opcodes/ChangeLog

   1 start-sanitize-tic80
   2 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
   3
   4         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
   5         PC relative offset forms before the 15 bit forms.  An assembler command
   6         line option now chooses the default.
   7
   8 end-sanitize-tic80
   9 start-sanitize-r5900
  10 Tue Dec 16 13:24:22 1997  Jeffrey A Law  (law@cygnus.com)
  11
  12         * mips-opc.c: Add many missing r5900 instructions.
  13
  14 end-sanitize-r5900
  15 start-sanitize-r5900
  16 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
  17
  18         * d30v-opc.c (d30v_opcode_table): Set new flags bits
  19         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
  20
  21 end-sanitize-r5900
  22 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
  23
  24         * configure: Only build libopcodes shared if --enable-shared's value
  25         was `yes', or was set to `*opcodes*'.
  26         * aclocal.m4: Likewise.
  27         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
  28         original source of this bit of code.  It's not clear what the best fix
  29         would be, though.
  30
  31 start-sanitize-r5900
  32 Mon Dec 15 12:43:36 1997  Jeffrey A Law  (law@cygnus.com)
  33
  34         * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
  35 end-sanitize-r5900
  36 start-sanitize-tic80
  37 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
  38
  39         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
  40         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
  41         offset forms before the 15 bit forms, to default to the long forms.
  42
  43 end-sanitize-tic80
  44 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
  45
  46         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
  47
  48 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
  49
  50         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
  51         symbol if none is present.
  52         (print_insn_big_arm):  Prevent examination of stored symbol if
  53         none is present.
  54
  55 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
  56
  57         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
  58
  59 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
  60
  61         * disassemble.c: Remove disasm_symaddr() function.
  62
  63         * arm-dis.c: Use info->symbol instead of info->flags to determine
  64         if disassmbly should be in Thumb or Arm mode.
  65
  66 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
  67
  68         * arm-dis.c: Add support for disassembling Thumb opcodes.
  69         (print_insn_thumb): New function.
  70
  71         * disassemble.c (disasm_symaddr): New function.
  72
  73         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
  74         (thumb_opcodes): Table of Thumb opcodes.
  75
  76 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
  77
  78         * m68k-opc.c (btst): Change Dd@s to Dd;b.
  79
  80         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
  81         and 'v' as operand types.
  82
  83 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
  84
  85         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
  86         <olivier.carmona@di.epfl.ch>.
  87         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
  88         which has a two word opcode with a one word argument.
  89
  90 start-sanitize-d30v
  91 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
  92
  93         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
  94         unsigned, not signed.
  95         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
  96
  97 end-sanitize-d30v
  98 start-sanitize-sh4
  99 Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>
 100
 101         * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
 102         * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
 103         (ftrv): Slay the cut-and-paste monster.
 104
 105 end-sanitize-sh4
 106 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
 107
 108         * d10v-dis.c (print_operand):
 109         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
 110
 111 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
 112
 113         * d10v-opc.c (OPERAND_FLAG): Split into:
 114         (OPERAND_FFLAG, OPERAND_CFLAG) .
 115         (FSRC): Split into:
 116         (FFSRC, CFSRC).
 117
 118 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
 119
 120         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
 121         field for all INSN_MACRO's.
 122         * mips16-opc.c: same
 123
 124 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
 125
 126         * mips-opc.c (sync,cache): These are 3900 insns.
 127
 128 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 129
 130         sh-opc.h (sh_table): Remove ftst/nan.
 131
 132 start-sanitize-vr5400
 133 Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>
 134
 135         * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
 136         (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
 137         last.
 138         * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
 139
 140 end-sanitize-vr5400
 141 start-sanitize-tx49
 142 Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>
 143
 144         * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
 145         Add tx49 insns and configury.
 146
 147 end-sanitize-tx49
 148 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
 149
 150         * mips-opc.c (ffc, ffs): Fix mask.
 151
 152 start-sanitize-d30v
 153 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
 154
 155         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
 156         control registers.
 157
 158 end-sanitize-d30v
 159 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 160
 161         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 162 start-sanitize-vr5400
 163         Added VR5400 instructions.
 164         (N5): New cpu-id macro.
 165 end-sanitize-vr5400
 166         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 167
 168 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 169
 170         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 171         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 172
 173 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
 174
 175         * v850-dis.c (disassemble): Replace // with /* ... */
 176
 177 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
 178
 179         * sparc-opc.c: Add wr & rd for v9a asr's.
 180         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
 181         (v9a_asr_reg_names): New variable.
 182         Patch from David Miller <davem@vger.rutgers.edu>.
 183
 184 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
 185
 186         * sparc-opc.c (v9notv9a): New insn type.
 187         (IMPDEP): Move to the end to not conflict with edge8 et al.
 188         Patch from David Miller <davem@vger.rutgers.edu>.
 189
 190 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
 191
 192         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
 193
 194 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
 195
 196         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
 197
 198 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
 199
 200         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
 201         of disassemble_info structure to determine if an overlay address
 202         has a matching symbol in low memory.
 203
 204         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
 205         new symbol_at_address_func field in disassemble_info structure.
 206
 207 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
 208
 209         * v850-opc.c (extract_d22): Use signed arithmatic.
 210
 211 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
 212
 213         * mips-opc.c: Three op mult is not an ISA insn.
 214
 215 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
 216
 217         * mips-opc.c: Fix formatting.
 218
 219 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
 220
 221         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
 222         than assuming that char is signed.  Explicitly sign extend 16 bit
 223         values, rather than assuming that short is 16 bits.
 224         (OP_sI, OP_J, OP_DIR): Likewise.
 225
 226 start-sanitize-v850e
 227 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
 228
 229         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
 230         system registers.
 231
 232 end-sanitize-v850e
 233 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
 234
 235         * v850-opc.c: Fix typo in comment.
 236
 237         * v850-dis.c (disassemble): Add test of processor type when
 238         determining opcodes.
 239
 240 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 241
 242         * configure.in: Use a diversion to set enable_shared before the
 243         arguments are parsed.
 244         * configure: Rebuild.
 245
 246 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 247
 248         * m68k-opc.c (TBL1): Use ! rather than `.
 249         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
 250
 251 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
 252
 253         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
 254
 255         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
 256
 257         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
 258         for mcf5200.
 259
 260         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
 261         * aclocal.m4: Rebuild with new libtool.
 262         * configure: Rebuild.
 263
 264 start-sanitize-v850e
 265 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 266
 267         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
 268
 269 end-sanitize-v850e
 270 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
 271
 272         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
 273
 274 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
 275
 276         * v850-opc.c (v850_opcodes): Further rearrangements.
 277
 278 start-sanitize-d30v
 279 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
 280
 281         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
 282
 283 end-sanitize-d30v
 284 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
 285
 286         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
 287         parser to work.
 288
 289 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
 290
 291         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
 292 start-sanitize-tx19
 293         * mips16-opc.c: Added mips16 sdbbp.
 294 end-sanitize-tx19
 295
 296 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
 297
 298         * v850-opc.c: Initialise processors field of v850_opcode structure.
 299
 300 start-sanitize-d30v
 301 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
 302
 303         Merge changes from Martin Hunt:
 304
 305         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
 306
 307         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
 308         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
 309         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
 310
 311         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
 312
 313         * d30v-dis.c (print_insn): First operand of d*i (delayed
 314         branch) instructions is relative.
 315
 316         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
 317         (d30v_operand_table): Add IMM6S3 type.
 318         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
 319
 320         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
 321         and cmp instructions.
 322
 323         * d30v-opc.c: Correct entries for repeat*, and sat*.
 324         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
 325         types. Correct several formats.
 326
 327         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
 328
 329         * d30v-opc.c (pre_defined_registers): Change control registers.
 330
 331         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
 332         SHORT_C2.  Manual was incorrect.
 333
 334         * d30v-dis.c (lookup_opcode):  Return value now indicates
 335         if an opcode has a short and a long form.  Used for deciding
 336         to append a ".s" or ".l".
 337         (print_insn): Append a ".s" to an instruction if it is
 338         the short form and ".l" if it is a long form. Do not append
 339         anything if the instruction has only one possible size.
 340
 341         * d30v-opc.c: Change mulx2h to require an even register.
 342         New form: SHORT_A2; a SHORT_A form that needs an even
 343         register as the first operand.
 344
 345         * d30v-dis.c (print_insn_d30v): Fix problem where the last
 346         instruction was not being disassembled if there were an odd
 347         number of instructions.
 348
 349         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
 350
 351 end-sanitize-d30v
 352 start-sanitize-v850e
 353 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
 354
 355         * v850-dis.c (disassemble): Improved display of register lists.
 356
 357 end-sanitize-v850e
 358 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
 359
 360         * sparc-opc.c (sparc_opcodes): Fix assembler args to
 361         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
 362         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
 363         fandnot1s, fandnot2s.
 364
 365 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
 366
 367         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
 368
 369 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
 370
 371         * cgen-asm.c (cgen_parse_address): New argument resultp.
 372         All callers updated.
 373         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
 374
 375 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
 376
 377         * mn10200-dis.c (disassemble): PC relative instructions are
 378         relative to the next instruction, not the current instruction.
 379
 380 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
 381
 382         * v850-dis.c (disassemble): Only signed extend values that are not
 383         returned by extract functions.
 384         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
 385
 386 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
 387
 388         * v850-opc.c: Update comments.  Remove use of
 389         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
 390
 391 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
 392
 393         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
 394
 395 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
 396
 397         * configure: Rebuilt with latest devo autoconf for NT support.
 398
 399 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
 400
 401         * v850-dis.c (disassemble): Use curly brace syntax for register
 402         lists.
 403
 404         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
 405         where r0 is being used as a destination register.
 406
 407 start-sanitize-v850e
 408 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
 409
 410         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
 411 end-sanitize-v850e
 412
 413 start-sanitize-sh4
 414 Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 415
 416         * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
 417         (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
 418         (sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
 419         Add insns to access SGR and DBR.
 420         * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
 421
 422 end-sanitize-sh4
 423 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
 424
 425         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
 426
 427 start-sanitize-v850e
 428 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
 429
 430         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
 431         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
 432         opcodes..
 433
 434 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 435
 436         * configure (cgen_files): Add support for v850e target.
 437         * configure.in (cgen_files):  Add support for v850e target.
 438
 439 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 440
 441         * configure (cgen_files): Add support for v850ea target.
 442         * configure.in (cgen_files):  Add support for v850ea target.
 443 end-sanitize-v850e
 444
 445 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
 446
 447         * configure.in (bfd_arc_arch): Add.
 448         * configure: Rebuild.
 449         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
 450         * Makefile.in: Rebuild.
 451         * arc-dis.c, arc-opc.c: New files.
 452         * disassemble.c (ARCH_all): Define ARCH_arc.
 453         (disassembler): Add ARC support.
 454
 455 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
 456
 457 start-sanitize-v850e
 458         * v850-dis.c (disassemble): Add support for v850EA instructions.
 459
 460         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
 461         (v850_opcodes): Add v850EA instructions.
 462
 463         * v850-dis.c (disassemble): Add support for v850E instructions.
 464
 465         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
 466         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
 467         insert_spe, extract_spe): New Functions.
 468         (v850_opcodes): Add v850E instructions.
 469 end-sanitize-v850e
 470
 471         * v850-opc.c: Reorganised and re-layed out to improve readability
 472         and portability.
 473
 474 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
 475
 476         * configure: Rebuild with autoconf 2.12.1.
 477
 478 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 479
 480         * aclocal.m4, configure: Rebuild with new automake patches.
 481
 482 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
 483
 484         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
 485         * acinclude.m4: Just include acinclude.m4 from BFD.
 486         * aclocal.m4, configure: Rebuild.
 487
 488 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
 489
 490         * Makefile.am: New file, based on old Makefile.in.
 491         * acconfig.h: New file.
 492         * acinclude.m4: New file.
 493         * stamp-h.in: New file.
 494         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
 495         Removed shared library handling; now handled by libtool.  Replace
 496         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
 497         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
 498         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
 499         handling in AC_OUTPUT.
 500         * dep-in.sed: Change .o to .lo.
 501         * Makefile.in: Now built with automake.
 502         * aclocal.m4: Now built with aclocal.
 503         * config.in, configure: Rebuild.
 504
 505 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
 506
 507         * mips-opc.c: Fix typo/thinko in "eret" instruction.
