1 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
3 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
4 * cgen-opc.c (cgen_keyword_add): Ignore special first
5 character when building nonalpha_chars field.
7 2001-06-24 Ben Elliston <bje@redhat.com>
9 * m88k-dis.c: Format to conform to GNU coding standards.
11 2001-06-23 Andreas Jaeger <aj@suse.de>
13 * disassemble.c (disassembler_usage): Add unused attribute.
15 2001-06-22 Eric Christopher <echristo@redhat.com>
17 * mips-opc.c: Move prefx to start of the table.
19 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
21 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
24 2001-06-22 Pauli <pauli@moreton.com.au>
26 * m68k-opc.c: Add wdebug instruction.
28 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
30 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
32 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
34 * cgen-asm.c (cgen_parse_keyword): When looking for the
35 boundaries of a keyword, allow any special characters
36 that are actually in one of the allowed keyword.
37 * cgen-opc.c (cgen_keyword_add): Add any special characters
38 to the nonalpha_chars field.
40 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
42 * s390-opc.c: Add lgh instruction.
43 * s390-opc.txt: Likewise.
45 2001-06-11 Alan Modra <amodra@bigpond.net.au>
47 * i386-dis.c: Group function prototypes in one place.
48 (FLOATCODE): Redefine as 1.
49 (USE_GROUPS): Redefine as 2.
50 (USE_PREFIX_USER_TABLE): Redefine as 3.
51 (X86_64_SPECIAL): Define as 4.
52 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
53 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
54 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
55 (dis386): New table combining above four tables.
56 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
57 (dis386_twobyte): New table combining above two tables.
58 (x86_64_table): New table to handle x86_64.
60 (float_mem_att, float_mem_intel): Delet.
61 (float_mem): New table combining above two tables.
62 (print_insn_i386): Modify for above.
64 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
65 Return 0 on success, 1 if no valid alternative.
66 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
67 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
68 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
69 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
71 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
72 (OP_I64): If not 64-bit mode, call OP_I.
73 OP_OFF64): If not 64-bit mode, call OP_OFF.
74 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
75 'ignore'/'ignored' to 'bytemode'.
77 2001-06-10 Alan Modra <amodra@bigpond.net.au>
79 * configure.in: Sort 'ta' case statement.
80 * configure: Regenerate.
82 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
84 (disx86_64_att): Likewise.
85 (dis386_twobyte_att): Likewise.
86 (print_insn_i386): Don't print branch hints as a prefix.
87 (putop): 'H' macro prints branch hints.
88 (get64): Kill compile warnings.
90 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
92 * sh-opc.h (sh_table): Don't use empty initializers.
94 2001-06-06 Christian Groessler <cpg@aladdin.de>
96 * z8k-dis.c: Fix formatting.
97 (unpack_instr): Remove unused cases in switch statement. Add
98 safety abort() in default case.
99 (unparse_instr): Add safety abort() in default case.
101 2001-06-06 Peter Jakubek <pjak@snafu.de>
103 * m68k-dis.c (print_insn_m68k): Fix typo.
104 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
105 mcf (ColdFire) div, rem and moveb instructions.
107 2001-06-06 Alan Modra <amodra@bigpond.net.au>
109 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
110 (cond_jump_mode, loop_jcxz_mode): Define.
111 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
112 appropriate, and 'F' suffix to loop insns.
113 (disx86_64_att): Likewise.
114 (dis386_twobyte_att): Likewise.
115 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
116 Output data size prefix for long conditional jumps. Output cs and
118 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
119 (OP_J): Don't make PREFIX_DATA used.
121 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
123 * sh-opc.h (sh_table): Complete last element entry to avoid
126 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
128 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
130 2001-05-23 Alan Modra <amodra@one.net.au>
132 * arc-opc.c: Whitespace changes.
134 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
136 * cris-opc.c (cris_spec_regs): Add missing initializer field for
139 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
141 * cgen-dis.in (extract_normal): Complete support for min<base case.
143 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
145 * mips-dis.c (INSNLEN): Rename MAXLEN.
146 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
147 (print_insn_arg): Remove $ prefix of register names.
148 (set_mips_isa_type): Remove.
149 (mips_isa_type): New function.
150 (get_mips_isa): New Function.
151 (print_insn_mips): Rename _print_insn_mips.
152 (_print_insn_mips): New function, contains code which was
153 duplicated in print_insn_big_mips and print_insn_little_mips.
154 (print_insn_big_mips): Moved code to _print_insn_mips.
155 (print_insn_little_mips): Likewise.
156 (print_mips16_insn_arg): Remove $ prefix of register names.
157 Print error message before abort.
159 2001-05-14 J.T. Conklin <jtc@redback.com>
161 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
162 simplified mnemonics used for setting PPC750-specific special
165 2001-05-12 H.J. Lu <hjl@gnu.org>
167 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
170 2001-05-12 Peter Targett <peter.targett@arccores.com>
172 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
173 register to r/w. Formatting fixes throughout file.
175 2001-05-12 Alan Modra <amodra@one.net.au>
177 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
179 (twobyte_has_modrm): Update table.
180 (need_modrm): Give it file scope.
181 (MODRM_CHECK): Define.
182 (dofloat): Use MODRM_CHECK.
187 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
189 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
190 even at end of a section.
191 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
192 by ignoring precariously-unpacked insn_value in favor of raw buffer.
194 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
196 * disassemble.c (disassembler_usage): Remove unused attribute.
198 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
200 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
202 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
204 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
205 assume incoming buffer already has the base insn loaded. Handle
206 smaller-than-base instructions for variable-length case.
