opcodes/ChangeLog

   1 2009-11-06  Sebastian Pop  <sebastian.pop@amd.com>
   2
   3         * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
   4         reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
   5         B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
   6         the xop_table.
   7         (get_valid_dis386): Removed unused condition (from cut/n/paste) for
   8         XOP instructions.
   9
  10 2009-11-05  Sebastian Pop  <sebastian.pop@amd.com>
  11             Quentin Neill  <quentin.neill@amd.com>
  12
  13         * opcodes/i386-dis.c (OP_LWPCB_E): New.
  14         (OP_LWP_E): New.
  15         (OP_LWP_I): New.
  16         (USE_XOP_8F_TABLE): New.
  17         (XOP_8F_TABLE): New.
  18         (REG_XOP_LWPCB): New.
  19         (REG_XOP_LWP): New.
  20         (XOP_09): New.
  21         (XOP_0A): New.
  22         (reg_table): Redirect REG_8F to XOP_8F_TABLE.
  23         Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
  24         (xop_table): New.
  25         (get_valid_dis386): Handle USE_XOP_8F_TABLE.
  26         Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
  27         to access to the vex_table.
  28         (OP_LWPCB_E): New.
  29         (OP_LWP_E): New.
  30         (OP_LWP_I): New.
  31         * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
  32         (cpu_flags): Add CpuLWP.
  33         (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
  34         * opcodes/i386-opc.h (CpuLWP): New.
  35         (i386_cpu_flags): Add bit cpulwp.
  36         (VexLWP): New.
  37         (XOP09): New.
  38         (XOP0A): New.
  39         (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
  40         * opcodes/i386-opc.tbl (llwpcb): Added.
  41         (lwpval): Added.
  42         (lwpins): Added.
  43
  44 2009-11-04  DJ Delorie  <dj@redhat.com>
  45
  46         * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
  47         (mvtcp, mvfcp, opecp): Remove.
  48         * rx-decode.c: Regenerate.
  49         * rx-dis.c (cpen): Remove.
  50
  51 2009-11-03  Doug Evans  <dje@sebabeach.org>
  52
  53         * m32c-desc.c: Regenerate.
  54         * mep-desc.c: Regenerate.
  55
  56 2009-11-02  Paul Brook  <paul@codesourcery.com>
  57
  58         * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
  59         Add VFPv4 instructions.
  60
  61 2009-10-29  Sebastian Pop  <sebastian.pop@amd.com>
  62
  63         * i386-dis.c (OP_VEX_FMA): Removed.
  64         (VexFMA): Removed.
  65         (Vex128FMA): Removed.
  66         (prefix_table): First source operand of FMA4 insns is decoded
  67         with Vex not with VexFMA.
  68         (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
  69         when vex.w is set.  Third source operand is decoded with
  70
  71 2009-10-27  Alan Modra  <amodra@bigpond.net.au>
  72
  73         * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
  74         * Makefile.in: Regenerate.
  75         * po/POTFILES.in: Regenerate.
  76
  77 2009-10-23  Doug Evans  <dje@sebabeach.org>
  78
  79         * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
  80         * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
  81         * cgen-bitset.c: Update.
  82         * fr30-desc.h: Regenerate.
  83         * frv-desc.h: Regenerate.
  84         * ip2k-desc.h: Regenerate.
  85         * iq2000-desc.h: Regenerate.
  86         * lm32-desc.h: Regenerate.
  87         * m32c-desc.h: Regenerate.
  88         * m32c-opc.h: Regenerate.
  89         * m32r-desc.h: Regenerate.
  90         * mep-desc.h: Regenerate.
  91         * mt-desc.h: Regenerate.
  92         * openrisc-desc.h: Regenerate.
  93         * xc16x-desc.h: Regenerate.
  94         * xstormy16-desc.h: Regenerate.
  95
  96 2009-10-22  DJ Delorie  <dj@redhat.com>
  97
  98         * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
  99         * rx-decode.c: Regenerated.
 100
 101 2009-10-20  H.J. Lu  <hongjiu.lu@intel.com>
 102
 103         PR gas/10775
 104         * i386-dis.c: Document LB, LS and LV macros.
 105         (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
 106         with the 64-bit displacement or immediate operand.
 107         (putop): Handle LB, LS and LV macros.
 108
 109 2009-10-18  Doug Evans  <dje@sebabeach.org>
 110
 111         * lm32-opinst.c: Regenerate.
 112         * m32c-desc.c: Regenerate.
 113         * m32r-opinst.c: Regenerate.
 114         * openrisc-ibld.c: Regenerate.
 115         * xc16x-desc.c: Regenerate.
 116         * xc16x-desc.h: Regenerate.
 117
 118 2009-10-17  Doug Evans  <dje@sebabeach.org>
 119
 120         * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
 121         (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
 122         sorted alphabetically.
 123         (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
 124         stamp-* rules are sorted alphabetically.
 125         * Makefile.in: Regenerate.
 126
 127 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 128
 129         * i386-opc.h: Use enum instead of nested macros.
 130
 131 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 132
 133         * i386-dis.c: Simplify enums.
 134
 135 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 136             Ineiev <ineiev@gmail.com>
 137
 138         PR binutils/10767
 139         * i386-dis.c: Use enum instead of nested macros.
