1 2001-07-13 Philip Blundell <philb@gnu.org>
3 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
5 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
7 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
9 (@arch@_cgen_build_insn_regex): New routine from Graydon.
10 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
11 to verify if it is worth parsing the insn as insn "x". Also update
12 error message when insn is not a recognized format of the insn vs
13 when the insn is completely unrecognized.
15 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
17 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
19 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
20 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
22 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
24 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
25 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
26 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
28 2001-07-05 Ben Elliston <bje@redhat.com>
30 * Makefile.am (CPUDIR): Define.
31 (stamp-m32r): Update dependencies.
33 (stamp-openrisc): Ditto.
34 * Makefile.in: Regenerate.
36 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
38 * ppc-opc.c: Fix encoding of 'clf' instruction.
40 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
42 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
44 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
46 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
47 * cgen-opc.c (cgen_keyword_add): Ignore special first
48 character when building nonalpha_chars field.
50 2001-06-24 Ben Elliston <bje@redhat.com>
52 * m88k-dis.c: Format to conform to GNU coding standards.
54 2001-06-23 Andreas Jaeger <aj@suse.de>
56 * disassemble.c (disassembler_usage): Add unused attribute.
58 2001-06-22 Eric Christopher <echristo@redhat.com>
60 * mips-opc.c: Move prefx to start of the table.
62 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
64 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
67 2001-06-22 Pauli <pauli@moreton.com.au>
69 * m68k-opc.c: Add wdebug instruction.
71 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
73 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
75 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
77 * cgen-asm.c (cgen_parse_keyword): When looking for the
78 boundaries of a keyword, allow any special characters
79 that are actually in one of the allowed keyword.
80 * cgen-opc.c (cgen_keyword_add): Add any special characters
81 to the nonalpha_chars field.
83 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
85 * s390-opc.c: Add lgh instruction.
86 * s390-opc.txt: Likewise.
88 2001-06-11 Alan Modra <amodra@bigpond.net.au>
90 * i386-dis.c: Group function prototypes in one place.
91 (FLOATCODE): Redefine as 1.
92 (USE_GROUPS): Redefine as 2.
93 (USE_PREFIX_USER_TABLE): Redefine as 3.
94 (X86_64_SPECIAL): Define as 4.
95 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
96 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
97 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
98 (dis386): New table combining above four tables.
99 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
100 (dis386_twobyte): New table combining above two tables.
101 (x86_64_table): New table to handle x86_64.
103 (float_mem_att, float_mem_intel): Delet.
104 (float_mem): New table combining above two tables.
105 (print_insn_i386): Modify for above.
107 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
108 Return 0 on success, 1 if no valid alternative.
109 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
110 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
111 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
112 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
114 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
115 (OP_I64): If not 64-bit mode, call OP_I.
116 OP_OFF64): If not 64-bit mode, call OP_OFF.
117 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
118 'ignore'/'ignored' to 'bytemode'.
120 2001-06-10 Alan Modra <amodra@bigpond.net.au>
122 * configure.in: Sort 'ta' case statement.
123 * configure: Regenerate.
125 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
127 (disx86_64_att): Likewise.
128 (dis386_twobyte_att): Likewise.
129 (print_insn_i386): Don't print branch hints as a prefix.
130 (putop): 'H' macro prints branch hints.
131 (get64): Kill compile warnings.
133 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
135 * sh-opc.h (sh_table): Don't use empty initializers.
137 2001-06-06 Christian Groessler <cpg@aladdin.de>
139 * z8k-dis.c: Fix formatting.
140 (unpack_instr): Remove unused cases in switch statement. Add
141 safety abort() in default case.
142 (unparse_instr): Add safety abort() in default case.
144 2001-06-06 Peter Jakubek <pjak@snafu.de>
146 * m68k-dis.c (print_insn_m68k): Fix typo.
147 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
148 mcf (ColdFire) div, rem and moveb instructions.
150 2001-06-06 Alan Modra <amodra@bigpond.net.au>
152 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
153 (cond_jump_mode, loop_jcxz_mode): Define.
154 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
155 appropriate, and 'F' suffix to loop insns.
156 (disx86_64_att): Likewise.
157 (dis386_twobyte_att): Likewise.
158 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
159 Output data size prefix for long conditional jumps. Output cs and
161 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
162 (OP_J): Don't make PREFIX_DATA used.
164 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
166 * sh-opc.h (sh_table): Complete last element entry to avoid
169 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
171 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
173 2001-05-23 Alan Modra <amodra@one.net.au>
175 * arc-opc.c: Whitespace changes.
177 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
179 * cris-opc.c (cris_spec_regs): Add missing initializer field for
182 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
184 * cgen-dis.in (extract_normal): Complete support for min<base case.
186 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
188 * mips-dis.c (INSNLEN): Rename MAXLEN.
189 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
190 (print_insn_arg): Remove $ prefix of register names.
191 (set_mips_isa_type): Remove.
192 (mips_isa_type): New function.
193 (get_mips_isa): New Function.
194 (print_insn_mips): Rename _print_insn_mips.
195 (_print_insn_mips): New function, contains code which was
196 duplicated in print_insn_big_mips and print_insn_little_mips.
197 (print_insn_big_mips): Moved code to _print_insn_mips.
198 (print_insn_little_mips): Likewise.
199 (print_mips16_insn_arg): Remove $ prefix of register names.
200 Print error message before abort.
202 2001-05-14 J.T. Conklin <jtc@redback.com>
204 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
205 simplified mnemonics used for setting PPC750-specific special
208 2001-05-12 H.J. Lu <hjl@gnu.org>
210 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
213 2001-05-12 Peter Targett <peter.targett@arccores.com>
215 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
216 register to r/w. Formatting fixes throughout file.
