1 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-dis.c (VEX_W_382X_P_2_M_0): New.
4 (vex_w_table): Add VEX_W_382X_P_2_M_0.
5 (mod_table): Use VEX_W_382X_P_2_M_0.
7 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
9 * i386-dis.c (vex_w_table): Reformat.
11 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
13 * i386-dis.c (USE_VEX_W_TABLE): New.
14 (VEX_W_TABLE): Likewise.
15 (VEX_W_XXX): Likewise.
16 (vex_w_table): Likewise.
17 (prefix_table): Use VEX_W_XXX.
18 (vex_table): Likewise.
19 (vex_len_table): Likewise.
20 (mod_table): Likewise.
21 (get_valid_dis386): Handle USE_VEX_W_TABLE.
23 * i386-opc.tbl: Add VexW0 to AVX instructions where the VEX.W bit
25 * i386-tbl.h: Regenerated.
27 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
29 * i386-opc.h (VEX128): New.
32 2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
34 * i386-dis.c (vex_len_table): Reformat.
36 2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
38 * i386-dis.c (MOD_VEX_51): Renamed to ...
41 (mod_table): Likewise.
43 2009-12-14 Nick Clifton <nickc@redhat.com>
46 * arm-dis.c (arm_opcodes): Specify %R in cases where using r15
47 results in unpredictable behaviour.
48 (print_insn_arm): Handle %R.
50 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
52 * i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
54 (print_insn): Don't set vex.w here.
56 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
58 * i386-dis.c (print_insn): Set vex.w to 0.
60 2009-12-11 Quentin Neill <quentin.neill@amd.com>
62 * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
63 to avoid fetching ahead for the immediate bytes when OP_E_memory
64 has already been called. Fix indentation.
66 2009-12-11 Nick Clifton <nickc@redhat.com>
68 * Makefile.in: Regenerate.
69 * configure: Regenerate.
70 * arm-dis.c: Fix shadowed variable warnings.
71 * cgen-opc.c: Likewise.
72 * cr16-dis.c: Likewise.
73 * crx-dis.c: Likewise.
74 * d30v-dis.c: Likewise.
75 * fr30-dis.c: Likewise.
76 * frv-opc.c: Likewise.
77 * h8500-dis.c: Likewise.
78 * i386-dis.c: Likewise.
79 * i960-dis.c: Likewise.
80 * ia64-gen.c: Likewise.
81 * ia64-opc.c: Likewise.
82 * m32c-asm.c: Likewise.
83 * m32c-dis.c: Likewise.
84 * m68k-dis.c: Likewise.
85 * maxq-dis.c: Likewise.
86 * mcore-dis.c: Likewise.
87 * mep-asm.c: Likewise.
88 * microblaze-dis.c: Likewise.
89 * mmix-dis.c: Likewise.
90 * ns32k-dis.c: Likewise.
91 * or32-opc.c: Likewise.
92 * s390-dis.c: Likewise.
93 * sh64-dis.c: Likewise.
94 * spu-dis.c: Likewise.
95 * tic30-dis.c: Likewise.
97 2009-12-09 Nick Clifton <nickc@redhat.com>
100 * arm-dis.c (print_insn_arm): Mark insns that use the PC in
101 post-indexed addressing as unpredictable.
103 2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
105 * i386-dis.c (FXSAVE_Fixup): New.
107 (mod_table): Use FXSAVE on fxsave and fxrstor.
109 * i386-opc.tbl: Add fxsave64 and fxrstor64.
110 * i386-tbl.h: Regenerated.
112 2009-12-02 Nick Clifton <nickc@redhat.com>
113 Richard Earnshaw <rearnsha@arm.com>
116 * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
119 2009-11-30 Massimo Ruo Roch <massimo.ruoroch@polito.it>
122 * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
125 2009-11-17 Quentin Neill <quentin.neill@amd.com>
126 Sebastian Pop <sebastian.pop@amd.com>
128 * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
129 decoding the second source operand from the immediate byte.
130 (OP_EX_VexW): Pass an extra integer to identify the second
131 and third source arguments.
133 2009-11-19 H.J. Lu <hongjiu.lu@intel.com>
135 * i386-opc.tbl: Add IsLockable to cmpxch16b.
136 * i386-tbl.h: Regenerated.
138 2009-11-19 Nick Clifton <nickc@redhat.com>
141 * arm-dis.c (print_insn_arm): Do not print an offset of zero when
142 decoding Immediaate Offset addressing.
144 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
147 * i386-dis.c (get_vex_imm8): Do not increment codep.
148 Avoid incrementing bytes_before_imm when OP_E_memory
149 has already forwarded the codep pointer.
150 (OP_EX_VexW): Increment codep to skip mod/rm byte.
152 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
154 * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
155 (VEX_LEN_XOP_08_A1): Removed.
156 (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
158 (vex_len_table): Same.
159 * i386-gen.c (CPU_CVT16_FLAGS): Removed.
160 (cpu_flags): Remove field for CpuCVT16.
161 * i386-opc.h (CpuCVT16): Removed.
162 (i386_cpu_flags): Remove bitfield cpucvt16.
163 (i386-opc.tbl): Remove CVT16 instructions.
164 * i386-init.h: Regenerated.
165 * i386-tbl.h: Regenerated.
167 2009-11-17 Sebastian Pop <sebastian.pop@amd.com>
168 Quentin Neill <quentin.neill@amd.com>
170 * i386-dis.c (OP_Vex_2src_1): New.
171 (OP_Vex_2src_2): New.
175 (VEX_LEN_XOP_08_A0): Added.
176 (VEX_LEN_XOP_08_A1): Added.
177 (VEX_LEN_XOP_09_80): Added.
178 (VEX_LEN_XOP_09_81): Added.
179 (xop_table): Added an entry for XOP_08. Handle xop instructions.
180 (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
181 VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
182 (get_valid_dis386): Handle XOP_08.
184 * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
185 (cpu_flags): Add CpuXOP and CpuCVT16.
186 (opcode_modifiers): Add XOP08, Vex2Sources.
187 * i386-opc.h (CpuXOP): Added.
189 (i386_cpu_flags): Add cpuxop and cpucvt16.
191 (Vex2Sources): Added.
192 (i386_opcode_modifier): Add xop08, vex2sources.
193 * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
194 * i386-init.h: Regenerated.
195 * i386-tbl.h: Regenerated.
197 2009-11-17 Nick Clifton <nickc@redhat.com>
200 * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
201 instruction variants. Add pattern for MRS variant that was being
203 (arm_decode_shift): Place error message in a comment.
204 (print_insn_arm): Note that writing back to the PC is
206 Only print 'p' variants of cmp/cmn/teq/tst instructions if
207 decoding for pre-V6 architectures.
209 2009-11-17 Edward Nevill <edward.nevill@arm.com>
211 * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
213 2009-11-14 Doug Evans <dje@sebabeach.org>
215 * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
217 * Makefile.in: Regenerate.
219 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
221 * i386-dis.c (OP_E_extended): Removed.
223 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
225 * i386-dis.c (print_insn): Check rex_ignored.
227 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
229 * i386-dis.c (ckprefix): Updated to return 0 if number of
230 prefixes > 14 and record the last position for each prefix.
231 (lock_prefix): Removed.
232 (data_prefix): Likewise.
233 (addr_prefix): Likewise.
234 (repz_prefix): Likewise.
235 (repnz_prefix): Likewise.
236 (last_lock_prefix): New.
237 (last_repz_prefix): Likewise.
238 (last_repnz_prefix): Likewise.
239 (last_data_prefix): Likewise.
240 (last_addr_prefix): Likewise.
241 (last_rex_prefix): Likewise.
242 (last_seg_prefix): Likewise.
243 (MAX_CODE_LENGTH): Likewise.
244 (ADDR16_PREFIX): Likewise.
245 (ADDR32_PREFIX): Likewise.
246 (DATA16_PREFIX): Likewise.
247 (DATA32_PREFIX): Likewise.
248 (REP_PREFIX): Likewise.
249 (seg_prefix): Likewise.
250 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
251 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
252 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
253 (get_valid_dis386): Updated.
255 (OP_Monitor): Likewise.
256 (REP_Fixup): Likewise.
257 (print_insn): Display all prefixes.
258 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
259 (intel_operand_size): Likewise.
260 (OP_E_register): Likewise.
263 (OP_IMREG): Likewise.
267 (CRC32_Fixup): Likewise.
268 (MOVBE_Fixup): Likewise.
269 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
271 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
272 used_prefixes only if it is used.
274 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
276 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
277 or, sbb, sub, xor and xchg with register only operands.
278 * i386-tbl.h: Regenerated.
280 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
282 * i386-gen.c (opcode_modifiers): Add IsLockable.
284 * i386-opc.h (IsLockable): New.
285 (i386_opcode_modifier): Add islockable.
287 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
288 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
290 * i386-tbl.h: Regenerated.
292 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
294 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
295 generic coprocessor instructions for FPA loads and stores.
296 (print_insn_coprocessor): Remove %C support. Display address for
297 PC-relative offsets in %A.
299 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
301 * i386-dis.c (all_prefixes): New.
302 (ckprefix): Set all_prefixes.
303 (print_insn): Print all_prefixes instead of lock_prefix,
304 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
306 2009-11-11 Nick Clifton <nickc@redhat.com>
309 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
310 (print_insn_arm): Extend %s format control code to check for
311 unpredictable addressing modes. Add support for %S format control
312 code which suppresses this check.
313 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
314 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
315 PRE_BIT_SET): New macros.
316 (print_insn_coprocessor): Use the new macros instead of magic
318 (print_arm_address): Likewise.
319 (pirnt_insn_arm): Likewise.
320 (print_insn_thumb32): Likewise.
322 2009-11-11 Nick Clifton <nickc@redhat.com>
324 * po/id.po: Updated Indonesian translation.
326 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
328 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
330 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
332 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
333 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
334 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
336 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
339 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
340 Quentin Neill <quentin.neill@amd.com>
342 * opcodes/i386-dis.c (OP_LWPCB_E): New.
345 (USE_XOP_8F_TABLE): New.
347 (REG_XOP_LWPCB): New.
351 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
352 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
354 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
355 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
356 to access to the vex_table.
360 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
361 (cpu_flags): Add CpuLWP.
362 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
363 * opcodes/i386-opc.h (CpuLWP): New.
364 (i386_cpu_flags): Add bit cpulwp.
368 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
369 * opcodes/i386-opc.tbl (llwpcb): Added.
373 2009-11-04 DJ Delorie <dj@redhat.com>
375 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
376 (mvtcp, mvfcp, opecp): Remove.
377 * rx-decode.c: Regenerate.
378 * rx-dis.c (cpen): Remove.
380 2009-11-03 Doug Evans <dje@sebabeach.org>
382 * m32c-desc.c: Regenerate.
383 * mep-desc.c: Regenerate.
385 2009-11-02 Paul Brook <paul@codesourcery.com>
387 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
388 Add VFPv4 instructions.
390 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
392 * i386-dis.c (OP_VEX_FMA): Removed.
394 (Vex128FMA): Removed.
395 (prefix_table): First source operand of FMA4 insns is decoded
396 with Vex not with VexFMA.
397 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
398 when vex.w is set. Third source operand is decoded with
400 2009-10-27 Alan Modra <amodra@bigpond.net.au>
402 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
403 * Makefile.in: Regenerate.
404 * po/POTFILES.in: Regenerate.
406 2009-10-23 Doug Evans <dje@sebabeach.org>
408 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
409 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
410 * cgen-bitset.c: Update.
411 * fr30-desc.h: Regenerate.
412 * frv-desc.h: Regenerate.
413 * ip2k-desc.h: Regenerate.
414 * iq2000-desc.h: Regenerate.
415 * lm32-desc.h: Regenerate.
416 * m32c-desc.h: Regenerate.
417 * m32c-opc.h: Regenerate.
418 * m32r-desc.h: Regenerate.
419 * mep-desc.h: Regenerate.
420 * mt-desc.h: Regenerate.
421 * openrisc-desc.h: Regenerate.
422 * xc16x-desc.h: Regenerate.
423 * xstormy16-desc.h: Regenerate.
425 2009-10-22 DJ Delorie <dj@redhat.com>
427 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
428 * rx-decode.c: Regenerated.
430 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
433 * i386-dis.c: Document LB, LS and LV macros.
434 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
435 with the 64-bit displacement or immediate operand.
436 (putop): Handle LB, LS and LV macros.
438 2009-10-18 Doug Evans <dje@sebabeach.org>
440 * lm32-opinst.c: Regenerate.
441 * m32c-desc.c: Regenerate.
442 * m32r-opinst.c: Regenerate.
443 * openrisc-ibld.c: Regenerate.
444 * xc16x-desc.c: Regenerate.
445 * xc16x-desc.h: Regenerate.
447 2009-10-17 Doug Evans <dje@sebabeach.org>
449 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
450 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
451 sorted alphabetically.
452 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
453 stamp-* rules are sorted alphabetically.
454 * Makefile.in: Regenerate.
456 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
458 * i386-opc.h: Use enum instead of nested macros.
460 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
462 * i386-dis.c: Simplify enums.
464 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
465 Ineiev <ineiev@gmail.com>
468 * i386-dis.c: Use enum instead of nested macros.
470 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
472 * i386-dis.c (MAX_BYTEMODE): Removed.
474 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
477 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
479 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
481 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
484 2009-10-07 Michael Eager <eager@eagercon.com>
486 * microblaze-dis.c: Add include for microblaze-dis.h,
487 eliminate local extern decls.
488 * microblaze-dis.h: New.
490 2009-10-06 Nick Clifton <nickc@redhat.com>
492 * po/fi.po: Updated Finnish translation.
494 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
496 * opc2c.c: Include "libiberty.h" and <errno.h>.
497 (orig_filename): Constify.
498 (dump_lines): Fix line number directive.
499 (main): Set orig_filename to basename of input file. Use
502 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
503 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
504 instead of $(EXEEXT).
505 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
506 $(LINK_FOR_BUILD). Link with libiberty.
507 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
508 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
509 * Makefile.in: Regenerated.
510 * rx-decode.c: Regenerated.
512 2009-10-03 Paul Reed <paulreed@paddedcell.com>
514 * arm-dis.c (print_insn): Check symtab_size not *symtab.
516 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
518 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
519 * i386-tbl.h: Regenerated.
521 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
523 * ppc-dis.c (ppc_opts): Add "476" entry.
524 * ppc-opc.c (PPC476): Define.
525 (powerpc_opcodes): Update mnemonics where required for 476.
527 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
529 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
530 * ppc-dis.c (ppc_opts): Likewise.
531 Rename "ppca2" to "a2".
533 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
535 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
537 2009-09-29 DJ Delorie <dj@redhat.com>
539 * Makefile.am: Add RX files.
540 * configure.in: Add support for RX target.
541 * disassemble.c: Likewise.
542 * Makefile.in: Regenerate.
543 * configure: Regenerate.
545 * rx-decode.c: New file.
546 * rx-decode.opc: New file.
547 * rx-dis.c: New file.
549 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
551 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
552 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
554 2009-09-25 Michael Eager <eager@eagercon.com>
556 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
557 microblaze_decode_insn): Add declarations.
558 (get_delay_slots_microblaze): Remove.
560 2009-09-25 Martin Thuresson <martint@google.com>
562 Update sources to make arc and arm targets compile cleanly with
564 * arc-dis.c Fix casts.
565 * arc-ext.c: Add casts.
566 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
569 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
571 * i386-gen.c (opcode_modifiers): Remove Vex256.
572 (set_bitfield): Handle XXX=V.
574 * i386-opc.h (Vex): Update comments.
577 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
579 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
580 * i386-tbl.h: Regenerated.
582 2009-09-23 Nick Clifton <nickc@redhat.com>
584 * po/fr.po: Updated French translation.
586 2009-09-21 Ben Elliston <bje@au.ibm.com>
587 Peter Bergner <bergner@vnet.ibm.com>
589 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
590 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
591 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
592 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
594 (ERAT_T): New operand.
595 (XWC_MASK): New mask.
599 2009-09-18 Nick Clifton <nickc@redhat.com>
601 * po/es.po: Updated Spanish translation.
602 * po/vi.po: Updated Vietnamese translation.
604 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
606 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
609 2009-09-14 Nick Clifton <nickc@redhat.com>
611 * po/nl.po: Updated Dutch translation.
613 2009-09-11 Nick Clifton <nickc@redhat.com>
615 * po/opcodes.pot: Updated by the Translation project.
617 2009-09-11 Martin Thuresson <martint@google.com>
619 Updated sources to compile cleanly with -Wc++-compat:
620 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
621 * ldcref.c: Add casts.
622 * ldctor.c: Add casts.
624 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
625 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
626 * ldlang.h (enum statement_enum): Move to top level.
627 * ldmain.c: Add casts.
628 * ldwrite.c: Add casts.
629 * lexsup.c: Add casts. (enum control_enum): Move to top level.
630 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
632 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
634 * s390-dis.c (print_insn_s390): Avoid 'long long'.
636 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
638 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
639 (print_insn_s390): Signextend and shift pcrel operands before printing.
641 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
643 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
644 VEX_LEN_AE_R_X_M_0 in comments.
646 2009-09-08 DJ Delorie <dj@redhat.com>
648 * mep-opc.c: Regenerate.
650 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
652 * z8kgen.c (struct op): Replace unused flavor with id.
653 (opt): Remove extra xorb entry.
654 (func): Use id field as fallback.
655 (sub): Return new string, caller changed.
656 (internal): Allocate end marker. Assign unique id before sorting.
657 (gas): Likewise. Fix loop end condition.
658 * z8k-opc.h: Regenerate.
660 2009-09-08 Alan Modra <amodra@bigpond.net.au>
662 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
664 2009-09-07 Alan Modra <amodra@bigpond.net.au>
666 * z8kgen.c (func): Fix thinko last patch.
668 2009-09-07 Alan Modra <amodra@bigpond.net.au>
670 * z8kgen.c (func): Stabilize qsort of identically named entries.
671 * z8k-opc.h: Regenerate.
673 2009-09-07 Tristan Gingold <gingold@adacore.com>
675 * po/opcodes.pot: Regenerate.
677 2009-09-07 Alan Modra <amodra@bigpond.net.au>
679 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
680 * configure: Regenerate.
681 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
682 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
683 (i386-gen, ia64-gen, z8kgen): ..here.
684 * Makefile.in: Regenerate.
686 2009-09-07 Tristan Gingold <gingold@adacore.com>
688 * z8k-opc.h: Regenerate.
690 2009-09-05 Martin Thuresson <martin@mtme.org>
692 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
693 * m88k-dis.c (m88kdis): Rename variable class to in_class.
694 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
695 Rename argument class to symbol_class.
697 2009-09-04 Jie Zhang <jie.zhang@analog.com>
699 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
700 to the new encoding of DBGA, DBGAH, and DBGAL.
701 (_print_insn_bfin): Likewise.
703 2009-09-03 Jie Zhang <jie.zhang@analog.com>
705 * bfin-dis.c (_print_insn_bfin): Don't declare.
706 (print_insn_bfin): Don't declare.
707 (dregs_pair): Remove.
708 (ignore_bits): Remove.
711 2009-09-03 Jie Zhang <jie.zhang@analog.com>
713 * bfin-dis.c (IS_DREG): Define.
719 (decode_REGMV_0): Check illegal register move instructions.
721 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
723 * Makefile.am (BUILD_LIBINTL): New variable.
724 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
725 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
726 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
727 * Makefile.in: Regenerate.
729 2009-09-01 DJ Delorie <dj@redhat.com>
731 * mep-asm.c: Regenerate.
732 * mep-desc.c: Regenerate.
733 * mep-opc.c: Regenerate.
735 2009-09-01 Tristan Gingold <gingold@adacore.com>
737 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
738 dependencies. Remove unused FORMAT variable.
739 * configure.com: New file to create build.com DCL script for
740 Itanium VMS or Alpha VMS.
742 2009-08-29 Martin Thuresson <martin@mtme.org>
744 * cris-dis.c (bytes_to_skip): Update code to use new name.
745 * i386-dis.c (putop): Update code to use new name.
746 * i386-gen.c (process_i386_opcodes): Update code to use
748 * i386-opc.h (struct template): Rename struct template to
749 insn_template. Update code accordingly.
750 * i386-tbl.h (i386_optab): Update type to use new name.
751 * ia64-dis.c (print_insn_ia64): Rename variable template
753 * tic30-dis.c (struct instruction, get_tic30_instruction):
754 Update code to use new name.
755 * tic54x-dis.c (has_lkaddr, get_insn_size)
756 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
757 Update code to use new name.
758 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
759 Update type to new name.
760 * z8kgen.c (internal, gas): Rename variable new to new_op.
762 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
764 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
765 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
766 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
767 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
768 * Makefile.in: Regenerated.
770 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
772 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
773 [INSTALL_LIBBFD]: ... here, ...
774 [INSTALL_LIBBFD]: ... and empty overrides here.
775 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
776 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
777 * Makefile.in: Regenerate.
778 * configure: Regenerate.
780 2009-08-26 Philippe De Muyter <phdm@macqel.be>
782 * m68k-dis.c (print_insn_arg): Add movecr register names for
783 coldfire v4e families.
785 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
787 * Makefile.am (SUBDIRS): Build '.' before 'po'.
788 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
789 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
790 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
791 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
792 (i386-gen.o): New rule.
793 ($(srcdir)/i386-init.h): Adjust.
794 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
795 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
796 (ia64-gen.o): New rule.
797 (ia64_asmtab_deps): New variable.
798 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
799 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
800 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
802 (s390-opc.tab): Adjust.
803 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
805 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
806 * Makefile.in: Regenerate.
807 * z8kgen.c (gas): Avoid '/*' in comment.
808 * z8k-opc.h (func): Regenerate.
810 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
812 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
813 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
814 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
815 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
817 (LIBOPCODES_CFILES): New variable, adding to
818 TARGET_LIBOPCODES_CFILES also non-target library sources.
819 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
821 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
822 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
823 * Makefile.in: Regenerate.
824 * po/POTFILES.in: Regenerate.
826 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
828 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
829 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
830 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
831 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
832 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
833 is built shared even if it is not to be installed.
834 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
835 (install_libopcodes, uninstall_libopcodes): Remove.
836 (AM_CPPFLAGS): Renamed from ...
837 (INCLUDES): ... this.
838 * Makefile.in: Regenerate.
840 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
841 1.11, foreign, no-dist.
842 (MKDEP, m32c_opc_h): Remove variables.
843 (disassemble.lo): Rewrite using automake-style dependency
844 tracking rules; only list the dependency upon the primary source
845 file, but no included headers.
846 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
847 (i386-gen.o, ia64-gen.o): Remove dependency statements.
848 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
849 ensure all dependency fragments are included in the Makefile.
850 (s390-opc.lo): Depend on s390-opc.tab.
851 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
852 (mkdep section): Remove.
853 * Makefile.in: Regenerate.
854 * po/POTFILES.in: Regenerate.
856 * Makefile.am (install-pdf, install-html): Remove.
857 * Makefile.in: Regenerate.
859 * Makefile.in: Regenerate.
860 * aclocal.m4: Likewise.
861 * config.in: Likewise.
862 * configure: Likewise.
864 2009-08-06 Michael Eager <eager@eagercon.com>
866 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
867 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
868 * Makefile.in: Regenerate.
869 * configure.in: Add bfd_microblaze_arch target.
870 * configure: Regenerate.
871 * disassemble.c: Define ARCH_microblaze, return
872 print_insn_microblaze().
873 * microblaze-dis.c: New MicroBlaze disassembler.
874 * microblaze-opc.h: New MicroBlaze opcode definitions.
875 * microblaze-opcm.h: New MicroBlaze opcode types.
877 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
879 * configure.in: Handle bfd_l1om_arch.
880 * disassemble.c (disassembler): Likewise.
882 * configure: Regenerated.
884 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
885 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
887 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
889 (cpu_flags): Add CpuL1OM.
890 (set_bitfield): Take an argument to set the value field.
891 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
892 (process_i386_opcode_modifier): Updated.
893 (process_i386_operand_type): Likewise.
894 * i386-init.h: Regenerated.
895 * i386-tbl.h: Likewise.
897 * i386-opc.h (CpuL1OM): New.
899 (i386_cpu_flags): Add cpul1om.
901 2009-07-24 Jan Beulich <jbeulich@novell.com>
903 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
905 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
906 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
907 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
908 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
910 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
912 * i386-opc.tbl: Qualify floating point instructions by their
913 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
914 and fsincos to be avilable only on 387. Fix fstsw ax to be
915 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
917 * i386-init.h, i386-tbl.h: Regenerate.
919 2009-07-20 Nick Clifton <nickc@redhat.com>
922 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
923 offset or indexed based addressing mode 3.
925 2009-07-14 Nick Clifton <nickc@redhat.com>
928 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
930 (arm_decode_shift): Catch illegal register based shifts.
931 (print_insn_arm): Properly handle negative register r0
932 post-indexed addressing.
934 2009-07-10 Doug Kwan <dougkwan@google.com>
936 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
937 lower 32 bits of long types to make hexadecimal output consistent
938 on both 32-bit and 64-bit hosts.
940 2009-07-10 Alan Modra <amodra@bigpond.net.au>
942 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
943 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
944 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
945 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
946 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
947 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
948 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
949 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
950 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
951 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
952 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
953 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
955 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
957 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
959 2009-07-07 Nick Clifton <nickc@redhat.com>
962 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
965 2009-07-06 DJ Delorie <dj@redhat.com>
967 * mep-desc.c: Regenerate.
968 * mep-desc.h: Regenerate.
969 * mep-opc.c: Regenerate.
970 * mep-opc.h: Regenerate.
972 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
974 * i386-opc.h (CpuFMA4): Add CpuFMA4.
975 (i386_cpu_flags): New.
976 * i386-gen.c: Add CPU_FMA4_FLAGS.
977 * i386-opc.tbl: Add FMA4 instructions.
978 * i386-tbl.h: Regenerate.
979 * i386-init.h: Regenerate.
980 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
981 (OP_XMM_VexW): Ditto.
983 (VEXI4_Fixup): Ditto.
984 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
985 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
986 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
987 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
988 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
989 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
990 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
991 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
992 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
993 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
994 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
995 (get_vex_imm8): New. handle FMA4.
996 (OP_EX_VexReg): Ditto.
998 2009-06-30 Nick Clifton <nickc@redhat.com>
1001 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
1002 LFM and SFM instructions as comments,.
1003 Improve consistency of formatting for instructions displayed as
1004 comments and decimal values displayed with their hexadecimal
1006 Formatting tidy ups.
1008 2009-06-29 Nick Clifton <nickc@redhat.com>
1011 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
1012 boundary between variaant and generic coprocessor instuctions.
1013 (coprocessor): Use it.
1014 Fix architecture version of MCRR and MRRC instructions.
1015 (arm_opcdes): Fix patterns for STRB and STRH instructions.
1016 (print_insn_coprocessor): Check architecture and extension masks.
1017 Print a hexadecimal version of any decimal constant that is
1018 outside of the range of -16 to +32.
1019 (print_arm_address): Add a return value of the offset used in the
1020 adress, if it is worth printing a hexadecimal version of it.
1021 (print_insn_neon): Print a hexadecimal version of any decimal
1022 constant that is outside of the range of -16 to +32.
1023 (print_insn_arm): Likewise.
1024 (print_insn_thumb16): Likewise.
1025 (print_insn_thumb32): Likewise.
1028 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
1029 of an undefined instruction.
1030 (arm_opcodes): Use it.
1031 (thumb_opcod): Use it.
1032 (thumb32_opc): Use it.
1034 2009-06-23 DJ Delorie <dj@redhat.com>
1036 * mep-desc.c: Regenerate.
1037 * mep-desc.h: Regenerate.
1038 * mep-dis.c: Regenerate.
1039 * mep-ibld.c: Regenerate.
1040 * mep-opc.c: Regenerate.
1042 * mep-asm.c: Regenerate.
1043 * mep-opc.c: Regenerate.
1044 * mep-opc.h: Regenerate.
1046 2009-06-22 Nick Clifton <nickc@redhat.com>
1048 * po/fi.po: Updated Finish translation.
1050 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1052 * m32c-asm.c: Regenerate.
1054 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1056 * score-dis.c (print_insn_score48, print_insn_score32): Move default
1057 case label to proper lexical block.
1058 * score7-dis.c (print_insn_score32): Likewise.
1060 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
1062 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
1063 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
1064 * s390-opc.txt (nopr, nop): Use new instruction format.
1066 2009-06-18 Nick Clifton <nickc@redhat.com>
1069 * arm-dis.c (print_insn_coprocessor): Check that a user specified
1070 ARM architecture supports the matched instruction.
1071 (print_insn_arm): Likewise.
1072 (select_arm_features): New function. Fills in the fields of an
1073 arm_feature_set structure based on a given arm machine number.
1074 (print_insn): Initialise an arm_feature_set structure.
1076 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
1078 * vax-dis.c (is_function_entry): Return success for synthetic
1080 (is_plt_tail): New function.
1081 (print_insn_vax): Decode PLT entry offset longword.
1083 2009-06-15 Nick Clifton <nickc@redhat.com>
1086 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
1090 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
1092 2009-06-15 Nick Clifton <nickc@redhat.com>
1095 * arm-dis.c (print_insn): Ignore is_data if the user has requested
1096 the disassembly of data as well as instructions.
1098 2009-06-11 Doug Evans <dje@sebabeach.org>
1100 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
1102 2009-06-11 Anthony Green <green@moxielogic.com>
1104 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
1105 (moxie_form3_opc_info): Add branch instructions.
1106 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
1107 encoded instructions.
1109 2009-06-06 Anthony Green <green@moxielogic.com>
1111 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
1112 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
1114 2009-06-04 Alan Modra <amodra@bigpond.net.au>
1116 * dep-in.sed: Don't use \n in replacement part of s command.
1117 * Makefile.am (DEP1): LC_ALL for uniq.
1118 * Makefile.in: Regenerate.
1120 2009-06-02 Nick Clifton <nickc@redhat.com>
1122 * po/nl.po: Updated Dutch translation.
1124 2009-06-02 Tristan Gingold <gingold@adacore.com>
1126 * ia64-gen.c (parse_resource_users, print_dependency_table,
1127 add_dis_table_ent, finish_distable, insert_bit_table_ent,
1128 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1129 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1130 insert_completer_entry, print_completer_entry, print_completer_table,
1131 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1133 2009-05-28 DJ Delorie <dj@redhat.com>
1135 * mep-asm.c: Regenerate.
1136 * mep-desc.c: Regenerate.
1138 2009-05-26 DJ Delorie <dj@redhat.com>
1140 * mep-asm.c: Regenerate.
1141 * mep-desc.c: Regenerate.
1142 * mep-desc.h: Regenerate.
1143 * mep-dis.c: Regenerate.
1144 * mep-ibld.c: Regenerate.
1145 * mep-opc.c: Regenerate.
1146 * mep-opc.h: Regenerate.
1148 2009-05-26 Nick Clifton <nickc@redhat.com>
1150 * po/id.po: Updated Indonesian translation.
1151 * po/opcodes.pot: Updated template file.
1153 2009-05-26 Alan Modra <amodra@bigpond.net.au>
1155 * dep-in.sed: Don't modify .o to .lo here. Output one filename
1156 per line with all lines having continuation backslash. Prefix
1157 first line with "A", following lines with "B".
1158 * Makefile.am (DEP): Don't use dep.sed here.
1159 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
1160 dep.sed here on dependencies, sort and uniq.
1161 * Makefile.in: Regenerate.
1163 2009-05-25 Tristan Gingold <gingold@adacore.com>
1165 * makefile.vms (OPT): New variable.
1166 (CFLAGS): Update compilation flags.
1168 2009-05-22 DJ Delorie <dj@redhat.com>
1170 * mep-asm.c: Regenerate.
1171 * mep-desc.c: Regenerate.
1172 * mep-desc.h: Regenerate.
1173 * mep-dis.c: Regenerate.
1174 * mep-ibld.c: Regenerate.
1175 * mep-opc.c: Regenerate.
1176 * mep-opc.h: Regenerate.
1178 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
1180 * i386-opc.h (Cpusse5): Delete.
1181 (i386_cpu_flags): Delete.
1182 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1183 * i386-opc.tbl: Remove SSE5 instructions.
1184 * i386-tbl.h: Regenerate.
1185 * i386-init.h: Regenerate.
1186 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1187 (print_drex_arg): Delete.
1190 (OP_DREX_ICMP): Delete.
1191 (OP_DREX_FCMP): Delete.
1193 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1195 2009-05-22 Alan Modra <amodra@bigpond.net.au>
1197 * Makefile.am: Run "make dep-am".
1198 * Makefile.in: Regenerate.
1199 * po/POTFILES.in: Regenerate.
1201 2009-05-19 DJ Delorie <dj@redhat.com>
1203 * mep-asm.c: Regenerate.
1204 * mep-opc.c: Regenerate.
1206 2009-04-30 DJ Delorie <dj@redhat.com>
1208 * mep-asm.c: Regenerate.
1209 * mep-desc.c: Regenerate.
1210 * mep-desc.h: Regenerate.
1211 * mep-dis.c: Regenerate.
1212 * mep-ibld.c: Regenerate.
1213 * mep-opc.c: Regenerate.
1214 * mep-opc.h: Regenerate.
1216 2009-04-17 DJ Delorie <dj@redhat.com
1218 * mep-desc.c: Regenerate.
1219 * mep-ibld.c: Regenerate.
1220 * mep-opc.c: Regenerate.
1221 * mep-opc.h: Regenerate.
1223 2009-04-15 Anthony Green <green@moxielogic.com>
1225 * moxie-opc.c, moxie-dis.c: Created.
1226 * Makefile.am: Build the moxie source files.
1227 * configure.in: Add moxie support.
1228 * Makefile.in, configure: Rebuilt.
1229 * disassemble.c (disassembler): Add moxie support.
1230 (ARCH_moxie): Define.
1232 2009-04-15 Jan Beulich <jbeulich@novell.com>
1234 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1236 (pshab, pshaw, pshad, pshaq): Likewise.
1237 * i386-tbl.h: Re-generate.
1239 2009-04-08 DJ Delorie <dj@redhat.com
1241 * mep-asm.c: Regenerate.
1242 * mep-desc.c: Regenerate.
1243 * mep-desc.h: Regenerate.
1244 * mep-dis.c: Regenerate.
1245 * mep-ibld.c: Regenerate.
1246 * mep-opc.c: Regenerate.
1247 * mep-opc.h: Regenerate.
1249 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1251 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1252 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1253 Reorder entries so the extended mnemonics are listed before tlbilx.
1255 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1257 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1259 (print_insn_powerpc): Make sure we only deprecate instructions using
1260 the original dialect and not a modified dialect due to -Many handling.
1261 Move the handling of the condition register and default operands to
1262 the end of the if/else if/else chain.
1263 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1264 instructions from newer processors are listed before older ones.
1265 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1266 that have instructions with conflicting opcodes.
1268 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1270 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1273 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1275 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1277 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1279 * arm-dis.c (print_insn): Also check section matches in backwards
1280 search for mapping symbol.
1282 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1284 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1286 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1288 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1289 * Makefile.am: Run "make dep-am".
1290 * Makefile.in: Regenerate.
1291 * openrisc-opc.c: Regenerate.
1293 2009-03-10 Nick Clifton <nickc@redhat.com>
1295 * po/id.po: Updated Indonesian translation.
1297 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1299 * ppc-dis.c: Include "opintl.h".
1300 (struct ppc_mopt, ppc_opts): New.
1301 (ppc_parse_cpu): New function.
1302 (powerpc_init_dialect): Use it.
1303 (print_ppc_disassembler_options): Dump options from ppc_opts.
1304 Internationalize message.
1306 2009-03-06 Nick Clifton <nickc@redhat.com>
1308 * po/es.po: Updated Spanish translation.
1310 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1313 * configure.in: Test for ld --as-needed support. Link shared
1314 libopcodes against libm.
1315 * configure: Regenerate.
1317 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1319 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1320 instructions from newer processors are listed before older ones.
1322 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1324 * Makefile.am: Run "make dep-am".
1325 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1327 * Makefile.in: Regenerate.
1329 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1331 * score7-dis.c: New file.
1332 * Makefile.am: Add dependencies for score7-dis.c.
1333 * Makefile.in: Regenerate.
1334 * configure.in: Add score7-dis to score files.
1335 * configure: Regenerate.
1336 * score-dis.c: Add support for score7 architecture.
1337 * score-opc.h: Likewise.
1339 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1341 * configure: Regenerate.
1343 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1345 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1347 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1349 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1350 the power7 and the isel instructions.
1351 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1352 (insert_dm, extract_dm): Likewise.
1353 (XB6): Update comment to include XX2 form.
1354 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1355 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1356 (RemoveXX3DM): Delete.
1357 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1358 "mftgpr">: Deprecate for POWER7.
1359 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1360 "frsqrte.">: Deprecate the three operand form and enable the two
1361 operand form for POWER7 and later.
1362 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1363 <"waitsrv", "waitimpl">: Add extended opcodes.
1364 <"ldbrx", "stdbrx">: Enable for POWER7.
1365 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1366 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1367 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1368 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1369 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1370 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1371 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1372 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1373 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1374 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1375 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1376 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1377 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1378 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1379 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1380 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1381 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1382 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1383 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1384 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1385 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1386 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1387 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1388 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1389 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1390 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1391 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1392 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1393 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1394 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1395 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1396 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1397 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1398 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1399 "xxspltw", "xxswapd">: Add VSX opcodes.
1401 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1403 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1404 (operand_types): Remove Vex_Imm4.
1406 * i386-opc.h (Vex_Imm4): Removed.
1408 (i386_operand_type): Remove vex_imm4.
1410 * i386-opc.tbl: Remove Vex_Imm4 comments.
1411 * i386-init.h: Regenerated.
1412 * i386-tbl.h: Likewise.
1414 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1416 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1417 vq{r}shr{u}n.s64 insnstructions.
1419 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1421 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1422 operand to be a float point register (FRT/FRS).
1424 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1426 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1427 dmfc2 and dmtc2 before the architecture-level variants.
1429 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1431 * fr30-opc.c: Regenerate.
1432 * frv-opc.c: Regenerate.
1433 * ip2k-opc.c: Regenerate.
1434 * iq2000-opc.c: Regenerate.
1435 * lm32-opc.c: Regenerate.
1436 * m32c-opc.c: Regenerate.
1437 * m32r-opc.c: Regenerate.
1438 * mep-opc.c: Regenerate.
1439 * mt-opc.c: Regenerate.
1440 * xc16x-opc.c: Regenerate.
1441 * xstormy16-opc.c: Regenerate.
1442 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1445 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1447 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1449 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1451 * ppc-opc.c: Update copyright year.
1452 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1453 ordering for POWER4 and later and use the correct Server ordering.
1455 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1457 AVX Programming Reference (January, 2009)
1458 * i386-dis.c (PREFIX_VEX_3A44): New.
1459 (VEX_LEN_3A44_P_2): Likewise.
1460 (PREFIX_VEX_3A48): Updated.
1461 (VEX_LEN_3A4C_P_2): Likewise.
1462 (prefix_table): Add PREFIX_VEX_3A44.
1463 (vex_table): Likewise.
1464 (vex_len_table): Add VEX_LEN_3A44_P_2.
1466 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1467 * i386-tbl.h: Regenerated.
1469 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1471 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1472 (mips_arch_choices): Add XLR entry.
1473 * mips-opc.c (XLR): Define.
1474 (mips_builtin_opcodes): Add XLR instructions.
1476 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1478 * Makefile.am: Add install-pdf target.
1479 * po/Make-in: Add install-pdf target.
1480 * Makefile.in: Regenerate.
1482 2009-02-02 DJ Delorie <dj@redhat.com>
1484 * mep-asm.c: Regenerate.
1485 * mep-desc.c: Regenerate.
1486 * mep-desc.h: Regenerate.
1487 * mep-dis.c: Regenerate.
1488 * mep-ibld.c: Regenerate.
1489 * mep-opc.c: Regenerate.
1490 * mep-opc.h: Regenerate.
1492 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1494 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1497 2009-01-28 Chao-ying Fu <fu@mips.com>
1499 * mips-opc.c (suxc1): Add the flag of FP_D.
1501 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1503 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1504 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1505 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1506 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1507 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1508 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1509 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1510 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1512 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1514 * configure.in (commonbfdlib): Delete.
1515 (SHARED_LIBADD): Add pic libiberty if such is available.
1516 * configure: Regenerate.
1517 * po/POTFILES.in: Regenerate.
1519 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1521 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1522 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1523 operand form and enable the four operand form for POWER6 and later.
1524 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1525 three operand form for POWER6 and later.
1527 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1529 * bfin-dis.c (OUTS): Use "%s" as format string.
1531 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1533 * i386-gen.c (cpu_flag_init): Remove a white space.
1534 (operand_type_init): Likewise.
1536 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1538 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1539 * i386-tbl.h: Regenerated.
1541 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1543 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1544 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1545 subS, xorS and cmpS.
1547 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1549 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1550 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1551 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1552 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1555 (set_bitfield): Take an argument, lineno. Don't report lineno
1556 on error if it is -1.
1557 (process_i386_cpu_flag): Take an argument, lineno.
1558 (process_i386_opcode_modifier): Likewise.
1559 (process_i386_operand_type): Likewise.
1560 (output_i386_opcode): Likewise.
1561 (opcode_hash_entry): Add lineno.
1562 (process_i386_opcodes): Updated.
1563 (process_i386_registers): Likewise.
1564 (process_i386_initializers): Likewise.
1566 * i386-opc.h (CpuP4): Removed.
1570 (CpuSYSCALL): Likewise.
1572 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1573 cpuclflush and cpusyscall.
1575 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1577 * i386-init.h: Regenerated.
1578 * i386-tbl.h: Likewise.
1580 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1582 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1583 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1584 (cpu_flags): Add CpuRdtscp.
1585 (set_bitfield): Remove CpuSledgehammer check.
1587 * i386-opc.h (CpuRdtscp): New.
1589 (i386_cpu_flags): Add cpurdtscp.
1591 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1592 * i386-init.h: Regenerated.
1593 * i386-tbl.h: Likewise.
1595 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1597 * ppc-opc.c (PPCNONE): Define.
1599 (powerpc_opcodes): Initialize the new "deprecated" field.
1601 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1603 AVX Programming Reference (December, 2008)
1604 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1605 (VEX_LEN_E7_P_2_M_0): Likewise.
1606 (VEX_LEN_2C_P_1): Updated.
1607 (VEX_LEN_E8_P_2): Likewise.
1608 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1609 (mod_table): Likewise.
1611 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1612 * i386-tbl.h: Regenerated.
1614 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1616 * i386-gen.c (process_copyright): Update for 2009.
1618 * i386-init.h: Regenerated.
1619 * i386-tbl.h: Likewise.
1621 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1623 AVX Programming Reference (December, 2008)
1624 * i386-dis.c (OP_VEX_FMA): Removed.
1625 (OP_EX_VexW): Likewise.
1626 (OP_EX_VexImmW): Likewise.
1627 (OP_XMM_VexW): Likewise.
1628 (VEXI4_Fixup): Likewise.
1629 (VPERMIL2_Fixup): Likewise.
1632 (Vex128FMA): Likewise.
1634 (EXdVexW): Likewise.
1635 (EXqVexW): Likewise.
1636 (EXVexImmW): Likewise.
1638 (VPERMIL2): Likewise.
1639 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1640 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1641 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1642 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1643 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1644 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1645 (get_vex_imm8): Likewise.
1646 (OP_EX_VexReg): Likewise.
1647 vpermil2_op): Likewise.
1649 (vex_w_dq_mode): Likewise.
1650 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1651 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1652 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1654 (PREFIX_VEX_38DB): Likewise.
1655 (PREFIX_VEX_3A4A): Likewise.
1656 (PREFIX_VEX_3A60): Likewise.
1657 (PREFIX_VEX_3ADF): Likewise.
1658 (VEX_LEN_3ADF_P_2): Likewise.
1659 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1660 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1661 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1662 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1663 PREFIX_VEX_3896...PREFIX_VEX_389F,
1664 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1665 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1666 (vex_table): Likewise.
1667 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1668 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1669 (putop): Support "%XW".
1670 (intel_operand_size): Handle vex_w_dq_mode.
1672 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1674 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1675 instructions. Add new FMA instructions.
1676 * i386-tbl.h: Regenerated.
1678 2009-01-02 Matthias Klose <doko@ubuntu.com>
1680 * or32-opc.c (or32_print_register, or32_print_immediate,
1681 disassemble_insn): Don't rely on undefined sprintf behaviour.
1683 For older changes see ChangeLog-2008
1689 version-control: never