1 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-dis.c (print_insn): Set vex.w to 0.
5 2009-12-11 Quentin Neill <quentin.neill@amd.com>
7 * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
8 to avoid fetching ahead for the immediate bytes when OP_E_memory
9 has already been called. Fix indentation.
11 2009-12-11 Nick Clifton <nickc@redhat.com>
13 * Makefile.in: Regenerate.
14 * configure: Regenerate.
15 * arm-dis.c: Fix shadowed variable warnings.
16 * cgen-opc.c: Likewise.
17 * cr16-dis.c: Likewise.
18 * crx-dis.c: Likewise.
19 * d30v-dis.c: Likewise.
20 * fr30-dis.c: Likewise.
21 * frv-opc.c: Likewise.
22 * h8500-dis.c: Likewise.
23 * i386-dis.c: Likewise.
24 * i960-dis.c: Likewise.
25 * ia64-gen.c: Likewise.
26 * ia64-opc.c: Likewise.
27 * m32c-asm.c: Likewise.
28 * m32c-dis.c: Likewise.
29 * m68k-dis.c: Likewise.
30 * maxq-dis.c: Likewise.
31 * mcore-dis.c: Likewise.
32 * mep-asm.c: Likewise.
33 * microblaze-dis.c: Likewise.
34 * mmix-dis.c: Likewise.
35 * ns32k-dis.c: Likewise.
36 * or32-opc.c: Likewise.
37 * s390-dis.c: Likewise.
38 * sh64-dis.c: Likewise.
39 * spu-dis.c: Likewise.
40 * tic30-dis.c: Likewise.
42 2009-12-09 Nick Clifton <nickc@redhat.com>
45 * arm-dis.c (print_insn_arm): Mark insns that use the PC in
46 post-indexed addressing as unpredictable.
48 2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
50 * i386-dis.c (FXSAVE_Fixup): New.
52 (mod_table): Use FXSAVE on fxsave and fxrstor.
54 * i386-opc.tbl: Add fxsave64 and fxrstor64.
55 * i386-tbl.h: Regenerated.
57 2009-12-02 Nick Clifton <nickc@redhat.com>
58 Richard Earnshaw <rearnsha@arm.com>
61 * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
64 2009-11-30 Massimo Ruo Roch <massimo.ruoroch@polito.it>
67 * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
70 2009-11-17 Quentin Neill <quentin.neill@amd.com>
71 Sebastian Pop <sebastian.pop@amd.com>
73 * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
74 decoding the second source operand from the immediate byte.
75 (OP_EX_VexW): Pass an extra integer to identify the second
76 and third source arguments.
78 2009-11-19 H.J. Lu <hongjiu.lu@intel.com>
80 * i386-opc.tbl: Add IsLockable to cmpxch16b.
81 * i386-tbl.h: Regenerated.
83 2009-11-19 Nick Clifton <nickc@redhat.com>
86 * arm-dis.c (print_insn_arm): Do not print an offset of zero when
87 decoding Immediaate Offset addressing.
89 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
92 * i386-dis.c (get_vex_imm8): Do not increment codep.
93 Avoid incrementing bytes_before_imm when OP_E_memory
94 has already forwarded the codep pointer.
95 (OP_EX_VexW): Increment codep to skip mod/rm byte.
97 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
99 * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
100 (VEX_LEN_XOP_08_A1): Removed.
101 (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
103 (vex_len_table): Same.
104 * i386-gen.c (CPU_CVT16_FLAGS): Removed.
105 (cpu_flags): Remove field for CpuCVT16.
106 * i386-opc.h (CpuCVT16): Removed.
107 (i386_cpu_flags): Remove bitfield cpucvt16.
108 (i386-opc.tbl): Remove CVT16 instructions.
109 * i386-init.h: Regenerated.
110 * i386-tbl.h: Regenerated.
112 2009-11-17 Sebastian Pop <sebastian.pop@amd.com>
113 Quentin Neill <quentin.neill@amd.com>
115 * i386-dis.c (OP_Vex_2src_1): New.
116 (OP_Vex_2src_2): New.
120 (VEX_LEN_XOP_08_A0): Added.
121 (VEX_LEN_XOP_08_A1): Added.
122 (VEX_LEN_XOP_09_80): Added.
123 (VEX_LEN_XOP_09_81): Added.
124 (xop_table): Added an entry for XOP_08. Handle xop instructions.
125 (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
126 VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
127 (get_valid_dis386): Handle XOP_08.
129 * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
130 (cpu_flags): Add CpuXOP and CpuCVT16.
131 (opcode_modifiers): Add XOP08, Vex2Sources.
132 * i386-opc.h (CpuXOP): Added.
134 (i386_cpu_flags): Add cpuxop and cpucvt16.
136 (Vex2Sources): Added.
137 (i386_opcode_modifier): Add xop08, vex2sources.
138 * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
139 * i386-init.h: Regenerated.
140 * i386-tbl.h: Regenerated.
142 2009-11-17 Nick Clifton <nickc@redhat.com>
145 * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
146 instruction variants. Add pattern for MRS variant that was being
148 (arm_decode_shift): Place error message in a comment.
149 (print_insn_arm): Note that writing back to the PC is
151 Only print 'p' variants of cmp/cmn/teq/tst instructions if
152 decoding for pre-V6 architectures.
154 2009-11-17 Edward Nevill <edward.nevill@arm.com>
156 * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
158 2009-11-14 Doug Evans <dje@sebabeach.org>
160 * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
162 * Makefile.in: Regenerate.
164 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
166 * i386-dis.c (OP_E_extended): Removed.
