opcodes/ChangeLog

   1 2001-11-02  Nick Clifton  <nickc@cambridge.redhat.com>
   2
   3         * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
   4         * configure: Regernate.
   5         * po/fr.po: New file.
   6         * po/sv.po: New file.
   7         * po/tr.po: New file.
   8
   9 2001-11-01  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
  10
  11         * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
  12         constant as source.
  13
  14 2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
  15
  16         * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
  17         dependencies.
  18         * Makefile.in: Regenerate.
  19         * mmix-dis.c, mmix-opc.c: New files.
  20
  21 2001-10-29  Kazu Hirata  <kazu@hxi.com>
  22
  23         * d30v-dis.c: Fix a comment typo.
  24
  25 2001-10-23  Chris Demetriou  <cgd@broadcom.com>
  26
  27         * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
  28         "bltzall" as writing GPR 31 (since they do).
  29
  30         * mips-dis.c (print_insn_arg): Calculate info->target
  31         where appropriate.
  32         (print_insn_mips): Fill in instruction info.
  33         (print_mips16_insn_arg): Remove unneded variable 'val'.
  34         Removed duplicated instruction target calculations,
  35         calculate once and print that result.  Use same idiom for
  36         masking the jump segment bits as is used in print_insn_arg.
  37
  38 2001-10-20  Alan Modra  <amodra@bigpond.net.au>
  39
  40         * ppc-opc.c (CT): Make it an optional operand.
  41
  42 2001-10-17  Chris Demetriou  <cgd@broadcom.com>
  43
  44         * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
  45         SB-1 binaries include instructions specific to the SB-1.
  46         * mips-opc.c (SB1): New definition.
  47         (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
  48         "recip.ps", "rsqrt.ps", and "sqrt.ps".
  49
  50 2001-10-17  matthew green  <mrg@redhat.com>
  51
  52         * ppc-opc.c (STRM): New AltiVec operand.
  53         (XDSS): New AltiVec instruction form.
  54         (mtvscr): Correct operand list.
  55         (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
  56
  57 2001-10-17  Alan Modra  <amodra@bigpond.net.au>
  58
  59         * po/POTFILES.in: Regenerate.
  60
  61 2001-10-13  matthew green  <mrg@redhat.com>
  62
  63         * ppc-opc.c (MO): New macro for MO field of mbar instruction.
  64         (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
  65         mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
  66
  67 2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
  68
  69         * cgen-ibld.in: Include safe-ctype.h in preference to
  70         ctype.h.
  71         * cgen-asm.in: Include safe-ctype.h in preference to
  72         ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
  73         TOLOWER instead of tolower.
  74         (@arch@_cgen_build_insn_regex): Remove duplication of syntax
  75         string elements in constructed regular expression.
  76         * fr30-asm.c: Regenerate.
  77         * fr30-desc.c: Regenerate.
  78         * fr30-ibld.c: Regenerate.
  79         * m32r-asm.c: Regenerate.
  80         * m32r-desc.c: Regenerate.
  81         * m32r-ibld.c: Regenerate.
  82         * openrisc-asm.c: Regenerate.
  83         * openrisc-desc.c: Regenerate.
  84         * openrisc-ibld.c: Regenerate.
  85         * po/opcodes.pot: Regenerate.
  86
  87 2001-10-12  matthew green  <mrg@redhat.com>
  88
  89         * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
  90         instruction field instruction/extraction functions for new BookE
  91         DE form instructions.
  92         (CT): New macro for CT field in an X form instruction.
  93         (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
  94         instructions.
  95         (PPC64): Don't include PPC_OPCODE_PPC.
  96         (403): New opcode macro for PPC403 processors.
  97         (BOOKE): New opcode macro for BookE processors.
  98         (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
  99         (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
 100         (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
 101         (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
 102         (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
 103         (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
 104         (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
 105         (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
 106         (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
 107         (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
 108         (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
 109         (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
 110         (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
 111         (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
 112
 113         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
 114         for a disassembler option of `booke', `booke32' or `booke64' to enable
 115         BookE support in the disassembler.
 116
 117 2001-10-12  John Healy  <jhealy@redhat.com>
 118
 119         * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
 120         for the length when extracting the base part of the insn.
 121
 122 2001-10-09  Bruno Haible  <haible@clisp.cons.org>
 123
 124         * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
 125         regular expression.  Fix some formatting problems.
 126         * fr30-asm.c: Regenerate.
 127         * openrisc-asm.c: Regenerate.
 128         * m32r-asm.c: Regenerate.
 129
 130 2001-10-09  Christian Groessler <cpg@aladdin.de>
 131
 132         * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
 133         of indirect register memory accesses to be same format the
 134         assembler accepts.
 135
 136 2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
 137
 138         * sh-opc.h: Fix encoding of least significant nibble of the
 139         DSP single data transfer instructions.
 140
 141         * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
 142         instructions.
 143
 144 2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
 145
 146         * cgen-asm.in: Fix compile time warning messages in generated
 147         C files.
 148         * cgen-dis.in: The same.
 149         * cgen-ibld.in: The same.
 150         * fr30-asm.c: Regenerate.
 151         * fr30-desc.c: Regenerate.
 152         * fr30-dis.c: Regenerate.
 153         * fr30-ibld.c: Regenerate.
 154         * fr30-opc.c: Regenerate.
 155         * m32r-asm.c: Regenerate.
 156         * m32r-desc.c: Regenerate.
 157         * m32r-dis.c: Regenerate.
 158         * m32r-ibld.c: Regenerate.
 159         * m32r-opc.c: Regenerate.
 160         * m32r-opinst.c Regenerate.
 161         * openrisc-asm.c: Regenerate.
 162         * openrisc-desc.c: Regenerate.
 163         * openrisc-dis.c: Regenerate.
 164         * openrisc-ibld.c: Regenerate.
 165         * openrisc-opc.c: Regenerate.
 166         * openrisc-opc.h: Regenerate.
 167         * Makefile.in: Regenerate.
 168         * po/POTFILES.in: Regenerate.
 169         * po/opcodes.pot: Regenerate.
 170
 171 2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
 172
 173         * arm-opc.h (arm_opcodes): Add cirrus insns.
 174
 175         * arm-dis.c (print_insn_arm): Add 'I' case.
 176
 177 2001-10-03  Alan Modra  <amodra@bigpond.net.au>
 178
 179         * po/POTFILES.in: Regenerate.
 180         * configure: Regenerate.
 181
 182 2001-10-02  Alan Modra  <amodra@bigpond.net.au>
 183
 184         * Makefile.am (Makefile): Depend on bfd/configure.in.
 185         Run "make dep-am".
 186         * Makefile.in: Regenerate.
 187
 188 2001-09-30  John Healy  <jhealy@redhat.com>
 189
 190         * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
 191         calls to cgen_get_insn_value and cgen_put_insn_value calls.
 192         (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
 193
 194 2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
 195
 196         * Makefile.am: Update dependencies with "make dep-am".
 197         * Makefile.in: Regenerate.
 198
 199 2001-09-26  Alan Modra  <amodra@bigpond.net.au>
 200
 201         * arc-dis.c: Formatting fixes.
 202         (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
 203
 204 2001-09-21  Bruno Haible  <haible@clisp.cons.org>
 205
 206         * arc-dis.c: Don't include <ctype.h>.
 207         * openrisc-desc.c: Likewise.
 208         * openrisc-ibld.c: Likewise.
 209
 210 2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
 211
 212         * fr30-opc.c: Fix compile time warning messages.
 213         * i370-opc.c: Fix compile time warning messages.
 214         * i960-dis.c: Fix compile time warning messages.
 215         * m32r-asm.c: Fix compile time warning messages.
 216         * m32r-desc.c: Fix compile time warning messages.
 217         * m32r-dis.c: Fix compile time warning messages.
 218         * m32r-ibld.c: Fix compile time warning messages.
 219         * m32r-opc.c: Fix compile time warning messages.
 220         * m32r-opinst.c: Fix compile time warning messages.
 221         * ns32k-dis.c: Fix compile time warning messages.
 222         * openrisc-asm.c: Fix compile time warning messages.
 223         * openrisc-desc.c: Fix compile time warning messages.
 224         * openrisc-dis.c: Fix compile time warning messages.
 225         * openrisc-ibld.c: Fix compile time warning messages.
