1 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3 * configure.in: Call AC_PROG_CC before configure.host.
6 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
8 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
10 * i386-dis.c (onebyte_has_modrm): New static array.
11 (twobyte_has_modrm): New static array.
12 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
14 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
16 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
19 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
21 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
24 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
26 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
27 m68010up, not just m68020up | cpu32.
29 * Makefile.in (SONAME): New variable.
30 ($(SHLINK)): Make a link to the transformed name, as well.
31 (stamp-tshlink): New target.
32 (install): Skip stamp-tshlink during install.
34 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
36 * configure.in: Call AC_ARG_PROGRAM.
38 * Makefile.in (program_transform_name): New variable.
39 (install): Transform library name before installing it.
41 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
43 * i960-dis.c (mem): Add HX dcinva instruction.
44 (reg): Add HX instructions.
46 The HX instructions are the XL instructions, so this just involves
47 arranges for them to not be sanitized.
50 Support for building as a shared library, based on patches from
51 Alan Modra <alan@spri.levels.unisa.edu.au>:
52 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
53 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
54 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
56 * Makefile.in (ALLLIBS): New variable.
57 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
58 (COMMON_SHLIB, SHLINK): New variables.
59 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
60 (STAGESTUFF): Remove variable.
61 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
62 (stamp-piclist, piclist): New targets.
63 ($(SHLIB), $(SHLINK)): New targets.
64 ($(OFILES)): Depend upon stamp-picdir.
65 (disassemble.o): Build twice if PICFLAG is set.
66 (MOSTLYCLEAN): Add pic/*.o.
67 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
68 (distclean): Remove pic and stamp-picdir.
69 (install): Install shared libraries.
70 (stamp-picdir): New target.
72 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
74 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
75 Print unknown instruction as "unknown", rather than in hex.
77 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
79 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
81 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
83 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
85 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
87 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
88 when necessary. From Ulrich Drepper
89 <drepper@myware.rz.uni-karlsruhe.de>.
91 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
93 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
94 sparc_num_opcodes. Update architecture enum values.
95 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
96 (sparc_opcode_lookup_arch): New function.
97 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
98 (sparc_opcodes): Add v9a shutdown insn.
100 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
102 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
103 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
105 (print_insn_sparc64): Deleted.
106 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
109 * sparc-opc.c (architecture_pname): Add v9a.
111 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
113 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
114 incorrectly defined as 0x16 when it should be 0x15.
115 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
116 (alpha_insn_set): added cvtst and cvttq float ops. Also added
117 excb (exception barrier) which is defined in the Alpha
118 Architecture Handbook version 2.
119 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
120 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
121 disassembled as or, for example.
123 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
125 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
126 (_print_insn_mips): Change i from int to unsigned int.
128 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
130 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
131 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
133 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
135 * i386-dis.c: Added Pentium Pro instructions.
137 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
139 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
142 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
144 * sh-opc.h (sh_nibble_type): Added REG_B.
145 (sh_arg_type): Added A_REG_B.
146 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
148 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
150 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
152 * disassemble.c (disassembler): Use new bfd_big_endian macro.
154 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
156 * Makefile.in (distclean): Remove stamp-h. From Ronald
157 F. Guilmette <rfg@monkeys.com>.
159 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
161 From David Mosberger-Tang <davidm@azstarnet.com>:
162 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
165 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
167 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
168 (sh_table): Added many SH3 opcodes.
169 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
171 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
173 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
174 (subco,subco.): Mark this PPC, not PPCCOM.
176 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
178 * configure: Rebuild with autoconf 2.7.
180 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
182 * configure: Rebuild with autoconf 2.6.
184 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
186 * configure.in: Sort list of architectures. Accept but do nothing
187 for alliant, convex, pyramid, romp, and tahoe.
189 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
191 * a29k-dis.c (print_special): Change num to unsigned int.
193 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
195 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
198 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
200 * configure.in: Call AC_CHECK_PROG to find and cache AR.
201 * configure: Rebuilt.
203 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
205 * configure.in: Add case for bfd_i860_arch.
206 * configure: Rebuild.
208 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
210 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
211 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
212 (NEXTDOUBLE): Likewise.
213 (print_insn_m68k): Don't match fmoveml if there is more than one
214 register in the list.
215 (print_insn_arg): Handle a place of '8' for a type of 'L'.
217 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
219 * m68k-opc.c: Use #W rather than #w.
220 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
222 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
224 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
225 and likewise for all the dbxx opcodes.
227 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
229 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
231 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
233 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
234 the VR4100 specific instructions to the mips_opcodes structure.
236 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
238 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
239 ugly Metrowerks bug in CW6, is fixed in CW7.
241 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
243 * ppc-opc.c (whole file): Add flags for common/any support.
245 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
247 * Makefile.in (BISON): Remove macro.