 140
 141 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 142
 143         * i386-dis.c (MAX_BYTEMODE): Removed.
 144
 145 2009-10-14  Tomas Hurka  <tom@hukatronic.cz>
 146
 147         PR 969
 148         * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
 149
 150 2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>
 151
 152         * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
 153         and vex_w_done.
 154
 155 2009-10-07  Michael Eager  <eager@eagercon.com>
 156
 157         * microblaze-dis.c: Add include for microblaze-dis.h,
 158         eliminate local extern decls.
 159         * microblaze-dis.h: New.
 160
 161 2009-10-06  Nick Clifton  <nickc@redhat.com>
 162
 163         * po/fi.po: Updated Finnish translation.
 164
 165 2009-10-03  Andreas Schwab  <schwab@linux-m68k.org>
 166
 167         * opc2c.c: Include "libiberty.h" and <errno.h>.
 168         (orig_filename): Constify.
 169         (dump_lines): Fix line number directive.
 170         (main): Set orig_filename to basename of input file.  Use
 171         xstrerror.
 172
 173         * Makefile.am (rx-dis.lo): Remove explicit dependencies.
 174         ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
 175         instead of $(EXEEXT).
 176         (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
 177         $(LINK_FOR_BUILD).  Link with libiberty.
 178         (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
 179         (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
 180         * Makefile.in: Regenerated.
 181         * rx-decode.c: Regenerated.
 182
 183 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
 184
 185         * arm-dis.c (print_insn): Check symtab_size not *symtab.
 186
 187 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
 188
 189         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
 190         * i386-tbl.h: Regenerated.
 191
 192 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
 193
 194         * ppc-dis.c (ppc_opts): Add "476" entry.
 195         * ppc-opc.c (PPC476): Define.
 196         (powerpc_opcodes): Update mnemonics where required for 476.
 197
 198 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
 199
 200         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
 201         * ppc-dis.c (ppc_opts): Likewise.
 202         Rename "ppca2" to "a2".
 203
 204 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 205
 206         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
 207
 208 2009-09-29  DJ Delorie  <dj@redhat.com>
 209
 210         * Makefile.am: Add RX files.
 211         * configure.in: Add support for RX target.
 212         * disassemble.c: Likewise.
 213         * Makefile.in: Regenerate.
 214         * configure: Regenerate.
 215         * opc2c.c: New file.
 216         * rx-decode.c: New file.
 217         * rx-decode.opc: New file.
 218         * rx-dis.c: New file.
 219
 220 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
 221
 222         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
 223         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
 224
 225 2009-09-25  Michael Eager  <eager@eagercon.com>
 226
 227         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
 228         microblaze_decode_insn): Add declarations.
 229         (get_delay_slots_microblaze): Remove.
 230
 231 2009-09-25  Martin Thuresson  <martint@google.com>
 232
 233         Update sources to make arc and arm targets compile cleanly with
 234         -Wc++-compat:
 235         * arc-dis.c Fix casts.
 236         * arc-ext.c: Add casts.
 237         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
 238         enum.
 239
 240 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
 241
 242         * i386-gen.c (opcode_modifiers): Remove Vex256.
 243         (set_bitfield): Handle XXX=V.
 244
 245         * i386-opc.h (Vex): Update comments.
 246         (Vex256): Removed.
 247         (VexNDS): Updated.
 248         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
 249
 250         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
 251         * i386-tbl.h: Regenerated.
 252
 253 2009-09-23  Nick Clifton  <nickc@redhat.com>
 254
 255         * po/fr.po: Updated French translation.
 256
 257 2009-09-21  Ben Elliston  <bje@au.ibm.com>
 258             Peter Bergner  <bergner@vnet.ibm.com>
 259
 260         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
 261         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
 262         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
 263         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
 264         ici mnemonics.
 265         (ERAT_T): New operand.
 266         (XWC_MASK): New mask.
 267         (XOPL2): New macro.
 268         (PPCA2): Define.
 269
 270 2009-09-18  Nick Clifton  <nickc@redhat.com>
 271
 272         * po/es.po: Updated Spanish translation.
 273         * po/vi.po: Updated Vietnamese translation.
 274
 275 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 276
 277         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
 278         disp == -disp.
 279
 280 2009-09-14  Nick Clifton  <nickc@redhat.com>
 281
 282         * po/nl.po: Updated Dutch translation.
 283
 284 2009-09-11  Nick Clifton  <nickc@redhat.com>
 285
 286         * po/opcodes.pot: Updated by the Translation project.
 287
 288 2009-09-11  Martin Thuresson  <martint@google.com>
 289
 290         Updated sources to compile cleanly with -Wc++-compat:
 291         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 292         * ldcref.c: Add casts.
 293         * ldctor.c: Add casts.
 294         * ldexp.c
 295         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 296         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 297         * ldlang.h (enum statement_enum): Move to top level.
 298         * ldmain.c: Add casts.
 299         * ldwrite.c: Add casts.
 300         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 301         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 302
 303 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 304
 305         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 306
 307 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 308
 309         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 310         (print_insn_s390): Signextend and shift pcrel operands before printing.
 311
 312 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 313
 314         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 315         VEX_LEN_AE_R_X_M_0 in comments.
 316
 317 2009-09-08  DJ Delorie  <dj@redhat.com>
 318
 319         * mep-opc.c: Regenerate.