 226         * openrisc-opc.c: Fix compile time warning messages.
 227         * pdp11-dis.c: Fix compile time warning messages.
 228         * tic54x-dis.c: Fix compile time warning messages.
 229         * v850-opc.c: Fix compile time warning messages.
 230         * vax-dis.c: Fix compile time warning messages.
 231         * w65-opc.h: Fix compile time warning messages.
 232         * z8k-opc.h: Fix compile time warning messages.
 233         * z8kgen.c: Fix compile time warning messages.
 234
 235 2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
 236
 237         * arm-dis.c:   Fix compile time warning messages.
 238         * cgen-asm.c:  Fix compile time warning messages.
 239         * cgen-dis.c:  Fix compile time warning messages.
 240         * cris-dis.c:  Fix compile time warning messages.
 241         * d10v-dis.c:  Fix compile time warning messages.
 242         * fr30-asm.c:  Fix compile time warning messages.
 243         * fr30-desc.c: Fix compile time warning messages.
 244         * fr30-dis.c:  Fix compile time warning messages.
 245         * fr30-ibld.c: Fix compile time warning messages.
 246
 247 2001-09-18  Bruno Haible  <haible@clisp.cons.org>
 248
 249         * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 250         (cgen_parse_keyword): Use ISALNUM instead of isalnum.
 251         * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
 252         (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
 253         isalpha/tolower.
 254         (cgen_keyword_add): Use ISALNUM instead of isalnum.
 255         (hash_keyword_name): Use TOLOWER instead of tolower.
 256         * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 257         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 258         tolower/isspace.
 259         (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
 260         * fr30-desc.c: Don't include <ctype.h>.
 261         * fr30-ibld.c: Likewise.
 262         * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
 263         (load_insn_classes, parse_resource_users, load_depfile): Use
 264         ISSPACE instead of isspace.
 265         * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 266         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 267         tolower/isspace.
 268         (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
 269         * m32r-desc.c: Don't include <ctype.h>.
 270         * m32r-ibld.c: Likewise.
 271         * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 272         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 273         tolower/isspace.
 274         (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
 275
 276 2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
 277
 278         * Makefile.am: Add rules and dependencies to create the s/390 opcode
 279         table out of s390-opc.txt automatically.
 280         * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
 281         * s390-mkopc.c (dumpTable): Change output to create a complete file.
 282         * s390-opc.c: New improved opcode format macros and remove the
 283         pregenerated opcode table.
 284         * s390-opc.txt: Adapt to new improved opcode format macros.
 285
 286 2001-09-14  David Schleef <ds@schleef.org>
 287
 288         * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
 289
 290 2001-09-04  Alan Modra  <amodra@bigpond.net.au>
 291
 292         * i386-dis.c (grps): Don't print the implicit al/ax/eax register
 293         for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
 294
 295 2001-08-31  Eric Christopher  <echristo@redhat.com>
 296             Jason Eckhardt    <jle@redhat.com>
 297
 298         * mips-dis.c: Add support for bfd_mach_mipsisa32 and
 299         bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
 300         bfd_mach_mips64.
 301
 302 2001-08-31  Andreas Jaeger  <aj@suse.de>
 303
 304         * tic54x-opc.c: Add default initializers to avoid warnings.
 305
 306         * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
 307         * arc-ext.c: Likewise.
 308
 309 2001-08-28  matthew gren  <mrg@redhat.com>
 310
 311         * ppc-opc.c (icbt): Order correctly.
 312
 313 2001-08-27  David Edelsohn  <dje@watson.ibm.com>
 314             Torbjorn Granlund  <tege@swox.com>
 315
 316         * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
 317         (LS): Define.
 318         (insert_ds): Complain if not a multiple of 4.
 319         (XSYNC): Define.
 320         (XSYNC_MASK): Define.
 321         (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
 322         "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
 323
 324 2001-08-26  Andreas Jaeger  <aj@suse.de>
 325
 326         * h8500-opc.h: Add default initializers to h8500_table to shut up
 327         GCC warnings.
 328
 329 2001-08-25  Andreas Jaeger  <aj@suse.de>
 330
 331         * tic54x-dis.c: Add unused attributes where needed.
 332
 333         * z8k-dis.c (output_instr): Add unused attribute.
 334
 335         * h8300-dis.c: Add missing prototypes.
 336         (bfd_h8_disassemble): Make static.
 337
 338         * cris-dis.c: Add missing prototype.
 339         * h8500-dis.c: Likewise.
 340         * m68hc11-dis.c: Likewise.
 341         * pj-dis.c: Likewise.
 342         * tic54x-dis.c: Likewise.
 343         * v850-dis.c: Likewise.
 344         * vax-dis.c: Likewise.
 345         * w65-dis.c: Likewise.
 346         * z8k-dis.c: Likewise.
 347
 348         * d10v-dis.c: Add missing prototype.
 349         (dis_long): Remove unused variable.
 350         (dis_2_short): Likewise.
 351
 352         * sh-dis.c: Add missing prototypes.
 353         * v850-opc.c: Likewise.
 354         Add unused attributes where needed.
 355
 356         * ns32k-dis.c: Add missing prototypes.
 357         (bit_extract_simple): Remove unused variable.
 358
 359 2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 360
 361         * opcodes/s390-opc.c: Add "low or high" and "not low or high"
 362         branch instructions for gcc 3.0.
 363         * opcodes/s390-opc.txt: Likewise.
 364
 365 2001-08-21  Andreas Jaeger  <aj@suse.de>
 366
 367         * i960-dis.c: Add parameters for prototypes
 368         (ctrl): Add unused attributes.
 369         (cobr): Likewise.
 370         (put_abs): Likewise.
 371
 372         * mips-dis.c: Add missing prototypes.
 373         * a29k-dis.c: Likewise.
 374         * arc-dis.c: Likewise.
 375         * ia64-opc.c: Likewise.
 376
 377         * s390-dis.c: Add missing prototypes.
 378         (init_disasm): Remove unused attribute since the parameter is
 379         used.
 380
 381 2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 382
 383         * mips-opc.c (M1): Define. Reformatted Code.
 384         (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
 385         mtps, mtps. Typo.
 386
 387 2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
 388
 389         * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
 390         the corresponding non-likely insn is in MIPS I.
 391
 392 2001-08-13  Kazu Hirata  <kazu@hxi.com>
 393
 394         * mcore-dis.c: Fix formatting.
 395         * mips-dis.c: Likewise.
 396         * pj-dis.c: Likewise.
 397         * z8k-dis.c: Likewise.
 398
 399 2001-08-12  Richard Henderson  <rth@redhat.com>
 400
 401         * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
 402         to *VALUEP.  Regenerate all cgen files.
 403
 404 2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
 405
 406         * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
 407         argument.
 408         * mips-opc.c (G6): Undefine.
 409         (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
 410         as the first "move" alternative.
 411
 412 2001-08-10  Andreas Jaeger  <aj@suse.de>
 413
 414         * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
 415         to build warnings.
 416         * configure: Regenerate.
 417
 418 2001-08-10  Alan Modra  <amodra@bigpond.net.au>
 419
 420         * ppc-opc.c: Revert 2001-08-08.
 421
 422 2001-08-09  Alan Modra  <amodra@bigpond.net.au>
 423
 424         * dis-buf.c (generic_strcat_address): Add missing prototype.
 425         #if 0 the functions as it is unused.
 426
 427 2001-08-08  Alan Modra  <amodra@bigpond.net.au>
 428
 429         1999-10-25  Torbjorn Granlund  <tege@swox.com>
 430         * ppc-opc.c: Include "bfd.h".
 431         (powerpc_operands): Add new field for reloc type.
 432
 433 2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 434
 435         * mips-dis.c (print_insn_arg): Don't use software integer registers
 436         for coprocessor registers.
 437         (get_mips_isa): Removed.
 438         (is_newabi): New function, checks if NewABI is used.
 439         (_print_insn_mips): Get distinction between old ABI and new ABI right.
 440
 441 2001-08-01  Christian Groessler <cpg@aladdin.de>
 442
 443         * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
 444         get stderr definition.
 445         (internal, gas): Removed warnings.
 446         (gas): Create a correct final entry for created array.
 447         * z8k-opc.h: Recreated with new z8kgen.