168 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
170 * i386-dis.c (print_insn): Check rex_ignored.
172 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
174 * i386-dis.c (ckprefix): Updated to return 0 if number of
175 prefixes > 14 and record the last position for each prefix.
176 (lock_prefix): Removed.
177 (data_prefix): Likewise.
178 (addr_prefix): Likewise.
179 (repz_prefix): Likewise.
180 (repnz_prefix): Likewise.
181 (last_lock_prefix): New.
182 (last_repz_prefix): Likewise.
183 (last_repnz_prefix): Likewise.
184 (last_data_prefix): Likewise.
185 (last_addr_prefix): Likewise.
186 (last_rex_prefix): Likewise.
187 (last_seg_prefix): Likewise.
188 (MAX_CODE_LENGTH): Likewise.
189 (ADDR16_PREFIX): Likewise.
190 (ADDR32_PREFIX): Likewise.
191 (DATA16_PREFIX): Likewise.
192 (DATA32_PREFIX): Likewise.
193 (REP_PREFIX): Likewise.
194 (seg_prefix): Likewise.
195 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
196 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
197 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
198 (get_valid_dis386): Updated.
200 (OP_Monitor): Likewise.
201 (REP_Fixup): Likewise.
202 (print_insn): Display all prefixes.
203 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
204 (intel_operand_size): Likewise.
205 (OP_E_register): Likewise.
208 (OP_IMREG): Likewise.
212 (CRC32_Fixup): Likewise.
213 (MOVBE_Fixup): Likewise.
214 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
216 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
217 used_prefixes only if it is used.
219 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
221 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
222 or, sbb, sub, xor and xchg with register only operands.
223 * i386-tbl.h: Regenerated.
225 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
227 * i386-gen.c (opcode_modifiers): Add IsLockable.
229 * i386-opc.h (IsLockable): New.
230 (i386_opcode_modifier): Add islockable.
232 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
233 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
235 * i386-tbl.h: Regenerated.
237 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
239 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
240 generic coprocessor instructions for FPA loads and stores.
241 (print_insn_coprocessor): Remove %C support. Display address for
242 PC-relative offsets in %A.
244 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
246 * i386-dis.c (all_prefixes): New.
247 (ckprefix): Set all_prefixes.
248 (print_insn): Print all_prefixes instead of lock_prefix,
249 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
251 2009-11-11 Nick Clifton <nickc@redhat.com>
254 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
255 (print_insn_arm): Extend %s format control code to check for
256 unpredictable addressing modes. Add support for %S format control
257 code which suppresses this check.
258 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
259 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
260 PRE_BIT_SET): New macros.
261 (print_insn_coprocessor): Use the new macros instead of magic
263 (print_arm_address): Likewise.
264 (pirnt_insn_arm): Likewise.
265 (print_insn_thumb32): Likewise.
267 2009-11-11 Nick Clifton <nickc@redhat.com>
269 * po/id.po: Updated Indonesian translation.
271 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
273 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
275 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
277 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
278 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
279 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
281 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
284 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
285 Quentin Neill <quentin.neill@amd.com>
287 * opcodes/i386-dis.c (OP_LWPCB_E): New.
290 (USE_XOP_8F_TABLE): New.
292 (REG_XOP_LWPCB): New.
296 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
297 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
299 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
300 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
301 to access to the vex_table.
305 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
306 (cpu_flags): Add CpuLWP.
307 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
308 * opcodes/i386-opc.h (CpuLWP): New.
309 (i386_cpu_flags): Add bit cpulwp.
313 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
314 * opcodes/i386-opc.tbl (llwpcb): Added.
318 2009-11-04 DJ Delorie <dj@redhat.com>
320 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
321 (mvtcp, mvfcp, opecp): Remove.
322 * rx-decode.c: Regenerate.
323 * rx-dis.c (cpen): Remove.
325 2009-11-03 Doug Evans <dje@sebabeach.org>
327 * m32c-desc.c: Regenerate.
328 * mep-desc.c: Regenerate.
330 2009-11-02 Paul Brook <paul@codesourcery.com>
332 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
333 Add VFPv4 instructions.
335 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
337 * i386-dis.c (OP_VEX_FMA): Removed.
339 (Vex128FMA): Removed.
340 (prefix_table): First source operand of FMA4 insns is decoded
341 with Vex not with VexFMA.
342 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
343 when vex.w is set. Third source operand is decoded with
345 2009-10-27 Alan Modra <amodra@bigpond.net.au>
347 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
348 * Makefile.in: Regenerate.
349 * po/POTFILES.in: Regenerate.
351 2009-10-23 Doug Evans <dje@sebabeach.org>
353 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
354 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
355 * cgen-bitset.c: Update.
356 * fr30-desc.h: Regenerate.
357 * frv-desc.h: Regenerate.
358 * ip2k-desc.h: Regenerate.
359 * iq2000-desc.h: Regenerate.
360 * lm32-desc.h: Regenerate.
361 * m32c-desc.h: Regenerate.
362 * m32c-opc.h: Regenerate.
363 * m32r-desc.h: Regenerate.
364 * mep-desc.h: Regenerate.
365 * mt-desc.h: Regenerate.
366 * openrisc-desc.h: Regenerate.
367 * xc16x-desc.h: Regenerate.
368 * xstormy16-desc.h: Regenerate.
370 2009-10-22 DJ Delorie <dj@redhat.com>
372 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
373 * rx-decode.c: Regenerated.
375 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
378 * i386-dis.c: Document LB, LS and LV macros.
379 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
380 with the 64-bit displacement or immediate operand.
381 (putop): Handle LB, LS and LV macros.
383 2009-10-18 Doug Evans <dje@sebabeach.org>
385 * lm32-opinst.c: Regenerate.
386 * m32c-desc.c: Regenerate.
387 * m32r-opinst.c: Regenerate.
388 * openrisc-ibld.c: Regenerate.
389 * xc16x-desc.c: Regenerate.
390 * xc16x-desc.h: Regenerate.
392 2009-10-17 Doug Evans <dje@sebabeach.org>
394 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
395 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
396 sorted alphabetically.
397 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
398 stamp-* rules are sorted alphabetically.
399 * Makefile.in: Regenerate.
401 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
403 * i386-opc.h: Use enum instead of nested macros.
405 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
407 * i386-dis.c: Simplify enums.
409 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
410 Ineiev <ineiev@gmail.com>
413 * i386-dis.c: Use enum instead of nested macros.
415 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
417 * i386-dis.c (MAX_BYTEMODE): Removed.
419 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
422 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
424 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
426 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
429 2009-10-07 Michael Eager <eager@eagercon.com>
431 * microblaze-dis.c: Add include for microblaze-dis.h,
432 eliminate local extern decls.
433 * microblaze-dis.h: New.
435 2009-10-06 Nick Clifton <nickc@redhat.com>
437 * po/fi.po: Updated Finnish translation.
439 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
441 * opc2c.c: Include "libiberty.h" and <errno.h>.
442 (orig_filename): Constify.
443 (dump_lines): Fix line number directive.
444 (main): Set orig_filename to basename of input file. Use
447 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
448 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
449 instead of $(EXEEXT).
450 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
451 $(LINK_FOR_BUILD). Link with libiberty.
452 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
453 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
454 * Makefile.in: Regenerated.
455 * rx-decode.c: Regenerated.
457 2009-10-03 Paul Reed <paulreed@paddedcell.com>
459 * arm-dis.c (print_insn): Check symtab_size not *symtab.
461 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
463 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
464 * i386-tbl.h: Regenerated.
466 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
468 * ppc-dis.c (ppc_opts): Add "476" entry.
469 * ppc-opc.c (PPC476): Define.
470 (powerpc_opcodes): Update mnemonics where required for 476.
472 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
474 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
475 * ppc-dis.c (ppc_opts): Likewise.
476 Rename "ppca2" to "a2".
478 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
480 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
482 2009-09-29 DJ Delorie <dj@redhat.com>
484 * Makefile.am: Add RX files.
485 * configure.in: Add support for RX target.
486 * disassemble.c: Likewise.
487 * Makefile.in: Regenerate.
488 * configure: Regenerate.
490 * rx-decode.c: New file.
491 * rx-decode.opc: New file.
492 * rx-dis.c: New file.
494 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
496 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
497 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
499 2009-09-25 Michael Eager <eager@eagercon.com>
501 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
502 microblaze_decode_insn): Add declarations.
503 (get_delay_slots_microblaze): Remove.
505 2009-09-25 Martin Thuresson <martint@google.com>
507 Update sources to make arc and arm targets compile cleanly with
509 * arc-dis.c Fix casts.
510 * arc-ext.c: Add casts.
511 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
514 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
516 * i386-gen.c (opcode_modifiers): Remove Vex256.
517 (set_bitfield): Handle XXX=V.
519 * i386-opc.h (Vex): Update comments.
522 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
524 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
525 * i386-tbl.h: Regenerated.
527 2009-09-23 Nick Clifton <nickc@redhat.com>
529 * po/fr.po: Updated French translation.
531 2009-09-21 Ben Elliston <bje@au.ibm.com>
532 Peter Bergner <bergner@vnet.ibm.com>
534 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
535 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
536 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
537 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
539 (ERAT_T): New operand.
540 (XWC_MASK): New mask.
544 2009-09-18 Nick Clifton <nickc@redhat.com>
546 * po/es.po: Updated Spanish translation.
547 * po/vi.po: Updated Vietnamese translation.
549 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
551 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
554 2009-09-14 Nick Clifton <nickc@redhat.com>
556 * po/nl.po: Updated Dutch translation.
558 2009-09-11 Nick Clifton <nickc@redhat.com>
560 * po/opcodes.pot: Updated by the Translation project.
562 2009-09-11 Martin Thuresson <martint@google.com>
564 Updated sources to compile cleanly with -Wc++-compat:
565 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
566 * ldcref.c: Add casts.
567 * ldctor.c: Add casts.
569 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
570 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
571 * ldlang.h (enum statement_enum): Move to top level.
572 * ldmain.c: Add casts.
573 * ldwrite.c: Add casts.
574 * lexsup.c: Add casts. (enum control_enum): Move to top level.
575 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
577 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
579 * s390-dis.c (print_insn_s390): Avoid 'long long'.
581 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
583 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
584 (print_insn_s390): Signextend and shift pcrel operands before printing.
586 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
588 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
589 VEX_LEN_AE_R_X_M_0 in comments.
591 2009-09-08 DJ Delorie <dj@redhat.com>
593 * mep-opc.c: Regenerate.
595 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
597 * z8kgen.c (struct op): Replace unused flavor with id.
598 (opt): Remove extra xorb entry.
599 (func): Use id field as fallback.
600 (sub): Return new string, caller changed.
601 (internal): Allocate end marker. Assign unique id before sorting.
602 (gas): Likewise. Fix loop end condition.
603 * z8k-opc.h: Regenerate.
605 2009-09-08 Alan Modra <amodra@bigpond.net.au>
607 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
609 2009-09-07 Alan Modra <amodra@bigpond.net.au>
611 * z8kgen.c (func): Fix thinko last patch.
613 2009-09-07 Alan Modra <amodra@bigpond.net.au>
615 * z8kgen.c (func): Stabilize qsort of identically named entries.
616 * z8k-opc.h: Regenerate.
618 2009-09-07 Tristan Gingold <gingold@adacore.com>
620 * po/opcodes.pot: Regenerate.
622 2009-09-07 Alan Modra <amodra@bigpond.net.au>
624 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
625 * configure: Regenerate.
626 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
627 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
628 (i386-gen, ia64-gen, z8kgen): ..here.
629 * Makefile.in: Regenerate.
631 2009-09-07 Tristan Gingold <gingold@adacore.com>
633 * z8k-opc.h: Regenerate.
635 2009-09-05 Martin Thuresson <martin@mtme.org>
637 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
638 * m88k-dis.c (m88kdis): Rename variable class to in_class.
639 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
640 Rename argument class to symbol_class.
642 2009-09-04 Jie Zhang <jie.zhang@analog.com>
644 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
645 to the new encoding of DBGA, DBGAH, and DBGAL.
646 (_print_insn_bfin): Likewise.
648 2009-09-03 Jie Zhang <jie.zhang@analog.com>
650 * bfin-dis.c (_print_insn_bfin): Don't declare.
651 (print_insn_bfin): Don't declare.
652 (dregs_pair): Remove.
653 (ignore_bits): Remove.
656 2009-09-03 Jie Zhang <jie.zhang@analog.com>
658 * bfin-dis.c (IS_DREG): Define.
664 (decode_REGMV_0): Check illegal register move instructions.
666 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
668 * Makefile.am (BUILD_LIBINTL): New variable.
669 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
670 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
671 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
672 * Makefile.in: Regenerate.
674 2009-09-01 DJ Delorie <dj@redhat.com>
676 * mep-asm.c: Regenerate.
677 * mep-desc.c: Regenerate.
678 * mep-opc.c: Regenerate.
680 2009-09-01 Tristan Gingold <gingold@adacore.com>
682 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
683 dependencies. Remove unused FORMAT variable.
684 * configure.com: New file to create build.com DCL script for
685 Itanium VMS or Alpha VMS.
687 2009-08-29 Martin Thuresson <martin@mtme.org>
689 * cris-dis.c (bytes_to_skip): Update code to use new name.
690 * i386-dis.c (putop): Update code to use new name.
691 * i386-gen.c (process_i386_opcodes): Update code to use
693 * i386-opc.h (struct template): Rename struct template to
694 insn_template. Update code accordingly.
695 * i386-tbl.h (i386_optab): Update type to use new name.
696 * ia64-dis.c (print_insn_ia64): Rename variable template
698 * tic30-dis.c (struct instruction, get_tic30_instruction):
699 Update code to use new name.
700 * tic54x-dis.c (has_lkaddr, get_insn_size)
701 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
702 Update code to use new name.
703 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
704 Update type to new name.
705 * z8kgen.c (internal, gas): Rename variable new to new_op.
707 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
709 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
710 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
711 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
712 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
713 * Makefile.in: Regenerated.
715 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
717 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
718 [INSTALL_LIBBFD]: ... here, ...
719 [INSTALL_LIBBFD]: ... and empty overrides here.
720 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
721 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
722 * Makefile.in: Regenerate.
723 * configure: Regenerate.
725 2009-08-26 Philippe De Muyter <phdm@macqel.be>
727 * m68k-dis.c (print_insn_arg): Add movecr register names for
728 coldfire v4e families.
730 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
732 * Makefile.am (SUBDIRS): Build '.' before 'po'.
733 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
734 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
735 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
736 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
737 (i386-gen.o): New rule.
738 ($(srcdir)/i386-init.h): Adjust.
739 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
740 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
741 (ia64-gen.o): New rule.
742 (ia64_asmtab_deps): New variable.
743 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
744 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
745 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
747 (s390-opc.tab): Adjust.
748 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
750 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
751 * Makefile.in: Regenerate.
752 * z8kgen.c (gas): Avoid '/*' in comment.
753 * z8k-opc.h (func): Regenerate.
755 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
757 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
758 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
759 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
760 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
762 (LIBOPCODES_CFILES): New variable, adding to
763 TARGET_LIBOPCODES_CFILES also non-target library sources.
764 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
766 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
767 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
768 * Makefile.in: Regenerate.
769 * po/POTFILES.in: Regenerate.
771 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
773 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
774 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
775 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
776 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
777 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
778 is built shared even if it is not to be installed.
779 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
780 (install_libopcodes, uninstall_libopcodes): Remove.
781 (AM_CPPFLAGS): Renamed from ...
782 (INCLUDES): ... this.
783 * Makefile.in: Regenerate.
785 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
786 1.11, foreign, no-dist.
787 (MKDEP, m32c_opc_h): Remove variables.
788 (disassemble.lo): Rewrite using automake-style dependency
789 tracking rules; only list the dependency upon the primary source
790 file, but no included headers.
791 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
792 (i386-gen.o, ia64-gen.o): Remove dependency statements.
793 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
794 ensure all dependency fragments are included in the Makefile.
795 (s390-opc.lo): Depend on s390-opc.tab.
796 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
797 (mkdep section): Remove.
798 * Makefile.in: Regenerate.
799 * po/POTFILES.in: Regenerate.
801 * Makefile.am (install-pdf, install-html): Remove.
802 * Makefile.in: Regenerate.
804 * Makefile.in: Regenerate.
805 * aclocal.m4: Likewise.
806 * config.in: Likewise.
807 * configure: Likewise.
809 2009-08-06 Michael Eager <eager@eagercon.com>
811 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
812 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
813 * Makefile.in: Regenerate.
814 * configure.in: Add bfd_microblaze_arch target.
815 * configure: Regenerate.
816 * disassemble.c: Define ARCH_microblaze, return
817 print_insn_microblaze().
818 * microblaze-dis.c: New MicroBlaze disassembler.
819 * microblaze-opc.h: New MicroBlaze opcode definitions.
820 * microblaze-opcm.h: New MicroBlaze opcode types.
822 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
824 * configure.in: Handle bfd_l1om_arch.
825 * disassemble.c (disassembler): Likewise.
827 * configure: Regenerated.
829 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
830 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
832 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
834 (cpu_flags): Add CpuL1OM.
835 (set_bitfield): Take an argument to set the value field.
836 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
837 (process_i386_opcode_modifier): Updated.
838 (process_i386_operand_type): Likewise.
839 * i386-init.h: Regenerated.
840 * i386-tbl.h: Likewise.
842 * i386-opc.h (CpuL1OM): New.
844 (i386_cpu_flags): Add cpul1om.
846 2009-07-24 Jan Beulich <jbeulich@novell.com>
848 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
850 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
851 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
852 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
853 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
855 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
857 * i386-opc.tbl: Qualify floating point instructions by their
858 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
859 and fsincos to be avilable only on 387. Fix fstsw ax to be
860 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
862 * i386-init.h, i386-tbl.h: Regenerate.
864 2009-07-20 Nick Clifton <nickc@redhat.com>
867 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
868 offset or indexed based addressing mode 3.
870 2009-07-14 Nick Clifton <nickc@redhat.com>
873 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
875 (arm_decode_shift): Catch illegal register based shifts.
876 (print_insn_arm): Properly handle negative register r0
877 post-indexed addressing.
879 2009-07-10 Doug Kwan <dougkwan@google.com>
881 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
882 lower 32 bits of long types to make hexadecimal output consistent
883 on both 32-bit and 64-bit hosts.
885 2009-07-10 Alan Modra <amodra@bigpond.net.au>
887 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
888 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
889 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
890 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
891 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
892 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
893 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
894 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
895 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
896 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
897 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
898 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
900 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
902 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
904 2009-07-07 Nick Clifton <nickc@redhat.com>
907 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
910 2009-07-06 DJ Delorie <dj@redhat.com>
912 * mep-desc.c: Regenerate.
913 * mep-desc.h: Regenerate.
914 * mep-opc.c: Regenerate.
915 * mep-opc.h: Regenerate.
917 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
919 * i386-opc.h (CpuFMA4): Add CpuFMA4.
920 (i386_cpu_flags): New.
921 * i386-gen.c: Add CPU_FMA4_FLAGS.
922 * i386-opc.tbl: Add FMA4 instructions.
923 * i386-tbl.h: Regenerate.
924 * i386-init.h: Regenerate.
925 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
926 (OP_XMM_VexW): Ditto.
928 (VEXI4_Fixup): Ditto.
929 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
930 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
931 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
932 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
933 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
934 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
935 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
936 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
937 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
938 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
939 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
940 (get_vex_imm8): New. handle FMA4.
941 (OP_EX_VexReg): Ditto.
943 2009-06-30 Nick Clifton <nickc@redhat.com>
946 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
947 LFM and SFM instructions as comments,.
948 Improve consistency of formatting for instructions displayed as
949 comments and decimal values displayed with their hexadecimal
953 2009-06-29 Nick Clifton <nickc@redhat.com>
956 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
957 boundary between variaant and generic coprocessor instuctions.
958 (coprocessor): Use it.
959 Fix architecture version of MCRR and MRRC instructions.
960 (arm_opcdes): Fix patterns for STRB and STRH instructions.
961 (print_insn_coprocessor): Check architecture and extension masks.
962 Print a hexadecimal version of any decimal constant that is
963 outside of the range of -16 to +32.
964 (print_arm_address): Add a return value of the offset used in the
965 adress, if it is worth printing a hexadecimal version of it.
966 (print_insn_neon): Print a hexadecimal version of any decimal
967 constant that is outside of the range of -16 to +32.
968 (print_insn_arm): Likewise.
969 (print_insn_thumb16): Likewise.
970 (print_insn_thumb32): Likewise.
973 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
974 of an undefined instruction.
975 (arm_opcodes): Use it.
976 (thumb_opcod): Use it.
977 (thumb32_opc): Use it.
979 2009-06-23 DJ Delorie <dj@redhat.com>
981 * mep-desc.c: Regenerate.
982 * mep-desc.h: Regenerate.
983 * mep-dis.c: Regenerate.
984 * mep-ibld.c: Regenerate.
985 * mep-opc.c: Regenerate.
987 * mep-asm.c: Regenerate.
988 * mep-opc.c: Regenerate.
989 * mep-opc.h: Regenerate.
991 2009-06-22 Nick Clifton <nickc@redhat.com>
993 * po/fi.po: Updated Finish translation.
995 2009-06-22 Alan Modra <amodra@bigpond.net.au>
997 * m32c-asm.c: Regenerate.
999 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1001 * score-dis.c (print_insn_score48, print_insn_score32): Move default
1002 case label to proper lexical block.
1003 * score7-dis.c (print_insn_score32): Likewise.
1005 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
1007 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
1008 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
1009 * s390-opc.txt (nopr, nop): Use new instruction format.
1011 2009-06-18 Nick Clifton <nickc@redhat.com>
1014 * arm-dis.c (print_insn_coprocessor): Check that a user specified
1015 ARM architecture supports the matched instruction.
1016 (print_insn_arm): Likewise.
1017 (select_arm_features): New function. Fills in the fields of an
1018 arm_feature_set structure based on a given arm machine number.
1019 (print_insn): Initialise an arm_feature_set structure.
1021 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
1023 * vax-dis.c (is_function_entry): Return success for synthetic
1025 (is_plt_tail): New function.
1026 (print_insn_vax): Decode PLT entry offset longword.
1028 2009-06-15 Nick Clifton <nickc@redhat.com>
1031 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
1035 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
1037 2009-06-15 Nick Clifton <nickc@redhat.com>
1040 * arm-dis.c (print_insn): Ignore is_data if the user has requested
1041 the disassembly of data as well as instructions.
1043 2009-06-11 Doug Evans <dje@sebabeach.org>
1045 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
1047 2009-06-11 Anthony Green <green@moxielogic.com>
1049 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
1050 (moxie_form3_opc_info): Add branch instructions.
1051 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
1052 encoded instructions.
1054 2009-06-06 Anthony Green <green@moxielogic.com>
1056 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
1057 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
1059 2009-06-04 Alan Modra <amodra@bigpond.net.au>
1061 * dep-in.sed: Don't use \n in replacement part of s command.
1062 * Makefile.am (DEP1): LC_ALL for uniq.
1063 * Makefile.in: Regenerate.
1065 2009-06-02 Nick Clifton <nickc@redhat.com>
1067 * po/nl.po: Updated Dutch translation.
1069 2009-06-02 Tristan Gingold <gingold@adacore.com>
1071 * ia64-gen.c (parse_resource_users, print_dependency_table,
1072 add_dis_table_ent, finish_distable, insert_bit_table_ent,
1073 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1074 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1075 insert_completer_entry, print_completer_entry, print_completer_table,
1076 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1078 2009-05-28 DJ Delorie <dj@redhat.com>
1080 * mep-asm.c: Regenerate.
1081 * mep-desc.c: Regenerate.
1083 2009-05-26 DJ Delorie <dj@redhat.com>
1085 * mep-asm.c: Regenerate.
1086 * mep-desc.c: Regenerate.
1087 * mep-desc.h: Regenerate.
1088 * mep-dis.c: Regenerate.
1089 * mep-ibld.c: Regenerate.
1090 * mep-opc.c: Regenerate.
1091 * mep-opc.h: Regenerate.
1093 2009-05-26 Nick Clifton <nickc@redhat.com>
1095 * po/id.po: Updated Indonesian translation.
1096 * po/opcodes.pot: Updated template file.
1098 2009-05-26 Alan Modra <amodra@bigpond.net.au>
1100 * dep-in.sed: Don't modify .o to .lo here. Output one filename
1101 per line with all lines having continuation backslash. Prefix
1102 first line with "A", following lines with "B".
1103 * Makefile.am (DEP): Don't use dep.sed here.
1104 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
1105 dep.sed here on dependencies, sort and uniq.
1106 * Makefile.in: Regenerate.
1108 2009-05-25 Tristan Gingold <gingold@adacore.com>
1110 * makefile.vms (OPT): New variable.
1111 (CFLAGS): Update compilation flags.
1113 2009-05-22 DJ Delorie <dj@redhat.com>
1115 * mep-asm.c: Regenerate.
1116 * mep-desc.c: Regenerate.
1117 * mep-desc.h: Regenerate.
1118 * mep-dis.c: Regenerate.
1119 * mep-ibld.c: Regenerate.
1120 * mep-opc.c: Regenerate.
1121 * mep-opc.h: Regenerate.
1123 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
1125 * i386-opc.h (Cpusse5): Delete.
1126 (i386_cpu_flags): Delete.
1127 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1128 * i386-opc.tbl: Remove SSE5 instructions.
1129 * i386-tbl.h: Regenerate.
1130 * i386-init.h: Regenerate.
1131 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1132 (print_drex_arg): Delete.
1135 (OP_DREX_ICMP): Delete.
1136 (OP_DREX_FCMP): Delete.
1138 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1140 2009-05-22 Alan Modra <amodra@bigpond.net.au>
1142 * Makefile.am: Run "make dep-am".
1143 * Makefile.in: Regenerate.
1144 * po/POTFILES.in: Regenerate.
1146 2009-05-19 DJ Delorie <dj@redhat.com>
1148 * mep-asm.c: Regenerate.
1149 * mep-opc.c: Regenerate.
1151 2009-04-30 DJ Delorie <dj@redhat.com>
1153 * mep-asm.c: Regenerate.
1154 * mep-desc.c: Regenerate.
1155 * mep-desc.h: Regenerate.
1156 * mep-dis.c: Regenerate.
1157 * mep-ibld.c: Regenerate.
1158 * mep-opc.c: Regenerate.
1159 * mep-opc.h: Regenerate.
1161 2009-04-17 DJ Delorie <dj@redhat.com
1163 * mep-desc.c: Regenerate.
1164 * mep-ibld.c: Regenerate.
1165 * mep-opc.c: Regenerate.
1166 * mep-opc.h: Regenerate.
1168 2009-04-15 Anthony Green <green@moxielogic.com>
1170 * moxie-opc.c, moxie-dis.c: Created.
1171 * Makefile.am: Build the moxie source files.
1172 * configure.in: Add moxie support.
1173 * Makefile.in, configure: Rebuilt.
1174 * disassemble.c (disassembler): Add moxie support.
1175 (ARCH_moxie): Define.
1177 2009-04-15 Jan Beulich <jbeulich@novell.com>
1179 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1181 (pshab, pshaw, pshad, pshaq): Likewise.
1182 * i386-tbl.h: Re-generate.
1184 2009-04-08 DJ Delorie <dj@redhat.com
1186 * mep-asm.c: Regenerate.
1187 * mep-desc.c: Regenerate.
1188 * mep-desc.h: Regenerate.
1189 * mep-dis.c: Regenerate.
1190 * mep-ibld.c: Regenerate.
1191 * mep-opc.c: Regenerate.
1192 * mep-opc.h: Regenerate.
1194 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1196 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1197 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1198 Reorder entries so the extended mnemonics are listed before tlbilx.
1200 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1202 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1204 (print_insn_powerpc): Make sure we only deprecate instructions using
1205 the original dialect and not a modified dialect due to -Many handling.
1206 Move the handling of the condition register and default operands to
1207 the end of the if/else if/else chain.
1208 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1209 instructions from newer processors are listed before older ones.
1210 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1211 that have instructions with conflicting opcodes.
1213 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1215 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1218 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1220 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1222 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1224 * arm-dis.c (print_insn): Also check section matches in backwards
1225 search for mapping symbol.
1227 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1229 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1231 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1233 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1234 * Makefile.am: Run "make dep-am".
1235 * Makefile.in: Regenerate.
1236 * openrisc-opc.c: Regenerate.
1238 2009-03-10 Nick Clifton <nickc@redhat.com>
1240 * po/id.po: Updated Indonesian translation.
1242 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1244 * ppc-dis.c: Include "opintl.h".
1245 (struct ppc_mopt, ppc_opts): New.
1246 (ppc_parse_cpu): New function.
1247 (powerpc_init_dialect): Use it.
1248 (print_ppc_disassembler_options): Dump options from ppc_opts.
1249 Internationalize message.
1251 2009-03-06 Nick Clifton <nickc@redhat.com>
1253 * po/es.po: Updated Spanish translation.
1255 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1258 * configure.in: Test for ld --as-needed support. Link shared
1259 libopcodes against libm.
1260 * configure: Regenerate.
1262 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1264 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1265 instructions from newer processors are listed before older ones.
1267 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1269 * Makefile.am: Run "make dep-am".
1270 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1272 * Makefile.in: Regenerate.
1274 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1276 * score7-dis.c: New file.
1277 * Makefile.am: Add dependencies for score7-dis.c.
1278 * Makefile.in: Regenerate.
1279 * configure.in: Add score7-dis to score files.
1280 * configure: Regenerate.
1281 * score-dis.c: Add support for score7 architecture.
1282 * score-opc.h: Likewise.
1284 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1286 * configure: Regenerate.
1288 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1290 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1292 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1294 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1295 the power7 and the isel instructions.
1296 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1297 (insert_dm, extract_dm): Likewise.
1298 (XB6): Update comment to include XX2 form.
1299 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1300 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1301 (RemoveXX3DM): Delete.
1302 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1303 "mftgpr">: Deprecate for POWER7.
1304 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1305 "frsqrte.">: Deprecate the three operand form and enable the two
1306 operand form for POWER7 and later.
1307 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1308 <"waitsrv", "waitimpl">: Add extended opcodes.
1309 <"ldbrx", "stdbrx">: Enable for POWER7.
1310 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1311 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1312 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1313 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1314 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1315 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1316 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1317 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1318 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1319 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1320 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1321 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1322 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1323 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1324 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1325 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1326 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1327 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1328 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1329 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1330 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1331 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1332 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1333 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1334 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1335 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1336 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1337 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1338 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1339 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1340 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1341 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1342 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1343 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1344 "xxspltw", "xxswapd">: Add VSX opcodes.
1346 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1348 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1349 (operand_types): Remove Vex_Imm4.
1351 * i386-opc.h (Vex_Imm4): Removed.
1353 (i386_operand_type): Remove vex_imm4.
1355 * i386-opc.tbl: Remove Vex_Imm4 comments.
1356 * i386-init.h: Regenerated.
1357 * i386-tbl.h: Likewise.
1359 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1361 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1362 vq{r}shr{u}n.s64 insnstructions.
1364 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1366 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1367 operand to be a float point register (FRT/FRS).
1369 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1371 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1372 dmfc2 and dmtc2 before the architecture-level variants.
1374 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1376 * fr30-opc.c: Regenerate.
1377 * frv-opc.c: Regenerate.
1378 * ip2k-opc.c: Regenerate.
1379 * iq2000-opc.c: Regenerate.
1380 * lm32-opc.c: Regenerate.
1381 * m32c-opc.c: Regenerate.
1382 * m32r-opc.c: Regenerate.
1383 * mep-opc.c: Regenerate.
1384 * mt-opc.c: Regenerate.
1385 * xc16x-opc.c: Regenerate.
1386 * xstormy16-opc.c: Regenerate.
1387 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1390 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1392 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1394 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1396 * ppc-opc.c: Update copyright year.
1397 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1398 ordering for POWER4 and later and use the correct Server ordering.
1400 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1402 AVX Programming Reference (January, 2009)
1403 * i386-dis.c (PREFIX_VEX_3A44): New.
1404 (VEX_LEN_3A44_P_2): Likewise.
1405 (PREFIX_VEX_3A48): Updated.
1406 (VEX_LEN_3A4C_P_2): Likewise.
1407 (prefix_table): Add PREFIX_VEX_3A44.
1408 (vex_table): Likewise.
1409 (vex_len_table): Add VEX_LEN_3A44_P_2.
1411 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1412 * i386-tbl.h: Regenerated.
1414 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1416 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1417 (mips_arch_choices): Add XLR entry.
1418 * mips-opc.c (XLR): Define.
1419 (mips_builtin_opcodes): Add XLR instructions.
1421 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1423 * Makefile.am: Add install-pdf target.
1424 * po/Make-in: Add install-pdf target.
1425 * Makefile.in: Regenerate.
1427 2009-02-02 DJ Delorie <dj@redhat.com>
1429 * mep-asm.c: Regenerate.
1430 * mep-desc.c: Regenerate.
1431 * mep-desc.h: Regenerate.
1432 * mep-dis.c: Regenerate.
1433 * mep-ibld.c: Regenerate.
1434 * mep-opc.c: Regenerate.
1435 * mep-opc.h: Regenerate.
1437 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1439 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1442 2009-01-28 Chao-ying Fu <fu@mips.com>
1444 * mips-opc.c (suxc1): Add the flag of FP_D.
1446 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1448 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1449 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1450 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1451 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1452 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1453 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1454 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1455 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1457 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1459 * configure.in (commonbfdlib): Delete.
1460 (SHARED_LIBADD): Add pic libiberty if such is available.
1461 * configure: Regenerate.
1462 * po/POTFILES.in: Regenerate.
1464 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1466 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1467 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1468 operand form and enable the four operand form for POWER6 and later.
1469 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1470 three operand form for POWER6 and later.
1472 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1474 * bfin-dis.c (OUTS): Use "%s" as format string.
1476 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1478 * i386-gen.c (cpu_flag_init): Remove a white space.
1479 (operand_type_init): Likewise.
1481 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1483 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1484 * i386-tbl.h: Regenerated.
1486 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1488 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1489 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1490 subS, xorS and cmpS.
1492 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1494 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1495 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1496 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1497 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1500 (set_bitfield): Take an argument, lineno. Don't report lineno
1501 on error if it is -1.
1502 (process_i386_cpu_flag): Take an argument, lineno.
1503 (process_i386_opcode_modifier): Likewise.
1504 (process_i386_operand_type): Likewise.
1505 (output_i386_opcode): Likewise.
1506 (opcode_hash_entry): Add lineno.
1507 (process_i386_opcodes): Updated.
1508 (process_i386_registers): Likewise.
1509 (process_i386_initializers): Likewise.
1511 * i386-opc.h (CpuP4): Removed.
1515 (CpuSYSCALL): Likewise.
1517 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1518 cpuclflush and cpusyscall.
1520 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1522 * i386-init.h: Regenerated.
1523 * i386-tbl.h: Likewise.
1525 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1527 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1528 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1529 (cpu_flags): Add CpuRdtscp.
1530 (set_bitfield): Remove CpuSledgehammer check.
1532 * i386-opc.h (CpuRdtscp): New.
1534 (i386_cpu_flags): Add cpurdtscp.
1536 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1537 * i386-init.h: Regenerated.
1538 * i386-tbl.h: Likewise.
1540 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1542 * ppc-opc.c (PPCNONE): Define.
1544 (powerpc_opcodes): Initialize the new "deprecated" field.
1546 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1548 AVX Programming Reference (December, 2008)
1549 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1550 (VEX_LEN_E7_P_2_M_0): Likewise.
1551 (VEX_LEN_2C_P_1): Updated.
1552 (VEX_LEN_E8_P_2): Likewise.
1553 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1554 (mod_table): Likewise.
1556 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1557 * i386-tbl.h: Regenerated.
1559 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1561 * i386-gen.c (process_copyright): Update for 2009.
1563 * i386-init.h: Regenerated.
1564 * i386-tbl.h: Likewise.
1566 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1568 AVX Programming Reference (December, 2008)
1569 * i386-dis.c (OP_VEX_FMA): Removed.
1570 (OP_EX_VexW): Likewise.
1571 (OP_EX_VexImmW): Likewise.
1572 (OP_XMM_VexW): Likewise.
1573 (VEXI4_Fixup): Likewise.
1574 (VPERMIL2_Fixup): Likewise.
1577 (Vex128FMA): Likewise.
1579 (EXdVexW): Likewise.
1580 (EXqVexW): Likewise.
1581 (EXVexImmW): Likewise.
1583 (VPERMIL2): Likewise.
1584 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1585 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1586 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1587 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1588 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1589 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1590 (get_vex_imm8): Likewise.
1591 (OP_EX_VexReg): Likewise.
1592 vpermil2_op): Likewise.
1594 (vex_w_dq_mode): Likewise.
1595 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1596 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1597 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1599 (PREFIX_VEX_38DB): Likewise.
1600 (PREFIX_VEX_3A4A): Likewise.
1601 (PREFIX_VEX_3A60): Likewise.
1602 (PREFIX_VEX_3ADF): Likewise.
1603 (VEX_LEN_3ADF_P_2): Likewise.
1604 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1605 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1606 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1607 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1608 PREFIX_VEX_3896...PREFIX_VEX_389F,
1609 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1610 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1611 (vex_table): Likewise.
1612 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1613 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1614 (putop): Support "%XW".
1615 (intel_operand_size): Handle vex_w_dq_mode.
1617 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1619 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1620 instructions. Add new FMA instructions.
1621 * i386-tbl.h: Regenerated.
1623 2009-01-02 Matthias Klose <doko@ubuntu.com>
1625 * or32-opc.c (or32_print_register, or32_print_immediate,
1626 disassemble_insn): Don't rely on undefined sprintf behaviour.
1628 For older changes see ChangeLog-2008
1634 version-control: never