1 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
6 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
8 * d10v-opc.c: Add additional information to the opcode
9 table to help determinine which instructions can be done
13 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
15 * mpw-make.sed: Update editing of include pathnames to be
18 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
20 * arm-opc.h: Added "bx" instruction definition.
22 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
24 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
27 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
29 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
31 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
33 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
36 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
38 * makefile.vms: Update for alpha-opc changes.
40 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
42 * i386-dis.c (print_insn_i386): Actually return the correct value.
43 (ONE, OP_ONE): #ifdef out; not used.
46 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
48 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
49 Changed subi operand type to treat 0 as 16.
52 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
54 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
57 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
59 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
60 memory transfer instructions. Add new format string entries %h and %s.
61 * arm-dis.c: (print_insn_arm): Provide decoding of the new
65 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
67 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
68 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
71 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
73 * alpha-dis.c (print_insn_alpha_osf): Remove.
74 (print_insn_alpha_vms): Remove.
75 (print_insn_alpha): Make globally visible. Chose the register
76 names based on info->flavour.
77 * disassemble.c: Always return print_insn_alpha for the alpha.
80 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
82 * d10v-dis.c (dis_long): Handle unknown opcodes.
84 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
86 * d10v-opc.c: Changes to support signed and unsigned numbers.
87 All instructions with the same name that have long and short forms
88 now end in ".l" or ".s". Divs added.
89 * d10v-dis.c: Changes to support signed and unsigned numbers.
91 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
93 * d10v-dis.c: Change all functions to use info->print_address_func.
96 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
98 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
99 move ccr/sr insns more strict so that the disassembler only
100 selects them when the addressing mode is data register.
103 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
104 * d10v-opc.c (pre_defined_registers): Declare.
105 * d10v-dis.c (print_operand): Now uses pre_defined_registers
106 to pick a better name for the registers.
109 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
111 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
112 operands for fexpand and fpmerge. From Christian Kuehnke
113 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
115 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
117 * alpha-dis.c (print_insn_alpha): No longer the user-visible
118 print routine. Take new regnames and cpumask arguments.
119 Kill the environment variable nonsense.
120 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
121 (print_insn_alpha_vms): New function. Do VMS style regnames.
122 * disassemble.c (disassembler): Test bfd flavour to pick
123 between OSF and VMS routines. Default to OSF.
125 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
127 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
128 * configure: Rebuild.
129 * Makefile.in (install): Use @INSTALL_SHLIB@.
132 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
134 * configure: (bfd_d10v_arch) Add new case.
135 * configure.in: (bfd_d10v_arch) Add new case.
136 * d10v-dis.c: New file.
137 * d10v-opc.c: New file.
138 * disassemble.c (disassembler) Add entry for d10v.
141 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
143 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
144 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
146 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
148 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
149 distinguish between variants of the instruction set.
150 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
151 distinguish between variants of the instruction set.
153 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
155 * i386-dis.c (print_insn_i8086): New routine to disassemble using
156 the 8086 instruction set.
157 * i386-dis.c: General cleanups. Make most things static. Add
158 prototypes. Get rid of static variables aflags and dflags. Pass
159 them as args (to almost everything).
161 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
163 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
165 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
167 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
168 if the next arg is marked with SRC_IN_DST. Gross.
170 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
171 we're looking for and find EXR.
173 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
174 if we're looking for KBIT and we don't find it.
176 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
179 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
180 3bit immediate operands.
182 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
184 * Released binutils 2.7.
186 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
187 <kkaempf@progis.ac-net.de>.
189 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
191 * alpha-opc.c: Correct second case of "mov" to use OPRL.
193 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
195 * sparc-dis.c (print_insn_sparclite): New routine to print
196 sparclite instructions.
198 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
200 * m68k-opc.c (m68k_opcodes): Add coldfire support.
202 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
204 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
205 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
206 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
208 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
210 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
211 Use autoconf-set values.
212 (docdir, oldincludedir): Removed.
213 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
215 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
217 * alpha-opc.c: New file.
218 * alpha-opc.h: Remove.
219 * alpha-dis.c: Complete rewrite to use new opcode table.
220 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
221 * configure: Rebuild with autoconf 2.10.
222 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
223 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
225 (alpha-opc.o): New target.
227 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
229 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
230 Set imm_added_to_rs1 even if the source and destination register
233 * sparc-opc.c: Add some two operand forms of the wr instruction.
235 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
237 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
240 * disassemble.c (disassembler): Handle H8/S.
241 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
243 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
245 * sparc-opc.c: Add beq/teq as aliases for be/te.
247 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
248 <sergei@msil.sps.mot.com>.
250 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
252 * makefile.vms: New file.
254 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
256 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
258 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
261 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
263 * i386-dis.c (OP_OFF): Call append_prefix.
265 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
267 * ppc-opc.c (instruction encoding macros): Add explicit casts to
268 unsigned long to silence a warning from the Solaris PowerPC
271 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
273 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
275 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
277 * sparc-dis.c (X_IMM,X_SIMM): New macros.
279 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
280 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
281 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
282 cpush, cpusha, cpull sparclet insns.
284 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
286 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
288 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
290 * sparc-opc.c: Set F_FBR on floating point branch instructions.
291 Set F_FLOAT on other floating point instructions.
293 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
295 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
297 (powerpc_opcodes): Add 860/821 specific SPRs.
299 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
301 * configure.in: Permit --enable-shared to specify a list of
302 directories. Set and substitute BFD_PICLIST.
303 * configure: Rebuild.
304 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
305 uses. Set to @BFD_PICLIST@.
307 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
309 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
310 not "abs", which may be needed for the absolute in something
311 like btst #0,@10:8. Print L_3 immediates separately from other
312 immediates. Change ABSMOV reference to ABS8MEM.