 448
 449 2001-07-28  Kazu Hirata  <kazu@hxi.com>
 450
 451         * i386-dis.c: Fix formatting.
 452
 453 2001-07-28  Matthias Kramm <kramm@quiss.org>
 454
 455         * i386-dis.c: Change formatting conventions for architecture
 456         i386:intel to better match the format of various intel i386
 457         assemblers, like nasm, tasm or masm.
 458
 459 2001-07-24  Alan Modra  <amodra@bigpond.net.au>
 460
 461         * Makefile.am: Update dependencies with "make dep-am".
 462         * Makefile.in: Regenerate
 463
 464 2001-07-24  Kazu Hirata  <kazu@hxi.com>
 465
 466         * alpha-dis.c: Fix formatting.
 467         * cris-dis.c: Likewise.
 468         * d10v-dis.c: Likewise.
 469         * d30v-dis.c: Likewise.
 470         * m10300-dis.c: Likewise.
 471         * tic54x-dis.c: Likewise.
 472
 473 2001-07-23  Kazu Hirata  <kazu@hxi.com>
 474
 475         * m68k-dis.c: Fix formatting.
 476         * pj-dis.c: Likewise.
 477         * s390-dis.c: Likewise.
 478         * z8k-dis.c: Likewise.
 479
 480 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
 481
 482         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
 483         into the rest of the surrounding definitions.
 484
 485 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
 486
 487         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
 488         for lgdt, lidt, sgdt, sidt.
 489
 490 2001-07-13  Philip Blundell  <philb@gnu.org>
 491
 492         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
 493
 494 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
 495
 496         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
 497         regex support.
 498         (@arch@_cgen_build_insn_regex): New routine from Graydon.
 499         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
 500         to verify if it is worth parsing the insn as insn "x".  Also update
 501         error message when insn is not a recognized format of the insn vs
 502         when the insn is completely unrecognized.
 503
 504 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
 505
 506         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
 507         bfd_get_bits.
 508         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
 509         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
 510
 511 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
 512
 513         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
 514         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
 515         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
 516
 517 2001-07-05  Ben Elliston  <bje@redhat.com>
 518
 519         * Makefile.am (CPUDIR): Define.
 520         (stamp-m32r): Update dependencies.
 521         (stamp-fr30): Ditto.
 522         (stamp-openrisc): Ditto.
 523         * Makefile.in: Regenerate.
 524
 525 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
 526
 527         * ppc-opc.c: Fix encoding of 'clf' instruction.
 528
 529 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
 530
 531         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
 532
 533 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
 534
 535         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
 536         * cgen-opc.c (cgen_keyword_add): Ignore special first
 537         character when building nonalpha_chars field.
 538
 539 2001-06-24  Ben Elliston  <bje@redhat.com>
 540
 541         * m88k-dis.c: Format to conform to GNU coding standards.
 542
 543 2001-06-23  Andreas Jaeger  <aj@suse.de>
 544
 545         * disassemble.c (disassembler_usage): Add unused attribute.
 546
 547 2001-06-22  Eric Christopher  <echristo@redhat.com>
 548
 549         * mips-opc.c: Move prefx to start of the table.
 550
 551 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
 552
 553         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
 554         instruction.
 555
 556 2001-06-22  Pauli <pauli@moreton.com.au>
 557
 558         * m68k-opc.c: Add wdebug instruction.
 559
 560 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
 561
 562         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
 563
 564 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 565
 566         * cgen-asm.c (cgen_parse_keyword): When looking for the
 567         boundaries of a keyword, allow any special characters
 568         that are actually in one of the allowed keyword.
 569         * cgen-opc.c (cgen_keyword_add): Add any special characters
 570         to the nonalpha_chars field.
 571
 572 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 573
 574         * s390-opc.c: Add lgh instruction.
 575         * s390-opc.txt: Likewise.
 576
 577 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 578
 579         * i386-dis.c: Group function prototypes in one place.
 580         (FLOATCODE): Redefine as 1.
 581         (USE_GROUPS): Redefine as 2.
 582         (USE_PREFIX_USER_TABLE): Redefine as 3.
 583         (X86_64_SPECIAL): Define as 4.
 584         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 585         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 586         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 587         (dis386): New table combining above four tables.
 588         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 589         (dis386_twobyte): New table combining above two tables.
 590         (x86_64_table): New table to handle x86_64.
 591         (X86_64_0): Define.
 592         (float_mem_att, float_mem_intel): Delet.
 593         (float_mem): New table combining above two tables.
 594         (print_insn_i386): Modify for above.
 595         (dofloat): Likewise.
 596         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 597         Return 0 on success, 1 if no valid alternative.
 598         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 599         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 600         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 601         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 602         if not 64-bit mode.
 603         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 604         (OP_I64): If not 64-bit mode, call OP_I.
 605         OP_OFF64): If not 64-bit mode, call OP_OFF.
 606         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 607         'ignore'/'ignored' to 'bytemode'.
 608
 609 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 610
 611         * configure.in: Sort 'ta' case statement.
 612         * configure: Regenerate.
 613
 614         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 615         loop,jcxz insns.
 616         (disx86_64_att): Likewise.
 617         (dis386_twobyte_att): Likewise.
 618         (print_insn_i386): Don't print branch hints as a prefix.
 619         (putop): 'H' macro prints branch hints.
 620         (get64): Kill compile warnings.
 621
 622 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 623
 624         * sh-opc.h (sh_table): Don't use empty initializers.
 625
 626 2001-06-06  Christian Groessler <cpg@aladdin.de>
 627
 628         * z8k-dis.c: Fix formatting.
 629         (unpack_instr): Remove unused cases in switch statement. Add
 630         safety abort() in default case.
 631         (unparse_instr): Add safety abort() in default case.
 632
 633 2001-06-06  Peter Jakubek <pjak@snafu.de>
 634
 635         * m68k-dis.c (print_insn_m68k): Fix typo.
 636         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 637         mcf (ColdFire) div, rem and moveb instructions.
 638
 639 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 640
 641         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 642         (cond_jump_mode, loop_jcxz_mode): Define.
 643         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 644         appropriate, and 'F' suffix to loop insns.
 645         (disx86_64_att): Likewise.
 646         (dis386_twobyte_att): Likewise.
 647         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 648         Output data size prefix for long conditional jumps.  Output cs and
 649         ds branch hints.
 650         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 651         (OP_J): Don't make PREFIX_DATA used.
 652
 653 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 654
 655         * sh-opc.h (sh_table): Complete last element entry to avoid
 656         compiler warning.
 657
 658 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 659
 660         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 661
 662 2001-05-23  Alan Modra  <amodra@one.net.au>
 663
 664         * arc-opc.c: Whitespace changes.
 665
 666 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 667
 668         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 669         last element.
 670
 671 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 672
 673         * cgen-dis.in (extract_normal): Complete support for min<base case.
 674
 675 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 676
 677         * mips-dis.c (INSNLEN): Rename MAXLEN.
 678         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 679         (print_insn_arg): Remove $ prefix of register names.
 680         (set_mips_isa_type): Remove.
 681         (mips_isa_type): New function.
 682         (get_mips_isa): New Function.
 683         (print_insn_mips): Rename _print_insn_mips.
 684         (_print_insn_mips): New function, contains code which was
 685         duplicated in print_insn_big_mips and print_insn_little_mips.
 686         (print_insn_big_mips): Moved code to _print_insn_mips.
 687         (print_insn_little_mips): Likewise.
 688         (print_mips16_insn_arg): Remove $ prefix of register names.
 689         Print error message before abort.
 690
 691 2001-05-14  J.T. Conklin  <jtc@redback.com>
 692
 693         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 694         simplified mnemonics used for setting PPC750-specific special
 695         purpose registers.
 696
 697 2001-05-12  H.J. Lu  <hjl@gnu.org>
 698
 699         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 700         `rm'.
 701
 702 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 703
 704         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 705         register to r/w.  Formatting fixes throughout file.
 706
 707 2001-05-12  Alan Modra  <amodra@one.net.au>
 708
 709         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 710         movq operands.
 711         (twobyte_has_modrm): Update table.
 712         (need_modrm): Give it file scope.
 713         (MODRM_CHECK): Define.
 714         (dofloat): Use MODRM_CHECK.
 715         (OP_E): Likewise.
 716         (OP_EM): Likewise.