218 2001-05-12 Alan Modra <amodra@one.net.au>
220 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
222 (twobyte_has_modrm): Update table.
223 (need_modrm): Give it file scope.
224 (MODRM_CHECK): Define.
225 (dofloat): Use MODRM_CHECK.
230 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
232 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
233 even at end of a section.
234 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
235 by ignoring precariously-unpacked insn_value in favor of raw buffer.
237 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
239 * disassemble.c (disassembler_usage): Remove unused attribute.
241 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
243 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
245 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
247 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
248 assume incoming buffer already has the base insn loaded. Handle
249 smaller-than-base instructions for variable-length case.
251 2001-05-04 Alan Modra <amodra@one.net.au>
253 * i386-dis.c (Ev, Ed): Remove duplicate define.
256 (OP_XS): New function.
257 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
259 (dis386_twobyte_intel): Likewise.
260 (prefix_user_table): Use MS for maskmovq operand.
262 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
264 * Makefile.am: Add OpenRISC target.
265 * Makefile.in: Regenerated.
267 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
269 * configure.in (bfd_openrisc_arch): Add target.
270 * configure: Regenerated.
272 * openrisc-asm.c: New file.
273 * openrisc-desc.c: Likewise.
274 * openrisc-desc.h: Likewise.
275 * openrisc-dis.c: Likewise.
276 * openrisc-ibld.c: Likewise.
277 * openrisc-opc.c: Likewise.
278 * openrisc-opc.h: Likewise.
280 2001-04-24 Christian Groessler <cpg@aladdin.de>
282 * z8k-dis.c: add names of control registers (ctrl_names);
283 (seg_length): provides instruction length fixup for segmented
284 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
285 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
286 (unparse_intr): handle CLASS_PR, print addresses without '#'
287 * z8k-opc.h: re-created with new z8kgen
288 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
289 entries for ldctl/ldctlb instruction
291 2001-04-06 Andreas Jaeger <aj@suse.de>
293 * i386-dis.c: Add ffreep instruction.
295 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
297 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
299 2001-03-24 Alan Modra <alan@linuxcare.com.au>
301 * i386-dis.c (PREGRP25): Define.
302 (dis386_twobyte_att): Use here in place of "movntq" entry.
303 (dis386_twobyte_intel): Likewise.
304 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
306 (dis386_twobyte_att): Use here.
307 (dis386_twobyte_intel): Likewise.
308 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
309 (prefix_user_table <maskmovdqu>): XM operand, not MX.
310 (prefix_user_table): Cosmetic changes to "bad" entries.
312 2001-03-23 Nick Clifton <nickc@redhat.com>
314 * mips-opc.c: Remove extraneous whitespace.
315 * mips-dis.c: Remove extraneous whitespace.
317 2001-03-22 Ben Elliston <bje@redhat.com>
319 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
320 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
321 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
322 to allay a compiler warning.
324 2001-03-22 Alan Modra <alan@linuxcare.com.au>
326 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
327 (dis386_twobyte_intel): Likewise.
328 (twobyte_has_modrm): Set entry for paddq, psubq.
330 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
332 * cgen-dis.in (print_insn_@arch@): Add support for target machine
333 determination via CGEN_COMPUTE_MACH.
334 * fr30-desc.c: Regenerate.
335 * fr30-dis.c: Regenerate.
336 * fr30-opc.h: Regenerate.
337 * m32r-desc.c: Regenerate.
338 * m32r-dis.c: Regenerate.
339 * m32r-opc.h: Regenerate.
340 * m32r-opinst.c: Regenerate.
342 2001-03-20 H.J. Lu <hjl@gnu.org>
344 * configure.in: Remove the redundent AC_ARG_PROGRAM.
345 * configure: Rebuild.
347 2001-03-19 Jim Wilson <wilson@redhat.com>
349 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
350 notestr if larger than xsect.
351 (in_class): Handle format M5.
352 * ia64-asmtab.c: Regnerate.
354 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
356 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
357 has more than one byte left to read.
359 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
361 * s390-opc.c: Add new opcodes. Smooth out formatting.
362 * s390-opc.txt: Add new opcodes.
364 2001-03-06 Nick Clifton <nickc@redhat.com>
366 * arm-dis.c (print_insn_thumb): Compute destination address
367 of BLX(1) instruction by taking bit 1 from PC and not from bit
370 2001-03-06 Igor Shevlyakov <igor@windriver.com>
372 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
373 so command line switches will work.
375 2001-03-05 Dave Brolley <brolley@redhat.com>
377 * fr30-asm.c: Regenerate.
378 * fr30-desc.c: Regenerate.
379 * fr30-desc.h: Regenerate.
380 * fr30-dis.c: Regenerate.
381 * fr30-ibld.c: Regenerate.
382 * fr30-opc.c: Regenerate.
383 * fr30-opc.h: Regenerate.
384 * m32r-asm.c: Regenerate.
385 * m32r-desc.c: Regenerate.
386 * m32r-desc.h: Regenerate.
387 * m32r-dis.c: Regenerate.
388 * m32r-ibld.c: Regenerate.
389 * m32r-opc.c: Regenerate.
390 * m32r-opc.h: Regenerate.
391 * m32r-opinst.c: Regenerate.
393 2001-02-28 Igor Shevlyakov <igor@windriver.com>
395 * m68k-opc.c: fix cpushl according to Motorola. Enable
396 bunch of instructions for Coldfire 5407 and add all new.
398 2001-02-27 Alan Modra <alan@linuxcare.com.au>
400 * configure.in (BFD_VERSION): Do without grep.
401 * configure: Regenerate.