248 (FLAGS_TO_PASS): Remove BISON.
250 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
252 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
254 * m68k-dis.c (print_insn_m68k): Recognize all two-word
255 instructions that take no args by looking at the match mask.
256 (print_insn_arg): Always print "%" before register names.
257 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
258 [case '_']: Don't print "@#" before address.
259 [case 'J']: Use "%s" as format string, not register name.
260 [case 'B']: Treat place == 'C' like 'l' and 'L'.
262 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
264 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
267 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
269 From David Mosberger-Tang <davidm@azstarnet.com>
271 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
272 (alpha_insn_set): added definitions for VAX floating point
273 instructions (Unix compilers don't generate these, but handcoded
274 assembly might still use them).
276 * alpha-dis.c (print_insn_alpha): added support for disassembling
277 the miscellaneous instructions in the Alpha instruction set.
279 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
281 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
282 no longer create sysdep.h, sed ppc-opc.c to work around a
283 serious Metrowerks C bug.
284 * mpw-make.in: Remove.
285 * mpw-make.sed: New file, used by mpw-configure to edit
286 Makefile.in into an MPW makefile.
288 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
290 * Makefile.in (maintainer-clean): New synonym for realclean.
292 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
294 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
295 which use '0', '1', and '2' instead. Specify the proper size for
296 a pmove immediate operand. Correct the pmovefd patterns to be
297 moves to a register, not from a register.
298 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
300 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
302 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
303 %psr, %wim, %tbr as F_NOTV9.
305 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
307 * Makefile.in (Makefile): Just rebuild Makefile when running
309 (config.h, stamp-h): New targets.
310 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
311 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
313 * configure: Rebuild.
315 * mips-opc.c: Change unaligned loads and stores with "t,A"
316 operands to use "t,A(b)".
318 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
320 * sh-dis.c (print_insn_shx): Add F_FR0 support.
322 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
324 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
325 until 3 instead of until 2.
327 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
329 * Makefile.in (ALL_CFLAGS): Define.
330 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
331 (MOSTLYCLEAN): Add config.log.
332 (distclean): Don't remove config.log.
333 * configure.in: Substitute HDEFINES.
334 * configure: Rebuild.
336 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
338 * sh-opc.h (sh_arg_type): Add F_FR0.
339 (sh_table, case fmac): Add F_FR0 as first argument.
341 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
343 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
345 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
347 * sparc-dis.c: Remove all references to NO_V9.
349 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
351 * aclocal.m4: Just include ../bfd/aclocal.m4.
352 * configure: Rebuild.
354 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
356 * sparc-dis.c (X_DISP19): Define.
357 (print_insn, case 'G'): Use it.
358 (print_insn, case 'L'): Sign extend displacement.
360 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
362 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
363 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
364 host_makefile_frag or frags.
365 * aclocal.m4: New file.
366 * configure: Rebuild.
367 * Makefile.in (INSTALL): Set to @INSTALL@.
368 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
369 (INSTALL_DATA): Set to @INSTALL_DATA@.
371 (AR_FLAGS): Set to rc rather than qc.
372 (CC): Define as @CC@.
373 (CFLAGS): Set to @CFLAGS@.
374 (@host_makefile_frag@): Remove.
375 (config.status): Remove dependency upon @frags@.
377 * configure.in: ../bfd/config.bfd now just sets shell variables.
378 Use them rather than looking through target Makefile fragments.
379 * configure: Rebuild.
381 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
383 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
385 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
387 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
388 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
391 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
392 (lookup_{name,value}): New functions.
393 (prefetch_table): New static local.
394 (sparc_{encode,decode}_prefetch): New functions.
395 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
397 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
399 * sh-opc.h: Add blank lines to improve readabililty of sh3e
402 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
404 * sh-dis.c: Correct comment on first line of file.
406 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
408 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
410 * sparc-opc.c (asi, membar): New static locals.
411 (sparc_{encode,decode}_{asi,membar}): New functions.
412 (sparc_opcodes, membar insn): Fix.
413 * sparc-dis.c (print_insn): Call sparc_decode_asi.
414 Support decoding of membar masks.
417 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
419 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
421 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
423 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
424 and likewise for the other branches. Add bhs as an alias for bcc,
425 and likewise for the size variants. Add dbhs as an alias for
428 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
430 * sh-opc.h (FP sts instructions): Update to match reality.
432 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
434 * m68k-dis.c: (fpcr_names): Add % before all register names.
435 (reg_names): Likewise.
436 (print_insn_arg): Don't explicitly print % before register names.
437 Add % before register names in static array names. In case 'r',
438 print data registers as `@(Dn)', not `Dn@'. When printing a
439 memory address, don't print @# before it.
440 (print_indexed): Change base_disp and outer_disp from int to
441 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
442 syntax. Sign extend 8 byte displacement correctly.