 717         (OP_EX): Likewise.
 718
 719 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 720
 721         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 722         even at end of a section.
 723         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 724         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 725
 726 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 727
 728         * disassemble.c (disassembler_usage): Remove unused attribute.
 729
 730 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 731
 732         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 733
 734 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 735
 736         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 737         assume incoming buffer already has the base insn loaded.  Handle
 738         smaller-than-base instructions for variable-length case.
 739
 740 2001-05-04  Alan Modra  <amodra@one.net.au>
 741
 742         * i386-dis.c (Ev, Ed): Remove duplicate define.
 743         (Gd): Define.
 744         (XS): Define.
 745         (OP_XS): New function.
 746         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 747         movmskp operands.
 748         (dis386_twobyte_intel): Likewise.
 749         (prefix_user_table): Use MS for maskmovq operand.
 750
 751 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 752
 753         * Makefile.am: Add OpenRISC target.
 754         * Makefile.in: Regenerated.
 755
 756         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 757
 758         * configure.in (bfd_openrisc_arch): Add target.
 759         * configure: Regenerated.
 760
 761         * openrisc-asm.c: New file.
 762         * openrisc-desc.c: Likewise.
 763         * openrisc-desc.h: Likewise.
 764         * openrisc-dis.c: Likewise.
 765         * openrisc-ibld.c: Likewise.
 766         * openrisc-opc.c: Likewise.
 767         * openrisc-opc.h: Likewise.
 768
 769 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 770
 771         * z8k-dis.c: add names of control registers (ctrl_names);
 772         (seg_length): provides instruction length fixup for segmented
 773         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 774         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 775         (unparse_intr): handle CLASS_PR, print addresses without '#'
 776         * z8k-opc.h: re-created with new z8kgen
 777         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 778         entries for ldctl/ldctlb instruction
 779
 780 2001-04-06  Andreas Jaeger  <aj@suse.de>
 781
 782         * i386-dis.c: Add ffreep instruction.
 783
 784 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 785
 786         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 787
 788 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 789
 790         * i386-dis.c (PREGRP25): Define.
 791         (dis386_twobyte_att): Use here in place of "movntq" entry.
 792         (dis386_twobyte_intel): Likewise.
 793         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 794         (PREGRP26): Define.
 795         (dis386_twobyte_att): Use here.
 796         (dis386_twobyte_intel): Likewise.
 797         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 798         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 799         (prefix_user_table): Cosmetic changes to "bad" entries.
 800
 801 2001-03-23  Nick Clifton  <nickc@redhat.com>
 802
 803         * mips-opc.c: Remove extraneous whitespace.
 804         * mips-dis.c: Remove extraneous whitespace.
 805
 806 2001-03-22  Ben Elliston  <bje@redhat.com>
 807
 808         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 809         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 810         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 811         to allay a compiler warning.
 812
 813 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 814
 815         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 816         (dis386_twobyte_intel): Likewise.
 817         (twobyte_has_modrm): Set entry for paddq, psubq.
 818
 819 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 820
 821         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 822         determination via CGEN_COMPUTE_MACH.
 823         * fr30-desc.c: Regenerate.
 824         * fr30-dis.c: Regenerate.
 825         * fr30-opc.h: Regenerate.
 826         * m32r-desc.c: Regenerate.
 827         * m32r-dis.c: Regenerate.
 828         * m32r-opc.h: Regenerate.
 829         * m32r-opinst.c: Regenerate.
 830
 831 2001-03-20  H.J. Lu  <hjl@gnu.org>
 832
 833         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 834         * configure: Rebuild.
 835
 836 2001-03-19  Jim Wilson  <wilson@redhat.com>
 837
 838         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 839         notestr if larger than xsect.
 840         (in_class): Handle format M5.
 841         * ia64-asmtab.c: Regnerate.
 842
 843 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 844
 845         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 846         has more than one byte left to read.
 847
 848 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 849
 850         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 851         * s390-opc.txt: Add new opcodes.
 852
 853 2001-03-06  Nick Clifton  <nickc@redhat.com>
 854
 855         * arm-dis.c (print_insn_thumb): Compute destination address
 856         of BLX(1) instruction by taking bit 1 from PC and not from bit
 857         0 of the offset.
 858
 859 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 860
 861         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 862         so command line switches will work.
 863
 864 2001-03-05  Dave Brolley  <brolley@redhat.com>
 865
 866         * fr30-asm.c: Regenerate.
 867         * fr30-desc.c: Regenerate.
 868         * fr30-desc.h: Regenerate.
 869         * fr30-dis.c: Regenerate.
 870         * fr30-ibld.c: Regenerate.
 871         * fr30-opc.c: Regenerate.
 872         * fr30-opc.h: Regenerate.
 873         * m32r-asm.c: Regenerate.
 874         * m32r-desc.c: Regenerate.
 875         * m32r-desc.h: Regenerate.
 876         * m32r-dis.c: Regenerate.
 877         * m32r-ibld.c: Regenerate.
 878         * m32r-opc.c: Regenerate.
 879         * m32r-opc.h: Regenerate.
 880         * m32r-opinst.c: Regenerate.
 881
 882 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 883
 884         * m68k-opc.c: fix cpushl according to Motorola. Enable
 885         bunch of instructions for Coldfire 5407 and add all new.
 886
 887 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 888
 889         * configure.in (BFD_VERSION): Do without grep.
 890         * configure: Regenerate.
 891         * Makefile.am: Run "make dep-am".
 892         * Makefile.in: Regenerate.
 893
 894 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 895
 896         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 897         * ia64-asmtab.c: Regenerate.
 898
 899 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 900
 901         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 902         separate variants: one for IMM22 and the other for IMM14.
 903         * ia64-asmtab.c: Regenerate.
 904
 905 2001-02-21  Greg McGary  <greg@mcgary.org>
 906
 907         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 908
 909 2001-02-20  H.J. Lu  <hjl@gnu.org>
 910
 911         * Makefile.am (ia64-ic.tbl): Remove the target.
 912         (ia64-raw.tbl): Likewise.
 913         (ia64-waw.tbl): Likewise.
 914         (ia64-war.tbl): Likewise.
 915         (ia64-asmtab.c): Generate it in the source directory.
 916         * Makefile.in: Regenerated.
 917
 918 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 919
 920         * Makefile.am: Add PDP-11 target.
 921         * configure.in: Likewise.
 922         * disassemble.c: Likewise.
 923         * pdp11-dis.c: New file.
 924         * pdp11-opc.c: New file.
 925
 926 2001-02-14  Jim Wilson  <wilson@redhat.com>
 927
 928         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 929         * ia64-asmtab.c: Regenerate.
 930
 931 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 932
 933         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 934         instructions.
 935         (putop): Handle 'Y'
 936
 937 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 938
 939         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 940         the following instruction not of the jump itself for the jump
 941         target.
 942         (print_mips16_insn_arg): Likewise.
 943
 944 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 945
 946         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 947         directory.
 948         * Makefile.in: Regenerate.
 949
 950 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 951
 952         * Makefile.am: Add linux target for S/390.
 953         * Makefile.in: Likewise.
 954         * configure.in: Likewise.
 955         * disassemble.c: Likewise.
 956         * s390-dis.c: New file.
 957         * s390-mkopc.c: New file.
 958         * s390-opc.c: New file.
 959         * s390-opc.txt: New file.
 960
 961 2001-02-05  Jim Wilson  <wilson@redhat.com>
 962
 963         * ia64-asmtab.c: Revert 2000-12-16 change.
 964
 965 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 966
 967         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 968         * m32r-desc.h: Regenerate.
 969
 970 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 971
 972         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 973         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 974
 975 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 976
 977         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 978
 979 2001-01-13  Nick Clifton  <nickc@redhat.com>
 980
 981         * disassemble.c: Remove spurious white space.
 982
 983 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 984
 985         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 986         templates.
 987
 988 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 989
 990         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 991         * Makefile.am (C_FILES): Add arc-ext.c.
 992         (ALL_MACHINES) Add arc-ext.lo.
 993         (INCLUDES) Add opcode directory to list.
 994         New dependency entry for arc-ext.lo.
 995         * disassemble.c (disassembler): Correct call to
 996         arc_get_disassembler.
 997         * arc-opc.c: New update for ARC, including full base
 998         instructions for ARC variants.
