifiers for fmovem* instructions.
2633 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2635 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2637 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2639 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2642 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2644 * mn10300-opc.c: Add some comments explaining the various
2647 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2649 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2651 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2654 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2655 operand specifiers in fmovm* instructions.
2657 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2659 * ppc-opc.c (insert_li): Give an error if the offset has the two
2660 least significant bits set.
2662 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2664 * mips-dis.c (print_insn_mips16): Separate the instruction from
2665 the arguments with a tab, not a space.
2667 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2669 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2672 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2675 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2677 * configure: Rebuild with autoconf 2.12.
2679 Add support for mips16 (16 bit MIPS implementation):
2680 * mips16-opc.c: New file.
2681 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2682 (mips16_reg_names): New static array.
2683 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2684 after seeing a 16 bit symbol.
2685 (print_insn_little_mips): Likewise.
2686 (print_insn_mips16): New static function.
2687 (print_mips16_insn_arg): New static function.
2688 * mips-opc.c: Add jalx instruction.
2689 * Makefile.in (mips16-opc.o): New target.
2690 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2691 * configure: Rebuild.
2693 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2695 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2696 operand specifiers in *save, *restore and movem* instructions.
2698 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2701 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2702 register operands for immediate arithmetic, not, neg, negx, and
2703 set according to condition instructions.
2705 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2706 specifier of the effective-address operand in immediate forms of
2707 arithmetic instructions. The specifier for the immediate operand
2708 notes how and where the constant will be stored.
2710 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2712 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2715 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2718 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2720 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2722 * mn10300-dis.c (disassemble): Handle register lists.
2724 * mn10300-opc.c: Fix handling of register list operand for
2725 "call", "ret", and "rets" instructions.
2727 * mn10300-dis.c (disassemble): Print PC-relative and memory
2728 addresses symbolically if possible.
2729 * mn10300-opc.c: Distinguish between absolute memory addresses,
2730 pc-relative offsets & random immediates.
2732 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2734 (disassemble): Handle SPLIT and EXTENDED operands.
2736 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2738 * mn10300-dis.c: Rough cut at printing some operands.
2740 * mn10300-dis.c: Start working on disassembler support.
2741 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2743 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2745 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2747 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2749 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2751 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2753 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2754 register argument is calls and jmp instructions.
2756 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2758 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2759 getx operand. Fix opcode for mulqu imm,dn.
2761 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2763 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2764 in MN10300_OPERAND_SPLIT operands for how many bits
2765 appear in the basic insn word. Add IMM32_HIGH24,
2766 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2767 (mn10300_opcodes): Use new operands as needed.
2769 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2770 for bset, bclr, btst instructions.
2771 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2773 * mn10300-opc.c (mn10300_operands): Remove many redundant
2774 operands. Update opcode table as appropriate.
2775 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2776 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2778 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2780 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2781 operands (for indexed load/stores). Fix bitpos for DI
2782 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2783 few instructions that insert immediates/displacements in the
2784 middle of the instruction. Add IMM8E for 8 bit immediate in
2785 the extended part of an instruction.
2786 (mn10300_operands): Use new opcodes as appropriate.
2788 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2790 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2791 sequential so the assembler never parallelizes it with
2794 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2796 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2797 a data/address register that appears in register field 0
2798 and register field 1.
2799 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2801 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2803 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2804 standard disassembly.
2806 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2807 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2808 Recategorize PALcode instructions.
2810 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2812 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2814 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2816 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2817 there are no operand types.
2819 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2821 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2823 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2825 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2827 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2829 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2831 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2832 and sst.w instructions.
2834 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2837 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2839 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2842 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2844 * ppc-opc.c (PPCPWR2): Define.
2845 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2848 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2850 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2851 field for movhu instruction.
2853 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2854 cast value to "long" not "signed long" to keep hpux10
2857 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2859 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2862 * mn10300-opc.c (FMT*): Remove definitions.
2864 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2865 for shift-by-register opcodes.
2867 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2868 into [AD][MN][01] for encoding the position of the register
2871 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2873 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2874 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2876 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2878 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2879 Fix various typos. Add "PAREN" operand.
2880 (MEM, MEM2): Define.
2881 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2882 operands. Fix several typos.
2884 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2887 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2889 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2890 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2892 (mn10300_opcodes): Break opcode format out into its own field.
2893 Update many operand fields to deal with signed vs unsigned
2894 issues. Fix one or two typos in the "mov" instruction
2895 opcode, mask and/or operand fields.
2897 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2899 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2900 m68851 wasn't reset.
2902 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2904 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2905 all opcodes. Very rough cut at operands for all opcodes.
2907 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2910 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2912 * mn10200-opc.c, mn10300-opc.c: New files.
2913 * mn10200-dis.c, mn10300-dis.c: New files.
2914 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2915 * disassemble.c: Break mn10x00 support into 10200 and 10300
2917 * configure.in: Likewise.
2918 * configure: Rebuilt.
2920 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2922 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2924 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2926 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2928 * disassemble (ARCH_mn10x00): Define.
2929 (disassembler): Handle bfd_arch_mn10x00.
2930 * configure.in: Recognize bfd_mn10x00_arch.
2931 * configure: Rebuilt.
2933 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2935 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2936 accordingly. Don't declare functions using op_rtn.
2938 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2940 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2941 params to be more standard.
2942 * (disassemble): Print absolute addresses and symbolic names for
2943 branch and jump targets.
2944 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2946 * (v850_opcodes): Add breakpoint insn.
2948 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2950 * m68k-opc.c: Move the fmovemx data register cases before the
2951 other cases, so that they get recognized before the data register
2952 does gets treated as a degenerate register list.
2954 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2956 * mips-opc.c: Add a case for "div" and "divu" with two registers
2957 and a destination of $0.
2959 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2961 * mips-dis.c (print_insn_arg): Add prototype.
2962 (_print_insn_mips): Ditto.
2964 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2966 * mips-dis.c (print_insn_arg): Print condition code registers as
2969 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2971 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2973 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2975 * v850-dis.c (disassemble): Make static. Provide prototype.
2977 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2979 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2982 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2984 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2985 ']' characters into the output stream.
2986 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2987 Add "memop" field to all opcodes (for the disassembler).
2988 Reorder opcodes so that "nop" comes before "mov" and "jr"
2989 comes before "jarl".
2991 * v850-dis.c (print_insn_v850): Fix typo in last change.
2993 * v850-dis.c (print_insn_v850): Properly handle disassembling
2994 a two byte insn at the end of a memory region when the memory
2995 region's size is only two byte aligned.
2997 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2999 * v850-dis.c (v850_reg_names): Define.
3000 (v850_sreg_names, v850_cc_names): Likewise.
3001 (disassemble): Very rough cut at printing operands (unformatted).
3003 * v850-opc.c (BOP_MASK): Fix.
3004 (v850_opcodes): Fix mask for jarl and jr.
3006 * v850-dis.c: New file. Skeleton for disassembler support.
3007 * Makefile.in Remove v850 references, they're not needed here.
3008 * configure.in: Add v850-dis.o when building v850 toolchains.
3009 * configure: Rebuilt.
3010 * disassemble.c (disassembler): Call v850 disassembler.
3012 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3013 (insert_d8_6, extract_d8_6): New functions.
3014 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3015 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3017 (IF4A, IF4B): Use "D7" instead of "D7S".
3018 (IF4C, IF4D): Use "D8_7" instead of "D8".
3019 (IF4E, IF4F): New. Use "D8_6".
3020 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3021 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3023 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3024 (v850_operands): Change D16 to D16_15, use special insert/extract
3025 routines. New new D16 that uses the generic insert/extract code.
3026 (IF7A, IF7B): Use D16_15.
3027 (IF7C, IF7D): New. Use D16.
3028 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3030 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3031 message. Issue an error if the branch offset is odd.
3033 * v850-opc.c: Add notes about needing special insert/extract
3034 for all the load/store insns, except "ld.b" and "st.b".
3036 * v850-opc.c (insert_d22, extract_d22): New functions.
3037 (v850_operands): Use insert_d22 and extract_d22 for
3039 (insert_d9): Fix range check.
3041 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3043 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3044 and set bits field to D9 and D22 operands.
3046 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3048 * v850-opc.c (v850_operands): Define SR2 operand.
3049 (v850_opcodes): "ldsr" uses R1,SR2.
3051 * v850-opc.c (v850_opcodes): Fix opcode specs for
3052 sld.w, sst.b, sst.h, sst.w, and nop.
3054 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3056 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3057 end of the opcode table.
3059 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3061 * d10v-opc.c (pre_defined_registers): Added register pairs,
3062 "r0-r1", "r2-r3", etc.
3064 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3066 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3067 Create I16U for an unsigned 16bit mmediate operand.
3068 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3070 * v850-opc.c (v850_operands): Define EP operand.
3071 (IF4A, IF4B, IF4C, IF4D): Use EP.
3073 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3074 with immediate operand, "movhi". Tweak "ldsr".
3076 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3077 correct. Get sld.[bhw] and sst.[bhw] closer.
3079 * v850-opc.c (v850_operands): "not" is a two byte insn
3081 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3083 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3085 * v850-opc.c (two): Get order of words correct.
3087 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3089 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3090 register source and destination operands.
3091 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3093 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3094 same thinko in "trap" opcode.
3096 * v850-opc.c (v850_opcodes): Add initializer for size field
3099 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3100 Add D8 for 8-bit unsigned field in short load/store insns.
3101 (IF4A, IF4D): These both need two registers.
3102 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3103 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3104 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3105 for "ldsr" and "stsr".
3106 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3109 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3110 short store word (sst.w).
3112 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3114 * v850-opc.c (v850_operands): Added insert and extract fields,
3115 pointers to functions that handle unusual operand encodings.
3117 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3119 * v850-opc.c (v850_opcodes): Enable "trap".
3121 * v850-opc.c (v850_opcodes): Fix order of displacement
3122 and register for "set1", "clr1", "not1", and "tst1".
3124 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3126 * v850-opc.c (v850_operands): Add "B3" support.
3127 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3130 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3132 * v850-opc.c: Close unterminated comment.
3134 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3136 * v850-opc.c (v850_operands): Add flags field.
3137 (v850_opcodes): add move opcodes.
3139 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3141 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3142 * configure: (bfd_v850v_arch) Add new case.
3143 * configure.in: (bfd_v850_arch) Add new case.
3144 * v850-opc.c: New file.
3146 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3148 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3150 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3152 * d10v-opc.c: Add additional information to the opcode
3153 table to help determinine which instructions can be done
3156 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3158 * mpw-make.sed: Update editing of include pathnames to be
3161 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3163 * arm-opc.h: Added "bx" instruction definition.
3165 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3167 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3169 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3171 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3173 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3175 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3177 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3179 * makefile.vms: Update for alpha-opc changes.
3181 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3183 * i386-dis.c (print_insn_i386): Actually return the correct value.
3184 (ONE, OP_ONE): #ifdef out; not used.
3186 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3188 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3189 Changed subi operand type to treat 0 as 16.
3191 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3193 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3196 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3198 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3199 memory transfer instructions. Add new format string entries %h and %s.
3200 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3203 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3205 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3206 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3208 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3210 * alpha-dis.c (print_insn_alpha_osf): Remove.
3211 (print_insn_alpha_vms): Remove.
3212 (print_insn_alpha): Make globally visible. Chose the register
3213 names based on info->flavour.
3214 * disassemble.c: Always return print_insn_alpha for the alpha.
3216 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3218 * d10v-dis.c (dis_long): Handle unknown opcodes.
3220 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3222 * d10v-opc.c: Changes to support signed and unsigned numbers.
3223 All instructions with the same name that have long and short forms
3224 now end in ".l" or ".s". Divs added.
3225 * d10v-dis.c: Changes to support signed and unsigned numbers.
3227 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3229 * d10v-dis.c: Change all functions to use info->print_address_func.
3231 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3233 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3234 move ccr/sr insns more strict so that the disassembler only
3235 selects them when the addressing mode is data register.
3237 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3238 * d10v-opc.c (pre_defined_registers): Declare.
3239 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3240 to pick a better name for the registers.
3242 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3244 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3245 operands for fexpand and fpmerge. From Christian Kuehnke
3246 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3248 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3250 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3251 print routine. Take new regnames and cpumask arguments.
3252 Kill the environment variable nonsense.
3253 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3254 (print_insn_alpha_vms): New function. Do VMS style regnames.
3255 * disassemble.c (disassembler): Test bfd flavour to pick
3256 between OSF and VMS routines. Default to OSF.
3258 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3260 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3261 * configure: Rebuild.
3262 * Makefile.in (install): Use @INSTALL_SHLIB@.
3264 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3266 * configure: (bfd_d10v_arch) Add new case.
3267 * configure.in: (bfd_d10v_arch) Add new case.
3268 * d10v-dis.c: New file.
3269 * d10v-opc.c: New file.
3270 * disassemble.c (disassembler) Add entry for d10v.
3272 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3274 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3275 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3277 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3279 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3280 distinguish between variants of the instruction set.
3281 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3282 distinguish between variants of the instruction set.
3284 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3286 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3287 the 8086 instruction set.
3288 * i386-dis.c: General cleanups. Make most things static. Add
3289 prototypes. Get rid of static variables aflags and dflags. Pass
3290 them as args (to almost everything).
3292 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3294 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3296 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3298 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3299 if the next arg is marked with SRC_IN_DST. Gross.
3301 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3302 we're looking for and find EXR.
3304 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3305 if we're looking for KBIT and we don't find it.
3307 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3310 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3311 3bit immediate operands.
3313 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3315 * Released binutils 2.7.
3317 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3318 <kkaempf@progis.ac-net.de>.
3320 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3322 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3324 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3326 * sparc-dis.c (print_insn_sparclite): New routine to print
3327 sparclite instructions.
3329 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3331 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3333 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3335 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3336 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3337 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3339 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3341 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3342 Use autoconf-set values.
3343 (docdir, oldincludedir): Removed.
3344 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3346 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3348 * alpha-opc.c: New file.
3349 * alpha-opc.h: Remove.
3350 * alpha-dis.c: Complete rewrite to use new opcode table.
3351 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3352 * configure: Rebuild with autoconf 2.10.
3353 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3354 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3356 (alpha-opc.o): New target.
3358 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3360 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3361 Set imm_added_to_rs1 even if the source and destination register
3364 * sparc-opc.c: Add some two operand forms of the wr instruction.
3366 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3368 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3371 * disassemble.c (disassembler): Handle H8/S.
3372 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3374 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3376 * sparc-opc.c: Add beq/teq as aliases for be/te.
3378 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3379 <sergei@msil.sps.mot.com>.
3381 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3383 * makefile.vms: New file.
3385 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3387 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3389 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3392 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3394 * i386-dis.c (OP_OFF): Call append_prefix.
3396 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3398 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3399 unsigned long to silence a warning from the Solaris PowerPC
3402 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3404 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3406 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3408 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3410 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3411 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3412 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3413 cpush, cpusha, cpull sparclet insns.
3415 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3417 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3419 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3421 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3422 Set F_FLOAT on other floating point instructions.
3424 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3426 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3428 (powerpc_opcodes): Add 860/821 specific SPRs.
3430 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3432 * configure.in: Permit --enable-shared to specify a list of
3433 directories. Set and substitute BFD_PICLIST.
3434 * configure: Rebuild.
3435 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3436 uses. Set to @BFD_PICLIST@.
3438 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3440 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3441 not "abs", which may be needed for the absolute in something
3442 like btst #0,@10:8. Print L_3 immediates separately from other
3443 immediates. Change ABSMOV reference to ABS8MEM.
3445 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3447 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3448 (current_arch_mask): New static global.
3449 (compute_arch_mask): New static function.
3450 (print_insn_sparc): Delete sparc_v9_p. New static local
3451 current_mach. Resort opcode table if current_mach changes.
3452 Generalize "insn not supported" test.
3453 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3454 Delete test for v9/!v9.
3455 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3457 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3458 (brfcx): Renamed to FBRX.
3459 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3460 coprocessor mnemonics are not supported on the sparclet).
3461 (condf): Renamed to CONDF.
3462 (SLCBCC2): Delete F_ALIAS flag.
3464 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3466 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3467 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3469 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3471 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3472 that the shared library version number is set correctly.
3474 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3476 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3477 Miles Bader <miles@gnu.ai.mit.edu>.
3478 * configure: Rebuild.
3480 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3482 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3485 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3487 * configure: Rebuild with autoconf 2.8.
3489 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3491 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3492 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3494 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3496 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3497 since they appear as targets in Makefile.in.
3498 * configure: Rebuild.
3500 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3502 * mpw-make.sed: Edit out shared library support bits.
3504 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3506 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3507 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3508 (sparc_opcodes): Add sparclet insns.
3509 (sparclet_cpreg_table): New static local.
3510 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3511 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3513 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3515 * i386-dis.c (index16): New static variable.
3516 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3518 (OP_indirE): Return result of OP_E.
3519 (OP_E): Check for 16 bit addressing mode, and disassemble
3520 correctly. Optimised 32 bit case a little. Don't print
3521 "(base,index,scale)" when sib specifies only an offset.
3523 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3525 * configure.in: Set and substitute SHLIB_DEP.
3526 * configure: Rebuild.
3527 * Makefile.in (SHLIB_DEP): New variable.
3528 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3529 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3530 COMMON_SHLIB, add them to piclist with appropriate modifications.
3531 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3532 here: just use piclist.
3534 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3536 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3537 (print_insn_sparc): Rewrite v9/not-v9 tests.
3538 (compare_opcodes): Likewise.
3539 * sparc-opc.c (MASK_<ARCH>): Define.
3540 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3541 (sparclet,v6notv9): Define.
3542 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3543 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3545 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3547 * configure.in: Call AC_PROG_CC before configure.host.
3548 * configure: Rebuild.
3550 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3552 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3554 * i386-dis.c (onebyte_has_modrm): New static array.
3555 (twobyte_has_modrm): New static array.
3556 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3558 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3560 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3563 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3565 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3568 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3570 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3571 m68010up, not just m68020up | cpu32.
3573 * Makefile.in (SONAME): New variable.
3574 ($(SHLINK)): Make a link to the transformed name, as well.
3575 (stamp-tshlink): New target.
3576 (install): Skip stamp-tshlink during install.
3578 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3580 * configure.in: Call AC_ARG_PROGRAM.
3581 * configure: Rebuild.
3582 * Makefile.in (program_transform_name): New variable.
3583 (install): Transform library name before installing it.
3585 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3587 * i960-dis.c (mem): Add HX dcinva instruction.
3589 Support for building as a shared library, based on patches from
3590 Alan Modra <alan@spri.levels.unisa.edu.au>:
3591 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3592 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3593 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3594 * configure: Rebuild.
3595 * Makefile.in (ALLLIBS): New variable.
3596 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3597 (COMMON_SHLIB, SHLINK): New variables.
3598 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3599 (STAGESTUFF): Remove variable.
3600 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3601 (stamp-piclist, piclist): New targets.
3602 ($(SHLIB), $(SHLINK)): New targets.
3603 ($(OFILES)): Depend upon stamp-picdir.
3604 (disassemble.o): Build twice if PICFLAG is set.
3605 (MOSTLYCLEAN): Add pic/*.o.
3606 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3607 (distclean): Remove pic and stamp-picdir.
3608 (install): Install shared libraries.
3609 (stamp-picdir): New target.
3611 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3613 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3614 Print unknown instruction as "unknown", rather than in hex.
3616 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3618 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3620 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3622 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3624 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3626 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3627 when necessary. From Ulrich Drepper
3628 <drepper@myware.rz.uni-karlsruhe.de>.
3630 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3632 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3633 sparc_num_opcodes. Update architecture enum values.
3634 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3635 (sparc_opcode_lookup_arch): New function.
3636 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3637 (sparc_opcodes): Add v9a shutdown insn.
3639 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3641 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3642 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3644 (print_insn_sparc64): Deleted.
3645 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3648 * sparc-opc.c (architecture_pname): Add v9a.
3650 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3652 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3653 incorrectly defined as 0x16 when it should be 0x15.
3654 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3655 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3656 excb (exception barrier) which is defined in the Alpha
3657 Architecture Handbook version 2.
3658 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3659 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3660 disassembled as or, for example.
3662 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3664 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3665 (_print_insn_mips): Change i from int to unsigned int.
3667 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3669 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3670 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3672 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3674 * i386-dis.c: Added Pentium Pro instructions.
3676 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3678 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3681 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3683 * sh-opc.h (sh_nibble_type): Added REG_B.
3684 (sh_arg_type): Added A_REG_B.
3685 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3687 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3689 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3691 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3693 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3695 * Makefile.in (distclean): Remove stamp-h. From Ronald
3696 F. Guilmette <rfg@monkeys.com>.
3698 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3700 From David Mosberger-Tang <davidm@azstarnet.com>:
3701 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3704 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3706 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3707 (sh_table): Added many SH3 opcodes.
3708 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3710 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3712 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3713 (subco,subco.): Mark this PPC, not PPCCOM.
3715 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3717 * configure: Rebuild with autoconf 2.7.
3719 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3721 * configure: Rebuild with autoconf 2.6.
3723 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3725 * configure.in: Sort list of architectures. Accept but do nothing
3726 for alliant, convex, pyramid, romp, and tahoe.
3728 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3730 * a29k-dis.c (print_special): Change num to unsigned int.
3732 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3734 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3737 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3739 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3740 * configure: Rebuilt.
3742 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3744 * configure.in: Add case for bfd_i860_arch.
3745 * configure: Rebuild.
3747 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3749 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3750 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3751 (NEXTDOUBLE): Likewise.
3752 (print_insn_m68k): Don't match fmoveml if there is more than one
3753 register in the list.
3754 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3756 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3758 * m68k-opc.c: Use #W rather than #w.
3759 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3761 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3763 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3764 and likewise for all the dbxx opcodes.
3766 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3768 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3770 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3772 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3773 the VR4100 specific instructions to the mips_opcodes structure.
3775 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3777 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3778 ugly Metrowerks bug in CW6, is fixed in CW7.
3780 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3782 * ppc-opc.c (whole file): Add flags for common/any support.
3784 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3786 * Makefile.in (BISON): Remove macro.
3787 (FLAGS_TO_PASS): Remove BISON.
3789 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3791 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3793 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3794 instructions that take no args by looking at the match mask.
3795 (print_insn_arg): Always print "%" before register names.
3796 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3797 [case '_']: Don't print "@#" before address.
3798 [case 'J']: Use "%s" as format string, not register name.
3799 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3801 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3803 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3806 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3808 From David Mosberger-Tang <davidm@azstarnet.com>
3810 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3811 (alpha_insn_set): added definitions for VAX floating point
3812 instructions (Unix compilers don't generate these, but handcoded
3813 assembly might still use them).
3815 * alpha-dis.c (print_insn_alpha): added support for disassembling
3816 the miscellaneous instructions in the Alpha instruction set.
3818 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3820 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3821 no longer create sysdep.h, sed ppc-opc.c to work around a
3822 serious Metrowerks C bug.
3823 * mpw-make.in: Remove.
3824 * mpw-make.sed: New file, used by mpw-configure to edit
3825 Makefile.in into an MPW makefile.
3827 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3829 * Makefile.in (maintainer-clean): New synonym for realclean.
3831 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3833 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3834 which use '0', '1', and '2' instead. Specify the proper size for
3835 a pmove immediate operand. Correct the pmovefd patterns to be
3836 moves to a register, not from a register.
3837 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3839 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3841 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3842 %psr, %wim, %tbr as F_NOTV9.
3844 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3846 * Makefile.in (Makefile): Just rebuild Makefile when running
3848 (config.h, stamp-h): New targets.
3849 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3850 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3851 rebuilding config.h.
3852 * configure: Rebuild.
3854 * mips-opc.c: Change unaligned loads and stores with "t,A"
3855 operands to use "t,A(b)".
3857 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3859 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3861 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3863 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3864 until 3 instead of until 2.
3866 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3868 * Makefile.in (ALL_CFLAGS): Define.
3869 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3870 (MOSTLYCLEAN): Add config.log.
3871 (distclean): Don't remove config.log.
3872 * configure.in: Substitute HDEFINES.
3873 * configure: Rebuild.
3875 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3877 * sh-opc.h (sh_arg_type): Add F_FR0.
3878 (sh_table, case fmac): Add F_FR0 as first argument.
3880 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3882 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3884 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3886 * sparc-dis.c: Remove all references to NO_V9.
3888 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3890 * aclocal.m4: Just include ../bfd/aclocal.m4.
3891 * configure: Rebuild.
3893 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3895 * sparc-dis.c (X_DISP19): Define.
3896 (print_insn, case 'G'): Use it.
3897 (print_insn, case 'L'): Sign extend displacement.
3899 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3901 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3902 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3903 host_makefile_frag or frags.
3904 * aclocal.m4: New file.
3905 * configure: Rebuild.
3906 * Makefile.in (INSTALL): Set to @INSTALL@.
3907 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3908 (INSTALL_DATA): Set to @INSTALL_DATA@.
3910 (AR_FLAGS): Set to rc rather than qc.
3911 (CC): Define as @CC@.
3912 (CFLAGS): Set to @CFLAGS@.
3913 (@host_makefile_frag@): Remove.
3914 (config.status): Remove dependency upon @frags@.
3916 * configure.in: ../bfd/config.bfd now just sets shell variables.
3917 Use them rather than looking through target Makefile fragments.
3918 * configure: Rebuild.
3920 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3922 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3924 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3926 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3927 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3930 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3931 (lookup_{name,value}): New functions.
3932 (prefetch_table): New static local.
3933 (sparc_{encode,decode}_prefetch): New functions.
3934 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3936 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3938 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3941 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3943 * sh-dis.c: Correct comment on first line of file.
3945 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3947 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3949 * sparc-opc.c (asi, membar): New static locals.
3950 (sparc_{encode,decode}_{asi,membar}): New functions.
3951 (sparc_opcodes, membar insn): Fix.
3952 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3953 Support decoding of membar masks.
3956 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3958 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3960 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3962 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3963 and likewise for the other branches. Add bhs as an alias for bcc,
3964 and likewise for the size variants. Add dbhs as an alias for
3967 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3969 * sh-opc.h (FP sts instructions): Update to match reality.
3971 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3973 * m68k-dis.c: (fpcr_names): Add % before all register names.
3974 (reg_names): Likewise.
3975 (print_insn_arg): Don't explicitly print % before register names.
3976 Add % before register names in static array names. In case 'r',
3977 print data registers as `@(Dn)', not `Dn@'. When printing a
3978 memory address, don't print @# before it.
3979 (print_indexed): Change base_disp and outer_disp from int to
3980 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3981 syntax. Sign extend 8 byte displacement correctly.
3982 (print_base): Print using MIT syntax. Print zpc when appropriate.
3983 Change parameter disp from int to bfd_vma.
3985 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3988 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3990 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3991 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3992 * sh-opc.h (sh_arg_type): Add new operand types.
3993 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3995 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3997 * Makefile.in (distclean): Remove generated file config.h.
3999 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4001 * Makefile.in (distclean): Remove generated file config.h.
4003 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4005 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4007 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4009 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4010 rather than numopcodes. Use m68k_opcodes rather than removed
4011 opcode function. Don't check F_ALIAS.
4012 (print_insn_arg): Change first parameter to be const char *.
4013 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4014 (m68k-opc.o): New target.
4015 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4016 * configure: Rebuild.
4018 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4020 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4021 (opcode_bits, opcode_hash_table): New variables.
4022 (opcodes_initialized): Renamed from opcodes_sorted.
4023 (build_hash_table): New function.
4024 (is_delayed_branch): Use hash table.
4025 (print_insn): Renamed from print_insn_sparc, made static.
4026 Build and use hash table. If !sparc64, ignore sparc64 insns,
4027 and vice-versa if sparc64.
4028 (print_insn_sparc, print_insn_sparc64): New functions.
4029 (compare_opcodes): Move sparc64 opcodes to end.
4030 Print commutative insns with constant second.
4031 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4033 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4035 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4036 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4037 avoids printing a delay slot in a delay slot.
4038 * sh-opc.h (sh_table): Fully bracket last entry.
4040 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4042 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4044 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4046 * configure.in: Get host_makefile_frag from ${srcdir}.
4048 * configure.in: Autoconfiscated. Check for string[s].h. Create
4049 config.h from config.in. Don't set up sysdep.h link.
4050 * sysdep.h: New file.
4051 * configure, config.in: New files, generated from configure.in.
4052 * Makefile.in: Updated to be processed autoconf-style.
4053 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4054 (Makefile): Depend on config.status.
4055 (config.status): New rule.
4056 * configure.bat: Update Makefile substitutions.
4058 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4060 * mips-opc.c (L1): Define.
4061 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4062 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4065 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4067 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4068 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4069 have multiple add units but only a single logical unit.
4071 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4072 shifted by 18, without any insertion or extraction function.
4073 (insert_cr, extract_cr): Remove.
4075 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4077 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4080 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4082 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4083 * sh-opc.h: Add copyright.
4085 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4087 * Makefile.in (crunch-m68k): Delete extra target accidentally
4088 checked in a while ago.
4090 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4092 * sh-opc.h (sh_table): Add SH3 support.
4094 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4096 * sh-opc.h: Added bsrf and braf.
4098 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4100 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4101 bogus [ls]fm{ea,fd} patterns.
4103 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4104 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4105 initialize it from memory. Make function static.
4106 (print_insn_{big,little}_arm): New functions.
4107 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4108 the correct endianness.
4110 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4112 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4115 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4117 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4118 17th, so that it builds again using GCC as the compiler.
4120 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4122 * mips-dis.c (print_insn_little_mips): Cast return value from
4123 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4124 expects an unsigned long, and that might be fewer words of
4125 argument storage (e.g., if bfd_vma is long long on a 32-bit
4127 (print_insn_big_mips): Likewise with bfd_getb32 value.
4128 (_print_insn_mips): Now static.
4130 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4132 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4133 gcc memory hog problem with initializer is fixed.
4135 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4137 Merge in support for Mac MPW as a host.
4138 (Old change descriptions retained for informational value.)
4140 * mpw-config.in (archname): Compute from the config.
4141 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4143 * mpw-config.in (target_arch): Compute from canonical target.
4144 (m68k, mips, powerpc, sparc): Add architectures.
4145 * mpw-make.in (disassemble.c.o): Add.
4146 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4148 * mpw-config.in (BFD_MACHINES): Set to a default value.
4149 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4151 * mpw-make.in (CSEARCH): Add extra-include to search path.
4153 * mpw-config.in (varargs.h): Don't create.
4154 (sysdep.h): Create using forward-include.
4155 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4157 * mpw-config.in: New file, MPW version of configure.in.
4158 * mpw-make.in: New file, MPW version of Makefile.in.
4160 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4162 * alpha-dis.c (print_insn_alpha): Put empty statement after
4165 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4167 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4168 (low_sign_extend): Likewise.
4169 (get_field): Delete unused function.
4170 (set_field, deposit_14, deposit_21): Likewise.
4172 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4174 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4177 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4179 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4181 * alpha-opc.h (OSF_ASMCODE): define
4182 print pal-code names as defined in App C of the
4183 Alpha Architecture Reference Manual
4185 * alpha-dis.c: cleaned up output
4186 print stylized code forms as defined in App A.4.3 of the
4187 Alpha Architecture Reference Manual
4189 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4191 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4193 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4196 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4198 * m68k-dis.c (opcode): New function. Returns address of opcode
4199 table entry given index, even if the opcode table was split to
4200 work around gcc bugs.
4201 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4203 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4204 (reg_names): Now const.
4205 (print_insn_arg): Arrays cacheFieldName and names now const.
4206 (print_indexed): Array scales now const.
4208 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4210 * ppc-opc.c: Sort recently added instructions by minor opcode
4211 number within major opcode number.
4213 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4215 * hppa-dis.c: Include libhppa.h.
4217 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4219 * mips-opc.c: Change dli to use M_DLI, and add dla.
4221 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4223 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4225 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4227 * mips-opc.c: Add r4650 mul instruction.
4229 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4231 * mips-opc.c: Add uld and usd macros for unaligned double load and
4234 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4236 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4237 mfdcr, mtdcr, icbt, iccci.
4239 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4241 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4242 signed char fields to shorts, more portable.
4244 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4246 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4247 char fields as signed chars, since they may have negative values.
4249 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4251 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4252 (mycroft@netbsd.org).
4254 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4256 From "Logg, Ed" <elogg@ea.com>:
4257 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4258 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4261 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4263 * ppc-opc.c: Changes based on patch from David Edelsohn
4264 <edelsohn@mhpcc.edu>.
4265 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4268 (insert_tbr): New static function.
4269 (extract_tbr): New static function.
4270 (XFXFXM_MASK, XFXM): Define.
4271 (XSPRBAT_MASK, XSPRG_MASK): Define.
4272 (powerpc_opcodes): Add instructions to access special registers by
4273 name. Add mtcr and mftbu.
4275 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4277 * mips-opc.c (P3): Define.
4278 (mips_opcodes): Add mad and madu.
4280 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4282 * configure.in: Add W65 support.
4283 * disassemble.c: Likewise.
4284 * w65-opc.h, w65-dis.c: New files.
4286 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4288 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4291 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4293 * mips-opc.c: Add dli as a synonym for li.
4295 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4297 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4298 print something for reserved opcode values, even if it won't
4301 * mips-dis.c (_print_insn_mips): When initializing, shift right
4302 and mask, to avoid sign extension problems on the Alpha.
4304 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4307 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4309 * sh-opc.h (mov.l gbr): Get direction right.
4310 * sh-dis.c (print_insn_shx): New function.
4311 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4312 print opcodes with right byte order.
4314 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4316 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4317 to avoid conflicts with getopt.
4319 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4321 * hppa-dis.c (print_insn_hppa): Read the instruction using
4322 bfd_getb32, so that it works on a little endian or 64 bit host.
4323 Remove unused local variable op.
4325 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4327 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4328 addu does not work correctly if -mips3.
4330 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4332 * a29k-dis.c (print_special): Add special register names defined
4333 on 29030, 29040 and 29050.
4334 (print_insn): Handle new operand type 'I'.
4336 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4338 * Makefile.in (INSTALL): Use top level install.sh script.
4340 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4342 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4343 that it works on a little endian host.
4345 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4347 * configure.in: Use ${config_shell} when running config.bfd.
4349 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4351 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4353 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4355 * a29k-dis.c (print_insn): Print the opcode.
4357 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4359 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4361 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4363 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4365 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4367 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4368 which store a value into memory.
4370 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4372 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4373 * arm-dis.c, arm-opc.h: New files.
4375 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4377 * Makefile.in (ns32k-dis.o): Add dependency.
4378 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4379 string, not as array of chars.
4381 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4383 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4385 * sparc-opc.c: Added sparclite extended FP operations, and
4386 versions of v9 impdep* instructions permitting specification of
4389 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4391 * i960-dis.c (reg_names): Now const.
4392 (struct sparse_tabent): New type, copied from array type in mem
4394 (ctrl): Local static array ctrl_tab now const.
4395 (cobr): Local static array cobr_tab now const.
4396 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4397 static variable mem_tab no longer explicitly initialized. Changed
4398 mem_init to const array of struct sparse_tabent.
4399 (reg): Local static variable reg_tab no longer explicitly
4400 initialized. Changed reg_init to const array of struct
4402 (ea): Local static array scale_tab now const.
4404 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4407 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4409 * configure.bat: the disassember needs to be enabled for
4410 "objdump -d" to work in djgpp.
4412 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4414 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4415 (invalid_float): Enabled general version, doesn't require running
4416 on ns32k host. Changed to take char* argument, and test for
4417 explicitly specified sizes, instead of using sizeof() on host CPU
4419 (INVALID_FLOAT): Cast first argument.
4420 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4421 list_P032, list_M032): Now const.
4422 (optlist, list_search): Made appropriate arguments now point to
4424 (print_insn_arg): Changed static array of one-character-string
4425 pointers into a static const array of characters; fixed sprintf
4426 statement accordingly.
4428 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4430 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4431 from distribution. A ns32k-dis.c from a previous distribution has
4432 been brought up to date and supports the new interface.
4434 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4436 * configure.in: add bfd_ns32k_arch target support.
4438 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4439 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4441 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4443 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4446 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4448 * h8300-dis.c, mips-dis.c: Don't use true and false.
4450 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4452 * configure.in: Change --with-targets to --enable-targets.
4454 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4456 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4457 opcodes to the first instruction with that opcode, to speed
4458 disassembly of large files. From ralphc@pyramid.com (Ralph
4461 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4463 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4465 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4467 * configure.bat: update to latest makefile.in
4469 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4471 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4472 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4473 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4474 slot insn is in a delay slot.
4475 * z8k-opc.h: (resflg): Fix patterns.
4476 * h8500-opc.h Fix CR insn patterns.
4478 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4480 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4481 "cmpl" before POWER versions, so that gas -many uses them.
4483 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4485 * disassemble.c: New file.
4486 * Makefile.in (OFILES): Add disassemble.o.
4487 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4488 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4489 binutils/configure.in.
4491 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4492 opcode being examined.
4494 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4496 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4497 (insert_ral, insert_ram, insert_ras): New functions.
4498 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4499 RAS for store with update.
4501 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4503 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4504 (edelsohn@npac.syr.edu).
4506 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4508 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4511 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4513 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4515 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4517 * ppc-opc.c (powerpc_operands): The signedp field has been
4518 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4519 instead. Add new operand SISIGNOPT.
4520 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4521 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4522 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4525 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4527 * i386-dis.c (struct private): Renamed to dis_private. `private'
4528 is a reserved word for dynix cc.
4530 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4532 * configure.in: Change error message to refer to bfd/config.bfd
4533 rather than bfd/configure.in.
4535 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4537 * ppc-opc.c: Define POWER2 as short alias flag.
4538 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4541 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4543 * i960-dis.c (print_insn_i960): Don't read a second word for
4544 opcodes 0, 1, 2 and 3.
4546 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4548 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4550 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4552 * m68881-ext.c: Removed; no longer used.
4553 * Makefile.in: Changed accordingly.
4555 * m68k-dis.c (ext_format_68881): Don't declare.
4556 (print_insn_m68k): If an instruction uses place 'i', it uses at
4557 least four fixed bytes.
4558 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4559 extended float, convert to double using floatformat_to_double, not
4560 ieee_extended_to_double, and fetch the data before converting it.
4562 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4564 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4565 davidj@ICSI.Berkeley.EDU (David Johnson).
4567 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4569 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4570 PowerPC uses bdnz[l][a].
4572 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4574 * dis-buf.c, i386-dis.c: Include sysdep.h.
4576 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4578 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4580 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4581 by Motorola PowerPC 601 with PPC_OPCODE_601.
4582 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4583 Disassemble Motorola PowerPC 601 instructions as well as normal
4584 PowerPC instructions.
4586 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4588 * i960-dis.c (reg, mem): Just use a static array instead of
4591 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4593 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4594 condition name index if this is for a negated condition.
4596 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4597 Floating point format for 'H' operand is backwards from normal
4598 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4599 operands (fmpyadd and fmpysub), handle bizarre register
4600 translation correctly for single precision format.
4602 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4603 or 'I' operands if the next format specifier is 'M' (fcmp
4604 condition completer).
4606 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4608 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4609 single number giving a bitmask for the MB and ME fields of an M
4610 form instruction. Change NB to accept 32, and turn it into 0;
4611 also turn 0 into 32 when disassembling. Seperated SH from NB.
4612 (insert_mbe, extract_mbe): New functions.
4613 (insert_nb, extract_nb): New functions.
4614 (SC_MASK): Mask out SA and LK bits.
4615 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4616 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4617 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4618 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4619 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4620 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4621 (powerpc_macros): Define table of macro definitions.
4622 (powerpc_num_macros): Define.
4624 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4625 if PPC_OPERAND_NEXT is set.
4627 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4629 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4630 char. Retrieve contents using bfd_getl32 instead of shifting.
4632 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4634 * ppc-opc.c: New file. Opcode table for PowerPC, including
4635 opcodes for POWER (RS/6000).
4636 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4637 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4638 (CFILES): Add ppc-dis.c.
4639 (ppc-dis.o, ppc-opc.o): New targets.
4640 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4642 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4644 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4645 No space before 'u', 'f', or 'N'.
4647 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4649 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4650 farther than we should.
4652 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4654 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4656 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4658 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4660 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4661 needs it, to prevent reading past the end of a section.
4663 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4665 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4666 Removed t,A case for la; always use t,A(b) case.
4668 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4670 From Ted Lemen <mellon@pepper.ncd.com>
4671 * mips-dis.c (print_insn_arg): Handle 'k'.
4672 * mips-opc.c: Make cache use k, not t.
4674 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4676 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4677 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4678 FLOAT_FORMAT_CODE to put out floating point register names.
4680 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4682 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4684 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4686 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4688 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4690 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4691 larger than 32. Moved dsxx32 variants first for disassembler.
4693 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4695 * z8kgen.c, z8k-opc.h: Add full lda information.
4697 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4699 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4700 movb instructions. Any necessary space will be emitted by
4701 the code to handle nullification completers.
4703 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4705 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4707 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4709 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4710 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4712 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4714 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4716 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4718 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4719 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4721 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4723 * m88k-dis.c (m88kdis): comment change. Remove space after
4725 (printop): handle new arg types DEC and XREG for m88110.
4727 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4729 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4730 type for absolute branch addresses. Delete special
4731 "ble" and "be" code in 'W' operand code.
4733 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4735 * mips-opc.c: Set hazard information correctly for branch
4736 likely instructions.
4738 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4740 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4741 info->fprintf_func for printing and info->print_address_func for
4744 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4746 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4748 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4750 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4751 Corrected second case of "b" for disassembler.
4753 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4755 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4756 to BFD swapping routines to correspond to BFD name changes.
4758 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4760 * mips-opc.c: Change div machine instruction to be z,s,t rather
4761 than s,t. Change div macro to be d,v,t rather than d,s,t.
4762 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4763 rem and remu which generates only the corresponding div
4764 instruction. This is for compatibility with the MIPS assembler,
4765 which only generates the simple machine instruction when an
4766 explicit destination of $0 is used.
4767 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4769 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4771 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4772 WR_31 hazard for bal, bgezal, bltzal.
4774 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4776 * hppa-dis.c (print_insn_hppa): Use print function
4777 from within the disassemble_info, not fprintf_filtered.
4779 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4781 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4782 Law, law@cs.utah.edu.)
4784 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4786 * mips-opc.c ("absu"): Removed.
4789 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4791 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4792 Changed hazard information to distinguish between memory load
4793 delays and coprocessor load delays.
4795 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4797 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4799 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4801 * configure.in: Don't pass cpu to config.bfd.
4803 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4805 * m88k-dis.c (m88kdis): Make class unsigned.
4807 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4809 * alpha-dis.c (print_insn_alpha): One branch format case was
4810 missing the instruction name.
4812 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4814 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4815 Add the arch-specific auxiliary files.
4816 (OFILES): Remove the arch-specific auxiliary files
4817 and use BFD_MACHINES instead of DIS_LIBS.
4818 * configure.in: Set BFD_MACHINES based on --with-targets option.
4820 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4822 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4825 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4827 * sparc-opc.c: Change CONST to const to deal with gcc
4828 -Dconst=__const -traditional.
4830 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4832 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4833 coprocessor instructions out of #if 0, and made them use new
4836 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4838 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4840 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4842 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4843 instruction, for use by the disassembler.
4845 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4846 hand-coded sign extensions that depended on 32-bit host ints.
4847 FIXME, we still depend on big-endian host bitfield ordering.
4848 (sparc_print_insn): Set the insn_info_valid field, and the
4849 other fields that describe the instruction being printed.
4851 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4853 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4854 `jmp' instead of just one of them.
4856 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4858 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4859 (fput_fp_reg_r): Renamed from fput_reg_r.
4860 (fput_fp_reg): New function.
4861 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4863 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4865 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4867 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4869 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4871 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4872 don't output a space.
4874 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4876 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4878 * mips-opc.c: New file, containing opcode table from
4879 ../include/opcode/mips.h.
4880 * Makefile.in: Add it.
4882 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4884 * m88k-dis.c: New file, moved in from gdb and changed to use the
4885 new dis-asm.h disassembler interface.
4886 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4887 (m88k-dis.o): New target.
4889 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4891 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4892 argument string const char * to correspond to opcode/mips.h.
4894 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4896 * mips-dis.c: Updated to account for name changes in new version
4898 * Makefile.in: Added header file dependencies.
4900 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4902 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4904 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4906 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4907 extend, rather than shifts.
4909 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4911 * Makefile.in: Undo 15 June change.
4913 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4915 * m68k-dis.c (print_insn_arg): Change return value to byte count
4917 * m68k-dis.c: Re-write to detect invalid operands before
4918 printing anything, so we can handle this the same way we
4919 handle invalid opcodes.
4921 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4923 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4925 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4927 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4930 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4932 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4934 * configure.in: Do make sysdep.h link.
4935 * Makefile.in: Search ../include. Don't search ../bfd.
4937 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4939 Changes from Jeff Law, law@cs.utah.edu:
4940 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4941 Do not print a space before the completers specified by
4944 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4946 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4947 defined, since gdb has been fixed.
4949 Changes from Jeff Law, law@cs.utah.edu:
4950 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4951 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4952 be a *disassemble_info, not a *FILE.
4953 * hppa-dis.c: Support 'd', '!', and 'a'.
4954 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4955 * hppa-dis.c: Delete cases which are no longer needed.
4957 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4959 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4961 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4963 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4966 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4968 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4969 * configure.in: No longer need to configure to get sysdep.h.
4971 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4973 * Patches from Jeffrey Law <law@cs.utah.edu>.
4974 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4975 templates for 1.1 FP computational instructions.
4977 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4979 * h8500-dis.c (print_insn_h8500): Address argument is type
4981 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4984 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4985 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4987 * sparc-dis.c (compare_opcodes): Move static declaration to
4990 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4992 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4993 instruction, remove unimp hack from 'l' argument.
4995 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4997 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5000 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5002 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5003 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5006 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5008 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5009 arrays of string pointers to 2-d arrays of chars, to save
5012 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5014 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5015 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5017 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5019 * hppa-dis.c: New file from Utah, adapted to new disassembler
5021 * Makefile.in: Include it.
5023 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5025 * sh-dis.c, sh-opc.h: New files.
5027 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5029 * alpha-dis.c, alpha-opc.h: New files.
5031 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5033 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5036 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5038 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5040 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5042 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5045 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5047 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5048 and double percent signs a few places.
5050 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5052 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5053 Use info->print_address_func not print_address.
5055 * dis-buf.c (generic_print_address): New function.
5057 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5059 * Makefile.in: Add sparc-dis.c.
5060 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5062 Add `add' instruction to the set that get checked
5063 for a preceding `sethi' in order to print an absolute address.
5064 * (print_insn): Disassembly prefers real instructions.
5065 (is_delayed_branch): Speed up.
5066 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5067 Still missing some float ops, and needs testing.
5068 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5069 F_ALIAS. Use printf, not fprintf, when not passing a file
5071 (compare_opcodes): Check that identical instructions have
5072 identical opcodes, complain otherwise.
5075 * Include reg_names.
5077 Use dis-asm.h/read_memory_func interface.
5079 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5081 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5082 deliberately return non-zero to setjmp from longjmp. Otherwise
5083 this code fails to compile.
5085 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5087 * m68k-dis.c: Fix prototype for fetch_arg().
5089 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5091 * dis-buf.c: New file, for new read_memory_func interface.
5092 Makefile.in (OFILES): Include it.
5093 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5094 Use new read_memory_func interface.
5096 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5098 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5099 * h8500-opc.h: Fix couple of opcodes.
5101 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5103 * Makefile.in: add dvi & installcheck targets
5105 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5107 * Makefile.in: Update for h8500-dis.c.
5109 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5111 * h8500-dis.c, h8500-opc.h: New files
5113 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5115 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5116 ../include/dis-asm.h.
5117 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5118 and ../gdb/m68k-pinsn.c).
5119 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5120 and ../gdb/i386-pinsn.c).
5121 * m68881-ext.c: New file. Moved definition of
5122 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5123 * Makefile.in: Adjust for new files.
5124 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5125 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5126 can be dis-assembled.
5128 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5130 * mips-dis.c (print_insn_arg): Now returns void.
5132 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5134 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5135 files that use the macros.
5137 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5139 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5140 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5141 (CFILES): Added mips-dis.c.
5143 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5145 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5146 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5148 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5150 * Makefile.in: Improve *clean rules.
5151 * configure.in: Allow a default host.
5153 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5155 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5156 files include other sysdep files
5158 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5160 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5162 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5164 * configure.in: For host support, use ../bfd/configure.host
5165 so it stays in sync with the ../bfd/hosts database.
5167 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5169 * configure.in: use cpu-vendor-os triple instead of nested cases
5171 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5173 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5174 *always* the wrong one.
5176 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5178 * z8kgen.c: added copyright info
5180 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5182 * z8k-dis.c (unparse_instr): prettier tabs
5183 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5185 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5187 * configure.in: Add ncr* configuration.
5188 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5189 picayune ANSI compilers happy.
5191 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5193 * configure.in (i386): Make i386 and i486 synonymous for now.
5194 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5196 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5198 * Makefile.in (install): Fix typo.
5200 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5202 * Makefile.in (make): Remove obsolete crud.
5203 (sparc-opc.o): Avoid Sun Make VPATH bug.
5205 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5207 * Makefile.in: since there are no SUBDIRS, remove rule and
5208 references of subdir_do.
5210 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5212 * Makefile.in (install): Get the library name right here too.
5213 Don't install bfd.h, since it's unrelated to this library. No
5214 subdirs to recurse into, either.
5215 (CFILES): The source file has a .c suffix, not .o.
5217 * sparc-opc.c: New file, moved from BFD.
5218 * Makefile.in (OFILES): Build it.
5220 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5222 * z8k-dis.c: fixed forward refferences of some declarations.
5224 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5226 * Makefile.in: get the name of the library right
5228 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5230 * z8k-dis.c: knows how to disassemble z8k stuff
5231 * z8k-opc.h: new file full of z8000 opcodes
5235 version-control: never