1 2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
3 * s390-opc.c: Add new instruction types marking register pair
5 * s390-opc.txt: Match instructions having register pair operands
6 to the new instruction types.
8 2011-05-19 Nick Clifton <nickc@redhat.com>
10 * v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
13 2011-05-10 Quentin Neill <quentin.neill@amd.com>
15 * i386-gen.c (cpu_flag_init): Add new CPU_BDVER2_FLAGS.
16 * i386-init.h: Regenerated.
18 2011-04-27 Nick Clifton <nickc@redhat.com>
20 * po/da.po: Updated Danish translation.
22 2011-04-26 Anton Blanchard <anton@samba.org>
24 * ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.
26 2011-04-21 DJ Delorie <dj@redhat.com>
28 * rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs.
29 * rx-decode.c: Regenerate.
31 2011-04-20 H.J. Lu <hongjiu.lu@intel.com>
33 * i386-init.h: Regenerated.
35 2011-04-19 Quentin Neill <quentin.neill@amd.com>
37 * i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits
40 2011-04-13 Nick Clifton <nickc@redhat.com>
42 * v850-dis.c (disassemble): Always print a closing square brace if
43 an opening square brace was printed.
45 2011-04-12 Nick Clifton <nickc@redhat.com>
48 * arm-dis.c (thumb32_opcodes): Add %L suffix to LDRD and STRD insn
50 (print_insn_thumb32): Handle %L.
52 2011-04-11 Julian Brown <julian@codesourcery.com>
54 * arm-dis.c (psr_name): Fix typo for BASEPRI_MAX.
55 (print_insn_thumb32): Add APSR bitmask support.
57 2011-04-07 Paul Carroll<pcarroll@codesourcery.com>
59 * arm-dis.c (print_insn): init vars moved into private_data structure.
61 2011-03-24 Mike Frysinger <vapier@gentoo.org>
63 * bfin-dis.c (decode_dsp32mac_0): Move MM zeroing down to MAC0 logic.
65 2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
67 * avr-dis.c (avr_operand): Add opcode_str parameter. Check for
68 post-increment to support LPM Z+ instruction. Add support for 'E'
69 constraint for DES instruction.
70 (print_insn_avr): Adjust calls to avr_operand. Rename variable.
72 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
74 * arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.
76 2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
78 * arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
79 Use branch types instead.
80 (print_insn): Likewise.
82 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
84 * mips-opc.c (mips_builtin_opcodes): Correct register use
85 annotation of "alnv.ps".
87 2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
89 * mips-opc.c (mips_builtin_opcodes): Add "pref" macro.
91 2011-02-22 Mike Frysinger <vapier@gentoo.org>
93 * bfin-dis.c (OUTS): Remove p NULL check and txt NUL check.
95 2011-02-22 Mike Frysinger <vapier@gentoo.org>
97 * bfin-dis.c (print_insn_bfin): Change outf->fprintf_func to OUTS.
99 2011-02-19 Mike Frysinger <vapier@gentoo.org>
101 * bfin-dis.c (saved_state): Mark static. Change a[01]x to ax[] and
102 a[01]w to aw[]. Delete ac0, ac0_copy, ac1, an, aq, av0, av0s, av1,
103 av1s, az, cc, v, v_copy, vs, rnd_mod, v_internal, pc, ticks, insts,
104 exception, end_of_registers, msize, memory, bfd_mach.
105 (CCREG, PCREG, A0XREG, A0WREG, A1XREG, A1WREG, LC0REG, LT0REG,
106 LB0REG, LC1REG, LT1REG, LB1REG): Delete
107 (AXREG, AWREG, LCREG, LTREG, LBREG): Define.
108 (get_allreg): Change to new defines. Fallback to abort().
110 2011-02-14 Mike Frysinger <vapier@gentoo.org>
112 * bfin-dis.c: Add whitespace/parenthesis where needed.
114 2011-02-14 Mike Frysinger <vapier@gentoo.org>
116 * bfin-dis.c (decode_LoopSetup_0): Return when reg is greater
119 2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
121 * configure: Regenerate.
123 2011-02-13 Mike Frysinger <vapier@gentoo.org>
125 * bfin-dis.c (decode_dsp32alu_0): Fix typo with A1 reg.
127 2011-02-13 Mike Frysinger <vapier@gentoo.org>
129 * bfin-dis.c (decode_dsp32mult_0): Add 1 to dst for mac1. Output
130 dregs only when P is set, and dregs_lo otherwise.
132 2011-02-13 Mike Frysinger <vapier@gentoo.org>
134 * bfin-dis.c (decode_dsp32alu_0): Delete BYTEOP2M code.
136 2011-02-12 Mike Frysinger <vapier@gentoo.org>
138 * bfin-dis.c (decode_pseudoDEBUG_0): Add space after PRNT.
140 2011-02-12 Mike Frysinger <vapier@gentoo.org>
142 * bfin-dis.c (machine_registers): Delete REG_GP.
143 (reg_names): Delete "GP".
144 (decode_allregs): Change REG_GP to REG_LASTREG.
146 2011-02-12 Mike Frysinger <vapier@gentoo.org>
148 * bfin-dis.c (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2,
151 2011-02-11 Mike Frysinger <vapier@gentoo.org>
153 * bfin-dis.c (reg_names): Add const.
154 (decode_dregs_lo, decode_dregs_hi, decode_dregs, decode_dregs_byte,
155 decode_pregs, decode_iregs, decode_mregs, decode_dpregs, decode_gregs,
156 decode_regs, decode_regs_lo, decode_regs_hi, decode_statbits,
157 decode_counters, decode_allregs): Likewise.
159 2011-02-09 Michael Snyder <msnyder@vmware.com>
161 * i386-dis.c (OP_J): Parenthesize expression to prevent
163 (print_insn): Fix indentation off-by-one.
165 2011-02-01 Nick Clifton <nickc@redhat.com>
167 * po/da.po: Updated Danish translation.
169 2011-01-21 Dave Murphy <davem@devkitpro.org>
171 * ppc-opc.c (NON32, NO371): Remove PPC_OPCODE_PPCPS.
173 2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
175 * i386-dis.c (sIbT): New.
176 (b_T_mode): Likewise.
177 (dis386): Replace sIb with sIbT on "pushT".
178 (x86_64_table): Replace sIb with Ib on "aam" and "aad".
179 (OP_sI): Handle b_T_mode. Properly sign-extend byte.
181 2011-01-18 Jan Kratochvil <jan.kratochvil@redhat.com>
183 * i386-init.h: Regenerated.
184 * i386-tbl.h: Regenerated
186 2011-01-17 Quentin Neill <quentin.neill@amd.com>
188 * i386-dis.c (REG_XOP_TBM_01): New.
189 (REG_XOP_TBM_02): New.
190 (reg_table): Add REG_XOP_TBM_01 and REG_XOP_TBM_02 tables.
191 (xop_table): Redirect to REG_XOP_TBM_01 and REG_XOP_TBM_02
192 entries, and add bextr instruction.
194 * i386-gen.c (cpu_flag_init): Add CPU_TBM_FLAGS, CpuTBM.
195 (cpu_flags): Add CpuTBM.
197 * i386-opc.h (CpuTBM) New.
198 (i386_cpu_flags): Add bit cputbm.
200 * i386-opc.tbl: Add bextr, blcfill, blci, blcic, blcmsk,
201 blcs, blsfill, blsic, t1mskc, and tzmsk.
203 2011-01-12 DJ Delorie <dj@redhat.com>
205 * rx-dis.c (print_insn_rx): Support RX_Operand_TwoReg.
207 2011-01-11 Mingjie Xing <mingjie.xing@gmail.com>
209 * mips-dis.c (print_insn_args): Adjust the value to print the real
210 offset for "+c" argument.
212 2011-01-10 Nick Clifton <nickc@redhat.com>
214 * po/da.po: Updated Danish translation.
216 2011-01-05 Nathan Sidwell <nathan@codesourcery.com>
218 * arm-dis.c (thumb32_opcodes): BLX must have bit zero clear.
220 2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
222 * i386-dis.c (REG_VEX_38F3): New.
223 (PREFIX_0FBC): Likewise.
224 (PREFIX_VEX_38F2): Likewise.
225 (PREFIX_VEX_38F3_REG_1): Likewise.
226 (PREFIX_VEX_38F3_REG_2): Likewise.
227 (PREFIX_VEX_38F3_REG_3): Likewise.
228 (PREFIX_VEX_38F7): Likewise.
229 (VEX_LEN_38F2_P_0): Likewise.
230 (VEX_LEN_38F3_R_1_P_0): Likewise.
231 (VEX_LEN_38F3_R_2_P_0): Likewise.
232 (VEX_LEN_38F3_R_3_P_0): Likewise.
233 (VEX_LEN_38F7_P_0): Likewise.
234 (dis386_twobyte): Use PREFIX_0FBC.
235 (reg_table): Add REG_VEX_38F3.
236 (prefix_table): Add PREFIX_0FBC, PREFIX_VEX_38F2,
237 PREFIX_VEX_38F3_REG_1, PREFIX_VEX_38F3_REG_2,
238 PREFIX_VEX_38F3_REG_3 and PREFIX_VEX_38F7.
239 (vex_table): Use PREFIX_VEX_38F2, REG_VEX_38F3 and
241 (vex_len_table): Add VEX_LEN_38F2_P_0, VEX_LEN_38F3_R_1_P_0,
242 VEX_LEN_38F3_R_2_P_0, VEX_LEN_38F3_R_3_P_0 and
245 * i386-gen.c (cpu_flag_init): Add CPU_BMI_FLAGS.
246 (cpu_flags): Add CpuBMI.
248 * i386-opc.h (CpuBMI): New.
249 (i386_cpu_flags): Add cpubmi.
251 * i386-opc.tbl: Add andn, bextr, blsi, blsmsk, blsr and tzcnt.
252 * i386-init.h: Regenerated.
253 * i386-tbl.h: Likewise.
255 2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
257 * i386-dis.c (VexGdq): New.
258 (OP_VEX): Handle dq_mode.
260 2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
262 * i386-gen.c (process_copyright): Update copyright to 2011.
264 For older changes see ChangeLog-2010
270 version-control: never