 508
 509 start-sanitize-r5900
 510 Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 511
 512         * mips-opc.c: Fix coding of mtsa.
 513
 514 end-sanitize-r5900
 515 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
 516
 517         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
 518         Make array const.
 519         * sparc-dis.c (sorted_opcodes): New static local.
 520         (struct opcode_hash): `opcode' is pointer to const element.
 521         (build_hash): First arg is now table of sorted pointers.
 522         (print_insn_sparc): Sort opcodes by sorting table of pointers.
 523         (compare_opcodes): Update.
 524
 525 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
 526
 527         * cgen-opc.c: #include <ctype.h>.
 528         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
 529         Handle case insensitive hashing.
 530         (hash_keyword_value): Change type of `value' to unsigned int.
 531
 532 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
 533
 534         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
 535         precision FP, mark it as such.  Likewise for double precision
 536         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
 537         possible.
 538 start-sanitize-r5900
 539         (mips_builtin_opcodes): Remove non-existant r5900 instructions
 540 end-sanitize-r5900
 541
 542 start-sanitize-r5900
 543 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
 544
 545         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
 546         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
 547
 548 end-sanitize-r5900
 549 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
 550
 551         * ppc-opc.c (extract_nsi): make unsigned expression signed before
 552         negating it.
 553         (UNUSED): remove one level of parens, so MSVC doesn't choke on
 554         nesting depth when all the macros are expanded.
 555
 556 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
 557
 558         * sparc-opc.c: The fcmp v9a instructions take an integer register
 559         as a destination, not a floating point register.  From Christian
 560         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
 561
 562 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
 563
 564         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
 565         syntax.  From Roman Hodek
 566         <rnhodek@faui22c.informatik.uni-erlangen.de>.
 567
 568         * i386-dis.c (twobyte_has_modrm): Fix pand.
 569
 570 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
 571
 572         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
 573
 574 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
 575
 576         * arm-dis.c: Add prototypes for arm_decode_shift and
 577         print_insn_arm.
 578
 579 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
 580
 581         * mips-opc.c: Add r3900 insns.
 582
 583 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
 584
 585         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
 586         print delay slot instructions on the same line.  When using a PC
 587         relative load, add a comment with the value being loaded if it can
 588         be obtained.
 589
 590 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
 591
 592         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
 593         to pushS/popS for segment regs and byte constant so that
 594         pushw/popw printed when in 16 bit data mode.
 595
 596         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
 597         print cbtw, cwtd in 16 bit data mode.
 598         * i386-dis.c (putop): extra case W to support above.
 599
 600         * i386-dis.c (print_insn_x86): print addr32 prefix when given
 601         address size prefix in 16 bit address mode.
 602
 603 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
 604
 605         * sh-dis.c: Reindent.  Rename local variable fprintf to
 606         fprintf_fn.
 607
 608 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
 609
 610         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
 611
 612 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
 613
 614         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
 615           field membership.
 616         * mips16-opc.c (mip16_opcodes): same.
 617
 618 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
 619
 620         * m68k-opc.c (moveb): Change $d to %d.
 621
 622 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
 623
 624         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
 625         (twobyte_has_modrm): Likewise.
 626         (grps): Likewise.
 627         (OP_MMX, OP_EM, OP_MS): New static functions.
 628
 629         * i386-dis.c: Revert patch of April 4.  The output now matches
 630         what gcc generates.
 631
 632 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
 633
 634         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
 635         of $simm16.
 636
 637 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
 638
 639         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
 640
 641 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
 642
 643         * Makefile.in (install): Depend upon installdirs.
 644         (installdirs): New target.
 645
 646 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
 647
 648         From Thomas Graichen <graichen@rzpd.de>:
 649         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
 650         * configure: Rebuild.
 651
 652 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
 653
 654         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
 655         Delete string{,s}.h support.
 656
 657 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
 658
 659         * cgen-asm.c (cgen_parse_operand_fn): New global.
 660         (cgen_parse_{{,un}signed_integer,address}): Update call to
 661         cgen_parse_operand_fn.
 662         (cgen_init_parse_operand): New function.
 663         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
 664         from cgen_asm_init_parse.
 665         (m32r_cgen_assemble_insn): New operand `errmsg'.
 666         Delete call to as_bad, return error message to caller.
 667         (m32r_cgen_asm_hash_keywords): #if 0 out.
 668
 669 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 670
 671         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
 672         not data register.
 673         [case 'J']: Fix typo in register name.
 674
 675 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
 676
 677         * configure.in: Substitute SHLIB_LIBS.
 678         * configure: Rebuild.
 679         * Makefile.in (SHLIB_LIBS): New variable.
 680         ($(SHLIB)): Use $(SHLIB_LIBS).
 681
 682 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
 683
 684         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
 685
 686         * cgen-opc.c (hash_keyword_name): Improve algorithm.
 687
 688         * disassemble.c (disassembler): Handle m32r.
 689
 690 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
 691
 692         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
 693         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
 694         * Makefile.in (CFILES): Add them.
 695         (ALL_MACHINES): Add them.
 696         (dependencies): Regenerate.
 697         * configure.in (cgen_files): New variable.
 698         (bfd_m32r_arch): Add entry.
 699         * configure: Regenerate.
 700
 701 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 702
 703         * configure.in: Correct file names for bfd_mn10[23]00_arch.
 704         * configure: Rebuild.
 705
 706         * Makefile.in: Rebuild dependencies.
 707
 708         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
 709
 710         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
 711         fdivp.
 712
 713 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
 714
 715         * Branched binutils 2.8.
 716
 717 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
 718
 719         * m10200-dis.c: Rename from mn10200-dis.c.
 720         * m10200-opc.c: Rename from mn10200-opc.c.
 721         * m10300-dis.c: Rename from mn10300-dis.c
 722         * m10300-opc.c: Rename from mn10300-opc.c.
 723         * Makefile.in: Update accordingly.
 724
 725         * mips16-opc.c: Add mul and dmul macros.
 726
 727 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
 728
 729         * makefile.vms: Update CFLAGS, add clean target.
 730
 731 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
 732
 733         * mips-opc.c: Add "wait".  From Ralf Baechle
 734         <ralf@gnu.ai.mit.edu>.
 735
 736         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
 737         * configure, config.in: Rebuild.
 738         * sysdep.h: Include <stdlib.h> if it exists.
 739         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
 740         <string.h>.
 741         * Makefile.in: Rebuild dependencies.
 742
 743 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 744
 745         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
 746         Andrew Bray <andy@madhouse.demon.co.uk>.
 747
 748         * mips-opc.c: Add cast when setting mips_opcodes.
 749
 750 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
 751
 752         * v850-dis.c (disassemble):  Fix sign extension problem.
 753         * v850-opc.c (extract_d*):  Fix sign extension problems to make
 754         disassembly calculate branch offsets correctly.
 755
 756 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
 757
 758         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
 759
 760         * mips-opc.c: Add dctr and dctw.
 761
 762 start-sanitize-d30v
 763 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 764
 765         * d30v-dis.c (print_insn): Change the way signed constants
 766         are displayed.
 767 end-sanitize-d30v
 768 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
 769
 770         * Makefile.in (BFD_H): New variable.
 771         (HFILES): New variable.
 772         (CFILES): Add all C files.
 773         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
 774         Delete old dependencies, and build new ones.
 775         * dep-in.sed: New file.
 776
 777 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 778
 779         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
 780
 781 start-sanitize-coldfire
 782 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
 783
 784         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
 785         instructions.
 786
 787 end-sanitize-coldfire
 788 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
 789
 790         * mn10200-opc.c: Change "trap" to "syscall".
 791         * mn10300-opc.c: Add new "syscall" instruction.
 792
 793 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
 794
 795         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
 796         mulul insns on the coldfire.
 797
 798 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
 799
 800         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
 801         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
 802         (print_insn_little_arm): Likewise.
 803
 804 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 805
 806         Based on patches from H.J. Lu <hjl@lucon.org>:
 807         * i386-dis.c (fetch_data): Add prototype.
 808         * m68k-dis.c (fetch_data): Add prototype.
 809         (dummy_print_address): Add prototype.  Make static.
 810         * ppc-opc.c (valid_bo): Add prototype.
 811         * sparc-dis.c (build_hash_table): Add prototype.
 812         (is_delayed_branch, compute_arch_mask): Add prototypes.
 813         (print_insn_sparc): Make several local variables const.
 814         (compare_opcodes): Change arguments to const PTR.  Add prototype.
 815         * sparc-opc.c (arg): Change name field to be const.
 816         (lookup_name, lookup_value): Add prototypes.  Change table and
 817         name parameters to be const.
 818         (sparc_encode_asi): Change name parameter to be const.
 819         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
 820         (sparc_encode_sparclet_cpreg): Likewise.
 821         (sparc_decode_asi): Change return type to be const.
 822         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
 823         (sparc_decode_sparclet_cpreg): Likewise.
 824
 825 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
 826
 827         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
 828         Solaris doesn't like the combined options, and the -f is
 829         unnecessary.
 830         (stamp-tshlink, install): Likewise.
 831
 832 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
 833
 834         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
 835         as relaxable.
 836
 837 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
 838
 839         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
 840
 841 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
 842
 843         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
 844         the mc68000.
 845
 846 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 847
 848         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
 849
 850 start-sanitize-tic80
 851 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
 852
 853         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
 854
 855 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
 856
 857         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
 858
 859 end-sanitize-tic80
 860 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 861
 862         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
 863         floatformat_to_double to make portable.
 864         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
 865         precision float.
 866
 867 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
 868
 869         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
 870         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
 871
 872 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 873
 874         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
 875         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
 876
 877 start-sanitize-tic80
 878 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
 879
 880         * tic80-opc.c (LSI_SCALED): Renamed from this ...
 881         (OFF_SL_BR_SCALED): ... to this, and added the flag
 882         TIC80_OPERAND_BASEREL to the flags word.
 883         (tic80_opcodes): Replace all occurances of LSI_SCALED with
 884         OFF_SL_BR_SCALED.
 885
 886 end-sanitize-tic80
 887 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
 888
 889         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
 890         Change mips_opcodes from const array to a pointer,
 891         and change bfd_mips_num_opcodes from const int to int,
 892         so that we can increase the size of the mips opcodes table
 893         dynamically.
 894
 895 start-sanitize-tic80
 896 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
 897
 898         * tic80-opc.c (tic80_predefined_symbols): Revert change to
 899         store BITNUM values in the table in one's complement form
 900         to match behavior when assembler is given a raw numeric
 901         value for a BITNUM operand.
 902         * tic80-dis.c (print_operand_bitnum): Ditto.
 903
 904 end-sanitize-tic80
 905 start-sanitize-d30v
 906 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 907
 908         * d30v-opc.c: Removed references to FLAG_X.
 909
 910 end-sanitize-d30v
 911 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 912
 913         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
 914
 915 start-sanitize-d30v
 916 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 917
 918         * Makefile.in: Added d30v object files.
 919         * configure: (bfd_d30v_arch) Rebuilt.
 920         * configure.in: (bfd_d30v_arch) Added new case.
 921         * d30v-dis.c: New file.
 922         * d30v-opc.c: New file.
 923         * disassemble.c (disassembler) Add entry for d30v.
 924
 925 end-sanitize-d30v
 926 start-sanitize-tic80
 927 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
 928
 929         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
 930         representations for the floating point BITNUM values.
 931
 932 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
 933
 934         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
 935         in the table in one's complement form, as they appear in the
 936         actual instruction.
 937         (tic80_symbol_to_value): Use macros to access predefined
 938         symbol fields.
 939         (tic80_value_to_symbol): Ditto.
 940         (tic80_next_predefined_symbol): New function.
 941         * tic80-dis.c (print_operand_bitnum): Remove code that did
 942         one's complement for BITNUM values.
 943
 944 end-sanitize-tic80
 945 start-sanitize-r5900
 946 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
 947
 948         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
 949
 950 end-sanitize-r5900
 951 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
 952
 953         * makefile.vms: Remove 8 bit characters.  Update to latest
 954         gcc release.
 955
 956 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 957
 958         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
 959
 960 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
 961
 962         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
 963         (IMM24_PCREL): Likewise.
 964
 965 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 966
 967         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
 968         address for an extended PC relative instruction that is not a
 969         branch.
 970
 971 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 972
 973         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
 974         bytes_per_line.
 975
 976 start-sanitize-tic80
 977 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
 978
 979         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
 980         (tic80_opcodes): Sort entries so that long immediate forms
 981         come after short immediate forms, making it easier for
 982         assembler to select the right one for a given operand.
 983
 984 end-sanitize-tic80
 985 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
 986
 987         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
 988         display_endian.
 989         (print_insn_mips16): Likewise.
 990
 991 start-sanitize-r5900
 992 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
 993
 994         * mips-opc.c: add r5900.
 995
 996 end-sanitize-r5900
 997 start-sanitize-tic80
 998 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
 999
1000         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1001         a symbol class that restricts translation to just that
1002         class (general register, condition code, etc).
1003
1004 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
1005
1006         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1007         and REG_DEST_E for register operands that have to be
1008         an even numbered register.  Add REG_FPA for operands that
1009         are one of the floating point accumulator registers.
1010         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1011         (tic80_opcodes): Change entries that need even numbered
1012         register operands to use the new operand table entries.
1013         Add "or" entries that are identical to "or.tt" entries.
1014
1015 end-sanitize-tic80
1016 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
1017
1018         * mips16-opc.c: Add new cases of exit instruction for
1019         disassembler.
1020         * mips-dis.c (print_mips16_insn_arg): Display floating point
1021         registers in operands of exit instruction.  Print `$' before
1022         register names in operands of entry and exit instructions.
1023
1024 start-sanitize-tic80
1025 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
1026
1027         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1028         pairs for all predefined symbols recognized by the assembler.
1029         Also used by the disassembling routines.
1030         (tic80_symbol_to_value): New function.
1031         (tic80_value_to_symbol): New function.
1032         * tic80-dis.c (print_operand_control_register,
1033         print_operand_condition_code, print_operand_bitnum):
1034         Remove private tables and use tic80_value_to_symbol function.
1035
1036 end-sanitize-tic80
1037 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1038
1039         * d10v-dis.c (print_operand): Change address printing
1040         to correctly handle PC wrapping.  Fixes PR11490.
1041
1042 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
1043
1044         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1045         branches relaxable.
1046
1047 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
1048
1049         * mips-dis.c (print_insn_mips16): Set insn_info information.
1050         (print_mips16_insn_arg): Likewise.
1051
1052         * mips-dis.c (print_insn_mips16): Better handling of an extend
1053         opcode followed by an instruction which can not be extended.
1054
1055 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
1056
1057         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1058         coldfire moveb instruction to not allow an address register as
1059         destination.  Although the documentation does not indicate that
1060         this is invalid, experiments uncovered unexpected behavior.
1061         Added a comment explaining the situation.  Thanks to Andreas
1062         Schwab for pointing this out to me.
1063
1064 start-sanitize-tic80
1065 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
1066
1067         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1068         entries are presorted so that entries with the same mnemonic are
1069         adjacent to each other in the table.  Sort the entries for each
1070         instruction so that this is true.
1071
1072 end-sanitize-tic80
1073 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1074
1075         * m68k-dis.c: Include <libiberty.h>.
1076         (print_insn_m68k): Sort the opcode table on the most significant
1077         nibble of the opcode.
1078
1079 start-sanitize-tic80
1080 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
1081
1082         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1083         "vsub", "vst", "xnor", and "xor" instructions.
1084         (V_a1): Renamed from V_a, msb of accumulator reg number.
1085         (V_a0): Add macro, lsb of accumulator reg number.
1086
1087 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
1088
1089         * tic80-dis.c (print_insn_tic80): Broke excessively long
1090         function up into several smaller ones and arranged for
1091         the instruction printing function to be callable recursively
1092         to print vector instructions that have both a load and a
1093         math instruction packed into a single opcode.
1094         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1095         to explain why it comes after the other vector opcodes.
1096
1097 end-sanitize-tic80
1098 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
1099
1100         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1101         move insns to handle immediate operands.
1102
1103 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1104
1105         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1106         fix operand mask in the "moveml" entries for the coldfire.
1107
1108 start-sanitize-tic80
1109 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
1110
1111         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1112         New macros for building vector instruction opcodes.
1113         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1114         FMT_LI, which were unused.  The field is now a flags field.
1115         Remove some opcodes that are possible, but illegal, such
1116         as long immediate instructions with doubles for immediate
1117         values.  Add "vadd" and "vld" instructions.
1118
1119 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
1120
1121         * tic80-opc.c (tic80_operands): Reorder some table entries to make
1122         the order more logical.  Move the shift alias instructions ("rotl",
1123         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1124         interspersed with the regular sr.x and sl.x instructions.  Add
1125         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1126         "sub", "subu", "swcr", and "trap".
1127
1128 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
1129
1130         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1131         (OFF_SL_PC): Renamed from OFF_SL.
1132         (OFF_SS_BR): New operand type for base relative operand.
1133         (OFF_SL_BR): New operand type for base relative operand.
1134         (REG_BASE): New operand type for base register operand.
1135         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1136         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1137         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1138         instructions.
1139         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1140         10 char field, padded with spaces on rhs, rather than a string
1141         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
1142         than old TIC80_OPERAND_RELATIVE.  Add support for new
1143         TIC80_OPERAND_BASEREL flag bit.
1144
1145 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
1146
1147         * tic80-dis.c (print_insn_tic80): Print floating point operands
1148         as floats.
1149         * tic80-opc.c (SPFI): Add single precision floating point
1150         immediate operand type.
1151         (ROTATE): Add rotate operand type for shifts.
1152         (ENDMASK): Add for shifts.
1153         (n): Macro for the 'n' bit.
1154         (i): Macro for the 'i' bit.
1155         (PD): Macro for the 'PD' field.
1156         (P2): Macro for the 'P2' field.
1157         (P1): Macro for the 'P1' field.
1158         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1159         "fcmp", and "fdiv".
1160
1161 end-sanitize-tic80
1162 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
1163
1164         * mn10200-dis.c (disassemble): Mask off unwanted bits after
1165         adding in current address for pc-relative operands.
1166
1167 start-sanitize-tic80
1168 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
1169
1170         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1171         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1172         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1173         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1174         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1175         REG_BASE_M_SI, REG_BASE_M_LI respectively.
1176         (REG_SCALED, LSI_SCALED): New operand types.
1177         (E): New macro for 'E' bit at bit 27.
1178         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1179         opcodes, including the various size flavors (b,h,w,d) for
1180         the direct load and store instructions.
1181
1182 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
1183
1184         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1185         in an instruction.
1186         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1187         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1188         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1189         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1190         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1191         masks with "MASK_* & ~M_*" to get the M bit reset.
1192         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1193
1194 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
1195
1196         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1197         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
1198         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1199         form.
1200         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1201         CC, SICR, and LICR table entries.
1202         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1203         "bcnd", and "brcr" opcodes.
1204
1205 end-sanitize-tic80
1206 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
1207
1208         * ppc-opc.c (powerpc_operands): Make comment match the
1209         actual fields (no shift field).
1210         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1211 start-sanitize-tic80
1212         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1213         partial implementation, work in progress.
1214         * tic80-opc.c (tic80_operands): Begin construction operands table.
1215         (tic80_opcodes): Continue populating opcodes table and start
1216         filling in the operand indices.
1217         (tic80_num_opcodes): Add this.
1218 end-sanitize-tic80
1219
1220 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
1221
1222         * m68k-opc.c: Add #B case for moveq.
1223
1224 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
1225
1226         * mn10300-dis.c (disassemble): Make sure all variables are initialized
1227         before they are used.
1228
1229 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
1230
1231         * v850-opc.c (v850_opcodes): Put curly-braces around operands
1232         for "breakpoint" instruction.
1233
1234 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
1235
1236         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1237         (dep): Use ALL_CFLAGS rather than CFLAGS.
1238
1239 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1240
1241         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1242         flag.
1243
1244 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
1245
1246         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1247 start-sanitize-tic80
1248         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1249 end-sanitize-tic80
1250
1251 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1252
1253         * mips16-opc.c: Add "abs".
1254
1255 start-sanitize-tic80
1256 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
1257
1258         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1259         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1260         (disassembler): Add bfd_arch_tic80 support to set disassemble
1261         to print_insn_tic80.
1262         * tic80-dis.c (print_insn_tic80): Add stub.
1263
1264 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
1265
1266         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1267         * configure: Regenerate with autoconf.
1268         * tic80-dis.c: Add file.
1269         * tic80-opc.c: Add file.
1270
1271 end-sanitize-tic80
1272 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1273
1274         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
1275
1276 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
1277
1278         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1279         (mn10200_opcodes): Use it for some logicals and btst insns.
1280         Add "break" and "trap" instructions.
1281
1282         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1283
1284         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1285
1286 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1287
1288         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1289         relative load or add now depends upon whether the instruction is
1290         in a delay slot.
1291
1292 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
1293
1294         * mn10200-dis.c: Finish writing disassembler.
1295         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1296         Fix mask for "jmp (an)".
1297
1298         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1299         handle endianness issues for mn10300.
1300
1301         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1302
1303 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
1304
1305         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1306         instruction.  Fix opcode field for "movb (imm24),dn".
1307
1308         * mn10200-opc.c (mn10200_operands): Fix insertion position
1309         for DI operand.
1310
1311 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
1312
1313         * mn10200-opc.c: Create mn10200 opcode table.
1314         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
1315         but moving along nicely.
1316
1317 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1318
1319         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
1320
1321 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
1322
1323         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1324         specifiers for fmovem* instructions.
1325
1326 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1327
1328         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1329
1330 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
1331
1332         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1333         with dsrl.
1334
1335 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1336
1337         * mn10300-opc.c: Add some comments explaining the various
1338         operands and such.
1339
1340         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1341
1342 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1343
1344         * m68k-dis.c (print_insn_arg): Handle new < and > operand
1345         specifiers.
1346
1347         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1348         operand specifiers in fmovm* instructions.
1349
1350 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
1351
1352         * ppc-opc.c (insert_li): Give an error if the offset has the two
1353         least significant bits set.
1354
1355 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1356
1357         * mips-dis.c (print_insn_mips16): Separate the instruction from
1358         the arguments with a tab, not a space.
1359
1360 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
1361
1362         * mn10300-dis.c (disasemble): Finish conversion to '$' as
1363         register prefix.
1364
1365         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1366         mov am,(imm32,sp).
1367
1368 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
1369
1370         * configure: Rebuild with autoconf 2.12.
1371
1372         Add support for mips16 (16 bit MIPS implementation):
1373         * mips16-opc.c: New file.
1374         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1375         (mips16_reg_names): New static array.
1376         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1377         after seeing a 16 bit symbol.
1378         (print_insn_little_mips): Likewise.
1379         (print_insn_mips16): New static function.
1380         (print_mips16_insn_arg): New static function.
1381         * mips-opc.c: Add jalx instruction.
1382         * Makefile.in (mips16-opc.o): New target.
1383         * configure.in: Use mips16-opc.o for bfd_mips_arch.
1384         * configure: Rebuild.
1385
1386 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
1387
1388         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1389         operand specifiers in *save, *restore and movem* instructions.
1390
1391         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1392         the coldfire.
1393
1394         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1395         register operands for immediate arithmetic, not, neg, negx, and
1396         set according to condition instructions.
1397
1398         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1399         specifier of the effective-address operand in immediate forms of
1400         arithmetic instructions.  The specifier for the immediate operand
1401         notes how and where the constant will be stored.
1402
1403 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
1404
1405         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1406         opcode.
1407
1408         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1409         register prefix.
1410
1411         * mn10300-dis.c (disassemble): Prefix registers with '%'.
1412
1413 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
1414
1415         * mn10300-dis.c (disassemble): Handle register lists.
1416
1417         * mn10300-opc.c: Fix handling of register list operand for
1418         "call", "ret", and "rets" instructions.
1419
1420         * mn10300-dis.c (disassemble): Print PC-relative and memory
1421         addresses symbolically if possible.
1422         * mn10300-opc.c: Distinguish between absolute memory addresses,
1423         pc-relative offsets & random immediates.
1424
1425         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1426         in 7 byte insns.
1427         (disassemble): Handle SPLIT and EXTENDED operands.
1428
1429 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
1430
1431         * mn10300-dis.c: Rough cut at printing some operands.
1432
1433         * mn10300-dis.c: Start working on disassembler support.
1434         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1435
1436         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1437         list.
1438         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1439
1440 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1441
1442         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1443
1444 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
1445
1446         * mn10300-opc.c (mn10300_opcodes): Demand parens around
1447         register argument is calls and jmp instructions.
