1 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
3 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
4 (cgen_hw_lookup_by_num): New function.
7 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
10 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
12 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
14 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
16 * sparc-dis.c (print_insn_sparc): Always fetch instructions
17 as big-endian on SPARClite.
20 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
22 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
24 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
28 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
30 * d30v-opc.c (pre_defined_register): Remove alias for r0.
33 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
35 * mips-opc.c (break): Added 20-bit single-operand break
36 instruction for R5900 only.
39 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
41 * po/Make-in (install-info): New target.
43 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
45 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
48 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
50 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
51 variety of ISA2 instructions to set bottom ten bits of trap code.
53 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
55 * Makefile.am (config.status): Add explicit target so that
56 config.status depends upon bfd/configure.in.
57 * Makefile.in: Rebuild.
59 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
61 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
62 instructions to set bottom ten bits of break code.
63 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
64 for above optional argument.
67 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
69 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
70 * m32r-opc.h: Regenerate.
73 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
75 * makefile.vms: Run dec c with /nodebug.
77 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
79 * Makefile.in: Rebuilt.
80 * Makefile.am: Regenerated dependencies with mkdep.
82 * opintl.h (_): Define as dgettext.
85 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
87 * configure.in: Add support for --enable-cgen-maint.
88 * Makefile.am (M32R_DEPS): New variable.
89 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
90 * aclocal.m4: Regenerate.
91 * Makefile.in: Regenerate.
92 * configure: Regenerate.
94 * Makefile.am (CGENFILES): Add minsn.scm.
97 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
99 * cgen-asm.c: Internationalised.
100 start-sanitize-cygnus
101 * cgen-asm.in: Internationalised.
102 * cgen-opc.in: Internationalised.
104 * m32r-asm.c: Internationalised.
105 * m32r-dis.c: Internationalised.
106 * m32r-opc.c: Internationalised.
108 * aclocal.m4: Regenerated.
109 * configure: Regenerated.
110 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
111 * Makefile.in: Rebuild.
112 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
113 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
115 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
117 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
119 * aclocal.m4, configure: Rebuild with current tools.
121 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
123 * opintl.h: New file - contains internationalisation macros used
124 by source files in this directory.
125 * po/: New subdirectory - contains internationalisation files.
126 * po/Make-in: New file - Makefile constructor.
127 * po/POTFILES.in: New file - list of files in opcodes directory
128 that should be scan for internationalisation macros.
129 * po/opcodes.pot: New file - list of internationisation strings
130 found in files mentioned in po/POTFILES.in.
131 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
132 entry. Add intl directory to include paths.
133 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
134 HAVE_STRCPY, HAVE_LC_MESSAGES
135 * configure.in: Add rule to build Makefile in po subdirectory.
136 * Makefile.in: Rebuilt.
137 * aclocal.m4: Rebuilt.
138 * config.in: Rebuilt.
139 * configure: Rebuilt.
140 * alpha-opc.c: Internationalised.
141 * arc-dis.c: Internationalised.
142 * arc-opc.c: Internationalised.
143 * arm-dis.c: Internationalised.
144 * cgen-asm.c: Internationalised.
146 * d30v-dis.c: Internationalised.
148 * dis-buf.c: Internationalised.
150 * dvp-dis.c: Internationalised.
151 * dvp-opc.c: Internationalised.
153 * h8300-dis.c: Internationalised.
154 * h8500-dis.c: Internationalised.
155 * i386-dis.c: Internationalised.
156 * m10200-dis.c: Internationalised.
157 * m10300-dis.c: Internationalised.
158 * m68k-dis.c: Internationalised.
159 * m88k-dis.c: Internationalised.
160 * mips-dis.c: Internationalised.
161 * ns32k-dis.c: Internationalised.
162 * opintl.h: Internationalised.
163 * ppc-opc.c: Internationalised.
164 * sparc-dis.c: Internationalised.
165 * v850-dis.c: Internationalised.
166 * v850-opc.c: Internationalised.
168 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
170 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
171 (asm_hash_table_entries): New variable.
172 (cgen_asm_init): Free asm_hash_table_entries.
173 (hash_insn_array,hash_insn_list): New functions.
174 (build_asm_hash_table): Use them. Hash macro insns as well.
175 (cgen_asm_lookup_insn): Update.
176 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
177 (dis_hash_table_entries): New variable.
178 (cgen_dis_init): Free dis_hash_table_entries.
179 (hash_insn_array,hash_insn_list): New functions.
180 (build_dis_hash_table): Use them. Hash macro insns as well.
181 (cgen_dis_lookup_insn): Update.
182 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
183 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
184 (cgen_macro_insn_count): New function.
185 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
186 All callers updated. Sanity check result of extract fn.
187 (@arch@_cgen_get_insn_operands): Change result type to void.
188 Delete args insn_value, length. New arg fields. All callers updated.
189 (@arch@_cgen_lookup_get_insn_operands): New function.
190 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
192 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
194 * i386-dis.c (OP_DSSI): Print segment override.
197 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
199 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
203 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
205 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
209 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
211 * vu0.h (vlqd, vlqi): Update per revised specs.
215 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
217 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
218 (vif_operands): Update.
219 (vif_get_unpackloc): Delete.
220 (state_vif_unpackloc{,_star_p}): Delete.
221 (dvp_opcode_init_parse): Update.
222 (vif_unpack_len_value): Avoid divide by zero.
226 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
228 * vu0.h: Specs changed for VCALLMSR bit pattern.
229 * mips-dis.c: (print_insn_arg) Matching change.
232 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
234 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
237 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
239 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
240 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
241 * configure.in: Define and substitute WIN32LDFLAGS and
243 * aclocal.m4: Rebuild with new libtool.
244 * configure, Makefile.in: Rebuild.
247 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
249 * vu0.h: Corrected bit pattern for VMAXI opcode.
252 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
254 * m32r-opc.c: Regenerate.
257 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
259 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
260 (dvp_expand_macro): Implement.
261 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
262 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
265 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
267 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
268 before trying to copy it.
269 * Makefile.in: Rebuild.
271 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
273 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
276 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
278 * m32r-opc.c: Fix bit patterns for SAT and SATB.
281 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
283 * ns32k-dis.c (bit_extract_simple): New function to extract bits
284 from an arbitrary valid buffer instead of fetching them on demand
286 (invalid_float): use bit_extract_simple() instead of bit_extract().
289 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
291 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
292 * m32r-opc.h: Add extra control registers.
295 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
297 From H.J. Lu <hjl@gnu.org>:
298 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
301 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
303 * Branched binutils 2.9.
306 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
308 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
309 disassembling last 4 bytes of a section.
312 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
314 Fix some gcc -Wall warnings:
315 * arc-dis.c (print_insn): Add casts to avoid warnings.
316 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
317 * d10v-dis.c (dis_long, dis_2_short): Likewise.
319 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
320 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
321 (parse_bc, parse_vfreg, parse_accdest): Likewise.
322 (parse_ffstreg, parse_vif_mode): Likewise.
324 * m10200-dis.c (disassemble): Likewise.
325 * m10300-dis.c (disassemble): Likewise.
326 * ns32k-dis.c (print_insn_ns32k): Likewise.
327 * ppc-opc.c (insert_ral, insert_ram): Likewise.
328 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
329 * cgen-opc.c (cgen_keyword_search_next): Likewise.
330 * d10v-dis.c (dis_long, dis_2_short): Likewise.
332 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
335 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
336 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
337 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
339 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
341 * tic80-dis.c (print_one_instruction): Likewise.
343 * w65-dis.c (print_operand): Likewise.
344 * z8k-dis.c (fetch_data): Likewise.
345 * a29k-dis.c: Add return type for find_byte_func_type.
346 * arc-opc.c: Include <stdio.h>. Remove declarations of
347 insert_multshift and extract_multshift.
349 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
351 (extract_value): Fully parenthesize expression.
354 * dvp-opc.c: Include <ctype.h>.
355 (print_sdest): Add default case to switch.
357 * h8500-dis.c (print_insn_h8500): Initialize local variables.
358 * h8500-opc.h (h8500_table): Fully bracket initializer.
359 * w65-opc.h (optable): Likewise.
360 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
361 * i386-dis.c (OP_E): Initialize local variables.
362 * m10200-dis.c (print_insn_mn10200): Likewise.
363 * mips-dis.c (print_insn_mips16): Likewise.
364 * sh-dis.c (print_insn_shx): Likewise.
365 * v850-dis.c (print_insn_v850): Likewise.
366 * ns32k-dis.c (print_insn_arg): Declare.
367 (get_displacement, invalid_float): Declare.
368 (list_search, sign_extend, flip_bytes): Declare return type.
369 (get_displacement): Likewise.
370 (print_insn_arg): Likewise. Make d int. Fix sprintf format
372 (print_insn_ns32k): Make i unsigned.
373 (invalid_float): Make static. Declare type of val.
374 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
375 on each for iteration.
376 * tic30-dis.c (get_indirect_operand): Likewise.
377 * z8k-dis.c (print_insn_z8001): Declare return type.
378 (print_insn_z8002): Likewise.
379 (unparse_instr): Fix sprintf format strings.
381 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
383 * mips-opc.c: Add "sync.l" and "sync.p".
386 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
388 * dvp-opc.c (extract_vif_datalen): Rewrite.
389 (vif_insn_len): Perform 0->max+1 conversion for direct length.
391 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
393 * dvp-dis.c (print_insn): Print unpack address in hex.
394 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
395 Don't skip over '*', just record it.
396 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
397 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
398 Don't skip over '*', just record it.
399 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
400 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
401 (vif_opcodes): Likewise.
402 (state_vif_{mpg,unpack}loc_star_p): New static locals.
403 (vif_macros,vif_macro_count): New globals.
404 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
405 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
406 (vif_get_wl_cl): New function.
407 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
410 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
412 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
413 default m68k variant to recognize.
415 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
416 (ctrl, cobr, mem, ea): Likewise.
417 (print_addr): Likewise. Remove cast.
418 (ea): Cast argument of print_addr to bfd_vma.
420 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
422 (cgen_parse_unsigned_integer): Likewise.
423 (cgen_parse_address): Likewise.
425 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
427 * i960-dis.c (ctrl): Add full braces to structure initialization.
428 (cobr, mem, reg): Likewise.
429 (ea): Correct parenthesization in expression.
431 * cgen-asm.c: Include <ctype.h>.
432 (build_asm_hash_table): Remove unused local variable i.
433 (cgen_parse_keyword): Add casts to avoid warnings.
435 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
436 symbol. Fix indentation.
437 (print_insn_little_arm): Likewise.
440 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
442 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
447 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
449 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
454 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
456 * dvp-opc.c (vif_operand_datalen_special): New global.
460 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
462 * vu0.h (vcallms): Use 'O' for call target operand.
463 * mips-dis.c (print_insn_arg): Handle 'O'.
466 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
468 * configure.in: Use AM_DISABLE_SHARED.
469 * aclocal.m4, configure: Rebuild with libtool 1.2.
472 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
474 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
479 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
481 These patches are courtesy of Jonathan Walton and Tony Thompson
482 (athompso@cambridge.arm.com).
484 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
487 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
488 both the offset and the label closest to the destination.
491 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
493 * vu0.h: New file with cop2/vu0 instructions.
494 * mips-opc.c: Include vu0.h.
495 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
497 (print_insn_mips): Do not emit a tab after an instruction if the
498 first arg is an instruction completer (&). If the next arg is an
499 escape character (%), then print the next arg verbatim.
500 * Makefile.am (mips-opc.lo): Depend on vu0.h
504 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
506 * dvp-opc.c (vif_opcodes): Add stcycl.
508 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
510 * dvp-dis.c (print_dma): Change length from 16 to 8.
513 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
515 * m32r-opc.h: Regenerate.
518 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
520 * dvp-opc.c (print_dest1): Print dest spec again.
521 (print_vfreg,print_accdest): Likewise.
522 (vif_unpack_len): Round result up to word boundary.
525 start-sanitize-vr4320
526 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
528 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
530 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
532 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
537 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
539 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
540 (print_insn): Do mask comparison on proper opcode word.
541 Print unsigned values in hex.
542 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
543 (parse_bc): Catch missing dest.
544 (parse_vfreg): Replace atoi call with strtol.
545 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
546 (parse_bcftreg,parse_ffstreg): Handle missing dest.
547 (extract_gif_eop): New function.
548 (gif_operands): Update eop entry.
549 (VGIFOP,VGIFNREGS): Fix calcs.
550 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
551 (gif_regs): Add entry for unused 11 case.
552 (print_gif_regs): Print empty list instead of nothing.
553 (extract_gif_nloop): Fix value calc.
554 (print_gif_nloop): Always print value, even if 0.
555 (insert_vif_wlcl,extract_vif_wlcl): New functions.
556 (vif_operands): Use them for wl,cl fields.
557 (state_vif_wl,state_vif_cl): New static locals.
558 (parse_vif_mode): Handle numeric args.
559 (vif_unpack_len_value,vif_unpack_len): New functions.
560 (vif_insn_len): Call vif_unpack_len.
563 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
565 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
567 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
569 * cgen-asm.in: Move insertion of generated routines to top of file.
570 (insert_normal): Add prototype. Delete `shift' arg.
571 * cgen-dis.in: Move insertion of generated routines to top of file.
572 (extract_normal): Add prototype. Delete `shift' arg.
573 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
574 (print_keyword): Add prototype. Fix type of `attrs' arg.
576 start-sanitize-vr4320
577 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
579 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
580 * mips-opc.c ("mac","dmac") : Added 4320 insns.
583 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
585 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
586 assume that info->symbols is non-empty.
588 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
590 * alpha-opc.c (cvtqs) There is no such thing.
591 (cvttq): Missing most of the /*d variants.
594 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
596 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
598 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
599 (r5900/msub.s): Takes three operands, not four. Fix opcode.
603 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
605 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
606 delayed branches or jumps.
610 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
612 * dvp-opc.c (vif_operands): Add unpack[u] support.
613 (vif_opcodes): Ditto.
614 (*_vif_imrubits): Renamed from *_vif_imrbits.
616 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
618 * dvp-dis.c (print_insn): Handle word number.
619 Handle mips address vs vu address.
620 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
621 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
622 ({insert,extract}_dma_addr): Fix word ofset.
623 ({insert,print}_gif_regs): Fix encode/decode.
626 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
628 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
630 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
631 * tic30-dis.c (print_branch): Likewise.
633 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
634 * dvp-dis.c (dvp_info_mach_type): New function.
635 (print_insn_dvp): Call it.
636 (print_vif): Return length of 4 if mpg or direct insn so following
637 insns get properly disabled.
638 (print_gif): Fix word order.
639 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
640 (gif_operands): Fix word order.
641 (gif_opcodes): Likewise.
642 ({insert,extract,print}_gif_regs): Likewise.
643 (gif_regs): Add new register number/name changes.
644 (dma_opcodes): Add dmarefe insn.
647 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
649 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
650 saved_symbol code as it is no longer needed.
652 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
654 * cgen-asm.c: Include symcat.h.
655 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
657 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
660 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
662 * dvp-opc.c (extra_dma_flags): Fix typos.
663 (dma_operands): Fix word numbers.
664 (dma_opcodes): Likewise.
665 ({insert,extract}_dma_flags): Likewise.
668 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
670 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
673 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
675 * dvp-dis.c (print_gif): Complete.
676 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
677 (state_gif_{nregs,regs,nloop}): New static locals.
679 (dvp_opcode_init_{parse,print}): Init gif state locals.
680 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
681 (vif_insn_len): Handle `unpack'.
682 ({insert,extract}_dma_flags): Complete.
686 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
688 * mips-opc.c (mula.s): Renamed from multa.s.
691 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
693 * m32r-opc.[ch]: Regenerate.
696 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
698 * dvp-opc.c (dma_operands): Rewrite.
699 (dma_operand_{count,addr}): New globals.
700 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
701 (insert_dma_addr): Insert value into insn.
702 (extract_dma_addr): Extract value from insn.
704 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
706 * dvp-dis.c (print_vu): Handle loi insns.
707 (print_insn): Likewise.
708 * dvp-opc.c (vu_lower_opcodes): Add "loi".
709 (vu_operands): Make LDEST1 a FAKE operand.
710 (parse_dest1): Allow elided argument.
711 (print_dest1): Don't print the argument.
713 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
715 * dvp-opc.c (parse_vfreg): Dest spec is optional.
716 (print_vfreg): Don't print dest spec.
717 (parse_accdest): Dest spec is optional.
718 (print_accdest): Don't print dest spec.
721 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
723 * Makefile.am (CGENFILES): Update.
724 * Makefile.in: Regenerate.
725 * cgen-asm.in (insert_normal): Result is error message now.
726 Validate value to be inserted.
727 (insert_insn_normal): Result is error message now.
728 (@arch@_cgen_assemble_insn): Update.
729 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
730 arguments. Don't perform validation here.
731 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
733 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
735 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
736 operand instance list.
737 * m32r-opc.c: Regenerate.
739 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
741 * Makefile.am (AUTOMAKE_OPTIONS): Define.
742 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
744 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
746 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
748 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
750 * configure.in: Get the version number from BFD.
751 * configure: Rebuild.
753 From H.J. Lu <hjl@gnu.org>:
754 * Makefile.am (libopcodes_la_LDFLAGS): Define.
755 * Makefile.in: Rebuild.
757 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
759 * m32r-opc.c: Regenerate.
760 * m32r-opc.h: Regenerate.
762 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
764 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
765 Ignore ALIAS insns if asked to.
766 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
767 * m32r-opc.c: Regenerate.
770 * dvp.opc.c: Nicely format opcode tables.
771 (vu_operands): New element UFLAGS.
772 (parse_uflags,print_uflags): New functions.
773 (vu_upper_opcodes): Add UFLAGS to all insns.
776 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
778 Fix rac to accept only a0:
779 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
780 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
781 Introduce OPERAND_GPR.
782 * d10v-dis.c (print_operand): Likewise.
784 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
786 * cgen-opc.in: New file.
787 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
788 * Makefile.am (CGENFILES): Add cgen-opc.in.
789 * Makefile.in: Regenerate.
791 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
792 (cgen_hw_lookup): Make result const.
794 * cgen-dis.in (*): Use PTR instead of void *.
795 (print_insn): Delete unused vars `i', `syntax'.
797 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
800 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
802 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
803 (vif_opcodes): Update renamed insns.
804 * dvp-dis.c (*): Likewise.
807 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
809 * configure, aclocal.m4: Rebuild with new libtool.
812 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
814 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
815 instructions use a PC relative branch, not absolute.
818 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
820 * configure.in: Set libtool_enable_shared rather than
821 libtool_shared. Remove diversion hack.
822 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
824 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
826 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
827 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
829 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
831 * tic30-dis.c: New file.
832 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
833 * configure.in: Handle bfd_tic30_arch.
834 * Makefile.am: Rebuild dependencies.
835 (CFILES): Add tic30-dis.c
836 (ALL_MACHINES): Add tic30-dis.lo.
837 * configure, Makefile.in: Rebuild.
840 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
842 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
843 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
844 macwhi-a and macwlo-a instructions.
848 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
850 * dvp-opc.c, fixed encoding of a bunch of instructions to
851 be consistent with the asmvu assembler (and inconsistent
852 with the specification).
854 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
856 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
857 in the opcode table. The pkemscalf instruction must come first.
859 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
861 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
864 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
866 * m32r-opc.h (HAVE_CPU_M32R): Define.
869 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
871 * dvp-dis.c, dvp-opc.c: New files.
872 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
873 * configure: Regenerate.
874 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
875 (dvp-dis.lo,dvp-opc.lo): Add rules for.
876 (mips-dis.lo): Compile with @archdefs@.
877 * Makefile.in: Regenerate.
878 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
879 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
882 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
884 * v850-opc.c (insertion routines): If both alignment and size is
885 wrong then report this.
887 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
889 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
890 Only recognize instructions for the current target_processor.
892 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
894 * d10v-dis.c (PC_MASK): Correct value.
895 (print_operand): If there's a reloc, don't calculate the
896 address because they could be in different sections.
898 start-sanitize-cygnus
899 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
901 * cgen.sh: Rewrite to be like simulator's version.
902 * Makefile.am (cgen): Update call to cgen.sh.
903 * Makefile.in: Regenerate
906 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
908 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
909 instruction after the 4650's "mul" instruction; nobody's using the
910 4010 these days. If object files someday indicate which processor
911 variant they're intended for, we can do a better job at this.
914 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
916 * mips-opc.c (c.lt.s): Add r5900 variant.
920 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
922 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
923 table provided entry size. Use CGEN_INSN_MNEMONIC.
924 (cgen_parse_keyword): Rewrite.
925 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
926 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
927 * cgen-opc.c: Clean up pass over `struct foo' usage.
928 (cgen_keyword_lookup_value): Handle "" entry.
929 (cgen_keyword_add): Likewise.
930 start-sanitize-cygnus
931 * Makefile.am: Add cgen support.
932 * Makefile.in: Regenerate.
933 * configure.in: Add cgen support.
934 * configure: Regenerate.
935 * aclocal.m4: Regenerate.
936 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
939 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
941 * mips-opc.c: Add FP_D to s.d instruction flags.
943 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
945 * m68k-opc.c (halt, pulse): Enable them on the 68060.
948 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
950 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
951 PC relative offset forms before the 15 bit forms. An assembler command
952 line option now chooses the default.
956 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
958 * mips-opc.c: Add many missing r5900 instructions.
962 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
964 * d30v-opc.c (d30v_opcode_table): Set new flags bits
965 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
968 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
970 * configure: Only build libopcodes shared if --enable-shared's value
971 was `yes', or was set to `*opcodes*'.
972 * aclocal.m4: Likewise.
973 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
974 original source of this bit of code. It's not clear what the best fix
978 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
980 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
983 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
985 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
986 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
987 offset forms before the 15 bit forms, to default to the long forms.
990 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
992 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
994 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
996 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
997 symbol if none is present.
998 (print_insn_big_arm): Prevent examination of stored symbol if
1001 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1003 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1005 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1007 * disassemble.c: Remove disasm_symaddr() function.
1009 * arm-dis.c: Use info->symbol instead of info->flags to determine
1010 if disassmbly should be in Thumb or Arm mode.
1012 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1014 * arm-dis.c: Add support for disassembling Thumb opcodes.
1015 (print_insn_thumb): New function.
1017 * disassemble.c (disasm_symaddr): New function.
1019 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1020 (thumb_opcodes): Table of Thumb opcodes.
1022 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1024 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1026 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1027 and 'v' as operand types.
1029 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1031 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1032 <olivier.carmona@di.epfl.ch>.
1033 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1034 which has a two word opcode with a one word argument.
1037 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1039 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1040 unsigned, not signed.
1041 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1044 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1046 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1047 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1048 (ftrv): Slay the cut-and-paste monster.
1050 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1052 * d10v-dis.c (print_operand):
1053 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1055 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1057 * d10v-opc.c (OPERAND_FLAG): Split into:
1058 (OPERAND_FFLAG, OPERAND_CFLAG) .
1062 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1064 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1065 field for all INSN_MACRO's.
1066 * mips16-opc.c: same
1068 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1070 * mips-opc.c (sync,cache): These are 3900 insns.
1072 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1074 sh-opc.h (sh_table): Remove ftst/nan.
1076 start-sanitize-vr5400
1077 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1079 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1080 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1082 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1086 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1088 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1089 Add tx49 insns and configury.
1092 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1094 * mips-opc.c (ffc, ffs): Fix mask.
1097 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1099 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1103 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1105 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1106 start-sanitize-vr5400
1107 Added VR5400 instructions.
1108 (N5): New cpu-id macro.
1110 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1112 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1114 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1115 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1117 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1119 * v850-dis.c (disassemble): Replace // with /* ... */
1121 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1123 * sparc-opc.c: Add wr & rd for v9a asr's.
1124 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1125 (v9a_asr_reg_names): New variable.
1126 Patch from David Miller <davem@vger.rutgers.edu>.
1128 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1130 * sparc-opc.c (v9notv9a): New insn type.
1131 (IMPDEP): Move to the end to not conflict with edge8 et al.
1132 Patch from David Miller <davem@vger.rutgers.edu>.
1134 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1136 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1138 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1140 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1142 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1144 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1145 of disassemble_info structure to determine if an overlay address
1146 has a matching symbol in low memory.
1148 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1149 new symbol_at_address_func field in disassemble_info structure.
1151 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1153 * v850-opc.c (extract_d22): Use signed arithmatic.
1155 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1157 * mips-opc.c: Three op mult is not an ISA insn.
1159 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1161 * mips-opc.c: Fix formatting.
1163 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1165 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1166 than assuming that char is signed. Explicitly sign extend 16 bit
1167 values, rather than assuming that short is 16 bits.
1168 (OP_sI, OP_J, OP_DIR): Likewise.
1170 start-sanitize-v850e
1171 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1173 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1177 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1179 * v850-opc.c: Fix typo in comment.
1181 * v850-dis.c (disassemble): Add test of processor type when
1182 determining opcodes.
1184 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1186 * configure.in: Use a diversion to set enable_shared before the
1187 arguments are parsed.
1188 * configure: Rebuild.
1190 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1192 * m68k-opc.c (TBL1): Use ! rather than `.
1193 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1195 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1197 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1199 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1201 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1204 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1205 * aclocal.m4: Rebuild with new libtool.
1206 * configure: Rebuild.
1208 start-sanitize-v850e
1209 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1211 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1214 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1216 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1218 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1220 * v850-opc.c (v850_opcodes): Further rearrangements.
1223 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1225 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1228 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1230 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1233 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1235 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1237 * mips16-opc.c: Added mips16 sdbbp.
1240 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1242 * v850-opc.c: Initialise processors field of v850_opcode structure.
1245 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1247 Merge changes from Martin Hunt:
1249 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1251 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1252 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1253 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1255 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1257 * d30v-dis.c (print_insn): First operand of d*i (delayed
1258 branch) instructions is relative.
1260 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1261 (d30v_operand_table): Add IMM6S3 type.
1262 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1264 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1265 and cmp instructions.
1267 * d30v-opc.c: Correct entries for repeat*, and sat*.
1268 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1269 types. Correct several formats.
1271 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1273 * d30v-opc.c (pre_defined_registers): Change control registers.
1275 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1276 SHORT_C2. Manual was incorrect.
1278 * d30v-dis.c (lookup_opcode): Return value now indicates
1279 if an opcode has a short and a long form. Used for deciding
1280 to append a ".s" or ".l".
1281 (print_insn): Append a ".s" to an instruction if it is
1282 the short form and ".l" if it is a long form. Do not append
1283 anything if the instruction has only one possible size.
1285 * d30v-opc.c: Change mulx2h to require an even register.
1286 New form: SHORT_A2; a SHORT_A form that needs an even
1287 register as the first operand.
1289 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1290 instruction was not being disassembled if there were an odd
1291 number of instructions.
1293 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1296 start-sanitize-v850e
1297 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1299 * v850-dis.c (disassemble): Improved display of register lists.
1302 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1304 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1305 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1306 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1307 fandnot1s, fandnot2s.
1309 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1311 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1313 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1315 * cgen-asm.c (cgen_parse_address): New argument resultp.
1316 All callers updated.
1317 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1319 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1321 * mn10200-dis.c (disassemble): PC relative instructions are
1322 relative to the next instruction, not the current instruction.
1324 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1326 * v850-dis.c (disassemble): Only signed extend values that are not
1327 returned by extract functions.
1328 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1330 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1332 * v850-opc.c: Update comments. Remove use of
1333 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1335 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1337 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1339 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1341 * configure: Rebuilt with latest devo autoconf for NT support.
1343 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1345 * v850-dis.c (disassemble): Use curly brace syntax for register
1348 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1349 where r0 is being used as a destination register.
1351 start-sanitize-v850e
1352 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1354 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1357 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1359 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1360 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1361 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1362 Add insns to access SGR and DBR.
1363 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1365 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1367 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1369 start-sanitize-v850e
1370 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1372 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1373 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1376 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1378 * configure (cgen_files): Add support for v850e target.
1379 * configure.in (cgen_files): Add support for v850e target.
1381 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1383 * configure (cgen_files): Add support for v850ea target.
1384 * configure.in (cgen_files): Add support for v850ea target.
1387 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1389 * configure.in (bfd_arc_arch): Add.
1390 * configure: Rebuild.
1391 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1392 * Makefile.in: Rebuild.
1393 * arc-dis.c, arc-opc.c: New files.
1394 * disassemble.c (ARCH_all): Define ARCH_arc.
1395 (disassembler): Add ARC support.
1397 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1399 start-sanitize-v850e
1400 * v850-dis.c (disassemble): Add support for v850EA instructions.
1402 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1403 (v850_opcodes): Add v850EA instructions.
1405 * v850-dis.c (disassemble): Add support for v850E instructions.
1407 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1408 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1409 insert_spe, extract_spe): New Functions.
1410 (v850_opcodes): Add v850E instructions.
1413 * v850-opc.c: Reorganised and re-layed out to improve readability
1416 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1418 * configure: Rebuild with autoconf 2.12.1.
1420 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1422 * aclocal.m4, configure: Rebuild with new automake patches.
1424 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1426 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1427 * acinclude.m4: Just include acinclude.m4 from BFD.
1428 * aclocal.m4, configure: Rebuild.
1430 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1432 * Makefile.am: New file, based on old Makefile.in.
1433 * acconfig.h: New file.
1434 * acinclude.m4: New file.
1435 * stamp-h.in: New file.
1436 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1437 Removed shared library handling; now handled by libtool. Replace
1438 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1439 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1440 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1441 handling in AC_OUTPUT.
1442 * dep-in.sed: Change .o to .lo.
1443 * Makefile.in: Now built with automake.
1444 * aclocal.m4: Now built with aclocal.
1445 * config.in, configure: Rebuild.
1447 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1449 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1451 start-sanitize-r5900
1452 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1454 * mips-opc.c: Fix coding of mtsa.
1457 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1459 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1461 * sparc-dis.c (sorted_opcodes): New static local.
1462 (struct opcode_hash): `opcode' is pointer to const element.
1463 (build_hash): First arg is now table of sorted pointers.
1464 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1465 (compare_opcodes): Update.
1467 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1469 * cgen-opc.c: #include <ctype.h>.
1470 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1471 Handle case insensitive hashing.
1472 (hash_keyword_value): Change type of `value' to unsigned int.
1474 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1476 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1477 precision FP, mark it as such. Likewise for double precision
1478 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1480 start-sanitize-r5900
1481 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1484 start-sanitize-r5900
1485 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1487 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1488 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1491 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1493 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1495 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1496 nesting depth when all the macros are expanded.
1498 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1500 * sparc-opc.c: The fcmp v9a instructions take an integer register
1501 as a destination, not a floating point register. From Christian
1502 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1504 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1506 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1507 syntax. From Roman Hodek
1508 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1510 * i386-dis.c (twobyte_has_modrm): Fix pand.
1512 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1514 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1516 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1518 * arm-dis.c: Add prototypes for arm_decode_shift and
1521 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1523 * mips-opc.c: Add r3900 insns.
1525 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1527 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1528 print delay slot instructions on the same line. When using a PC
1529 relative load, add a comment with the value being loaded if it can
1532 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1534 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1535 to pushS/popS for segment regs and byte constant so that
1536 pushw/popw printed when in 16 bit data mode.
1538 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1539 print cbtw, cwtd in 16 bit data mode.
1540 * i386-dis.c (putop): extra case W to support above.
1542 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1543 address size prefix in 16 bit address mode.
1545 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1547 * sh-dis.c: Reindent. Rename local variable fprintf to
1550 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1552 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1554 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1556 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1558 * mips16-opc.c (mip16_opcodes): same.
1560 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1562 * m68k-opc.c (moveb): Change $d to %d.
1564 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1566 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1567 (twobyte_has_modrm): Likewise.
1569 (OP_MMX, OP_EM, OP_MS): New static functions.
1571 * i386-dis.c: Revert patch of April 4. The output now matches
1574 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1576 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1579 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1581 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1583 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1585 * Makefile.in (install): Depend upon installdirs.
1586 (installdirs): New target.
1588 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1590 From Thomas Graichen <graichen@rzpd.de>:
1591 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1592 * configure: Rebuild.
1594 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1596 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1597 Delete string{,s}.h support.
1599 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1601 * cgen-asm.c (cgen_parse_operand_fn): New global.
1602 (cgen_parse_{{,un}signed_integer,address}): Update call to
1603 cgen_parse_operand_fn.
1604 (cgen_init_parse_operand): New function.
1605 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1606 from cgen_asm_init_parse.
1607 (m32r_cgen_assemble_insn): New operand `errmsg'.
1608 Delete call to as_bad, return error message to caller.
1609 (m32r_cgen_asm_hash_keywords): #if 0 out.
1611 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1613 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1615 [case 'J']: Fix typo in register name.
1617 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1619 * configure.in: Substitute SHLIB_LIBS.
1620 * configure: Rebuild.
1621 * Makefile.in (SHLIB_LIBS): New variable.
1622 ($(SHLIB)): Use $(SHLIB_LIBS).
1624 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1626 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1628 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1630 * disassemble.c (disassembler): Handle m32r.
1632 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1634 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1635 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1636 * Makefile.in (CFILES): Add them.
1637 (ALL_MACHINES): Add them.
1638 (dependencies): Regenerate.
1639 * configure.in (cgen_files): New variable.
1640 (bfd_m32r_arch): Add entry.
1641 * configure: Regenerate.
1643 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1645 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1646 * configure: Rebuild.
1648 * Makefile.in: Rebuild dependencies.
1650 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1652 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1655 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1657 * Branched binutils 2.8.
1659 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1661 * m10200-dis.c: Rename from mn10200-dis.c.
1662 * m10200-opc.c: Rename from mn10200-opc.c.
1663 * m10300-dis.c: Rename from mn10300-dis.c
1664 * m10300-opc.c: Rename from mn10300-opc.c.
1665 * Makefile.in: Update accordingly.
1667 * mips16-opc.c: Add mul and dmul macros.
1669 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1671 * makefile.vms: Update CFLAGS, add clean target.
1673 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1675 * mips-opc.c: Add "wait". From Ralf Baechle
1676 <ralf@gnu.ai.mit.edu>.
1678 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1679 * configure, config.in: Rebuild.
1680 * sysdep.h: Include <stdlib.h> if it exists.
1681 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1683 * Makefile.in: Rebuild dependencies.
1685 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1687 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1688 Andrew Bray <andy@madhouse.demon.co.uk>.
1690 * mips-opc.c: Add cast when setting mips_opcodes.
1692 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1694 * v850-dis.c (disassemble): Fix sign extension problem.
1695 * v850-opc.c (extract_d*): Fix sign extension problems to make
1696 disassembly calculate branch offsets correctly.
1698 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1700 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1702 * mips-opc.c: Add dctr and dctw.
1705 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1707 * d30v-dis.c (print_insn): Change the way signed constants
1710 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1712 * Makefile.in (BFD_H): New variable.
1713 (HFILES): New variable.
1714 (CFILES): Add all C files.
1715 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1716 Delete old dependencies, and build new ones.
1717 * dep-in.sed: New file.
1719 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1721 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1723 start-sanitize-coldfire
1724 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1726 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1729 end-sanitize-coldfire
1730 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1732 * mn10200-opc.c: Change "trap" to "syscall".
1733 * mn10300-opc.c: Add new "syscall" instruction.
1735 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1737 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1738 mulul insns on the coldfire.
1740 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1742 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1743 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1744 (print_insn_little_arm): Likewise.
1746 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1748 Based on patches from H.J. Lu <hjl@lucon.org>:
1749 * i386-dis.c (fetch_data): Add prototype.
1750 * m68k-dis.c (fetch_data): Add prototype.
1751 (dummy_print_address): Add prototype. Make static.
1752 * ppc-opc.c (valid_bo): Add prototype.
1753 * sparc-dis.c (build_hash_table): Add prototype.
1754 (is_delayed_branch, compute_arch_mask): Add prototypes.
1755 (print_insn_sparc): Make several local variables const.
1756 (compare_opcodes): Change arguments to const PTR. Add prototype.
1757 * sparc-opc.c (arg): Change name field to be const.
1758 (lookup_name, lookup_value): Add prototypes. Change table and
1759 name parameters to be const.
1760 (sparc_encode_asi): Change name parameter to be const.
1761 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1762 (sparc_encode_sparclet_cpreg): Likewise.
1763 (sparc_decode_asi): Change return type to be const.
1764 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1765 (sparc_decode_sparclet_cpreg): Likewise.
1767 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1769 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1770 Solaris doesn't like the combined options, and the -f is
1772 (stamp-tshlink, install): Likewise.
1774 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1776 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1779 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1781 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1783 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1785 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1788 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1790 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1792 start-sanitize-tic80
1793 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1795 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1797 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1799 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1802 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1804 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1805 floatformat_to_double to make portable.
1806 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1809 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1811 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1812 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1814 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1816 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1817 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1819 start-sanitize-tic80
1820 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1822 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1823 (OFF_SL_BR_SCALED): ... to this, and added the flag
1824 TIC80_OPERAND_BASEREL to the flags word.
1825 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1829 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1831 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1832 Change mips_opcodes from const array to a pointer,
1833 and change bfd_mips_num_opcodes from const int to int,
1834 so that we can increase the size of the mips opcodes table
1837 start-sanitize-tic80
1838 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1840 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1841 store BITNUM values in the table in one's complement form
1842 to match behavior when assembler is given a raw numeric
1843 value for a BITNUM operand.
1844 * tic80-dis.c (print_operand_bitnum): Ditto.
1848 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1850 * d30v-opc.c: Removed references to FLAG_X.
1853 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1855 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1858 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1860 * Makefile.in: Added d30v object files.
1861 * configure: (bfd_d30v_arch) Rebuilt.
1862 * configure.in: (bfd_d30v_arch) Added new case.
1863 * d30v-dis.c: New file.
1864 * d30v-opc.c: New file.
1865 * disassemble.c (disassembler) Add entry for d30v.
1868 start-sanitize-tic80
1869 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1871 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1872 representations for the floating point BITNUM values.
1874 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1876 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1877 in the table in one's complement form, as they appear in the
1879 (tic80_symbol_to_value): Use macros to access predefined
1881 (tic80_value_to_symbol): Ditto.
1882 (tic80_next_predefined_symbol): New function.
1883 * tic80-dis.c (print_operand_bitnum): Remove code that did
1884 one's complement for BITNUM values.
1887 start-sanitize-r5900
1888 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1890 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1893 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1895 * makefile.vms: Remove 8 bit characters. Update to latest
1898 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1900 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1902 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1904 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1905 (IMM24_PCREL): Likewise.
1907 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1909 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1910 address for an extended PC relative instruction that is not a
1913 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1915 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1918 start-sanitize-tic80
1919 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1921 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1922 (tic80_opcodes): Sort entries so that long immediate forms
1923 come after short immediate forms, making it easier for
1924 assembler to select the right one for a given operand.
1927 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1929 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1931 (print_insn_mips16): Likewise.
1933 start-sanitize-r5900
1934 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1936 * mips-opc.c: add r5900.
1939 start-sanitize-tic80
1940 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1942 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1943 a symbol class that restricts translation to just that
1944 class (general register, condition code, etc).
1946 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1948 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1949 and REG_DEST_E for register operands that have to be
1950 an even numbered register. Add REG_FPA for operands that
1951 are one of the floating point accumulator registers.
1952 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1953 (tic80_opcodes): Change entries that need even numbered
1954 register operands to use the new operand table entries.
1955 Add "or" entries that are identical to "or.tt" entries.
1958 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1960 * mips16-opc.c: Add new cases of exit instruction for
1962 * mips-dis.c (print_mips16_insn_arg): Display floating point
1963 registers in operands of exit instruction. Print `$' before
1964 register names in operands of entry and exit instructions.
1966 start-sanitize-tic80
1967 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1969 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1970 pairs for all predefined symbols recognized by the assembler.
1971 Also used by the disassembling routines.
1972 (tic80_symbol_to_value): New function.
1973 (tic80_value_to_symbol): New function.
1974 * tic80-dis.c (print_operand_control_register,
1975 print_operand_condition_code, print_operand_bitnum):
1976 Remove private tables and use tic80_value_to_symbol function.
1979 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1981 * d10v-dis.c (print_operand): Change address printing
1982 to correctly handle PC wrapping. Fixes PR11490.
1984 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1986 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1989 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1991 * mips-dis.c (print_insn_mips16): Set insn_info information.
1992 (print_mips16_insn_arg): Likewise.
1994 * mips-dis.c (print_insn_mips16): Better handling of an extend
1995 opcode followed by an instruction which can not be extended.
1997 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1999 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2000 coldfire moveb instruction to not allow an address register as
2001 destination. Although the documentation does not indicate that
2002 this is invalid, experiments uncovered unexpected behavior.
2003 Added a comment explaining the situation. Thanks to Andreas
2004 Schwab for pointing this out to me.
2006 start-sanitize-tic80
2007 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2009 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2010 entries are presorted so that entries with the same mnemonic are
2011 adjacent to each other in the table. Sort the entries for each
2012 instruction so that this is true.
2015 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2017 * m68k-dis.c: Include <libiberty.h>.
2018 (print_insn_m68k): Sort the opcode table on the most significant
2019 nibble of the opcode.
2021 start-sanitize-tic80
2022 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2024 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2025 "vsub", "vst", "xnor", and "xor" instructions.
2026 (V_a1): Renamed from V_a, msb of accumulator reg number.
2027 (V_a0): Add macro, lsb of accumulator reg number.
2029 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2031 * tic80-dis.c (print_insn_tic80): Broke excessively long
2032 function up into several smaller ones and arranged for
2033 the instruction printing function to be callable recursively
2034 to print vector instructions that have both a load and a
2035 math instruction packed into a single opcode.
2036 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2037 to explain why it comes after the other vector opcodes.
2040 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2042 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2043 move insns to handle immediate operands.
2045 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2047 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2048 fix operand mask in the "moveml" entries for the coldfire.
2050 start-sanitize-tic80
2051 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2053 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2054 New macros for building vector instruction opcodes.
2055 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2056 FMT_LI, which were unused. The field is now a flags field.
2057 Remove some opcodes that are possible, but illegal, such
2058 as long immediate instructions with doubles for immediate
2059 values. Add "vadd" and "vld" instructions.
2061 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2063 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2064 the order more logical. Move the shift alias instructions ("rotl",
2065 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2066 interspersed with the regular sr.x and sl.x instructions. Add
2067 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2068 "sub", "subu", "swcr", and "trap".
2070 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2072 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2073 (OFF_SL_PC): Renamed from OFF_SL.
2074 (OFF_SS_BR): New operand type for base relative operand.
2075 (OFF_SL_BR): New operand type for base relative operand.
2076 (REG_BASE): New operand type for base register operand.
2077 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2078 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2079 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2081 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2082 10 char field, padded with spaces on rhs, rather than a string
2083 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2084 than old TIC80_OPERAND_RELATIVE. Add support for new
2085 TIC80_OPERAND_BASEREL flag bit.
2087 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2089 * tic80-dis.c (print_insn_tic80): Print floating point operands
2091 * tic80-opc.c (SPFI): Add single precision floating point
2092 immediate operand type.
2093 (ROTATE): Add rotate operand type for shifts.
2094 (ENDMASK): Add for shifts.
2095 (n): Macro for the 'n' bit.
2096 (i): Macro for the 'i' bit.
2097 (PD): Macro for the 'PD' field.
2098 (P2): Macro for the 'P2' field.
2099 (P1): Macro for the 'P1' field.
2100 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2104 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2106 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2107 adding in current address for pc-relative operands.
2109 start-sanitize-tic80
2110 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2112 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2113 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2114 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2115 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2116 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2117 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2118 (REG_SCALED, LSI_SCALED): New operand types.
2119 (E): New macro for 'E' bit at bit 27.
2120 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2121 opcodes, including the various size flavors (b,h,w,d) for
2122 the direct load and store instructions.
2124 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2126 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2128 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2129 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2130 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2131 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2132 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2133 masks with "MASK_* & ~M_*" to get the M bit reset.
2134 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2136 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2138 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2139 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2140 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2142 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2143 CC, SICR, and LICR table entries.
2144 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2145 "bcnd", and "brcr" opcodes.
2148 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2150 * ppc-opc.c (powerpc_operands): Make comment match the
2151 actual fields (no shift field).
2152 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2153 start-sanitize-tic80
2154 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2155 partial implementation, work in progress.
2156 * tic80-opc.c (tic80_operands): Begin construction operands table.
2157 (tic80_opcodes): Continue populating opcodes table and start
2158 filling in the operand indices.
2159 (tic80_num_opcodes): Add this.
2162 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2164 * m68k-opc.c: Add #B case for moveq.
2166 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2168 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2169 before they are used.
2171 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2173 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2174 for "breakpoint" instruction.
2176 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2178 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2179 (dep): Use ALL_CFLAGS rather than CFLAGS.
2181 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2183 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2186 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2188 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2189 start-sanitize-tic80
2190 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2193 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2195 * mips16-opc.c: Add "abs".
2197 start-sanitize-tic80
2198 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2200 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2201 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2202 (disassembler): Add bfd_arch_tic80 support to set disassemble
2203 to print_insn_tic80.
2204 * tic80-dis.c (print_insn_tic80): Add stub.
2206 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2208 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2209 * configure: Regenerate with autoconf.
2210 * tic80-dis.c: Add file.
2211 * tic80-opc.c: Add file.
2214 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2216 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2218 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2220 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2221 (mn10200_opcodes): Use it for some logicals and btst insns.
2222 Add "break" and "trap" instructions.
2224 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2226 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2228 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2230 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2231 relative load or add now depends upon whether the instruction is
2234 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2236 * mn10200-dis.c: Finish writing disassembler.
2237 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2238 Fix mask for "jmp (an)".
2240 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2241 handle endianness issues for mn10300.
2243 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2245 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2247 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2248 instruction. Fix opcode field for "movb (imm24),dn".
2250 * mn10200-opc.c (mn10200_operands): Fix insertion position
2253 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2255 * mn10200-opc.c: Create mn10200 opcode table.
2256 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2257 but moving along nicely.
2259 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2261 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2263 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2265 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2266 specifiers for fmovem* instructions.
2268 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2270 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2272 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2274 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2277 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2279 * mn10300-opc.c: Add some comments explaining the various
2282 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2284 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2286 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2289 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2290 operand specifiers in fmovm* instructions.
2292 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2294 * ppc-opc.c (insert_li): Give an error if the offset has the two
2295 least significant bits set.
2297 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2299 * mips-dis.c (print_insn_mips16): Separate the instruction from
2300 the arguments with a tab, not a space.
2302 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2304 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2307 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2310 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2312 * configure: Rebuild with autoconf 2.12.
2314 Add support for mips16 (16 bit MIPS implementation):
2315 * mips16-opc.c: New file.
2316 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2317 (mips16_reg_names): New static array.
2318 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2319 after seeing a 16 bit symbol.
2320 (print_insn_little_mips): Likewise.
2321 (print_insn_mips16): New static function.
2322 (print_mips16_insn_arg): New static function.
2323 * mips-opc.c: Add jalx instruction.
2324 * Makefile.in (mips16-opc.o): New target.
2325 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2326 * configure: Rebuild.
2328 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2330 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2331 operand specifiers in *save, *restore and movem* instructions.
2333 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2336 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2337 register operands for immediate arithmetic, not, neg, negx, and
2338 set according to condition instructions.
2340 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2341 specifier of the effective-address operand in immediate forms of
2342 arithmetic instructions. The specifier for the immediate operand
2343 notes how and where the constant will be stored.
2345 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2347 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2350 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2353 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2355 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2357 * mn10300-dis.c (disassemble): Handle register lists.
2359 * mn10300-opc.c: Fix handling of register list operand for
2360 "call", "ret", and "rets" instructions.
2362 * mn10300-dis.c (disassemble): Print PC-relative and memory
2363 addresses symbolically if possible.
2364 * mn10300-opc.c: Distinguish between absolute memory addresses,
2365 pc-relative offsets & random immediates.
2367 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2369 (disassemble): Handle SPLIT and EXTENDED operands.
2371 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2373 * mn10300-dis.c: Rough cut at printing some operands.
2375 * mn10300-dis.c: Start working on disassembler support.
2376 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2378 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2380 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2382 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2384 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2386 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2388 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2389 register argument is calls and jmp instructions.
2391 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2393 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2394 getx operand. Fix opcode for mulqu imm,dn.
2396 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2398 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2399 in MN10300_OPERAND_SPLIT operands for how many bits
2400 appear in the basic insn word. Add IMM32_HIGH24,
2401 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2402 (mn10300_opcodes): Use new operands as needed.
2404 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2405 for bset, bclr, btst instructions.
2406 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2408 * mn10300-opc.c (mn10300_operands): Remove many redundant
2409 operands. Update opcode table as appropriate.
2410 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2411 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2413 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2415 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2416 operands (for indexed load/stores). Fix bitpos for DI
2417 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2418 few instructions that insert immediates/displacements in the
2419 middle of the instruction. Add IMM8E for 8 bit immediate in
2420 the extended part of an instruction.
2421 (mn10300_operands): Use new opcodes as appropriate.
2423 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2425 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2426 sequential so the assembler never parallelizes it with
2429 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2431 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2432 a data/address register that appears in register field 0
2433 and register field 1.
2434 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2436 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2438 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2439 standard disassembly.
2441 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2442 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2443 Recategorize PALcode instructions.
2445 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2447 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2449 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2451 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2452 there are no operand types.
2454 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2456 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2458 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2460 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2462 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2464 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2466 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2467 and sst.w instructions.
2469 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2472 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2474 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2477 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2479 * ppc-opc.c (PPCPWR2): Define.
2480 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2483 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2485 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2486 field for movhu instruction.
2488 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2489 cast value to "long" not "signed long" to keep hpux10
2492 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2494 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2497 * mn10300-opc.c (FMT*): Remove definitions.
2499 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2500 for shift-by-register opcodes.
2502 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2503 into [AD][MN][01] for encoding the position of the register
2506 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2508 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2509 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2511 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2513 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2514 Fix various typos. Add "PAREN" operand.
2515 (MEM, MEM2): Define.
2516 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2517 operands. Fix several typos.
2519 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2522 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2524 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2525 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2527 (mn10300_opcodes): Break opcode format out into its own field.
2528 Update many operand fields to deal with signed vs unsigned
2529 issues. Fix one or two typos in the "mov" instruction
2530 opcode, mask and/or operand fields.
2532 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2534 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2535 m68851 wasn't reset.
2537 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2539 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2540 all opcodes. Very rough cut at operands for all opcodes.
2542 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2545 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2547 * mn10200-opc.c, mn10300-opc.c: New files.
2548 * mn10200-dis.c, mn10300-dis.c: New files.
2549 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2550 * disassemble.c: Break mn10x00 support into 10200 and 10300
2552 * configure.in: Likewise.
2553 * configure: Rebuilt.
2555 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2557 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2559 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2561 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2563 * disassemble (ARCH_mn10x00): Define.
2564 (disassembler): Handle bfd_arch_mn10x00.
2565 * configure.in: Recognize bfd_mn10x00_arch.
2566 * configure: Rebuilt.
2568 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2570 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2571 accordingly. Don't declare functions using op_rtn.
2573 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2575 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2576 params to be more standard.
2577 * (disassemble): Print absolute addresses and symbolic names for
2578 branch and jump targets.
2579 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2581 * (v850_opcodes): Add breakpoint insn.
2583 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2585 * m68k-opc.c: Move the fmovemx data register cases before the
2586 other cases, so that they get recognized before the data register
2587 does gets treated as a degenerate register list.
2589 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2591 * mips-opc.c: Add a case for "div" and "divu" with two registers
2592 and a destination of $0.
2594 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2596 * mips-dis.c (print_insn_arg): Add prototype.
2597 (_print_insn_mips): Ditto.
2599 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2601 * mips-dis.c (print_insn_arg): Print condition code registers as
2604 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2606 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2608 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2610 * v850-dis.c (disassemble): Make static. Provide prototype.
2612 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2614 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2617 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2619 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2620 ']' characters into the output stream.
2621 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2622 Add "memop" field to all opcodes (for the disassembler).
2623 Reorder opcodes so that "nop" comes before "mov" and "jr"
2624 comes before "jarl".
2626 * v850-dis.c (print_insn_v850): Fix typo in last change.
2628 * v850-dis.c (print_insn_v850): Properly handle disassembling
2629 a two byte insn at the end of a memory region when the memory
2630 region's size is only two byte aligned.
2632 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2634 * v850-dis.c (v850_reg_names): Define.
2635 (v850_sreg_names, v850_cc_names): Likewise.
2636 (disassemble): Very rough cut at printing operands (unformatted).
2638 * v850-opc.c (BOP_MASK): Fix.
2639 (v850_opcodes): Fix mask for jarl and jr.
2641 * v850-dis.c: New file. Skeleton for disassembler support.
2642 * Makefile.in Remove v850 references, they're not needed here.
2643 * configure.in: Add v850-dis.o when building v850 toolchains.
2644 * configure: Rebuilt.
2645 * disassemble.c (disassembler): Call v850 disassembler.
2647 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2648 (insert_d8_6, extract_d8_6): New functions.
2649 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2650 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2652 (IF4A, IF4B): Use "D7" instead of "D7S".
2653 (IF4C, IF4D): Use "D8_7" instead of "D8".
2654 (IF4E, IF4F): New. Use "D8_6".
2655 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2656 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2658 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2659 (v850_operands): Change D16 to D16_15, use special insert/extract
2660 routines. New new D16 that uses the generic insert/extract code.
2661 (IF7A, IF7B): Use D16_15.
2662 (IF7C, IF7D): New. Use D16.
2663 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2665 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2666 message. Issue an error if the branch offset is odd.
2668 * v850-opc.c: Add notes about needing special insert/extract
2669 for all the load/store insns, except "ld.b" and "st.b".
2671 * v850-opc.c (insert_d22, extract_d22): New functions.
2672 (v850_operands): Use insert_d22 and extract_d22 for
2674 (insert_d9): Fix range check.
2676 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2678 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2679 and set bits field to D9 and D22 operands.
2681 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2683 * v850-opc.c (v850_operands): Define SR2 operand.
2684 (v850_opcodes): "ldsr" uses R1,SR2.
2686 * v850-opc.c (v850_opcodes): Fix opcode specs for
2687 sld.w, sst.b, sst.h, sst.w, and nop.
2689 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2691 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2692 end of the opcode table.
2694 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2696 * d10v-opc.c (pre_defined_registers): Added register pairs,
2697 "r0-r1", "r2-r3", etc.
2699 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2701 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2702 Create I16U for an unsigned 16bit mmediate operand.
2703 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2705 * v850-opc.c (v850_operands): Define EP operand.
2706 (IF4A, IF4B, IF4C, IF4D): Use EP.
2708 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2709 with immediate operand, "movhi". Tweak "ldsr".
2711 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2712 correct. Get sld.[bhw] and sst.[bhw] closer.
2714 * v850-opc.c (v850_operands): "not" is a two byte insn
2716 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2718 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2720 * v850-opc.c (two): Get order of words correct.
2722 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2724 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2725 register source and destination operands.
2726 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2728 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2729 same thinko in "trap" opcode.
2731 * v850-opc.c (v850_opcodes): Add initializer for size field
2734 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2735 Add D8 for 8-bit unsigned field in short load/store insns.
2736 (IF4A, IF4D): These both need two registers.
2737 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2738 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2739 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2740 for "ldsr" and "stsr".
2741 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2744 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2745 short store word (sst.w).
2747 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2749 * v850-opc.c (v850_operands): Added insert and extract fields,
2750 pointers to functions that handle unusual operand encodings.
2752 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2754 * v850-opc.c (v850_opcodes): Enable "trap".
2756 * v850-opc.c (v850_opcodes): Fix order of displacement
2757 and register for "set1", "clr1", "not1", and "tst1".
2759 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2761 * v850-opc.c (v850_operands): Add "B3" support.
2762 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2765 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2767 * v850-opc.c: Close unterminated comment.
2769 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2771 * v850-opc.c (v850_operands): Add flags field.
2772 (v850_opcodes): add move opcodes.
2774 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2776 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2777 * configure: (bfd_v850v_arch) Add new case.
2778 * configure.in: (bfd_v850_arch) Add new case.
2779 * v850-opc.c: New file.
2781 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2783 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2785 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2787 * d10v-opc.c: Add additional information to the opcode
2788 table to help determinine which instructions can be done
2791 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2793 * mpw-make.sed: Update editing of include pathnames to be
2796 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2798 * arm-opc.h: Added "bx" instruction definition.
2800 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2802 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2804 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2806 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2808 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2810 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2812 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2814 * makefile.vms: Update for alpha-opc changes.
2816 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2818 * i386-dis.c (print_insn_i386): Actually return the correct value.
2819 (ONE, OP_ONE): #ifdef out; not used.
2821 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2823 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2824 Changed subi operand type to treat 0 as 16.
2826 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2828 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2831 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2833 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2834 memory transfer instructions. Add new format string entries %h and %s.
2835 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2838 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2840 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2841 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2843 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2845 * alpha-dis.c (print_insn_alpha_osf): Remove.
2846 (print_insn_alpha_vms): Remove.
2847 (print_insn_alpha): Make globally visible. Chose the register
2848 names based on info->flavour.
2849 * disassemble.c: Always return print_insn_alpha for the alpha.
2851 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2853 * d10v-dis.c (dis_long): Handle unknown opcodes.
2855 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2857 * d10v-opc.c: Changes to support signed and unsigned numbers.
2858 All instructions with the same name that have long and short forms
2859 now end in ".l" or ".s". Divs added.
2860 * d10v-dis.c: Changes to support signed and unsigned numbers.
2862 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2864 * d10v-dis.c: Change all functions to use info->print_address_func.
2866 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2868 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2869 move ccr/sr insns more strict so that the disassembler only
2870 selects them when the addressing mode is data register.
2872 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2873 * d10v-opc.c (pre_defined_registers): Declare.
2874 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2875 to pick a better name for the registers.
2877 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2879 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2880 operands for fexpand and fpmerge. From Christian Kuehnke
2881 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2883 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2885 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2886 print routine. Take new regnames and cpumask arguments.
2887 Kill the environment variable nonsense.
2888 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2889 (print_insn_alpha_vms): New function. Do VMS style regnames.
2890 * disassemble.c (disassembler): Test bfd flavour to pick
2891 between OSF and VMS routines. Default to OSF.
2893 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2895 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2896 * configure: Rebuild.
2897 * Makefile.in (install): Use @INSTALL_SHLIB@.
2899 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2901 * configure: (bfd_d10v_arch) Add new case.
2902 * configure.in: (bfd_d10v_arch) Add new case.
2903 * d10v-dis.c: New file.
2904 * d10v-opc.c: New file.
2905 * disassemble.c (disassembler) Add entry for d10v.
2907 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2909 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2910 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2912 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2914 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2915 distinguish between variants of the instruction set.
2916 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2917 distinguish between variants of the instruction set.
2919 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2921 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2922 the 8086 instruction set.
2923 * i386-dis.c: General cleanups. Make most things static. Add
2924 prototypes. Get rid of static variables aflags and dflags. Pass
2925 them as args (to almost everything).
2927 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2929 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2931 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2933 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2934 if the next arg is marked with SRC_IN_DST. Gross.
2936 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2937 we're looking for and find EXR.
2939 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2940 if we're looking for KBIT and we don't find it.
2942 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2945 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2946 3bit immediate operands.
2948 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2950 * Released binutils 2.7.
2952 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2953 <kkaempf@progis.ac-net.de>.
2955 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2957 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2959 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2961 * sparc-dis.c (print_insn_sparclite): New routine to print
2962 sparclite instructions.
2964 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2966 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2968 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2970 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2971 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2972 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2974 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2976 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2977 Use autoconf-set values.
2978 (docdir, oldincludedir): Removed.
2979 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2981 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2983 * alpha-opc.c: New file.
2984 * alpha-opc.h: Remove.
2985 * alpha-dis.c: Complete rewrite to use new opcode table.
2986 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2987 * configure: Rebuild with autoconf 2.10.
2988 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2989 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2991 (alpha-opc.o): New target.
2993 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2995 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2996 Set imm_added_to_rs1 even if the source and destination register
2999 * sparc-opc.c: Add some two operand forms of the wr instruction.
3001 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3003 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3006 * disassemble.c (disassembler): Handle H8/S.
3007 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3009 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3011 * sparc-opc.c: Add beq/teq as aliases for be/te.
3013 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3014 <sergei@msil.sps.mot.com>.
3016 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3018 * makefile.vms: New file.
3020 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3022 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3024 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3027 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3029 * i386-dis.c (OP_OFF): Call append_prefix.
3031 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3033 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3034 unsigned long to silence a warning from the Solaris PowerPC
3037 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3039 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3041 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3043 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3045 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3046 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3047 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3048 cpush, cpusha, cpull sparclet insns.
3050 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3052 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3054 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3056 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3057 Set F_FLOAT on other floating point instructions.
3059 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3061 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3063 (powerpc_opcodes): Add 860/821 specific SPRs.
3065 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3067 * configure.in: Permit --enable-shared to specify a list of
3068 directories. Set and substitute BFD_PICLIST.
3069 * configure: Rebuild.
3070 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3071 uses. Set to @BFD_PICLIST@.
3073 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3075 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3076 not "abs", which may be needed for the absolute in something
3077 like btst #0,@10:8. Print L_3 immediates separately from other
3078 immediates. Change ABSMOV reference to ABS8MEM.
3080 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3082 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3083 (current_arch_mask): New static global.
3084 (compute_arch_mask): New static function.
3085 (print_insn_sparc): Delete sparc_v9_p. New static local
3086 current_mach. Resort opcode table if current_mach changes.
3087 Generalize "insn not supported" test.
3088 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3089 Delete test for v9/!v9.
3090 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3092 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3093 (brfcx): Renamed to FBRX.
3094 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3095 coprocessor mnemonics are not supported on the sparclet).
3096 (condf): Renamed to CONDF.
3097 (SLCBCC2): Delete F_ALIAS flag.
3099 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3101 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3102 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3104 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3106 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3107 that the shared library version number is set correctly.
3109 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3111 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3112 Miles Bader <miles@gnu.ai.mit.edu>.
3113 * configure: Rebuild.
3115 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3117 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3120 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3122 * configure: Rebuild with autoconf 2.8.
3124 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3126 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3127 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3129 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3131 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3132 since they appear as targets in Makefile.in.
3133 * configure: Rebuild.
3135 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3137 * mpw-make.sed: Edit out shared library support bits.
3139 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3141 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3142 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3143 (sparc_opcodes): Add sparclet insns.
3144 (sparclet_cpreg_table): New static local.
3145 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3146 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3148 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3150 * i386-dis.c (index16): New static variable.
3151 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3153 (OP_indirE): Return result of OP_E.
3154 (OP_E): Check for 16 bit addressing mode, and disassemble
3155 correctly. Optimised 32 bit case a little. Don't print
3156 "(base,index,scale)" when sib specifies only an offset.
3158 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3160 * configure.in: Set and substitute SHLIB_DEP.
3161 * configure: Rebuild.
3162 * Makefile.in (SHLIB_DEP): New variable.
3163 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3164 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3165 COMMON_SHLIB, add them to piclist with appropriate modifications.
3166 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3167 here: just use piclist.
3169 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3171 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3172 (print_insn_sparc): Rewrite v9/not-v9 tests.
3173 (compare_opcodes): Likewise.
3174 * sparc-opc.c (MASK_<ARCH>): Define.
3175 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3176 (sparclet,v6notv9): Define.
3177 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3178 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3180 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3182 * configure.in: Call AC_PROG_CC before configure.host.
3183 * configure: Rebuild.
3185 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3187 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3189 * i386-dis.c (onebyte_has_modrm): New static array.
3190 (twobyte_has_modrm): New static array.
3191 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3193 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3195 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3198 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3200 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3203 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3205 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3206 m68010up, not just m68020up | cpu32.
3208 * Makefile.in (SONAME): New variable.
3209 ($(SHLINK)): Make a link to the transformed name, as well.
3210 (stamp-tshlink): New target.
3211 (install): Skip stamp-tshlink during install.
3213 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3215 * configure.in: Call AC_ARG_PROGRAM.
3216 * configure: Rebuild.
3217 * Makefile.in (program_transform_name): New variable.
3218 (install): Transform library name before installing it.
3220 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3222 * i960-dis.c (mem): Add HX dcinva instruction.
3224 Support for building as a shared library, based on patches from
3225 Alan Modra <alan@spri.levels.unisa.edu.au>:
3226 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3227 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3228 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3229 * configure: Rebuild.
3230 * Makefile.in (ALLLIBS): New variable.
3231 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3232 (COMMON_SHLIB, SHLINK): New variables.
3233 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3234 (STAGESTUFF): Remove variable.
3235 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3236 (stamp-piclist, piclist): New targets.
3237 ($(SHLIB), $(SHLINK)): New targets.
3238 ($(OFILES)): Depend upon stamp-picdir.
3239 (disassemble.o): Build twice if PICFLAG is set.
3240 (MOSTLYCLEAN): Add pic/*.o.
3241 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3242 (distclean): Remove pic and stamp-picdir.
3243 (install): Install shared libraries.
3244 (stamp-picdir): New target.
3246 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3248 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3249 Print unknown instruction as "unknown", rather than in hex.
3251 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3253 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3255 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3257 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3259 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3261 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3262 when necessary. From Ulrich Drepper
3263 <drepper@myware.rz.uni-karlsruhe.de>.
3265 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3267 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3268 sparc_num_opcodes. Update architecture enum values.
3269 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3270 (sparc_opcode_lookup_arch): New function.
3271 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3272 (sparc_opcodes): Add v9a shutdown insn.
3274 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3276 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3277 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3279 (print_insn_sparc64): Deleted.
3280 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3283 * sparc-opc.c (architecture_pname): Add v9a.
3285 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3287 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3288 incorrectly defined as 0x16 when it should be 0x15.
3289 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3290 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3291 excb (exception barrier) which is defined in the Alpha
3292 Architecture Handbook version 2.
3293 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3294 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3295 disassembled as or, for example.
3297 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3299 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3300 (_print_insn_mips): Change i from int to unsigned int.
3302 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3304 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3305 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3307 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3309 * i386-dis.c: Added Pentium Pro instructions.
3311 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3313 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3316 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3318 * sh-opc.h (sh_nibble_type): Added REG_B.
3319 (sh_arg_type): Added A_REG_B.
3320 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3322 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3324 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3326 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3328 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3330 * Makefile.in (distclean): Remove stamp-h. From Ronald
3331 F. Guilmette <rfg@monkeys.com>.
3333 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3335 From David Mosberger-Tang <davidm@azstarnet.com>:
3336 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3339 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3341 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3342 (sh_table): Added many SH3 opcodes.
3343 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3345 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3347 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3348 (subco,subco.): Mark this PPC, not PPCCOM.
3350 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3352 * configure: Rebuild with autoconf 2.7.
3354 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3356 * configure: Rebuild with autoconf 2.6.
3358 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3360 * configure.in: Sort list of architectures. Accept but do nothing
3361 for alliant, convex, pyramid, romp, and tahoe.
3363 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3365 * a29k-dis.c (print_special): Change num to unsigned int.
3367 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3369 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3372 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3374 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3375 * configure: Rebuilt.
3377 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3379 * configure.in: Add case for bfd_i860_arch.
3380 * configure: Rebuild.
3382 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3384 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3385 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3386 (NEXTDOUBLE): Likewise.
3387 (print_insn_m68k): Don't match fmoveml if there is more than one
3388 register in the list.
3389 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3391 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3393 * m68k-opc.c: Use #W rather than #w.
3394 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3396 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3398 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3399 and likewise for all the dbxx opcodes.
3401 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3403 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3405 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3407 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3408 the VR4100 specific instructions to the mips_opcodes structure.
3410 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3412 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3413 ugly Metrowerks bug in CW6, is fixed in CW7.
3415 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3417 * ppc-opc.c (whole file): Add flags for common/any support.
3419 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3421 * Makefile.in (BISON): Remove macro.
3422 (FLAGS_TO_PASS): Remove BISON.
3424 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3426 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3428 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3429 instructions that take no args by looking at the match mask.
3430 (print_insn_arg): Always print "%" before register names.
3431 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3432 [case '_']: Don't print "@#" before address.
3433 [case 'J']: Use "%s" as format string, not register name.
3434 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3436 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3438 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3441 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3443 From David Mosberger-Tang <davidm@azstarnet.com>
3445 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3446 (alpha_insn_set): added definitions for VAX floating point
3447 instructions (Unix compilers don't generate these, but handcoded
3448 assembly might still use them).
3450 * alpha-dis.c (print_insn_alpha): added support for disassembling
3451 the miscellaneous instructions in the Alpha instruction set.
3453 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3455 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3456 no longer create sysdep.h, sed ppc-opc.c to work around a
3457 serious Metrowerks C bug.
3458 * mpw-make.in: Remove.
3459 * mpw-make.sed: New file, used by mpw-configure to edit
3460 Makefile.in into an MPW makefile.
3462 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3464 * Makefile.in (maintainer-clean): New synonym for realclean.
3466 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3468 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3469 which use '0', '1', and '2' instead. Specify the proper size for
3470 a pmove immediate operand. Correct the pmovefd patterns to be
3471 moves to a register, not from a register.
3472 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3474 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3476 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3477 %psr, %wim, %tbr as F_NOTV9.
3479 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3481 * Makefile.in (Makefile): Just rebuild Makefile when running
3483 (config.h, stamp-h): New targets.
3484 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3485 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3486 rebuilding config.h.
3487 * configure: Rebuild.
3489 * mips-opc.c: Change unaligned loads and stores with "t,A"
3490 operands to use "t,A(b)".
3492 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3494 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3496 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3498 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3499 until 3 instead of until 2.
3501 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3503 * Makefile.in (ALL_CFLAGS): Define.
3504 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3505 (MOSTLYCLEAN): Add config.log.
3506 (distclean): Don't remove config.log.
3507 * configure.in: Substitute HDEFINES.
3508 * configure: Rebuild.
3510 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3512 * sh-opc.h (sh_arg_type): Add F_FR0.
3513 (sh_table, case fmac): Add F_FR0 as first argument.
3515 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3517 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3519 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3521 * sparc-dis.c: Remove all references to NO_V9.
3523 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3525 * aclocal.m4: Just include ../bfd/aclocal.m4.
3526 * configure: Rebuild.
3528 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3530 * sparc-dis.c (X_DISP19): Define.
3531 (print_insn, case 'G'): Use it.
3532 (print_insn, case 'L'): Sign extend displacement.
3534 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3536 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3537 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3538 host_makefile_frag or frags.
3539 * aclocal.m4: New file.
3540 * configure: Rebuild.
3541 * Makefile.in (INSTALL): Set to @INSTALL@.
3542 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3543 (INSTALL_DATA): Set to @INSTALL_DATA@.
3545 (AR_FLAGS): Set to rc rather than qc.
3546 (CC): Define as @CC@.
3547 (CFLAGS): Set to @CFLAGS@.
3548 (@host_makefile_frag@): Remove.
3549 (config.status): Remove dependency upon @frags@.
3551 * configure.in: ../bfd/config.bfd now just sets shell variables.
3552 Use them rather than looking through target Makefile fragments.
3553 * configure: Rebuild.
3555 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3557 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3559 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3561 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3562 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3565 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3566 (lookup_{name,value}): New functions.
3567 (prefetch_table): New static local.
3568 (sparc_{encode,decode}_prefetch): New functions.
3569 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3571 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3573 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3576 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3578 * sh-dis.c: Correct comment on first line of file.
3580 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3582 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3584 * sparc-opc.c (asi, membar): New static locals.
3585 (sparc_{encode,decode}_{asi,membar}): New functions.
3586 (sparc_opcodes, membar insn): Fix.
3587 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3588 Support decoding of membar masks.
3591 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3593 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3595 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3597 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3598 and likewise for the other branches. Add bhs as an alias for bcc,
3599 and likewise for the size variants. Add dbhs as an alias for
3602 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3604 * sh-opc.h (FP sts instructions): Update to match reality.
3606 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3608 * m68k-dis.c: (fpcr_names): Add % before all register names.
3609 (reg_names): Likewise.
3610 (print_insn_arg): Don't explicitly print % before register names.
3611 Add % before register names in static array names. In case 'r',
3612 print data registers as `@(Dn)', not `Dn@'. When printing a
3613 memory address, don't print @# before it.
3614 (print_indexed): Change base_disp and outer_disp from int to
3615 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3616 syntax. Sign extend 8 byte displacement correctly.
3617 (print_base): Print using MIT syntax. Print zpc when appropriate.
3618 Change parameter disp from int to bfd_vma.
3620 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3623 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3625 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3626 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3627 * sh-opc.h (sh_arg_type): Add new operand types.
3628 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3630 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3632 * Makefile.in (distclean): Remove generated file config.h.
3634 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3636 * Makefile.in (distclean): Remove generated file config.h.
3638 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3640 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3642 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3644 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3645 rather than numopcodes. Use m68k_opcodes rather than removed
3646 opcode function. Don't check F_ALIAS.
3647 (print_insn_arg): Change first parameter to be const char *.
3648 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3649 (m68k-opc.o): New target.
3650 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3651 * configure: Rebuild.
3653 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3655 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3656 (opcode_bits, opcode_hash_table): New variables.
3657 (opcodes_initialized): Renamed from opcodes_sorted.
3658 (build_hash_table): New function.
3659 (is_delayed_branch): Use hash table.
3660 (print_insn): Renamed from print_insn_sparc, made static.
3661 Build and use hash table. If !sparc64, ignore sparc64 insns,
3662 and vice-versa if sparc64.
3663 (print_insn_sparc, print_insn_sparc64): New functions.
3664 (compare_opcodes): Move sparc64 opcodes to end.
3665 Print commutative insns with constant second.
3666 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3668 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3670 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3671 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3672 avoids printing a delay slot in a delay slot.
3673 * sh-opc.h (sh_table): Fully bracket last entry.
3675 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3677 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3679 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3681 * configure.in: Get host_makefile_frag from ${srcdir}.
3683 * configure.in: Autoconfiscated. Check for string[s].h. Create
3684 config.h from config.in. Don't set up sysdep.h link.
3685 * sysdep.h: New file.
3686 * configure, config.in: New files, generated from configure.in.
3687 * Makefile.in: Updated to be processed autoconf-style.
3688 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3689 (Makefile): Depend on config.status.
3690 (config.status): New rule.
3691 * configure.bat: Update Makefile substitutions.
3693 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3695 * mips-opc.c (L1): Define.
3696 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3697 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3700 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3702 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3703 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3704 have multiple add units but only a single logical unit.
3706 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3707 shifted by 18, without any insertion or extraction function.
3708 (insert_cr, extract_cr): Remove.
3710 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3712 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3715 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3717 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3718 * sh-opc.h: Add copyright.
3720 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3722 * Makefile.in (crunch-m68k): Delete extra target accidentally
3723 checked in a while ago.
3725 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3727 * sh-opc.h (sh_table): Add SH3 support.
3729 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3731 * sh-opc.h: Added bsrf and braf.
3733 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3735 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3736 bogus [ls]fm{ea,fd} patterns.
3738 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3739 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3740 initialize it from memory. Make function static.
3741 (print_insn_{big,little}_arm): New functions.
3742 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3743 the correct endianness.
3745 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3747 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3750 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3752 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3753 17th, so that it builds again using GCC as the compiler.
3755 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3757 * mips-dis.c (print_insn_little_mips): Cast return value from
3758 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3759 expects an unsigned long, and that might be fewer words of
3760 argument storage (e.g., if bfd_vma is long long on a 32-bit
3762 (print_insn_big_mips): Likewise with bfd_getb32 value.
3763 (_print_insn_mips): Now static.
3765 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3767 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3768 gcc memory hog problem with initializer is fixed.
3770 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3772 Merge in support for Mac MPW as a host.
3773 (Old change descriptions retained for informational value.)
3775 * mpw-config.in (archname): Compute from the config.
3776 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3778 * mpw-config.in (target_arch): Compute from canonical target.
3779 (m68k, mips, powerpc, sparc): Add architectures.
3780 * mpw-make.in (disassemble.c.o): Add.
3781 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3783 * mpw-config.in (BFD_MACHINES): Set to a default value.
3784 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3786 * mpw-make.in (CSEARCH): Add extra-include to search path.
3788 * mpw-config.in (varargs.h): Don't create.
3789 (sysdep.h): Create using forward-include.
3790 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3792 * mpw-config.in: New file, MPW version of configure.in.
3793 * mpw-make.in: New file, MPW version of Makefile.in.
3795 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3797 * alpha-dis.c (print_insn_alpha): Put empty statement after
3800 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3802 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3803 (low_sign_extend): Likewise.
3804 (get_field): Delete unused function.
3805 (set_field, deposit_14, deposit_21): Likewise.
3807 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3809 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3812 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3814 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3816 * alpha-opc.h (OSF_ASMCODE): define
3817 print pal-code names as defined in App C of the
3818 Alpha Architecture Reference Manual
3820 * alpha-dis.c: cleaned up output
3821 print stylized code forms as defined in App A.4.3 of the
3822 Alpha Architecture Reference Manual
3824 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3826 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3828 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3831 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3833 * m68k-dis.c (opcode): New function. Returns address of opcode
3834 table entry given index, even if the opcode table was split to
3835 work around gcc bugs.
3836 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3838 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3839 (reg_names): Now const.
3840 (print_insn_arg): Arrays cacheFieldName and names now const.
3841 (print_indexed): Array scales now const.
3843 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3845 * ppc-opc.c: Sort recently added instructions by minor opcode
3846 number within major opcode number.
3848 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3850 * hppa-dis.c: Include libhppa.h.
3852 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3854 * mips-opc.c: Change dli to use M_DLI, and add dla.
3856 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3858 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3860 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3862 * mips-opc.c: Add r4650 mul instruction.
3864 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3866 * mips-opc.c: Add uld and usd macros for unaligned double load and
3869 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3871 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3872 mfdcr, mtdcr, icbt, iccci.
3874 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3876 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3877 signed char fields to shorts, more portable.
3879 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3881 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3882 char fields as signed chars, since they may have negative values.
3884 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3886 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3887 (mycroft@netbsd.org).
3889 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3891 From "Logg, Ed" <elogg@ea.com>:
3892 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3893 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3896 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3898 * ppc-opc.c: Changes based on patch from David Edelsohn
3899 <edelsohn@mhpcc.edu>.
3900 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3903 (insert_tbr): New static function.
3904 (extract_tbr): New static function.
3905 (XFXFXM_MASK, XFXM): Define.
3906 (XSPRBAT_MASK, XSPRG_MASK): Define.
3907 (powerpc_opcodes): Add instructions to access special registers by
3908 name. Add mtcr and mftbu.
3910 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3912 * mips-opc.c (P3): Define.
3913 (mips_opcodes): Add mad and madu.
3915 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3917 * configure.in: Add W65 support.
3918 * disassemble.c: Likewise.
3919 * w65-opc.h, w65-dis.c: New files.
3921 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3923 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3926 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3928 * mips-opc.c: Add dli as a synonym for li.
3930 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3932 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3933 print something for reserved opcode values, even if it won't
3936 * mips-dis.c (_print_insn_mips): When initializing, shift right
3937 and mask, to avoid sign extension problems on the Alpha.
3939 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3942 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3944 * sh-opc.h (mov.l gbr): Get direction right.
3945 * sh-dis.c (print_insn_shx): New function.
3946 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3947 print opcodes with right byte order.
3949 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3951 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3952 to avoid conflicts with getopt.
3954 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3956 * hppa-dis.c (print_insn_hppa): Read the instruction using
3957 bfd_getb32, so that it works on a little endian or 64 bit host.
3958 Remove unused local variable op.
3960 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3962 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3963 addu does not work correctly if -mips3.
3965 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3967 * a29k-dis.c (print_special): Add special register names defined
3968 on 29030, 29040 and 29050.
3969 (print_insn): Handle new operand type 'I'.
3971 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3973 * Makefile.in (INSTALL): Use top level install.sh script.
3975 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3977 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3978 that it works on a little endian host.
3980 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3982 * configure.in: Use ${config_shell} when running config.bfd.
3984 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3986 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3988 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3990 * a29k-dis.c (print_insn): Print the opcode.
3992 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3994 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3996 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3998 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4000 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4002 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4003 which store a value into memory.
4005 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4007 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4008 * arm-dis.c, arm-opc.h: New files.
4010 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4012 * Makefile.in (ns32k-dis.o): Add dependency.
4013 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4014 string, not as array of chars.
4016 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4018 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4020 * sparc-opc.c: Added sparclite extended FP operations, and
4021 versions of v9 impdep* instructions permitting specification of
4024 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4026 * i960-dis.c (reg_names): Now const.
4027 (struct sparse_tabent): New type, copied from array type in mem
4029 (ctrl): Local static array ctrl_tab now const.
4030 (cobr): Local static array cobr_tab now const.
4031 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4032 static variable mem_tab no longer explicitly initialized. Changed
4033 mem_init to const array of struct sparse_tabent.
4034 (reg): Local static variable reg_tab no longer explicitly
4035 initialized. Changed reg_init to const array of struct
4037 (ea): Local static array scale_tab now const.
4039 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4042 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4044 * configure.bat: the disassember needs to be enabled for
4045 "objdump -d" to work in djgpp.
4047 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4049 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4050 (invalid_float): Enabled general version, doesn't require running
4051 on ns32k host. Changed to take char* argument, and test for
4052 explicitly specified sizes, instead of using sizeof() on host CPU
4054 (INVALID_FLOAT): Cast first argument.
4055 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4056 list_P032, list_M032): Now const.
4057 (optlist, list_search): Made appropriate arguments now point to
4059 (print_insn_arg): Changed static array of one-character-string
4060 pointers into a static const array of characters; fixed sprintf
4061 statement accordingly.
4063 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4065 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4066 from distribution. A ns32k-dis.c from a previous distribution has
4067 been brought up to date and supports the new interface.
4069 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4071 * configure.in: add bfd_ns32k_arch target support.
4073 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4074 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4076 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4078 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4081 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4083 * h8300-dis.c, mips-dis.c: Don't use true and false.
4085 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4087 * configure.in: Change --with-targets to --enable-targets.
4089 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4091 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4092 opcodes to the first instruction with that opcode, to speed
4093 disassembly of large files. From ralphc@pyramid.com (Ralph
4096 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4098 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4100 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4102 * configure.bat: update to latest makefile.in
4104 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4106 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4107 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4108 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4109 slot insn is in a delay slot.
4110 * z8k-opc.h: (resflg): Fix patterns.
4111 * h8500-opc.h Fix CR insn patterns.
4113 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4115 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4116 "cmpl" before POWER versions, so that gas -many uses them.
4118 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4120 * disassemble.c: New file.
4121 * Makefile.in (OFILES): Add disassemble.o.
4122 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4123 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4124 binutils/configure.in.
4126 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4127 opcode being examined.
4129 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4131 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4132 (insert_ral, insert_ram, insert_ras): New functions.
4133 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4134 RAS for store with update.
4136 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4138 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4139 (edelsohn@npac.syr.edu).
4141 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4143 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4146 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4148 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4150 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4152 * ppc-opc.c (powerpc_operands): The signedp field has been
4153 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4154 instead. Add new operand SISIGNOPT.
4155 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4156 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4157 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4160 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4162 * i386-dis.c (struct private): Renamed to dis_private. `private'
4163 is a reserved word for dynix cc.
4165 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4167 * configure.in: Change error message to refer to bfd/config.bfd
4168 rather than bfd/configure.in.
4170 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4172 * ppc-opc.c: Define POWER2 as short alias flag.
4173 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4176 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4178 * i960-dis.c (print_insn_i960): Don't read a second word for
4179 opcodes 0, 1, 2 and 3.
4181 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4183 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4185 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4187 * m68881-ext.c: Removed; no longer used.
4188 * Makefile.in: Changed accordingly.
4190 * m68k-dis.c (ext_format_68881): Don't declare.
4191 (print_insn_m68k): If an instruction uses place 'i', it uses at
4192 least four fixed bytes.
4193 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4194 extended float, convert to double using floatformat_to_double, not
4195 ieee_extended_to_double, and fetch the data before converting it.
4197 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4199 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4200 davidj@ICSI.Berkeley.EDU (David Johnson).
4202 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4204 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4205 PowerPC uses bdnz[l][a].
4207 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4209 * dis-buf.c, i386-dis.c: Include sysdep.h.
4211 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4213 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4215 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4216 by Motorola PowerPC 601 with PPC_OPCODE_601.
4217 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4218 Disassemble Motorola PowerPC 601 instructions as well as normal
4219 PowerPC instructions.
4221 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4223 * i960-dis.c (reg, mem): Just use a static array instead of
4226 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4228 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4229 condition name index if this is for a negated condition.
4231 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4232 Floating point format for 'H' operand is backwards from normal
4233 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4234 operands (fmpyadd and fmpysub), handle bizarre register
4235 translation correctly for single precision format.
4237 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4238 or 'I' operands if the next format specifier is 'M' (fcmp
4239 condition completer).
4241 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4243 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4244 single number giving a bitmask for the MB and ME fields of an M
4245 form instruction. Change NB to accept 32, and turn it into 0;
4246 also turn 0 into 32 when disassembling. Seperated SH from NB.
4247 (insert_mbe, extract_mbe): New functions.
4248 (insert_nb, extract_nb): New functions.
4249 (SC_MASK): Mask out SA and LK bits.
4250 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4251 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4252 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4253 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4254 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4255 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4256 (powerpc_macros): Define table of macro definitions.
4257 (powerpc_num_macros): Define.
4259 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4260 if PPC_OPERAND_NEXT is set.
4262 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4264 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4265 char. Retrieve contents using bfd_getl32 instead of shifting.
4267 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4269 * ppc-opc.c: New file. Opcode table for PowerPC, including
4270 opcodes for POWER (RS/6000).
4271 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4272 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4273 (CFILES): Add ppc-dis.c.
4274 (ppc-dis.o, ppc-opc.o): New targets.
4275 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4277 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4279 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4280 No space before 'u', 'f', or 'N'.
4282 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4284 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4285 farther than we should.
4287 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4289 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4291 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4293 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4295 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4296 needs it, to prevent reading past the end of a section.
4298 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4300 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4301 Removed t,A case for la; always use t,A(b) case.
4303 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4305 From Ted Lemen <mellon@pepper.ncd.com>
4306 * mips-dis.c (print_insn_arg): Handle 'k'.
4307 * mips-opc.c: Make cache use k, not t.
4309 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4311 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4312 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4313 FLOAT_FORMAT_CODE to put out floating point register names.
4315 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4317 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4319 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4321 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4323 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4325 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4326 larger than 32. Moved dsxx32 variants first for disassembler.
4328 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4330 * z8kgen.c, z8k-opc.h: Add full lda information.
4332 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4334 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4335 movb instructions. Any necessary space will be emitted by
4336 the code to handle nullification completers.
4338 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4340 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4342 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4344 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4345 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4347 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4349 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4351 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4353 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4354 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4356 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4358 * m88k-dis.c (m88kdis): comment change. Remove space after
4360 (printop): handle new arg types DEC and XREG for m88110.
4362 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4364 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4365 type for absolute branch addresses. Delete special
4366 "ble" and "be" code in 'W' operand code.
4368 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4370 * mips-opc.c: Set hazard information correctly for branch
4371 likely instructions.
4373 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4375 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4376 info->fprintf_func for printing and info->print_address_func for
4379 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4381 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4383 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4385 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4386 Corrected second case of "b" for disassembler.
4388 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4390 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4391 to BFD swapping routines to correspond to BFD name changes.
4393 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4395 * mips-opc.c: Change div machine instruction to be z,s,t rather
4396 than s,t. Change div macro to be d,v,t rather than d,s,t.
4397 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4398 rem and remu which generates only the corresponding div
4399 instruction. This is for compatibility with the MIPS assembler,
4400 which only generates the simple machine instruction when an
4401 explicit destination of $0 is used.
4402 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4404 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4406 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4407 WR_31 hazard for bal, bgezal, bltzal.
4409 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4411 * hppa-dis.c (print_insn_hppa): Use print function
4412 from within the disassemble_info, not fprintf_filtered.
4414 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4416 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4417 Law, law@cs.utah.edu.)
4419 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4421 * mips-opc.c ("absu"): Removed.
4424 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4426 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4427 Changed hazard information to distinguish between memory load
4428 delays and coprocessor load delays.
4430 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4432 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4434 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4436 * configure.in: Don't pass cpu to config.bfd.
4438 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4440 * m88k-dis.c (m88kdis): Make class unsigned.
4442 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4444 * alpha-dis.c (print_insn_alpha): One branch format case was
4445 missing the instruction name.
4447 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4449 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4450 Add the arch-specific auxiliary files.
4451 (OFILES): Remove the arch-specific auxiliary files
4452 and use BFD_MACHINES instead of DIS_LIBS.
4453 * configure.in: Set BFD_MACHINES based on --with-targets option.
4455 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4457 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4460 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4462 * sparc-opc.c: Change CONST to const to deal with gcc
4463 -Dconst=__const -traditional.
4465 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4467 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4468 coprocessor instructions out of #if 0, and made them use new
4471 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4473 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4475 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4477 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4478 instruction, for use by the disassembler.
4480 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4481 hand-coded sign extensions that depended on 32-bit host ints.
4482 FIXME, we still depend on big-endian host bitfield ordering.
4483 (sparc_print_insn): Set the insn_info_valid field, and the
4484 other fields that describe the instruction being printed.
4486 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4488 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4489 `jmp' instead of just one of them.
4491 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4493 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4494 (fput_fp_reg_r): Renamed from fput_reg_r.
4495 (fput_fp_reg): New function.
4496 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4498 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4500 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4502 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4504 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4506 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4507 don't output a space.
4509 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4511 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4513 * mips-opc.c: New file, containing opcode table from
4514 ../include/opcode/mips.h.
4515 * Makefile.in: Add it.
4517 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4519 * m88k-dis.c: New file, moved in from gdb and changed to use the
4520 new dis-asm.h disassembler interface.
4521 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4522 (m88k-dis.o): New target.
4524 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4526 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4527 argument string const char * to correspond to opcode/mips.h.
4529 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4531 * mips-dis.c: Updated to account for name changes in new version
4533 * Makefile.in: Added header file dependencies.
4535 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4537 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4539 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4541 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4542 extend, rather than shifts.
4544 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4546 * Makefile.in: Undo 15 June change.
4548 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4550 * m68k-dis.c (print_insn_arg): Change return value to byte count
4552 * m68k-dis.c: Re-write to detect invalid operands before
4553 printing anything, so we can handle this the same way we
4554 handle invalid opcodes.
4556 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4558 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4560 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4562 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4565 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4567 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4569 * configure.in: Do make sysdep.h link.
4570 * Makefile.in: Search ../include. Don't search ../bfd.
4572 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4574 Changes from Jeff Law, law@cs.utah.edu:
4575 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4576 Do not print a space before the completers specified by
4579 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4581 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4582 defined, since gdb has been fixed.
4584 Changes from Jeff Law, law@cs.utah.edu:
4585 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4586 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4587 be a *disassemble_info, not a *FILE.
4588 * hppa-dis.c: Support 'd', '!', and 'a'.
4589 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4590 * hppa-dis.c: Delete cases which are no longer needed.
4592 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4594 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4596 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4598 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4601 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4603 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4604 * configure.in: No longer need to configure to get sysdep.h.
4606 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4608 * Patches from Jeffrey Law <law@cs.utah.edu>.
4609 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4610 templates for 1.1 FP computational instructions.
4612 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4614 * h8500-dis.c (print_insn_h8500): Address argument is type
4616 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4619 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4620 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4622 * sparc-dis.c (compare_opcodes): Move static declaration to
4625 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4627 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4628 instruction, remove unimp hack from 'l' argument.
4630 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4632 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4635 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4637 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4638 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4641 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4643 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4644 arrays of string pointers to 2-d arrays of chars, to save
4647 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4649 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4650 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4652 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4654 * hppa-dis.c: New file from Utah, adapted to new disassembler
4656 * Makefile.in: Include it.
4658 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4660 * sh-dis.c, sh-opc.h: New files.
4662 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4664 * alpha-dis.c, alpha-opc.h: New files.
4666 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4668 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4671 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4673 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4675 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4677 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4680 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4682 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4683 and double percent signs a few places.
4685 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4687 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4688 Use info->print_address_func not print_address.
4690 * dis-buf.c (generic_print_address): New function.
4692 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4694 * Makefile.in: Add sparc-dis.c.
4695 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4697 Add `add' instruction to the set that get checked
4698 for a preceding `sethi' in order to print an absolute address.
4699 * (print_insn): Disassembly prefers real instructions.
4700 (is_delayed_branch): Speed up.
4701 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4702 Still missing some float ops, and needs testing.
4703 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4704 F_ALIAS. Use printf, not fprintf, when not passing a file
4706 (compare_opcodes): Check that identical instructions have
4707 identical opcodes, complain otherwise.
4710 * Include reg_names.
4712 Use dis-asm.h/read_memory_func interface.
4714 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4716 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4717 deliberately return non-zero to setjmp from longjmp. Otherwise
4718 this code fails to compile.
4720 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4722 * m68k-dis.c: Fix prototype for fetch_arg().
4724 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4726 * dis-buf.c: New file, for new read_memory_func interface.
4727 Makefile.in (OFILES): Include it.
4728 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4729 Use new read_memory_func interface.
4731 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4733 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4734 * h8500-opc.h: Fix couple of opcodes.
4736 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4738 * Makefile.in: add dvi & installcheck targets
4740 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4742 * Makefile.in: Update for h8500-dis.c.
4744 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4746 * h8500-dis.c, h8500-opc.h: New files
4748 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4750 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4751 ../include/dis-asm.h.
4752 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4753 and ../gdb/m68k-pinsn.c).
4754 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4755 and ../gdb/i386-pinsn.c).
4756 * m68881-ext.c: New file. Moved definition of
4757 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4758 * Makefile.in: Adjust for new files.
4759 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4760 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4761 can be dis-assembled.
4763 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4765 * mips-dis.c (print_insn_arg): Now returns void.
4767 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4769 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4770 files that use the macros.
4772 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4774 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4775 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4776 (CFILES): Added mips-dis.c.
4778 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4780 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4781 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4783 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4785 * Makefile.in: Improve *clean rules.
4786 * configure.in: Allow a default host.
4788 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4790 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4791 files include other sysdep files
4793 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4795 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4797 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4799 * configure.in: For host support, use ../bfd/configure.host
4800 so it stays in sync with the ../bfd/hosts database.
4802 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4804 * configure.in: use cpu-vendor-os triple instead of nested cases
4806 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4808 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4809 *always* the wrong one.
4811 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4813 * z8kgen.c: added copyright info
4815 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4817 * z8k-dis.c (unparse_instr): prettier tabs
4818 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4820 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4822 * configure.in: Add ncr* configuration.
4823 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4824 picayune ANSI compilers happy.
4826 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4828 * configure.in (i386): Make i386 and i486 synonymous for now.
4829 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4831 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4833 * Makefile.in (install): Fix typo.
4835 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4837 * Makefile.in (make): Remove obsolete crud.
4838 (sparc-opc.o): Avoid Sun Make VPATH bug.
4840 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4842 * Makefile.in: since there are no SUBDIRS, remove rule and
4843 references of subdir_do.
4845 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4847 * Makefile.in (install): Get the library name right here too.
4848 Don't install bfd.h, since it's unrelated to this library. No
4849 subdirs to recurse into, either.
4850 (CFILES): The source file has a .c suffix, not .o.
4852 * sparc-opc.c: New file, moved from BFD.
4853 * Makefile.in (OFILES): Build it.
4855 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4857 * z8k-dis.c: fixed forward refferences of some declarations.
4859 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4861 * Makefile.in: get the name of the library right
4863 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4865 * z8k-dis.c: knows how to disassemble z8k stuff
4866 * z8k-opc.h: new file full of z8000 opcodes
4870 version-control: never