1 2012-08-13 Maciej W. Rozycki <macro@codesourcery.com>
3 * micromips-opc.c (micromips_opcodes): Update comment.
4 * mips-opc.c (mips_builtin_opcodes): Likewise. Mark coprocessor
5 instructions for IOCT as appropriate.
6 * mips-dis.c (print_insn_mips): Replace OPCODE_IS_MEMBER with
8 * configure.in: Substitute NO_WMISSING_FIELD_INITIALIZERS with
9 the result of a check for the -Wno-missing-field-initializers
11 * Makefile.am (NO_WMISSING_FIELD_INITIALIZERS): New variable.
12 (mips-opc.lo): Pass $(NO_WMISSING_FIELD_INITIALIZERS) to
14 (mips16-opc.lo): Likewise.
15 (micromips-opc.lo): Likewise.
16 * aclocal.m4: Regenerate.
17 * configure: Regenerate.
18 * Makefile.in: Regenerate.
20 2012-08-11 Saravanan Ekanathan <saravanan.ekanathan@amd.com>
23 * i386-gen.c (cpu_flag_init): Add CpuFMA in CPU_BDVER2_FLAGS.
24 * i386-init.h: Regenerated.
26 2012-08-09 Nick Clifton <nickc@redhat.com>
28 * po/vi.po: Updated Vietnamese translation.
30 2012-08-07 Roland McGrath <mcgrathr@google.com>
32 * i386-dis.c (reg_table): Fill out REG_0F0D table with
33 AMD-reserved cases as "prefetch".
34 (MOD_0F18_REG_4, MOD_0F18_REG_5): New enum constants.
35 (MOD_0F18_REG_6, MOD_0F18_REG_7): Likewise.
36 (reg_table): Use those under REG_0F18.
37 (mod_table): Add those cases as "nop/reserved".
39 2012-08-07 Jan Beulich <jbeulich@suse.com>
41 * i386-opc.tbl: Remove "FIXME" comments from SVME instructions.
43 2012-08-06 Roland McGrath <mcgrathr@google.com>
45 * i386-dis.c (print_insn): Print spaces between multiple excess
46 prefixes. Return actual number of excess prefixes consumed,
49 * i386-dis.c (OP_REG): Ignore REX_B for segment register cases.
51 2012-08-06 Roland McGrath <mcgrathr@google.com>
52 Victor Khimenko <khim@google.com>
53 H.J. Lu <hongjiu.lu@intel.com>
55 * i386-dis.c (OP_sI): In b_T_mode and v_mode, REX_W trumps DFLAG.
56 (putop): For 'T', 'U', and 'V', treat REX_W like DFLAG.
57 (intel_operand_size): For stack_v_mode, treat REX_W like DFLAG.
58 (OP_E_register): Likewise.
59 (OP_REG): For low 8 whole registers, treat REX_W like DFLAG.
61 2012-08-02 Jan-Benedict Glaw <jbglaw@lug-owl.de>
63 * configure.in: Formatting.
64 * configure: Regenerate.
66 2012-08-01 Alan Modra <amodra@gmail.com>
68 * h8300-dis.c: Fix printf arg warnings.
69 * i960-dis.c: Likewise.
70 * mips-dis.c: Likewise.
71 * pdp11-dis.c: Likewise.
73 * v850-dis.c: Likewise.
74 * configure.in: Formatting.
75 * configure: Regenerate.
76 * rl78-decode.c: Regenerate.
77 * po/POTFILES.in: Regenerate.
79 2012-07-31 Chao-Ying Fu <fu@mips.com>
80 Catherine Moore <clm@codesourcery.com>
81 Maciej W. Rozycki <macro@codesourcery.com>
83 * micromips-opc.c (WR_a, RD_a, MOD_a): New macros.
86 (micromips_opcodes): Add DSP ASE instructions.
87 * mips-dis.c (print_insn_micromips) <'2', '3'>: New cases.
88 <'4', '5', '6', '7', '8', '0', '^', '@'>: Likewise.
90 2012-07-31 Jan Beulich <jbeulich@suse.com>
92 * i386-opc.tbl (vmovntdqa): Move up into 256-bit integer AVX2
93 instruction group. Mark as requiring AVX2.
94 * i386-tbl.h: Re-generate.
96 2012-07-30 Nick Clifton <nickc@redhat.com>
98 * po/opcodes.pot: Updated template.
99 * po/es.po: Updated Spanish translation.
100 * po/fi.po: Updated Finnish translation.
102 2012-07-27 Mike Frysinger <vapier@gentoo.org>
104 * configure.in (BFD_VERSION): Run bfd/configure --version and
105 parse the output of that.
106 * configure: Regenerate.
108 2012-07-25 James Lemke <jwlemke@codesourcery.com>
110 * ppc-opc.c (powerpc_opcodes): Add/remove PPCVLE for some 32-bit insns.
112 2012-07-24 Stephan McCamant <smcc@cs.berkeley.edu>
113 Dr David Alan Gilbert <dave@treblig.org>
116 * arm-dis.c: Add necessary casts for printing integer values.
117 Use %s when printing string values.
118 * hppa-dis.c: Likewise.
119 * m68k-dis.c: Likewise.
120 * microblaze-dis.c: Likewise.
121 * mips-dis.c: Likewise.
122 * sparc-dis.c: Likewise.
124 2012-07-19 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
127 * i386-dis.c (VEX_LEN_0FXOP_08_CC): New.
128 (VEX_LEN_0FXOP_08_CD): Likewise.
129 (VEX_LEN_0FXOP_08_CE): Likewise.
130 (VEX_LEN_0FXOP_08_CF): Likewise.
131 (VEX_LEN_0FXOP_08_EC): Likewise.
132 (VEX_LEN_0FXOP_08_ED): Likewise.
133 (VEX_LEN_0FXOP_08_EE): Likewise.
134 (VEX_LEN_0FXOP_08_EF): Likewise.
135 (xop_table): Fix entries for vpcomb, vpcomw, vpcomd, vpcomq,
136 vpcomub, vpcomuw, vpcomud, vpcomuq.
137 (vex_len_table): Add entries for VEX_LEN_0FXOP_08_CC,
138 VEX_LEN_0FXOP_08_CD, VEX_LEN_0FXOP_08_CE, VEX_LEN_0FXOP_08_CF,
139 VEX_LEN_0FXOP_08_EC, VEX_LEN_0FXOP_08_ED, VEX_LEN_0FXOP_08_EE,
142 2012-07-16 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
144 * i386-dis.c (PREFIX_0F38F6): New.
145 (prefix_table): Add adcx, adox instructions.
146 (three_byte_table): Use PREFIX_0F38F6.
147 (mod_table): Add rdseed instruction.
148 * i386-gen.c (cpu_flag_init): Add CpuADX, CpuRDSEED, CpuPRFCHW.
149 (cpu_flags): Likewise.
150 * i386-opc.h: Add CpuADX, CpuRDSEED, CpuPRFCHW.
151 (i386_cpu_flags): Add fields cpurdseed, cpuadx, cpuprfchw.
152 * i386-opc.tbl: Add instrcutions adcx, adox, rdseed. Extend
154 * i386-tbl.h: Regenerate.
155 * i386-init.h: Likewise.
157 2012-07-05 Thomas Schwinge <thomas@codesourcery.com>
159 * mips-dis.c: Remove gratuitous newline.
161 2012-07-05 Sean Keys <skeys@ipdatasys.com>
163 * xgate-dis.c: Removed an IF statement that will
164 always be false due to overlapping operand masks.
165 * xgate-opc.c: Corrected 'com' opcode entry and
168 2012-07-02 Roland McGrath <mcgrathr@google.com>
170 * i386-opc.tbl: Add RepPrefixOk to nop.
171 * i386-tbl.h: Regenerate.
173 2012-06-28 Nick Clifton <nickc@redhat.com>
175 * po/vi.po: Updated Vietnamese translation.
177 2012-06-22 Roland McGrath <mcgrathr@google.com>
179 * i386-opc.tbl: Add RepPrefixOk to ret.
180 * i386-tbl.h: Regenerate.
182 * i386-opc.h (RepPrefixOk): New enum constant.
183 (i386_opcode_modifier): New bitfield 'repprefixok'.
184 * i386-gen.c (opcode_modifiers): Add RepPrefixOk.
185 * i386-opc.tbl: Add RepPrefixOk to bsf, bsr, and to all
186 instructions that have IsString.
187 * i386-tbl.h: Regenerate.
189 2012-06-11 Andreas Schwab <schwab@linux-m68k.org>
191 * ppc-opc.c (lvsl, lvebx, isellt, icbt, ldepx, lwepx, lvsr, lvehx)
192 (iselgt, lvewx, iseleq, isel, dcbst, dcbstep, dcbfl, dcbf, lbepx)
193 (lvx, dcbfep, dcbtstls, stvebx, dcbtstlse, stdepx, stwepx, dcbtls)
194 (stvehx, dcbtlse, stvewx, stbepx, icblc, stvx, dcbtstt, dcbtst)
195 (dcbtst, dcbtstep, dcbtt, dcbt, dcbt, lhepx, eciwx, dcbtep)
196 (dcread, lxvdsx, lvxl, dcblc, sthepx, ecowx, dcbi, dcread, icbtls)
197 (stvxl, lxsdx, lfdepx, stxsdx, stfdepx, dcba, dcbal, lxvw4x)
198 (tlbivax, lfdpx, lxvd2x, tlbsrx., stxvw4x, tlbsx, tlbsx., stfdpx)
199 (stfqx, stxvd2x, icbi, icbiep, icread, dcbzep): Change RA to RA0.
201 2012-05-19 Alan Modra <amodra@gmail.com>
203 * ppc-dis.c: Don't include elf32-ppc.h, do include elf/ppc.h.
204 (get_powerpc_dialect): Detect VLE sections from ELF sh_flags.
206 2012-05-18 Alan Modra <amodra@gmail.com>
208 * ia64-opc.c: Remove #include "ansidecl.h".
209 * z8kgen.c: Include sysdep.h first.
211 * arc-dis.c: Include sysdep.h first, remove some redundant includes.
212 * bfin-dis.c: Likewise.
213 * i860-dis.c: Likewise.
214 * ia64-dis.c: Likewise.
215 * ia64-gen.c: Likewise.
216 * m68hc11-dis.c: Likewise.
217 * mmix-dis.c: Likewise.
218 * msp430-dis.c: Likewise.
219 * or32-dis.c: Likewise.
220 * rl78-dis.c: Likewise.
221 * rx-dis.c: Likewise.
222 * tic4x-dis.c: Likewise.
223 * tilegx-opc.c: Likewise.
224 * tilepro-opc.c: Likewise.
225 * rx-decode.c: Regenerate.
227 2012-05-17 James Lemke <jwlemke@codesourcery.com>
229 * ppc-opc.c (powerpc_macros): Add entries for e_extlwi to e_clrlslwi.
231 2012-05-17 James Lemke <jwlemke@codesourcery.com>
233 * ppc-opc.c (extract_sprg): Use ALLOW8_SPRG to include VLE.
235 2012-05-17 Daniel Richard G. <skunk@iskunk.org>
236 Nick Clifton <nickc@redhat.com>
239 * configure.in: Add check that sysdep.h has been included before
240 any system header files.
241 * configure: Regenerate.
242 * config.in: Regenerate.
243 * sysdep.h: Generate an error if included before config.h.
244 * alpha-opc.c: Include sysdep.h before any other header file.
245 * alpha-dis.c: Likewise.
246 * avr-dis.c: Likewise.
247 * cgen-opc.c: Likewise.
248 * cr16-dis.c: Likewise.
249 * cris-dis.c: Likewise.
250 * crx-dis.c: Likewise.
251 * d10v-dis.c: Likewise.
252 * d10v-opc.c: Likewise.
253 * d30v-dis.c: Likewise.
254 * d30v-opc.c: Likewise.
255 * h8500-dis.c: Likewise.
256 * i370-dis.c: Likewise.
257 * i370-opc.c: Likewise.
258 * m10200-dis.c: Likewise.
259 * m10300-dis.c: Likewise.
260 * micromips-opc.c: Likewise.
261 * mips-opc.c: Likewise.
262 * mips61-opc.c: Likewise.
263 * moxie-dis.c: Likewise.
264 * or32-opc.c: Likewise.
265 * pj-dis.c: Likewise.
266 * ppc-dis.c: Likewise.
267 * ppc-opc.c: Likewise.
268 * s390-dis.c: Likewise.
269 * sh-dis.c: Likewise.
270 * sh64-dis.c: Likewise.
271 * sparc-dis.c: Likewise.
272 * sparc-opc.c: Likewise.
273 * spu-dis.c: Likewise.
274 * tic30-dis.c: Likewise.
275 * tic54x-dis.c: Likewise.
276 * tic80-dis.c: Likewise.
277 * tic80-opc.c: Likewise.
278 * tilegx-dis.c: Likewise.
279 * tilepro-dis.c: Likewise.
280 * v850-dis.c: Likewise.
281 * v850-opc.c: Likewise.
282 * vax-dis.c: Likewise.
283 * w65-dis.c: Likewise.
284 * xgate-dis.c: Likewise.
285 * xtensa-dis.c: Likewise.
286 * rl78-decode.opc: Likewise.
287 * rl78-decode.c: Regenerate.
288 * rx-decode.opc: Likewise.
289 * rx-decode.c: Regenerate.
291 2012-05-17 Alan Modra <amodra@gmail.com>
293 * ppc_dis.c: Don't include elf/ppc.h.
295 2012-05-16 Meador Inge <meadori@codesourcery.com>
297 * arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
300 2012-05-15 James Murray <jsm@jsm-net.demon.co.uk>
301 Stephane Carrez <stcarrez@nerim.fr>
303 * configure.in: Add S12X and XGATE co-processor support to m68hc11
305 * disassemble.c: Likewise.
306 * configure: Regenerate.
307 * m68hc11-dis.c: Make objdump output more consistent, use hex
308 instead of decimal and use 0x prefix for hex.
309 * m68hc11-opc.c: Add S12X and XGATE opcodes.
311 2012-05-14 James Lemke <jwlemke@codesourcery.com>
313 * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
314 (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
315 (vle_opcd_indices): New array.
316 (lookup_vle): New function.
317 (disassemble_init_powerpc): Revise for second (VLE) opcode table.
318 (print_insn_powerpc): Likewise.
319 * ppc-opc.c: Likewise.
321 2012-05-14 Catherine Moore <clm@codesourcery.com>
322 Maciej W. Rozycki <macro@codesourcery.com>
323 Rhonda Wittels <rhonda@codesourcery.com>
324 Nathan Froyd <froydnj@codesourcery.com>
326 * ppc-opc.c (insert_arx, extract_arx): New functions.
327 (insert_ary, extract_ary): New functions.
328 (insert_li20, extract_li20): New functions.
329 (insert_rx, extract_rx): New functions.
330 (insert_ry, extract_ry): New functions.
331 (insert_sci8, extract_sci8): New functions.
332 (insert_sci8n, extract_sci8n): New functions.
333 (insert_sd4h, extract_sd4h): New functions.
334 (insert_sd4w, extract_sd4w): New functions.
335 (insert_vlesi, extract_vlesi): New functions.
336 (insert_vlensi, extract_vlensi): New functions.
337 (insert_vleui, extract_vleui): New functions.
338 (insert_vleil, extract_vleil): New functions.
339 (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
340 (BI16, BI32, BO32, B8): New.
341 (B15, B24, CRD32, CRS): New.
342 (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
343 (DB, IMM20, RD, Rx, ARX, RY, RZ): New.
344 (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
345 (SH6_MASK): Use PPC_OPSHIFT_INV.
346 (SI8, UI5, OIMM5, UI7, BO16): New.
347 (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
348 (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
350 (insert_sprg, extract_sprg): Check ALLOW8_SPRG.
351 (OPVUP, OPVUP_MASK OPVUP): New
352 (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
353 (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
354 (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
355 (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
356 (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
357 (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
358 (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
359 (SE_IM5, SE_IM5_MASK): New.
360 (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
361 (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
362 (BO32DNZ, BO32DZ): New.
363 (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
365 (powerpc_opcodes): Add new VLE instructions. Update existing
366 instruction to include PPCVLE if supported.
367 * ppc-dis.c (ppc_opts): Add vle entry.
368 (get_powerpc_dialect): New function.
369 (powerpc_init_dialect): VLE support.
370 (print_insn_big_powerpc): Call get_powerpc_dialect.
371 (print_insn_little_powerpc): Likewise.
372 (operand_value_powerpc): Handle negative shift counts.
373 (print_insn_powerpc): Handle 2-byte instruction lengths.
375 2012-05-11 Daniel Richard G. <skunk@iskunk.org>
378 * configure.in: Invoke ACX_HEADER_STRING.
379 * configure: Regenerate.
380 * config.in: Regenerate.
381 * sysdep.h: If STRINGS_WITH_STRING is defined then include both
382 string.h and strings.h.
384 2012-05-11 Nick Clifton <nickc@redhat.com>
387 * arm-dis.c (print_insn): Fix detection of instruction mode in
388 files containing multiple executable sections.
390 2012-05-03 Sean Keys <skeys@ipdatasys.com>
392 * Makefile.in, configure: regenerate
393 * disassemble.c (disassembler): Recognize ARCH_XGATE.
394 * xgate-dis.c (read_memory, print_insn, print_insn_xgate):
396 * configure.in: Recognize xgate.
397 * xgate-dis.c, xgate-opc.c: New files for support of xgate
398 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
399 and opcode generation for xgate.
401 2012-04-30 DJ Delorie <dj@redhat.com>
403 * rx-decode.opc (MOV): Do not sign-extend immediates which are
404 already the maximum bit size.
405 * rx-decode.c: Regenerate.
407 2012-04-27 David S. Miller <davem@davemloft.net>
409 * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
410 * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
412 * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
413 * sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
415 * sparc-opc.c (CBCOND): New define.
416 (CBCOND_XCC): Likewise.
417 (cbcond): New helper macro.
418 (sparc_opcodes): Add compare-and-branch instructions.
420 * sparc-dis.c (print_insn_sparc): Handle ')'.
421 * sparc-opc.c (sparc_opcodes): Add crypto instructions.
423 * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
424 into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
426 2012-04-12 David S. Miller <davem@davemloft.net>
428 * sparc-dis.c (X_DISP10): Define.
429 (print_insn_sparc): Handle '='.
431 2012-04-01 Mike Frysinger <vapier@gentoo.org>
433 * bfin-dis.c (fmtconst): Replace decimal handling with a single
434 sprintf call and the '*' field width.
436 2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
438 * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
440 2012-03-16 Alan Modra <amodra@gmail.com>
442 * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
443 (powerpc_opcd_indices): Bump array size.
444 (disassemble_init_powerpc): Set powerpc_opcd_indices entries
445 corresponding to unused opcodes to following entry.
446 (lookup_powerpc): New function, extracted and optimised from..
447 (print_insn_powerpc): ..here.
449 2012-03-15 Alan Modra <amodra@gmail.com>
450 James Lemke <jwlemke@codesourcery.com>
452 * disassemble.c (disassemble_init_for_target): Handle ppc init.
453 * ppc-dis.c (private): New var.
454 (powerpc_init_dialect): Don't return calloc failure, instead use
456 (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
457 (powerpc_opcd_indices): New array.
458 (disassemble_init_powerpc): New function.
459 (print_insn_big_powerpc): Don't init dialect here.
460 (print_insn_little_powerpc): Likewise.
461 (print_insn_powerpc): Start search using powerpc_opcd_indices.
463 2012-03-10 Edmar Wienskoski <edmar@freescale.com>
465 * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
466 * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
467 (PPCVEC2, PPCTMR, E6500): New short names.
468 (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
469 mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
470 lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
471 lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
472 lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
473 optional operands on sync instruction for E6500 target.
475 2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
477 * s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
479 2012-02-27 Alan Modra <amodra@gmail.com>
481 * mt-dis.c: Regenerate.
483 2012-02-27 Alan Modra <amodra@gmail.com>
485 * v850-opc.c (extract_v8): Rearrange to make it obvious this
486 is the inverse of corresponding insert function.
487 (extract_d22, extract_u9, extract_r4): Likewise.
488 (extract_d9): Correct sign extension.
489 (extract_d16_15): Don't assume "long" is 32 bits, and don't
490 rely on implementation defined behaviour for shift right of
492 (extract_d16_16, extract_d17_16, extract_i9): Likewise.
493 (extract_d23): Likewise, and correct mask.
495 2012-02-27 Alan Modra <amodra@gmail.com>
497 * crx-dis.c (print_arg): Mask constant to 32 bits.
498 * crx-opc.c (cst4_map): Use int array.
500 2012-02-27 Alan Modra <amodra@gmail.com>
502 * arc-dis.c (BITS): Don't use shifts to mask off bits.
503 (FIELDD): Sign extend with xor,sub.
505 2012-02-25 Walter Lee <walt@tilera.com>
507 * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
508 * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
509 TILEPRO_OPC_LW_TLS_SN.
511 2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
513 * i386-opc.h (HLEPrefixNone): New.
514 (HLEPrefixLock): Likewise.
515 (HLEPrefixAny): Likewise.
516 (HLEPrefixRelease): Likewise.
518 2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
520 * i386-dis.c (HLE_Fixup1): New.
521 (HLE_Fixup2): Likewise.
522 (HLE_Fixup3): Likewise.
529 (MOD_C6_REG_7): Likewise.
530 (MOD_C7_REG_7): Likewise.
531 (RM_C6_REG_7): Likewise.
532 (RM_C7_REG_7): Likewise.
533 (XACQUIRE_PREFIX): Likewise.
534 (XRELEASE_PREFIX): Likewise.
535 (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
536 cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
537 Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
538 (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
539 not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
540 MOD_C6_REG_7 and MOD_C7_REG_7.
541 (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
542 (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
544 (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
545 (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
547 * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
549 (cpu_flags): Add CpuHLE and CpuRTM.
550 (opcode_modifiers): Add HLEPrefixOk.
552 * i386-opc.h (CpuHLE): New.
554 (HLEPrefixOk): Likewise.
555 (i386_cpu_flags): Add cpuhle and cpurtm.
556 (i386_opcode_modifier): Add hleprefixok.
558 * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
559 add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
560 sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
561 operand. Add xacquire, xrelease, xabort, xbegin, xend and
563 * i386-init.h: Regenerated.
564 * i386-tbl.h: Likewise.
566 2012-01-24 DJ Delorie <dj@redhat.com>
568 * rl78-decode.opc (rl78_decode_opcode): Add NOT1.
569 * rl78-decode.c: Regenerate.
571 2012-01-17 James Murray <jsm@jsm-net.demon.co.uk>
574 * cr16-dis.c (print_arg): Test symtab_size not num_symbols.
576 2012-01-17 Andreas Schwab <schwab@linux-m68k.org>
578 * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
579 register and move them after pmove with PSR/PCSR register.
581 2012-01-13 H.J. Lu <hongjiu.lu@intel.com>
583 * i386-dis.c (mod_table): Add vmfunc.
585 * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
586 (cpu_flags): CpuVMFUNC.
588 * i386-opc.h (CpuVMFUNC): New.
589 (i386_cpu_flags): Add cpuvmfunc.
591 * i386-opc.tbl: Add vmfunc.
592 * i386-init.h: Regenerated.
593 * i386-tbl.h: Likewise.
595 For older changes see ChangeLog-2011
601 version-control: never