443 (print_base): Print using MIT syntax. Print zpc when appropriate.
444 Change parameter disp from int to bfd_vma.
446 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
449 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
451 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
452 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
453 * sh-opc.h (sh_arg_type): Add new operand types.
454 (sh_table): Add new opcodes from SH3E Floating Point ISA.
456 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
458 * Makefile.in (distclean): Remove generated file config.h.
460 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
462 * Makefile.in (distclean): Remove generated file config.h.
464 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
466 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
468 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
470 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
471 rather than numopcodes. Use m68k_opcodes rather than removed
472 opcode function. Don't check F_ALIAS.
473 (print_insn_arg): Change first parameter to be const char *.
474 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
475 (m68k-opc.o): New target.
476 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
477 * configure: Rebuild.
479 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
481 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
482 (opcode_bits, opcode_hash_table): New variables.
483 (opcodes_initialized): Renamed from opcodes_sorted.
484 (build_hash_table): New function.
485 (is_delayed_branch): Use hash table.
486 (print_insn): Renamed from print_insn_sparc, made static.
487 Build and use hash table. If !sparc64, ignore sparc64 insns,
488 and vice-versa if sparc64.
489 (print_insn_sparc, print_insn_sparc64): New functions.
490 (compare_opcodes): Move sparc64 opcodes to end.
491 Print commutative insns with constant second.
492 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
494 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
496 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
497 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
498 avoids printing a delay slot in a delay slot.
499 * sh-opc.h (sh_table): Fully bracket last entry.
501 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
503 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
505 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
507 * configure.in: Get host_makefile_frag from ${srcdir}.
509 * configure.in: Autoconfiscated. Check for string[s].h. Create
510 config.h from config.in. Don't set up sysdep.h link.
511 * sysdep.h: New file.
512 * configure, config.in: New files, generated from configure.in.
513 * Makefile.in: Updated to be processed autoconf-style.
514 (distclean): Keep sysdep.h. Remove config.log and config.cache.
515 (Makefile): Depend on config.status.
516 (config.status): New rule.
517 * configure.bat: Update Makefile substitutions.
519 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
521 * mips-opc.c (L1): Define.
522 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
523 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
526 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
528 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
529 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
530 have multiple add units but only a single logical unit.
532 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
533 shifted by 18, without any insertion or extraction function.
534 (insert_cr, extract_cr): Remove.
537 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
539 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
542 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
544 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
547 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
549 * mpw-config.in: Add sh and i386 configs, remove sparc config.
550 * sh-opc.h: Add copyright.
552 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
554 * Makefile.in (crunch-m68k): Delete extra target accidentally
555 checked in a while ago.
557 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
559 * sh-opc.h (sh_table): Add SH3 support.
561 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
563 * sh-opc.h: Added bsrf and braf.
565 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
567 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
568 bogus [ls]fm{ea,fd} patterns.
570 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
571 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
572 initialize it from memory. Make function static.
573 (print_insn_{big,little}_arm): New functions.
574 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
575 the correct endianness.
578 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
580 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
581 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
584 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
586 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
589 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
591 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
592 17th, so that it builds again using GCC as the compiler.
594 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
596 * mips-dis.c (print_insn_little_mips): Cast return value from
597 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
598 expects an unsigned long, and that might be fewer words of
599 argument storage (e.g., if bfd_vma is long long on a 32-bit
601 (print_insn_big_mips): Likewise with bfd_getb32 value.
602 (_print_insn_mips): Now static.
604 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
606 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
607 gcc memory hog problem with initializer is fixed.
610 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
612 * arc-opc.c (NULL): Define.
613 (arc_operands, insn fields u,s): Delete.
614 (arc_operands, insn fields a,b,c): Mark as signed.
615 (arc_opcodes): No longer const, links computed at run-time.
616 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
617 suffixes that affect the insn code.
618 (arc_opcodes): Resort table to macros are first.
619 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
620 (arc_opcodes, st [b] entry): Likewise.
621 (arc_opcodes, st [b,d] entry): Fix mask, value.
622 (arc_reg_names): Add entries for r29, r30, r31, r60.
623 (opcode_map, icode_map): New static globals.
624 (arc_opcode_init_tables): Initialize them.
625 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
626 (insert_shimmoffset): Signal error if register present.
628 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
631 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
633 Merge in support for Mac MPW as a host.
634 (Old change descriptions retained for informational value.)
636 * mpw-config.in (archname): Compute from the config.
637 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
639 * mpw-config.in (target_arch): Compute from canonical target.
640 (m68k, mips, powerpc, sparc): Add architectures.
641 * mpw-make.in (disassemble.c.o): Add.
642 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
644 * mpw-config.in (BFD_MACHINES): Set to a default value.
645 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
647 * mpw-make.in (CSEARCH): Add extra-include to search path.