208 2001-05-04 Alan Modra <amodra@one.net.au>
210 * i386-dis.c (Ev, Ed): Remove duplicate define.
213 (OP_XS): New function.
214 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
216 (dis386_twobyte_intel): Likewise.
217 (prefix_user_table): Use MS for maskmovq operand.
219 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
221 * Makefile.am: Add OpenRISC target.
222 * Makefile.in: Regenerated.
224 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
226 * configure.in (bfd_openrisc_arch): Add target.
227 * configure: Regenerated.
229 * openrisc-asm.c: New file.
230 * openrisc-desc.c: Likewise.
231 * openrisc-desc.h: Likewise.
232 * openrisc-dis.c: Likewise.
233 * openrisc-ibld.c: Likewise.
234 * openrisc-opc.c: Likewise.
235 * openrisc-opc.h: Likewise.
237 2001-04-24 Christian Groessler <cpg@aladdin.de>
239 * z8k-dis.c: add names of control registers (ctrl_names);
240 (seg_length): provides instruction length fixup for segmented
241 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
242 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
243 (unparse_intr): handle CLASS_PR, print addresses without '#'
244 * z8k-opc.h: re-created with new z8kgen
245 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
246 entries for ldctl/ldctlb instruction
248 2001-04-06 Andreas Jaeger <aj@suse.de>
250 * i386-dis.c: Add ffreep instruction.
252 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
254 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
256 2001-03-24 Alan Modra <alan@linuxcare.com.au>
258 * i386-dis.c (PREGRP25): Define.
259 (dis386_twobyte_att): Use here in place of "movntq" entry.
260 (dis386_twobyte_intel): Likewise.
261 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
263 (dis386_twobyte_att): Use here.
264 (dis386_twobyte_intel): Likewise.
265 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
266 (prefix_user_table <maskmovdqu>): XM operand, not MX.
267 (prefix_user_table): Cosmetic changes to "bad" entries.
269 2001-03-23 Nick Clifton <nickc@redhat.com>
271 * mips-opc.c: Remove extraneous whitespace.
272 * mips-dis.c: Remove extraneous whitespace.
274 2001-03-22 Ben Elliston <bje@redhat.com>
276 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
277 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
278 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
279 to allay a compiler warning.
281 2001-03-22 Alan Modra <alan@linuxcare.com.au>
283 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
284 (dis386_twobyte_intel): Likewise.
285 (twobyte_has_modrm): Set entry for paddq, psubq.
287 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
289 * cgen-dis.in (print_insn_@arch@): Add support for target machine
290 determination via CGEN_COMPUTE_MACH.
291 * fr30-desc.c: Regenerate.
292 * fr30-dis.c: Regenerate.
293 * fr30-opc.h: Regenerate.
294 * m32r-desc.c: Regenerate.
295 * m32r-dis.c: Regenerate.
296 * m32r-opc.h: Regenerate.
297 * m32r-opinst.c: Regenerate.
299 2001-03-20 H.J. Lu <hjl@gnu.org>
301 * configure.in: Remove the redundent AC_ARG_PROGRAM.
302 * configure: Rebuild.
304 2001-03-19 Jim Wilson <wilson@redhat.com>
306 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
307 notestr if larger than xsect.
308 (in_class): Handle format M5.
309 * ia64-asmtab.c: Regnerate.
311 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
313 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
314 has more than one byte left to read.
316 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
318 * s390-opc.c: Add new opcodes. Smooth out formatting.
319 * s390-opc.txt: Add new opcodes.
321 2001-03-06 Nick Clifton <nickc@redhat.com>
323 * arm-dis.c (print_insn_thumb): Compute destination address
324 of BLX(1) instruction by taking bit 1 from PC and not from bit
327 2001-03-06 Igor Shevlyakov <igor@windriver.com>
329 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
330 so command line switches will work.
332 2001-03-05 Dave Brolley <brolley@redhat.com>
334 * fr30-asm.c: Regenerate.
335 * fr30-desc.c: Regenerate.
336 * fr30-desc.h: Regenerate.
337 * fr30-dis.c: Regenerate.
338 * fr30-ibld.c: Regenerate.
339 * fr30-opc.c: Regenerate.
340 * fr30-opc.h: Regenerate.
341 * m32r-asm.c: Regenerate.
342 * m32r-desc.c: Regenerate.
343 * m32r-desc.h: Regenerate.
344 * m32r-dis.c: Regenerate.
345 * m32r-ibld.c: Regenerate.
346 * m32r-opc.c: Regenerate.
347 * m32r-opc.h: Regenerate.
348 * m32r-opinst.c: Regenerate.
350 2001-02-28 Igor Shevlyakov <igor@windriver.com>
352 * m68k-opc.c: fix cpushl according to Motorola. Enable
353 bunch of instructions for Coldfire 5407 and add all new.
355 2001-02-27 Alan Modra <alan@linuxcare.com.au>
357 * configure.in (BFD_VERSION): Do without grep.
358 * configure: Regenerate.
359 * Makefile.am: Run "make dep-am".
360 * Makefile.in: Regenerate.
362 2001-02-23 David Mosberger <davidm@hpl.hp.com>
364 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
365 * ia64-asmtab.c: Regenerate.
367 2001-02-21 David Mosberger <davidm@hpl.hp.com>
369 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
370 separate variants: one for IMM22 and the other for IMM14.
371 * ia64-asmtab.c: Regenerate.
373 2001-02-21 Greg McGary <greg@mcgary.org>
375 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
377 2001-02-20 H.J. Lu <hjl@gnu.org>
379 * Makefile.am (ia64-ic.tbl): Remove the target.
380 (ia64-raw.tbl): Likewise.
381 (ia64-waw.tbl): Likewise.
382 (ia64-war.tbl): Likewise.
383 (ia64-asmtab.c): Generate it in the source directory.
384 * Makefile.in: Regenerated.
386 2001-02-18 lars brinkhoff <lars@nocrew.org>
388 * Makefile.am: Add PDP-11 target.
389 * configure.in: Likewise.
390 * disassemble.c: Likewise.
391 * pdp11-dis.c: New file.
392 * pdp11-opc.c: New file.
394 2001-02-14 Jim Wilson <wilson@redhat.com>
396 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
397 * ia64-asmtab.c: Regenerate.
399 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
401 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
405 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
407 * mips-dis.c (print_insn_arg): Use top four bits of the address of
408 the following instruction not of the jump itself for the jump
410 (print_mips16_insn_arg): Likewise.
412 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
414 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
416 * Makefile.in: Regenerate.
418 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
420 * Makefile.am: Add linux target for S/390.
421 * Makefile.in: Likewise.
422 * configure.in: Likewise.
423 * disassemble.c: Likewise.
424 * s390-dis.c: New file.
425 * s390-mkopc.c: New file.
426 * s390-opc.c: New file.
427 * s390-opc.txt: New file.
429 2001-02-05 Jim Wilson <wilson@redhat.com>
431 * ia64-asmtab.c: Revert 2000-12-16 change.
433 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
435 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
436 * m32r-desc.h: Regenerate.
438 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
440 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
441 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
443 2001-01-14 Alan Modra <alan@linuxcare.com.au>
445 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
447 2001-01-13 Nick Clifton <nickc@redhat.com>
449 * disassemble.c: Remove spurious white space.
451 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
453 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
456 2001-01-11 Peter Targett <peter.targett@arccores.com>
458 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
459 * Makefile.am (C_FILES): Add arc-ext.c.
460 (ALL_MACHINES) Add arc-ext.lo.
461 (INCLUDES) Add opcode directory to list.
462 New dependency entry for arc-ext.lo.
463 * disassemble.c (disassembler): Correct call to
464 arc_get_disassembler.
465 * arc-opc.c: New update for ARC, including full base
466 instructions for ARC variants.
467 * arc-dis.h, arc-dis.c: New update for ARC, including
468 extensibility functionality.
469 * arc-ext.h, arc-ext.c: New files for handling extensibility.
471 2001-01-10 Jan Hubicka <jh@suse.cz>
473 * i386-dis.c (PREGRP15 - PREGRP24): New.
474 (dis386_twobyt): Add SSE2 instructions.
475 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
476 (twobyte_uses_f3_prefix): ... this one.
477 (grps): Add SSE instructions.
478 (prefix_user_table): Add two new slots; add SSE2 instructions.
479 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
480 Handle the REPNZ and Data16 prefixes as well; do proper lookup
481 to prefix_user_table.
482 (OP_E): Accept mfence and lfence as well.
483 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
484 (OP_XMM): Support REX extensions.
488 2001-01-09 Nick Clifton <nickc@redhat.com>
490 * arm-dis.c (print_insn): Set pc to zero for instructions with
491 a reloc associated with them.
493 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
495 * cgen-asm.in (parse_insn_normal): Changed syn to be
496 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
497 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
498 to '\0' to use 0 instead.
499 * cgen-dis.in (print_insn_normal): Ditto.
500 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
502 2001-01-05 Jan Hubicka <jh@suse.cz>
504 * i386-dis.c: Add x86_64 support.
505 (rex): New static variable.
506 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
507 (USED_REX): New macro.
508 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
509 (OP_I64, OP_OFF64, OP_IMREG): New functions.
510 (OP_REG, OP_OFF): Declare.
511 (get64, get32, get32s): New functions.
512 (r??_reg): New constants.
513 (dis386_att): Change templates of instruction implicitly promoted
514 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
516 (dis386_intel): Likewise.
517 (dixx86_64_att): New table based on dis386_att.
518 (dixx86_64_intel): New table based on dis386_intel.
519 (names64, names8rex): New global variable.
520 (names32, names16): Add extended registers.
521 (prefix_user_t): Recognize rex prefixes.
522 (prefix_name): Print REX prefixes nicely.
523 (op_riprel): New global variable.
524 (start_pc): Set type to bfd_vma.
525 (print_insn_i386): Detect the 64bit mode and use proper table;
526 move ckprefix after initializing the buffer; output unused rex prefixes;
527 output information about target of RIP relative addresses.
528 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
529 (print_operand_value): New function.
530 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
531 REX prefix and new modes.
532 (get64, get32s): New.
533 (get32): Return bfd_signed_vma type.
534 (set_op): Initialize the op_riprel.
535 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
537 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
539 cgen-dis.in (read_insn): Use bfd_get_bits()
541 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
543 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
544 (hash_insn_list): Likewise
545 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
546 (extract_1): Use bfd_get_bits().
547 (extract_normal): Apply sign extension to both extraction
549 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
550 (cgen_put_insn_value): Use bfd_put_bits()
552 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
554 * cgen-asm.in (parse_insn_normal): Print better error message for
555 instructions with missing operands.
557 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
559 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
561 2000-12-16 Nick Clifton <nickc@redhat.com>
563 * Makefile.in: Regenerate.
564 * aclocal.m4: Regenerate.
565 * config.in: Regenerate.
566 * configure.in: Add spacing.
567 * configure: Regenerate.
568 * ia64-asmtab.c: Regenerate.
569 * po/opcodes.pot: Regenerate.
571 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
573 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
574 error messages over later parse-time ones.
576 2000-12-12 Jim Wilson <wilson@redhat.com>
578 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
580 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
581 (print_dependency_table): Print NULL if semantics field not set.
582 (insert_opcode_dependencies): Mark cmp parameter as unused.
583 (print_main_table): Use fprintf_vma to print long long fields.
584 (main): Mark argv paramter as unused. Convert to old style definition.
585 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
586 * ia64-asmtab.c: Regnerate.
588 2000-12-09 Nick Clifton <nickc@redhat.com>
590 * m32r-dis.c (print_insn): Prevent re-read of instruction from
593 * fr30-dis.c: Regenerate.
595 2000-12-08 Peter Targett <peter.targett@arccores.com>
597 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
598 * Makefile.am (C_FILES): Add arc-ext.c.
599 (ALL_MACHINES) Add arc-ext.lo.
600 (INCLUDES) Add opcode directory to list.
601 New dependency entry for arc-ext.lo.
602 * disassemble.c (disassembler): Correct call to
603 arc_get_disassembler.
604 * arc-opc.c: New update for ARC, including full base
605 instructions for ARC variants.
606 * arc-dis.h, arc-dis.c: New update for ARC, including
607 extensibility functionality.
608 * arc-ext.h, arc-ext.c: New files for handling extensibility.
610 2000-12-03 Chris Demetriou cgd@sibyte.com
612 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
613 MOD_HILO, and MOD_LO macros.
615 * mips-opc.c (M1, M2): Delete.
616 (mips_builtin_opcodes): Remove all uses of M1.
618 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
619 instructions take "G" format second operands and use the
621 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
623 Delete "sel" code operands from mfc1 and mtc1.
624 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
627 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
628 Chris Demetriou cgd@sibyte.com
630 * mips-opc.c (mips_builtin_opcodes): Finish additions
631 for MIPS32 support, and clean up existing entries for
632 aesthetics, consistency with the MIPS32 ISA, and
633 with consistency the rest of the table.
635 2000-12-01 Nick Clifton <nickc@redhat.com>
637 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
640 2000-12-01 Chris Demetriou <cgd@sibyte.com>
642 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
643 specifiers. Update 'B' for new constant names, and remove
645 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
646 near the top of the array, so they are disassembled properly.
647 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
648 code for MIPS32. Update "clo" and "clz" to use 'U' operand
649 specifier. Add 'H' format specifier variants for "mfc1,"
650 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
651 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
652 "wait" variant which uses 'J' operand specifier.
654 * mips-dis.c (set_mips_isa_type): Update to use
655 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
656 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
657 * mips-opc.c (I32): New constant for instructions added in
660 (mips_builtin_opcodes) Replace all uses of P4 with I32.
662 * mips-dis.c (set_mips_isa_type): Add cases for
663 bfd_mach_mips5 and bfd_mach_mips64.
664 * mips-opc.c (I64): New definitions.
666 * mips-dis.c (set_mips_isa_type): Add case for
669 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
671 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
672 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
673 Initialize variable dc to NULL.
674 (print_insn_shx): Remove unused label d_reg_n.
676 2000-11-24 Nick Clifton <nickc@redhat.com>
678 * arm-opc.h: Add new opcode formatting parameter 'B'.
679 (arm_opcodes): Add XScale, v5, and v5te instructions.
680 (thumb_opcodes): Add v5t instructions.
682 * arm-dis.c (print_insn_arm): Handle new 'B' format
684 (print_insn_thumb): Decode BLX(1) instruction.
686 2000-11-21 Chris Demetriou <cgd@sibyte.com>
688 * mips-opc.c: Fix file header comment.
690 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
692 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
693 print_insn_cris_with_register_prefix.
695 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
697 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
699 2000-11-07 Matthew Green <mrg@redhat.com>
701 * cgen-dis.in (print_insn): All insns which can fit into insn_value
702 must be loaded there in their entirety.
704 2000-10-20 Jakub Jelinek <jakub@redhat.com>
706 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
707 (compute_arch_mask): Add v8plusb and v9b machines.
708 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
709 * sparc-opc.c: Support for Cheetah instruction set.
710 (prefetch_table): Add #invalidate.
712 2000-10-16 Nick Clifton <nickc@redhat.com>
714 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
716 2000-10-06 Dave Brolley <brolley@redhat.com>
718 * fr30-desc.h: Regenerate.
719 * m32r-desc.h: Regenerate.
720 * m32r-ibld.c: Regenerate.
722 2000-10-05 Jim Wilson <wilson@redhat.com>
724 * ia64-ic.tbl: Update from Intel.
725 * ia64-asmtab.c: Regenerate.
727 2000-10-04 Kazu Hirata <kazu@hxi.com>
729 * ia64-gen.c: Convert C++-style comments to C-style comments.
730 * tic54x-dis.c: Likewise.
732 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
734 Changes to add dollar prefix to registers for files where user symbols
735 don't have a leading underscore. Fix formatting.
736 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
737 (format_reg): Add parameter with_reg_prefix. All callers changed.
738 (print_with_operands): Ditto.
739 (print_insn_cris_generic): Renamed from print_insn_cris, add
740 parameter with_reg_prefix.
741 (print_insn_cris_with_register_prefix,
742 print_insn_cris_without_register_prefix, cris_get_disassembler):
744 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
746 2000-09-22 Jim Wilson <wilson@redhat.com>
748 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
749 gt, ge, ngt, and nge.
750 * ia64-asmtab.c: Regenerate.
752 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
753 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
754 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
755 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
756 * ia64-asmtab.c: Regnerate.
758 2000-09-13 Anders Norlander <anorland@acc.umu.se>
760 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
761 Add mfc0 and mtc0 with sub-selection values.
762 Add clo and clz opcodes.
763 Add msub and msubu instructions for MIPS32.
764 Add madd/maddu aliases for mad/madu for MIPS32.
765 Support wait, deret, eret, movn, pref for MIPS32.
766 Support tlbp, tlbr, tlbwi, tlbwr.
769 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
770 (print_insn_arg): Handle 'H' args.
771 (set_mips_isa_type): Recognize 4K.
772 Use CPU_* defines instead of hardcoded numbers.
774 2000-09-11 Catherine Moore <clm@redhat.com>
776 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
777 (d30v_format_tab): Use Rb2 for modinc and moddec.
779 2000-09-07 Catherine Moore <clm@redhat.com>
781 * d30v-opc.c (d30v_format_tab): Use format Ra for
784 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
786 * configure: Rebuilt with new libtool.m4.
788 2000-09-05 Nick Clifton <nickc@redhat.com>
790 * configure: Regenerate.
791 * po/opcodes.pot: Regenerate.
793 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
795 * acinclude.m4: Include libtool and gettext macros from the
797 * aclocal.m4, configure: Rebuilt.
799 2000-08-30 Kazu Hirata <kazu@hxi.com>
801 * tic80-dis.c: Fix formatting.
803 2000-08-29 Kazu Hirata <kazu@hxi.com>
805 * w65-dis.c: Fix formatting.
807 2000-08-28 Mark Hatle <mhatle@mvista.com>
809 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
810 (powerpc_opcodes): Add table entries for PPC 405 instructions.
811 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
812 instructions. Added extended mnemonic mftbl as defined in the
813 405GP manual for all PPCs.
815 2000-08-28 Jim Wilson <wilson@redhat.com>
817 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
818 call. Change last goto to use failed instead of done.
820 2000-08-28 Dave Brolley <brolley@redhat.com>
822 * cgen-ibld.in (cgen_put_insn_int_value): New function.
823 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
824 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
825 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
826 * cgen-dis.in (read_insn): New static function.
827 (print_insn): Use read_insn to read the insn into the buffer and set
829 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
831 * fr30-asm.c: Regenerated.
832 * fr30-desc.c: Regenerated.
833 * fr30-desc.h: Regenerated.
834 * fr30-dis.c: Regenerated.
835 * fr30-ibld.c: Regenerated.
836 * fr30-opc.c: Regenerated.
837 * fr30-opc.h: Regenerated.
838 * m32r-asm.c: Regenerated.
839 * m32r-desc.c: Regenerated.
840 * m32r-desc.h: Regenerated.
841 * m32r-dis.c: Regenerated.
842 * m32r-ibld.c: Regenerated.
843 * m32r-opc.c: Regenerated.
845 2000-08-28 Kazu Hirata <kazu@hxi.com>
847 * tic30-dis.c: Fix formatting.
849 2000-08-27 Kazu Hirata <kazu@hxi.com>
851 * sh-dis.c: Fix formatting.
853 2000-08-24 David Edelsohn <dje@watson.ibm.com>
855 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
857 2000-08-24 Kazu Hirata <kazu@hxi.com>
859 * z8k-dis.c: Fix formatting.
861 2000-08-16 Jim Wilson <wilson@redhat.com>
863 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
864 break, mov-immediate, nop.
865 * ia64-opc-f.c: Delete fpsub instructions.
866 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
867 address operand. Rewrite using macros to avoid long lines.
868 * ia64-opc.h (POSTINC): Define.
869 * ia64-asmtab.c: Regenerate.
871 2000-08-15 Jim Wilson <wilson@redhat.com>
873 * ia64-ic.tbl: Add missing entries.
875 2000-08-08 Jason Eckhardt <jle@redhat.com>
877 * i860-dis.c (print_br_address): Change third argument from int
880 2000-08-07 Richard Henderson <rth@redhat.com>
882 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
883 for MLI templates. Handle IA64_OPND_TGT64.
885 2000-08-04 Ben Elliston <bje@redhat.com>
887 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
890 2000-08-02 Jim Wilson <wilson@redhat.com>
892 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
894 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
896 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
897 Change return type from void to int. Check the combination
898 of operands, return 1 if valid. Fix to avoid BUF overflow.
899 Report undefined combinations of operands in COMMENT.
900 Report internal errors to stderr. Output the adiw/sbiw
901 constant operand in both decimal and hex.
902 (print_insn_avr): Disassemble ldd/std with displacement of 0
903 as ld/st. Check avr_operand () return value, handle invalid
904 combinations of operands like unknown opcodes.
906 2000-07-28 Ben Elliston <bje@redhat.com>
908 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
909 (run-cgen, stamp-m32r, stamp-fr30): New targets.
910 * Makefile.in: Regenerate.
911 * configure.in: Add --enable-cgen-maint option.
912 * configure: Regenerate.
914 2000-07-26 Dave Brolley <brolley@redhat.com>
916 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
917 (cgen_hw_lookup_by_num): Ditto.
918 (cgen_operand_lookup_by_name): Ditto.
919 (print_address): Ditto.
920 (print_keyword): Ditto.
921 * cgen-dis.c (hash_insn_array): Mark unused parameters with
923 * cgen-asm.c (hash_insn_array): Mark unused parameters with
925 (cgen_parse_keyword): Ditto.
927 2000-07-22 Jason Eckhardt <jle@redhat.com>
929 * i860-dis.c: New file.
930 (print_insn_i860): New function.
931 (print_br_address): New function.
932 (sign_extend): New function.
933 (BITWISE_OP): New macro.
934 (I860_REG_PREFIX): New macro.
935 (grnames, frnames, crnames): New structures.
937 * disassemble.c (ARCH_i860): Define.
938 (disassembler): Add check for bfd_arch_i860 to set disassemble
939 function to print_insn_i860.
941 * Makefile.in (CFILES): Added i860-dis.c.
942 (ALL_MACHINES): Added i860-dis.lo.
943 (i860-dis.lo): New dependences.
945 * configure.in: New bits for bfd_i860_arch.
947 * configure: Regenerated.
949 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
951 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
952 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
953 (cris-dis.lo, cris-opc.lo): New rules.
954 * Makefile.in: Rebuild.
955 * configure.in (bfd_cris_arch): New target.
956 * configure: Rebuild.
957 * disassemble.c (ARCH_cris): Define.
958 (disassembler): Support ARCH_cris.
959 * cris-dis.c, cris-opc.c: New files.
960 * po/POTFILES.in, po/opcodes.pot: Regenerate.
962 2000-07-11 Jakub Jelinek <jakub@redhat.com>
964 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
965 Reported by Bill Clarke <llib@computer.org>.
967 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
969 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
970 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
972 2000-07-09 Alan Modra <alan@linuxcare.com.au>
974 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
975 fput_const, extract_3, extract_5_load, extract_5_store,
976 extract_5r_store, extract_5R_store, extract_10U_store,
977 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
978 extract_12, extract_17, extract_22): Prototype.
979 (print_insn_hppa): Rename inner block opcode -> opc to avoid
980 shadowing outer block.
983 2000-07-05 DJ Delorie <dj@redhat.com>
987 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
989 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
991 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
993 * avr-dis.c (avr_operand): Change _ () to _() around all strings
994 marked for translation (exception from the usual coding style).
995 (print_insn_avr): Initialize insn2 to avoid warnings.
997 2000-07-03 Kazu Hirata <kazu@hxi.com>
999 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1000 * h8500-dis.c: Fix formatting.
1002 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1004 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1005 (CLEANFILES): Add DEPA.
1006 * Makefile.in: Regenerate.
1008 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1010 * arm-dis.c (regnames): Add an additional register set to match
1011 the set used by GCC. Make it the default.
1013 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1015 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1017 * Makefile.in: Regenerate.
1019 2000-06-20 H.J. Lu <hjl@gnu.org>
1021 * Makefile.am: Rebuild dependency.
1022 * Makefile.in: Rebuild.
1024 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1026 * Makefile.in, configure: regenerate
1027 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1029 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1031 * configure.in: Recognize m68hc12 and m68hc11.
1032 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1033 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1034 and opcode generation for m68hc11 and m68hc12.
1036 2000-06-16 Nick Duffek <nsd@redhat.com>
1038 * disassemble.c (disassembler): Refer to the PowerPC 620 using
1039 bfd_mach_ppc_620 instead of 620.
1041 2000-06-12 Kazu Hirata <kazu@hxi.com>
1043 * h8300-dis.c: Fix formatting.
1044 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1047 2000-06-09 Denis Chertykov <denisc@overta.ru>
1049 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1051 2000-06-07 Denis Chertykov <denisc@overta.ru>
1053 * avr-dis.c: completely rewritten.
1055 2000-06-02 Kazu Hirata <kazu@hxi.com>
1057 * h8300-dis.c: Follow the GNU coding style.
1058 (bfd_h8_disassemble) Fix a typo.
1060 2000-06-01 Kazu Hirata <kazu@hxi.com>
1062 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1063 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1064 correctly. Fix a typo.
1066 2000-05-31 Nick Clifton <nickc@redhat.com>
1068 * opintl.h (_(String)): Explain why dgettext is used instead of
1071 2000-05-30 Nick Clifton <nickc@redhat.com>
1073 * opintl.h (gettext, dgettext, dcgettext, textdomain,
1074 bindtextdomain): Replace defines with those from intl/libgettext.h
1075 to quieten gcc warnings.
1077 2000-05-26 Alan Modra <alan@linuxcare.com.au>
1079 * Makefile.am: Update dependencies with "make dep-am"
1080 * Makefile.in: Regenerate.
1082 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
1084 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1085 sign-extending operands.
1087 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
1089 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1092 2000-05-21 Nick Clifton <nickc@redhat.com>
1094 * Makefile.am (LIBIBERTY): Define.
1096 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1098 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1099 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1100 (reg_names): Rename to std_reg_names. Change it to a char **
1102 (std_reg_names): New name for reg_names.
1103 (set_mips_isa_type): Set reg_names to point to std_reg_names by
1106 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
1108 * fr30-desc.h: Partially regenerated to account for changed
1109 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1110 * m32r-desc.h: Ditto.
1112 2000-05-15 Nick Clifton <nickc@redhat.com>
1114 * arm-opc.h: Use upper case for flasg in MSR and MRS
1115 instructions. Allow any bit to be set in the field_mask of
1116 the MSR instruction.
1118 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1119 field_mask of an MSR instruction.
1121 2000-05-11 Thomas de Lellis <tdel@windriver.com>
1123 * arm-opc.h: Disassembly of thumb ldsb/ldsh
1124 instructions changed to ldrsb/ldrsh.
1126 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
1128 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1129 target addresses for 'jal' and 'j'.
1131 2000-05-10 Geoff Keating <geoffk@redhat.com>
1133 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1134 also available in common mode when powerpc syntax is being used.
1136 2000-05-08 Alan Modra <alan@linuxcare.com.au>
1138 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1139 (dummy_print_address): Ditto.
1141 2000-05-04 Timothy Wall <twall@redhat.com>
1143 * tic54x-opc.c: New.
1144 * tic54x-dis.c: New.
1145 * disassemble.c (disassembler): Add ARCH_tic54x.
1146 * configure.in: Added tic54x target.
1148 * Makefile.am: Add tic54x dependencies.
1149 * Makefile.in: Ditto.
1151 2000-05-03 J.T. Conklin <jtc@redback.com>
1153 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1154 vector unit operands.
1155 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1156 unit instruction formats.
1157 (PPCVEC): New macro, mask for vector instructions.
1158 (powerpc_operands): Add table entries for above operand types.
1159 (powerpc_opcodes): Add table entries for vector instructions.
1161 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1162 (print_insn_little_powerpc): Likewise.
1163 (print_insn_powerpc): Prepend 'v' when printing vector registers.
1165 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
1167 * configure.in: Add bfd_powerpc_64_arch.
1168 * disassemble.c (disassembler): Use print_insn_big_powerpc for
1171 2000-04-24 Nick Clifton <nickc@redhat.com>
1173 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1176 2000-04-23 Denis Chertykov <denisc@overta.ru>
1178 * avr-dis.c (reg_fmul_d): New. Extract destination register from
1180 (reg_fmul_r): New. Extract source register from FMUL instruction.
1181 (reg_muls_d): New. Extract destination register from MULS instruction.
1182 (reg_muls_r): New. Extract source register from MULS instruction.
1183 (reg_movw_d): New. Extract destination register from MOVW instruction.
1184 (reg_movw_r): New. Extract source register from MOVW instruction.
1185 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1186 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1188 2000-04-22 Timothy Wall <twall@redhat.com>
1190 * ia64-gen.c (general): Add an ordered table of primary
1191 opcode names, as well as priority fields to disassembly data
1192 structures to enforce a preferred disassembly format based on the
1193 ordering of the opcode tables.
1194 (load_insn_classes): Show a useful message if IC tables are missing.
1195 (load_depfile): Ditto.
1196 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1197 distinguish preferred disassembly.
1198 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1199 format. Fix incorrect flag on fma.s/fma.s.s0.
1200 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1201 the highest priority.
1202 * ia64-opc-b.c: Use more abbreviations.
1203 * ia64-asmtab.c: Regenerate.
1205 2000-04-21 Jason Eckhardt <jle@redhat.com>
1207 * hppa-dis.c (extract_16): New function.
1208 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1209 new operand types l,y,&,fe,fE,fx.
1211 2000-04-21 Richard Henderson <rth@redhat.com>
1212 David Mosberger <davidm@hpl.hp.com>
1213 Timothy Wall <twall@redhat.com>
1214 Bob Manson <manson@charmed.cygnus.com>
1215 Jim Wilson <wilson@redhat.com>
1217 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1218 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1219 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1221 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1222 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1223 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1224 * Makefile.in: Rebuild.
1225 * configure Rebuild.
1226 * configure.in (bfd_ia64_arch): New target.
1227 * disassemble.c (ARCH_ia64): Define.
1228 (disassembler): Support ARCH_ia64.
1229 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1230 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1231 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1232 ia64-war.tbl, ia64-waw.tbl: New files.
1234 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1236 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1237 (disassemble): Use them.
1239 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1241 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1242 * Makefile.am: Update dependencies.
1243 * Makefile.in: Regenerate.
1245 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1247 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1248 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1249 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1250 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1251 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1252 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1253 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1254 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1255 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1256 ansidecl.h as sysdep.h includes it.
1258 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1260 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1261 --enable-build-warnings option.
1262 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1263 * Makefile.in, configure: Re-generate.
1265 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1267 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1268 stc GBR,@-<REG_N> is available for arch_sh1_up.
1269 Group parallel processing insn with identical mnemonics together.
1270 Make three-operand psha / pshl come first.
1272 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1274 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1275 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1276 (sh_arg_type): Add A_PC.
1277 (sh_table): Update entries using immediates. Add repeat.
1278 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1279 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1281 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1283 * po/opcodes.pot: Regenerate.
1285 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1286 (DEP): Quote when passing vars to sub-make. Add warning message
1288 (DEP1): Rewrite for "gcc -MM".
1289 (CLEANFILES): Add DEP2.
1290 Update dependencies.
1291 * Makefile.in: Regenerate.
1293 2000-04-03 Denis Chertykov <denisc@overta.ru>
1295 * avr-dis.c: Syntax cleanup.
1296 (add0fff): Print the pc relative address as a signed number.
1297 (add03f8): Likewise.
1299 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1301 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1302 the parameter ATTRIBUTE_UNUSED.
1303 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1305 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1307 * m10300-opc.c: SP-based offsets are always unsigned.
1309 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1311 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1312 [branch always] instead of "undefined".
1314 2000-03-27 Nick Clifton <nickc@redhat.com>
1316 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1317 short instructions, from end of list of long instructions.
1319 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1321 * Makefile.am (CFILES): Add avr-dis.c.
1322 (ALL_MACHINES): Add avr-dis.lo.
1324 2000-03-27 Alan Modra <alan@linuxcare.com>
1326 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1328 (print_insn_avr): Call function via pointer in K&R compatible way.
1329 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1330 add0fff, add03f8): Convert to old style function declaration and
1332 (avrdis_opcode): Add prototype.
1334 2000-03-27 Denis Chertykov <denisc@overta.ru>
1336 * avr-dis.c: New file. AVR disassembler.
1337 * configure.in (bfd_avr_arch): New architecture support.
1338 * disassemble.c: Likewise.
1339 * configure: Regenerate.
1341 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1343 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1345 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1347 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1348 flag to determine if operand is pc-relative.
1350 (d30v_format_table):
1351 (REL6S3): Renamed from IMM6S3.
1352 Added flag OPERAND_PCREL.
1353 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1354 added flag OPERAND_PCREL.
1355 (IMM12S3U): Replaced with REL12S3.
1356 (SHORT_D2, LONG_D): Delay target is pc-relative.
1357 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1358 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1359 using the REL* operands.
1360 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1361 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1362 LONG_Db, using REL* operands.
1363 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1364 (d30v_opcode_table): Use new *r formats.
1366 2000-02-28 Nick Clifton <nickc@redhat.com>
1368 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1369 'signed_overflow_ok_p'.
1371 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1373 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1374 name of the libtool directory.
1375 * Makefile.in: Rebuild.
1377 2000-02-24 Nick Clifton <nickc@redhat.com>
1379 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1380 (cgen_clear_signed_overflow_ok): New function.
1381 (cgen_signed_overflow_ok_p): New function.
1383 2000-02-23 Andrew Haley <aph@redhat.com>
1385 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1386 m32r-ibld.c, m32r-opc.h: Rebuild.
1388 2000-02-23 Linas Vepstas <linas@linas.org>
1390 * i370-dis.c, i370-opc.c: New.
1392 * disassemble.c (ARCH_i370): Define.
1393 (disassembler): Handle it.
1395 * Makefile.am: Add support for Linux/IBM 370.
1396 * configure.in: Likewise.
1398 * Makefile.in: Regenerate.
1399 * configure: Likewise.
1401 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1403 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1404 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1407 2000-02-22 Andrew Haley <aph@redhat.com>
1409 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1411 * mips-opc.c (G6): New define.
1412 (mips_builtin_op): Add "move" definition for -gp32.
1414 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1416 From Grant Erickson <gerickso@Brocade.COM>:
1417 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1419 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
1421 * dis-buf.c (buffer_read_memory): Change `length' param and all int
1424 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1426 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1427 (print_insn_ppi): Likewise.
1428 (print_insn_shx): Use info->mach to select appropriate insn set.
1429 Add support for sh-dsp. Remove FD_REG_N support.
1430 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1431 (sh_arg_type): Likewise. Remove FD_REG_N.
1432 (sh_dsp_reg_nums): New enum.
1433 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1434 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1435 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1436 (arch_sh3_dsp_up): Likewise.
1437 (sh_opcode_info): New field: arch.
1438 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1439 D_REG_N. Fill in arch field. Add sh-dsp insns.
1441 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
1443 * arm-dis.c: Change flavor name from atpcs-special to
1444 special-atpcs to prevent name conflict in gdb.
1445 (get_arm_regname_num_options, set_arm_regname_option,
1446 get_arm_regnames): New functions. API to access the several
1447 flavor of register names. Note: Used by gdb.
1448 (print_insn_thumb): Use the register name entry from the currently
1449 selected flavor for LR and PC.
1451 2000-02-10 Nick Clifton <nickc@redhat.com>
1453 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1455 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1456 "mulsh.h" instructions.
1457 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1459 (print_insn_mcore): Add support for little endian targets.
1460 Add support for MULSH and OPSR classes.
1462 2000-02-07 Nick Clifton <nickc@redhat.com>
1464 * arm-dis.c (parse_arm_diassembler_option): Rename again.
1465 Previous delat did not take.
1467 2000-02-03 Timothy Wall <twall@redhat.com>
1469 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
1470 to adjust target address bounds checking and calculate the
1471 appropriate octet offset into data.
1473 2000-01-27 Nick Clifton <nickc@redhat.com>
1475 * arm-dis.c: (parse_disassembler_option): Rename to
1476 parse_arm_disassembler_option and allow to be exported.
1478 * disassemble.c (disassembler_usage): New function: Print out any
1479 target specific disassembler options.
1480 Call arm_disassembler_options() if the ARM architecture is being
1483 * arm-dis.c (NUM_ELEM): Define this macro if not already
1485 (arm_regname): New struct type for ARM register names.
1486 (arm_toggle_regnames): Delete.
1487 (parse_disassembler_option): Use register name structure.
1488 (print_insn): New function: Combines duplicate code found in
1489 print_insn_big_arm and print_insn_little_arm.
1490 (print_insn_big_arm): Call print_insn.
1491 (print_insn_little_arm): Call print_insn.
1492 (print_arm_disassembler_options): Display list of supported,
1493 ARM specific disassembler options.
1495 2000-01-27 Thomas de Lellis <tdel@windriver.com>
1497 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1498 ARM_STT_16BIT flag as Thumb code symbols.
1500 * arm-dis.c (printf_insn_little_arm): Ditto.
1502 2000-01-25 Thomas de Lellis <tdel@windriver.com>
1504 * arm-dis.c (printf_insn_thumb): Prevent double dumping
1505 of raw thumb instructions.
1507 2000-01-20 Nick Clifton <nickc@redhat.com>
1509 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1511 2000-01-03 Nick Clifton <nickc@cygnus.com>
1513 * arm-dis.c (streq): New macro.
1514 (strneq): New macro.
1515 (force_thumb): ew local variable.
1516 (parse_disassembler_option): New function: Parse a single, ARM
1517 specific disassembler command line switch.
1518 (parse_disassembler_option): Call parse_disassembler_option to
1519 parse individual command line switches.
1520 (print_insn_big_arm): Check force_thumb.
1521 (print_insn_little_arm): Check force_thumb.
1523 For older changes see ChangeLog-9899
1529 version-control: never