 320
 321 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 322
 323         * z8kgen.c (struct op): Replace unused flavor with id.
 324         (opt): Remove extra xorb entry.
 325         (func): Use id field as fallback.
 326         (sub): Return new string, caller changed.
 327         (internal): Allocate end marker.  Assign unique id before sorting.
 328         (gas): Likewise.  Fix loop end condition.
 329         * z8k-opc.h: Regenerate.
 330
 331 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 332
 333         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 334
 335 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 336
 337         * z8kgen.c (func): Fix thinko last patch.
 338
 339 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 340
 341         * z8kgen.c (func): Stabilize qsort of identically named entries.
 342         * z8k-opc.h: Regenerate.
 343
 344 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 345
 346         * po/opcodes.pot: Regenerate.
 347
 348 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 349
 350         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 351         * configure: Regenerate.
 352         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 353         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 354         (i386-gen, ia64-gen, z8kgen): ..here.
 355         * Makefile.in: Regenerate.
 356
 357 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 358
 359         * z8k-opc.h: Regenerate.
 360
 361 2009-09-05  Martin Thuresson  <martin@mtme.org>
 362
 363         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 364         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 365         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 366         Rename argument class to symbol_class.
 367
 368 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 369
 370         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 371         to the new encoding of DBGA, DBGAH, and DBGAL.
 372         (_print_insn_bfin): Likewise.
 373
 374 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 375
 376         * bfin-dis.c (_print_insn_bfin): Don't declare.
 377         (print_insn_bfin): Don't declare.
 378         (dregs_pair): Remove.
 379         (ignore_bits): Remove.
 380         (ccstat): Remove.
 381
 382 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 383
 384         * bfin-dis.c (IS_DREG): Define.
 385         (IS_PREG): Define.
 386         (IS_AREG): Define.
 387         (IS_GENREG): Define.
 388         (IS_DAGREG): Define.
 389         (IS_SYSREG): Define.
 390         (decode_REGMV_0): Check illegal register move instructions.
 391
 392 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 393
 394         * Makefile.am (BUILD_LIBINTL): New variable.
 395         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 396         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 397         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 398         * Makefile.in: Regenerate.
 399
 400 2009-09-01  DJ Delorie  <dj@redhat.com>
 401
 402         * mep-asm.c: Regenerate.
 403         * mep-desc.c: Regenerate.
 404         * mep-opc.c: Regenerate.
 405
 406 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 407
 408         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 409         dependencies.  Remove unused FORMAT variable.
 410         * configure.com: New file to create build.com DCL script for
 411         Itanium VMS or Alpha VMS.
 412
 413 2009-08-29  Martin Thuresson  <martin@mtme.org>
 414
 415         * cris-dis.c (bytes_to_skip): Update code to use new name.
 416         * i386-dis.c (putop): Update code to use new name.
 417         * i386-gen.c (process_i386_opcodes): Update code to use
 418         new name.
 419         * i386-opc.h (struct template): Rename struct template to
 420         insn_template. Update code accordingly.
 421         * i386-tbl.h (i386_optab): Update type to use new name.
 422         * ia64-dis.c (print_insn_ia64): Rename variable template
 423         to template_val.
 424         * tic30-dis.c (struct instruction, get_tic30_instruction):
 425         Update code to use new name.
 426         * tic54x-dis.c (has_lkaddr, get_insn_size)
 427         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 428         Update code to use new name.
 429         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 430         Update type to new name.
 431         * z8kgen.c (internal, gas): Rename variable new to new_op.
 432
 433 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 434
 435         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 436         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 437         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 438         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 439         * Makefile.in: Regenerated.
 440
 441 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 442
 443         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 444         [INSTALL_LIBBFD]: ... here, ...
 445         [INSTALL_LIBBFD]: ... and empty overrides here.
 446         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 447         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 448         * Makefile.in: Regenerate.
 449         * configure: Regenerate.
 450
 451 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 452
 453         * m68k-dis.c (print_insn_arg): Add movecr register names for
 454         coldfire v4e families.
 455
 456 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 457
 458         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 459         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 460         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 461         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 462         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 463         (i386-gen.o): New rule.
 464         ($(srcdir)/i386-init.h): Adjust.
 465         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 466         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 467         (ia64-gen.o): New rule.
 468         (ia64_asmtab_deps): New variable.
 469         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 470         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 471         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 472         likewise.
 473         (s390-opc.tab): Adjust.
 474         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 475         rules.
 476         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 477         * Makefile.in: Regenerate.
 478         * z8kgen.c (gas): Avoid '/*' in comment.
 479         * z8k-opc.h (func): Regenerate.
 480
 481 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 482
 483         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 484         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 485         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 486         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 487         msp430-dis.c added.
 488         (LIBOPCODES_CFILES): New variable, adding to
 489         TARGET_LIBOPCODES_CFILES also non-target library sources.
 490         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 491         files.
 492         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 493         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 494         * Makefile.in: Regenerate.
 495         * po/POTFILES.in: Regenerate.
 496
 497 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 498
 499         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 500         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 501         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 502         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 503         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 504         is built shared even if it is not to be installed.
 505         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 506         (install_libopcodes, uninstall_libopcodes): Remove.
 507         (AM_CPPFLAGS): Renamed from ...
 508         (INCLUDES): ... this.