649 * mpw-config.in (varargs.h): Don't create.
650 (sysdep.h): Create using forward-include.
651 * mpw-make.in (CSEARCH): Add include/mpw to search path.
653 * mpw-config.in: New file, MPW version of configure.in.
654 * mpw-make.in: New file, MPW version of Makefile.in.
657 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
659 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
660 Call arc_get_opcode_mach to map bfd mach number to opcode value.
661 (print_insn_*): Pass bfd mach number, not opcode version.
662 * arc-opc.c (arc_get_opcode_mach): New function.
665 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
667 * alpha-dis.c (print_insn_alpha): Put empty statement after
670 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
672 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
673 (low_sign_extend): Likewise.
674 (get_field): Delete unused function.
675 (set_field, deposit_14, deposit_21): Likewise.
677 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
679 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
682 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
684 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
686 * alpha-opc.h (OSF_ASMCODE): define
687 print pal-code names as defined in App C of the
688 Alpha Architecture Reference Manual
690 * alpha-dis.c: cleaned up output
691 print stylized code forms as defined in App A.4.3 of the
692 Alpha Architecture Reference Manual
694 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
696 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
698 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
701 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
703 * m68k-dis.c (opcode): New function. Returns address of opcode
704 table entry given index, even if the opcode table was split to
705 work around gcc bugs.
706 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
708 (BREAK_UP_BIG_DECL): Make secondary array static and const.
709 (reg_names): Now const.
710 (print_insn_arg): Arrays cacheFieldName and names now const.
711 (print_indexed): Array scales now const.
714 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
716 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
717 (print_insn_arc_{host,graphics,audio}): Likewise.
718 (print_insn): Add prototype.
719 (arc_get_disassembler): New arg `big_p'. Return little or big
720 print fn accordingly.
721 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
722 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
723 (arc_opval_supported): Likewise.
724 * disassemble.c (disassembler): Pass big endian flag to
725 arc_get_disassembler.
728 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
730 * ppc-opc.c: Sort recently added instructions by minor opcode
731 number within major opcode number.
733 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
735 * hppa-dis.c: Include libhppa.h.
737 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
739 * mips-opc.c: Change dli to use M_DLI, and add dla.
741 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
743 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
746 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
748 * arc-dis.c (arc_get_disassembler): Change argument to int,
749 one of bfd_mach_arc_xxx. All callers updated.
752 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
754 * mips-opc.c: Add r4650 mul instruction.
756 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
758 * mips-opc.c: Add uld and usd macros for unaligned double load and
761 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
763 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
764 mfdcr, mtdcr, icbt, iccci.
767 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
769 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
770 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
771 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
772 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
773 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
774 (insert_absaddr): New function.
776 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
778 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
779 New argument `cpu', pass it to arc_opcode_init_tables.
780 Document byte order dependencies. Ignore unsupported insns.
781 (arc_get_disassembler): New function.
782 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
783 print_insn_arc_audio): New functions.
784 * arc-opc.c (MULTSHIFT operand): Delete.
785 (UNSIGNED, SATURATION): New operands.
786 (mac, mul, mul64, mulu64): New insns.
787 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
788 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
789 (host,graphics,audio extended and auxiliary regs): Define.
790 (ss, sc, mh, ml): New suffixes.
791 (arc_opcode_supported, arc_opval_supported): New functions.
792 (insert_multshift, extract_multshift): Deleted.
793 * disassemble.c (disassembler, case bfd_arch_arc): Call
794 arc_get_disassembler to get disassembler routine.
797 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
799 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
800 signed char fields to shorts, more portable.
802 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
804 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
805 char fields as signed chars, since they may have negative values.
807 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
809 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
810 (mycroft@netbsd.org).
812 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
814 From "Logg, Ed" <elogg@ea.com>:
815 * ppc-opc.c (extract_bdm): Correct parenthezisation.
816 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
819 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
821 * ppc-opc.c: Changes based on patch from David Edelsohn
822 <edelsohn@mhpcc.edu>.
823 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
826 (insert_tbr): New static function.
827 (extract_tbr): New static function.
828 (XFXFXM_MASK, XFXM): Define.
829 (XSPRBAT_MASK, XSPRG_MASK): Define.
830 (powerpc_opcodes): Add instructions to access special registers by
831 name. Add mtcr and mftbu.
833 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
835 * mips-opc.c (P3): Define.
836 (mips_opcodes): Add mad and madu.
838 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
840 * configure.in: Add W65 support.
841 * disassemble.c: Likewise.
842 * w65-opc.h, w65-dis.c: New files.
844 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
846 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
850 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
852 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
854 * arc-opc.c (extract_reladdr): New function.
855 (insert_reladdr): Store address right-shifted by 2.
858 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
860 * mips-opc.c: Add dli as a synonym for li.
863 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
865 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
867 (extraction fns): Insn argument now array of two words. Return pointer
868 to value's table entry. All uses changed.
869 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
870 (insert_multshift, extract_multshift): New fns.
871 (arc_operands): Add support for cache bypass suffix. Add support for
872 predefined aux regs. Modifier bits moved to flags field.
873 (arc_opcodes): Likewise.
874 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
875 New insn rlc. Update to syntax in programmer's manual.
876 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
877 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
879 (arc_opcode_init_tables): New argument to indicate cpu type.
880 (insert_reg): Handle predefined aux regs.
881 (extract_reg): Likewise.
882 (lookup_register): New fn.
883 * arc-dis.c (arc_condition_codes): Deleted.
884 (print_insn_arc): Handle insns with 32 bit immediate constants better.
885 Clean up modifier handling. Handle predefined aux regs.
888 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
890 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
891 print something for reserved opcode values, even if it won't
894 * mips-dis.c (_print_insn_mips): When initializing, shift right
895 and mask, to avoid sign extension problems on the Alpha.
897 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
901 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
903 * configure.in: Add ARC support.
904 * disassemble.c: Likewise.
905 * arc-dis.c, arc-opc.c: New files.
908 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
910 * sh-opc.h (mov.l gbr): Get direction right.
911 * sh-dis.c (print_insn_shx): New function.
912 (print_insn_shl, print_insn_sh): Call print_insn_shx to
913 print opcodes with right byte order.
915 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
917 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
918 to avoid conflicts with getopt.
920 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
922 * hppa-dis.c (print_insn_hppa): Read the instruction using
923 bfd_getb32, so that it works on a little endian or 64 bit host.
924 Remove unused local variable op.
926 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
928 * mips-opc.c: Use or instead of addu for pseudo-op move, since
929 addu does not work correctly if -mips3.
931 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
933 * a29k-dis.c (print_special): Add special register names defined
934 on 29030, 29040 and 29050.
935 (print_insn): Handle new operand type 'I'.
937 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
939 * Makefile.in (INSTALL): Use top level install.sh script.
941 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
943 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
944 that it works on a little endian host.
946 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
948 * configure.in: Use ${config_shell} when running config.bfd.
950 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
952 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
954 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
956 * a29k-dis.c (print_insn): Print the opcode.
958 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
960 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
962 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
964 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
966 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
968 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
969 which store a value into memory.
971 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
973 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
974 * arm-dis.c, arm-opc.h: New files.
976 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
978 * Makefile.in (ns32k-dis.o): Add dependency.
979 * ns32k-dis.c (print_insn_arg): Declare initialized local as
980 string, not as array of chars.
982 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
984 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
986 * sparc-opc.c: Added sparclite extended FP operations, and
987 versions of v9 impdep* instructions permitting specification of
990 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
992 * i960-dis.c (reg_names): Now const.
993 (struct sparse_tabent): New type, copied from array type in mem
995 (ctrl): Local static array ctrl_tab now const.
996 (cobr): Local static array cobr_tab now const.
997 (mem): Local variables reg1, reg2, reg3 now point to const. Local
998 static variable mem_tab no longer explicitly initialized. Changed
999 mem_init to const array of struct sparse_tabent.
1000 (reg): Local static variable reg_tab no longer explicitly
1001 initialized. Changed reg_init to const array of struct
1003 (ea): Local static array scale_tab now const.
1005 start-sanitize-i960xl
1006 * i960-dis.c (reg): Added i960XL instructions to reg_init table.
1010 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1012 * configure.bat: the disassember needs to be enabled for
1013 "objdump -d" to work in djgpp.
1015 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1017 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1018 (invalid_float): Enabled general version, doesn't require running
1019 on ns32k host. Changed to take char* argument, and test for
1020 explicitly specified sizes, instead of using sizeof() on host CPU
1022 (INVALID_FLOAT): Cast first argument.
1023 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1024 list_P032, list_M032): Now const.
1025 (optlist, list_search): Made appropriate arguments now point to
1027 (print_insn_arg): Changed static array of one-character-string
1028 pointers into a static const array of characters; fixed sprintf
1029 statement accordingly.
1031 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1033 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1034 from distribution. A ns32k-dis.c from a previous distribution has
1035 been brought up to date and supports the new interface.
1037 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1039 * configure.in: add bfd_ns32k_arch target support.
1041 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1042 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1044 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1046 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1049 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1051 * h8300-dis.c, mips-dis.c: Don't use true and false.
1053 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1055 * configure.in: Change --with-targets to --enable-targets.
1057 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1059 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1060 opcodes to the first instruction with that opcode, to speed
1061 disassembly of large files. From ralphc@pyramid.com (Ralph
1064 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1066 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1068 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1070 * configure.bat: update to latest makefile.in
1072 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1074 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1075 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1076 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1077 slot insn is in a delay slot.