 999         * arc-dis.h, arc-dis.c: New update for ARC, including
1000         extensibility functionality.
1001         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1002
1003 2001-01-10  Jan Hubicka  <jh@suse.cz>
1004
1005         * i386-dis.c (PREGRP15 - PREGRP24): New.
1006         (dis386_twobyt): Add SSE2 instructions.
1007         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1008         (twobyte_uses_f3_prefix): ... this one.
1009         (grps): Add SSE instructions.
1010         (prefix_user_table): Add two new slots; add SSE2 instructions.
1011         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1012         Handle the REPNZ and Data16 prefixes as well; do proper lookup
1013         to prefix_user_table.
1014         (OP_E): Accept mfence and lfence as well.
1015         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1016         (OP_XMM): Support REX extensions.
1017         (OP_EM): Likewise.
1018         (OP_EX): Likewise.
1019
1020 2001-01-09  Nick Clifton  <nickc@redhat.com>
1021
1022         * arm-dis.c (print_insn): Set pc to zero for instructions with
1023         a reloc associated with them.
1024
1025 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1026
1027         * cgen-asm.in (parse_insn_normal): Changed syn to be
1028         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1029         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1030         to '\0' to use 0 instead.
1031         * cgen-dis.in (print_insn_normal): Ditto.
1032         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1033
1034 2001-01-05  Jan Hubicka  <jh@suse.cz>
1035
1036         * i386-dis.c: Add x86_64 support.
1037         (rex): New static variable.
1038         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1039         (USED_REX): New macro.
1040         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1041         (OP_I64, OP_OFF64, OP_IMREG): New functions.
1042         (OP_REG, OP_OFF): Declare.
1043         (get64, get32, get32s): New functions.
1044         (r??_reg): New constants.
1045         (dis386_att): Change templates of instruction implicitly promoted
1046         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1047         (grps): Likewise.
1048         (dis386_intel): Likewise.
1049         (dixx86_64_att): New table based on dis386_att.
1050         (dixx86_64_intel): New table based on dis386_intel.
1051         (names64, names8rex): New global variable.
1052         (names32, names16): Add extended registers.
1053         (prefix_user_t): Recognize rex prefixes.
1054         (prefix_name): Print REX prefixes nicely.
1055         (op_riprel): New global variable.
1056         (start_pc): Set type to bfd_vma.
1057         (print_insn_i386): Detect the 64bit mode and use proper table;
1058         move ckprefix after initializing the buffer; output unused rex prefixes;
1059         output information about target of RIP relative addresses.
1060         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1061         (print_operand_value): New function.
1062         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1063         REX prefix and new modes.
1064         (get64, get32s): New.
1065         (get32): Return bfd_signed_vma type.
1066         (set_op): Initialize the op_riprel.
1067         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1068
1069 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1070
1071          cgen-dis.in (read_insn): Use bfd_get_bits()
1072
1073 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1074
1075         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1076         (hash_insn_list): Likewise
1077         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1078         (extract_1): Use bfd_get_bits().
1079         (extract_normal): Apply sign extension to both extraction
1080         methods.
1081         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1082         (cgen_put_insn_value): Use bfd_put_bits()
1083
1084 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1085
1086         * cgen-asm.in (parse_insn_normal): Print better error message for
1087         instructions with missing operands.
1088
1089 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
1090
1091         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1092
1093 2000-12-16  Nick Clifton  <nickc@redhat.com>
1094
1095         * Makefile.in: Regenerate.
1096         * aclocal.m4: Regenerate.
1097         * config.in: Regenerate.
1098         * configure.in: Add spacing.
1099         * configure: Regenerate.
1100         * ia64-asmtab.c: Regenerate.
1101         * po/opcodes.pot: Regenerate.
1102
1103 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1104
1105         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1106         error messages over later parse-time ones.
1107
1108 2000-12-12  Jim Wilson  <wilson@redhat.com>
1109
1110         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1111         argument.
1112         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1113         (print_dependency_table): Print NULL if semantics field not set.
1114         (insert_opcode_dependencies): Mark cmp parameter as unused.
1115         (print_main_table): Use fprintf_vma to print long long fields.
1116         (main): Mark argv paramter as unused.  Convert to old style definition.
1117         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1118         * ia64-asmtab.c: Regnerate.
1119
1120 2000-12-09  Nick Clifton  <nickc@redhat.com>
1121
1122         * m32r-dis.c (print_insn): Prevent re-read of instruction from
1123         wrong address.
1124
1125         * fr30-dis.c: Regenerate.
1126
1127 2000-12-08  Peter Targett  <peter.targett@arccores.com>
1128
1129         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1130         * Makefile.am (C_FILES): Add arc-ext.c.
1131         (ALL_MACHINES) Add arc-ext.lo.
1132         (INCLUDES) Add opcode directory to list.
1133         New dependency entry for arc-ext.lo.
1134         * disassemble.c (disassembler): Correct call to
1135         arc_get_disassembler.
1136         * arc-opc.c: New update for ARC, including full base
1137         instructions for ARC variants.
1138         * arc-dis.h, arc-dis.c: New update for ARC, including
1139         extensibility functionality.
1140         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1141
1142 2000-12-03  Chris Demetriou   cgd@sibyte.com
1143
1144         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1145         MOD_HILO, and MOD_LO macros.
1146
1147         * mips-opc.c (M1, M2): Delete.
1148         (mips_builtin_opcodes): Remove all uses of M1.
1149
1150         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1151         instructions take "G" format second operands and use the
1152         correct flags.
1153         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1154         match.
1155         Delete "sel" code operands from mfc1 and mtc1.
1156         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1157         for dm[ft]c[023].
1158
1159 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1160             Chris Demetriou   cgd@sibyte.com
1161
1162         * mips-opc.c (mips_builtin_opcodes): Finish additions
1163         for MIPS32 support, and clean up existing entries for
1164         aesthetics, consistency with the MIPS32 ISA, and
1165         with consistency the rest of the table.
1166
1167 2000-12-01  Nick Clifton  <nickc@redhat.com>
1168
1169         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1170         field.
1171
1172 2000-12-01  Chris Demetriou <cgd@sibyte.com>
1173
1174         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1175         specifiers.  Update 'B' for new constant names, and remove
1176         'm'.
1177         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1178         near the top of the array, so they are disassembled properly.
1179         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1180         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1181         specifier.  Add 'H' format specifier variants for "mfc1,"
1182         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1183         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1184         "wait" variant which uses 'J' operand specifier.
1185
1186         * mips-dis.c (set_mips_isa_type): Update to use
1187         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1188         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1189         * mips-opc.c (I32): New constant for instructions added in
1190         MIPS32.
1191         (P4): Delete.
1192         (mips_builtin_opcodes) Replace all uses of P4 with I32.
1193
1194         * mips-dis.c (set_mips_isa_type): Add cases for
1195         bfd_mach_mips5 and bfd_mach_mips64.
1196         * mips-opc.c (I64): New definitions.
1197
1198         * mips-dis.c (set_mips_isa_type): Add case for
1199         bfd_mach_mips_sb1.
1200
1201 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1202
1203         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1204         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1205         Initialize variable dc to NULL.
1206         (print_insn_shx): Remove unused label d_reg_n.
1207
1208 2000-11-24  Nick Clifton  <nickc@redhat.com>
1209
1210         * arm-opc.h: Add new opcode formatting parameter 'B'.
1211         (arm_opcodes): Add XScale, v5, and v5te instructions.
1212         (thumb_opcodes): Add v5t instructions.
1213
1214         * arm-dis.c (print_insn_arm): Handle new 'B' format
1215         parameter.
1216         (print_insn_thumb): Decode BLX(1) instruction.
1217
1218 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
1219
1220         * mips-opc.c: Fix file header comment.
1221
1222 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1223
1224         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1225         print_insn_cris_with_register_prefix.
1226
1227 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1228
1229         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1230
1231 2000-11-07  Matthew Green  <mrg@redhat.com>
1232
1233         * cgen-dis.in (print_insn): All insns which can fit into insn_value
1234         must be loaded there in their entirety.
1235
1236 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
1237
1238         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1239         (compute_arch_mask): Add v8plusb and v9b machines.
1240         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1241         * sparc-opc.c: Support for Cheetah instruction set.