1448
1449 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
1450
1451         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1452         getx operand.  Fix opcode for mulqu imm,dn.
1453
1454 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
1455
1456         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1457         in MN10300_OPERAND_SPLIT operands for how many bits
1458         appear in the basic insn word.  Add IMM32_HIGH24,
1459         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1460         (mn10300_opcodes): Use new operands as needed.
1461
1462         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1463         for bset, bclr, btst instructions.
1464         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1465
1466         * mn10300-opc.c (mn10300_operands): Remove many redundant
1467         operands.  Update opcode table as appropriate.
1468         (IMM32): Add MN10300_OPERAND_SPLIT flag.
1469         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1470
1471 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
1472
1473         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1474         operands (for indexed load/stores).  Fix bitpos for DI
1475         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1476         few instructions that insert immediates/displacements in the
1477         middle of the instruction.  Add IMM8E for 8 bit immediate in
1478         the extended part of an instruction.
1479         (mn10300_operands): Use new opcodes as appropriate.
1480
1481 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1482
1483         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1484         sequential so the assembler never parallelizes it with
1485         other instructions.
1486
1487 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
1488
1489         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1490         a data/address register that appears in register field 0
1491         and register field 1.
1492         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1493
1494 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
1495
1496         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1497         standard disassembly.
1498
1499         * alpha-opc.c (alpha_operands): Rearrange flags slot.
1500         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1501         Recategorize PALcode instructions.
1502
1503 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
1504
1505         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1506
1507 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
1508
1509         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1510         there are no operand types.
1511
1512 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
1513
1514         * v850-opc.c (D9_RELAX): Renamed from D9, all references
1515         changed.
1516         (v850_operands): Make sure D22 immediately follows D9_RELAX.
1517
1518 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
1519
1520         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1521
1522 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
1523
1524         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1525         and sst.w instructions.
1526
1527         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1528         "bCC"instructions).
1529
1530 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1531
1532         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1533         and the arguments.
1534
1535 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
1536
1537         * ppc-opc.c (PPCPWR2): Define.
1538         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1539         it.
1540
1541 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
1542
1543         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1544         field for movhu instruction.
1545
1546         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1547         cast value to "long" not "signed long" to keep hpux10
1548         compiler quiet.
1549
1550 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
1551
1552         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1553         for mov (abs16),DN.
1554
1555         * mn10300-opc.c (FMT*): Remove definitions.
1556
1557         * mn10300-opc.c (mn10300_opcodes): Fix destination register
1558         for shift-by-register opcodes.
1559
1560         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1561         into [AD][MN][01] for encoding the position of the register
1562         in the opcode.
1563
1564 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
1565
1566         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1567         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1568
1569 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
1570
1571         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1572         Fix various typos.  Add "PAREN" operand.
1573         (MEM, MEM2): Define.
1574         (mn10300_opcodes): Surround all memory addresses with "PAREN"
1575         operands.  Fix several typos.
1576
1577         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1578         changes.
1579
1580 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
1581
1582         * mn10300-opc.c (FMT_XX): Renumber starting at one.
1583         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
1584         at this time.
1585         (mn10300_opcodes): Break opcode format out into its own field.
1586         Update many operand fields to deal with signed vs unsigned
1587         issues.  Fix one or two typos in the "mov" instruction
1588         opcode, mask and/or operand fields.
1589
1590 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1591
1592         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1593         m68851 wasn't reset.
1594
1595 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
1596
1597         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1598         all opcodes.  Very rough cut at operands for all opcodes.
1599
1600         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1601         opcode table.
1602
1603 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
1604
1605         * mn10200-opc.c, mn10300-opc.c: New files.
1606         * mn10200-dis.c, mn10300-dis.c: New files.
1607         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1608         * disassemble.c: Break mn10x00 support into 10200 and 10300
1609         support.
1610         * configure.in: Likewise.
1611         * configure: Rebuilt.
1612
1613 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1614
1615         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1616
1617 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
1618
1619         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1620         MN10x00 processors.
1621         * disassemble (ARCH_mn10x00): Define.
1622         (disassembler): Handle bfd_arch_mn10x00.
1623         * configure.in: Recognize bfd_mn10x00_arch.
1624         * configure: Rebuilt.
1625
1626 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
1627
1628         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
1629         accordingly.  Don't declare functions using op_rtn.
1630
1631 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
1632
1633         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
1634         params to be more standard.
1635         * (disassemble):  Print absolute addresses and symbolic names for
1636         branch and jump targets.
1637         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
1638         bit operands.
1639         * (v850_opcodes):  Add breakpoint insn.
1640
1641 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1642
1643         * m68k-opc.c: Move the fmovemx data register cases before the
1644         other cases, so that they get recognized before the data register
1645         does gets treated as a degenerate register list.
1646
1647 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1648
1649         * mips-opc.c: Add a case for "div" and "divu" with two registers
1650         and a destination of $0.
1651
1652 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
1653
1654         * mips-dis.c (print_insn_arg): Add prototype.
1655         (_print_insn_mips): Ditto.
1656
1657 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1658
1659         * mips-dis.c (print_insn_arg): Print condition code registers as
1660         $fccN.
1661
1662 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
1663
1664         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1665
1666 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
1667
1668         * v850-dis.c (disassemble): Make static.  Provide prototype.
1669
1670 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
1671
1672         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1673         in range checks.
1674
1675 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
1676
1677         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1678         ']' characters into the output stream.
1679         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1680         Add "memop" field to all opcodes (for the disassembler).
1681         Reorder opcodes so that "nop" comes before "mov" and "jr"
1682         comes before "jarl".
1683
1684         * v850-dis.c (print_insn_v850): Fix typo in last change.
1685
1686         * v850-dis.c (print_insn_v850): Properly handle disassembling
1687         a two byte insn at the end of a memory region when the memory
1688         region's size is only two byte aligned.
1689
1690         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1691
1692         * v850-dis.c (v850_reg_names): Define.
1693         (v850_sreg_names, v850_cc_names): Likewise.
1694         (disassemble): Very rough cut at printing operands (unformatted).
1695
1696         * v850-opc.c (BOP_MASK): Fix.
1697         (v850_opcodes): Fix mask for jarl and jr.
1698
1699         * v850-dis.c: New file.  Skeleton for disassembler support.
1700         * Makefile.in Remove v850 references, they're not needed here.
1701         * configure.in: Add v850-dis.o when building v850 toolchains.
1702         * configure: Rebuilt.
1703         * disassemble.c (disassembler): Call v850 disassembler.
1704
1705         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1706         (insert_d8_6, extract_d8_6): New functions.
1707         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1708         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1709         Add D8_6.
1710         (IF4A, IF4B): Use "D7" instead of "D7S".
1711         (IF4C, IF4D): Use "D8_7" instead of "D8".
1712         (IF4E, IF4F): New.  Use "D8_6".
1713         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
1714         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
1715
1716         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1717         (v850_operands): Change D16 to D16_15, use special insert/extract
1718         routines.  New new D16 that uses the generic insert/extract code.
1719         (IF7A, IF7B): Use D16_15.
1720         (IF7C, IF7D): New.  Use D16.
1721         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1722
1723         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1724         message.  Issue an error if the branch offset is odd.
1725
1726         * v850-opc.c: Add notes about needing special insert/extract
1727         for all the load/store insns, except "ld.b" and "st.b".
1728
1729         * v850-opc.c (insert_d22, extract_d22): New functions.
1730         (v850_operands): Use insert_d22 and extract_d22 for
1731         D22 operands.
1732         (insert_d9): Fix range check.
1733
1734 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1735
1736         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1737         and set bits field to D9 and D22 operands.
1738
1739 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
1740
1741         * v850-opc.c (v850_operands): Define SR2 operand.
1742         (v850_opcodes): "ldsr" uses R1,SR2.
1743
1744         * v850-opc.c (v850_opcodes): Fix opcode specs for
1745         sld.w, sst.b, sst.h, sst.w, and nop.
1746
1747 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
1748
1749         * v850-opc.c (v850_opcodes): Add null opcode to mark the
1750         end of the opcode table.
1751
1752 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1753
1754         * d10v-opc.c (pre_defined_registers): Added register pairs,
1755         "r0-r1", "r2-r3", etc.
1756
1757 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
1758
1759         * v850-opc.c (v850_operands): Make I16 be a signed operand.
1760         Create I16U for an unsigned 16bit mmediate operand.
1761         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1762
1763         * v850-opc.c (v850_operands): Define EP operand.
1764         (IF4A, IF4B, IF4C, IF4D): Use EP.
1765
1766         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1767         with immediate operand, "movhi".  Tweak "ldsr".
1768
1769         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1770         correct.  Get sld.[bhw] and sst.[bhw] closer.
1771
1772         * v850-opc.c (v850_operands): "not" is a two byte insn
1773
1774         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1775
1776         * v850-opc.c (v850_operands): D16 inserts at offset 16!
1777
1778         * v850-opc.c (two): Get order of words correct.
1779
1780         * v850-opc.c (v850_operands): I16 inserts at offset 16!
1781
1782         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1783         register source and destination operands.
1784         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1785
1786         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
1787         same thinko in "trap" opcode.
1788
1789         * v850-opc.c (v850_opcodes): Add initializer for size field
1790         on all opcodes.
1791
1792         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
1793         Add D8 for 8-bit unsigned field in short load/store insns.
1794         (IF4A, IF4D): These both need two registers.
1795         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
1796         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1797         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
1798         for "ldsr" and "stsr".
1799         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1800         is unsigned.
1801
1802         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1803         short store word (sst.w).
1804
1805 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1806
1807         * v850-opc.c (v850_operands): Added insert and extract fields,
1808         pointers to functions that handle unusual operand encodings.
1809
1810 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
1811
1812         * v850-opc.c (v850_opcodes): Enable "trap".
1813
1814         * v850-opc.c (v850_opcodes): Fix order of displacement
1815         and register for "set1", "clr1", "not1", and "tst1".
1816
1817 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
1818
1819         * v850-opc.c (v850_operands): Add "B3" support.
1820         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1821         and "tst1".
1822
1823         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1824
1825         * v850-opc.c: Close unterminated comment.
1826
1827 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1828
1829         * v850-opc.c (v850_operands): Add flags field.
1830         (v850_opcodes): add move opcodes.
1831
1832 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1833
1834         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1835         * configure: (bfd_v850v_arch) Add new case.
1836         * configure.in: (bfd_v850_arch) Add new case.
1837         * v850-opc.c: New file.
1838
1839 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
1840
1841         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1842
1843 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1844
1845         * d10v-opc.c: Add additional information to the opcode
1846         table to help determinine which instructions can be done
1847         in parallel.
1848
1849 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
1850
1851         * mpw-make.sed: Update editing of include pathnames to be
1852         more general.
1853
1854 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
1855
1856         * arm-opc.h: Added "bx" instruction definition.
1857
1858 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
1859
1860         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1861
1862 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1863
1864         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1865
1866 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1867
1868         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1869
1870 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
1871
1872         * makefile.vms: Update for alpha-opc changes.
1873
1874 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
1875
1876         * i386-dis.c (print_insn_i386): Actually return the correct value.
1877         (ONE, OP_ONE): #ifdef out; not used.
1878
1879 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1880
1881         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1882         Changed subi operand type to treat 0 as 16.
1883
1884 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
1885
1886         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
1887         <rose@netcom.com>.
1888
1889 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
1890
1891         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1892         memory transfer instructions. Add new format string entries %h and %s.
1893         * arm-dis.c: (print_insn_arm): Provide decoding of the new
1894         formats %h and %s.
1895
1896 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1897
1898         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1899         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1900
1901 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
1902
1903         * alpha-dis.c (print_insn_alpha_osf): Remove.
1904         (print_insn_alpha_vms): Remove.
1905         (print_insn_alpha): Make globally visible.  Chose the register
1906         names based on info->flavour.
1907         * disassemble.c: Always return print_insn_alpha for the alpha.
1908
1909 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1910
1911         * d10v-dis.c (dis_long): Handle unknown opcodes.
1912
1913 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1914
1915         * d10v-opc.c: Changes to support signed and unsigned numbers.
1916         All instructions with the same name that have long and short forms
1917         now end in ".l" or ".s".  Divs added.
1918         * d10v-dis.c: Changes to support signed and unsigned numbers.
1919
1920 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1921
1922         * d10v-dis.c: Change all functions to use info->print_address_func.
1923
1924 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1925
1926         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1927         move ccr/sr insns more strict so that the disassembler only
1928         selects them when the addressing mode is data register.
1929
1930 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1931         * d10v-opc.c (pre_defined_registers):  Declare.
1932         * d10v-dis.c (print_operand): Now uses pre_defined_registers
1933         to pick a better name for the registers.
1934
1935 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
1936
1937         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
1938         operands for fexpand and fpmerge.  From Christian Kuehnke
1939         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1940
1941 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
1942
1943         * alpha-dis.c (print_insn_alpha): No longer the user-visible
1944         print routine.  Take new regnames and cpumask arguments.
1945         Kill the environment variable nonsense.
1946         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
1947         (print_insn_alpha_vms): New function.  Do VMS style regnames.
1948         * disassemble.c (disassembler): Test bfd flavour to pick
1949         between OSF and VMS routines.  Default to OSF.
1950
1951 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
1952
1953         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1954         * configure: Rebuild.
1955         * Makefile.in (install): Use @INSTALL_SHLIB@.
1956
1957 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1958
1959         * configure: (bfd_d10v_arch) Add new case.
1960         * configure.in: (bfd_d10v_arch) Add new case.
1961         * d10v-dis.c: New file.
1962         * d10v-opc.c: New file.
1963         * disassemble.c (disassembler) Add entry for d10v.
1964
1965 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1966
1967         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1968         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1969
1970 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
1971
1972         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
1973         distinguish between variants of the instruction set.
1974         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
1975         distinguish between variants of the instruction set.
1976
1977 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
1978
1979         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
1980         the 8086 instruction set.
1981         * i386-dis.c:  General cleanups.  Make most things static.  Add
1982         prototypes.  Get rid of static variables aflags and dflags.  Pass
1983         them as args (to almost everything).
1984
1985 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
1986
1987         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1988
1989         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1990
1991         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1992         if the next arg is marked with SRC_IN_DST.  Gross.
1993
1994         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1995         we're looking for and find EXR.
1996
1997         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1998         if we're looking for KBIT and we don't find it.
1999
2000         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2001         for L_3 and L_2.
2002
2003         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2004         3bit immediate operands.
2005
2006 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2007
2008         * Released binutils 2.7.
2009
2010         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
2011         <kkaempf@progis.ac-net.de>.
2012
2013 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
2014
2015         * alpha-opc.c: Correct second case of "mov" to use OPRL.
2016
2017 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
2018
2019         * sparc-dis.c (print_insn_sparclite):  New routine to print
2020         sparclite instructions.
2021
2022 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2023
2024         * m68k-opc.c (m68k_opcodes): Add coldfire support.
2025
2026 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
2027
2028         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2029         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2030         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2031
2032 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
2033
2034         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2035         Use autoconf-set values.
2036         (docdir, oldincludedir): Removed.
2037         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2038
2039 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
2040
2041         * alpha-opc.c: New file.
2042         * alpha-opc.h: Remove.
2043         * alpha-dis.c: Complete rewrite to use new opcode table.
2044         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2045         * configure: Rebuild with autoconf 2.10.
2046         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2047         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2048         alpha-opc.h.
2049         (alpha-opc.o): New target.
2050
2051 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
2052
2053         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2054         Set imm_added_to_rs1 even if the source and destination register
2055         are not the same.
2056
2057         * sparc-opc.c: Add some two operand forms of the wr instruction.
2058
2059 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
2060
2061         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2062         to just "mode".
2063
2064         * disassemble.c (disassembler): Handle H8/S.
2065         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2066
2067 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
2068
2069         * sparc-opc.c: Add beq/teq as aliases for be/te.
2070
2071         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
2072         <sergei@msil.sps.mot.com>.
2073
2074 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
2075
2076         * makefile.vms: New file.
2077
2078         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2079
2080 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
2081
2082         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2083         regardless of plen.
2084
2085 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
2086
2087         * i386-dis.c (OP_OFF): Call append_prefix.
2088
2089 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2090
2091         * ppc-opc.c (instruction encoding macros): Add explicit casts to
2092         unsigned long to silence a warning from the Solaris PowerPC
2093         compiler.
2094
2095 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
2096
2097         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2098
2099 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
2100
2101         * sparc-dis.c (X_IMM,X_SIMM): New macros.
2102         (X_IMM13): Delete.
2103         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
2104         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2105         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
2106         cpush, cpusha, cpull sparclet insns.
2107
2108 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
2109
2110         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2111
2112 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
2113
2114         * sparc-opc.c: Set F_FBR on floating point branch instructions.
2115         Set F_FLOAT on other floating point instructions.
2116
2117 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2118
2119         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2120         registers.
2121         (powerpc_opcodes): Add 860/821 specific SPRs.
2122
2123 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
2124
2125         * configure.in: Permit --enable-shared to specify a list of
2126         directories.  Set and substitute BFD_PICLIST.
2127         * configure: Rebuild.
2128         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
2129         uses.  Set to @BFD_PICLIST@.
2130
2131 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
2132
2133         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2134         not "abs", which may be needed for the absolute in something
2135         like btst #0,@10:8.  Print L_3 immediates separately from other
2136         immediates.  Change ABSMOV reference to ABS8MEM.
2137
2138 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
2139
2140         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2141         (current_arch_mask): New static global.
2142         (compute_arch_mask): New static function.
2143         (print_insn_sparc): Delete sparc_v9_p.  New static local
2144         current_mach.  Resort opcode table if current_mach changes.
2145         Generalize "insn not supported" test.
2146         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2147         Delete test for v9/!v9.
2148         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2149         (v6notlet): Define.
2150         (brfc): Split into CBR and FBR for coprocessor/fp branches.
2151         (brfcx): Renamed to FBRX.
2152         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
2153         coprocessor mnemonics are not supported on the sparclet).
2154         (condf): Renamed to CONDF.
2155         (SLCBCC2): Delete F_ALIAS flag.
2156
2157 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
2158
2159         * sparc-opc.c (sparc_opcodes): rd must be 0 for
2160         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
2161
2162 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
2163
2164         * Makefile.in (config.status): Depend upon BFD VERSION file, so
2165         that the shared library version number is set correctly.
2166
2167 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
2168
2169         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
2170         Miles Bader <miles@gnu.ai.mit.edu>.
2171         * configure: Rebuild.
2172
2173 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
2174
2175         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2176         malloc.
2177
2178 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
2179
2180         * configure: Rebuild with autoconf 2.8.
2181
2182 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2183
2184         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2185         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2186
2187 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
2188
2189         * configure.in: Don't set SHLIB or SHLINK to an empty string,
2190         since they appear as targets in Makefile.in.
2191         * configure: Rebuild.
2192
2193 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
2194
2195         * mpw-make.sed: Edit out shared library support bits.
2196
2197 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
2198
2199         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2200         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2201         (sparc_opcodes): Add sparclet insns.
2202         (sparclet_cpreg_table): New static local.
2203         (sparc_{encode,decode}_sparclet_cpreg): New functions.
2204         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2205
2206 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
2207
2208         * i386-dis.c (index16): New static variable.
2209         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2210         other way around.
2211         (OP_indirE): Return result of OP_E.
2212         (OP_E): Check for 16 bit addressing mode, and disassemble
2213         correctly.  Optimised 32 bit case a little.  Don't print
2214         "(base,index,scale)" when sib specifies only an offset.
2215
2216 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
2217
2218         * configure.in: Set and substitute SHLIB_DEP.
2219         * configure: Rebuild.
2220         * Makefile.in (SHLIB_DEP): New variable.
2221         (LIBIBERTY_LISTS, BFD_LIST): New variables.
2222         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
2223         COMMON_SHLIB, add them to piclist with appropriate modifications.
2224         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
2225         here: just use piclist.
2226
2227 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
2228
2229         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2230         (print_insn_sparc): Rewrite v9/not-v9 tests.
2231         (compare_opcodes): Likewise.
2232         * sparc-opc.c (MASK_<ARCH>): Define.
2233         (v6,v7,v8,sparclite,v9,v9a): Redefine.
2234         (sparclet,v6notv9): Define.
2235         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
2236         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2237
2238 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
2239
2240         * configure.in: Call AC_PROG_CC before configure.host.
2241         * configure: Rebuild.
2242
2243         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2244
2245 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
2246
2247         * i386-dis.c (onebyte_has_modrm): New static array.
2248         (twobyte_has_modrm): New static array.
2249         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2250
2251 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2252
2253         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2254         $(SHLINK).
2255
2256 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2257
2258         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2259         doesn't conflict.
2260
2261 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2262
2263         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2264         m68010up, not just m68020up | cpu32.
2265
2266         * Makefile.in (SONAME): New variable.
2267         ($(SHLINK)): Make a link to the transformed name, as well.
2268         (stamp-tshlink): New target.
2269         (install): Skip stamp-tshlink during install.
2270
2271 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2272
2273         * configure.in: Call AC_ARG_PROGRAM.
2274         * configure: Rebuild.
2275         * Makefile.in (program_transform_name): New variable.
2276         (install): Transform library name before installing it.
2277
2278 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
2279
2280         * i960-dis.c (mem): Add HX dcinva instruction.
2281
2282         Support for building as a shared library, based on patches from
2283         Alan Modra <alan@spri.levels.unisa.edu.au>:
2284         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2285         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2286         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2287         * configure: Rebuild.
2288         * Makefile.in (ALLLIBS): New variable.
2289         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2290         (COMMON_SHLIB, SHLINK): New variables.
2291         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2292         (STAGESTUFF): Remove variable.
2293         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2294         (stamp-piclist, piclist): New targets.
2295         ($(SHLIB), $(SHLINK)): New targets.
2296         ($(OFILES)): Depend upon stamp-picdir.
2297         (disassemble.o): Build twice if PICFLAG is set.
2298         (MOSTLYCLEAN): Add pic/*.o.
2299         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2300         (distclean): Remove pic and stamp-picdir.
2301         (install): Install shared libraries.
2302         (stamp-picdir): New target.
2303
2304 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
2305
2306         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2307         Print unknown instruction as "unknown", rather than in hex.
2308
2309 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
2310
2311         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2312
2313 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
2314
2315         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2316
2317 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
2318
2319         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2320         when necessary.  From Ulrich Drepper
2321         <drepper@myware.rz.uni-karlsruhe.de>.
2322
2323 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2324
2325         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2326         sparc_num_opcodes.  Update architecture enum values.
2327         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2328         (sparc_opcode_lookup_arch): New function.
2329         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2330         (sparc_opcodes): Add v9a shutdown insn.
2331
2332 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
2333
2334         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2335         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
2336         architecture.
2337         (print_insn_sparc64): Deleted.
2338         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2339         print_insn_sparc.
2340
2341         * sparc-opc.c (architecture_pname): Add v9a.
2342
2343 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
2344
2345         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2346         incorrectly defined as 0x16 when it should be 0x15.
2347         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2348         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
2349         excb (exception barrier) which is defined in the Alpha
2350         Architecture Handbook version 2.
2351         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2352         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
2353         disassembled as or, for example.
2354
2355 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
2356
2357         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2358         (_print_insn_mips): Change i from int to unsigned int.
2359
2360 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
2361
2362         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2363         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
2364
2365 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
2366
2367         * i386-dis.c: Added Pentium Pro instructions.
2368
2369 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2370
2371         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2372         being for Power2.
2373
2374 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2375
2376         * sh-opc.h (sh_nibble_type): Added REG_B.
2377         (sh_arg_type): Added A_REG_B.
2378         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2379         and stc.l opcodes.
2380         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2381
2382 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2383
2384         * disassemble.c (disassembler): Use new bfd_big_endian macro.
2385
2386 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2387
2388         * Makefile.in (distclean): Remove stamp-h.  From Ronald
2389         F. Guilmette <rfg@monkeys.com>.
2390
2391 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
2392
2393         From David Mosberger-Tang  <davidm@azstarnet.com>:
2394         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2395         instruction.
2396
2397 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2398
2399         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2400         (sh_table): Added many SH3 opcodes.
2401         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2402
2403 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2404
2405         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2406         (subco,subco.): Mark this PPC, not PPCCOM.
2407
2408 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
2409
2410         * configure: Rebuild with autoconf 2.7.
2411
2412 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2413
2414         * configure: Rebuild with autoconf 2.6.
2415
2416 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
2417
2418         * configure.in: Sort list of architectures.  Accept but do nothing
2419         for alliant, convex, pyramid, romp, and tahoe.
2420
2421 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
2422
2423         * a29k-dis.c (print_special): Change num to unsigned int.
2424
2425 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
2426
2427         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2428         shifting it.
2429
2430 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2431
2432         * configure.in: Call AC_CHECK_PROG to find and cache AR.
2433         * configure: Rebuilt.
2434
2435 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
2436
2437         * configure.in: Add case for bfd_i860_arch.
2438         * configure: Rebuild.
2439
2440 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2441
2442         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2443         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2444         (NEXTDOUBLE): Likewise.
2445         (print_insn_m68k): Don't match fmoveml if there is more than one
2446         register in the list.
2447         (print_insn_arg): Handle a place of '8' for a type of 'L'.
2448
2449 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2450
2451         * m68k-opc.c: Use #W rather than #w.
2452         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2453
2454 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2455
2456         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2457         and likewise for all the dbxx opcodes.
2458
2459 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
2460
2461         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2462
2463 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
2464
2465         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2466         the VR4100 specific instructions to the mips_opcodes structure.
2467
2468 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
2469
2470         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2471         ugly Metrowerks bug in CW6, is fixed in CW7.
2472
2473 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2474
2475         * ppc-opc.c (whole file): Add flags for common/any support.
2476
2477 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
2478
2479         * Makefile.in (BISON): Remove macro.
2480         (FLAGS_TO_PASS): Remove BISON.
2481
2482 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
2483
2484         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2485
2486         * m68k-dis.c (print_insn_m68k): Recognize all two-word
2487         instructions that take no args by looking at the match mask.
2488         (print_insn_arg): Always print "%" before register names.
2489         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2490         [case '_']: Don't print "@#" before address.
2491         [case 'J']: Use "%s" as format string, not register name.
2492         [case 'B']: Treat place == 'C' like 'l' and 'L'.
2493
2494 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
2495
2496         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2497         name correctly.
2498
2499 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
2500
2501         From David Mosberger-Tang  <davidm@azstarnet.com>
2502
2503         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2504         (alpha_insn_set): added definitions for VAX floating point
2505         instructions (Unix compilers don't generate these, but handcoded
2506         assembly might still use them).
2507
2508         * alpha-dis.c (print_insn_alpha): added support for disassembling
2509         the miscellaneous instructions in the Alpha instruction set.
2510
2511 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
2512
2513         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2514         no longer create sysdep.h, sed ppc-opc.c to work around a
2515         serious Metrowerks C bug.
2516         * mpw-make.in: Remove.
2517         * mpw-make.sed: New file, used by mpw-configure to edit
2518         Makefile.in into an MPW makefile.
2519
2520 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
2521
2522         * Makefile.in (maintainer-clean): New synonym for realclean.
2523
2524 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2525
2526         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2527         which use '0', '1', and '2' instead.  Specify the proper size for
2528         a pmove immediate operand.  Correct the pmovefd patterns to be
2529         moves to a register, not from a register.
2530         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2531
2532 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
2533
2534         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2535         %psr, %wim, %tbr as F_NOTV9.
2536
2537 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
2538
2539         * Makefile.in (Makefile): Just rebuild Makefile when running
2540         config.status.
2541         (config.h, stamp-h): New targets.
2542         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2543         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
2544         rebuilding config.h.
2545         * configure: Rebuild.
2546
2547         * mips-opc.c: Change unaligned loads and stores with "t,A"
2548         operands to use "t,A(b)".
2549
2550 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2551
2552         * sh-dis.c (print_insn_shx): Add F_FR0 support.
2553
2554 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2555
2556         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2557         until 3 instead of until 2.
2558
2559 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2560
2561         * Makefile.in (ALL_CFLAGS): Define.
2562         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2563         (MOSTLYCLEAN): Add config.log.
2564         (distclean): Don't remove config.log.
2565         * configure.in: Substitute HDEFINES.
2566         * configure: Rebuild.
2567
2568 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2569
2570         * sh-opc.h (sh_arg_type): Add F_FR0.
2571         (sh_table, case fmac): Add F_FR0 as first argument.
2572
2573 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2574
2575         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2576
2577 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
2578
2579         * sparc-dis.c: Remove all references to NO_V9.
2580
2581 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
2582
2583         * aclocal.m4: Just include ../bfd/aclocal.m4.
2584         * configure: Rebuild.
2585
2586 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
2587
2588         * sparc-dis.c (X_DISP19): Define.
2589         (print_insn, case 'G'): Use it.
2590         (print_insn, case 'L'): Sign extend displacement.
2591
2592 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
2593
2594         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2595         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
2596         host_makefile_frag or frags.
2597         * aclocal.m4: New file.
2598         * configure: Rebuild.
2599         * Makefile.in (INSTALL): Set to @INSTALL@.
2600         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2601         (INSTALL_DATA): Set to @INSTALL_DATA@.
2602         (AR): Set to @AR@.
2603         (AR_FLAGS): Set to rc rather than qc.
2604         (CC): Define as @CC@.
2605         (CFLAGS): Set to @CFLAGS@.
2606         (@host_makefile_frag@): Remove.
2607         (config.status): Remove dependency upon @frags@.
2608
2609         * configure.in: ../bfd/config.bfd now just sets shell variables.
2610         Use them rather than looking through target Makefile fragments.
2611         * configure: Rebuild.
2612
2613 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2614
2615         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2616
2617 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
2618
2619         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2620         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2621         sparc64 insns.
2622
2623         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2624         (lookup_{name,value}): New functions.
2625         (prefetch_table): New static local.
2626         (sparc_{encode,decode}_prefetch): New functions.
2627         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2628
2629 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2630
2631         * sh-opc.h: Add blank lines to improve readabililty of sh3e
2632         instructions.
2633
2634 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2635
2636         * sh-dis.c: Correct comment on first line of file.
2637
2638 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
2639
2640         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2641
2642         * sparc-opc.c (asi, membar): New static locals.
2643         (sparc_{encode,decode}_{asi,membar}): New functions.
2644         (sparc_opcodes, membar insn): Fix.
2645         * sparc-dis.c (print_insn): Call sparc_decode_asi.
2646         Support decoding of membar masks.
2647         (X_MEMBAR): Define.
2648
2649 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
2650
2651         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2652
2653 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2654
2655         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2656         and likewise for the other branches.  Add bhs as an alias for bcc,
2657         and likewise for the size variants.  Add dbhs as an alias for
2658         dbcc.
2659
2660 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
2661
2662         * sh-opc.h (FP sts instructions): Update to match reality.
2663
2664 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
2665
2666         * m68k-dis.c: (fpcr_names): Add % before all register names.
2667         (reg_names): Likewise.
2668         (print_insn_arg): Don't explicitly print % before register names.
2669         Add % before register names in static array names.  In case 'r',
2670         print data registers as `@(Dn)', not `Dn@'.  When printing a
2671         memory address, don't print @# before it.
2672         (print_indexed): Change base_disp and outer_disp from int to
2673         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
2674         syntax.  Sign extend 8 byte displacement correctly.
2675         (print_base): Print using MIT syntax.  Print zpc when appropriate.
2676         Change parameter disp from int to bfd_vma.
2677
2678         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2679         for jsr.
2680
2681 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2682
2683         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2684         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2685         * sh-opc.h (sh_arg_type): Add new operand types.
2686         (sh_table): Add new opcodes from SH3E Floating Point ISA.
2687
2688 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2689
2690         * Makefile.in (distclean): Remove generated file config.h.
2691
2692 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2693
2694         * Makefile.in (distclean): Remove generated file config.h.
2695
2696 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
2697
2698         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2699         Clean up tables.
2700         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2701         (opcode): Remove.
2702         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
2703         rather than numopcodes.  Use m68k_opcodes rather than removed
2704         opcode function.  Don't check F_ALIAS.
2705         (print_insn_arg): Change first parameter to be const char *.
2706         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2707         (m68k-opc.o): New target.
2708         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2709         * configure: Rebuild.
2710
2711 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
2712
2713         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2714         (opcode_bits, opcode_hash_table): New variables.
2715         (opcodes_initialized): Renamed from opcodes_sorted.
2716         (build_hash_table): New function.
2717         (is_delayed_branch): Use hash table.
2718         (print_insn): Renamed from print_insn_sparc, made static.
2719         Build and use hash table.  If !sparc64, ignore sparc64 insns,
2720         and vice-versa if sparc64.
2721         (print_insn_sparc, print_insn_sparc64): New functions.
2722         (compare_opcodes): Move sparc64 opcodes to end.
2723         Print commutative insns with constant second.
2724         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2725
2726 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2727
2728         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
2729         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
2730         avoids printing a delay slot in a delay slot.
2731         * sh-opc.h (sh_table): Fully bracket last entry.
2732
2733 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
2734
2735         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2736
2737 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
2738
2739         * configure.in: Get host_makefile_frag from ${srcdir}.
2740
2741         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
2742         config.h from config.in.  Don't set up sysdep.h link.
2743         * sysdep.h: New file.
2744         * configure, config.in: New files, generated from configure.in.
2745         * Makefile.in: Updated to be processed autoconf-style.
2746         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
2747         (Makefile): Depend on config.status.
2748         (config.status): New rule.
2749         * configure.bat: Update Makefile substitutions.
2750
2751 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
2752
2753         * mips-opc.c (L1): Define.
2754         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2755         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2756         and wb.
2757
2758 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2759
2760         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2761         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2762         have multiple add units but only a single logical unit.
2763
2764         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2765         shifted by 18, without any insertion or extraction function.
2766         (insert_cr, extract_cr): Remove.
2767
2768 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2769
2770         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2771         register names.
2772
2773 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
2774
2775         * mpw-config.in: Add sh and i386 configs, remove sparc config.
2776         * sh-opc.h: Add copyright.
2777
2778 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
2779
2780         * Makefile.in (crunch-m68k): Delete extra target accidentally
2781         checked in a while ago.
2782
2783 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2784
2785         * sh-opc.h (sh_table): Add SH3 support.
2786
2787 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
2788
2789         * sh-opc.h: Added bsrf and braf.
2790
2791 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2792
2793         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
2794         bogus [ls]fm{ea,fd} patterns.
2795
2796         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2797         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2798         initialize it from memory.  Make function static.
2799         (print_insn_{big,little}_arm): New functions.
2800         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2801         the correct endianness.
2802
2803 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
2804
2805         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2806         enum list.
2807
2808 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2809
2810         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2811         17th, so that it builds again using GCC as the compiler.
2812
2813 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2814
2815         * mips-dis.c (print_insn_little_mips): Cast return value from
2816         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2817         expects an unsigned long, and that might be fewer words of
2818         argument storage (e.g., if bfd_vma is long long on a 32-bit
2819         machine).
2820         (print_insn_big_mips): Likewise with bfd_getb32 value.
2821         (_print_insn_mips): Now static.
2822
2823 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
2824
2825         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2826         gcc memory hog problem with initializer is fixed.
2827
2828 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
2829
2830         Merge in support for Mac MPW as a host.
2831         (Old change descriptions retained for informational value.)
2832
2833         * mpw-config.in (archname): Compute from the config.
2834         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2835
2836         * mpw-config.in (target_arch): Compute from canonical target.
2837         (m68k, mips, powerpc, sparc): Add architectures.
2838         * mpw-make.in (disassemble.c.o): Add.
2839         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2840
2841         * mpw-config.in (BFD_MACHINES): Set to a default value.
2842         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2843
2844         * mpw-make.in (CSEARCH): Add extra-include to search path.
2845
2846         * mpw-config.in (varargs.h): Don't create.
2847         (sysdep.h): Create using forward-include.
2848         * mpw-make.in (CSEARCH): Add include/mpw to search path.
2849
2850         * mpw-config.in: New file, MPW version of configure.in.
2851         * mpw-make.in: New file, MPW version of Makefile.in.
2852
2853 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2854
2855         * alpha-dis.c (print_insn_alpha): Put empty statement after
2856         default label.
2857
2858 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2859
2860         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2861         (low_sign_extend): Likewise.
2862         (get_field): Delete unused function.
2863         (set_field, deposit_14, deposit_21): Likewise.
2864
2865 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2866
2867         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
2868           (guy@netapp.com).
2869
2870 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
2871
2872         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
2873
2874         * alpha-opc.h (OSF_ASMCODE): define
2875         print pal-code names as defined in App C of the
2876         Alpha Architecture Reference Manual
2877
2878         * alpha-dis.c: cleaned up output
2879         print stylized code forms as defined in App A.4.3 of the
2880         Alpha Architecture Reference Manual
2881
2882 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
2883
2884         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
2885         `rfe'.
2886         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2887         'N', and 'M'.
2888
2889 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2890
2891         * m68k-dis.c (opcode): New function.  Returns address of opcode
2892         table entry given index, even if the opcode table was split to
2893         work around gcc bugs.
2894         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2895         directly.
2896         (BREAK_UP_BIG_DECL): Make secondary array static and const.
2897         (reg_names): Now const.
2898         (print_insn_arg): Arrays cacheFieldName and names now const.
2899         (print_indexed): Array scales now const.
2900
2901 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
2902
2903         * ppc-opc.c: Sort recently added instructions by minor opcode
2904         number within major opcode number.
2905
2906 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
2907
2908         * hppa-dis.c: Include libhppa.h.
2909
2910 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2911
2912         * mips-opc.c: Change dli to use M_DLI, and add dla.
2913
2914 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2915
2916         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
2917
2918 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
2919
2920         * mips-opc.c: Add r4650 mul instruction.
2921
2922 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
2923
2924         * mips-opc.c: Add uld and usd macros for unaligned double load and
2925         store.
2926
2927 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2928
2929         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2930         mfdcr, mtdcr, icbt, iccci.
2931
2932 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
2933
2934         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2935         signed char fields to shorts, more portable.
2936
2937 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
2938
2939         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2940         char fields as signed chars, since they may have negative values.
2941
2942 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2943
2944         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2945           (mycroft@netbsd.org).
2946
2947 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
2948
2949         From "Logg, Ed" <elogg@ea.com>:
2950         * ppc-opc.c (extract_bdm): Correct parenthezisation.
2951         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2952         value.
2953
2954 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
2955
2956         * ppc-opc.c: Changes based on patch from David Edelsohn
2957         <edelsohn@mhpcc.edu>.
2958         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2959         SPR.
2960         (FXM_MASK): Define.
2961         (insert_tbr): New static function.
2962         (extract_tbr): New static function.
2963         (XFXFXM_MASK, XFXM): Define.
2964         (XSPRBAT_MASK, XSPRG_MASK): Define.
2965         (powerpc_opcodes): Add instructions to access special registers by
2966         name.  Add mtcr and mftbu.
2967
2968 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2969
2970         * mips-opc.c (P3): Define.
2971         (mips_opcodes): Add mad and madu.
2972
2973 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
2974
2975         * configure.in: Add W65 support.
2976         * disassemble.c: Likewise.
2977         * w65-opc.h, w65-dis.c: New files.
2978
2979 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2980
2981         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2982         immediates.
2983
2984 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2985
2986         * mips-opc.c: Add dli as a synonym for li.
2987
2988 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2989
2990         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2991         print something for reserved opcode values, even if it won't
2992         assemble again.
2993
2994         * mips-dis.c (_print_insn_mips): When initializing, shift right
2995         and mask, to avoid sign extension problems on the Alpha.
2996
2997         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2998         control registers.
2999
3000 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
3001
3002         * sh-opc.h (mov.l gbr): Get direction right.
3003         * sh-dis.c (print_insn_shx): New function.
3004         (print_insn_shl, print_insn_sh): Call print_insn_shx to
3005         print opcodes with right byte order.
3006
3007 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
3008
3009         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3010         to avoid conflicts with getopt.
3011
3012 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3013
3014         * hppa-dis.c (print_insn_hppa): Read the instruction using
3015         bfd_getb32, so that it works on a little endian or 64 bit host.
3016         Remove unused local variable op.
3017
3018 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3019
3020         * mips-opc.c: Use or instead of addu for pseudo-op move, since
3021         addu does not work correctly if -mips3.
3022
3023 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3024
3025         * a29k-dis.c (print_special): Add special register names defined
3026         on 29030, 29040 and 29050.
3027         (print_insn): Handle new operand type 'I'.
3028
3029 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3030
3031         * Makefile.in (INSTALL): Use top level install.sh script.
3032
3033 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3034
3035         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3036         that it works on a little endian host.
3037
3038 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3039
3040         * configure.in: Use ${config_shell} when running config.bfd.
3041
3042 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3043
3044         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3045
3046 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3047
3048         * a29k-dis.c (print_insn): Print the opcode.
3049
3050 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3051
3052         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3053
3054 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
3055
3056         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3057
3058 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3059
3060         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3061         which store a value into memory.
3062
3063 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3064
3065         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3066         * arm-dis.c, arm-opc.h: New files.
3067
3068 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
3069
3070         * Makefile.in (ns32k-dis.o): Add dependency.
3071         * ns32k-dis.c (print_insn_arg): Declare initialized local as
3072         string, not as array of chars.
3073
3074 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3075
3076         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3077
3078         * sparc-opc.c: Added sparclite extended FP operations, and
3079         versions of v9 impdep* instructions permitting specification of
3080         the OPF field.
3081
3082 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3083
3084         * i960-dis.c (reg_names): Now const.
3085         (struct sparse_tabent): New type, copied from array type in mem
3086         function.
3087         (ctrl): Local static array ctrl_tab now const.
3088         (cobr): Local static array cobr_tab now const.
3089         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
3090         static variable mem_tab no longer explicitly initialized.  Changed
3091         mem_init to const array of struct sparse_tabent.
3092         (reg): Local static variable reg_tab no longer explicitly
3093         initialized.  Changed reg_init to const array of struct
3094         sparse_tabent.
3095         (ea): Local static array scale_tab now const.
3096
3097         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3098         (REG_MAX): Updated.
3099
3100 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
3101
3102         * configure.bat: the disassember needs to be enabled for
3103         "objdump -d" to work in djgpp.
3104
3105 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3106
3107         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3108         (invalid_float): Enabled general version, doesn't require running
3109         on ns32k host.  Changed to take char* argument, and test for
3110         explicitly specified sizes, instead of using sizeof() on host CPU
3111         types.
3112         (INVALID_FLOAT): Cast first argument.
3113         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3114         list_P032, list_M032): Now const.
3115         (optlist, list_search): Made appropriate arguments now point to
3116         const.
3117         (print_insn_arg): Changed static array of one-character-string
3118         pointers into a static const array of characters; fixed sprintf
3119         statement accordingly.
3120
3121 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
3122
3123         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
3124         from distribution. A ns32k-dis.c from a previous distribution has
3125         been brought up to date and supports the new interface.
3126
3127         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3128
3129         * configure.in: add bfd_ns32k_arch target support.
3130
3131         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3132         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3133
3134 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
3135
3136         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3137         disassembly right.
3138
3139 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
3140
3141         * h8300-dis.c, mips-dis.c: Don't use true and false.
3142
3143 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
3144
3145         * configure.in: Change --with-targets to --enable-targets.
3146
3147 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3148
3149         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3150         opcodes to the first instruction with that opcode, to speed
3151         disassembly of large files.  From ralphc@pyramid.com (Ralph
3152         Campbell).
3153
3154 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3155
3156         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3157
3158 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
3159
3160         * configure.bat: update to latest makefile.in
3161
3162 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
3163
3164         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3165         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3166         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3167         slot insn is in a delay slot.
3168         * z8k-opc.h: (resflg): Fix patterns.
3169         * h8500-opc.h Fix CR insn patterns.
3170
3171 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3172
3173         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3174         "cmpl" before POWER versions, so that gas -many uses them.
3175
3176 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3177
3178         * disassemble.c: New file.
3179         * Makefile.in (OFILES): Add disassemble.o.
3180         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3181         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
3182         binutils/configure.in.
3183
3184         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3185         opcode being examined.
3186
3187 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3188
3189         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3190         (insert_ral, insert_ram, insert_ras): New functions.
3191         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3192         RAS for store with update.
3193
3194 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3195
3196         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
3197         (edelsohn@npac.syr.edu).
3198
3199 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3200
3201         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3202         immediate argument.
3203
3204 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
3205
3206         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3207
3208 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3209
3210         * ppc-opc.c (powerpc_operands): The signedp field has been
3211         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
3212         instead.  Add new operand SISIGNOPT.
3213         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3214         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3215         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3216         than signedp field.
3217
3218 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3219
3220         * i386-dis.c (struct private):  Renamed to dis_private. `private'
3221         is a reserved word for dynix cc.
3222
3223 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3224
3225         * configure.in: Change error message to refer to bfd/config.bfd
3226         rather than bfd/configure.in.
3227
3228 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
3229
3230         * ppc-opc.c: Define POWER2 as short alias flag.
3231         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3232         fsqrt.
3233
3234 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3235
3236         * i960-dis.c (print_insn_i960): Don't read a second word for
3237         opcodes 0, 1, 2 and 3.
3238
3239 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3240
3241         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3242
3243 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3244
3245         * m68881-ext.c: Removed; no longer used.
3246         * Makefile.in: Changed accordingly.
3247
3248         * m68k-dis.c (ext_format_68881): Don't declare.
3249         (print_insn_m68k): If an instruction uses place 'i', it uses at
3250         least four fixed bytes.
3251         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
3252         extended float, convert to double using floatformat_to_double, not
3253         ieee_extended_to_double, and fetch the data before converting it.
3254
3255 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3256
3257         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
3258         davidj@ICSI.Berkeley.EDU (David Johnson).
3259
3260 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3261
3262         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3263         PowerPC uses bdnz[l][a].
3264
3265 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3266
3267         * dis-buf.c, i386-dis.c:  Include sysdep.h.
3268
3269 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3270
3271         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3272
3273         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3274         by Motorola PowerPC 601 with PPC_OPCODE_601.
3275         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3276         Disassemble Motorola PowerPC 601 instructions as well as normal
3277         PowerPC instructions.
3278
3279 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3280
3281         * i960-dis.c (reg, mem): Just use a static array instead of
3282         calling xmalloc.
3283
3284 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3285
3286         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3287         condition name index if this is for a negated condition.
3288
3289         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3290         Floating point format for 'H' operand is backwards from normal
3291         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
3292         operands (fmpyadd and fmpysub), handle bizarre register
3293         translation correctly for single precision format.
3294
3295         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3296         or 'I' operands if the next format specifier is 'M' (fcmp
3297         condition completer).
3298
3299 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3300
3301         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3302         single number giving a bitmask for the MB and ME fields of an M
3303         form instruction.  Change NB to accept 32, and turn it into 0;
3304         also turn 0 into 32 when disassembling.  Seperated SH from NB.
3305         (insert_mbe, extract_mbe): New functions.
3306         (insert_nb, extract_nb): New functions.
3307         (SC_MASK): Mask out SA and LK bits.
3308         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3309         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
3310         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
3311         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3312         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3313         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
3314         (powerpc_macros): Define table of macro definitions.
3315         (powerpc_num_macros): Define.
3316
3317         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3318         if PPC_OPERAND_NEXT is set.
3319
3320 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3321
3322         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3323         char.  Retrieve contents using bfd_getl32 instead of shifting.
3324
3325 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3326
3327         * ppc-opc.c: New file.  Opcode table for PowerPC, including
3328         opcodes for POWER (RS/6000).
3329         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
3330         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3331         (CFILES): Add ppc-dis.c.
3332         (ppc-dis.o, ppc-opc.o): New targets.
3333         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3334
3335 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3336
3337         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3338         No space before 'u', 'f', or 'N'.
3339
3340 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3341
3342         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3343         farther than we should.
3344
3345         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3346
3347 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3348
3349         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3350
3351 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3352
3353         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3354         needs it, to prevent reading past the end of a section.
3355
3356 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3357
3358         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3359         Removed t,A case for la; always use t,A(b) case.
3360
3361 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3362
3363         From Ted Lemen <mellon@pepper.ncd.com>
3364         * mips-dis.c (print_insn_arg): Handle 'k'.
3365         * mips-opc.c: Make cache use k, not t.
3366
3367 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3368
3369         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
3370         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3371         FLOAT_FORMAT_CODE to put out floating point register names.
3372
3373 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3374
3375         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3376
3377 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3378
3379         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3380
3381 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3382
3383         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3384         larger than 32.  Moved dsxx32 variants first for disassembler.
3385
3386 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3387
3388         * z8kgen.c, z8k-opc.h: Add full lda information.
3389
3390 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
3391
3392         * hppa-dis.c (print_insn_hppa): Do not emit a space after
3393         movb instructions.  Any necessary space will be emitted by
3394         the code to handle nullification completers.
3395
3396 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3397
3398         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3399
3400 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3401
3402         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
3403         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
3404
3405 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3406
3407         * mips-opc.c: Correct lwu opcode value (book had it wrong).
3408
3409 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3410
3411         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3412         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3413
3414 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
3415
3416         * m88k-dis.c (m88kdis): comment change.  Remove space after
3417           printing mnemonic.
3418           (printop): handle new arg types DEC and XREG for m88110.
3419
3420 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
3421
3422         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3423         type for absolute branch addresses.  Delete special
3424         "ble" and "be" code in 'W' operand code.
3425
3426 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3427
3428         * mips-opc.c: Set hazard information correctly for branch
3429         likely instructions.
3430
3431 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3432
3433         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
3434         info->fprintf_func for printing and info->print_address_func for
3435         address output.
3436
3437 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3438
3439         * mips-opc.c: Set INSN_TRAP for tXX instructions.
3440
3441 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3442
3443         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3444         Corrected second case of "b" for disassembler.
3445
3446 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3447
3448         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
3449         to BFD swapping routines to correspond to BFD name changes.
3450
3451 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3452
3453         * mips-opc.c: Change div machine instruction to be z,s,t rather
3454         than s,t.  Change div macro to be d,v,t rather than d,s,t.
3455         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
3456         rem and remu which generates only the corresponding div
3457         instruction.  This is for compatibility with the MIPS assembler,
3458         which only generates the simple machine instruction when an
3459         explicit destination of $0 is used.
3460         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3461
3462 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3463
3464         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3465         WR_31 hazard for bal, bgezal, bltzal.
3466
3467 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3468
3469         * hppa-dis.c (print_insn_hppa): Use print function
3470         from within the disassemble_info, not fprintf_filtered.
3471
3472 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3473
3474         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
3475         Law, law@cs.utah.edu.)
3476
3477 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3478
3479         * mips-opc.c ("absu"): Removed.
3480         ("dabs"): Added.
3481
3482 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3483
3484         * mips-opc.c: Added r6000 and r4000 instructions and macros.
3485         Changed hazard information to distinguish between memory load
3486         delays and coprocessor load delays.
3487
3488 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3489
3490         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
3491
3492 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3493
3494         * configure.in: Don't pass cpu to config.bfd.
3495
3496 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3497
3498         * m88k-dis.c (m88kdis): Make class unsigned.
3499
3500 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
3501
3502         * alpha-dis.c (print_insn_alpha): One branch format case was
3503         missing the instruction name.
3504
3505 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3506
3507         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3508         Add the arch-specific auxiliary files.
3509         (OFILES): Remove the arch-specific auxiliary files
3510         and use BFD_MACHINES instead of DIS_LIBS.
3511         * configure.in: Set BFD_MACHINES based on --with-targets option.
3512
3513 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3514
3515         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
3516         for swc1.
3517
3518 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3519
3520         * sparc-opc.c: Change CONST to const to deal with gcc
3521         -Dconst=__const -traditional.
3522
3523 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3524
3525         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3526         coprocessor instructions out of #if 0, and made them use new
3527         argument type "C".
3528
3529 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3530
3531         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3532
3533 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
3534
3535         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3536         instruction, for use by the disassembler.
3537
3538         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
3539         hand-coded sign extensions that depended on 32-bit host ints.
3540         FIXME, we still depend on big-endian host bitfield ordering.
3541         (sparc_print_insn):  Set the insn_info_valid field, and the
3542         other fields that describe the instruction being printed.
3543
3544 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
3545
3546         * sparc-opc.c (call): Accept all 6 addressing modes valid for
3547         `jmp' instead of just one of them.
3548
3549 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3550
3551         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3552         (fput_fp_reg_r): Renamed from fput_reg_r.
3553         (fput_fp_reg): New function.
3554         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3555
3556         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3557
3558         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3559
3560 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3561
3562         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3563
3564         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3565         don't output a space.
3566
3567         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3568
3569 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
3570
3571         * mips-opc.c: New file, containing opcode table from
3572         ../include/opcode/mips.h.
3573         * Makefile.in: Add it.
3574
3575 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3576
3577         * m88k-dis.c: New file, moved in from gdb and changed to use the
3578         new dis-asm.h disassembler interface.
3579         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3580         (m88k-dis.o): New target.
3581
3582 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
3583
3584         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3585         argument string const char * to correspond to opcode/mips.h.
3586
3587 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
3588
3589         * mips-dis.c: Updated to account for name changes in new version
3590         of opcode/mips.h.
3591         * Makefile.in: Added header file dependencies.
3592
3593 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
3594
3595         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3596
3597 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3598
3599         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3600         extend, rather than shifts.
3601
3602 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
3603
3604         * Makefile.in: Undo 15 June change.
3605
3606 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
3607
3608         * m68k-dis.c (print_insn_arg):  Change return value to byte count
3609         or error code.
3610         * m68k-dis.c:  Re-write to detect invalid operands before
3611         printing anything, so we can handle this the same way we
3612         handle invalid opcodes.
3613
3614 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3615
3616         * sh-dis.c, sh-opc.h: Understand some more opcodes.
3617
3618 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
3619
3620         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3621         header files.
3622
3623 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3624
3625         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3626
3627         * configure.in: Do make sysdep.h link.
3628         * Makefile.in: Search ../include.  Don't search ../bfd.
3629
3630 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
3631
3632         Changes from Jeff Law, law@cs.utah.edu:
3633         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
3634         Do not print a space before the completers specified by
3635         'a' and 'd'.
3636
3637 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
3638
3639         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3640         defined, since gdb has been fixed.
3641
3642         Changes from Jeff Law, law@cs.utah.edu:
3643         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3644         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3645         be a *disassemble_info, not a *FILE.
3646         * hppa-dis.c: Support 'd', '!', and 'a'.
3647         * hppa-dis.c: Support 's' to extract a 2 bit space register.
3648         * hppa-dis.c: Delete cases which are no longer needed.
3649
3650 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
3651
3652         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3653
3654 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3655
3656         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3657         H8/300-H opcodes.
3658
3659 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
3660
3661         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3662         * configure.in:  No longer need to configure to get sysdep.h.
3663
3664 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
3665
3666         * Patches from Jeffrey Law <law@cs.utah.edu>.
3667         * hppa-dis.c: Support 'I', 'J', and 'K' in output
3668         templates for 1.1 FP computational instructions.
3669
3670 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3671
3672         * h8500-dis.c (print_insn_h8500): Address argument is type
3673         bfd_vma.
3674         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3675         Ditto.
3676
3677         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3678         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3679
3680         * sparc-dis.c (compare_opcodes): Move static declaration to
3681         top-level.
3682
3683 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3684
3685         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3686         instruction, remove unimp hack from 'l' argument.
3687
3688 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
3689
3690         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
3691         happy.
3692
3693 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
3694
3695         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3696         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3697         instructions.
3698
3699 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3700
3701         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
3702         arrays of string pointers to 2-d arrays of chars, to save
3703         space.
3704
3705 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
3706
3707         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3708         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3709
3710 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3711
3712         * hppa-dis.c: New file from Utah, adapted to new disassembler
3713         calling interface.
3714         * Makefile.in: Include it.
3715
3716 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3717
3718         * sh-dis.c, sh-opc.h: New files.
3719
3720 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3721
3722         * alpha-dis.c, alpha-opc.h: New files.
3723
3724 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3725
3726         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3727         value.
3728
3729 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
3730
3731         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3732
3733 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
3734
3735         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3736         const.
3737
3738 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
3739
3740         * sparc-dis.c: Use fprintf_func a few places where I forgot,
3741         and double percent signs a few places.
3742
3743         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3744
3745         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3746         Use info->print_address_func not print_address.
3747
3748         * dis-buf.c (generic_print_address): New function.
3749
3750 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3751
3752         * Makefile.in: Add sparc-dis.c.
3753         sparc-dis.c: New file, merges binutils and gdb versions as follows:
3754         From GDB:
3755             Add `add' instruction to the set that get checked
3756             for a preceding `sethi' in order to print an absolute address.
3757             * (print_insn):  Disassembly prefers real instructions.
3758             (is_delayed_branch):  Speed up.
3759             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
3760             Still missing some float ops, and needs testing.
3761             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3762             F_ALIAS.  Use printf, not fprintf, when not passing a file
3763             pointer...
3764             (compare_opcodes): Check that identical instructions have
3765             identical opcodes, complain otherwise.
3766         From binutils:
3767             * New 'm' arg.
3768             * Include reg_names.
3769         From neither:
3770             Use dis-asm.h/read_memory_func interface.
3771
3772 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
3773
3774         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3775           deliberately return non-zero to setjmp from longjmp.  Otherwise
3776           this code fails to compile.
3777
3778 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
3779
3780         * m68k-dis.c:  Fix prototype for fetch_arg().
3781
3782 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3783
3784         * dis-buf.c: New file, for new read_memory_func interface.
3785         Makefile.in (OFILES): Include it.
3786         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3787         Use new read_memory_func interface.
3788
3789 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3790
3791         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3792         * h8500-opc.h: Fix couple of opcodes.
3793
3794 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
3795
3796         * Makefile.in: add dvi & installcheck targets
3797
3798 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
3799
3800         * Makefile.in:  Update for h8500-dis.c.
3801
3802 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3803
3804         * h8500-dis.c, h8500-opc.h: New files
3805
3806 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
3807
3808         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
3809         ../include/dis-asm.h.
3810         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
3811         and ../gdb/m68k-pinsn.c).
3812         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
3813         and ../gdb/i386-pinsn.c).
3814         * m68881-ext.c:  New file.  Moved definition of
3815         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3816         * Makefile.in:  Adjust for new files.
3817         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
3818         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
3819         can be dis-assembled.
3820
3821 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3822
3823         * mips-dis.c (print_insn_arg): Now returns void.
3824
3825 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
3826
3827         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
3828         files that use the macros.
3829
3830 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3831
3832         * mips-dis.c: New file, from gdb/mips-pinsn.c.
3833         * Makefile.in (DIS_LIBS): Added mips-dis.o.
3834         (CFILES): Added mips-dis.c.
3835
3836 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3837
3838         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3839         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3840
3841 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
3842
3843         * Makefile.in:  Improve *clean rules.
3844         * configure.in:  Allow a default host.
3845
3846 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3847
3848         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3849         files include other sysdep files
3850
3851 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3852
3853         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3854
3855 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
3856
3857         * configure.in:  For host support, use ../bfd/configure.host
3858         so it stays in sync with the ../bfd/hosts database.
3859
3860 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3861
3862         * configure.in: use cpu-vendor-os triple instead of nested cases
3863
3864 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
3865
3866         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3867         *always* the wrong one.
3868
3869 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3870
3871         * z8kgen.c: added copyright info
3872
3873 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3874
3875         * z8k-dis.c (unparse_instr): prettier tabs
3876         * z8kgen.c -> z8k-opc.h: bug fixes in tables
3877
3878 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
3879
3880         * configure.in:  Add ncr* configuration.
3881         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
3882         picayune ANSI compilers happy.
3883
3884 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
3885
3886         * configure.in (i386):  Make i386 and i486 synonymous for now.
3887         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
3888
3889 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3890
3891         * Makefile.in (install): Fix typo.
3892
3893 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
3894
3895         * Makefile.in (make):  Remove obsolete crud.
3896         (sparc-opc.o):  Avoid Sun Make VPATH bug.
3897
3898 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
3899
3900         * Makefile.in: since there are no SUBDIRS, remove rule and
3901         references of subdir_do.
3902
3903 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3904
3905         * Makefile.in (install): Get the library name right here too.
3906         Don't install bfd.h, since it's unrelated to this library.  No
3907         subdirs to recurse into, either.
3908         (CFILES): The source file has a .c suffix, not .o.
3909
3910         * sparc-opc.c: New file, moved from BFD.
3911         * Makefile.in (OFILES): Build it.
3912
3913 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
3914
3915         * z8k-dis.c: fixed forward refferences of some declarations.
3916
3917 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
3918
3919         * Makefile.in: get the name of the library right
3920
3921 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3922
3923         * z8k-dis.c: knows how to disassemble z8k stuff
3924         * z8k-opc.h: new file full of z8000 opcodes
3925
3926 \f
3927 Local Variables:
3928 version-control: never
3929 End: