1 2000-02-22 Ian Lance Taylor <ian@zembu.com>
3 From Grant Erickson <gerickso@Brocade.COM>:
4 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
6 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
8 * dis-buf.c (buffer_read_memory): Change `length' param and all int
11 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
13 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
14 (print_insn_ppi): Likewise.
15 (print_insn_shx): Use info->mach to select appropriate insn set.
16 Add support for sh-dsp. Remove FD_REG_N support.
17 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
18 (sh_arg_type): Likewise. Remove FD_REG_N.
19 (sh_dsp_reg_nums): New enum.
20 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
21 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
22 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
23 (arch_sh3_dsp_up): Likewise.
24 (sh_opcode_info): New field: arch.
25 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
26 D_REG_N. Fill in arch field. Add sh-dsp insns.
28 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
30 * arm-dis.c: Change flavor name from atpcs-special to
31 special-atpcs to prevent name conflict in gdb.
32 (get_arm_regname_num_options, set_arm_regname_option,
33 get_arm_regnames): New functions. API to access the several
34 flavor of register names. Note: Used by gdb.
35 (print_insn_thumb): Use the register name entry from the currently
36 selected flavor for LR and PC.
38 2000-02-10 Nick Clifton <nickc@cygnus.com>
40 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
42 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
43 "mulsh.h" instructions.
44 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
46 (print_insn_mcore): Add support for little endian targets.
47 Add support for MULSH and OPSR classes.
49 2000-02-07 Nick Clifton <nickc@cygnus.com>
51 * arm-dis.c (parse_arm_diassembler_option): Rename again.
52 Previous delat did not take.
54 2000-02-03 Timothy Wall <twall@redhat.com>
56 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
57 to adjust target address bounds checking and calculate the
58 appropriate octet offset into data.
60 2000-01-27 Nick Clifton <nickc@redhat.com>
62 * arm-dis.c: (parse_disassembler_option): Rename to
63 parse_arm_disassembler_option and allow to be exported.
65 * disassemble.c (disassembler_usage): New function: Print out any
66 target specific disassembler options.
67 Call arm_disassembler_options() if the ARM architecture is being
70 * arm-dis.c (NUM_ELEM): Define this macro if not already
72 (arm_regname): New struct type for ARM register names.
73 (arm_toggle_regnames): Delete.
74 (parse_disassembler_option): Use register name structure.
75 (print_insn): New function: Combines duplicate code found in
76 print_insn_big_arm and print_insn_little_arm.
77 (print_insn_big_arm): Call print_insn.
78 (print_insn_little_arm): Call print_insn.
79 (print_arm_disassembler_options): Display list of supported,
80 ARM specific disassembler options.
82 2000-01-27 Thomas de Lellis <tdel@windriver.com>
84 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
85 ARM_STT_16BIT flag as Thumb code symbols.
87 * arm-dis.c (printf_insn_little_arm): Ditto.
89 2000-01-25 Thomas de Lellis <tdel@windriver.com>
91 * arm-dis.c (printf_insn_thumb): Prevent double dumping
92 of raw thumb instructions.
94 2000-01-20 Nick Clifton <nickc@cygnus.com>
96 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
98 2000-01-03 Nick Clifton <nickc@cygnus.com>
100 * arm-dis.c (streq): New macro.
102 (force_thumb): ew local variable.
103 (parse_disassembler_option): New function: Parse a single, ARM
104 specific disassembler command line switch.
105 (parse_disassembler_option): Call parse_disassembler_option to
106 parse individual command line switches.
107 (print_insn_big_arm): Check force_thumb.
108 (print_insn_little_arm): Check force_thumb.
110 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
112 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
114 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
116 * m10300-opc.c, m10300-dis.c: Add am33 support.
118 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
120 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
121 (print_insn_hppa): Handle 'B' operand.
123 1999-11-22 Nick Clifton <nickc@cygnus.com>
125 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
127 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
129 * mips-opc.c (I5): New.
130 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
131 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
132 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
134 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
136 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
137 * arm-opc.h (print_insn_arm): Added comment documenting
138 the 'X' format just added to arm-dis.c.
140 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
142 * mips-opc.c (la): Create a version that just uses addiu directly.
143 (dla): Expand to daddiu if possible.
145 1999-11-11 Nick Clifton <nickc@cygnus.com>
147 * mips-opc.c: Add ssnop pattern.
149 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
151 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
153 1999-10-29 Nick Clifton <nickc@cygnus.com>
155 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
156 (d30v_format_tab): Define the SHORT_AR format.
158 1999-10-28 Nick Clifton <nickc@cygnus.com>
160 * mcore-dis.c: Remove spurious code introduced in previous delta.
162 1999-10-27 Scott Bambrough <scottb@netwinder.org>
164 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
166 1999-10-18 Michael Meissner <meissner@cygnus.com>
168 * alpha-opc.c (alpha_operands): Fill in missing initializer.
169 (alpha_num_operands): Convert to unsigned.
170 (alpha_num_opcodes): Ditto.
171 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
176 (extract_bdisp): Ditto.
177 (extract_jhint): Ditto.
178 (extract_ev6hwjhint): Ditto.
180 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
182 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
185 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
187 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
189 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
191 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
192 rac/rachi instructions.
193 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
196 1999-10-04 Doug Evans <devans@casey.cygnus.com>
198 * fr30-asm.c,fr30-desc.h: Rebuild.
199 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
200 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
202 1999-09-29 Nick Clifton <nickc@cygnus.com>
204 * sh-opc.h: Fix bit patterns for several load and store
207 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
209 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
210 cleaner code using completer prefixes. Add 'Y'.
212 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
214 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
216 * hppa-dis.c (extract_22): New function.
218 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
220 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
222 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
224 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
226 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
228 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
230 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
232 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
234 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
236 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
238 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
240 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
243 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
245 * hppa-dis.c: (print_insn_hppa): Add missing break after
248 * hppa-dis.c: Finish constifying various completers, register
251 1999-09-14 Michael Meissner <meissner@cygnus.com>
253 * configure.in (Canonicalization of target names): Remove adding
254 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
255 generates $ac_config_sub with a ${CONFIG_SHELL} already.
256 * configure: Regenerate.
258 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
260 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
262 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
264 1999-09-07 Nick Clifton <nickc@cygnus.com>
266 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
267 names for the mulu and muls patterns.
269 1999-09-04 Steve Chamberlain <sac@pobox.com>
271 * pj-opc.c: New file.
272 * pj-dis.c: New file.
273 * disassemble.c (disassembler): Handle bfd_arch_pj.
274 * configure.in: Handle bfd_pj_arch.
275 * Makefile.am: Rebuild dependencies.
276 (CFILES): Add pj-dis.c and pj-opc.c.
277 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
278 * configure, Makefile.in: Rebuild.
280 1999-09-04 H.J. Lu <hjl@gnu.org>
282 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
284 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
286 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
288 1999-08-04 Doug Evans <devans@casey.cygnus.com>
290 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
291 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
292 * m32r-opinst.c: Rebuild.
294 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
296 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
297 register args by 'f'.
299 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
301 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
302 extract_10U_store): New.
303 (print_insn_hppa): Add new completers.
305 * hppa-dis.c (signed_unsigned_names,mix_half_names,
306 saturation_names): New.
307 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
309 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
311 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
313 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
314 to decide to print a space.
316 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
318 * i386-dis.c: Add AMD athlon instruction support.
320 1999-08-10 Ian Lance Taylor <ian@zembu.com>
322 From Wally Iimura <iimura@microunity.com>:
323 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
324 overflow at end of address space.
325 (generic_print_address): Use sprintf_vma.
327 1999-08-08 Ian Lance Taylor <ian@zembu.com>
329 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
330 MKDEP. Rebuild dependencies.
331 * Makefile.in: Rebuild.
333 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
335 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
336 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
337 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
338 (print_insn_hppa): Add 64 bit condition completers.
340 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
342 * hppa-dis.c (print_insn_hppa): Change condition args to use
345 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
347 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
350 1999-07-21 Ian Lance Taylor <ian@zembu.com>
353 * configure.bat: Remove; obsolete.
355 1999-07-11 Ian Lance Taylor <ian@zembu.com>
357 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
358 (generic_strcat_address): Add cast to avoid warning.
359 * i386-dis.c: Initialize all structure fields to avoid warnings.
360 Add ATTRIBUTE_UNUSED as appropriate.
362 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
364 * sparc-dis.c (print_insn_sparc): Differentiate between
365 addition and oring when guessing symbol for comment.
367 1999-07-05 Nick Clifton <nickc@cygnus.com>
369 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
372 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
374 * i386-dis.c: Mention intel mode specials in macro char comment.
376 1999-06-21 Ian Lance Taylor <ian@zembu.com>
378 * alpha-dis.c: Don't include <stdlib.h>.
379 * arm-dis.c: Include "sysdep.h".
380 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
382 * Makefile.am: Rebuild dependencies.
383 * Makefile.in: Rebuild.
385 1999-06-16 Nick Clifton <nickc@cygnus.com>
387 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
390 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
392 * arm-dis.c (arm_regnames): Turn into a pointer to a register
394 (arm_regnames_standard): New variable: Array of ARM register
395 names according to ARM instruction set nomenclature.
396 (arm_regnames_apcs): New variable: Array of ARM register names
397 according to ARM Procedure Call Standard.
398 (arm_regnames_raw): New variable: Array of ARM register names
399 using just 'r' and the register number.
400 (arm_toggle_regnames): New function: Toggle the chosen register set
402 (parse_disassembler_options): New function: Parse any target
403 disassembler command line options.
404 (print_insn_big_arm): Call parse_disassembler_options if any
406 (print_insn_little_arm): Call parse_disassembler_options if any
409 1999-06-13 Ian Lance Taylor <ian@zembu.com>
411 * i386-dis.c (FWAIT_OPCODE): Define.
412 (used_prefixes): New static variable.
413 (fetch_data): Don't print an error message if we have already
414 fetched some bytes successfully.
415 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
416 (prefix_name): New static function.
417 (print_insn_i386): If setjmp fails, indicating a data error, but
418 we have managed to fetch some bytes, print the first one as a
419 prefix or a .byte pseudo-op. If fwait is followed by a non
420 floating point instruction, print the first prefix. Set
421 used_prefixes when prefixes are used. If any prefixes were not
422 used after disassembling the instruction, print the first prefix
423 instead of printing the instruction.
424 (putop): Set used_prefixes when prefixes are used.
425 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
426 (OP_DIR, OP_SIMD_Suffix): Likewise.
428 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
430 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
431 Support signx %reg, clruw %reg.
433 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
435 * sparc-opc.c: Add aliases Solaris as supports.
437 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
439 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
440 * Makefile.in: Regenerated.
442 1999-06-03 Philip Blundell <philb@gnu.org>
444 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
445 when target is PC-relative.
447 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
449 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
452 * m68k-dis.c (fetch_arg): Add places `n', `o'.
454 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
455 Add mcf5206e to appropriate instructions.
456 Add alias for MAC, MSAC.
458 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
461 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
462 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
464 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
466 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
468 * i386-dis.c (Ed): Define.
469 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
471 (OP_rm): Rename to OP_Rd.
474 (putop): Add const to template and p.
475 (print_insn_x86): Delete.
476 (print_insn_i386): Merge old function print_insn_x86. Add const
478 (struct dis386): Add const to name.
479 (dis386_att, dis386_intel): Add const.
480 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
481 (names32, names16, names8, names_seg, index16): Add const.
482 (grps, prefix_user_table, float_reg): Add const.
483 (float_mem_att, float_mem_intel): Add const.
484 (oappend): Add const to s.
485 (OP_REG): Add const to s.
486 (ptr_reg): Add const to s.
487 (dofloat): Add const to dp.
488 (OP_C): Don't skip modrm, it's now done in OP_Rd.
491 (OP_Rd): Check for valid mod. Call Op_E to print.
492 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
493 (OP_MS): Check for valid mod. Call Op_EM to print.
494 (OP_3DNowSuffix): Set obufp and use oappend rather than
495 strcat. Call BadOp() for errors.
496 (OP_SIMD_Suffix): Likewise.
497 (BadOp): New function.
499 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
501 * i386-dis.c (dis386_intel): Remove macro chars, except for
502 jEcxz. Change cWtR and cRtd to cW and cR.
503 (dis386_twobyte_intel): Remove macro chars here too.
504 (putop): Handle R and W macros for intel mode.
506 * i386-dis.c (SIMD_Fixup): New function.
507 (dis386_twobyte_att): Use it on movlps and movhps, and change
508 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
509 (dis386_twobyte_intel): Same here.
511 * i386-dis.c (Av): Remove.
515 (OP_SIMD_Suffix): New function.
516 (OP_DIR): Remove dead code.
517 (eAX_reg..eDI_reg): Renumber.
518 (onebyte_has_modrm): Table numbering comments.
519 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
520 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
521 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
522 and handle SIMD cmp insns in OP_SIMD_Suffix.
523 (info->bytes_per_line): Bump from 5 to 6.
525 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
526 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
528 PIII SIMD support from Doug Ledford <dledford@redhat.com>
529 * i386-dis.c (XM, EX, None): Define.
530 (OP_XMM, OP_EX, OP_None): New functions.
531 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
532 (GRP14): Rename to GRPAMD.
533 (GRP*): Add USE_GROUPS flag.
535 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
536 (twobyte_has_modrm): Add SIMD entries.
537 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
538 (grps): Add SIMD insns.
539 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
540 oappend repz if uses_f3_prefix. Add code to handle new groups for
543 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
544 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
545 operand from Av to Jv.
547 1999-05-07 Nick Clifton <nickc@cygnus.com>
549 * mcore-dis.c (print_insn_mcore): Use .short to display
550 unidentified instructions, not .word.
552 1999-04-26 Tom Tromey <tromey@cygnus.com>
554 * aclocal.m4, configure: Updated for new version of libtool.
556 1999-04-14 Doug Evans <devans@casey.cygnus.com>
558 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
559 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
561 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
563 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
566 1999-04-10 Doug Evans <devans@casey.cygnus.com>
568 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
569 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
571 1999-04-06 Ian Lance Taylor <ian@zembu.com>
573 * opintl.h (LC_MESSAGES): Never define.
575 1999-04-04 Ian Lance Taylor <ian@zembu.com>
577 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
578 (separator_char, scale_char): Likewise.
579 (print_insn_x86): Likewise.