1242         (prefetch_table): Add #invalidate.
1243
1244 2000-10-16  Nick Clifton  <nickc@redhat.com>
1245
1246         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1247
1248 2000-10-06  Dave Brolley  <brolley@redhat.com>
1249
1250         * fr30-desc.h: Regenerate.
1251         * m32r-desc.h: Regenerate.
1252         * m32r-ibld.c: Regenerate.
1253
1254 2000-10-05  Jim Wilson  <wilson@redhat.com>
1255
1256         * ia64-ic.tbl: Update from Intel.
1257         * ia64-asmtab.c: Regenerate.
1258
1259 2000-10-04  Kazu Hirata  <kazu@hxi.com>
1260
1261         * ia64-gen.c: Convert C++-style comments to C-style comments.
1262         * tic54x-dis.c: Likewise.
1263
1264 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1265
1266         Changes to add dollar prefix to registers for files where user symbols
1267         don't have a leading underscore.  Fix formatting.
1268         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1269         (format_reg): Add parameter with_reg_prefix.  All callers changed.
1270         (print_with_operands): Ditto.
1271         (print_insn_cris_generic): Renamed from print_insn_cris, add
1272         parameter with_reg_prefix.
1273         (print_insn_cris_with_register_prefix,
1274         print_insn_cris_without_register_prefix, cris_get_disassembler):
1275         New.
1276         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1277
1278 2000-09-22  Jim Wilson  <wilson@redhat.com>
1279
1280         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1281         gt, ge, ngt, and nge.
1282         * ia64-asmtab.c: Regenerate.
1283
1284         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1285         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1286         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1287         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1288         * ia64-asmtab.c: Regnerate.
1289
1290 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
1291
1292         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1293         Add mfc0 and mtc0 with sub-selection values.
1294         Add clo and clz opcodes.
1295         Add msub and msubu instructions for MIPS32.
1296         Add madd/maddu aliases for mad/madu for MIPS32.
1297         Support wait, deret, eret, movn, pref for MIPS32.
1298         Support tlbp, tlbr, tlbwi, tlbwr.
1299         (P4): New define.
1300
1301         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1302         (print_insn_arg): Handle 'H' args.
1303         (set_mips_isa_type): Recognize 4K.
1304         Use CPU_* defines instead of hardcoded numbers.
1305
1306 2000-09-11  Catherine Moore <clm@redhat.com>
1307
1308         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1309         (d30v_format_tab): Use Rb2 for modinc and moddec.
1310
1311 2000-09-07  Catherine Moore  <clm@redhat.com>
1312
1313         * d30v-opc.c (d30v_format_tab): Use format Ra for
1314         modinc and moddec.
1315
1316 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1317
1318         * configure: Rebuilt with new libtool.m4.
1319
1320 2000-09-05  Nick Clifton  <nickc@redhat.com>
1321
1322         * configure: Regenerate.
1323         * po/opcodes.pot: Regenerate.
1324
1325 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1326
1327         * acinclude.m4: Include libtool and gettext macros from the
1328         top level.
1329         * aclocal.m4, configure: Rebuilt.
1330
1331 2000-08-30  Kazu Hirata  <kazu@hxi.com>
1332
1333         * tic80-dis.c: Fix formatting.
1334
1335 2000-08-29  Kazu Hirata  <kazu@hxi.com>
1336
1337         * w65-dis.c: Fix formatting.
1338
1339 2000-08-28  Mark Hatle  <mhatle@mvista.com>
1340
1341         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1342         (powerpc_opcodes): Add table entries for PPC 405 instructions.
1343         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1344         instructions.  Added extended mnemonic mftbl as defined in the
1345         405GP manual for all PPCs.
1346
1347 2000-08-28  Jim Wilson  <wilson@redhat.com>
1348
1349         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1350         call.  Change last goto to use failed instead of done.
1351
1352 2000-08-28  Dave Brolley  <brolley@redhat.com>
1353
1354         * cgen-ibld.in (cgen_put_insn_int_value): New function.
1355         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1356         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1357         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1358         * cgen-dis.in (read_insn): New static function.
1359         (print_insn): Use read_insn to read the insn into the buffer and set
1360         up for disassembly.
1361         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1362         in the buffer.
1363         * fr30-asm.c: Regenerated.
1364         * fr30-desc.c: Regenerated.
1365         * fr30-desc.h: Regenerated.
1366         * fr30-dis.c: Regenerated.
1367         * fr30-ibld.c: Regenerated.
1368         * fr30-opc.c: Regenerated.
1369         * fr30-opc.h: Regenerated.
1370         * m32r-asm.c: Regenerated.
1371         * m32r-desc.c: Regenerated.
1372         * m32r-desc.h: Regenerated.
1373         * m32r-dis.c: Regenerated.
1374         * m32r-ibld.c: Regenerated.
1375         * m32r-opc.c: Regenerated.
1376
1377 2000-08-28  Kazu Hirata  <kazu@hxi.com>
1378
1379         * tic30-dis.c: Fix formatting.
1380
1381 2000-08-27  Kazu Hirata  <kazu@hxi.com>
1382
1383         * sh-dis.c: Fix formatting.
1384
1385 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
1386
1387         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1388
1389 2000-08-24  Kazu Hirata  <kazu@hxi.com>
1390
1391         * z8k-dis.c: Fix formatting.
1392
1393 2000-08-16  Jim Wilson  <wilson@redhat.com>
1394
1395         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1396         break, mov-immediate, nop.
1397         * ia64-opc-f.c: Delete fpsub instructions.
1398         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1399         address operand.  Rewrite using macros to avoid long lines.
1400         * ia64-opc.h (POSTINC): Define.
1401         * ia64-asmtab.c: Regenerate.
1402
1403 2000-08-15  Jim Wilson  <wilson@redhat.com>
1404
1405         * ia64-ic.tbl: Add missing entries.
1406
1407 2000-08-08  Jason Eckhardt  <jle@redhat.com>
1408
1409         * i860-dis.c (print_br_address): Change third argument from int
1410         to long.
1411
1412 2000-08-07  Richard Henderson  <rth@redhat.com>
1413
1414         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1415         for MLI templates.  Handle IA64_OPND_TGT64.
1416
1417 2000-08-04  Ben Elliston  <bje@redhat.com>
1418
1419         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1420         * cgen.sh: Likewise.
1421
1422 2000-08-02  Jim Wilson  <wilson@redhat.com>
1423
1424         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1425
1426 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1427
1428         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1429         Change return type from void to int.  Check the combination
1430         of operands, return 1 if valid.  Fix to avoid BUF overflow.
1431         Report undefined combinations of operands in COMMENT.
1432         Report internal errors to stderr.  Output the adiw/sbiw
1433         constant operand in both decimal and hex.
1434         (print_insn_avr): Disassemble ldd/std with displacement of 0
1435         as ld/st.  Check avr_operand () return value, handle invalid
1436         combinations of operands like unknown opcodes.
1437
1438 2000-07-28  Ben Elliston  <bje@redhat.com>
1439
1440         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1441         (run-cgen, stamp-m32r, stamp-fr30): New targets.
1442         * Makefile.in: Regenerate.
1443         * configure.in: Add --enable-cgen-maint option.
1444         * configure: Regenerate.
1445
1446 2000-07-26  Dave Brolley  <brolley@redhat.com>
1447
1448         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1449         (cgen_hw_lookup_by_num): Ditto.
1450         (cgen_operand_lookup_by_name): Ditto.
1451         (print_address): Ditto.
1452         (print_keyword): Ditto.
1453         * cgen-dis.c (hash_insn_array): Mark unused parameters with
1454         ATTRIBUTE_UNUSED.
1455         * cgen-asm.c (hash_insn_array): Mark unused parameters with
1456         ATTRIBUTE_UNUSED.
1457         (cgen_parse_keyword): Ditto.
1458
1459 2000-07-22  Jason Eckhardt  <jle@redhat.com>
1460
1461         * i860-dis.c: New file.
1462         (print_insn_i860): New function.
1463         (print_br_address): New function.
1464         (sign_extend): New function.
1465         (BITWISE_OP): New macro.
1466         (I860_REG_PREFIX): New macro.
1467         (grnames, frnames, crnames): New structures.
1468
1469         * disassemble.c (ARCH_i860): Define.
1470         (disassembler): Add check for bfd_arch_i860 to set disassemble
1471         function to print_insn_i860.
1472
1473         * Makefile.in (CFILES): Added i860-dis.c.
1474         (ALL_MACHINES): Added i860-dis.lo.
1475         (i860-dis.lo): New dependences.
1476
1477         * configure.in: New bits for bfd_i860_arch.
1478
1479         * configure: Regenerated.
1480
1481 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1482
1483         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1484         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1485         (cris-dis.lo, cris-opc.lo): New rules.
1486         * Makefile.in: Rebuild.
1487         * configure.in (bfd_cris_arch): New target.
1488         * configure: Rebuild.
1489         * disassemble.c (ARCH_cris): Define.
1490         (disassembler): Support ARCH_cris.
1491         * cris-dis.c, cris-opc.c: New files.
1492         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1493
1494 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1495
1496         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1497         Reported by Bill Clarke <llib@computer.org>.
1498
1499 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1500
1501         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1502         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1503
1504 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1505
1506         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1507         fput_const, extract_3, extract_5_load, extract_5_store,
1508         extract_5r_store, extract_5R_store, extract_10U_store,
1509         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1510         extract_12, extract_17, extract_22): Prototype.
1511         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1512         shadowing outer block.
1513         (GET_BIT): Define.
1514
1515 2000-07-05  DJ Delorie  <dj@redhat.com>
1516
1517         * MAINTAINERS: new
1518
1519 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1520
1521         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1522
1523 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1524
1525         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1526         marked for translation (exception from the usual coding style).
1527         (print_insn_avr): Initialize insn2 to avoid warnings.
1528
1529 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1530
1531         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1532         * h8500-dis.c: Fix formatting.
1533
1534 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1535
1536         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1537         (CLEANFILES): Add DEPA.
1538         * Makefile.in: Regenerate.
1539
1540 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1541
1542         * arm-dis.c (regnames): Add an additional register set to match
1543         the set used by GCC.  Make it the default.
1544
1545 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1546
1547         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1548         find one.
1549         * Makefile.in: Regenerate.
1550
1551 2000-06-20  H.J. Lu  <hjl@gnu.org>
1552
1553         * Makefile.am: Rebuild dependency.
1554         * Makefile.in: Rebuild.
1555
1556 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1557
1558         * Makefile.in, configure: regenerate
1559         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1560         ARCH_m68hc11.
1561         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1562         New functions.
1563         * configure.in: Recognize m68hc12 and m68hc11.
1564         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1565         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1566         and opcode generation for m68hc11 and m68hc12.
1567
1568 2000-06-16  Nick Duffek  <nsd@redhat.com>
1569
1570         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1571         bfd_mach_ppc_620 instead of 620.
1572
1573 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1574
1575         * h8300-dis.c: Fix formatting.
1576         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1577         correctly.
1578
1579 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1580
1581         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1582
1583 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1584
1585         * avr-dis.c: completely rewritten.
1586
1587 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1588
1589         * h8300-dis.c: Follow the GNU coding style.
1590         (bfd_h8_disassemble) Fix a typo.
1591
1592 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1593
1594         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1595         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1596         correctly.  Fix a typo.
1597
1598 2000-05-31  Nick Clifton  <nickc@redhat.com>
1599
1600         * opintl.h (_(String)): Explain why dgettext is used instead of
1601         gettext.
1602
1603 2000-05-30  Nick Clifton  <nickc@redhat.com>
1604
1605         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1606         bindtextdomain): Replace defines with those from intl/libgettext.h
1607         to quieten gcc warnings.
1608
1609 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1610
1611         * Makefile.am: Update dependencies with "make dep-am"
1612         * Makefile.in: Regenerate.
1613
1614 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1615
1616         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1617         sign-extending operands.
1618
1619 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1620
1621         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1622         except brf's.
1623
1624 2000-05-21  Nick Clifton  <nickc@redhat.com>
1625
1626         * Makefile.am (LIBIBERTY): Define.
1627
1628 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1629
1630         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1631         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1632         (reg_names): Rename to std_reg_names. Change it to a char **
1633         static variable.
1634         (std_reg_names): New name for reg_names.
1635         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1636         default.
1637
1638 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1639
1640         * fr30-desc.h: Partially regenerated to account for changed
1641         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1642         * m32r-desc.h: Ditto.
1643
1644 2000-05-15  Nick Clifton  <nickc@redhat.com>
1645
1646         * arm-opc.h: Use upper case for flasg in MSR and MRS
1647         instructions.  Allow any bit to be set in the field_mask of
1648         the MSR instruction.
1649
1650         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1651         field_mask of an MSR instruction.
1652
1653 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1654
1655         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1656         instructions changed to ldrsb/ldrsh.
1657
1658 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1659
1660         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1661         target addresses for 'jal' and 'j'.
1662
1663 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1664
1665         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1666         also available in common mode when powerpc syntax is being used.
1667
1668 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1669
1670         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1671         (dummy_print_address): Ditto.
1672
1673 2000-05-04  Timothy Wall  <twall@redhat.com>
1674
1675         * tic54x-opc.c: New.
1676         * tic54x-dis.c: New.
1677         * disassemble.c (disassembler): Add ARCH_tic54x.
1678         * configure.in: Added tic54x target.
1679         * configure: Ditto.
1680         * Makefile.am: Add tic54x dependencies.
1681         * Makefile.in: Ditto.
1682
1683 2000-05-03  J.T. Conklin  <jtc@redback.com>
1684
1685         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1686         vector unit operands.
1687         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1688         unit instruction formats.
1689         (PPCVEC): New macro, mask for vector instructions.
1690         (powerpc_operands): Add table entries for above operand types.
1691         (powerpc_opcodes): Add table entries for vector instructions.
1692
1693         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1694         (print_insn_little_powerpc): Likewise.
1695         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1696
1697 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1698
1699         * configure.in: Add bfd_powerpc_64_arch.
1700         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1701         64 bit code.
1702
1703 2000-04-24  Nick Clifton  <nickc@redhat.com>
1704
1705         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1706         field.
1707
1708 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1709
1710         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1711         FMUL instruction.
1712         (reg_fmul_r): New. Extract source register from FMUL instruction.
1713         (reg_muls_d): New. Extract destination register from MULS instruction.
1714         (reg_muls_r): New. Extract source register from MULS instruction.
1715         (reg_movw_d): New. Extract destination register from MOVW instruction.
1716         (reg_movw_r): New. Extract source register from MOVW instruction.
1717         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1718         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1719
1720 2000-04-22  Timothy Wall  <twall@redhat.com>
1721
1722         * ia64-gen.c (general): Add an ordered table of primary
1723         opcode names, as well as priority fields to disassembly data
1724         structures to enforce a preferred disassembly format based on the
1725         ordering of the opcode tables.
1726         (load_insn_classes): Show a useful message if IC tables are missing.
1727         (load_depfile): Ditto.
1728         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1729         distinguish preferred disassembly.
1730         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1731         format.  Fix incorrect flag on fma.s/fma.s.s0.
1732         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1733         the highest priority.
1734         * ia64-opc-b.c: Use more abbreviations.
1735         * ia64-asmtab.c: Regenerate.
1736
1737 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1738
1739         * hppa-dis.c (extract_16): New function.
1740         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1741         new operand types l,y,&,fe,fE,fx.
1742
1743 2000-04-21  Richard Henderson  <rth@redhat.com>
1744             David Mosberger  <davidm@hpl.hp.com>
1745             Timothy Wall <twall@redhat.com>
1746             Bob Manson  <manson@charmed.cygnus.com>
1747             Jim Wilson  <wilson@redhat.com>
1748
1749         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1750         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1751         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1752         ia64-asmtab.c.
1753         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1754         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1755         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1756         * Makefile.in: Rebuild.
1757         * configure Rebuild.
1758         * configure.in (bfd_ia64_arch): New target.
1759         * disassemble.c (ARCH_ia64): Define.
1760         (disassembler): Support ARCH_ia64.
1761         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1762         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1763         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1764         ia64-war.tbl, ia64-waw.tbl: New files.
1765
1766 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1767
1768         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1769         (disassemble): Use them.
1770
1771 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1772
1773         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1774         * Makefile.am: Update dependencies.
1775         * Makefile.in: Regenerate.
1776
1777 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1778
1779         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1780         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1781         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1782         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1783         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1784         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1785         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1786         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1787         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1788         ansidecl.h as sysdep.h includes it.
1789
1790 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1791
1792         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1793         --enable-build-warnings option.
1794         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1795         * Makefile.in, configure: Re-generate.
1796
1797 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1798
1799         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1800         stc GBR,@-<REG_N> is available for arch_sh1_up.
1801         Group parallel processing insn with identical mnemonics together.
1802         Make three-operand psha / pshl come first.
1803
1804 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1805
1806         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1807         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1808         (sh_arg_type): Add A_PC.
1809         (sh_table): Update entries using immediates.  Add repeat.
1810         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1811         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1812
1813 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1814
1815         * po/opcodes.pot: Regenerate.
1816
1817         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1818         (DEP): Quote when passing vars to sub-make.  Add warning message
1819         to end.
1820         (DEP1): Rewrite for "gcc -MM".
1821         (CLEANFILES): Add DEP2.
1822         Update dependencies.
1823         * Makefile.in: Regenerate.
1824
1825 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1826
1827         * avr-dis.c: Syntax cleanup.
1828         (add0fff): Print the pc relative address as a signed number.
1829         (add03f8): Likewise.
1830
1831 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1832
1833         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1834         the parameter ATTRIBUTE_UNUSED.
1835         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1836
1837 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1838
1839         * m10300-opc.c: SP-based offsets are always unsigned.
1840
1841 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1842
1843         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1844         [branch always] instead of "undefined".
1845
1846 2000-03-27  Nick Clifton  <nickc@redhat.com>
1847
1848         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1849         short instructions, from end of list of long instructions.
1850
1851 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1852
1853         * Makefile.am (CFILES): Add avr-dis.c.
1854         (ALL_MACHINES): Add avr-dis.lo.
1855
1856 2000-03-27  Alan Modra  <alan@linuxcare.com>
1857
1858         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1859         truncate integers.
1860         (print_insn_avr): Call function via pointer in K&R compatible way.
1861         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1862         add0fff, add03f8): Convert to old style function declaration and
1863         add prototype.
1864         (avrdis_opcode): Add prototype.
1865
1866 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1867
1868         * avr-dis.c: New file.  AVR disassembler.
1869         * configure.in (bfd_avr_arch): New architecture support.
1870         * disassemble.c: Likewise.
1871         * configure: Regenerate.
1872
1873 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1874
1875         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1876
1877 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1878
1879         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1880         flag to determine if operand is pc-relative.
1881         * d30v-opc.c:
1882         (d30v_format_table):
1883         (REL6S3): Renamed from IMM6S3.
1884         Added flag OPERAND_PCREL.
1885         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1886         added flag OPERAND_PCREL.
1887         (IMM12S3U): Replaced with REL12S3.
1888         (SHORT_D2, LONG_D): Delay target is pc-relative.
1889         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1890         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1891         using the REL* operands.
1892         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1893         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1894         LONG_Db, using REL* operands.
1895         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1896         (d30v_opcode_table): Use new *r formats.
1897
1898 2000-02-28  Nick Clifton  <nickc@redhat.com>
1899
1900         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1901         'signed_overflow_ok_p'.
1902
1903 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1904
1905         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1906         name of the libtool directory.
1907         * Makefile.in: Rebuild.
1908
1909 2000-02-24  Nick Clifton  <nickc@redhat.com>
1910
1911         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1912         (cgen_clear_signed_overflow_ok): New function.
1913         (cgen_signed_overflow_ok_p): New function.
1914
1915 2000-02-23  Andrew Haley  <aph@redhat.com>
1916
1917         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1918         m32r-ibld.c, m32r-opc.h: Rebuild.
1919
1920 2000-02-23  Linas Vepstas <linas@linas.org>
1921
1922         * i370-dis.c, i370-opc.c: New.
1923
1924         * disassemble.c (ARCH_i370): Define.
1925         (disassembler): Handle it.
1926
1927         * Makefile.am: Add support for Linux/IBM 370.
1928         * configure.in: Likewise.
1929
1930         * Makefile.in: Regenerate.
1931         * configure: Likewise.
1932
1933 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1934
1935         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1936         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1937         procedure.
1938
1939 2000-02-22  Andrew Haley  <aph@redhat.com>
1940
1941         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1942         force gp32 to zero.
1943         * mips-opc.c (G6): New define.
1944         (mips_builtin_op): Add "move" definition for -gp32.
1945
1946 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1947
1948         From Grant Erickson <gerickso@Brocade.COM>:
1949         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1950
1951 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1952
1953         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1954         vars to unsigned.
1955
1956 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1957
1958         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1959         (print_insn_ppi): Likewise.
1960         (print_insn_shx): Use info->mach to select appropriate insn set.
1961         Add support for sh-dsp.  Remove FD_REG_N support.
1962         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1963         (sh_arg_type): Likewise.  Remove FD_REG_N.
1964         (sh_dsp_reg_nums): New enum.
1965         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1966         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1967         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1968         (arch_sh3_dsp_up): Likewise.
1969         (sh_opcode_info): New field: arch.
1970         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1971         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1972
1973 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1974
1975         * arm-dis.c: Change flavor name from atpcs-special to
1976         special-atpcs to prevent name conflict in gdb.
1977         (get_arm_regname_num_options, set_arm_regname_option,
1978         get_arm_regnames): New functions.  API to access the several
1979         flavor of register names.  Note: Used by gdb.
1980         (print_insn_thumb): Use the register name entry from the currently
1981         selected flavor for LR and PC.
1982
1983 2000-02-10  Nick Clifton  <nickc@redhat.com>
1984
1985         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1986         classes.
1987         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1988         "mulsh.h" instructions.
1989         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1990         classes.
1991         (print_insn_mcore): Add support for little endian targets.
1992         Add support for MULSH and OPSR classes.
1993
1994 2000-02-07  Nick Clifton  <nickc@redhat.com>
1995
1996         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1997         Previous delat did not take.
1998
1999 2000-02-03  Timothy Wall  <twall@redhat.com>
2000
2001         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
2002         to adjust target address bounds checking and calculate the
2003         appropriate octet offset into data.
2004
2005 2000-01-27  Nick Clifton  <nickc@redhat.com>
2006
2007         * arm-dis.c: (parse_disassembler_option): Rename to
2008         parse_arm_disassembler_option and allow to be exported.
2009
2010         * disassemble.c (disassembler_usage): New function: Print out any
2011         target specific disassembler options.
2012         Call arm_disassembler_options() if the ARM architecture is being
2013         supported.
2014
2015         * arm-dis.c (NUM_ELEM): Define this macro if not already
2016         defined.
2017         (arm_regname): New struct type for ARM register names.
2018         (arm_toggle_regnames): Delete.
2019         (parse_disassembler_option): Use register name structure.
2020         (print_insn): New function: Combines duplicate code found in
2021         print_insn_big_arm and print_insn_little_arm.
2022         (print_insn_big_arm): Call print_insn.
2023         (print_insn_little_arm): Call print_insn.
2024         (print_arm_disassembler_options): Display list of supported,
2025         ARM specific disassembler options.
2026
2027 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
2028
2029         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2030         ARM_STT_16BIT flag as Thumb code symbols.
2031
2032         * arm-dis.c (printf_insn_little_arm): Ditto.
2033
2034 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
2035
2036         * arm-dis.c (printf_insn_thumb): Prevent double dumping
2037         of raw thumb instructions.
2038
2039 2000-01-20  Nick Clifton  <nickc@redhat.com>
2040
2041         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2042
2043 2000-01-03  Nick Clifton  <nickc@cygnus.com>
2044
2045         * arm-dis.c (streq): New macro.
2046         (strneq): New macro.
2047         (force_thumb): ew local variable.
2048         (parse_disassembler_option): New function: Parse a single, ARM
2049         specific disassembler command line switch.
2050         (parse_disassembler_option): Call parse_disassembler_option to
2051         parse individual command line switches.
2052         (print_insn_big_arm): Check force_thumb.
2053         (print_insn_little_arm): Check force_thumb.
2054
2055 For older changes see ChangeLog-9899
2056 \f
2057 Local Variables:
2058 mode: change-log
2059 left-margin: 8
2060 fill-column: 74
2061 version-control: never
2062 End: