2 Tue Jan 6 13:08:14 1998 Doug Evans <devans@seba.cygnus.com>
4 * txvu-dis.c (print_insn_txvu): Handle no separator between
5 upper and lower insn #ifndef VERTICAL_BAR_SEPARATOR.
7 Mon Jan 5 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
9 * txvu-dis.c, txvu-opc.c: New files.
10 * configure.in: Compile them.
11 * configure: Regenerate.
12 * Makefile.am (ALL_MACHINES): Add txvu-{dis,opc}.lo.
13 (txvu-dis.lo,txvu-opc.lo): Add rules for.
14 * Makefile.in: Regenerate.
16 Mon Dec 22 17:17:03 1997 Doug Evans <devans@canuck.cygnus.com>
18 * configure.in: Add txvu support.
19 * configure: Regenerate.
20 * disassemble.c: Add txvu support.
23 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
25 * mips-opc.c: Add FP_D to s.d instruction flags.
27 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
29 * m68k-opc.c (halt, pulse): Enable them on the 68060.
32 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
34 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
35 PC relative offset forms before the 15 bit forms. An assembler command
36 line option now chooses the default.
40 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
42 * mips-opc.c: Add many missing r5900 instructions.
46 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
48 * d30v-opc.c (d30v_opcode_table): Set new flags bits
49 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
52 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
54 * configure: Only build libopcodes shared if --enable-shared's value
55 was `yes', or was set to `*opcodes*'.
56 * aclocal.m4: Likewise.
57 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
58 original source of this bit of code. It's not clear what the best fix
62 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
64 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
67 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
69 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
70 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
71 offset forms before the 15 bit forms, to default to the long forms.
74 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
76 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
78 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
80 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
81 symbol if none is present.
82 (print_insn_big_arm): Prevent examination of stored symbol if
85 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
87 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
89 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
91 * disassemble.c: Remove disasm_symaddr() function.
93 * arm-dis.c: Use info->symbol instead of info->flags to determine
94 if disassmbly should be in Thumb or Arm mode.
96 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
98 * arm-dis.c: Add support for disassembling Thumb opcodes.
99 (print_insn_thumb): New function.
101 * disassemble.c (disasm_symaddr): New function.
103 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
104 (thumb_opcodes): Table of Thumb opcodes.
106 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
108 * m68k-opc.c (btst): Change Dd@s to Dd;b.
110 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
111 and 'v' as operand types.
113 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
115 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
116 <olivier.carmona@di.epfl.ch>.
117 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
118 which has a two word opcode with a one word argument.
121 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
123 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
124 unsigned, not signed.
125 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
129 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
131 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
132 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
133 (ftrv): Slay the cut-and-paste monster.
136 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
138 * d10v-dis.c (print_operand):
139 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
141 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
143 * d10v-opc.c (OPERAND_FLAG): Split into:
144 (OPERAND_FFLAG, OPERAND_CFLAG) .
148 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
150 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
151 field for all INSN_MACRO's.
154 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
156 * mips-opc.c (sync,cache): These are 3900 insns.
158 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
160 sh-opc.h (sh_table): Remove ftst/nan.
162 start-sanitize-vr5400
163 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
165 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
166 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
168 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
172 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
174 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
175 Add tx49 insns and configury.
178 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
180 * mips-opc.c (ffc, ffs): Fix mask.
183 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
185 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
189 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
191 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
192 start-sanitize-vr5400
193 Added VR5400 instructions.
194 (N5): New cpu-id macro.
196 (WR_HILO, RD_HILO, MOD_HILO): New macros.
198 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
200 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
201 (WR_HILO, RD_HILO, MOD_HILO): New macros.
203 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
205 * v850-dis.c (disassemble): Replace // with /* ... */
207 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
209 * sparc-opc.c: Add wr & rd for v9a asr's.
210 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
211 (v9a_asr_reg_names): New variable.
212 Patch from David Miller <davem@vger.rutgers.edu>.
214 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
216 * sparc-opc.c (v9notv9a): New insn type.
217 (IMPDEP): Move to the end to not conflict with edge8 et al.
218 Patch from David Miller <davem@vger.rutgers.edu>.
220 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
222 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
224 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
226 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
228 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
230 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
231 of disassemble_info structure to determine if an overlay address
232 has a matching symbol in low memory.
234 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
235 new symbol_at_address_func field in disassemble_info structure.
237 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
239 * v850-opc.c (extract_d22): Use signed arithmatic.
241 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
243 * mips-opc.c: Three op mult is not an ISA insn.
245 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
247 * mips-opc.c: Fix formatting.
249 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
251 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
252 than assuming that char is signed. Explicitly sign extend 16 bit
253 values, rather than assuming that short is 16 bits.
254 (OP_sI, OP_J, OP_DIR): Likewise.
257 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
259 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
263 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
265 * v850-opc.c: Fix typo in comment.
267 * v850-dis.c (disassemble): Add test of processor type when
270 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
272 * configure.in: Use a diversion to set enable_shared before the
273 arguments are parsed.
274 * configure: Rebuild.
276 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
278 * m68k-opc.c (TBL1): Use ! rather than `.
279 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
281 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
283 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
285 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
287 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
290 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
291 * aclocal.m4: Rebuild with new libtool.
292 * configure: Rebuild.
295 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
297 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
300 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
302 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
304 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
306 * v850-opc.c (v850_opcodes): Further rearrangements.
309 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
311 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
314 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
316 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
319 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
321 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
323 * mips16-opc.c: Added mips16 sdbbp.
326 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
328 * v850-opc.c: Initialise processors field of v850_opcode structure.
331 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
333 Merge changes from Martin Hunt:
335 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
337 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
338 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
339 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
341 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
343 * d30v-dis.c (print_insn): First operand of d*i (delayed
344 branch) instructions is relative.
346 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
347 (d30v_operand_table): Add IMM6S3 type.
348 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
350 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
351 and cmp instructions.
353 * d30v-opc.c: Correct entries for repeat*, and sat*.
354 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
355 types. Correct several formats.
357 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
359 * d30v-opc.c (pre_defined_registers): Change control registers.
361 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
362 SHORT_C2. Manual was incorrect.
364 * d30v-dis.c (lookup_opcode): Return value now indicates
365 if an opcode has a short and a long form. Used for deciding
366 to append a ".s" or ".l".
367 (print_insn): Append a ".s" to an instruction if it is
368 the short form and ".l" if it is a long form. Do not append
369 anything if the instruction has only one possible size.
371 * d30v-opc.c: Change mulx2h to require an even register.
372 New form: SHORT_A2; a SHORT_A form that needs an even
373 register as the first operand.
375 * d30v-dis.c (print_insn_d30v): Fix problem where the last
376 instruction was not being disassembled if there were an odd
377 number of instructions.
379 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
383 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
385 * v850-dis.c (disassemble): Improved display of register lists.
388 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
390 * sparc-opc.c (sparc_opcodes): Fix assembler args to
391 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
392 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
393 fandnot1s, fandnot2s.
395 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
397 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
399 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
401 * cgen-asm.c (cgen_parse_address): New argument resultp.
403 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
405 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
407 * mn10200-dis.c (disassemble): PC relative instructions are
408 relative to the next instruction, not the current instruction.
410 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
412 * v850-dis.c (disassemble): Only signed extend values that are not
413 returned by extract functions.
414 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
416 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
418 * v850-opc.c: Update comments. Remove use of
419 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
421 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
423 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
425 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
427 * configure: Rebuilt with latest devo autoconf for NT support.
429 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
431 * v850-dis.c (disassemble): Use curly brace syntax for register
434 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
435 where r0 is being used as a destination register.
438 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
440 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
444 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
446 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
447 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
448 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
449 Add insns to access SGR and DBR.
450 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
453 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
455 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
458 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
460 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
461 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
464 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
466 * configure (cgen_files): Add support for v850e target.
467 * configure.in (cgen_files): Add support for v850e target.
469 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
471 * configure (cgen_files): Add support for v850ea target.
472 * configure.in (cgen_files): Add support for v850ea target.
475 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
477 * configure.in (bfd_arc_arch): Add.
478 * configure: Rebuild.
479 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
480 * Makefile.in: Rebuild.
481 * arc-dis.c, arc-opc.c: New files.
482 * disassemble.c (ARCH_all): Define ARCH_arc.
483 (disassembler): Add ARC support.
485 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
488 * v850-dis.c (disassemble): Add support for v850EA instructions.
490 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
491 (v850_opcodes): Add v850EA instructions.
493 * v850-dis.c (disassemble): Add support for v850E instructions.
495 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
496 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
497 insert_spe, extract_spe): New Functions.
498 (v850_opcodes): Add v850E instructions.
501 * v850-opc.c: Reorganised and re-layed out to improve readability
504 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
506 * configure: Rebuild with autoconf 2.12.1.
508 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
510 * aclocal.m4, configure: Rebuild with new automake patches.
512 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
514 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
515 * acinclude.m4: Just include acinclude.m4 from BFD.
516 * aclocal.m4, configure: Rebuild.
518 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
520 * Makefile.am: New file, based on old Makefile.in.
521 * acconfig.h: New file.
522 * acinclude.m4: New file.
523 * stamp-h.in: New file.
524 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
525 Removed shared library handling; now handled by libtool. Replace
526 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
527 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
528 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
529 handling in AC_OUTPUT.
530 * dep-in.sed: Change .o to .lo.
531 * Makefile.in: Now built with automake.
532 * aclocal.m4: Now built with aclocal.
533 * config.in, configure: Rebuild.
535 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
537 * mips-opc.c: Fix typo/thinko in "eret" instruction.
540 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
542 * mips-opc.c: Fix coding of mtsa.
545 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
547 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
549 * sparc-dis.c (sorted_opcodes): New static local.
550 (struct opcode_hash): `opcode' is pointer to const element.
551 (build_hash): First arg is now table of sorted pointers.
552 (print_insn_sparc): Sort opcodes by sorting table of pointers.
553 (compare_opcodes): Update.
555 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
557 * cgen-opc.c: #include <ctype.h>.
558 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
559 Handle case insensitive hashing.
560 (hash_keyword_value): Change type of `value' to unsigned int.
562 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
564 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
565 precision FP, mark it as such. Likewise for double precision
566 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
569 (mips_builtin_opcodes): Remove non-existant r5900 instructions
573 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
575 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
576 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
579 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
581 * ppc-opc.c (extract_nsi): make unsigned expression signed before
583 (UNUSED): remove one level of parens, so MSVC doesn't choke on
584 nesting depth when all the macros are expanded.
586 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
588 * sparc-opc.c: The fcmp v9a instructions take an integer register
589 as a destination, not a floating point register. From Christian
590 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
592 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
594 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
595 syntax. From Roman Hodek
596 <rnhodek@faui22c.informatik.uni-erlangen.de>.
598 * i386-dis.c (twobyte_has_modrm): Fix pand.
600 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
602 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
604 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
606 * arm-dis.c: Add prototypes for arm_decode_shift and
609 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
611 * mips-opc.c: Add r3900 insns.
613 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
615 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
616 print delay slot instructions on the same line. When using a PC
617 relative load, add a comment with the value being loaded if it can
620 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
622 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
623 to pushS/popS for segment regs and byte constant so that
624 pushw/popw printed when in 16 bit data mode.
626 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
627 print cbtw, cwtd in 16 bit data mode.
628 * i386-dis.c (putop): extra case W to support above.
630 * i386-dis.c (print_insn_x86): print addr32 prefix when given
631 address size prefix in 16 bit address mode.
633 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
635 * sh-dis.c: Reindent. Rename local variable fprintf to
638 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
640 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
642 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
644 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
646 * mips16-opc.c (mip16_opcodes): same.
648 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
650 * m68k-opc.c (moveb): Change $d to %d.
652 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
654 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
655 (twobyte_has_modrm): Likewise.
657 (OP_MMX, OP_EM, OP_MS): New static functions.
659 * i386-dis.c: Revert patch of April 4. The output now matches
662 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
664 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
667 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
669 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
671 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
673 * Makefile.in (install): Depend upon installdirs.
674 (installdirs): New target.
676 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
678 From Thomas Graichen <graichen@rzpd.de>:
679 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
680 * configure: Rebuild.
682 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
684 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
685 Delete string{,s}.h support.
687 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
689 * cgen-asm.c (cgen_parse_operand_fn): New global.
690 (cgen_parse_{{,un}signed_integer,address}): Update call to
691 cgen_parse_operand_fn.
692 (cgen_init_parse_operand): New function.
693 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
694 from cgen_asm_init_parse.
695 (m32r_cgen_assemble_insn): New operand `errmsg'.
696 Delete call to as_bad, return error message to caller.
697 (m32r_cgen_asm_hash_keywords): #if 0 out.
699 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
701 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
703 [case 'J']: Fix typo in register name.
705 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
707 * configure.in: Substitute SHLIB_LIBS.
708 * configure: Rebuild.
709 * Makefile.in (SHLIB_LIBS): New variable.
710 ($(SHLIB)): Use $(SHLIB_LIBS).
712 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
714 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
716 * cgen-opc.c (hash_keyword_name): Improve algorithm.
718 * disassemble.c (disassembler): Handle m32r.
720 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
722 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
723 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
724 * Makefile.in (CFILES): Add them.
725 (ALL_MACHINES): Add them.
726 (dependencies): Regenerate.
727 * configure.in (cgen_files): New variable.
728 (bfd_m32r_arch): Add entry.
729 * configure: Regenerate.
731 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
733 * configure.in: Correct file names for bfd_mn10[23]00_arch.
734 * configure: Rebuild.
736 * Makefile.in: Rebuild dependencies.
738 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
740 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
743 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
745 * Branched binutils 2.8.
747 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
749 * m10200-dis.c: Rename from mn10200-dis.c.
750 * m10200-opc.c: Rename from mn10200-opc.c.
751 * m10300-dis.c: Rename from mn10300-dis.c
752 * m10300-opc.c: Rename from mn10300-opc.c.
753 * Makefile.in: Update accordingly.
755 * mips16-opc.c: Add mul and dmul macros.
757 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
759 * makefile.vms: Update CFLAGS, add clean target.
761 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
763 * mips-opc.c: Add "wait". From Ralf Baechle
764 <ralf@gnu.ai.mit.edu>.
766 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
767 * configure, config.in: Rebuild.
768 * sysdep.h: Include <stdlib.h> if it exists.
769 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
771 * Makefile.in: Rebuild dependencies.
773 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
775 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
776 Andrew Bray <andy@madhouse.demon.co.uk>.
778 * mips-opc.c: Add cast when setting mips_opcodes.
780 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
782 * v850-dis.c (disassemble): Fix sign extension problem.
783 * v850-opc.c (extract_d*): Fix sign extension problems to make
784 disassembly calculate branch offsets correctly.
786 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
788 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
790 * mips-opc.c: Add dctr and dctw.
793 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
795 * d30v-dis.c (print_insn): Change the way signed constants
798 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
800 * Makefile.in (BFD_H): New variable.
801 (HFILES): New variable.
802 (CFILES): Add all C files.
803 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
804 Delete old dependencies, and build new ones.
805 * dep-in.sed: New file.
807 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
809 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
811 start-sanitize-coldfire
812 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
814 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
817 end-sanitize-coldfire
818 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
820 * mn10200-opc.c: Change "trap" to "syscall".
821 * mn10300-opc.c: Add new "syscall" instruction.
823 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
825 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
826 mulul insns on the coldfire.
828 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
830 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
831 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
832 (print_insn_little_arm): Likewise.
834 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
836 Based on patches from H.J. Lu <hjl@lucon.org>:
837 * i386-dis.c (fetch_data): Add prototype.
838 * m68k-dis.c (fetch_data): Add prototype.
839 (dummy_print_address): Add prototype. Make static.
840 * ppc-opc.c (valid_bo): Add prototype.
841 * sparc-dis.c (build_hash_table): Add prototype.
842 (is_delayed_branch, compute_arch_mask): Add prototypes.
843 (print_insn_sparc): Make several local variables const.
844 (compare_opcodes): Change arguments to const PTR. Add prototype.
845 * sparc-opc.c (arg): Change name field to be const.
846 (lookup_name, lookup_value): Add prototypes. Change table and
847 name parameters to be const.
848 (sparc_encode_asi): Change name parameter to be const.
849 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
850 (sparc_encode_sparclet_cpreg): Likewise.
851 (sparc_decode_asi): Change return type to be const.
852 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
853 (sparc_decode_sparclet_cpreg): Likewise.
855 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
857 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
858 Solaris doesn't like the combined options, and the -f is
860 (stamp-tshlink, install): Likewise.
862 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
864 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
867 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
869 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
871 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
873 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
876 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
878 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
881 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
883 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
885 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
887 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
890 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
892 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
893 floatformat_to_double to make portable.
894 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
897 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
899 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
900 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
902 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
904 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
905 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
908 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
910 * tic80-opc.c (LSI_SCALED): Renamed from this ...
911 (OFF_SL_BR_SCALED): ... to this, and added the flag
912 TIC80_OPERAND_BASEREL to the flags word.
913 (tic80_opcodes): Replace all occurances of LSI_SCALED with
917 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
919 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
920 Change mips_opcodes from const array to a pointer,
921 and change bfd_mips_num_opcodes from const int to int,
922 so that we can increase the size of the mips opcodes table
926 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
928 * tic80-opc.c (tic80_predefined_symbols): Revert change to
929 store BITNUM values in the table in one's complement form
930 to match behavior when assembler is given a raw numeric
931 value for a BITNUM operand.
932 * tic80-dis.c (print_operand_bitnum): Ditto.
936 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
938 * d30v-opc.c: Removed references to FLAG_X.
941 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
943 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
946 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
948 * Makefile.in: Added d30v object files.
949 * configure: (bfd_d30v_arch) Rebuilt.
950 * configure.in: (bfd_d30v_arch) Added new case.
951 * d30v-dis.c: New file.
952 * d30v-opc.c: New file.
953 * disassemble.c (disassembler) Add entry for d30v.
957 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
959 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
960 representations for the floating point BITNUM values.
962 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
964 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
965 in the table in one's complement form, as they appear in the
967 (tic80_symbol_to_value): Use macros to access predefined
969 (tic80_value_to_symbol): Ditto.
970 (tic80_next_predefined_symbol): New function.
971 * tic80-dis.c (print_operand_bitnum): Remove code that did
972 one's complement for BITNUM values.
976 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
978 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
981 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
983 * makefile.vms: Remove 8 bit characters. Update to latest
986 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
988 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
990 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
992 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
993 (IMM24_PCREL): Likewise.
995 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
997 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
998 address for an extended PC relative instruction that is not a
1001 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1003 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1006 start-sanitize-tic80
1007 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1009 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1010 (tic80_opcodes): Sort entries so that long immediate forms
1011 come after short immediate forms, making it easier for
1012 assembler to select the right one for a given operand.
1015 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1017 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1019 (print_insn_mips16): Likewise.
1021 start-sanitize-r5900
1022 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1024 * mips-opc.c: add r5900.
1027 start-sanitize-tic80
1028 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1030 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1031 a symbol class that restricts translation to just that
1032 class (general register, condition code, etc).
1034 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1036 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1037 and REG_DEST_E for register operands that have to be
1038 an even numbered register. Add REG_FPA for operands that
1039 are one of the floating point accumulator registers.
1040 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1041 (tic80_opcodes): Change entries that need even numbered
1042 register operands to use the new operand table entries.
1043 Add "or" entries that are identical to "or.tt" entries.
1046 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1048 * mips16-opc.c: Add new cases of exit instruction for
1050 * mips-dis.c (print_mips16_insn_arg): Display floating point
1051 registers in operands of exit instruction. Print `$' before
1052 register names in operands of entry and exit instructions.
1054 start-sanitize-tic80
1055 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1057 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1058 pairs for all predefined symbols recognized by the assembler.
1059 Also used by the disassembling routines.
1060 (tic80_symbol_to_value): New function.
1061 (tic80_value_to_symbol): New function.
1062 * tic80-dis.c (print_operand_control_register,
1063 print_operand_condition_code, print_operand_bitnum):
1064 Remove private tables and use tic80_value_to_symbol function.
1067 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1069 * d10v-dis.c (print_operand): Change address printing
1070 to correctly handle PC wrapping. Fixes PR11490.
1072 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1074 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1077 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1079 * mips-dis.c (print_insn_mips16): Set insn_info information.
1080 (print_mips16_insn_arg): Likewise.
1082 * mips-dis.c (print_insn_mips16): Better handling of an extend
1083 opcode followed by an instruction which can not be extended.
1085 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1087 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1088 coldfire moveb instruction to not allow an address register as
1089 destination. Although the documentation does not indicate that
1090 this is invalid, experiments uncovered unexpected behavior.
1091 Added a comment explaining the situation. Thanks to Andreas
1092 Schwab for pointing this out to me.
1094 start-sanitize-tic80
1095 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1097 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1098 entries are presorted so that entries with the same mnemonic are
1099 adjacent to each other in the table. Sort the entries for each
1100 instruction so that this is true.
1103 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1105 * m68k-dis.c: Include <libiberty.h>.
1106 (print_insn_m68k): Sort the opcode table on the most significant
1107 nibble of the opcode.
1109 start-sanitize-tic80
1110 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1112 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1113 "vsub", "vst", "xnor", and "xor" instructions.
1114 (V_a1): Renamed from V_a, msb of accumulator reg number.
1115 (V_a0): Add macro, lsb of accumulator reg number.
1117 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1119 * tic80-dis.c (print_insn_tic80): Broke excessively long
1120 function up into several smaller ones and arranged for
1121 the instruction printing function to be callable recursively
1122 to print vector instructions that have both a load and a
1123 math instruction packed into a single opcode.
1124 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1125 to explain why it comes after the other vector opcodes.
1128 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1130 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1131 move insns to handle immediate operands.
1133 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1135 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1136 fix operand mask in the "moveml" entries for the coldfire.
1138 start-sanitize-tic80
1139 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1141 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1142 New macros for building vector instruction opcodes.
1143 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1144 FMT_LI, which were unused. The field is now a flags field.
1145 Remove some opcodes that are possible, but illegal, such
1146 as long immediate instructions with doubles for immediate
1147 values. Add "vadd" and "vld" instructions.
1149 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1151 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1152 the order more logical. Move the shift alias instructions ("rotl",
1153 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1154 interspersed with the regular sr.x and sl.x instructions. Add
1155 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1156 "sub", "subu", "swcr", and "trap".
1158 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1160 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1161 (OFF_SL_PC): Renamed from OFF_SL.
1162 (OFF_SS_BR): New operand type for base relative operand.
1163 (OFF_SL_BR): New operand type for base relative operand.
1164 (REG_BASE): New operand type for base register operand.
1165 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1166 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1167 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1169 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1170 10 char field, padded with spaces on rhs, rather than a string
1171 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1172 than old TIC80_OPERAND_RELATIVE. Add support for new
1173 TIC80_OPERAND_BASEREL flag bit.
1175 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1177 * tic80-dis.c (print_insn_tic80): Print floating point operands
1179 * tic80-opc.c (SPFI): Add single precision floating point
1180 immediate operand type.
1181 (ROTATE): Add rotate operand type for shifts.
1182 (ENDMASK): Add for shifts.
1183 (n): Macro for the 'n' bit.
1184 (i): Macro for the 'i' bit.
1185 (PD): Macro for the 'PD' field.
1186 (P2): Macro for the 'P2' field.
1187 (P1): Macro for the 'P1' field.
1188 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1192 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1194 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1195 adding in current address for pc-relative operands.
1197 start-sanitize-tic80
1198 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1200 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1201 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1202 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1203 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1204 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1205 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1206 (REG_SCALED, LSI_SCALED): New operand types.
1207 (E): New macro for 'E' bit at bit 27.
1208 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1209 opcodes, including the various size flavors (b,h,w,d) for
1210 the direct load and store instructions.
1212 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1214 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1216 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1217 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1218 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1219 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1220 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1221 masks with "MASK_* & ~M_*" to get the M bit reset.
1222 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1224 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1226 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1227 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1228 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1230 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1231 CC, SICR, and LICR table entries.
1232 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1233 "bcnd", and "brcr" opcodes.
1236 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1238 * ppc-opc.c (powerpc_operands): Make comment match the
1239 actual fields (no shift field).
1240 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1241 start-sanitize-tic80
1242 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1243 partial implementation, work in progress.
1244 * tic80-opc.c (tic80_operands): Begin construction operands table.
1245 (tic80_opcodes): Continue populating opcodes table and start
1246 filling in the operand indices.
1247 (tic80_num_opcodes): Add this.
1250 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1252 * m68k-opc.c: Add #B case for moveq.
1254 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1256 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1257 before they are used.
1259 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1261 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1262 for "breakpoint" instruction.
1264 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1266 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1267 (dep): Use ALL_CFLAGS rather than CFLAGS.
1269 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1271 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1274 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1276 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1277 start-sanitize-tic80
1278 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1281 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1283 * mips16-opc.c: Add "abs".
1285 start-sanitize-tic80
1286 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1288 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1289 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1290 (disassembler): Add bfd_arch_tic80 support to set disassemble
1291 to print_insn_tic80.
1292 * tic80-dis.c (print_insn_tic80): Add stub.
1294 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1296 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1297 * configure: Regenerate with autoconf.
1298 * tic80-dis.c: Add file.
1299 * tic80-opc.c: Add file.
1302 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1304 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1306 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1308 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1309 (mn10200_opcodes): Use it for some logicals and btst insns.
1310 Add "break" and "trap" instructions.
1312 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1314 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1316 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1318 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1319 relative load or add now depends upon whether the instruction is
1322 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1324 * mn10200-dis.c: Finish writing disassembler.
1325 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1326 Fix mask for "jmp (an)".
1328 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1329 handle endianness issues for mn10300.
1331 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1333 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1335 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1336 instruction. Fix opcode field for "movb (imm24),dn".
1338 * mn10200-opc.c (mn10200_operands): Fix insertion position
1341 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1343 * mn10200-opc.c: Create mn10200 opcode table.
1344 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1345 but moving along nicely.
1347 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1349 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1351 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1353 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1354 specifiers for fmovem* instructions.
1356 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1358 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1360 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1362 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1365 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1367 * mn10300-opc.c: Add some comments explaining the various
1370 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1372 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1374 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1377 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1378 operand specifiers in fmovm* instructions.
1380 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1382 * ppc-opc.c (insert_li): Give an error if the offset has the two
1383 least significant bits set.
1385 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1387 * mips-dis.c (print_insn_mips16): Separate the instruction from
1388 the arguments with a tab, not a space.
1390 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1392 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1395 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1398 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1400 * configure: Rebuild with autoconf 2.12.
1402 Add support for mips16 (16 bit MIPS implementation):
1403 * mips16-opc.c: New file.
1404 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1405 (mips16_reg_names): New static array.
1406 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1407 after seeing a 16 bit symbol.
1408 (print_insn_little_mips): Likewise.
1409 (print_insn_mips16): New static function.
1410 (print_mips16_insn_arg): New static function.
1411 * mips-opc.c: Add jalx instruction.
1412 * Makefile.in (mips16-opc.o): New target.
1413 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1414 * configure: Rebuild.
1416 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1418 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1419 operand specifiers in *save, *restore and movem* instructions.
1421 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1424 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1425 register operands for immediate arithmetic, not, neg, negx, and
1426 set according to condition instructions.
1428 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1429 specifier of the effective-address operand in immediate forms of
1430 arithmetic instructions. The specifier for the immediate operand
1431 notes how and where the constant will be stored.
1433 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1435 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1438 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1441 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1443 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1445 * mn10300-dis.c (disassemble): Handle register lists.
1447 * mn10300-opc.c: Fix handling of register list operand for
1448 "call", "ret", and "rets" instructions.
1450 * mn10300-dis.c (disassemble): Print PC-relative and memory
1451 addresses symbolically if possible.
1452 * mn10300-opc.c: Distinguish between absolute memory addresses,
1453 pc-relative offsets & random immediates.
1455 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1457 (disassemble): Handle SPLIT and EXTENDED operands.
1459 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1461 * mn10300-dis.c: Rough cut at printing some operands.
1463 * mn10300-dis.c: Start working on disassembler support.
1464 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1466 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1468 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1470 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1472 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1474 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1476 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1477 register argument is calls and jmp instructions.
1479 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1481 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1482 getx operand. Fix opcode for mulqu imm,dn.
1484 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1486 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1487 in MN10300_OPERAND_SPLIT operands for how many bits
1488 appear in the basic insn word. Add IMM32_HIGH24,
1489 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1490 (mn10300_opcodes): Use new operands as needed.
1492 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1493 for bset, bclr, btst instructions.
1494 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1496 * mn10300-opc.c (mn10300_operands): Remove many redundant
1497 operands. Update opcode table as appropriate.
1498 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1499 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1501 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1503 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1504 operands (for indexed load/stores). Fix bitpos for DI
1505 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1506 few instructions that insert immediates/displacements in the
1507 middle of the instruction. Add IMM8E for 8 bit immediate in
1508 the extended part of an instruction.
1509 (mn10300_operands): Use new opcodes as appropriate.
1511 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1513 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1514 sequential so the assembler never parallelizes it with
1517 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1519 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1520 a data/address register that appears in register field 0
1521 and register field 1.
1522 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1524 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1526 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1527 standard disassembly.
1529 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1530 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1531 Recategorize PALcode instructions.
1533 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1535 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1537 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1539 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1540 there are no operand types.
1542 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1544 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1546 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1548 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1550 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1552 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1554 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1555 and sst.w instructions.
1557 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1560 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1562 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1565 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1567 * ppc-opc.c (PPCPWR2): Define.
1568 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1571 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1573 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1574 field for movhu instruction.
1576 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1577 cast value to "long" not "signed long" to keep hpux10
1580 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1582 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1585 * mn10300-opc.c (FMT*): Remove definitions.
1587 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1588 for shift-by-register opcodes.
1590 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1591 into [AD][MN][01] for encoding the position of the register
1594 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1596 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1597 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1599 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1601 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1602 Fix various typos. Add "PAREN" operand.
1603 (MEM, MEM2): Define.
1604 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1605 operands. Fix several typos.
1607 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1610 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1612 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1613 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1615 (mn10300_opcodes): Break opcode format out into its own field.
1616 Update many operand fields to deal with signed vs unsigned
1617 issues. Fix one or two typos in the "mov" instruction
1618 opcode, mask and/or operand fields.
1620 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1622 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1623 m68851 wasn't reset.
1625 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1627 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1628 all opcodes. Very rough cut at operands for all opcodes.
1630 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1633 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1635 * mn10200-opc.c, mn10300-opc.c: New files.
1636 * mn10200-dis.c, mn10300-dis.c: New files.
1637 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1638 * disassemble.c: Break mn10x00 support into 10200 and 10300
1640 * configure.in: Likewise.
1641 * configure: Rebuilt.
1643 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1645 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1647 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1649 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1651 * disassemble (ARCH_mn10x00): Define.
1652 (disassembler): Handle bfd_arch_mn10x00.
1653 * configure.in: Recognize bfd_mn10x00_arch.
1654 * configure: Rebuilt.
1656 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1658 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1659 accordingly. Don't declare functions using op_rtn.
1661 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1663 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1664 params to be more standard.
1665 * (disassemble): Print absolute addresses and symbolic names for
1666 branch and jump targets.
1667 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1669 * (v850_opcodes): Add breakpoint insn.
1671 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1673 * m68k-opc.c: Move the fmovemx data register cases before the
1674 other cases, so that they get recognized before the data register
1675 does gets treated as a degenerate register list.
1677 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1679 * mips-opc.c: Add a case for "div" and "divu" with two registers
1680 and a destination of $0.
1682 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1684 * mips-dis.c (print_insn_arg): Add prototype.
1685 (_print_insn_mips): Ditto.
1687 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1689 * mips-dis.c (print_insn_arg): Print condition code registers as
1692 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1694 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1696 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1698 * v850-dis.c (disassemble): Make static. Provide prototype.
1700 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1702 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1705 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1707 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1708 ']' characters into the output stream.
1709 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1710 Add "memop" field to all opcodes (for the disassembler).
1711 Reorder opcodes so that "nop" comes before "mov" and "jr"
1712 comes before "jarl".
1714 * v850-dis.c (print_insn_v850): Fix typo in last change.
1716 * v850-dis.c (print_insn_v850): Properly handle disassembling
1717 a two byte insn at the end of a memory region when the memory
1718 region's size is only two byte aligned.
1720 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1722 * v850-dis.c (v850_reg_names): Define.
1723 (v850_sreg_names, v850_cc_names): Likewise.
1724 (disassemble): Very rough cut at printing operands (unformatted).
1726 * v850-opc.c (BOP_MASK): Fix.
1727 (v850_opcodes): Fix mask for jarl and jr.
1729 * v850-dis.c: New file. Skeleton for disassembler support.
1730 * Makefile.in Remove v850 references, they're not needed here.
1731 * configure.in: Add v850-dis.o when building v850 toolchains.
1732 * configure: Rebuilt.
1733 * disassemble.c (disassembler): Call v850 disassembler.
1735 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1736 (insert_d8_6, extract_d8_6): New functions.
1737 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1738 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1740 (IF4A, IF4B): Use "D7" instead of "D7S".
1741 (IF4C, IF4D): Use "D8_7" instead of "D8".
1742 (IF4E, IF4F): New. Use "D8_6".
1743 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1744 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1746 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1747 (v850_operands): Change D16 to D16_15, use special insert/extract
1748 routines. New new D16 that uses the generic insert/extract code.
1749 (IF7A, IF7B): Use D16_15.
1750 (IF7C, IF7D): New. Use D16.
1751 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1753 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1754 message. Issue an error if the branch offset is odd.
1756 * v850-opc.c: Add notes about needing special insert/extract
1757 for all the load/store insns, except "ld.b" and "st.b".
1759 * v850-opc.c (insert_d22, extract_d22): New functions.
1760 (v850_operands): Use insert_d22 and extract_d22 for
1762 (insert_d9): Fix range check.
1764 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1766 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1767 and set bits field to D9 and D22 operands.
1769 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1771 * v850-opc.c (v850_operands): Define SR2 operand.
1772 (v850_opcodes): "ldsr" uses R1,SR2.
1774 * v850-opc.c (v850_opcodes): Fix opcode specs for
1775 sld.w, sst.b, sst.h, sst.w, and nop.
1777 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1779 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1780 end of the opcode table.
1782 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1784 * d10v-opc.c (pre_defined_registers): Added register pairs,
1785 "r0-r1", "r2-r3", etc.
1787 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1789 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1790 Create I16U for an unsigned 16bit mmediate operand.
1791 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1793 * v850-opc.c (v850_operands): Define EP operand.
1794 (IF4A, IF4B, IF4C, IF4D): Use EP.
1796 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1797 with immediate operand, "movhi". Tweak "ldsr".
1799 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1800 correct. Get sld.[bhw] and sst.[bhw] closer.
1802 * v850-opc.c (v850_operands): "not" is a two byte insn
1804 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1806 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1808 * v850-opc.c (two): Get order of words correct.
1810 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1812 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1813 register source and destination operands.
1814 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1816 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1817 same thinko in "trap" opcode.
1819 * v850-opc.c (v850_opcodes): Add initializer for size field
1822 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1823 Add D8 for 8-bit unsigned field in short load/store insns.
1824 (IF4A, IF4D): These both need two registers.
1825 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1826 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1827 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1828 for "ldsr" and "stsr".
1829 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1832 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1833 short store word (sst.w).
1835 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1837 * v850-opc.c (v850_operands): Added insert and extract fields,
1838 pointers to functions that handle unusual operand encodings.
1840 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1842 * v850-opc.c (v850_opcodes): Enable "trap".
1844 * v850-opc.c (v850_opcodes): Fix order of displacement
1845 and register for "set1", "clr1", "not1", and "tst1".
1847 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1849 * v850-opc.c (v850_operands): Add "B3" support.
1850 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1853 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1855 * v850-opc.c: Close unterminated comment.
1857 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1859 * v850-opc.c (v850_operands): Add flags field.
1860 (v850_opcodes): add move opcodes.
1862 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1864 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1865 * configure: (bfd_v850v_arch) Add new case.
1866 * configure.in: (bfd_v850_arch) Add new case.
1867 * v850-opc.c: New file.
1869 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1871 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1873 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1875 * d10v-opc.c: Add additional information to the opcode
1876 table to help determinine which instructions can be done
1879 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1881 * mpw-make.sed: Update editing of include pathnames to be
1884 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1886 * arm-opc.h: Added "bx" instruction definition.
1888 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1890 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1892 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1894 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1896 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1898 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1900 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1902 * makefile.vms: Update for alpha-opc changes.
1904 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1906 * i386-dis.c (print_insn_i386): Actually return the correct value.
1907 (ONE, OP_ONE): #ifdef out; not used.
1909 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1911 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1912 Changed subi operand type to treat 0 as 16.
1914 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1916 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1919 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1921 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1922 memory transfer instructions. Add new format string entries %h and %s.
1923 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1926 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1928 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1929 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1931 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1933 * alpha-dis.c (print_insn_alpha_osf): Remove.
1934 (print_insn_alpha_vms): Remove.
1935 (print_insn_alpha): Make globally visible. Chose the register
1936 names based on info->flavour.
1937 * disassemble.c: Always return print_insn_alpha for the alpha.
1939 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1941 * d10v-dis.c (dis_long): Handle unknown opcodes.
1943 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1945 * d10v-opc.c: Changes to support signed and unsigned numbers.
1946 All instructions with the same name that have long and short forms
1947 now end in ".l" or ".s". Divs added.
1948 * d10v-dis.c: Changes to support signed and unsigned numbers.
1950 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1952 * d10v-dis.c: Change all functions to use info->print_address_func.
1954 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1956 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1957 move ccr/sr insns more strict so that the disassembler only
1958 selects them when the addressing mode is data register.
1960 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1961 * d10v-opc.c (pre_defined_registers): Declare.
1962 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1963 to pick a better name for the registers.
1965 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1967 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1968 operands for fexpand and fpmerge. From Christian Kuehnke
1969 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1971 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1973 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1974 print routine. Take new regnames and cpumask arguments.
1975 Kill the environment variable nonsense.
1976 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1977 (print_insn_alpha_vms): New function. Do VMS style regnames.
1978 * disassemble.c (disassembler): Test bfd flavour to pick
1979 between OSF and VMS routines. Default to OSF.
1981 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1983 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1984 * configure: Rebuild.
1985 * Makefile.in (install): Use @INSTALL_SHLIB@.
1987 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1989 * configure: (bfd_d10v_arch) Add new case.
1990 * configure.in: (bfd_d10v_arch) Add new case.
1991 * d10v-dis.c: New file.
1992 * d10v-opc.c: New file.
1993 * disassemble.c (disassembler) Add entry for d10v.
1995 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1997 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1998 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2000 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2002 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2003 distinguish between variants of the instruction set.
2004 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2005 distinguish between variants of the instruction set.
2007 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2009 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2010 the 8086 instruction set.
2011 * i386-dis.c: General cleanups. Make most things static. Add
2012 prototypes. Get rid of static variables aflags and dflags. Pass
2013 them as args (to almost everything).
2015 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2017 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2019 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2021 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2022 if the next arg is marked with SRC_IN_DST. Gross.
2024 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2025 we're looking for and find EXR.
2027 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2028 if we're looking for KBIT and we don't find it.
2030 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2033 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2034 3bit immediate operands.
2036 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2038 * Released binutils 2.7.
2040 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2041 <kkaempf@progis.ac-net.de>.
2043 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2045 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2047 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2049 * sparc-dis.c (print_insn_sparclite): New routine to print
2050 sparclite instructions.
2052 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2054 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2056 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2058 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2059 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2060 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2062 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2064 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2065 Use autoconf-set values.
2066 (docdir, oldincludedir): Removed.
2067 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2069 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2071 * alpha-opc.c: New file.
2072 * alpha-opc.h: Remove.
2073 * alpha-dis.c: Complete rewrite to use new opcode table.
2074 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2075 * configure: Rebuild with autoconf 2.10.
2076 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2077 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2079 (alpha-opc.o): New target.
2081 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2083 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2084 Set imm_added_to_rs1 even if the source and destination register
2087 * sparc-opc.c: Add some two operand forms of the wr instruction.
2089 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2091 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2094 * disassemble.c (disassembler): Handle H8/S.
2095 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2097 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2099 * sparc-opc.c: Add beq/teq as aliases for be/te.
2101 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2102 <sergei@msil.sps.mot.com>.
2104 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2106 * makefile.vms: New file.
2108 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2110 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2112 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2115 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2117 * i386-dis.c (OP_OFF): Call append_prefix.
2119 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2121 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2122 unsigned long to silence a warning from the Solaris PowerPC
2125 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2127 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2129 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2131 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2133 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2134 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2135 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2136 cpush, cpusha, cpull sparclet insns.
2138 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2140 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2142 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2144 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2145 Set F_FLOAT on other floating point instructions.
2147 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2149 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2151 (powerpc_opcodes): Add 860/821 specific SPRs.
2153 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2155 * configure.in: Permit --enable-shared to specify a list of
2156 directories. Set and substitute BFD_PICLIST.
2157 * configure: Rebuild.
2158 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2159 uses. Set to @BFD_PICLIST@.
2161 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2163 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2164 not "abs", which may be needed for the absolute in something
2165 like btst #0,@10:8. Print L_3 immediates separately from other
2166 immediates. Change ABSMOV reference to ABS8MEM.
2168 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2170 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2171 (current_arch_mask): New static global.
2172 (compute_arch_mask): New static function.
2173 (print_insn_sparc): Delete sparc_v9_p. New static local
2174 current_mach. Resort opcode table if current_mach changes.
2175 Generalize "insn not supported" test.
2176 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2177 Delete test for v9/!v9.
2178 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2180 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2181 (brfcx): Renamed to FBRX.
2182 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2183 coprocessor mnemonics are not supported on the sparclet).
2184 (condf): Renamed to CONDF.
2185 (SLCBCC2): Delete F_ALIAS flag.
2187 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2189 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2190 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2192 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2194 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2195 that the shared library version number is set correctly.
2197 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2199 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2200 Miles Bader <miles@gnu.ai.mit.edu>.
2201 * configure: Rebuild.
2203 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2205 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2208 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2210 * configure: Rebuild with autoconf 2.8.
2212 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2214 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2215 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2217 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2219 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2220 since they appear as targets in Makefile.in.
2221 * configure: Rebuild.
2223 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2225 * mpw-make.sed: Edit out shared library support bits.
2227 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2229 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2230 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2231 (sparc_opcodes): Add sparclet insns.
2232 (sparclet_cpreg_table): New static local.
2233 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2234 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2236 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2238 * i386-dis.c (index16): New static variable.
2239 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2241 (OP_indirE): Return result of OP_E.
2242 (OP_E): Check for 16 bit addressing mode, and disassemble
2243 correctly. Optimised 32 bit case a little. Don't print
2244 "(base,index,scale)" when sib specifies only an offset.
2246 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2248 * configure.in: Set and substitute SHLIB_DEP.
2249 * configure: Rebuild.
2250 * Makefile.in (SHLIB_DEP): New variable.
2251 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2252 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2253 COMMON_SHLIB, add them to piclist with appropriate modifications.
2254 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2255 here: just use piclist.
2257 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2259 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2260 (print_insn_sparc): Rewrite v9/not-v9 tests.
2261 (compare_opcodes): Likewise.
2262 * sparc-opc.c (MASK_<ARCH>): Define.
2263 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2264 (sparclet,v6notv9): Define.
2265 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2266 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2268 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2270 * configure.in: Call AC_PROG_CC before configure.host.
2271 * configure: Rebuild.
2273 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2275 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2277 * i386-dis.c (onebyte_has_modrm): New static array.
2278 (twobyte_has_modrm): New static array.
2279 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2281 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2283 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2286 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2288 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2291 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2293 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2294 m68010up, not just m68020up | cpu32.
2296 * Makefile.in (SONAME): New variable.
2297 ($(SHLINK)): Make a link to the transformed name, as well.
2298 (stamp-tshlink): New target.
2299 (install): Skip stamp-tshlink during install.
2301 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2303 * configure.in: Call AC_ARG_PROGRAM.
2304 * configure: Rebuild.
2305 * Makefile.in (program_transform_name): New variable.
2306 (install): Transform library name before installing it.
2308 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2310 * i960-dis.c (mem): Add HX dcinva instruction.
2312 Support for building as a shared library, based on patches from
2313 Alan Modra <alan@spri.levels.unisa.edu.au>:
2314 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2315 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2316 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2317 * configure: Rebuild.
2318 * Makefile.in (ALLLIBS): New variable.
2319 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2320 (COMMON_SHLIB, SHLINK): New variables.
2321 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2322 (STAGESTUFF): Remove variable.
2323 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2324 (stamp-piclist, piclist): New targets.
2325 ($(SHLIB), $(SHLINK)): New targets.
2326 ($(OFILES)): Depend upon stamp-picdir.
2327 (disassemble.o): Build twice if PICFLAG is set.
2328 (MOSTLYCLEAN): Add pic/*.o.
2329 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2330 (distclean): Remove pic and stamp-picdir.
2331 (install): Install shared libraries.
2332 (stamp-picdir): New target.
2334 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2336 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2337 Print unknown instruction as "unknown", rather than in hex.
2339 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2341 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2343 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2345 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2347 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2349 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2350 when necessary. From Ulrich Drepper
2351 <drepper@myware.rz.uni-karlsruhe.de>.
2353 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2355 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2356 sparc_num_opcodes. Update architecture enum values.
2357 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2358 (sparc_opcode_lookup_arch): New function.
2359 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2360 (sparc_opcodes): Add v9a shutdown insn.
2362 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2364 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2365 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2367 (print_insn_sparc64): Deleted.
2368 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2371 * sparc-opc.c (architecture_pname): Add v9a.
2373 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2375 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2376 incorrectly defined as 0x16 when it should be 0x15.
2377 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2378 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2379 excb (exception barrier) which is defined in the Alpha
2380 Architecture Handbook version 2.
2381 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2382 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2383 disassembled as or, for example.
2385 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2387 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2388 (_print_insn_mips): Change i from int to unsigned int.
2390 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2392 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2393 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2395 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2397 * i386-dis.c: Added Pentium Pro instructions.
2399 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2401 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2404 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2406 * sh-opc.h (sh_nibble_type): Added REG_B.
2407 (sh_arg_type): Added A_REG_B.
2408 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2410 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2412 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2414 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2416 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2418 * Makefile.in (distclean): Remove stamp-h. From Ronald
2419 F. Guilmette <rfg@monkeys.com>.
2421 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2423 From David Mosberger-Tang <davidm@azstarnet.com>:
2424 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2427 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2429 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2430 (sh_table): Added many SH3 opcodes.
2431 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2433 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2435 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2436 (subco,subco.): Mark this PPC, not PPCCOM.
2438 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2440 * configure: Rebuild with autoconf 2.7.
2442 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2444 * configure: Rebuild with autoconf 2.6.
2446 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2448 * configure.in: Sort list of architectures. Accept but do nothing
2449 for alliant, convex, pyramid, romp, and tahoe.
2451 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2453 * a29k-dis.c (print_special): Change num to unsigned int.
2455 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2457 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2460 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2462 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2463 * configure: Rebuilt.
2465 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2467 * configure.in: Add case for bfd_i860_arch.
2468 * configure: Rebuild.
2470 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2472 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2473 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2474 (NEXTDOUBLE): Likewise.
2475 (print_insn_m68k): Don't match fmoveml if there is more than one
2476 register in the list.
2477 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2479 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2481 * m68k-opc.c: Use #W rather than #w.
2482 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2484 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2486 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2487 and likewise for all the dbxx opcodes.
2489 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2491 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2493 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2495 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2496 the VR4100 specific instructions to the mips_opcodes structure.
2498 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2500 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2501 ugly Metrowerks bug in CW6, is fixed in CW7.
2503 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2505 * ppc-opc.c (whole file): Add flags for common/any support.
2507 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2509 * Makefile.in (BISON): Remove macro.
2510 (FLAGS_TO_PASS): Remove BISON.
2512 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2514 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2516 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2517 instructions that take no args by looking at the match mask.
2518 (print_insn_arg): Always print "%" before register names.
2519 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2520 [case '_']: Don't print "@#" before address.
2521 [case 'J']: Use "%s" as format string, not register name.
2522 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2524 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2526 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2529 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2531 From David Mosberger-Tang <davidm@azstarnet.com>
2533 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2534 (alpha_insn_set): added definitions for VAX floating point
2535 instructions (Unix compilers don't generate these, but handcoded
2536 assembly might still use them).
2538 * alpha-dis.c (print_insn_alpha): added support for disassembling
2539 the miscellaneous instructions in the Alpha instruction set.
2541 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2543 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2544 no longer create sysdep.h, sed ppc-opc.c to work around a
2545 serious Metrowerks C bug.
2546 * mpw-make.in: Remove.
2547 * mpw-make.sed: New file, used by mpw-configure to edit
2548 Makefile.in into an MPW makefile.
2550 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2552 * Makefile.in (maintainer-clean): New synonym for realclean.
2554 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2556 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2557 which use '0', '1', and '2' instead. Specify the proper size for
2558 a pmove immediate operand. Correct the pmovefd patterns to be
2559 moves to a register, not from a register.
2560 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2562 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2564 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2565 %psr, %wim, %tbr as F_NOTV9.
2567 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2569 * Makefile.in (Makefile): Just rebuild Makefile when running
2571 (config.h, stamp-h): New targets.
2572 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2573 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2574 rebuilding config.h.
2575 * configure: Rebuild.
2577 * mips-opc.c: Change unaligned loads and stores with "t,A"
2578 operands to use "t,A(b)".
2580 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2582 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2584 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2586 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2587 until 3 instead of until 2.
2589 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2591 * Makefile.in (ALL_CFLAGS): Define.
2592 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2593 (MOSTLYCLEAN): Add config.log.
2594 (distclean): Don't remove config.log.
2595 * configure.in: Substitute HDEFINES.
2596 * configure: Rebuild.
2598 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2600 * sh-opc.h (sh_arg_type): Add F_FR0.
2601 (sh_table, case fmac): Add F_FR0 as first argument.
2603 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2605 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2607 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2609 * sparc-dis.c: Remove all references to NO_V9.
2611 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2613 * aclocal.m4: Just include ../bfd/aclocal.m4.
2614 * configure: Rebuild.
2616 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2618 * sparc-dis.c (X_DISP19): Define.
2619 (print_insn, case 'G'): Use it.
2620 (print_insn, case 'L'): Sign extend displacement.
2622 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2624 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2625 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2626 host_makefile_frag or frags.
2627 * aclocal.m4: New file.
2628 * configure: Rebuild.
2629 * Makefile.in (INSTALL): Set to @INSTALL@.
2630 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2631 (INSTALL_DATA): Set to @INSTALL_DATA@.
2633 (AR_FLAGS): Set to rc rather than qc.
2634 (CC): Define as @CC@.
2635 (CFLAGS): Set to @CFLAGS@.
2636 (@host_makefile_frag@): Remove.
2637 (config.status): Remove dependency upon @frags@.
2639 * configure.in: ../bfd/config.bfd now just sets shell variables.
2640 Use them rather than looking through target Makefile fragments.
2641 * configure: Rebuild.
2643 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2645 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2647 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2649 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2650 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2653 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2654 (lookup_{name,value}): New functions.
2655 (prefetch_table): New static local.
2656 (sparc_{encode,decode}_prefetch): New functions.
2657 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2659 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2661 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2664 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2666 * sh-dis.c: Correct comment on first line of file.
2668 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2670 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2672 * sparc-opc.c (asi, membar): New static locals.
2673 (sparc_{encode,decode}_{asi,membar}): New functions.
2674 (sparc_opcodes, membar insn): Fix.
2675 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2676 Support decoding of membar masks.
2679 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2681 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2683 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2685 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2686 and likewise for the other branches. Add bhs as an alias for bcc,
2687 and likewise for the size variants. Add dbhs as an alias for
2690 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2692 * sh-opc.h (FP sts instructions): Update to match reality.
2694 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2696 * m68k-dis.c: (fpcr_names): Add % before all register names.
2697 (reg_names): Likewise.
2698 (print_insn_arg): Don't explicitly print % before register names.
2699 Add % before register names in static array names. In case 'r',
2700 print data registers as `@(Dn)', not `Dn@'. When printing a
2701 memory address, don't print @# before it.
2702 (print_indexed): Change base_disp and outer_disp from int to
2703 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2704 syntax. Sign extend 8 byte displacement correctly.
2705 (print_base): Print using MIT syntax. Print zpc when appropriate.
2706 Change parameter disp from int to bfd_vma.
2708 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2711 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2713 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2714 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2715 * sh-opc.h (sh_arg_type): Add new operand types.
2716 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2718 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2720 * Makefile.in (distclean): Remove generated file config.h.
2722 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2724 * Makefile.in (distclean): Remove generated file config.h.
2726 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2728 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2730 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2732 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2733 rather than numopcodes. Use m68k_opcodes rather than removed
2734 opcode function. Don't check F_ALIAS.
2735 (print_insn_arg): Change first parameter to be const char *.
2736 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2737 (m68k-opc.o): New target.
2738 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2739 * configure: Rebuild.
2741 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2743 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2744 (opcode_bits, opcode_hash_table): New variables.
2745 (opcodes_initialized): Renamed from opcodes_sorted.
2746 (build_hash_table): New function.
2747 (is_delayed_branch): Use hash table.
2748 (print_insn): Renamed from print_insn_sparc, made static.
2749 Build and use hash table. If !sparc64, ignore sparc64 insns,
2750 and vice-versa if sparc64.
2751 (print_insn_sparc, print_insn_sparc64): New functions.
2752 (compare_opcodes): Move sparc64 opcodes to end.
2753 Print commutative insns with constant second.
2754 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2756 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2758 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2759 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2760 avoids printing a delay slot in a delay slot.
2761 * sh-opc.h (sh_table): Fully bracket last entry.
2763 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2765 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2767 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2769 * configure.in: Get host_makefile_frag from ${srcdir}.
2771 * configure.in: Autoconfiscated. Check for string[s].h. Create
2772 config.h from config.in. Don't set up sysdep.h link.
2773 * sysdep.h: New file.
2774 * configure, config.in: New files, generated from configure.in.
2775 * Makefile.in: Updated to be processed autoconf-style.
2776 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2777 (Makefile): Depend on config.status.
2778 (config.status): New rule.
2779 * configure.bat: Update Makefile substitutions.
2781 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2783 * mips-opc.c (L1): Define.
2784 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2785 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2788 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2790 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2791 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2792 have multiple add units but only a single logical unit.
2794 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2795 shifted by 18, without any insertion or extraction function.
2796 (insert_cr, extract_cr): Remove.
2798 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2800 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2803 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2805 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2806 * sh-opc.h: Add copyright.
2808 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2810 * Makefile.in (crunch-m68k): Delete extra target accidentally
2811 checked in a while ago.
2813 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2815 * sh-opc.h (sh_table): Add SH3 support.
2817 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2819 * sh-opc.h: Added bsrf and braf.
2821 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2823 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2824 bogus [ls]fm{ea,fd} patterns.
2826 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2827 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2828 initialize it from memory. Make function static.
2829 (print_insn_{big,little}_arm): New functions.
2830 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2831 the correct endianness.
2833 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2835 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2838 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2840 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2841 17th, so that it builds again using GCC as the compiler.
2843 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2845 * mips-dis.c (print_insn_little_mips): Cast return value from
2846 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2847 expects an unsigned long, and that might be fewer words of
2848 argument storage (e.g., if bfd_vma is long long on a 32-bit
2850 (print_insn_big_mips): Likewise with bfd_getb32 value.
2851 (_print_insn_mips): Now static.
2853 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2855 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2856 gcc memory hog problem with initializer is fixed.
2858 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2860 Merge in support for Mac MPW as a host.
2861 (Old change descriptions retained for informational value.)
2863 * mpw-config.in (archname): Compute from the config.
2864 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2866 * mpw-config.in (target_arch): Compute from canonical target.
2867 (m68k, mips, powerpc, sparc): Add architectures.
2868 * mpw-make.in (disassemble.c.o): Add.
2869 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2871 * mpw-config.in (BFD_MACHINES): Set to a default value.
2872 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2874 * mpw-make.in (CSEARCH): Add extra-include to search path.
2876 * mpw-config.in (varargs.h): Don't create.
2877 (sysdep.h): Create using forward-include.
2878 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2880 * mpw-config.in: New file, MPW version of configure.in.
2881 * mpw-make.in: New file, MPW version of Makefile.in.
2883 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2885 * alpha-dis.c (print_insn_alpha): Put empty statement after
2888 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2890 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2891 (low_sign_extend): Likewise.
2892 (get_field): Delete unused function.
2893 (set_field, deposit_14, deposit_21): Likewise.
2895 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2897 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2900 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2902 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2904 * alpha-opc.h (OSF_ASMCODE): define
2905 print pal-code names as defined in App C of the
2906 Alpha Architecture Reference Manual
2908 * alpha-dis.c: cleaned up output
2909 print stylized code forms as defined in App A.4.3 of the
2910 Alpha Architecture Reference Manual
2912 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2914 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2916 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2919 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2921 * m68k-dis.c (opcode): New function. Returns address of opcode
2922 table entry given index, even if the opcode table was split to
2923 work around gcc bugs.
2924 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2926 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2927 (reg_names): Now const.
2928 (print_insn_arg): Arrays cacheFieldName and names now const.
2929 (print_indexed): Array scales now const.
2931 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2933 * ppc-opc.c: Sort recently added instructions by minor opcode
2934 number within major opcode number.
2936 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2938 * hppa-dis.c: Include libhppa.h.
2940 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2942 * mips-opc.c: Change dli to use M_DLI, and add dla.
2944 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2946 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2948 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2950 * mips-opc.c: Add r4650 mul instruction.
2952 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2954 * mips-opc.c: Add uld and usd macros for unaligned double load and
2957 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2959 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2960 mfdcr, mtdcr, icbt, iccci.
2962 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2964 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2965 signed char fields to shorts, more portable.
2967 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2969 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2970 char fields as signed chars, since they may have negative values.
2972 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2974 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2975 (mycroft@netbsd.org).
2977 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2979 From "Logg, Ed" <elogg@ea.com>:
2980 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2981 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2984 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2986 * ppc-opc.c: Changes based on patch from David Edelsohn
2987 <edelsohn@mhpcc.edu>.
2988 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2991 (insert_tbr): New static function.
2992 (extract_tbr): New static function.
2993 (XFXFXM_MASK, XFXM): Define.
2994 (XSPRBAT_MASK, XSPRG_MASK): Define.
2995 (powerpc_opcodes): Add instructions to access special registers by
2996 name. Add mtcr and mftbu.
2998 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3000 * mips-opc.c (P3): Define.
3001 (mips_opcodes): Add mad and madu.
3003 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3005 * configure.in: Add W65 support.
3006 * disassemble.c: Likewise.
3007 * w65-opc.h, w65-dis.c: New files.
3009 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3011 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3014 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3016 * mips-opc.c: Add dli as a synonym for li.
3018 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3020 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3021 print something for reserved opcode values, even if it won't
3024 * mips-dis.c (_print_insn_mips): When initializing, shift right
3025 and mask, to avoid sign extension problems on the Alpha.
3027 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3030 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3032 * sh-opc.h (mov.l gbr): Get direction right.
3033 * sh-dis.c (print_insn_shx): New function.
3034 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3035 print opcodes with right byte order.
3037 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3039 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3040 to avoid conflicts with getopt.
3042 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3044 * hppa-dis.c (print_insn_hppa): Read the instruction using
3045 bfd_getb32, so that it works on a little endian or 64 bit host.
3046 Remove unused local variable op.
3048 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3050 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3051 addu does not work correctly if -mips3.
3053 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3055 * a29k-dis.c (print_special): Add special register names defined
3056 on 29030, 29040 and 29050.
3057 (print_insn): Handle new operand type 'I'.
3059 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3061 * Makefile.in (INSTALL): Use top level install.sh script.
3063 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3065 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3066 that it works on a little endian host.
3068 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3070 * configure.in: Use ${config_shell} when running config.bfd.
3072 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3074 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3076 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3078 * a29k-dis.c (print_insn): Print the opcode.
3080 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3082 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3084 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3086 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3088 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3090 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3091 which store a value into memory.
3093 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3095 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3096 * arm-dis.c, arm-opc.h: New files.
3098 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3100 * Makefile.in (ns32k-dis.o): Add dependency.
3101 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3102 string, not as array of chars.
3104 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3106 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3108 * sparc-opc.c: Added sparclite extended FP operations, and
3109 versions of v9 impdep* instructions permitting specification of
3112 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3114 * i960-dis.c (reg_names): Now const.
3115 (struct sparse_tabent): New type, copied from array type in mem
3117 (ctrl): Local static array ctrl_tab now const.
3118 (cobr): Local static array cobr_tab now const.
3119 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3120 static variable mem_tab no longer explicitly initialized. Changed
3121 mem_init to const array of struct sparse_tabent.
3122 (reg): Local static variable reg_tab no longer explicitly
3123 initialized. Changed reg_init to const array of struct
3125 (ea): Local static array scale_tab now const.
3127 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3130 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3132 * configure.bat: the disassember needs to be enabled for
3133 "objdump -d" to work in djgpp.
3135 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3137 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3138 (invalid_float): Enabled general version, doesn't require running
3139 on ns32k host. Changed to take char* argument, and test for
3140 explicitly specified sizes, instead of using sizeof() on host CPU
3142 (INVALID_FLOAT): Cast first argument.
3143 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3144 list_P032, list_M032): Now const.
3145 (optlist, list_search): Made appropriate arguments now point to
3147 (print_insn_arg): Changed static array of one-character-string
3148 pointers into a static const array of characters; fixed sprintf
3149 statement accordingly.
3151 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3153 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3154 from distribution. A ns32k-dis.c from a previous distribution has
3155 been brought up to date and supports the new interface.
3157 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3159 * configure.in: add bfd_ns32k_arch target support.
3161 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3162 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3164 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3166 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3169 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3171 * h8300-dis.c, mips-dis.c: Don't use true and false.
3173 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3175 * configure.in: Change --with-targets to --enable-targets.
3177 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3179 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3180 opcodes to the first instruction with that opcode, to speed
3181 disassembly of large files. From ralphc@pyramid.com (Ralph
3184 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3186 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3188 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3190 * configure.bat: update to latest makefile.in
3192 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3194 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3195 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3196 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3197 slot insn is in a delay slot.
3198 * z8k-opc.h: (resflg): Fix patterns.
3199 * h8500-opc.h Fix CR insn patterns.
3201 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3203 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3204 "cmpl" before POWER versions, so that gas -many uses them.
3206 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3208 * disassemble.c: New file.
3209 * Makefile.in (OFILES): Add disassemble.o.
3210 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3211 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3212 binutils/configure.in.
3214 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3215 opcode being examined.
3217 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3219 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3220 (insert_ral, insert_ram, insert_ras): New functions.
3221 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3222 RAS for store with update.
3224 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3226 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3227 (edelsohn@npac.syr.edu).
3229 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3231 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3234 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3236 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3238 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3240 * ppc-opc.c (powerpc_operands): The signedp field has been
3241 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3242 instead. Add new operand SISIGNOPT.
3243 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3244 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3245 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3248 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3250 * i386-dis.c (struct private): Renamed to dis_private. `private'
3251 is a reserved word for dynix cc.
3253 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3255 * configure.in: Change error message to refer to bfd/config.bfd
3256 rather than bfd/configure.in.
3258 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3260 * ppc-opc.c: Define POWER2 as short alias flag.
3261 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3264 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3266 * i960-dis.c (print_insn_i960): Don't read a second word for
3267 opcodes 0, 1, 2 and 3.
3269 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3271 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3273 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3275 * m68881-ext.c: Removed; no longer used.
3276 * Makefile.in: Changed accordingly.
3278 * m68k-dis.c (ext_format_68881): Don't declare.
3279 (print_insn_m68k): If an instruction uses place 'i', it uses at
3280 least four fixed bytes.
3281 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3282 extended float, convert to double using floatformat_to_double, not
3283 ieee_extended_to_double, and fetch the data before converting it.
3285 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3287 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3288 davidj@ICSI.Berkeley.EDU (David Johnson).
3290 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3292 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3293 PowerPC uses bdnz[l][a].
3295 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3297 * dis-buf.c, i386-dis.c: Include sysdep.h.
3299 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3301 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3303 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3304 by Motorola PowerPC 601 with PPC_OPCODE_601.
3305 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3306 Disassemble Motorola PowerPC 601 instructions as well as normal
3307 PowerPC instructions.
3309 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3311 * i960-dis.c (reg, mem): Just use a static array instead of
3314 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3316 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3317 condition name index if this is for a negated condition.
3319 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3320 Floating point format for 'H' operand is backwards from normal
3321 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3322 operands (fmpyadd and fmpysub), handle bizarre register
3323 translation correctly for single precision format.
3325 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3326 or 'I' operands if the next format specifier is 'M' (fcmp
3327 condition completer).
3329 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3331 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3332 single number giving a bitmask for the MB and ME fields of an M
3333 form instruction. Change NB to accept 32, and turn it into 0;
3334 also turn 0 into 32 when disassembling. Seperated SH from NB.
3335 (insert_mbe, extract_mbe): New functions.
3336 (insert_nb, extract_nb): New functions.
3337 (SC_MASK): Mask out SA and LK bits.
3338 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3339 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3340 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3341 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3342 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3343 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3344 (powerpc_macros): Define table of macro definitions.
3345 (powerpc_num_macros): Define.
3347 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3348 if PPC_OPERAND_NEXT is set.
3350 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3352 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3353 char. Retrieve contents using bfd_getl32 instead of shifting.
3355 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3357 * ppc-opc.c: New file. Opcode table for PowerPC, including
3358 opcodes for POWER (RS/6000).
3359 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3360 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3361 (CFILES): Add ppc-dis.c.
3362 (ppc-dis.o, ppc-opc.o): New targets.
3363 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3365 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3367 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3368 No space before 'u', 'f', or 'N'.
3370 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3372 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3373 farther than we should.
3375 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3377 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3379 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3381 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3383 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3384 needs it, to prevent reading past the end of a section.
3386 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3388 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3389 Removed t,A case for la; always use t,A(b) case.
3391 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3393 From Ted Lemen <mellon@pepper.ncd.com>
3394 * mips-dis.c (print_insn_arg): Handle 'k'.
3395 * mips-opc.c: Make cache use k, not t.
3397 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3399 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3400 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3401 FLOAT_FORMAT_CODE to put out floating point register names.
3403 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3405 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3407 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3409 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3411 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3413 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3414 larger than 32. Moved dsxx32 variants first for disassembler.
3416 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3418 * z8kgen.c, z8k-opc.h: Add full lda information.
3420 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3422 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3423 movb instructions. Any necessary space will be emitted by
3424 the code to handle nullification completers.
3426 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3428 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3430 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3432 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3433 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3435 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3437 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3439 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3441 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3442 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3444 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3446 * m88k-dis.c (m88kdis): comment change. Remove space after
3448 (printop): handle new arg types DEC and XREG for m88110.
3450 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3452 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3453 type for absolute branch addresses. Delete special
3454 "ble" and "be" code in 'W' operand code.
3456 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3458 * mips-opc.c: Set hazard information correctly for branch
3459 likely instructions.
3461 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3463 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3464 info->fprintf_func for printing and info->print_address_func for
3467 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3469 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3471 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3473 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3474 Corrected second case of "b" for disassembler.
3476 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3478 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3479 to BFD swapping routines to correspond to BFD name changes.
3481 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3483 * mips-opc.c: Change div machine instruction to be z,s,t rather
3484 than s,t. Change div macro to be d,v,t rather than d,s,t.
3485 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3486 rem and remu which generates only the corresponding div
3487 instruction. This is for compatibility with the MIPS assembler,
3488 which only generates the simple machine instruction when an
3489 explicit destination of $0 is used.
3490 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3492 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3494 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3495 WR_31 hazard for bal, bgezal, bltzal.
3497 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3499 * hppa-dis.c (print_insn_hppa): Use print function
3500 from within the disassemble_info, not fprintf_filtered.
3502 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3504 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3505 Law, law@cs.utah.edu.)
3507 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3509 * mips-opc.c ("absu"): Removed.
3512 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3514 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3515 Changed hazard information to distinguish between memory load
3516 delays and coprocessor load delays.
3518 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3520 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3522 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3524 * configure.in: Don't pass cpu to config.bfd.
3526 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3528 * m88k-dis.c (m88kdis): Make class unsigned.
3530 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3532 * alpha-dis.c (print_insn_alpha): One branch format case was
3533 missing the instruction name.
3535 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3537 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3538 Add the arch-specific auxiliary files.
3539 (OFILES): Remove the arch-specific auxiliary files
3540 and use BFD_MACHINES instead of DIS_LIBS.
3541 * configure.in: Set BFD_MACHINES based on --with-targets option.
3543 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3545 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3548 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3550 * sparc-opc.c: Change CONST to const to deal with gcc
3551 -Dconst=__const -traditional.
3553 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3555 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3556 coprocessor instructions out of #if 0, and made them use new
3559 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3561 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3563 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3565 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3566 instruction, for use by the disassembler.
3568 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3569 hand-coded sign extensions that depended on 32-bit host ints.
3570 FIXME, we still depend on big-endian host bitfield ordering.
3571 (sparc_print_insn): Set the insn_info_valid field, and the
3572 other fields that describe the instruction being printed.
3574 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3576 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3577 `jmp' instead of just one of them.
3579 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3581 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3582 (fput_fp_reg_r): Renamed from fput_reg_r.
3583 (fput_fp_reg): New function.
3584 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3586 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3588 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3590 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3592 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3594 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3595 don't output a space.
3597 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3599 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3601 * mips-opc.c: New file, containing opcode table from
3602 ../include/opcode/mips.h.
3603 * Makefile.in: Add it.
3605 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3607 * m88k-dis.c: New file, moved in from gdb and changed to use the
3608 new dis-asm.h disassembler interface.
3609 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3610 (m88k-dis.o): New target.
3612 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3614 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3615 argument string const char * to correspond to opcode/mips.h.
3617 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3619 * mips-dis.c: Updated to account for name changes in new version
3621 * Makefile.in: Added header file dependencies.
3623 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3625 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3627 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3629 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3630 extend, rather than shifts.
3632 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3634 * Makefile.in: Undo 15 June change.
3636 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3638 * m68k-dis.c (print_insn_arg): Change return value to byte count
3640 * m68k-dis.c: Re-write to detect invalid operands before
3641 printing anything, so we can handle this the same way we
3642 handle invalid opcodes.
3644 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3646 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3648 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3650 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3653 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3655 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3657 * configure.in: Do make sysdep.h link.
3658 * Makefile.in: Search ../include. Don't search ../bfd.
3660 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3662 Changes from Jeff Law, law@cs.utah.edu:
3663 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3664 Do not print a space before the completers specified by
3667 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3669 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3670 defined, since gdb has been fixed.
3672 Changes from Jeff Law, law@cs.utah.edu:
3673 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3674 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3675 be a *disassemble_info, not a *FILE.
3676 * hppa-dis.c: Support 'd', '!', and 'a'.
3677 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3678 * hppa-dis.c: Delete cases which are no longer needed.
3680 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3682 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3684 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3686 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3689 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3691 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3692 * configure.in: No longer need to configure to get sysdep.h.
3694 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3696 * Patches from Jeffrey Law <law@cs.utah.edu>.
3697 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3698 templates for 1.1 FP computational instructions.
3700 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3702 * h8500-dis.c (print_insn_h8500): Address argument is type
3704 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3707 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3708 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3710 * sparc-dis.c (compare_opcodes): Move static declaration to
3713 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3715 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3716 instruction, remove unimp hack from 'l' argument.
3718 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3720 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3723 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3725 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3726 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3729 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3731 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3732 arrays of string pointers to 2-d arrays of chars, to save
3735 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3737 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3738 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3740 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3742 * hppa-dis.c: New file from Utah, adapted to new disassembler
3744 * Makefile.in: Include it.
3746 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3748 * sh-dis.c, sh-opc.h: New files.
3750 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3752 * alpha-dis.c, alpha-opc.h: New files.
3754 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3756 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3759 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3761 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3763 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3765 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3768 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3770 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3771 and double percent signs a few places.
3773 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3775 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3776 Use info->print_address_func not print_address.
3778 * dis-buf.c (generic_print_address): New function.
3780 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3782 * Makefile.in: Add sparc-dis.c.
3783 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3785 Add `add' instruction to the set that get checked
3786 for a preceding `sethi' in order to print an absolute address.
3787 * (print_insn): Disassembly prefers real instructions.
3788 (is_delayed_branch): Speed up.
3789 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3790 Still missing some float ops, and needs testing.
3791 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3792 F_ALIAS. Use printf, not fprintf, when not passing a file
3794 (compare_opcodes): Check that identical instructions have
3795 identical opcodes, complain otherwise.
3798 * Include reg_names.
3800 Use dis-asm.h/read_memory_func interface.
3802 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3804 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3805 deliberately return non-zero to setjmp from longjmp. Otherwise
3806 this code fails to compile.
3808 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3810 * m68k-dis.c: Fix prototype for fetch_arg().
3812 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3814 * dis-buf.c: New file, for new read_memory_func interface.
3815 Makefile.in (OFILES): Include it.
3816 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3817 Use new read_memory_func interface.
3819 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3821 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3822 * h8500-opc.h: Fix couple of opcodes.
3824 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3826 * Makefile.in: add dvi & installcheck targets
3828 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3830 * Makefile.in: Update for h8500-dis.c.
3832 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3834 * h8500-dis.c, h8500-opc.h: New files
3836 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3838 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3839 ../include/dis-asm.h.
3840 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3841 and ../gdb/m68k-pinsn.c).
3842 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3843 and ../gdb/i386-pinsn.c).
3844 * m68881-ext.c: New file. Moved definition of
3845 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3846 * Makefile.in: Adjust for new files.
3847 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3848 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3849 can be dis-assembled.
3851 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3853 * mips-dis.c (print_insn_arg): Now returns void.
3855 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3857 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3858 files that use the macros.
3860 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3862 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3863 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3864 (CFILES): Added mips-dis.c.
3866 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3868 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3869 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3871 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3873 * Makefile.in: Improve *clean rules.
3874 * configure.in: Allow a default host.
3876 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3878 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3879 files include other sysdep files
3881 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3883 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3885 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3887 * configure.in: For host support, use ../bfd/configure.host
3888 so it stays in sync with the ../bfd/hosts database.
3890 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3892 * configure.in: use cpu-vendor-os triple instead of nested cases
3894 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3896 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3897 *always* the wrong one.
3899 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3901 * z8kgen.c: added copyright info
3903 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3905 * z8k-dis.c (unparse_instr): prettier tabs
3906 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3908 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3910 * configure.in: Add ncr* configuration.
3911 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3912 picayune ANSI compilers happy.
3914 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3916 * configure.in (i386): Make i386 and i486 synonymous for now.
3917 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3919 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3921 * Makefile.in (install): Fix typo.
3923 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3925 * Makefile.in (make): Remove obsolete crud.
3926 (sparc-opc.o): Avoid Sun Make VPATH bug.
3928 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3930 * Makefile.in: since there are no SUBDIRS, remove rule and
3931 references of subdir_do.
3933 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3935 * Makefile.in (install): Get the library name right here too.
3936 Don't install bfd.h, since it's unrelated to this library. No
3937 subdirs to recurse into, either.
3938 (CFILES): The source file has a .c suffix, not .o.
3940 * sparc-opc.c: New file, moved from BFD.
3941 * Makefile.in (OFILES): Build it.
3943 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3945 * z8k-dis.c: fixed forward refferences of some declarations.
3947 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3949 * Makefile.in: get the name of the library right
3951 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3953 * z8k-dis.c: knows how to disassemble z8k stuff
3954 * z8k-opc.h: new file full of z8000 opcodes
3958 version-control: never