580 (print_insn_i386): Likewise. Add declaration.
582 1999-03-26 Doug Evans <devans@casey.cygnus.com>
584 * fr30-dis.c: Rebuild.
585 * m32r-dis.c: Rebuild.
587 1999-03-23 Ian Lance Taylor <ian@zembu.com>
589 * m68k-opc.c: Change compare instructions to use "@s" rather than
590 ";s" when used with an immediate operand.
592 1999-03-22 Doug Evans <devans@casey.cygnus.com>
594 * cgen-opc.c (cgen_set_cpu): Delete.
595 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
596 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
598 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
600 * po/opcodes.pot: Rebuild.
602 1999-03-16 Martin Hunt <hunt@cygnus.com>
604 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
606 1999-03-11 Doug Evans <devans@casey.cygnus.com>
608 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
609 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
610 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
611 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
612 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
613 * m32r-opinst.c: Rebuild.
615 1999-02-25 Doug Evans <devans@casey.cygnus.com>
617 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
618 (cgen_hw_lookup_by_num): Rewrite.
619 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
620 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
621 * m32r-opinst.c: Rebuild.
623 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
625 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
626 (insert_jhint): Fix insertion mask.
627 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
629 1999-02-10 Doug Evans <devans@casey.cygnus.com>
631 * Makefile.in: Rebuild.
633 1999-02-09 Doug Evans <devans@casey.cygnus.com>
635 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
636 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
637 * Makefile.am: Remove references to them.
638 (HFILES): Add fr30-desc.h,m32r-desc.h.
639 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
641 (ALL_MACHINES): Update.
642 * configure.in: Redo handling of cgen_files.
643 (bfd_i960_arch): Delete i960c-*.lo files.
644 * configure: Regenerate.
645 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
646 (hash_insn_array): Rewrite.
647 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
648 (hash_insn_array): Rewrite.
649 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
650 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
651 (cgen_lookup_get_insn_operands): Ditto.
652 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
653 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
654 * po/POTFILES.in: Rebuild.
655 * po/opcodes.pot: Rebuild.
657 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
659 * Makefile.am: Rebuild dependencies.
660 (HFILES): Add fr30-opc.h.
661 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
662 * Makefile.in: Rebuild.
664 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
665 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
667 * acconfig.h: Remove.
668 * configure: Rebuild with current autoconf/automake.
669 * aclocal.m4: Likewise.
670 * config.in: Likewise.
671 * Makefile.in: Likewise.
673 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
675 * m68k-opc.c: Correct move (not movew) to status word on 5200.
677 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
679 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
680 * i386-dis.c (x_mode): Define.
684 (dis386_twobyte): Remove.
685 (dis386_twobyte_att): New.
686 (dis386_twobyte_intel): New.
687 (print_insn_x86): Use new arrays.
689 (float_mem_intel): New.
690 (float_mem_att): New.
691 (dofloat): Use new float_mem arrays.
692 (print_insn_i386_att): New.
693 (print_insn_i386_intel): New.
694 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
695 (putop): Handle intel syntax.
696 (OP_indirE): Handle intel syntax.
697 (OP_E): Handle intel syntax.
698 (OP_I): Handle intel syntax.
699 (OP_sI): Handle intel syntax.
700 (OP_OFF): Handle intel syntax.
704 1999-01-27 Doug Evans <devans@casey.cygnus.com>
706 * fr30-opc.h,fr30-opc.c: Rebuild.
707 * i960c-opc.h,i960c-opc.c: Rebuild.
708 * m32r-opc.c: Rebuild.
710 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
712 * hppa-dis.c: revert HP merge changes until HP gives us
715 1999-01-19 Nick Clifton <nickc@cygnus.com>
717 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
718 offsets as well as symbloic address.
720 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
722 * hppa-dis.c: fix comments and some indentation.
724 1999-01-12 Doug Evans <devans@casey.cygnus.com>
726 * fr30-opc.c,i960c-opc.c: Regenerate.
728 1999-01-11 Doug Evans <devans@casey.cygnus.com>
730 * fr30-opc.c: Regenerate.
732 1999-01-06 Doug Evans <devans@casey.cygnus.com>
734 * m32r-dis.c: Regenerate.
736 1999-01-05 Doug Evans <devans@casey.cygnus.com>
738 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
739 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
740 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
742 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
744 * configure.in: Require autoconf 2.12.1 or higher.
746 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
748 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
750 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
752 * fr30-opc.c: Regenerated.
754 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
756 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
758 1998-12-15 Dave Brolley <brolley@cygnus.com>
760 * fr30-opc.c,fr30-opc.h: Regenerated.
762 1998-12-14 Dave Brolley <brolley@cygnus.com>
764 * fr30-opc.c,fr30-opc.h: Regenerated.
766 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
768 * fr30-opc.c,fr30-opc.h: Regenerated.
770 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
772 * m32r-opc.c: Regenerate.
774 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
776 * dis-buf.c (generic_strcat_address): reformat to GNU coding
777 conventions. change sprintf call to an sprintf_vma call.
779 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
781 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
783 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
785 The following changes were made by
786 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
787 David Taylor <taylor@texas.cygnus.com>, and
788 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
789 merge in changes by HP; HP did not create ChangeLog entries.
791 * dis-buf.c (generic_strcat_address): new function.
793 * hppa-dis.c: Changes to improve hppa disassembly.
794 Changed formatting in : reg_names, fp_reg_names,control_reg,
795 New variables : sign_extension_names, deposit_names, conversion_names
796 float_test_names, compare_cond_names_double, add_cond_names_double,
797 logical_cond_names_double, unit_cond_names_double,
798 branch_push_pop_names, saturation_names, shift_names, mix_names,
799 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
800 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
801 (fput_const): renamed as fput_hex_const
803 - use the macros fputs_filtered and
804 fput_decimal_const whenever possible; calls to sign_extend require
805 2 params -- add a missing second param of 0.
806 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
807 architecture version number of current machine. HP folks are
808 trying to handle situation where the target program was compiled
809 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
811 - added new cases : 'g', 'B', 'm'
812 - added cases specifically for PA 2.0
813 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
814 - calls to fput_const become calls to fput_hex_const
816 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
818 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
819 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
820 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
821 * Makefile.in: Rebuilt.
822 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
824 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
825 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
827 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
829 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
831 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
833 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
835 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
836 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
838 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
840 * fr30-opc.c: Regenerate.
842 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
844 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
846 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
848 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
850 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
852 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
854 1998-11-30 Doug Evans <devans@casey.cygnus.com>
856 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
857 CGEN_INSN_BASE_VALUE.
858 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
859 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
861 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
863 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
865 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
867 * fr30-asm.c,fr30-dis.c: Regenerated.
869 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
871 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
873 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
875 * fr30-opc.c: Regenerated.
877 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
879 * fr30-opc.c: Regenerated.
880 * fr30-opc.h: Regenerated.
881 * fr30-dis.c: Regenerated.
882 * fr30-asm.c: Regenerated.
884 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
886 * mips-opc.c (sync.p,sync.l): Swap insn values.
888 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
890 * fr30-opc.c: Regenerate.
892 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
894 * fr30-opc.c: Regenerated.
895 * fr30-opc.h: Regenerated.
897 1998-11-18 Doug Evans <devans@casey.cygnus.com>
899 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
900 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
902 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
904 * fr30-opc.c: Regenerated.
906 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
908 * fr30-opc.c: Regenerated.
909 * fr30-opc.h: Regenerated.
910 * fr30-dis.c: Regenerated.
911 * fr30-asm.c: Regenerated.
913 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
915 * po/opcodes.pot: Regenerated.
916 * fr30-opc.c: Regenerated.
917 * fr30-opc.h: Regenerated.
918 * fr30-dis.c: Regenerated.
919 * fr30-asm.c: Regenerated.
921 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
923 * disassemble.c (disassembler): Add support for FR30 target.
925 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
927 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
928 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
930 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
932 * po/opcodes.pot: Regenerate.
933 * po/POTFILES.in: Regenerate.
934 * fr30-opc.c: Regenerate.
935 * fr30-opc.h: Regenerate.
937 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
939 * m32r-asm.c: Regenerate.
941 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
943 * configure.in: Added case for bfd_fr30_arch.
944 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
945 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
946 (CLEANFILES): Added stamp-fr30.
948 * fr30-asm.c: New file.
949 * fr30-dis.c: New file.
950 * fr30-opc.c: New file.
951 * fr30-opc.h: New file.
952 * po/POTFILES.in: Regenerated
953 * po/opcodes.pot: Regenerated
955 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
957 * configure.in: detect cygwin* instead of cygwin32*
958 * configure: regenerate
960 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
962 * mips-opc.c (IS_M): Added.
964 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
966 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
968 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
970 * m32r-opc.h,m32r-opc.c: Regenerate.
972 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
974 * i386-dis.c (OP_3DNowSuffix): New static function.
977 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
978 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
979 (insn_codep): New static variable.
980 (print_insn_x86): Init insn_codep after prefixes.
981 (grps): Add GRP14 entries for prefetch, prefetchw.
984 From Jeff B Epler <jepler@usgs.gov>
985 * i386-dis.c (Suffix3DNow): New table.
987 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
989 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
991 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
993 * d10v-dis.c (print_operand): If num is nonzero, then
994 add OPERAND_ACC1, not OPERAND_ACC0.
996 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
998 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1001 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
1003 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1006 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1008 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1010 1998-09-09 Michael Meissner <meissner@cygnus.com>
1012 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1015 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1017 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1019 (print_insn_little_arm): Detect Thumb symbols in elf object
1022 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1024 * alpha-dis.c (print_insn_alpha): Use the machine type to
1025 decide which PALcode set to include.
1027 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1029 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1031 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1033 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1034 MSUB and MSUBS instructions.
1036 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1038 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1039 operand name macros.
1041 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1043 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1044 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1045 +, -, and d for ColdFire.
1047 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1048 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1049 (extract_mbe): Likewise.
1051 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1053 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1055 * m10300-opc.c: First cut at UDF instructions.
1057 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1059 * m32r-opc.c: Regenerate (remove semantic descriptions).
1061 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1063 * arm-dis.c (print_insn_big_arm): Fix indentation.
1064 (print_insn_little_arm): Likewise.
1066 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1068 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1070 (print_insn_little_arm): Likewise.
1072 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1074 Move all global state data into opcode table struct, and treat
1075 opcode table as something that is "opened/closed".
1076 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1077 (cgen_asm_init): Delete.
1078 (cgen_set_parse_operand_fn): New function.
1079 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1080 (cgen_dis_init): Delete.
1081 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1082 (cgen_current_{opcode_table_mach,endian}): Delete.
1083 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1085 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1087 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1090 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1092 * m10300-opc.c: Add entries for "no_match_operands" field in
1095 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1097 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1099 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1101 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1103 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1105 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1107 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1109 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1110 will be masked later.
1112 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1114 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1116 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1118 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1120 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1122 * m10300-dis.c: Only recognize instructions from the currently
1124 * m10300-opc.c: Add field indicating the particular variant of
1125 the mn10300 each instruction is available on.
1127 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1129 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1130 * Makefile.am: Rebuild dependencies.
1131 (CFILES): Add vax-dis.c.
1132 (ALL_MACHINES): Add vax-dis.lo.
1133 * aclocal.m4: Rebuild with current libtool.
1134 * configure, Makefile.in: Rebuild.
1136 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1138 * vax-dis.c: New file, from work by Pauline Middelink
1139 <middelin@polyware.iaf.nl>.
1140 * disassemble.c (ARCH_vax): Define if ARCH_all.
1141 (disassembler): Add case for ARCH_vax.
1142 * makefile.vms: Support compilation on vms/vax.
1144 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1146 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1147 related to sign extension and the size of ints.
1149 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1151 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1152 instructions. Support (sp) addressing mode by expanding it into
1155 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1157 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1159 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1161 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1163 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1165 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1168 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1170 * mips-dis.c (print_insn_little_mips): Previously, instruction
1171 printing references the symbol table to determine whether the
1172 instruction resides in a block regular instructions or mips16
1173 instructions. However, when the disassembler gets used in other
1174 environments where the symbol table is not present, we no longer
1175 rely in the symbol table, rather, use the low bit of the
1176 instructions address to guess. There should be no change for usage
1177 of the disassembler in host based programs, gdb, objdump.
1178 (print_insn_big_mips): ditto.
1179 (print_insn_mips): ditto
1181 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1183 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1185 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1187 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1189 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1191 * i386-dis.c (index16): Add '%' to register names. Use ','
1194 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1196 * i386-dis.c: Don't print opcode suffix when we can figure out the
1197 size (and gas can!) by register operands, or from the default
1199 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1201 (dis386, dis386_twobyte, grps): Use new suffix macros.
1202 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1203 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1204 order of cmps operands to agree with Intel docs. Correct operand
1205 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1206 agree with Intel docs.
1207 (print_insn_x86): Print orphan fwait before other prefixes.
1208 Return correct byte count for orphan fwait with prefixes. Don't
1209 print `bound' operands in reverse order.
1210 (ckprefix): Stop accumulating prefixes if we get fwait.
1211 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1213 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1215 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1216 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1218 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1220 Fix problems when bfd_vma is wider than long.
1221 * i386-dis.c: Make op_address and start_pc unsigned.
1222 (set_op): Make parameter unsigned.
1223 (print_insn_x86): Cast to bfd_vma when passing a value to
1225 * ns32k-dis.c (CORE_ADDR): Don't define.
1226 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1227 bfd_scan_vma to read back address.
1228 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1230 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1231 (NEXTULONG): New definition.
1232 (print_insn_m68k): Avoid overflow when computing third argument of
1234 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1235 Use disp instead of val to store offset values.
1236 (print_indexed): Use base_disp instead of word to store base
1237 displacement, to avoid overflow.
1238 * m10300-dis.c (disassemble): Cast value to long when computing
1239 pc-relative address, to get correct sign extension.
1241 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1243 * m32r-opc.c: Regenerate.
1245 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1247 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1248 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1250 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1252 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1254 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1256 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1258 (OP_DSreg): Rename from OP_DSSI.
1259 (OP_ESreg): Rename from OP_ESDI.
1260 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1262 (append_seg): Rename from append_prefix.
1263 (ptr_reg): New function.
1264 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1266 (PREFIX_ADDR): Rename from PREFIX_ADR.