 509         * Makefile.in: Regenerate.
 510
 511         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 512         1.11, foreign, no-dist.
 513         (MKDEP, m32c_opc_h): Remove variables.
 514         (disassemble.lo): Rewrite using automake-style dependency
 515         tracking rules; only list the dependency upon the primary source
 516         file, but no included headers.
 517         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 518         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 519         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 520         ensure all dependency fragments are included in the Makefile.
 521         (s390-opc.lo): Depend on s390-opc.tab.
 522         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 523         (mkdep section): Remove.
 524         * Makefile.in: Regenerate.
 525         * po/POTFILES.in: Regenerate.
 526
 527         * Makefile.am (install-pdf, install-html): Remove.
 528         * Makefile.in: Regenerate.
 529
 530         * Makefile.in: Regenerate.
 531         * aclocal.m4: Likewise.
 532         * config.in: Likewise.
 533         * configure: Likewise.
 534
 535 2009-08-06  Michael Eager <eager@eagercon.com>
 536
 537         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 538         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 539         * Makefile.in: Regenerate.
 540         * configure.in: Add bfd_microblaze_arch target.
 541         * configure: Regenerate.
 542         * disassemble.c: Define ARCH_microblaze, return
 543         print_insn_microblaze().
 544         * microblaze-dis.c: New MicroBlaze disassembler.
 545         * microblaze-opc.h: New MicroBlaze opcode definitions.
 546         * microblaze-opcm.h: New MicroBlaze opcode types.
 547
 548 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 549
 550         * configure.in: Handle bfd_l1om_arch.
 551         * disassemble.c (disassembler): Likewise.
 552
 553         * configure: Regenerated.
 554
 555         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 556         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 557
 558         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 559         Add CPU_L1OM_FLAGS.
 560         (cpu_flags): Add CpuL1OM.
 561         (set_bitfield): Take an argument to set the value field.
 562         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 563         (process_i386_opcode_modifier): Updated.
 564         (process_i386_operand_type): Likewise.
 565         * i386-init.h: Regenerated.
 566         * i386-tbl.h: Likewise.
 567
 568         * i386-opc.h (CpuL1OM): New.
 569         (CpuXsave): Updated.
 570         (i386_cpu_flags): Add cpul1om.
 571
 572 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 573
 574         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 575         frstpm.
 576         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 577         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 578         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 579         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 580         Define.
 581         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 582         and cpufisttp.
 583         * i386-opc.tbl: Qualify floating point instructions by their
 584         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 585         and fsincos to be avilable only on 387. Fix fstsw ax to be
 586         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 587         and frstpm.
 588         * i386-init.h, i386-tbl.h: Regenerate.
 589
 590 2009-07-20  Nick Clifton  <nickc@redhat.com>
 591
 592         PR 10288
 593         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 594         offset or indexed based addressing mode 3.
 595
 596 2009-07-14  Nick Clifton  <nickc@redhat.com>
 597
 598         PR 10288
 599         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 600         patterns.
 601         (arm_decode_shift): Catch illegal register based shifts.
 602         (print_insn_arm): Properly handle negative register r0
 603         post-indexed addressing.
 604
 605 2009-07-10  Doug Kwan  <dougkwan@google.com>
 606
 607         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 608         lower 32 bits of long types to make hexadecimal output consistent
 609         on both 32-bit and 64-bit hosts.
 610
 611 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 612
 613         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 614         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 615         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 616         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 617         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 618         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 619         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 620         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 621         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 622         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 623         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 624         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 625
 626 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 627
 628         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
 629
 630 2009-07-07  Nick Clifton  <nickc@redhat.com>
 631
 632         PR 10288
 633         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
 634         addressing modes.
 635
 636 2009-07-06  DJ Delorie  <dj@redhat.com>
 637
 638         * mep-desc.c: Regenerate.
 639         * mep-desc.h: Regenerate.
 640         * mep-opc.c: Regenerate.
 641         * mep-opc.h: Regenerate.
 642
 643 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 644
 645         * i386-opc.h (CpuFMA4): Add CpuFMA4.
 646         (i386_cpu_flags): New.
 647         * i386-gen.c: Add CPU_FMA4_FLAGS.
 648         * i386-opc.tbl: Add FMA4 instructions.
 649         * i386-tbl.h: Regenerate.
 650         * i386-init.h: Regenerate.
 651         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
 652         (OP_XMM_VexW): Ditto.
 653         (OP_EX_VexW): Ditto.
 654         (VEXI4_Fixup): Ditto.
 655         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
 656         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
 657         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
 658         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
 659         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
 660         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
 661         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
 662         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
 663         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
 664         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
 665         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
 666         (get_vex_imm8): New. handle FMA4.
 667         (OP_EX_VexReg): Ditto.
 668
 669 2009-06-30  Nick Clifton  <nickc@redhat.com>
 670
 671         PR 10288
 672         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
 673         LFM and SFM instructions as comments,.
 674         Improve consistency of formatting for instructions displayed as
 675         comments and decimal values displayed with their hexadecimal
 676         equivalents.
 677         Formatting tidy ups.
 678
 679 2009-06-29  Nick Clifton  <nickc@redhat.com>
 680
 681         PR 10288
 682         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
 683         boundary between variaant and generic coprocessor instuctions.
 684         (coprocessor): Use it.
 685         Fix architecture version of MCRR and MRRC instructions.
 686         (arm_opcdes): Fix patterns for STRB and STRH instructions.
 687         (print_insn_coprocessor): Check architecture and extension masks.
 688         Print a hexadecimal version of any decimal constant that is
 689         outside of the range of -16 to +32.
 690         (print_arm_address): Add a return value of the offset used in the
 691         adress, if it is worth printing a hexadecimal version of it.
 692         (print_insn_neon): Print a hexadecimal version of any decimal
 693         constant that is outside of the range of -16 to +32.
 694         (print_insn_arm): Likewise.
 695         (print_insn_thumb16): Likewise.
 696         (print_insn_thumb32): Likewise.
 697
 698         PR 10297
 699         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
 700         of an undefined instruction.
 701         (arm_opcodes): Use it.
 702         (thumb_opcod): Use it.
 703         (thumb32_opc): Use it.
 704
 705 2009-06-23  DJ Delorie  <dj@redhat.com>
 706
 707         * mep-desc.c: Regenerate.
 708         * mep-desc.h: Regenerate.
 709         * mep-dis.c: Regenerate.
 710         * mep-ibld.c: Regenerate.
 711         * mep-opc.c: Regenerate.
 712
 713         * mep-asm.c: Regenerate.
 714         * mep-opc.c: Regenerate.
 715         * mep-opc.h: Regenerate.
 716
 717 2009-06-22  Nick Clifton  <nickc@redhat.com>
 718
 719         * po/fi.po: Updated Finish translation.
 720
 721 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 722
 723         * m32c-asm.c: Regenerate.
 724
 725 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 726
 727         * score-dis.c (print_insn_score48, print_insn_score32): Move default
 728         case label to proper lexical block.
 729         * score7-dis.c (print_insn_score32): Likewise.
 730
 731 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
 732
 733         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
 734         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
 735         * s390-opc.txt (nopr, nop): Use new instruction format.
 736
 737 2009-06-18  Nick Clifton  <nickc@redhat.com>
 738
 739         PR 10288
 740         * arm-dis.c (print_insn_coprocessor): Check that a user specified
 741         ARM architecture supports the matched instruction.
 742         (print_insn_arm): Likewise.
 743         (select_arm_features): New function.  Fills in the fields of an
 744         arm_feature_set structure based on a given arm machine number.
 745         (print_insn): Initialise an arm_feature_set structure.
 746
 747 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
 748
 749         * vax-dis.c (is_function_entry): Return success for synthetic
 750         symbols too.
 751         (is_plt_tail): New function.
 752         (print_insn_vax): Decode PLT entry offset longword.
 753
 754 2009-06-15  Nick Clifton  <nickc@redhat.com>
 755
 756         PR 10186
 757         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
 758         instruction.
 759
 760         PR 10173
 761         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
 762
 763 2009-06-15  Nick Clifton  <nickc@redhat.com>
 764
 765         PR 10263
 766         * arm-dis.c (print_insn): Ignore is_data if the user has requested
 767         the disassembly of data as well as instructions.
 768
 769 2009-06-11  Doug Evans  <dje@sebabeach.org>
 770
 771         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
 772
 773 2009-06-11  Anthony Green  <green@moxielogic.com>
 774
 775         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
 776         (moxie_form3_opc_info): Add branch instructions.
 777         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
 778         encoded instructions.
 779
 780 2009-06-06  Anthony Green  <green@moxielogic.com>
 781
 782         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
 783         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
 784
 785 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
 786
 787         * dep-in.sed: Don't use \n in replacement part of s command.
 788         * Makefile.am (DEP1): LC_ALL for uniq.
 789         * Makefile.in: Regenerate.
 790
 791 2009-06-02  Nick Clifton  <nickc@redhat.com>
 792
 793         * po/nl.po: Updated Dutch translation.
 794
 795 2009-06-02  Tristan Gingold  <gingold@adacore.com>
 796
 797         * ia64-gen.c (parse_resource_users, print_dependency_table,
 798         add_dis_table_ent, finish_distable, insert_bit_table_ent,
 799         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
 800         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
 801         insert_completer_entry, print_completer_entry, print_completer_table,
 802         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
 803
 804 2009-05-28  DJ Delorie  <dj@redhat.com>
 805
 806         * mep-asm.c: Regenerate.
 807         * mep-desc.c: Regenerate.
 808
 809 2009-05-26  DJ Delorie  <dj@redhat.com>
 810
 811         * mep-asm.c: Regenerate.
 812         * mep-desc.c: Regenerate.
 813         * mep-desc.h: Regenerate.
 814         * mep-dis.c: Regenerate.
 815         * mep-ibld.c: Regenerate.
 816         * mep-opc.c: Regenerate.
 817         * mep-opc.h: Regenerate.
 818
 819 2009-05-26  Nick Clifton  <nickc@redhat.com>
 820
 821         * po/id.po: Updated Indonesian translation.
 822         * po/opcodes.pot: Updated template file.
 823
 824 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
 825
 826         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
 827         per line with all lines having continuation backslash.  Prefix
 828         first line with "A", following lines with "B".
 829         * Makefile.am (DEP): Don't use dep.sed here.
 830         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
 831         dep.sed here on dependencies, sort and uniq.
 832         * Makefile.in: Regenerate.