1078 * z8k-opc.h: (resflg): Fix patterns.
1079 * h8500-opc.h Fix CR insn patterns.
1081 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1083 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1084 "cmpl" before POWER versions, so that gas -many uses them.
1086 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1088 * disassemble.c: New file.
1089 * Makefile.in (OFILES): Add disassemble.o.
1090 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1091 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1092 binutils/configure.in.
1094 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1095 opcode being examined.
1097 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1099 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1100 (insert_ral, insert_ram, insert_ras): New functions.
1101 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1102 RAS for store with update.
1104 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1106 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1107 (edelsohn@npac.syr.edu).
1109 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1111 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1114 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1116 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1118 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1120 * ppc-opc.c (powerpc_operands): The signedp field has been
1121 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1122 instead. Add new operand SISIGNOPT.
1123 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1124 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1125 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1128 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1130 * i386-dis.c (struct private): Renamed to dis_private. `private'
1131 is a reserved word for dynix cc.
1133 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1135 * configure.in: Change error message to refer to bfd/config.bfd
1136 rather than bfd/configure.in.
1138 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1140 * ppc-opc.c: Define POWER2 as short alias flag.
1141 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1144 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1146 * i960-dis.c (print_insn_i960): Don't read a second word for
1147 opcodes 0, 1, 2 and 3.
1149 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1151 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1153 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1155 * m68881-ext.c: Removed; no longer used.
1156 * Makefile.in: Changed accordingly.
1158 * m68k-dis.c (ext_format_68881): Don't declare.
1159 (print_insn_m68k): If an instruction uses place 'i', it uses at
1160 least four fixed bytes.
1161 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1162 extended float, convert to double using floatformat_to_double, not
1163 ieee_extended_to_double, and fetch the data before converting it.
1165 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1167 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1168 davidj@ICSI.Berkeley.EDU (David Johnson).
1170 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1172 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1173 PowerPC uses bdnz[l][a].
1175 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1177 * dis-buf.c, i386-dis.c: Include sysdep.h.
1179 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1181 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1183 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1184 by Motorola PowerPC 601 with PPC_OPCODE_601.
1185 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1186 Disassemble Motorola PowerPC 601 instructions as well as normal
1187 PowerPC instructions.
1189 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1191 * i960-dis.c (reg, mem): Just use a static array instead of
1194 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1196 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1197 condition name index if this is for a negated condition.
1199 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1200 Floating point format for 'H' operand is backwards from normal
1201 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1202 operands (fmpyadd and fmpysub), handle bizarre register
1203 translation correctly for single precision format.
1205 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1206 or 'I' operands if the next format specifier is 'M' (fcmp
1207 condition completer).
1209 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1211 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1212 single number giving a bitmask for the MB and ME fields of an M
1213 form instruction. Change NB to accept 32, and turn it into 0;
1214 also turn 0 into 32 when disassembling. Seperated SH from NB.
1215 (insert_mbe, extract_mbe): New functions.
1216 (insert_nb, extract_nb): New functions.
1217 (SC_MASK): Mask out SA and LK bits.
1218 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1219 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1220 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1221 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1222 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1223 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1224 (powerpc_macros): Define table of macro definitions.
1225 (powerpc_num_macros): Define.
1227 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1228 if PPC_OPERAND_NEXT is set.
1230 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1232 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1233 char. Retrieve contents using bfd_getl32 instead of shifting.
1235 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1237 * ppc-opc.c: New file. Opcode table for PowerPC, including
1238 opcodes for POWER (RS/6000).
1239 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1240 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1241 (CFILES): Add ppc-dis.c.
1242 (ppc-dis.o, ppc-opc.o): New targets.
1243 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1245 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1247 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1248 No space before 'u', 'f', or 'N'.
1250 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1252 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1253 farther than we should.
1255 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1257 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1259 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1261 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1263 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1264 needs it, to prevent reading past the end of a section.
1266 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1268 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1269 Removed t,A case for la; always use t,A(b) case.
1271 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1273 From Ted Lemen <mellon@pepper.ncd.com>
1274 * mips-dis.c (print_insn_arg): Handle 'k'.
1275 * mips-opc.c: Make cache use k, not t.
1277 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1279 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1280 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1281 FLOAT_FORMAT_CODE to put out floating point register names.
1283 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1285 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1287 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1289 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1291 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1293 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1294 larger than 32. Moved dsxx32 variants first for disassembler.
1296 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1298 * z8kgen.c, z8k-opc.h: Add full lda information.
1300 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1302 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1303 movb instructions. Any necessary space will be emitted by
1304 the code to handle nullification completers.
1306 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1308 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1310 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1312 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1313 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1315 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1317 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1319 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1321 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1322 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1324 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1326 * m88k-dis.c (m88kdis): comment change. Remove space after
1328 (printop): handle new arg types DEC and XREG for m88110.
1330 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1332 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1333 type for absolute branch addresses. Delete special
1334 "ble" and "be" code in 'W' operand code.
1336 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1338 * mips-opc.c: Set hazard information correctly for branch
1339 likely instructions.
1341 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1343 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1344 info->fprintf_func for printing and info->print_address_func for
1347 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1349 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1351 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1353 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1354 Corrected second case of "b" for disassembler.
1356 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1358 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1359 to BFD swapping routines to correspond to BFD name changes.
1361 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1363 * mips-opc.c: Change div machine instruction to be z,s,t rather
1364 than s,t. Change div macro to be d,v,t rather than d,s,t.
1365 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1366 rem and remu which generates only the corresponding div
1367 instruction. This is for compatibility with the MIPS assembler,
1368 which only generates the simple machine instruction when an
1369 explicit destination of $0 is used.
1370 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1372 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1374 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1375 WR_31 hazard for bal, bgezal, bltzal.
1377 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1379 * hppa-dis.c (print_insn_hppa): Use print function
1380 from within the disassemble_info, not fprintf_filtered.
1382 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1384 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1385 Law, law@cs.utah.edu.)
1387 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1389 * mips-opc.c ("absu"): Removed.
1392 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1394 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1395 Changed hazard information to distinguish between memory load
1396 delays and coprocessor load delays.
1398 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1400 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1402 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1404 * configure.in: Don't pass cpu to config.bfd.
1406 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1408 * m88k-dis.c (m88kdis): Make class unsigned.
1410 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1412 * alpha-dis.c (print_insn_alpha): One branch format case was
1413 missing the instruction name.
1415 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1417 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1418 Add the arch-specific auxiliary files.
1419 (OFILES): Remove the arch-specific auxiliary files
1420 and use BFD_MACHINES instead of DIS_LIBS.
1421 * configure.in: Set BFD_MACHINES based on --with-targets option.
1423 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1425 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1428 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1430 * sparc-opc.c: Change CONST to const to deal with gcc
1431 -Dconst=__const -traditional.
1433 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1435 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1436 coprocessor instructions out of #if 0, and made them use new
1439 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1441 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1443 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1445 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1446 instruction, for use by the disassembler.
1448 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1449 hand-coded sign extensions that depended on 32-bit host ints.
1450 FIXME, we still depend on big-endian host bitfield ordering.
1451 (sparc_print_insn): Set the insn_info_valid field, and the
1452 other fields that describe the instruction being printed.
1454 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1456 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1457 `jmp' instead of just one of them.
1459 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1461 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1462 (fput_fp_reg_r): Renamed from fput_reg_r.
1463 (fput_fp_reg): New function.
1464 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1466 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1468 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1470 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1472 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1474 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1475 don't output a space.
1477 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1479 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1481 * mips-opc.c: New file, containing opcode table from
1482 ../include/opcode/mips.h.
1483 * Makefile.in: Add it.
1485 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1487 * m88k-dis.c: New file, moved in from gdb and changed to use the
1488 new dis-asm.h disassembler interface.
1489 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1490 (m88k-dis.o): New target.
1492 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1494 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1495 argument string const char * to correspond to opcode/mips.h.
1497 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1499 * mips-dis.c: Updated to account for name changes in new version
1501 * Makefile.in: Added header file dependencies.
1503 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1505 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1507 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1509 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1510 extend, rather than shifts.
1512 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1514 * Makefile.in: Undo 15 June change.
1516 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1518 * m68k-dis.c (print_insn_arg): Change return value to byte count
1520 * m68k-dis.c: Re-write to detect invalid operands before
1521 printing anything, so we can handle this the same way we
1522 handle invalid opcodes.
1524 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1526 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1528 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1530 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1533 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1535 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1537 * configure.in: Do make sysdep.h link.
1538 * Makefile.in: Search ../include. Don't search ../bfd.
1540 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1542 Changes from Jeff Law, law@cs.utah.edu:
1543 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1544 Do not print a space before the completers specified by
1547 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1549 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1550 defined, since gdb has been fixed.
1552 Changes from Jeff Law, law@cs.utah.edu:
1553 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1554 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1555 be a *disassemble_info, not a *FILE.
1556 * hppa-dis.c: Support 'd', '!', and 'a'.
1557 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1558 * hppa-dis.c: Delete cases which are no longer needed.
1560 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1562 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1564 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1566 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1569 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1571 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1572 * configure.in: No longer need to configure to get sysdep.h.
1574 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1576 * Patches from Jeffrey Law <law@cs.utah.edu>.
1577 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1578 templates for 1.1 FP computational instructions.
1580 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1582 * h8500-dis.c (print_insn_h8500): Address argument is type
1584 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1587 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1588 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1590 * sparc-dis.c (compare_opcodes): Move static declaration to
1593 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1595 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1596 instruction, remove unimp hack from 'l' argument.
1598 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1600 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1603 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1605 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1606 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1609 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1611 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1612 arrays of string pointers to 2-d arrays of chars, to save
1615 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1617 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1618 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1620 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1622 * hppa-dis.c: New file from Utah, adapted to new disassembler
1624 * Makefile.in: Include it.
1626 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1628 * sh-dis.c, sh-opc.h: New files.
1630 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1632 * alpha-dis.c, alpha-opc.h: New files.
1634 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1636 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1639 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1641 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1643 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1645 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1648 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1650 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1651 and double percent signs a few places.
1653 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1655 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1656 Use info->print_address_func not print_address.
1658 * dis-buf.c (generic_print_address): New function.
1660 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1662 * Makefile.in: Add sparc-dis.c.
1663 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1665 Add `add' instruction to the set that get checked
1666 for a preceding `sethi' in order to print an absolute address.
1667 * (print_insn): Disassembly prefers real instructions.
1668 (is_delayed_branch): Speed up.
1669 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1670 Still missing some float ops, and needs testing.
1671 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1672 F_ALIAS. Use printf, not fprintf, when not passing a file
1674 (compare_opcodes): Check that identical instructions have
1675 identical opcodes, complain otherwise.
1678 * Include reg_names.
1680 Use dis-asm.h/read_memory_func interface.
1682 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1684 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1685 deliberately return non-zero to setjmp from longjmp. Otherwise
1686 this code fails to compile.
1688 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1690 * m68k-dis.c: Fix prototype for fetch_arg().
1692 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1694 * dis-buf.c: New file, for new read_memory_func interface.
1695 Makefile.in (OFILES): Include it.
1696 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1697 Use new read_memory_func interface.
1699 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1701 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1702 * h8500-opc.h: Fix couple of opcodes.
1704 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1706 * Makefile.in: add dvi & installcheck targets
1708 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1710 * Makefile.in: Update for h8500-dis.c.
1712 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1714 * h8500-dis.c, h8500-opc.h: New files
1716 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
1718 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
1719 ../include/dis-asm.h.
1720 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
1721 and ../gdb/m68k-pinsn.c).
1722 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
1723 and ../gdb/i386-pinsn.c).
1724 * m68881-ext.c: New file. Moved definition of
1725 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1726 * Makefile.in: Adjust for new files.
1727 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
1728 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
1729 can be dis-assembled.
1731 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1733 * mips-dis.c (print_insn_arg): Now returns void.
1735 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
1737 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
1738 files that use the macros.
1740 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1742 * mips-dis.c: New file, from gdb/mips-pinsn.c.
1743 * Makefile.in (DIS_LIBS): Added mips-dis.o.
1744 (CFILES): Added mips-dis.c.
1746 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1748 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1749 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1751 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1753 * Makefile.in: Improve *clean rules.
1754 * configure.in: Allow a default host.
1756 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1758 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1759 files include other sysdep files
1761 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1763 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1765 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
1767 * configure.in: For host support, use ../bfd/configure.host
1768 so it stays in sync with the ../bfd/hosts database.
1770 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1772 * configure.in: use cpu-vendor-os triple instead of nested cases
1774 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
1776 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1777 *always* the wrong one.
1779 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1781 * z8kgen.c: added copyright info
1783 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1785 * z8k-dis.c (unparse_instr): prettier tabs
1786 * z8kgen.c -> z8k-opc.h: bug fixes in tables
1788 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
1790 * configure.in: Add ncr* configuration.
1791 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
1792 picayune ANSI compilers happy.
1794 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
1796 * configure.in (i386): Make i386 and i486 synonymous for now.
1797 * configure.in (i[34]86-*-sysv4): Add my_host definition.
1799 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1801 * Makefile.in (install): Fix typo.
1803 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
1805 * Makefile.in (make): Remove obsolete crud.
1806 (sparc-opc.o): Avoid Sun Make VPATH bug.
1808 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
1810 * Makefile.in: since there are no SUBDIRS, remove rule and
1811 references of subdir_do.
1813 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1815 * Makefile.in (install): Get the library name right here too.
1816 Don't install bfd.h, since it's unrelated to this library. No
1817 subdirs to recurse into, either.
1818 (CFILES): The source file has a .c suffix, not .o.
1820 * sparc-opc.c: New file, moved from BFD.
1821 * Makefile.in (OFILES): Build it.
1823 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
1825 * z8k-dis.c: fixed forward refferences of some declarations.
1827 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
1829 * Makefile.in: get the name of the library right
1831 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1833 * z8k-dis.c: knows how to disassemble z8k stuff
1834 * z8k-opc.h: new file full of z8000 opcodes
1838 version-control: never