1267 (float_reg): Add non-broken opcodes for people who don't want
1270 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1272 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1275 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1277 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1279 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1281 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1282 0; produce error message for shifts of size 32 (or 64 for 64-bit
1283 shifts), because the hardware doesn't support them.
1285 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1287 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1288 LONG_2, LONG_2b formats to use this new operand.
1290 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1292 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1294 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1296 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1297 endian data support.
1299 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1301 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1302 and SHORT_B3b formats to use Rb instead of Ra.
1304 Add FLAG_MUL16 to MUL2XH opcode.
1306 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1307 to existing 1.1.1 parallelisation prohibition procedure.
1309 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1311 * m32r-asm.c,m32r-dis.c: Regenerate.
1313 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1315 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1316 with a shift count of 0.
1318 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1320 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1321 (cgen_hw_lookup_by_num): New function.
1323 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1325 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1327 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1329 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1330 as big-endian on SPARClite.
1332 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1334 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1336 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1338 * po/Make-in (install-info): New target.
1340 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1342 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1343 * configure: Rebuild.
1345 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1347 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1348 variety of ISA2 instructions to set bottom ten bits of trap code.
1350 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1352 * Makefile.am (config.status): Add explicit target so that
1353 config.status depends upon bfd/configure.in.
1354 * Makefile.in: Rebuild.
1356 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1358 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1359 instructions to set bottom ten bits of break code.
1360 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1361 for above optional argument.
1363 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1365 * makefile.vms: Run dec c with /nodebug.
1367 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1369 * Makefile.in: Rebuilt.
1370 * Makefile.am: Regenerated dependencies with mkdep.
1372 * opintl.h (_): Define as dgettext.
1374 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1376 * cgen-asm.c: Internationalised.
1377 * m32r-asm.c: Internationalised.
1378 * m32r-dis.c: Internationalised.
1379 * m32r-opc.c: Internationalised.
1381 * aclocal.m4: Regenerated.
1382 * configure: Regenerated.
1383 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1384 * Makefile.in: Rebuild.
1385 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1386 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1388 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1390 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1392 * aclocal.m4, configure: Rebuild with current tools.
1394 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1396 * opintl.h: New file - contains internationalisation macros used
1397 by source files in this directory.
1398 * po/: New subdirectory - contains internationalisation files.
1399 * po/Make-in: New file - Makefile constructor.
1400 * po/POTFILES.in: New file - list of files in opcodes directory
1401 that should be scan for internationalisation macros.
1402 * po/opcodes.pot: New file - list of internationisation strings
1403 found in files mentioned in po/POTFILES.in.
1404 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1405 entry. Add intl directory to include paths.
1406 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1407 HAVE_STRCPY, HAVE_LC_MESSAGES
1408 * configure.in: Add rule to build Makefile in po subdirectory.
1409 * Makefile.in: Rebuilt.
1410 * aclocal.m4: Rebuilt.
1411 * config.in: Rebuilt.
1412 * configure: Rebuilt.
1413 * alpha-opc.c: Internationalised.
1414 * arc-dis.c: Internationalised.
1415 * arc-opc.c: Internationalised.
1416 * arm-dis.c: Internationalised.
1417 * cgen-asm.c: Internationalised.
1418 * d30v-dis.c: Internationalised.
1419 * dis-buf.c: Internationalised.
1420 * h8300-dis.c: Internationalised.
1421 * h8500-dis.c: Internationalised.
1422 * i386-dis.c: Internationalised.
1423 * m10200-dis.c: Internationalised.
1424 * m10300-dis.c: Internationalised.
1425 * m68k-dis.c: Internationalised.
1426 * m88k-dis.c: Internationalised.
1427 * mips-dis.c: Internationalised.
1428 * ns32k-dis.c: Internationalised.
1429 * opintl.h: Internationalised.
1430 * ppc-opc.c: Internationalised.
1431 * sparc-dis.c: Internationalised.
1432 * v850-dis.c: Internationalised.
1433 * v850-opc.c: Internationalised.
1435 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1437 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1438 (asm_hash_table_entries): New variable.
1439 (cgen_asm_init): Free asm_hash_table_entries.
1440 (hash_insn_array,hash_insn_list): New functions.
1441 (build_asm_hash_table): Use them. Hash macro insns as well.
1442 (cgen_asm_lookup_insn): Update.
1443 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1444 (dis_hash_table_entries): New variable.
1445 (cgen_dis_init): Free dis_hash_table_entries.
1446 (hash_insn_array,hash_insn_list): New functions.
1447 (build_dis_hash_table): Use them. Hash macro insns as well.
1448 (cgen_dis_lookup_insn): Update.
1449 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1450 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1451 (cgen_macro_insn_count): New function.
1452 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1454 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1456 * i386-dis.c (OP_DSSI): Print segment override.
1458 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1460 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1463 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1465 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1466 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1467 * configure.in: Define and substitute WIN32LDFLAGS and
1469 * aclocal.m4: Rebuild with new libtool.
1470 * configure, Makefile.in: Rebuild.
1472 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1474 * m32r-opc.c: Regenerate.
1476 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1478 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1479 before trying to copy it.
1480 * Makefile.in: Rebuild.
1482 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1484 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1486 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1488 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1489 from an arbitrary valid buffer instead of fetching them on demand
1491 (invalid_float): use bit_extract_simple() instead of bit_extract().
1493 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1495 From H.J. Lu <hjl@gnu.org>:
1496 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1499 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1501 * Branched binutils 2.9.
1503 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1505 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1506 disassembling last 4 bytes of a section.
1508 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1510 Fix some gcc -Wall warnings:
1511 * arc-dis.c (print_insn): Add casts to avoid warnings.
1512 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1513 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1514 * m10200-dis.c (disassemble): Likewise.
1515 * m10300-dis.c (disassemble): Likewise.
1516 * ns32k-dis.c (print_insn_ns32k): Likewise.
1517 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1518 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1519 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1520 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1521 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1522 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1523 * tic80-dis.c (print_one_instruction): Likewise.
1524 * w65-dis.c (print_operand): Likewise.
1525 * z8k-dis.c (fetch_data): Likewise.
1526 * a29k-dis.c: Add return type for find_byte_func_type.
1527 * arc-opc.c: Include <stdio.h>. Remove declarations of
1528 insert_multshift and extract_multshift.
1529 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1531 (extract_value): Fully parenthesize expression.
1532 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1533 * h8500-opc.h (h8500_table): Fully bracket initializer.
1534 * w65-opc.h (optable): Likewise.
1535 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1536 * i386-dis.c (OP_E): Initialize local variables.
1537 * m10200-dis.c (print_insn_mn10200): Likewise.
1538 * mips-dis.c (print_insn_mips16): Likewise.
1539 * sh-dis.c (print_insn_shx): Likewise.
1540 * v850-dis.c (print_insn_v850): Likewise.
1541 * ns32k-dis.c (print_insn_arg): Declare.
1542 (get_displacement, invalid_float): Declare.
1543 (list_search, sign_extend, flip_bytes): Declare return type.
1544 (get_displacement): Likewise.
1545 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1547 (print_insn_ns32k): Make i unsigned.
1548 (invalid_float): Make static. Declare type of val.
1549 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1550 on each for iteration.
1551 * tic30-dis.c (get_indirect_operand): Likewise.
1552 * z8k-dis.c (print_insn_z8001): Declare return type.
1553 (print_insn_z8002): Likewise.
1554 (unparse_instr): Fix sprintf format strings.
1556 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1558 * mips-opc.c: Add "sync.l" and "sync.p".
1560 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1562 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1563 default m68k variant to recognize.
1565 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1566 (ctrl, cobr, mem, ea): Likewise.
1567 (print_addr): Likewise. Remove cast.
1568 (ea): Cast argument of print_addr to bfd_vma.
1570 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1572 (cgen_parse_unsigned_integer): Likewise.
1573 (cgen_parse_address): Likewise.
1575 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1577 * i960-dis.c (ctrl): Add full braces to structure initialization.
1578 (cobr, mem, reg): Likewise.
1579 (ea): Correct parenthesization in expression.
1581 * cgen-asm.c: Include <ctype.h>.
1582 (build_asm_hash_table): Remove unused local variable i.
1583 (cgen_parse_keyword): Add casts to avoid warnings.
1585 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1586 symbol. Fix indentation.
1587 (print_insn_little_arm): Likewise.
1589 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1591 * configure.in: Use AM_DISABLE_SHARED.
1592 * aclocal.m4, configure: Rebuild with libtool 1.2.
1594 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1596 These patches are courtesy of Jonathan Walton and Tony Thompson
1597 (athompso@cambridge.arm.com).
1599 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1602 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1603 both the offset and the label closest to the destination.
1605 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1607 * m32r-opc.h: Regenerate.
1609 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1611 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1613 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1615 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1616 assume that info->symbols is non-empty.
1618 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1620 * alpha-opc.c (cvtqs) There is no such thing.
1621 (cvttq): Missing most of the /*d variants.
1623 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1625 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1626 delayed branches or jumps.
1628 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1630 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1632 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1633 * tic30-dis.c (print_branch): Likewise.
1635 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1637 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1638 saved_symbol code as it is no longer needed.
1640 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1642 * cgen-asm.c: Include symcat.h.
1643 * cgen-dis.c,cgen-opc.c: Ditto.
1644 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1646 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1648 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1650 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1652 * m32r-opc.[ch]: Regenerate.
1654 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1656 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1657 arguments. Don't perform validation here.
1658 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1660 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1662 * m32r-opc.c: Regenerate.
1664 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1666 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1667 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1669 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1671 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1673 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1675 * configure.in: Get the version number from BFD.
1676 * configure: Rebuild.
1678 From H.J. Lu <hjl@gnu.org>:
1679 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1680 * Makefile.in: Rebuild.
1682 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1684 * m32r-opc.c: Regenerate.
1685 * m32r-opc.h: Regenerate.
1687 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1689 * m32r-opc.c: Regenerate.
1691 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1693 Fix rac to accept only a0:
1694 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1695 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1696 Introduce OPERAND_GPR.
1697 * d10v-dis.c (print_operand): Likewise.
1699 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1701 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1702 (cgen_hw_lookup): Make result const.
1703 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1705 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1707 * configure, aclocal.m4: Rebuild with new libtool.
1709 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1711 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1712 instructions use a PC relative branch, not absolute.
1714 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1716 * configure.in: Set libtool_enable_shared rather than
1717 libtool_shared. Remove diversion hack.
1718 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1720 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1722 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1723 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1725 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1727 * tic30-dis.c: New file.
1728 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1729 * configure.in: Handle bfd_tic30_arch.
1730 * Makefile.am: Rebuild dependencies.
1731 (CFILES): Add tic30-dis.c
1732 (ALL_MACHINES): Add tic30-dis.lo.
1733 * configure, Makefile.in: Rebuild.
1735 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1737 * m32r-opc.h (HAVE_CPU_M32R): Define.
1739 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1741 * v850-opc.c (insertion routines): If both alignment and size is
1742 wrong then report this.
1744 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1746 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1747 Only recognize instructions for the current target_processor.
1749 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1751 * d10v-dis.c (PC_MASK): Correct value.
1752 (print_operand): If there's a reloc, don't calculate the
1753 address because they could be in different sections.
1755 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1757 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1758 instruction after the 4650's "mul" instruction; nobody's using the
1759 4010 these days. If object files someday indicate which processor
1760 variant they're intended for, we can do a better job at this.
1762 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1764 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1765 table provided entry size. Use CGEN_INSN_MNEMONIC.
1766 (cgen_parse_keyword): Rewrite.
1767 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1768 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1769 * cgen-opc.c: Clean up pass over `struct foo' usage.
1770 (cgen_keyword_lookup_value): Handle "" entry.
1771 (cgen_keyword_add): Likewise.
1773 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1775 * mips-opc.c: Add FP_D to s.d instruction flags.
1777 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1779 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1781 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1783 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1784 PC relative offset forms before the 15 bit forms. An assembler command
1785 line option now chooses the default.
1787 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1789 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1790 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1792 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1794 * configure: Only build libopcodes shared if --enable-shared's value
1795 was `yes', or was set to `*opcodes*'.
1796 * aclocal.m4: Likewise.
1797 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1798 original source of this bit of code. It's not clear what the best fix
1801 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1803 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1804 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1805 offset forms before the 15 bit forms, to default to the long forms.
1807 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1809 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1811 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1813 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1814 symbol if none is present.
1815 (print_insn_big_arm): Prevent examination of stored symbol if
1818 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1820 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1822 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1824 * disassemble.c: Remove disasm_symaddr() function.
1826 * arm-dis.c: Use info->symbol instead of info->flags to determine
1827 if disassmbly should be in Thumb or Arm mode.
1829 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1831 * arm-dis.c: Add support for disassembling Thumb opcodes.
1832 (print_insn_thumb): New function.
1834 * disassemble.c (disasm_symaddr): New function.
1836 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1837 (thumb_opcodes): Table of Thumb opcodes.
1839 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1841 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1843 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1844 and 'v' as operand types.
1846 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1848 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1849 <olivier.carmona@di.epfl.ch>.
1850 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1851 which has a two word opcode with a one word argument.
1853 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1855 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1856 unsigned, not signed.
1857 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1859 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1861 * d10v-dis.c (print_operand):
1862 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1864 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1866 * d10v-opc.c (OPERAND_FLAG): Split into:
1867 (OPERAND_FFLAG, OPERAND_CFLAG) .
1871 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1873 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1874 field for all INSN_MACRO's.
1875 * mips16-opc.c: same
1877 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1879 * mips-opc.c (sync,cache): These are 3900 insns.
1881 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1883 sh-opc.h (sh_table): Remove ftst/nan.
1885 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1887 * mips-opc.c (ffc, ffs): Fix mask.
1889 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1891 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1894 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1896 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1897 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1899 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1901 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1902 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1904 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1906 * v850-dis.c (disassemble): Replace // with /* ... */
1908 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1910 * sparc-opc.c: Add wr & rd for v9a asr's.
1911 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1912 (v9a_asr_reg_names): New variable.
1913 Patch from David Miller <davem@vger.rutgers.edu>.
1915 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1917 * sparc-opc.c (v9notv9a): New insn type.
1918 (IMPDEP): Move to the end to not conflict with edge8 et al.
1919 Patch from David Miller <davem@vger.rutgers.edu>.
1921 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1923 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1925 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1927 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1929 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1931 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1932 of disassemble_info structure to determine if an overlay address
1933 has a matching symbol in low memory.
1935 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1936 new symbol_at_address_func field in disassemble_info structure.
1938 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1940 * v850-opc.c (extract_d22): Use signed arithmatic.
1942 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1944 * mips-opc.c: Three op mult is not an ISA insn.
1946 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1948 * mips-opc.c: Fix formatting.
1950 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1952 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1953 than assuming that char is signed. Explicitly sign extend 16 bit
1954 values, rather than assuming that short is 16 bits.
1955 (OP_sI, OP_J, OP_DIR): Likewise.
1957 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1959 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1962 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1964 * v850-opc.c: Fix typo in comment.
1966 * v850-dis.c (disassemble): Add test of processor type when
1967 determining opcodes.
1969 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1971 * configure.in: Use a diversion to set enable_shared before the
1972 arguments are parsed.
1973 * configure: Rebuild.
1975 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1977 * m68k-opc.c (TBL1): Use ! rather than `.
1978 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1980 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1982 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1984 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1986 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1989 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1990 * aclocal.m4: Rebuild with new libtool.
1991 * configure: Rebuild.
1993 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1995 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1997 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1999 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2001 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2003 * v850-opc.c (v850_opcodes): Further rearrangements.
2005 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2007 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2009 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2011 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2014 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2016 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2018 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2020 * v850-opc.c: Initialise processors field of v850_opcode structure.
2022 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2024 Merge changes from Martin Hunt:
2026 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2028 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2029 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2030 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2032 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2034 * d30v-dis.c (print_insn): First operand of d*i (delayed
2035 branch) instructions is relative.
2037 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2038 (d30v_operand_table): Add IMM6S3 type.
2039 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2041 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2042 and cmp instructions.
2044 * d30v-opc.c: Correct entries for repeat*, and sat*.
2045 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2046 types. Correct several formats.
2048 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2050 * d30v-opc.c (pre_defined_registers): Change control registers.
2052 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2053 SHORT_C2. Manual was incorrect.
2055 * d30v-dis.c (lookup_opcode): Return value now indicates
2056 if an opcode has a short and a long form. Used for deciding
2057 to append a ".s" or ".l".
2058 (print_insn): Append a ".s" to an instruction if it is
2059 the short form and ".l" if it is a long form. Do not append
2060 anything if the instruction has only one possible size.
2062 * d30v-opc.c: Change mulx2h to require an even register.
2063 New form: SHORT_A2; a SHORT_A form that needs an even
2064 register as the first operand.
2066 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2067 instruction was not being disassembled if there were an odd
2068 number of instructions.
2070 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2072 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2074 * v850-dis.c (disassemble): Improved display of register lists.
2076 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2078 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2079 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2080 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2081 fandnot1s, fandnot2s.
2083 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2085 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2087 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2089 * cgen-asm.c (cgen_parse_address): New argument resultp.
2090 All callers updated.
2091 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2093 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2095 * mn10200-dis.c (disassemble): PC relative instructions are
2096 relative to the next instruction, not the current instruction.
2098 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2100 * v850-dis.c (disassemble): Only signed extend values that are not
2101 returned by extract functions.
2102 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2104 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2106 * v850-opc.c: Update comments. Remove use of
2107 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2109 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2111 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2113 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2115 * configure: Rebuilt with latest devo autoconf for NT support.
2117 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2119 * v850-dis.c (disassemble): Use curly brace syntax for register
2122 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2123 where r0 is being used as a destination register.
2125 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2127 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2129 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2131 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2133 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2135 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2136 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2139 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2141 * configure (cgen_files): Add support for v850e target.
2142 * configure.in (cgen_files): Add support for v850e target.
2144 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2146 * configure (cgen_files): Add support for v850ea target.
2147 * configure.in (cgen_files): Add support for v850ea target.
2149 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2151 * configure.in (bfd_arc_arch): Add.
2152 * configure: Rebuild.
2153 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2154 * Makefile.in: Rebuild.
2155 * arc-dis.c, arc-opc.c: New files.
2156 * disassemble.c (ARCH_all): Define ARCH_arc.
2157 (disassembler): Add ARC support.
2159 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2161 * v850-dis.c (disassemble): Add support for v850EA instructions.
2163 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2164 (v850_opcodes): Add v850EA instructions.
2166 * v850-dis.c (disassemble): Add support for v850E instructions.
2168 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2169 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2170 insert_spe, extract_spe): New Functions.
2171 (v850_opcodes): Add v850E instructions.
2173 * v850-opc.c: Reorganised and re-layed out to improve readability
2176 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2178 * configure: Rebuild with autoconf 2.12.1.
2180 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2182 * aclocal.m4, configure: Rebuild with new automake patches.
2184 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2186 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2187 * acinclude.m4: Just include acinclude.m4 from BFD.
2188 * aclocal.m4, configure: Rebuild.
2190 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2192 * Makefile.am: New file, based on old Makefile.in.
2193 * acconfig.h: New file.
2194 * acinclude.m4: New file.
2195 * stamp-h.in: New file.
2196 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2197 Removed shared library handling; now handled by libtool. Replace
2198 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2199 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2200 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2201 handling in AC_OUTPUT.
2202 * dep-in.sed: Change .o to .lo.
2203 * Makefile.in: Now built with automake.
2204 * aclocal.m4: Now built with aclocal.
2205 * config.in, configure: Rebuild.
2207 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2209 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2211 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2213 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2215 * sparc-dis.c (sorted_opcodes): New static local.
2216 (struct opcode_hash): `opcode' is pointer to const element.
2217 (build_hash): First arg is now table of sorted pointers.
2218 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2219 (compare_opcodes): Update.
2221 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2223 * cgen-opc.c: #include <ctype.h>.
2224 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2225 Handle case insensitive hashing.
2226 (hash_keyword_value): Change type of `value' to unsigned int.
2228 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2230 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2231 precision FP, mark it as such. Likewise for double precision
2232 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2235 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2237 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2239 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2240 nesting depth when all the macros are expanded.
2242 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2244 * sparc-opc.c: The fcmp v9a instructions take an integer register
2245 as a destination, not a floating point register. From Christian
2246 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2248 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2250 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2251 syntax. From Roman Hodek
2252 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2254 * i386-dis.c (twobyte_has_modrm): Fix pand.
2256 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2258 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2260 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2262 * arm-dis.c: Add prototypes for arm_decode_shift and
2265 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2267 * mips-opc.c: Add r3900 insns.
2269 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2271 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2272 print delay slot instructions on the same line. When using a PC
2273 relative load, add a comment with the value being loaded if it can
2276 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2278 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2279 to pushS/popS for segment regs and byte constant so that
2280 pushw/popw printed when in 16 bit data mode.
2282 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2283 print cbtw, cwtd in 16 bit data mode.
2284 * i386-dis.c (putop): extra case W to support above.
2286 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2287 address size prefix in 16 bit address mode.
2289 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2291 * sh-dis.c: Reindent. Rename local variable fprintf to
2294 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2296 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2298 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2300 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2302 * mips16-opc.c (mip16_opcodes): same.
2304 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2306 * m68k-opc.c (moveb): Change $d to %d.
2308 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2310 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2311 (twobyte_has_modrm): Likewise.
2313 (OP_MMX, OP_EM, OP_MS): New static functions.
2315 * i386-dis.c: Revert patch of April 4. The output now matches
2318 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2320 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2323 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2325 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2327 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2329 * Makefile.in (install): Depend upon installdirs.
2330 (installdirs): New target.
2332 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2334 From Thomas Graichen <graichen@rzpd.de>:
2335 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2336 * configure: Rebuild.
2338 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2340 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2341 Delete string{,s}.h support.
2343 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2345 * cgen-asm.c (cgen_parse_operand_fn): New global.
2346 (cgen_parse_{{,un}signed_integer,address}): Update call to
2347 cgen_parse_operand_fn.
2348 (cgen_init_parse_operand): New function.
2349 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2350 from cgen_asm_init_parse.
2351 (m32r_cgen_assemble_insn): New operand `errmsg'.
2352 Delete call to as_bad, return error message to caller.
2353 (m32r_cgen_asm_hash_keywords): #if 0 out.
2355 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2357 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2359 [case 'J']: Fix typo in register name.
2361 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2363 * configure.in: Substitute SHLIB_LIBS.
2364 * configure: Rebuild.
2365 * Makefile.in (SHLIB_LIBS): New variable.
2366 ($(SHLIB)): Use $(SHLIB_LIBS).
2368 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2370 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2372 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2374 * disassemble.c (disassembler): Handle m32r.
2376 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2378 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2379 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2380 * Makefile.in (CFILES): Add them.
2381 (ALL_MACHINES): Add them.
2382 (dependencies): Regenerate.
2383 * configure.in (cgen_files): New variable.
2384 (bfd_m32r_arch): Add entry.
2385 * configure: Regenerate.
2387 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2389 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2390 * configure: Rebuild.
2392 * Makefile.in: Rebuild dependencies.
2394 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2396 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2399 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2401 * Branched binutils 2.8.
2403 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2405 * m10200-dis.c: Rename from mn10200-dis.c.
2406 * m10200-opc.c: Rename from mn10200-opc.c.
2407 * m10300-dis.c: Rename from mn10300-dis.c
2408 * m10300-opc.c: Rename from mn10300-opc.c.
2409 * Makefile.in: Update accordingly.
2411 * mips16-opc.c: Add mul and dmul macros.
2413 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2415 * makefile.vms: Update CFLAGS, add clean target.
2417 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2419 * mips-opc.c: Add "wait". From Ralf Baechle
2420 <ralf@gnu.ai.mit.edu>.
2422 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2423 * configure, config.in: Rebuild.
2424 * sysdep.h: Include <stdlib.h> if it exists.
2425 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2427 * Makefile.in: Rebuild dependencies.
2429 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2431 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2432 Andrew Bray <andy@madhouse.demon.co.uk>.
2434 * mips-opc.c: Add cast when setting mips_opcodes.
2436 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2438 * v850-dis.c (disassemble): Fix sign extension problem.
2439 * v850-opc.c (extract_d*): Fix sign extension problems to make
2440 disassembly calculate branch offsets correctly.
2442 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2444 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2446 * mips-opc.c: Add dctr and dctw.
2448 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2450 * d30v-dis.c (print_insn): Change the way signed constants
2453 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2455 * Makefile.in (BFD_H): New variable.
2456 (HFILES): New variable.
2457 (CFILES): Add all C files.
2458 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2459 Delete old dependencies, and build new ones.
2460 * dep-in.sed: New file.
2462 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2464 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2466 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2468 * mn10200-opc.c: Change "trap" to "syscall".
2469 * mn10300-opc.c: Add new "syscall" instruction.
2471 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2473 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2474 mulul insns on the coldfire.
2476 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2478 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2479 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2480 (print_insn_little_arm): Likewise.
2482 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2484 Based on patches from H.J. Lu <hjl@lucon.org>:
2485 * i386-dis.c (fetch_data): Add prototype.
2486 * m68k-dis.c (fetch_data): Add prototype.
2487 (dummy_print_address): Add prototype. Make static.
2488 * ppc-opc.c (valid_bo): Add prototype.
2489 * sparc-dis.c (build_hash_table): Add prototype.
2490 (is_delayed_branch, compute_arch_mask): Add prototypes.
2491 (print_insn_sparc): Make several local variables const.
2492 (compare_opcodes): Change arguments to const PTR. Add prototype.
2493 * sparc-opc.c (arg): Change name field to be const.
2494 (lookup_name, lookup_value): Add prototypes. Change table and
2495 name parameters to be const.
2496 (sparc_encode_asi): Change name parameter to be const.
2497 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2498 (sparc_encode_sparclet_cpreg): Likewise.
2499 (sparc_decode_asi): Change return type to be const.
2500 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2501 (sparc_decode_sparclet_cpreg): Likewise.
2503 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2505 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2506 Solaris doesn't like the combined options, and the -f is
2508 (stamp-tshlink, install): Likewise.
2510 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2512 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2515 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2517 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2519 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2521 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2524 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2526 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2528 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2530 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2532 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2534 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2536 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2538 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2539 floatformat_to_double to make portable.
2540 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2543 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2545 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2546 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2548 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2550 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2551 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2553 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2555 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2556 (OFF_SL_BR_SCALED): ... to this, and added the flag
2557 TIC80_OPERAND_BASEREL to the flags word.
2558 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2561 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2563 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2564 Change mips_opcodes from const array to a pointer,
2565 and change bfd_mips_num_opcodes from const int to int,
2566 so that we can increase the size of the mips opcodes table
2569 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2571 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2572 store BITNUM values in the table in one's complement form
2573 to match behavior when assembler is given a raw numeric
2574 value for a BITNUM operand.
2575 * tic80-dis.c (print_operand_bitnum): Ditto.
2577 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2579 * d30v-opc.c: Removed references to FLAG_X.
2581 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2583 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2585 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2587 * Makefile.in: Added d30v object files.
2588 * configure: (bfd_d30v_arch) Rebuilt.
2589 * configure.in: (bfd_d30v_arch) Added new case.
2590 * d30v-dis.c: New file.
2591 * d30v-opc.c: New file.
2592 * disassemble.c (disassembler) Add entry for d30v.
2594 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2596 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2597 representations for the floating point BITNUM values.
2599 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2601 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2602 in the table in one's complement form, as they appear in the
2604 (tic80_symbol_to_value): Use macros to access predefined
2606 (tic80_value_to_symbol): Ditto.
2607 (tic80_next_predefined_symbol): New function.
2608 * tic80-dis.c (print_operand_bitnum): Remove code that did
2609 one's complement for BITNUM values.
2611 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2613 * makefile.vms: Remove 8 bit characters. Update to latest
2616 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2618 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2620 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2622 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2623 (IMM24_PCREL): Likewise.
2625 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2627 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2628 address for an extended PC relative instruction that is not a
2631 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2633 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2636 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2638 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2639 (tic80_opcodes): Sort entries so that long immediate forms
2640 come after short immediate forms, making it easier for
2641 assembler to select the right one for a given operand.
2643 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2645 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2647 (print_insn_mips16): Likewise.
2649 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2651 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2652 a symbol class that restricts translation to just that
2653 class (general register, condition code, etc).
2655 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2657 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2658 and REG_DEST_E for register operands that have to be
2659 an even numbered register. Add REG_FPA for operands that
2660 are one of the floating point accumulator registers.
2661 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2662 (tic80_opcodes): Change entries that need even numbered
2663 register operands to use the new operand table entries.
2664 Add "or" entries that are identical to "or.tt" entries.
2666 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2668 * mips16-opc.c: Add new cases of exit instruction for
2670 * mips-dis.c (print_mips16_insn_arg): Display floating point
2671 registers in operands of exit instruction. Print `$' before
2672 register names in operands of entry and exit instructions.
2674 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2676 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2677 pairs for all predefined symbols recognized by the assembler.
2678 Also used by the disassembling routines.
2679 (tic80_symbol_to_value): New function.
2680 (tic80_value_to_symbol): New function.
2681 * tic80-dis.c (print_operand_control_register,
2682 print_operand_condition_code, print_operand_bitnum):
2683 Remove private tables and use tic80_value_to_symbol function.
2685 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2687 * d10v-dis.c (print_operand): Change address printing
2688 to correctly handle PC wrapping. Fixes PR11490.
2690 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2692 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2695 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2697 * mips-dis.c (print_insn_mips16): Set insn_info information.
2698 (print_mips16_insn_arg): Likewise.
2700 * mips-dis.c (print_insn_mips16): Better handling of an extend
2701 opcode followed by an instruction which can not be extended.
2703 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2705 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2706 coldfire moveb instruction to not allow an address register as
2707 destination. Although the documentation does not indicate that
2708 this is invalid, experiments uncovered unexpected behavior.
2709 Added a comment explaining the situation. Thanks to Andreas
2710 Schwab for pointing this out to me.
2712 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2714 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2715 entries are presorted so that entries with the same mnemonic are
2716 adjacent to each other in the table. Sort the entries for each
2717 instruction so that this is true.
2719 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2721 * m68k-dis.c: Include <libiberty.h>.
2722 (print_insn_m68k): Sort the opcode table on the most significant
2723 nibble of the opcode.
2725 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2727 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2728 "vsub", "vst", "xnor", and "xor" instructions.
2729 (V_a1): Renamed from V_a, msb of accumulator reg number.
2730 (V_a0): Add macro, lsb of accumulator reg number.
2732 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2734 * tic80-dis.c (print_insn_tic80): Broke excessively long
2735 function up into several smaller ones and arranged for
2736 the instruction printing function to be callable recursively
2737 to print vector instructions that have both a load and a
2738 math instruction packed into a single opcode.
2739 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2740 to explain why it comes after the other vector opcodes.
2742 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2744 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2745 move insns to handle immediate operands.
2747 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2749 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2750 fix operand mask in the "moveml" entries for the coldfire.
2752 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2754 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2755 New macros for building vector instruction opcodes.
2756 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2757 FMT_LI, which were unused. The field is now a flags field.
2758 Remove some opcodes that are possible, but illegal, such
2759 as long immediate instructions with doubles for immediate
2760 values. Add "vadd" and "vld" instructions.
2762 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2764 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2765 the order more logical. Move the shift alias instructions ("rotl",
2766 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2767 interspersed with the regular sr.x and sl.x instructions. Add
2768 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2769 "sub", "subu", "swcr", and "trap".
2771 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2773 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2774 (OFF_SL_PC): Renamed from OFF_SL.
2775 (OFF_SS_BR): New operand type for base relative operand.
2776 (OFF_SL_BR): New operand type for base relative operand.
2777 (REG_BASE): New operand type for base register operand.
2778 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2779 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2780 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2782 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2783 10 char field, padded with spaces on rhs, rather than a string
2784 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2785 than old TIC80_OPERAND_RELATIVE. Add support for new
2786 TIC80_OPERAND_BASEREL flag bit.
2788 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2790 * tic80-dis.c (print_insn_tic80): Print floating point operands
2792 * tic80-opc.c (SPFI): Add single precision floating point
2793 immediate operand type.
2794 (ROTATE): Add rotate operand type for shifts.
2795 (ENDMASK): Add for shifts.
2796 (n): Macro for the 'n' bit.
2797 (i): Macro for the 'i' bit.
2798 (PD): Macro for the 'PD' field.
2799 (P2): Macro for the 'P2' field.
2800 (P1): Macro for the 'P1' field.
2801 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2804 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2806 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2807 adding in current address for pc-relative operands.
2809 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2811 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2812 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2813 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2814 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2815 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2816 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2817 (REG_SCALED, LSI_SCALED): New operand types.
2818 (E): New macro for 'E' bit at bit 27.
2819 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2820 opcodes, including the various size flavors (b,h,w,d) for
2821 the direct load and store instructions.
2823 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2825 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2827 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2828 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2829 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2830 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2831 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2832 masks with "MASK_* & ~M_*" to get the M bit reset.
2833 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2835 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2837 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2838 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2839 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2841 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2842 CC, SICR, and LICR table entries.
2843 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2844 "bcnd", and "brcr" opcodes.
2846 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2848 * ppc-opc.c (powerpc_operands): Make comment match the
2849 actual fields (no shift field).
2850 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2851 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2852 partial implementation, work in progress.
2853 * tic80-opc.c (tic80_operands): Begin construction operands table.
2854 (tic80_opcodes): Continue populating opcodes table and start
2855 filling in the operand indices.
2856 (tic80_num_opcodes): Add this.
2858 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2860 * m68k-opc.c: Add #B case for moveq.
2862 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2864 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2865 before they are used.
2867 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2869 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2870 for "breakpoint" instruction.
2872 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2874 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2875 (dep): Use ALL_CFLAGS rather than CFLAGS.
2877 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2879 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2882 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2884 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2885 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2887 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2889 * mips16-opc.c: Add "abs".
2891 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2893 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2894 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2895 (disassembler): Add bfd_arch_tic80 support to set disassemble
2896 to print_insn_tic80.
2897 * tic80-dis.c (print_insn_tic80): Add stub.
2899 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2901 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2902 * configure: Regenerate with autoconf.
2903 * tic80-dis.c: Add file.
2904 * tic80-opc.c: Add file.
2906 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2908 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2910 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2912 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2913 (mn10200_opcodes): Use it for some logicals and btst insns.
2914 Add "break" and "trap" instructions.
2916 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2918 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2920 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2922 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2923 relative load or add now depends upon whether the instruction is
2926 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2928 * mn10200-dis.c: Finish writing disassembler.
2929 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2930 Fix mask for "jmp (an)".
2932 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2933 handle endianness issues for mn10300.
2935 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2937 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2939 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2940 instruction. Fix opcode field for "movb (imm24),dn".
2942 * mn10200-opc.c (mn10200_operands): Fix insertion position
2945 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2947 * mn10200-opc.c: Create mn10200 opcode table.
2948 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2949 but moving along nicely.
2951 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2953 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2955 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2957 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2958 specifiers for fmovem* instructions.
2960 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2962 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2964 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2966 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2969 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2971 * mn10300-opc.c: Add some comments explaining the various
2974 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2976 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2978 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2981 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2982 operand specifiers in fmovm* instructions.
2984 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2986 * ppc-opc.c (insert_li): Give an error if the offset has the two
2987 least significant bits set.
2989 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2991 * mips-dis.c (print_insn_mips16): Separate the instruction from
2992 the arguments with a tab, not a space.
2994 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2996 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2999 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3002 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3004 * configure: Rebuild with autoconf 2.12.
3006 Add support for mips16 (16 bit MIPS implementation):
3007 * mips16-opc.c: New file.
3008 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3009 (mips16_reg_names): New static array.
3010 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3011 after seeing a 16 bit symbol.
3012 (print_insn_little_mips): Likewise.
3013 (print_insn_mips16): New static function.
3014 (print_mips16_insn_arg): New static function.
3015 * mips-opc.c: Add jalx instruction.
3016 * Makefile.in (mips16-opc.o): New target.
3017 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3018 * configure: Rebuild.
3020 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3022 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3023 operand specifiers in *save, *restore and movem* instructions.
3025 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3028 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3029 register operands for immediate arithmetic, not, neg, negx, and
3030 set according to condition instructions.
3032 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3033 specifier of the effective-address operand in immediate forms of
3034 arithmetic instructions. The specifier for the immediate operand
3035 notes how and where the constant will be stored.
3037 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3039 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3042 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3045 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3047 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3049 * mn10300-dis.c (disassemble): Handle register lists.
3051 * mn10300-opc.c: Fix handling of register list operand for
3052 "call", "ret", and "rets" instructions.
3054 * mn10300-dis.c (disassemble): Print PC-relative and memory
3055 addresses symbolically if possible.
3056 * mn10300-opc.c: Distinguish between absolute memory addresses,
3057 pc-relative offsets & random immediates.
3059 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3061 (disassemble): Handle SPLIT and EXTENDED operands.
3063 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3065 * mn10300-dis.c: Rough cut at printing some operands.
3067 * mn10300-dis.c: Start working on disassembler support.
3068 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3070 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3072 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3074 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3076 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3078 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3080 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3081 register argument is calls and jmp instructions.
3083 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3085 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3086 getx operand. Fix opcode for mulqu imm,dn.
3088 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3090 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3091 in MN10300_OPERAND_SPLIT operands for how many bits
3092 appear in the basic insn word. Add IMM32_HIGH24,
3093 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3094 (mn10300_opcodes): Use new operands as needed.
3096 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3097 for bset, bclr, btst instructions.
3098 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3100 * mn10300-opc.c (mn10300_operands): Remove many redundant
3101 operands. Update opcode table as appropriate.
3102 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3103 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3105 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3107 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3108 operands (for indexed load/stores). Fix bitpos for DI
3109 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3110 few instructions that insert immediates/displacements in the
3111 middle of the instruction. Add IMM8E for 8 bit immediate in
3112 the extended part of an instruction.
3113 (mn10300_operands): Use new opcodes as appropriate.
3115 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3117 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3118 sequential so the assembler never parallelizes it with
3121 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3123 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3124 a data/address register that appears in register field 0
3125 and register field 1.
3126 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3128 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3130 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3131 standard disassembly.
3133 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3134 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3135 Recategorize PALcode instructions.
3137 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3139 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3141 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3143 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3144 there are no operand types.
3146 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3148 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3150 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3152 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3154 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3156 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3158 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3159 and sst.w instructions.
3161 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3164 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3166 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3169 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3171 * ppc-opc.c (PPCPWR2): Define.
3172 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3175 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3177 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3178 field for movhu instruction.
3180 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3181 cast value to "long" not "signed long" to keep hpux10
3184 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3186 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3189 * mn10300-opc.c (FMT*): Remove definitions.
3191 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3192 for shift-by-register opcodes.
3194 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3195 into [AD][MN][01] for encoding the position of the register
3198 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3200 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3201 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3203 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3205 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3206 Fix various typos. Add "PAREN" operand.
3207 (MEM, MEM2): Define.
3208 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3209 operands. Fix several typos.
3211 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3214 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3216 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3217 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3219 (mn10300_opcodes): Break opcode format out into its own field.
3220 Update many operand fields to deal with signed vs unsigned
3221 issues. Fix one or two typos in the "mov" instruction
3222 opcode, mask and/or operand fields.
3224 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3226 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3227 m68851 wasn't reset.
3229 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3231 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3232 all opcodes. Very rough cut at operands for all opcodes.
3234 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3237 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3239 * mn10200-opc.c, mn10300-opc.c: New files.
3240 * mn10200-dis.c, mn10300-dis.c: New files.
3241 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3242 * disassemble.c: Break mn10x00 support into 10200 and 10300
3244 * configure.in: Likewise.
3245 * configure: Rebuilt.
3247 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3249 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3251 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3253 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3255 * disassemble (ARCH_mn10x00): Define.
3256 (disassembler): Handle bfd_arch_mn10x00.
3257 * configure.in: Recognize bfd_mn10x00_arch.
3258 * configure: Rebuilt.
3260 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3262 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3263 accordingly. Don't declare functions using op_rtn.
3265 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3267 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3268 params to be more standard.
3269 * (disassemble): Print absolute addresses and symbolic names for
3270 branch and jump targets.
3271 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3273 * (v850_opcodes): Add breakpoint insn.
3275 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3277 * m68k-opc.c: Move the fmovemx data register cases before the
3278 other cases, so that they get recognized before the data register
3279 does gets treated as a degenerate register list.
3281 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3283 * mips-opc.c: Add a case for "div" and "divu" with two registers
3284 and a destination of $0.
3286 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3288 * mips-dis.c (print_insn_arg): Add prototype.
3289 (_print_insn_mips): Ditto.
3291 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3293 * mips-dis.c (print_insn_arg): Print condition code registers as
3296 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3298 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3300 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3302 * v850-dis.c (disassemble): Make static. Provide prototype.
3304 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3306 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3309 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3311 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3312 ']' characters into the output stream.
3313 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3314 Add "memop" field to all opcodes (for the disassembler).
3315 Reorder opcodes so that "nop" comes before "mov" and "jr"
3316 comes before "jarl".
3318 * v850-dis.c (print_insn_v850): Fix typo in last change.
3320 * v850-dis.c (print_insn_v850): Properly handle disassembling
3321 a two byte insn at the end of a memory region when the memory
3322 region's size is only two byte aligned.
3324 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3326 * v850-dis.c (v850_reg_names): Define.
3327 (v850_sreg_names, v850_cc_names): Likewise.
3328 (disassemble): Very rough cut at printing operands (unformatted).
3330 * v850-opc.c (BOP_MASK): Fix.
3331 (v850_opcodes): Fix mask for jarl and jr.
3333 * v850-dis.c: New file. Skeleton for disassembler support.
3334 * Makefile.in Remove v850 references, they're not needed here.
3335 * configure.in: Add v850-dis.o when building v850 toolchains.
3336 * configure: Rebuilt.
3337 * disassemble.c (disassembler): Call v850 disassembler.
3339 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3340 (insert_d8_6, extract_d8_6): New functions.
3341 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3342 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3344 (IF4A, IF4B): Use "D7" instead of "D7S".
3345 (IF4C, IF4D): Use "D8_7" instead of "D8".
3346 (IF4E, IF4F): New. Use "D8_6".
3347 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3348 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3350 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3351 (v850_operands): Change D16 to D16_15, use special insert/extract
3352 routines. New new D16 that uses the generic insert/extract code.
3353 (IF7A, IF7B): Use D16_15.
3354 (IF7C, IF7D): New. Use D16.
3355 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3357 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3358 message. Issue an error if the branch offset is odd.
3360 * v850-opc.c: Add notes about needing special insert/extract
3361 for all the load/store insns, except "ld.b" and "st.b".
3363 * v850-opc.c (insert_d22, extract_d22): New functions.
3364 (v850_operands): Use insert_d22 and extract_d22 for
3366 (insert_d9): Fix range check.
3368 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3370 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3371 and set bits field to D9 and D22 operands.
3373 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3375 * v850-opc.c (v850_operands): Define SR2 operand.
3376 (v850_opcodes): "ldsr" uses R1,SR2.
3378 * v850-opc.c (v850_opcodes): Fix opcode specs for
3379 sld.w, sst.b, sst.h, sst.w, and nop.
3381 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3383 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3384 end of the opcode table.
3386 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3388 * d10v-opc.c (pre_defined_registers): Added register pairs,
3389 "r0-r1", "r2-r3", etc.
3391 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3393 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3394 Create I16U for an unsigned 16bit mmediate operand.
3395 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3397 * v850-opc.c (v850_operands): Define EP operand.
3398 (IF4A, IF4B, IF4C, IF4D): Use EP.
3400 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3401 with immediate operand, "movhi". Tweak "ldsr".
3403 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3404 correct. Get sld.[bhw] and sst.[bhw] closer.
3406 * v850-opc.c (v850_operands): "not" is a two byte insn
3408 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3410 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3412 * v850-opc.c (two): Get order of words correct.
3414 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3416 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3417 register source and destination operands.
3418 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3420 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3421 same thinko in "trap" opcode.
3423 * v850-opc.c (v850_opcodes): Add initializer for size field
3426 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3427 Add D8 for 8-bit unsigned field in short load/store insns.
3428 (IF4A, IF4D): These both need two registers.
3429 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3430 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3431 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3432 for "ldsr" and "stsr".
3433 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3436 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3437 short store word (sst.w).
3439 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3441 * v850-opc.c (v850_operands): Added insert and extract fields,
3442 pointers to functions that handle unusual operand encodings.
3444 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3446 * v850-opc.c (v850_opcodes): Enable "trap".
3448 * v850-opc.c (v850_opcodes): Fix order of displacement
3449 and register for "set1", "clr1", "not1", and "tst1".
3451 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3453 * v850-opc.c (v850_operands): Add "B3" support.
3454 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3457 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3459 * v850-opc.c: Close unterminated comment.
3461 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3463 * v850-opc.c (v850_operands): Add flags field.
3464 (v850_opcodes): add move opcodes.
3466 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3468 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3469 * configure: (bfd_v850v_arch) Add new case.
3470 * configure.in: (bfd_v850_arch) Add new case.
3471 * v850-opc.c: New file.
3473 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3475 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3477 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3479 * d10v-opc.c: Add additional information to the opcode
3480 table to help determinine which instructions can be done
3483 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3485 * mpw-make.sed: Update editing of include pathnames to be
3488 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3490 * arm-opc.h: Added "bx" instruction definition.
3492 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3494 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3496 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3498 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3500 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3502 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3504 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3506 * makefile.vms: Update for alpha-opc changes.
3508 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3510 * i386-dis.c (print_insn_i386): Actually return the correct value.
3511 (ONE, OP_ONE): #ifdef out; not used.
3513 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3515 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3516 Changed subi operand type to treat 0 as 16.
3518 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3520 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3523 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3525 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3526 memory transfer instructions. Add new format string entries %h and %s.
3527 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3530 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3532 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3533 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3535 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3537 * alpha-dis.c (print_insn_alpha_osf): Remove.
3538 (print_insn_alpha_vms): Remove.
3539 (print_insn_alpha): Make globally visible. Chose the register
3540 names based on info->flavour.
3541 * disassemble.c: Always return print_insn_alpha for the alpha.
3543 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3545 * d10v-dis.c (dis_long): Handle unknown opcodes.
3547 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3549 * d10v-opc.c: Changes to support signed and unsigned numbers.
3550 All instructions with the same name that have long and short forms
3551 now end in ".l" or ".s". Divs added.
3552 * d10v-dis.c: Changes to support signed and unsigned numbers.
3554 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3556 * d10v-dis.c: Change all functions to use info->print_address_func.
3558 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3560 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3561 move ccr/sr insns more strict so that the disassembler only
3562 selects them when the addressing mode is data register.
3564 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3565 * d10v-opc.c (pre_defined_registers): Declare.
3566 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3567 to pick a better name for the registers.
3569 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3571 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3572 operands for fexpand and fpmerge. From Christian Kuehnke
3573 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3575 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3577 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3578 print routine. Take new regnames and cpumask arguments.
3579 Kill the environment variable nonsense.
3580 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3581 (print_insn_alpha_vms): New function. Do VMS style regnames.
3582 * disassemble.c (disassembler): Test bfd flavour to pick
3583 between OSF and VMS routines. Default to OSF.
3585 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3587 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3588 * configure: Rebuild.
3589 * Makefile.in (install): Use @INSTALL_SHLIB@.
3591 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3593 * configure: (bfd_d10v_arch) Add new case.
3594 * configure.in: (bfd_d10v_arch) Add new case.
3595 * d10v-dis.c: New file.
3596 * d10v-opc.c: New file.
3597 * disassemble.c (disassembler) Add entry for d10v.
3599 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3601 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3602 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3604 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3606 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3607 distinguish between variants of the instruction set.
3608 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3609 distinguish between variants of the instruction set.
3611 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3613 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3614 the 8086 instruction set.
3615 * i386-dis.c: General cleanups. Make most things static. Add
3616 prototypes. Get rid of static variables aflags and dflags. Pass
3617 them as args (to almost everything).
3619 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3621 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3623 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3625 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3626 if the next arg is marked with SRC_IN_DST. Gross.
3628 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3629 we're looking for and find EXR.
3631 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3632 if we're looking for KBIT and we don't find it.
3634 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3637 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3638 3bit immediate operands.
3640 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3642 * Released binutils 2.7.
3644 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3645 <kkaempf@progis.ac-net.de>.
3647 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3649 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3651 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3653 * sparc-dis.c (print_insn_sparclite): New routine to print
3654 sparclite instructions.
3656 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3658 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3660 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3662 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3663 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3664 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3666 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3668 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3669 Use autoconf-set values.
3670 (docdir, oldincludedir): Removed.
3671 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3673 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3675 * alpha-opc.c: New file.
3676 * alpha-opc.h: Remove.
3677 * alpha-dis.c: Complete rewrite to use new opcode table.
3678 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3679 * configure: Rebuild with autoconf 2.10.
3680 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3681 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3683 (alpha-opc.o): New target.
3685 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3687 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3688 Set imm_added_to_rs1 even if the source and destination register
3691 * sparc-opc.c: Add some two operand forms of the wr instruction.
3693 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3695 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3698 * disassemble.c (disassembler): Handle H8/S.
3699 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3701 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3703 * sparc-opc.c: Add beq/teq as aliases for be/te.
3705 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3706 <sergei@msil.sps.mot.com>.
3708 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3710 * makefile.vms: New file.
3712 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3714 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3716 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3719 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3721 * i386-dis.c (OP_OFF): Call append_prefix.
3723 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3725 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3726 unsigned long to silence a warning from the Solaris PowerPC
3729 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3731 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3733 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3735 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3737 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3738 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3739 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3740 cpush, cpusha, cpull sparclet insns.
3742 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3744 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3746 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3748 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3749 Set F_FLOAT on other floating point instructions.
3751 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3753 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3755 (powerpc_opcodes): Add 860/821 specific SPRs.
3757 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3759 * configure.in: Permit --enable-shared to specify a list of
3760 directories. Set and substitute BFD_PICLIST.
3761 * configure: Rebuild.
3762 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3763 uses. Set to @BFD_PICLIST@.
3765 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3767 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3768 not "abs", which may be needed for the absolute in something
3769 like btst #0,@10:8. Print L_3 immediates separately from other
3770 immediates. Change ABSMOV reference to ABS8MEM.
3772 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3774 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3775 (current_arch_mask): New static global.
3776 (compute_arch_mask): New static function.
3777 (print_insn_sparc): Delete sparc_v9_p. New static local
3778 current_mach. Resort opcode table if current_mach changes.
3779 Generalize "insn not supported" test.
3780 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3781 Delete test for v9/!v9.
3782 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3784 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3785 (brfcx): Renamed to FBRX.
3786 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3787 coprocessor mnemonics are not supported on the sparclet).
3788 (condf): Renamed to CONDF.
3789 (SLCBCC2): Delete F_ALIAS flag.
3791 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3793 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3794 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3796 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3798 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3799 that the shared library version number is set correctly.
3801 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3803 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3804 Miles Bader <miles@gnu.ai.mit.edu>.
3805 * configure: Rebuild.
3807 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3809 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3812 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3814 * configure: Rebuild with autoconf 2.8.
3816 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3818 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3819 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3821 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3823 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3824 since they appear as targets in Makefile.in.
3825 * configure: Rebuild.
3827 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3829 * mpw-make.sed: Edit out shared library support bits.
3831 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3833 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3834 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3835 (sparc_opcodes): Add sparclet insns.
3836 (sparclet_cpreg_table): New static local.
3837 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3838 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3840 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3842 * i386-dis.c (index16): New static variable.
3843 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3845 (OP_indirE): Return result of OP_E.
3846 (OP_E): Check for 16 bit addressing mode, and disassemble
3847 correctly. Optimised 32 bit case a little. Don't print
3848 "(base,index,scale)" when sib specifies only an offset.
3850 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3852 * configure.in: Set and substitute SHLIB_DEP.
3853 * configure: Rebuild.
3854 * Makefile.in (SHLIB_DEP): New variable.
3855 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3856 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3857 COMMON_SHLIB, add them to piclist with appropriate modifications.
3858 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3859 here: just use piclist.
3861 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3863 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3864 (print_insn_sparc): Rewrite v9/not-v9 tests.
3865 (compare_opcodes): Likewise.
3866 * sparc-opc.c (MASK_<ARCH>): Define.
3867 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3868 (sparclet,v6notv9): Define.
3869 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3870 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3872 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3874 * configure.in: Call AC_PROG_CC before configure.host.
3875 * configure: Rebuild.
3877 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3879 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3881 * i386-dis.c (onebyte_has_modrm): New static array.
3882 (twobyte_has_modrm): New static array.
3883 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3885 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3887 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3890 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3892 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3895 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3897 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3898 m68010up, not just m68020up | cpu32.
3900 * Makefile.in (SONAME): New variable.
3901 ($(SHLINK)): Make a link to the transformed name, as well.
3902 (stamp-tshlink): New target.
3903 (install): Skip stamp-tshlink during install.
3905 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3907 * configure.in: Call AC_ARG_PROGRAM.
3908 * configure: Rebuild.
3909 * Makefile.in (program_transform_name): New variable.
3910 (install): Transform library name before installing it.
3912 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3914 * i960-dis.c (mem): Add HX dcinva instruction.
3916 Support for building as a shared library, based on patches from
3917 Alan Modra <alan@spri.levels.unisa.edu.au>:
3918 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3919 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3920 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3921 * configure: Rebuild.
3922 * Makefile.in (ALLLIBS): New variable.
3923 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3924 (COMMON_SHLIB, SHLINK): New variables.
3925 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3926 (STAGESTUFF): Remove variable.
3927 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3928 (stamp-piclist, piclist): New targets.
3929 ($(SHLIB), $(SHLINK)): New targets.
3930 ($(OFILES)): Depend upon stamp-picdir.
3931 (disassemble.o): Build twice if PICFLAG is set.
3932 (MOSTLYCLEAN): Add pic/*.o.
3933 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3934 (distclean): Remove pic and stamp-picdir.
3935 (install): Install shared libraries.
3936 (stamp-picdir): New target.
3938 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3940 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3941 Print unknown instruction as "unknown", rather than in hex.
3943 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3945 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3947 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3949 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3951 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3953 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3954 when necessary. From Ulrich Drepper
3955 <drepper@myware.rz.uni-karlsruhe.de>.
3957 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3959 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3960 sparc_num_opcodes. Update architecture enum values.
3961 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3962 (sparc_opcode_lookup_arch): New function.
3963 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3964 (sparc_opcodes): Add v9a shutdown insn.
3966 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3968 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3969 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3971 (print_insn_sparc64): Deleted.
3972 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3975 * sparc-opc.c (architecture_pname): Add v9a.
3977 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3979 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3980 incorrectly defined as 0x16 when it should be 0x15.
3981 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3982 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3983 excb (exception barrier) which is defined in the Alpha
3984 Architecture Handbook version 2.
3985 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3986 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3987 disassembled as or, for example.
3989 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3991 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3992 (_print_insn_mips): Change i from int to unsigned int.
3994 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3996 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3997 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3999 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4001 * i386-dis.c: Added Pentium Pro instructions.
4003 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4005 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4008 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4010 * sh-opc.h (sh_nibble_type): Added REG_B.
4011 (sh_arg_type): Added A_REG_B.
4012 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4014 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4016 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4018 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4020 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4022 * Makefile.in (distclean): Remove stamp-h. From Ronald
4023 F. Guilmette <rfg@monkeys.com>.
4025 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4027 From David Mosberger-Tang <davidm@azstarnet.com>:
4028 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4031 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4033 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4034 (sh_table): Added many SH3 opcodes.
4035 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4037 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4039 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4040 (subco,subco.): Mark this PPC, not PPCCOM.
4042 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4044 * configure: Rebuild with autoconf 2.7.
4046 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4048 * configure: Rebuild with autoconf 2.6.
4050 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4052 * configure.in: Sort list of architectures. Accept but do nothing
4053 for alliant, convex, pyramid, romp, and tahoe.
4055 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4057 * a29k-dis.c (print_special): Change num to unsigned int.
4059 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4061 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4064 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4066 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4067 * configure: Rebuilt.
4069 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4071 * configure.in: Add case for bfd_i860_arch.
4072 * configure: Rebuild.
4074 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4076 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4077 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4078 (NEXTDOUBLE): Likewise.
4079 (print_insn_m68k): Don't match fmoveml if there is more than one
4080 register in the list.
4081 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4083 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4085 * m68k-opc.c: Use #W rather than #w.
4086 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4088 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4090 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4091 and likewise for all the dbxx opcodes.
4093 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4095 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4097 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4099 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4100 the VR4100 specific instructions to the mips_opcodes structure.
4102 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4104 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4105 ugly Metrowerks bug in CW6, is fixed in CW7.
4107 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4109 * ppc-opc.c (whole file): Add flags for common/any support.
4111 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4113 * Makefile.in (BISON): Remove macro.
4114 (FLAGS_TO_PASS): Remove BISON.
4116 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4118 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4120 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4121 instructions that take no args by looking at the match mask.
4122 (print_insn_arg): Always print "%" before register names.
4123 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4124 [case '_']: Don't print "@#" before address.
4125 [case 'J']: Use "%s" as format string, not register name.
4126 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4128 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4130 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4133 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4135 From David Mosberger-Tang <davidm@azstarnet.com>
4137 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4138 (alpha_insn_set): added definitions for VAX floating point
4139 instructions (Unix compilers don't generate these, but handcoded
4140 assembly might still use them).
4142 * alpha-dis.c (print_insn_alpha): added support for disassembling
4143 the miscellaneous instructions in the Alpha instruction set.
4145 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4147 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4148 no longer create sysdep.h, sed ppc-opc.c to work around a
4149 serious Metrowerks C bug.
4150 * mpw-make.in: Remove.
4151 * mpw-make.sed: New file, used by mpw-configure to edit
4152 Makefile.in into an MPW makefile.
4154 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4156 * Makefile.in (maintainer-clean): New synonym for realclean.
4158 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4160 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4161 which use '0', '1', and '2' instead. Specify the proper size for
4162 a pmove immediate operand. Correct the pmovefd patterns to be
4163 moves to a register, not from a register.
4164 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4166 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4168 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4169 %psr, %wim, %tbr as F_NOTV9.
4171 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4173 * Makefile.in (Makefile): Just rebuild Makefile when running
4175 (config.h, stamp-h): New targets.
4176 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4177 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4178 rebuilding config.h.
4179 * configure: Rebuild.
4181 * mips-opc.c: Change unaligned loads and stores with "t,A"
4182 operands to use "t,A(b)".
4184 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4186 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4188 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4190 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4191 until 3 instead of until 2.
4193 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4195 * Makefile.in (ALL_CFLAGS): Define.
4196 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4197 (MOSTLYCLEAN): Add config.log.
4198 (distclean): Don't remove config.log.
4199 * configure.in: Substitute HDEFINES.
4200 * configure: Rebuild.
4202 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4204 * sh-opc.h (sh_arg_type): Add F_FR0.
4205 (sh_table, case fmac): Add F_FR0 as first argument.
4207 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4209 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4211 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4213 * sparc-dis.c: Remove all references to NO_V9.
4215 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4217 * aclocal.m4: Just include ../bfd/aclocal.m4.
4218 * configure: Rebuild.
4220 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4222 * sparc-dis.c (X_DISP19): Define.
4223 (print_insn, case 'G'): Use it.
4224 (print_insn, case 'L'): Sign extend displacement.
4226 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4228 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4229 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4230 host_makefile_frag or frags.
4231 * aclocal.m4: New file.
4232 * configure: Rebuild.
4233 * Makefile.in (INSTALL): Set to @INSTALL@.
4234 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4235 (INSTALL_DATA): Set to @INSTALL_DATA@.
4237 (AR_FLAGS): Set to rc rather than qc.
4238 (CC): Define as @CC@.
4239 (CFLAGS): Set to @CFLAGS@.
4240 (@host_makefile_frag@): Remove.
4241 (config.status): Remove dependency upon @frags@.
4243 * configure.in: ../bfd/config.bfd now just sets shell variables.
4244 Use them rather than looking through target Makefile fragments.
4245 * configure: Rebuild.
4247 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4249 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4251 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4253 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4254 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4257 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4258 (lookup_{name,value}): New functions.
4259 (prefetch_table): New static local.
4260 (sparc_{encode,decode}_prefetch): New functions.
4261 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4263 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4265 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4268 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4270 * sh-dis.c: Correct comment on first line of file.
4272 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4274 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4276 * sparc-opc.c (asi, membar): New static locals.
4277 (sparc_{encode,decode}_{asi,membar}): New functions.
4278 (sparc_opcodes, membar insn): Fix.
4279 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4280 Support decoding of membar masks.
4283 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4285 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4287 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4289 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4290 and likewise for the other branches. Add bhs as an alias for bcc,
4291 and likewise for the size variants. Add dbhs as an alias for
4294 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4296 * sh-opc.h (FP sts instructions): Update to match reality.
4298 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4300 * m68k-dis.c: (fpcr_names): Add % before all register names.
4301 (reg_names): Likewise.
4302 (print_insn_arg): Don't explicitly print % before register names.
4303 Add % before register names in static array names. In case 'r',
4304 print data registers as `@(Dn)', not `Dn@'. When printing a
4305 memory address, don't print @# before it.
4306 (print_indexed): Change base_disp and outer_disp from int to
4307 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4308 syntax. Sign extend 8 byte displacement correctly.
4309 (print_base): Print using MIT syntax. Print zpc when appropriate.
4310 Change parameter disp from int to bfd_vma.
4312 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4315 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4317 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4318 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4319 * sh-opc.h (sh_arg_type): Add new operand types.
4320 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4322 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4324 * Makefile.in (distclean): Remove generated file config.h.
4326 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4328 * Makefile.in (distclean): Remove generated file config.h.
4330 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4332 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4334 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4336 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4337 rather than numopcodes. Use m68k_opcodes rather than removed
4338 opcode function. Don't check F_ALIAS.
4339 (print_insn_arg): Change first parameter to be const char *.
4340 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4341 (m68k-opc.o): New target.
4342 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4343 * configure: Rebuild.
4345 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4347 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4348 (opcode_bits, opcode_hash_table): New variables.
4349 (opcodes_initialized): Renamed from opcodes_sorted.
4350 (build_hash_table): New function.
4351 (is_delayed_branch): Use hash table.
4352 (print_insn): Renamed from print_insn_sparc, made static.
4353 Build and use hash table. If !sparc64, ignore sparc64 insns,
4354 and vice-versa if sparc64.
4355 (print_insn_sparc, print_insn_sparc64): New functions.
4356 (compare_opcodes): Move sparc64 opcodes to end.
4357 Print commutative insns with constant second.
4358 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4360 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4362 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4363 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4364 avoids printing a delay slot in a delay slot.
4365 * sh-opc.h (sh_table): Fully bracket last entry.
4367 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4369 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4371 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4373 * configure.in: Get host_makefile_frag from ${srcdir}.
4375 * configure.in: Autoconfiscated. Check for string[s].h. Create
4376 config.h from config.in. Don't set up sysdep.h link.
4377 * sysdep.h: New file.
4378 * configure, config.in: New files, generated from configure.in.
4379 * Makefile.in: Updated to be processed autoconf-style.
4380 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4381 (Makefile): Depend on config.status.
4382 (config.status): New rule.
4383 * configure.bat: Update Makefile substitutions.
4385 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4387 * mips-opc.c (L1): Define.
4388 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4389 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4392 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4394 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4395 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4396 have multiple add units but only a single logical unit.
4398 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4399 shifted by 18, without any insertion or extraction function.
4400 (insert_cr, extract_cr): Remove.
4402 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4404 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4407 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4409 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4410 * sh-opc.h: Add copyright.
4412 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4414 * Makefile.in (crunch-m68k): Delete extra target accidentally
4415 checked in a while ago.
4417 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4419 * sh-opc.h (sh_table): Add SH3 support.
4421 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4423 * sh-opc.h: Added bsrf and braf.
4425 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4427 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4428 bogus [ls]fm{ea,fd} patterns.
4430 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4431 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4432 initialize it from memory. Make function static.
4433 (print_insn_{big,little}_arm): New functions.
4434 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4435 the correct endianness.
4437 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4439 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4442 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4444 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4445 17th, so that it builds again using GCC as the compiler.
4447 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4449 * mips-dis.c (print_insn_little_mips): Cast return value from
4450 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4451 expects an unsigned long, and that might be fewer words of
4452 argument storage (e.g., if bfd_vma is long long on a 32-bit
4454 (print_insn_big_mips): Likewise with bfd_getb32 value.
4455 (_print_insn_mips): Now static.
4457 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4459 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4460 gcc memory hog problem with initializer is fixed.
4462 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4464 Merge in support for Mac MPW as a host.
4465 (Old change descriptions retained for informational value.)
4467 * mpw-config.in (archname): Compute from the config.
4468 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4470 * mpw-config.in (target_arch): Compute from canonical target.
4471 (m68k, mips, powerpc, sparc): Add architectures.
4472 * mpw-make.in (disassemble.c.o): Add.
4473 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4475 * mpw-config.in (BFD_MACHINES): Set to a default value.
4476 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4478 * mpw-make.in (CSEARCH): Add extra-include to search path.
4480 * mpw-config.in (varargs.h): Don't create.
4481 (sysdep.h): Create using forward-include.
4482 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4484 * mpw-config.in: New file, MPW version of configure.in.
4485 * mpw-make.in: New file, MPW version of Makefile.in.
4487 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4489 * alpha-dis.c (print_insn_alpha): Put empty statement after
4492 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4494 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4495 (low_sign_extend): Likewise.
4496 (get_field): Delete unused function.
4497 (set_field, deposit_14, deposit_21): Likewise.
4499 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4501 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4504 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4506 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4508 * alpha-opc.h (OSF_ASMCODE): define
4509 print pal-code names as defined in App C of the
4510 Alpha Architecture Reference Manual
4512 * alpha-dis.c: cleaned up output
4513 print stylized code forms as defined in App A.4.3 of the
4514 Alpha Architecture Reference Manual
4516 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4518 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4520 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4523 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4525 * m68k-dis.c (opcode): New function. Returns address of opcode
4526 table entry given index, even if the opcode table was split to
4527 work around gcc bugs.
4528 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4530 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4531 (reg_names): Now const.
4532 (print_insn_arg): Arrays cacheFieldName and names now const.
4533 (print_indexed): Array scales now const.
4535 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4537 * ppc-opc.c: Sort recently added instructions by minor opcode
4538 number within major opcode number.
4540 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4542 * hppa-dis.c: Include libhppa.h.
4544 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4546 * mips-opc.c: Change dli to use M_DLI, and add dla.
4548 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4550 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4552 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4554 * mips-opc.c: Add r4650 mul instruction.
4556 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4558 * mips-opc.c: Add uld and usd macros for unaligned double load and
4561 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4563 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4564 mfdcr, mtdcr, icbt, iccci.
4566 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4568 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4569 signed char fields to shorts, more portable.
4571 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4573 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4574 char fields as signed chars, since they may have negative values.
4576 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4578 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4579 (mycroft@netbsd.org).
4581 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4583 From "Logg, Ed" <elogg@ea.com>:
4584 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4585 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4588 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4590 * ppc-opc.c: Changes based on patch from David Edelsohn
4591 <edelsohn@mhpcc.edu>.
4592 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4595 (insert_tbr): New static function.
4596 (extract_tbr): New static function.
4597 (XFXFXM_MASK, XFXM): Define.
4598 (XSPRBAT_MASK, XSPRG_MASK): Define.
4599 (powerpc_opcodes): Add instructions to access special registers by
4600 name. Add mtcr and mftbu.
4602 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4604 * mips-opc.c (P3): Define.
4605 (mips_opcodes): Add mad and madu.
4607 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4609 * configure.in: Add W65 support.
4610 * disassemble.c: Likewise.
4611 * w65-opc.h, w65-dis.c: New files.
4613 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4615 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4618 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4620 * mips-opc.c: Add dli as a synonym for li.
4622 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4624 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4625 print something for reserved opcode values, even if it won't
4628 * mips-dis.c (_print_insn_mips): When initializing, shift right
4629 and mask, to avoid sign extension problems on the Alpha.
4631 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4634 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4636 * sh-opc.h (mov.l gbr): Get direction right.
4637 * sh-dis.c (print_insn_shx): New function.
4638 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4639 print opcodes with right byte order.
4641 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4643 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4644 to avoid conflicts with getopt.
4646 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4648 * hppa-dis.c (print_insn_hppa): Read the instruction using
4649 bfd_getb32, so that it works on a little endian or 64 bit host.
4650 Remove unused local variable op.
4652 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4654 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4655 addu does not work correctly if -mips3.
4657 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4659 * a29k-dis.c (print_special): Add special register names defined
4660 on 29030, 29040 and 29050.
4661 (print_insn): Handle new operand type 'I'.
4663 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4665 * Makefile.in (INSTALL): Use top level install.sh script.
4667 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4669 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4670 that it works on a little endian host.
4672 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4674 * configure.in: Use ${config_shell} when running config.bfd.
4676 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4678 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4680 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4682 * a29k-dis.c (print_insn): Print the opcode.
4684 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4686 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4688 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4690 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4692 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4694 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4695 which store a value into memory.
4697 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4699 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4700 * arm-dis.c, arm-opc.h: New files.
4702 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4704 * Makefile.in (ns32k-dis.o): Add dependency.
4705 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4706 string, not as array of chars.
4708 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4710 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4712 * sparc-opc.c: Added sparclite extended FP operations, and
4713 versions of v9 impdep* instructions permitting specification of
4716 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4718 * i960-dis.c (reg_names): Now const.
4719 (struct sparse_tabent): New type, copied from array type in mem
4721 (ctrl): Local static array ctrl_tab now const.
4722 (cobr): Local static array cobr_tab now const.
4723 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4724 static variable mem_tab no longer explicitly initialized. Changed
4725 mem_init to const array of struct sparse_tabent.
4726 (reg): Local static variable reg_tab no longer explicitly
4727 initialized. Changed reg_init to const array of struct
4729 (ea): Local static array scale_tab now const.
4731 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4734 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4736 * configure.bat: the disassember needs to be enabled for
4737 "objdump -d" to work in djgpp.
4739 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4741 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4742 (invalid_float): Enabled general version, doesn't require running
4743 on ns32k host. Changed to take char* argument, and test for
4744 explicitly specified sizes, instead of using sizeof() on host CPU
4746 (INVALID_FLOAT): Cast first argument.
4747 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4748 list_P032, list_M032): Now const.
4749 (optlist, list_search): Made appropriate arguments now point to
4751 (print_insn_arg): Changed static array of one-character-string
4752 pointers into a static const array of characters; fixed sprintf
4753 statement accordingly.
4755 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4757 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4758 from distribution. A ns32k-dis.c from a previous distribution has
4759 been brought up to date and supports the new interface.
4761 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4763 * configure.in: add bfd_ns32k_arch target support.
4765 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4766 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4768 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4770 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4773 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4775 * h8300-dis.c, mips-dis.c: Don't use true and false.
4777 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4779 * configure.in: Change --with-targets to --enable-targets.
4781 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4783 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4784 opcodes to the first instruction with that opcode, to speed
4785 disassembly of large files. From ralphc@pyramid.com (Ralph
4788 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4790 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4792 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4794 * configure.bat: update to latest makefile.in
4796 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4798 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4799 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4800 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4801 slot insn is in a delay slot.
4802 * z8k-opc.h: (resflg): Fix patterns.
4803 * h8500-opc.h Fix CR insn patterns.
4805 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4807 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4808 "cmpl" before POWER versions, so that gas -many uses them.
4810 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4812 * disassemble.c: New file.
4813 * Makefile.in (OFILES): Add disassemble.o.
4814 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4815 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4816 binutils/configure.in.
4818 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4819 opcode being examined.
4821 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4823 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4824 (insert_ral, insert_ram, insert_ras): New functions.
4825 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4826 RAS for store with update.
4828 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4831 (edelsohn@npac.syr.edu).
4833 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4835 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4838 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4840 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4842 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4844 * ppc-opc.c (powerpc_operands): The signedp field has been
4845 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4846 instead. Add new operand SISIGNOPT.
4847 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4848 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4849 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4852 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4854 * i386-dis.c (struct private): Renamed to dis_private. `private'
4855 is a reserved word for dynix cc.
4857 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4859 * configure.in: Change error message to refer to bfd/config.bfd
4860 rather than bfd/configure.in.
4862 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4864 * ppc-opc.c: Define POWER2 as short alias flag.
4865 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4868 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4870 * i960-dis.c (print_insn_i960): Don't read a second word for
4871 opcodes 0, 1, 2 and 3.
4873 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4875 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4877 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4879 * m68881-ext.c: Removed; no longer used.
4880 * Makefile.in: Changed accordingly.
4882 * m68k-dis.c (ext_format_68881): Don't declare.
4883 (print_insn_m68k): If an instruction uses place 'i', it uses at
4884 least four fixed bytes.
4885 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4886 extended float, convert to double using floatformat_to_double, not
4887 ieee_extended_to_double, and fetch the data before converting it.
4889 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4891 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4892 davidj@ICSI.Berkeley.EDU (David Johnson).
4894 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4896 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4897 PowerPC uses bdnz[l][a].
4899 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4901 * dis-buf.c, i386-dis.c: Include sysdep.h.
4903 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4905 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4907 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4908 by Motorola PowerPC 601 with PPC_OPCODE_601.
4909 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4910 Disassemble Motorola PowerPC 601 instructions as well as normal
4911 PowerPC instructions.
4913 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4915 * i960-dis.c (reg, mem): Just use a static array instead of
4918 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4920 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4921 condition name index if this is for a negated condition.
4923 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4924 Floating point format for 'H' operand is backwards from normal
4925 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4926 operands (fmpyadd and fmpysub), handle bizarre register
4927 translation correctly for single precision format.
4929 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4930 or 'I' operands if the next format specifier is 'M' (fcmp
4931 condition completer).
4933 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4935 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4936 single number giving a bitmask for the MB and ME fields of an M
4937 form instruction. Change NB to accept 32, and turn it into 0;
4938 also turn 0 into 32 when disassembling. Seperated SH from NB.
4939 (insert_mbe, extract_mbe): New functions.
4940 (insert_nb, extract_nb): New functions.
4941 (SC_MASK): Mask out SA and LK bits.
4942 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4943 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4944 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4945 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4946 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4947 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4948 (powerpc_macros): Define table of macro definitions.
4949 (powerpc_num_macros): Define.
4951 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4952 if PPC_OPERAND_NEXT is set.
4954 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4956 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4957 char. Retrieve contents using bfd_getl32 instead of shifting.
4959 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4961 * ppc-opc.c: New file. Opcode table for PowerPC, including
4962 opcodes for POWER (RS/6000).
4963 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4964 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4965 (CFILES): Add ppc-dis.c.
4966 (ppc-dis.o, ppc-opc.o): New targets.
4967 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4969 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4971 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4972 No space before 'u', 'f', or 'N'.
4974 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4976 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4977 farther than we should.
4979 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4981 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4983 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4985 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4987 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4988 needs it, to prevent reading past the end of a section.
4990 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4992 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4993 Removed t,A case for la; always use t,A(b) case.
4995 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4997 From Ted Lemen <mellon@pepper.ncd.com>
4998 * mips-dis.c (print_insn_arg): Handle 'k'.
4999 * mips-opc.c: Make cache use k, not t.
5001 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5003 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5004 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5005 FLOAT_FORMAT_CODE to put out floating point register names.
5007 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5009 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5011 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5013 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5015 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5017 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5018 larger than 32. Moved dsxx32 variants first for disassembler.
5020 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5022 * z8kgen.c, z8k-opc.h: Add full lda information.
5024 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5026 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5027 movb instructions. Any necessary space will be emitted by
5028 the code to handle nullification completers.
5030 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5032 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5034 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5036 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5037 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5039 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5041 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5043 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5045 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5046 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5048 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5050 * m88k-dis.c (m88kdis): comment change. Remove space after
5052 (printop): handle new arg types DEC and XREG for m88110.
5054 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5056 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5057 type for absolute branch addresses. Delete special
5058 "ble" and "be" code in 'W' operand code.
5060 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5062 * mips-opc.c: Set hazard information correctly for branch
5063 likely instructions.
5065 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5067 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5068 info->fprintf_func for printing and info->print_address_func for
5071 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5073 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5075 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5077 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5078 Corrected second case of "b" for disassembler.
5080 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5082 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5083 to BFD swapping routines to correspond to BFD name changes.
5085 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5087 * mips-opc.c: Change div machine instruction to be z,s,t rather
5088 than s,t. Change div macro to be d,v,t rather than d,s,t.
5089 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5090 rem and remu which generates only the corresponding div
5091 instruction. This is for compatibility with the MIPS assembler,
5092 which only generates the simple machine instruction when an
5093 explicit destination of $0 is used.
5094 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5096 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5098 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5099 WR_31 hazard for bal, bgezal, bltzal.
5101 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5103 * hppa-dis.c (print_insn_hppa): Use print function
5104 from within the disassemble_info, not fprintf_filtered.
5106 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5108 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5109 Law, law@cs.utah.edu.)
5111 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5113 * mips-opc.c ("absu"): Removed.
5116 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5118 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5119 Changed hazard information to distinguish between memory load
5120 delays and coprocessor load delays.
5122 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5124 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5126 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5128 * configure.in: Don't pass cpu to config.bfd.
5130 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5132 * m88k-dis.c (m88kdis): Make class unsigned.
5134 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5136 * alpha-dis.c (print_insn_alpha): One branch format case was
5137 missing the instruction name.
5139 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5141 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5142 Add the arch-specific auxiliary files.
5143 (OFILES): Remove the arch-specific auxiliary files
5144 and use BFD_MACHINES instead of DIS_LIBS.
5145 * configure.in: Set BFD_MACHINES based on --with-targets option.
5147 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5149 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5152 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5154 * sparc-opc.c: Change CONST to const to deal with gcc
5155 -Dconst=__const -traditional.
5157 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5159 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5160 coprocessor instructions out of #if 0, and made them use new
5163 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5165 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5167 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5169 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5170 instruction, for use by the disassembler.
5172 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5173 hand-coded sign extensions that depended on 32-bit host ints.
5174 FIXME, we still depend on big-endian host bitfield ordering.
5175 (sparc_print_insn): Set the insn_info_valid field, and the
5176 other fields that describe the instruction being printed.
5178 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5180 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5181 `jmp' instead of just one of them.
5183 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5185 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5186 (fput_fp_reg_r): Renamed from fput_reg_r.
5187 (fput_fp_reg): New function.
5188 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5190 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5192 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5194 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5196 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5198 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5199 don't output a space.
5201 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5203 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5205 * mips-opc.c: New file, containing opcode table from
5206 ../include/opcode/mips.h.
5207 * Makefile.in: Add it.
5209 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5211 * m88k-dis.c: New file, moved in from gdb and changed to use the
5212 new dis-asm.h disassembler interface.
5213 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5214 (m88k-dis.o): New target.
5216 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5218 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5219 argument string const char * to correspond to opcode/mips.h.
5221 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5223 * mips-dis.c: Updated to account for name changes in new version
5225 * Makefile.in: Added header file dependencies.
5227 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5229 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5231 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5233 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5234 extend, rather than shifts.
5236 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5238 * Makefile.in: Undo 15 June change.
5240 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5242 * m68k-dis.c (print_insn_arg): Change return value to byte count
5244 * m68k-dis.c: Re-write to detect invalid operands before
5245 printing anything, so we can handle this the same way we
5246 handle invalid opcodes.
5248 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5250 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5252 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5254 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5257 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5259 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5261 * configure.in: Do make sysdep.h link.
5262 * Makefile.in: Search ../include. Don't search ../bfd.
5264 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5266 Changes from Jeff Law, law@cs.utah.edu:
5267 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5268 Do not print a space before the completers specified by
5271 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5273 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5274 defined, since gdb has been fixed.
5276 Changes from Jeff Law, law@cs.utah.edu:
5277 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5278 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5279 be a *disassemble_info, not a *FILE.
5280 * hppa-dis.c: Support 'd', '!', and 'a'.
5281 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5282 * hppa-dis.c: Delete cases which are no longer needed.
5284 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5286 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5288 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5290 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5293 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5295 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5296 * configure.in: No longer need to configure to get sysdep.h.
5298 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5300 * Patches from Jeffrey Law <law@cs.utah.edu>.
5301 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5302 templates for 1.1 FP computational instructions.
5304 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5306 * h8500-dis.c (print_insn_h8500): Address argument is type
5308 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5311 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5312 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5314 * sparc-dis.c (compare_opcodes): Move static declaration to
5317 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5319 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5320 instruction, remove unimp hack from 'l' argument.
5322 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5324 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5327 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5329 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5330 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5333 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5335 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5336 arrays of string pointers to 2-d arrays of chars, to save
5339 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5341 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5342 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5344 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5346 * hppa-dis.c: New file from Utah, adapted to new disassembler
5348 * Makefile.in: Include it.
5350 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5352 * sh-dis.c, sh-opc.h: New files.
5354 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5356 * alpha-dis.c, alpha-opc.h: New files.
5358 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5360 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5363 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5365 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5367 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5369 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5372 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5374 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5375 and double percent signs a few places.
5377 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5379 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5380 Use info->print_address_func not print_address.
5382 * dis-buf.c (generic_print_address): New function.
5384 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5386 * Makefile.in: Add sparc-dis.c.
5387 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5389 Add `add' instruction to the set that get checked
5390 for a preceding `sethi' in order to print an absolute address.
5391 * (print_insn): Disassembly prefers real instructions.
5392 (is_delayed_branch): Speed up.
5393 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5394 Still missing some float ops, and needs testing.
5395 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5396 F_ALIAS. Use printf, not fprintf, when not passing a file
5398 (compare_opcodes): Check that identical instructions have
5399 identical opcodes, complain otherwise.
5402 * Include reg_names.
5404 Use dis-asm.h/read_memory_func interface.
5406 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5408 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5409 deliberately return non-zero to setjmp from longjmp. Otherwise
5410 this code fails to compile.
5412 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5414 * m68k-dis.c: Fix prototype for fetch_arg().
5416 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5418 * dis-buf.c: New file, for new read_memory_func interface.
5419 Makefile.in (OFILES): Include it.
5420 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5421 Use new read_memory_func interface.
5423 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5425 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5426 * h8500-opc.h: Fix couple of opcodes.
5428 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5430 * Makefile.in: add dvi & installcheck targets
5432 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5434 * Makefile.in: Update for h8500-dis.c.
5436 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5438 * h8500-dis.c, h8500-opc.h: New files
5440 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5442 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5443 ../include/dis-asm.h.
5444 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5445 and ../gdb/m68k-pinsn.c).
5446 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5447 and ../gdb/i386-pinsn.c).
5448 * m68881-ext.c: New file. Moved definition of
5449 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5450 * Makefile.in: Adjust for new files.
5451 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5452 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5453 can be dis-assembled.
5455 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5457 * mips-dis.c (print_insn_arg): Now returns void.
5459 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5461 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5462 files that use the macros.
5464 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5466 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5467 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5468 (CFILES): Added mips-dis.c.
5470 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5472 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5473 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5475 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5477 * Makefile.in: Improve *clean rules.
5478 * configure.in: Allow a default host.
5480 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5482 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5483 files include other sysdep files
5485 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5487 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5489 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5491 * configure.in: For host support, use ../bfd/configure.host
5492 so it stays in sync with the ../bfd/hosts database.
5494 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5496 * configure.in: use cpu-vendor-os triple instead of nested cases
5498 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5500 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5501 *always* the wrong one.
5503 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5505 * z8kgen.c: added copyright info
5507 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5509 * z8k-dis.c (unparse_instr): prettier tabs
5510 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5512 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5514 * configure.in: Add ncr* configuration.
5515 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5516 picayune ANSI compilers happy.
5518 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5520 * configure.in (i386): Make i386 and i486 synonymous for now.
5521 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5523 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5525 * Makefile.in (install): Fix typo.
5527 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5529 * Makefile.in (make): Remove obsolete crud.
5530 (sparc-opc.o): Avoid Sun Make VPATH bug.
5532 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5534 * Makefile.in: since there are no SUBDIRS, remove rule and
5535 references of subdir_do.
5537 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5539 * Makefile.in (install): Get the library name right here too.
5540 Don't install bfd.h, since it's unrelated to this library. No
5541 subdirs to recurse into, either.
5542 (CFILES): The source file has a .c suffix, not .o.
5544 * sparc-opc.c: New file, moved from BFD.
5545 * Makefile.in (OFILES): Build it.
5547 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5549 * z8k-dis.c: fixed forward refferences of some declarations.
5551 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5553 * Makefile.in: get the name of the library right
5555 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5557 * z8k-dis.c: knows how to disassemble z8k stuff
5558 * z8k-opc.h: new file full of z8000 opcodes
5562 version-control: never