314 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
316 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
317 (current_arch_mask): New static global.
318 (compute_arch_mask): New static function.
319 (print_insn_sparc): Delete sparc_v9_p. New static local
320 current_mach. Resort opcode table if current_mach changes.
321 Generalize "insn not supported" test.
322 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
323 Delete test for v9/!v9.
324 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
326 (brfc): Split into CBR and FBR for coprocessor/fp branches.
327 (brfcx): Renamed to FBRX.
328 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
329 coprocessor mnemonics are not supported on the sparclet).
330 (condf): Renamed to CONDF.
331 (SLCBCC2): Delete F_ALIAS flag.
333 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
335 * sparc-opc.c (sparc_opcodes): rd must be 0 for
336 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
338 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
340 * Makefile.in (config.status): Depend upon BFD VERSION file, so
341 that the shared library version number is set correctly.
343 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
345 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
346 Miles Bader <miles@gnu.ai.mit.edu>.
347 * configure: Rebuild.
349 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
351 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
354 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
356 * configure: Rebuild with autoconf 2.8.
358 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
360 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
361 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
363 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
365 * configure.in: Don't set SHLIB or SHLINK to an empty string,
366 since they appear as targets in Makefile.in.
367 * configure: Rebuild.
369 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
371 * mpw-make.sed: Edit out shared library support bits.
373 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
375 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
376 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
377 (sparc_opcodes): Add sparclet insns.
378 (sparclet_cpreg_table): New static local.
379 (sparc_{encode,decode}_sparclet_cpreg): New functions.
380 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
382 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
384 * i386-dis.c (index16): New static variable.
385 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
387 (OP_indirE): Return result of OP_E.
388 (OP_E): Check for 16 bit addressing mode, and disassemble
389 correctly. Optimised 32 bit case a little. Don't print
390 "(base,index,scale)" when sib specifies only an offset.
392 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
394 * configure.in: Set and substitute SHLIB_DEP.
395 * configure: Rebuild.
396 * Makefile.in (SHLIB_DEP): New variable.
397 (LIBIBERTY_LISTS, BFD_LIST): New variables.
398 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
399 COMMON_SHLIB, add them to piclist with appropriate modifications.
400 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
401 here: just use piclist.
403 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
405 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
406 (print_insn_sparc): Rewrite v9/not-v9 tests.
407 (compare_opcodes): Likewise.
408 * sparc-opc.c (MASK_<ARCH>): Define.
409 (v6,v7,v8,sparclite,v9,v9a): Redefine.
410 (sparclet,v6notv9): Define.
411 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
412 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
414 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
416 * configure.in: Call AC_PROG_CC before configure.host.
417 * configure: Rebuild.
419 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
421 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
423 * i386-dis.c (onebyte_has_modrm): New static array.
424 (twobyte_has_modrm): New static array.
425 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
427 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
429 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
432 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
434 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
437 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
439 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
440 m68010up, not just m68020up | cpu32.
442 * Makefile.in (SONAME): New variable.
443 ($(SHLINK)): Make a link to the transformed name, as well.
444 (stamp-tshlink): New target.
445 (install): Skip stamp-tshlink during install.
447 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
449 * configure.in: Call AC_ARG_PROGRAM.
450 * configure: Rebuild.
451 * Makefile.in (program_transform_name): New variable.
452 (install): Transform library name before installing it.
454 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
456 * i960-dis.c (mem): Add HX dcinva instruction.
458 Support for building as a shared library, based on patches from
459 Alan Modra <alan@spri.levels.unisa.edu.au>:
460 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
461 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
462 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
463 * configure: Rebuild.
464 * Makefile.in (ALLLIBS): New variable.
465 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
466 (COMMON_SHLIB, SHLINK): New variables.
467 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
468 (STAGESTUFF): Remove variable.
469 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
470 (stamp-piclist, piclist): New targets.
471 ($(SHLIB), $(SHLINK)): New targets.
472 ($(OFILES)): Depend upon stamp-picdir.
473 (disassemble.o): Build twice if PICFLAG is set.
474 (MOSTLYCLEAN): Add pic/*.o.
475 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
476 (distclean): Remove pic and stamp-picdir.
477 (install): Install shared libraries.
478 (stamp-picdir): New target.
480 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
482 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
483 Print unknown instruction as "unknown", rather than in hex.
485 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
487 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
489 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
491 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
493 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
495 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
496 when necessary. From Ulrich Drepper
497 <drepper@myware.rz.uni-karlsruhe.de>.
499 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
501 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
502 sparc_num_opcodes. Update architecture enum values.
503 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
504 (sparc_opcode_lookup_arch): New function.
505 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
506 (sparc_opcodes): Add v9a shutdown insn.
508 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
510 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
511 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
513 (print_insn_sparc64): Deleted.
514 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
517 * sparc-opc.c (architecture_pname): Add v9a.
519 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
521 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
522 incorrectly defined as 0x16 when it should be 0x15.
523 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
524 (alpha_insn_set): added cvtst and cvttq float ops. Also added
525 excb (exception barrier) which is defined in the Alpha
526 Architecture Handbook version 2.
527 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
528 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
529 disassembled as or, for example.
531 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
533 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
534 (_print_insn_mips): Change i from int to unsigned int.
536 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
538 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
539 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
541 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
543 * i386-dis.c: Added Pentium Pro instructions.
545 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
547 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
550 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
552 * sh-opc.h (sh_nibble_type): Added REG_B.
553 (sh_arg_type): Added A_REG_B.
554 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
556 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
558 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
560 * disassemble.c (disassembler): Use new bfd_big_endian macro.
562 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
564 * Makefile.in (distclean): Remove stamp-h. From Ronald
565 F. Guilmette <rfg@monkeys.com>.
567 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
569 From David Mosberger-Tang <davidm@azstarnet.com>:
570 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
573 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
575 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
576 (sh_table): Added many SH3 opcodes.
577 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
579 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
581 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
582 (subco,subco.): Mark this PPC, not PPCCOM.
584 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
586 * configure: Rebuild with autoconf 2.7.
588 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
590 * configure: Rebuild with autoconf 2.6.
592 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
594 * configure.in: Sort list of architectures. Accept but do nothing
595 for alliant, convex, pyramid, romp, and tahoe.
597 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
599 * a29k-dis.c (print_special): Change num to unsigned int.
601 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
603 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
606 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
608 * configure.in: Call AC_CHECK_PROG to find and cache AR.
609 * configure: Rebuilt.
611 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
613 * configure.in: Add case for bfd_i860_arch.
614 * configure: Rebuild.
616 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
618 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
619 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
620 (NEXTDOUBLE): Likewise.
621 (print_insn_m68k): Don't match fmoveml if there is more than one
622 register in the list.
623 (print_insn_arg): Handle a place of '8' for a type of 'L'.
625 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
627 * m68k-opc.c: Use #W rather than #w.
628 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
630 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
632 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
633 and likewise for all the dbxx opcodes.
635 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
637 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
639 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
641 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
642 the VR4100 specific instructions to the mips_opcodes structure.
644 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
646 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
647 ugly Metrowerks bug in CW6, is fixed in CW7.
649 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
651 * ppc-opc.c (whole file): Add flags for common/any support.
653 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
655 * Makefile.in (BISON): Remove macro.
656 (FLAGS_TO_PASS): Remove BISON.
658 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
660 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
662 * m68k-dis.c (print_insn_m68k): Recognize all two-word
663 instructions that take no args by looking at the match mask.
664 (print_insn_arg): Always print "%" before register names.
665 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
666 [case '_']: Don't print "@#" before address.
667 [case 'J']: Use "%s" as format string, not register name.
668 [case 'B']: Treat place == 'C' like 'l' and 'L'.
670 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
672 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
675 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
677 From David Mosberger-Tang <davidm@azstarnet.com>
679 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
680 (alpha_insn_set): added definitions for VAX floating point
681 instructions (Unix compilers don't generate these, but handcoded
682 assembly might still use them).
684 * alpha-dis.c (print_insn_alpha): added support for disassembling
685 the miscellaneous instructions in the Alpha instruction set.
687 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
689 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
690 no longer create sysdep.h, sed ppc-opc.c to work around a
691 serious Metrowerks C bug.
692 * mpw-make.in: Remove.
693 * mpw-make.sed: New file, used by mpw-configure to edit
694 Makefile.in into an MPW makefile.
696 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
698 * Makefile.in (maintainer-clean): New synonym for realclean.
700 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
702 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
703 which use '0', '1', and '2' instead. Specify the proper size for
704 a pmove immediate operand. Correct the pmovefd patterns to be
705 moves to a register, not from a register.
706 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
708 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
710 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
711 %psr, %wim, %tbr as F_NOTV9.
713 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
715 * Makefile.in (Makefile): Just rebuild Makefile when running
717 (config.h, stamp-h): New targets.
718 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
719 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
721 * configure: Rebuild.
723 * mips-opc.c: Change unaligned loads and stores with "t,A"
724 operands to use "t,A(b)".
726 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
728 * sh-dis.c (print_insn_shx): Add F_FR0 support.
730 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
732 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
733 until 3 instead of until 2.
735 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
737 * Makefile.in (ALL_CFLAGS): Define.
738 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
739 (MOSTLYCLEAN): Add config.log.
740 (distclean): Don't remove config.log.
741 * configure.in: Substitute HDEFINES.
742 * configure: Rebuild.
744 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
746 * sh-opc.h (sh_arg_type): Add F_FR0.
747 (sh_table, case fmac): Add F_FR0 as first argument.
749 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
751 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
753 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
755 * sparc-dis.c: Remove all references to NO_V9.
757 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
759 * aclocal.m4: Just include ../bfd/aclocal.m4.
760 * configure: Rebuild.
762 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
764 * sparc-dis.c (X_DISP19): Define.
765 (print_insn, case 'G'): Use it.
766 (print_insn, case 'L'): Sign extend displacement.
768 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
770 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
771 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
772 host_makefile_frag or frags.
773 * aclocal.m4: New file.
774 * configure: Rebuild.
775 * Makefile.in (INSTALL): Set to @INSTALL@.
776 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
777 (INSTALL_DATA): Set to @INSTALL_DATA@.
779 (AR_FLAGS): Set to rc rather than qc.
780 (CC): Define as @CC@.
781 (CFLAGS): Set to @CFLAGS@.
782 (@host_makefile_frag@): Remove.
783 (config.status): Remove dependency upon @frags@.
785 * configure.in: ../bfd/config.bfd now just sets shell variables.
786 Use them rather than looking through target Makefile fragments.
787 * configure: Rebuild.
789 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
791 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
793 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
795 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
796 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
799 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
800 (lookup_{name,value}): New functions.
801 (prefetch_table): New static local.
802 (sparc_{encode,decode}_prefetch): New functions.
803 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
805 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
807 * sh-opc.h: Add blank lines to improve readabililty of sh3e
810 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
812 * sh-dis.c: Correct comment on first line of file.
814 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
816 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
818 * sparc-opc.c (asi, membar): New static locals.
819 (sparc_{encode,decode}_{asi,membar}): New functions.
820 (sparc_opcodes, membar insn): Fix.
821 * sparc-dis.c (print_insn): Call sparc_decode_asi.
822 Support decoding of membar masks.
825 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
827 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
829 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
831 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
832 and likewise for the other branches. Add bhs as an alias for bcc,
833 and likewise for the size variants. Add dbhs as an alias for
836 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
838 * sh-opc.h (FP sts instructions): Update to match reality.
840 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
842 * m68k-dis.c: (fpcr_names): Add % before all register names.
843 (reg_names): Likewise.
844 (print_insn_arg): Don't explicitly print % before register names.
845 Add % before register names in static array names. In case 'r',
846 print data registers as `@(Dn)', not `Dn@'. When printing a
847 memory address, don't print @# before it.
848 (print_indexed): Change base_disp and outer_disp from int to
849 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
850 syntax. Sign extend 8 byte displacement correctly.
851 (print_base): Print using MIT syntax. Print zpc when appropriate.
852 Change parameter disp from int to bfd_vma.
854 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
857 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
859 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
860 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
861 * sh-opc.h (sh_arg_type): Add new operand types.
862 (sh_table): Add new opcodes from SH3E Floating Point ISA.
864 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
866 * Makefile.in (distclean): Remove generated file config.h.
868 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
870 * Makefile.in (distclean): Remove generated file config.h.
872 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
874 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
876 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
878 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
879 rather than numopcodes. Use m68k_opcodes rather than removed
880 opcode function. Don't check F_ALIAS.
881 (print_insn_arg): Change first parameter to be const char *.
882 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
883 (m68k-opc.o): New target.
884 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
885 * configure: Rebuild.
887 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
889 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
890 (opcode_bits, opcode_hash_table): New variables.
891 (opcodes_initialized): Renamed from opcodes_sorted.
892 (build_hash_table): New function.
893 (is_delayed_branch): Use hash table.
894 (print_insn): Renamed from print_insn_sparc, made static.
895 Build and use hash table. If !sparc64, ignore sparc64 insns,
896 and vice-versa if sparc64.
897 (print_insn_sparc, print_insn_sparc64): New functions.
898 (compare_opcodes): Move sparc64 opcodes to end.
899 Print commutative insns with constant second.
900 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
902 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
904 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
905 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
906 avoids printing a delay slot in a delay slot.
907 * sh-opc.h (sh_table): Fully bracket last entry.
909 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
911 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
913 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
915 * configure.in: Get host_makefile_frag from ${srcdir}.
917 * configure.in: Autoconfiscated. Check for string[s].h. Create
918 config.h from config.in. Don't set up sysdep.h link.
919 * sysdep.h: New file.
920 * configure, config.in: New files, generated from configure.in.
921 * Makefile.in: Updated to be processed autoconf-style.
922 (distclean): Keep sysdep.h. Remove config.log and config.cache.
923 (Makefile): Depend on config.status.
924 (config.status): New rule.
925 * configure.bat: Update Makefile substitutions.
927 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
929 * mips-opc.c (L1): Define.
930 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
931 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
934 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
936 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
937 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
938 have multiple add units but only a single logical unit.
940 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
941 shifted by 18, without any insertion or extraction function.
942 (insert_cr, extract_cr): Remove.
945 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
947 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
950 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
952 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
955 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
957 * mpw-config.in: Add sh and i386 configs, remove sparc config.
958 * sh-opc.h: Add copyright.
960 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
962 * Makefile.in (crunch-m68k): Delete extra target accidentally
963 checked in a while ago.
965 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
967 * sh-opc.h (sh_table): Add SH3 support.
969 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
971 * sh-opc.h: Added bsrf and braf.
973 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
975 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
976 bogus [ls]fm{ea,fd} patterns.
978 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
979 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
980 initialize it from memory. Make function static.
981 (print_insn_{big,little}_arm): New functions.
982 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
983 the correct endianness.
986 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
988 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
989 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
992 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
994 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
997 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
999 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1000 17th, so that it builds again using GCC as the compiler.
1002 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1004 * mips-dis.c (print_insn_little_mips): Cast return value from
1005 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1006 expects an unsigned long, and that might be fewer words of
1007 argument storage (e.g., if bfd_vma is long long on a 32-bit
1009 (print_insn_big_mips): Likewise with bfd_getb32 value.
1010 (_print_insn_mips): Now static.
1012 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1014 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1015 gcc memory hog problem with initializer is fixed.
1018 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1020 * arc-opc.c (NULL): Define.
1021 (arc_operands, insn fields u,s): Delete.
1022 (arc_operands, insn fields a,b,c): Mark as signed.
1023 (arc_opcodes): No longer const, links computed at run-time.
1024 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1025 suffixes that affect the insn code.
1026 (arc_opcodes): Resort table to macros are first.
1027 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1028 (arc_opcodes, st [b] entry): Likewise.
1029 (arc_opcodes, st [b,d] entry): Fix mask, value.
1030 (arc_reg_names): Add entries for r29, r30, r31, r60.
1031 (opcode_map, icode_map): New static globals.
1032 (arc_opcode_init_tables): Initialize them.
1033 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1034 (insert_shimmoffset): Signal error if register present.
1036 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1039 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1041 Merge in support for Mac MPW as a host.
1042 (Old change descriptions retained for informational value.)
1044 * mpw-config.in (archname): Compute from the config.
1045 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1047 * mpw-config.in (target_arch): Compute from canonical target.
1048 (m68k, mips, powerpc, sparc): Add architectures.
1049 * mpw-make.in (disassemble.c.o): Add.
1050 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1052 * mpw-config.in (BFD_MACHINES): Set to a default value.
1053 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1055 * mpw-make.in (CSEARCH): Add extra-include to search path.
1057 * mpw-config.in (varargs.h): Don't create.
1058 (sysdep.h): Create using forward-include.
1059 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1061 * mpw-config.in: New file, MPW version of configure.in.
1062 * mpw-make.in: New file, MPW version of Makefile.in.
1065 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1067 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1068 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1069 (print_insn_*): Pass bfd mach number, not opcode version.
1070 * arc-opc.c (arc_get_opcode_mach): New function.
1073 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1075 * alpha-dis.c (print_insn_alpha): Put empty statement after
1078 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1080 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1081 (low_sign_extend): Likewise.
1082 (get_field): Delete unused function.
1083 (set_field, deposit_14, deposit_21): Likewise.
1085 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1087 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1090 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1092 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1094 * alpha-opc.h (OSF_ASMCODE): define
1095 print pal-code names as defined in App C of the
1096 Alpha Architecture Reference Manual
1098 * alpha-dis.c: cleaned up output
1099 print stylized code forms as defined in App A.4.3 of the
1100 Alpha Architecture Reference Manual
1102 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1104 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1106 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1109 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1111 * m68k-dis.c (opcode): New function. Returns address of opcode
1112 table entry given index, even if the opcode table was split to
1113 work around gcc bugs.
1114 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1116 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1117 (reg_names): Now const.
1118 (print_insn_arg): Arrays cacheFieldName and names now const.
1119 (print_indexed): Array scales now const.
1122 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1124 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1125 (print_insn_arc_{host,graphics,audio}): Likewise.
1126 (print_insn): Add prototype.
1127 (arc_get_disassembler): New arg `big_p'. Return little or big
1128 print fn accordingly.
1129 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1130 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1131 (arc_opval_supported): Likewise.
1132 * disassemble.c (disassembler): Pass big endian flag to
1133 arc_get_disassembler.
1136 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1138 * ppc-opc.c: Sort recently added instructions by minor opcode
1139 number within major opcode number.
1141 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1143 * hppa-dis.c: Include libhppa.h.
1145 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1147 * mips-opc.c: Change dli to use M_DLI, and add dla.
1149 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1151 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1154 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1156 * arc-dis.c (arc_get_disassembler): Change argument to int,
1157 one of bfd_mach_arc_xxx. All callers updated.
1160 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1162 * mips-opc.c: Add r4650 mul instruction.
1164 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1166 * mips-opc.c: Add uld and usd macros for unaligned double load and
1169 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1171 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1172 mfdcr, mtdcr, icbt, iccci.
1175 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1177 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1178 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1179 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1180 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1181 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1182 (insert_absaddr): New function.
1184 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1186 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1187 New argument `cpu', pass it to arc_opcode_init_tables.
1188 Document byte order dependencies. Ignore unsupported insns.
1189 (arc_get_disassembler): New function.
1190 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1191 print_insn_arc_audio): New functions.
1192 * arc-opc.c (MULTSHIFT operand): Delete.
1193 (UNSIGNED, SATURATION): New operands.
1194 (mac, mul, mul64, mulu64): New insns.
1195 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1196 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1197 (host,graphics,audio extended and auxiliary regs): Define.
1198 (ss, sc, mh, ml): New suffixes.
1199 (arc_opcode_supported, arc_opval_supported): New functions.
1200 (insert_multshift, extract_multshift): Deleted.
1201 * disassemble.c (disassembler, case bfd_arch_arc): Call
1202 arc_get_disassembler to get disassembler routine.
1205 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1207 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1208 signed char fields to shorts, more portable.
1210 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1212 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1213 char fields as signed chars, since they may have negative values.
1215 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1217 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1218 (mycroft@netbsd.org).
1220 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1222 From "Logg, Ed" <elogg@ea.com>:
1223 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1224 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1227 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1229 * ppc-opc.c: Changes based on patch from David Edelsohn
1230 <edelsohn@mhpcc.edu>.
1231 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1234 (insert_tbr): New static function.
1235 (extract_tbr): New static function.
1236 (XFXFXM_MASK, XFXM): Define.
1237 (XSPRBAT_MASK, XSPRG_MASK): Define.
1238 (powerpc_opcodes): Add instructions to access special registers by
1239 name. Add mtcr and mftbu.
1241 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1243 * mips-opc.c (P3): Define.
1244 (mips_opcodes): Add mad and madu.
1246 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1248 * configure.in: Add W65 support.
1249 * disassemble.c: Likewise.
1250 * w65-opc.h, w65-dis.c: New files.
1252 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1254 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1258 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1260 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1262 * arc-opc.c (extract_reladdr): New function.
1263 (insert_reladdr): Store address right-shifted by 2.
1266 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1268 * mips-opc.c: Add dli as a synonym for li.
1271 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1273 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1275 (extraction fns): Insn argument now array of two words. Return pointer
1276 to value's table entry. All uses changed.
1277 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1278 (insert_multshift, extract_multshift): New fns.
1279 (arc_operands): Add support for cache bypass suffix. Add support for
1280 predefined aux regs. Modifier bits moved to flags field.
1281 (arc_opcodes): Likewise.
1282 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1283 New insn rlc. Update to syntax in programmer's manual.
1284 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1285 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1287 (arc_opcode_init_tables): New argument to indicate cpu type.
1288 (insert_reg): Handle predefined aux regs.
1289 (extract_reg): Likewise.
1290 (lookup_register): New fn.
1291 * arc-dis.c (arc_condition_codes): Deleted.
1292 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1293 Clean up modifier handling. Handle predefined aux regs.
1296 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1298 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1299 print something for reserved opcode values, even if it won't
1302 * mips-dis.c (_print_insn_mips): When initializing, shift right
1303 and mask, to avoid sign extension problems on the Alpha.
1305 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1309 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1311 * configure.in: Add ARC support.
1312 * disassemble.c: Likewise.
1313 * arc-dis.c, arc-opc.c: New files.
1316 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1318 * sh-opc.h (mov.l gbr): Get direction right.
1319 * sh-dis.c (print_insn_shx): New function.
1320 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1321 print opcodes with right byte order.
1323 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1325 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1326 to avoid conflicts with getopt.
1328 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1330 * hppa-dis.c (print_insn_hppa): Read the instruction using
1331 bfd_getb32, so that it works on a little endian or 64 bit host.
1332 Remove unused local variable op.
1334 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1336 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1337 addu does not work correctly if -mips3.
1339 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1341 * a29k-dis.c (print_special): Add special register names defined
1342 on 29030, 29040 and 29050.
1343 (print_insn): Handle new operand type 'I'.
1345 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1347 * Makefile.in (INSTALL): Use top level install.sh script.
1349 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1351 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1352 that it works on a little endian host.
1354 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1356 * configure.in: Use ${config_shell} when running config.bfd.
1358 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1360 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1362 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1364 * a29k-dis.c (print_insn): Print the opcode.
1366 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1368 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1370 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1372 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1374 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1376 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1377 which store a value into memory.
1379 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1381 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1382 * arm-dis.c, arm-opc.h: New files.
1384 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1386 * Makefile.in (ns32k-dis.o): Add dependency.
1387 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1388 string, not as array of chars.
1390 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1392 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1394 * sparc-opc.c: Added sparclite extended FP operations, and
1395 versions of v9 impdep* instructions permitting specification of
1398 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1400 * i960-dis.c (reg_names): Now const.
1401 (struct sparse_tabent): New type, copied from array type in mem
1403 (ctrl): Local static array ctrl_tab now const.
1404 (cobr): Local static array cobr_tab now const.
1405 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1406 static variable mem_tab no longer explicitly initialized. Changed
1407 mem_init to const array of struct sparse_tabent.
1408 (reg): Local static variable reg_tab no longer explicitly
1409 initialized. Changed reg_init to const array of struct
1411 (ea): Local static array scale_tab now const.
1413 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1416 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1418 * configure.bat: the disassember needs to be enabled for
1419 "objdump -d" to work in djgpp.
1421 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1423 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1424 (invalid_float): Enabled general version, doesn't require running
1425 on ns32k host. Changed to take char* argument, and test for
1426 explicitly specified sizes, instead of using sizeof() on host CPU
1428 (INVALID_FLOAT): Cast first argument.
1429 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1430 list_P032, list_M032): Now const.
1431 (optlist, list_search): Made appropriate arguments now point to
1433 (print_insn_arg): Changed static array of one-character-string
1434 pointers into a static const array of characters; fixed sprintf
1435 statement accordingly.
1437 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1439 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1440 from distribution. A ns32k-dis.c from a previous distribution has
1441 been brought up to date and supports the new interface.
1443 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1445 * configure.in: add bfd_ns32k_arch target support.
1447 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1448 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1450 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1452 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1455 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1457 * h8300-dis.c, mips-dis.c: Don't use true and false.
1459 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1461 * configure.in: Change --with-targets to --enable-targets.
1463 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1465 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1466 opcodes to the first instruction with that opcode, to speed
1467 disassembly of large files. From ralphc@pyramid.com (Ralph
1470 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1472 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1474 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1476 * configure.bat: update to latest makefile.in
1478 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1480 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1481 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1482 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1483 slot insn is in a delay slot.
1484 * z8k-opc.h: (resflg): Fix patterns.
1485 * h8500-opc.h Fix CR insn patterns.
1487 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1489 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1490 "cmpl" before POWER versions, so that gas -many uses them.
1492 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1494 * disassemble.c: New file.
1495 * Makefile.in (OFILES): Add disassemble.o.
1496 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1497 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1498 binutils/configure.in.
1500 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1501 opcode being examined.
1503 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1505 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1506 (insert_ral, insert_ram, insert_ras): New functions.
1507 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1508 RAS for store with update.
1510 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1512 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1513 (edelsohn@npac.syr.edu).
1515 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1517 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1520 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1522 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1524 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1526 * ppc-opc.c (powerpc_operands): The signedp field has been
1527 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1528 instead. Add new operand SISIGNOPT.
1529 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1530 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1531 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1534 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1536 * i386-dis.c (struct private): Renamed to dis_private. `private'
1537 is a reserved word for dynix cc.
1539 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1541 * configure.in: Change error message to refer to bfd/config.bfd
1542 rather than bfd/configure.in.
1544 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1546 * ppc-opc.c: Define POWER2 as short alias flag.
1547 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1550 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1552 * i960-dis.c (print_insn_i960): Don't read a second word for
1553 opcodes 0, 1, 2 and 3.
1555 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1557 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1559 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1561 * m68881-ext.c: Removed; no longer used.
1562 * Makefile.in: Changed accordingly.
1564 * m68k-dis.c (ext_format_68881): Don't declare.
1565 (print_insn_m68k): If an instruction uses place 'i', it uses at
1566 least four fixed bytes.
1567 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1568 extended float, convert to double using floatformat_to_double, not
1569 ieee_extended_to_double, and fetch the data before converting it.
1571 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1573 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1574 davidj@ICSI.Berkeley.EDU (David Johnson).
1576 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1578 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1579 PowerPC uses bdnz[l][a].
1581 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1583 * dis-buf.c, i386-dis.c: Include sysdep.h.
1585 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1587 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1589 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1590 by Motorola PowerPC 601 with PPC_OPCODE_601.
1591 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1592 Disassemble Motorola PowerPC 601 instructions as well as normal
1593 PowerPC instructions.
1595 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1597 * i960-dis.c (reg, mem): Just use a static array instead of
1600 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1602 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1603 condition name index if this is for a negated condition.
1605 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1606 Floating point format for 'H' operand is backwards from normal
1607 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1608 operands (fmpyadd and fmpysub), handle bizarre register
1609 translation correctly for single precision format.
1611 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1612 or 'I' operands if the next format specifier is 'M' (fcmp
1613 condition completer).
1615 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1617 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1618 single number giving a bitmask for the MB and ME fields of an M
1619 form instruction. Change NB to accept 32, and turn it into 0;
1620 also turn 0 into 32 when disassembling. Seperated SH from NB.
1621 (insert_mbe, extract_mbe): New functions.
1622 (insert_nb, extract_nb): New functions.
1623 (SC_MASK): Mask out SA and LK bits.
1624 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1625 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1626 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1627 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1628 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1629 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1630 (powerpc_macros): Define table of macro definitions.
1631 (powerpc_num_macros): Define.
1633 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1634 if PPC_OPERAND_NEXT is set.
1636 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1638 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1639 char. Retrieve contents using bfd_getl32 instead of shifting.
1641 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1643 * ppc-opc.c: New file. Opcode table for PowerPC, including
1644 opcodes for POWER (RS/6000).
1645 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1646 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1647 (CFILES): Add ppc-dis.c.
1648 (ppc-dis.o, ppc-opc.o): New targets.
1649 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1651 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1653 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1654 No space before 'u', 'f', or 'N'.
1656 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1658 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1659 farther than we should.
1661 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1663 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1665 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1667 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1669 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1670 needs it, to prevent reading past the end of a section.
1672 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1674 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1675 Removed t,A case for la; always use t,A(b) case.
1677 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1679 From Ted Lemen <mellon@pepper.ncd.com>
1680 * mips-dis.c (print_insn_arg): Handle 'k'.
1681 * mips-opc.c: Make cache use k, not t.
1683 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1685 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1686 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1687 FLOAT_FORMAT_CODE to put out floating point register names.
1689 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1691 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1693 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1695 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1697 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1699 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1700 larger than 32. Moved dsxx32 variants first for disassembler.
1702 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1704 * z8kgen.c, z8k-opc.h: Add full lda information.
1706 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1708 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1709 movb instructions. Any necessary space will be emitted by
1710 the code to handle nullification completers.
1712 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1714 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1716 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1718 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1719 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1721 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1723 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1725 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1727 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1728 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1730 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1732 * m88k-dis.c (m88kdis): comment change. Remove space after
1734 (printop): handle new arg types DEC and XREG for m88110.
1736 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1738 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1739 type for absolute branch addresses. Delete special
1740 "ble" and "be" code in 'W' operand code.
1742 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1744 * mips-opc.c: Set hazard information correctly for branch
1745 likely instructions.
1747 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1749 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1750 info->fprintf_func for printing and info->print_address_func for
1753 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1755 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1757 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1759 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1760 Corrected second case of "b" for disassembler.
1762 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1764 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1765 to BFD swapping routines to correspond to BFD name changes.
1767 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1769 * mips-opc.c: Change div machine instruction to be z,s,t rather
1770 than s,t. Change div macro to be d,v,t rather than d,s,t.
1771 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1772 rem and remu which generates only the corresponding div
1773 instruction. This is for compatibility with the MIPS assembler,
1774 which only generates the simple machine instruction when an
1775 explicit destination of $0 is used.
1776 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1778 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1780 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1781 WR_31 hazard for bal, bgezal, bltzal.
1783 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1785 * hppa-dis.c (print_insn_hppa): Use print function
1786 from within the disassemble_info, not fprintf_filtered.
1788 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1790 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1791 Law, law@cs.utah.edu.)
1793 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1795 * mips-opc.c ("absu"): Removed.
1798 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1800 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1801 Changed hazard information to distinguish between memory load
1802 delays and coprocessor load delays.
1804 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1806 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1808 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1810 * configure.in: Don't pass cpu to config.bfd.
1812 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1814 * m88k-dis.c (m88kdis): Make class unsigned.
1816 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1818 * alpha-dis.c (print_insn_alpha): One branch format case was
1819 missing the instruction name.
1821 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1823 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1824 Add the arch-specific auxiliary files.
1825 (OFILES): Remove the arch-specific auxiliary files
1826 and use BFD_MACHINES instead of DIS_LIBS.
1827 * configure.in: Set BFD_MACHINES based on --with-targets option.
1829 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1831 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1834 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1836 * sparc-opc.c: Change CONST to const to deal with gcc
1837 -Dconst=__const -traditional.
1839 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1841 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1842 coprocessor instructions out of #if 0, and made them use new
1845 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1847 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1849 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1851 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1852 instruction, for use by the disassembler.
1854 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1855 hand-coded sign extensions that depended on 32-bit host ints.
1856 FIXME, we still depend on big-endian host bitfield ordering.
1857 (sparc_print_insn): Set the insn_info_valid field, and the
1858 other fields that describe the instruction being printed.
1860 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1862 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1863 `jmp' instead of just one of them.
1865 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1867 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1868 (fput_fp_reg_r): Renamed from fput_reg_r.
1869 (fput_fp_reg): New function.
1870 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1872 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1874 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1876 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1878 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1880 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1881 don't output a space.
1883 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1885 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1887 * mips-opc.c: New file, containing opcode table from
1888 ../include/opcode/mips.h.
1889 * Makefile.in: Add it.
1891 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1893 * m88k-dis.c: New file, moved in from gdb and changed to use the
1894 new dis-asm.h disassembler interface.
1895 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1896 (m88k-dis.o): New target.
1898 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1900 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1901 argument string const char * to correspond to opcode/mips.h.
1903 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1905 * mips-dis.c: Updated to account for name changes in new version
1907 * Makefile.in: Added header file dependencies.
1909 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1911 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1913 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1915 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1916 extend, rather than shifts.
1918 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1920 * Makefile.in: Undo 15 June change.
1922 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1924 * m68k-dis.c (print_insn_arg): Change return value to byte count
1926 * m68k-dis.c: Re-write to detect invalid operands before
1927 printing anything, so we can handle this the same way we
1928 handle invalid opcodes.
1930 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1932 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1934 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1936 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1939 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1941 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1943 * configure.in: Do make sysdep.h link.
1944 * Makefile.in: Search ../include. Don't search ../bfd.
1946 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1948 Changes from Jeff Law, law@cs.utah.edu:
1949 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1950 Do not print a space before the completers specified by
1953 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1955 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1956 defined, since gdb has been fixed.
1958 Changes from Jeff Law, law@cs.utah.edu:
1959 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1960 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1961 be a *disassemble_info, not a *FILE.
1962 * hppa-dis.c: Support 'd', '!', and 'a'.
1963 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1964 * hppa-dis.c: Delete cases which are no longer needed.
1966 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1968 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1970 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1972 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1975 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1977 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1978 * configure.in: No longer need to configure to get sysdep.h.
1980 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1982 * Patches from Jeffrey Law <law@cs.utah.edu>.
1983 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1984 templates for 1.1 FP computational instructions.
1986 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1988 * h8500-dis.c (print_insn_h8500): Address argument is type
1990 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1993 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1994 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1996 * sparc-dis.c (compare_opcodes): Move static declaration to
1999 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2001 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2002 instruction, remove unimp hack from 'l' argument.
2004 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2006 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2009 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2011 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2012 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2015 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2017 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2018 arrays of string pointers to 2-d arrays of chars, to save
2021 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2023 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2024 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2026 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2028 * hppa-dis.c: New file from Utah, adapted to new disassembler
2030 * Makefile.in: Include it.
2032 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2034 * sh-dis.c, sh-opc.h: New files.
2036 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2038 * alpha-dis.c, alpha-opc.h: New files.
2040 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2042 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2045 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2047 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2049 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2051 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2054 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2056 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2057 and double percent signs a few places.
2059 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2061 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2062 Use info->print_address_func not print_address.
2064 * dis-buf.c (generic_print_address): New function.
2066 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2068 * Makefile.in: Add sparc-dis.c.
2069 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2071 Add `add' instruction to the set that get checked
2072 for a preceding `sethi' in order to print an absolute address.
2073 * (print_insn): Disassembly prefers real instructions.
2074 (is_delayed_branch): Speed up.
2075 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2076 Still missing some float ops, and needs testing.
2077 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2078 F_ALIAS. Use printf, not fprintf, when not passing a file
2080 (compare_opcodes): Check that identical instructions have
2081 identical opcodes, complain otherwise.
2084 * Include reg_names.
2086 Use dis-asm.h/read_memory_func interface.
2088 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2090 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2091 deliberately return non-zero to setjmp from longjmp. Otherwise
2092 this code fails to compile.
2094 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2096 * m68k-dis.c: Fix prototype for fetch_arg().
2098 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2100 * dis-buf.c: New file, for new read_memory_func interface.
2101 Makefile.in (OFILES): Include it.
2102 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2103 Use new read_memory_func interface.
2105 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2107 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2108 * h8500-opc.h: Fix couple of opcodes.
2110 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2112 * Makefile.in: add dvi & installcheck targets
2114 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2116 * Makefile.in: Update for h8500-dis.c.
2118 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2120 * h8500-dis.c, h8500-opc.h: New files
2122 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2124 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2125 ../include/dis-asm.h.
2126 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2127 and ../gdb/m68k-pinsn.c).
2128 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2129 and ../gdb/i386-pinsn.c).
2130 * m68881-ext.c: New file. Moved definition of
2131 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2132 * Makefile.in: Adjust for new files.
2133 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2134 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2135 can be dis-assembled.
2137 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2139 * mips-dis.c (print_insn_arg): Now returns void.
2141 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2143 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2144 files that use the macros.
2146 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2148 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2149 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2150 (CFILES): Added mips-dis.c.
2152 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2154 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2155 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2157 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2159 * Makefile.in: Improve *clean rules.
2160 * configure.in: Allow a default host.
2162 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2164 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2165 files include other sysdep files
2167 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2169 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2171 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2173 * configure.in: For host support, use ../bfd/configure.host
2174 so it stays in sync with the ../bfd/hosts database.
2176 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2178 * configure.in: use cpu-vendor-os triple instead of nested cases
2180 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2182 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2183 *always* the wrong one.
2185 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2187 * z8kgen.c: added copyright info
2189 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2191 * z8k-dis.c (unparse_instr): prettier tabs
2192 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2194 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2196 * configure.in: Add ncr* configuration.
2197 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2198 picayune ANSI compilers happy.
2200 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2202 * configure.in (i386): Make i386 and i486 synonymous for now.
2203 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2205 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2207 * Makefile.in (install): Fix typo.
2209 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2211 * Makefile.in (make): Remove obsolete crud.
2212 (sparc-opc.o): Avoid Sun Make VPATH bug.
2214 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2216 * Makefile.in: since there are no SUBDIRS, remove rule and
2217 references of subdir_do.
2219 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2221 * Makefile.in (install): Get the library name right here too.
2222 Don't install bfd.h, since it's unrelated to this library. No
2223 subdirs to recurse into, either.
2224 (CFILES): The source file has a .c suffix, not .o.
2226 * sparc-opc.c: New file, moved from BFD.
2227 * Makefile.in (OFILES): Build it.
2229 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2231 * z8k-dis.c: fixed forward refferences of some declarations.
2233 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2235 * Makefile.in: get the name of the library right
2237 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2239 * z8k-dis.c: knows how to disassemble z8k stuff
2240 * z8k-opc.h: new file full of z8000 opcodes
2244 version-control: never
projects / deliverable / binutils-gdb.git / blob