402 * Makefile.am: Run "make dep-am".
403 * Makefile.in: Regenerate.
405 2001-02-23 David Mosberger <davidm@hpl.hp.com>
407 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
408 * ia64-asmtab.c: Regenerate.
410 2001-02-21 David Mosberger <davidm@hpl.hp.com>
412 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
413 separate variants: one for IMM22 and the other for IMM14.
414 * ia64-asmtab.c: Regenerate.
416 2001-02-21 Greg McGary <greg@mcgary.org>
418 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
420 2001-02-20 H.J. Lu <hjl@gnu.org>
422 * Makefile.am (ia64-ic.tbl): Remove the target.
423 (ia64-raw.tbl): Likewise.
424 (ia64-waw.tbl): Likewise.
425 (ia64-war.tbl): Likewise.
426 (ia64-asmtab.c): Generate it in the source directory.
427 * Makefile.in: Regenerated.
429 2001-02-18 lars brinkhoff <lars@nocrew.org>
431 * Makefile.am: Add PDP-11 target.
432 * configure.in: Likewise.
433 * disassemble.c: Likewise.
434 * pdp11-dis.c: New file.
435 * pdp11-opc.c: New file.
437 2001-02-14 Jim Wilson <wilson@redhat.com>
439 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
440 * ia64-asmtab.c: Regenerate.
442 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
444 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
448 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
450 * mips-dis.c (print_insn_arg): Use top four bits of the address of
451 the following instruction not of the jump itself for the jump
453 (print_mips16_insn_arg): Likewise.
455 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
457 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
459 * Makefile.in: Regenerate.
461 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
463 * Makefile.am: Add linux target for S/390.
464 * Makefile.in: Likewise.
465 * configure.in: Likewise.
466 * disassemble.c: Likewise.
467 * s390-dis.c: New file.
468 * s390-mkopc.c: New file.
469 * s390-opc.c: New file.
470 * s390-opc.txt: New file.
472 2001-02-05 Jim Wilson <wilson@redhat.com>
474 * ia64-asmtab.c: Revert 2000-12-16 change.
476 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
478 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
479 * m32r-desc.h: Regenerate.
481 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
483 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
484 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
486 2001-01-14 Alan Modra <alan@linuxcare.com.au>
488 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
490 2001-01-13 Nick Clifton <nickc@redhat.com>
492 * disassemble.c: Remove spurious white space.
494 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
496 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
499 2001-01-11 Peter Targett <peter.targett@arccores.com>
501 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
502 * Makefile.am (C_FILES): Add arc-ext.c.
503 (ALL_MACHINES) Add arc-ext.lo.
504 (INCLUDES) Add opcode directory to list.
505 New dependency entry for arc-ext.lo.
506 * disassemble.c (disassembler): Correct call to
507 arc_get_disassembler.
508 * arc-opc.c: New update for ARC, including full base
509 instructions for ARC variants.
510 * arc-dis.h, arc-dis.c: New update for ARC, including
511 extensibility functionality.
512 * arc-ext.h, arc-ext.c: New files for handling extensibility.
514 2001-01-10 Jan Hubicka <jh@suse.cz>
516 * i386-dis.c (PREGRP15 - PREGRP24): New.
517 (dis386_twobyt): Add SSE2 instructions.
518 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
519 (twobyte_uses_f3_prefix): ... this one.
520 (grps): Add SSE instructions.
521 (prefix_user_table): Add two new slots; add SSE2 instructions.
522 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
523 Handle the REPNZ and Data16 prefixes as well; do proper lookup
524 to prefix_user_table.
525 (OP_E): Accept mfence and lfence as well.
526 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
527 (OP_XMM): Support REX extensions.
531 2001-01-09 Nick Clifton <nickc@redhat.com>
533 * arm-dis.c (print_insn): Set pc to zero for instructions with
534 a reloc associated with them.
536 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
538 * cgen-asm.in (parse_insn_normal): Changed syn to be
539 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
540 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
541 to '\0' to use 0 instead.
542 * cgen-dis.in (print_insn_normal): Ditto.
543 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
545 2001-01-05 Jan Hubicka <jh@suse.cz>
547 * i386-dis.c: Add x86_64 support.
548 (rex): New static variable.
549 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
550 (USED_REX): New macro.
551 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
552 (OP_I64, OP_OFF64, OP_IMREG): New functions.
553 (OP_REG, OP_OFF): Declare.
554 (get64, get32, get32s): New functions.
555 (r??_reg): New constants.
556 (dis386_att): Change templates of instruction implicitly promoted
557 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
559 (dis386_intel): Likewise.
560 (dixx86_64_att): New table based on dis386_att.
561 (dixx86_64_intel): New table based on dis386_intel.
562 (names64, names8rex): New global variable.
563 (names32, names16): Add extended registers.
564 (prefix_user_t): Recognize rex prefixes.
565 (prefix_name): Print REX prefixes nicely.
566 (op_riprel): New global variable.
567 (start_pc): Set type to bfd_vma.
568 (print_insn_i386): Detect the 64bit mode and use proper table;
569 move ckprefix after initializing the buffer; output unused rex prefixes;
570 output information about target of RIP relative addresses.
571 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
572 (print_operand_value): New function.
573 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
574 REX prefix and new modes.
575 (get64, get32s): New.
576 (get32): Return bfd_signed_vma type.
577 (set_op): Initialize the op_riprel.
578 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
580 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
582 cgen-dis.in (read_insn): Use bfd_get_bits()
584 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
586 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
587 (hash_insn_list): Likewise
588 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
589 (extract_1): Use bfd_get_bits().
590 (extract_normal): Apply sign extension to both extraction
592 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
593 (cgen_put_insn_value): Use bfd_put_bits()
595 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
597 * cgen-asm.in (parse_insn_normal): Print better error message for
598 instructions with missing operands.
600 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
602 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
604 2000-12-16 Nick Clifton <nickc@redhat.com>
606 * Makefile.in: Regenerate.
607 * aclocal.m4: Regenerate.
608 * config.in: Regenerate.
609 * configure.in: Add spacing.
610 * configure: Regenerate.
611 * ia64-asmtab.c: Regenerate.
612 * po/opcodes.pot: Regenerate.
614 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
616 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
617 error messages over later parse-time ones.
619 2000-12-12 Jim Wilson <wilson@redhat.com>
621 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
623 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
624 (print_dependency_table): Print NULL if semantics field not set.
625 (insert_opcode_dependencies): Mark cmp parameter as unused.
626 (print_main_table): Use fprintf_vma to print long long fields.
627 (main): Mark argv paramter as unused. Convert to old style definition.
628 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
629 * ia64-asmtab.c: Regnerate.
631 2000-12-09 Nick Clifton <nickc@redhat.com>
633 * m32r-dis.c (print_insn): Prevent re-read of instruction from
636 * fr30-dis.c: Regenerate.
638 2000-12-08 Peter Targett <peter.targett@arccores.com>
640 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
641 * Makefile.am (C_FILES): Add arc-ext.c.
642 (ALL_MACHINES) Add arc-ext.lo.
643 (INCLUDES) Add opcode directory to list.
644 New dependency entry for arc-ext.lo.
645 * disassemble.c (disassembler): Correct call to
646 arc_get_disassembler.
647 * arc-opc.c: New update for ARC, including full base
648 instructions for ARC variants.
649 * arc-dis.h, arc-dis.c: New update for ARC, including
650 extensibility functionality.
651 * arc-ext.h, arc-ext.c: New files for handling extensibility.
653 2000-12-03 Chris Demetriou cgd@sibyte.com
655 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
656 MOD_HILO, and MOD_LO macros.
658 * mips-opc.c (M1, M2): Delete.
659 (mips_builtin_opcodes): Remove all uses of M1.
661 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
662 instructions take "G" format second operands and use the
664 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
666 Delete "sel" code operands from mfc1 and mtc1.
667 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
670 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
671 Chris Demetriou cgd@sibyte.com
673 * mips-opc.c (mips_builtin_opcodes): Finish additions
674 for MIPS32 support, and clean up existing entries for
675 aesthetics, consistency with the MIPS32 ISA, and
676 with consistency the rest of the table.
678 2000-12-01 Nick Clifton <nickc@redhat.com>
680 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
683 2000-12-01 Chris Demetriou <cgd@sibyte.com>
685 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
686 specifiers. Update 'B' for new constant names, and remove
688 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
689 near the top of the array, so they are disassembled properly.
690 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
691 code for MIPS32. Update "clo" and "clz" to use 'U' operand
692 specifier. Add 'H' format specifier variants for "mfc1,"
693 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
694 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
695 "wait" variant which uses 'J' operand specifier.
697 * mips-dis.c (set_mips_isa_type): Update to use
698 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
699 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
700 * mips-opc.c (I32): New constant for instructions added in
703 (mips_builtin_opcodes) Replace all uses of P4 with I32.
705 * mips-dis.c (set_mips_isa_type): Add cases for
706 bfd_mach_mips5 and bfd_mach_mips64.
707 * mips-opc.c (I64): New definitions.
709 * mips-dis.c (set_mips_isa_type): Add case for
712 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
714 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
715 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
716 Initialize variable dc to NULL.
717 (print_insn_shx): Remove unused label d_reg_n.
719 2000-11-24 Nick Clifton <nickc@redhat.com>
721 * arm-opc.h: Add new opcode formatting parameter 'B'.
722 (arm_opcodes): Add XScale, v5, and v5te instructions.
723 (thumb_opcodes): Add v5t instructions.
725 * arm-dis.c (print_insn_arm): Handle new 'B' format
727 (print_insn_thumb): Decode BLX(1) instruction.
729 2000-11-21 Chris Demetriou <cgd@sibyte.com>
731 * mips-opc.c: Fix file header comment.
733 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
735 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
736 print_insn_cris_with_register_prefix.
738 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
740 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
742 2000-11-07 Matthew Green <mrg@redhat.com>
744 * cgen-dis.in (print_insn): All insns which can fit into insn_value
745 must be loaded there in their entirety.
747 2000-10-20 Jakub Jelinek <jakub@redhat.com>
749 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
750 (compute_arch_mask): Add v8plusb and v9b machines.
751 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
752 * sparc-opc.c: Support for Cheetah instruction set.
753 (prefetch_table): Add #invalidate.
755 2000-10-16 Nick Clifton <nickc@redhat.com>
757 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
759 2000-10-06 Dave Brolley <brolley@redhat.com>
761 * fr30-desc.h: Regenerate.
762 * m32r-desc.h: Regenerate.
763 * m32r-ibld.c: Regenerate.
765 2000-10-05 Jim Wilson <wilson@redhat.com>
767 * ia64-ic.tbl: Update from Intel.
768 * ia64-asmtab.c: Regenerate.
770 2000-10-04 Kazu Hirata <kazu@hxi.com>
772 * ia64-gen.c: Convert C++-style comments to C-style comments.
773 * tic54x-dis.c: Likewise.
775 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
777 Changes to add dollar prefix to registers for files where user symbols
778 don't have a leading underscore. Fix formatting.
779 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
780 (format_reg): Add parameter with_reg_prefix. All callers changed.
781 (print_with_operands): Ditto.
782 (print_insn_cris_generic): Renamed from print_insn_cris, add
783 parameter with_reg_prefix.
784 (print_insn_cris_with_register_prefix,
785 print_insn_cris_without_register_prefix, cris_get_disassembler):
787 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
789 2000-09-22 Jim Wilson <wilson@redhat.com>
791 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
792 gt, ge, ngt, and nge.
793 * ia64-asmtab.c: Regenerate.
795 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
796 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
797 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
798 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
799 * ia64-asmtab.c: Regnerate.
801 2000-09-13 Anders Norlander <anorland@acc.umu.se>
803 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
804 Add mfc0 and mtc0 with sub-selection values.
805 Add clo and clz opcodes.
806 Add msub and msubu instructions for MIPS32.
807 Add madd/maddu aliases for mad/madu for MIPS32.
808 Support wait, deret, eret, movn, pref for MIPS32.
809 Support tlbp, tlbr, tlbwi, tlbwr.
812 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
813 (print_insn_arg): Handle 'H' args.
814 (set_mips_isa_type): Recognize 4K.
815 Use CPU_* defines instead of hardcoded numbers.
817 2000-09-11 Catherine Moore <clm@redhat.com>
819 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
820 (d30v_format_tab): Use Rb2 for modinc and moddec.
822 2000-09-07 Catherine Moore <clm@redhat.com>
824 * d30v-opc.c (d30v_format_tab): Use format Ra for
827 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
829 * configure: Rebuilt with new libtool.m4.
831 2000-09-05 Nick Clifton <nickc@redhat.com>
833 * configure: Regenerate.
834 * po/opcodes.pot: Regenerate.
836 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
838 * acinclude.m4: Include libtool and gettext macros from the
840 * aclocal.m4, configure: Rebuilt.
842 2000-08-30 Kazu Hirata <kazu@hxi.com>
844 * tic80-dis.c: Fix formatting.
846 2000-08-29 Kazu Hirata <kazu@hxi.com>
848 * w65-dis.c: Fix formatting.
850 2000-08-28 Mark Hatle <mhatle@mvista.com>
852 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
853 (powerpc_opcodes): Add table entries for PPC 405 instructions.
854 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
855 instructions. Added extended mnemonic mftbl as defined in the
856 405GP manual for all PPCs.
858 2000-08-28 Jim Wilson <wilson@redhat.com>
860 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
861 call. Change last goto to use failed instead of done.
863 2000-08-28 Dave Brolley <brolley@redhat.com>
865 * cgen-ibld.in (cgen_put_insn_int_value): New function.
866 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
867 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
868 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
869 * cgen-dis.in (read_insn): New static function.
870 (print_insn): Use read_insn to read the insn into the buffer and set
872 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
874 * fr30-asm.c: Regenerated.
875 * fr30-desc.c: Regenerated.
876 * fr30-desc.h: Regenerated.
877 * fr30-dis.c: Regenerated.
878 * fr30-ibld.c: Regenerated.
879 * fr30-opc.c: Regenerated.
880 * fr30-opc.h: Regenerated.
881 * m32r-asm.c: Regenerated.
882 * m32r-desc.c: Regenerated.
883 * m32r-desc.h: Regenerated.
884 * m32r-dis.c: Regenerated.
885 * m32r-ibld.c: Regenerated.
886 * m32r-opc.c: Regenerated.
888 2000-08-28 Kazu Hirata <kazu@hxi.com>
890 * tic30-dis.c: Fix formatting.
892 2000-08-27 Kazu Hirata <kazu@hxi.com>
894 * sh-dis.c: Fix formatting.
896 2000-08-24 David Edelsohn <dje@watson.ibm.com>
898 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
900 2000-08-24 Kazu Hirata <kazu@hxi.com>
902 * z8k-dis.c: Fix formatting.
904 2000-08-16 Jim Wilson <wilson@redhat.com>
906 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
907 break, mov-immediate, nop.
908 * ia64-opc-f.c: Delete fpsub instructions.
909 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
910 address operand. Rewrite using macros to avoid long lines.
911 * ia64-opc.h (POSTINC): Define.
912 * ia64-asmtab.c: Regenerate.
914 2000-08-15 Jim Wilson <wilson@redhat.com>
916 * ia64-ic.tbl: Add missing entries.
918 2000-08-08 Jason Eckhardt <jle@redhat.com>
920 * i860-dis.c (print_br_address): Change third argument from int
923 2000-08-07 Richard Henderson <rth@redhat.com>
925 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
926 for MLI templates. Handle IA64_OPND_TGT64.
928 2000-08-04 Ben Elliston <bje@redhat.com>
930 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
933 2000-08-02 Jim Wilson <wilson@redhat.com>
935 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
937 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
939 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
940 Change return type from void to int. Check the combination
941 of operands, return 1 if valid. Fix to avoid BUF overflow.
942 Report undefined combinations of operands in COMMENT.
943 Report internal errors to stderr. Output the adiw/sbiw
944 constant operand in both decimal and hex.
945 (print_insn_avr): Disassemble ldd/std with displacement of 0
946 as ld/st. Check avr_operand () return value, handle invalid
947 combinations of operands like unknown opcodes.
949 2000-07-28 Ben Elliston <bje@redhat.com>
951 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
952 (run-cgen, stamp-m32r, stamp-fr30): New targets.
953 * Makefile.in: Regenerate.
954 * configure.in: Add --enable-cgen-maint option.
955 * configure: Regenerate.
957 2000-07-26 Dave Brolley <brolley@redhat.com>
959 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
960 (cgen_hw_lookup_by_num): Ditto.
961 (cgen_operand_lookup_by_name): Ditto.
962 (print_address): Ditto.
963 (print_keyword): Ditto.
964 * cgen-dis.c (hash_insn_array): Mark unused parameters with
966 * cgen-asm.c (hash_insn_array): Mark unused parameters with
968 (cgen_parse_keyword): Ditto.
970 2000-07-22 Jason Eckhardt <jle@redhat.com>
972 * i860-dis.c: New file.
973 (print_insn_i860): New function.
974 (print_br_address): New function.
975 (sign_extend): New function.
976 (BITWISE_OP): New macro.
977 (I860_REG_PREFIX): New macro.
978 (grnames, frnames, crnames): New structures.
980 * disassemble.c (ARCH_i860): Define.
981 (disassembler): Add check for bfd_arch_i860 to set disassemble
982 function to print_insn_i860.
984 * Makefile.in (CFILES): Added i860-dis.c.
985 (ALL_MACHINES): Added i860-dis.lo.
986 (i860-dis.lo): New dependences.
988 * configure.in: New bits for bfd_i860_arch.
990 * configure: Regenerated.
992 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
994 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
995 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
996 (cris-dis.lo, cris-opc.lo): New rules.
997 * Makefile.in: Rebuild.
998 * configure.in (bfd_cris_arch): New target.
999 * configure: Rebuild.
1000 * disassemble.c (ARCH_cris): Define.
1001 (disassembler): Support ARCH_cris.
1002 * cris-dis.c, cris-opc.c: New files.
1003 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1005 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1007 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1008 Reported by Bill Clarke <llib@computer.org>.
1010 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1012 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1013 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1015 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1017 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1018 fput_const, extract_3, extract_5_load, extract_5_store,
1019 extract_5r_store, extract_5R_store, extract_10U_store,
1020 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1021 extract_12, extract_17, extract_22): Prototype.
1022 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1023 shadowing outer block.
1026 2000-07-05 DJ Delorie <dj@redhat.com>
1030 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1032 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1034 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1036 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1037 marked for translation (exception from the usual coding style).
1038 (print_insn_avr): Initialize insn2 to avoid warnings.
1040 2000-07-03 Kazu Hirata <kazu@hxi.com>
1042 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1043 * h8500-dis.c: Fix formatting.
1045 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1047 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1048 (CLEANFILES): Add DEPA.
1049 * Makefile.in: Regenerate.
1051 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1053 * arm-dis.c (regnames): Add an additional register set to match
1054 the set used by GCC. Make it the default.
1056 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1058 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1060 * Makefile.in: Regenerate.
1062 2000-06-20 H.J. Lu <hjl@gnu.org>
1064 * Makefile.am: Rebuild dependency.
1065 * Makefile.in: Rebuild.
1067 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1069 * Makefile.in, configure: regenerate
1070 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1072 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1074 * configure.in: Recognize m68hc12 and m68hc11.
1075 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1076 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1077 and opcode generation for m68hc11 and m68hc12.
1079 2000-06-16 Nick Duffek <nsd@redhat.com>
1081 * disassemble.c (disassembler): Refer to the PowerPC 620 using
1082 bfd_mach_ppc_620 instead of 620.
1084 2000-06-12 Kazu Hirata <kazu@hxi.com>
1086 * h8300-dis.c: Fix formatting.
1087 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1090 2000-06-09 Denis Chertykov <denisc@overta.ru>
1092 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1094 2000-06-07 Denis Chertykov <denisc@overta.ru>
1096 * avr-dis.c: completely rewritten.
1098 2000-06-02 Kazu Hirata <kazu@hxi.com>
1100 * h8300-dis.c: Follow the GNU coding style.
1101 (bfd_h8_disassemble) Fix a typo.
1103 2000-06-01 Kazu Hirata <kazu@hxi.com>
1105 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1106 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1107 correctly. Fix a typo.
1109 2000-05-31 Nick Clifton <nickc@redhat.com>
1111 * opintl.h (_(String)): Explain why dgettext is used instead of
1114 2000-05-30 Nick Clifton <nickc@redhat.com>
1116 * opintl.h (gettext, dgettext, dcgettext, textdomain,
1117 bindtextdomain): Replace defines with those from intl/libgettext.h
1118 to quieten gcc warnings.
1120 2000-05-26 Alan Modra <alan@linuxcare.com.au>
1122 * Makefile.am: Update dependencies with "make dep-am"
1123 * Makefile.in: Regenerate.
1125 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
1127 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1128 sign-extending operands.
1130 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
1132 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1135 2000-05-21 Nick Clifton <nickc@redhat.com>
1137 * Makefile.am (LIBIBERTY): Define.
1139 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1141 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1142 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1143 (reg_names): Rename to std_reg_names. Change it to a char **
1145 (std_reg_names): New name for reg_names.
1146 (set_mips_isa_type): Set reg_names to point to std_reg_names by
1149 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
1151 * fr30-desc.h: Partially regenerated to account for changed
1152 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1153 * m32r-desc.h: Ditto.
1155 2000-05-15 Nick Clifton <nickc@redhat.com>
1157 * arm-opc.h: Use upper case for flasg in MSR and MRS
1158 instructions. Allow any bit to be set in the field_mask of
1159 the MSR instruction.
1161 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1162 field_mask of an MSR instruction.
1164 2000-05-11 Thomas de Lellis <tdel@windriver.com>
1166 * arm-opc.h: Disassembly of thumb ldsb/ldsh
1167 instructions changed to ldrsb/ldrsh.
1169 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
1171 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1172 target addresses for 'jal' and 'j'.
1174 2000-05-10 Geoff Keating <geoffk@redhat.com>
1176 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1177 also available in common mode when powerpc syntax is being used.
1179 2000-05-08 Alan Modra <alan@linuxcare.com.au>
1181 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1182 (dummy_print_address): Ditto.
1184 2000-05-04 Timothy Wall <twall@redhat.com>
1186 * tic54x-opc.c: New.
1187 * tic54x-dis.c: New.
1188 * disassemble.c (disassembler): Add ARCH_tic54x.
1189 * configure.in: Added tic54x target.
1191 * Makefile.am: Add tic54x dependencies.
1192 * Makefile.in: Ditto.
1194 2000-05-03 J.T. Conklin <jtc@redback.com>
1196 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1197 vector unit operands.
1198 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1199 unit instruction formats.
1200 (PPCVEC): New macro, mask for vector instructions.
1201 (powerpc_operands): Add table entries for above operand types.
1202 (powerpc_opcodes): Add table entries for vector instructions.
1204 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1205 (print_insn_little_powerpc): Likewise.
1206 (print_insn_powerpc): Prepend 'v' when printing vector registers.
1208 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
1210 * configure.in: Add bfd_powerpc_64_arch.
1211 * disassemble.c (disassembler): Use print_insn_big_powerpc for
1214 2000-04-24 Nick Clifton <nickc@redhat.com>
1216 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1219 2000-04-23 Denis Chertykov <denisc@overta.ru>
1221 * avr-dis.c (reg_fmul_d): New. Extract destination register from
1223 (reg_fmul_r): New. Extract source register from FMUL instruction.
1224 (reg_muls_d): New. Extract destination register from MULS instruction.
1225 (reg_muls_r): New. Extract source register from MULS instruction.
1226 (reg_movw_d): New. Extract destination register from MOVW instruction.
1227 (reg_movw_r): New. Extract source register from MOVW instruction.
1228 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1229 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1231 2000-04-22 Timothy Wall <twall@redhat.com>
1233 * ia64-gen.c (general): Add an ordered table of primary
1234 opcode names, as well as priority fields to disassembly data
1235 structures to enforce a preferred disassembly format based on the
1236 ordering of the opcode tables.
1237 (load_insn_classes): Show a useful message if IC tables are missing.
1238 (load_depfile): Ditto.
1239 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1240 distinguish preferred disassembly.
1241 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1242 format. Fix incorrect flag on fma.s/fma.s.s0.
1243 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1244 the highest priority.
1245 * ia64-opc-b.c: Use more abbreviations.
1246 * ia64-asmtab.c: Regenerate.
1248 2000-04-21 Jason Eckhardt <jle@redhat.com>
1250 * hppa-dis.c (extract_16): New function.
1251 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1252 new operand types l,y,&,fe,fE,fx.
1254 2000-04-21 Richard Henderson <rth@redhat.com>
1255 David Mosberger <davidm@hpl.hp.com>
1256 Timothy Wall <twall@redhat.com>
1257 Bob Manson <manson@charmed.cygnus.com>
1258 Jim Wilson <wilson@redhat.com>
1260 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1261 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1262 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1264 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1265 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1266 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1267 * Makefile.in: Rebuild.
1268 * configure Rebuild.
1269 * configure.in (bfd_ia64_arch): New target.
1270 * disassemble.c (ARCH_ia64): Define.
1271 (disassembler): Support ARCH_ia64.
1272 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1273 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1274 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1275 ia64-war.tbl, ia64-waw.tbl: New files.
1277 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1279 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1280 (disassemble): Use them.
1282 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1284 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1285 * Makefile.am: Update dependencies.
1286 * Makefile.in: Regenerate.
1288 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1290 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1291 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1292 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1293 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1294 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1295 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1296 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1297 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1298 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1299 ansidecl.h as sysdep.h includes it.
1301 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1303 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1304 --enable-build-warnings option.
1305 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1306 * Makefile.in, configure: Re-generate.
1308 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1310 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1311 stc GBR,@-<REG_N> is available for arch_sh1_up.
1312 Group parallel processing insn with identical mnemonics together.
1313 Make three-operand psha / pshl come first.
1315 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1317 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1318 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1319 (sh_arg_type): Add A_PC.
1320 (sh_table): Update entries using immediates. Add repeat.
1321 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1322 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1324 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1326 * po/opcodes.pot: Regenerate.
1328 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1329 (DEP): Quote when passing vars to sub-make. Add warning message
1331 (DEP1): Rewrite for "gcc -MM".
1332 (CLEANFILES): Add DEP2.
1333 Update dependencies.
1334 * Makefile.in: Regenerate.
1336 2000-04-03 Denis Chertykov <denisc@overta.ru>
1338 * avr-dis.c: Syntax cleanup.
1339 (add0fff): Print the pc relative address as a signed number.
1340 (add03f8): Likewise.
1342 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1344 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1345 the parameter ATTRIBUTE_UNUSED.
1346 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1348 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1350 * m10300-opc.c: SP-based offsets are always unsigned.
1352 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1354 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1355 [branch always] instead of "undefined".
1357 2000-03-27 Nick Clifton <nickc@redhat.com>
1359 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1360 short instructions, from end of list of long instructions.
1362 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1364 * Makefile.am (CFILES): Add avr-dis.c.
1365 (ALL_MACHINES): Add avr-dis.lo.
1367 2000-03-27 Alan Modra <alan@linuxcare.com>
1369 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1371 (print_insn_avr): Call function via pointer in K&R compatible way.
1372 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1373 add0fff, add03f8): Convert to old style function declaration and
1375 (avrdis_opcode): Add prototype.
1377 2000-03-27 Denis Chertykov <denisc@overta.ru>
1379 * avr-dis.c: New file. AVR disassembler.
1380 * configure.in (bfd_avr_arch): New architecture support.
1381 * disassemble.c: Likewise.
1382 * configure: Regenerate.
1384 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1386 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1388 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1390 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1391 flag to determine if operand is pc-relative.
1393 (d30v_format_table):
1394 (REL6S3): Renamed from IMM6S3.
1395 Added flag OPERAND_PCREL.
1396 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1397 added flag OPERAND_PCREL.
1398 (IMM12S3U): Replaced with REL12S3.
1399 (SHORT_D2, LONG_D): Delay target is pc-relative.
1400 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1401 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1402 using the REL* operands.
1403 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1404 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1405 LONG_Db, using REL* operands.
1406 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1407 (d30v_opcode_table): Use new *r formats.
1409 2000-02-28 Nick Clifton <nickc@redhat.com>
1411 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1412 'signed_overflow_ok_p'.
1414 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1416 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1417 name of the libtool directory.
1418 * Makefile.in: Rebuild.
1420 2000-02-24 Nick Clifton <nickc@redhat.com>
1422 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1423 (cgen_clear_signed_overflow_ok): New function.
1424 (cgen_signed_overflow_ok_p): New function.
1426 2000-02-23 Andrew Haley <aph@redhat.com>
1428 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1429 m32r-ibld.c, m32r-opc.h: Rebuild.
1431 2000-02-23 Linas Vepstas <linas@linas.org>
1433 * i370-dis.c, i370-opc.c: New.
1435 * disassemble.c (ARCH_i370): Define.
1436 (disassembler): Handle it.
1438 * Makefile.am: Add support for Linux/IBM 370.
1439 * configure.in: Likewise.
1441 * Makefile.in: Regenerate.
1442 * configure: Likewise.
1444 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1446 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1447 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1450 2000-02-22 Andrew Haley <aph@redhat.com>
1452 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1454 * mips-opc.c (G6): New define.
1455 (mips_builtin_op): Add "move" definition for -gp32.
1457 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1459 From Grant Erickson <gerickso@Brocade.COM>:
1460 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1462 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
1464 * dis-buf.c (buffer_read_memory): Change `length' param and all int
1467 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1469 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1470 (print_insn_ppi): Likewise.
1471 (print_insn_shx): Use info->mach to select appropriate insn set.
1472 Add support for sh-dsp. Remove FD_REG_N support.
1473 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1474 (sh_arg_type): Likewise. Remove FD_REG_N.
1475 (sh_dsp_reg_nums): New enum.
1476 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1477 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1478 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1479 (arch_sh3_dsp_up): Likewise.
1480 (sh_opcode_info): New field: arch.
1481 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1482 D_REG_N. Fill in arch field. Add sh-dsp insns.
1484 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
1486 * arm-dis.c: Change flavor name from atpcs-special to
1487 special-atpcs to prevent name conflict in gdb.
1488 (get_arm_regname_num_options, set_arm_regname_option,
1489 get_arm_regnames): New functions. API to access the several
1490 flavor of register names. Note: Used by gdb.
1491 (print_insn_thumb): Use the register name entry from the currently
1492 selected flavor for LR and PC.
1494 2000-02-10 Nick Clifton <nickc@redhat.com>
1496 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1498 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1499 "mulsh.h" instructions.
1500 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1502 (print_insn_mcore): Add support for little endian targets.
1503 Add support for MULSH and OPSR classes.
1505 2000-02-07 Nick Clifton <nickc@redhat.com>
1507 * arm-dis.c (parse_arm_diassembler_option): Rename again.
1508 Previous delat did not take.
1510 2000-02-03 Timothy Wall <twall@redhat.com>
1512 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
1513 to adjust target address bounds checking and calculate the
1514 appropriate octet offset into data.
1516 2000-01-27 Nick Clifton <nickc@redhat.com>
1518 * arm-dis.c: (parse_disassembler_option): Rename to
1519 parse_arm_disassembler_option and allow to be exported.
1521 * disassemble.c (disassembler_usage): New function: Print out any
1522 target specific disassembler options.
1523 Call arm_disassembler_options() if the ARM architecture is being
1526 * arm-dis.c (NUM_ELEM): Define this macro if not already
1528 (arm_regname): New struct type for ARM register names.
1529 (arm_toggle_regnames): Delete.
1530 (parse_disassembler_option): Use register name structure.
1531 (print_insn): New function: Combines duplicate code found in
1532 print_insn_big_arm and print_insn_little_arm.
1533 (print_insn_big_arm): Call print_insn.
1534 (print_insn_little_arm): Call print_insn.
1535 (print_arm_disassembler_options): Display list of supported,
1536 ARM specific disassembler options.
1538 2000-01-27 Thomas de Lellis <tdel@windriver.com>
1540 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1541 ARM_STT_16BIT flag as Thumb code symbols.
1543 * arm-dis.c (printf_insn_little_arm): Ditto.
1545 2000-01-25 Thomas de Lellis <tdel@windriver.com>
1547 * arm-dis.c (printf_insn_thumb): Prevent double dumping
1548 of raw thumb instructions.
1550 2000-01-20 Nick Clifton <nickc@redhat.com>
1552 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1554 2000-01-03 Nick Clifton <nickc@cygnus.com>
1556 * arm-dis.c (streq): New macro.
1557 (strneq): New macro.
1558 (force_thumb): ew local variable.
1559 (parse_disassembler_option): New function: Parse a single, ARM
1560 specific disassembler command line switch.
1561 (parse_disassembler_option): Call parse_disassembler_option to
1562 parse individual command line switches.
1563 (print_insn_big_arm): Check force_thumb.
1564 (print_insn_little_arm): Check force_thumb.
1566 For older changes see ChangeLog-9899
1572 version-control: never