 833
 834 2009-05-25  Tristan Gingold  <gingold@adacore.com>
 835
 836         * makefile.vms (OPT): New variable.
 837         (CFLAGS): Update compilation flags.
 838
 839 2009-05-22  DJ Delorie  <dj@redhat.com>
 840
 841         * mep-asm.c: Regenerate.
 842         * mep-desc.c: Regenerate.
 843         * mep-desc.h: Regenerate.
 844         * mep-dis.c: Regenerate.
 845         * mep-ibld.c: Regenerate.
 846         * mep-opc.c: Regenerate.
 847         * mep-opc.h: Regenerate.
 848
 849 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 850
 851         * i386-opc.h (Cpusse5): Delete.
 852         (i386_cpu_flags): Delete.
 853         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
 854         * i386-opc.tbl: Remove SSE5 instructions.
 855         * i386-tbl.h: Regenerate.
 856         * i386-init.h: Regenerate.
 857         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
 858         (print_drex_arg): Delete.
 859         (OP_DREX4): Delete.
 860         (OP_DREX3): Delete.
 861         (OP_DREX_ICMP): Delete.
 862         (OP_DREX_FCMP): Delete.
 863         (DREX_*): Delete.
 864         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
 865
 866 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
 867
 868         * Makefile.am: Run "make dep-am".
 869         * Makefile.in: Regenerate.
 870         * po/POTFILES.in: Regenerate.
 871
 872 2009-05-19  DJ Delorie  <dj@redhat.com>
 873
 874         * mep-asm.c: Regenerate.
 875         * mep-opc.c: Regenerate.
 876
 877 2009-04-30  DJ Delorie  <dj@redhat.com>
 878
 879         * mep-asm.c: Regenerate.
 880         * mep-desc.c: Regenerate.
 881         * mep-desc.h: Regenerate.
 882         * mep-dis.c: Regenerate.
 883         * mep-ibld.c: Regenerate.
 884         * mep-opc.c: Regenerate.
 885         * mep-opc.h: Regenerate.
 886
 887 2009-04-17  DJ Delorie  <dj@redhat.com
 888
 889         * mep-desc.c: Regenerate.
 890         * mep-ibld.c: Regenerate.
 891         * mep-opc.c: Regenerate.
 892         * mep-opc.h: Regenerate.
 893
 894 2009-04-15  Anthony Green  <green@moxielogic.com>
 895
 896         * moxie-opc.c, moxie-dis.c: Created.
 897         * Makefile.am: Build the moxie source files.
 898         * configure.in: Add moxie support.
 899         * Makefile.in, configure: Rebuilt.
 900         * disassemble.c (disassembler): Add moxie support.
 901         (ARCH_moxie): Define.
 902
 903 2009-04-15  Jan Beulich  <jbeulich@novell.com>
 904
 905         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
 906         extension to None.
 907         (pshab, pshaw, pshad, pshaq): Likewise.
 908         * i386-tbl.h: Re-generate.
 909
 910 2009-04-08  DJ Delorie  <dj@redhat.com
 911
 912         * mep-asm.c: Regenerate.
 913         * mep-desc.c: Regenerate.
 914         * mep-desc.h: Regenerate.
 915         * mep-dis.c: Regenerate.
 916         * mep-ibld.c: Regenerate.
 917         * mep-opc.c: Regenerate.
 918         * mep-opc.h: Regenerate.
 919
 920 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
 921
 922         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
 923         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
 924         Reorder entries so the extended mnemonics are listed before tlbilx.
 925
 926 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
 927
 928         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
 929         due to -many/-Many.
 930         (print_insn_powerpc): Make sure we only deprecate instructions using
 931         the original dialect and not a modified dialect due to -Many handling.
 932         Move the handling of the condition register and default operands to
 933         the end of the if/else if/else chain.
 934         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 935         instructions from newer processors are listed before older ones.
 936         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
 937         that have instructions with conflicting opcodes.
 938
 939 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
 940
 941         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
 942         E500MC entries.
 943
 944 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
 945
 946         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
 947
 948 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
 949
 950         * arm-dis.c (print_insn): Also check section matches in backwards
 951         search for mapping symbol.
 952
 953 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
 954
 955         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
 956
 957 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
 958
 959         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
 960         * Makefile.am: Run "make dep-am".
 961         * Makefile.in: Regenerate.
 962         * openrisc-opc.c: Regenerate.
 963
 964 2009-03-10  Nick Clifton  <nickc@redhat.com>
 965
 966         * po/id.po: Updated Indonesian translation.
 967
 968 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
 969
 970         * ppc-dis.c: Include "opintl.h".
 971         (struct ppc_mopt, ppc_opts): New.
 972         (ppc_parse_cpu): New function.
 973         (powerpc_init_dialect): Use it.
 974         (print_ppc_disassembler_options): Dump options from ppc_opts.
 975         Internationalize message.
 976
 977 2009-03-06  Nick Clifton  <nickc@redhat.com>
 978
 979         * po/es.po: Updated Spanish translation.
 980
 981 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
 982
 983         PR 6768
 984         * configure.in: Test for ld --as-needed support.  Link shared
 985         libopcodes against libm.
 986         * configure: Regenerate.
 987
 988 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
 989
 990         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 991         instructions from newer processors are listed before older ones.
 992
 993 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
 994
 995         * Makefile.am: Run "make dep-am".
 996         (HFILES): Move lm32-desc.h and lm32-opc.h from..
 997         (CFILES): ..here.
 998         * Makefile.in: Regenerate.
 999
1000 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
1001
1002         * score7-dis.c: New file.
1003         * Makefile.am: Add dependencies for score7-dis.c.
1004         * Makefile.in: Regenerate.
1005         * configure.in: Add score7-dis to score files.
1006         * configure: Regenerate.
1007         * score-dis.c: Add support for score7 architecture.
1008         * score-opc.h: Likewise.
1009
1010 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
1011
1012         * configure: Regenerate.
1013
1014 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
1015
1016         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1017
1018 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
1019
1020         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1021         the power7 and the isel instructions.
1022         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1023         (insert_dm, extract_dm): Likewise.
1024         (XB6): Update comment to include XX2 form.
1025         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1026         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1027         (RemoveXX3DM): Delete.
1028         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1029         "mftgpr">: Deprecate for POWER7.
1030         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1031         "frsqrte.">: Deprecate the three operand form and enable the two
1032         operand form for POWER7 and later.
1033         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
1034         <"waitsrv", "waitimpl">: Add extended opcodes.
1035         <"ldbrx", "stdbrx">: Enable for POWER7.
1036         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1037         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1038         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1039         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1040         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1041         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1042         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1043         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1044         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1045         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1046         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1047         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1048         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1049         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1050         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1051         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1052         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1053         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1054         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1055         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1056         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1057         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1058         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1059         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1060         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1061         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1062         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1063         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1064         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1065         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1066         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1067         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1068         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1069         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1070         "xxspltw", "xxswapd">: Add VSX opcodes.
1071
1072 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
1073
1074         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1075         (operand_types): Remove Vex_Imm4.
1076
1077         * i386-opc.h (Vex_Imm4): Removed.
1078         (OTMax): Updated.
1079         (i386_operand_type): Remove vex_imm4.
1080
1081         * i386-opc.tbl: Remove Vex_Imm4 comments.
1082         * i386-init.h: Regenerated.
1083         * i386-tbl.h: Likewise.
1084
1085 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
1086
1087         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1088         vq{r}shr{u}n.s64 insnstructions.
1089
1090 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
1091
1092         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1093         operand to be a float point register (FRT/FRS).
1094
1095 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
1096
1097         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1098         dmfc2 and dmtc2 before the architecture-level variants.
1099
1100 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
1101
1102         * fr30-opc.c: Regenerate.
1103         * frv-opc.c: Regenerate.
1104         * ip2k-opc.c: Regenerate.
1105         * iq2000-opc.c: Regenerate.
1106         * lm32-opc.c: Regenerate.
1107         * m32c-opc.c: Regenerate.
1108         * m32r-opc.c: Regenerate.
1109         * mep-opc.c: Regenerate.
1110         * mt-opc.c: Regenerate.
1111         * xc16x-opc.c: Regenerate.
1112         * xstormy16-opc.c: Regenerate.
1113         * tic54x-dis.c (print_instruction): Avoid compiler warning on
1114         sprintf call.
1115
1116 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
1117
1118         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1119
1120 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
1121
1122         * ppc-opc.c: Update copyright year.
1123         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1124         ordering for POWER4 and later and use the correct Server ordering.
1125
1126 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
1127
1128         AVX Programming Reference (January, 2009)
1129         * i386-dis.c (PREFIX_VEX_3A44): New.
1130         (VEX_LEN_3A44_P_2): Likewise.
1131         (PREFIX_VEX_3A48): Updated.
1132         (VEX_LEN_3A4C_P_2): Likewise.
1133         (prefix_table): Add PREFIX_VEX_3A44.
1134         (vex_table): Likewise.
1135         (vex_len_table): Add VEX_LEN_3A44_P_2.
1136
1137         * i386-opc.tbl: Add PCLMUL + AVX instructions.
1138         * i386-tbl.h: Regenerated.
1139
1140 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
1141
1142         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1143         (mips_arch_choices): Add XLR entry.
1144         * mips-opc.c (XLR): Define.
1145         (mips_builtin_opcodes): Add XLR instructions.
1146
1147 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
1148
1149         * Makefile.am: Add install-pdf target.
1150         * po/Make-in: Add install-pdf target.
1151         * Makefile.in: Regenerate.
1152
1153 2009-02-02  DJ Delorie  <dj@redhat.com>
1154
1155         * mep-asm.c: Regenerate.
1156         * mep-desc.c: Regenerate.
1157         * mep-desc.h: Regenerate.
1158         * mep-dis.c: Regenerate.
1159         * mep-ibld.c: Regenerate.
1160         * mep-opc.c: Regenerate.
1161         * mep-opc.h: Regenerate.
1162
1163 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
1164
1165         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1166         qsub, and qdsub.
1167
1168 2009-01-28  Chao-ying Fu  <fu@mips.com>
1169
1170         * mips-opc.c (suxc1): Add the flag of FP_D.
1171
1172 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
1173
1174         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1175         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1176         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1177         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1178         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1179         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1180         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1181         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1182
1183 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1184
1185         * configure.in (commonbfdlib): Delete.
1186         (SHARED_LIBADD): Add pic libiberty if such is available.
1187         * configure: Regenerate.
1188         * po/POTFILES.in: Regenerate.
1189
1190 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1191
1192         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1193         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1194         operand form and enable the four operand form for POWER6 and later.
1195         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1196         three operand form for POWER6 and later.
1197
1198 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1199
1200         * bfin-dis.c (OUTS): Use "%s" as format string.
1201
1202 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1203
1204         * i386-gen.c (cpu_flag_init): Remove a white space.
1205         (operand_type_init): Likewise.
1206
1207 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1208
1209         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1210         * i386-tbl.h: Regenerated.
1211
1212 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1213
1214         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1215         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1216         subS, xorS and cmpS.
1217
1218 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1219
1220         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1221         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1222         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1223         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1224         and CpuSYSCALL.
1225         (lineno): Removed.
1226         (set_bitfield): Take an argument, lineno.  Don't report lineno
1227         on error if it is -1.
1228         (process_i386_cpu_flag): Take an argument, lineno.
1229         (process_i386_opcode_modifier): Likewise.
1230         (process_i386_operand_type): Likewise.
1231         (output_i386_opcode): Likewise.
1232         (opcode_hash_entry): Add lineno.
1233         (process_i386_opcodes): Updated.
1234         (process_i386_registers): Likewise.
1235         (process_i386_initializers): Likewise.
1236
1237         * i386-opc.h (CpuP4): Removed.
1238         (CpuK6): Likewise.
1239         (CpuK8): Likewise.
1240         (CpuClflush): New.
1241         (CpuSYSCALL): Likewise.
1242         (CpuMMX): Updated.
1243         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1244         cpuclflush and cpusyscall.
1245
1246         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1247         syscall and sysret.
1248         * i386-init.h: Regenerated.
1249         * i386-tbl.h: Likewise.
1250
1251 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1252
1253         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1254         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1255         (cpu_flags): Add CpuRdtscp.
1256         (set_bitfield): Remove CpuSledgehammer check.
1257
1258         * i386-opc.h (CpuRdtscp): New.
1259         (CpuLM): Updated.
1260         (i386_cpu_flags): Add cpurdtscp.
1261
1262         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1263         * i386-init.h: Regenerated.
1264         * i386-tbl.h: Likewise.
1265
1266 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1267
1268         * ppc-opc.c (PPCNONE): Define.
1269         (NOPOWER4): Delete.
1270         (powerpc_opcodes): Initialize the new "deprecated" field.
1271
1272 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1273
1274         AVX Programming Reference (December, 2008)
1275         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1276         (VEX_LEN_E7_P_2_M_0): Likewise.
1277         (VEX_LEN_2C_P_1): Updated.
1278         (VEX_LEN_E8_P_2): Likewise.
1279         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1280         (mod_table): Likewise.
1281
1282         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1283         * i386-tbl.h: Regenerated.
1284
1285 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1286
1287         * i386-gen.c (process_copyright): Update for 2009.
1288
1289         * i386-init.h: Regenerated.
1290         * i386-tbl.h: Likewise.
1291
1292 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1293
1294         AVX Programming Reference (December, 2008)
1295         * i386-dis.c (OP_VEX_FMA): Removed.
1296         (OP_EX_VexW): Likewise.
1297         (OP_EX_VexImmW): Likewise.
1298         (OP_XMM_VexW): Likewise.
1299         (VEXI4_Fixup): Likewise.
1300         (VPERMIL2_Fixup): Likewise.
1301         (VexI4): Likewise.
1302         (VexFMA): Likewise.
1303         (Vex128FMA): Likewise.
1304         (EXVexW): Likewise.
1305         (EXdVexW): Likewise.
1306         (EXqVexW): Likewise.
1307         (EXVexImmW): Likewise.
1308         (XMVexW): Likewise.
1309         (VPERMIL2): Likewise.
1310         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1311         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1312         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1313         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1314         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1315         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1316         (get_vex_imm8): Likewise.
1317         (OP_EX_VexReg): Likewise.
1318         vpermil2_op): Likewise.
1319         (EXVexWdq): New.
1320         (vex_w_dq_mode): Likewise.
1321         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1322         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1323         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1324         (es_reg): Updated.
1325         (PREFIX_VEX_38DB): Likewise.
1326         (PREFIX_VEX_3A4A): Likewise.
1327         (PREFIX_VEX_3A60): Likewise.
1328         (PREFIX_VEX_3ADF): Likewise.
1329         (VEX_LEN_3ADF_P_2): Likewise.
1330         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1331         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1332         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1333         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1334         PREFIX_VEX_3896...PREFIX_VEX_389F,
1335         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1336         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1337         (vex_table): Likewise.
1338         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1339         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1340         (putop): Support "%XW".
1341         (intel_operand_size): Handle vex_w_dq_mode.
1342
1343         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1344
1345         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1346         instructions.  Add new FMA instructions.
1347         * i386-tbl.h: Regenerated.
1348
1349 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1350
1351         * or32-opc.c (or32_print_register, or32_print_immediate,
1352         disassemble_insn): Don't rely on undefined sprintf behaviour.
1353
1354 For older changes see ChangeLog-2008
1355 \f
1356 Local Variables:
1357 mode: change-log
1358 left-margin: 8
1359 fill-column: 74
1360 version-control: never
1361 End: